X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Flcd.h;h=2517d39d4144a5f3d760c9bcb53029b3460c4316;hp=44ac8ef8c7049c602907091b01d8e9620932ccf5;hb=395166cffbb427bfb0da051ac044118a592e5c0b;hpb=912810eeca90eedd1503f5e883f3a8da39d7ff89

diff --git a/include/lcd.h b/include/lcd.h
index 44ac8ef8c7..2517d39d41 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -43,6 +43,19 @@ extern void *lcd_console_address;	/* Start of console buffer	*/
 
 extern short console_col;
 extern short console_row;
+extern struct vidinfo panel_info;
+
+extern void lcd_ctrl_init (void *lcdbase);
+extern void lcd_enable (void);
+
+/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
+extern void lcd_setcolreg (ushort regno,
+				ushort red, ushort green, ushort blue);
+extern void lcd_initcolregs (void);
+
+/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
+extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
+extern int bmp_display(ulong addr, int x, int y);
 
 #if defined CONFIG_MPC823
 /*
@@ -75,9 +88,8 @@ typedef struct vidinfo {
 	u_char	vl_wbf;		/* Wait between frames */
 } vidinfo_t;
 
-extern vidinfo_t panel_info;
-
-#elif defined CONFIG_PXA250
+#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
+	defined CONFIG_CPU_MONAHANS
 /*
  * PXA LCD DMA descriptor
  */
@@ -146,27 +158,19 @@ typedef struct vidinfo {
 	struct	pxafb_info pxa;
 } vidinfo_t;
 
-extern vidinfo_t panel_info;
+#elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
 
-#elif defined(CONFIG_MCC200)
 typedef struct vidinfo {
-	ushort	vl_col;		/* Number of columns (i.e. 160) */
-	ushort	vl_row;		/* Number of rows (i.e. 100) */
-
-	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
-} vidinfo_t;
-
-#elif defined(CONFIG_ATMEL_LCD)
-
-typedef struct vidinfo {
-	u_long vl_col;		/* Number of columns (i.e. 640) */
-	u_long vl_row;		/* Number of rows (i.e. 480) */
+	ushort vl_col;		/* Number of columns (i.e. 640) */
+	ushort vl_row;		/* Number of rows (i.e. 480) */
 	u_long vl_clk;	/* pixel clock in ps    */
 
 	/* LCD configuration register */
 	u_long vl_sync;		/* Horizontal / vertical sync */
 	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
 	u_long vl_tft;		/* 0 = passive, 1 = TFT */
+	u_long vl_cont_pol_low;	/* contrast polarity is low */
+	u_long vl_clk_pol;	/* clock polarity */
 
 	/* Horizontal control register. */
 	u_long vl_hsync_len;	/* Length of horizontal sync */
@@ -181,9 +185,100 @@ typedef struct vidinfo {
 	u_long	mmio;		/* Memory mapped registers */
 } vidinfo_t;
 
-extern vidinfo_t panel_info;
+#elif defined(CONFIG_EXYNOS_FB)
 
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
+enum {
+	FIMD_RGB_INTERFACE = 1,
+	FIMD_CPU_INTERFACE = 2,
+};
+
+enum exynos_fb_rgb_mode_t {
+	MODE_RGB_P = 0,
+	MODE_BGR_P = 1,
+	MODE_RGB_S = 2,
+	MODE_BGR_S = 3,
+};
+
+typedef struct vidinfo {
+	ushort vl_col;		/* Number of columns (i.e. 640) */
+	ushort vl_row;		/* Number of rows (i.e. 480) */
+	ushort vl_width;	/* Width of display area in millimeters */
+	ushort vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char vl_freq;		/* Frequency */
+	u_char vl_clkp;		/* Clock polarity */
+	u_char vl_oep;		/* Output Enable polarity */
+	u_char vl_hsp;		/* Horizontal Sync polarity */
+	u_char vl_vsp;		/* Vertical Sync polarity */
+	u_char vl_dp;		/* Data polarity */
+	u_char vl_bpix;		/* Bits per pixel */
+
+	/* Horizontal control register. Timing from data sheet */
+	u_char vl_hspw;		/* Horz sync pulse width */
+	u_char vl_hfpd;		/* Wait before of line */
+	u_char vl_hbpd;		/* Wait end of line */
+
+	/* Vertical control register. */
+	u_char	vl_vspw;	/* Vertical sync pulse width */
+	u_char	vl_vfpd;	/* Wait before of frame */
+	u_char	vl_vbpd;	/* Wait end of frame */
+	u_char  vl_cmd_allow_len; /* Wait end of frame */
+
+	void (*cfg_gpio)(void);
+	void (*backlight_on)(unsigned int onoff);
+	void (*reset_lcd)(void);
+	void (*lcd_power_on)(void);
+	void (*cfg_ldo)(void);
+	void (*enable_ldo)(unsigned int onoff);
+	void (*mipi_power)(void);
+	void (*backlight_reset)(void);
+
+	unsigned int win_id;
+	unsigned int init_delay;
+	unsigned int power_on_delay;
+	unsigned int reset_delay;
+	unsigned int interface_mode;
+	unsigned int mipi_enabled;
+	unsigned int dp_enabled;
+	unsigned int cs_setup;
+	unsigned int wr_setup;
+	unsigned int wr_act;
+	unsigned int wr_hold;
+	unsigned int logo_on;
+	unsigned int logo_width;
+	unsigned int logo_height;
+	unsigned long logo_addr;
+	unsigned int rgb_mode;
+	unsigned int resolution;
+
+	/* parent clock name(MPLL, EPLL or VPLL) */
+	unsigned int pclk_name;
+	/* ratio value for source clock from parent clock. */
+	unsigned int sclk_div;
+
+	unsigned int dual_lcd_enabled;
+
+} vidinfo_t;
+
+void init_panel_info(vidinfo_t *vid);
+
+#else
+
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 160) */
+	ushort	vl_row;		/* Number of rows (i.e. 100) */
+
+	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
+
+	ushort	*cmap;		/* Pointer to the colormap */
+
+	void	*priv;		/* Pointer to driver-specific data */
+} vidinfo_t;
+
+#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
+
+extern vidinfo_t panel_info;
 
 /* Video functions */
 
@@ -196,7 +291,47 @@ void	lcd_disable	(void);
 void	lcd_putc	(const char c);
 void	lcd_puts	(const char *s);
 void	lcd_printf	(const char *fmt, ...);
+void	lcd_clear(void);
+int	lcd_display_bitmap(ulong bmp_image, int x, int y);
 
+/**
+ * Get the width of the LCD in pixels
+ *
+ * @return width of LCD in pixels
+ */
+int lcd_get_pixel_width(void);
+
+/**
+ * Get the height of the LCD in pixels
+ *
+ * @return height of LCD in pixels
+ */
+int lcd_get_pixel_height(void);
+
+/**
+ * Get the number of text lines/rows on the LCD
+ *
+ * @return number of rows
+ */
+int lcd_get_screen_rows(void);
+
+/**
+ * Get the number of text columns on the LCD
+ *
+ * @return number of columns
+ */
+int lcd_get_screen_columns(void);
+
+/**
+ * Set the position of the text cursor
+ *
+ * @param col	Column to place cursor (0 = left side)
+ * @param row	Row to place cursor (0 = top line)
+ */
+void lcd_position_cursor(unsigned col, unsigned row);
+
+/* Allow boards to customize the information displayed */
+void lcd_show_board_info(void);
 
 /************************************************************************/
 /* ** BITMAP DISPLAY SUPPORT						*/
@@ -211,8 +346,8 @@ void	lcd_printf	(const char *fmt, ...);
  *  the LCD controller and memory allocation. Someone has to know what
  *  is connected, as we can't autodetect anything.
  */
-#define CFG_HIGH	0	/* Pins are active high			*/
-#define CFG_LOW		1	/* Pins are active low			*/
+#define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
+#define CONFIG_SYS_LOW		1	/* Pins are active low			*/
 
 #define LCD_MONOCHROME	0
 #define LCD_COLOR2	1
@@ -307,7 +442,7 @@ void	lcd_printf	(const char *fmt, ...);
 #if LCD_BPP == LCD_MONOCHROME
 # define COLOR_MASK(c)		((c)	  | (c) << 1 | (c) << 2 | (c) << 3 | \
 				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif LCD_BPP == LCD_COLOR8
+#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
 # define COLOR_MASK(c)		(c)
 #else
 # error Unsupported LCD BPP.