--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and OMAP3 SDP code by
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/clocks_omap3.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <environment.h>
+#include <command.h>
+
+/******************************************************************************
+ * get_sys_clk_speed() - determine reference oscillator speed
+ * based on known 32kHz clock and gptimer.
+ *****************************************************************************/
+u32 get_osc_clk_speed(void)
+{
+ u32 start, cstart, cend, cdiff, val;
+ prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
+ prm_t *prm_base = (prm_t *)PRM_BASE;
+ gptimer_t *gpt1_base = (gptimer_t *)OMAP34XX_GPT1;
+ s32ktimer_t *s32k_base = (s32ktimer_t *)SYNC_32KTIMER_BASE;
+
+ val = readl(&prm_base->clksrc_ctrl);
+
+ /* If SYS_CLK is being divided by 2, remove for now */
+ val = (val & (~SYSCLKDIV_2)) | SYSCLKDIV_1;
+ writel(val, &prm_base->clksrc_ctrl);
+
+ /* enable timer2 */
+ val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1;
+
+ /* select sys_clk for GPT1 */
+ writel(val, &prcm_base->clksel_wkup);
+
+ /* Enable I and F Clocks for GPT1 */
+ val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC;
+ writel(val, &prcm_base->iclken_wkup);
+ val = readl(&prcm_base->fclken_wkup) | EN_GPT1;
+ writel(val, &prcm_base->fclken_wkup);
+
+ writel(0, &gpt1_base->tldr); /* start counting at 0 */
+ writel(GPT_EN, &gpt1_base->tclr); /* enable clock */
+
+ /* enable 32kHz source, determine sys_clk via gauging */
+
+ /* start time in 20 cycles */
+ start = 20 + readl(&s32k_base->s32k_cr);
+
+ /* dead loop till start time */
+ while (readl(&s32k_base->s32k_cr) < start);
+
+ /* get start sys_clk count */
+ cstart = readl(&gpt1_base->tcrr);
+
+ /* wait for 40 cycles */
+ while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
+ cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */
+ cdiff = cend - cstart; /* get elapsed ticks */
+
+ /* based on number of ticks assign speed */
+ if (cdiff > 19000)
+ return S38_4M;
+ else if (cdiff > 15200)
+ return S26M;
+ else if (cdiff > 13000)
+ return S24M;
+ else if (cdiff > 9000)
+ return S19_2M;
+ else if (cdiff > 7600)
+ return S13M;
+ else
+ return S12M;
+}
+
+/******************************************************************************
+ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
+ * input oscillator clock frequency.
+ *****************************************************************************/
+void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
+{
+ switch(osc_clk) {
+ case S38_4M:
+ *sys_clkin_sel = 4;
+ break;
+ case S26M:
+ *sys_clkin_sel = 3;
+ break;
+ case S19_2M:
+ *sys_clkin_sel = 2;
+ break;
+ case S13M:
+ *sys_clkin_sel = 1;
+ break;
+ case S12M:
+ default:
+ *sys_clkin_sel = 0;
+ }
+}
+
+/******************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ * called from SRAM, or Flash (using temp SRAM stack).
+ *****************************************************************************/
+void prcm_init(void)
+{
+ void (*f_lock_pll) (u32, u32, u32, u32);
+ int xip_safe, p0, p1, p2, p3;
+ u32 osc_clk = 0, sys_clkin_sel;
+ u32 clk_index, sil_index;
+ prm_t *prm_base = (prm_t *)PRM_BASE;
+ prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
+ dpll_param *dpll_param_p;
+
+ f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
+ SRAM_VECT_CODE);
+
+ xip_safe = is_running_in_sram();
+
+ /*
+ * Gauge the input clock speed and find out the sys_clkin_sel
+ * value corresponding to the input clock.
+ */
+ osc_clk = get_osc_clk_speed();
+ get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+
+ /* set input crystal speed */
+ sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
+
+ /* If the input clock is greater than 19.2M always divide/2 */
+ if (sys_clkin_sel > 2) {
+ /* input clock divider */
+ sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
+ clk_index = sys_clkin_sel / 2;
+ } else {
+ /* input clock divider */
+ sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
+ clk_index = sys_clkin_sel;
+ }
+
+ /*
+ * The DPLL tables are defined according to sysclk value and
+ * silicon revision. The clk_index value will be used to get
+ * the values for that input sysclk from the DPLL param table
+ * and sil_index will get the values for that SysClk for the
+ * appropriate silicon rev.
+ */
+ sil_index = get_cpu_rev() - 1;
+
+ /* Unlock MPU DPLL (slows things down, and needed later) */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY);
+
+ /* Getting the base address of Core DPLL param table */
+ dpll_param_p = (dpll_param *) get_core_dpll_param();
+
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+ if (xip_safe) {
+ /*
+ * CORE DPLL
+ * sr32(CM_CLKSEL2_EMU) set override to work when asleep
+ */
+ sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
+ LDELAY);
+
+ /*
+ * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't
+ * work. write another value and then default value.
+ */
+
+ /* m3x2 */
+ sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1);
+ /* m3x2 */
+ sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
+ /* Set M2 */
+ sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2);
+ /* Set M */
+ sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m);
+ /* Set N */
+ sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n);
+ /* 96M Src */
+ sr32(&prcm_base->clksel1_pll, 6, 1, 0);
+ /* ssi */
+ sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
+ /* fsusb */
+ sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
+ /* l4 */
+ sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
+ /* l3 */
+ sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
+ /* gfx */
+ sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
+ /* reset mgr */
+ sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
+ /* FREQSEL */
+ sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel);
+ /* lock mode */
+ sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
+
+ wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
+ LDELAY);
+ } else if (is_running_in_flash()) {
+ /*
+ * if running from flash, jump to small relocated code
+ * area in SRAM.
+ */
+ p0 = readl(&prcm_base->clken_pll);
+ sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */
+
+ p1 = readl(&prcm_base->clksel1_pll);
+ sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */
+ sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */
+ sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */
+ sr32(&p1, 6, 1, 0); /* set source for 96M */
+
+ p2 = readl(&prcm_base->clksel_core);
+ sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */
+ sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */
+ sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */
+ sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */
+
+ p3 = (u32)&prcm_base->idlest_ckgen;
+
+ (*f_lock_pll) (p0, p1, p2, p3);
+ }
+
+ /* PER DPLL */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
+ wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+
+ /* Getting the base address to PER DPLL param table */
+
+ /* Set N */
+ dpll_param_p = (dpll_param *) get_per_dpll_param();
+
+ /* Moving it to the right sysclk base */
+ dpll_param_p = dpll_param_p + clk_index;
+
+ /*
+ * Errata 1.50 Workaround for OMAP3 ES1.0 only
+ * If using default divisors, write default divisor + 1
+ * and then the actual divisor value
+ */
+ sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */
+ sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */
+ sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */
+ sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */
+ sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */
+ sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */
+ sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */
+ sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */
+ sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */
+ sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */
+ /* Workaround end */
+
+ sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */
+ sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */
+ sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
+
+ /* Getting the base address to MPU DPLL param table */
+ dpll_param_p = (dpll_param *) get_mpu_dpll_param();
+
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+
+ /* MPU DPLL (unlocked already) */
+
+ /* Set M2 */
+ sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2);
+ /* Set M */
+ sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m);
+ /* Set N */
+ sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n);
+ /* FREQSEL */
+ sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel);
+ /* lock mode */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
+ wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY);
+
+ /* Getting the base address to IVA DPLL param table */
+ dpll_param_p = (dpll_param *) get_iva_dpll_param();
+
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+
+ /* IVA DPLL (set to 12*20=240MHz) */
+ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
+ wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
+ /* set M2 */
+ sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2);
+ /* set M */
+ sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m);
+ /* set N */
+ sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n);
+ /* FREQSEL */
+ sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel);
+ /* lock mode */
+ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
+ wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
+
+ /* Set up GPTimers to sys_clk source only */
+ sr32(&prcm_base->clksel_per, 0, 8, 0xff);
+ sr32(&prcm_base->clksel_wkup, 0, 1, 1);
+
+ sdelay(5000);
+}
+
+/******************************************************************************
+ * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...)
+ *****************************************************************************/
+void per_clocks_enable(void)
+{
+ prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
+
+ /* Enable GP2 timer. */
+ sr32(&prcm_base->clksel_per, 0, 1, 0x1); /* GPT2 = sys clk */
+ sr32(&prcm_base->iclken_per, 3, 1, 0x1); /* ICKen GPT2 */
+ sr32(&prcm_base->fclken_per, 3, 1, 0x1); /* FCKen GPT2 */
+
+#ifdef CONFIG_SYS_NS16550
+ /* Enable UART1 clocks */
+ sr32(&prcm_base->fclken1_core, 13, 1, 0x1);
+ sr32(&prcm_base->iclken1_core, 13, 1, 0x1);
+
+ /* UART 3 Clocks */
+ sr32(&prcm_base->fclken_per, 11, 1, 0x1);
+ sr32(&prcm_base->iclken_per, 11, 1, 0x1);
+#endif
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ /* Turn on all 3 I2C clocks */
+ sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
+ sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */
+#endif
+ /* Enable the ICLK for 32K Sync Timer as its used in udelay */
+ sr32(&prcm_base->iclken_wkup, 2, 1, 0x1);
+
+ sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON);
+ sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON);
+ sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON);
+ sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON);
+ sr32(&prcm_base->fclken_wkup, 0, 32, FCK_WKUP_ON);
+ sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON);
+ sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON);
+ sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON);
+ sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
+ sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
+ sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
+ sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
+
+ sdelay(1000);
+}
--- /dev/null
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Initial Code by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks_omap3.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3 - r10} /* copy from source address [r0] */
+ stmia r1!, {r3 - r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/* ***************************************************************************
+ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * R0 = CM_CLKEN_PLL-bypass value
+ * R1 = CM_CLKSEL1_PLL-m, n, and divider values
+ * R2 = CM_CLKSEL_CORE-divider values
+ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ *
+ * Note: If core unlocks/relocks and SDRAM is running fast already it gets
+ * confused. A reset of the controller gets it back. Taking away its
+ * L3 when its not in self refresh seems bad for it. Normally, this
+ * code runs from flash before SDR is init so that should be ok.
+ ****************************************************************************/
+.global go_to_speed
+ go_to_speed:
+ stmfd sp!, {r4 - r6}
+
+ /* move into fast relock bypass */
+ ldr r4, pll_ctl_add
+ str r0, [r4]
+wait1:
+ ldr r5, [r3] /* get status */
+ and r5, r5, #0x1 /* isolate core status */
+ cmp r5, #0x1 /* still locked? */
+ beq wait1 /* if lock, loop */
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r5, pll_div_add1
+ str r1, [r5] /* set m, n, m2 */
+ ldr r5, pll_div_add2
+ str r2, [r5] /* set l3/l4/.. dividers*/
+ ldr r5, pll_div_add3 /* wkup */
+ ldr r2, pll_div_val3 /* rsm val */
+ str r2, [r5]
+ ldr r5, pll_div_add4 /* gfx */
+ ldr r2, pll_div_val4
+ str r2, [r5]
+ ldr r5, pll_div_add5 /* emu */
+ ldr r2, pll_div_val5
+ str r2, [r5]
+
+ /* now prepare GPMC (flash) for new dpll speed */
+ /* flash needs to be stable when we jump back to it */
+ ldr r5, flash_cfg3_addr
+ ldr r2, flash_cfg3_val
+ str r2, [r5]
+ ldr r5, flash_cfg4_addr
+ ldr r2, flash_cfg4_val
+ str r2, [r5]
+ ldr r5, flash_cfg5_addr
+ ldr r2, flash_cfg5_val
+ str r2, [r5]
+ ldr r5, flash_cfg1_addr
+ ldr r2, [r5]
+ orr r2, r2, #0x3 /* up gpmc divider */
+ str r2, [r5]
+
+ /* lock DPLL3 and wait a bit */
+ orr r0, r0, #0x7 /* set up for lock mode */
+ str r0, [r4] /* lock */
+ nop /* ARM slow at this point working at sys_clk */
+ nop
+ nop
+ nop
+wait2:
+ ldr r5, [r3] /* get status */
+ and r5, r5, #0x1 /* isolate core status */
+ cmp r5, #0x1 /* still locked? */
+ bne wait2 /* if lock, loop */
+ nop
+ nop
+ nop
+ nop
+ ldmfd sp!, {r4 - r6}
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+/* The Nor has to be in the Flash Base CS0 for this condition to happen */
+flash_cfg1_addr:
+ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
+flash_cfg3_addr:
+ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
+flash_cfg3_val:
+ .word STNOR_GPMC_CONFIG3
+flash_cfg4_addr:
+ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
+flash_cfg4_val:
+ .word STNOR_GPMC_CONFIG4
+flash_cfg5_val:
+ .word STNOR_GPMC_CONFIG5
+flash_cfg5_addr:
+ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_div_add1:
+ .word CM_CLKSEL1_PLL
+pll_div_add2:
+ .word CM_CLKSEL_CORE
+pll_div_add3:
+ .word CM_CLKSEL_WKUP
+pll_div_val3:
+ .word (WKUP_RSM << 1)
+pll_div_add4:
+ .word CM_CLKSEL_GFX
+pll_div_val4:
+ .word (GFX_DIV << 0)
+pll_div_add5:
+ .word CM_CLKSEL1_EMU
+pll_div_val5:
+ .word CLSEL1_EMU_VAL
+
+#endif
+
+.globl lowlevel_init
+lowlevel_init:
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ bl s_init /* go setup pll, mux, memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+REG_CONTROL_STATUS:
+ .word CONTROL_STATUS
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
+
+/* DPLL(1-4) PARAM TABLES */
+
+/*
+ * Each of the tables has M, N, FREQSEL, M2 values defined for nominal
+ * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c).
+ * The values are defined for all possible sysclk and for ES1 and ES2.
+ */
+
+mpu_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1
+/* ES2 */
+.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2
+/* 3410 */
+.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1
+/* ES2 */
+.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2
+/* 3410 */
+.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1
+/* ES2 */
+.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2
+/* 3410 */
+.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1
+/* ES2 */
+.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2
+/* 3410 */
+.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1
+/* ES2 */
+.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2
+/* 3410 */
+.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4
+
+
+.globl get_mpu_dpll_param
+get_mpu_dpll_param:
+ adr r0, mpu_dpll_param
+ mov pc, lr
+
+iva_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1
+/* ES2 */
+.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2
+/* 3410 */
+.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1
+/* ES2 */
+.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2
+/* 3410 */
+.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1
+/* ES2 */
+.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2
+/* 3410 */
+.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1
+/* ES2 */
+.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2
+/* 3410 */
+.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1
+/* ES2 */
+.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2
+/* 3410 */
+.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4
+
+
+.globl get_iva_dpll_param
+get_iva_dpll_param:
+ adr r0, iva_dpll_param
+ mov pc, lr
+
+/* Core DPLL targets for L3 at 166 & L133 */
+core_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1
+/* ES2 */
+.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
+/* 3410 */
+.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1
+/* ES2 */
+.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
+/* 3410 */
+.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1
+/* ES2 */
+.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
+/* 3410 */
+.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1
+/* ES2 */
+.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
+/* 3410 */
+.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1
+/* ES2 */
+.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
+/* 3410 */
+.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
+
+.globl get_core_dpll_param
+get_core_dpll_param:
+ adr r0, core_dpll_param
+ mov pc, lr
+
+/* PER DPLL values are same for both ES1 and ES2 */
+per_dpll_param:
+/* 12MHz */
+.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12
+
+/* 13MHz */
+.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13
+
+/* 19.2MHz */
+.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2
+
+/* 26MHz */
+.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26
+
+/* 38.4MHz */
+.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4
+
+.globl get_per_dpll_param
+get_per_dpll_param:
+ adr r0, per_dpll_param
+ mov pc, lr
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Initial Code from:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <command.h>
+
+/*
+ * Only One NAND allowed on board at a time.
+ * The GPMC CS Base for the same
+ */
+unsigned int boot_flash_base;
+unsigned int boot_flash_off;
+unsigned int boot_flash_sec;
+unsigned int boot_flash_type;
+volatile unsigned int boot_flash_env_addr;
+
+#if defined(CONFIG_CMD_NAND)
+static u32 gpmc_m_nand[GPMC_MAX_REG] = {
+ M_NAND_GPMC_CONFIG1,
+ M_NAND_GPMC_CONFIG2,
+ M_NAND_GPMC_CONFIG3,
+ M_NAND_GPMC_CONFIG4,
+ M_NAND_GPMC_CONFIG5,
+ M_NAND_GPMC_CONFIG6, 0
+};
+
+gpmc_csx_t *nand_cs_base;
+gpmc_t *gpmc_cfg_base;
+
+#if defined(CONFIG_ENV_IS_IN_NAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+static u32 gpmc_onenand[GPMC_MAX_REG] = {
+ ONENAND_GPMC_CONFIG1,
+ ONENAND_GPMC_CONFIG2,
+ ONENAND_GPMC_CONFIG3,
+ ONENAND_GPMC_CONFIG4,
+ ONENAND_GPMC_CONFIG5,
+ ONENAND_GPMC_CONFIG6, 0
+};
+
+gpmc_csx_t *onenand_cs_base;
+
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
+
+/**************************************************************************
+ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
+ * command line mem=xyz use all memory with out discontinuous support
+ * compiled in. Could do it at the ATAG, but there really is two banks...
+ * Called as part of 2nd phase DDR init.
+ **************************************************************************/
+void make_cs1_contiguous(void)
+{
+ u32 size, a_add_low, a_add_high;
+
+ size = get_sdr_cs_size(CS0);
+ size /= SZ_32M; /* find size to offset CS1 */
+ a_add_high = (size & 3) << 8; /* set up low field */
+ a_add_low = (size & 0x3C) >> 2; /* set up high field */
+ writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
+
+}
+
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in guessing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(u32 cs)
+{
+ u32 val1, val2, addr;
+ u32 pattern = 0x12345678;
+
+ addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+
+ writel(0x0, addr + 0x400); /* clear pos A */
+ writel(pattern, addr); /* pattern to pos B */
+ writel(0x0, addr + 4); /* remove pattern off the bus */
+ val1 = readl(addr + 0x400); /* get pos A value */
+ val2 = readl(addr); /* get val2 */
+
+ if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */
+ return 0;
+ else
+ return 1;
+}
+
+/********************************************************
+ * sdrc_init() - init the sdrc chip selects CS0 and CS1
+ * - early init routines, called from flash or
+ * SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+ /* only init up first bank here */
+ do_sdrc_init(CS0, EARLY_INIT);
+}
+
+/*************************************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ * -code sets up SDRAM basic SDRC timings for CS0
+ * -optimal settings can be placed here, or redone after i2c
+ * inspection of board info
+ *
+ * - code called once in C-Stack only context for CS0 and a possible 2nd
+ * time depending on memory configuration from stack+global context
+ **************************************************************************/
+
+void do_sdrc_init(u32 cs, u32 early)
+{
+ sdrc_actim_t *sdrc_actim_base;
+
+ if(cs)
+ sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL1_BASE;
+ else
+ sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL0_BASE;
+
+ if (early) {
+ /* reset sdrc controller */
+ writel(SOFTRESET, &sdrc_base->sysconfig);
+ wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
+ 12000000);
+ writel(0, &sdrc_base->sysconfig);
+
+ /* setup sdrc to ball mux */
+ writel(SDP_SDRC_SHARING, &sdrc_base->sharing);
+
+ /* Disable Power Down of CKE cuz of 1 CKE on combo part */
+ writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power);
+
+ writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
+ sdelay(0x20000);
+ }
+
+ writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
+ RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
+ DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
+ writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
+ writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
+ writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
+
+ writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
+ writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+
+ /*
+ * CAS latency 3, Write Burst = Read Burst, Serial Mode,
+ * Burst length = 4
+ */
+ writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
+
+ if (!mem_ok(cs))
+ writel(0, &sdrc_base->cs[cs].mcfg);
+}
+
+void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base, u32 base,
+ u32 size)
+{
+ writel(0, &gpmc_cs_base->config7);
+ sdelay(1000);
+ /* Delay for settling */
+ writel(gpmc_config[0], &gpmc_cs_base->config1);
+ writel(gpmc_config[1], &gpmc_cs_base->config2);
+ writel(gpmc_config[2], &gpmc_cs_base->config3);
+ writel(gpmc_config[3], &gpmc_cs_base->config4);
+ writel(gpmc_config[4], &gpmc_cs_base->config5);
+ writel(gpmc_config[5], &gpmc_cs_base->config6);
+ /* Enable the config */
+ writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
+ (1 << 6)), &gpmc_cs_base->config7);
+ sdelay(2000);
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+ /* putting a blanket check on GPMC based on ZeBu for now */
+ u32 *gpmc_config = NULL;
+ gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE;
+ gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
+ u32 base = 0;
+ u32 size = 0;
+ u32 f_off = CONFIG_SYS_MONITOR_LEN;
+ u32 f_sec = 0;
+ u32 config = 0;
+
+ /* global settings */
+ writel(0, &gpmc_base->irqenable); /* isr's sources masked */
+ writel(0, &gpmc_base->timeout_control);/* timeout disable */
+
+ config = readl(&gpmc_base->config);
+ config &= (~0xf00);
+ writel(config, &gpmc_base->config);
+
+ /*
+ * Disable the GPMC0 config set by ROM code
+ * It conflicts with our MPDB (both at 0x08000000)
+ */
+ writel(0, &gpmc_cs_base->config7);
+ sdelay(1000);
+
+#if defined(CONFIG_CMD_NAND) /* CS 0 */
+ gpmc_config = gpmc_m_nand;
+ gpmc_cfg_base = gpmc_base;
+ nand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
+ (GPMC_CS * GPMC_CONFIG_WIDTH));
+ base = PISMO1_NAND_BASE;
+ size = PISMO1_NAND_SIZE;
+ enable_gpmc_config(gpmc_config, nand_cs_base, base, size);
+#if defined(CONFIG_ENV_IS_IN_NAND)
+ f_off = SMNAND_ENV_OFFSET;
+ f_sec = SZ_128K;
+ /* env setup */
+ boot_flash_base = base;
+ boot_flash_off = f_off;
+ boot_flash_sec = f_sec;
+ boot_flash_env_addr = f_off;
+#endif
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+ gpmc_config = gpmc_onenand;
+ onenand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
+ (GPMC_CS * GPMC_CONFIG_WIDTH));
+ base = PISMO1_ONEN_BASE;
+ size = PISMO1_ONEN_SIZE;
+ enable_gpmc_config(gpmc_config, onenand_cs_base, base, size);
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+ f_off = ONENAND_ENV_OFFSET;
+ f_sec = SZ_128K;
+ /* env setup */
+ boot_flash_base = base;
+ boot_flash_off = f_off;
+ boot_flash_sec = f_sec;
+ boot_flash_env_addr = f_off;
+#endif
+#endif
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+
+/************************************************************
+ * sdelay() - simple spin loop. Will be constant time as
+ * its generally used in bypass conditions only. This
+ * is necessary until timers are accessible.
+ *
+ * not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/*****************************************************************
+ * sr32 - clear & set a value in a bit range for a 32 bit address
+ *****************************************************************/
+void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
+{
+ u32 tmp, msk = 0;
+ msk = 1 << num_bits;
+ --msk;
+ tmp = readl((u32)addr) & ~(msk << start_bit);
+ tmp |= value << start_bit;
+ writel(tmp, (u32)addr);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ * volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
+ u32 bound)
+{
+ u32 i = 0, val;
+ do {
+ ++i;
+ val = readl((u32)read_addr) & read_bit_mask;
+ if (val == match_value)
+ return 1;
+ if (i == bound)
+ return 0;
+ } while (1);
+}
projects / karo-tx-uboot.git / commitdiff