X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=drivers%2Fmtd%2Fspi%2Fsf_internal.h;h=5b7670c9aaf1219e841cd2dfc5096bb62e7e3390;hp=19d49146ebd1520d9f6a481765acdbd884b384ee;hb=ff0960f9a018952cbaab59c0d87b6e0338c8f04c;hpb=0043b1faa7f8a6b9a38ac949335cf3a5c3074459

diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 19d49146eb..5b7670c9aa 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -10,6 +10,36 @@
 #ifndef _SF_INTERNAL_H_
 #define _SF_INTERNAL_H_
 
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
+enum spi_dual_flash {
+	SF_SINGLE_FLASH	= 0,
+	SF_DUAL_STACKED_FLASH	= 1 << 0,
+	SF_DUAL_PARALLEL_FLASH	= 1 << 1,
+};
+
+/* Enum list - Full read commands */
+enum spi_read_cmds {
+	ARRAY_SLOW		= 1 << 0,
+	DUAL_OUTPUT_FAST	= 1 << 1,
+	DUAL_IO_FAST		= 1 << 2,
+	QUAD_OUTPUT_FAST	= 1 << 3,
+	QUAD_IO_FAST		= 1 << 4,
+};
+
+#define RD_EXTN	(ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
+#define RD_FULL	(RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
+
+/* sf param flags */
+enum {
+	SECT_4K		= 1 << 0,
+	SECT_32K	= 1 << 1,
+	E_FSR		= 1 << 2,
+	WR_QPP		= 1 << 3,
+};
+
 #define SPI_FLASH_3B_ADDR_LEN		3
 #define SPI_FLASH_CMD_LEN		(1 + SPI_FLASH_3B_ADDR_LEN)
 #define SPI_FLASH_16MB_BOUN		0x1000000
@@ -30,12 +60,12 @@
 #define CMD_WRITE_STATUS		0x01
 #define CMD_PAGE_PROGRAM		0x02
 #define CMD_WRITE_DISABLE		0x04
-#define CMD_READ_STATUS			0x05
+#define CMD_READ_STATUS		0x05
 #define CMD_QUAD_PAGE_PROGRAM		0x32
 #define CMD_READ_STATUS1		0x35
 #define CMD_WRITE_ENABLE		0x06
-#define CMD_READ_CONFIG			0x35
-#define CMD_FLAG_STATUS			0x70
+#define CMD_READ_CONFIG		0x35
+#define CMD_FLAG_STATUS		0x70
 
 /* Read commands */
 #define CMD_READ_ARRAY_SLOW		0x03
@@ -57,7 +87,7 @@
 /* Common status */
 #define STATUS_WIP			(1 << 0)
 #define STATUS_QEB_WINSPAN		(1 << 1)
-#define STATUS_QEB_MXIC			(1 << 6)
+#define STATUS_QEB_MXIC		(1 << 6)
 #define STATUS_PEC			(1 << 7)
 
 #ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
@@ -66,19 +96,42 @@
 
 /* Flash timeout values */
 #define SPI_FLASH_PROG_TIMEOUT		(2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT	(5 * CONFIG_SYS_HZ)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT		(5 * CONFIG_SYS_HZ)
 #define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CONFIG_SYS_HZ)
 
 /* SST specific */
 #ifdef CONFIG_SPI_FLASH_SST
-# define SST_WP			0x01	/* Supports AAI word program */
+# define SST_WP		0x01	/* Supports AAI word program */
 # define CMD_SST_BP		0x02    /* Byte Program */
-# define CMD_SST_AAI_WP		0xAD	/* Auto Address Incr Word Program */
+# define CMD_SST_AAI_WP	0xAD	/* Auto Address Incr Word Program */
 
 int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
 		const void *buf);
 #endif
 
+/**
+ * struct spi_flash_params - SPI/QSPI flash device params structure
+ *
+ * @name:		Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
+ * @jedec:		Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
+ * @ext_jedec:		Device ext_jedec ID
+ * @sector_size:	Sector size of this device
+ * @nr_sectors:	No.of sectors on this device
+ * @e_rd_cmd:		Enum list for read commands
+ * @flags:		Important param, for flash specific behaviour
+ */
+struct spi_flash_params {
+	const char *name;
+	u32 jedec;
+	u16 ext_jedec;
+	u32 sector_size;
+	u32 nr_sectors;
+	u8 e_rd_cmd;
+	u16 flags;
+};
+
+extern const struct spi_flash_params spi_flash_params_table[];
+
 /* Send a single-byte command to the device and read the response */
 int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);