X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-omap4%2Fsys_proto.h;h=83d858f305c4b5dde57e13aee77cae7252aab786;hp=b338a1566c6df3b02bc8c553ca1df7d23eca2991;hb=939911a64bdf3594651e041f3b24a93b8a380643;hpb=6aff05098864233caf9d24cb020e67b00ada4e3e

diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index b338a1566c..83d858f305 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -14,6 +14,7 @@
 #include <asm/omap_common.h>
 #include <linux/mtd/omap_gpmc.h>
 #include <asm/arch/mux_omap4.h>
+#include <asm/ti-common/sys_proto.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -31,7 +32,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void set_pl310_ctrl_reg(u32 val);
@@ -54,54 +54,4 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);
 void setup_warmreset_time(void);
-
-static inline u32 running_from_sdram(void)
-{
-	u32 pc;
-	asm volatile ("mov %0, pc" : "=r" (pc));
-	return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
-	    (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
-}
-
-static inline u8 uboot_loaded_by_spl(void)
-{
-	/*
-	 * u-boot can be running from sdram either because of configuration
-	 * Header or by SPL. If because of CH, then the romcode sets the
-	 * CHSETTINGS executed bit to true in the boot parameter structure that
-	 * it passes to the bootloader.This parameter is stored in the ch_flags
-	 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
-	 * mandatory section if CH is present.
-	 */
-	if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
-		return 0;
-	else
-		return running_from_sdram();
-}
-/*
- * The basic hardware init of OMAP(s_init()) can happen in 4
- * different contexts:
- *  1. SPL running from SRAM
- *  2. U-Boot running from FLASH
- *  3. Non-XIP U-Boot loaded to SDRAM by SPL
- *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
- *     Configuration Header feature
- *
- * This function finds this context.
- * Defining as inline may help in compiling out unused functions in SPL
- */
-static inline u32 omap_hw_init_context(void)
-{
-#ifdef CONFIG_SPL_BUILD
-	return OMAP_INIT_CONTEXT_SPL;
-#else
-	if (uboot_loaded_by_spl())
-		return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
-	else if (running_from_sdram())
-		return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
-	else
-		return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
-#endif
-}
-
 #endif