Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / nitrogen6x.h

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 065dc9711b84c25f5efafd54b12edf35de6f4946..ac517ce25ed8c09ac10c35d07bf58871112cbabc 100644 (file)
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -10,6 +10,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "mx6_common.h"
 #define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -30,7 +31,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MXC_GPIO
-#define CONFIG_MV_UDC
+#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
@@ -58,20 +59,10 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
 
-/* OCOTP Configs */
-#define CONFIG_CMD_IMXOTP
-#ifdef CONFIG_CMD_IMXOTP
-#define CONFIG_IMX_OTP
-#define IMX_OTP_BASE                   OCOTP_BASE_ADDR
-#define IMX_OTP_ADDR_MAX               0x7F
-#define IMX_OTP_DATA_ERROR_VAL         0xBADABADA
-#define IMX_OTPWRITE_ENABLED
-#endif
-
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -125,7 +116,8 @@
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MXC_USB_PORT    1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
@@ -188,7 +180,7 @@
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdt_file=imx6q-sabrelite.dtb\0" \
-       "fdt_addr=0x11000000\0" \
+       "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
@@ -305,7 +297,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR          CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                 1000
 
 #define CONFIG_CMDLINE_EDITING
 
@@ -361,4 +352,15 @@
 #define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_CMD_FS_GENERIC
 
+/*
+ * PCI express
+ */
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#endif
+
 #endif        /* __CONFIG_H */