mx6: soc: Update the comments of set_ldo_voltage()

Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces
set_ldo_voltage() function that can be used to set the voltages
of any of the three LDO regulators controlled by the PMU_REG_CORE register.

Prior to this commit there was a single set_vddsoc() which only configured the
VDDSOC regulator.

Update the comments to align with the new set_ldo_voltage() implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 172527987d573137cc1d0fde06557606669beca6..f20bdebf3fa655042813e1dd563c7fca94bddb6b 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -124,10 +124,9 @@ static void clear_ldo_ramp(void)
 }
 
 /*
 }
 
 /*

- * Set the VDDSOC
+ * Set the PMU_REG_CORE register

  *
  *

- * Mask out the REG_CORE[22:18] bits (REG2_TRIG) and set
- * them to the specified millivolt level.
+ * Set LDO_SOC/PU/ARM regulators to the specified millivolt level.

  * Possible values are from 0.725V to 1.450V in steps of
  * 0.025V (25mV).
  */
  * Possible values are from 0.725V to 1.450V in steps of
  * 0.025V (25mV).
  */