#include <asm/e300.h>
#endif
-/* MPC83xx cpu provide RCR register to do reset thing specially
+/*
+ * MPC83xx cpu provide RCR register to do reset thing specially
*/
#define MPC83xx_RESET
-/* System reset offset (PowerPC standard)
+/*
+ * System reset offset (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100
#define _START_OFFSET EXC_OFF_SYS_RESET
-/* IMMRBAR - Internal Memory Register Base Address
+/*
+ * IMMRBAR - Internal Memory Register Base Address
*/
#ifndef CONFIG_DEFAULT_IMMR
-#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
+/* Default IMMR base address */
+#define CONFIG_DEFAULT_IMMR 0xFF400000
#endif
-#define IMMRBAR 0x0000 /* Register offset to immr */
-#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
+/* Register offset to immr */
+#define IMMRBAR 0x0000
+#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base addr. mask */
#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
-/* LAWBAR - Local Access Window Base Address Register
+/*
+ * LAWBAR - Local Access Window Base Address Register
*/
-#define LBLAWBAR0 0x0020 /* Register offset to immr */
+/* Register offset to immr */
+#define LBLAWBAR0 0x0020
#define LBLAWAR0 0x0024
#define LBLAWBAR1 0x0028
#define LBLAWAR1 0x002C
#define LBLAWAR2 0x0034
#define LBLAWBAR3 0x0038
#define LBLAWAR3 0x003C
-#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */
+#define LAWBAR_BAR 0xFFFFF000 /* Base addr. mask */
-/* SPRIDR - System Part and Revision ID Register
+/*
+ * SPRIDR - System Part and Revision ID Register
*/
#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */
#define SPRIDR_REVID 0x0000FFFF /* Revision Id */
#define SPR_8378 0x80C4
#define SPR_8379 0x80C2
-/* SPCR - System Priority Configuration Register
+/*
+ * SPCR - System Priority Configuration Register
*/
-#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
+/* PCI Highest Priority Enable */
+#define SPCR_PCIHPE 0x10000000
#define SPCR_PCIHPE_SHIFT (31-3)
-#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */
+/* PCI bridge system bus request priority */
+#define SPCR_PCIPR 0x03000000
#define SPCR_PCIPR_SHIFT (31-7)
#define SPCR_OPT 0x00800000 /* Optimize */
#define SPCR_OPT_SHIFT (31-8)
-#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */
+/* E300 PowerPC core time base unit enable */
+#define SPCR_TBEN 0x00400000
#define SPCR_TBEN_SHIFT (31-9)
-#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */
+/* E300 PowerPC Core system bus request priority */
+#define SPCR_COREPR 0x00300000
#define SPCR_COREPR_SHIFT (31-11)
#if defined(CONFIG_MPC834x)
/* SPCR bits - MPC8349 specific */
-#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority */
+/* TSEC1 data priority */
+#define SPCR_TSEC1DP 0x00003000
#define SPCR_TSEC1DP_SHIFT (31-19)
-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority */
+/* TSEC1 buffer descriptor priority */
+#define SPCR_TSEC1BDP 0x00000C00
#define SPCR_TSEC1BDP_SHIFT (31-21)
-#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority */
+/* TSEC1 emergency priority */
+#define SPCR_TSEC1EP 0x00000300
#define SPCR_TSEC1EP_SHIFT (31-23)
-#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority */
+/* TSEC2 data priority */
+#define SPCR_TSEC2DP 0x00000030
#define SPCR_TSEC2DP_SHIFT (31-27)
-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority */
+/* TSEC2 buffer descriptor priority */
+#define SPCR_TSEC2BDP 0x0000000C
#define SPCR_TSEC2BDP_SHIFT (31-29)
-#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
+/* TSEC2 emergency priority */
+#define SPCR_TSEC2EP 0x00000003
#define SPCR_TSEC2EP_SHIFT (31-31)
#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
/* SPCR bits - MPC8308, MPC831x and MPC837x specific */
-#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
+/* TSEC data priority */
+#define SPCR_TSECDP 0x00003000
#define SPCR_TSECDP_SHIFT (31-19)
-#define SPCR_TSECBDP 0x00000C00 /* TSEC buffer descriptor priority */
+/* TSEC buffer descriptor priority */
+#define SPCR_TSECBDP 0x00000C00
#define SPCR_TSECBDP_SHIFT (31-21)
-#define SPCR_TSECEP 0x00000300 /* TSEC emergency priority */
+/* TSEC emergency priority */
+#define SPCR_TSECEP 0x00000300
#define SPCR_TSECEP_SHIFT (31-23)
#endif
#define SICRH_TSOBI2_V2P5 (1 << 0)
#endif
-/* SWCRR - System Watchdog Control Register
+/*
+ * SWCRR - System Watchdog Control Register
*/
-#define SWCRR 0x0204 /* Register offset to immr */
-#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */
-#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */
-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */
-#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */
-#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
-
-/* SWCNR - System Watchdog Counter Register
+/* Register offset to immr */
+#define SWCRR 0x0204
+/* Software Watchdog Time Count */
+#define SWCRR_SWTC 0xFFFF0000
+/* Watchdog Enable bit */
+#define SWCRR_SWEN 0x00000004
+/* Software Watchdog Reset/Interrupt Select bit */
+#define SWCRR_SWRI 0x00000002
+/* Software Watchdog Counter Prescale bit */
+#define SWCRR_SWPR 0x00000001
+#define SWCRR_RES (~(SWCRR_SWTC | SWCRR_SWEN | \
+ SWCRR_SWRI | SWCRR_SWPR))
+
+/*
+ * SWCNR - System Watchdog Counter Register
*/
-#define SWCNR 0x0208 /* Register offset to immr */
-#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */
+/* Register offset to immr */
+#define SWCNR 0x0208
+/* Software Watchdog Count mask */
+#define SWCNR_SWCN 0x0000FFFF
#define SWCNR_RES ~(SWCNR_SWCN)
-/* SWSRR - System Watchdog Service Register
+/*
+ * SWSRR - System Watchdog Service Register
*/
-#define SWSRR 0x020E /* Register offset to immr */
+/* Register offset to immr */
+#define SWSRR 0x020E
-/* ACR - Arbiter Configuration Register
+/*
+ * ACR - Arbiter Configuration Register
*/
#define ACR_COREDIS 0x10000000 /* Core disable */
#define ACR_COREDIS_SHIFT (31-7)
#define ACR_PARKM 0x0000000F /* Parking master */
#define ACR_PARKM_SHIFT (31-31)
-/* ATR - Arbiter Timers Register
+/*
+ * ATR - Arbiter Timers Register
*/
#define ATR_DTO 0x00FF0000 /* Data time out */
#define ATR_DTO_SHIFT 16
#define ATR_ATO 0x000000FF /* Address time out */
#define ATR_ATO_SHIFT 0
-/* AER - Arbiter Event Register
+/*
+ * AER - Arbiter Event Register
*/
#define AER_ETEA 0x00000020 /* Transfer error */
-#define AER_RES 0x00000010 /* Reserved transfer type */
-#define AER_ECW 0x00000008 /* External control word transfer type */
-#define AER_AO 0x00000004 /* Address Only transfer type */
+/* Reserved transfer type */
+#define AER_RES 0x00000010
+/* External control word transfer type */
+#define AER_ECW 0x00000008
+/* Address Only transfer type */
+#define AER_AO 0x00000004
#define AER_DTO 0x00000002 /* Data time out */
#define AER_ATO 0x00000001 /* Address time out */
-/* AEATR - Arbiter Event Address Register
+/*
+ * AEATR - Arbiter Event Address Register
*/
#define AEATR_EVENT 0x07000000 /* Event type */
#define AEATR_EVENT_SHIFT 24
#define AEATR_TTYPE 0x0000001F /* Transfer Type */
#define AEATR_TTYPE_SHIFT 0
-/* HRCWL - Hard Reset Configuration Word Low
+/*
+ * HRCWL - Hard Reset Configuration Word Low
*/
#define HRCWL_LBIUCM 0x80000000
#define HRCWL_LBIUCM_SHIFT 31
#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
-/* HRCWH - Hardware Reset Configuration Word High
+/*
+ * HRCWH - Hardware Reset Configuration Word High
*/
#define HRCWH_PCI_HOST 0x80000000
#define HRCWH_PCI_HOST_SHIFT 31
#define HRCWH_LDP_SET 0x00000000
#define HRCWH_LDP_CLEAR 0x00000002
-/* RSR - Reset Status Register
+/*
+ * RSR - Reset Status Register
*/
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
#endif
#define RSR_BSF 0x00010000 /* Boot seq. fail */
#define RSR_BSF_SHIFT 16
-#define RSR_SWSR 0x00002000 /* software soft reset */
+/* software soft reset */
+#define RSR_SWSR 0x00002000
#define RSR_SWSR_SHIFT 13
-#define RSR_SWHR 0x00001000 /* software hard reset */
+/* software hard reset */
+#define RSR_SWHR 0x00001000
#define RSR_SWHR_SHIFT 12
#define RSR_JHRS 0x00000200 /* jtag hreset */
#define RSR_JHRS_SHIFT 9
-#define RSR_JSRS 0x00000100 /* jtag sreset status */
+/* jtag sreset status */
+#define RSR_JSRS 0x00000100
#define RSR_JSRS_SHIFT 8
-#define RSR_CSHR 0x00000010 /* checkstop reset status */
+/* checkstop reset status */
+#define RSR_CSHR 0x00000010
#define RSR_CSHR_SHIFT 4
-#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+/* software watchdog reset status */
+#define RSR_SWRS 0x00000008
#define RSR_SWRS_SHIFT 3
-#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+/* bus monitop reset status */
+#define RSR_BMRS 0x00000004
#define RSR_BMRS_SHIFT 2
#define RSR_SRS 0x00000002 /* soft reset status */
#define RSR_SRS_SHIFT 1
#define RSR_HRS 0x00000001 /* hard reset status */
#define RSR_HRS_SHIFT 0
-#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR |\
- RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
- RSR_BMRS | RSR_SRS | RSR_HRS)
-/* RMR - Reset Mode Register
+#define RSR_RES (~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | \
+ RSR_SWHR | RSR_JHRS | \
+ RSR_JSRS | RSR_CSHR | \
+ RSR_SWRS | RSR_BMRS | \
+ RSR_SRS | RSR_HRS))
+/*
+ * RMR - Reset Mode Register
*/
-#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+/* checkstop reset enable */
+#define RMR_CSRE 0x00000001
#define RMR_CSRE_SHIFT 0
#define RMR_RES ~(RMR_CSRE)
-/* RCR - Reset Control Register
+/*
+ * RCR - Reset Control Register
*/
-#define RCR_SWHR 0x00000002 /* software hard reset */
-#define RCR_SWSR 0x00000001 /* software soft reset */
+/* software hard reset */
+#define RCR_SWHR 0x00000002
+/* software soft reset */
+#define RCR_SWSR 0x00000001
#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
-/* RCER - Reset Control Enable Register
+/*
+ * RCER - Reset Control Enable Register
*/
-#define RCER_CRE 0x00000001 /* software hard reset */
+/* software hard reset */
+#define RCER_CRE 0x00000001
#define RCER_RES ~(RCER_CRE)
-/* SPMR - System PLL Mode Register
+/*
+ * SPMR - System PLL Mode Register
*/
#define SPMR_LBIUCM 0x80000000
#define SPMR_LBIUCM_SHIFT 31
#define SPMR_CEPMF 0x0000001F
#define SPMR_CEPMF_SHIFT 0
-/* OCCR - Output Clock Control Register
+/*
+ * OCCR - Output Clock Control Register
*/
#define OCCR_PCICOE0 0x80000000
#define OCCR_PCICOE1 0x40000000
#define OCCR_PCI2CR 0x00000001
#define OCCR_PCICR OCCR_PCI1CR
-/* SCCR - System Clock Control Register
+/*
+ * SCCR - System Clock Control Register
*/
#define SCCR_ENCCM 0x03000000
#define SCCR_ENCCM_SHIFT 24
#define SCCR_PCIEXP2CM_2 0x00080000
#define SCCR_PCIEXP2CM_3 0x000c0000
-/* CSn_BDNS - Chip Select memory Bounds Register
+/*
+ * CSn_BDNS - Chip Select memory Bounds Register
*/
#define CSBNDS_SA 0x00FF0000
#define CSBNDS_SA_SHIFT 8
#define CSBNDS_EA 0x000000FF
#define CSBNDS_EA_SHIFT 24
-/* CSn_CONFIG - Chip Select Configuration Register
+/*
+ * CSn_CONFIG - Chip Select Configuration Register
*/
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
#define CSCONFIG_COL_BIT_10 0x00000002
#define CSCONFIG_COL_BIT_11 0x00000003
-/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0
+/*
+ * TIMING_CFG_0 - DDR SDRAM Timing Configuration 0
*/
#define TIMING_CFG0_RWT 0xC0000000
#define TIMING_CFG0_RWT_SHIFT 30
#define TIMING_CFG0_MRS_CYC 0x0000000F
#define TIMING_CFG0_MRS_CYC_SHIFT 0
-/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
+/*
+ * TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
*/
#define TIMING_CFG1_PRETOACT 0x70000000
#define TIMING_CFG1_PRETOACT_SHIFT 28
#define TIMING_CFG1_CASLAT_45 0x00080000 /* CAS latency = 4.5 */
#define TIMING_CFG1_CASLAT_50 0x00090000 /* CAS latency = 5.0 */
-/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
+/*
+ * TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
*/
#define TIMING_CFG2_CPO 0x0F800000
#define TIMING_CFG2_CPO_SHIFT 23
#define TIMING_CFG2_ACSM 0x00080000
#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
-#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */
+/* default (= CASLAT + 1) */
+#define TIMING_CFG2_CPO_DEF 0x00000000
#define TIMING_CFG2_ADD_LAT 0x70000000
#define TIMING_CFG2_ADD_LAT_SHIFT 28
#define TIMING_CFG2_FOUR_ACT 0x0000003F
#define TIMING_CFG2_FOUR_ACT_SHIFT 0
-/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
+/*
+ * DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
#define SDRAM_CFG_SREN 0x40000000
#define SDRAM_CFG_HSE 0x00000008
#define SDRAM_CFG_BI 0x00000001
-/* DDR_SDRAM_MODE - DDR SDRAM Mode Register
+/*
+ * DDR_SDRAM_MODE - DDR SDRAM Mode Register
*/
#define SDRAM_MODE_ESD 0xFFFF0000
#define SDRAM_MODE_ESD_SHIFT 16
#define SDRAM_MODE_SD 0x0000FFFF
#define SDRAM_MODE_SD_SHIFT 0
-#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */
-#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */
+/* select extended mode reg */
+#define DDR_MODE_EXT_MODEREG 0x4000
+/* operating mode, mask */
+#define DDR_MODE_EXT_OPMODE 0x3FF8
#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */
-#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */
-#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */
-#define DDR_MODE_WEAK 0x0002 /* weak drivers */
-#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */
-#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */
+/* QFC / compatibility, mask */
+#define DDR_MODE_QFC 0x0004
+/* compatible to older SDRAMs */
+#define DDR_MODE_QFC_COMP 0x0000
+/* weak drivers */
+#define DDR_MODE_WEAK 0x0002
+/* disable DLL */
+#define DDR_MODE_DLL_DIS 0x0001
+/* CAS latency, mask */
+#define DDR_MODE_CASLAT 0x0070
#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */
#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */
#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */
#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */
-#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */
-#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */
+/* sequential burst */
+#define DDR_MODE_BTYPE_SEQ 0x0000
+/* interleaved burst */
+#define DDR_MODE_BTYPE_ILVD 0x0008
#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */
#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */
-#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125us */
-#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */
-#define DDR_MODE_MODEREG 0x0000 /* select mode register */
+/* exact value for 7.8125us */
+#define DDR_REFINT_166MHZ_7US 1302
+/* use 256 cycles as a starting point */
+#define DDR_BSTOPRE 256
+/* select mode register */
+#define DDR_MODE_MODEREG 0x0000
-/* DDR_SDRAM_INTERVAL - DDR SDRAM Interval Register
+/*
+ * DDR_SDRAM_INTERVAL - DDR SDRAM Interval Register
*/
#define SDRAM_INTERVAL_REFINT 0x3FFF0000
#define SDRAM_INTERVAL_REFINT_SHIFT 16
#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
-/* DDR_SDRAM_CLK_CNTL - DDR SDRAM Clock Control Register
+/*
+ * DDR_SDRAM_CLK_CNTL - DDR SDRAM Clock Control Register
*/
#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000
#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000
#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000
#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000
-/* ECC_ERR_INJECT - Memory data path error injection mask ECC
+/*
+ * ECC_ERR_INJECT - Memory data path error injection mask ECC
*/
-#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */
-#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */
-#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */
+/* ECC Mirror Byte */
+#define ECC_ERR_INJECT_EMB (0x80000000 >> 22)
+/* Error Injection Enable */
+#define ECC_ERR_INJECT_EIEN (0x80000000 >> 23)
+/* ECC Erroe Injection Enable */
+#define ECC_ERR_INJECT_EEIM (0xff000000 >> 24)
#define ECC_ERR_INJECT_EEIM_SHIFT 0
-/* CAPTURE_ECC - Memory data path read capture ECC
+/*
+ * CAPTURE_ECC - Memory data path read capture ECC
*/
-#define CAPTURE_ECC_ECE (0xff000000>>24)
+#define CAPTURE_ECC_ECE (0xff000000 >> 24)
#define CAPTURE_ECC_ECE_SHIFT 0
-/* ERR_DETECT - Memory error detect
+/*
+ * ERR_DETECT - Memory error detect
*/
-#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */
-#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */
-#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */
-#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */
+/* Multiple Memory Errors */
+#define ECC_ERROR_DETECT_MME (0x80000000 >> 0)
+/* Multiple-Bit Error */
+#define ECC_ERROR_DETECT_MBE (0x80000000 >> 28)
+/* Single-Bit ECC Error Pickup */
+#define ECC_ERROR_DETECT_SBE (0x80000000 >> 29)
+/* Memory Select Error */
+#define ECC_ERROR_DETECT_MSE (0x80000000 >> 31)
-/* ERR_DISABLE - Memory error disable
+/*
+ * ERR_DISABLE - Memory error disable
*/
-#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */
-#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */
-#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */
-#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED | ECC_ERROR_DISABLE_SBED |\
- ECC_ERROR_DISABLE_MBED)
-/* ERR_INT_EN - Memory error interrupt enable
+/* Multiple-Bit ECC Error Disable */
+#define ECC_ERROR_DISABLE_MBED (0x80000000 >> 28)
+/* Sinle-Bit ECC Error disable */
+#define ECC_ERROR_DISABLE_SBED (0x80000000 >> 29)
+/* Memory Select Error Disable */
+#define ECC_ERROR_DISABLE_MSED (0x80000000 >> 31)
+#define ECC_ERROR_ENABLE (~(ECC_ERROR_DISABLE_MSED | \
+ ECC_ERROR_DISABLE_SBED | \
+ ECC_ERROR_DISABLE_MBED))
+
+/*
+ * ERR_INT_EN - Memory error interrupt enable
*/
-#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */
-#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */
-#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */
-#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE | ECC_ERR_INT_EN_SBEE |\
- ECC_ERR_INT_EN_MSEE)
-/* CAPTURE_ATTRIBUTES - Memory error attributes capture
+/* Multiple-Bit ECC Error Interrupt Enable */
+#define ECC_ERR_INT_EN_MBEE (0x80000000 >> 28)
+/* Single-Bit ECC Error Interrupt Enable */
+#define ECC_ERR_INT_EN_SBEE (0x80000000 >> 29)
+/* Memory Select Error Interrupt Enable */
+#define ECC_ERR_INT_EN_MSEE (0x80000000 >> 31)
+#define ECC_ERR_INT_DISABLE (~(ECC_ERR_INT_EN_MBEE | \
+ ECC_ERR_INT_EN_SBEE | \
+ ECC_ERR_INT_EN_MSEE))
+
+/*
+ * CAPTURE_ATTRIBUTES - Memory error attributes capture
*/
-#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */
+/* Data Beat Num */
+#define ECC_CAPT_ATTR_BNUM (0xe0000000 >> 1)
#define ECC_CAPT_ATTR_BNUM_SHIFT 28
-#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */
+/* Transaction Size */
+#define ECC_CAPT_ATTR_TSIZ (0xc0000000 >> 6)
#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0
#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1
#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2
#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3
#define ECC_CAPT_ATTR_TSIZ_SHIFT 24
-#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */
+/* Transaction Source */
+#define ECC_CAPT_ATTR_TSRC (0xf8000000 >> 11)
#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0
#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2
#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4
#define ECC_CAPT_ATTR_TSRC_PCI2 0xE
#define ECC_CAPT_ATTR_TSRC_DMA 0xF
#define ECC_CAPT_ATTR_TSRC_SHIFT 16
-#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */
+/* Transaction Type */
+#define ECC_CAPT_ATTR_TTYP (0xe0000000 >> 18)
#define ECC_CAPT_ATTR_TTYP_WRITE 0x1
#define ECC_CAPT_ATTR_TTYP_READ 0x2
#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3
#define ECC_CAPT_ATTR_TTYP_SHIFT 12
-#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */
+#define ECC_CAPT_ATTR_VLD (0x80000000 >> 31) /* Valid */
-/* ERR_SBE - Single bit ECC memory error management
+/*
+ * ERR_SBE - Single bit ECC memory error management
*/
-#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */
+/* Single-Bit Error Threshold 0..255 */
+#define ECC_ERROR_MAN_SBET (0xff000000 >> 8)
#define ECC_ERROR_MAN_SBET_SHIFT 16
-#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */
+/* Single Bit Error Counter 0..255 */
+#define ECC_ERROR_MAN_SBEC (0xff000000 >> 24)
#define ECC_ERROR_MAN_SBEC_SHIFT 0
-/* CONFIG_ADDRESS - PCI Config Address Register
+/*
+ * CONFIG_ADDRESS - PCI Config Address Register
*/
#define PCI_CONFIG_ADDRESS_EN 0x80000000
#define PCI_CONFIG_ADDRESS_BN_SHIFT 16
#define PCI_CONFIG_ADDRESS_RN_SHIFT 0
#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc
-/* POTAR - PCI Outbound Translation Address Register
+/*
+ * POTAR - PCI Outbound Translation Address Register
*/
#define POTAR_TA_MASK 0x000fffff
-/* POBAR - PCI Outbound Base Address Register
+/*
+ * POBAR - PCI Outbound Base Address Register
*/
#define POBAR_BA_MASK 0x000fffff
-/* POCMR - PCI Outbound Comparision Mask Register
+/*
+ * POCMR - PCI Outbound Comparision Mask Register
*/
#define POCMR_EN 0x80000000
-#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */
+/* 0-memory space 1-I/O space */
+#define POCMR_IO 0x40000000
#define POCMR_SE 0x20000000 /* streaming enable */
#define POCMR_DST 0x10000000 /* 0-PCI1 1-PCI2 */
#define POCMR_CM_MASK 0x000fffff
#define POCMR_CM_8K 0x000FFFFE
#define POCMR_CM_4K 0x000FFFFF
-/* PITAR - PCI Inbound Translation Address Register
+/*
+ * PITAR - PCI Inbound Translation Address Register
*/
#define PITAR_TA_MASK 0x000fffff
-/* PIBAR - PCI Inbound Base/Extended Address Register
+/*
+ * PIBAR - PCI Inbound Base/Extended Address Register
*/
#define PIBAR_MASK 0xffffffff
#define PIEBAR_EBA_MASK 0x000fffff
-/* PIWAR - PCI Inbound Windows Attributes Register
+/*
+ * PIWAR - PCI Inbound Windows Attributes Register
*/
#define PIWAR_EN 0x80000000
#define PIWAR_PF 0x20000000
#define PIWAR_IWS_1G 0x0000001D
#define PIWAR_IWS_2G 0x0000001E
-/* PMCCR1 - PCI Configuration Register 1
+/*
+ * PMCCR1 - PCI Configuration Register 1
*/
#define PMCCR1_POWER_OFF 0x00000020
-/* DDRCDR - DDR Control Driver Register
+/*
+ * DDRCDR - DDR Control Driver Register
*/
#define DDRCDR_DHC_EN 0x80000000
#define DDRCDR_EN 0x40000000
#define DDRCDR_M_ODR 0x00000002
#define DDRCDR_Q_DRN 0x00000001
-/* PCIE Bridge Register
-*/
+/*
+ * PCIE Bridge Register
+ */
#define PEX_CSB_CTRL_OBPIOE 0x00000001
#define PEX_CSB_CTRL_IBPIOE 0x00000002
#define PEX_CSB_CTRL_WDMAE 0x00000004
projects / karo-tx-uboot.git / commitdiff