]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/T104xRDB.h
projects / karo-tx-uboot.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
[karo-tx-uboot.git] / include / configs / T104xRDB.h
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 81b4f31bc6e8323f461b58dde4f71d74719d57be..5e2c100d9309b1b86cbc1ffa06e43031c0ddb076 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -19,10 +19,12 @@
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
 #endif
 #ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
 #endif
 
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -33,7 +35,7 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
-#define CONFIG_SYS_TEXT_BASE           0x00201000
+#define CONFIG_SYS_TEXT_BASE           0x30001000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -49,21 +51,21 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
+#define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x30000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -73,12 +75,12 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
-#define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_DST      (0x30000000)
+#define CONFIG_SYS_MMC_U_BOOT_START    (0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -230,6 +232,12 @@
                                CSPR_MSEL_NOR | \
                                CSPR_V)
 #define CONFIG_SYS_NOR_AMASK   IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE      0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR    CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0   (FTIM0_NOR_TACSE(0x4) | \
@@ -263,6 +271,9 @@
 #define CPLD_LBMAP_DFLTBANK            0x40 /* BANK OR | BANK0 */
 #define CPLD_LBMAP_RESET               0xFF
 #define CPLD_LBMAP_SHIFT               0x03
+#ifdef CONFIG_T1042RDB_PI
+#define CPLD_DIU_SEL_DFP               0x80
+#endif
 
 #define CONFIG_SYS_CPLD_BASE   0xffdf0000
 #define CONFIG_SYS_CPLD_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
@@ -280,7 +291,7 @@
 #define CONFIG_SYS_CS2_FTIM1           (FTIM1_GPCM_TACO(0x0e) | \
                                        FTIM1_GPCM_TRAD(0x1f))
 #define CONFIG_SYS_CS2_FTIM2           (FTIM2_GPCM_TCS(0x0e) | \
-                                       FTIM2_GPCM_TCH(0x0) | \
+                                       FTIM2_GPCM_TCH(0x8) | \
                                        FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS2_FTIM3           0x0
 
@@ -424,6 +435,24 @@
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
+#ifdef CONFIG_T1042RDB_PI
+/* Video */
+#define CONFIG_FSL_DIU_FB
+
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+#endif
+
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
@@ -437,19 +466,29 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED       400000  /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C3_SPEED      400000
+#define CONFIG_SYS_FSL_I2C4_SPEED      400000
 #define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C2_SPEED      400000  /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C3_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C4_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x119000
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
+#define CONFIG_SYS_FSL_I2C3_OFFSET     0x119000
+#define CONFIG_SYS_FSL_I2C4_OFFSET     0x119100
 
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define I2C_MUX_CH_DEFAULT      0x8
 #endif
 
 #ifdef CONFIG_T1042RDB_PI
+/* LDI/DVI Encoder for display */
+#define CONFIG_SYS_I2C_LDI_ADDR                0x38
+#define CONFIG_SYS_I2C_DVI_ADDR                0x75
+
 /*
  * RTC configuration
  */
@@ -467,6 +506,7 @@
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
@@ -597,7 +637,7 @@
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_QE
 #define CONFIG_U_QE
 #endif
@@ -626,7 +666,7 @@
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_QE_FW_ADDR          0x130000
 #elif defined(CONFIG_SDCARD)
@@ -650,7 +690,7 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 #endif
 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
@@ -752,13 +792,20 @@
 #define CONFIG_BAUDRATE        115200
 
 #define __USB_PHY_TYPE utmi
+#define RAMDISKFILE    "t104xrdb/ramdisk.uboot"
 
 #ifdef CONFIG_T1040RDB
 #define FDTFILE                "t1040rdb/t1040rdb.dtb"
-#define RAMDISKFILE    "t1040rdb/ramdisk.uboot"
-#elif CONFIG_T1042RDB_PI
-#define FDTFILE                "t1040rdb_pi/t1040rdb_pi.dtb"
-#define RAMDISKFILE    "t1040rdb_pi/ramdisk.uboot"
+#elif defined(CONFIG_T1042RDB_PI)
+#define FDTFILE                "t1042rdb_pi/t1042rdb_pi.dtb"
+#elif defined(CONFIG_T1042RDB)
+#define FDTFILE                "t1042rdb/t1042rdb.dtb"
+#endif
+
+#ifdef CONFIG_FSL_DIU_FB
+#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
+#else
+#define DIU_ENVIRONMENT
 #endif
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
@@ -766,6 +813,7 @@
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
        "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
        "netdev=eth0\0"                                         \
+       "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
        "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
        "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
        "tftpflash=tftpboot $loadaddr $uboot && "               \
@@ -779,8 +827,7 @@
        "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
        "fdtaddr=c00000\0"                                      \
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
-       "bdev=sda3\0"                                           \
-       "c=ffe\0"
+       "bdev=sda3\0"
 
 #define CONFIG_LINUX                       \
        "setenv bootargs root=/dev/ram rw "            \
UBoot for KaRo TX COM modules