X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fdavinci_dvevm.h;h=b045e80ae6ca0f64e559fd5dbc12f5871ce1957c;hp=6885b2cbde0110be414ef6fb96f6d8f233571e95;hb=0bf7de838096e804f0cece8f2d94905477381b6e;hpb=cb5473205206c7f14cbb1e747f28ec75b48826e2

diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 6885b2cbde..b045e80ae6 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * Define this to make U-Boot skip low level initialization when loaded
@@ -52,14 +51,15 @@
 #define DV_EVM
 #define CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CONFIG_SYS_HZ			1000
+#define CONFIG_SOC_DM644X
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
@@ -85,9 +85,9 @@
 /*====================*/
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size, byteorder */
 #define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550_CLK	CONFIG_SYS_HZ_CLOCK	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -108,27 +108,37 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
+#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
 #ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_NAND_DAVINCI
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
 #ifdef CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
-#define CONFIG_ENV_SIZE		SZ_16K
+#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		\
+	"nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT	\
+	"mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
 #else
 #define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CONFIG_ENV_SIZE		SZ_128K
+#define CONFIG_ENV_SIZE		(128 << 10)	/* 128 KiB */
 #endif
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
-#define NAND_MAX_CHIPS		1
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define DEF_BOOTM		""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
@@ -172,6 +182,8 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
+#define CONFIG_MUSB_HCD
+#define CONFIG_USB_DAVINCI
 /*===================*/
 /* Linux Information */
 /*===================*/
@@ -204,6 +216,22 @@
 #else
 #error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
 #endif
+/*==========================*/
+/* USB MSC support (if any) */
+/*==========================*/
+#ifdef CONFIG_USB_DAVINCI
+#define CONFIG_CMD_USB
+#ifdef CONFIG_MUSB_HCD
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_STORAGE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif
+#endif
 /*=======================*/
 /* KGDB support (if any) */
 /*=======================*/