X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fspc1920.h;h=127de000f0f2c3660a434fe6e169751fe3c76a8b;hp=09bbebdce899407d9e390c77092e05682cde7b15;hb=50827a5991bb345319bd0ce76f5e2402fac0c391;hpb=67fea022fa957f59653b5238c7496f80a6b70432 diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 09bbebdce8..127de000f0 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -4,20 +4,7 @@ * * Configuation settings for the SPC1920 board. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __H @@ -26,32 +13,30 @@ #define CONFIG_SPC1920 1 /* SPC1920 board */ #define CONFIG_MPC885 1 /* MPC885 CPU */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE #define CONFIG_MII -/* #define MII_DEBUG */ -/* #define CONFIG_FEC_ENET */ +#define CONFIG_MII_INIT 1 #undef CONFIG_ETHER_ON_FEC1 #define CONFIG_ETHER_ON_FEC2 #define FEC_ENET -/* #define CONFIG_FEC2_PHY_NORXERR */ -/* #define CFG_DISCOVER_PHY */ -/* #define CONFIG_PHY_ADDR 0x1 */ #define CONFIG_FEC2_PHY 1 #define CONFIG_BAUDRATE 19200 /* use PLD CLK4 instead of brg */ -#define CFG_SPC1920_SMC1_CLK4 +#define CONFIG_SYS_SPC1920_SMC1_CLK4 #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 -#define CFG_8xx_CPUCLK_MIN 40000000 -#define CFG_8xx_CPUCLK_MAX 133000000 +#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 +#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 -#define CFG_RESET_ADDRESS 0xC0000000 +#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_LAST_STAGE_INIT @@ -80,48 +65,51 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DATE \ - | CFG_CMD_ECHO \ - | CFG_CMD_IMMAP \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) - /* & ~( CFG_CMD_NET)) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#endif /* !CONFIG_COMMANDS */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_LOAD_ADDR 0x00100000 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CFG_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 } /* * Low Level Configuration Settings @@ -132,42 +120,41 @@ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xF0000000 +#define CONFIG_SYS_IMMR 0xF0000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ #ifdef CONFIG_BZIP2 -#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ #else -#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ #endif /* CONFIG_BZIP2 */ -#define CFG_ALLOC_DPRAM 1 /* use allocation routines */ +#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ /* * Flash @@ -175,42 +162,39 @@ /*----------------------------------------------------------------------- * Flash organisation */ -#define CFG_FLASH_BASE 0xFE000000 -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ /* Environment is in flash */ -#define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_OVERWRITE /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#ifdef CFG_CMD_DATE +#ifdef CONFIG_CMD_DATE # define CONFIG_RTC_DS3231 -# define CFG_I2C_RTC_ADDR 0x68 +# define CONFIG_SYS_I2C_RTC_ADDR 0x68 #endif /*----------------------------------------------------------------------- * I2C configuration */ -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) /* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ - -#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ -#define CFG_I2C_SLAVE 0xFE - -#ifdef CONFIG_SOFT_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */ +#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE /* * Software (bit-bang) I2C driver configuration */ @@ -226,7 +210,6 @@ #define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ else immr->im_cpm.cp_pbdat &= ~PB_SCL #define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SOFT_I2C */ #endif /*----------------------------------------------------------------------- @@ -236,10 +219,10 @@ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze */ #if defined(CONFIG_WATCHDOG) -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- @@ -247,21 +230,21 @@ *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ -#define CFG_SIUMCR (SIUMCR_FRC) +#define CONFIG_SYS_SIUMCR (SIUMCR_FRC) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -270,8 +253,8 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF11 -/* #define CFG_SCCR SCCR_TBS */ -#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ +/* #define CONFIG_SYS_SCCR SCCR_TBS */ +#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ SCCR_DFALCD00) @@ -280,7 +263,7 @@ *----------------------------------------------------------------------- * Set to zero to prevent the processor from entering debug mode */ -#define CFG_DER 0 +#define CONFIG_SYS_DER 0 /* Because of the way the 860 starts up and assigns CS0 the entire @@ -296,51 +279,51 @@ */ /* BR0 and OR0 (FLASH) */ -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ /* used to re-map FLASH both when starting from SRAM or FLASH: * restrict access enough to keep SRAM working (if any) * but not too much to meddle with FLASH accesses */ -#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ +#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ /* * FLASH timing: */ -#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ +#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ OR_SCY_6_CLK | OR_EHTR | OR_BI) -#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) -#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) -#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) +#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) /* * SDRAM CS1 UPMB */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_BASE_PRELIM CFG_SDRAM_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE_PRELIM CONFIG_SYS_SDRAM_BASE #define SDRAM_MAX_SIZE 0x4000000 /* max 64 MB */ -#define CFG_PRELIM_OR1_AM 0xF0000000 -/* #define CFG_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */ +#define CONFIG_SYS_PRELIM_OR1_AM 0xF0000000 +/* #define CONFIG_SYS_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */ #define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */ -#define CFG_OR1_PRELIM (CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING) -#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V) +#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING) +#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V) -/* #define CFG_OR1_FINAL ((CFG_OR1_AM & OR_AM_MSK) | CFG_OR1_TIMING) */ -/* #define CFG_BR1_FINAL ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */ +/* #define CONFIG_SYS_OR1_FINAL ((CONFIG_SYS_OR1_AM & OR_AM_MSK) | CONFIG_SYS_OR1_TIMING) */ +/* #define CONFIG_SYS_BR1_FINAL ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */ -#define CFG_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64)) -#define CFG_PTA_PER_CLK 195 -#define CFG_MBMR_PTB 195 -#define CFG_MPTPR MPTPR_PTP_DIV16 -#define CFG_MAR 0x88 +#define CONFIG_SYS_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64)) +#define CONFIG_SYS_PTA_PER_CLK 195 +#define CONFIG_SYS_MBMR_PTB 195 +#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16 +#define CONFIG_SYS_MAR 0x88 -#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ +#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ MBMR_AMB_TYPE_0 | \ MBMR_G0CLB_A10 | \ MBMR_DSB_1_CYCL | \ @@ -348,7 +331,7 @@ MBMR_WLFB_1X | \ MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ -#define CFG_MBMR_9COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ +#define CONFIG_SYS_MBMR_9COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ MBMR_AMB_TYPE_1 | \ MBMR_G0CLB_A10 | \ MBMR_DSB_1_CYCL | \ @@ -360,27 +343,27 @@ /* * DSP Host Port Interface CS3 */ -#define CFG_SPC1920_HPI_BASE 0x90000000 -#define CFG_PRELIM_OR3_AM 0xF8000000 +#define CONFIG_SYS_SPC1920_HPI_BASE 0x90000000 +#define CONFIG_SYS_PRELIM_OR3_AM 0xF8000000 -#define CFG_OR3 (CFG_PRELIM_OR3_AM | \ +#define CONFIG_SYS_OR3 (CONFIG_SYS_PRELIM_OR3_AM | \ OR_G5LS | \ OR_SCY_0_CLK | \ OR_BI) -#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \ +#define CONFIG_SYS_BR3 ((CONFIG_SYS_SPC1920_HPI_BASE & BR_BA_MSK) | \ BR_MS_UPMA | \ BR_PS_16 | \ - BR_V); + BR_V) -#define CFG_MAMR (MAMR_GPL_A4DIS | \ +#define CONFIG_SYS_MAMR (MAMR_GPL_A4DIS | \ MAMR_RLFA_5X | \ MAMR_WLFA_5X) #define CONFIG_SPC1920_HPI_TEST #ifdef CONFIG_SPC1920_HPI_TEST -#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x))) +#define HPI_REG(x) (*((volatile u16 *) (CONFIG_SYS_SPC1920_HPI_BASE + x))) #define HPI_HPIC_1 HPI_REG(0) #define HPI_HPIC_2 HPI_REG(2) #define HPI_HPIA_1 HPI_REG(0x2000008) @@ -394,41 +377,29 @@ /* * Ramtron FM18L08 FRAM 32KB on CS4 */ -#define CFG_SPC1920_FRAM_BASE 0x80100000 -#define CFG_PRELIM_OR4_AM 0xffff8000 -#define CFG_OR4 (CFG_PRELIM_OR4_AM | \ +#define CONFIG_SYS_SPC1920_FRAM_BASE 0x80100000 +#define CONFIG_SYS_PRELIM_OR4_AM 0xffff8000 +#define CONFIG_SYS_OR4 (CONFIG_SYS_PRELIM_OR4_AM | \ OR_ACS_DIV2 | \ OR_BI | \ OR_SCY_4_CLK | \ OR_TRLX) -#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); +#define CONFIG_SYS_BR4 ((CONFIG_SYS_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) /* * PLD CS5 */ -#define CFG_SPC1920_PLD_BASE 0x80000000 -#define CFG_PRELIM_OR5_AM 0xffff8000 +#define CONFIG_SYS_SPC1920_PLD_BASE 0x80000000 +#define CONFIG_SYS_PRELIM_OR5_AM 0xffff8000 -#define CFG_OR5_PRELIM (CFG_PRELIM_OR5_AM | \ +#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR5_AM | \ OR_CSNT_SAM | \ OR_ACS_DIV1 | \ OR_BI | \ OR_SCY_0_CLK | \ OR_TRLX) -#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -/* Machine type -*/ -#define _MACH_8xx (_MACH_fads) +#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) #endif /* __CONFIG_H */