]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
serial: UniPhier: use 32 bit register access
authorMasahiro Yamada <yamada.m@jp.panasonic.com>
Thu, 26 Feb 2015 17:26:46 +0000 (02:26 +0900)
committerLothar Waßmann <LW@KARO-electronics.de>
Tue, 1 Sep 2015 12:06:21 +0000 (14:06 +0200)
For PH1-Pro4, the 8 bit write access to LCR register (offset = 0x11)
is not working correctly.  As a side effect, it also modifies MCR
register (offset = 0x10) and results in unexpected behavior.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
drivers/serial/serial_uniphier.c

index e8a1608b9988c193c1c860795730ecced5b4c107..327e0dc517bc38bbaae0bb7082dc7a727d6d9b94 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2012-2015 Panasonic Corporation
  *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
  *
  * SPDX-License-Identifier:    GPL-2.0+
 #include <serial.h>
 #include <fdtdec.h>
 
-#define UART_REG(x)                                    \
-       u8 x;                                           \
-       u8 postpad_##x[3];
-
 /*
  * Note: Register map is slightly different from that of 16550.
  */
 struct uniphier_serial {
-       UART_REG(rbr);          /* 0x00 */
-       UART_REG(ier);          /* 0x04 */
-       UART_REG(iir);          /* 0x08 */
-       UART_REG(fcr);          /* 0x0c */
-       u8 mcr;                 /* 0x10 */
-       u8 lcr;
-       u16 __postpad;
-       UART_REG(lsr);          /* 0x14 */
-       UART_REG(msr);          /* 0x18 */
-       u32 __none1;
-       u32 __none2;
-       u16 dlr;
-       u16 __postpad2;
+       u32 rx;                 /* In:  Receive buffer */
+#define tx rx                  /* Out: Transmit buffer */
+       u32 ier;                /* Interrupt Enable Register */
+       u32 iir;                /* In: Interrupt ID Register */
+       u32 char_fcr;           /* Charactor / FIFO Control Register */
+       u32 lcr_mcr;            /* Line/Modem Control Register */
+#define LCR_SHIFT      8
+#define LCR_MASK       (0xff << (LCR_SHIFT))
+       u32 lsr;                /* In: Line Status Register */
+       u32 msr;                /* In: Modem Status Register */
+       u32 __rsv0;
+       u32 __rsv1;
+       u32 dlr;                /* Divisor Latch Register */
 };
 
-#define thr rbr
-
 struct uniphier_serial_private_data {
        struct uniphier_serial __iomem *membase;
 };
@@ -51,12 +45,16 @@ static int uniphier_serial_setbrg(struct udevice *dev, int baudrate)
        struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
        const unsigned int mode_x_div = 16;
        unsigned int divisor;
+       u32 tmp;
 
-       writeb(UART_LCR_WLEN8, &port->lcr);
+       tmp = readl(&port->lcr_mcr);
+       tmp &= ~LCR_MASK;
+       tmp |= UART_LCR_WLEN8 << LCR_SHIFT;
+       writel(tmp, &port->lcr_mcr);
 
        divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate);
 
-       writew(divisor, &port->dlr);
+       writel(divisor, &port->dlr);
 
        return 0;
 }
@@ -65,20 +63,20 @@ static int uniphier_serial_getc(struct udevice *dev)
 {
        struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 
-       if (!(readb(&port->lsr) & UART_LSR_DR))
+       if (!(readl(&port->lsr) & UART_LSR_DR))
                return -EAGAIN;
 
-       return readb(&port->rbr);
+       return readl(&port->rx);
 }
 
 static int uniphier_serial_putc(struct udevice *dev, const char c)
 {
        struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 
-       if (!(readb(&port->lsr) & UART_LSR_THRE))
+       if (!(readl(&port->lsr) & UART_LSR_THRE))
                return -EAGAIN;
 
-       writeb(c, &port->thr);
+       writel(c, &port->tx);
 
        return 0;
 }
@@ -88,9 +86,9 @@ static int uniphier_serial_pending(struct udevice *dev, bool input)
        struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 
        if (input)
-               return readb(&port->lsr) & UART_LSR_DR;
+               return readl(&port->lsr) & UART_LSR_DR;
        else
-               return !(readb(&port->lsr) & UART_LSR_THRE);
+               return !(readl(&port->lsr) & UART_LSR_THRE);
 }
 
 static int uniphier_serial_probe(struct udevice *dev)