* SPDX-License-Identifier: GPL-2.0+
*/
-#include <malloc.h>
#include <common.h>
-#include <asm/io.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-#include <i2c.h>
-#include <i2s.h>
#include <sound.h>
-#include <asm/arch/sound.h>
-#include "wm8994.h"
-#include "max98095.h"
-/* defines */
-#define SOUND_400_HZ 400
-#define SOUND_BITS_IN_BYTE 8
-
-static struct i2stx_info g_i2stx_pri;
-
-/*
- * get_sound_i2s_values gets values for i2s parameters
- *
- * @param i2stx_info i2s transmitter transfer param structure
- * @param blob FDT blob if enabled else NULL
- */
-static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
-{
-#ifdef CONFIG_OF_CONTROL
- int node;
- int error = 0;
- int base;
-
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- return -1;
- }
-
- /*
- * Get the pre-defined sound specific values from FDT.
- * All of these are expected to be correct otherwise
- * wrong register values in i2s setup parameters
- * may result in no sound play.
- */
- base = fdtdec_get_addr(blob, node, "reg");
- if (base == FDT_ADDR_T_NONE) {
- debug("%s: Missing i2s base\n", __func__);
- return -1;
- }
- i2s->base_address = base;
-
- i2s->audio_pll_clk = fdtdec_get_int(blob,
- node, "samsung,i2s-epll-clock-frequency", -1);
- error |= i2s->audio_pll_clk;
- debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
- i2s->samplingrate = fdtdec_get_int(blob,
- node, "samsung,i2s-sampling-rate", -1);
- error |= i2s->samplingrate;
- debug("samplingrate = %d\n", i2s->samplingrate);
- i2s->bitspersample = fdtdec_get_int(blob,
- node, "samsung,i2s-bits-per-sample", -1);
- error |= i2s->bitspersample;
- debug("bitspersample = %d\n", i2s->bitspersample);
- i2s->channels = fdtdec_get_int(blob,
- node, "samsung,i2s-channels", -1);
- error |= i2s->channels;
- debug("channels = %d\n", i2s->channels);
- i2s->rfs = fdtdec_get_int(blob,
- node, "samsung,i2s-lr-clk-framesize", -1);
- error |= i2s->rfs;
- debug("rfs = %d\n", i2s->rfs);
- i2s->bfs = fdtdec_get_int(blob,
- node, "samsung,i2s-bit-clk-framesize", -1);
- error |= i2s->bfs;
- debug("bfs = %d\n", i2s->bfs);
-
- i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
- error |= i2s->id;
- debug("id = %d\n", i2s->id);
-
- if (error == -1) {
- debug("fail to get sound i2s node properties\n");
- return -1;
- }
-#else
- i2s->base_address = samsung_get_base_i2s();
- i2s->audio_pll_clk = I2S_PLL_CLK;
- i2s->samplingrate = I2S_SAMPLING_RATE;
- i2s->bitspersample = I2S_BITS_PER_SAMPLE;
- i2s->channels = I2S_CHANNELS;
- i2s->rfs = I2S_RFS;
- i2s->bfs = I2S_BFS;
- i2s->id = 0;
-#endif
- return 0;
-}
-
-/*
- * Init codec
- *
- * @param blob FDT blob
- * @param pi2s_tx i2s parameters required by codec
- * @return int value, 0 for success
- */
-static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
-{
- int ret;
- const char *codectype;
-#ifdef CONFIG_OF_CONTROL
- int node;
-
- /* Get the node from FDT for sound */
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- debug("node = %d\n", node);
- return -1;
- }
-
- /*
- * Get the pre-defined sound codec specific values from FDT.
- * All of these are expected to be correct otherwise sound
- * can not be played
- */
- codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
- debug("device = %s\n", codectype);
-#else
- codectype = AUDIO_CODEC;
-#endif
- if (!strcmp(codectype, "wm8994")) {
- /* Check the codec type and initialise the same */
- ret = wm8994_init(blob, pi2s_tx->id + 1,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample, pi2s_tx->channels);
- } else if (!strcmp(codectype, "max98095")) {
- ret = max98095_init(blob, pi2s_tx->id + 1,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample);
- } else {
- debug("%s: Unknown codec type %s\n", __func__, codectype);
- return -1;
- }
-
- if (ret) {
- debug("%s: Codec init failed\n", __func__);
- return -1;
- }
-
- return 0;
-}
-
-int sound_init(const void *blob)
-{
- int ret;
- struct i2stx_info *pi2s_tx = &g_i2stx_pri;
-
- /* Get the I2S Values */
- if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
- debug(" FDT I2S values failed\n");
- return -1;
- }
-
- if (codec_init(blob, pi2s_tx) < 0) {
- debug(" Codec init failed\n");
- return -1;
- }
-
- ret = i2s_tx_init(pi2s_tx);
- if (ret) {
- debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
- ret);
- return ret;
- }
-
-
- return ret;
-}
-
-/*
- * Generates square wave sound data for 1 second
- *
- * @param data data buffer pointer
- * @param size size of the buffer
- * @param freq frequency of the wave
- */
-static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
+void sound_create_square_wave(unsigned short *data, int size, uint32_t freq)
{
const int sample = 48000;
const unsigned short amplitude = 16000; /* between 1 and 32767 */
}
}
}
-
-int sound_play(uint32_t msec, uint32_t frequency)
-{
- unsigned int *data;
- unsigned long data_size;
- unsigned int ret = 0;
-
- /*Buffer length computation */
- data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
- data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
- data = malloc(data_size);
-
- if (data == NULL) {
- debug("%s: malloc failed\n", __func__);
- return -1;
- }
-
- sound_prepare_buffer((unsigned short *)data,
- data_size / sizeof(unsigned short), frequency);
-
- while (msec >= 1000) {
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
- (data_size / sizeof(int)));
- msec -= 1000;
- }
- if (msec) {
- unsigned long size =
- (data_size * msec) / (sizeof(int) * 1000);
-
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
- }
-
- free(data);
-
- return ret;
-}
projects / karo-tx-uboot.git / blobdiff