#define CONFIG_MIMC200_EXT_FLASH 1
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* and the PBA bus to run at 1/4 the PLL frequency.
*/
#define CONFIG_PLL 1
-#define CFG_POWER_MANAGER 1
-#define CFG_OSC0_HZ 10000000
-#define CFG_PLL0_DIV 1
-#define CFG_PLL0_MUL 15
-#define CFG_PLL0_SUPPRESS_CYCLES 16
-#define CFG_CLKDIV_CPU 0
-#define CFG_CLKDIV_HSB 1
-#define CFG_CLKDIV_PBA 2
-#define CFG_CLKDIV_PBB 1
+#define CONFIG_SYS_POWER_MANAGER 1
+#define CONFIG_SYS_OSC0_HZ 10000000
+#define CONFIG_SYS_PLL0_DIV 1
+#define CONFIG_SYS_PLL0_MUL 15
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
+#define CONFIG_SYS_CLKDIV_CPU 0
+#define CONFIG_SYS_CLKDIV_HSB 1
+#define CONFIG_SYS_CLKDIV_PBA 2
+#define CONFIG_SYS_CLKDIV_PBB 1
/*
* The PLLOPT register controls the PLL like this:
*
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
*/
-#define CFG_PLL0_OPT 0x04
+#define CONFIG_SYS_PLL0_OPT 0x04
#define CONFIG_USART1 1
#define CONFIG_MIMC200_DBGLINK 1
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#define CONFIG_DISABLE_CONSOLE 1 /* disable console */
-#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
/*
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
-#define CONFIG_PIO2 1
-#define CFG_NR_PIOS 5
-#define CFG_HSDRAMC 1
+#define CONFIG_PORTMUX_PIO 1
+#define CONFIG_SYS_NR_PIOS 5
+#define CONFIG_SYS_HSDRAMC 1
#define CONFIG_MMC 1
#define CONFIG_ATMEL_MCI 1
-#define CFG_DCACHE_LINESZ 32
-#define CFG_ICACHE_LINESZ 32
+#define CONFIG_SYS_DCACHE_LINESZ 32
+#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
-#define CFG_FLASH_CFI 1
+#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_BASE 0x00000000
-#define CFG_FLASH_SIZE 0x800000
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 135
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_FLASH_SIZE 0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 135
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-#define CFG_FRAM_BASE 0x08000000
-#define CFG_FRAM_SIZE 0x20000
+#define CONFIG_SYS_FRAM_BASE 0x08000000
+#define CONFIG_SYS_FRAM_SIZE 0x20000
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SIZE 65536
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CONFIG_ENV_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-#define CFG_MALLOC_LEN (1024*1024)
-#define CFG_DMA_ALLOC_LEN (16384)
+#define CONFIG_SYS_MALLOC_LEN (1024*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN (16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "U-Boot> "
-#define CFG_CBSIZE 256
-#define CFG_MAXARGS 16
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP 1
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
-#define CFG_MEMTEST_START EBI_SDRAM_BASE
-#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
+#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff