/*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2009
* BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
*
* (C) Copyright 2000-2003
#include <common.h>
#include <command.h>
#include "asm/m5282.h"
-#include "VCxK.h"
+#include <bmp_layout.h>
+#include <status_led.h>
+#include <bus_vcxk.h>
+
+/*---------------------------------------------------------------------------*/
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long display_width;
+unsigned long display_height;
+
+/*---------------------------------------------------------------------------*/
int checkboard (void)
{
return size;
}
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
int misc_init_r(void)
{
- init_vcxk();
+#ifdef CONFIG_HW_WATCHDOG
+ hw_watchdog_init();
+#endif
+#ifndef CONFIG_VIDEO
+ vcxk_init(16, 16);
+#endif
return 1;
}
+#if defined(CONFIG_VIDEO)
+
+/*
+ ****h* EB+CPU5282-T1/drv_video_init
+ * FUNCTION
+ ***
+ */
+
+int drv_video_init(void)
+{
+ char *s;
+ unsigned long splash;
+
+ printf("Init Video as ");
+
+ if ((s = getenv("displaywidth")) != NULL)
+ display_width = simple_strtoul(s, NULL, 10);
+ else
+ display_width = 256;
+
+ if ((s = getenv("displayheight")) != NULL)
+ display_height = simple_strtoul(s, NULL, 10);
+ else
+ display_height = 256;
+
+ printf("%lu x %lu pixel matrix\n", display_width, display_height);
+
+ MCFCCM_CCR &= ~MCFCCM_CCR_SZEN;
+ MCFGPIO_PEPAR &= ~MCFGPIO_PEPAR_PEPA2;
+
+ vcxk_init(display_width, display_height);
+
+#ifdef CONFIG_SPLASH_SCREEN
+ if ((s = getenv("splashimage")) != NULL) {
+ debug("use splashimage: %s\n", s);
+ splash = simple_strtoul(s, NULL, 16);
+ debug("use splashimage: %x\n", splash);
+ vcxk_acknowledge_wait();
+ video_display_bitmap(splash, 0, 0);
+ }
+#endif
+ return 0;
+}
+#endif
+
/*---------------------------------------------------------------------------*/
-int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#ifdef CONFIG_VIDEO
+int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int rcode = 0;
- ulong source;
+ ulong side;
+ ulong bright;
switch (argc) {
- case 2:
- source = simple_strtoul(argv[1],NULL,16);
- vcxk_loadimage(source);
- rcode = 0;
+ case 3:
+ side = simple_strtoul(argv[1], NULL, 10);
+ bright = simple_strtoul(argv[2], NULL, 10);
+ if ((side >= 0) && (side <= 3) &&
+ (bright >= 0) && (bright <= 1000)) {
+ vcxk_setbrightness(side, bright);
+ rcode = 0;
+ } else {
+ printf("parameters out of range\n");
+ printf("Usage:\n%s\n", cmdtp->usage);
+ rcode = 1;
+ }
break;
default:
- cmd_usage(cmdtp);
+ printf("Usage:\n%s\n", cmdtp->usage);
rcode = 1;
break;
}
return rcode;
}
-/***************************************************/
+/*---------------------------------------------------------------------------*/
U_BOOT_CMD(
- vcimage, 2, 0, do_vcimage,
- "loads an image to Display",
- "vcimage addr"
+ bright, 3, 0, do_brightness,
+ "sets the display brightness\n",
+ " <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n"
);
-/* EOF EB+MCF-EV123c */
+#endif
+
+/* EOF EB+MCF-EV123.c */
+++ /dev/null
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5282.h>
-#include "VCxK.h"
-
-vu_char *vcxk_bws = (vu_char *)(CONFIG_SYS_CS3_BASE);
-#define VCXK_BWS vcxk_bws
-
-static ulong vcxk_driver;
-
-
-ulong search_vcxk_driver(void);
-void vcxk_cls(void);
-void vcxk_setbrightness(short brightness);
-int vcxk_request(void);
-int vcxk_acknowledge_wait(void);
-void vcxk_clear(void);
-
-int init_vcxk(void)
-{
- VIDEO_Invert_CFG &= ~VIDEO_Invert_IO;
- VIDEO_INVERT_PORT |= VIDEO_INVERT_PIN;
- VIDEO_INVERT_DDR |= VIDEO_INVERT_PIN;
-
- VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
- VIDEO_REQUEST_DDR |= VIDEO_REQUEST_PIN;
-
- VIDEO_ACKNOWLEDGE_DDR &= ~VIDEO_ACKNOWLEDGE_PIN;
-
- vcxk_driver = search_vcxk_driver();
- if (vcxk_driver)
- {
- /* use flash resist driver */
- }
- else
- {
- vcxk_cls();
- vcxk_cls();
- vcxk_setbrightness(1000);
- }
- VIDEO_ENABLE_DDR |= VIDEO_ENABLE_PIN;
- VIDEO_ENABLE_PORT |= VIDEO_ENABLE_PIN;
- VIDEO_ENABLE_PORT &= ~VIDEO_ENABLE_PIN;
- return 1;
-}
-
-void vcxk_loadimage(ulong source)
-{
- int cnt;
- vcxk_acknowledge_wait();
- for (cnt=0; cnt<16384; cnt++)
- {
- VCXK_BWS[cnt*2] = (*(vu_char*) source);
- source++;
- }
- vcxk_request();
-}
-
-void vcxk_cls(void)
-{
- vcxk_acknowledge_wait();
- vcxk_clear();
- vcxk_request();
-}
-
-void vcxk_clear(void)
-{
- int cnt;
- for (cnt=0; cnt<16384; cnt++)
- {
- VCXK_BWS[cnt*2] = 0x00;
- }
-}
-
-void vcxk_setbrightness(short brightness)
-{
- VCXK_BWS[0x8000]=(brightness >> 4) +2;
- VCXK_BWS[0xC000]= (brightness + 23) >> 8;
- VCXK_BWS[0xC001]= (brightness + 23) & 0xFF;
-}
-
-int vcxk_request(void)
-{
- if (vcxk_driver)
- {
- /* use flash resist driver */
- }
- else
- {
- VIDEO_REQUEST_PORT &= ~VIDEO_REQUEST_PIN;
- VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
- }
- return 1;
-}
-
-int vcxk_acknowledge_wait(void)
-{
- if (vcxk_driver)
- {
- /* use flash resist driver */
- }
- else
- {
- while (!(VIDEO_ACKNOWLEDGE_PORT & VIDEO_ACKNOWLEDGE_PIN));
- }
- return 1;
-}
-
-ulong search_vcxk_driver(void)
-{
- return 0;
-}
-
-/* eof */
/*
* Configuation settings for the BuS EB+MCF-EV123 boards.
*
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
*
* See file CREDITS for list of people who contributed to this
* project.
#ifndef _CONFIG_EB_MCF_EV123_H_
#define _CONFIG_EB_MCF_EV123_H_
-#define CONFIG_EB_MCF_EV123
-
#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
-/*
- * High Level Configuration Options (easy to change)
- */
+/*----------------------------------------------------------------------*
+ * High Level Configuration Options (easy to change) *
+ *----------------------------------------------------------------------*/
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5282 /* define processor type */
+#define CONFIG_EB_MCF_EV123
#define CONFIG_MISC_INIT_R
#define CONFIG_BAUDRATE 9600
#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
-#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
+#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
#define CONFIG_BOOTCOMMAND "printenv"
-/* Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
- */
+/*----------------------------------------------------------------------*
+ * Options *
+ *----------------------------------------------------------------------*/
+
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_SPLASH_SCREEN
+
+/*----------------------------------------------------------------------*
+ * Configuration for environment *
+ * Environment is in the second sector of the first 256k of flash *
+ *----------------------------------------------------------------------*/
+
#ifndef CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */
#define CONFIG_ENV_SECT_SIZE 0x4000
#define CONFIG_ENV_IS_IN_FLASH 1
-/*
-#define CONFIG_ENV_IS_EMBEDDED 1
-#define CONFIG_ENV_ADDR_REDUND 0xF0018000
-#define CONFIG_ENV_SECT_SIZE_REDUND 0x4000
-*/
#else
#define CONFIG_ENV_ADDR 0xFFE04000
#define CONFIG_ENV_SECT_SIZE 0x2000
#define CONFIG_ENV_IS_IN_FLASH 1
#endif
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#define CONFIG_MCFTMR
-#define CONFIG_MCFFEC
-#ifdef CONFIG_MCFFEC
-# define CONFIG_NET_MULTI 1
-# define CONFIG_MII 1
-# define CONFIG_MII_INIT 1
-# define CONFIG_SYS_DISCOVER_PHY
-# define CONFIG_SYS_RX_ETH_BUFFER 8
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-# define CONFIG_SYS_FEC0_PINMUX 0
-# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CONFIG_SYS_DISCOVER_PHY
-# define FECDUPLEX FULL
-# define FECSPEED _100BASET
-# else
-# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# endif
-# endif /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#ifdef CONFIG_MCFFEC
-# define CONFIG_ETHADDR 00:CF:52:82:EB:01
-# define CONFIG_IPADDR 192.162.1.2
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_SERVERIP 192.162.1.1
-# define CONFIG_GATEWAYIP 192.162.1.1
-# define CONFIG_OVERWRITE_ETHADDR_ONCE
-#endif /* CONFIG_MCFFEC */
#define CONFIG_BOOTDELAY 5
-#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> "
+#define CONFIG_SYS_LONGHELP 1
#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x20000
/*#define CONFIG_SYS_DRAM_TEST 1 */
#undef CONFIG_SYS_DRAM_TEST
-/* Clock and PLL Configuration */
+/*----------------------------------------------------------------------*
+ * Clock and PLL Configuration *
+ *----------------------------------------------------------------------*/
#define CONFIG_SYS_HZ 10000000
#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
-#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
-#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
+#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
-/*
+/*----------------------------------------------------------------------*
+ * Network *
+ *----------------------------------------------------------------------*/
+
+#define CONFIG_MCFFEC
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
+#define CONFIG_MII_INIT 1
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER 8
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+#define CONFIG_SYS_FEC0_PINMUX 0
+#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+#define MCFFEC_TOUT_LOOP 50000
+
+#define CONFIG_ETHADDR 00:CF:52:82:EB:01
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+/*-------------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
- */
-#define CONFIG_SYS_MBAR 0x40000000
+ *-----------------------------------------------------------------------*/
+
+#define CONFIG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+ *-----------------------------------------------------------------------*/
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE 64
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE1 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
-
-/*
-#define CONFIG_SYS_SDRAM_BASE0 CONFIG_SYS_SDRAM_BASE1+CONFIG_SYS_SDRAM_SIZE1*1024*1024
-#define CONFIG_SYS_SDRAM_SIZE0 16 */ /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
-#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
+
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
+#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
+
#define CONFIG_SYS_MAX_FLASH_SECT 35
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
#define CONFIG_SYS_PCDAT 0x0000000
#define CONFIG_SYS_PEHLPAR 0xC0
-#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
+#define CONFIG_SYS_PUAPAR 0x0F
#define CONFIG_SYS_DDRUA 0x05
#define CONFIG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
- * CCM configuration
+ * VIDEO configuration
*/
-#define CONFIG_SYS_CCM_SIZ 0
+#define CONFIG_VIDEO
-/*---------------------------------------------------------------------*/
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_VCXK 1
+
+#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
+#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
+#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE
+#define CONFIG_SYS_VCXK_AUTODETECT 1
+
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
+
+#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
+
+#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
+
+#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
+#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
+#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
+
+#endif /* CONFIG_VIDEO */
#endif /* _CONFIG_M5282EVB_H */
/*---------------------------------------------------------------------*/
projects / karo-tx-uboot.git / commitdiff