X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=board%2FBuS%2Fvl_ma2sc%2Fvl_ma2sc.c;h=da39c8625821965ec747bcb359890c487bcb020a;hp=e2ae6fde6cbbd0f75bf0f3d2937e87ee1370b230;hb=32907339c2f533f1d59362c6100c6a0eeeca4837;hpb=5b9c79a81db80c3f9e50c77477957cd803429af8

diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index e2ae6fde6c..da39c86258 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -8,15 +8,15 @@
 
 #include <config.h>
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91_common.h>
@@ -66,35 +66,22 @@ static void vl_ma2sc_nand_hw_init(void)
 
 	/* Configure RDY/BSY */
 #ifdef CONFIG_SYS_NAND_READY_PIN
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void vl_ma2sc_macb_hw_init(void)
 {
-	unsigned long	erstl;
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_rstc_t	*rstc	= (at91_rstc_t *) ATMEL_BASE_RSTC;
+
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+	at91_phy_reset();
 
 	at91_macb_hw_init();
 }