X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=README;h=d8fcd95f9423a877edb04bafa4e34249f29017b2;hp=8114f79e660d3674813b59dc868261b05cc78364;hb=4180b3dba25c2c28cc4502f1c9f1cbad2a9972b8;hpb=fc25fa27e5f439705e9ca42182014e2d75d9f0ae

diff --git a/README b/README
index 8114f79e66..d8fcd95f94 100644
--- a/README
+++ b/README
@@ -264,6 +264,17 @@ e.g. "make cogent_mpc8xx_config". And also configure the cogent
 directory according to the instructions in cogent/README.
 
 
+Sandbox Environment:
+--------------------
+
+U-Boot can be built natively to run on a Linux host using the 'sandbox'
+board. This allows feature development which is not board- or architecture-
+specific to be undertaken on a native platform. The sandbox is also used to
+run some of U-Boot's tests.
+
+See board/sandbox/sandbox/README.sandbox for more details.
+
+
 Configuration Options:
 ----------------------
 
@@ -440,6 +451,12 @@ The following options need to be configured:
 		supported, core will start to execute uboot when wakes up.
 
 - Generic CPU options:
+		CONFIG_SYS_GENERIC_GLOBAL_DATA
+		Defines global data is initialized in generic board board_init_f().
+		If this macro is defined, global data is created and cleared in
+		generic board board_init_f(). Without this macro, architecture/board
+		should initialize global data before calling board_init_f().
+
 		CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
 		Defines the endianess of the CPU. Implementation of those
@@ -740,6 +757,10 @@ The following options need to be configured:
 		boot loader that has already initialized the UART.  Define this
 		variable to flush the UART at init time.
 
+		CONFIG_SERIAL_HW_FLOW_CONTROL
+
+		Define this variable to enable hw flow control in serial driver.
+		Current user of this option is drivers/serial/nsl16550.c driver
 
 - Console Interface:
 		Depending on board, define exactly one serial port
@@ -3297,6 +3318,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -3372,6 +3397,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4534,6 +4563,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
 		Enables the RTC32K OSC on AM33xx based plattforms
 
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+		Option to disable subpage write in NAND driver
+		driver that uses this:
+		drivers/mtd/nand/davinci_nand.c
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------