X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=4c75cc52f3af43e290a1bf4d4b84cf5c60044abf;hp=be0d2ec3c7c09ff86249f4b054ada87c02a8c216;hb=616cf60ee0886eaf7d60b9204f762391a1e9ae52;hpb=2c601c7208713ba9b2158c57adcf515f4bdbc212

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index be0d2ec3c7..4c75cc52f3 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -98,8 +98,6 @@
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_SYS_I2C_BUS		0
-#define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
 /* TWL4030 */
@@ -127,6 +125,8 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
+#define CONFIG_NAND_OMAP_BCH8
+#define CONFIG_BCH
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -195,7 +195,7 @@
 		"bootm ${loadaddr}\0" \
 	"loaduimage_ubi=mtd default; " \
 		"ubi part fs; " \
-		"ubifsmount root; " \
+		"ubifsmount ubi:root; " \
 		"ubifsload ${loadaddr} /boot/uImage\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
@@ -247,7 +247,6 @@
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE		(128 << 20)	/* at least 128 MiB */
 #define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
 /* NAND and environment organization  */
@@ -293,7 +292,7 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(55 * 1024)	/* 7 KB for stack */
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
@@ -306,11 +305,14 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
-						10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCPOS		{12, 13, 14, 15, 16, 17, 18, 19, 20,\
+			21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
+			34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
+			47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
+			60, 61, 62, 63}
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCBYTES	13
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE