X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fsmdk2410.h;h=d4ae19f96cec077c4c92e176cbd8eeafc07ffe39;hp=a4a675bedd154e848d3409315e32da307bc21b55;hb=9a6a109f0775be316810a3c449c47c0e27d7e477;hpb=033cd2c42bf335d3b96e9612695f6c30b83dce2b

diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index a4a675bedd..d4ae19f96c 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -7,23 +7,7 @@
  *
  * Configuation settings for the SAMSUNG SMDK2410 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -45,8 +29,6 @@
 /* input clock of PLL (the SMDK2410 has 12MHz input clock) */
 #define CONFIG_SYS_CLK_FREQ	12000000
 
-#undef CONFIG_USE_IRQ		/* we don't need IRQ/FIQ stuff */
-
 #define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -54,7 +36,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900		/* we have a CS8900 on-board */
 #define CONFIG_CS8900_BASE	0x19000300
 #define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
@@ -69,6 +50,7 @@
  * USB support (currently only works with D-cache off)
  ************************************************************/
 #define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
@@ -105,7 +87,6 @@
 #define CONFIG_CMD_USB
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 
 /* autoboot */
@@ -120,8 +101,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
@@ -136,35 +115,18 @@
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-/* may be activated as soon as s3c24x0 has print_cpuinfo support */
-/*#define CONFIG_DISPLAY_CPUINFO*/		/* Display cpu info */
+#define CONFIG_DISPLAY_CPUINFO				/* Display cpu info */
 
 #define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x33F00000	/* 63 MB in DRAM */
 
 #define CONFIG_SYS_LOAD_ADDR		0x30800000
 
-#define CONFIG_SYS_HZ			1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /* support additional compression methods */
 #define CONFIG_BZIP2
 #define CONFIG_LZO
 #define CONFIG_LZMA
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -212,7 +174,6 @@
 #define CONFIG_NAND_S3C2410
 #define CONFIG_SYS_S3C2410_NAND_HWECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
 #define CONFIG_SYS_NAND_BASE		0x4E000000
 #endif