usb_dev[dev_index].devnum = -1;
}
+/*
+ * XHCI issues Enable Slot command and thereafter
+ * allocates device contexts. Provide a weak alias
+ * function for the purpose, so that XHCI overrides it
+ * and EHCI/OHCI just work out of the box.
+ */
+__weak int usb_alloc_device(struct usb_device *udev)
+{
+ return 0;
+}
/*
* By the time we get here, the device has gotten a new device ID
* and is in the default state. We need to identify the thing and
int tmp;
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
+ /*
+ * Allocate usb 3.0 device context.
+ * USB 3.0 (xHCI) protocol tries to allocate device slot
+ * and related data structures first. This call does that.
+ * Refer to sec 4.3.2 in xHCI spec rev1.0
+ */
+ if (usb_alloc_device(dev)) {
+ printf("Cannot allocate device context to get SLOT_ID\n");
+ return -1;
+ }
+
/* We still haven't set the Address yet */
addr = dev->devnum;
dev->devnum = 0;
* http://sourceforge.net/mailarchive/forum.php?
* thread_id=5729457&forum_id=5398
*/
- struct usb_device_descriptor *desc;
+ __maybe_unused struct usb_device_descriptor *desc;
int port = -1;
struct usb_device *parent = dev->parent;
unsigned short portstatus;
dev->epmaxpacketin[0] = 64;
dev->epmaxpacketout[0] = 64;
+ /*
+ * XHCI needs to issue a Address device command to setup
+ * proper device context structures, before it can interact
+ * with the device. So a get_descriptor will fail before any
+ * of that is done for XHCI unlike EHCI.
+ */
+#ifndef CONFIG_USB_XHCI
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
if (err < 0) {
debug("usb_new_device: usb_get_descriptor() failed\n");
* to differentiate between HUB and DEVICE.
*/
dev->descriptor.bDeviceClass = desc->bDeviceClass;
+#endif
- /* find the port number we're at */
if (parent) {
int j;
+ /* find the port number we're at */
for (j = 0; j < parent->maxchild; j++) {
if (parent->children[j] == dev) {
port = j;
COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
+# xhci
+COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
+
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--- /dev/null
+/*
+ * USB HOST XHCI Controller stack
+ *
+ * Based on xHCI host controller driver in linux-kernel
+ * by Sarah Sharp.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ * Author: Sarah Sharp
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors: Vivek Gautam <gautam.vivek@samsung.com>
+ * Vikas Sajjan <vikas.sajjan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <usb.h>
+#include <malloc.h>
+#include <asm/cache.h>
+#include <asm-generic/errno.h>
+
+#include "xhci.h"
+
+#define CACHELINE_SIZE CONFIG_SYS_CACHELINE_SIZE
+/**
+ * flushes the address passed till the length
+ *
+ * @param addr pointer to memory region to be flushed
+ * @param len the length of the cache line to be flushed
+ * @return none
+ */
+void xhci_flush_cache(uint32_t addr, u32 len)
+{
+ BUG_ON((void *)addr == NULL || len == 0);
+
+ flush_dcache_range(addr & ~(CACHELINE_SIZE - 1),
+ ALIGN(addr + len, CACHELINE_SIZE));
+}
+
+/**
+ * invalidates the address passed till the length
+ *
+ * @param addr pointer to memory region to be invalidates
+ * @param len the length of the cache line to be invalidated
+ * @return none
+ */
+void xhci_inval_cache(uint32_t addr, u32 len)
+{
+ BUG_ON((void *)addr == NULL || len == 0);
+
+ invalidate_dcache_range(addr & ~(CACHELINE_SIZE - 1),
+ ALIGN(addr + len, CACHELINE_SIZE));
+}
+
+
+/**
+ * frees the "segment" pointer passed
+ *
+ * @param ptr pointer to "segement" to be freed
+ * @return none
+ */
+static void xhci_segment_free(struct xhci_segment *seg)
+{
+ free(seg->trbs);
+ seg->trbs = NULL;
+
+ free(seg);
+}
+
+/**
+ * frees the "ring" pointer passed
+ *
+ * @param ptr pointer to "ring" to be freed
+ * @return none
+ */
+static void xhci_ring_free(struct xhci_ring *ring)
+{
+ struct xhci_segment *seg;
+ struct xhci_segment *first_seg;
+
+ BUG_ON(!ring);
+
+ first_seg = ring->first_seg;
+ seg = first_seg->next;
+ while (seg != first_seg) {
+ struct xhci_segment *next = seg->next;
+ xhci_segment_free(seg);
+ seg = next;
+ }
+ xhci_segment_free(first_seg);
+
+ free(ring);
+}
+
+/**
+ * frees the "xhci_container_ctx" pointer passed
+ *
+ * @param ptr pointer to "xhci_container_ctx" to be freed
+ * @return none
+ */
+static void xhci_free_container_ctx(struct xhci_container_ctx *ctx)
+{
+ free(ctx->bytes);
+ free(ctx);
+}
+
+/**
+ * frees the virtual devices for "xhci_ctrl" pointer passed
+ *
+ * @param ptr pointer to "xhci_ctrl" whose virtual devices are to be freed
+ * @return none
+ */
+static void xhci_free_virt_devices(struct xhci_ctrl *ctrl)
+{
+ int i;
+ int slot_id;
+ struct xhci_virt_device *virt_dev;
+
+ /*
+ * refactored here to loop through all virt_dev
+ * Slot ID 0 is reserved
+ */
+ for (slot_id = 0; slot_id < MAX_HC_SLOTS; slot_id++) {
+ virt_dev = ctrl->devs[slot_id];
+ if (!virt_dev)
+ continue;
+
+ ctrl->dcbaa->dev_context_ptrs[slot_id] = 0;
+
+ for (i = 0; i < 31; ++i)
+ if (virt_dev->eps[i].ring)
+ xhci_ring_free(virt_dev->eps[i].ring);
+
+ if (virt_dev->in_ctx)
+ xhci_free_container_ctx(virt_dev->in_ctx);
+ if (virt_dev->out_ctx)
+ xhci_free_container_ctx(virt_dev->out_ctx);
+
+ free(virt_dev);
+ /* make sure we are pointing to NULL */
+ ctrl->devs[slot_id] = NULL;
+ }
+}
+
+/**
+ * frees all the memory allocated
+ *
+ * @param ptr pointer to "xhci_ctrl" to be cleaned up
+ * @return none
+ */
+void xhci_cleanup(struct xhci_ctrl *ctrl)
+{
+ xhci_ring_free(ctrl->event_ring);
+ xhci_ring_free(ctrl->cmd_ring);
+ xhci_free_virt_devices(ctrl);
+ free(ctrl->erst.entries);
+ free(ctrl->dcbaa);
+ memset(ctrl, '\0', sizeof(struct xhci_ctrl));
+}
+
+/**
+ * Malloc the aligned memory
+ *
+ * @param size size of memory to be allocated
+ * @return allocates the memory and returns the aligned pointer
+ */
+static void *xhci_malloc(unsigned int size)
+{
+ void *ptr;
+ size_t cacheline_size = max(XHCI_ALIGNMENT, CACHELINE_SIZE);
+
+ ptr = memalign(cacheline_size, ALIGN(size, cacheline_size));
+ BUG_ON(!ptr);
+ memset(ptr, '\0', size);
+
+ xhci_flush_cache((uint32_t)ptr, size);
+
+ return ptr;
+}
+
+/**
+ * Make the prev segment point to the next segment.
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * address of the next segment. The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ *
+ * @param prev pointer to the previous segment
+ * @param next pointer to the next segment
+ * @param link_trbs flag to indicate whether to link the trbs or NOT
+ * @return none
+ */
+static void xhci_link_segments(struct xhci_segment *prev,
+ struct xhci_segment *next, bool link_trbs)
+{
+ u32 val;
+ u64 val_64 = 0;
+
+ if (!prev || !next)
+ return;
+ prev->next = next;
+ if (link_trbs) {
+ val_64 = (uintptr_t)next->trbs;
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = val_64;
+
+ /*
+ * Set the last TRB in the segment to
+ * have a TRB type ID of Link TRB
+ */
+ val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
+ val &= ~TRB_TYPE_BITMASK;
+ val |= (TRB_LINK << TRB_TYPE_SHIFT);
+
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
+ }
+}
+
+/**
+ * Initialises the Ring's enqueue,dequeue,enq_seg pointers
+ *
+ * @param ring pointer to the RING to be intialised
+ * @return none
+ */
+static void xhci_initialize_ring_info(struct xhci_ring *ring)
+{
+ /*
+ * The ring is empty, so the enqueue pointer == dequeue pointer
+ */
+ ring->enqueue = ring->first_seg->trbs;
+ ring->enq_seg = ring->first_seg;
+ ring->dequeue = ring->enqueue;
+ ring->deq_seg = ring->first_seg;
+
+ /*
+ * The ring is initialized to 0. The producer must write 1 to the
+ * cycle bit to handover ownership of the TRB, so PCS = 1.
+ * The consumer must compare CCS to the cycle bit to
+ * check ownership, so CCS = 1.
+ */
+ ring->cycle_state = 1;
+}
+
+/**
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ * Section 4.11.1.1:
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ *
+ * @param none
+ * @return pointer to the newly allocated SEGMENT
+ */
+static struct xhci_segment *xhci_segment_alloc(void)
+{
+ struct xhci_segment *seg;
+
+ seg = (struct xhci_segment *)malloc(sizeof(struct xhci_segment));
+ BUG_ON(!seg);
+
+ seg->trbs = (union xhci_trb *)xhci_malloc(SEGMENT_SIZE);
+
+ seg->next = NULL;
+
+ return seg;
+}
+
+/**
+ * Create a new ring with zero or more segments.
+ * TODO: current code only uses one-time-allocated single-segment rings
+ * of 1KB anyway, so we might as well get rid of all the segment and
+ * linking code (and maybe increase the size a bit, e.g. 4KB).
+ *
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ * See section 4.9.2 and figures 15 and 16 of XHCI spec rev1.0.
+ *
+ * @param num_segs number of segments in the ring
+ * @param link_trbs flag to indicate whether to link the trbs or NOT
+ * @return pointer to the newly created RING
+ */
+struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *prev;
+
+ ring = (struct xhci_ring *)malloc(sizeof(struct xhci_ring));
+ BUG_ON(!ring);
+
+ if (num_segs == 0)
+ return ring;
+
+ ring->first_seg = xhci_segment_alloc();
+ BUG_ON(!ring->first_seg);
+
+ num_segs--;
+
+ prev = ring->first_seg;
+ while (num_segs > 0) {
+ struct xhci_segment *next;
+
+ next = xhci_segment_alloc();
+ BUG_ON(!next);
+
+ xhci_link_segments(prev, next, link_trbs);
+
+ prev = next;
+ num_segs--;
+ }
+ xhci_link_segments(prev, ring->first_seg, link_trbs);
+ if (link_trbs) {
+ /* See section 4.9.2.1 and 6.4.4.1 */
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control |=
+ cpu_to_le32(LINK_TOGGLE);
+ }
+ xhci_initialize_ring_info(ring);
+
+ return ring;
+}
+
+/**
+ * Allocates the Container context
+ *
+ * @param ctrl Host controller data structure
+ * @param type type of XHCI Container Context
+ * @return NULL if failed else pointer to the context on success
+ */
+static struct xhci_container_ctx
+ *xhci_alloc_container_ctx(struct xhci_ctrl *ctrl, int type)
+{
+ struct xhci_container_ctx *ctx;
+
+ ctx = (struct xhci_container_ctx *)
+ malloc(sizeof(struct xhci_container_ctx));
+ BUG_ON(!ctx);
+
+ BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+ ctx->type = type;
+ ctx->size = (MAX_EP_CTX_NUM + 1) *
+ CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
+ if (type == XHCI_CTX_TYPE_INPUT)
+ ctx->size += CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
+
+ ctx->bytes = (u8 *)xhci_malloc(ctx->size);
+
+ return ctx;
+}
+
+/**
+ * Allocating virtual device
+ *
+ * @param udev pointer to USB deivce structure
+ * @return 0 on success else -1 on failure
+ */
+int xhci_alloc_virt_device(struct usb_device *udev)
+{
+ u64 byte_64 = 0;
+ unsigned int slot_id = udev->slot_id;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ctrl *ctrl = udev->controller;
+
+ /* Slot ID 0 is reserved */
+ if (ctrl->devs[slot_id]) {
+ printf("Virt dev for slot[%d] already allocated\n", slot_id);
+ return -EEXIST;
+ }
+
+ ctrl->devs[slot_id] = (struct xhci_virt_device *)
+ malloc(sizeof(struct xhci_virt_device));
+
+ if (!ctrl->devs[slot_id]) {
+ puts("Failed to allocate virtual device\n");
+ return -ENOMEM;
+ }
+
+ memset(ctrl->devs[slot_id], 0, sizeof(struct xhci_virt_device));
+ virt_dev = ctrl->devs[slot_id];
+
+ /* Allocate the (output) device context that will be used in the HC. */
+ virt_dev->out_ctx = xhci_alloc_container_ctx(ctrl,
+ XHCI_CTX_TYPE_DEVICE);
+ if (!virt_dev->out_ctx) {
+ puts("Failed to allocate out context for virt dev\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate the (input) device context for address device command */
+ virt_dev->in_ctx = xhci_alloc_container_ctx(ctrl,
+ XHCI_CTX_TYPE_INPUT);
+ if (!virt_dev->in_ctx) {
+ puts("Failed to allocate in context for virt dev\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate endpoint 0 ring */
+ virt_dev->eps[0].ring = xhci_ring_alloc(1, true);
+
+ byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes);
+
+ /* Point to output device context in dcbaa. */
+ ctrl->dcbaa->dev_context_ptrs[slot_id] = byte_64;
+
+ xhci_flush_cache((uint32_t)&ctrl->dcbaa->dev_context_ptrs[slot_id],
+ sizeof(__le64));
+ return 0;
+}
+
+/**
+ * Allocates the necessary data structures
+ * for XHCI host controller
+ *
+ * @param ctrl Host controller data structure
+ * @param hccr pointer to HOST Controller Control Registers
+ * @param hcor pointer to HOST Controller Operational Registers
+ * @return 0 if successful else -1 on failure
+ */
+int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
+ struct xhci_hcor *hcor)
+{
+ uint64_t val_64;
+ uint64_t trb_64;
+ uint32_t val;
+ unsigned long deq;
+ int i;
+ struct xhci_segment *seg;
+
+ /* DCBAA initialization */
+ ctrl->dcbaa = (struct xhci_device_context_array *)
+ xhci_malloc(sizeof(struct xhci_device_context_array));
+ if (ctrl->dcbaa == NULL) {
+ puts("unable to allocate DCBA\n");
+ return -ENOMEM;
+ }
+
+ val_64 = (uintptr_t)ctrl->dcbaa;
+ /* Set the pointer in DCBAA register */
+ xhci_writeq(&hcor->or_dcbaap, val_64);
+
+ /* Command ring control pointer register initialization */
+ ctrl->cmd_ring = xhci_ring_alloc(1, true);
+
+ /* Set the address in the Command Ring Control register */
+ trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs;
+ val_64 = xhci_readq(&hcor->or_crcr);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (trb_64 & (u64) ~CMD_RING_RSVD_BITS) |
+ ctrl->cmd_ring->cycle_state;
+ xhci_writeq(&hcor->or_crcr, val_64);
+
+ /* write the address of db register */
+ val = xhci_readl(&hccr->cr_dboff);
+ val &= DBOFF_MASK;
+ ctrl->dba = (struct xhci_doorbell_array *)((char *)hccr + val);
+
+ /* write the address of runtime register */
+ val = xhci_readl(&hccr->cr_rtsoff);
+ val &= RTSOFF_MASK;
+ ctrl->run_regs = (struct xhci_run_regs *)((char *)hccr + val);
+
+ /* writting the address of ir_set structure */
+ ctrl->ir_set = &ctrl->run_regs->ir_set[0];
+
+ /* Event ring does not maintain link TRB */
+ ctrl->event_ring = xhci_ring_alloc(ERST_NUM_SEGS, false);
+ ctrl->erst.entries = (struct xhci_erst_entry *)
+ xhci_malloc(sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS);
+
+ ctrl->erst.num_entries = ERST_NUM_SEGS;
+
+ for (val = 0, seg = ctrl->event_ring->first_seg;
+ val < ERST_NUM_SEGS;
+ val++) {
+ trb_64 = 0;
+ trb_64 = (uintptr_t)seg->trbs;
+ struct xhci_erst_entry *entry = &ctrl->erst.entries[val];
+ xhci_writeq(&entry->seg_addr, trb_64);
+ entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
+ entry->rsvd = 0;
+ seg = seg->next;
+ }
+ xhci_flush_cache((uint32_t)ctrl->erst.entries,
+ ERST_NUM_SEGS * sizeof(struct xhci_erst_entry));
+
+ deq = (unsigned long)ctrl->event_ring->dequeue;
+
+ /* Update HC event ring dequeue pointer */
+ xhci_writeq(&ctrl->ir_set->erst_dequeue,
+ (u64)deq & (u64)~ERST_PTR_MASK);
+
+ /* set ERST count with the number of entries in the segment table */
+ val = xhci_readl(&ctrl->ir_set->erst_size);
+ val &= ERST_SIZE_MASK;
+ val |= ERST_NUM_SEGS;
+ xhci_writel(&ctrl->ir_set->erst_size, val);
+
+ /* this is the event ring segment table pointer */
+ val_64 = xhci_readq(&ctrl->ir_set->erst_base);
+ val_64 &= ERST_PTR_MASK;
+ val_64 |= ((u32)(ctrl->erst.entries) & ~ERST_PTR_MASK);
+
+ xhci_writeq(&ctrl->ir_set->erst_base, val_64);
+
+ /* initializing the virtual devices to NULL */
+ for (i = 0; i < MAX_HC_SLOTS; ++i)
+ ctrl->devs[i] = NULL;
+
+ /*
+ * Just Zero'ing this register completely,
+ * or some spurious Device Notification Events
+ * might screw things here.
+ */
+ xhci_writel(&hcor->or_dnctrl, 0x0);
+
+ return 0;
+}
+
+/**
+ * Give the input control context for the passed container context
+ *
+ * @param ctx pointer to the context
+ * @return pointer to the Input control context data
+ */
+struct xhci_input_control_ctx
+ *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx)
+{
+ BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+ return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+/**
+ * Give the slot context for the passed container context
+ *
+ * @param ctrl Host controller data structure
+ * @param ctx pointer to the context
+ * @return pointer to the slot control context data
+ */
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *ctx)
+{
+ if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+ return (struct xhci_slot_ctx *)ctx->bytes;
+
+ return (struct xhci_slot_ctx *)
+ (ctx->bytes + CTX_SIZE(readl(&ctrl->hccr->cr_hccparams)));
+}
+
+/**
+ * Gets the EP context from based on the ep_index
+ *
+ * @param ctrl Host controller data structure
+ * @param ctx context container
+ * @param ep_index index of the endpoint
+ * @return pointer to the End point context
+ */
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *ctx,
+ unsigned int ep_index)
+{
+ /* increment ep index by offset of start of ep ctx array */
+ ep_index++;
+ if (ctx->type == XHCI_CTX_TYPE_INPUT)
+ ep_index++;
+
+ return (struct xhci_ep_ctx *)
+ (ctx->bytes +
+ (ep_index * CTX_SIZE(readl(&ctrl->hccr->cr_hccparams))));
+}
+
+/**
+ * Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint
+ * and then issue a configure endpoint command.
+ *
+ * @param ctrl Host controller data structure
+ * @param in_ctx contains the input context
+ * @param out_ctx contains the input context
+ * @param ep_index index of the end point
+ * @return none
+ */
+void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx,
+ unsigned int ep_index)
+{
+ struct xhci_ep_ctx *out_ep_ctx;
+ struct xhci_ep_ctx *in_ep_ctx;
+
+ out_ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
+ in_ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
+
+ in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+ in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+ in_ep_ctx->deq = out_ep_ctx->deq;
+ in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+}
+
+/**
+ * Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint
+ * and then issue a configure endpoint command.
+ * Only the context entries field matters, but
+ * we'll copy the whole thing anyway.
+ *
+ * @param ctrl Host controller data structure
+ * @param in_ctx contains the inpout context
+ * @param out_ctx contains the inpout context
+ * @return none
+ */
+void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx)
+{
+ struct xhci_slot_ctx *in_slot_ctx;
+ struct xhci_slot_ctx *out_slot_ctx;
+
+ in_slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
+ out_slot_ctx = xhci_get_slot_ctx(ctrl, out_ctx);
+
+ in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+ in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+ in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+ in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
+/**
+ * Setup an xHCI virtual device for a Set Address command
+ *
+ * @param udev pointer to the Device Data Structure
+ * @return returns negative value on failure else 0 on success
+ */
+void xhci_setup_addressable_virt_dev(struct usb_device *udev)
+{
+ struct usb_device *hop = udev;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ u32 port_num = 0;
+ u64 trb_64 = 0;
+ struct xhci_ctrl *ctrl = udev->controller;
+
+ virt_dev = ctrl->devs[udev->slot_id];
+
+ BUG_ON(!virt_dev);
+
+ /* Extract the EP0 and Slot Ctrl */
+ ep0_ctx = xhci_get_ep_ctx(ctrl, virt_dev->in_ctx, 0);
+ slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->in_ctx);
+
+ /* Only the control endpoint is valid - one endpoint context */
+ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0);
+
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
+ break;
+ case USB_SPEED_HIGH:
+ slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
+ break;
+ case USB_SPEED_FULL:
+ slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
+ break;
+ case USB_SPEED_LOW:
+ slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
+ break;
+ default:
+ /* Speed was set earlier, this shouldn't happen. */
+ BUG();
+ }
+
+ /* Extract the root hub port number */
+ if (hop->parent)
+ while (hop->parent->parent)
+ hop = hop->parent;
+ port_num = hop->portnr;
+ debug("port_num = %d\n", port_num);
+
+ slot_ctx->dev_info2 |=
+ cpu_to_le32(((port_num & ROOT_HUB_PORT_MASK) <<
+ ROOT_HUB_PORT_SHIFT));
+
+ /* Step 4 - ring already allocated */
+ /* Step 5 */
+ ep0_ctx->ep_info2 = cpu_to_le32(CTRL_EP << EP_TYPE_SHIFT);
+ debug("SPEED = %d\n", udev->speed);
+
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ ep0_ctx->ep_info2 |= cpu_to_le32(((512 & MAX_PACKET_MASK) <<
+ MAX_PACKET_SHIFT));
+ debug("Setting Packet size = 512bytes\n");
+ break;
+ case USB_SPEED_HIGH:
+ /* USB core guesses at a 64-byte max packet first for FS devices */
+ case USB_SPEED_FULL:
+ ep0_ctx->ep_info2 |= cpu_to_le32(((64 & MAX_PACKET_MASK) <<
+ MAX_PACKET_SHIFT));
+ debug("Setting Packet size = 64bytes\n");
+ break;
+ case USB_SPEED_LOW:
+ ep0_ctx->ep_info2 |= cpu_to_le32(((8 & MAX_PACKET_MASK) <<
+ MAX_PACKET_SHIFT));
+ debug("Setting Packet size = 8bytes\n");
+ break;
+ default:
+ /* New speed? */
+ BUG();
+ }
+
+ /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+ ep0_ctx->ep_info2 |=
+ cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
+ ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
+
+ trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs;
+ ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state);
+
+ /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+ xhci_flush_cache((uint32_t)ep0_ctx, sizeof(struct xhci_ep_ctx));
+ xhci_flush_cache((uint32_t)slot_ctx, sizeof(struct xhci_slot_ctx));
+}
--- /dev/null
+/*
+ * USB HOST XHCI Controller stack
+ *
+ * Based on xHCI host controller driver in linux-kernel
+ * by Sarah Sharp.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ * Author: Sarah Sharp
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors: Vivek Gautam <gautam.vivek@samsung.com>
+ * Vikas Sajjan <vikas.sajjan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <usb.h>
+#include <asm/unaligned.h>
+#include <asm-generic/errno.h>
+
+#include "xhci.h"
+
+/**
+ * Is this TRB a link TRB or was the last TRB the last TRB in this event ring
+ * segment? I.e. would the updated event TRB pointer step off the end of the
+ * event seg ?
+ *
+ * @param ctrl Host controller data structure
+ * @param ring pointer to the ring
+ * @param seg poniter to the segment to which TRB belongs
+ * @param trb poniter to the ring trb
+ * @return 1 if this TRB a link TRB else 0
+ */
+static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
+ struct xhci_segment *seg, union xhci_trb *trb)
+{
+ if (ring == ctrl->event_ring)
+ return trb == &seg->trbs[TRBS_PER_SEGMENT];
+ else
+ return TRB_TYPE_LINK_LE32(trb->link.control);
+}
+
+/**
+ * Does this link TRB point to the first segment in a ring,
+ * or was the previous TRB the last TRB on the last segment in the ERST?
+ *
+ * @param ctrl Host controller data structure
+ * @param ring pointer to the ring
+ * @param seg poniter to the segment to which TRB belongs
+ * @param trb poniter to the ring trb
+ * @return 1 if this TRB is the last TRB on the last segment else 0
+ */
+static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl,
+ struct xhci_ring *ring,
+ struct xhci_segment *seg,
+ union xhci_trb *trb)
+{
+ if (ring == ctrl->event_ring)
+ return ((trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
+ (seg->next == ring->first_seg));
+ else
+ return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
+}
+
+/**
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
+ * set, but other sections talk about dealing with the chain bit set. This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @param ctrl Host controller data structure
+ * @param ring pointer to the ring
+ * @param more_trbs_coming flag to indicate whether more trbs
+ * are expected or NOT.
+ * Will you enqueue more TRBs before calling
+ * prepare_ring()?
+ * @return none
+ */
+static void inc_enq(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
+ bool more_trbs_coming)
+{
+ u32 chain;
+ union xhci_trb *next;
+
+ chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
+ next = ++(ring->enqueue);
+
+ /*
+ * Update the dequeue pointer further if that was a link TRB or we're at
+ * the end of an event ring segment (which doesn't have link TRBS)
+ */
+ while (last_trb(ctrl, ring, ring->enq_seg, next)) {
+ if (ring != ctrl->event_ring) {
+ /*
+ * If the caller doesn't plan on enqueueing more
+ * TDs before ringing the doorbell, then we
+ * don't want to give the link TRB to the
+ * hardware just yet. We'll give the link TRB
+ * back in prepare_ring() just before we enqueue
+ * the TD at the top of the ring.
+ */
+ if (!chain && !more_trbs_coming)
+ break;
+
+ /*
+ * If we're not dealing with 0.95 hardware or
+ * isoc rings on AMD 0.96 host,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+ next->link.control |= cpu_to_le32(chain);
+
+ next->link.control ^= cpu_to_le32(TRB_CYCLE);
+ xhci_flush_cache((uint32_t)next,
+ sizeof(union xhci_trb));
+ }
+ /* Toggle the cycle bit after the last ring segment. */
+ if (last_trb_on_last_seg(ctrl, ring,
+ ring->enq_seg, next))
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+
+ ring->enq_seg = ring->enq_seg->next;
+ ring->enqueue = ring->enq_seg->trbs;
+ next = ring->enqueue;
+ }
+}
+
+/**
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * @param ctrl Host controller data structure
+ * @param ring Ring whose Dequeue TRB pointer needs to be incremented.
+ * return none
+ */
+static void inc_deq(struct xhci_ctrl *ctrl, struct xhci_ring *ring)
+{
+ do {
+ /*
+ * Update the dequeue pointer further if that was a link TRB or
+ * we're at the end of an event ring segment (which doesn't have
+ * link TRBS)
+ */
+ if (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue)) {
+ if (ring == ctrl->event_ring &&
+ last_trb_on_last_seg(ctrl, ring,
+ ring->deq_seg, ring->dequeue)) {
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+ }
+ ring->deq_seg = ring->deq_seg->next;
+ ring->dequeue = ring->deq_seg->trbs;
+ } else {
+ ring->dequeue++;
+ }
+ } while (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue));
+}
+
+/**
+ * Generic function for queueing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ *
+ * @param more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_ring()?
+ * @param ctrl Host controller data structure
+ * @param ring pointer to the ring
+ * @param more_trbs_coming flag to indicate whether more trbs
+ * @param trb_fields pointer to trb field array containing TRB contents
+ * @return pointer to the enqueued trb
+ */
+static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl,
+ struct xhci_ring *ring,
+ bool more_trbs_coming,
+ unsigned int *trb_fields)
+{
+ struct xhci_generic_trb *trb;
+ int i;
+
+ trb = &ring->enqueue->generic;
+
+ for (i = 0; i < 4; i++)
+ trb->field[i] = cpu_to_le32(trb_fields[i]);
+
+ xhci_flush_cache((uint32_t)trb, sizeof(struct xhci_generic_trb));
+
+ inc_enq(ctrl, ring, more_trbs_coming);
+
+ return trb;
+}
+
+/**
+ * Does various checks on the endpoint ring, and makes it ready
+ * to queue num_trbs.
+ *
+ * @param ctrl Host controller data structure
+ * @param ep_ring pointer to the EP Transfer Ring
+ * @param ep_state State of the End Point
+ * @return error code in case of invalid ep_state, 0 on success
+ */
+static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring,
+ u32 ep_state)
+{
+ union xhci_trb *next = ep_ring->enqueue;
+
+ /* Make sure the endpoint has been added to xHC schedule */
+ switch (ep_state) {
+ case EP_STATE_DISABLED:
+ /*
+ * USB core changed config/interfaces without notifying us,
+ * or hardware is reporting the wrong state.
+ */
+ puts("WARN urb submitted to disabled ep\n");
+ return -ENOENT;
+ case EP_STATE_ERROR:
+ puts("WARN waiting for error on ep to be cleared\n");
+ return -EINVAL;
+ case EP_STATE_HALTED:
+ puts("WARN halted endpoint, queueing URB anyway.\n");
+ case EP_STATE_STOPPED:
+ case EP_STATE_RUNNING:
+ debug("EP STATE RUNNING.\n");
+ break;
+ default:
+ puts("ERROR unknown endpoint state for ep\n");
+ return -EINVAL;
+ }
+
+ while (last_trb(ctrl, ep_ring, ep_ring->enq_seg, next)) {
+ /*
+ * If we're not dealing with 0.95 hardware or isoc rings
+ * on AMD 0.96 host, clear the chain bit.
+ */
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+
+ next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+ xhci_flush_cache((uint32_t)next, sizeof(union xhci_trb));
+
+ /* Toggle the cycle bit after the last ring segment. */
+ if (last_trb_on_last_seg(ctrl, ep_ring,
+ ep_ring->enq_seg, next))
+ ep_ring->cycle_state = (ep_ring->cycle_state ? 0 : 1);
+ ep_ring->enq_seg = ep_ring->enq_seg->next;
+ ep_ring->enqueue = ep_ring->enq_seg->trbs;
+ next = ep_ring->enqueue;
+ }
+
+ return 0;
+}
+
+/**
+ * Generic function for queueing a command TRB on the command ring.
+ * Check to make sure there's room on the command ring for one command TRB.
+ *
+ * @param ctrl Host controller data structure
+ * @param ptr Pointer address to write in the first two fields (opt.)
+ * @param slot_id Slot ID to encode in the flags field (opt.)
+ * @param ep_index Endpoint index to encode in the flags field (opt.)
+ * @param cmd Command type to enqueue
+ * @return none
+ */
+void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id,
+ u32 ep_index, trb_type cmd)
+{
+ u32 fields[4];
+ u64 val_64 = (uintptr_t)ptr;
+
+ BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING));
+
+ fields[0] = lower_32_bits(val_64);
+ fields[1] = upper_32_bits(val_64);
+ fields[2] = 0;
+ fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) |
+ SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state;
+
+ queue_trb(ctrl, ctrl->cmd_ring, false, fields);
+
+ /* Ring the command ring doorbell */
+ xhci_writel(&ctrl->dba->doorbell[0], DB_VALUE_HOST);
+}
+
+/**
+ * The TD size is the number of bytes remaining in the TD (including this TRB),
+ * right shifted by 10.
+ * It must fit in bits 21:17, so it can't be bigger than 31.
+ *
+ * @param remainder remaining packets to be sent
+ * @return remainder if remainder is less than max else max
+ */
+static u32 xhci_td_remainder(unsigned int remainder)
+{
+ u32 max = (1 << (21 - 17 + 1)) - 1;
+
+ if ((remainder >> 10) >= max)
+ return max << 17;
+ else
+ return (remainder >> 10) << 17;
+}
+
+/**
+ * Finds out the remanining packets to be sent
+ *
+ * @param running_total total size sent so far
+ * @param trb_buff_len length of the TRB Buffer
+ * @param total_packet_count total packet count
+ * @param maxpacketsize max packet size of current pipe
+ * @param num_trbs_left number of TRBs left to be processed
+ * @return 0 if running_total or trb_buff_len is 0, else remainder
+ */
+static u32 xhci_v1_0_td_remainder(int running_total,
+ int trb_buff_len,
+ unsigned int total_packet_count,
+ int maxpacketsize,
+ unsigned int num_trbs_left)
+{
+ int packets_transferred;
+
+ /* One TRB with a zero-length data packet. */
+ if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
+ return 0;
+
+ /*
+ * All the TRB queueing functions don't count the current TRB in
+ * running_total.
+ */
+ packets_transferred = (running_total + trb_buff_len) / maxpacketsize;
+
+ if ((total_packet_count - packets_transferred) > 31)
+ return 31 << 17;
+ return (total_packet_count - packets_transferred) << 17;
+}
+
+/**
+ * Ring the doorbell of the End Point
+ *
+ * @param udev pointer to the USB device structure
+ * @param ep_index index of the endpoint
+ * @param start_cycle cycle flag of the first TRB
+ * @param start_trb pionter to the first TRB
+ * @return none
+ */
+static void giveback_first_trb(struct usb_device *udev, int ep_index,
+ int start_cycle,
+ struct xhci_generic_trb *start_trb)
+{
+ struct xhci_ctrl *ctrl = udev->controller;
+
+ /*
+ * Pass all the TRBs to the hardware at once and make sure this write
+ * isn't reordered.
+ */
+ if (start_cycle)
+ start_trb->field[3] |= cpu_to_le32(start_cycle);
+ else
+ start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+ xhci_flush_cache((uint32_t)start_trb, sizeof(struct xhci_generic_trb));
+
+ /* Ringing EP doorbell here */
+ xhci_writel(&ctrl->dba->doorbell[udev->slot_id],
+ DB_VALUE(ep_index, 0));
+
+ return;
+}
+
+/**** POLLING mechanism for XHCI ****/
+
+/**
+ * Finalizes a handled event TRB by advancing our dequeue pointer and giving
+ * the TRB back to the hardware for recycling. Must call this exactly once at
+ * the end of each event handler, and not touch the TRB again afterwards.
+ *
+ * @param ctrl Host controller data structure
+ * @return none
+ */
+void xhci_acknowledge_event(struct xhci_ctrl *ctrl)
+{
+ /* Advance our dequeue pointer to the next event */
+ inc_deq(ctrl, ctrl->event_ring);
+
+ /* Inform the hardware */
+ xhci_writeq(&ctrl->ir_set->erst_dequeue,
+ (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB);
+}
+
+/**
+ * Checks if there is a new event to handle on the event ring.
+ *
+ * @param ctrl Host controller data structure
+ * @return 0 if failure else 1 on success
+ */
+static int event_ready(struct xhci_ctrl *ctrl)
+{
+ union xhci_trb *event;
+
+ xhci_inval_cache((uint32_t)ctrl->event_ring->dequeue,
+ sizeof(union xhci_trb));
+
+ event = ctrl->event_ring->dequeue;
+
+ /* Does the HC or OS own the TRB? */
+ if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
+ ctrl->event_ring->cycle_state)
+ return 0;
+
+ return 1;
+}
+
+/**
+ * Waits for a specific type of event and returns it. Discards unexpected
+ * events. Caller *must* call xhci_acknowledge_event() after it is finished
+ * processing the event, and must not access the returned pointer afterwards.
+ *
+ * @param ctrl Host controller data structure
+ * @param expected TRB type expected from Event TRB
+ * @return pointer to event trb
+ */
+union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
+{
+ trb_type type;
+ unsigned long ts = get_timer(0);
+
+ do {
+ union xhci_trb *event = ctrl->event_ring->dequeue;
+
+ if (!event_ready(ctrl))
+ continue;
+
+ type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
+ if (type == expected)
+ return event;
+
+ if (type == TRB_PORT_STATUS)
+ /* TODO: remove this once enumeration has been reworked */
+ /*
+ * Port status change events always have a
+ * successful completion code
+ */
+ BUG_ON(GET_COMP_CODE(
+ le32_to_cpu(event->generic.field[2])) !=
+ COMP_SUCCESS);
+ else
+ printf("Unexpected XHCI event TRB, skipping... "
+ "(%08x %08x %08x %08x)\n",
+ le32_to_cpu(event->generic.field[0]),
+ le32_to_cpu(event->generic.field[1]),
+ le32_to_cpu(event->generic.field[2]),
+ le32_to_cpu(event->generic.field[3]));
+
+ xhci_acknowledge_event(ctrl);
+ } while (get_timer(ts) < XHCI_TIMEOUT);
+
+ if (expected == TRB_TRANSFER)
+ return NULL;
+
+ printf("XHCI timeout on event type %d... cannot recover.\n", expected);
+ BUG();
+}
+
+/*
+ * Stops transfer processing for an endpoint and throws away all unprocessed
+ * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
+ * xhci_bulk_tx/xhci_ctrl_tx on this enpoint will add new transfers there and
+ * ring the doorbell, causing this endpoint to start working again.
+ * (Careful: This will BUG() when there was no transfer in progress. Shouldn't
+ * happen in practice for current uses and is too complicated to fix right now.)
+ */
+static void abort_td(struct usb_device *udev, int ep_index)
+{
+ struct xhci_ctrl *ctrl = udev->controller;
+ struct xhci_ring *ring = ctrl->devs[udev->slot_id]->eps[ep_index].ring;
+ union xhci_trb *event;
+ u32 field;
+
+ xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_STOP_RING);
+
+ event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
+ field = le32_to_cpu(event->trans_event.flags);
+ BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
+ BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
+ BUG_ON(GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len
+ != COMP_STOP)));
+ xhci_acknowledge_event(ctrl);
+
+ event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
+ BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
+ != udev->slot_id || GET_COMP_CODE(le32_to_cpu(
+ event->event_cmd.status)) != COMP_SUCCESS);
+ xhci_acknowledge_event(ctrl);
+
+ xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
+ ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
+ event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
+ BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
+ != udev->slot_id || GET_COMP_CODE(le32_to_cpu(
+ event->event_cmd.status)) != COMP_SUCCESS);
+ xhci_acknowledge_event(ctrl);
+}
+
+static void record_transfer_result(struct usb_device *udev,
+ union xhci_trb *event, int length)
+{
+ udev->act_len = min(length, length -
+ EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
+
+ switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
+ case COMP_SUCCESS:
+ BUG_ON(udev->act_len != length);
+ /* fallthrough */
+ case COMP_SHORT_TX:
+ udev->status = 0;
+ break;
+ case COMP_STALL:
+ udev->status = USB_ST_STALLED;
+ break;
+ case COMP_DB_ERR:
+ case COMP_TRB_ERR:
+ udev->status = USB_ST_BUF_ERR;
+ break;
+ case COMP_BABBLE:
+ udev->status = USB_ST_BABBLE_DET;
+ break;
+ default:
+ udev->status = 0x80; /* USB_ST_TOO_LAZY_TO_MAKE_A_NEW_MACRO */
+ }
+}
+
+/**** Bulk and Control transfer methods ****/
+/**
+ * Queues up the BULK Request
+ *
+ * @param udev pointer to the USB device structure
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param length length of the buffer
+ * @param buffer buffer to be read/written based on the request
+ * @return returns 0 if successful else -1 on failure
+ */
+int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
+ int length, void *buffer)
+{
+ int num_trbs = 0;
+ struct xhci_generic_trb *start_trb;
+ bool first_trb = 0;
+ int start_cycle;
+ u32 field = 0;
+ u32 length_field = 0;
+ struct xhci_ctrl *ctrl = udev->controller;
+ int slot_id = udev->slot_id;
+ int ep_index;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_ring *ring; /* EP transfer ring */
+ union xhci_trb *event;
+
+ int running_total, trb_buff_len;
+ unsigned int total_packet_count;
+ int maxpacketsize;
+ u64 addr;
+ int ret;
+ u32 trb_fields[4];
+ u64 val_64 = (uintptr_t)buffer;
+
+ debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n",
+ udev, pipe, buffer, length);
+
+ ep_index = usb_pipe_ep_index(pipe);
+ virt_dev = ctrl->devs[slot_id];
+
+ xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
+ virt_dev->out_ctx->size);
+
+ ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
+
+ ring = virt_dev->eps[ep_index].ring;
+ /*
+ * How much data is (potentially) left before the 64KB boundary?
+ * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
+ * that the buffer should not span 64KB boundary. if so
+ * we send request in more than 1 TRB by chaining them.
+ */
+ running_total = TRB_MAX_BUFF_SIZE -
+ (lower_32_bits(val_64) & (TRB_MAX_BUFF_SIZE - 1));
+ trb_buff_len = running_total;
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
+
+ /*
+ * If there's some data on this 64KB chunk, or we have to send a
+ * zero-length transfer, we need at least one TRB
+ */
+ if (running_total != 0 || length == 0)
+ num_trbs++;
+
+ /* How many more 64KB chunks to transfer, how many more TRBs? */
+ while (running_total < length) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+
+ /*
+ * XXX: Calling routine prepare_ring() called in place of
+ * prepare_trasfer() as there in 'Linux' since we are not
+ * maintaining multiple TDs/transfer at the same time.
+ */
+ ret = prepare_ring(ctrl, ring,
+ le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ring->enqueue->generic;
+ start_cycle = ring->cycle_state;
+
+ running_total = 0;
+ maxpacketsize = usb_maxpacket(udev, pipe);
+
+ total_packet_count = DIV_ROUND_UP(length, maxpacketsize);
+
+ /* How much data is in the first TRB? */
+ /*
+ * How much data is (potentially) left before the 64KB boundary?
+ * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
+ * that the buffer should not span 64KB boundary. if so
+ * we send request in more than 1 TRB by chaining them.
+ */
+ addr = val_64;
+
+ if (trb_buff_len > length)
+ trb_buff_len = length;
+
+ first_trb = true;
+
+ /* flush the buffer before use */
+ xhci_flush_cache((uint32_t)buffer, length);
+
+ /* Queue the first TRB, even if it's zero-length */
+ do {
+ u32 remainder = 0;
+ field = 0;
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb) {
+ first_trb = false;
+ if (start_cycle == 0)
+ field |= TRB_CYCLE;
+ } else {
+ field |= ring->cycle_state;
+ }
+
+ /*
+ * Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (num_trbs > 1)
+ field |= TRB_CHAIN;
+ else
+ field |= TRB_IOC;
+
+ /* Only set interrupt on short packet for IN endpoints */
+ if (usb_pipein(pipe))
+ field |= TRB_ISP;
+
+ /* Set the TRB length, TD size, and interrupter fields. */
+ if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) < 0x100)
+ remainder = xhci_td_remainder(length - running_total);
+ else
+ remainder = xhci_v1_0_td_remainder(running_total,
+ trb_buff_len,
+ total_packet_count,
+ maxpacketsize,
+ num_trbs - 1);
+
+ length_field = ((trb_buff_len & TRB_LEN_MASK) |
+ remainder |
+ ((0 & TRB_INTR_TARGET_MASK) <<
+ TRB_INTR_TARGET_SHIFT));
+
+ trb_fields[0] = lower_32_bits(addr);
+ trb_fields[1] = upper_32_bits(addr);
+ trb_fields[2] = length_field;
+ trb_fields[3] = field | (TRB_NORMAL << TRB_TYPE_SHIFT);
+
+ queue_trb(ctrl, ring, (num_trbs > 1), trb_fields);
+
+ --num_trbs;
+
+ running_total += trb_buff_len;
+
+ /* Calculate length for next transfer */
+ addr += trb_buff_len;
+ trb_buff_len = min((length - running_total), TRB_MAX_BUFF_SIZE);
+ } while (running_total < length);
+
+ giveback_first_trb(udev, ep_index, start_cycle, start_trb);
+
+ event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
+ if (!event) {
+ debug("XHCI bulk transfer timed out, aborting...\n");
+ abort_td(udev, ep_index);
+ udev->status = USB_ST_NAK_REC; /* closest thing to a timeout */
+ udev->act_len = 0;
+ return -ETIMEDOUT;
+ }
+ field = le32_to_cpu(event->trans_event.flags);
+
+ BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
+ BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
+ BUG_ON(*(void **)(uintptr_t)le64_to_cpu(event->trans_event.buffer) -
+ buffer > (size_t)length);
+
+ record_transfer_result(udev, event, length);
+ xhci_acknowledge_event(ctrl);
+ xhci_inval_cache((uint32_t)buffer, length);
+
+ return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
+}
+
+/**
+ * Queues up the Control Transfer Request
+ *
+ * @param udev pointer to the USB device structure
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param req request type
+ * @param length length of the buffer
+ * @param buffer buffer to be read/written based on the request
+ * @return returns 0 if successful else error code on failure
+ */
+int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
+ struct devrequest *req, int length,
+ void *buffer)
+{
+ int ret;
+ int start_cycle;
+ int num_trbs;
+ u32 field;
+ u32 length_field;
+ u64 buf_64 = 0;
+ struct xhci_generic_trb *start_trb;
+ struct xhci_ctrl *ctrl = udev->controller;
+ int slot_id = udev->slot_id;
+ int ep_index;
+ u32 trb_fields[4];
+ struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
+ struct xhci_ring *ep_ring;
+ union xhci_trb *event;
+
+ debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
+ req->request, req->request,
+ req->requesttype, req->requesttype,
+ le16_to_cpu(req->value), le16_to_cpu(req->value),
+ le16_to_cpu(req->index));
+
+ ep_index = usb_pipe_ep_index(pipe);
+
+ ep_ring = virt_dev->eps[ep_index].ring;
+
+ /*
+ * Check to see if the max packet size for the default control
+ * endpoint changed during FS device enumeration
+ */
+ if (udev->speed == USB_SPEED_FULL) {
+ ret = xhci_check_maxpacket(udev);
+ if (ret < 0)
+ return ret;
+ }
+
+ xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
+ virt_dev->out_ctx->size);
+
+ struct xhci_ep_ctx *ep_ctx = NULL;
+ ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
+
+ /* 1 TRB for setup, 1 for status */
+ num_trbs = 2;
+ /*
+ * Don't need to check if we need additional event data and normal TRBs,
+ * since data in control transfers will never get bigger than 16MB
+ * XXX: can we get a buffer that crosses 64KB boundaries?
+ */
+
+ if (length > 0)
+ num_trbs++;
+ /*
+ * XXX: Calling routine prepare_ring() called in place of
+ * prepare_trasfer() as there in 'Linux' since we are not
+ * maintaining multiple TDs/transfer at the same time.
+ */
+ ret = prepare_ring(ctrl, ep_ring,
+ le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ debug("start_trb %p, start_cycle %d\n", start_trb, start_cycle);
+
+ /* Queue setup TRB - see section 6.4.1.2.1 */
+ /* FIXME better way to translate setup_packet into two u32 fields? */
+ field = 0;
+ field |= TRB_IDT | (TRB_SETUP << TRB_TYPE_SHIFT);
+ if (start_cycle == 0)
+ field |= 0x1;
+
+ /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
+ if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) == 0x100) {
+ if (length > 0) {
+ if (req->requesttype & USB_DIR_IN)
+ field |= (TRB_DATA_IN << TRB_TX_TYPE_SHIFT);
+ else
+ field |= (TRB_DATA_OUT << TRB_TX_TYPE_SHIFT);
+ }
+ }
+
+ debug("req->requesttype = %d, req->request = %d,"
+ "le16_to_cpu(req->value) = %d,"
+ "le16_to_cpu(req->index) = %d,"
+ "le16_to_cpu(req->length) = %d\n",
+ req->requesttype, req->request, le16_to_cpu(req->value),
+ le16_to_cpu(req->index), le16_to_cpu(req->length));
+
+ trb_fields[0] = req->requesttype | req->request << 8 |
+ le16_to_cpu(req->value) << 16;
+ trb_fields[1] = le16_to_cpu(req->index) |
+ le16_to_cpu(req->length) << 16;
+ /* TRB_LEN | (TRB_INTR_TARGET) */
+ trb_fields[2] = (8 | ((0 & TRB_INTR_TARGET_MASK) <<
+ TRB_INTR_TARGET_SHIFT));
+ /* Immediate data in pointer */
+ trb_fields[3] = field;
+ queue_trb(ctrl, ep_ring, true, trb_fields);
+
+ /* Re-initializing field to zero */
+ field = 0;
+ /* If there's data, queue data TRBs */
+ /* Only set interrupt on short packet for IN endpoints */
+ if (usb_pipein(pipe))
+ field = TRB_ISP | (TRB_DATA << TRB_TYPE_SHIFT);
+ else
+ field = (TRB_DATA << TRB_TYPE_SHIFT);
+
+ length_field = (length & TRB_LEN_MASK) | xhci_td_remainder(length) |
+ ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
+ debug("length_field = %d, length = %d,"
+ "xhci_td_remainder(length) = %d , TRB_INTR_TARGET(0) = %d\n",
+ length_field, (length & TRB_LEN_MASK),
+ xhci_td_remainder(length), 0);
+
+ if (length > 0) {
+ if (req->requesttype & USB_DIR_IN)
+ field |= TRB_DIR_IN;
+ buf_64 = (uintptr_t)buffer;
+
+ trb_fields[0] = lower_32_bits(buf_64);
+ trb_fields[1] = upper_32_bits(buf_64);
+ trb_fields[2] = length_field;
+ trb_fields[3] = field | ep_ring->cycle_state;
+
+ xhci_flush_cache((uint32_t)buffer, length);
+ queue_trb(ctrl, ep_ring, true, trb_fields);
+ }
+
+ /*
+ * Queue status TRB -
+ * see Table 7 and sections 4.11.2.2 and 6.4.1.2.3
+ */
+
+ /* If the device sent data, the status stage is an OUT transfer */
+ field = 0;
+ if (length > 0 && req->requesttype & USB_DIR_IN)
+ field = 0;
+ else
+ field = TRB_DIR_IN;
+
+ trb_fields[0] = 0;
+ trb_fields[1] = 0;
+ trb_fields[2] = ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
+ /* Event on completion */
+ trb_fields[3] = field | TRB_IOC |
+ (TRB_STATUS << TRB_TYPE_SHIFT) |
+ ep_ring->cycle_state;
+
+ queue_trb(ctrl, ep_ring, false, trb_fields);
+
+ giveback_first_trb(udev, ep_index, start_cycle, start_trb);
+
+ event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
+ if (!event)
+ goto abort;
+ field = le32_to_cpu(event->trans_event.flags);
+
+ BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
+ BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
+
+ record_transfer_result(udev, event, length);
+ xhci_acknowledge_event(ctrl);
+
+ /* Invalidate buffer to make it available to usb-core */
+ if (length > 0)
+ xhci_inval_cache((uint32_t)buffer, length);
+
+ if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))
+ == COMP_SHORT_TX) {
+ /* Short data stage, clear up additional status stage event */
+ event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
+ if (!event)
+ goto abort;
+ BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
+ BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
+ xhci_acknowledge_event(ctrl);
+ }
+
+ return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
+
+abort:
+ debug("XHCI control transfer timed out, aborting...\n");
+ abort_td(udev, ep_index);
+ udev->status = USB_ST_NAK_REC;
+ udev->act_len = 0;
+ return -ETIMEDOUT;
+}
--- /dev/null
+/*
+ * USB HOST XHCI Controller stack
+ *
+ * Based on xHCI host controller driver in linux-kernel
+ * by Sarah Sharp.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ * Author: Sarah Sharp
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors: Vivek Gautam <gautam.vivek@samsung.com>
+ * Vikas Sajjan <vikas.sajjan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/**
+ * This file gives the xhci stack for usb3.0 looking into
+ * xhci specification Rev1.0 (5/21/10).
+ * The quirk devices support hasn't been given yet.
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <usb.h>
+#include <malloc.h>
+#include <watchdog.h>
+#include <asm/cache.h>
+#include <asm/unaligned.h>
+#include <asm-generic/errno.h>
+#include "xhci.h"
+
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
+static struct descriptor {
+ struct usb_hub_descriptor hub;
+ struct usb_device_descriptor device;
+ struct usb_config_descriptor config;
+ struct usb_interface_descriptor interface;
+ struct usb_endpoint_descriptor endpoint;
+ struct usb_ss_ep_comp_descriptor ep_companion;
+} __attribute__ ((packed)) descriptor = {
+ {
+ 0xc, /* bDescLength */
+ 0x2a, /* bDescriptorType: hub descriptor */
+ 2, /* bNrPorts -- runtime modified */
+ cpu_to_le16(0x8), /* wHubCharacteristics */
+ 10, /* bPwrOn2PwrGood */
+ 0, /* bHubCntrCurrent */
+ {}, /* Device removable */
+ {} /* at most 7 ports! XXX */
+ },
+ {
+ 0x12, /* bLength */
+ 1, /* bDescriptorType: UDESC_DEVICE */
+ cpu_to_le16(0x0300), /* bcdUSB: v3.0 */
+ 9, /* bDeviceClass: UDCLASS_HUB */
+ 0, /* bDeviceSubClass: UDSUBCLASS_HUB */
+ 3, /* bDeviceProtocol: UDPROTO_SSHUBSTT */
+ 9, /* bMaxPacketSize: 512 bytes 2^9 */
+ 0x0000, /* idVendor */
+ 0x0000, /* idProduct */
+ cpu_to_le16(0x0100), /* bcdDevice */
+ 1, /* iManufacturer */
+ 2, /* iProduct */
+ 0, /* iSerialNumber */
+ 1 /* bNumConfigurations: 1 */
+ },
+ {
+ 0x9,
+ 2, /* bDescriptorType: UDESC_CONFIG */
+ cpu_to_le16(0x1f), /* includes SS endpoint descriptor */
+ 1, /* bNumInterface */
+ 1, /* bConfigurationValue */
+ 0, /* iConfiguration */
+ 0x40, /* bmAttributes: UC_SELF_POWER */
+ 0 /* bMaxPower */
+ },
+ {
+ 0x9, /* bLength */
+ 4, /* bDescriptorType: UDESC_INTERFACE */
+ 0, /* bInterfaceNumber */
+ 0, /* bAlternateSetting */
+ 1, /* bNumEndpoints */
+ 9, /* bInterfaceClass: UICLASS_HUB */
+ 0, /* bInterfaceSubClass: UISUBCLASS_HUB */
+ 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
+ 0 /* iInterface */
+ },
+ {
+ 0x7, /* bLength */
+ 5, /* bDescriptorType: UDESC_ENDPOINT */
+ 0x81, /* bEndpointAddress: IN endpoint 1 */
+ 3, /* bmAttributes: UE_INTERRUPT */
+ 8, /* wMaxPacketSize */
+ 255 /* bInterval */
+ },
+ {
+ 0x06, /* ss_bLength */
+ 0x30, /* ss_bDescriptorType: SS EP Companion */
+ 0x00, /* ss_bMaxBurst: allows 1 TX between ACKs */
+ /* ss_bmAttributes: 1 packet per service interval */
+ 0x00,
+ /* ss_wBytesPerInterval: 15 bits for max 15 ports */
+ cpu_to_le16(0x02),
+ },
+};
+
+static struct xhci_ctrl xhcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
+
+/**
+ * Waits for as per specified amount of time
+ * for the "result" to match with "done"
+ *
+ * @param ptr pointer to the register to be read
+ * @param mask mask for the value read
+ * @param done value to be campared with result
+ * @param usec time to wait till
+ * @return 0 if handshake is success else < 0 on failure
+ */
+static int handshake(uint32_t volatile *ptr, uint32_t mask,
+ uint32_t done, int usec)
+{
+ uint32_t result;
+
+ do {
+ result = xhci_readl(ptr);
+ if (result == ~(uint32_t)0)
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ usec--;
+ udelay(1);
+ } while (usec > 0);
+
+ return -ETIMEDOUT;
+}
+
+/**
+ * Set the run bit and wait for the host to be running.
+ *
+ * @param hcor pointer to host controller operation registers
+ * @return status of the Handshake
+ */
+static int xhci_start(struct xhci_hcor *hcor)
+{
+ u32 temp;
+ int ret;
+
+ puts("Starting the controller\n");
+ temp = xhci_readl(&hcor->or_usbcmd);
+ temp |= (CMD_RUN);
+ xhci_writel(&hcor->or_usbcmd, temp);
+
+ /*
+ * Wait for the HCHalted Status bit to be 0 to indicate the host is
+ * running.
+ */
+ ret = handshake(&hcor->or_usbsts, STS_HALT, 0, XHCI_MAX_HALT_USEC);
+ if (ret)
+ debug("Host took too long to start, "
+ "waited %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ return ret;
+}
+
+/**
+ * Resets the XHCI Controller
+ *
+ * @param hcor pointer to host controller operation registers
+ * @return -EBUSY if XHCI Controller is not halted else status of handshake
+ */
+int xhci_reset(struct xhci_hcor *hcor)
+{
+ u32 cmd;
+ u32 state;
+ int ret;
+
+ /* Halting the Host first */
+ debug("// Halt the HC\n");
+ state = xhci_readl(&hcor->or_usbsts) & STS_HALT;
+ if (!state) {
+ cmd = xhci_readl(&hcor->or_usbcmd);
+ cmd &= ~CMD_RUN;
+ xhci_writel(&hcor->or_usbcmd, cmd);
+ }
+
+ ret = handshake(&hcor->or_usbsts,
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+ if (ret) {
+ printf("Host not halted after %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ return -EBUSY;
+ }
+
+ debug("// Reset the HC\n");
+ cmd = xhci_readl(&hcor->or_usbcmd);
+ cmd |= CMD_RESET;
+ xhci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, XHCI_MAX_RESET_USEC);
+ if (ret)
+ return ret;
+
+ /*
+ * xHCI cannot write to any doorbells or operational registers other
+ * than status until the "Controller Not Ready" flag is cleared.
+ */
+ return handshake(&hcor->or_usbsts, STS_CNR, 0, XHCI_MAX_RESET_USEC);
+}
+
+/**
+ * Used for passing endpoint bitmasks between the core and HCDs.
+ * Find the index for an endpoint given its descriptor.
+ * Use the return value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ *
+ * @param desc USB enpdoint Descriptor
+ * @return index of the Endpoint
+ */
+static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc)
+{
+ unsigned int index;
+
+ if (usb_endpoint_xfer_control(desc))
+ index = (unsigned int)(usb_endpoint_num(desc) * 2);
+ else
+ index = (unsigned int)((usb_endpoint_num(desc) * 2) -
+ (usb_endpoint_dir_in(desc) ? 0 : 1));
+
+ return index;
+}
+
+/**
+ * Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ *
+ * @param udev pointer to the Device Data Structure
+ * @param ctx_change flag to indicate the Context has changed or NOT
+ * @return 0 on success, -1 on failure
+ */
+static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ctrl *ctrl = udev->controller;
+ union xhci_trb *event;
+
+ virt_dev = ctrl->devs[udev->slot_id];
+ in_ctx = virt_dev->in_ctx;
+
+ xhci_flush_cache((uint32_t)in_ctx->bytes, in_ctx->size);
+ xhci_queue_command(ctrl, in_ctx->bytes, udev->slot_id, 0,
+ ctx_change ? TRB_EVAL_CONTEXT : TRB_CONFIG_EP);
+ event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
+ BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
+ != udev->slot_id);
+
+ switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
+ case COMP_SUCCESS:
+ debug("Successful %s command\n",
+ ctx_change ? "Evaluate Context" : "Configure Endpoint");
+ break;
+ default:
+ printf("ERROR: %s command returned completion code %d.\n",
+ ctx_change ? "Evaluate Context" : "Configure Endpoint",
+ GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
+ return -EINVAL;
+ }
+
+ xhci_acknowledge_event(ctrl);
+
+ return 0;
+}
+
+/**
+ * Configure the endpoint, programming the device contexts.
+ *
+ * @param udev pointer to the USB device structure
+ * @return returns the status of the xhci_configure_endpoints
+ */
+static int xhci_set_configuration(struct usb_device *udev)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM];
+ int cur_ep;
+ int max_ep_flag = 0;
+ int ep_index;
+ unsigned int dir;
+ unsigned int ep_type;
+ struct xhci_ctrl *ctrl = udev->controller;
+ int num_of_ep;
+ int ep_flag = 0;
+ u64 trb_64 = 0;
+ int slot_id = udev->slot_id;
+ struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
+ struct usb_interface *ifdesc;
+
+ out_ctx = virt_dev->out_ctx;
+ in_ctx = virt_dev->in_ctx;
+
+ num_of_ep = udev->config.if_desc[0].no_of_ep;
+ ifdesc = &udev->config.if_desc[0];
+
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ /* Zero the input context control */
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
+
+ /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */
+ for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
+ ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]);
+ ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1));
+ if (max_ep_flag < ep_flag)
+ max_ep_flag = ep_flag;
+ }
+
+ xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
+
+ /* slot context */
+ xhci_slot_copy(ctrl, in_ctx, out_ctx);
+ slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
+ slot_ctx->dev_info &= ~(LAST_CTX_MASK);
+ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0);
+
+ xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0);
+
+ /* filling up ep contexts */
+ for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
+ struct usb_endpoint_descriptor *endpt_desc = NULL;
+
+ endpt_desc = &ifdesc->ep_desc[cur_ep];
+ trb_64 = 0;
+
+ ep_index = xhci_get_ep_index(endpt_desc);
+ ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
+
+ /* Allocate the ep rings */
+ virt_dev->eps[ep_index].ring = xhci_ring_alloc(1, true);
+ if (!virt_dev->eps[ep_index].ring)
+ return -ENOMEM;
+
+ /*NOTE: ep_desc[0] actually represents EP1 and so on */
+ dir = (((endpt_desc->bEndpointAddress) & (0x80)) >> 7);
+ ep_type = (((endpt_desc->bmAttributes) & (0x3)) | (dir << 2));
+ ep_ctx[ep_index]->ep_info2 =
+ cpu_to_le32(ep_type << EP_TYPE_SHIFT);
+ ep_ctx[ep_index]->ep_info2 |=
+ cpu_to_le32(MAX_PACKET
+ (get_unaligned(&endpt_desc->wMaxPacketSize)));
+
+ ep_ctx[ep_index]->ep_info2 |=
+ cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
+ ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
+
+ trb_64 = (uintptr_t)
+ virt_dev->eps[ep_index].ring->enqueue;
+ ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 |
+ virt_dev->eps[ep_index].ring->cycle_state);
+ }
+
+ return xhci_configure_endpoints(udev, false);
+}
+
+/**
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ *
+ * @param udev pointer to the Device Data Structure
+ * @return 0 if successful else error code on failure
+ */
+static int xhci_address_device(struct usb_device *udev)
+{
+ int ret = 0;
+ struct xhci_ctrl *ctrl = udev->controller;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_virt_device *virt_dev;
+ int slot_id = udev->slot_id;
+ union xhci_trb *event;
+
+ virt_dev = ctrl->devs[slot_id];
+
+ /*
+ * This is the first Set Address since device plug-in
+ * so setting up the slot context.
+ */
+ debug("Setting up addressable devices\n");
+ xhci_setup_addressable_virt_dev(udev);
+
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
+ xhci_queue_command(ctrl, (void *)ctrl_ctx, slot_id, 0, TRB_ADDR_DEV);
+ event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
+ BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != slot_id);
+
+ switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
+ case COMP_CTX_STATE:
+ case COMP_EBADSLT:
+ printf("Setup ERROR: address device command for slot %d.\n",
+ slot_id);
+ ret = -EINVAL;
+ break;
+ case COMP_TX_ERR:
+ puts("Device not responding to set address.\n");
+ ret = -EPROTO;
+ break;
+ case COMP_DEV_ERR:
+ puts("ERROR: Incompatible device"
+ "for address device command.\n");
+ ret = -ENODEV;
+ break;
+ case COMP_SUCCESS:
+ debug("Successful Address Device command\n");
+ udev->status = 0;
+ break;
+ default:
+ printf("ERROR: unexpected command completion code 0x%x.\n",
+ GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
+ ret = -EINVAL;
+ break;
+ }
+
+ xhci_acknowledge_event(ctrl);
+
+ if (ret < 0)
+ /*
+ * TODO: Unsuccessful Address Device command shall leave the
+ * slot in default state. So, issue Disable Slot command now.
+ */
+ return ret;
+
+ xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
+ virt_dev->out_ctx->size);
+ slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->out_ctx);
+
+ debug("xHC internal address is: %d\n",
+ le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+
+ return 0;
+}
+
+/**
+ * Issue Enable slot command to the controller to allocate
+ * device slot and assign the slot id. It fails if the xHC
+ * ran out of device slots, the Enable Slot command timed out,
+ * or allocating memory failed.
+ *
+ * @param udev pointer to the Device Data Structure
+ * @return Returns 0 on succes else return error code on failure
+ */
+int usb_alloc_device(struct usb_device *udev)
+{
+ union xhci_trb *event;
+ struct xhci_ctrl *ctrl = udev->controller;
+ int ret;
+
+ /*
+ * Root hub will be first device to be initailized.
+ * If this device is root-hub, don't do any xHC related
+ * stuff.
+ */
+ if (ctrl->rootdev == 0) {
+ udev->speed = USB_SPEED_SUPER;
+ return 0;
+ }
+
+ xhci_queue_command(ctrl, NULL, 0, 0, TRB_ENABLE_SLOT);
+ event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
+ BUG_ON(GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))
+ != COMP_SUCCESS);
+
+ udev->slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags));
+
+ xhci_acknowledge_event(ctrl);
+
+ ret = xhci_alloc_virt_device(udev);
+ if (ret < 0) {
+ /*
+ * TODO: Unsuccessful Address Device command shall leave
+ * the slot in default. So, issue Disable Slot command now.
+ */
+ puts("Could not allocate xHCI USB device data structures\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor. If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ *
+ * @param udev pointer to the Device Data Structure
+ * @return returns the status of the xhci_configure_endpoints
+ */
+int xhci_check_maxpacket(struct usb_device *udev)
+{
+ struct xhci_ctrl *ctrl = udev->controller;
+ unsigned int slot_id = udev->slot_id;
+ int ep_index = 0; /* control endpoint */
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ int max_packet_size;
+ int hw_max_packet_size;
+ int ret = 0;
+ struct usb_interface *ifdesc;
+
+ ifdesc = &udev->config.if_desc[0];
+
+ out_ctx = ctrl->devs[slot_id]->out_ctx;
+ xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
+
+ ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
+ hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+ max_packet_size = usb_endpoint_maxp(&ifdesc->ep_desc[0]);
+ if (hw_max_packet_size != max_packet_size) {
+ debug("Max Packet Size for ep 0 changed.\n");
+ debug("Max packet size in usb_device = %d\n", max_packet_size);
+ debug("Max packet size in xHCI HW = %d\n", hw_max_packet_size);
+ debug("Issuing evaluate context command.\n");
+
+ /* Set up the modified control endpoint 0 */
+ xhci_endpoint_copy(ctrl, ctrl->devs[slot_id]->in_ctx,
+ ctrl->devs[slot_id]->out_ctx, ep_index);
+ in_ctx = ctrl->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
+ ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
+ ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
+
+ /*
+ * Set up the input context flags for the command
+ * FIXME: This won't work if a non-default control endpoint
+ * changes max packet sizes.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
+ ret = xhci_configure_endpoints(udev, true);
+ }
+ return ret;
+}
+
+/**
+ * Clears the Change bits of the Port Status Register
+ *
+ * @param wValue request value
+ * @param wIndex request index
+ * @param addr address of posrt status register
+ * @param port_status state of port status register
+ * @return none
+ */
+static void xhci_clear_port_change_bit(u16 wValue,
+ u16 wIndex, volatile uint32_t *addr, u32 port_status)
+{
+ char *port_change_bit;
+ u32 status;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_C_RESET:
+ status = PORT_RC;
+ port_change_bit = "reset";
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ status = PORT_CSC;
+ port_change_bit = "connect";
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ status = PORT_OCC;
+ port_change_bit = "over-current";
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ status = PORT_PEC;
+ port_change_bit = "enable/disable";
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ status = PORT_PLC;
+ port_change_bit = "suspend/resume";
+ break;
+ default:
+ /* Should never happen */
+ return;
+ }
+
+ /* Change bits are all write 1 to clear */
+ xhci_writel(addr, port_status | status);
+
+ port_status = xhci_readl(addr);
+ debug("clear port %s change, actual port %d status = 0x%x\n",
+ port_change_bit, wIndex, port_status);
+}
+
+/**
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ *
+ * @param state state of the Port Status and Control Regsiter
+ * @return a value that would result in the port being in the
+ * same state, if the value was written to the port
+ * status control register.
+ */
+static u32 xhci_port_state_to_neutral(u32 state)
+{
+ /* Save read-only status and port state */
+ return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+/**
+ * Submits the Requests to the XHCI Host Controller
+ *
+ * @param udev pointer to the USB device structure
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param buffer buffer to be read/written based on the request
+ * @return returns 0 if successful else -1 on failure
+ */
+static int xhci_submit_root(struct usb_device *udev, unsigned long pipe,
+ void *buffer, struct devrequest *req)
+{
+ uint8_t tmpbuf[4];
+ u16 typeReq;
+ void *srcptr = NULL;
+ int len, srclen;
+ uint32_t reg;
+ volatile uint32_t *status_reg;
+ struct xhci_ctrl *ctrl = udev->controller;
+ struct xhci_hcor *hcor = ctrl->hcor;
+
+ if (((req->requesttype & USB_RT_PORT) &&
+ le16_to_cpu(req->index)) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) {
+ printf("The request port(%d) is not configured\n",
+ le16_to_cpu(req->index) - 1);
+ return -EINVAL;
+ }
+
+ status_reg = (volatile uint32_t *)
+ (&hcor->portregs[le16_to_cpu(req->index) - 1].or_portsc);
+ srclen = 0;
+
+ typeReq = req->request | req->requesttype << 8;
+
+ switch (typeReq) {
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ switch (le16_to_cpu(req->value) >> 8) {
+ case USB_DT_DEVICE:
+ debug("USB_DT_DEVICE request\n");
+ srcptr = &descriptor.device;
+ srclen = 0x12;
+ break;
+ case USB_DT_CONFIG:
+ debug("USB_DT_CONFIG config\n");
+ srcptr = &descriptor.config;
+ srclen = 0x19;
+ break;
+ case USB_DT_STRING:
+ debug("USB_DT_STRING config\n");
+ switch (le16_to_cpu(req->value) & 0xff) {
+ case 0: /* Language */
+ srcptr = "\4\3\11\4";
+ srclen = 4;
+ break;
+ case 1: /* Vendor String */
+ srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
+ srclen = 14;
+ break;
+ case 2: /* Product Name */
+ srcptr = "\52\3X\0H\0C\0I\0 "
+ "\0H\0o\0s\0t\0 "
+ "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
+ srclen = 42;
+ break;
+ default:
+ printf("unknown value DT_STRING %x\n",
+ le16_to_cpu(req->value));
+ goto unknown;
+ }
+ break;
+ default:
+ printf("unknown value %x\n", le16_to_cpu(req->value));
+ goto unknown;
+ }
+ break;
+ case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
+ switch (le16_to_cpu(req->value) >> 8) {
+ case USB_DT_HUB:
+ debug("USB_DT_HUB config\n");
+ srcptr = &descriptor.hub;
+ srclen = 0x8;
+ break;
+ default:
+ printf("unknown value %x\n", le16_to_cpu(req->value));
+ goto unknown;
+ }
+ break;
+ case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
+ debug("USB_REQ_SET_ADDRESS\n");
+ ctrl->rootdev = le16_to_cpu(req->value);
+ break;
+ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+ /* Do nothing */
+ break;
+ case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
+ tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */
+ tmpbuf[1] = 0;
+ srcptr = tmpbuf;
+ srclen = 2;
+ break;
+ case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
+ memset(tmpbuf, 0, 4);
+ reg = xhci_readl(status_reg);
+ if (reg & PORT_CONNECT) {
+ tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
+ switch (reg & DEV_SPEED_MASK) {
+ case XDEV_FS:
+ debug("SPEED = FULLSPEED\n");
+ break;
+ case XDEV_LS:
+ debug("SPEED = LOWSPEED\n");
+ tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
+ break;
+ case XDEV_HS:
+ debug("SPEED = HIGHSPEED\n");
+ tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
+ break;
+ case XDEV_SS:
+ debug("SPEED = SUPERSPEED\n");
+ tmpbuf[1] |= USB_PORT_STAT_SUPER_SPEED >> 8;
+ break;
+ }
+ }
+ if (reg & PORT_PE)
+ tmpbuf[0] |= USB_PORT_STAT_ENABLE;
+ if ((reg & PORT_PLS_MASK) == XDEV_U3)
+ tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
+ if (reg & PORT_OC)
+ tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
+ if (reg & PORT_RESET)
+ tmpbuf[0] |= USB_PORT_STAT_RESET;
+ if (reg & PORT_POWER)
+ /*
+ * XXX: This Port power bit (for USB 3.0 hub)
+ * we are faking in USB 2.0 hub port status;
+ * since there's a change in bit positions in
+ * two:
+ * USB 2.0 port status PP is at position[8]
+ * USB 3.0 port status PP is at position[9]
+ * So, we are still keeping it at position [8]
+ */
+ tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
+ if (reg & PORT_CSC)
+ tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
+ if (reg & PORT_PEC)
+ tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
+ if (reg & PORT_OCC)
+ tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
+ if (reg & PORT_RC)
+ tmpbuf[2] |= USB_PORT_STAT_C_RESET;
+
+ srcptr = tmpbuf;
+ srclen = 4;
+ break;
+ case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ reg = xhci_readl(status_reg);
+ reg = xhci_port_state_to_neutral(reg);
+ switch (le16_to_cpu(req->value)) {
+ case USB_PORT_FEAT_ENABLE:
+ reg |= PORT_PE;
+ xhci_writel(status_reg, reg);
+ break;
+ case USB_PORT_FEAT_POWER:
+ reg |= PORT_POWER;
+ xhci_writel(status_reg, reg);
+ break;
+ case USB_PORT_FEAT_RESET:
+ reg |= PORT_RESET;
+ xhci_writel(status_reg, reg);
+ break;
+ default:
+ printf("unknown feature %x\n", le16_to_cpu(req->value));
+ goto unknown;
+ }
+ break;
+ case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ reg = xhci_readl(status_reg);
+ reg = xhci_port_state_to_neutral(reg);
+ switch (le16_to_cpu(req->value)) {
+ case USB_PORT_FEAT_ENABLE:
+ reg &= ~PORT_PE;
+ break;
+ case USB_PORT_FEAT_POWER:
+ reg &= ~PORT_POWER;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ case USB_PORT_FEAT_C_ENABLE:
+ xhci_clear_port_change_bit((le16_to_cpu(req->value)),
+ le16_to_cpu(req->index),
+ status_reg, reg);
+ break;
+ default:
+ printf("unknown feature %x\n", le16_to_cpu(req->value));
+ goto unknown;
+ }
+ xhci_writel(status_reg, reg);
+ break;
+ default:
+ puts("Unknown request\n");
+ goto unknown;
+ }
+
+ debug("scrlen = %d\n req->length = %d\n",
+ srclen, le16_to_cpu(req->length));
+
+ len = min(srclen, le16_to_cpu(req->length));
+
+ if (srcptr != NULL && len > 0)
+ memcpy(buffer, srcptr, len);
+ else
+ debug("Len is 0\n");
+
+ udev->act_len = len;
+ udev->status = 0;
+
+ return 0;
+
+unknown:
+ udev->act_len = 0;
+ udev->status = USB_ST_STALLED;
+
+ return -ENODEV;
+}
+
+/**
+ * Submits the INT request to XHCI Host cotroller
+ *
+ * @param udev pointer to the USB device
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param buffer buffer to be read/written based on the request
+ * @param length length of the buffer
+ * @param interval interval of the interrupt
+ * @return 0
+ */
+int
+submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
+ int length, int interval)
+{
+ /*
+ * TODO: Not addressing any interrupt type transfer requests
+ * Add support for it later.
+ */
+ return -EINVAL;
+}
+
+/**
+ * submit the BULK type of request to the USB Device
+ *
+ * @param udev pointer to the USB device
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param buffer buffer to be read/written based on the request
+ * @param length length of the buffer
+ * @return returns 0 if successful else -1 on failure
+ */
+int
+submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
+ int length)
+{
+ if (usb_pipetype(pipe) != PIPE_BULK) {
+ printf("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
+ return -EINVAL;
+ }
+
+ return xhci_bulk_tx(udev, pipe, length, buffer);
+}
+
+/**
+ * submit the control type of request to the Root hub/Device based on the devnum
+ *
+ * @param udev pointer to the USB device
+ * @param pipe contains the DIR_IN or OUT , devnum
+ * @param buffer buffer to be read/written based on the request
+ * @param length length of the buffer
+ * @param setup Request type
+ * @return returns 0 if successful else -1 on failure
+ */
+int
+submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
+ int length, struct devrequest *setup)
+{
+ struct xhci_ctrl *ctrl = udev->controller;
+ int ret = 0;
+
+ if (usb_pipetype(pipe) != PIPE_CONTROL) {
+ printf("non-control pipe (type=%lu)", usb_pipetype(pipe));
+ return -EINVAL;
+ }
+
+ if (usb_pipedevice(pipe) == ctrl->rootdev)
+ return xhci_submit_root(udev, pipe, buffer, setup);
+
+ if (setup->request == USB_REQ_SET_ADDRESS)
+ return xhci_address_device(udev);
+
+ if (setup->request == USB_REQ_SET_CONFIGURATION) {
+ ret = xhci_set_configuration(udev);
+ if (ret) {
+ puts("Failed to configure xHCI endpoint\n");
+ return ret;
+ }
+ }
+
+ return xhci_ctrl_tx(udev, pipe, setup, length, buffer);
+}
+
+/**
+ * Intialises the XHCI host controller
+ * and allocates the necessary data structures
+ *
+ * @param index index to the host controller data structure
+ * @return pointer to the intialised controller
+ */
+int usb_lowlevel_init(int index, void **controller)
+{
+ uint32_t val;
+ uint32_t val2;
+ uint32_t reg;
+ struct xhci_hccr *hccr;
+ struct xhci_hcor *hcor;
+ struct xhci_ctrl *ctrl;
+
+ if (xhci_hcd_init(index, &hccr, (struct xhci_hcor **)&hcor) != 0)
+ return -ENODEV;
+
+ if (xhci_reset(hcor) != 0)
+ return -ENODEV;
+
+ ctrl = &xhcic[index];
+
+ ctrl->hccr = hccr;
+ ctrl->hcor = hcor;
+
+ /*
+ * Program the Number of Device Slots Enabled field in the CONFIG
+ * register with the max value of slots the HC can handle.
+ */
+ val = (xhci_readl(&hccr->cr_hcsparams1) & HCS_SLOTS_MASK);
+ val2 = xhci_readl(&hcor->or_config);
+ val |= (val2 & ~HCS_SLOTS_MASK);
+ xhci_writel(&hcor->or_config, val);
+
+ /* initializing xhci data structures */
+ if (xhci_mem_init(ctrl, hccr, hcor) < 0)
+ return -ENOMEM;
+
+ reg = xhci_readl(&hccr->cr_hcsparams1);
+ descriptor.hub.bNbrPorts = ((reg & HCS_MAX_PORTS_MASK) >>
+ HCS_MAX_PORTS_SHIFT);
+ printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
+
+ /* Port Indicators */
+ reg = xhci_readl(&hccr->cr_hccparams);
+ if (HCS_INDICATOR(reg))
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x80, &descriptor.hub.wHubCharacteristics);
+
+ /* Port Power Control */
+ if (HCC_PPC(reg))
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x01, &descriptor.hub.wHubCharacteristics);
+
+ if (xhci_start(hcor)) {
+ xhci_reset(hcor);
+ return -ENODEV;
+ }
+
+ /* Zero'ing IRQ control register and IRQ pending register */
+ xhci_writel(&ctrl->ir_set->irq_control, 0x0);
+ xhci_writel(&ctrl->ir_set->irq_pending, 0x0);
+
+ reg = HC_VERSION(xhci_readl(&hccr->cr_capbase));
+ printf("USB XHCI %x.%02x\n", reg >> 8, reg & 0xff);
+
+ *controller = &xhcic[index];
+
+ return 0;
+}
+
+/**
+ * Stops the XHCI host controller
+ * and cleans up all the related data structures
+ *
+ * @param index index to the host controller data structure
+ * @return none
+ */
+int usb_lowlevel_stop(int index)
+{
+ struct xhci_ctrl *ctrl = (xhcic + index);
+ u32 temp;
+
+ xhci_reset(ctrl->hcor);
+
+ debug("// Disabling event ring interrupts\n");
+ temp = xhci_readl(&ctrl->hcor->or_usbsts);
+ xhci_writel(&ctrl->hcor->or_usbsts, temp & ~STS_EINT);
+ temp = xhci_readl(&ctrl->ir_set->irq_pending);
+ xhci_writel(&ctrl->ir_set->irq_pending, ER_IRQ_DISABLE(temp));
+
+ xhci_hcd_stop(index);
+
+ xhci_cleanup(ctrl);
+
+ return 0;
+}
--- /dev/null
+/*
+ * USB HOST XHCI Controller
+ *
+ * Based on xHCI host controller driver in linux-kernel
+ * by Sarah Sharp.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ * Author: Sarah Sharp
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors: Vivek Gautam <gautam.vivek@samsung.com>
+ * Vikas Sajjan <vikas.sajjan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef HOST_XHCI_H_
+#define HOST_XHCI_H_
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+#define upper_32_bits(n) (u32)((n) >> 32)
+#define lower_32_bits(n) (u32)(n)
+
+#define MAX_EP_CTX_NUM 31
+#define XHCI_ALIGNMENT 64
+/* Generic timeout for XHCI events */
+#define XHCI_TIMEOUT 5000
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS 256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS 127
+
+/* Up to 16 ms to halt an HC */
+#define XHCI_MAX_HALT_USEC (16*1000)
+
+#define XHCI_MAX_RESET_USEC (250*1000)
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define XHCI_PORT_RO ((1 << 0) | (1 << 3) | (0xf << 10) | (1 << 30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS ((0xf << 5) | (1 << 9) | (0x3 << 14) | (0x7 << 25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define XHCI_PORT_RW1S ((1 << 4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED,
+ * warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS ((1 << 1) | (0x7f << 17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define XHCI_PORT_RW ((1 << 16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define XHCI_PORT_RZ ((1 << 2) | (1 << 24) | (0xf << 28))
+
+/*
+ * XHCI Register Space.
+ */
+struct xhci_hccr {
+ uint32_t cr_capbase;
+ uint32_t cr_hcsparams1;
+ uint32_t cr_hcsparams2;
+ uint32_t cr_hcsparams3;
+ uint32_t cr_hccparams;
+ uint32_t cr_dboff;
+ uint32_t cr_rtsoff;
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
+/* bits 31:16 */
+#define HC_VERSION(p) (((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK 0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS_SHIFT 24
+#define HCS_MAX_PORTS_MASK (0x7f << HCS_MAX_PORTS_SHIFT)
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p) (((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p) ((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p) ((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p) ((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p) ((p) & (1 << 7))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define DBOFF_MASK (~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define RTSOFF_MASK (~0x1f)
+
+};
+
+struct xhci_hcor_port_regs {
+ volatile uint32_t or_portsc;
+ volatile uint32_t or_portpmsc;
+ volatile uint32_t or_portli;
+ volatile uint32_t reserved_3;
+};
+
+struct xhci_hcor {
+ volatile uint32_t or_usbcmd;
+ volatile uint32_t or_usbsts;
+ volatile uint32_t or_pagesize;
+ volatile uint32_t reserved_0[2];
+ volatile uint32_t or_dnctrl;
+ volatile uint64_t or_crcr;
+ volatile uint32_t reserved_1[4];
+ volatile uint64_t or_dcbaap;
+ volatile uint32_t or_config;
+ volatile uint32_t reserved_2[241];
+ struct xhci_hcor_port_regs portregs[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS];
+
+ uint32_t reserved_4[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS * 254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET (1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET (1 << 7)
+/* host controller save/restore state. */
+#define CMD_CSS (1 << 8)
+#define CMD_CRS (1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX (1 << 11)
+/* bits 12:31 are reserved (and should be preserved on writes). */
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT XHCI_STS_HALT
+/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
+#define STS_FATAL (1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT (1 << 3)
+/* port change detect */
+#define STS_PORT (1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE (1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE (1 << 9)
+/* true: save or restore error */
+#define STS_SRE (1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE (1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define DEV_NOTE_MASK (0xffff)
+#define ENABLE_DEV_NOTE(x) (1 << (x))
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE (1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT (1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING (1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_RSVD_BITS (0x3f)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p) ((p) & 0xff)
+/* bits 8:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT (1 << 0)
+/* true: port enabled */
+#define PORT_PE (1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC (1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET (1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+#define PORT_PLS_MASK (0xf << 5)
+#define XDEV_U0 (0x0 << 5)
+#define XDEV_U2 (0x2 << 5)
+#define XDEV_U3 (0x3 << 5)
+#define XDEV_RESUME (0xf << 5)
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER (1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK (0xf << 10)
+#define XDEV_FS (0x1 << 10)
+#define XDEV_LS (0x2 << 10)
+#define XDEV_HS (0x3 << 10)
+#define XDEV_SS (0x4 << 10)
+#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define SLOT_SPEED_FS (XDEV_FS << 10)
+#define SLOT_SPEED_LS (XDEV_LS << 10)
+#define SLOT_SPEED_HS (XDEV_HS << 10)
+#define SLOT_SPEED_SS (XDEV_SS << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF (0 << 14)
+#define PORT_LED_AMBER (1 << 14)
+#define PORT_LED_GREEN (2 << 14)
+#define PORT_LED_MASK (3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE (1 << 16)
+/* true: connect status change */
+#define PORT_CSC (1 << 17)
+/* true: port enable change */
+#define PORT_PEC (1 << 18)
+/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
+ * into an enabled state, and the device into the default state. A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC (1 << 19)
+/* true: over-current change */
+#define PORT_OCC (1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC (1 << 21)
+/* port link status change - set on some port link state transitions:
+ * Transition Reason
+ * --------------------------------------------------------------------------
+ * - U3 to Resume Wakeup signaling from a device
+ * - Resume to Recovery to U0 USB 3.0 device resume
+ * - Resume to U0 USB 2.0 device resume
+ * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
+ * - U3 to U0 Software resume of USB 2.0 device complete
+ * - U2 to U0 L1 resume of USB 2.1 device complete
+ * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
+ * - U0 to disabled L1 entry error with USB 2.1 device
+ * - Any state to inactive Error on USB 3.0 port
+ */
+#define PORT_PLC (1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC (1 << 23)
+/* bit 24 reserved */
+/* wake on connect (enable) */
+#define PORT_WKCONN_E (1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E (1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E (1 << 27)
+/* bits 28:29 reserved */
+/* true: device is removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE (1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR (1 << 31)
+
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us. 0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
+/* Bits 24:31 for port testing */
+
+/* USB2 Protocol PORTSPMSC */
+#define PORT_L1S_MASK 7
+#define PORT_L1S_SUCCESS 1
+#define PORT_RWE (1 << 3)
+#define PORT_HIRD(p) (((p) & 0xf) << 4)
+#define PORT_HIRD_MASK (0xf << 4)
+#define PORT_L1DS(p) (((p) & 0xff) << 8)
+#define PORT_HLE (1 << 16)
+
+/**
+* struct xhci_intr_reg - Interrupt Register Set
+* @irq_pending: IMAN - Interrupt Management Register. Used to enable
+* interrupts and check for pending interrupts.
+* @irq_control: IMOD - Interrupt Moderation Register.
+* Used to throttle interrupts.
+* @erst_size: Number of segments in the
+ Event Ring Segment Table (ERST).
+* @erst_base: ERST base address.
+* @erst_dequeue: Event ring dequeue pointer.
+*
+* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+* Ring Segment Table (ERST) associated with it.
+* The event ring is comprised of multiple segments of the same size.
+* The HC places events on the ring and "updates the Cycle bit in the TRBs to
+* indicate to software the current position of the Enqueue Pointer."
+* The HCD (Linux) processes those events and updates the dequeue pointer.
+*/
+struct xhci_intr_reg {
+ volatile __le32 irq_pending;
+ volatile __le32 irq_control;
+ volatile __le32 erst_size;
+ volatile __le32 rsvd;
+ volatile __le64 erst_base;
+ volatile __le64 erst_dequeue;
+};
+
+/* irq_pending bitmasks */
+#define ER_IRQ_PENDING(p) ((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
+#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
+#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK (0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK (0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define ERST_SIZE_MASK (0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK (0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB (1 << 3)
+#define ERST_PTR_MASK (0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index: MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+ __le32 microframe_index;
+ __le32 rsvd[7];
+ struct xhci_intr_reg ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Bits 0 - 7: Endpoint target
+ * Bits 8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+ volatile __le32 doorbell[256];
+};
+
+#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST 0x00000000
+
+/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+/**
+ * struct xhci_container_ctx
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+ unsigned type;
+#define XHCI_CTX_TYPE_DEVICE 0x1
+#define XHCI_CTX_TYPE_INPUT 0x2
+
+ int size;
+ u8 *bytes;
+};
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info: Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2: Max exit latency for device number, root hub port number
+ * @tt_info: tt_info is used to construct split transaction tokens
+ * @dev_state: slot state and device address
+ *
+ * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+ __le32 dev_info;
+ __le32 dev_info2;
+ __le32 tt_info;
+ __le32 dev_state;
+ /* offset 0x10 to 0x1f reserved for HC internal use */
+ __le32 reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK (0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED (0xf << 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT (0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB (0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK (0x1f << 27)
+#define LAST_CTX(p) ((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
+#define SLOT_FLAG (1 << 0)
+#define EP0_FLAG (1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT (0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
+#define ROOT_HUB_PORT_MASK (0xff)
+#define ROOT_HUB_PORT_SHIFT (16)
+#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
+/* Maximum number of ports under a hub device */
+#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device. '0' if attached to root hub port.
+ */
+#define TT_SLOT (0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT (0xff << 8)
+#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK (0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE (0x1f << 27)
+#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+
+#define SLOT_STATE_DISABLED 0
+#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT 1
+#define SLOT_STATE_ADDRESSED 2
+#define SLOT_STATE_CONFIGURED 3
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info: endpoint state, streams, mult, and interval information.
+ * @ep_info2: information on endpoint type, max packet size, max burst size,
+ * error count, and whether the HC will force an event for all
+ * transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ * defines one stream, this points to the endpoint transfer ring.
+ * Otherwise, it points to a stream context array, which has a
+ * ring pointer for each flow.
+ * @tx_info:
+ * Average TRB lengths for the endpoint ring and
+ * max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2.This assumes the HC uses 32-byte context
+ * structures.If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+ __le32 ep_info;
+ __le32 ep_info2;
+ __le64 deq;
+ __le32 tx_info;
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ __le32 reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK (0xf)
+#define EP_STATE_DISABLED 0
+#define EP_STATE_RUNNING 1
+#define EP_STATE_HALTED 2
+#define EP_STATE_STOPPED 3
+#define EP_STATE_ERROR 4
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p) (((p) & 0x3) << 8)
+#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p) (((p) & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
+#define EP_MAXPSTREAMS_MASK (0x1f << 10)
+#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
+/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
+#define EP_HAS_LSA (1 << 15)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define FORCE_EVENT (0x1)
+#define ERROR_COUNT(p) (((p) & 0x3) << 1)
+#define ERROR_COUNT_SHIFT (1)
+#define ERROR_COUNT_MASK (0x3)
+#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
+#define EP_TYPE(p) ((p) << 3)
+#define EP_TYPE_SHIFT (3)
+#define ISOC_OUT_EP 1
+#define BULK_OUT_EP 2
+#define INT_OUT_EP 3
+#define CTRL_EP 4
+#define ISOC_IN_EP 5
+#define BULK_IN_EP 6
+#define INT_IN_EP 7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p) (((p)&0xff) << 8)
+#define MAX_BURST_MASK (0xff)
+#define MAX_BURST_SHIFT (8)
+#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
+#define MAX_PACKET(p) (((p)&0xffff) << 16)
+#define MAX_PACKET_MASK (0xffff)
+#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
+#define MAX_PACKET_SHIFT (16)
+
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p) ((p) & 0x7ff)
+
+/* tx_info bitmasks */
+#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
+#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
+
+/* deq bitmasks */
+#define EP_CTX_CYCLE_MASK (1 << 0)
+
+
+/**
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
+ *
+ * @drop_context: set the bit of the endpoint context you want to disable
+ * @add_context: set the bit of the endpoint context you want to enable
+ */
+struct xhci_input_control_ctx {
+ volatile __le32 drop_flags;
+ volatile __le32 add_flags;
+ __le32 rsvd2[6];
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+ /* 64-bit device addresses; we only write 32-bit addresses */
+ __le64 dev_context_ptrs[MAX_HC_SLOTS];
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_transfer_event {
+ /* 64-bit buffer address, or immediate data */
+ __le64 buffer;
+ __le32 transfer_len;
+ /* This field is interpreted differently based on the type of TRB */
+ volatile __le32 flags;
+};
+
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK (0xff << 24)
+#define COMP_CODE_SHIFT (24)
+#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
+
+typedef enum {
+ COMP_SUCCESS = 1,
+ /* Data Buffer Error */
+ COMP_DB_ERR, /* 2 */
+ /* Babble Detected Error */
+ COMP_BABBLE, /* 3 */
+ /* USB Transaction Error */
+ COMP_TX_ERR, /* 4 */
+ /* TRB Error - some TRB field is invalid */
+ COMP_TRB_ERR, /* 5 */
+ /* Stall Error - USB device is stalled */
+ COMP_STALL, /* 6 */
+ /* Resource Error - HC doesn't have memory for that device configuration */
+ COMP_ENOMEM, /* 7 */
+ /* Bandwidth Error - not enough room in schedule for this dev config */
+ COMP_BW_ERR, /* 8 */
+ /* No Slots Available Error - HC ran out of device slots */
+ COMP_ENOSLOTS, /* 9 */
+ /* Invalid Stream Type Error */
+ COMP_STREAM_ERR, /* 10 */
+ /* Slot Not Enabled Error - doorbell rung for disabled device slot */
+ COMP_EBADSLT, /* 11 */
+ /* Endpoint Not Enabled Error */
+ COMP_EBADEP,/* 12 */
+ /* Short Packet */
+ COMP_SHORT_TX, /* 13 */
+ /* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
+ COMP_UNDERRUN, /* 14 */
+ /* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
+ COMP_OVERRUN, /* 15 */
+ /* Virtual Function Event Ring Full Error */
+ COMP_VF_FULL, /* 16 */
+ /* Parameter Error - Context parameter is invalid */
+ COMP_EINVAL, /* 17 */
+ /* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
+ COMP_BW_OVER,/* 18 */
+ /* Context State Error - illegal context state transition requested */
+ COMP_CTX_STATE,/* 19 */
+ /* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
+ COMP_PING_ERR,/* 20 */
+ /* Event Ring is full */
+ COMP_ER_FULL,/* 21 */
+ /* Incompatible Device Error */
+ COMP_DEV_ERR,/* 22 */
+ /* Missed Service Error - HC couldn't service an isoc ep within interval */
+ COMP_MISSED_INT,/* 23 */
+ /* Successfully stopped command ring */
+ COMP_CMD_STOP, /* 24 */
+ /* Successfully aborted current command and stopped command ring */
+ COMP_CMD_ABORT, /* 25 */
+ /* Stopped - transfer was terminated by a stop endpoint command */
+ COMP_STOP,/* 26 */
+ /* Same as COMP_EP_STOPPED, but the transferred length in the event
+ * is invalid */
+ COMP_STOP_INVAL, /* 27*/
+ /* Control Abort Error - Debug Capability - control pipe aborted */
+ COMP_DBG_ABORT, /* 28 */
+ /* Max Exit Latency Too Large Error */
+ COMP_MEL_ERR,/* 29 */
+ /* TRB type 30 reserved */
+ /* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
+ COMP_BUFF_OVER = 31,
+ /* Event Lost Error - xHC has an "internal event overrun condition" */
+ COMP_ISSUES, /* 32 */
+ /* Undefined Error - reported when other error codes don't apply */
+ COMP_UNKNOWN, /* 33 */
+ /* Invalid Stream ID Error */
+ COMP_STRID_ERR, /* 34 */
+ /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
+ COMP_2ND_BW_ERR, /* 35 */
+ /* Split Transaction Error */
+ COMP_SPLIT_ERR /* 36 */
+
+} xhci_comp_code;
+
+struct xhci_link_trb {
+ /* 64-bit segment pointer*/
+ volatile __le64 segment_ptr;
+ volatile __le32 intr_target;
+ volatile __le32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE (0x1 << 1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+ /* Pointer to command TRB, or the value passed by the event data trb */
+ volatile __le64 cmd_trb;
+ volatile __le32 status;
+ volatile __le32 flags;
+};
+
+/* flags bitmasks */
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p) (((p) & (0xff << 24)) >> 24)
+#define TRB_TO_SLOT_ID_SHIFT (24)
+#define TRB_TO_SLOT_ID_MASK (0xff << TRB_TO_SLOT_ID_SHIFT)
+#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
+#define SLOT_ID_FOR_TRB_MASK (0xff)
+#define SLOT_ID_FOR_TRB_SHIFT (24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
+#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
+
+#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
+#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
+#define LAST_EP_INDEX 30
+
+/* Set TR Dequeue Pointer command TRB fields */
+#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
+#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
+
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
+#define PORT_ID_SHIFT (24)
+#define PORT_ID_MASK (0xff << PORT_ID_SHIFT)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define TRB_LEN(p) ((p) & 0x1ffff)
+#define TRB_LEN_MASK (0x1ffff)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET_SHIFT (22)
+#define TRB_INTR_TARGET_MASK (0x3ff)
+#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
+#define TRB_TBC(p) (((p) & 0x3) << 7)
+#define TRB_TLBPC(p) (((p) & 0xf) << 16)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE (1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT (1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP (1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP (1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN (1<<4)
+/* Interrupt on completion */
+#define TRB_IOC (1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT (1<<6)
+
+/* Block Event Interrupt */
+#define TRB_BEI (1<<9)
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN (1<<16)
+#define TRB_TX_TYPE(p) ((p) << 16)
+#define TRB_TX_TYPE_SHIFT (16)
+#define TRB_DATA_OUT 2
+#define TRB_DATA_IN 3
+
+/* Isochronous TRB specific fields */
+#define TRB_SIA (1 << 31)
+
+struct xhci_generic_trb {
+ volatile __le32 field[4];
+};
+
+union xhci_trb {
+ struct xhci_link_trb link;
+ struct xhci_transfer_event trans_event;
+ struct xhci_event_cmd event_cmd;
+ struct xhci_generic_trb generic;
+};
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK (0xfc00)
+#define TRB_TYPE(p) ((p) << 10)
+#define TRB_TYPE_SHIFT (10)
+#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs */
+typedef enum {
+ /* bulk, interrupt, isoc scatter/gather, and control data stage */
+ TRB_NORMAL = 1,
+ /* setup stage for control transfers */
+ TRB_SETUP, /* 2 */
+ /* data stage for control transfers */
+ TRB_DATA, /* 3 */
+ /* status stage for control transfers */
+ TRB_STATUS, /* 4 */
+ /* isoc transfers */
+ TRB_ISOC, /* 5 */
+ /* TRB for linking ring segments */
+ TRB_LINK, /* 6 */
+ /* TRB for EVENT DATA */
+ TRB_EVENT_DATA, /* 7 */
+ /* Transfer Ring No-op (not for the command ring) */
+ TRB_TR_NOOP, /* 8 */
+ /* Command TRBs */
+ /* Enable Slot Command */
+ TRB_ENABLE_SLOT, /* 9 */
+ /* Disable Slot Command */
+ TRB_DISABLE_SLOT, /* 10 */
+ /* Address Device Command */
+ TRB_ADDR_DEV, /* 11 */
+ /* Configure Endpoint Command */
+ TRB_CONFIG_EP, /* 12 */
+ /* Evaluate Context Command */
+ TRB_EVAL_CONTEXT, /* 13 */
+ /* Reset Endpoint Command */
+ TRB_RESET_EP, /* 14 */
+ /* Stop Transfer Ring Command */
+ TRB_STOP_RING, /* 15 */
+ /* Set Transfer Ring Dequeue Pointer Command */
+ TRB_SET_DEQ, /* 16 */
+ /* Reset Device Command */
+ TRB_RESET_DEV, /* 17 */
+ /* Force Event Command (opt) */
+ TRB_FORCE_EVENT, /* 18 */
+ /* Negotiate Bandwidth Command (opt) */
+ TRB_NEG_BANDWIDTH, /* 19 */
+ /* Set Latency Tolerance Value Command (opt) */
+ TRB_SET_LT, /* 20 */
+ /* Get port bandwidth Command */
+ TRB_GET_BW, /* 21 */
+ /* Force Header Command - generate a transaction or link management packet */
+ TRB_FORCE_HEADER, /* 22 */
+ /* No-op Command - not for transfer rings */
+ TRB_CMD_NOOP, /* 23 */
+ /* TRB IDs 24-31 reserved */
+ /* Event TRBS */
+ /* Transfer Event */
+ TRB_TRANSFER = 32,
+ /* Command Completion Event */
+ TRB_COMPLETION, /* 33 */
+ /* Port Status Change Event */
+ TRB_PORT_STATUS, /* 34 */
+ /* Bandwidth Request Event (opt) */
+ TRB_BANDWIDTH_EVENT, /* 35 */
+ /* Doorbell Event (opt) */
+ TRB_DOORBELL, /* 36 */
+ /* Host Controller Event */
+ TRB_HC_EVENT, /* 37 */
+ /* Device Notification Event - device sent function wake notification */
+ TRB_DEV_NOTE, /* 38 */
+ /* MFINDEX Wrap Event - microframe counter wrapped */
+ TRB_MFINDEX_WRAP, /* 39 */
+ /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+ /* Nec vendor-specific command completion event. */
+ TRB_NEC_CMD_COMP = 48, /* 48 */
+ /* Get NEC firmware revision. */
+ TRB_NEC_GET_FW, /* 49 */
+} trb_type;
+
+#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+/* Above, but for __le32 types -- can avoid work by swapping constants: */
+#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+ cpu_to_le32(TRB_TYPE(TRB_LINK)))
+#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+ cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT 64
+/* Allow two commands + a link TRB, along with any reserved command TRBs */
+#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
+#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
+/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE).
+ * Change this if you change TRBS_PER_SEGMENT!
+ */
+#define SEGMENT_SHIFT 10
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT 16
+#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
+
+struct xhci_segment {
+ union xhci_trb *trbs;
+ /* private to HCD */
+ struct xhci_segment *next;
+};
+
+struct xhci_ring {
+ struct xhci_segment *first_seg;
+ union xhci_trb *enqueue;
+ struct xhci_segment *enq_seg;
+ union xhci_trb *dequeue;
+ struct xhci_segment *deq_seg;
+ /*
+ * Write the cycle state into the TRB cycle field to give ownership of
+ * the TRB to the host controller (if we are the producer), or to check
+ * if we own the TRB (if we are the consumer). See section 4.9.1.
+ */
+ volatile u32 cycle_state;
+ unsigned int num_segs;
+};
+
+struct xhci_erst_entry {
+ /* 64-bit event ring segment address */
+ __le64 seg_addr;
+ __le32 seg_size;
+ /* Set to zero */
+ __le32 rsvd;
+};
+
+struct xhci_erst {
+ struct xhci_erst_entry *entries;
+ unsigned int num_entries;
+ /* Num entries the ERST can contain */
+ unsigned int erst_size;
+};
+
+/*
+ * Each segment table entry is 4*32bits long. 1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define ERST_NUM_SEGS 3
+/* Initial number of event segment rings allocated */
+#define ERST_ENTRIES 3
+/* Initial allocated size of the ERST, in number of entries */
+#define ERST_SIZE 64
+/* Poll every 60 seconds */
+#define POLL_TIMEOUT 60
+/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
+#define XHCI_STOP_EP_CMD_TIMEOUT 5
+/* XXX: Make these module parameters */
+
+struct xhci_virt_ep {
+ struct xhci_ring *ring;
+ unsigned int ep_state;
+#define SET_DEQ_PENDING (1 << 0)
+#define EP_HALTED (1 << 1) /* For stall handling */
+#define EP_HALT_PENDING (1 << 2) /* For URB cancellation */
+/* Transitioning the endpoint to using streams, don't enqueue URBs */
+#define EP_GETTING_STREAMS (1 << 3)
+#define EP_HAS_STREAMS (1 << 4)
+/* Transitioning the endpoint to not using streams, don't enqueue URBs */
+#define EP_GETTING_NO_STREAMS (1 << 5)
+};
+
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_virt_device {
+ struct usb_device *udev;
+ /*
+ * Commands to the hardware are passed an "input context" that
+ * tells the hardware what to change in its data structures.
+ * The hardware will return changes in an "output context" that
+ * software must allocate for the hardware. We need to keep
+ * track of input and output contexts separately because
+ * these commands might fail and we don't trust the hardware.
+ */
+ struct xhci_container_ctx *out_ctx;
+ /* Used for addressing devices and configuration changes */
+ struct xhci_container_ctx *in_ctx;
+ /* Rings saved to ensure old alt settings can be re-instated */
+#define XHCI_MAX_RINGS_CACHED 31
+ struct xhci_virt_ep eps[31];
+};
+
+/* TODO: copied from ehci.h - can be refactored? */
+/* xHCI spec says all registers are little endian */
+static inline unsigned int xhci_readl(uint32_t volatile *regs)
+{
+ return readl(regs);
+}
+
+static inline void xhci_writel(uint32_t volatile *regs, const unsigned int val)
+{
+ writel(val, regs);
+}
+
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_readq(__le64 volatile *regs)
+{
+ __u32 *ptr = (__u32 *)regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+
+static inline void xhci_writeq(__le64 volatile *regs, const u64 val)
+{
+ __u32 *ptr = (__u32 *)regs;
+ u32 val_lo = lower_32_bits(val);
+ /* FIXME */
+ u32 val_hi = 0;
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
+ struct xhci_hcor **ret_hcor);
+void xhci_hcd_stop(int index);
+
+
+/*************************************************************
+ EXTENDED CAPABILITY DEFINITIONS
+*************************************************************/
+/* Up to 16 ms to halt an HC */
+#define XHCI_MAX_HALT_USEC (16*1000)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT (1 << 0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET 0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET 0x00
+#define XHCI_STS_OFFSET 0x04
+
+#define XHCI_MAX_EXT_CAPS 50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p) (((p) >> 00) & 0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p) (((p) >> 0) & 0xff)
+#define XHCI_EXT_CAPS_NEXT(p) (((p) >> 8) & 0xff)
+#define XHCI_EXT_CAPS_VAL(p) ((p) >> 16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY 1
+#define XHCI_EXT_CAPS_PROTOCOL 2
+#define XHCI_EXT_CAPS_PM 3
+#define XHCI_EXT_CAPS_VIRT 4
+#define XHCI_EXT_CAPS_ROUTE 5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG 10
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED (1 << 16)
+#define XHCI_HC_OS_OWNED (1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET (0x00)
+
+/* USB Legacy Support Control and Status Register - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
+/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+
+/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
+#define XHCI_L1C (1 << 16)
+
+/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
+#define XHCI_HLC (1 << 19)
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN (1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE (1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE (1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE (1 << 10)
+
+#define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR (1 << 11)
+
+struct xhci_ctrl {
+ struct xhci_hccr *hccr; /* R/O registers, not need for volatile */
+ struct xhci_hcor *hcor;
+ struct xhci_doorbell_array *dba;
+ struct xhci_run_regs *run_regs;
+ struct xhci_device_context_array *dcbaa \
+ __attribute__ ((aligned(ARCH_DMA_MINALIGN)));
+ struct xhci_ring *event_ring;
+ struct xhci_ring *cmd_ring;
+ struct xhci_ring *transfer_ring;
+ struct xhci_segment *seg;
+ struct xhci_intr_reg *ir_set;
+ struct xhci_erst erst;
+ struct xhci_erst_entry entry[ERST_NUM_SEGS];
+ struct xhci_virt_device *devs[MAX_HC_SLOTS];
+ int rootdev;
+};
+
+unsigned long trb_addr(struct xhci_segment *seg, union xhci_trb *trb);
+struct xhci_input_control_ctx
+ *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *ctx,
+ unsigned int ep_index);
+void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx,
+ unsigned int ep_index);
+void xhci_slot_copy(struct xhci_ctrl *ctrl,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx);
+void xhci_setup_addressable_virt_dev(struct usb_device *udev);
+void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr,
+ u32 slot_id, u32 ep_index, trb_type cmd);
+void xhci_acknowledge_event(struct xhci_ctrl *ctrl);
+union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected);
+int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
+ int length, void *buffer);
+int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
+ struct devrequest *req, int length, void *buffer);
+int xhci_check_maxpacket(struct usb_device *udev);
+void xhci_flush_cache(uint32_t addr, u32 type_len);
+void xhci_inval_cache(uint32_t addr, u32 type_len);
+void xhci_cleanup(struct xhci_ctrl *ctrl);
+struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs);
+int xhci_alloc_virt_device(struct usb_device *udev);
+int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
+ struct xhci_hcor *hcor);
+
+#endif /* HOST_XHCI_H_ */
struct usb_device *children[USB_MAXCHILDREN];
void *controller; /* hardware controller private data */
+ /* slot_id - for xHCI enabled devices */
+ unsigned int slot_id;
};
/**********************************************************************
defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
- defined(CONFIG_USB_MUSB_OMAP2PLUS)
+ defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
int usb_lowlevel_init(int index, void **controller);
int usb_lowlevel_stop(int index);
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
+#define usb_pipe_ep_index(pipe) \
+ usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \
+ ((usb_pipeendpoint(pipe) * 2) - \
+ (usb_pipein(pipe) ? 0 : 1))
/*************************************************************************
* Hub Stuff
int usb_new_device(struct usb_device *dev);
void usb_free_device(void);
+int usb_alloc_device(struct usb_device *dev);
#endif /*_USB_H_ */
projects / karo-tx-uboot.git / commitdiff