avr32: delete non generic board hammerhead

[karo-tx-uboot.git] / include / configs / mimc200.h

diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 66b9477aaf2d34c94157c669d8ca50d1fb305a50..e8e5ae73ecfa5c774d8e6fadd8821b2b24fded77 100644 (file)
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -3,38 +3,19 @@
  *
  * Configuration settings for the AVR32 Network Gateway
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32
 #define CONFIG_AT32AP
 #define CONFIG_AT32AP7000
 #define CONFIG_MIMC200
 
 #define CONFIG_MIMC200_EXT_FLASH
 
-#define CONFIG_SYS_HZ                          1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
@@ -103,7 +84,6 @@
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
@@ -122,7 +102,6 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
 
 #define CONFIG_ATMEL_USART
 #define CONFIG_MACB
@@ -130,7 +109,8 @@
 #define CONFIG_SYS_NR_PIOS                     5
 #define CONFIG_SYS_HSDRAMC
 #define CONFIG_MMC
-#define CONFIG_ATMEL_MCI
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_GENERIC_MMC
 
 #if defined(CONFIG_LCD)
 #define CONFIG_CMD_BMP
@@ -160,6 +140,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT              135
 
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE           0x00000000
 
 #define CONFIG_SYS_INTRAM_BASE                 INTERNAL_SRAM_BASE
 #define CONFIG_SYS_INTRAM_SIZE                 INTERNAL_SRAM_SIZE
@@ -175,7 +156,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN                  (1024*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN               (16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR                   (EBI_SDRAM_BASE + 0x00400000)