X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=README;h=61851b3d888c98223832554785a774674c318037;hp=12758dc6e793f3fb27b0520ea7127788921308a2;hb=d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19;hpb=b71bf4add68a4a532196c0bead99ed1753014c2a

diff --git a/README b/README
index 12758dc6e7..61851b3d88 100644
--- a/README
+++ b/README
@@ -1484,13 +1484,6 @@ The following options need to be configured:
 			for your device
 			- CONFIG_USBD_PRODUCTID 0xFFFF
 
-		Some USB device drivers may need to check USB cable attachment.
-		In this case you can enable following config in BoardName.h:
-			CONFIG_USB_CABLE_CHECK
-			This enables function definition:
-			- usb_cable_connected() in include/usb.h
-			Implementation of this function is board-specific.
-
 - ULPI Layer Support:
 		The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
 		the generic ULPI layer. The generic layer accesses the ULPI PHY
@@ -3282,6 +3275,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -3357,6 +3354,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4519,6 +4520,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
 		Enables the RTC32K OSC on AM33xx based plattforms
 
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+		Option to disable subpage write in NAND driver
+		driver that uses this:
+		drivers/mtd/nand/davinci_nand.c
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------