This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
+Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+ FAVR-32-EZKIT AT32AP7000
+
#########################################################################
# SuperH Systems: #
# #
atstk1004 \
atstk1006 \
atngw100 \
+ favr-32-ezkit \
"
#########################################################################
atstk1006_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+favr-32-ezkit_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
+
#========================================================================
# SH3 (SuperH)
#========================================================================
--- /dev/null
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2008 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+# Place, Suite 330, Boston, MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS += --gc-sections
+TEXT_BASE = 0x00000000
+LDSCRIPT = $(obj)board/earthlcd/favr-32-ezkit/u-boot.lds
--- /dev/null
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+ /* MT48LC4M32B2P-6 (16 MB) */
+ .data_bits = SDRAM_DATA_32BIT,
+ .row_bits = 12,
+ .col_bits = 8,
+ .bank_bits = 2,
+ .cas = 3,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 5,
+ .txsr = 5,
+ /* 15.6 us */
+ .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+};
+
+int board_early_init_f(void)
+{
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+ gpio_enable_ebi();
+ gpio_enable_usart3();
+#if defined(CONFIG_MACB)
+ gpio_enable_macb0();
+#endif
+#if defined(CONFIG_MMC)
+ gpio_enable_mmci();
+#endif
+
+ return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
+}
+
+void board_init_info(void)
+{
+ gd->bd->bi_phy_id[0] = 0x01;
+}
+
+#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+int board_eth_init(bd_t *bi)
+{
+ return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_FAVR32_EZKIT_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void flash_identify(uint16_t *flash, flash_info_t *info)
+{
+ unsigned long flags;
+
+ flags = disable_interrupts();
+
+ dcache_flush_unlocked();
+
+ writew(0xaa, flash + 0x555);
+ writew(0x55, flash + 0xaaa);
+ writew(0x90, flash + 0x555);
+ info->flash_id = readl(flash);
+ writew(0xff, flash);
+
+ readw(flash);
+
+ if (flags)
+ enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+ unsigned long addr;
+ unsigned int i;
+
+ flash_info[0].size = CFG_FLASH_SIZE;
+ flash_info[0].sector_count = 135;
+
+ flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+ for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+ flash_info[0].start[i] = addr;
+ for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+ flash_info[0].start[i] = addr;
+
+ return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+ printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+ info->flash_id >> 16, info->flash_id & 0xffff);
+ printf("Size: %ld MB in %d sectors\n",
+ info->size >> 10, info->sector_count);
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ unsigned long flags;
+ unsigned long start_time;
+ uint16_t *fb, *sb;
+ unsigned int i;
+ int ret;
+ uint16_t status;
+
+ if ((s_first < 0) || (s_first > s_last)
+ || (s_last >= info->sector_count)) {
+ puts("Error: first and/or last sector out of range\n");
+ return ERR_INVAL;
+ }
+
+ for (i = s_first; i < s_last; i++)
+ if (info->protect[i]) {
+ printf("Error: sector %d is protected\n", i);
+ return ERR_PROTECTED;
+ }
+
+ fb = (uint16_t *)uncached(info->start[0]);
+
+ dcache_flush_unlocked();
+
+ for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+ printf("Erasing sector %3d...", i);
+
+ sb = (uint16_t *)uncached(info->start[i]);
+
+ flags = disable_interrupts();
+
+ start_time = get_timer(0);
+
+ /* Unlock sector */
+ writew(0xaa, fb + 0x555);
+ writew(0x70, sb);
+
+ /* Erase sector */
+ writew(0xaa, fb + 0x555);
+ writew(0x55, fb + 0xaaa);
+ writew(0x80, fb + 0x555);
+ writew(0xaa, fb + 0x555);
+ writew(0x55, fb + 0xaaa);
+ writew(0x30, sb);
+
+ /* Wait for completion */
+ ret = ERR_OK;
+ do {
+ /* TODO: Timeout */
+ status = readw(sb);
+ } while ((status != 0xffff) && !(status & 0x28));
+
+ writew(0xf0, fb);
+
+ /*
+ * Make sure the command actually makes it to the bus
+ * before we re-enable interrupts.
+ */
+ readw(fb);
+
+ if (flags)
+ enable_interrupts();
+
+ if (status != 0xffff) {
+ printf("Flash erase error at address 0x%p: 0x%02x\n",
+ sb, status);
+ ret = ERR_PROG_ERROR;
+ break;
+ }
+ }
+
+ if (ctrlc())
+ printf("User interrupt!\n");
+
+ return ERR_OK;
+}
+
+int write_buff(flash_info_t *info, uchar *src,
+ ulong addr, ulong count)
+{
+ unsigned long flags;
+ uint16_t *base, *p, *s, *end;
+ uint16_t word, status, status1;
+ int ret = ERR_OK;
+
+ if (addr < info->start[0]
+ || (addr + count) > (info->start[0] + info->size)
+ || (addr + count) < addr) {
+ puts("Error: invalid address range\n");
+ return ERR_INVAL;
+ }
+
+ if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+ puts("Error: misaligned source, destination or count\n");
+ return ERR_ALIGN;
+ }
+
+ base = (uint16_t *)uncached(info->start[0]);
+ end = (uint16_t *)uncached(addr + count);
+
+ flags = disable_interrupts();
+
+ dcache_flush_unlocked();
+ sync_write_buffer();
+
+ for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+ p < end && !ctrlc(); p++, s++) {
+ word = *s;
+
+ writew(0xaa, base + 0x555);
+ writew(0x55, base + 0xaaa);
+ writew(0xa0, base + 0x555);
+ writew(word, p);
+
+ sync_write_buffer();
+
+ /* Wait for completion */
+ status1 = readw(p);
+ do {
+ /* TODO: Timeout */
+ status = status1;
+ status1 = readw(p);
+ } while (((status ^ status1) & 0x40) /* toggled */
+ && !(status1 & 0x28)); /* error bits */
+
+ /*
+ * We'll need to check once again for toggle bit
+ * because the toggle bit may stop toggling as I/O5
+ * changes to "1" (ref at49bv642.pdf p9)
+ */
+ status1 = readw(p);
+ status = readw(p);
+ if ((status ^ status1) & 0x40) {
+ printf("Flash write error at address 0x%p: "
+ "0x%02x != 0x%02x\n",
+ p, status,word);
+ ret = ERR_PROG_ERROR;
+ writew(0xf0, base);
+ readw(base);
+ break;
+ }
+
+ writew(0xf0, base);
+ readw(base);
+ }
+
+ if (flags)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif /* CONFIG_FAVR32_EZKIT_EXT_FLASH */
--- /dev/null
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+ .text : {
+ *(.exception.text)
+ *(.text)
+ *(.text.*)
+ }
+ _etext = .;
+
+ .rodata : {
+ *(.rodata)
+ *(.rodata.*)
+ }
+
+ . = ALIGN(8);
+ _data = .;
+ .data : {
+ *(.data)
+ *(.data.*)
+ }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : {
+ KEEP(*(.u_boot_cmd))
+ }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ _got = .;
+ .got : {
+ *(.got)
+ }
+ _egot = .;
+
+ . = ALIGN(8);
+ _edata = .;
+
+ .bss (NOLOAD) : {
+ *(.bss)
+ *(.bss.*)
+ }
+ . = ALIGN(8);
+ _end = .;
+}
--- /dev/null
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * Configuration settings for the Favr-32 EarthLCD LCD kit.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_FAVR32_EZKIT 1
+
+#define CONFIG_FAVR32_EZKIT_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "root=/dev/mtdblock1 rootfstype=jffs fbmem=1800k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on Favr-32 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff