ARM: highbank: use default prompt

[karo-tx-uboot.git] / include / configs / highbank.h

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 62cc08cebd388c06274cec673d22b89ffb53c3d2..a6202cfab446ca30b806f153860fe0f7b92728cb 100644 (file)
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -1,33 +1,27 @@
 /*
  * Copyright 2010-2011 Calxeda, Inc.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_L2_OFF
+#include <config_distro_defaults.h>
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
-#define CFG_HZ                         1000
-#define CONFIG_SYS_HZ                  CFG_HZ
 
-#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
 #define CONFIG_SYS_BOOTMAPSZ           (16 << 20)
 
+#define CONFIG_SYS_TIMER_RATE          (150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER       (0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
 /*
  * Size of malloc() pool
  */
@@ -38,7 +32,7 @@
 #define CONFIG_PL01x_PORTS             { (void *)(0xFFF36000) }
 #define CONFIG_CONS_INDEX              0
 
-#define CONFIG_BAUDRATE                        38400
+#define CONFIG_BAUDRATE                        115200
 
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
@@ -46,6 +40,7 @@
 #define CONFIG_SYS_BOOTCOUNT_ADDR      0xfff3cf0c
 
 #define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    5
@@ -53,46 +48,36 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                        CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CALXEDA_XGMAC
 
-/* PXE support */
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH    0x100
-#define CONFIG_BOOTP_VCI_STRING                "U-boot.armv7.highbank"
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_LOADS
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
 
-#define CONFIG_BOOTDELAY               2
+#define CONFIG_BOOT_RETRY_TIME         -1
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay
+#define CONFIG_AUTOBOOT_KEYED_CTRLC
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP            /* undef to save memory          */
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS             16      /* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT              "Highbank #"
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                         sizeof(CONFIG_SYS_PROMPT)+16)
 
 #define CONFIG_SYS_LOAD_ADDR           0x800000
+#define CONFIG_SYS_64BIT_LBA
+
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map