X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fbf561-ezkit.h;h=efbc6c21d9555df87c5a6e9239b40804863f74cb;hp=33c7e1874810b1e15077d1c880efe5d8ac4fa089;hb=5c27b3b75988f13e313e028dc6849c5c531a5f75;hpb=909e9bf3ae6195ac6d52f9e453fba2be8e7e947f

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 33c7e18748..efbc6c21d9 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -60,13 +60,10 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x2C010300
 #define CONFIG_SMC_USE_32_BIT	1
 #define CONFIG_HOSTNAME		bf561-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 
 
 /*
@@ -80,42 +77,35 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	135
 /* The BF561-EZKIT uses a top boot flash */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_OFFSET	(0x800000 - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
-	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
-#endif
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	0x2000
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#endif
 
 /*
  * Misc Settings
  */
 #define CONFIG_UART_CONSOLE	0
 
+/*
+ * Run core 1 from L1 SRAM start address when init uboot on core 0
+ */
+/* #define CONFIG_CORE1_RUN	1 */
+
 
 /*
  * Pull in common ADI header for remaining command/environment setup