X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fuc101.h;h=f13669181c1e0578a5ea9c9f46e90e8b63d94b72;hp=3b471d0a97fb3f7e92152d30cc83b18a94df9f62;hb=d0a51373131c4ba565a2391d5ed78b87c406ce98;hpb=d61ea14885631e58a25feaa81ee82eb464c62d6a diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 3b471d0a97..f13669181c 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2006 + * (C) Copyright 2003-2009 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this @@ -29,27 +29,21 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_UC101 1 /* UC101 board */ +#define CONFIG_UC101 1 /* UC101 board */ +#define CONFIG_HOSTNAME uc101 -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" -#define CONFIG_BOARD_EARLY_INIT_R +#include "manroland/common.h" +#include "manroland/mpc5200-common.h" /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* Partitions */ -#define CONFIG_DOS_PARTITION - /* * BOOTP options @@ -59,303 +53,67 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DTT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NFS -#define CONFIG_CMD_MII -#define CONFIG_CMD_SNTP - - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ - -#if (TEXT_BASE == 0xFFF00000) /* Boot low */ -# define CFG_LOWBOOT 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addwdt=setenv bootargs ${bootargs} wdt=off" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -#define CONFIG_MISC_INIT_R 1 - -/* - * IPB Bus clocking configuration. - */ -#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CFG_I2C_SPEED 100000 /* 100 kHz */ -#define CFG_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CFG_I2C_EEPROM_ADDR 0x58 -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_BITS 4 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 -/* for LM81 */ -#define CFG_EEPROM_PAGE_WRITE_ENABLE - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CFG_I2C_RTC_ADDR 0x51 - -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CFG_DTT_MAX_TEMP 70 -#define CFG_DTT_LOW_TEMP -30 -#define CFG_DTT_HYSTERESIS 3 - /* * Flash configuration */ -#define CFG_FLASH_BASE 0xFF800000 - -#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ -#define CFG_MAX_FLASH_SECT 140 /* max num of sects on one chip */ - -#define CFG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CFG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI -#define CFG_FLASH_EMPTY_INFO -#define CFG_FLASH_CFI_AMD_RESET +#define CONFIG_SYS_MAX_FLASH_SECT 140 /* * Environment settings */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_SECT_SIZE 0x10000 -#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CONFIG_ENV_SECT_SIZE 0x10000 /* * Memory map */ -#define CFG_MBAR 0xF0000000 -#define CFG_DEFAULT_MBAR 0x80000000 - -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SRAM_BASE 0x80100000 /* CS 1 */ -#define CFG_DISPLAY_BASE 0x80600000 /* CS 3 */ -#define CFG_IB_MASTER 0xc0510000 /* CS 6 */ -#define CFG_IB_EPLD 0xc0500000 /* CS 7 */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_DDR 1 -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 +#define CONFIG_SYS_IB_MASTER 0xc0510000 /* CS 6 */ +#define CONFIG_SYS_IB_EPLD 0xc0500000 /* CS 7 */ /* SRAM */ -#define SRAM_BASE CFG_SRAM_BASE /* SRAM base address */ -#define SRAM_LEN 0x1fffff -#define SRAM_END (SRAM_BASE + SRAM_LEN) - -/* Use ON-Chip SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE -#else -#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE -#endif - - -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 -#endif - -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 +#define CONFIG_SYS_SRAM_SIZE 0x200000 /* * GPIO configuration */ -#define CFG_GPS_PORT_CONFIG 0x4d558044 - -/*use Hardware WDT */ -#define CONFIG_HW_WATCHDOG - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -/* Enable an alternate, more extensive memory test */ -#define CFG_ALT_MEMTEST - -#define CFG_MEMTEST_START 0x00300000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 3 ... 15 MB in DRAM */ - -#define CFG_LOAD_ADDR 0x300000 /* default load address */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x4d558044 -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_MEMTEST_START 0x00300000 +#define CONFIG_SYS_MEMTEST_END 0x00f00000 -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Enable loopw command. - */ -#define CONFIG_LOOPW - -/* - * Various low-level settings - */ -#if defined(CONFIG_MPC5200) -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE -#else -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 -#endif +#define CONFIG_SYS_LOAD_ADDR 0x300000 -#define CFG_BOOTCS_START CFG_FLASH_BASE -#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x00045D00 -#define CFG_CS0_START CFG_FLASH_BASE -#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CONFIG_SYS_BOOTCS_CFG 0x00045D00 /* 8Mbit SRAM @0x80100000 */ -#define CFG_CS1_START CFG_SRAM_BASE -#define CFG_CS1_SIZE 0x00100000 -#define CFG_CS1_CFG 0x21D00 +#define CONFIG_SYS_CS1_SIZE 0x00200000 +#define CONFIG_SYS_CS1_CFG 0x21D00 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ -#define CFG_CS3_START CFG_DISPLAY_BASE -#define CFG_CS3_SIZE 0x00000100 -#define CFG_CS3_CFG 0x00081802 +#define CONFIG_SYS_CS3_START CONFIG_SYS_DISPLAY_BASE +#define CONFIG_SYS_CS3_SIZE 0x00000100 +#define CONFIG_SYS_CS3_CFG 0x00081802 /* Interbus Master 16 Bit */ -#define CFG_CS6_START CFG_IB_MASTER -#define CFG_CS6_SIZE 0x00010000 -#define CFG_CS6_CFG 0x00FF3500 +#define CONFIG_SYS_CS6_START CONFIG_SYS_IB_MASTER +#define CONFIG_SYS_CS6_SIZE 0x00010000 +#define CONFIG_SYS_CS6_CFG 0x00FF3500 /* Interbus EPLD 8 Bit */ -#define CFG_CS7_START CFG_IB_EPLD -#define CFG_CS7_SIZE 0x00010000 -#define CFG_CS7_CFG 0x00081800 - -#define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x33333333 +#define CONFIG_SYS_CS7_START CONFIG_SYS_IB_EPLD +#define CONFIG_SYS_CS7_SIZE 0x00010000 +#define CONFIG_SYS_CS7_CFG 0x00081800 /*----------------------------------------------------------------------- * IDE/ATA stuff Supports IDE harddisk *----------------------------------------------------------------------- */ -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_IDE_PREINIT 1 -/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ - -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus*/ /*---------------------------------------------------------------------*/ /* Display addresses */ /*---------------------------------------------------------------------*/ -#define CFG_DISP_CHR_RAM (CFG_DISPLAY_BASE + 0x38) -#define CFG_DISP_CWORD (CFG_DISPLAY_BASE + 0x30) +#define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38) +#define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30) #endif /* __CONFIG_H */