karo: tx6: enable bootretry

[karo-tx-uboot.git] / include / configs / tx6.h

diff --git a/include/configs/tx6.h b/include/configs/tx6.h
index 06e6f630f090b143b7a173957d4c61d1a5fc1865..b662f821631a214c3ece482e2216a5b6fd256b87 100644 (file)
--- a/include/configs/tx6.h
+++ b/include/configs/tx6.h
@@ -43,7 +43,6 @@
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_CMD_GPIO
 
-#ifndef CONFIG_TX6_UBOOT_MFG
 /* LCD Logo and Splash screen support */
 #ifdef CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
@@ -51,13 +50,19 @@
 #ifndef CONFIG_SOC_MX6UL
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK               (CONFIG_SYS_SDRAM_CLK * 1000000 / 2)
-#endif
+#else
+#define CONFIG_VIDEO_MXS
+#define MXS_LCDIF_BASE                 0x021c8000UL
+#endif /* CONFIG_SOC_MX6UL */
 #define CONFIG_LCD_LOGO
 #define LCD_BPP                                LCD_COLOR32
 #define CONFIG_CMD_BMP
+#define CONFIG_BMP_8BPP
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #endif /* CONFIG_LCD */
-#endif /* CONFIG_TX6_UBOOT_MFG */
 
 /*
  * Memory configuration options
@@ -79,7 +84,20 @@
 #define CONFIG_SYS_SDRAM_BUS_WIDTH     64
 #endif
 #endif /* CONFIG_SYS_SDRAM_BUS_WIDTH */
-#define PHYS_SDRAM_1_SIZE              (SZ_512M / 32 * CONFIG_SYS_SDRAM_BUS_WIDTH)
+#ifdef __ASSEMBLY__
+#define _AC(x,s)                       x
+#else
+#define _AC(x,s)                       (x##s)
+#endif
+#define UL(x)                          _AC(x,UL)
+#define PHYS_SDRAM_1_SIZE              (UL(CONFIG_SYS_SDRAM_CHIP_SIZE) * SZ_1M \
+                               / 32 * CONFIG_SYS_SDRAM_BUS_WIDTH)
+#if PHYS_SDRAM_1_SIZE > SZ_1G
+#define FDT_HIGH_STR                   "fdt_high=ffffffff\0"
+#else
+#define FDT_HIGH_STR                   ""
+#endif
+
 #ifdef CONFIG_SOC_MX6Q
 #define CONFIG_SYS_SDRAM_CLK           528
 #else
@@ -131,6 +149,9 @@
 #else
 #define CONFIG_BOOTDELAY               0
 #endif
+#define CONFIG_BOOT_RETRY_TIME         -1
+#define CONFIG_BOOT_RETRY_MIN          3
+#define CONFIG_RESET_TO_RETRY
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define DEFAULT_BOOTCMD                        "run bootcmd_${boot_mode} bootm_cmd"
@@ -164,7 +185,7 @@
 #endif
 
 /*
- * Extra Environments
+ * Extra Environment Settings
  */
 #ifdef CONFIG_TX6_UBOOT_NOENV
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -208,12 +229,14 @@
        EMMC_BOOT_PART_STR                                              \
        EMMC_BOOT_ACK_STR                                               \
        "fdtaddr=" xstr(CONFIG_FDTADDR) "\0"                            \
-       CONFIG_SYS_FDTSAVE_CMD                                          \
+       FDT_HIGH_STR                                                    \
+       FDTSAVE_CMD_STR                                                 \
        "mtdids=" MTDIDS_DEFAULT "\0"                                   \
        "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
        "nfsroot=/tftpboot/rootfs\0"                                    \
        "otg_mode=device\0"                                             \
        ROOTPART_UUID_STR                                               \
+       "silent=1\0"                                                    \
        "touchpanel=tsc2007\0"                                          \
        "video_mode=" DEFAULT_VIDEO_MODE "\0"
 #endif /*  CONFIG_ENV_IS_NOWHERE */
@@ -222,7 +245,7 @@
 #define CONFIG_SYS_DEFAULT_BOOT_MODE   "nand"
 #define CONFIG_SYS_BOOT_CMD_NAND                                       \
        "bootcmd_nand=setenv autostart no;run bootargs_ubifs;nboot linux\0"
-#define CONFIG_SYS_FDTSAVE_CMD                                         \
+#define FDTSAVE_CMD_STR                                                        \
        "fdtsave=fdt resize;nand erase.part dtb"                        \
        ";nand write ${fdtaddr} dtb ${fdtsize}\0"
 #define MTD_NAME                       "gpmi-nand"
@@ -236,7 +259,7 @@
 #define CONFIG_SYS_DEFAULT_BOOT_MODE   "mmc"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
 #define CONFIG_SYS_BOOT_CMD_NAND       ""
-#define CONFIG_SYS_FDTSAVE_CMD                                         \
+#define FDTSAVE_CMD_STR                                                        \
        "fdtsave=mmc partconf 0 ${emmc_boot_ack} ${emmc_boot_part} ${emmc_boot_part}" \
        ";mmc write ${fdtaddr} " xstr(CONFIG_SYS_DTB_BLKNO) " 80"       \
        ";mmc partconf 0 ${emmc_boot_ack} ${emmc_boot_part} 0\0"
@@ -257,6 +280,12 @@
 #define CONFIG_BAUDRATE                        115200          /* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, }
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SILENT_CONSOLE
+#define CONFIG_SILENT_CONSOLE_UPDATE_ON_SET
+#define CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC
+#define CONFIG_SILENT_U_BOOT_ONLY
+#define CONFIG_SYS_DEVICE_NULLDEV
 #define CONFIG_CONS_INDEX              1
 
 /*
@@ -274,6 +303,8 @@
 #ifndef CONFIG_SOC_MX6UL
 #define CONFIG_FEC_MXC_PHYADDR         0
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
+#else
+#define FEC_MDIO_BASE_ADDR             ENET_BASE_ADDR
 #endif
 #define CONFIG_FEC_XCV_TYPE            RMII
 #endif
@@ -284,26 +315,35 @@
 #ifdef CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_BASE            I2C1_BASE_ADDR
 #define CONFIG_SYS_I2C_SPEED           400000
+#endif /* CONFIG_HARD_I2C */
 #if defined(CONFIG_TX6_REV)
 #if CONFIG_TX6_REV == 0x1
-#define CONFIG_SYS_I2C_SLAVE           0x3c
 #define CONFIG_LTC3676
-#elif CONFIG_TX6_REV == 0x2
-#define CONFIG_SYS_I2C_SLAVE           0x32
-#define CONFIG_RN5T618
 #elif CONFIG_TX6_REV == 0x3
-#define CONFIG_SYS_I2C_SLAVE           0x33
 #define CONFIG_RN5T567
 #else
 #error Unsupported TX6 module revision
 #endif
-#endif /* CONFIG_TX6_REV */
+#else /* CONFIG_TX6_REV */
+#ifdef CONFIG_SOC_MX6UL
+#ifdef CONFIG_SYS_I2C_SOFT
+/* NOENV U-Boot is used for initial bootstrap.
+ * Since the TAMPER_PIN_DISABLE fuses have to be programmed
+ * to be able to use the TAMPER pins as GPIO to access the
+ * PMIC I2C bus, this is not possible on virgin hardware.
+ */
+#define CONFIG_SYS_I2C_SOFT_SPEED      400000
+#define CONFIG_SYS_I2C_SPEED           CONFIG_SYS_I2C_SOFT_SPEED
+#define CONFIG_SOFT_I2C_GPIO_SCL       IMX_GPIO_NR(5, 0)
+#define CONFIG_SOFT_I2C_GPIO_SDA       IMX_GPIO_NR(5, 1)
+#define CONFIG_SOFT_I2C_READ_REPEATED_START
+#endif /* CONFIG_SYS_I2C_SOFT */
+#else /* !CONFIG_SOC_MX6UL */
 /* autodetect which PMIC is present to derive TX6_REV */
-#ifndef CONFIG_SOC_MX6UL
 #define CONFIG_LTC3676                 /* TX6_REV == 1 */
-#endif
+#endif /*  CONFIG_SOC_MX6UL */
 #define CONFIG_RN5T567                 /* TX6_REV == 3 */
-#endif /* CONFIG_HARD_I2C */
+#endif /* CONFIG_TX6_REV */
 
 #define CONFIG_ENV_OVERWRITE