X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fmmc.h;h=f46572e1772ee8781d347945abc2f78b9120a78a;hp=e1060b9ff2794f5b3ebb77b14321ccad1c499d54;hb=8e4ab1d58265884bbc9da6c6720d7a635f00fb2b;hpb=4641c211f6e37454c30770521c4de79c725036b0 diff --git a/include/mmc.h b/include/mmc.h index e1060b9ff2..f46572e177 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -12,6 +12,7 @@ #include #include +#include #define SD_VERSION_SD 0x20000 #define SD_VERSION_3 (SD_VERSION_SD | 0x300) @@ -31,15 +32,13 @@ #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) -#define MMC_MODE_HS 0x001 -#define MMC_MODE_HS_52MHz 0x010 -#define MMC_MODE_4BIT 0x100 -#define MMC_MODE_8BIT 0x200 -#define MMC_MODE_SPI 0x400 -#define MMC_MODE_HC 0x800 - -#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) -#define MMC_MODE_WIDTH_BITS_SHIFT 8 +#define MMC_MODE_HS (1 << 0) +#define MMC_MODE_HS_52MHz (1 << 1) +#define MMC_MODE_4BIT (1 << 2) +#define MMC_MODE_8BIT (1 << 3) +#define MMC_MODE_SPI (1 << 4) +#define MMC_MODE_HC (1 << 5) +#define MMC_MODE_DDR_52MHz (1 << 6) #define SD_DATA_4BIT 0x00040000 @@ -53,6 +52,7 @@ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 #define IN_PROGRESS -20 /* operation is in progress */ +#define SWITCH_ERR -21 /* Card reports failure to switch mode */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -69,6 +69,7 @@ #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_SINGLE_BLOCK 17 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_SET_BLOCK_COUNT 23 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 #define MMC_CMD_ERASE_GROUP_START 35 @@ -97,9 +98,6 @@ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 -#define MMC_HS_TIMING 0x00000100 -#define MMC_HS_52MHZ 0x2 - #define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 #define OCR_VOLTAGE_MASK 0x007FFF80 @@ -108,6 +106,7 @@ #define SECURE_ERASE 0x80000000 #define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_SWITCH_ERROR (1 << 7) #define MMC_STATUS_RDY_FOR_DATA (1 << 8) #define MMC_STATUS_CURR_STATE (0xf << 9) #define MMC_STATUS_ERROR (1 << 19) @@ -150,6 +149,7 @@ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ +#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ #define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_BOOT_BUS_WIDTH 177 @@ -173,10 +173,16 @@ #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) +#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) +#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ + | EXT_CSD_CARD_TYPE_DDR_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ +#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -187,6 +193,9 @@ #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) +#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) +#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) +#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -220,6 +229,7 @@ * boot partitions (2), general purpose partitions (4) in MMC v4.4. */ #define MMC_NUM_BOOT_PARTITION 2 +#define MMC_PART_RPMB 3 /* RPMB partition number */ struct mmc_cid { unsigned long psn; @@ -247,20 +257,40 @@ struct mmc_data { uint blocksize; }; +/* forward decl. */ +struct mmc; + +struct mmc_ops { + int (*send_cmd)(struct mmc *mmc, + struct mmc_cmd *cmd, struct mmc_data *data); + void (*set_ios)(struct mmc *mmc); + int (*init)(struct mmc *mmc); + int (*getcd)(struct mmc *mmc); + int (*getwp)(struct mmc *mmc); +}; + +struct mmc_config { + const char *name; + const struct mmc_ops *ops; + uint host_caps; + uint voltages; + uint f_min; + uint f_max; + uint b_max; + unsigned char part_type; +}; + +/* TODO struct mmc should be in mmc_private but it's hard to fix right now */ struct mmc { struct list_head link; - char name[32]; - void *priv; - uint voltages; + const struct mmc_config *cfg; /* provided configuration */ uint version; + void *priv; uint has_init; - uint f_min; - uint f_max; int high_capacity; uint bus_width; uint clock; uint card_caps; - uint host_caps; uint ocr; uint dsr; uint dsr_imp; @@ -280,13 +310,6 @@ struct mmc { u64 capacity_rpmb; u64 capacity_gp[4]; block_dev_desc_t block_dev; - int (*send_cmd)(struct mmc *mmc, - struct mmc_cmd *cmd, struct mmc_data *data); - void (*set_ios)(struct mmc *mmc); - int (*init)(struct mmc *mmc); - int (*getcd)(struct mmc *mmc); - int (*getwp)(struct mmc *mmc); - uint b_max; char op_cond_pending; /* 1 if we are waiting on an op_cond command */ char init_in_progress; /* 1 if we have done mmc_start_init() */ char preinit; /* start init as early as possible */ @@ -294,6 +317,8 @@ struct mmc { }; int mmc_register(struct mmc *mmc); +struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); +void mmc_destroy(struct mmc *mmc); int mmc_initialize(bd_t *bis); int mmc_init(struct mmc *mmc); int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); @@ -310,9 +335,19 @@ int mmc_set_dsr(struct mmc *mmc, u16 val); /* Function to change the size of boot partition and rpmb partitions */ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, unsigned long rpmbsize); -/* Function to send commands to open/close the specified boot partition */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); - +/* Function to modify the PARTITION_CONFIG field of EXT_CSD */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); +/* Function to modify the RST_n_FUNCTION field of EXT_CSD */ +int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); +/* Functions to read / write the RPMB partition */ +int mmc_rpmb_set_key(struct mmc *mmc, void *key); +int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter); +int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk, + unsigned short cnt, unsigned char *key); +int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, + unsigned short cnt, unsigned char *key); /** * Start device initialization and return immediately; it does not block on * polling OCR (operation condition register) status. Then you should call @@ -340,7 +375,7 @@ void mmc_set_preinit(struct mmc *mmc, int preinit); #ifdef CONFIG_GENERIC_MMC #ifdef CONFIG_MMC_SPI -#define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) +#define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) #else #define mmc_host_is_spi(mmc) 0 #endif @@ -349,4 +384,11 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); int mmc_legacy_init(int verbose); #endif +int board_mmc_init(bd_t *bis); + +/* Set block count limit because of 16 bit register limit on some hardware*/ +#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 +#endif + #endif /* _MMC_H_ */