Changes for U-Boot 1.0.0:
======================================================================
+* Patches by Thomas Lange, 09 Oct 2003:
+ - fix cmd_ide.c for non ppc boards (read/write functions did not
+ add ATA base address)
+ - fix for shannon board
+ - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+
+* Patch by Sangmoon Kim, 07 Oct 2003:
+ add support for debris board
+
* Patch by Martin Krause, 09 Oct 2003:
Fixes for TRAB board
- /board/trab/rs485.c: correct baudrate
Changes for U-Boot 0.4.8:
======================================================================
-<<<<<<< CHANGELOG
-<<<<<<< CHANGELOG
-<<<<<<< CHANGELOG
* Add I2C and RTC support for RMU board
-=======
-=======
-=======
* Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB
* Avoid flicker on TRAB's VFD
->>>>>>> 1.130
* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Add GCC library to examples/Makefile so GCC utility functions will
be resolved, too
->>>>>>> 1.118
* Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command
Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
CONFIG_BOOTP_MAKS (see README).
->>>>>>> 1.112
* Fix ICU862 environment problem
* Fix RAM size detection for RMU board
E: Brad.Kemp@seranoa.com
D: Port to Windriver ppmc8260 board
+N: Sangmoon Kim
+E: dogoil@etinsys.com
+D: Support for debris board
+
N: Thomas Koeller
E: tkoeller@gmx.net
D: Port to Motorola Sandpoint 3 (MPC8240)
ppmc8260 MPC8260
+Sangmoon Kim <dogoil@etinsys.com>
+
+ debris MPC8245
+
Nye Liu <nyet@zumanetworks.com>
ZUMA MPC7xx_74xx
LIST_824x=" \
A3000 BMW CPC45 CU824 \
- MOUSSE MUSENKI OXC PN62 \
- Sandpoint8240 Sandpoint8245 SL8245 utx8245 \
+ debris MOUSSE MUSENKI OXC \
+ PN62 Sandpoint8240 Sandpoint8245 SL8245 \
+ utx8245 \
"
#########################################################################
AmigaOneG3SE_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+BAB7xx_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+
+debris_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x debris etin
+
+ELPPC_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+
EVB64260_config \
EVB64260_750CX_config: unconfig
@./mkconfig EVB64260 ppc 74xx_7xx evb64260
-ZUMA_config: unconfig
+P3G4_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
-BAB7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
-ELPPC_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
-
-P3G4_config: unconfig
+ZUMA_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o phantom.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000, 2001
+# Sangmoon, Etin Systems, dogoil@etinsys.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Debris boards
+#
+
+#TEXT_BASE = 0x00090000
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+
+int checkboard (void)
+{
+ /*TODO: Check processor type */
+
+ puts ( "Board: Debris "
+#ifdef CONFIG_MPC8240
+ "8240"
+#endif
+#ifdef CONFIG_MPC8245
+ "8245"
+#endif
+ " ##Test not implemented yet##\n");
+ return 0;
+}
+
+#if 0 /* NOT USED */
+int checkflash (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("## Test not implemented yet ##\n");
+
+ return (0);
+}
+#endif
+
+long int initdram (int board_type)
+{
+ int i, cnt;
+ volatile uchar * base= CFG_SDRAM_BASE;
+ volatile ulong * addr;
+ ulong save[32];
+ ulong val, ret = 0;
+
+ for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+ addr = (volatile ulong *)base + cnt;
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ addr = (volatile ulong *)base;
+ save[i] = *addr;
+ *addr = 0;
+
+ if (*addr != 0) {
+ *addr = save[i];
+ goto Done;
+ }
+
+ for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+ addr = (volatile ulong *)base + cnt;
+ val = *addr;
+ *addr = save[--i];
+ if (val != ~cnt) {
+/* ulong new_bank0_end = cnt * sizeof(long) - 1;
+ ulong mear1 = mpc824x_mpc107_getreg(MEAR1);
+ ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+ mear1 = (mear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+ emear1 = (emear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+ mpc824x_mpc107_setreg(MEAR1, mear1);
+ mpc824x_mpc107_setreg(EMEAR1, emear1);*/
+
+ ret = cnt * sizeof(long);
+ goto Done;
+ }
+ }
+
+ ret = CFG_MAX_RAM_SIZE;
+Done:
+ return ret;
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_debris_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+ PCI_ENET1_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { }
+};
+#endif
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table: pci_debris_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+ pci_mpc824x_init(&hose);
+}
+
+void *nvram_read(void *dest, const long src, size_t count)
+{
+ volatile uchar *d = (volatile uchar*) dest;
+ volatile uchar *s = (volatile uchar*) src;
+ while(count--) {
+ *d++ = *s++;
+ asm volatile("sync");
+ }
+ return dest;
+}
+
+void nvram_write(long dest, const void *src, size_t count)
+{
+ volatile uchar *d = (volatile uchar*)dest;
+ volatile uchar *s = (volatile uchar*)src;
+ while(count--) {
+ *d++ = *s++;
+ asm volatile("sync");
+ }
+}
+
+int misc_init_r(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Write ethernet addr in NVRAM for VxWorks */
+ nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS,
+ (char*)&gd->bd->bi_enetaddr[0], 6);
+ return 0;
+}
--- /dev/null
+/*
+ * board/eva/flash.c
+ *
+ * (C) Copyright 2002
+ * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/pci_io.h>
+#include <mpc824x.h>
+
+int (*do_flash_erase)(flash_info_t*, uint32_t, uint32_t);
+int (*write_dword)(flash_info_t*, ulong, uint64_t);
+
+typedef uint64_t cfi_word;
+
+#define cfi_read(flash, addr) *((volatile cfi_word*)(flash->start[0] + addr))
+
+#define cfi_write(flash, val, addr) \
+ move64((cfi_word*)&val, \
+ (cfi_word*)(flash->start[0] + addr))
+
+#define CMD(x) ((((cfi_word)x)<<48)|(((cfi_word)x)<<32)|(((cfi_word)x)<<16)|(((cfi_word)x)))
+
+static void write32(unsigned long addr, uint32_t value)
+{
+ *(volatile uint32_t*)(addr) = value;
+ asm volatile("sync");
+}
+
+static uint32_t read32(unsigned long addr)
+{
+ uint32_t value;
+ value = *(volatile uint32_t*)addr;
+ asm volatile("sync");
+ return value;
+}
+
+static cfi_word cfi_cmd(flash_info_t *flash, uint8_t cmd, uint32_t addr)
+{
+ uint32_t base = flash->start[0];
+ uint32_t val=(cmd << 16) | cmd;
+ addr <<= 3;
+ write32(base + addr, val);
+ return addr;
+}
+
+static uint16_t cfi_read_query(flash_info_t *flash, uint32_t addr)
+{
+ uint32_t base = flash->start[0];
+ addr <<= 3;
+ return (uint16_t)read32(base + addr);
+}
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static void move64(uint64_t *src, uint64_t *dest)
+{
+ asm volatile("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0" ); /* Clobbers fr0 */
+ return;
+}
+
+static int cfi_write_dword(flash_info_t *flash, ulong dest, cfi_word data)
+{
+ unsigned long start;
+ cfi_word status = 0;
+
+ status = cfi_read(flash, dest);
+ data &= status;
+
+ cfi_cmd(flash, 0x40, 0);
+ cfi_write(flash, data, dest);
+
+ udelay(10);
+ start = get_timer (0);
+ for(;;) {
+ status = cfi_read(flash, dest);
+ status &= CMD(0x80);
+ if(status == CMD(0x80))
+ break;
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ cfi_cmd(flash, 0xff, 0);
+ return 1;
+ }
+ udelay(1);
+ }
+ cfi_cmd(flash, 0xff, 0);
+
+ return 0;
+}
+
+static int jedec_write_dword (flash_info_t *flash, ulong dest, cfi_word data)
+{
+ ulong start;
+ cfi_word status = 0;
+
+ status = cfi_read(flash, dest);
+ if(status != CMD(0xffff)) return 2;
+
+ cfi_cmd(flash, 0xaa, 0x555);
+ cfi_cmd(flash, 0x55, 0x2aa);
+ cfi_cmd(flash, 0xa0, 0x555);
+
+ cfi_write(flash, data, dest);
+
+ udelay(10);
+ start = get_timer (0);
+ status = ~data;
+ while(status != data) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ return 1;
+ status = cfi_read(flash, dest);
+ udelay(1);
+ }
+ return 0;
+}
+
+static __inline__ unsigned long get_msr(void)
+{
+ unsigned long msr;
+ __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+ return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+ __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
+
+int write_buff (flash_info_t *flash, uchar *src, ulong addr, ulong cnt)
+{
+ ulong wp;
+ int i, s, l, rc;
+ cfi_word data;
+ uint8_t *t = (uint8_t*)&data;
+ unsigned long base = flash->start[0];
+ uint32_t msr;
+
+ if (flash->flash_id == FLASH_UNKNOWN)
+ return 4;
+
+ if (cnt == 0)
+ return 0;
+
+ addr -= base;
+
+ msr = get_msr();
+ set_msr(msr|MSR_FP);
+
+ wp = (addr & ~7); /* get lower word aligned address */
+
+ if((addr-wp) != 0) {
+ data = cfi_read(flash, wp);
+ s = addr & 7;
+ l = ( cnt < (8-s) ) ? cnt : (8-s);
+ for(i = 0; i < l; i++)
+ t[s+i] = *src++;
+ if ((rc = write_dword(flash, wp, data)) != 0)
+ goto DONE;
+ wp += 8;
+ cnt -= l;
+ }
+
+ while (cnt >= 8) {
+ for (i = 0; i < 8; i++)
+ t[i] = *src++;
+ if ((rc = write_dword(flash, wp, data)) != 0)
+ goto DONE;
+ wp += 8;
+ cnt -= 8;
+ }
+
+ if (cnt == 0) {
+ rc = 0;
+ goto DONE;
+ }
+
+ data = cfi_read(flash, wp);
+ for(i = 0; i < cnt; i++)
+ t[i] = *src++;
+ rc = write_dword(flash, wp, data);
+DONE:
+ set_msr(msr);
+ return rc;
+}
+
+static int cfi_erase_oneblock(flash_info_t *flash, uint32_t sect)
+{
+ int sa;
+ int flag;
+ ulong start, last, now;
+ cfi_word status;
+
+ flag = disable_interrupts();
+
+ sa = (flash->start[sect] - flash->start[0]);
+ write32(flash->start[sect], 0x00200020);
+ write32(flash->start[sect], 0x00d000d0);
+
+ if (flag)
+ enable_interrupts();
+
+ udelay(1000);
+ start = get_timer (0);
+ last = start;
+
+ for (;;) {
+ status = cfi_read(flash, sa);
+ status &= CMD(0x80);
+ if (status == CMD(0x80))
+ break;
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ cfi_cmd(flash, 0xff, 0);
+ printf ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ if ((now - last) > 1000) {
+ serial_putc ('.');
+ last = now;
+ }
+ udelay(10);
+ }
+ cfi_cmd(flash, 0xff, 0);
+ return ERR_OK;
+}
+
+static int cfi_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
+{
+ int sect;
+ int rc = ERR_OK;
+
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (flash->protect[sect] == 0) {
+ rc = cfi_erase_oneblock(flash, sect);
+ if (rc != ERR_OK) break;
+ }
+ }
+ printf (" done\n");
+ return rc;
+}
+
+static int jedec_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
+{
+ int sect;
+ cfi_word status;
+ int sa = -1;
+ int flag;
+ ulong start, last, now;
+
+ flag = disable_interrupts();
+
+ cfi_cmd(flash, 0xaa, 0x555);
+ cfi_cmd(flash, 0x55, 0x2aa);
+ cfi_cmd(flash, 0x80, 0x555);
+ cfi_cmd(flash, 0xaa, 0x555);
+ cfi_cmd(flash, 0x55, 0x2aa);
+ for ( sect = s_first; sect <= s_last; sect++) {
+ if (flash->protect[sect] == 0) {
+ sa = flash->start[sect] - flash->start[0];
+ write32(flash->start[sect], 0x00300030);
+ }
+ }
+ if (flag)
+ enable_interrupts();
+
+ if (sa < 0)
+ goto DONE;
+
+ udelay (1000);
+ start = get_timer (0);
+ last = start;
+ for(;;) {
+ status = cfi_read(flash, sa);
+ if (status == CMD(0xffff))
+ break;
+
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ if ((now - last) > 1000) {
+ serial_putc ('.');
+ last = now;
+ }
+ udelay(10);
+ }
+DONE:
+ cfi_cmd(flash, 0xf0, 0);
+
+ printf (" done\n");
+
+ return ERR_OK;
+}
+
+int flash_erase (flash_info_t *flash, int s_first, int s_last)
+{
+ int sect;
+ int prot;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (flash->flash_id == FLASH_UNKNOWN)
+ printf ("- missing\n");
+ else
+ printf ("- no sectors to erase\n");
+ return ERR_NOT_ERASED;
+ }
+ if (flash->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return ERR_NOT_ERASED;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++)
+ if (flash->protect[sect]) prot++;
+
+ if (prot)
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ else
+ printf ("\n");
+
+ return do_flash_erase(flash, s_first, s_last);
+}
+
+struct jedec_flash_info {
+ const uint16_t mfr_id;
+ const uint16_t dev_id;
+ const char *name;
+ const int DevSize;
+ const int InterfaceDesc;
+ const int NumEraseRegions;
+ const ulong regions[4];
+};
+
+#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
+
+#define SIZE_1MiB 20
+#define SIZE_2MiB 21
+#define SIZE_4MiB 22
+
+static const struct jedec_flash_info jedec_table[] = {
+ {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV800T,
+ name: "AMD AM29LV800T",
+ DevSize: SIZE_1MiB,
+ NumEraseRegions: 4,
+ regions: {ERASEINFO(0x10000,15),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x04000,1)
+ }
+ }, {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV800B,
+ name: "AMD AM29LV800B",
+ DevSize: SIZE_1MiB,
+ NumEraseRegions: 4,
+ regions: {ERASEINFO(0x10000,15),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x04000,1)
+ }
+ }, {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV160T,
+ name: "AMD AM29LV160T",
+ DevSize: SIZE_2MiB,
+ NumEraseRegions: 4,
+ regions: {ERASEINFO(0x10000,31),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x04000,1)
+ }
+ }, {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV160B,
+ name: "AMD AM29LV160B",
+ DevSize: SIZE_2MiB,
+ NumEraseRegions: 4,
+ regions: {ERASEINFO(0x04000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x10000,31)
+ }
+ }, {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV320T,
+ name: "AMD AM29LV320T",
+ DevSize: SIZE_4MiB,
+ NumEraseRegions: 2,
+ regions: {ERASEINFO(0x10000,63),
+ ERASEINFO(0x02000,8)
+ }
+
+ }, {
+ mfr_id: (uint16_t)AMD_MANUFACT,
+ dev_id: (uint16_t)AMD_ID_LV320B,
+ name: "AMD AM29LV320B",
+ DevSize: SIZE_4MiB,
+ NumEraseRegions: 2,
+ regions: {ERASEINFO(0x02000,8),
+ ERASEINFO(0x10000,63)
+ }
+ }
+};
+
+static ulong cfi_init(uint32_t base, flash_info_t *flash)
+{
+ int sector;
+ int block;
+ int block_count;
+ int offset = 0;
+ int reverse = 0;
+ int primary;
+ int mfr_id;
+ int dev_id;
+
+ flash->start[0] = base;
+ cfi_cmd(flash, 0xF0, 0);
+ cfi_cmd(flash, 0x98, 0);
+ if ( !( cfi_read_query(flash, 0x10) == 'Q' &&
+ cfi_read_query(flash, 0x11) == 'R' &&
+ cfi_read_query(flash, 0x12) == 'Y' )) {
+ cfi_cmd(flash, 0xff, 0);
+ return 0;
+ }
+
+ flash->size = 1 << cfi_read_query(flash, 0x27);
+ flash->size *= 4;
+ block_count = cfi_read_query(flash, 0x2c);
+ primary = cfi_read_query(flash, 0x15);
+ if ( cfi_read_query(flash, primary + 4) == 0x30)
+ reverse = (cfi_read_query(flash, 0x1) & 0x01);
+ else
+ reverse = (cfi_read_query(flash, primary+15) == 3);
+
+ flash->sector_count = 0;
+
+ for ( block = reverse ? block_count - 1 : 0;
+ reverse ? block >= 0 : block < block_count;
+ reverse ? block-- : block ++) {
+ int sector_size =
+ (cfi_read_query(flash, 0x2d + block*4+2) |
+ (cfi_read_query(flash, 0x2d + block*4+3) << 8)) << 8;
+ int sector_count =
+ (cfi_read_query(flash, 0x2d + block*4+0) |
+ (cfi_read_query(flash, 0x2d + block*4+1) << 8)) + 1;
+ for(sector = 0; sector < sector_count; sector++) {
+ flash->start[flash->sector_count++] = base + offset;
+ offset += sector_size * 4;
+ }
+ }
+ mfr_id = cfi_read_query(flash, 0x00);
+ dev_id = cfi_read_query(flash, 0x01);
+
+ cfi_cmd(flash, 0xff, 0);
+
+ flash->flash_id = (mfr_id << 16) | dev_id;
+
+ for (sector = 0; sector < flash->sector_count; sector++) {
+ write32(flash->start[sector], 0x00600060);
+ write32(flash->start[sector], 0x00d000d0);
+ }
+ cfi_cmd(flash, 0xff, 0);
+
+ for (sector = 0; sector < flash->sector_count; sector++)
+ flash->protect[sector] = 0;
+
+ do_flash_erase = cfi_erase;
+ write_dword = cfi_write_dword;
+
+ return flash->size;
+}
+
+static ulong jedec_init(unsigned long base, flash_info_t *flash)
+{
+ int i;
+ int block, block_count;
+ int sector, offset;
+ int mfr_id, dev_id;
+ flash->start[0] = base;
+ cfi_cmd(flash, 0xF0, 0x000);
+ cfi_cmd(flash, 0xAA, 0x555);
+ cfi_cmd(flash, 0x55, 0x2AA);
+ cfi_cmd(flash, 0x90, 0x555);
+ mfr_id = cfi_read_query(flash, 0x000);
+ dev_id = cfi_read_query(flash, 0x0001);
+ cfi_cmd(flash, 0xf0, 0x000);
+
+ for(i=0; i<sizeof(jedec_table)/sizeof(struct jedec_flash_info); i++) {
+ if((jedec_table[i].mfr_id == mfr_id) &&
+ (jedec_table[i].dev_id == dev_id)) {
+
+ flash->flash_id = (mfr_id << 16) | dev_id;
+ flash->size = 1 << jedec_table[0].DevSize;
+ flash->size *= 4;
+ block_count = jedec_table[i].NumEraseRegions;
+ offset = 0;
+ flash->sector_count = 0;
+ for (block = 0; block < block_count; block++) {
+ int sector_size = jedec_table[i].regions[block];
+ int sector_count = (sector_size & 0xff) + 1;
+ sector_size >>= 8;
+ for (sector=0; sector<sector_count; sector++) {
+ flash->start[flash->sector_count++] =
+ base + offset;
+ offset += sector_size * 4;
+ }
+ }
+ break;
+ }
+ }
+
+ for (sector = 0; sector < flash->sector_count; sector++)
+ flash->protect[sector] = 0;
+
+ do_flash_erase = jedec_erase;
+ write_dword = jedec_write_dword;
+
+ return flash->size;
+}
+
+inline void mtibat1u(unsigned int x)
+{
+ __asm__ __volatile__ ("mtspr 530, %0" :: "r" (x));
+}
+
+inline void mtibat1l(unsigned int x)
+{
+ __asm__ __volatile__ ("mtspr 531, %0" :: "r" (x));
+}
+
+inline void mtdbat1u(unsigned int x)
+{
+ __asm__ __volatile__ ("mtspr 538, %0" :: "r" (x));
+}
+
+inline void mtdbat1l(unsigned int x)
+{
+ __asm__ __volatile__ ("mtspr 539, %0" :: "r" (x));
+}
+
+unsigned long flash_init (void)
+{
+ unsigned long size = 0;
+ int i;
+ unsigned int msr;
+
+ /* BAT1 */
+ CONFIG_WRITE_WORD(ERCR3, 0x0C00000C);
+ CONFIG_WRITE_WORD(ERCR4, 0x0800000C);
+ msr = get_msr();
+ set_msr(msr & ~(MSR_IR | MSR_DR));
+ mtibat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+ mtibat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+ mtdbat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+ mtdbat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+ set_msr(msr);
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ size = cfi_init(FLASH_BASE0_PRELIM, &flash_info[0]);
+ if (!size)
+ size = jedec_init(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN)
+ printf ("# Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+
+ return size;
+}
+
+void flash_print_info (flash_info_t *flash)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *p;
+
+ if (flash->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ flash_init();
+ }
+
+ if (flash->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (((flash->flash_id) >> 16) & 0xff) {
+ case 0x01:
+ printf ("AMD ");
+ break;
+ case 0x04:
+ printf("FUJITSU ");
+ break;
+ case 0x20:
+ printf("STM ");
+ break;
+ case 0xBF:
+ printf("SST ");
+ break;
+ case 0x89:
+ case 0xB0:
+ printf("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch ((flash->flash_id) & 0xffff) {
+ case (uint16_t)AMD_ID_LV800T:
+ printf ("AM29LV800T\n");
+ break;
+ case (uint16_t)AMD_ID_LV800B:
+ printf ("AM29LV800B\n");
+ break;
+ case (uint16_t)AMD_ID_LV160T:
+ printf ("AM29LV160T\n");
+ break;
+ case (uint16_t)AMD_ID_LV160B:
+ printf ("AM29LV160B\n");
+ break;
+ case (uint16_t)AMD_ID_LV320T:
+ printf ("AM29LV320T\n");
+ break;
+ case (uint16_t)AMD_ID_LV320B:
+ printf ("AM29LV320B\n");
+ break;
+ case (uint16_t)INTEL_ID_28F800C3T:
+ printf ("28F800C3T\n");
+ break;
+ case (uint16_t)INTEL_ID_28F800C3B:
+ printf ("28F800C3B\n");
+ break;
+ case (uint16_t)INTEL_ID_28F160C3T:
+ printf ("28F160C3T\n");
+ break;
+ case (uint16_t)INTEL_ID_28F160C3B:
+ printf ("28F160C3B\n");
+ break;
+ case (uint16_t)INTEL_ID_28F320C3T:
+ printf ("28F320C3T\n");
+ break;
+ case (uint16_t)INTEL_ID_28F320C3B:
+ printf ("28F320C3B\n");
+ break;
+ case (uint16_t)INTEL_ID_28F640C3T:
+ printf ("28F640C3T\n");
+ break;
+ case (uint16_t)INTEL_ID_28F640C3B:
+ printf ("28F640C3B\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ if (flash->size >= (1 << 20)) {
+ printf (" Size: %ld MB in %d Sectors\n",
+ flash->size >> 20, flash->sector_count);
+ } else {
+ printf (" Size: %ld kB in %d Sectors\n",
+ flash->size >> 10, flash->sector_count);
+ }
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < flash->sector_count; ++i) {
+ /* Check if whole sector is erased*/
+ if (i != (flash->sector_count-1))
+ size = flash->start[i+1] - flash->start[i];
+ else
+ size = flash->start[0] + flash->size - flash->start[i];
+
+ erased = 1;
+ p = (volatile unsigned long *)flash->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++) {
+ if (*p++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+
+ printf (" %08lX%s%s",
+ flash->start[i],
+ erased ? " E" : " ",
+ flash->protect[i] ? "RO " : " ");
+ }
+ printf ("\n");
+}
--- /dev/null
+/*
+ * board/eva/phantom.c
+ *
+ * Phantom RTC device driver for EVA
+ *
+ * Author: Sangmoon Kim
+ * dogoil@etinsys.com
+ *
+ * Copyright 2002 Etinsys Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+#define RTC_BASE (CFG_NVRAM_BASE_ADDR + 0x7fff8)
+
+#define RTC_YEAR ( RTC_BASE + 7 )
+#define RTC_MONTH ( RTC_BASE + 6 )
+#define RTC_DAY_OF_MONTH ( RTC_BASE + 5 )
+#define RTC_DAY_OF_WEEK ( RTC_BASE + 4 )
+#define RTC_HOURS ( RTC_BASE + 3 )
+#define RTC_MINUTES ( RTC_BASE + 2 )
+#define RTC_SECONDS ( RTC_BASE + 1 )
+#define RTC_CENTURY ( RTC_BASE + 0 )
+
+#define RTC_CONTROLA RTC_CENTURY
+#define RTC_CONTROLB RTC_SECONDS
+#define RTC_CONTROLC RTC_DAY_OF_WEEK
+
+#define RTC_CA_WRITE 0x80
+#define RTC_CA_READ 0x40
+
+#define RTC_CB_OSC_DISABLE 0x80
+
+#define RTC_CC_BATTERY_FLAG 0x80
+#define RTC_CC_FREQ_TEST 0x40
+
+
+static int phantom_flag = -1;
+static int century_flag = -1;
+
+static uchar rtc_read(unsigned int addr)
+{
+ return *(volatile unsigned char *)(addr);
+}
+
+static void rtc_write(unsigned int addr, uchar val)
+{
+ *(volatile unsigned char *)(addr) = val;
+}
+
+static unsigned char phantom_rtc_sequence[] = {
+ 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
+};
+
+static unsigned char* phantom_rtc_read(int addr, unsigned char rtc[8])
+{
+ int i, j;
+ unsigned char v;
+ unsigned char save = rtc_read(addr);
+
+ for (j = 0; j < 8; j++) {
+ v = phantom_rtc_sequence[j];
+ for (i = 0; i < 8; i++) {
+ rtc_write(addr, v & 1);
+ v >>= 1;
+ }
+ }
+ for (j = 0; j < 8; j++) {
+ v = 0;
+ for (i = 0; i < 8; i++) {
+ if(rtc_read(addr) & 1)
+ v |= 1 << i;
+ }
+ rtc[j] = v;
+ }
+ rtc_write(addr, save);
+ return rtc;
+}
+
+static void phantom_rtc_write(int addr, unsigned char rtc[8])
+{
+ int i, j;
+ unsigned char v;
+ unsigned char save = rtc_read(addr);
+ for (j = 0; j < 8; j++) {
+ v = phantom_rtc_sequence[j];
+ for (i = 0; i < 8; i++) {
+ rtc_write(addr, v & 1);
+ v >>= 1;
+ }
+ }
+ for (j = 0; j < 8; j++) {
+ v = rtc[j];
+ for (i = 0; i < 8; i++) {
+ rtc_write(addr, v & 1);
+ v >>= 1;
+ }
+ }
+ rtc_write(addr, save);
+}
+
+static int get_phantom_flag(void)
+{
+ int i;
+ unsigned char rtc[8];
+
+ phantom_rtc_read(RTC_BASE, rtc);
+
+ for(i = 1; i < 8; i++) {
+ if (rtc[i] != rtc[0])
+ return 1;
+ }
+ return 0;
+}
+
+void rtc_reset(void)
+{
+ if (phantom_flag < 0)
+ phantom_flag = get_phantom_flag();
+
+ if (phantom_flag) {
+ unsigned char rtc[8];
+ phantom_rtc_read(RTC_BASE, rtc);
+ if(rtc[4] & 0x30) {
+ printf( "real-time-clock was stopped. Now starting...\n" );
+ rtc[4] &= 0x07;
+ phantom_rtc_write(RTC_BASE, rtc);
+ }
+ } else {
+ uchar reg_a, reg_b, reg_c;
+ reg_a = rtc_read( RTC_CONTROLA );
+ reg_b = rtc_read( RTC_CONTROLB );
+
+ if ( reg_b & RTC_CB_OSC_DISABLE )
+ {
+ printf( "real-time-clock was stopped. Now starting...\n" );
+ reg_a |= RTC_CA_WRITE;
+ reg_b &= ~RTC_CB_OSC_DISABLE;
+ rtc_write( RTC_CONTROLA, reg_a );
+ rtc_write( RTC_CONTROLB, reg_b );
+ }
+
+ /* make sure read/write clock register bits are cleared */
+ reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ );
+ rtc_write( RTC_CONTROLA, reg_a );
+
+ reg_c = rtc_read( RTC_CONTROLC );
+ if (( reg_c & RTC_CC_BATTERY_FLAG ) == 0 )
+ printf( "RTC battery low. Clock setting may not be reliable.\n");
+ }
+}
+
+inline unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+inline unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
+
+static int get_century_flag(void)
+{
+ int flag = 0;
+ int bcd, century;
+ bcd = rtc_read( RTC_CENTURY );
+ century = bcd2bin( bcd & 0x3F );
+ rtc_write( RTC_CENTURY, bin2bcd(century+1));
+ if (bcd == rtc_read( RTC_CENTURY ))
+ flag = 1;
+ rtc_write( RTC_CENTURY, bcd);
+ return flag;
+}
+
+void rtc_get( struct rtc_time *tmp)
+{
+ if (phantom_flag < 0)
+ phantom_flag = get_phantom_flag();
+
+ if (phantom_flag)
+ {
+ unsigned char rtc[8];
+
+ phantom_rtc_read(RTC_BASE, rtc);
+
+ tmp->tm_sec = bcd2bin(rtc[1] & 0x7f);
+ tmp->tm_min = bcd2bin(rtc[2] & 0x7f);
+ tmp->tm_hour = bcd2bin(rtc[3] & 0x1f);
+ tmp->tm_wday = bcd2bin(rtc[4] & 0x7);
+ tmp->tm_mday = bcd2bin(rtc[5] & 0x3f);
+ tmp->tm_mon = bcd2bin(rtc[6] & 0x1f);
+ tmp->tm_year = bcd2bin(rtc[7]) + 1900;
+ tmp->tm_yday = 0;
+ tmp->tm_isdst = 0;
+
+ if( (rtc[3] & 0x80) && (rtc[3] & 0x40) ) tmp->tm_hour += 12;
+ if (tmp->tm_year < 1970) tmp->tm_year += 100;
+ } else {
+ uchar sec, min, hour;
+ uchar mday, wday, mon, year;
+
+ int century;
+
+ uchar reg_a;
+
+ if (century_flag < 0)
+ century_flag = get_century_flag();
+
+ reg_a = rtc_read( RTC_CONTROLA );
+ /* lock clock registers for read */
+ rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ ));
+
+ sec = rtc_read( RTC_SECONDS );
+ min = rtc_read( RTC_MINUTES );
+ hour = rtc_read( RTC_HOURS );
+ mday = rtc_read( RTC_DAY_OF_MONTH );
+ wday = rtc_read( RTC_DAY_OF_WEEK );
+ mon = rtc_read( RTC_MONTH );
+ year = rtc_read( RTC_YEAR );
+ century = rtc_read( RTC_CENTURY );
+
+ /* unlock clock registers after read */
+ rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ ));
+
+ tmp->tm_sec = bcd2bin( sec & 0x7F );
+ tmp->tm_min = bcd2bin( min & 0x7F );
+ tmp->tm_hour = bcd2bin( hour & 0x3F );
+ tmp->tm_mday = bcd2bin( mday & 0x3F );
+ tmp->tm_mon = bcd2bin( mon & 0x1F );
+ tmp->tm_wday = bcd2bin( wday & 0x07 );
+
+ if (century_flag) {
+ tmp->tm_year = bcd2bin( year ) +
+ ( bcd2bin( century & 0x3F ) * 100 );
+ } else {
+ tmp->tm_year = bcd2bin( year ) + 1900;
+ if (tmp->tm_year < 1970) tmp->tm_year += 100;
+ }
+
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+ }
+}
+
+void rtc_set( struct rtc_time *tmp )
+{
+ if (phantom_flag < 0)
+ phantom_flag = get_phantom_flag();
+
+ if (phantom_flag) {
+ uint year;
+ unsigned char rtc[8];
+
+ year = tmp->tm_year;
+ year -= (year < 2000) ? 1900 : 2000;
+
+ rtc[0] = bin2bcd(0);
+ rtc[1] = bin2bcd(tmp->tm_sec);
+ rtc[2] = bin2bcd(tmp->tm_min);
+ rtc[3] = bin2bcd(tmp->tm_hour);
+ rtc[4] = bin2bcd(tmp->tm_wday);
+ rtc[5] = bin2bcd(tmp->tm_mday);
+ rtc[6] = bin2bcd(tmp->tm_mon);
+ rtc[7] = bin2bcd(year);
+
+ phantom_rtc_write(RTC_BASE, rtc);
+ } else {
+ uchar reg_a;
+ if (century_flag < 0)
+ century_flag = get_century_flag();
+
+ /* lock clock registers for write */
+ reg_a = rtc_read( RTC_CONTROLA );
+ rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE ));
+
+ rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon ));
+
+ rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday ));
+ rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday ));
+ rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour ));
+ rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min ));
+ rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec ));
+
+ /* break year up into century and year in century */
+ if (century_flag) {
+ rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 ));
+ rtc_write( RTC_CENTURY, bin2bcd( tmp->tm_year / 100 ));
+ reg_a &= 0xc0;
+ reg_a |= bin2bcd( tmp->tm_year / 100 );
+ } else {
+ rtc_write(RTC_YEAR, bin2bcd(tmp->tm_year -
+ ((tmp->tm_year < 2000) ? 1900 : 2000)));
+ }
+
+ /* unlock clock registers after read */
+ rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_WRITE ));
+ }
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*-----------------------------------------------------------------------
+ * Timer value for timer 2, ICLK = 10
+ *
+ * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
+ * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
+ *
+ * SPEED_FCOUNT2 timer 2 counting frequency
+ * GCLK CPU clock
+ * SPEED_TMR2_PS prescaler
+ */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+
+/*-----------------------------------------------------------------------
+ * Timer value for PIT
+ *
+ * PIT_TIME = SPEED_PITC / PITRTCLK
+ * PITRTCLK = 8192
+ */
+#define SPEED_PITC (82 << 16) /* start counting from 82 */
+
+/*
+ * The new value for PTA is calculated from
+ *
+ * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock !)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ * DFBRG For normal mode (no clock reduction) always 0
+ * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
+ * NCS Number of SDRAM banks (chip selects) on this UPM.
+ */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc824x/start.o (.text)
+ lib_ppc/board.o (.text)
+ lib_ppc/ppcstring.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
-#ifdef __I386__
+#ifndef __PPC__
#include <asm/io.h>
+#ifdef __MIPS__
+/* Macros depend on this variable */
+static unsigned long mips_io_port_base = 0;
+#endif
#endif
#ifdef CONFIG_SHOW_BOOT_PROGRESS
#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#ifdef CONFIG_IDE_8xx_DIRECT
/* Timings for IDE Interface
*
* SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
+#endif /* CONFIG_IDE_8xx_DIRECT */
+
/* ------------------------------------------------------------------------- */
/* Current I/O Device */
#endif
};
-#ifdef __PPC__
+
#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
-#endif
#ifndef CONFIG_AMIGAONEG3SE
static int ide_bus_ok[CFG_IDE_MAXBUS];
#ifdef CONFIG_IDE_8xx_DIRECT
static void set_pcmcia_timing (int pmode);
-#else
-#define set_pcmcia_timing(a) /* dummy */
#endif
/* ------------------------------------------------------------------------- */
void ide_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_IDE_8xx_DIRECT
+ DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
#endif
WATCHDOG_RESET();
+#ifdef CONFIG_IDE_8xx_DIRECT
/* Initialize PIO timing tables */
for (i=0; i <= IDE_MAX_PIO_MODE; ++i) {
pio_config_clk[i].t_setup = PCMCIA_MK_CLKS(pio_config_ns[i].t_setup,
pio_config_ns[i].t_length, pio_config_clk[i].t_length,
pio_config_ns[i].t_hold, pio_config_clk[i].t_hold);
}
+#endif /* CONFIG_IDE_8xx_DIRECT */
/* Reset the IDE just to be sure.
* Light LED's to show
#ifdef CONFIG_IDE_8xx_DIRECT
/* PCMCIA / IDE initialization for common mem space */
pcmp->pcmc_pgcrb = 0;
-#endif
/* start in PIO mode 0 - most relaxed timings */
pio_mode = 0;
set_pcmcia_timing (pio_mode);
+#endif /* CONFIG_IDE_8xx_DIRECT */
/*
* Wait for IDE to get ready.
static void __inline__
ide_outb(int dev, int port, unsigned char val)
{
- outb(val, port);
+ outb(val, ATA_CURR_BASE(dev)+port);
}
#endif /* __PPC__ */
static unsigned char __inline__
ide_inb(int dev, int port)
{
- return inb(port);
+ return inb(ATA_CURR_BASE(dev)+port);
}
#endif /* __PPC__ */
static void
output_data(int dev, ulong *sect_buf, int words)
{
- outsw(ATA_DATA_REG, sect_buf, words<<1);
+ outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1);
}
#endif /* __PPC__ */
static void
input_data(int dev, ulong *sect_buf, int words)
{
- insw(ATA_DATA_REG, sect_buf, words << 1);
+ insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1);
}
#endif /* __PPC__ */
static void
output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
- outsw(ATA_DATA_REG, sect_buf, shorts);
+ outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
}
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
- insw(ATA_DATA_REG, sect_buf, shorts);
+ insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
}
#endif /* __PPC__ */
void init_cmd_timeout(void);
void reset_cmd_timeout(void);
-/* common/board.c */
+/* lib_$(ARCH)/board.c */
void board_init_f (ulong);
void board_init_r (gd_t *, ulong);
int checkboard (void);
void flush_cache (unsigned long, unsigned long);
-/* ppc/ticks.S */
+/* lib_$(ARCH)/ticks.S */
unsigned long long get_ticks(void);
void wait_ticks (unsigned long);
-/* ppc/time.c */
+/* lib_$(ARCH)/time.c */
void udelay (unsigned long);
ulong usec2ticks (unsigned long usec);
ulong ticks2usec (unsigned long ticks);
int init_timebase (void);
-/* ppc/vsprintf.c */
+/* lib_generic/vsprintf.c */
ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
long simple_strtol(const char *cp,char **endp,unsigned int base);
void panic(const char *fmt, ...);
int sprintf(char * buf, const char *fmt, ...);
int vsprintf(char *buf, const char *fmt, va_list args);
-/* ppc/crc32.c */
+/* lib_generic/crc32.c */
ulong crc32 (ulong, const unsigned char *, uint);
ulong crc32_no_comp (ulong, const unsigned char *, uint);
--- /dev/null
+/*
+ * (C) Copyright 2001, 2002
+ * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Environments */
+
+/* bootargs */
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,9600 init=/linuxrc " \
+ "root=/dev/nfs rw nfsroot=192.168.0.1:" \
+ "/tftpboot/target " \
+ "ip=192.168.0.2:192.168.0.1:192.168.0.1:" \
+ "255.255.255.0:debris:eth0:none " \
+ "mtdparts=phys:12m(root),-(kernel)"
+
+/* bootcmd */
+#define CONFIG_BOOTCOMMAND \
+ "tftp 800000 pImage; " \
+ "setenv bootargs console=ttyS0,9600 init=/linuxrc " \
+ "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):eth0:none " \
+ "mtdparts=phys:12m(root),-(kernel); " \
+ "bootm 800000"
+
+/* bootdelay */
+#define CONFIG_BOOTDELAY 5 /* autoboot 5s */
+
+/* baudrate */
+#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
+
+/* loads_echo */
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+
+/* ethaddr */
+#undef CONFIG_ETHADDR
+
+/* eth2addr */
+#undef CONFIG_ETH2ADDR
+
+/* eth3addr */
+#undef CONFIG_ETH3ADDR
+
+/* ipaddr */
+#define CONFIG_IPADDR 192.168.0.2
+
+/* serverip */
+#define CONFIG_SERVERIP 192.168.0.1
+
+/* autoload */
+#undef CFG_AUTOLOAD
+
+/* rootpath */
+#define CONFIG_ROOTPATH /tftpboot/target
+
+/* gatewayip */
+#define CONFIG_GATEWAYIP 192.168.0.1
+
+/* netmask */
+#define CONFIG_NETMASK 255.255.255.0
+
+/* hostname */
+#define CONFIG_HOSTNAME debris
+
+/* bootfile */
+#define CONFIG_BOOTFILE pImage
+
+/* loadaddr */
+#define CONFIG_LOADADDR 800000
+
+/* preboot */
+#undef CONFIG_PREBOOT
+
+/* clocks_in_mhz */
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_DEBRIS 1
+
+#if 0
+#define USE_DINK32 1
+#else
+#undef USE_DINK32
+#endif
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_DRAM_SPEED 100 /* MHz */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_KGBD | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_SAVES | \
+ CFG_CMD_SDRAM)
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#if defined (USE_DINK32)
+#define CFG_MONITOR_LEN 0x00040000
+#define CFG_MONITOR_BASE 0x00090000
+#define CFG_RAMBOOT 1
+#define CFG_INIT_RAM_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_INIT_RAM_END 0x10000
+#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#else
+#undef CFG_RAMBOOT
+#define CFG_MONITOR_LEN 0x00040000
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+#endif
+
+#define CFG_FLASH_BASE 0x7C000000
+#define CFG_FLASH_SIZE (16*1024*1024) /* debris has tiny eeprom */
+
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
+#define CFG_FLASH_RANGE_SIZE 0x01000000
+#define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */
+
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1
+
+#define CFG_ENV_IS_IN_NVRAM 1
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_NVRAM_ACCESS_ROUTINE 1
+#define CFG_ENV_ADDR 0xFF000000 /* right at the start of NVRAM */
+#define CFG_ENV_SIZE 0x400 /* Size of the Environment - 8K */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+
+#define CFG_NVRAM_BASE_ADDR 0xff000000
+
+/*
+ * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_VXWORKS_OFFS =
+ * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET
+ */
+#define CFG_NVRAM_VXWORKS_OFFS 0x6900
+
+/*
+ * select i2c support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#ifdef CONFIG_SOFT_I2C
+#error "Soft I2C is not configured properly. Please review!"
+#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00010000)
+#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
+#define I2C_READ ((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
+ else iop->pdat &= ~0x00010000
+#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
+ else iop->pdat &= ~0x00020000
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_FLASH_BANKS { FLASH_BASE0_PRELIM }
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 7372800
+
+#define CFG_NS16550_COM1 0xFF080000
+#define CFG_NS16550_COM2 (CFG_NS16550_COM1 + 8)
+#define CFG_NS16550_COM3 (CFG_NS16550_COM1 + 16)
+#define CFG_NS16550_COM4 (CFG_NS16550_COM1 + 24)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
+
+#define CFG_DLL_EXTEND 0x00
+#define CFG_PCI_HOLD_DEL 0x20
+
+#define CFG_ROMNAL 15 /* rom/flash next access time */
+#define CFG_ROMFAL 31 /* rom/flash access time */
+
+#define CFG_REFINT 430 /* # of clocks between CBR refresh cycles */
+
+#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
+
+/* the following are for SDRAM only*/
+#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
+#define CFG_REFREC 8 /* Refresh to activate interval */
+#define CFG_RDLAT 4 /* data latency from read command */
+#define CFG_PRETOACT 3 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_ACTORW 3 /* Activate to R/W */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#if 0
+#define CFG_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
+#endif
+
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+
+/* memory bank settings*/
+/*
+ * only bits 20-29 are actually used from these vales to set the
+ * start/end address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (0x4000000 - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x04000000
+#define CFG_BANK1_END (0x8000000 - 1)
+#define CFG_BANK1_ENABLE 1
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x00000000
+#define CFG_BANK4_END 0x00000000
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x00000000
+#define CFG_BANK5_END 0x00000000
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x00000000
+#define CFG_BANK6_END 0x00000000
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x00000000
+#define CFG_BANK7_END 0x00000000
+#define CFG_BANK7_ENABLE 0
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE 0x01
+
+#define CFG_ODCR 0x75 /* configures line driver impedances, */
+ /* see 8240 book for bit definitions */
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE @ 1GB (no backing mem) */
+#if defined(USE_DINK32)
+#define CFG_IBAT1L (0x40000000 | BATL_PP_00 )
+#define CFG_IBAT1U (0x40000000 | BATU_BL_128K )
+#else
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#endif
+
+/* PCI memory */
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Flash, config addrs, etc */
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/* values according to the manual */
+
+#define CONFIG_DRAM_50MHZ 1
+#define CONFIG_SDRAM_50MHZ
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+#endif /* __CONFIG_H */
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_ATTRB_ADDR
/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET (CFG_ATA_BASE_ADDR)
+#define CFG_ATA_DATA_OFFSET 0
/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET (CFG_ATA_BASE_ADDR)
+#define CFG_ATA_REG_OFFSET 0
/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET (CFG_ATA_BASE_ADDR)
+#define CFG_ATA_ALT_OFFSET 0
/*-----------------------------------------------------------------------
*/
projects / karo-tx-uboot.git / commitdiff