X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=drivers%2Fmmc%2Fmmc.c;h=55c2c68cdb23218945d0af727632745897278d72;hp=e1461a98dd96e875558ee9713d735235d072711a;hb=cc49da249cf2f380d2fed5571fad65ce6494fc95;hpb=1937e5aa3b0ec0767a36580db654ef8918c09b84 diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index e1461a98dd..55c2c68cdb 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -17,11 +17,6 @@ #include #include "mmc_private.h" -/* Set block count limit because of 16 bit register limit on some hardware*/ -#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 -#endif - static struct list_head mmc_devices; static int cur_dev_num = -1; @@ -37,8 +32,8 @@ int mmc_getwp(struct mmc *mmc) wp = board_mmc_getwp(mmc); if (wp < 0) { - if (mmc->getwp) - wp = mmc->getwp(mmc); + if (mmc->cfg->ops->getwp) + wp = mmc->cfg->ops->getwp(mmc); else wp = 0; } @@ -63,7 +58,7 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) printf("CMD_SEND:%d\n", cmd->cmdidx); printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); - ret = mmc->send_cmd(mmc, cmd, data); + ret = mmc->cfg->ops->send_cmd(mmc, cmd, data); switch (cmd->resp_type) { case MMC_RSP_NONE: printf("\t\tMMC_RSP_NONE\n"); @@ -106,7 +101,7 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) break; } #else - ret = mmc->send_cmd(mmc, cmd, data); + ret = mmc->cfg->ops->send_cmd(mmc, cmd, data); #endif return ret; } @@ -155,6 +150,8 @@ int mmc_send_status(struct mmc *mmc, int timeout) #endif return TIMEOUT; } + if (cmd.response[0] & MMC_STATUS_SWITCH_ERROR) + return SWITCH_ERR; return 0; } @@ -163,6 +160,9 @@ int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; + if (mmc->card_caps & MMC_MODE_DDR_52MHz) + return 0; + cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = len; @@ -253,7 +253,8 @@ static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst) return 0; do { - cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; + cur = (blocks_todo > mmc->cfg->b_max) ? + mmc->cfg->b_max : blocks_todo; if(mmc_read_blocks(mmc, dst, start, cur) != cur) return 0; blocks_todo -= cur; @@ -312,7 +313,7 @@ static int sd_send_op_cond(struct mmc *mmc) * specified. */ cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 : - (mmc->voltages & 0xff8000); + (mmc->cfg->voltages & 0xff8000); if (mmc->version == SD_VERSION_2) cmd.cmdarg |= OCR_HCS; @@ -361,11 +362,11 @@ static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd, cmd->cmdarg = 0; if (use_arg && !mmc_host_is_spi(mmc)) { cmd->cmdarg = - (mmc->voltages & + (mmc->cfg->voltages & (mmc->op_cond_response & OCR_VOLTAGE_MASK)) | (mmc->op_cond_response & OCR_ACCESS_MODE); - if (mmc->host_caps & MMC_MODE_HC) + if (mmc->cfg->host_caps & MMC_MODE_HC) cmd->cmdarg |= OCR_HCS; } err = mmc_send_cmd(mmc, cmd, NULL); @@ -430,7 +431,7 @@ int mmc_complete_op_cond(struct mmc *mmc) mmc->ocr = cmd.response[0]; mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); - mmc->rca = 0; + mmc->rca = 1; return 0; } @@ -505,7 +506,7 @@ static int mmc_change_freq(struct mmc *mmc) err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); if (err) - return err; + return err == SWITCH_ERR ? 0 : err; /* Now check to see that it worked */ err = mmc_send_ext_csd(mmc, ext_csd); @@ -518,10 +519,13 @@ static int mmc_change_freq(struct mmc *mmc) return 0; /* High Speed is set, there are two types: 52MHz and 26MHz */ - if (cardtype & MMC_HS_52MHZ) + if (cardtype & EXT_CSD_CARD_TYPE_52) { + if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) + mmc->card_caps |= MMC_MODE_DDR_52MHz; mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; - else + } else { mmc->card_caps |= MMC_MODE_HS; + } return 0; } @@ -554,6 +558,32 @@ static int mmc_set_capacity(struct mmc *mmc, int part_num) return 0; } +int mmc_select_hwpart(int dev_num, int hwpart) +{ + struct mmc *mmc = find_mmc_device(dev_num); + int ret; + + if (!mmc) + return -1; + + if (mmc->part_num == hwpart) + return 0; + + if (mmc->part_config == MMCPART_NOAVAILABLE) { + printf("Card doesn't support part_switch\n"); + return -1; + } + + ret = mmc_switch_part(dev_num, hwpart); + if (ret) + return -1; + + mmc->part_num = hwpart; + + return 0; +} + + int mmc_switch_part(int dev_num, unsigned int part_num) { struct mmc *mmc = find_mmc_device(dev_num); @@ -578,8 +608,8 @@ int mmc_getcd(struct mmc *mmc) cd = board_mmc_getcd(mmc); if (cd < 0) { - if (mmc->getcd) - cd = mmc->getcd(mmc); + if (mmc->cfg->ops->getcd) + cd = mmc->cfg->ops->getcd(mmc); else cd = 1; } @@ -703,8 +733,8 @@ retry_scr: * This can avoid furthur problem when the card runs in different * mode between the host. */ - if (!((mmc->host_caps & MMC_MODE_HS_52MHz) && - (mmc->host_caps & MMC_MODE_HS))) + if (!((mmc->cfg->host_caps & MMC_MODE_HS_52MHz) && + (mmc->cfg->host_caps & MMC_MODE_HS))) return 0; err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status); @@ -751,16 +781,17 @@ static const int multipliers[] = { static void mmc_set_ios(struct mmc *mmc) { - mmc->set_ios(mmc); + if (mmc->cfg->ops->set_ios) + mmc->cfg->ops->set_ios(mmc); } void mmc_set_clock(struct mmc *mmc, uint clock) { - if (clock > mmc->f_max) - clock = mmc->f_max; + if (clock > mmc->cfg->f_max) + clock = mmc->cfg->f_max; - if (clock < mmc->f_min) - clock = mmc->f_min; + if (clock < mmc->cfg->f_min) + clock = mmc->cfg->f_min; mmc->clock = clock; @@ -877,6 +908,7 @@ static int mmc_startup(struct mmc *mmc) mmc->tran_speed = freq * mult; + mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1); mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf); if (IS_SD(mmc)) @@ -907,6 +939,14 @@ static int mmc_startup(struct mmc *mmc) if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN) mmc->write_bl_len = MMC_MAX_BLOCK_LEN; + if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) { + cmd.cmdidx = MMC_CMD_SET_DSR; + cmd.cmdarg = (mmc->dsr & 0xffff) << 16; + cmd.resp_type = MMC_RSP_NONE; + if (mmc_send_cmd(mmc, &cmd, NULL)) + printf("MMC: SET_DSR failed\n"); + } + /* Select the card, and put it into Transfer Mode */ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ cmd.cmdidx = MMC_CMD_SELECT_CARD; @@ -1017,7 +1057,7 @@ static int mmc_startup(struct mmc *mmc) return err; /* Restrict card's capabilities by what the host can do */ - mmc->card_caps &= mmc->host_caps; + mmc->card_caps &= mmc->cfg->host_caps; if (IS_SD(mmc)) { if (mmc->card_caps & MMC_MODE_4BIT) { @@ -1048,6 +1088,8 @@ static int mmc_startup(struct mmc *mmc) /* An array of possible bus widths in order of preference */ static unsigned ext_csd_bits[] = { + EXT_CSD_DDR_BUS_WIDTH_8, + EXT_CSD_DDR_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_8, EXT_CSD_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_1, @@ -1055,13 +1097,15 @@ static int mmc_startup(struct mmc *mmc) /* An array to map CSD bus widths to host cap bits */ static unsigned ext_to_hostcaps[] = { + [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz, + [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz, [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, }; /* An array to map chosen bus width to an integer */ static unsigned widths[] = { - 8, 4, 1, + 8, 4, 8, 4, 1, }; for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) { @@ -1072,7 +1116,7 @@ static int mmc_startup(struct mmc *mmc) * this bus width, if it's more than 1 */ if (extw != EXT_CSD_BUS_WIDTH_1 && - !(mmc->host_caps & ext_to_hostcaps[extw])) + !(mmc->cfg->host_caps & ext_to_hostcaps[extw])) continue; err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, @@ -1145,7 +1189,7 @@ static int mmc_send_if_cond(struct mmc *mmc) cmd.cmdidx = SD_CMD_SEND_IF_COND; /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ - cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa; + cmd.cmdarg = ((mmc->cfg->voltages & 0xff8000) != 0) << 8 | 0xaa; cmd.resp_type = MMC_RSP_R7; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1161,8 +1205,36 @@ static int mmc_send_if_cond(struct mmc *mmc) return 0; } -int mmc_register(struct mmc *mmc) +/* not used any more */ +int __deprecated mmc_register(struct mmc *mmc) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) + printf("%s is deprecated! use mmc_create() instead.\n", __func__); +#endif + return -1; +} + +struct mmc *mmc_create(const struct mmc_config *cfg, void *priv) +{ + struct mmc *mmc; + + /* quick validation */ + if (cfg == NULL || cfg->ops == NULL || cfg->ops->send_cmd == NULL || + cfg->f_min == 0 || cfg->f_max == 0 || cfg->b_max == 0) + return NULL; + + mmc = calloc(1, sizeof(*mmc)); + if (mmc == NULL) + return NULL; + + mmc->cfg = cfg; + mmc->priv = priv; + + /* the following chunk was mmc_register() */ + + /* Setup dsr related values */ + mmc->dsr_imp = 0; + mmc->dsr = 0xffffffff; /* Setup the universal parts of the block interface just once */ mmc->block_dev.if_type = IF_TYPE_MMC; mmc->block_dev.dev = cur_dev_num++; @@ -1170,14 +1242,21 @@ int mmc_register(struct mmc *mmc) mmc->block_dev.block_read = mmc_bread; mmc->block_dev.block_write = mmc_bwrite; mmc->block_dev.block_erase = mmc_berase; - if (!mmc->b_max) - mmc->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; - INIT_LIST_HEAD (&mmc->link); + /* setup initial part type */ + mmc->block_dev.part_type = mmc->cfg->part_type; - list_add_tail (&mmc->link, &mmc_devices); + INIT_LIST_HEAD(&mmc->link); - return 0; + list_add_tail(&mmc->link, &mmc_devices); + + return mmc; +} + +void mmc_destroy(struct mmc *mmc) +{ + /* only freeing memory for now */ + free(mmc); } #ifdef CONFIG_PARTITIONS @@ -1195,7 +1274,8 @@ int mmc_start_init(struct mmc *mmc) { int err; - if (mmc_getcd(mmc) == 0) { + /* we pretend there's no card when init is NULL */ + if (mmc_getcd(mmc) == 0 || mmc->cfg->ops->init == NULL) { mmc->has_init = 0; #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC: no card present\n"); @@ -1206,7 +1286,8 @@ int mmc_start_init(struct mmc *mmc) if (mmc->has_init) return 0; - err = mmc->init(mmc); + /* made sure it's not NULL earlier */ + err = mmc->cfg->ops->init(mmc); if (err) return err; @@ -1267,10 +1348,13 @@ static int mmc_complete_init(struct mmc *mmc) int mmc_init(struct mmc *mmc) { int err = IN_PROGRESS; - unsigned start = get_timer(0); + unsigned start; if (mmc->has_init) return 0; + + start = get_timer(0); + if (!mmc->init_in_progress) err = mmc_start_init(mmc); @@ -1280,6 +1364,12 @@ int mmc_init(struct mmc *mmc) return err; } +int mmc_set_dsr(struct mmc *mmc, u16 val) +{ + mmc->dsr = val; + return 0; +} + /* * CPU and board-specific MMC initializations. Aliased function * signals caller to move on @@ -1302,7 +1392,7 @@ void print_mmc_devices(char separator) list_for_each(entry, &mmc_devices) { m = list_entry(entry, struct mmc, link); - printf("%s: %d", m->name, m->block_dev.dev); + printf("%s: %d", m->cfg->name, m->block_dev.dev); if (entry->next != &mmc_devices) printf("%c ", separator); @@ -1424,67 +1514,56 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, } /* - * This function shall form and send the commands to open / close the - * boot partition specified by user. - * - * Input Parameters: - * ack: 0x0 - No boot acknowledge sent (default) - * 0x1 - Boot acknowledge sent during boot operation - * part_num: User selects boot data that will be sent to master - * 0x0 - Device not boot enabled (default) - * 0x1 - Boot partition 1 enabled for boot - * 0x2 - Boot partition 2 enabled for boot - * access: User selects partitions to access - * 0x0 : No access to boot partition (default) - * 0x1 : R/W boot partition 1 - * 0x2 : R/W boot partition 2 - * 0x3 : R/W Replay Protected Memory Block (RPMB) + * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH + * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH + * and BOOT_MODE. * * Returns 0 on success. */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode) { int err; - struct mmc_cmd cmd; - - /* Boot ack enable, boot partition enable , boot partition access */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_PART_CONF << 16) | - ((EXT_CSD_BOOT_ACK(ack) | - EXT_CSD_BOOT_PART_NUM(part_num) | - EXT_CSD_PARTITION_ACCESS(access)) << 8); + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH, + EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) | + EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) | + EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width)); - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - if (access) { - debug("mmc boot partition#%d open fail:Error1 = %d\n", - part_num, err); - } else { - debug("mmc boot partition#%d close fail:Error = %d\n", - part_num, err); - } + if (err) return err; - } + return 0; +} - if (access) { - /* 4bit transfer mode at booting time. */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; +/* + * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG) + * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and + * PARTITION_ACCESS. + * + * Returns 0 on success. + */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_BOOT_BUS_WIDTH << 16) | - ((1 << 0) << 8); + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, + EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)); - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - debug("mmc boot partition#%d open fail:Error2 = %d\n", - part_num, err); - return err; - } - } + if (err) + return err; return 0; } + +/* + * Modify EXT_CSD[162] which is RST_n_FUNCTION based on the given value + * for enable. Note that this is a write-once field for non-zero values. + * + * Returns 0 on success. + */ +int mmc_set_rst_n_function(struct mmc *mmc, u8 enable) +{ + return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_RST_N_FUNCTION, + enable); +} #endif