* (C) Copyright 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
* (C) Copyright 2007 Pengutronix, Juergen Beisert <j.beisert@pengutronix.de>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
return val;
}
-static void fec_mii_setspeed(struct fec_priv *fec)
+static void fec_mii_setspeed(struct ethernet_regs *eth)
{
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
- &fec->eth->mii_speed);
- debug("%s: mii_speed %08x\n", __func__, readl(&fec->eth->mii_speed));
+ ð->mii_speed);
+ debug("%s: mii_speed %08x\n", __func__, readl(ð->mii_speed));
}
static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr,
return 0;
}
-static void fec_eth_phy_config(struct eth_device *dev)
-{
-#ifdef CONFIG_PHYLIB
- struct fec_priv *fec = (struct fec_priv *)dev->priv;
- struct phy_device *phydev;
-
- if (fec->phy_id < 0) {
- int phy_id;
-
- for (phy_id = 0; phy_id < 32; phy_id++) {
- debug("%s: Probing PHY ID %02x\n", __func__, phy_id);
- phydev = phy_connect(fec->bus, phy_id, dev,
- PHY_INTERFACE_MODE_RGMII);
-
- if (phydev)
- break;
- }
- } else {
- phydev = phy_connect(fec->bus, fec->phy_id, dev,
- PHY_INTERFACE_MODE_RGMII);
- }
- if (phydev) {
- fec->phydev = phydev;
- phy_config(phydev);
- }
-#endif
-}
-
/*
* Do initial configuration of the FEC registers
*/
#endif
#ifdef CONFIG_PHYLIB
- if (!fec->phydev)
- fec_eth_phy_config(edev);
- if (fec->phydev) {
+ {
/* Start up the PHY */
int ret = phy_startup(fec->phydev);
return ret;
}
speed = fec->phydev->speed;
- } else {
- speed = _100BASET;
}
#else
miiphy_wait_aneg(edev);
}
memset(fec->tbd_base, 0, size);
fec_tbd_init(fec);
- flush_dcache_range((unsigned)fec->tbd_base, size);
}
/*
fec_reg_setup(fec);
if (fec->xcv_type != SEVENWIRE)
- fec_mii_setspeed(fec);
+ fec_mii_setspeed(fec->bus->priv);
/*
* Set Opcode/Pause Duration Register
uint32_t size, end;
uint32_t addr;
int timeout = FEC_XFER_TIMEOUT;
+ int ret = 0;
/*
* This routine transmits one frame. This routine only accepts
flush_dcache_range(addr, end);
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
- writel(addr, &fec->tbd_base[fec->tbd_index].data_pointer);
+ writel((unsigned long)packet,
+ &fec->tbd_base[fec->tbd_index].data_pointer);
/*
* update BD's status now
addr = (uint32_t)fec->tbd_base;
flush_dcache_range(addr, addr + size);
+ /*
+ * Below we read the DMA descriptor's last four bytes back from the
+ * DRAM. This is important in order to make sure that all WRITE
+ * operations on the bus that were triggered by previous cache FLUSH
+ * have completed.
+ *
+ * Otherwise, on MX28, it is possible to observe a corruption of the
+ * DMA descriptors. Please refer to schematic "Figure 1-2" in MX28RM
+ * for the bus structure of MX28. The scenario is as follows:
+ *
+ * 1) ARM core triggers a series of WRITEs on the AHB_ARB2 bus going
+ * to DRAM due to flush_dcache_range()
+ * 2) ARM core writes the FEC registers via AHB_ARB2
+ * 3) FEC DMA starts reading/writing from/to DRAM via AHB_ARB3
+ *
+ * Note that 2) does sometimes finish before 1) due to reordering of
+ * WRITE accesses on the AHB bus, therefore triggering 3) before the
+ * DMA descriptor is fully written into DRAM. This results in occasional
+ * corruption of the DMA descriptor.
+ */
+ readl(addr + size - 4);
+
/*
* Enable SmartDMA transmit task
*/
* invalidate data cache to see what's really in RAM. Also, we need
* barrier here.
*/
- invalidate_dcache_range(addr, addr + size);
- while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) {
- if (--timeout < 0)
- return -ETIMEDOUT;
- udelay(1);
- invalidate_dcache_range(addr, addr + size);
+ while (--timeout) {
+ if (!(readl(&fec->eth->x_des_active) & FEC_X_DES_ACTIVE_TDAR))
+ break;
}
- debug("fec_send: status 0x%04x index %d\n",
+ if (!timeout)
+ ret = -EINVAL;
+
+ invalidate_dcache_range(addr, addr + size);
+ if (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY)
+ ret = -EINVAL;
+
+ debug("fec_send: status 0x%x index %d ret %i\n",
readw(&fec->tbd_base[fec->tbd_index].status),
- fec->tbd_index);
+ fec->tbd_index, ret);
/* for next transmission use the other buffer */
if (fec->tbd_index)
fec->tbd_index = 0;
else
fec->tbd_index = 1;
- return 0;
+ return ret;
}
/**
return len;
}
-static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr)
+static void fec_set_dev_name(char *dest, int dev_id)
+{
+ sprintf(dest, (dev_id == -1) ? "FEC" : "FEC%i", dev_id);
+}
+
+#ifdef CONFIG_PHYLIB
+int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
+ struct mii_dev *bus, struct phy_device *phydev)
+#else
+static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
+ struct mii_dev *bus, int phy_id)
+#endif
{
struct eth_device *edev;
struct fec_priv *fec;
- struct mii_dev *bus;
unsigned char ethaddr[6];
uint32_t start;
int ret = 0;
}
fec_reg_setup(fec);
- fec_mii_setspeed(fec);
-
- if (dev_id == -1) {
- sprintf(edev->name, "FEC");
- fec->dev_id = 0;
- } else {
- sprintf(edev->name, "FEC%i", dev_id);
- fec->dev_id = dev_id;
- }
- fec->phy_id = phy_id;
-
- bus = mdio_alloc();
- if (!bus) {
- printf("mdio_alloc failed\n");
- ret = -ENOMEM;
- goto err3;
- }
- bus->read = fec_phy_read;
- bus->write = fec_phy_write;
- sprintf(bus->name, edev->name);
-#ifdef CONFIG_MX28
- /*
- * The i.MX28 has two ethernet interfaces, but they are not equal.
- * Only the first one can access the MDIO bus.
- */
- bus->priv = (struct ethernet_regs *)MXS_ENET0_BASE;
+ fec_set_dev_name(edev->name, dev_id);
+ fec->dev_id = (dev_id == -1) ? 0 : dev_id;
+ fec->bus = bus;
+ fec_mii_setspeed(bus->priv);
+#ifdef CONFIG_PHYLIB
+ fec->phydev = phydev;
+ phy_connect_dev(phydev, edev);
+ /* Configure phy */
+ phy_config(phydev);
#else
- bus->priv = fec->eth;
+ fec->phy_id = phy_id;
#endif
- ret = mdio_register(bus);
- if (ret) {
- printf("mdio_register failed\n");
- free(bus);
- ret = -ENOMEM;
- goto err3;
- }
- fec->bus = bus;
eth_register(edev);
if (fec_get_hwaddr(edev, dev_id, ethaddr) == 0) {
debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
memcpy(edev->enetaddr, ethaddr, 6);
}
- /* Configure phy */
- fec_eth_phy_config(edev);
return ret;
-
err3:
free(fec);
err2:
return ret;
}
-#ifndef CONFIG_FEC_MXC_MULTI
-int fecmxc_initialize(bd_t *bd)
+struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
{
- int lout = 1;
+ struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
+ struct mii_dev *bus;
+ int ret;
- debug("eth_init: fec_probe(PHY %02x FEC: %08x)\n",
- CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
- lout = fec_probe(bd, -1, CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+ bus = mdio_alloc();
+ if (!bus) {
+ printf("mdio_alloc failed\n");
+ return NULL;
+ }
+ bus->read = fec_phy_read;
+ bus->write = fec_phy_write;
+ bus->priv = eth;
+ fec_set_dev_name(bus->name, dev_id);
- return lout;
+ ret = mdio_register(bus);
+ if (ret) {
+ printf("mdio_register failed\n");
+ free(bus);
+ return NULL;
+ }
+ fec_mii_setspeed(eth);
+ return bus;
}
-#endif
int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
{
- int lout = 1;
+ uint32_t base_mii;
+ struct mii_dev *bus = NULL;
+#ifdef CONFIG_PHYLIB
+ struct phy_device *phydev = NULL;
+#endif
+ int ret;
+#ifdef CONFIG_MX28
+ /*
+ * The i.MX28 has two ethernet interfaces, but they are not equal.
+ * Only the first one can access the MDIO bus.
+ */
+ base_mii = MXS_ENET0_BASE;
+#else
+ base_mii = addr;
+#endif
debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
- lout = fec_probe(bd, dev_id, phy_id, addr);
+ bus = fec_get_miibus(base_mii, dev_id);
+ if (!bus)
+ return -ENOMEM;
+#ifdef CONFIG_PHYLIB
+ phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ free(bus);
+ return -ENOMEM;
+ }
+ ret = fec_probe(bd, dev_id, addr, bus, phydev);
+#else
+ ret = fec_probe(bd, dev_id, addr, bus, phy_id);
+#endif
+ if (ret) {
+#ifdef CONFIG_PHYLIB
+ free(phydev);
+#endif
+ free(bus);
+ }
+ return ret;
+}
- return lout;
+#ifdef CONFIG_FEC_MXC_PHYADDR
+int fecmxc_initialize(bd_t *bd)
+{
+ return fecmxc_initialize_multi(bd, -1, CONFIG_FEC_MXC_PHYADDR,
+ IMX_FEC_BASE);
}
+#endif
#ifndef CONFIG_PHYLIB
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
projects / karo-tx-uboot.git / blobdiff