X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100.h;h=9c81e3199f916d49d498d6ce3c5a7bd68ec95aec;hp=7ac51b543ca1a92a191001f68e4d09ae391e1c5f;hb=3d5920a31bb846249385e1ca5c086662c39bc44e;hpb=4e0018f1cf91b3f38f8478d6a174c198b72fe6df diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 7ac51b543c..9c81e3199f 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -3,51 +3,35 @@ * * Configuration settings for the AVR32 Network Gateway * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include -#define CONFIG_AVR32 1 -#define CONFIG_AT32AP 1 -#define CONFIG_AT32AP7000 1 -#define CONFIG_ATNGW100 1 - -#define CFG_HZ 1000 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100 /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. */ -#define CONFIG_PLL 1 -#define CFG_POWER_MANAGER 1 -#define CFG_OSC0_HZ 20000000 -#define CFG_PLL0_DIV 1 -#define CFG_PLL0_MUL 7 -#define CFG_PLL0_SUPPRESS_CYCLES 16 -#define CFG_CLKDIV_CPU 0 -#define CFG_CLKDIV_HSB 1 -#define CFG_CLKDIV_PBA 2 -#define CFG_CLKDIV_PBB 1 +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +#define CONFIG_SYS_CLKDIV_CPU 0 +#define CONFIG_SYS_CLKDIV_HSB 1 +#define CONFIG_SYS_CLKDIV_PBA 2 +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 /* * The PLLOPT register controls the PLL like this: @@ -56,16 +40,16 @@ * * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). */ -#define CFG_PLL0_OPT 0x04 - -#define CONFIG_USART1 1 +#define CONFIG_SYS_PLL0_OPT 0x04 +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 /* User serviceable stuff */ -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_STACKSIZE (2048) @@ -80,10 +64,10 @@ * data on the serial line may interrupt the boot sequence. */ #define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT 1 -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " @@ -92,8 +76,7 @@ * should be generated and assigned to the environment variables * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_OVERWRITE_ETHADDR_ONCE /* * BOOTP/DHCP options @@ -101,8 +84,6 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY -#define CONFIG_DOS_PARTITION 1 - /* * Command line configuration. */ @@ -117,64 +98,67 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG -#define CONFIG_ATMEL_USART 1 -#define CONFIG_MACB 1 -#define CONFIG_PIO2 1 -#define CFG_NR_PIOS 5 -#define CFG_HSDRAMC 1 -#define CONFIG_MMC 1 -#define CONFIG_ATMEL_SPI 1 +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH 1 -#define CONFIG_SPI_FLASH_ATMEL 1 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL -#define CFG_DCACHE_LINESZ 32 -#define CFG_ICACHE_LINESZ 32 +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 #define CONFIG_NR_DRAM_BANKS 1 -#define CFG_FLASH_CFI 1 -#define CFG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_BASE 0x00000000 -#define CFG_FLASH_SIZE 0x800000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 135 +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 -#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 -#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE -#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CFG_SDRAM_BASE EBI_SDRAM_BASE +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 65536 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) -#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) -#define CFG_MALLOC_LEN (256*1024) -#define CFG_DMA_ALLOC_LEN (16384) +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) -#define CFG_BOOTPARAMS_LEN (16 * 1024) +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "U-Boot> " -#define CFG_CBSIZE 256 -#define CFG_MAXARGS 16 -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_LONGHELP 1 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP -#define CFG_MEMTEST_START EBI_SDRAM_BASE -#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000) +#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) -#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } #endif /* __CONFIG_H */