X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fatstk1006.h;h=cbf17dbd5f3efdd181f07f1f469487e409cf00d8;hp=9fd49a53a34d30c0490624d482596b4a5810d624;hb=e27ca76117689e29b6134850aa85de0edc22913f;hpb=7a68389a231ac061ba2ffd628f86e15ed0545a7b diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 9fd49a53a3..cbf17dbd5f 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -3,75 +3,54 @@ * * Configuration settings for the ATSTK1002 CPU daughterboard * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include -#define CONFIG_AVR32 1 -#define CONFIG_AT32AP 1 -#define CONFIG_AT32AP7000 1 -#define CONFIG_ATSTK1006 1 -#define CONFIG_ATSTK1000 1 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATSTK1006 +#define CONFIG_ATSTK1000 -#define CONFIG_ATSTK1000_EXT_FLASH 1 - -/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CFG_HZ 1000 /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. - * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz */ -#define CONFIG_PLL 1 -#define CFG_POWER_MANAGER 1 -#define CFG_OSC0_HZ 20000000 -#define CFG_PLL0_DIV 1 -#define CFG_PLL0_MUL 7 -#define CFG_PLL0_SUPPRESS_CYCLES 16 +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 /* * Set the CPU running at: - * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz */ -#define CFG_CLKDIV_CPU 0 +#define CONFIG_SYS_CLKDIV_CPU 0 /* * Set the HSB running at: - * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz */ -#define CFG_CLKDIV_HSB 1 +#define CONFIG_SYS_CLKDIV_HSB 1 /* * Set the PBA running at: - * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz */ -#define CFG_CLKDIV_PBA 2 +#define CONFIG_SYS_CLKDIV_PBA 2 /* * Set the PBB running at: - * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz */ -#define CFG_CLKDIV_PBB 1 +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 /* * The PLLOPT register controls the PLL like this: @@ -80,19 +59,17 @@ * * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). */ -#define CFG_PLL0_OPT 0x04 +#define CONFIG_SYS_PLL0_OPT 0x04 -#undef CONFIG_USART0 -#define CONFIG_USART1 1 -#undef CONFIG_USART2 -#undef CONFIG_USART3 +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 /* User serviceable stuff */ -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_STACKSIZE (2048) @@ -103,25 +80,14 @@ #define CONFIG_BOOTCOMMAND \ "fsload; bootm $(fileaddr)" -/* - * Only interrupt autoboot if is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ #define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT 1 -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " /* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_OVERWRITE_ETHADDR_ONCE /* * BOOTP options @@ -142,62 +108,61 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG -#define CONFIG_ATMEL_USART 1 -#define CONFIG_MACB 1 -#define CONFIG_PIO2 1 -#define CFG_NR_PIOS 5 -#define CFG_HSDRAMC 1 -#define CONFIG_MMC 1 +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC -#define CFG_DCACHE_LINESZ 32 -#define CFG_ICACHE_LINESZ 32 +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 #define CONFIG_NR_DRAM_BANKS 1 -/* External flash on STK1000 */ -#if 0 -#define CFG_FLASH_CFI 1 -#define CFG_FLASH_CFI_DRIVER 1 -#endif +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_BASE 0x00000000 -#define CFG_FLASH_SIZE 0x800000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 135 +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 -#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 -#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE -#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CFG_SDRAM_BASE EBI_SDRAM_BASE +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 65536 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) -#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) -#define CFG_MALLOC_LEN (256*1024) -#define CFG_DMA_ALLOC_LEN (16384) +#define CONFIG_SYS_MALLOC_LEN (256*1024) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) -#define CFG_BOOTPARAMS_LEN (16 * 1024) +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CFG_PROMPT "U-Boot> " -#define CFG_CBSIZE 256 -#define CFG_MAXARGS 16 -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_LONGHELP 1 - -#define CFG_MEMTEST_START EBI_SDRAM_BASE -#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000) -#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x3f00000) +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } #endif /* __CONFIG_H */