default "uniphier"
config SYS_CONFIG_NAME
- default "ph1_pro4" if MACH_PH1_PRO4
- default "ph1_ld4" if MACH_PH1_LD4
- default "ph1_sld8" if MACH_PH1_SLD8
+ default "uniphier"
+
+config UNIPHIER_SMP
+ bool
choice
prompt "UniPhier SoC select"
config MACH_PH1_PRO4
bool "PH1-Pro4"
+ select UNIPHIER_SMP
config MACH_PH1_LD4
bool "PH1-LD4"
endchoice
+choice
+ prompt "UniPhier Support Card select"
+ optional
+
+config PFC_MICRO_SUPPORT_CARD
+ bool "Support card with PFC CPLD"
+ help
+ This option provides support for the expansion board with PFC
+ original address mapping.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+config DCC_MICRO_SUPPORT_CARD
+ bool "Support card with DCC CPLD"
+ help
+ This option provides support for the expansion board with DCC-
+ arranged address mapping that is compatible with legacy UniPhier
+ reference boards.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+endchoice
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
depends on !SPL_BUILD
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
+obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/board.h>
+
+int board_early_init_r(void)
+{
+ uniphier_board_late_init();
+ return 0;
+}
#endif
}
-static void nand_denali_fixup(void)
-{
-#if defined(CONFIG_NAND_DENALI) && \
- (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4))
- /*
- * The Denali NAND controller on some of UniPhier SoCs does not
- * automatically query the device parameters. For those SoCs,
- * some registers must be set after the device is probed.
- */
- void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
- struct mtd_info *mtd;
- struct nand_chip *chip;
-
- if (nand_curr_device < 0 ||
- nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) {
- /* NAND was not detected. Just return. */
- return;
- }
-
- mtd = &nand_info[nand_curr_device];
- chip = mtd->priv;
-
- writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK);
- writel(0, denali_reg + DEVICE_WIDTH);
- writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE);
- writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE);
- writel(1, denali_reg + DEVICES_CONNECTED);
-
- /*
- * chip->scan_bbt in nand_scan_tail() has been skipped.
- * It should be done in here.
- */
- chip->scan_bbt(mtd);
-#endif
-}
-
int board_late_init(void)
{
puts("MODE: ");
case BOOT_DEVICE_MMC1:
printf("eMMC Boot\n");
setenv("bootmode", "emmcboot");
- nand_denali_fixup();
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot\n");
case BOOT_DEVICE_NOR:
printf("NOR Boot\n");
setenv("bootmode", "norboot");
- nand_denali_fixup();
break;
default:
printf("Unsupported Boot Mode\n");
#define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \
(IS_INIT_STACK_AREA(x)))
#define IS_EXT(x) ((x) < 0x100)
-#define IS_REG(x) (0x500 <= (x) && (x) < 0x700)
+
+/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */
+#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \
+ (0x500 <= (x) && (x) < 0x700) || \
+ (0xf00 <= (x))
+
#define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00)
#define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
- if (readl(SBBASE0) & 0x1) {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x3effffff: memory bank (31MB)
- * 0x03f00000-0x3fffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- } else {
+ if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
* 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x00000000-0x01ffffff: mask ROM
+ * 0x02000000-0x3effffff: memory bank (31MB)
+ * 0x03f00000-0x3fffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
#if !defined(CONFIG_SPL_BUILD)
}
#endif
+int check_support_card(void)
+{
+ printf("SC: Micro Support Card ");
+ return support_card_show_revision();
+}
+
void support_card_init(void)
{
/*
support_card_reset_deassert();
}
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
#if defined(CONFIG_SMC911X)
#include <netdev.h>
#if !defined(CONFIG_SYS_NO_FLASH)
#include <mtd/cfi_flash.h>
+#include <asm/arch/sbc-regs.h>
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
-static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] =
- CONFIG_SYS_FLASH_BANKS_LIST;
+struct memory_bank {
+ phys_addr_t base;
+ unsigned long size;
+};
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i];
-}
-#endif
-
-int mem_is_flash(phys_addr_t base)
+static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
int ret = 1;
int i;
- scratch_addr = map_physmem(base + 0x01e00000,
- sizeof(u32) * loop, MAP_NOCACHE);
+ /* just in case, use the tail of the memory bank */
+ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
+ sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
return ret;
}
-int board_flash_wp_on(void)
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+ /* {address, size} */
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x02000000, 0x01f00000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x01f00000},
+};
+#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x04000000, 0x04000000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x04000000},
+ {0x04000000, 0x04000000},
+};
+#endif
+
+static const struct memory_bank
+*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
+
+phys_addr_t cfi_flash_bank_addr(int i)
{
- int i;
- int ret = 1;
+ return flash_banks_list[i]->base;
+}
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- if (mem_is_flash(cfi_flash_bank_addr(i))) {
- /*
- * We found at least one flash.
- * We need to return 0 and call flash_init().
- */
- ret = 0;
- }
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
- else {
- /*
- * We might have a SRAM here.
- * To prevent SRAM data from being destroyed,
- * we set dummy address (SDRAM).
- */
- flash_banks_list[i] = 0x80000000 + 0x10000 * i;
+unsigned long cfi_flash_bank_size(int i)
+{
+ return flash_banks_list[i]->size;
+}
+
+static void detect_num_flash_banks(void)
+{
+ const struct memory_bank *memory_bank, *end;
+
+ cfi_flash_num_flash_banks = 0;
+
+ if (boot_is_swapped()) {
+ memory_bank = memory_banks_boot_swap_on;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
+ } else {
+ memory_bank = memory_banks_boot_swap_off;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
+ }
+
+ for (; memory_bank < end; memory_bank++) {
+ if (cfi_flash_num_flash_banks >=
+ CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
+ break;
+
+ if (mem_is_flash(memory_bank)) {
+ flash_banks_list[cfi_flash_num_flash_banks] =
+ memory_bank;
+
+ debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
+ memory_bank->base, memory_bank->size);
+ cfi_flash_num_flash_banks++;
}
-#endif
}
- return ret;
+ debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
+}
+#else /* ONFIG_SYS_NO_FLASH */
+void detect_num_flash_banks(void)
+{
+};
+#endif /* ONFIG_SYS_NO_FLASH */
+
+void support_card_late_init(void)
+{
+ detect_num_flash_banks();
}
-#endif
tegra124-jetson-tk1.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-sld8-ref.dtb
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
compatible = "panasonic,ph1-ld4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
clock-frequency = <36864000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
compatible = "panasonic,ph1-pro4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
clock-frequency = <73728000>;
};
+ i2c0: i2c@58780000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58780000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58781000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58782000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58783000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ /* i2c4 does not exist */
+
+ i2c5: i2c@58785000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58785000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
+ i2c6: i2c@58786000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58786000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
status = "disabled";
reg = <0x5a810100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+
+/ {
+ model = "Panasonic UniPhier PH1-sLD3 Reference Board";
+ compatible = "panasonic,ph1-sld3-ref", "panasonic,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "panasonic,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart0: serial@54006800 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart1: serial@54006900 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart2: serial@54006a00 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ usb0: usb@5a800100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ };
+
+ usb3: usb@5a830100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a830100 0x100>;
+ };
+
+ nand: nand@f8000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
+ };
+};
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
compatible = "panasonic,ph1-sld8";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
clock-frequency = <80000000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
void support_card_reset(void);
void support_card_init(void);
+void support_card_late_init(void);
int check_support_card(void);
#else
#define support_card_reset() do {} while (0)
#define support_card_init() do {} while (0)
+#define support_card_late_init() do {} while (0)
static inline int check_support_card(void)
{
return 0;
support_card_init();
}
+static inline void uniphier_board_late_init(void)
+{
+ support_card_late_init();
+}
+
#endif /* ARCH_BOARD_H */
{
ulong flash_size = 0;
bd_t *bd = gd->bd;
- int ok;
puts("Flash: ");
- if (board_flash_wp_on()) {
+ if (board_flash_wp_on())
printf("Uninitialized - Write Protect On\n");
- /* Since WP is on, we can't find real size. Set to 0 */
- ok = 1;
- } else {
+ else
flash_size = flash_init();
- ok = flash_size > 0;
- }
- if (!ok) {
- puts("*** failed ***\n");
-#ifdef CONFIG_PPC
- /* Why does PPC do this? */
- hang();
-#endif
- return -1;
- }
+
print_size(flash_size, "");
#ifdef CONFIG_SYS_FLASH_CHECKSUM
/*
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_LD4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_PRO4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_SLD8=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
+++ /dev/null
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
+++ /dev/null
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 2
-
-#define CONFIG_UNIPHIER_SMP
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xa0000000
-#define CONFIG_SDRAM1_SIZE 0x20000000
-
-#define CONFIG_SPL_TEXT_BASE 0x100000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
+++ /dev/null
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/* #define CONFIG_DDR_STANDARD */
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \
- defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \
-are defined. Select only one of them."
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_DDR_NUM_CH0 2
+#define CONFIG_DDR_NUM_CH1 2
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x20000000
+#define CONFIG_SDRAM1_BASE 0xa0000000
+#define CONFIG_SDRAM1_SIZE 0x20000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_LD4)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
/*
#define CONFIG_SYS_NS16550_REG_SIZE -2
#endif
+/* TODO: move to Kconfig and device tree */
+#if 0
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SMC911X
+
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000}
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000}
-#endif
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
/* serial console configuration */
#define CONFIG_BAUDRATE 115200
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
"verify=n\0" \
- "autostart=yes\0" \
"norboot=run add_default_bootargs;" \
"bootm $image_offset\0" \
"nandboot=run add_default_bootargs;" \
#define CONFIG_SYS_TEXT_BASE 0x84000000
+#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_SPL_TEXT_BASE 0x00040000
+#endif
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_SPL_TEXT_BASE 0x00100000
+#endif
+
#define CONFIG_BOARD_POSTCLK_INIT
#ifndef CONFIG_SPL_BUILD
projects / karo-tx-uboot.git / commitdiff