X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=board%2Fmiromico%2Fhammerhead%2Fhammerhead.c;fp=board%2Fmiromico%2Fhammerhead%2Fhammerhead.c;h=8b3e22cd9ece1ee1d3e21706b2ec52a611706c58;hp=d3875f449dbd7d522e74d004d5785b900f356dee;hb=cb5473205206c7f14cbb1e747f28ec75b48826e2;hpb=92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb

diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index d3875f449d..8b3e22cd9e 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -22,17 +22,15 @@
  * MA 02111-1307 USA
  */
 
-#include "../cpu/at32ap/at32ap700x/sm.h"
-
 #include <common.h>
 #include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -64,14 +62,14 @@ int board_early_init_f(void)
 	/* Enable SDRAM in the EBI mux */
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-	gpio_enable_ebi();
-	gpio_enable_usart1();
+	portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 #if defined(CONFIG_MACB)
-	gpio_enable_macb0();
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
 #endif
 #if defined(CONFIG_MMC)
-	gpio_enable_mmci();
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 	return 0;
 }
@@ -96,18 +94,16 @@ phys_size_t initdram(int board_type)
 	return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
+	return 0;
 }
 
-void gclk_init(void)
+int board_postclk_init(void)
 {
 	/* Hammerhead boards uses GCLK3 as 25MHz output to ethernet PHY */
-
-	/* Select GCLK3 peripheral function */
-	gpio_select_periph_A(GPIO_PIN_PB29, 0);
-
-	/* Enable GCLK3 with no input divider, from OSC0 (crystal) */
-	sm_writel(PM_GCCTRL(3), SM_BIT(CEN));
+	gclk_enable_output(3, PORTMUX_DRIVE_LOW);
+	gclk_set_rate(3, GCLK_PARENT_OSC0, 25000000);
+	return 0;
 }