board:tricorder: fixup SPL OOB layout

[karo-tx-uboot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index d57394e55016e7b5f3ec80628e049dc73bc0b49c..80985a2655a180f223bdb11fcb72201beaf8a226 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -63,6 +63,9 @@
 /* GPIO support */
 #define CONFIG_OMAP_GPIO
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_2            /* GPIO32..63 are in GPIO bank 2 */
+
 /* LED support */
 #define CONFIG_STATUS_LED
 #define CONFIG_BOARD_SPECIFIC_LED
@@ -98,11 +101,11 @@
 #define CONFIG_DOS_PARTITION
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
+ 
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
@@ -134,12 +137,11 @@
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
-
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_NAND_OMAP_BCH8
 #define CONFIG_BCH
+#define CONFIG_SYS_NAND_MAX_OOBFREE    2
+#define CONFIG_SYS_NAND_MAX_ECCPOS     56
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -366,14 +368,16 @@
 #define CONFIG_SYS_NAND_OOBSIZE                64
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS         {12, 13, 14, 15, 16, 17, 18, 19, 20,\
-                       21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
-                       34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
-                       47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
-                       60, 61, 62, 63}
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
+                                        13, 14, 16, 17, 18, 19, 20, 21, 22, \
+                                        23, 24, 25, 26, 27, 28, 30, 31, 32, \
+                                        33, 34, 35, 36, 37, 38, 39, 40, 41, \
+                                        42, 44, 45, 46, 47, 48, 49, 50, 51, \
+                                        52, 53, 54, 55, 56}
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       13
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE