endmenu # General setup
+menuconfig EXPERT
+ bool "Configure standard U-Boot features (expert users)"
+ help
+ This option allows certain base U-Boot options and settings
+ to be disabled or tweaked. This is for specialized
+ environments which can tolerate a "non-standard" U-Boot.
+ Only use this if you really know what you are doing.
+
menu "Boot images"
config SPL_BUILD
help
If you want to build TPL as well as the normal image and SPL, say Y.
+config FIT
+ bool "Support Flattened Image Tree"
+ depends on !SPL_BUILD
+ help
+ This option allows to boot the new uImage structrure,
+ Flattened Image Tree. FIT is formally a FDT, which can include
+ images of various types (kernel, FDT blob, ramdisk, etc.)
+ in a single blob. To boot this new uImage structure,
+ pass the the address of the blob to the "bootm" command.
+
+config FIT_VERBOSE
+ bool "Display verbose messages on FIT boot"
+ depends on FIT
+
+config FIT_SIGNATURE
+ bool "Enabel signature verification of FIT uImages"
+ depends on FIT
+ help
+ This option enables signature verification of FIT uImages,
+ using a hash signed and verified using RSA.
+ See doc/uImage.FIT/signature.txt for more details.
+
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
depends on !SPL_BUILD
VERSION = 2015
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
libs-y += lib/
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-y += $(CPUDIR)/
-ifdef SOC
-libs-y += $(CPUDIR)/$(SOC)/
-endif
libs-$(CONFIG_OF_EMBED) += dts/
libs-y += arch/$(ARCH)/lib/
libs-y += fs/
endif
ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
+# We can't do this yet due to the need for binary blobs
+# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_SPL),y)
u-boot.hex u-boot.srec: u-boot FORCE
$(call if_changed,objcopy)
-OBJCOPYFLAGS_u-boot.bin := -O binary
+OBJCOPYFLAGS_u-boot.bin := -O binary \
+ $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
binary_size_check: u-boot.bin FORCE
@file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
$(call if_changed,mkimage)
@dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
+# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
+# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
+# the middle.
+ifneq ($(CONFIG_X86_RESET_VECTOR),)
+rom: u-boot.rom FORCE
+
+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
+ $(srctree)/board/$(BOARDDIR)/mrc.bin
+ $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
+ if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
+ $(objtree)/tools/ifdtool -D \
+ $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
+ $(objtree)/tools/ifdtool \
+ -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
+ fi
+ $(objtree)/tools/ifdtool -w \
+ $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
+ $(objtree)/tools/ifdtool -w \
+ $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
+ u-boot.tmp
+ $(objtree)/tools/ifdtool -w \
+ $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
+ u-boot.tmp
+ mv u-boot.tmp $@
+
+OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
+u-boot-x86-16bit.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+endif
+
ifneq ($(CONFIG_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
exists, unlike the similar options in the Linux kernel. Do not
set these options unless they apply!
+- Driver Model
+ Driver model is a new framework for devices in U-Boot
+ introduced in early 2014. U-Boot is being progressively
+ moved over to this. It offers a consistent device structure,
+ supports grouping devices into classes and has built-in
+ handling of platform data and device tree.
+
+ To enable transition to driver model in a relatively
+ painful fashion, each subsystem can be independently
+ switched between the legacy/ad-hoc approach and the new
+ driver model using the options below. Also, many uclass
+ interfaces include compatibility features which may be
+ removed once the conversion of that subsystem is complete.
+ As a result, the API provided by the subsystem may in fact
+ not change with driver model.
+
+ See doc/driver-model/README.txt for more information.
+
+ CONFIG_DM
+
+ Enable driver model. This brings in the core support,
+ including scanning of platform data on start-up. If
+ CONFIG_OF_CONTROL is enabled, the device tree will be
+ scanned also when available.
+
+ CONFIG_CMD_DM
+
+ Enable driver model test commands. These allow you to print
+ out the driver model tree and the uclasses.
+
+ CONFIG_DM_DEMO
+
+ Enable some demo devices and the 'demo' command. These are
+ really only useful for playing around while trying to
+ understand driver model in sandbox.
+
+ CONFIG_SPL_DM
+
+ Enable driver model in SPL. You will need to provide a
+ suitable malloc() implementation. If you are not using the
+ full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
+ consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
+ must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ In most cases driver model will only allocate a few uclasses
+ and devices in SPL, so 1KB should be enable. See
+ CONFIG_SYS_MALLOC_F_LEN for more details on how to enable
+ it.
+
+ CONFIG_DM_SERIAL
+
+ Enable driver model for serial. This replaces
+ drivers/serial/serial.c with the serial uclass, which
+ implements serial_putc() etc. The uclass interface is
+ defined in include/serial.h.
+
+ CONFIG_DM_GPIO
+
+ Enable driver model for GPIO access. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
+
+ CONFIG_DM_SPI
+
+ Enable driver model for SPI. The SPI slave interface
+ (spi_setup_slave(), spi_xfer(), etc.) is then implemented by
+ the SPI uclass. Drivers provide methods to access the SPI
+ buses that they control. The uclass interface is defined in
+ include/spi.h. The existing spi_slave structure is attached
+ as 'parent data' to every slave on each bus. Slaves
+ typically use driver-private data instead of extending the
+ spi_slave structure.
+
+ CONFIG_DM_SPI_FLASH
+
+ Enable driver model for SPI flash. This SPI flash interface
+ (spi_flash_probe(), spi_flash_write(), etc.) is then
+ implemented by the SPI flash uclass. There is one standard
+ SPI flash driver which knows how to probe most chips
+ supported by U-Boot. The uclass interface is defined in
+ include/spi_flash.h, but is currently fully compatible
+ with the old interface to avoid confusion and duplication
+ during the transition parent. SPI and SPI flash must be
+ enabled together (it is not possible to use driver model
+ for one and not the other).
+
+ CONFIG_DM_CROS_EC
+
+ Enable driver model for the Chrome OS EC interface. This
+ allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
+ but otherwise makes few changes. Since cros_ec also supports
+ I2C and LPC (which don't support driver model yet), a full
+ conversion is not yet possible.
+
+
+ ** Code size options: The following options are enabled by
+ default except in SPL. Enable them explicitly to get these
+ features in SPL.
+
+ CONFIG_DM_WARN
+
+ Enable the dm_warn() function. This can use up quite a bit
+ of space for its strings.
+
+ CONFIG_DM_STDIO
+
+ Enable registering a serial device with the stdio library.
+
+ CONFIG_DM_DEVICE_REMOVE
+
+ Enable removing of devices.
+
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
+ CONFIG_OF_SYSTEM_SETUP
+
+ Other code has addition modification that it wants to make
+ to the flat device tree before handing it off to the kernel.
+ This causes ft_system_setup() to be called before booting
+ the kernel.
+
CONFIG_OF_BOOT_CPU
This define fills in the correct boot CPU in the boot
CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls)
that work for multiple fs types
+ CONFIG_CMD_FS_UUID * Look up a filesystem UUID
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
CONFIG_CMD_FAT * FAT command support
Enable auto completion of commands using TAB.
- CONFIG_SYS_HUSH_PARSER
-
- Define this variable to enable the "hush" shell (from
- Busybox) as command line interpreter, thus enabling
- powerful command line syntax like
- if...then...else...fi conditionals or `&&' and '||'
- constructs ("shell scripts").
-
- If undefined, you get the old, much simpler behaviour
- with a somewhat smaller memory footprint.
-
-
CONFIG_SYS_PROMPT_HUSH_PS2
This defines the secondary prompt string, which is
to 128 or 256, although it does not have to be power of 2).
default: 4096
-
+
CONFIG_MTD_UBI_BEB_LIMIT
This option specifies the maximum bad physical eraseblocks UBI
expects on the MTD device (per 1024 eraseblocks). If the
Support for the MTD subsystem within SPL. Useful for
environment on NAND support within SPL.
+ CONFIG_SPL_NAND_RAW_ONLY
+ Support to boot only raw u-boot.bin images. Use this only
+ if you need to save space.
+
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
Set for the SPL on PPC mpc8xxx targets, support for
drivers/ddr/fsl/libddr.o in SPL binary.
Pre-relocation malloc() is only supported on ARM and sandbox
at present but is fairly easy to enable for other archs.
+- CONFIG_SYS_MALLOC_SIMPLE
+ Provides a simple and small malloc() and calloc() for those
+ boards which do not use the full malloc in SPL (which is
+ enabled with CONFIG_SYS_SPL_MALLOC_START).
+
- CONFIG_SYS_BOOTM_LEN:
Normally compressed uImages are limited to an
uncompressed size of 8 MBytes. If this is not enough,
select CPU_ARM926EJS
config TARGET_CORVUS
+ select SUPPORT_SPL
bool "Support corvus"
select CPU_ARM926EJS
config TARGET_TAURUS
+ select SUPPORT_SPL
bool "Support taurus"
select CPU_ARM926EJS
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
config TARGET_VEXPRESS_CA5X2
bool "Support vexpress_ca5x2"
select CPU_V7
select SUPPORT_SPL
+config TARGET_SAMA5D4_XPLAINED
+ bool "Support sama5d4_xplained"
+ select CPU_V7
+
+config TARGET_SAMA5D4EK
+ bool "Support sama5d4ek"
+ select CPU_V7
+
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
-config TARGET_BCM958300K
- bool "Support bcm958300k"
+config TARGET_BCMCYGNUS
+ bool "Support bcmcygnus"
select CPU_V7
-config TARGET_BCM958622HR
- bool "Support bcm958622hr"
+config TARGET_BCMNSP
+ bool "Support bcmnsp"
select CPU_V7
config ARCH_EXYNOS
source "arch/arm/cpu/armv7/zynq/Kconfig"
+source "arch/arm/cpu/armv7/Kconfig"
+
source "board/aristainetos/Kconfig"
source "board/BuR/kwb/Kconfig"
source "board/BuR/tseries/Kconfig"
source "board/atmel/at91sam9x5ek/Kconfig"
source "board/atmel/sama5d3_xplained/Kconfig"
source "board/atmel/sama5d3xek/Kconfig"
+source "board/atmel/sama5d4_xplained/Kconfig"
+source "board/atmel/sama5d4ek/Kconfig"
source "board/bachmann/ot1200/Kconfig"
source "board/balloon3/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/bluewater/snapper9260/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
-source "board/broadcom/bcm958300k/Kconfig"
-source "board/broadcom/bcm958622hr/Kconfig"
+source "board/broadcom/bcmcygnus/Kconfig"
+source "board/broadcom/bcmnsp/Kconfig"
source "board/calao/sbc35_a9g20/Kconfig"
source "board/calao/tny_a9260/Kconfig"
source "board/calao/usb_a9263/Kconfig"
extra-y = start.o
obj-y = cpu.o
+
+obj-$(CONFIG_MX31) += mx31/
+obj-$(CONFIG_MX35) += mx35/
extra-y = start.o
obj-y = cpu.o
+
+obj-$(CONFIG_BCM2835) += bcm2835/
+obj-$(CONFIG_TNETV107X) += tnetv107x/
#define BIT(x) (1 << (x))
#define MAX_PREDIV 64
-#define MAX_POSTDIV 8
+#define MAX_POSTDIV 8UL
#define MAX_MULT 512
#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV)
pllctl_reg_write(data->pll, ctl, tmp);
mult = data->pll_freq / fpll;
- for (mult = max(mult, 1); mult <= MAX_MULT; mult++) {
+ for (mult = max(mult, 1UL); mult <= MAX_MULT; mult++) {
div = (fpll * mult) / data->pll_freq;
if (div < 1 || div > MAX_DIV)
continue;
obj-y = interrupts.o cpu.o
obj-$(CONFIG_TEGRA) += tegra-common/
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_TEGRA30) += tegra30/
+obj-$(CONFIG_TEGRA114) += tegra114/
+obj-$(CONFIG_TEGRA124) += tegra124/
obj-y += cpu.o
obj-$(CONFIG_USE_IRQ) += interrupts.o
+
+obj-$(if $(filter a320,$(SOC)),y) += a320/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(CONFIG_EP93XX) += ep93xx/
+obj-$(CONFIG_IMX) += imx/
+obj-$(CONFIG_KS8695) += ks8695/
+obj-$(CONFIG_S3C24X0) += s3c24x0/
extra-y :=
endif
endif
+
+obj-$(CONFIG_ARMADA100) += armada100/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(CONFIG_ARCH_DAVINCI) += davinci/
+obj-$(CONFIG_KIRKWOOD) += kirkwood/
+obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
+obj-$(CONFIG_MB86R0x) += mb86r0x/
+obj-$(CONFIG_MX25) += mx25/
+obj-$(CONFIG_MX27) += mx27/
+obj-$(if $(filter mxs,$(SOC)),y) += mxs/
+obj-$(CONFIG_ARCH_NOMADIK) += nomadik/
+obj-$(CONFIG_ORION5X) += orion5x/
+obj-$(CONFIG_PANTHEON) += pantheon/
+obj-$(if $(filter spear,$(SOC)),y) += spear/
+obj-$(CONFIG_ARCH_VERSATILE) += versatile/
*/
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91sam9_sdramc.h>
#include <asm/arch/gpio.h>
/*
#endif
}
#endif
+
+void at91_sdram_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 19, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 20, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 21, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 22, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 23, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 24, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 25, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 26, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 27, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 28, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 29, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 30, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 31, 0);
+}
+
+/* Platform data for the GPIOs */
+static const struct at91_port_platdata at91sam9260_plat[] = {
+ { ATMEL_BASE_PIOA, "PA" },
+ { ATMEL_BASE_PIOB, "PB" },
+ { ATMEL_BASE_PIOC, "PC" },
+};
+
+U_BOOT_DEVICES(at91sam9260_gpios) = {
+ { "gpio_at91", &at91sam9260_plat[0] },
+ { "gpio_at91", &at91sam9260_plat[1] },
+ { "gpio_at91", &at91sam9260_plat[2] },
+};
return 0;
}
+
+#if !defined(AT91_PLL_LOCK_TIMEOUT)
+#define AT91_PLL_LOCK_TIMEOUT 1000000
+#endif
+
+void at91_plla_init(u32 pllar)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+
+ writel(pllar, &pmc->pllar);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+void at91_pllb_init(u32 pllbr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+
+ writel(pllbr, &pmc->pllbr);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKB | AT91_PMC_MCKRDY))) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+
+void at91_mck_init(u32 mckr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+ u32 tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_MASK |
+ AT91_PMC_MCKR_CSS_MASK);
+ tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_MASK |
+ AT91_PMC_MCKR_CSS_MASK);
+ writel(tmp, &pmc->mckr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+
+void at91_periph_clk_enable(int id)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(1 << id, &pmc->pcer);
+}
# SPDX-License-Identifier: GPL-2.0+
obj-y = generic.o reset.o timer.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += relocate.o
+endif
--- /dev/null
+/*
+ * relocate - i.MX27-specific vector relocation
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * The i.MX27 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM. Therefore, vectors cannot be changed at all.
+ *
+ * However, these ROM-based vectors actually just perform indirect
+ * calls through pointers located in RAM at SoC-specific addresses,
+ * as follows:
+ *
+ * Offset Exception Use by ROM code
+ * 0x00000000 reset indirect branch to [0x00000014]
+ * 0x00000004 undefined instruction indirect branch to [0xfffffef0]
+ * 0x00000008 software interrupt indirect branch to [0xfffffef4]
+ * 0x0000000c prefetch abort indirect branch to [0xfffffef8]
+ * 0x00000010 data abort indirect branch to [0xfffffefc]
+ * 0x00000014 (reserved in ARMv5) vector to ROM reset: 0xc0000000
+ * 0x00000018 IRQ indirect branch to [0xffffff00]
+ * 0x0000001c FIQ indirect branch to [0xffffff04]
+ *
+ * In order to initialize exceptions on i.MX27, we must copy U-Boot's
+ * indirect (not exception!) vector table into 0xfffffef0..0xffffff04
+ * taking care not to copy vectors number 5 (reserved exception).
+ */
+
+ .section .text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ ldr r1, =32 /* size of vector table */
+ add r0, r0, r1 /* skip to indirect table */
+ ldr r1, =0xFFFFFEF0 /* i.MX27 indirect table */
+ ldmia r0!, {r2-r8} /* load indirect vectors 1..7 */
+ stmia r1!, {r2-r5, r7,r8} /* write all but vector 5 */
+
+ bx lr
+
+ENDPROC(relocate_vectors)
+DISPLAYPROGRESS
SECTION 0x0 BOOTABLE
TAG LAST
LOAD 0x1000 spl/u-boot-spl.bin
+DISPLAYPROGRESS
SECTION 0x0 BOOTABLE
TAG LAST
LOAD 0x1000 spl/u-boot-spl.bin
+DISPLAYPROGRESS
SECTION 0x0 BOOTABLE
TAG LAST
LOAD 0x1000 spl/u-boot-spl.bin
uint32_t powered_by_linreg = 0;
int adjust_up, tmp;
- new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV);
+ new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
+ cfg->step_mV);
cur_target = readl(cfg->reg);
cur_target &= cfg->trg_mask;
--- /dev/null
+if CPU_V7
+
+config CPU_V7_HAS_NONSEC
+ bool
+
+config CPU_V7_HAS_VIRT
+ bool
+
+config ARMV7_NONSEC
+ boolean "Enable support for booting in non-secure mode" if EXPERT
+ depends on CPU_V7_HAS_NONSEC
+ default y
+ ---help---
+ Say Y here to enable support for booting in non-secure / SVC mode.
+
+config ARMV7_BOOT_SEC_DEFAULT
+ boolean "Boot in secure mode by default" if EXPERT
+ depends on ARMV7_NONSEC
+ default n
+ ---help---
+ Say Y here to boot in secure mode by default even if non-secure mode
+ is supported. This option is useful to boot kernels which do not
+ suppport booting in non-secure mode. Only set this if you need it.
+ This can be overriden at run-time by setting the bootm_boot_mode env.
+ variable to "sec" or "nonsec".
+
+config ARMV7_VIRT
+ boolean "Enable support for hardware virtualization" if EXPERT
+ depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
+ default y
+ ---help---
+ Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
+
+endif
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
obj-y += s5p-common/
endif
+
+obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
+obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
+obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
+obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
+obj-$(CONFIG_ARCH_EXYNOS) += exynos/
+obj-$(CONFIG_ARCH_HIGHBANK) += highbank/
+obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
+obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
+obj-$(if $(filter mx5,$(SOC)),y) += mx5/
+obj-$(CONFIG_MX6) += mx6/
+obj-$(CONFIG_OMAP34XX) += omap3/
+obj-$(CONFIG_OMAP44XX) += omap4/
+obj-$(CONFIG_OMAP54XX) += omap5/
+obj-$(CONFIG_RMOBILE) += rmobile/
+obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
+obj-$(CONFIG_SOCFPGA) += socfpga/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_U8500) += u8500/
+obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
+obj-$(CONFIG_VF610) += vf610/
+obj-$(CONFIG_ZYNQ) += zynq/
#
obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o
+obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o
obj-y += clock.o
obj-y += cpu.o
obj-y += reset.o
return 0;
}
+void at91_plla_init(u32 pllar)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(pllar, &pmc->pllar);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
+ ;
+}
+
+void at91_mck_init(u32 mckr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~(AT91_PMC_MCKR_CSS_MASK |
+ AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
+ AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ writel(tmp, &pmc->mckr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+}
+
void at91_periph_clk_enable(int id)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
#
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_SPL_BUILD
-ALL-y += boot.bin
-else
+ifndef CONFIG_SPL_BUILD
ALL-y += u-boot.img
endif
--- /dev/null
+/*
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sama5d4.h>
+
+char *get_cpu_name()
+{
+ unsigned int extension_id = get_extension_chip_id();
+
+ if (cpu_is_sama5d4())
+ switch (extension_id) {
+ case ARCH_EXID_SAMA5D41:
+ return "SAMA5D41";
+ case ARCH_EXID_SAMA5D42:
+ return "SAMA5D42";
+ case ARCH_EXID_SAMA5D43:
+ return "SAMA5D43";
+ case ARCH_EXID_SAMA5D44:
+ return "SAMA5D44";
+ default:
+ return "Unknown CPU type";
+ }
+ else
+ return "Unknown CPU type";
+}
/* Enable PITC */
writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
- gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+ gd->arch.timer_rate_hz = get_pit_clk_rate() / 16;
+
gd->arch.tbu = 0;
gd->arch.tbl = 0;
struct refclk *refclk_str_to_clk(const char *name);
-#define U8_MAX ((u8)~0U)
-#define U32_MAX ((u32)~0U)
-#define U64_MAX ((u64)~0U)
-
/* The common clock framework uses u8 to represent a parent index */
#define PARENT_COUNT_MAX ((u32)U8_MAX)
config TARGET_ARNDALE
bool "Exynos5250 Arndale board"
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select OF_CONTROL if !SPL_BUILD
return 1;
for (i = 1; i <= loops; i++) {
- const unsigned int effective_div = max(min(input_rate / i /
- target_rate, cap), 1);
+ const unsigned int effective_div =
+ max(min(input_rate / i / target_rate, cap), 1U);
const unsigned int effective_rate = input_rate / i /
effective_div;
const int error = target_rate - effective_rate;
}
for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
- todo = min(uboot_size - upto, (1 << 15));
+ todo = min(uboot_size - upto, (unsigned int)(1 << 15));
spi_rx_tx(regs, todo, (void *)(uboot_addr),
(void *)(SPI_FLASH_UBOOT_POS), i);
}
}
#endif
-void set_chipselect_size(int const cs_size)
-{
- unsigned int reg;
- struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- reg = readl(&iomuxc_regs->gpr1);
-
- switch (cs_size) {
- case CS0_128:
- reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */
- reg |= 0x5;
- break;
- case CS0_64M_CS1_64M:
- reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */
- reg |= 0x1B;
- break;
- case CS0_64M_CS1_32M_CS2_32M:
- reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */
- reg |= 0x4B;
- break;
- case CS0_32M_CS1_32M_CS2_32M_CS3_32M:
- reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */
- reg |= 0x249;
- break;
- default:
- printf("Unknown chip select size: %d\n", cs_size);
- break;
- }
-
- writel(reg, &iomuxc_regs->gpr1);
-}
-
#ifdef CONFIG_MX53
void boot_mode_apply(unsigned cfg_val)
{
ungate_sata_clock();
return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
}
+
+void disable_sata_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
#endif
int enable_pcie_clock(void)
}
#endif
+static void enable_pll3(void)
+{
+ struct anatop_regs __iomem *anatop =
+ (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+ /* make sure pll3 is enabled */
+ if ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
+ /* enable pll's power */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
+ &anatop->usb1_pll_480_ctrl_set);
+ writel(0x80, &anatop->ana_misc2_clr);
+ /* wait for pll lock */
+ while ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
+ ;
+ /* disable bypass */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
+ &anatop->usb1_pll_480_ctrl_clr);
+ /* enable pll output */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
+ &anatop->usb1_pll_480_ctrl_set);
+ }
+}
+
+void enable_thermal_clk(void)
+{
+ enable_pll3();
+}
+
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <asm/bootm.h>
+#include <dm.h>
+#include <imx_thermal.h>
enum ldo_reg {
LDO_ARM,
u32 fpga_rev;
};
+#if defined(CONFIG_IMX6_THERMAL)
+static const struct imx_thermal_plat imx6_thermal_plat = {
+ .regs = (void *)ANATOP_BASE_ADDR,
+ .fuse_bank = 1,
+ .fuse_word = 6,
+};
+
+U_BOOT_DEVICE(imx6_thermal) = {
+ .name = "imx_thermal",
+ .platdata = &imx6_thermal_plat,
+};
+#endif
+
u32 get_nr_cpus(void)
{
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
*/
/* calculate SR2_WTCNT_VALUE */
- sys_rate = DIV_ROUND(V_OSCK, 1000000);
- clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
- sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+ sys_rate = DIV_ROUND_CLOSEST(V_OSCK, 1000000);
+ clk_cycles = DIV_ROUND_CLOSEST(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+ sr2_cnt = DIV_ROUND_CLOSEST(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
setbits_le32(setup,
sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
return ret;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
/* On OMAP platforms SATA provides the SCSI subsystem */
void scsi_init(void)
{
config TARGET_ARMADILLO_800EVA
bool "armadillo 800 eva board"
+config TARGET_GOSE
+ bool "Gose board"
+
config TARGET_KOELSCH
bool "Koelsch board"
default n
source "board/atmark-techno/armadillo-800eva/Kconfig"
+source "board/renesas/gose/Kconfig"
source "board/renesas/koelsch/Kconfig"
source "board/renesas/lager/Kconfig"
source "board/kmc/kzm9g/Kconfig"
obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7790.o
obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7791.o
+obj-$(CONFIG_R8A7793) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7793.o
obj-$(CONFIG_R8A7794) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7794.o
obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o
{ 0x40, "R8A7740" },
{ 0x45, "R8A7790" },
{ 0x47, "R8A7791" },
+ { 0x4B, "R8A7793" },
{ 0x4C, "R8A7794" },
{ 0x0, "CPU" },
};
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7793.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+
+#define CPU_32_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx), \
+ PORT_1(fn, pfx##31, sfx)
+
+#define CPU_32_PORT1(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx), \
+ PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx), \
+ PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx)
+
+/*
+ * GP_0_0_DATA -> GP_7_25_DATA
+ * (except for GP1[26],GP1[27],GP1[28],GP1[29]),GP1[30]),GP1[31]
+ * GP7[26],GP7[27],GP7[28],GP7[29]),GP7[30]),GP7[31])
+ */
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ CPU_32_PORT(fn, pfx##_0_, sfx), \
+ CPU_32_PORT1(fn, pfx##_1_, sfx), \
+ CPU_32_PORT(fn, pfx##_2_, sfx), \
+ CPU_32_PORT(fn, pfx##_3_, sfx), \
+ CPU_32_PORT(fn, pfx##_4_, sfx), \
+ CPU_32_PORT(fn, pfx##_5_, sfx), \
+ CPU_32_PORT(fn, pfx##_6_, sfx), \
+ CPU_32_PORT1(fn, pfx##_7_, sfx)
+
+#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA)
+#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN, \
+ GP##pfx##_IN, GP##pfx##_OUT)
+
+#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT
+#define _GP_INDT(pfx, sfx) GP##pfx##_DATA
+
+#define GP_ALL(str) CPU_ALL_PORT(_PORT_ALL, GP, str)
+#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, , unused)
+#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, , unused)
+
+
+#define PORT_10_REV(fn, pfx, sfx) \
+ PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx), \
+ PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx), \
+ PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx), \
+ PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx), \
+ PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx)
+
+#define CPU_32_PORT_REV(fn, pfx, sfx) \
+ PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx), \
+ PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx), \
+ PORT_10_REV(fn, pfx, sfx)
+
+#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused)
+#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused)
+
+#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
+#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
+ FN_##ipsr, FN_##fn)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ GP_ALL(DATA),
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ GP_ALL(IN),
+ PINMUX_INPUT_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ GP_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ GP_ALL(FN),
+
+ /* GPSR0 */
+ FN_IP0_0, FN_IP0_1, FN_IP0_2, FN_IP0_3, FN_IP0_4, FN_IP0_5,
+ FN_IP0_6, FN_IP0_7, FN_IP0_8, FN_IP0_9, FN_IP0_10, FN_IP0_11,
+ FN_IP0_12, FN_IP0_13, FN_IP0_14, FN_IP0_15, FN_IP0_18_16, FN_IP0_20_19,
+ FN_IP0_22_21, FN_IP0_24_23, FN_IP0_26_25, FN_IP0_28_27, FN_IP0_30_29,
+ FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4, FN_IP1_7_6, FN_IP1_10_8,
+ FN_IP1_13_11, FN_IP1_16_14, FN_IP1_19_17, FN_IP1_22_20,
+
+ /* GPSR1 */
+ FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0, FN_IP2_4_3,
+ FN_IP2_6_5, FN_IP2_9_7, FN_IP2_12_10, FN_IP2_15_13, FN_IP2_18_16,
+ FN_IP2_20_19, FN_IP2_22_21, FN_EX_CS0_N, FN_IP2_24_23, FN_IP2_26_25,
+ FN_IP2_29_27, FN_IP3_2_0, FN_IP3_5_3, FN_IP3_8_6, FN_RD_N,
+ FN_IP3_11_9, FN_IP3_13_12, FN_IP3_15_14 , FN_IP3_17_16 , FN_IP3_19_18,
+ FN_IP3_21_20,
+
+ /* GPSR2 */
+ FN_IP3_27_25, FN_IP3_30_28, FN_IP4_1_0, FN_IP4_4_2, FN_IP4_7_5,
+ FN_IP4_9_8, FN_IP4_12_10, FN_IP4_15_13, FN_IP4_18_16, FN_IP4_19,
+ FN_IP4_20, FN_IP4_21, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
+ FN_IP4_30_28, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_8_6, FN_IP5_11_9,
+ FN_IP5_14_12, FN_IP5_16_15, FN_IP5_19_17, FN_IP5_21_20, FN_IP5_23_22,
+ FN_IP5_25_24, FN_IP5_28_26, FN_IP5_31_29, FN_AUDIO_CLKA, FN_IP6_2_0,
+ FN_IP6_5_3, FN_IP6_7_6,
+
+ /* GPSR3 */
+ FN_IP7_5_3, FN_IP7_8_6, FN_IP7_10_9, FN_IP7_12_11, FN_IP7_14_13,
+ FN_IP7_16_15, FN_IP7_18_17, FN_IP7_20_19, FN_IP7_23_21, FN_IP7_26_24,
+ FN_IP7_29_27, FN_IP8_2_0, FN_IP8_5_3, FN_IP8_8_6, FN_IP8_11_9,
+ FN_IP8_14_12, FN_IP8_17_15, FN_IP8_20_18, FN_IP8_23_21, FN_IP8_25_24,
+ FN_IP8_27_26, FN_IP8_30_28, FN_IP9_2_0, FN_IP9_5_3, FN_IP9_6, FN_IP9_7,
+ FN_IP9_10_8, FN_IP9_11, FN_IP9_12, FN_IP9_15_13, FN_IP9_16,
+ FN_IP9_18_17,
+
+ /* GPSR4 */
+ FN_VI0_CLK, FN_IP9_20_19, FN_IP9_22_21, FN_IP9_24_23, FN_IP9_26_25,
+ FN_VI0_DATA0_VI0_B0, FN_VI0_DATA0_VI0_B1, FN_VI0_DATA0_VI0_B2,
+ FN_IP9_28_27, FN_VI0_DATA0_VI0_B4, FN_VI0_DATA0_VI0_B5,
+ FN_VI0_DATA0_VI0_B6, FN_VI0_DATA0_VI0_B7, FN_IP9_31_29, FN_IP10_2_0,
+ FN_IP10_5_3, FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_16_15,
+ FN_IP10_18_17, FN_IP10_21_19, FN_IP10_24_22, FN_IP10_26_25,
+ FN_IP10_28_27, FN_IP10_31_29, FN_IP11_2_0, FN_IP11_5_3, FN_IP11_8_6,
+ FN_IP15_1_0, FN_IP15_3_2, FN_IP15_5_4,
+
+ /* GPSR5 */
+ FN_IP11_11_9, FN_IP11_14_12, FN_IP11_16_15, FN_IP11_18_17, FN_IP11_19,
+ FN_IP11_20, FN_IP11_21, FN_IP11_22, FN_IP11_23, FN_IP11_24,
+ FN_IP11_25, FN_IP11_26, FN_IP11_27, FN_IP11_29_28, FN_IP11_31_30,
+ FN_IP12_1_0, FN_IP12_3_2, FN_IP12_6_4, FN_IP12_9_7, FN_IP12_12_10,
+ FN_IP12_15_13, FN_IP12_17_16, FN_IP12_19_18, FN_IP12_21_20,
+ FN_IP12_23_22, FN_IP12_26_24, FN_IP12_29_27, FN_IP13_2_0, FN_IP13_4_3,
+ FN_IP13_6_5, FN_IP13_9_7, FN_IP3_24_22,
+
+ /* GPSR6 */
+ FN_IP13_10, FN_IP13_11, FN_IP13_12, FN_IP13_13, FN_IP13_14,
+ FN_IP13_15, FN_IP13_18_16, FN_IP13_21_19, FN_IP13_22, FN_IP13_24_23,
+ FN_IP13_25, FN_IP13_26, FN_IP13_27, FN_IP13_30_28, FN_IP14_1_0,
+ FN_IP14_2, FN_IP14_3, FN_IP14_4, FN_IP14_5, FN_IP14_6, FN_IP14_7,
+ FN_IP14_10_8, FN_IP14_13_11, FN_IP14_16_14, FN_IP14_19_17,
+ FN_IP14_22_20, FN_IP14_25_23, FN_IP14_28_26, FN_IP14_31_29,
+
+ /* GPSR7 */
+ FN_IP15_17_15, FN_IP15_20_18, FN_IP15_23_21, FN_IP15_26_24,
+ FN_IP15_29_27, FN_IP16_2_0, FN_IP16_5_3, FN_IP16_7_6, FN_IP16_9_8,
+ FN_IP16_11_10, FN_IP6_9_8, FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14,
+ FN_IP6_18_16, FN_IP6_20_19, FN_IP6_23_21, FN_IP6_26_24, FN_IP6_29_27,
+ FN_IP7_2_0, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_14_12,
+ FN_USB0_PWEN, FN_USB0_OVC, FN_USB1_PWEN,
+
+ /* IPSR 0 -5 */
+
+ /* IPSR6 */
+ FN_AUDIO_CLKB, FN_STP_OPWM_0_B, FN_MSIOF1_SCK_B,
+ FN_SCIF_CLK, FN_BPFCLK_E,
+ FN_AUDIO_CLKC, FN_SCIFB0_SCK_C, FN_MSIOF1_SYNC_B, FN_RX2,
+ FN_SCIFA2_RXD, FN_FMIN_E,
+ FN_AUDIO_CLKOUT, FN_MSIOF1_SS1_B, FN_TX2, FN_SCIFA2_TXD,
+ FN_IRQ0, FN_SCIFB1_RXD_D, FN_INTC_IRQ0_N,
+ FN_IRQ1, FN_SCIFB1_SCK_C, FN_INTC_IRQ1_N,
+ FN_IRQ2, FN_SCIFB1_TXD_D, FN_INTC_IRQ2_N,
+ FN_IRQ3, FN_SCL4_C, FN_MSIOF2_TXD_E, FN_INTC_IRQ3_N,
+ FN_IRQ4, FN_HRX1_C, FN_SDA4_C, FN_MSIOF2_RXD_E, FN_INTC_IRQ4_N,
+ FN_IRQ5, FN_HTX1_C, FN_SCL1_E, FN_MSIOF2_SCK_E,
+ FN_IRQ6, FN_HSCK1_C, FN_MSIOF1_SS2_B, FN_SDA1_E, FN_MSIOF2_SYNC_E,
+ FN_IRQ7, FN_HCTS1_N_C, FN_MSIOF1_TXD_B, FN_GPS_CLK_C, FN_GPS_CLK_D,
+ FN_IRQ8, FN_HRTS1_N_C, FN_MSIOF1_RXD_B, FN_GPS_SIGN_C, FN_GPS_SIGN_D,
+
+ /* IPSR7 - IPSR10 */
+
+ /* IPSR11 */
+ FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+ FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+ FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+ FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D,
+ FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B, FN_TX4_B, FN_SCIFA4_TXD_B,
+ FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B, FN_RX4_B, FN_SCIFA4_RXD_B,
+ FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B,
+ FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B,
+ FN_VI1_CLK, FN_AVB_RXD4, FN_VI1_DATA0, FN_AVB_RXD5,
+ FN_VI1_DATA1, FN_AVB_RXD6, FN_VI1_DATA2, FN_AVB_RXD7,
+ FN_VI1_DATA3, FN_AVB_RX_ER, FN_VI1_DATA4, FN_AVB_MDIO,
+ FN_VI1_DATA5, FN_AVB_RX_DV, FN_VI1_DATA6, FN_AVB_MAGIC,
+ FN_VI1_DATA7, FN_AVB_MDC,
+ FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C,
+ FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C,
+
+ /* IPSR12 */
+ FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7,
+ FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+ FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+ FN_SCL2_D, FN_MSIOF1_RXD_E,
+ FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C, FN_SDA2_D, FN_MSIOF1_SCK_E,
+ FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+ FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+ FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+ FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+ FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+ FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C,
+ FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C,
+ FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C,
+ FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+ FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+ FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+ FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+
+ /* IPSR13 */
+ FN_STP_ISD_0, FN_AVB_TX_ER, FN_SCIFB2_SCK_C,
+ FN_ADICLK_B, FN_MSIOF0_SS1_C,
+ FN_STP_ISEN_0, FN_AVB_TX_CLK, FN_ADICHS0_B, FN_MSIOF0_SS2_C,
+ FN_STP_ISSYNC_0, FN_AVB_COL, FN_ADICHS1_B, FN_MSIOF0_RXD_C,
+ FN_STP_OPWM_0, FN_AVB_GTX_CLK, FN_PWM0_B,
+ FN_ADICHS2_B, FN_MSIOF0_TXD_C,
+ FN_SD0_CLK, FN_SPCLK_B, FN_SD0_CMD, FN_MOSI_IO0_B,
+ FN_SD0_DATA0, FN_MISO_IO1_B, FN_SD0_DATA1, FN_IO2_B,
+ FN_SD0_DATA2, FN_IO3_B, FN_SD0_DATA3, FN_SSL_B,
+ FN_SD0_CD, FN_MMC_D6_B, FN_SIM0_RST_B, FN_CAN0_RX_F,
+ FN_SCIFA5_TXD_B, FN_TX3_C,
+ FN_SD0_WP, FN_MMC_D7_B, FN_SIM0_D_B, FN_CAN0_TX_F,
+ FN_SCIFA5_RXD_B, FN_RX3_C,
+ FN_SD1_CMD, FN_REMOCON_B, FN_SD1_DATA0, FN_SPEEDIN_B,
+ FN_SD1_DATA1, FN_IETX_B, FN_SD1_DATA2, FN_IECLK_B,
+ FN_SD1_DATA3, FN_IERX_B,
+ FN_SD1_CD, FN_PWM0, FN_TPU_TO0, FN_SCL1_C,
+
+ /* IPSR14 */
+ FN_SD1_WP, FN_PWM1_B, FN_SDA1_C,
+ FN_SD2_CLK, FN_MMC_CLK, FN_SD2_CMD, FN_MMC_CMD,
+ FN_SD2_DATA0, FN_MMC_D0, FN_SD2_DATA1, FN_MMC_D1,
+ FN_SD2_DATA2, FN_MMC_D2, FN_SD2_DATA3, FN_MMC_D3,
+ FN_SD2_CD, FN_MMC_D4, FN_SCL8_C, FN_TX5_B, FN_SCIFA5_TXD_C,
+ FN_SD2_WP, FN_MMC_D5, FN_SDA8_C, FN_RX5_B, FN_SCIFA5_RXD_C,
+ FN_MSIOF0_SCK, FN_RX2_C, FN_ADIDATA, FN_VI1_CLK_C, FN_VI1_G0_B,
+ FN_MSIOF0_SYNC, FN_TX2_C, FN_ADICS_SAMP, FN_VI1_CLKENB_C, FN_VI1_G1_B,
+ FN_MSIOF0_TXD, FN_ADICLK, FN_VI1_FIELD_C, FN_VI1_G2_B,
+ FN_MSIOF0_RXD, FN_ADICHS0, FN_VI1_DATA0_C, FN_VI1_G3_B,
+ FN_MSIOF0_SS1, FN_MMC_D6, FN_ADICHS1, FN_TX0_E,
+ FN_VI1_HSYNC_N_C, FN_SCL7_C, FN_VI1_G4_B,
+ FN_MSIOF0_SS2, FN_MMC_D7, FN_ADICHS2, FN_RX0_E,
+ FN_VI1_VSYNC_N_C, FN_SDA7_C, FN_VI1_G5_B,
+
+ /* IPSR15 */
+ FN_SIM0_RST, FN_IETX, FN_CAN1_TX_D,
+ FN_SIM0_CLK, FN_IECLK, FN_CAN_CLK_C,
+ FN_SIM0_D, FN_IERX, FN_CAN1_RX_D,
+ FN_GPS_CLK, FN_DU1_DOTCLKIN_C, FN_AUDIO_CLKB_B,
+ FN_PWM5_B, FN_SCIFA3_TXD_C,
+ FN_GPS_SIGN, FN_TX4_C, FN_SCIFA4_TXD_C, FN_PWM5,
+ FN_VI1_G6_B, FN_SCIFA3_RXD_C,
+ FN_GPS_MAG, FN_RX4_C, FN_SCIFA4_RXD_C, FN_PWM6,
+ FN_VI1_G7_B, FN_SCIFA3_SCK_C,
+ FN_HCTS0_N, FN_SCIFB0_CTS_N, FN_GLO_I0_C, FN_TCLK1, FN_VI1_DATA1_C,
+ FN_HRTS0_N, FN_SCIFB0_RTS_N, FN_GLO_I1_C, FN_VI1_DATA2_C,
+ FN_HSCK0, FN_SCIFB0_SCK, FN_GLO_Q0_C, FN_CAN_CLK,
+ FN_TCLK2, FN_VI1_DATA3_C,
+ FN_HRX0, FN_SCIFB0_RXD, FN_GLO_Q1_C, FN_CAN0_RX_B, FN_VI1_DATA4_C,
+ FN_HTX0, FN_SCIFB0_TXD, FN_GLO_SCLK_C, FN_CAN0_TX_B, FN_VI1_DATA5_C,
+
+ /* IPSR16 */
+ FN_HRX1, FN_SCIFB1_RXD, FN_VI1_R0_B, FN_GLO_SDATA_C, FN_VI1_DATA6_C,
+ FN_HTX1, FN_SCIFB1_TXD, FN_VI1_R1_B, FN_GLO_SS_C, FN_VI1_DATA7_C,
+ FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CK, FN_GLO_RFON_C,
+ FN_HCTS1_N, FN_SCIFB1_CTS_N, FN_MLB_SIG, FN_CAN1_TX_B,
+ FN_HRTS1_N, FN_SCIFB1_RTS_N, FN_MLB_DAT, FN_CAN1_RX_B,
+
+ /* MOD_SEL */
+ FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+ FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+ FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+ FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+ FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2,
+ FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+ FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+ FN_SEL_QSP_0, FN_SEL_QSP_1,
+ FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+ FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2, FN_SEL_HSCIF1_3,
+ FN_SEL_HSCIF1_4,
+ FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2,
+ FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+ FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2,
+
+ /* MOD_SEL2 */
+ FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3,
+ FN_SEL_SCIF0_4,
+ FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+ FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+ FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+ FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+ FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+ FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2,
+ FN_SEL_ADG_0, FN_SEL_ADG_1,
+ FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, FN_SEL_FM_4,
+ FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2,
+ FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+ FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2,
+ FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2,
+ FN_SEL_SIM_0, FN_SEL_SIM_1,
+ FN_SEL_SSI8_0, FN_SEL_SSI8_1,
+
+ /* MOD_SEL3 */
+ FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1, FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+ FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+ FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2,
+ FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2,
+ FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2,
+ FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+ FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ FN_SEL_MMC_0, FN_SEL_MMC_1,
+ FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+ FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+ FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+ FN_SEL_IIC1_4,
+ FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2,
+
+ /* MOD_SEL4 */
+ FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+ FN_SEL_SOF1_4,
+ FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2,
+ FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2,
+ FN_SEL_RAD_0, FN_SEL_RAD_1,
+ FN_SEL_RCN_0, FN_SEL_RCN_1,
+ FN_SEL_RSP_0, FN_SEL_RSP_1,
+ FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
+ FN_SEL_SCIF2_4,
+ FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2, FN_SEL_SOF2_3,
+ FN_SEL_SOF2_4,
+ FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+ FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+ FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ EX_CS0_N_MARK, RD_N_MARK,
+
+ AUDIO_CLKA_MARK,
+
+ VI0_CLK_MARK, VI0_DATA0_VI0_B0_MARK, VI0_DATA0_VI0_B1_MARK,
+ VI0_DATA0_VI0_B2_MARK, VI0_DATA0_VI0_B4_MARK, VI0_DATA0_VI0_B5_MARK,
+ VI0_DATA0_VI0_B6_MARK, VI0_DATA0_VI0_B7_MARK,
+
+ USB0_PWEN_MARK, USB0_OVC_MARK, USB1_PWEN_MARK,
+
+ /* IPSR0 - 5 */
+
+ /* IPSR6 */
+ AUDIO_CLKB_MARK, STP_OPWM_0_B_MARK, MSIOF1_SCK_B_MARK,
+ SCIF_CLK_MARK, BPFCLK_E_MARK,
+ AUDIO_CLKC_MARK, SCIFB0_SCK_C_MARK, MSIOF1_SYNC_B_MARK, RX2_MARK,
+ SCIFA2_RXD_MARK, FMIN_E_MARK,
+ AUDIO_CLKOUT_MARK, MSIOF1_SS1_B_MARK, TX2_MARK, SCIFA2_TXD_MARK,
+ IRQ0_MARK, SCIFB1_RXD_D_MARK, INTC_IRQ0_N_MARK,
+ IRQ1_MARK, SCIFB1_SCK_C_MARK, INTC_IRQ1_N_MARK,
+ IRQ2_MARK, SCIFB1_TXD_D_MARK, INTC_IRQ2_N_MARK,
+ IRQ3_MARK, SCL4_C_MARK, MSIOF2_TXD_E_MARK, INTC_IRQ3_N_MARK,
+ IRQ4_MARK, HRX1_C_MARK, SDA4_C_MARK,
+ MSIOF2_RXD_E_MARK, INTC_IRQ4_N_MARK,
+ IRQ5_MARK, HTX1_C_MARK, SCL1_E_MARK, MSIOF2_SCK_E_MARK,
+ IRQ6_MARK, HSCK1_C_MARK, MSIOF1_SS2_B_MARK,
+ SDA1_E_MARK, MSIOF2_SYNC_E_MARK,
+ IRQ7_MARK, HCTS1_N_C_MARK, MSIOF1_TXD_B_MARK,
+ GPS_CLK_C_MARK, GPS_CLK_D_MARK,
+ IRQ8_MARK, HRTS1_N_C_MARK, MSIOF1_RXD_B_MARK,
+ GPS_SIGN_C_MARK, GPS_SIGN_D_MARK,
+
+ /* IPSR7 - 10 */
+
+ /* IPSR11 */
+ VI0_R5_MARK, VI2_DATA6_MARK, GLO_SDATA_B_MARK, RX0_C_MARK, SDA1_D_MARK,
+ VI0_R6_MARK, VI2_DATA7_MARK, GLO_SS_B_MARK, TX1_C_MARK, SCL4_B_MARK,
+ VI0_R7_MARK, GLO_RFON_B_MARK, RX1_C_MARK, CAN0_RX_E_MARK,
+ SDA4_B_MARK, HRX1_D_MARK, SCIFB0_RXD_D_MARK,
+ VI1_HSYNC_N_MARK, AVB_RXD0_MARK, TS_SDATA0_B_MARK,
+ TX4_B_MARK, SCIFA4_TXD_B_MARK,
+ VI1_VSYNC_N_MARK, AVB_RXD1_MARK, TS_SCK0_B_MARK,
+ RX4_B_MARK, SCIFA4_RXD_B_MARK,
+ VI1_CLKENB_MARK, AVB_RXD2_MARK, TS_SDEN0_B_MARK,
+ VI1_FIELD_MARK, AVB_RXD3_MARK, TS_SPSYNC0_B_MARK,
+ VI1_CLK_MARK, AVB_RXD4_MARK, VI1_DATA0_MARK, AVB_RXD5_MARK,
+ VI1_DATA1_MARK, AVB_RXD6_MARK, VI1_DATA2_MARK, AVB_RXD7_MARK,
+ VI1_DATA3_MARK, AVB_RX_ER_MARK, VI1_DATA4_MARK, AVB_MDIO_MARK,
+ VI1_DATA5_MARK, AVB_RX_DV_MARK, VI1_DATA6_MARK, AVB_MAGIC_MARK,
+ VI1_DATA7_MARK, AVB_MDC_MARK,
+ ETH_MDIO_MARK, AVB_RX_CLK_MARK, SCL2_C_MARK,
+ ETH_CRS_DV_MARK, AVB_LINK_MARK, SDA2_C_MARK,
+
+ /* IPSR12 */
+ ETH_RX_ER_MARK, AVB_CRS_MARK, SCL3_MARK, SCL7_MARK,
+ ETH_RXD0_MARK, AVB_PHY_INT_MARK, SDA3_MARK, SDA7_MARK,
+ ETH_RXD1_MARK, AVB_GTXREFCLK_MARK, CAN0_TX_C_MARK,
+ SCL2_D_MARK, MSIOF1_RXD_E_MARK,
+ ETH_LINK_MARK, AVB_TXD0_MARK, CAN0_RX_C_MARK,
+ SDA2_D_MARK, MSIOF1_SCK_E_MARK,
+ ETH_REFCLK_MARK, AVB_TXD1_MARK, SCIFA3_RXD_B_MARK,
+ CAN1_RX_C_MARK, MSIOF1_SYNC_E_MARK,
+ ETH_TXD1_MARK, AVB_TXD2_MARK, SCIFA3_TXD_B_MARK,
+ CAN1_TX_C_MARK, MSIOF1_TXD_E_MARK,
+ ETH_TX_EN_MARK, AVB_TXD3_MARK, TCLK1_B_MARK, CAN_CLK_B_MARK,
+ ETH_MAGIC_MARK, AVB_TXD4_MARK, IETX_C_MARK,
+ ETH_TXD0_MARK, AVB_TXD5_MARK, IECLK_C_MARK,
+ ETH_MDC_MARK, AVB_TXD6_MARK, IERX_C_MARK,
+ STP_IVCXO27_0_MARK, AVB_TXD7_MARK, SCIFB2_TXD_D_MARK,
+ ADIDATA_B_MARK, MSIOF0_SYNC_C_MARK,
+ STP_ISCLK_0_MARK, AVB_TX_EN_MARK, SCIFB2_RXD_D_MARK,
+ ADICS_SAMP_B_MARK, MSIOF0_SCK_C_MARK,
+
+ /* IPSR13 */
+ STP_ISD_0_MARK, AVB_TX_ER_MARK, SCIFB2_SCK_C_MARK,
+ ADICLK_B_MARK, MSIOF0_SS1_C_MARK,
+ STP_ISEN_0_MARK, AVB_TX_CLK_MARK, ADICHS0_B_MARK, MSIOF0_SS2_C_MARK,
+ STP_ISSYNC_0_MARK, AVB_COL_MARK, ADICHS1_B_MARK, MSIOF0_RXD_C_MARK,
+ STP_OPWM_0_MARK, AVB_GTX_CLK_MARK, PWM0_B_MARK,
+ ADICHS2_B_MARK, MSIOF0_TXD_C_MARK,
+ SD0_CLK_MARK, SPCLK_B_MARK, SD0_CMD_MARK, MOSI_IO0_B_MARK,
+ SD0_DATA0_MARK, MISO_IO1_B_MARK, SD0_DATA1_MARK, IO2_B_MARK,
+ SD0_DATA2_MARK, IO3_B_MARK, SD0_DATA3_MARK, SSL_B_MARK,
+ SD0_CD_MARK, MMC_D6_B_MARK, SIM0_RST_B_MARK, CAN0_RX_F_MARK,
+ SCIFA5_TXD_B_MARK, TX3_C_MARK,
+ SD0_WP_MARK, MMC_D7_B_MARK, SIM0_D_B_MARK, CAN0_TX_F_MARK,
+ SCIFA5_RXD_B_MARK, RX3_C_MARK,
+ SD1_CMD_MARK, REMOCON_B_MARK, SD1_DATA0_MARK, SPEEDIN_B_MARK,
+ SD1_DATA1_MARK, IETX_B_MARK, SD1_DATA2_MARK, IECLK_B_MARK,
+ SD1_DATA3_MARK, IERX_B_MARK,
+ SD1_CD_MARK, PWM0_MARK, TPU_TO0_MARK, SCL1_C_MARK,
+
+ /* IPSR14 */
+ SD1_WP_MARK, PWM1_B_MARK, SDA1_C_MARK,
+ SD2_CLK_MARK, MMC_CLK_MARK, SD2_CMD_MARK, MMC_CMD_MARK,
+ SD2_DATA0_MARK, MMC_D0_MARK, SD2_DATA1_MARK, MMC_D1_MARK,
+ SD2_DATA2_MARK, MMC_D2_MARK, SD2_DATA3_MARK, MMC_D3_MARK,
+ SD2_CD_MARK, MMC_D4_MARK, SCL8_C_MARK, TX5_B_MARK, SCIFA5_TXD_C_MARK,
+ SD2_WP_MARK, MMC_D5_MARK, SDA8_C_MARK, RX5_B_MARK, SCIFA5_RXD_C_MARK,
+ MSIOF0_SCK_MARK, RX2_C_MARK, ADIDATA_MARK,
+ VI1_CLK_C_MARK, VI1_G0_B_MARK,
+ MSIOF0_SYNC_MARK, TX2_C_MARK, ADICS_SAMP_MARK,
+ VI1_CLKENB_C_MARK, VI1_G1_B_MARK,
+ MSIOF0_TXD_MARK, ADICLK_MARK, VI1_FIELD_C_MARK, VI1_G2_B_MARK,
+ MSIOF0_RXD_MARK, ADICHS0_MARK, VI1_DATA0_C_MARK, VI1_G3_B_MARK,
+ MSIOF0_SS1_MARK, MMC_D6_MARK, ADICHS1_MARK, TX0_E_MARK,
+ VI1_HSYNC_N_C_MARK, SCL7_C_MARK, VI1_G4_B_MARK,
+ MSIOF0_SS2_MARK, MMC_D7_MARK, ADICHS2_MARK, RX0_E_MARK,
+ VI1_VSYNC_N_C_MARK, SDA7_C_MARK, VI1_G5_B_MARK,
+
+ /* IPSR15 */
+ SIM0_RST_MARK, IETX_MARK, CAN1_TX_D_MARK,
+ SIM0_CLK_MARK, IECLK_MARK, CAN_CLK_C_MARK,
+ SIM0_D_MARK, IERX_MARK, CAN1_RX_D_MARK,
+ GPS_CLK_MARK, DU1_DOTCLKIN_C_MARK, AUDIO_CLKB_B_MARK,
+ PWM5_B_MARK, SCIFA3_TXD_C_MARK,
+ GPS_SIGN_MARK, TX4_C_MARK, SCIFA4_TXD_C_MARK, PWM5_MARK,
+ VI1_G6_B_MARK, SCIFA3_RXD_C_MARK,
+ GPS_MAG_MARK, RX4_C_MARK, SCIFA4_RXD_C_MARK, PWM6_MARK,
+ VI1_G7_B_MARK, SCIFA3_SCK_C_MARK,
+ HCTS0_N_MARK, SCIFB0_CTS_N_MARK, GLO_I0_C_MARK,
+ TCLK1_MARK, VI1_DATA1_C_MARK,
+ HRTS0_N_MARK, SCIFB0_RTS_N_MARK, GLO_I1_C_MARK, VI1_DATA2_C_MARK,
+ HSCK0_MARK, SCIFB0_SCK_MARK, GLO_Q0_C_MARK, CAN_CLK_MARK,
+ TCLK2_MARK, VI1_DATA3_C_MARK,
+ HRX0_MARK, SCIFB0_RXD_MARK, GLO_Q1_C_MARK,
+ CAN0_RX_B_MARK, VI1_DATA4_C_MARK,
+ HTX0_MARK, SCIFB0_TXD_MARK, GLO_SCLK_C_MARK,
+ CAN0_TX_B_MARK, VI1_DATA5_C_MARK,
+
+ /* IPSR16 */
+ HRX1_MARK, SCIFB1_RXD_MARK, VI1_R0_B_MARK,
+ GLO_SDATA_C_MARK, VI1_DATA6_C_MARK,
+ HTX1_MARK, SCIFB1_TXD_MARK, VI1_R1_B_MARK,
+ GLO_SS_C_MARK, VI1_DATA7_C_MARK,
+ HSCK1_MARK, SCIFB1_SCK_MARK, MLB_CK_MARK, GLO_RFON_C_MARK,
+ HCTS1_N_MARK, SCIFB1_CTS_N_MARK, MLB_SIG_MARK, CAN1_TX_B_MARK,
+ HRTS1_N_MARK, SCIFB1_RTS_N_MARK, MLB_DAT_MARK, CAN1_RX_B_MARK,
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
+
+ PINMUX_DATA(EX_CS0_N_MARK, FN_EX_CS0_N),
+ PINMUX_DATA(RD_N_MARK, FN_RD_N),
+ PINMUX_DATA(AUDIO_CLKA_MARK, FN_AUDIO_CLKA),
+ PINMUX_DATA(VI0_CLK_MARK, FN_VI0_CLK),
+ PINMUX_DATA(VI0_DATA0_VI0_B0_MARK, FN_VI0_DATA0_VI0_B0),
+ PINMUX_DATA(VI0_DATA0_VI0_B1_MARK, FN_VI0_DATA0_VI0_B1),
+ PINMUX_DATA(VI0_DATA0_VI0_B2_MARK, FN_VI0_DATA0_VI0_B2),
+ PINMUX_DATA(VI0_DATA0_VI0_B4_MARK, FN_VI0_DATA0_VI0_B4),
+ PINMUX_DATA(VI0_DATA0_VI0_B5_MARK, FN_VI0_DATA0_VI0_B5),
+ PINMUX_DATA(VI0_DATA0_VI0_B6_MARK, FN_VI0_DATA0_VI0_B6),
+ PINMUX_DATA(VI0_DATA0_VI0_B7_MARK, FN_VI0_DATA0_VI0_B7),
+ PINMUX_DATA(USB0_PWEN_MARK, FN_USB0_PWEN),
+ PINMUX_DATA(USB0_OVC_MARK, FN_USB0_OVC),
+ PINMUX_DATA(USB1_PWEN_MARK, FN_USB1_PWEN),
+
+ /* IPSR0 - 5 */
+
+ /* IPSR6 */
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, AUDIO_CLKB, SEL_ADG_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, STP_OPWM_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, MSIOF1_SCK_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SCIF_CLK, SEL_SCIF_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, BPFCLK_E, SEL_FM_4),
+ PINMUX_IPSR_DATA(IP6_5_3, AUDIO_CLKC),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SCIFB0_SCK_C, SEL_SCIFB_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, MSIOF1_SYNC_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, RX2, SEL_SCIF2_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SCIFA2_RXD, SEL_SCIFA2_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, FMIN_E, SEL_FM_4),
+ PINMUX_IPSR_DATA(IP6_7_6, AUDIO_CLKOUT),
+ PINMUX_IPSR_MODSEL_DATA(IP6_7_6, MSIOF1_SS1_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, TX2, SEL_SCIF2_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_7_6, SCIFA2_TXD, SEL_SCIFA2_0),
+ PINMUX_IPSR_DATA(IP6_9_8, IRQ0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_9_8, SCIFB1_RXD_D, SEL_SCIFB1_3),
+ PINMUX_IPSR_DATA(IP6_9_8, INTC_IRQ0_N),
+ PINMUX_IPSR_DATA(IP6_11_10, IRQ1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_11_10, SCIFB1_SCK_C, SEL_SCIFB1_2),
+ PINMUX_IPSR_DATA(IP6_11_10, INTC_IRQ1_N),
+ PINMUX_IPSR_DATA(IP6_13_12, IRQ2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_13_12, SCIFB1_TXD_D, SEL_SCIFB1_3),
+ PINMUX_IPSR_DATA(IP6_13_12, INTC_IRQ2_N),
+ PINMUX_IPSR_DATA(IP6_15_14, IRQ3),
+ PINMUX_IPSR_MODSEL_DATA(IP6_15_14, SCL4_C, SEL_IIC4_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_15_14, MSIOF2_TXD_E, SEL_SOF2_4),
+ PINMUX_IPSR_DATA(IP6_15_14, INTC_IRQ4_N),
+ PINMUX_IPSR_DATA(IP6_18_16, IRQ4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_18_16, HRX1_C, SEL_HSCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_18_16, SDA4_C, SEL_IIC4_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_18_16, MSIOF2_RXD_E, SEL_SOF2_4),
+ PINMUX_IPSR_DATA(IP6_18_16, INTC_IRQ4_N),
+ PINMUX_IPSR_DATA(IP6_20_19, IRQ5),
+ PINMUX_IPSR_MODSEL_DATA(IP6_20_19, HTX1_C, SEL_HSCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_20_19, SCL1_E, SEL_IIC1_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_20_19, MSIOF2_SCK_E, SEL_SOF2_4),
+ PINMUX_IPSR_DATA(IP6_23_21, IRQ6),
+ PINMUX_IPSR_MODSEL_DATA(IP6_23_21, HSCK1_C, SEL_HSCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_23_21, MSIOF1_SS2_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_23_21, SDA1_E, SEL_IIC1_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_23_21, MSIOF2_SYNC_E, SEL_SOF2_4),
+ PINMUX_IPSR_DATA(IP6_26_24, IRQ7),
+ PINMUX_IPSR_MODSEL_DATA(IP6_26_24, HCTS1_N_C, SEL_HSCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_26_24, MSIOF1_TXD_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_26_24, GPS_CLK_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_26_24, GPS_CLK_D, SEL_GPS_3),
+ PINMUX_IPSR_DATA(IP6_29_27, IRQ8),
+ PINMUX_IPSR_MODSEL_DATA(IP6_29_27, HRTS1_N_C, SEL_HSCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_29_27, MSIOF1_RXD_B, SEL_SOF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_29_27, GPS_SIGN_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_29_27, GPS_SIGN_D, SEL_GPS_3),
+
+ /* IPSR7 - 10 */
+
+ /* IPSR11 */
+ PINMUX_IPSR_DATA(IP11_2_0, VI0_R5),
+ PINMUX_IPSR_DATA(IP11_2_0, VI2_DATA6),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, GLO_SDATA_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, RX0_C, SEL_SCIF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, SDA1_D, SEL_IIC1_3),
+ PINMUX_IPSR_DATA(IP11_5_3, VI0_R6),
+ PINMUX_IPSR_DATA(IP11_5_3, VI2_DATA7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, GLO_SS_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, TX1_C, SEL_SCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, SCL4_B, SEL_IIC4_1),
+ PINMUX_IPSR_DATA(IP11_8_6, VI0_R7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, GLO_RFON_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, RX1_C, SEL_SCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, CAN0_RX_E, SEL_CAN0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SDA4_B, SEL_IIC4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, HRX1_D, SEL_HSCIF1_3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SCIFB0_RXD_D, SEL_SCIFB_3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, VI1_HSYNC_N, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_11_9, AVB_RXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TS_SDATA0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TX4_B, SEL_SCIF4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, SCIFA4_TXD_B, SEL_SCIFA4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, VI1_VSYNC_N, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_14_12, AVB_RXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, TS_SCK0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, RX4_B, SEL_SCIF4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, SCIFA4_RXD_B, SEL_SCIFA4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_16_15, VI1_CLKENB, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_16_15, AVB_RXD2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_16_15, TS_SDEN0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_18_17, VI1_FIELD, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_18_17, AVB_RXD3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_18_17, TS_SPSYNC0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_19, VI1_CLK, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_19, AVB_RXD4),
+ PINMUX_IPSR_MODSEL_DATA(IP11_20, VI1_DATA0, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_20, AVB_RXD5),
+ PINMUX_IPSR_MODSEL_DATA(IP11_21, VI1_DATA1, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_21, AVB_RXD6),
+ PINMUX_IPSR_MODSEL_DATA(IP11_22, VI1_DATA2, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_22, AVB_RXD7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_23, VI1_DATA3, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_23, AVB_RX_ER),
+ PINMUX_IPSR_MODSEL_DATA(IP11_24, VI1_DATA4, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_24, AVB_MDIO),
+ PINMUX_IPSR_MODSEL_DATA(IP11_25, VI1_DATA5, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_25, AVB_RX_DV),
+ PINMUX_IPSR_MODSEL_DATA(IP11_26, VI1_DATA6, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_26, AVB_MAGIC),
+ PINMUX_IPSR_MODSEL_DATA(IP11_27, VI1_DATA7, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_27, AVB_MDC),
+ PINMUX_IPSR_DATA(IP11_29_28, ETH_MDIO),
+ PINMUX_IPSR_DATA(IP11_29_28, AVB_RX_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP11_29_28, SCL2_C, SEL_IIC2_2),
+ PINMUX_IPSR_DATA(IP11_31_30, ETH_CRS_DV),
+ PINMUX_IPSR_DATA(IP11_31_30, AVB_LINK),
+ PINMUX_IPSR_MODSEL_DATA(IP11_31_30, SDA2_C, SEL_IIC2_2),
+
+ /* IPSR12 */
+ PINMUX_IPSR_DATA(IP12_1_0, ETH_RX_ER),
+ PINMUX_IPSR_DATA(IP12_1_0, AVB_CRS),
+ PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL3, SEL_IIC3_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL7, SEL_IIC7_0),
+ PINMUX_IPSR_DATA(IP12_3_2, ETH_RXD0),
+ PINMUX_IPSR_DATA(IP12_3_2, AVB_PHY_INT),
+ PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA3, SEL_IIC3_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA7, SEL_IIC7_0),
+ PINMUX_IPSR_DATA(IP12_6_4, ETH_RXD1),
+ PINMUX_IPSR_DATA(IP12_6_4, AVB_GTXREFCLK),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, CAN0_TX_C, SEL_CAN0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, SCL2_D, SEL_IIC2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, MSIOF1_RXD_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_9_7, ETH_LINK),
+ PINMUX_IPSR_DATA(IP12_9_7, AVB_TXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, CAN0_RX_C, SEL_CAN0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, SDA2_D, SEL_IIC2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, MSIOF1_SCK_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_12_10, ETH_REFCLK),
+ PINMUX_IPSR_DATA(IP12_12_10, AVB_TXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, SCIFA3_RXD_B, SEL_SCIFA3_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, CAN1_RX_C, SEL_CAN1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, MSIOF1_SYNC_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_15_13, ETH_TXD1),
+ PINMUX_IPSR_DATA(IP12_15_13, AVB_TXD2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, SCIFA3_TXD_B, SEL_SCIFA3_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, CAN1_TX_C, SEL_CAN1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, MSIOF1_TXD_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_17_16, ETH_TX_EN),
+ PINMUX_IPSR_DATA(IP12_17_16, AVB_TXD3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_17_16, TCLK1_B, SEL_TMU1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_17_16, CAN_CLK_B, SEL_CANCLK_1),
+ PINMUX_IPSR_DATA(IP12_19_18, ETH_MAGIC),
+ PINMUX_IPSR_DATA(IP12_19_18, AVB_TXD4),
+ PINMUX_IPSR_MODSEL_DATA(IP12_19_18, IETX_C, SEL_IEB_2),
+ PINMUX_IPSR_DATA(IP12_21_20, ETH_TXD0),
+ PINMUX_IPSR_DATA(IP12_21_20, AVB_TXD5),
+ PINMUX_IPSR_MODSEL_DATA(IP12_21_20, IECLK_C, SEL_IEB_2),
+ PINMUX_IPSR_DATA(IP12_23_22, ETH_MDC),
+ PINMUX_IPSR_DATA(IP12_23_22, AVB_TXD6),
+ PINMUX_IPSR_MODSEL_DATA(IP12_23_22, IERX_C, SEL_IEB_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, STP_IVCXO27_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP12_26_24, AVB_TXD7),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, SCIFB2_TXD_D, SEL_SCIFB2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, ADIDATA_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, MSIOF0_SYNC_C, SEL_SOF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, STP_ISCLK_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP12_29_27, AVB_TX_EN),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, SCIFB2_RXD_D, SEL_SCIFB2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, ADICS_SAMP_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, MSIOF0_SCK_C, SEL_SOF0_2),
+
+ /* IPSR13 */
+ PINMUX_IPSR_MODSEL_DATA(IP13_2_0, STP_ISD_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP13_2_0, AVB_TX_ER),
+ PINMUX_IPSR_MODSEL_DATA(IP13_2_0, SCIFB2_SCK_C, SEL_SCIFB2_2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_2_0, ADICLK_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_2_0, MSIOF0_SS1_C, SEL_SOF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_4_3, STP_ISEN_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP13_4_3, AVB_TX_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP13_4_3, ADICHS0_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_4_3, MSIOF0_SS2_C, SEL_SOF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_6_5, STP_ISSYNC_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP13_6_5, AVB_COL),
+ PINMUX_IPSR_MODSEL_DATA(IP13_6_5, ADICHS1_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_6_5, MSIOF0_RXD_C, SEL_SOF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_9_7, STP_OPWM_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP13_9_7, AVB_GTX_CLK),
+ PINMUX_IPSR_DATA(IP13_9_7, PWM0_B),
+ PINMUX_IPSR_MODSEL_DATA(IP13_9_7, ADICHS2_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_9_7, MSIOF0_TXD_C, SEL_SOF0_2),
+ PINMUX_IPSR_DATA(IP13_10, SD0_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP13_10, SPCLK_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_11, SD0_CMD),
+ PINMUX_IPSR_MODSEL_DATA(IP13_11, MOSI_IO0_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_12, SD0_DATA0),
+ PINMUX_IPSR_MODSEL_DATA(IP13_12, MISO_IO1_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_13, SD0_DATA1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_13, IO2_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_14, SD0_DATA2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_14, IO3_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_15, SD0_DATA3),
+ PINMUX_IPSR_MODSEL_DATA(IP13_15, SSL_B, SEL_QSP_1),
+ PINMUX_IPSR_DATA(IP13_18_16, SD0_CD),
+ PINMUX_IPSR_MODSEL_DATA(IP13_18_16, MMC_D6_B, SEL_MMC_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_18_16, SIM0_RST_B, SEL_SIM_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_18_16, CAN0_RX_F, SEL_CAN0_5),
+ PINMUX_IPSR_MODSEL_DATA(IP13_18_16, SCIFA5_TXD_B, SEL_SCIFA5_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_18_16, TX3_C, SEL_SCIF3_2),
+ PINMUX_IPSR_DATA(IP13_21_19, SD0_WP),
+ PINMUX_IPSR_MODSEL_DATA(IP13_21_19, MMC_D7_B, SEL_MMC_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_21_19, SIM0_D_B, SEL_SIM_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_21_19, CAN0_TX_F, SEL_CAN0_5),
+ PINMUX_IPSR_MODSEL_DATA(IP13_21_19, SCIFA5_RXD_B, SEL_SCIFA5_1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_21_19, RX3_C, SEL_SCIF3_2),
+ PINMUX_IPSR_DATA(IP13_22, SD1_CMD),
+ PINMUX_IPSR_MODSEL_DATA(IP13_22, REMOCON_B, SEL_RCN_1),
+ PINMUX_IPSR_DATA(IP13_24_23, SD1_DATA0),
+ PINMUX_IPSR_MODSEL_DATA(IP13_24_23, SPEEDIN_B, SEL_RSP_1),
+ PINMUX_IPSR_DATA(IP13_25, SD1_DATA1),
+ PINMUX_IPSR_MODSEL_DATA(IP13_25, IETX_B, SEL_IEB_1),
+ PINMUX_IPSR_DATA(IP13_26, SD1_DATA2),
+ PINMUX_IPSR_MODSEL_DATA(IP13_26, IECLK_B, SEL_IEB_1),
+ PINMUX_IPSR_DATA(IP13_27, SD1_DATA3),
+ PINMUX_IPSR_MODSEL_DATA(IP13_27, IERX_B, SEL_IEB_1),
+ PINMUX_IPSR_DATA(IP13_30_28, SD1_CD),
+ PINMUX_IPSR_DATA(IP13_30_28, PWM0),
+ PINMUX_IPSR_DATA(IP13_30_28, TPU_TO0),
+ PINMUX_IPSR_MODSEL_DATA(IP13_30_28, SCL1_C, SEL_IIC1_2),
+
+ /* IPSR14 */
+ PINMUX_IPSR_DATA(IP14_1_0, SD1_WP),
+ PINMUX_IPSR_DATA(IP14_1_0, PWM1_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_1_0, SDA1_C, SEL_IIC1_2),
+ PINMUX_IPSR_DATA(IP14_2, SD2_CLK),
+ PINMUX_IPSR_DATA(IP14_2, MMC_CLK),
+ PINMUX_IPSR_DATA(IP14_3, SD2_CMD),
+ PINMUX_IPSR_DATA(IP14_3, MMC_CMD),
+ PINMUX_IPSR_DATA(IP14_4, SD2_DATA0),
+ PINMUX_IPSR_DATA(IP14_4, MMC_D0),
+ PINMUX_IPSR_DATA(IP14_5, SD2_DATA1),
+ PINMUX_IPSR_DATA(IP14_5, MMC_D1),
+ PINMUX_IPSR_DATA(IP14_6, SD2_DATA2),
+ PINMUX_IPSR_DATA(IP14_6, MMC_D2),
+ PINMUX_IPSR_DATA(IP14_7, SD2_DATA3),
+ PINMUX_IPSR_DATA(IP14_7, MMC_D3),
+ PINMUX_IPSR_DATA(IP14_10_8, SD2_CD),
+ PINMUX_IPSR_DATA(IP14_10_8, MMC_D4),
+ PINMUX_IPSR_MODSEL_DATA(IP14_10_8, SCL8_C, SEL_IIC8_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_10_8, TX5_B, SEL_SCIF5_1),
+ PINMUX_IPSR_MODSEL_DATA(IP14_10_8, SCIFA5_TXD_C, SEL_SCIFA5_2),
+ PINMUX_IPSR_DATA(IP14_13_11, SD2_WP),
+ PINMUX_IPSR_DATA(IP14_13_11, MMC_D5),
+ PINMUX_IPSR_MODSEL_DATA(IP14_13_11, SDA8_C, SEL_IIC8_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_13_11, RX5_B, SEL_SCIF5_1),
+ PINMUX_IPSR_MODSEL_DATA(IP14_13_11, SCIFA5_RXD_C, SEL_SCIFA5_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_16_14, MSIOF0_SCK, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_16_14, RX2_C, SEL_SCIF2_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_16_14, ADIDATA, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_16_14, VI1_CLK_C, SEL_VI1_2),
+ PINMUX_IPSR_DATA(IP14_16_14, VI1_G0_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_19_17, MSIOF0_SYNC, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_19_17, TX2_C, SEL_SCIF2_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_19_17, ADICS_SAMP, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_19_17, VI1_CLKENB_C, SEL_VI1_2),
+ PINMUX_IPSR_DATA(IP14_19_17, VI1_G1_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_22_20, MSIOF0_TXD, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_22_20, ADICLK, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_22_20, VI1_FIELD_C, SEL_VI1_2),
+ PINMUX_IPSR_DATA(IP14_22_20, VI1_G2_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_25_23, MSIOF0_RXD, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_25_23, ADICHS0, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_25_23, VI1_DATA0_C, SEL_VI1_2),
+ PINMUX_IPSR_DATA(IP14_25_23, VI1_G3_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, MSIOF0_SS1, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, MMC_D6, SEL_MMC_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, ADICHS1, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, TX0_E, SEL_SCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, VI1_HSYNC_N_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_28_26, SCL7_C, SEL_IIC7_2),
+ PINMUX_IPSR_DATA(IP14_28_26, VI1_G4_B),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, MSIOF0_SS2, SEL_SOF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, MMC_D7, SEL_MMC_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, ADICHS2, SEL_RAD_0),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, RX0_E, SEL_SCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, VI1_VSYNC_N_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP14_31_29, SDA7_C, SEL_IIC7_2),
+ PINMUX_IPSR_DATA(IP14_31_29, VI1_G5_B),
+
+ /* IPSR15 */
+ PINMUX_IPSR_MODSEL_DATA(IP15_1_0, SIM0_RST, SEL_SIM_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_1_0, IETX, SEL_IEB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_1_0, CAN1_TX_D, SEL_CAN1_3),
+ PINMUX_IPSR_DATA(IP15_3_2, SIM0_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP15_3_2, IECLK, SEL_IEB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_3_2, CAN_CLK_C, SEL_CANCLK_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_5_4, SIM0_D, SEL_SIM_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_5_4, IERX, SEL_IEB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_5_4, CAN1_RX_D, SEL_CAN1_3),
+ PINMUX_IPSR_MODSEL_DATA(IP15_8_6, GPS_CLK, SEL_GPS_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_8_6, DU1_DOTCLKIN_C, SEL_DIS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_8_6, AUDIO_CLKB_B, SEL_ADG_1),
+ PINMUX_IPSR_DATA(IP15_8_6, PWM5_B),
+ PINMUX_IPSR_MODSEL_DATA(IP15_8_6, SCIFA3_TXD_C, SEL_SCIFA3_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_11_9, GPS_SIGN, SEL_GPS_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_11_9, TX4_C, SEL_SCIF4_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_11_9, SCIFA4_TXD_C, SEL_SCIFA4_2),
+ PINMUX_IPSR_DATA(IP15_11_9, PWM5),
+ PINMUX_IPSR_DATA(IP15_11_9, VI1_G6_B),
+ PINMUX_IPSR_MODSEL_DATA(IP15_11_9, SCIFA3_RXD_C, SEL_SCIFA3_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_14_12, GPS_MAG, SEL_GPS_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_14_12, RX4_C, SEL_SCIF4_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_14_12, SCIFA4_RXD_C, SEL_SCIFA4_2),
+ PINMUX_IPSR_DATA(IP15_14_12, PWM6),
+ PINMUX_IPSR_DATA(IP15_14_12, VI1_G7_B),
+ PINMUX_IPSR_MODSEL_DATA(IP15_14_12, SCIFA3_SCK_C, SEL_SCIFA3_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_17_15, HCTS0_N, SEL_HSCIF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_17_15, SCIFB0_CTS_N, SEL_SCIFB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_17_15, GLO_I0_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_17_15, TCLK1, SEL_TMU1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_17_15, VI1_DATA1_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_20_18, HRTS0_N, SEL_HSCIF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_20_18, SCIFB0_RTS_N, SEL_SCIFB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_20_18, GLO_I1_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_20_18, VI1_DATA2_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_23_21, HSCK0, SEL_HSCIF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_23_21, SCIFB0_SCK, SEL_SCIFB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_23_21, GLO_Q0_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_23_21, CAN_CLK, SEL_CANCLK_0),
+ PINMUX_IPSR_DATA(IP15_23_21, TCLK2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_23_21, VI1_DATA3_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_26_24, HRX0, SEL_HSCIF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_26_24, SCIFB0_RXD, SEL_SCIFB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_26_24, GLO_Q1_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_26_24, CAN0_RX_B, SEL_CAN0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP15_26_24, VI1_DATA4_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_29_27, HTX0, SEL_HSCIF0_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_29_27, SCIFB0_TXD, SEL_SCIFB_0),
+ PINMUX_IPSR_MODSEL_DATA(IP15_29_27, GLO_SCLK_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP15_29_27, CAN0_TX_B, SEL_CAN0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP15_29_27, VI1_DATA5_C, SEL_VI1_2),
+
+ /* IPSR16 */
+ PINMUX_IPSR_MODSEL_DATA(IP16_2_0, HRX1, SEL_HSCIF1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP16_2_0, SCIFB1_RXD, SEL_SCIFB1_0),
+ PINMUX_IPSR_DATA(IP16_2_0, VI1_R0_B),
+ PINMUX_IPSR_MODSEL_DATA(IP16_2_0, GLO_SDATA_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP16_2_0, VI1_DATA6_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP16_5_3, HTX1, SEL_HSCIF1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP16_5_3, SCIFB1_TXD, SEL_SCIFB1_0),
+ PINMUX_IPSR_DATA(IP16_5_3, VI1_R1_B),
+ PINMUX_IPSR_MODSEL_DATA(IP16_5_3, GLO_SS_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP16_5_3, VI1_DATA7_C, SEL_VI1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP16_7_6, HSCK1, SEL_HSCIF1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP16_7_6, SCIFB1_SCK, SEL_SCIFB1_0),
+ PINMUX_IPSR_DATA(IP16_7_6, MLB_CK),
+ PINMUX_IPSR_MODSEL_DATA(IP16_7_6, GLO_RFON_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP16_9_8, HCTS1_N, SEL_HSCIF1_0),
+ PINMUX_IPSR_DATA(IP16_9_8, SCIFB1_CTS_N),
+ PINMUX_IPSR_DATA(IP16_9_8, MLB_SIG),
+ PINMUX_IPSR_MODSEL_DATA(IP16_9_8, CAN1_TX_B, SEL_CAN1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP16_11_10, HRTS1_N, SEL_HSCIF1_0),
+ PINMUX_IPSR_DATA(IP16_11_10, SCIFB1_RTS_N),
+ PINMUX_IPSR_DATA(IP16_11_10, MLB_DAT),
+ PINMUX_IPSR_MODSEL_DATA(IP16_11_10, CAN1_RX_B, SEL_CAN1_1),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ PINMUX_GPIO_GP_ALL(),
+
+ GPIO_FN(EX_CS0_N), GPIO_FN(RD_N), GPIO_FN(AUDIO_CLKA),
+ GPIO_FN(VI0_CLK), GPIO_FN(VI0_DATA0_VI0_B0),
+ GPIO_FN(VI0_DATA0_VI0_B1), GPIO_FN(VI0_DATA0_VI0_B2),
+ GPIO_FN(VI0_DATA0_VI0_B4), GPIO_FN(VI0_DATA0_VI0_B5),
+ GPIO_FN(VI0_DATA0_VI0_B6), GPIO_FN(VI0_DATA0_VI0_B7),
+ GPIO_FN(USB0_PWEN), GPIO_FN(USB0_OVC), GPIO_FN(USB1_PWEN),
+
+ /* IPSR0 - 5 */
+
+ /* IPSR6 */
+ GPIO_FN(AUDIO_CLKB), GPIO_FN(STP_OPWM_0_B), GPIO_FN(MSIOF1_SCK_B),
+ GPIO_FN(SCIF_CLK), GPIO_FN(BPFCLK_E),
+ GPIO_FN(AUDIO_CLKC), GPIO_FN(SCIFB0_SCK_C),
+ GPIO_FN(MSIOF1_SYNC_B), GPIO_FN(RX2),
+ GPIO_FN(SCIFA2_RXD), GPIO_FN(FMIN_E),
+ GPIO_FN(AUDIO_CLKOUT), GPIO_FN(MSIOF1_SS1_B),
+ GPIO_FN(TX2), GPIO_FN(SCIFA2_TXD),
+ GPIO_FN(IRQ0), GPIO_FN(SCIFB1_RXD_D), GPIO_FN(INTC_IRQ0_N),
+ GPIO_FN(IRQ1), GPIO_FN(SCIFB1_SCK_C), GPIO_FN(INTC_IRQ1_N),
+ GPIO_FN(IRQ2), GPIO_FN(SCIFB1_TXD_D), GPIO_FN(INTC_IRQ2_N),
+ GPIO_FN(IRQ3), GPIO_FN(SCL4_C),
+ GPIO_FN(MSIOF2_TXD_E), GPIO_FN(INTC_IRQ3_N),
+ GPIO_FN(IRQ4), GPIO_FN(HRX1_C), GPIO_FN(SDA4_C),
+ GPIO_FN(MSIOF2_RXD_E), GPIO_FN(INTC_IRQ4_N),
+ GPIO_FN(IRQ5), GPIO_FN(HTX1_C), GPIO_FN(SCL1_E), GPIO_FN(MSIOF2_SCK_E),
+ GPIO_FN(IRQ6), GPIO_FN(HSCK1_C), GPIO_FN(MSIOF1_SS2_B),
+ GPIO_FN(SDA1_E), GPIO_FN(MSIOF2_SYNC_E),
+ GPIO_FN(IRQ7), GPIO_FN(HCTS1_N_C), GPIO_FN(MSIOF1_TXD_B),
+ GPIO_FN(GPS_CLK_C), GPIO_FN(GPS_CLK_D),
+ GPIO_FN(IRQ8), GPIO_FN(HRTS1_N_C), GPIO_FN(MSIOF1_RXD_B),
+ GPIO_FN(GPS_SIGN_C), GPIO_FN(GPS_SIGN_D),
+
+ /* IPSR7 - 10 */
+
+ /* IPSR11 */
+ GPIO_FN(VI0_R5), GPIO_FN(VI2_DATA6), GPIO_FN(GLO_SDATA_B),
+ GPIO_FN(RX0_C), GPIO_FN(SDA1_D),
+ GPIO_FN(VI0_R6), GPIO_FN(VI2_DATA7),
+ GPIO_FN(GLO_SS_B), GPIO_FN(TX1_C), GPIO_FN(SCL4_B),
+ GPIO_FN(VI0_R7), GPIO_FN(GLO_RFON_B),
+ GPIO_FN(RX1_C), GPIO_FN(CAN0_RX_E),
+ GPIO_FN(SDA4_B), GPIO_FN(HRX1_D), GPIO_FN(SCIFB0_RXD_D),
+ GPIO_FN(VI1_HSYNC_N), GPIO_FN(AVB_RXD0), GPIO_FN(TS_SDATA0_B),
+ GPIO_FN(TX4_B), GPIO_FN(SCIFA4_TXD_B),
+ GPIO_FN(VI1_VSYNC_N), GPIO_FN(AVB_RXD1), GPIO_FN(TS_SCK0_B),
+ GPIO_FN(RX4_B), GPIO_FN(SCIFA4_RXD_B),
+ GPIO_FN(VI1_CLKENB), GPIO_FN(AVB_RXD2), GPIO_FN(TS_SDEN0_B),
+ GPIO_FN(VI1_FIELD), GPIO_FN(AVB_RXD3), GPIO_FN(TS_SPSYNC0_B),
+ GPIO_FN(VI1_CLK), GPIO_FN(AVB_RXD4),
+ GPIO_FN(VI1_DATA0), GPIO_FN(AVB_RXD5),
+ GPIO_FN(VI1_DATA1), GPIO_FN(AVB_RXD6),
+ GPIO_FN(VI1_DATA2), GPIO_FN(AVB_RXD7),
+ GPIO_FN(VI1_DATA3), GPIO_FN(AVB_RX_ER),
+ GPIO_FN(VI1_DATA4), GPIO_FN(AVB_MDIO),
+ GPIO_FN(VI1_DATA5), GPIO_FN(AVB_RX_DV),
+ GPIO_FN(VI1_DATA6), GPIO_FN(AVB_MAGIC),
+ GPIO_FN(VI1_DATA7), GPIO_FN(AVB_MDC),
+ GPIO_FN(ETH_MDIO), GPIO_FN(AVB_RX_CLK), GPIO_FN(SCL2_C),
+ GPIO_FN(ETH_CRS_DV), GPIO_FN(AVB_LINK), GPIO_FN(SDA2_C),
+
+ /* IPSR12 */
+ GPIO_FN(ETH_RX_ER), GPIO_FN(AVB_CRS), GPIO_FN(SCL3), GPIO_FN(SCL7),
+ GPIO_FN(ETH_RXD0), GPIO_FN(AVB_PHY_INT), GPIO_FN(SDA3), GPIO_FN(SDA7),
+ GPIO_FN(ETH_RXD1), GPIO_FN(AVB_GTXREFCLK), GPIO_FN(CAN0_TX_C),
+ GPIO_FN(SCL2_D), GPIO_FN(MSIOF1_RXD_E),
+ GPIO_FN(ETH_LINK), GPIO_FN(AVB_TXD0), GPIO_FN(CAN0_RX_C),
+ GPIO_FN(SDA2_D), GPIO_FN(MSIOF1_SCK_E),
+ GPIO_FN(ETH_REFCLK), GPIO_FN(AVB_TXD1), GPIO_FN(SCIFA3_RXD_B),
+ GPIO_FN(CAN1_RX_C), GPIO_FN(MSIOF1_SYNC_E),
+ GPIO_FN(ETH_TXD1), GPIO_FN(AVB_TXD2), GPIO_FN(SCIFA3_TXD_B),
+ GPIO_FN(CAN1_TX_C), GPIO_FN(MSIOF1_TXD_E),
+ GPIO_FN(ETH_TX_EN), GPIO_FN(AVB_TXD3),
+ GPIO_FN(TCLK1_B), GPIO_FN(CAN_CLK_B),
+ GPIO_FN(ETH_MAGIC), GPIO_FN(AVB_TXD4), GPIO_FN(IETX_C),
+ GPIO_FN(ETH_TXD0), GPIO_FN(AVB_TXD5), GPIO_FN(IECLK_C),
+ GPIO_FN(ETH_MDC), GPIO_FN(AVB_TXD6), GPIO_FN(IERX_C),
+ GPIO_FN(STP_IVCXO27_0), GPIO_FN(AVB_TXD7), GPIO_FN(SCIFB2_TXD_D),
+ GPIO_FN(ADIDATA_B), GPIO_FN(MSIOF0_SYNC_C),
+ GPIO_FN(STP_ISCLK_0), GPIO_FN(AVB_TX_EN), GPIO_FN(SCIFB2_RXD_D),
+ GPIO_FN(ADICS_SAMP_B), GPIO_FN(MSIOF0_SCK_C),
+
+ /* IPSR13 */
+ GPIO_FN(STP_ISD_0), GPIO_FN(AVB_TX_ER), GPIO_FN(SCIFB2_SCK_C),
+ GPIO_FN(ADICLK_B), GPIO_FN(MSIOF0_SS1_C),
+ GPIO_FN(STP_ISEN_0), GPIO_FN(AVB_TX_CLK),
+ GPIO_FN(ADICHS0_B), GPIO_FN(MSIOF0_SS2_C),
+ GPIO_FN(STP_ISSYNC_0), GPIO_FN(AVB_COL),
+ GPIO_FN(ADICHS1_B), GPIO_FN(MSIOF0_RXD_C),
+ GPIO_FN(STP_OPWM_0), GPIO_FN(AVB_GTX_CLK), GPIO_FN(PWM0_B),
+ GPIO_FN(ADICHS2_B), GPIO_FN(MSIOF0_TXD_C),
+ GPIO_FN(SD0_CLK), GPIO_FN(SPCLK_B),
+ GPIO_FN(SD0_CMD), GPIO_FN(MOSI_IO0_B),
+ GPIO_FN(SD0_DATA0), GPIO_FN(MISO_IO1_B),
+ GPIO_FN(SD0_DATA1), GPIO_FN(IO2_B),
+ GPIO_FN(SD0_DATA2), GPIO_FN(IO3_B), GPIO_FN(SD0_DATA3), GPIO_FN(SSL_B),
+ GPIO_FN(SD0_CD), GPIO_FN(MMC_D6_B),
+ GPIO_FN(SIM0_RST_B), GPIO_FN(CAN0_RX_F),
+ GPIO_FN(SCIFA5_TXD_B), GPIO_FN(TX3_C),
+ GPIO_FN(SD0_WP), GPIO_FN(MMC_D7_B),
+ GPIO_FN(SIM0_D_B), GPIO_FN(CAN0_TX_F),
+ GPIO_FN(SCIFA5_RXD_B), GPIO_FN(RX3_C),
+ GPIO_FN(SD1_CMD), GPIO_FN(REMOCON_B),
+ GPIO_FN(SD1_DATA0), GPIO_FN(SPEEDIN_B),
+ GPIO_FN(SD1_DATA1), GPIO_FN(IETX_B),
+ GPIO_FN(SD1_DATA2), GPIO_FN(IECLK_B),
+ GPIO_FN(SD1_DATA3), GPIO_FN(IERX_B),
+ GPIO_FN(SD1_CD), GPIO_FN(PWM0), GPIO_FN(TPU_TO0), GPIO_FN(SCL1_C),
+
+ /* IPSR14 */
+ GPIO_FN(SD1_WP), GPIO_FN(PWM1_B), GPIO_FN(SDA1_C),
+ GPIO_FN(SD2_CLK), GPIO_FN(MMC_CLK), GPIO_FN(SD2_CMD), GPIO_FN(MMC_CMD),
+ GPIO_FN(SD2_DATA0), GPIO_FN(MMC_D0),
+ GPIO_FN(SD2_DATA1), GPIO_FN(MMC_D1),
+ GPIO_FN(SD2_DATA2), GPIO_FN(MMC_D2),
+ GPIO_FN(SD2_DATA3), GPIO_FN(MMC_D3),
+ GPIO_FN(SD2_CD), GPIO_FN(MMC_D4), GPIO_FN(SCL8_C),
+ GPIO_FN(TX5_B), GPIO_FN(SCIFA5_TXD_C),
+ GPIO_FN(SD2_WP), GPIO_FN(MMC_D5), GPIO_FN(SDA8_C),
+ GPIO_FN(RX5_B), GPIO_FN(SCIFA5_RXD_C),
+ GPIO_FN(MSIOF0_SCK), GPIO_FN(RX2_C), GPIO_FN(ADIDATA),
+ GPIO_FN(VI1_CLK_C), GPIO_FN(VI1_G0_B),
+ GPIO_FN(MSIOF0_SYNC), GPIO_FN(TX2_C), GPIO_FN(ADICS_SAMP),
+ GPIO_FN(VI1_CLKENB_C), GPIO_FN(VI1_G1_B),
+ GPIO_FN(MSIOF0_TXD), GPIO_FN(ADICLK),
+ GPIO_FN(VI1_FIELD_C), GPIO_FN(VI1_G2_B),
+ GPIO_FN(MSIOF0_RXD), GPIO_FN(ADICHS0),
+ GPIO_FN(VI1_DATA0_C), GPIO_FN(VI1_G3_B),
+ GPIO_FN(MSIOF0_SS1), GPIO_FN(MMC_D6), GPIO_FN(ADICHS1), GPIO_FN(TX0_E),
+ GPIO_FN(VI1_HSYNC_N_C), GPIO_FN(SCL7_C), GPIO_FN(VI1_G4_B),
+ GPIO_FN(MSIOF0_SS2), GPIO_FN(MMC_D7), GPIO_FN(ADICHS2), GPIO_FN(RX0_E),
+ GPIO_FN(VI1_VSYNC_N_C), GPIO_FN(SDA7_C), GPIO_FN(VI1_G5_B),
+
+ /* IPSR15 */
+ GPIO_FN(SIM0_RST), GPIO_FN(IETX), GPIO_FN(CAN1_TX_D),
+ GPIO_FN(SIM0_CLK), GPIO_FN(IECLK), GPIO_FN(CAN_CLK_C),
+ GPIO_FN(SIM0_D), GPIO_FN(IERX), GPIO_FN(CAN1_RX_D),
+ GPIO_FN(GPS_CLK), GPIO_FN(DU1_DOTCLKIN_C), GPIO_FN(AUDIO_CLKB_B),
+ GPIO_FN(PWM5_B), GPIO_FN(SCIFA3_TXD_C),
+ GPIO_FN(GPS_SIGN), GPIO_FN(TX4_C),
+ GPIO_FN(SCIFA4_TXD_C), GPIO_FN(PWM5),
+ GPIO_FN(VI1_G6_B), GPIO_FN(SCIFA3_RXD_C),
+ GPIO_FN(GPS_MAG), GPIO_FN(RX4_C), GPIO_FN(SCIFA4_RXD_C), GPIO_FN(PWM6),
+ GPIO_FN(VI1_G7_B), GPIO_FN(SCIFA3_SCK_C),
+ GPIO_FN(HCTS0_N), GPIO_FN(SCIFB0_CTS_N), GPIO_FN(GLO_I0_C),
+ GPIO_FN(TCLK1), GPIO_FN(VI1_DATA1_C),
+ GPIO_FN(HRTS0_N), GPIO_FN(SCIFB0_RTS_N),
+ GPIO_FN(GLO_I1_C), GPIO_FN(VI1_DATA2_C),
+ GPIO_FN(HSCK0), GPIO_FN(SCIFB0_SCK),
+ GPIO_FN(GLO_Q0_C), GPIO_FN(CAN_CLK),
+ GPIO_FN(TCLK2), GPIO_FN(VI1_DATA3_C),
+ GPIO_FN(HRX0), GPIO_FN(SCIFB0_RXD), GPIO_FN(GLO_Q1_C),
+ GPIO_FN(CAN0_RX_B), GPIO_FN(VI1_DATA4_C),
+ GPIO_FN(HTX0), GPIO_FN(SCIFB0_TXD), GPIO_FN(GLO_SCLK_C),
+ GPIO_FN(CAN0_TX_B), GPIO_FN(VI1_DATA5_C),
+
+ /* IPSR16 */
+ GPIO_FN(HRX1), GPIO_FN(SCIFB1_RXD), GPIO_FN(VI1_R0_B),
+ GPIO_FN(GLO_SDATA_C), GPIO_FN(VI1_DATA6_C),
+ GPIO_FN(HTX1), GPIO_FN(SCIFB1_TXD), GPIO_FN(VI1_R1_B),
+ GPIO_FN(GLO_SS_C), GPIO_FN(VI1_DATA7_C),
+ GPIO_FN(HSCK1), GPIO_FN(SCIFB1_SCK),
+ GPIO_FN(MLB_CK), GPIO_FN(GLO_RFON_C),
+ GPIO_FN(HCTS1_N), GPIO_FN(SCIFB1_CTS_N),
+ GPIO_FN(MLB_SIG), GPIO_FN(CAN1_TX_B),
+ GPIO_FN(HRTS1_N), GPIO_FN(SCIFB1_RTS_N),
+ GPIO_FN(MLB_DAT), GPIO_FN(CAN1_RX_B),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) {
+ GP_0_31_FN, FN_IP1_22_20,
+ GP_0_30_FN, FN_IP1_19_17,
+ GP_0_29_FN, FN_IP1_16_14,
+ GP_0_28_FN, FN_IP1_13_11,
+ GP_0_27_FN, FN_IP1_10_8,
+ GP_0_26_FN, FN_IP1_7_6,
+ GP_0_25_FN, FN_IP1_5_4,
+ GP_0_24_FN, FN_IP1_3_2,
+ GP_0_23_FN, FN_IP1_1_0,
+ GP_0_22_FN, FN_IP0_30_29,
+ GP_0_21_FN, FN_IP0_28_27,
+ GP_0_20_FN, FN_IP0_26_25,
+ GP_0_19_FN, FN_IP0_24_23,
+ GP_0_18_FN, FN_IP0_22_21,
+ GP_0_17_FN, FN_IP0_20_19,
+ GP_0_16_FN, FN_IP0_18_16,
+ GP_0_15_FN, FN_IP0_15,
+ GP_0_14_FN, FN_IP0_14,
+ GP_0_13_FN, FN_IP0_13,
+ GP_0_12_FN, FN_IP0_12,
+ GP_0_11_FN, FN_IP0_11,
+ GP_0_10_FN, FN_IP0_10,
+ GP_0_9_FN, FN_IP0_9,
+ GP_0_8_FN, FN_IP0_8,
+ GP_0_7_FN, FN_IP0_7,
+ GP_0_6_FN, FN_IP0_6,
+ GP_0_5_FN, FN_IP0_5,
+ GP_0_4_FN, FN_IP0_4,
+ GP_0_3_FN, FN_IP0_3,
+ GP_0_2_FN, FN_IP0_2,
+ GP_0_1_FN, FN_IP0_1,
+ GP_0_0_FN, FN_IP0_0, }
+ },
+ { PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_1_25_FN, FN_IP3_21_20,
+ GP_1_24_FN, FN_IP3_19_18,
+ GP_1_23_FN, FN_IP3_17_16,
+ GP_1_22_FN, FN_IP3_15_14,
+ GP_1_21_FN, FN_IP3_13_12,
+ GP_1_20_FN, FN_IP3_11_9,
+ GP_1_19_FN, FN_RD_N,
+ GP_1_18_FN, FN_IP3_8_6,
+ GP_1_17_FN, FN_IP3_5_3,
+ GP_1_16_FN, FN_IP3_2_0,
+ GP_1_15_FN, FN_IP2_29_27,
+ GP_1_14_FN, FN_IP2_26_25,
+ GP_1_13_FN, FN_IP2_24_23,
+ GP_1_12_FN, FN_EX_CS0_N,
+ GP_1_11_FN, FN_IP2_22_21,
+ GP_1_10_FN, FN_IP2_20_19,
+ GP_1_9_FN, FN_IP2_18_16,
+ GP_1_8_FN, FN_IP2_15_13,
+ GP_1_7_FN, FN_IP2_12_10,
+ GP_1_6_FN, FN_IP2_9_7,
+ GP_1_5_FN, FN_IP2_6_5,
+ GP_1_4_FN, FN_IP2_4_3,
+ GP_1_3_FN, FN_IP2_2_0,
+ GP_1_2_FN, FN_IP1_31_29,
+ GP_1_1_FN, FN_IP1_28_26,
+ GP_1_0_FN, FN_IP1_25_23, }
+ },
+ { PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) {
+ GP_2_31_FN, FN_IP6_7_6,
+ GP_2_30_FN, FN_IP6_5_3,
+ GP_2_29_FN, FN_IP6_2_0,
+ GP_2_28_FN, FN_AUDIO_CLKA,
+ GP_2_27_FN, FN_IP5_31_29,
+ GP_2_26_FN, FN_IP5_28_26,
+ GP_2_25_FN, FN_IP5_25_24,
+ GP_2_24_FN, FN_IP5_23_22,
+ GP_2_23_FN, FN_IP5_21_20,
+ GP_2_22_FN, FN_IP5_19_17,
+ GP_2_21_FN, FN_IP5_16_15,
+ GP_2_20_FN, FN_IP5_14_12,
+ GP_2_19_FN, FN_IP5_11_9,
+ GP_2_18_FN, FN_IP5_8_6,
+ GP_2_17_FN, FN_IP5_5_3,
+ GP_2_16_FN, FN_IP5_2_0,
+ GP_2_15_FN, FN_IP4_30_28,
+ GP_2_14_FN, FN_IP4_27_26,
+ GP_2_13_FN, FN_IP4_25_24,
+ GP_2_12_FN, FN_IP4_23_22,
+ GP_2_11_FN, FN_IP4_21,
+ GP_2_10_FN, FN_IP4_20,
+ GP_2_9_FN, FN_IP4_19,
+ GP_2_8_FN, FN_IP4_18_16,
+ GP_2_7_FN, FN_IP4_15_13,
+ GP_2_6_FN, FN_IP4_12_10,
+ GP_2_5_FN, FN_IP4_9_8,
+ GP_2_4_FN, FN_IP4_7_5,
+ GP_2_3_FN, FN_IP4_4_2,
+ GP_2_2_FN, FN_IP4_1_0,
+ GP_2_1_FN, FN_IP3_30_28,
+ GP_2_0_FN, FN_IP3_27_25 }
+ },
+ { PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) {
+ GP_3_31_FN, FN_IP9_18_17,
+ GP_3_30_FN, FN_IP9_16,
+ GP_3_29_FN, FN_IP9_15_13,
+ GP_3_28_FN, FN_IP9_12,
+ GP_3_27_FN, FN_IP9_11,
+ GP_3_26_FN, FN_IP9_10_8,
+ GP_3_25_FN, FN_IP9_7,
+ GP_3_24_FN, FN_IP9_6,
+ GP_3_23_FN, FN_IP9_5_3,
+ GP_3_22_FN, FN_IP9_2_0,
+ GP_3_21_FN, FN_IP8_30_28,
+ GP_3_20_FN, FN_IP8_27_26,
+ GP_3_19_FN, FN_IP8_25_24,
+ GP_3_18_FN, FN_IP8_23_21,
+ GP_3_17_FN, FN_IP8_20_18,
+ GP_3_16_FN, FN_IP8_17_15,
+ GP_3_15_FN, FN_IP8_14_12,
+ GP_3_14_FN, FN_IP8_11_9,
+ GP_3_13_FN, FN_IP8_8_6,
+ GP_3_12_FN, FN_IP8_5_3,
+ GP_3_11_FN, FN_IP8_2_0,
+ GP_3_10_FN, FN_IP7_29_27,
+ GP_3_9_FN, FN_IP7_26_24,
+ GP_3_8_FN, FN_IP7_23_21,
+ GP_3_7_FN, FN_IP7_20_19,
+ GP_3_6_FN, FN_IP7_18_17,
+ GP_3_5_FN, FN_IP7_16_15,
+ GP_3_4_FN, FN_IP7_14_13,
+ GP_3_3_FN, FN_IP7_12_11,
+ GP_3_2_FN, FN_IP7_10_9,
+ GP_3_1_FN, FN_IP7_8_6,
+ GP_3_0_FN, FN_IP7_5_3 }
+ },
+ { PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) {
+ GP_4_31_FN, FN_IP15_5_4,
+ GP_4_30_FN, FN_IP15_3_2,
+ GP_4_29_FN, FN_IP15_1_0,
+ GP_4_28_FN, FN_IP11_8_6,
+ GP_4_27_FN, FN_IP11_5_3,
+ GP_4_26_FN, FN_IP11_2_0,
+ GP_4_25_FN, FN_IP10_31_29,
+ GP_4_24_FN, FN_IP10_28_27,
+ GP_4_23_FN, FN_IP10_26_25,
+ GP_4_22_FN, FN_IP10_24_22,
+ GP_4_21_FN, FN_IP10_21_19,
+ GP_4_20_FN, FN_IP10_18_17,
+ GP_4_19_FN, FN_IP10_16_15,
+ GP_4_18_FN, FN_IP10_14_12,
+ GP_4_17_FN, FN_IP10_11_9,
+ GP_4_16_FN, FN_IP10_8_6,
+ GP_4_15_FN, FN_IP10_5_3,
+ GP_4_14_FN, FN_IP10_2_0,
+ GP_4_13_FN, FN_IP9_31_29,
+ GP_4_12_FN, FN_VI0_DATA0_VI0_B7,
+ GP_4_11_FN, FN_VI0_DATA0_VI0_B6,
+ GP_4_10_FN, FN_VI0_DATA0_VI0_B5,
+ GP_4_9_FN, FN_VI0_DATA0_VI0_B4,
+ GP_4_8_FN, FN_IP9_28_27,
+ GP_4_7_FN, FN_VI0_DATA0_VI0_B2,
+ GP_4_6_FN, FN_VI0_DATA0_VI0_B1,
+ GP_4_5_FN, FN_VI0_DATA0_VI0_B0,
+ GP_4_4_FN, FN_IP9_26_25,
+ GP_4_3_FN, FN_IP9_24_23,
+ GP_4_2_FN, FN_IP9_22_21,
+ GP_4_1_FN, FN_IP9_20_19,
+ GP_4_0_FN, FN_VI0_CLK }
+ },
+ { PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) {
+ GP_5_31_FN, FN_IP3_24_22,
+ GP_5_30_FN, FN_IP13_9_7,
+ GP_5_29_FN, FN_IP13_6_5,
+ GP_5_28_FN, FN_IP13_4_3,
+ GP_5_27_FN, FN_IP13_2_0,
+ GP_5_26_FN, FN_IP12_29_27,
+ GP_5_25_FN, FN_IP12_26_24,
+ GP_5_24_FN, FN_IP12_23_22,
+ GP_5_23_FN, FN_IP12_21_20,
+ GP_5_22_FN, FN_IP12_19_18,
+ GP_5_21_FN, FN_IP12_17_16,
+ GP_5_20_FN, FN_IP12_15_13,
+ GP_5_19_FN, FN_IP12_12_10,
+ GP_5_18_FN, FN_IP12_9_7,
+ GP_5_17_FN, FN_IP12_6_4,
+ GP_5_16_FN, FN_IP12_3_2,
+ GP_5_15_FN, FN_IP12_1_0,
+ GP_5_14_FN, FN_IP11_31_30,
+ GP_5_13_FN, FN_IP11_29_28,
+ GP_5_12_FN, FN_IP11_27,
+ GP_5_11_FN, FN_IP11_26,
+ GP_5_10_FN, FN_IP11_25,
+ GP_5_9_FN, FN_IP11_24,
+ GP_5_8_FN, FN_IP11_23,
+ GP_5_7_FN, FN_IP11_22,
+ GP_5_6_FN, FN_IP11_21,
+ GP_5_5_FN, FN_IP11_20,
+ GP_5_4_FN, FN_IP11_19,
+ GP_5_3_FN, FN_IP11_18_17,
+ GP_5_2_FN, FN_IP11_16_15,
+ GP_5_1_FN, FN_IP11_14_12,
+ GP_5_0_FN, FN_IP11_11_9 }
+ },
+ { PINMUX_CFG_REG("GPSR6", 0xE606001C, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_6_29_FN, FN_IP14_31_29,
+ GP_6_28_FN, FN_IP14_28_26,
+ GP_6_27_FN, FN_IP14_25_23,
+ GP_6_26_FN, FN_IP14_22_20,
+ GP_6_25_FN, FN_IP14_19_17,
+ GP_6_24_FN, FN_IP14_16_14,
+ GP_6_23_FN, FN_IP14_13_11,
+ GP_6_22_FN, FN_IP14_10_8,
+ GP_6_21_FN, FN_IP14_7,
+ GP_6_20_FN, FN_IP14_6,
+ GP_6_19_FN, FN_IP14_5,
+ GP_6_18_FN, FN_IP14_4,
+ GP_6_17_FN, FN_IP14_3,
+ GP_6_16_FN, FN_IP14_2,
+ GP_6_15_FN, FN_IP14_1_0,
+ GP_6_14_FN, FN_IP13_30_28,
+ GP_6_13_FN, FN_IP13_27,
+ GP_6_12_FN, FN_IP13_26,
+ GP_6_11_FN, FN_IP13_25,
+ GP_6_10_FN, FN_IP13_24_23,
+ GP_6_9_FN, FN_IP13_22,
+ 0, 0,
+ GP_6_7_FN, FN_IP13_21_19,
+ GP_6_6_FN, FN_IP13_18_16,
+ GP_6_5_FN, FN_IP13_15,
+ GP_6_4_FN, FN_IP13_14,
+ GP_6_3_FN, FN_IP13_13,
+ GP_6_2_FN, FN_IP13_12,
+ GP_6_1_FN, FN_IP13_11,
+ GP_6_0_FN, FN_IP13_10 }
+ },
+ { PINMUX_CFG_REG("GPSR7", 0xE6060074, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_7_25_FN, FN_USB1_PWEN,
+ GP_7_24_FN, FN_USB0_OVC,
+ GP_7_23_FN, FN_USB0_PWEN,
+ GP_7_22_FN, FN_IP15_14_12,
+ GP_7_21_FN, FN_IP15_11_9,
+ GP_7_20_FN, FN_IP15_8_6,
+ GP_7_19_FN, FN_IP7_2_0,
+ GP_7_18_FN, FN_IP6_29_27,
+ GP_7_17_FN, FN_IP6_26_24,
+ GP_7_16_FN, FN_IP6_23_21,
+ GP_7_15_FN, FN_IP6_20_19,
+ GP_7_14_FN, FN_IP6_18_16,
+ GP_7_13_FN, FN_IP6_15_14,
+ GP_7_12_FN, FN_IP6_13_12,
+ GP_7_11_FN, FN_IP6_11_10,
+ GP_7_10_FN, FN_IP6_9_8,
+ GP_7_9_FN, FN_IP16_11_10,
+ GP_7_8_FN, FN_IP16_9_8,
+ GP_7_7_FN, FN_IP16_7_6,
+ GP_7_6_FN, FN_IP16_5_3,
+ GP_7_5_FN, FN_IP16_2_0,
+ GP_7_4_FN, FN_IP15_29_27,
+ GP_7_3_FN, FN_IP15_26_24,
+ GP_7_2_FN, FN_IP15_23_21,
+ GP_7_1_FN, FN_IP15_20_18,
+ GP_7_0_FN, FN_IP15_17_15 }
+ },
+
+ /* IPSR0 - 5 */
+
+ { PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32,
+ 2, 3, 3, 3, 2, 3, 2, 2, 2, 2, 2, 3, 3) {
+ /* IP6_31_30 [2] */
+ 0, 0, 0, 0,
+ /* IP6_29_27 [3] */
+ FN_IRQ8, FN_HRTS1_N_C, FN_MSIOF1_RXD_B,
+ FN_GPS_SIGN_C, FN_GPS_SIGN_D,
+ 0, 0, 0,
+ /* IP6_26_24 [3] */
+ FN_IRQ7, FN_HCTS1_N_C, FN_MSIOF1_TXD_B,
+ FN_GPS_CLK_C, FN_GPS_CLK_D,
+ 0, 0, 0,
+ /* IP6_23_21 [3] */
+ FN_IRQ6, FN_HSCK1_C, FN_MSIOF1_SS2_B,
+ FN_SDA1_E, FN_MSIOF2_SYNC_E,
+ 0, 0, 0,
+ /* IP6_20_19 [2] */
+ FN_IRQ5, FN_HTX1_C, FN_SCL1_E, FN_MSIOF2_SCK_E,
+ /* IP6_18_16 [3] */
+ FN_IRQ4, FN_HRX1_C, FN_SDA4_C, FN_MSIOF2_RXD_E, FN_INTC_IRQ4_N,
+ 0, 0, 0,
+ /* IP6_15_14 [2] */
+ FN_IRQ3, FN_SCL4_C, FN_MSIOF2_TXD_E, FN_INTC_IRQ3_N,
+ /* IP6_13_12 [2] */
+ FN_IRQ2, FN_SCIFB1_TXD_D, FN_INTC_IRQ2_N, 0,
+ /* IP6_11_10 [2] */
+ FN_IRQ1, FN_SCIFB1_SCK_C, FN_INTC_IRQ1_N, 0,
+ /* IP6_9_8 [2] */
+ FN_IRQ0, FN_SCIFB1_RXD_D, FN_INTC_IRQ0_N, 0,
+ /* IP6_7_6 [2] */
+ FN_AUDIO_CLKOUT, FN_MSIOF1_SS1_B, FN_TX2, FN_SCIFA2_TXD,
+ /* IP6_5_3 [3] */
+ FN_AUDIO_CLKC, FN_SCIFB0_SCK_C, FN_MSIOF1_SYNC_B, FN_RX2,
+ FN_SCIFA2_RXD, FN_FMIN_E,
+ 0, 0,
+ /* IP6_2_0 [3] */
+ FN_AUDIO_CLKB, FN_STP_OPWM_0_B, FN_MSIOF1_SCK_B,
+ FN_SCIF_CLK, 0, FN_BPFCLK_E,
+ 0, 0, }
+ },
+
+ /* IPSR7 - 10 */
+
+ { PINMUX_CFG_REG_VAR("IPSR11", 0xE606004C, 32,
+ 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2,
+ 3, 3, 3, 3, 3) {
+ /* IP11_31_30 [2] */
+ FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C, 0,
+ /* IP11_29_28 [2] */
+ FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C, 0,
+ /* IP11_27 [1] */
+ FN_VI1_DATA7, FN_AVB_MDC,
+ /* IP11_26 [1] */
+ FN_VI1_DATA6, FN_AVB_MAGIC,
+ /* IP11_25 [1] */
+ FN_VI1_DATA5, FN_AVB_RX_DV,
+ /* IP11_24 [1] */
+ FN_VI1_DATA4, FN_AVB_MDIO,
+ /* IP11_23 [1] */
+ FN_VI1_DATA3, FN_AVB_RX_ER,
+ /* IP11_22 [1] */
+ FN_VI1_DATA2, FN_AVB_RXD7,
+ /* IP11_21 [1] */
+ FN_VI1_DATA1, FN_AVB_RXD6,
+ /* IP11_20 [1] */
+ FN_VI1_DATA0, FN_AVB_RXD5,
+ /* IP11_19 [1] */
+ FN_VI1_CLK, FN_AVB_RXD4,
+ /* IP11_18_17 [2] */
+ FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B, 0,
+ /* IP11_16_15 [2] */
+ FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B, 0,
+ /* IP11_14_12 [3] */
+ FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B,
+ FN_RX4_B, FN_SCIFA4_RXD_B,
+ 0, 0, 0,
+ /* IP11_11_9 [3] */
+ FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B,
+ FN_TX4_B, FN_SCIFA4_TXD_B,
+ 0, 0, 0,
+ /* IP11_8_6 [3] */
+ FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+ FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D, 0,
+ /* IP11_5_3 [3] */
+ FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+ 0, 0, 0,
+ /* IP11_2_0 [3] */
+ FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+ 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR12", 0xE6060050, 32,
+ 2, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, 2, 2) {
+ /* IP12_31_30 [2] */
+ 0, 0, 0, 0,
+ /* IP12_29_27 [3] */
+ FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+ FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+ 0, 0, 0,
+ /* IP12_26_24 [3] */
+ FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+ FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+ 0, 0, 0,
+ /* IP12_23_22 [2] */
+ FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C, 0,
+ /* IP12_21_20 [2] */
+ FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C, 0,
+ /* IP12_19_18 [2] */
+ FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C, 0,
+ /* IP12_17_16 [2] */
+ FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+ /* IP12_15_13 [3] */
+ FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+ FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+ 0, 0, 0,
+ /* IP12_12_10 [3] */
+ FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+ FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+ 0, 0, 0,
+ /* IP12_9_7 [3] */
+ FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C,
+ FN_SDA2_D, FN_MSIOF1_SCK_E,
+ 0, 0, 0,
+ /* IP12_6_4 [3] */
+ FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+ FN_SCL2_D, FN_MSIOF1_RXD_E,
+ 0, 0, 0,
+ /* IP12_3_2 [2] */
+ FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+ /* IP12_1_0 [2] */
+ FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR13", 0xE6060054, 32,
+ 1, 3, 1, 1, 1, 2, 1, 3, 3, 1, 1, 1, 1, 1, 1,
+ 3, 2, 2, 3) {
+ /* IP13_31 [1] */
+ 0, 0,
+ /* IP13_30_28 [3] */
+ FN_SD1_CD, FN_PWM0, FN_TPU_TO0, FN_SCL1_C,
+ 0, 0, 0, 0,
+ /* IP13_27 [1] */
+ FN_SD1_DATA3, FN_IERX_B,
+ /* IP13_26 [1] */
+ FN_SD1_DATA2, FN_IECLK_B,
+ /* IP13_25 [1] */
+ FN_SD1_DATA1, FN_IETX_B,
+ /* IP13_24_23 [2] */
+ FN_SD1_DATA0, FN_SPEEDIN_B, 0, 0,
+ /* IP13_22 [1] */
+ FN_SD1_CMD, FN_REMOCON_B,
+ /* IP13_21_19 [3] */
+ FN_SD0_WP, FN_MMC_D7_B, FN_SIM0_D_B, FN_CAN0_TX_F,
+ FN_SCIFA5_RXD_B, FN_RX3_C,
+ 0, 0,
+ /* IP13_18_16 [3] */
+ FN_SD0_CD, FN_MMC_D6_B, FN_SIM0_RST_B, FN_CAN0_RX_F,
+ FN_SCIFA5_TXD_B, FN_TX3_C,
+ 0, 0,
+ /* IP13_15 [1] */
+ FN_SD0_DATA3, FN_SSL_B,
+ /* IP13_14 [1] */
+ FN_SD0_DATA2, FN_IO3_B,
+ /* IP13_13 [1] */
+ FN_SD0_DATA1, FN_IO2_B,
+ /* IP13_12 [1] */
+ FN_SD0_DATA0, FN_MISO_IO1_B,
+ /* IP13_11 [1] */
+ FN_SD0_CMD, FN_MOSI_IO0_B,
+ /* IP13_10 [1] */
+ FN_SD0_CLK, FN_SPCLK_B,
+ /* IP13_9_7 [3] */
+ FN_STP_OPWM_0, FN_AVB_GTX_CLK, FN_PWM0_B,
+ FN_ADICHS2_B, FN_MSIOF0_TXD_C,
+ 0, 0, 0,
+ /* IP13_6_5 [2] */
+ FN_STP_ISSYNC_0, FN_AVB_COL, FN_ADICHS1_B, FN_MSIOF0_RXD_C,
+ /* IP13_4_3 [2] */
+ FN_STP_ISEN_0, FN_AVB_TX_CLK, FN_ADICHS0_B, FN_MSIOF0_SS2_C,
+ /* IP13_2_0 [3] */
+ FN_STP_ISD_0, FN_AVB_TX_ER, FN_SCIFB2_SCK_C,
+ FN_ADICLK_B, FN_MSIOF0_SS1_C,
+ 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR14", 0xE6060058, 32,
+ 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, 1, 1, 2) {
+ /* IP14_31_29 [3] */
+ FN_MSIOF0_SS2, FN_MMC_D7, FN_ADICHS2, FN_RX0_E,
+ FN_VI1_VSYNC_N_C, FN_SDA7_C, FN_VI1_G5_B, 0,
+ /* IP14_28_26 [3] */
+ FN_MSIOF0_SS1, FN_MMC_D6, FN_ADICHS1, FN_TX0_E,
+ FN_VI1_HSYNC_N_C, FN_SCL7_C, FN_VI1_G4_B, 0,
+ /* IP14_25_23 [3] */
+ FN_MSIOF0_RXD, FN_ADICHS0, 0, FN_VI1_DATA0_C, FN_VI1_G3_B,
+ 0, 0, 0,
+ /* IP14_22_20 [3] */
+ FN_MSIOF0_TXD, FN_ADICLK, 0, FN_VI1_FIELD_C, FN_VI1_G2_B,
+ 0, 0, 0,
+ /* IP14_19_17 [3] */
+ FN_MSIOF0_SYNC, FN_TX2_C, FN_ADICS_SAMP, 0,
+ FN_VI1_CLKENB_C, FN_VI1_G1_B,
+ 0, 0,
+ /* IP14_16_14 [3] */
+ FN_MSIOF0_SCK, FN_RX2_C, FN_ADIDATA, 0,
+ FN_VI1_CLK_C, FN_VI1_G0_B,
+ 0, 0,
+ /* IP14_13_11 [3] */
+ FN_SD2_WP, FN_MMC_D5, FN_SDA8_C, FN_RX5_B, FN_SCIFA5_RXD_C,
+ 0, 0, 0,
+ /* IP14_10_8 [3] */
+ FN_SD2_CD, FN_MMC_D4, FN_SCL8_C, FN_TX5_B, FN_SCIFA5_TXD_C,
+ 0, 0, 0,
+ /* IP14_7 [1] */
+ FN_SD2_DATA3, FN_MMC_D3,
+ /* IP14_6 [1] */
+ FN_SD2_DATA2, FN_MMC_D2,
+ /* IP14_5 [1] */
+ FN_SD2_DATA1, FN_MMC_D1,
+ /* IP14_4 [1] */
+ FN_SD2_DATA0, FN_MMC_D0,
+ /* IP14_3 [1] */
+ FN_SD2_CMD, FN_MMC_CMD,
+ /* IP14_2 [1] */
+ FN_SD2_CLK, FN_MMC_CLK,
+ /* IP14_1_0 [2] */
+ FN_SD1_WP, FN_PWM1_B, FN_SDA1_C, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR15", 0xE606005C, 32,
+ 2, 3, 3, 3, 3, 3, 3, 3, 3, 2, 2, 2) {
+ /* IP15_31_30 [2] */
+ 0, 0, 0, 0,
+ /* IP15_29_27 [3] */
+ FN_HTX0, FN_SCIFB0_TXD, 0, FN_GLO_SCLK_C,
+ FN_CAN0_TX_B, FN_VI1_DATA5_C,
+ 0, 0,
+ /* IP15_26_24 [3] */
+ FN_HRX0, FN_SCIFB0_RXD, 0, FN_GLO_Q1_C,
+ FN_CAN0_RX_B, FN_VI1_DATA4_C,
+ 0, 0,
+ /* IP15_23_21 [3] */
+ FN_HSCK0, FN_SCIFB0_SCK, 0, FN_GLO_Q0_C, FN_CAN_CLK,
+ FN_TCLK2, FN_VI1_DATA3_C, 0,
+ /* IP15_20_18 [3] */
+ FN_HRTS0_N, FN_SCIFB0_RTS_N, 0, FN_GLO_I1_C, FN_VI1_DATA2_C,
+ 0, 0, 0,
+ /* IP15_17_15 [3] */
+ FN_HCTS0_N, FN_SCIFB0_CTS_N, 0, FN_GLO_I0_C,
+ FN_TCLK1, FN_VI1_DATA1_C,
+ 0, 0,
+ /* IP15_14_12 [3] */
+ FN_GPS_MAG, FN_RX4_C, FN_SCIFA4_RXD_C, FN_PWM6,
+ FN_VI1_G7_B, FN_SCIFA3_SCK_C,
+ 0, 0,
+ /* IP15_11_9 [3] */
+ FN_GPS_SIGN, FN_TX4_C, FN_SCIFA4_TXD_C, FN_PWM5,
+ FN_VI1_G6_B, FN_SCIFA3_RXD_C,
+ 0, 0,
+ /* IP15_8_6 [3] */
+ FN_GPS_CLK, FN_DU1_DOTCLKIN_C, FN_AUDIO_CLKB_B,
+ FN_PWM5_B, FN_SCIFA3_TXD_C,
+ 0, 0, 0,
+ /* IP15_5_4 [2] */
+ FN_SIM0_D, FN_IERX, FN_CAN1_RX_D, 0,
+ /* IP15_3_2 [2] */
+ FN_SIM0_CLK, FN_IECLK, FN_CAN_CLK_C, 0,
+ /* IP15_1_0 [2] */
+ FN_SIM0_RST, FN_IETX, FN_CAN1_TX_D, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR16", 0xE6060160, 32,
+ 4, 4, 4, 4, 4, 2, 2, 2, 3, 3) {
+ /* IP16_31_28 [4] */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* IP16_27_24 [4] */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* IP16_23_20 [4] */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* IP16_19_16 [4] */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* IP16_15_12 [4] */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* IP16_11_10 [2] */
+ FN_HRTS1_N, FN_SCIFB1_RTS_N, FN_MLB_DAT, FN_CAN1_RX_B,
+ /* IP16_9_8 [2] */
+ FN_HCTS1_N, FN_SCIFB1_CTS_N, FN_MLB_SIG, FN_CAN1_TX_B,
+ /* IP16_7_6 [2] */
+ FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CK, FN_GLO_RFON_C,
+ /* IP16_5_3 [3] */
+ FN_HTX1, FN_SCIFB1_TXD, FN_VI1_R1_B,
+ FN_GLO_SS_C, FN_VI1_DATA7_C,
+ 0, 0, 0,
+ /* IP16_2_0 [3] */
+ FN_HRX1, FN_SCIFB1_RXD, FN_VI1_R0_B,
+ FN_GLO_SDATA_C, FN_VI1_DATA6_C,
+ 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL", 0xE6060090, 32,
+ 1, 2, 2, 2, 3, 2, 1, 1, 1, 1,
+ 3, 2, 2, 2, 1, 2, 2, 2) {
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIF1 [2] */
+ FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+ /* SEL_SCIFB [2] */
+ FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+ /* SEL_SCIFB2 [2] */
+ FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1,
+ FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+ /* SEL_SCIFB1 [3] */
+ FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1,
+ FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+ 0, 0, 0, 0,
+ /* SEL_SCIFA1 [2] */
+ FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, 0,
+ /* SEL_SSI9 [1] */
+ FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+ /* SEL_SCFA [1] */
+ FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+ /* SEL_QSP [1] */
+ FN_SEL_QSP_0, FN_SEL_QSP_1,
+ /* SEL_SSI7 [1] */
+ FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+ /* SEL_HSCIF1 [3] */
+ FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2,
+ FN_SEL_HSCIF1_3, FN_SEL_HSCIF1_4,
+ 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_VI1 [2] */
+ FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_TMU [1] */
+ FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+ /* SEL_LBS [2] */
+ FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+ /* SEL_TSIF0 [2] */
+ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ /* SEL_SOF0 [2] */
+ FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32,
+ 3, 1, 1, 3, 2, 1, 1, 2, 2,
+ 1, 3, 2, 1, 2, 2, 2, 1, 1, 1) {
+ /* SEL_SCIF0 [3] */
+ FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
+ FN_SEL_SCIF0_3, FN_SEL_SCIF0_4,
+ 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIF [1] */
+ FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+ /* SEL_CAN0 [3] */
+ FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+ FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+ 0, 0,
+ /* SEL_CAN1 [2] */
+ FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIFA2 [1] */
+ FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+ /* SEL_SCIF4 [2] */
+ FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_ADG [1] */
+ FN_SEL_ADG_0, FN_SEL_ADG_1,
+ /* SEL_FM [3] */
+ FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2,
+ FN_SEL_FM_3, FN_SEL_FM_4,
+ 0, 0, 0,
+ /* SEL_SCIFA5 [2] */
+ FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_GPS [2] */
+ FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+ /* SEL_SCIFA4 [2] */
+ FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2, 0,
+ /* SEL_SCIFA3 [2] */
+ FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2, 0,
+ /* SEL_SIM [1] */
+ FN_SEL_SIM_0, FN_SEL_SIM_1,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SSI8 [1] */
+ FN_SEL_SSI8_0, FN_SEL_SSI8_1, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL3", 0xE6060098, 32,
+ 2, 2, 2, 2, 2, 2, 2, 2,
+ 1, 1, 2, 2, 3, 2, 2, 2, 1) {
+ /* SEL_HSCIF2 [2] */
+ FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1,
+ FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+ /* SEL_CANCLK [2] */
+ FN_SEL_CANCLK_0, FN_SEL_CANCLK_1,
+ FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+ /* SEL_IIC8 [2] */
+ FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2, 0,
+ /* SEL_IIC7 [2] */
+ FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2, 0,
+ /* SEL_IIC4 [2] */
+ FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2, 0,
+ /* SEL_IIC3 [2] */
+ FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+ /* SEL_SCIF3 [2] */
+ FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+ /* SEL_IEB [2] */
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0,
+ /* SEL_MMC [1] */
+ FN_SEL_MMC_0, FN_SEL_MMC_1,
+ /* SEL_SCIF5 [1] */
+ FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_IIC2 [2] */
+ FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+ /* SEL_IIC1 [3] */
+ FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+ FN_SEL_IIC1_4,
+ 0, 0, 0,
+ /* SEL_IIC0 [2] */
+ FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL4", 0xE606009C, 32,
+ 3, 2, 2, 1, 1, 1, 1, 3, 2,
+ 2, 3, 1, 1, 1, 2, 2, 2, 2) {
+ /* SEL_SOF1 [3] */
+ FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+ FN_SEL_SOF1_4,
+ 0, 0, 0,
+ /* SEL_HSCIF0 [2] */
+ FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, 0,
+ /* SEL_DIS [2] */
+ FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_RAD [1] */
+ FN_SEL_RAD_0, FN_SEL_RAD_1,
+ /* SEL_RCN [1] */
+ FN_SEL_RCN_0, FN_SEL_RCN_1,
+ /* SEL_RSP [1] */
+ FN_SEL_RSP_0, FN_SEL_RSP_1,
+ /* SEL_SCIF2 [3] */
+ FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
+ FN_SEL_SCIF2_3, FN_SEL_SCIF2_4,
+ 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_SOF2 [3] */
+ FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2,
+ FN_SEL_SOF2_3, FN_SEL_SOF2_4,
+ 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SSI1 [1] */
+ FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+ /* SEL_SSI0 [1] */
+ FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+ /* SEL_SSP [2] */
+ FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } },
+ { PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_1_25_IN, GP_1_25_OUT,
+ GP_1_24_IN, GP_1_24_OUT,
+ GP_1_23_IN, GP_1_23_OUT,
+ GP_1_22_IN, GP_1_22_OUT,
+ GP_1_21_IN, GP_1_21_OUT,
+ GP_1_20_IN, GP_1_20_OUT,
+ GP_1_19_IN, GP_1_19_OUT,
+ GP_1_18_IN, GP_1_18_OUT,
+ GP_1_17_IN, GP_1_17_OUT,
+ GP_1_16_IN, GP_1_16_OUT,
+ GP_1_15_IN, GP_1_15_OUT,
+ GP_1_14_IN, GP_1_14_OUT,
+ GP_1_13_IN, GP_1_13_OUT,
+ GP_1_12_IN, GP_1_12_OUT,
+ GP_1_11_IN, GP_1_11_OUT,
+ GP_1_10_IN, GP_1_10_OUT,
+ GP_1_9_IN, GP_1_9_OUT,
+ GP_1_8_IN, GP_1_8_OUT,
+ GP_1_7_IN, GP_1_7_OUT,
+ GP_1_6_IN, GP_1_6_OUT,
+ GP_1_5_IN, GP_1_5_OUT,
+ GP_1_4_IN, GP_1_4_OUT,
+ GP_1_3_IN, GP_1_3_OUT,
+ GP_1_2_IN, GP_1_2_OUT,
+ GP_1_1_IN, GP_1_1_OUT,
+ GP_1_0_IN, GP_1_0_OUT, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL2", 0xE6052004, 32, 1) { GP_INOUTSEL(2) } },
+ { PINMUX_CFG_REG("INOUTSEL3", 0xE6053004, 32, 1) { GP_INOUTSEL(3) } },
+ { PINMUX_CFG_REG("INOUTSEL4", 0xE6054004, 32, 1) { GP_INOUTSEL(4) } },
+ { PINMUX_CFG_REG("INOUTSEL5", 0xE6055004, 32, 1) { GP_INOUTSEL(5) } },
+ { PINMUX_CFG_REG("INOUTSEL6", 0xE6055404, 32, 1) { GP_INOUTSEL(6) } },
+ { PINMUX_CFG_REG("INOUTSEL7", 0xE6055804, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_7_25_IN, GP_7_25_OUT,
+ GP_7_24_IN, GP_7_24_OUT,
+ GP_7_23_IN, GP_7_23_OUT,
+ GP_7_22_IN, GP_7_22_OUT,
+ GP_7_21_IN, GP_7_21_OUT,
+ GP_7_20_IN, GP_7_20_OUT,
+ GP_7_19_IN, GP_7_19_OUT,
+ GP_7_18_IN, GP_7_18_OUT,
+ GP_7_17_IN, GP_7_17_OUT,
+ GP_7_16_IN, GP_7_16_OUT,
+ GP_7_15_IN, GP_7_15_OUT,
+ GP_7_14_IN, GP_7_14_OUT,
+ GP_7_13_IN, GP_7_13_OUT,
+ GP_7_12_IN, GP_7_12_OUT,
+ GP_7_11_IN, GP_7_11_OUT,
+ GP_7_10_IN, GP_7_10_OUT,
+ GP_7_9_IN, GP_7_9_OUT,
+ GP_7_8_IN, GP_7_8_OUT,
+ GP_7_7_IN, GP_7_7_OUT,
+ GP_7_6_IN, GP_7_6_OUT,
+ GP_7_5_IN, GP_7_5_OUT,
+ GP_7_4_IN, GP_7_4_OUT,
+ GP_7_3_IN, GP_7_3_OUT,
+ GP_7_2_IN, GP_7_2_OUT,
+ GP_7_1_IN, GP_7_1_OUT,
+ GP_7_0_IN, GP_7_0_OUT, }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("INDT0", 0xE6050008, 32) { GP_INDT(0) } },
+ { PINMUX_DATA_REG("INDT1", 0xE6051008, 32) {
+ 0, 0, 0, 0,
+ 0, 0, GP_1_25_DATA, GP_1_24_DATA,
+ GP_1_23_DATA, GP_1_22_DATA, GP_1_21_DATA, GP_1_20_DATA,
+ GP_1_19_DATA, GP_1_18_DATA, GP_1_17_DATA, GP_1_16_DATA,
+ GP_1_15_DATA, GP_1_14_DATA, GP_1_13_DATA, GP_1_12_DATA,
+ GP_1_11_DATA, GP_1_10_DATA, GP_1_9_DATA, GP_1_8_DATA,
+ GP_1_7_DATA, GP_1_6_DATA, GP_1_5_DATA, GP_1_4_DATA,
+ GP_1_3_DATA, GP_1_2_DATA, GP_1_1_DATA, GP_1_0_DATA }
+ },
+ { PINMUX_DATA_REG("INDT2", 0xE6052008, 32) { GP_INDT(2) } },
+ { PINMUX_DATA_REG("INDT3", 0xE6053008, 32) { GP_INDT(3) } },
+ { PINMUX_DATA_REG("INDT4", 0xE6054008, 32) { GP_INDT(4) } },
+ { PINMUX_DATA_REG("INDT5", 0xE6055008, 32) { GP_INDT(5) } },
+ { PINMUX_DATA_REG("INDT6", 0xE6055408, 32) { GP_INDT(6) } },
+ { PINMUX_DATA_REG("INDT7", 0xE6055808, 32) {
+ 0, 0, 0, 0,
+ 0, 0, GP_7_25_DATA, GP_7_24_DATA,
+ GP_7_23_DATA, GP_7_22_DATA, GP_7_21_DATA, GP_7_20_DATA,
+ GP_7_19_DATA, GP_7_18_DATA, GP_7_17_DATA, GP_7_16_DATA,
+ GP_7_15_DATA, GP_7_14_DATA, GP_7_13_DATA, GP_7_12_DATA,
+ GP_7_11_DATA, GP_7_10_DATA, GP_7_9_DATA, GP_7_8_DATA,
+ GP_7_7_DATA, GP_7_6_DATA, GP_7_5_DATA, GP_7_4_DATA,
+ GP_7_3_DATA, GP_7_2_DATA, GP_7_1_DATA, GP_7_0_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info r8a7793_pinmux_info = {
+ .name = "r8a7793_pfc",
+
+ .unlock_reg = 0xe6060000, /* PMMR */
+
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_GP_0_0,
+ .last_gpio = GPIO_FN_CAN1_RX_B,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7793_pinmux_init(void)
+{
+ register_pinmux(&r8a7793_pinmux_info);
+}
}
#endif
+void clock_set_pll3(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (clk == 0) {
+ clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+ return;
+ }
+
+ /* PLL3 rate = 3000000 * m */
+ writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+ CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg);
+}
+
unsigned int clock_get_pll5p(void)
{
struct sunxi_ccm_reg *const ccm =
int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
return 24000000 * n * k / 2;
}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+ int pll = clock_get_pll5p();
+ int div = 1;
+
+ while ((pll / div) > hz)
+ div++;
+
+ writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P |
+ CCM_DE_CTRL_M(div), clk_cfg);
+}
}
#endif
+void clock_set_pll3(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */
+
+ if (clk == 0) {
+ clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+ return;
+ }
+
+ /* PLL3 rate = 24000000 * n / m */
+ writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+ CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m),
+ &ccm->pll3_cfg);
+}
+
void clock_set_pll5(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
return 24000000 * n * k / 2;
}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+ int pll = clock_get_pll6() * 2;
+ int div = 1;
+
+ while ((pll / div) > hz)
+ div++;
+
+ writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div),
+ clk_cfg);
+}
#ifdef CONFIG_MACH_SUN4I
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (on)
- setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
+ setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
else
- clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
+ clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
#endif
}
writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST,
&mctl_phy->ptr0);
- /* Unknown magic performed by boot0 */
- if ((readl(SUNXI_RTC_BASE + 0x20c) & 3) == 2)
- setbits_le32(&mctl_phy->ptr0, 1 << 18);
writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1);
writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2);
+++ /dev/null
-#
-# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
+++ /dev/null
-#
-# (C) Copyright 2013-2014
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
writel(0, &dc->win.h_initial_dda);
writel(0, &dc->win.v_initial_dda);
- h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1);
- v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1);
+ h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
+ v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
val = h_dda << H_DDA_INC_SHIFT;
val |= v_dda << V_DDA_INC_SHIFT;
+++ /dev/null
-#
-# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
obj-y += cache.o
obj-y += tlb.o
obj-y += transition.o
+
+obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
#
obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
-obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o
+ifneq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
+obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
+obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
+obj-y += spl.o
+endif
writel(0, ram_address);
}
+static int ddr2_decodtype_is_seq(u32 cr)
+{
+#if defined(CONFIG_SAMA5D3)
+ if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)
+ return 0;
+#endif
+ return 1;
+}
+
int ddr2_init(const unsigned int ram_address,
const struct atmel_mpddr *mpddr_value)
{
/* Compute bank offset according to NC in configuration register */
ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
- if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
- ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+ if (ddr2_decodtype_is_seq(mpddr_value->cr))
+ ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/gpio.h>
+
+int sdramc_initialize(unsigned int sdram_address, const struct sdramc_reg *p)
+{
+ struct sdramc_reg *reg = (struct sdramc_reg *)ATMEL_BASE_SDRAMC;
+ unsigned int i;
+
+ /* SDRAM feature must be in the configuration register */
+ writel(p->cr, ®->cr);
+
+ /* The SDRAM memory type must be set in the Memory Device Register */
+ writel(p->mdr, ®->mdr);
+
+ /*
+ * The minimum pause of 200 us is provided to precede any single
+ * toggle
+ */
+ for (i = 0; i < 1000; i++)
+ ;
+
+ /* A NOP command is issued to the SDRAM devices */
+ writel(AT91_SDRAMC_MODE_NOP, ®->mr);
+ writel(0x00000000, sdram_address);
+
+ /* An All Banks Precharge command is issued to the SDRAM devices */
+ writel(AT91_SDRAMC_MODE_PRECHARGE, ®->mr);
+ writel(0x00000000, sdram_address);
+
+ for (i = 0; i < 10000; i++)
+ ;
+
+ /* Eight auto-refresh cycles are provided */
+ for (i = 0; i < 8; i++) {
+ writel(AT91_SDRAMC_MODE_REFRESH, ®->mr);
+ writel(0x00000001 + i, sdram_address + 4 + 4 * i);
+ }
+
+ /*
+ * A Mode Register set (MRS) cyscle is issued to program the
+ * SDRAM parameters(TCSR, PASR, DS)
+ */
+ writel(AT91_SDRAMC_MODE_LMR, ®->mr);
+ writel(0xcafedede, sdram_address + 0x24);
+
+ /*
+ * The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and perform a write access at
+ * any location in the SDRAM.
+ */
+ writel(AT91_SDRAMC_MODE_NORMAL, ®->mr);
+ writel(0x00000000, sdram_address); /* Perform Normal mode */
+
+ /*
+ * Write the refresh rate into the count field in the SDRAMC
+ * Refresh Timer Rgister.
+ */
+ writel(p->tr, ®->tr);
+
+ return 0;
+}
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_wdt.h>
#include <asm/arch/clk.h>
#include <spl.h>
-static void at91_disable_wdt(void)
+void at91_disable_wdt(void)
{
struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
writel(AT91_WDT_MR_WDDIS, &wdt->mr);
}
-static void switch_to_main_crystal_osc(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- u32 tmp;
-
- tmp = readl(&pmc->mor);
- tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff);
- tmp &= ~AT91_PMC_MOR_KEY(0xff);
- tmp |= AT91_PMC_MOR_MOSCEN;
- tmp |= AT91_PMC_MOR_OSCOUNT(8);
- tmp |= AT91_PMC_MOR_KEY(0x37);
- writel(tmp, &pmc->mor);
- while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
- ;
-
- tmp = readl(&pmc->mor);
- tmp &= ~AT91_PMC_MOR_OSCBYPASS;
- tmp &= ~AT91_PMC_MOR_KEY(0xff);
- tmp |= AT91_PMC_MOR_KEY(0x37);
- writel(tmp, &pmc->mor);
-
- tmp = readl(&pmc->mor);
- tmp |= AT91_PMC_MOR_MOSCSEL;
- tmp &= ~AT91_PMC_MOR_KEY(0xff);
- tmp |= AT91_PMC_MOR_KEY(0x37);
- writel(tmp, &pmc->mor);
-
- while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
- ;
-
- tmp = readl(&pmc->mor);
- tmp &= ~AT91_PMC_MOR_MOSCRCEN;
- tmp &= ~AT91_PMC_MOR_KEY(0xff);
- tmp |= AT91_PMC_MOR_KEY(0x37);
- writel(tmp, &pmc->mor);
-}
-
-void at91_plla_init(u32 pllar)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
- writel(pllar, &pmc->pllar);
- while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
- ;
-}
-
-void at91_mck_init(u32 mckr)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- u32 tmp;
-
- tmp = readl(&pmc->mckr);
- tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
- AT91_PMC_MCKR_MDIV_MASK |
- AT91_PMC_MCKR_PLLADIV_2);
- tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
- AT91_PMC_MCKR_MDIV_MASK |
- AT91_PMC_MCKR_PLLADIV_2);
- writel(tmp, &pmc->mckr);
-
- while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
- ;
-}
-
-
u32 spl_boot_device(void)
{
#ifdef CONFIG_SYS_USE_MMC
hang();
}
}
-
-void s_init(void)
-{
- switch_to_main_crystal_osc();
-
- /* disable watchdog */
- at91_disable_wdt();
-
- /* PMC configuration */
- at91_pmc_init();
-
- at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
-
- timer_init();
-
- board_early_init_f();
-
- preloader_console_init();
-
- mem_init();
-}
--- /dev/null
+/*
+ * (C) Copyright 2014 DENX Software Engineering
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Based on:
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void enable_ext_reset(void)
+{
+ struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
+
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
+
+void lowlevel_clock_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) {
+ /* Enable Main Oscillator */
+ writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor);
+
+ /* Wait until Main Oscillator is stable */
+ while (!(readl(&pmc->sr) & AT91_PMC_MOSCS))
+ ;
+ }
+
+ /* After stabilization, switch to Main Oscillator */
+ if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) {
+ unsigned long tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~AT91_PMC_CSS;
+ tmp |= AT91_PMC_CSS_MAIN;
+ writel(tmp, &pmc->mckr);
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+
+ tmp &= ~AT91_PMC_PRES;
+ tmp |= AT91_PMC_PRES_1;
+ writel(tmp, &pmc->mckr);
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+ }
+
+ return;
+}
+
+void __weak matrix_init(void)
+{
+}
+
+void __weak at91_spl_board_init(void)
+{
+}
+
+void spl_board_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ lowlevel_clock_init();
+ at91_disable_wdt();
+
+ /*
+ * At this stage the main oscillator is supposed to be enabled
+ * PCK = MCK = MOSC
+ */
+ writel(0x00, &pmc->pllicpr);
+
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+ at91_plla_init(CONFIG_SYS_AT91_PLLA);
+
+ /* PCK = PLLA = 2 * MCK */
+ at91_mck_init(CONFIG_SYS_MCKR);
+
+ /* Switch MCK on PLLA output */
+ at91_mck_init(CONFIG_SYS_MCKR_CSS);
+
+#if defined(CONFIG_SYS_AT91_PLLB)
+ /* Configure PLLB */
+ at91_pllb_init(CONFIG_SYS_AT91_PLLB);
+#endif
+
+ /* Enable External Reset */
+ enable_ext_reset();
+
+ /* Initialize matrix */
+ matrix_init();
+
+ gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK;
+ /*
+ * init timer long enough for using in spl.
+ */
+ timer_init();
+
+ /* enable clocks for all PIOs */
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ /* init console */
+ at91_seriald_hw_init();
+ preloader_console_init();
+
+ mem_init();
+
+ at91_spl_board_init();
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void switch_to_main_crystal_osc(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff);
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_MOSCEN;
+ tmp |= AT91_PMC_MOR_OSCOUNT(8);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+ while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
+ ;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_OSCBYPASS;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+
+ tmp = readl(&pmc->mor);
+ tmp |= AT91_PMC_MOR_MOSCSEL;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
+ ;
+
+ /* Wait until MAINRDY field is set to make sure main clock is stable */
+ while (!(readl(&pmc->mcfr) & AT91_PMC_MAINRDY))
+ ;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_MOSCRCEN;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+}
+
+void s_init(void)
+{
+ switch_to_main_crystal_osc();
+
+ /* disable watchdog */
+ at91_disable_wdt();
+
+ /* PMC configuration */
+ at91_pmc_init();
+
+ at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+
+ timer_init();
+
+ board_early_init_f();
+
+ preloader_console_init();
+
+ mem_init();
+}
. = ALIGN(4);
. = .;
+#ifdef CONFIG_SPL_DM
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list_*_driver_*)));
+ KEEP(*(SORT(.u_boot_list_*_uclass_*)));
+ }
+#endif
+ . = ALIGN(4);
__image_copy_end = .;
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <ipu_pixfmt.h>
+#include <thermal.h>
+#include <sata.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
{
u32 cpurev;
+#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
+ struct udevice *thermal_dev;
+ int cpu_tmp, ret;
+#endif
+
cpurev = get_cpu_rev();
printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n",
(cpurev & 0x000F0) >> 4,
(cpurev & 0x0000F) >> 0,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
+ ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
+ if (!ret) {
+ ret = thermal_get_temp(thermal_dev, &cpu_tmp);
+
+ if (!ret)
+ printf("CPU: Temperature %d C\n", cpu_tmp);
+ else
+ printf("CPU: Temperature: invalid sensor data\n");
+ } else {
+ printf("CPU: Temperature: Can't find sensor device\n");
+ }
+#endif
+
printf("Reset cause: %s\n", get_reset_cause());
return 0;
}
return get_periph_clk() / (ahb_podf + 1);
}
-#if defined(CONFIG_VIDEO_IPUV3)
void arch_preboot_os(void)
{
+#if defined(CONFIG_CMD_SATA)
+ sata_stop();
+#endif
+#if defined(CONFIG_VIDEO_IPUV3)
/* disable video before launching O/S */
ipuv3_fb_shutdown();
-}
#endif
+}
+
+void set_chipselect_size(int const cs_size)
+{
+ unsigned int reg;
+ struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ reg = readl(&iomuxc_regs->gpr[1]);
+
+ switch (cs_size) {
+ case CS0_128:
+ reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */
+ reg |= 0x5;
+ break;
+ case CS0_64M_CS1_64M:
+ reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */
+ reg |= 0x1B;
+ break;
+ case CS0_64M_CS1_32M_CS2_32M:
+ reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */
+ reg |= 0x4B;
+ break;
+ case CS0_32M_CS1_32M_CS2_32M_CS3_32M:
+ reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */
+ reg |= 0x249;
+ break;
+ default:
+ printf("Unknown chip select size: %d\n", cs_size);
+ break;
+ }
+
+ writel(reg, &iomuxc_regs->gpr[1]);
+}
* SPDX-License-Identifier: GPL-2.0+
*/
-IMAGE_VERSION 2
+IMAGE_VERSION 2
BOOT_FROM sd
#define _ARMD1_CONFIG_H
#include <asm/arch/armada100.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
/* default Dcache Line length for armada100 */
#define CONFIG_SYS_CACHELINE_SIZE 32
void at91_uhp_hw_init(void);
void at91_lcd_hw_init(void);
void at91_plla_init(u32 pllar);
+void at91_pllb_init(u32 pllar);
void at91_mck_init(u32 mckr);
void at91_pmc_init(void);
void mem_init(void);
void at91_phy_reset(void);
+void at91_sdram_hw_init(void);
+void at91_mck_init(u32 mckr);
+void at91_spl_board_init(void);
+void at91_disable_wdt(void);
+void matrix_init(void);
#endif /* AT91_COMMON_H */
#define AT91_PMC_PLLXR_DIV(x) (x & 0xFF)
#define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8)
#define AT91_PMC_PLLXR_OUT(x) ((x & 0x03) << 14)
-#ifdef CONFIG_SAMA5D3
+#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7F) << 18)
#else
#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7FF) << 16)
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
#define AT91_PMC_MCKR_CSS_MASK 0x00000003
-#ifdef CONFIG_SAMA5D3
+#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
#define AT91_PMC_MCKR_PRES_1 0x00000000
#define AT91_PMC_MCKR_PRES_2 0x00000010
#define AT91_PMC_MCKR_PRES_4 0x00000020
#else
#define AT91_PMC_MCKR_MDIV_1 0x00000000
#define AT91_PMC_MCKR_MDIV_2 0x00000100
-#ifdef CONFIG_SAMA5D3
+#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
#define AT91_PMC_MCKR_MDIV_3 0x00000300
#endif
#define AT91_PMC_MCKR_MDIV_4 0x00000200
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
#endif
+#define AT91_PMC_MCKR_PLLADIV_MASK 0x00003000
#define AT91_PMC_MCKR_PLLADIV_1 0x00000000
#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
+#define AT91_PMC_MCKR_H32MXDIV 0x01000000
+
#define AT91_PMC_IXR_MOSCS 0x00000001
#define AT91_PMC_IXR_LOCKA 0x00000002
#define AT91_PMC_IXR_LOCKB 0x00000004
#define __AT91RM9200_H__
#define CONFIG_AT91FAMILY /* it's a member of AT91 family */
-#define CONFIG_ARM920T /* it's an ARM920T Core */
#define CONFIG_ARCH_CPU_INIT /* we need arch_cpu_init() for hw timers */
#define CONFIG_AT91_GPIO /* and require always gpio features */
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
#define ATMEL_BASE_SDRAMC 0xffffea00
#define ATMEL_BASE_SMC 0xffffec00
#define ATMEL_BASE_MATRIX 0xffffee00
+#define ATMEL_BASE_CCFG 0xffffef14
#define ATMEL_BASE_AIC 0xfffff000
#define ATMEL_BASE_DBGU 0xfffff200
#define ATMEL_BASE_PIOA 0xfffff400
/*
* Other misc defines
*/
+#ifndef CONFIG_DM_GPIO
#define ATMEL_PIO_PORTS 3 /* these SoCs have 3 PIO */
-#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
+#endif
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
/*
* SoC specific defines
#define AT91_MATRIX_DBPUC (1 << 8)
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_IOSR_SEL (1 << 17)
+
+/* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0)
+#define AT91_MATRIX_SLOT_CYCLE_(x) (x << 0)
#endif
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
#define AT91_ASM_SDRAMC_CR (ATMEL_BASE_SDRAMC + 0x08)
#define AT91_ASM_SDRAMC_MDR (ATMEL_BASE_SDRAMC + 0x24)
+#else
+struct sdramc_reg {
+ u32 mr;
+ u32 tr;
+ u32 cr;
+ u32 lpr;
+ u32 ier;
+ u32 idr;
+ u32 imr;
+ u32 isr;
+ u32 mdr;
+};
+
+int sdramc_initialize(unsigned int sdram_address,
+ const struct sdramc_reg *p);
#endif
/* SDRAM Controller (SDRAMC) registers */
#define AT91_SDRAMC_DBW_32 (0 << 7)
#define AT91_SDRAMC_DBW_16 (1 << 7)
#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TWR_VAL(x) (x << 8)
#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRC_VAL(x) (x << 12)
#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRP_VAL(x) (x << 16)
#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRCD_VAL(x) (x << 20)
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TRAS_VAL(x) (x << 24)
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+#define AT91_SDRAMC_TXSR_VAL(x) (x << 28)
#define AT91_SDRAMC_LPR (ATMEL_BASE_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
#endif
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
#ifndef __AT91SAM9X5_H__
#define __AT91SAM9X5_H__
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 family */
/*
#define ATMEL_MPDDRC_CR_DIC_DS (0x1 << 8)
#define ATMEL_MPDDRC_CR_DIS_DLL (0x1 << 9)
#define ATMEL_MPDDRC_CR_OCD_DEFAULT (0x7 << 12)
+#define ATMEL_MPDDRC_CR_DQMS_SHARED (0x1 << 16)
#define ATMEL_MPDDRC_CR_ENRDM_ON (0x1 << 17)
#define ATMEL_MPDDRC_CR_NB_8BANKS (0x1 << 20)
#define ATMEL_MPDDRC_CR_NDQS_DISABLED (0x1 << 21)
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ATMEL_SERIAL_H
+#define _ATMEL_SERIAL_H
+
+/* Information about a serial port */
+struct atmel_serial_platdata {
+ uint32_t base_addr;
+};
+
+#endif
#define __ASM_ARM_ARCH_CLK_H__
#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
#include <asm/global_data.h>
static inline unsigned long get_cpu_clk_rate(void)
return gd->arch.at91_pllb_usb_init;
}
+#ifdef CPU_HAS_H32MXDIV
+static inline unsigned int get_h32mxdiv(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ return readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV;
+}
+#else
+static inline unsigned int get_h32mxdiv(void)
+{
+ return 0;
+}
+#endif
+
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
- return get_mck_clk_rate();
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
}
static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
{
- return get_mck_clk_rate();
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
}
static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
{
- return get_mck_clk_rate();
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
}
static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
{
- return get_mck_clk_rate();
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
}
static inline unsigned long get_mci_clk_rate(void)
{
- return get_mck_clk_rate();
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
+}
+
+static inline unsigned long get_pit_clk_rate(void)
+{
+ if (get_h32mxdiv())
+ return get_mck_clk_rate() / 2;
+ else
+ return get_mck_clk_rate();
}
int at91_clock_init(unsigned long main_clock);
return gpio % 32;
}
+/* Platform data for each GPIO port */
+struct at91_port_platdata {
+ uint32_t base_addr;
+ const char *bank_name;
+};
+
#endif /* __ASM_ARCH_AT91_GPIO_H */
# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
+#elif defined(CONFIG_SAMA5D4)
+# include <asm/arch/sama5d4.h>
#else
# error "Unsupported AT91 processor"
#endif
/*
* defines to be used in other places
*/
-#define CONFIG_ARMV7 /* ARM A5 Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
--- /dev/null
+/*
+ * Chip-specific header file for the SAMA5D4 SoC
+ *
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SAMA5D4_H
+#define __SAMA5D4_H
+
+/*
+ * defines to be used in other places
+ */
+#define CONFIG_AT91FAMILY /* It's a member of AT91 */
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ 0 /* FIQ Interrupt */
+#define ATMEL_ID_SYS 1 /* System Controller */
+#define ATMEL_ID_ARM 2 /* Performance Monitor Unit */
+#define ATMEL_ID_PIT 3 /* Periodic Interval Timer */
+#define ATMEL_ID_WDT 4 /* Watchdog timer */
+#define ATMEL_ID_PIOD 5 /* Parallel I/O Controller D */
+#define ATMEL_ID_USART0 6 /* USART 0 */
+#define ATMEL_ID_USART1 7 /* USART 1 */
+#define ATMEL_ID_DMA0 8 /* DMA Controller 0 */
+#define ATMEL_ID_ICM 9 /* Integrity Check Monitor */
+#define ATMEL_ID_PKCC 10 /* Public Key Crypto Controller */
+#define ATMEL_ID_AES 12 /* Advanced Encryption Standard */
+#define ATMEL_ID_AESB 13 /* AES Bridge*/
+#define ATMEL_ID_TDES 14 /* Triple Data Encryption Standard */
+#define ATMEL_ID_SHA 15 /* SHA Signature */
+#define ATMEL_ID_MPDDRC 16 /* MPDDR controller */
+#define ATMEL_ID_MATRIX1 17 /* H32MX, 32-bit AHB Matrix */
+#define ATMEL_ID_MATRIX0 18 /* H64MX, 64-bit AHB Matrix */
+#define ATMEL_ID_VDEC 19 /* Video Decoder */
+#define ATMEL_ID_SBM 20 /* Secure Box Module */
+#define ATMEL_ID_SMC 22 /* Multi-bit ECC interrupt */
+#define ATMEL_ID_PIOA 23 /* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB 24 /* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC 25 /* Parallel I/O Controller C */
+#define ATMEL_ID_PIOE 26 /* Parallel I/O Controller E */
+#define ATMEL_ID_UART0 27 /* UART 0 */
+#define ATMEL_ID_UART1 28 /* UART 1 */
+#define ATMEL_ID_USART2 29 /* USART 2 */
+#define ATMEL_ID_USART3 30 /* USART 3 */
+#define ATMEL_ID_USART4 31 /* USART 4 */
+#define ATMEL_ID_TWI0 32 /* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1 33 /* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2 34 /* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0 35 /* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1 36 /* High Speed Multimedia Card Interface 1 */
+#define ATMEL_ID_SPI0 37 /* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1 38 /* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SPI2 39 /* Serial Peripheral Interface 2 */
+#define ATMEL_ID_TC0 40 /* Timer Counter 0 (ch. 0, 1, 2) */
+#define ATMEL_ID_TC1 41 /* Timer Counter 1 (ch. 3, 4, 5) */
+#define ATMEL_ID_TC2 42 /* Timer Counter 2 (ch. 6, 7, 8) */
+#define ATMEL_ID_PWMC 43 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_ADC 44 /* Touch Screen ADC Controller */
+#define ATMEL_ID_DBGU 45 /* Debug Unit Interrupt */
+#define ATMEL_ID_UHPHS 46 /* USB Host High Speed */
+#define ATMEL_ID_UDPHS 47 /* USB Device High Speed */
+#define ATMEL_ID_SSC0 48 /* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1 49 /* Synchronous Serial Controller 1 */
+#define ATMEL_ID_XDMAC1 50 /* DMA Controller 1 */
+#define ATMEL_ID_LCDC 51 /* LCD Controller */
+#define ATMEL_ID_ISI 52 /* Image Sensor Interface */
+#define ATMEL_ID_TRNG 53 /* True Random Number Generator */
+#define ATMEL_ID_GMAC0 54 /* Ethernet MAC 0 */
+#define ATMEL_ID_GMAC1 55 /* Ethernet MAC 1 */
+#define ATMEL_ID_IRQ 56 /* IRQ Interrupt ID */
+#define ATMEL_ID_SFC 57 /* Fuse Controller */
+#define ATMEL_ID_SECURAM 59 /* Secured RAM */
+#define ATMEL_ID_SMD 61 /* SMD Soft Modem */
+#define ATMEL_ID_TWI3 62 /* Two-Wire Interface 3 */
+#define ATMEL_ID_CATB 63 /* Capacitive Touch Controller */
+#define ATMEL_ID_SFR 64 /* Special Funcion Register */
+#define ATMEL_ID_AIC 65 /* Advanced Interrupt Controller */
+#define ATMEL_ID_SAIC 66 /* Secured Advanced Interrupt Controller */
+#define ATMEL_ID_L2CC 67 /* L2 Cache Controller */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_LCDC 0xf0000000
+#define ATMEL_BASE_DMAC1 0xf0004000
+#define ATMEL_BASE_ISI 0xf0008000
+#define ATMEL_BASE_PKCC 0xf000C000
+#define ATMEL_BASE_MPDDRC 0xf0010000
+#define ATMEL_BASE_DMAC0 0xf0014000
+#define ATMEL_BASE_PMC 0xf0018000
+#define ATMEL_BASE_MATRIX0 0xf001c000
+#define ATMEL_BASE_AESB 0xf0020000
+/* Reserved: 0xf0024000 - 0xf8000000 */
+#define ATMEL_BASE_MCI0 0xf8000000
+#define ATMEL_BASE_UART0 0xf8004000
+#define ATMEL_BASE_SSC0 0xf8008000
+#define ATMEL_BASE_PWMC 0xf800c000
+#define ATMEL_BASE_SPI0 0xf8010000
+#define ATMEL_BASE_TWI0 0xf8014000
+#define ATMEL_BASE_TWI1 0xf8018000
+#define ATMEL_BASE_TC0 0xf801c000
+#define ATMEL_BASE_GMAC0 0xf8020000
+#define ATMEL_BASE_TWI2 0xf8024000
+#define ATMEL_BASE_SFR 0xf8028000
+#define ATMEL_BASE_USART0 0xf802c000
+#define ATMEL_BASE_USART1 0xf8030000
+/* Reserved: 0xf8034000 - 0xfc000000 */
+#define ATMEL_BASE_MCI1 0xfc000000
+#define ATMEL_BASE_UART1 0xfc004000
+#define ATMEL_BASE_USART2 0xfc008000
+#define ATMEL_BASE_USART3 0xfc00c000
+#define ATMEL_BASE_USART4 0xfc010000
+#define ATMEL_BASE_SSC1 0xfc014000
+#define ATMEL_BASE_SPI1 0xfc018000
+#define ATMEL_BASE_SPI2 0xfc01c000
+#define ATMEL_BASE_TC1 0xfc020000
+#define ATMEL_BASE_TC2 0xfc024000
+#define ATMEL_BASE_GMAC1 0xfc028000
+#define ATMEL_BASE_UDPHS 0xfc02c000
+#define ATMEL_BASE_TRNG 0xfc030000
+#define ATMEL_BASE_ADC 0xfc034000
+#define ATMEL_BASE_TWI3 0xfc038000
+
+#define ATMEL_BASE_SMC 0xfc05c000
+#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500)
+
+#define ATMEL_BASE_PIOD 0xfc068000
+#define ATMEL_BASE_RSTC 0xfc068600
+#define ATMEL_BASE_PIT 0xfc068630
+#define ATMEL_BASE_WDT 0xfc068640
+
+#define ATMEL_BASE_DBGU 0xfc069000
+#define ATMEL_BASE_PIOA 0xfc06a000
+#define ATMEL_BASE_PIOB 0xfc06b000
+#define ATMEL_BASE_PIOC 0xfc06c000
+#define ATMEL_BASE_PIOE 0xfc06d000
+#define ATMEL_BASE_AIC 0xfc06e000
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM 0x00000000 /* Internal ROM base address */
+#define ATMEL_BASE_NFC 0x00100000 /* NFC SRAM */
+#define ATMEL_BASE_SRAM 0x00200000 /* Internal ROM base address */
+#define ATMEL_BASE_VDEC 0x00300000 /* Video Decoder Controller */
+#define ATMEL_BASE_UDPHS_FIFO 0x00400000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI 0x00500000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI 0x00600000 /* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI 0x00700000
+#define ATMEL_BASE_DAP 0x00800000
+#define ATMEL_BASE_SMD 0x00900000
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_DDRCS 0x20000000
+#define ATMEL_BASE_CS1 0x60000000
+#define ATMEL_BASE_CS2 0x70000000
+#define ATMEL_BASE_CS3 0x80000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS 5
+#define CPU_HAS_PIO3
+#define PIO_SCDR_DIV 0x3fff
+#define CPU_HAS_PCR
+#define CPU_HAS_H32MXDIV
+
+/* sama5d4 series chip id definitions */
+#define ARCH_ID_SAMA5D4 0x8a5c07c0
+#define ARCH_EXID_SAMA5D41 0x00000001
+#define ARCH_EXID_SAMA5D42 0x00000002
+#define ARCH_EXID_SAMA5D43 0x00000003
+#define ARCH_EXID_SAMA5D44 0x00000004
+
+#define cpu_is_sama5d4() (get_chip_id() == ARCH_ID_SAMA5D4)
+#define cpu_is_sama5d41() (cpu_is_sama5d4() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D41))
+#define cpu_is_sama5d42() (cpu_is_sama5d4() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D42))
+#define cpu_is_sama5d43() (cpu_is_sama5d4() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D43))
+#define cpu_is_sama5d44() (cpu_is_sama5d4() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D44))
+
+/*
+ * No PMECC Galois table in ROM
+ */
+#define NO_GALOIS_TABLE_IN_ROM
+
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
#define MXC_CPU_MX6Q 0x63
#define MXC_CPU_MX6D 0x64
#define MXC_CPU_MX6SOLO 0x65 /* dummy ID */
+
+#define CS0_128 0
+#define CS0_64M_CS1_64M 1
+#define CS0_64M_CS1_32M_CS2_32M 2
+#define CS0_32M_CS1_32M_CS2_32M_CS3_32M 3
#endif /* CONFIG_KW88F6281 */
#include <asm/arch/soc.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
#define CONFIG_SYS_CACHELINE_SIZE 32
/* default Dcache Line length for kirkwood */
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
#define _LPC32XX_CONFIG_H
/* Basic CPU architecture */
-#define CONFIG_ARM926EJS
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
*/
#define WBED 1
-#define CS0_128 0
-#define CS0_64M_CS1_64M 1
-#define CS0_64M_CS1_32M_CS2_32M 2
-#define CS0_32M_CS1_32M_CS2_32M_CS3_32M 3
-
/*
* CSPI register definitions
*/
#if defined(CONFIG_MX51)
struct iomuxc {
- u32 gpr0;
- u32 gpr1;
+ u32 gpr[2];
u32 omux0;
u32 omux1;
u32 omux2;
};
#elif defined(CONFIG_MX53)
struct iomuxc {
- u32 gpr0;
- u32 gpr1;
- u32 gpr2;
+ u32 gpr[3];
u32 omux0;
u32 omux1;
u32 omux2;
int enable_cspi_clock(unsigned char enable, unsigned spi_num);
int enable_usdhc_clk(unsigned char enable, unsigned bus_num);
int enable_sata_clock(void);
+void disable_sata_clock(void);
int enable_pcie_clock(void);
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
int enable_spi_clk(unsigned char enable, unsigned spi_num);
void enable_ipu_clock(void);
int enable_fec_anatop_clock(enum enet_freq freq);
void enable_enet_clk(unsigned char enable);
+void enable_thermal_clk(void);
#endif /* __ASM_ARCH_CLOCK_H */
#define SRC_SCR_CORE_3_ENABLE_OFFSET 24
#define SRC_SCR_CORE_3_ENABLE_MASK (1<<SRC_SCR_CORE_3_ENABLE_OFFSET)
+/* WEIM registers */
+struct weim {
+ u32 cs0gcr1;
+ u32 cs0gcr2;
+ u32 cs0rcr1;
+ u32 cs0rcr2;
+ u32 cs0wcr1;
+ u32 cs0wcr2;
+
+ u32 cs1gcr1;
+ u32 cs1gcr2;
+ u32 cs1rcr1;
+ u32 cs1rcr2;
+ u32 cs1wcr1;
+ u32 cs1wcr2;
+
+ u32 cs2gcr1;
+ u32 cs2gcr2;
+ u32 cs2rcr1;
+ u32 cs2rcr2;
+ u32 cs2wcr1;
+ u32 cs2wcr2;
+
+ u32 cs3gcr1;
+ u32 cs3gcr2;
+ u32 cs3rcr1;
+ u32 cs3rcr2;
+ u32 cs3wcr1;
+ u32 cs3wcr2;
+
+ u32 unused[12];
+
+ u32 wcr;
+ u32 wiar;
+ u32 ear;
+};
+
/* System Reset Controller (SRC) */
struct src {
u32 scr;
const char *get_imx_type(u32 imxtype);
unsigned imx_ddr_size(void);
+void set_chipselect_size(int const);
/*
* Initializes on-chip ethernet controllers.
#include <asm/arch/pantheon.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
/* default Dcache Line length for pantheon */
#define CONFIG_SYS_CACHELINE_SIZE 32
#elif defined(CONFIG_R8A7791)
#include "r8a7791-gpio.h"
void r8a7791_pinmux_init(void);
+#elif defined(CONFIG_R8A7793)
+#include "r8a7793-gpio.h"
+void r8a7793_pinmux_init(void);
#elif defined(CONFIG_R8A7794)
#include "r8a7794-gpio.h"
void r8a7794_pinmux_init(void);
#include "rcar-base.h"
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2 0xE6520000
+#define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000
+
#define R8A7790_CUT_ES2X 2
#define IS_R8A7790_ES2() \
(rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
/*
* R-Car (R8A7791) I/O Addresses
*/
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+
#define DBSC3_1_QOS_R0_BASE 0xE67A1000
#define DBSC3_1_QOS_R1_BASE 0xE67A1100
#define DBSC3_1_QOS_R2_BASE 0xE67A1200
--- /dev/null
+#ifndef __ASM_R8A7793_H__
+#define __ASM_R8A7793_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+ GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+ GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+ GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+ GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+ GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+ GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+ GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+ GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+ GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+ GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+ GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+ GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+ GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+ GPIO_GP_1_24, GPIO_GP_1_25,
+
+ GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+ GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+ GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+ GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+ GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+ GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+ GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+ GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
+
+ GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+ GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+ GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+ GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+ GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+ GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+ GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+ GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+ GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+ GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+ GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+ GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+ GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+ GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+ GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+ GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+ GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+ GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+ GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+ GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
+ GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
+ GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
+ GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
+ GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
+
+ GPIO_GP_6_0, GPIO_GP_6_1, GPIO_GP_6_2, GPIO_GP_6_3,
+ GPIO_GP_6_4, GPIO_GP_6_5, GPIO_GP_6_6, GPIO_GP_6_7,
+ GPIO_GP_6_8, GPIO_GP_6_9, GPIO_GP_6_10, GPIO_GP_6_11,
+ GPIO_GP_6_12, GPIO_GP_6_13, GPIO_GP_6_14, GPIO_GP_6_15,
+ GPIO_GP_6_16, GPIO_GP_6_17, GPIO_GP_6_18, GPIO_GP_6_19,
+ GPIO_GP_6_20, GPIO_GP_6_21, GPIO_GP_6_22, GPIO_GP_6_23,
+ GPIO_GP_6_24, GPIO_GP_6_25, GPIO_GP_6_26, GPIO_GP_6_27,
+ GPIO_GP_6_28, GPIO_GP_6_29, GPIO_GP_6_30, GPIO_GP_6_31,
+
+ GPIO_GP_7_0, GPIO_GP_7_1, GPIO_GP_7_2, GPIO_GP_7_3,
+ GPIO_GP_7_4, GPIO_GP_7_5, GPIO_GP_7_6, GPIO_GP_7_7,
+ GPIO_GP_7_8, GPIO_GP_7_9, GPIO_GP_7_10, GPIO_GP_7_11,
+ GPIO_GP_7_12, GPIO_GP_7_13, GPIO_GP_7_14, GPIO_GP_7_15,
+ GPIO_GP_7_16, GPIO_GP_7_17, GPIO_GP_7_18, GPIO_GP_7_19,
+ GPIO_GP_7_20, GPIO_GP_7_21, GPIO_GP_7_22, GPIO_GP_7_23,
+ GPIO_GP_7_24, GPIO_GP_7_25,
+
+ GPIO_FN_EX_CS0_N, GPIO_FN_RD_N, GPIO_FN_AUDIO_CLKA,
+ GPIO_FN_VI0_CLK, GPIO_FN_VI0_DATA0_VI0_B0,
+ GPIO_FN_VI0_DATA0_VI0_B1, GPIO_FN_VI0_DATA0_VI0_B2,
+ GPIO_FN_VI0_DATA0_VI0_B4, GPIO_FN_VI0_DATA0_VI0_B5,
+ GPIO_FN_VI0_DATA0_VI0_B6, GPIO_FN_VI0_DATA0_VI0_B7,
+ GPIO_FN_USB0_PWEN, GPIO_FN_USB0_OVC, GPIO_FN_USB1_PWEN,
+
+ /* IPSR0 */
+ GPIO_FN_D0, GPIO_FN_D1, GPIO_FN_D2, GPIO_FN_D3, GPIO_FN_D4, GPIO_FN_D5,
+ GPIO_FN_D6, GPIO_FN_D7, GPIO_FN_D8, GPIO_FN_D9, GPIO_FN_D10,
+ GPIO_FN_D11, GPIO_FN_D12, GPIO_FN_D13, GPIO_FN_D14, GPIO_FN_D15,
+ GPIO_FN_A0, GPIO_FN_ATAWR0_N_C, GPIO_FN_MSIOF0_SCK_B,
+ GPIO_FN_SCL0_C, GPIO_FN_PWM2_B,
+ GPIO_FN_A1, GPIO_FN_MSIOF0_SYNC_B, GPIO_FN_A2, GPIO_FN_MSIOF0_SS1_B,
+ GPIO_FN_A3, GPIO_FN_MSIOF0_SS2_B, GPIO_FN_A4, GPIO_FN_MSIOF0_TXD_B,
+ GPIO_FN_A5, GPIO_FN_MSIOF0_RXD_B, GPIO_FN_A6, GPIO_FN_MSIOF1_SCK,
+
+ /* IPSR1 */
+ GPIO_FN_A7, GPIO_FN_MSIOF1_SYNC, GPIO_FN_A8,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_SCL0,
+ GPIO_FN_A9, GPIO_FN_MSIOF1_SS2, GPIO_FN_SDA0,
+ GPIO_FN_A10, GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_TXD_D,
+ GPIO_FN_A11, GPIO_FN_MSIOF1_RXD, GPIO_FN_SCL3_D, GPIO_FN_MSIOF1_RXD_D,
+ GPIO_FN_A12, GPIO_FN_FMCLK, GPIO_FN_SDA3_D, GPIO_FN_MSIOF1_SCK_D,
+ GPIO_FN_A13, GPIO_FN_ATAG0_N_C, GPIO_FN_BPFCLK, GPIO_FN_MSIOF1_SS1_D,
+ GPIO_FN_A14, GPIO_FN_ATADIR0_N_C, GPIO_FN_FMIN,
+ GPIO_FN_FMIN_C, GPIO_FN_MSIOF1_SYNC_D,
+ GPIO_FN_A15, GPIO_FN_BPFCLK_C,
+ GPIO_FN_A16, GPIO_FN_DREQ2_B, GPIO_FN_FMCLK_C, GPIO_FN_SCIFA1_SCK_B,
+ GPIO_FN_A17, GPIO_FN_DACK2_B, GPIO_FN_SDA0_C,
+ GPIO_FN_A18, GPIO_FN_DREQ1, GPIO_FN_SCIFA1_RXD_C, GPIO_FN_SCIFB1_RXD_C,
+
+ /* IPSR2 */
+ GPIO_FN_A19, GPIO_FN_DACK1, GPIO_FN_SCIFA1_TXD_C,
+ GPIO_FN_SCIFB1_TXD_C, GPIO_FN_SCIFB1_SCK_B,
+ GPIO_FN_A20, GPIO_FN_SPCLK,
+ GPIO_FN_A21, GPIO_FN_ATAWR0_N_B, GPIO_FN_MOSI_IO0,
+ GPIO_FN_A22, GPIO_FN_MISO_IO1, GPIO_FN_FMCLK_B,
+ GPIO_FN_TX0, GPIO_FN_SCIFA0_TXD,
+ GPIO_FN_A23, GPIO_FN_IO2, GPIO_FN_BPFCLK_B,
+ GPIO_FN_RX0, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_A24, GPIO_FN_DREQ2, GPIO_FN_IO3,
+ GPIO_FN_TX1, GPIO_FN_SCIFA1_TXD,
+ GPIO_FN_A25, GPIO_FN_DACK2, GPIO_FN_SSL, GPIO_FN_DREQ1_C,
+ GPIO_FN_RX1, GPIO_FN_SCIFA1_RXD,
+ GPIO_FN_CS0_N, GPIO_FN_ATAG0_N_B, GPIO_FN_SCL1,
+ GPIO_FN_CS1_N_A26, GPIO_FN_ATADIR0_N_B, GPIO_FN_SDA1,
+ GPIO_FN_EX_CS1_N, GPIO_FN_MSIOF2_SCK,
+ GPIO_FN_EX_CS2_N, GPIO_FN_ATAWR0_N, GPIO_FN_MSIOF2_SYNC,
+ GPIO_FN_EX_CS3_N, GPIO_FN_ATADIR0_N, GPIO_FN_MSIOF2_TXD,
+ GPIO_FN_ATAG0_N, GPIO_FN_EX_WAIT1,
+
+ /* IPSR3 */
+ GPIO_FN_EX_CS4_N, GPIO_FN_ATARD0_N,
+ GPIO_FN_MSIOF2_RXD, GPIO_FN_EX_WAIT2,
+ GPIO_FN_EX_CS5_N, GPIO_FN_ATACS00_N, GPIO_FN_MSIOF2_SS1,
+ GPIO_FN_HRX1_B, GPIO_FN_SCIFB1_RXD_B,
+ GPIO_FN_PWM1, GPIO_FN_TPU_TO1,
+ GPIO_FN_BS_N, GPIO_FN_ATACS10_N, GPIO_FN_MSIOF2_SS2,
+ GPIO_FN_HTX1_B, GPIO_FN_SCIFB1_TXD_B,
+ GPIO_FN_PWM2, GPIO_FN_TPU_TO2,
+ GPIO_FN_RD_WR_N, GPIO_FN_HRX2_B, GPIO_FN_FMIN_B,
+ GPIO_FN_SCIFB0_RXD_B, GPIO_FN_DREQ1_D,
+ GPIO_FN_WE0_N, GPIO_FN_HCTS2_N_B, GPIO_FN_SCIFB0_TXD_B,
+ GPIO_FN_WE1_N, GPIO_FN_ATARD0_N_B,
+ GPIO_FN_HTX2_B, GPIO_FN_SCIFB0_RTS_N_B,
+ GPIO_FN_EX_WAIT0, GPIO_FN_HRTS2_N_B, GPIO_FN_SCIFB0_CTS_N_B,
+ GPIO_FN_DREQ0, GPIO_FN_PWM3, GPIO_FN_TPU_TO3,
+ GPIO_FN_DACK0, GPIO_FN_DRACK0, GPIO_FN_REMOCON,
+ GPIO_FN_SPEEDIN, GPIO_FN_HSCK0_C, GPIO_FN_HSCK2_C,
+ GPIO_FN_SCIFB0_SCK_B, GPIO_FN_SCIFB2_SCK_B,
+ GPIO_FN_DREQ2_C, GPIO_FN_HTX2_D,
+ GPIO_FN_SSI_SCK0129, GPIO_FN_HRX0_C, GPIO_FN_HRX2_C,
+ GPIO_FN_SCIFB0_RXD_C, GPIO_FN_SCIFB2_RXD_C,
+ GPIO_FN_SSI_WS0129, GPIO_FN_HTX0_C, GPIO_FN_HTX2_C,
+ GPIO_FN_SCIFB0_TXD_C, GPIO_FN_SCIFB2_TXD_C,
+
+ /* IPSR4 */
+ GPIO_FN_SSI_SDATA0, GPIO_FN_SCL0_B,
+ GPIO_FN_SCL7_B, GPIO_FN_MSIOF2_SCK_C,
+ GPIO_FN_SSI_SCK1, GPIO_FN_SDA0_B, GPIO_FN_SDA7_B,
+ GPIO_FN_MSIOF2_SYNC_C, GPIO_FN_GLO_I0_D,
+ GPIO_FN_SSI_WS1, GPIO_FN_SCL1_B, GPIO_FN_SCL8_B,
+ GPIO_FN_MSIOF2_TXD_C, GPIO_FN_GLO_I1_D,
+ GPIO_FN_SSI_SDATA1, GPIO_FN_SDA1_B,
+ GPIO_FN_SDA8_B, GPIO_FN_MSIOF2_RXD_C,
+ GPIO_FN_SSI_SCK2, GPIO_FN_SCL2, GPIO_FN_GPS_CLK_B,
+ GPIO_FN_GLO_Q0_D, GPIO_FN_HSCK1_E,
+ GPIO_FN_SSI_WS2, GPIO_FN_SDA2, GPIO_FN_GPS_SIGN_B,
+ GPIO_FN_RX2_E, GPIO_FN_GLO_Q1_D, GPIO_FN_HCTS1_N_E,
+ GPIO_FN_SSI_SDATA2, GPIO_FN_GPS_MAG_B,
+ GPIO_FN_TX2_E, GPIO_FN_HRTS1_N_E,
+ GPIO_FN_SSI_SCK34, GPIO_FN_SSI_WS34, GPIO_FN_SSI_SDATA3,
+ GPIO_FN_SSI_SCK4, GPIO_FN_GLO_SS_D,
+ GPIO_FN_SSI_WS4, GPIO_FN_GLO_RFON_D,
+ GPIO_FN_SSI_SDATA4, GPIO_FN_MSIOF2_SCK_D,
+ GPIO_FN_SSI_SCK5, GPIO_FN_MSIOF1_SCK_C,
+ GPIO_FN_TS_SDATA0, GPIO_FN_GLO_I0,
+ GPIO_FN_MSIOF2_SYNC_D, GPIO_FN_VI1_R2_B,
+
+ /* IPSR5 */
+ GPIO_FN_SSI_WS5, GPIO_FN_MSIOF1_SYNC_C, GPIO_FN_TS_SCK0,
+ GPIO_FN_GLO_I1, GPIO_FN_MSIOF2_TXD_D, GPIO_FN_VI1_R3_B,
+ GPIO_FN_SSI_SDATA5, GPIO_FN_MSIOF1_TXD_C, GPIO_FN_TS_SDEN0,
+ GPIO_FN_GLO_Q0, GPIO_FN_MSIOF2_SS1_D, GPIO_FN_VI1_R4_B,
+ GPIO_FN_SSI_SCK6, GPIO_FN_MSIOF1_RXD_C, GPIO_FN_TS_SPSYNC0,
+ GPIO_FN_GLO_Q1, GPIO_FN_MSIOF2_RXD_D, GPIO_FN_VI1_R5_B,
+ GPIO_FN_SSI_WS6, GPIO_FN_GLO_SCLK,
+ GPIO_FN_MSIOF2_SS2_D, GPIO_FN_VI1_R6_B,
+ GPIO_FN_SSI_SDATA6, GPIO_FN_STP_IVCXO27_0_B,
+ GPIO_FN_GLO_SDATA, GPIO_FN_VI1_R7_B,
+ GPIO_FN_SSI_SCK78, GPIO_FN_STP_ISCLK_0_B, GPIO_FN_GLO_SS,
+ GPIO_FN_SSI_WS78, GPIO_FN_TX0_D, GPIO_FN_STP_ISD_0_B, GPIO_FN_GLO_RFON,
+ GPIO_FN_SSI_SDATA7, GPIO_FN_RX0_D, GPIO_FN_STP_ISEN_0_B,
+ GPIO_FN_SSI_SDATA8, GPIO_FN_TX1_D, GPIO_FN_STP_ISSYNC_0_B,
+ GPIO_FN_SSI_SCK9, GPIO_FN_RX1_D, GPIO_FN_GLO_SCLK_D,
+ GPIO_FN_SSI_WS9, GPIO_FN_TX3_D, GPIO_FN_CAN0_TX_D, GPIO_FN_GLO_SDATA_D,
+ GPIO_FN_SSI_SDATA9, GPIO_FN_RX3_D, GPIO_FN_CAN0_RX_D,
+
+ /* IPSR6 */
+ GPIO_FN_AUDIO_CLKB, GPIO_FN_STP_OPWM_0_B, GPIO_FN_MSIOF1_SCK_B,
+ GPIO_FN_SCIF_CLK, GPIO_FN_BPFCLK_E,
+ GPIO_FN_AUDIO_CLKC, GPIO_FN_SCIFB0_SCK_C, GPIO_FN_MSIOF1_SYNC_B,
+ GPIO_FN_RX2, GPIO_FN_SCIFA2_RXD, GPIO_FN_FMIN_E,
+ GPIO_FN_AUDIO_CLKOUT, GPIO_FN_MSIOF1_SS1_B,
+ GPIO_FN_TX2, GPIO_FN_SCIFA2_TXD,
+ GPIO_FN_IRQ0, GPIO_FN_SCIFB1_RXD_D, GPIO_FN_INTC_IRQ0_N,
+ GPIO_FN_IRQ1, GPIO_FN_SCIFB1_SCK_C, GPIO_FN_INTC_IRQ1_N,
+ GPIO_FN_IRQ2, GPIO_FN_SCIFB1_TXD_D, GPIO_FN_INTC_IRQ2_N,
+ GPIO_FN_IRQ3, GPIO_FN_SCL4_C,
+ GPIO_FN_MSIOF2_TXD_E, GPIO_FN_INTC_IRQ3_N,
+ GPIO_FN_IRQ4, GPIO_FN_HRX1_C, GPIO_FN_SDA4_C,
+ GPIO_FN_MSIOF2_RXD_E, GPIO_FN_INTC_IRQ4_N,
+ GPIO_FN_IRQ5, GPIO_FN_HTX1_C, GPIO_FN_SCL1_E, GPIO_FN_MSIOF2_SCK_E,
+ GPIO_FN_IRQ6, GPIO_FN_HSCK1_C, GPIO_FN_MSIOF1_SS2_B,
+ GPIO_FN_SDA1_E, GPIO_FN_MSIOF2_SYNC_E,
+ GPIO_FN_IRQ7, GPIO_FN_HCTS1_N_C, GPIO_FN_MSIOF1_TXD_B,
+ GPIO_FN_GPS_CLK_C, GPIO_FN_GPS_CLK_D,
+ GPIO_FN_IRQ8, GPIO_FN_HRTS1_N_C, GPIO_FN_MSIOF1_RXD_B,
+ GPIO_FN_GPS_SIGN_C, GPIO_FN_GPS_SIGN_D,
+
+ /* IPSR7 */
+ GPIO_FN_IRQ9, GPIO_FN_DU1_DOTCLKIN_B, GPIO_FN_CAN_CLK_D,
+ GPIO_FN_GPS_MAG_C, GPIO_FN_SCIF_CLK_B, GPIO_FN_GPS_MAG_D,
+ GPIO_FN_DU1_DR0, GPIO_FN_LCDOUT0, GPIO_FN_VI1_DATA0_B, GPIO_FN_TX0_B,
+ GPIO_FN_SCIFA0_TXD_B, GPIO_FN_MSIOF2_SCK_B,
+ GPIO_FN_DU1_DR1, GPIO_FN_LCDOUT1, GPIO_FN_VI1_DATA1_B, GPIO_FN_RX0_B,
+ GPIO_FN_SCIFA0_RXD_B, GPIO_FN_MSIOF2_SYNC_B,
+ GPIO_FN_DU1_DR2, GPIO_FN_LCDOUT2, GPIO_FN_SSI_SCK0129_B,
+ GPIO_FN_DU1_DR3, GPIO_FN_LCDOUT3, GPIO_FN_SSI_WS0129_B,
+ GPIO_FN_DU1_DR4, GPIO_FN_LCDOUT4, GPIO_FN_SSI_SDATA0_B,
+ GPIO_FN_DU1_DR5, GPIO_FN_LCDOUT5, GPIO_FN_SSI_SCK1_B,
+ GPIO_FN_DU1_DR6, GPIO_FN_LCDOUT6, GPIO_FN_SSI_WS1_B,
+ GPIO_FN_DU1_DR7, GPIO_FN_LCDOUT7, GPIO_FN_SSI_SDATA1_B,
+ GPIO_FN_DU1_DG0, GPIO_FN_LCDOUT8, GPIO_FN_VI1_DATA2_B, GPIO_FN_TX1_B,
+ GPIO_FN_SCIFA1_TXD_B, GPIO_FN_MSIOF2_SS1_B,
+ GPIO_FN_DU1_DG1, GPIO_FN_LCDOUT9, GPIO_FN_VI1_DATA3_B, GPIO_FN_RX1_B,
+ GPIO_FN_SCIFA1_RXD_B, GPIO_FN_MSIOF2_SS2_B,
+ GPIO_FN_DU1_DG2, GPIO_FN_LCDOUT10, GPIO_FN_VI1_DATA4_B,
+ GPIO_FN_SCIF1_SCK_B, GPIO_FN_SCIFA1_SCK, GPIO_FN_SSI_SCK78_B,
+
+ /* IPSR8 */
+ GPIO_FN_DU1_DG3, GPIO_FN_LCDOUT11,
+ GPIO_FN_VI1_DATA5_B, GPIO_FN_SSI_WS78_B,
+ GPIO_FN_DU1_DG4, GPIO_FN_LCDOUT12, GPIO_FN_VI1_DATA6_B,
+ GPIO_FN_HRX0_B, GPIO_FN_SCIFB2_RXD_B, GPIO_FN_SSI_SDATA7_B,
+ GPIO_FN_DU1_DG5, GPIO_FN_LCDOUT13, GPIO_FN_VI1_DATA7_B,
+ GPIO_FN_HCTS0_N_B, GPIO_FN_SCIFB2_TXD_B, GPIO_FN_SSI_SDATA8_B,
+ GPIO_FN_DU1_DG6, GPIO_FN_LCDOUT14, GPIO_FN_HRTS0_N_B,
+ GPIO_FN_SCIFB2_CTS_N_B, GPIO_FN_SSI_SCK9_B,
+ GPIO_FN_DU1_DG7, GPIO_FN_LCDOUT15, GPIO_FN_HTX0_B,
+ GPIO_FN_SCIFB2_RTS_N_B, GPIO_FN_SSI_WS9_B,
+ GPIO_FN_DU1_DB0, GPIO_FN_LCDOUT16, GPIO_FN_VI1_CLK_B, GPIO_FN_TX2_B,
+ GPIO_FN_SCIFA2_TXD_B, GPIO_FN_MSIOF2_TXD_B,
+ GPIO_FN_DU1_DB1, GPIO_FN_LCDOUT17, GPIO_FN_VI1_HSYNC_N_B,
+ GPIO_FN_RX2_B, GPIO_FN_SCIFA2_RXD_B, GPIO_FN_MSIOF2_RXD_B,
+ GPIO_FN_DU1_DB2, GPIO_FN_LCDOUT18, GPIO_FN_VI1_VSYNC_N_B,
+ GPIO_FN_SCIF2_SCK_B, GPIO_FN_SCIFA2_SCK, GPIO_FN_SSI_SDATA9_B,
+ GPIO_FN_DU1_DB3, GPIO_FN_LCDOUT19, GPIO_FN_VI1_CLKENB_B,
+ GPIO_FN_DU1_DB4, GPIO_FN_LCDOUT20,
+ GPIO_FN_VI1_FIELD_B, GPIO_FN_CAN1_RX,
+ GPIO_FN_DU1_DB5, GPIO_FN_LCDOUT21, GPIO_FN_TX3,
+ GPIO_FN_SCIFA3_TXD, GPIO_FN_CAN1_TX,
+
+ /* IPSR9 */
+ GPIO_FN_DU1_DB6, GPIO_FN_LCDOUT22, GPIO_FN_SCL3_C,
+ GPIO_FN_RX3, GPIO_FN_SCIFA3_RXD,
+ GPIO_FN_DU1_DB7, GPIO_FN_LCDOUT23, GPIO_FN_SDA3_C,
+ GPIO_FN_SCIF3_SCK, GPIO_FN_SCIFA3_SCK,
+ GPIO_FN_DU1_DOTCLKIN, GPIO_FN_QSTVA_QVS,
+ GPIO_FN_DU1_DOTCLKOUT0, GPIO_FN_QCLK,
+ GPIO_FN_DU1_DOTCLKOUT1, GPIO_FN_QSTVB_QVE, GPIO_FN_CAN0_TX,
+ GPIO_FN_TX3_B, GPIO_FN_SCL2_B, GPIO_FN_PWM4,
+ GPIO_FN_DU1_EXHSYNC_DU1_HSYNC, GPIO_FN_QSTH_QHS,
+ GPIO_FN_DU1_EXVSYNC_DU1_VSYNC, GPIO_FN_QSTB_QHE,
+ GPIO_FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
+ GPIO_FN_CAN0_RX, GPIO_FN_RX3_B, GPIO_FN_SDA2_B,
+ GPIO_FN_DU1_DISP, GPIO_FN_QPOLA,
+ GPIO_FN_DU1_CDE, GPIO_FN_QPOLB, GPIO_FN_PWM4_B,
+ GPIO_FN_VI0_CLKENB, GPIO_FN_TX4,
+ GPIO_FN_SCIFA4_TXD, GPIO_FN_TS_SDATA0_D,
+ GPIO_FN_VI0_FIELD, GPIO_FN_RX4, GPIO_FN_SCIFA4_RXD, GPIO_FN_TS_SCK0_D,
+ GPIO_FN_VI0_HSYNC_N, GPIO_FN_TX5,
+ GPIO_FN_SCIFA5_TXD, GPIO_FN_TS_SDEN0_D,
+ GPIO_FN_VI0_VSYNC_N, GPIO_FN_RX5,
+ GPIO_FN_SCIFA5_RXD, GPIO_FN_TS_SPSYNC0_D,
+ GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_SCIF3_SCK_B, GPIO_FN_SCIFA3_SCK_B,
+ GPIO_FN_VI0_G0, GPIO_FN_SCL8, GPIO_FN_STP_IVCXO27_0_C, GPIO_FN_SCL4,
+ GPIO_FN_HCTS2_N, GPIO_FN_SCIFB2_CTS_N, GPIO_FN_ATAWR1_N,
+
+ /* IPSR10 */
+ GPIO_FN_VI0_G1, GPIO_FN_SDA8, GPIO_FN_STP_ISCLK_0_C, GPIO_FN_SDA4,
+ GPIO_FN_HRTS2_N, GPIO_FN_SCIFB2_RTS_N, GPIO_FN_ATADIR1_N,
+ GPIO_FN_VI0_G2, GPIO_FN_VI2_HSYNC_N, GPIO_FN_STP_ISD_0_C,
+ GPIO_FN_SCL3_B, GPIO_FN_HSCK2, GPIO_FN_SCIFB2_SCK, GPIO_FN_ATARD1_N,
+ GPIO_FN_VI0_G3, GPIO_FN_VI2_VSYNC_N, GPIO_FN_STP_ISEN_0_C,
+ GPIO_FN_SDA3_B, GPIO_FN_HRX2, GPIO_FN_SCIFB2_RXD, GPIO_FN_ATACS01_N,
+ GPIO_FN_VI0_G4, GPIO_FN_VI2_CLKENB, GPIO_FN_STP_ISSYNC_0_C,
+ GPIO_FN_HTX2, GPIO_FN_SCIFB2_TXD, GPIO_FN_SCIFB0_SCK_D,
+ GPIO_FN_VI0_G5, GPIO_FN_VI2_FIELD, GPIO_FN_STP_OPWM_0_C,
+ GPIO_FN_FMCLK_D, GPIO_FN_CAN0_TX_E,
+ GPIO_FN_HTX1_D, GPIO_FN_SCIFB0_TXD_D,
+ GPIO_FN_VI0_G6, GPIO_FN_VI2_CLK, GPIO_FN_BPFCLK_D,
+ GPIO_FN_VI0_G7, GPIO_FN_VI2_DATA0, GPIO_FN_FMIN_D,
+ GPIO_FN_VI0_R0, GPIO_FN_VI2_DATA1, GPIO_FN_GLO_I0_B,
+ GPIO_FN_TS_SDATA0_C, GPIO_FN_ATACS11_N,
+ GPIO_FN_VI0_R1, GPIO_FN_VI2_DATA2, GPIO_FN_GLO_I1_B,
+ GPIO_FN_TS_SCK0_C, GPIO_FN_ATAG1_N,
+ GPIO_FN_VI0_R2, GPIO_FN_VI2_DATA3,
+ GPIO_FN_GLO_Q0_B, GPIO_FN_TS_SDEN0_C,
+ GPIO_FN_VI0_R3, GPIO_FN_VI2_DATA4,
+ GPIO_FN_GLO_Q1_B, GPIO_FN_TS_SPSYNC0_C,
+ GPIO_FN_VI0_R4, GPIO_FN_VI2_DATA5, GPIO_FN_GLO_SCLK_B,
+ GPIO_FN_TX0_C, GPIO_FN_SCL1_D,
+
+ /* IPSR11 */
+ GPIO_FN_VI0_R5, GPIO_FN_VI2_DATA6, GPIO_FN_GLO_SDATA_B,
+ GPIO_FN_RX0_C, GPIO_FN_SDA1_D,
+ GPIO_FN_VI0_R6, GPIO_FN_VI2_DATA7, GPIO_FN_GLO_SS_B,
+ GPIO_FN_TX1_C, GPIO_FN_SCL4_B,
+ GPIO_FN_VI0_R7, GPIO_FN_GLO_RFON_B, GPIO_FN_RX1_C, GPIO_FN_CAN0_RX_E,
+ GPIO_FN_SDA4_B, GPIO_FN_HRX1_D, GPIO_FN_SCIFB0_RXD_D,
+ GPIO_FN_VI1_HSYNC_N, GPIO_FN_AVB_RXD0, GPIO_FN_TS_SDATA0_B,
+ GPIO_FN_TX4_B, GPIO_FN_SCIFA4_TXD_B,
+ GPIO_FN_VI1_VSYNC_N, GPIO_FN_AVB_RXD1, GPIO_FN_TS_SCK0_B,
+ GPIO_FN_RX4_B, GPIO_FN_SCIFA4_RXD_B,
+ GPIO_FN_VI1_CLKENB, GPIO_FN_AVB_RXD2, GPIO_FN_TS_SDEN0_B,
+ GPIO_FN_VI1_FIELD, GPIO_FN_AVB_RXD3, GPIO_FN_TS_SPSYNC0_B,
+ GPIO_FN_VI1_CLK, GPIO_FN_AVB_RXD4, GPIO_FN_VI1_DATA0, GPIO_FN_AVB_RXD5,
+ GPIO_FN_VI1_DATA1, GPIO_FN_AVB_RXD6,
+ GPIO_FN_VI1_DATA2, GPIO_FN_AVB_RXD7,
+ GPIO_FN_VI1_DATA3, GPIO_FN_AVB_RX_ER,
+ GPIO_FN_VI1_DATA4, GPIO_FN_AVB_MDIO,
+ GPIO_FN_VI1_DATA5, GPIO_FN_AVB_RX_DV,
+ GPIO_FN_VI1_DATA6, GPIO_FN_AVB_MAGIC,
+ GPIO_FN_VI1_DATA7, GPIO_FN_AVB_MDC,
+ GPIO_FN_ETH_MDIO, GPIO_FN_AVB_RX_CLK, GPIO_FN_SCL2_C,
+ GPIO_FN_ETH_CRS_DV, GPIO_FN_AVB_LINK, GPIO_FN_SDA2_C,
+
+ /* IPSR12 */
+ GPIO_FN_ETH_RX_ER, GPIO_FN_AVB_CRS, GPIO_FN_SCL3, GPIO_FN_SCL7,
+ GPIO_FN_ETH_RXD0, GPIO_FN_AVB_PHY_INT, GPIO_FN_SDA3, GPIO_FN_SDA7,
+ GPIO_FN_ETH_RXD1, GPIO_FN_AVB_GTXREFCLK, GPIO_FN_CAN0_TX_C,
+ GPIO_FN_SCL2_D, GPIO_FN_MSIOF1_RXD_E,
+ GPIO_FN_ETH_LINK, GPIO_FN_AVB_TXD0, GPIO_FN_CAN0_RX_C,
+ GPIO_FN_SDA2_D, GPIO_FN_MSIOF1_SCK_E,
+ GPIO_FN_ETH_REFCLK, GPIO_FN_AVB_TXD1, GPIO_FN_SCIFA3_RXD_B,
+ GPIO_FN_CAN1_RX_C, GPIO_FN_MSIOF1_SYNC_E,
+ GPIO_FN_ETH_TXD1, GPIO_FN_AVB_TXD2, GPIO_FN_SCIFA3_TXD_B,
+ GPIO_FN_CAN1_TX_C, GPIO_FN_MSIOF1_TXD_E,
+ GPIO_FN_ETH_TX_EN, GPIO_FN_AVB_TXD3,
+ GPIO_FN_TCLK1_B, GPIO_FN_CAN_CLK_B,
+ GPIO_FN_ETH_MAGIC, GPIO_FN_AVB_TXD4, GPIO_FN_IETX_C,
+ GPIO_FN_ETH_TXD0, GPIO_FN_AVB_TXD5, GPIO_FN_IECLK_C,
+ GPIO_FN_ETH_MDC, GPIO_FN_AVB_TXD6, GPIO_FN_IERX_C,
+ GPIO_FN_STP_IVCXO27_0, GPIO_FN_AVB_TXD7, GPIO_FN_SCIFB2_TXD_D,
+ GPIO_FN_ADIDATA_B, GPIO_FN_MSIOF0_SYNC_C,
+ GPIO_FN_STP_ISCLK_0, GPIO_FN_AVB_TX_EN, GPIO_FN_SCIFB2_RXD_D,
+ GPIO_FN_ADICS_SAMP_B, GPIO_FN_MSIOF0_SCK_C,
+
+ /* IPSR13 */
+ GPIO_FN_STP_ISD_0, GPIO_FN_AVB_TX_ER, GPIO_FN_SCIFB2_SCK_C,
+ GPIO_FN_ADICLK_B, GPIO_FN_MSIOF0_SS1_C,
+ GPIO_FN_STP_ISEN_0, GPIO_FN_AVB_TX_CLK,
+ GPIO_FN_ADICHS0_B, GPIO_FN_MSIOF0_SS2_C,
+ GPIO_FN_STP_ISSYNC_0, GPIO_FN_AVB_COL,
+ GPIO_FN_ADICHS1_B, GPIO_FN_MSIOF0_RXD_C,
+ GPIO_FN_STP_OPWM_0, GPIO_FN_AVB_GTX_CLK, GPIO_FN_PWM0_B,
+ GPIO_FN_ADICHS2_B, GPIO_FN_MSIOF0_TXD_C,
+ GPIO_FN_SD0_CLK, GPIO_FN_SPCLK_B, GPIO_FN_SD0_CMD, GPIO_FN_MOSI_IO0_B,
+ GPIO_FN_SD0_DATA0, GPIO_FN_MISO_IO1_B,
+ GPIO_FN_SD0_DATA1, GPIO_FN_IO2_B,
+ GPIO_FN_SD0_DATA2, GPIO_FN_IO3_B, GPIO_FN_SD0_DATA3, GPIO_FN_SSL_B,
+ GPIO_FN_SD0_CD, GPIO_FN_MMC_D6_B,
+ GPIO_FN_SIM0_RST_B, GPIO_FN_CAN0_RX_F,
+ GPIO_FN_SCIFA5_TXD_B, GPIO_FN_TX3_C,
+ GPIO_FN_SD0_WP, GPIO_FN_MMC_D7_B, GPIO_FN_SIM0_D_B, GPIO_FN_CAN0_TX_F,
+ GPIO_FN_SCIFA5_RXD_B, GPIO_FN_RX3_C,
+ GPIO_FN_SD1_CMD, GPIO_FN_REMOCON_B,
+ GPIO_FN_SD1_DATA0, GPIO_FN_SPEEDIN_B,
+ GPIO_FN_SD1_DATA1, GPIO_FN_IETX_B, GPIO_FN_SD1_DATA2, GPIO_FN_IECLK_B,
+ GPIO_FN_SD1_DATA3, GPIO_FN_IERX_B,
+ GPIO_FN_SD1_CD, GPIO_FN_PWM0, GPIO_FN_TPU_TO0, GPIO_FN_SCL1_C,
+
+ /* IPSR14 */
+ GPIO_FN_SD1_WP, GPIO_FN_PWM1_B, GPIO_FN_SDA1_C,
+ GPIO_FN_SD2_CLK, GPIO_FN_MMC_CLK, GPIO_FN_SD2_CMD, GPIO_FN_MMC_CMD,
+ GPIO_FN_SD2_DATA0, GPIO_FN_MMC_D0, GPIO_FN_SD2_DATA1, GPIO_FN_MMC_D1,
+ GPIO_FN_SD2_DATA2, GPIO_FN_MMC_D2, GPIO_FN_SD2_DATA3, GPIO_FN_MMC_D3,
+ GPIO_FN_SD2_CD, GPIO_FN_MMC_D4, GPIO_FN_SCL8_C,
+ GPIO_FN_TX5_B, GPIO_FN_SCIFA5_TXD_C,
+ GPIO_FN_SD2_WP, GPIO_FN_MMC_D5, GPIO_FN_SDA8_C,
+ GPIO_FN_RX5_B, GPIO_FN_SCIFA5_RXD_C,
+ GPIO_FN_MSIOF0_SCK, GPIO_FN_RX2_C, GPIO_FN_ADIDATA,
+ GPIO_FN_VI1_CLK_C, GPIO_FN_VI1_G0_B,
+ GPIO_FN_MSIOF0_SYNC, GPIO_FN_TX2_C, GPIO_FN_ADICS_SAMP,
+ GPIO_FN_VI1_CLKENB_C, GPIO_FN_VI1_G1_B,
+ GPIO_FN_MSIOF0_TXD, GPIO_FN_ADICLK,
+ GPIO_FN_VI1_FIELD_C, GPIO_FN_VI1_G2_B,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_ADICHS0,
+ GPIO_FN_VI1_DATA0_C, GPIO_FN_VI1_G3_B,
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MMC_D6, GPIO_FN_ADICHS1, GPIO_FN_TX0_E,
+ GPIO_FN_VI1_HSYNC_N_C, GPIO_FN_SCL7_C, GPIO_FN_VI1_G4_B,
+ GPIO_FN_MSIOF0_SS2, GPIO_FN_MMC_D7, GPIO_FN_ADICHS2, GPIO_FN_RX0_E,
+ GPIO_FN_VI1_VSYNC_N_C, GPIO_FN_SDA7_C, GPIO_FN_VI1_G5_B,
+
+ /* IPSR15 */
+ GPIO_FN_SIM0_RST, GPIO_FN_IETX, GPIO_FN_CAN1_TX_D,
+ GPIO_FN_SIM0_CLK, GPIO_FN_IECLK, GPIO_FN_CAN_CLK_C,
+ GPIO_FN_SIM0_D, GPIO_FN_IERX, GPIO_FN_CAN1_RX_D,
+ GPIO_FN_GPS_CLK, GPIO_FN_DU1_DOTCLKIN_C, GPIO_FN_AUDIO_CLKB_B,
+ GPIO_FN_PWM5_B, GPIO_FN_SCIFA3_TXD_C,
+ GPIO_FN_GPS_SIGN, GPIO_FN_TX4_C, GPIO_FN_SCIFA4_TXD_C, GPIO_FN_PWM5,
+ GPIO_FN_VI1_G6_B, GPIO_FN_SCIFA3_RXD_C,
+ GPIO_FN_GPS_MAG, GPIO_FN_RX4_C, GPIO_FN_SCIFA4_RXD_C, GPIO_FN_PWM6,
+ GPIO_FN_VI1_G7_B, GPIO_FN_SCIFA3_SCK_C,
+ GPIO_FN_HCTS0_N, GPIO_FN_SCIFB0_CTS_N, GPIO_FN_GLO_I0_C,
+ GPIO_FN_TCLK1, GPIO_FN_VI1_DATA1_C,
+ GPIO_FN_HRTS0_N, GPIO_FN_SCIFB0_RTS_N,
+ GPIO_FN_GLO_I1_C, GPIO_FN_VI1_DATA2_C,
+ GPIO_FN_HSCK0, GPIO_FN_SCIFB0_SCK, GPIO_FN_GLO_Q0_C, GPIO_FN_CAN_CLK,
+ GPIO_FN_TCLK2, GPIO_FN_VI1_DATA3_C,
+ GPIO_FN_HRX0, GPIO_FN_SCIFB0_RXD, GPIO_FN_GLO_Q1_C,
+ GPIO_FN_CAN0_RX_B, GPIO_FN_VI1_DATA4_C,
+ GPIO_FN_HTX0, GPIO_FN_SCIFB0_TXD, GPIO_FN_GLO_SCLK_C,
+ GPIO_FN_CAN0_TX_B, GPIO_FN_VI1_DATA5_C,
+
+ /* IPSR16 */
+ GPIO_FN_HRX1, GPIO_FN_SCIFB1_RXD, GPIO_FN_VI1_R0_B,
+ GPIO_FN_GLO_SDATA_C, GPIO_FN_VI1_DATA6_C,
+ GPIO_FN_HTX1, GPIO_FN_SCIFB1_TXD, GPIO_FN_VI1_R1_B,
+ GPIO_FN_GLO_SS_C, GPIO_FN_VI1_DATA7_C,
+ GPIO_FN_HSCK1, GPIO_FN_SCIFB1_SCK, GPIO_FN_MLB_CK, GPIO_FN_GLO_RFON_C,
+ GPIO_FN_HCTS1_N, GPIO_FN_SCIFB1_CTS_N,
+ GPIO_FN_MLB_SIG, GPIO_FN_CAN1_TX_B,
+ GPIO_FN_HRTS1_N, GPIO_FN_SCIFB1_RTS_N,
+ GPIO_FN_MLB_DAT, GPIO_FN_CAN1_RX_B,
+};
+
+#endif /* __ASM_R8A7793_H__ */
--- /dev/null
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7793.h
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_R8A7793_H
+#define __ASM_ARCH_R8A7793_H
+
+#include "rcar-base.h"
+
+/*
+ * R8A7793 I/O Addresses
+ */
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+
+#define DBSC3_1_QOS_R0_BASE 0xE67A1000
+#define DBSC3_1_QOS_R1_BASE 0xE67A1100
+#define DBSC3_1_QOS_R2_BASE 0xE67A1200
+#define DBSC3_1_QOS_R3_BASE 0xE67A1300
+#define DBSC3_1_QOS_R4_BASE 0xE67A1400
+#define DBSC3_1_QOS_R5_BASE 0xE67A1500
+#define DBSC3_1_QOS_R6_BASE 0xE67A1600
+#define DBSC3_1_QOS_R7_BASE 0xE67A1700
+#define DBSC3_1_QOS_R8_BASE 0xE67A1800
+#define DBSC3_1_QOS_R9_BASE 0xE67A1900
+#define DBSC3_1_QOS_R10_BASE 0xE67A1A00
+#define DBSC3_1_QOS_R11_BASE 0xE67A1B00
+#define DBSC3_1_QOS_R12_BASE 0xE67A1C00
+#define DBSC3_1_QOS_R13_BASE 0xE67A1D00
+#define DBSC3_1_QOS_R14_BASE 0xE67A1E00
+#define DBSC3_1_QOS_R15_BASE 0xE67A1F00
+#define DBSC3_1_QOS_W0_BASE 0xE67A2000
+#define DBSC3_1_QOS_W1_BASE 0xE67A2100
+#define DBSC3_1_QOS_W2_BASE 0xE67A2200
+#define DBSC3_1_QOS_W3_BASE 0xE67A2300
+#define DBSC3_1_QOS_W4_BASE 0xE67A2400
+#define DBSC3_1_QOS_W5_BASE 0xE67A2500
+#define DBSC3_1_QOS_W6_BASE 0xE67A2600
+#define DBSC3_1_QOS_W7_BASE 0xE67A2700
+#define DBSC3_1_QOS_W8_BASE 0xE67A2800
+#define DBSC3_1_QOS_W9_BASE 0xE67A2900
+#define DBSC3_1_QOS_W10_BASE 0xE67A2A00
+#define DBSC3_1_QOS_W11_BASE 0xE67A2B00
+#define DBSC3_1_QOS_W12_BASE 0xE67A2C00
+#define DBSC3_1_QOS_W13_BASE 0xE67A2D00
+#define DBSC3_1_QOS_W14_BASE 0xE67A2E00
+#define DBSC3_1_QOS_W15_BASE 0xE67A2F00
+
+#define DBSC3_1_DBADJ2 0xE67A00C8
+
+/*
+ * R8A7793 I/O Product Information
+ */
+#define R8A7793_CUT_ES2X 2
+#define IS_R8A7793_ES2() \
+ (rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X)
+
+#endif /* __ASM_ARCH_R8A7793_H */
#include "rcar-base.h"
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+
#endif /* __ASM_ARCH_R8A7794_H */
#define __ASM_ARCH_RCAR_BASE_H
/*
- * R-Car (R8A7790/R8A7791/R8A7794) I/O Addresses
+ * R-Car (R8A7790/R8A7791/R8A7793/R8A7794) I/O Addresses
*/
#define RWDT_BASE 0xE6020000
#define SWDT_BASE 0xE6030000
#define SCIF4_BASE 0xE6EE0000
#define SCIF5_BASE 0xE6EE8000
+/*
+ * SH-I2C
+ * Ch2 and ch3 are different address. These are defined
+ * in the header of each SoCs.
+ */
+#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000
+#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000
+
+/* RCAR-I2C */
+#define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000
+#define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000
+#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000
+#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000
+
#define S3C_BASE 0xE6784000
#define S3C_INT_BASE 0xE6784A00
#define S3C_MEDIA_BASE 0xE6784B00
#include <asm/arch/r8a7790.h>
#elif defined(CONFIG_R8A7791)
#include <asm/arch/r8a7791.h>
+#elif defined(CONFIG_R8A7793)
+#include <asm/arch/r8a7793.h>
#elif defined(CONFIG_R8A7794)
#include <asm/arch/r8a7794.h>
#else
int clock_init(void);
int clock_twi_onoff(int port, int state);
void clock_set_pll1(unsigned int hz);
+void clock_set_pll3(unsigned int hz);
void clock_set_pll5(unsigned int hz);
unsigned int clock_get_pll5p(void);
unsigned int clock_get_pll6(void);
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz);
void clock_init_safe(void);
void clock_init_uart(void);
#endif
u32 gps_clk_cfg; /* 0xd0 */
u32 spi3_clk_cfg; /* 0xd4 */
u8 res5[0x28];
- u32 dram_clk_cfg; /* 0x100 */
+ u32 dram_clk_gate; /* 0x100 */
u32 be0_clk_cfg; /* 0x104 */
u32 be1_clk_cfg; /* 0x108 */
u32 fe0_clk_cfg; /* 0x10c */
/* ahb clock gate bit offset (second register) */
#define AHB_GATE_OFFSET_GMAC 17
+#define AHB_GATE_OFFSET_DE_BE0 12
+#define AHB_GATE_OFFSET_HDMI 11
+#define AHB_GATE_OFFSET_LCD1 5
+#define AHB_GATE_OFFSET_LCD0 4
#define CCM_AHB_GATE_GPS (0x1 << 26)
#define CCM_AHB_GATE_SDRAM (0x1 << 14)
#define CCM_AHB_GATE_DLL (0x1 << 15)
#define CCM_AHB_GATE_ACE (0x1 << 16)
+#define CCM_PLL3_CTRL_M(n) (((n) & 0x7f) << 0)
+#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 15)
+#define CCM_PLL3_CTRL_EN (0x1 << 31)
+
#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0)
#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3)
#define CCM_PLL5_CTRL_M_X(n) ((n) - 1)
#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
+
+#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24)
+#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24)
+#define CCM_LCD_CH0_CTRL_RST (0x1 << 30)
+#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31)
+
+#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+/* We leave bit 11 set to 0, so sclk1 == sclk2 */
+#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24)
+#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24)
+/* Enable / disable both ch1 sclk1 and sclk2 at the same time */
+#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31 | 0x1 << 15)
+
+#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_HDMI_CTRL_PLL_MASK (3 << 24)
+#define CCM_HDMI_CTRL_PLL3 (0 << 24)
+#define CCM_HDMI_CTRL_PLL7 (1 << 24)
+#define CCM_HDMI_CTRL_PLL3_2X (2 << 24)
+#define CCM_HDMI_CTRL_PLL7_2X (3 << 24)
+/* No separate ddc gate on sun4i, sun5i and sun7i */
+#define CCM_HDMI_CTRL_DDC_GATE 0
+#define CCM_HDMI_CTRL_GATE (0x1 << 31)
+
#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
#define CCM_USB_CTRL_PHY1_CLK 0
#define CCM_USB_CTRL_PHY2_CLK 0
+/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */
+#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_DE_CTRL_PLL_MASK (3 << 24)
+#define CCM_DE_CTRL_PLL3 (0 << 24)
+#define CCM_DE_CTRL_PLL7 (1 << 24)
+#define CCM_DE_CTRL_PLL5P (2 << 24)
+#define CCM_DE_CTRL_RST (1 << 30)
+#define CCM_DE_CTRL_GATE (1 << 31)
+
#endif /* _SUNXI_CLOCK_SUN4I_H */
#define CCM_PLL1_CTRL_MAGIC (0x1 << 16)
#define CCM_PLL1_CTRL_EN (0x1 << 31)
+#define CCM_PLL3_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8)
+#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24)
+#define CCM_PLL3_CTRL_EN (0x1 << 31)
+
#define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0)
#define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
#define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8)
#define CCM_PLL5_CTRL_UPD (0x1 << 20)
#define CCM_PLL5_CTRL_EN (0x1 << 31)
-#define PLL6_CFG_DEFAULT 0x90041811
+#define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */
#define CCM_PLL6_CTRL_N_SHIFT 8
#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT)
#define AXI_GATE_OFFSET_DRAM 0
+/* ahb_gate0 offsets */
#define AHB_GATE_OFFSET_USB_OHCI1 30
#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI1 27
#define AHB_GATE_OFFSET_USB_EHCI0 26
#define AHB_GATE_OFFSET_MCTL 14
+#define AHB_GATE_OFFSET_GMAC 17
#define AHB_GATE_OFFSET_MMC3 11
#define AHB_GATE_OFFSET_MMC2 10
#define AHB_GATE_OFFSET_MMC1 9
#define AHB_GATE_OFFSET_MMC0 8
#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n))
+/* ahb_gate1 offsets */
+#define AHB_GATE_OFFSET_DRC0 25
+#define AHB_GATE_OFFSET_DE_BE0 12
+#define AHB_GATE_OFFSET_HDMI 11
+#define AHB_GATE_OFFSET_LCD1 5
+#define AHB_GATE_OFFSET_LCD0 4
+
#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
#define CCM_MMC_CTRL_PLL6 (0x1 << 24)
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+
#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8)
#define CCM_DRAMCLK_CFG_UPD (0x1 << 16)
#define CCM_DRAMCLK_CFG_RST (0x1 << 31)
+#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
+
+#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24)
+#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24)
+#define CCM_LCD_CH0_CTRL_MIPI_PLL (4 << 24)
+#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31)
+
+#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24)
+#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24)
+#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31)
+
+#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_HDMI_CTRL_PLL_MASK (3 << 24)
+#define CCM_HDMI_CTRL_PLL3 (0 << 24)
+#define CCM_HDMI_CTRL_PLL7 (1 << 24)
+#define CCM_HDMI_CTRL_PLL3_2X (2 << 24)
+#define CCM_HDMI_CTRL_PLL7_2X (3 << 24)
+#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30)
+#define CCM_HDMI_CTRL_GATE (0x1 << 31)
+
#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
+/* ahb_reset0 offsets */
+#define AHB_RESET_OFFSET_GMAC 17
#define AHB_RESET_OFFSET_MCTL 14
#define AHB_RESET_OFFSET_MMC3 11
#define AHB_RESET_OFFSET_MMC2 10
#define AHB_RESET_OFFSET_MMC0 8
#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n))
+/* ahb_reset0 offsets */
+#define AHB_RESET_OFFSET_DRC0 25
+#define AHB_RESET_OFFSET_DE_BE0 12
+#define AHB_RESET_OFFSET_HDMI 11
+#define AHB_RESET_OFFSET_LCD1 5
+#define AHB_RESET_OFFSET_LCD0 4
+
/* apb2 reset */
#define APB2_RESET_UART_SHIFT (16)
#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT)
#define APB2_RESET_TWI_SHIFT (0)
#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT)
+/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */
+#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0)
+#define CCM_DE_CTRL_PLL_MASK (0xf << 24)
+#define CCM_DE_CTRL_PLL3 (0 << 24)
+#define CCM_DE_CTRL_PLL7 (1 << 24)
+#define CCM_DE_CTRL_PLL6_2X (2 << 24)
+#define CCM_DE_CTRL_PLL8 (3 << 24)
+#define CCM_DE_CTRL_PLL9 (4 << 24)
+#define CCM_DE_CTRL_PLL10 (5 << 24)
+#define CCM_DE_CTRL_GATE (1 << 31)
+
#endif /* _SUNXI_CLOCK_SUN6I_H */
#define SUNXI_SCR_BASE 0x01c2c400
+#ifndef CONFIG_MACH_SUN6I
#define SUNXI_GPS_BASE 0x01c30000
#define SUNXI_MALI400_BASE 0x01c40000
#define SUNXI_GMAC_BASE 0x01c50000
+#else
+#define SUNXI_GMAC_BASE 0x01c30000
+#endif
#define SUNXI_DRAM_COM_BASE 0x01c62000
#define SUNXI_DRAM_CTL0_BASE 0x01c63000
--- /dev/null
+/*
+ * Sunxi platform display controller register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DISPLAY_H
+#define _SUNXI_DISPLAY_H
+
+struct sunxi_de_be_reg {
+ u8 res0[0x800]; /* 0x000 */
+ u32 mode; /* 0x800 */
+ u32 backcolor; /* 0x804 */
+ u32 disp_size; /* 0x808 */
+ u8 res1[0x4]; /* 0x80c */
+ u32 layer0_size; /* 0x810 */
+ u32 layer1_size; /* 0x814 */
+ u32 layer2_size; /* 0x818 */
+ u32 layer3_size; /* 0x81c */
+ u32 layer0_pos; /* 0x820 */
+ u32 layer1_pos; /* 0x824 */
+ u32 layer2_pos; /* 0x828 */
+ u32 layer3_pos; /* 0x82c */
+ u8 res2[0x10]; /* 0x830 */
+ u32 layer0_stride; /* 0x840 */
+ u32 layer1_stride; /* 0x844 */
+ u32 layer2_stride; /* 0x848 */
+ u32 layer3_stride; /* 0x84c */
+ u32 layer0_addr_low32b; /* 0x850 */
+ u32 layer1_addr_low32b; /* 0x854 */
+ u32 layer2_addr_low32b; /* 0x858 */
+ u32 layer3_addr_low32b; /* 0x85c */
+ u32 layer0_addr_high4b; /* 0x860 */
+ u32 layer1_addr_high4b; /* 0x864 */
+ u32 layer2_addr_high4b; /* 0x868 */
+ u32 layer3_addr_high4b; /* 0x86c */
+ u32 reg_ctrl; /* 0x870 */
+ u8 res3[0xc]; /* 0x874 */
+ u32 color_key_max; /* 0x880 */
+ u32 color_key_min; /* 0x884 */
+ u32 color_key_config; /* 0x888 */
+ u8 res4[0x4]; /* 0x88c */
+ u32 layer0_attr0_ctrl; /* 0x890 */
+ u32 layer1_attr0_ctrl; /* 0x894 */
+ u32 layer2_attr0_ctrl; /* 0x898 */
+ u32 layer3_attr0_ctrl; /* 0x89c */
+ u32 layer0_attr1_ctrl; /* 0x8a0 */
+ u32 layer1_attr1_ctrl; /* 0x8a4 */
+ u32 layer2_attr1_ctrl; /* 0x8a8 */
+ u32 layer3_attr1_ctrl; /* 0x8ac */
+};
+
+struct sunxi_lcdc_reg {
+ u32 ctrl; /* 0x00 */
+ u32 int0; /* 0x04 */
+ u32 int1; /* 0x08 */
+ u8 res0[0x04]; /* 0x0c */
+ u32 frame_ctrl; /* 0x10 */
+ u8 res1[0x2c]; /* 0x14 */
+ u32 tcon0_ctrl; /* 0x40 */
+ u32 tcon0_dclk; /* 0x44 */
+ u32 tcon0_basic_timing0; /* 0x48 */
+ u32 tcon0_basic_timing1; /* 0x4c */
+ u32 tcon0_basic_timing2; /* 0x50 */
+ u32 tcon0_basic_timing3; /* 0x54 */
+ u32 tcon0_hv_intf; /* 0x58 */
+ u8 res2[0x04]; /* 0x5c */
+ u32 tcon0_cpu_intf; /* 0x60 */
+ u32 tcon0_cpu_wr_dat; /* 0x64 */
+ u32 tcon0_cpu_rd_dat0; /* 0x68 */
+ u32 tcon0_cpu_rd_dat1; /* 0x6c */
+ u32 tcon0_ttl_timing0; /* 0x70 */
+ u32 tcon0_ttl_timing1; /* 0x74 */
+ u32 tcon0_ttl_timing2; /* 0x78 */
+ u32 tcon0_ttl_timing3; /* 0x7c */
+ u32 tcon0_ttl_timing4; /* 0x80 */
+ u32 tcon0_lvds_intf; /* 0x84 */
+ u32 tcon0_io_polarity; /* 0x88 */
+ u32 tcon0_io_tristate; /* 0x8c */
+ u32 tcon1_ctrl; /* 0x90 */
+ u32 tcon1_timing_source; /* 0x94 */
+ u32 tcon1_timing_scale; /* 0x98 */
+ u32 tcon1_timing_out; /* 0x9c */
+ u32 tcon1_timing_h; /* 0xa0 */
+ u32 tcon1_timing_v; /* 0xa4 */
+ u32 tcon1_timing_sync; /* 0xa8 */
+ u8 res3[0x44]; /* 0xac */
+ u32 tcon1_io_polarity; /* 0xf0 */
+ u32 tcon1_io_tristate; /* 0xf4 */
+};
+
+struct sunxi_hdmi_reg {
+ u32 version_id; /* 0x000 */
+ u32 ctrl; /* 0x004 */
+ u32 irq; /* 0x008 */
+ u32 hpd; /* 0x00c */
+ u32 video_ctrl; /* 0x010 */
+ u32 video_size; /* 0x014 */
+ u32 video_bp; /* 0x018 */
+ u32 video_fp; /* 0x01c */
+ u32 video_spw; /* 0x020 */
+ u32 video_polarity; /* 0x024 */
+ u8 res0[0x1d8]; /* 0x028 */
+ u32 pad_ctrl0; /* 0x200 */
+ u32 pad_ctrl1; /* 0x204 */
+ u32 pll_ctrl; /* 0x208 */
+ u32 pll_dbg0; /* 0x20c */
+};
+
+/*
+ * DE-BE register constants.
+ */
+#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0)
+#define SUNXI_DE_BE_HEIGHT(y) (((y) - 1) << 16)
+#define SUNXI_DE_BE_MODE_ENABLE (1 << 0)
+#define SUNXI_DE_BE_MODE_START (1 << 1)
+#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8)
+#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5)
+#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0)
+#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8)
+
+/*
+ * LCDC register constants.
+ */
+#define SUNXI_LCDC_X(x) (((x) - 1) << 16)
+#define SUNXI_LCDC_Y(y) (((y) - 1) << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_MASK (1 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON0 (0 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON1 (1 << 0)
+#define SUNXI_LCDC_CTRL_TCON_ENABLE (1 << 31)
+#define SUNXI_LCDC_TCON0_DCLK_ENABLE (0xf << 28)
+#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31)
+#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n) (((n) - 1) << 16)
+#define SUNXI_LCDC_TCON1_TIMING_V_BP(n) (((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n) (((n) * 2) << 16)
+
+/*
+ * HDMI register constants.
+ */
+#define SUNXI_HDMI_X(x) (((x) - 1) << 0)
+#define SUNXI_HDMI_Y(y) (((y) - 1) << 16)
+#define SUNXI_HDMI_CTRL_ENABLE (1 << 31)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF (1 << 0)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF (1 << 1)
+#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73
+#define SUNXI_HDMI_HPD_DETECT (1 << 0)
+#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31)
+#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0)
+#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1)
+#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f
+#define SUNXI_HDMI_PAD_CTRL0_RUN 0x7e8000ff
+#else
+#define SUNXI_HDMI_PAD_CTRL0_HDP 0xfe800000
+#define SUNXI_HDMI_PAD_CTRL0_RUN 0xfe800000
+#endif
+
+#ifdef CONFIG_MACH_SUN4I
+#define SUNXI_HDMI_PAD_CTRL1 0x00d8c820
+#elif defined CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL1 0x01ded030
+#else
+#define SUNXI_HDMI_PAD_CTRL1 0x00d8c830
+#endif
+#define SUNXI_HDMI_PAD_CTRL1_HALVE (1 << 6)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PLL_CTRL 0xba48a308
+#define SUNXI_HDMI_PLL_CTRL_DIV(n) (((n) - 1) << 4)
+#else
+#define SUNXI_HDMI_PLL_CTRL 0xfa4ef708
+#define SUNXI_HDMI_PLL_CTRL_DIV(n) ((n) << 4)
+#endif
+#define SUNXI_HDMI_PLL_CTRL_DIV_MASK (0xf << 4)
+
+#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21)
+#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21)
+
+int sunxi_simplefb_setup(void *blob);
+
+#endif /* _SUNXI_DISPLAY_H */
#define SUNXI_GPIO_OUTPUT 1
#define SUNXI_GPA0_EMAC 2
+#define SUN6I_GPA0_GMAC 2
#define SUN7I_GPA0_GMAC 5
#define SUNXI_GPB0_TWI0 2
}
}
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+static bool boot_nonsec(void)
+{
+ char *s = getenv("bootm_boot_mode");
+#ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
+ bool nonsec = false;
+#else
+ bool nonsec = true;
+#endif
+
+ if (s && !strcmp(s, "sec"))
+ nonsec = false;
+
+ if (s && !strcmp(s, "nonsec"))
+ nonsec = true;
+
+ return nonsec;
+}
+#endif
+
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
if (!fake) {
#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
- armv7_init_nonsec();
- secure_ram_addr(_do_nonsec_entry)(kernel_entry,
- 0, machid, r2);
-#else
- kernel_entry(0, machid, r2);
+ if (boot_nonsec()) {
+ armv7_init_nonsec();
+ secure_ram_addr(_do_nonsec_entry)(kernel_entry,
+ 0, machid, r2);
+ } else
#endif
+ kernel_entry(0, machid, r2);
}
#endif
}
__weak void flush_cache(unsigned long start, unsigned long size)
{
-#if defined(CONFIG_ARM1136)
+#if defined(CONFIG_CPU_ARM1136)
#if !defined(CONFIG_SYS_ICACHE_OFF)
asm("mcr p15, 0, r1, c7, c5, 0"); /* invalidate I cache */
asm("mcr p15, 0, r1, c7, c14, 0"); /* Clean+invalidate D cache */
#endif
-#endif /* CONFIG_ARM1136 */
+#endif /* CONFIG_CPU_ARM1136 */
-#ifdef CONFIG_ARM926EJS
+#ifdef CONFIG_CPU_ARM926EJS
/* test and clean, page 2-23 of arm926ejs manual */
asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
/* disable write buffer as well (page 2-22) */
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
-#endif /* CONFIG_ARM926EJS */
+#endif /* CONFIG_CPU_ARM926EJS */
return;
}
strlo r0, [r1] /* clear 32-bit GD word */
addlo r1, r1, #4 /* move to next */
blo clr_gd
-#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
sub sp, sp, #CONFIG_SYS_MALLOC_F_LEN
str sp, [r9, #GD_MALLOC_BASE]
#endif
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
+/*
+ * now relocate vectors
+ */
+
+ bl relocate_vectors
/* Set up final (full) environment */
#include <config.h>
#include <linux/linkage.h>
+/*
+ * Default/weak exception vectors relocation routine
+ *
+ * This routine covers the standard ARM cases: normal (0x00000000),
+ * high (0xffff0000) and VBAR. SoCs which do not comply with any of
+ * the standard cases must provide their own, strong, version.
+ */
+
+ .section .text.relocate_vectors,"ax",%progbits
+ .weak relocate_vectors
+
+ENTRY(relocate_vectors)
+
+#ifdef CONFIG_HAS_VBAR
+ /*
+ * If the ARM processor has the security extensions,
+ * use VBAR to relocate the exception vectors.
+ */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
+#else
+ /*
+ * Copy the relocated exception vectors to the
+ * correct address
+ * CP15 c1 V bit gives us the location of the vectors:
+ * 0x00000000 or 0xFFFF0000.
+ */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
+ ands r2, r2, #(1 << 13)
+ ldreq r1, =0x00000000 /* If V=0 */
+ ldrne r1, =0xFFFF0000 /* If V=1 */
+ ldmia r0!, {r2-r8,r10}
+ stmia r1!, {r2-r8,r10}
+ ldmia r0!, {r2-r8,r10}
+ stmia r1!, {r2-r8,r10}
+#endif
+ bx lr
+
+ENDPROC(relocate_vectors)
+
/*
* void relocate_code(addr_moni)
*
cmp r2, r3
blo fixloop
- /*
- * Relocate the exception vectors
- */
-#ifdef CONFIG_HAS_VBAR
- /*
- * If the ARM processor has the security extensions,
- * use VBAR to relocate the exception vectors.
- */
- ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
- mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
-#else
- /*
- * Copy the relocated exception vectors to the
- * correct address
- * CP15 c1 V bit gives us the location of the vectors:
- * 0x00000000 or 0xFFFF0000.
- */
- ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
- mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
- ands r2, r2, #(1 << 13)
- ldreq r1, =0x00000000 /* If V=0 */
- ldrne r1, =0xFFFF0000 /* If V=1 */
- ldmia r0!, {r2-r8,r10}
- stmia r1!, {r2-r8,r10}
- ldmia r0!, {r2-r8,r10}
- stmia r1!, {r2-r8,r10}
-#endif
-
relocate_done:
#ifdef __XSCALE__
/* ARMv4- don't know bx lr but the assembler fails to see that */
#ifdef __ARM_ARCH_4__
- mov pc, lr
+ mov pc, lr
#else
- bx lr
+ bx lr
#endif
ENDPROC(relocate_code)
obj-y += interrupts.o
obj-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
obj-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
+
+obj-$(if $(filter at32ap700x,$(SOC)),y) += at32ap700x/
sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
rate = parent_rate;
} else {
- divider = min(255, divider / 2 - 1);
+ divider = min(255UL, divider / 2 - 1);
sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
| SM_BF(DIV, divider));
rate = parent_rate / (2 * (divider + 1));
inbound_len = emudat;
} else {
/* store the bytes */
- leftovers_len = min(4, inbound_len);
+ leftovers_len = min((size_t)4, inbound_len);
inbound_len -= leftovers_len;
leftovers = emudat;
}
*dshift = WDSIZE_P;
#endif
- *bpos = min(limit, ffs(ldst | lsrc | count)) - 1;
+ *bpos = min(limit, (unsigned long)ffs(ldst | lsrc | count)) - 1;
}
/* This version misbehaves for count values of 0 and 2^16+.
#ifdef PSIZE
/* The max memory DMA peripheral transfer size is 4 bytes. */
- dsize |= min(2, bpos) << PSIZE_P;
+ dsize |= min(2UL, bpos) << PSIZE_P;
#endif
/* Copy sram functions from sdram to sram */
extra-y = start.o
obj-y = cache.o
obj-y += cpu.o interrupts.o time.o
+
+obj-$(CONFIG_SOC_AU1X00) += au1x00/
#define readl(a) au_readl((long)(a))
#define writel(v,a) au_writel((v),(int)(a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#define DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
# SPDX-License-Identifier: GPL-2.0+
#
-# necessary to create built-in.o
-obj- := __dummy__.o
-
extra-y = start.o
+
+obj-$(if $(filter ag101,$(SOC)),y) += ag101/
+obj-$(if $(filter ag102,$(SOC)),y) += ag102/
DECLARE_GLOBAL_DATA_PTR;
-void __ft_board_setup(void *blob, bd_t *bd)
+int __ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
-void ft_board_setup(void *blob, bd_t *bd) \
+int ft_board_setup(void *blob, bd_t *bd)
__attribute__((weak, alias("__ft_board_setup")));
void ft_cpu_setup(void *blob, bd_t *bd)
* Note: aliases in the dts are required for this
*/
fdt_fixup_ethernet(blob);
+
+ return 0;
}
#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
* been done in the SPL u-boot version.
*/
GET_GOT /* initialize GOT access */
+
+ /*
+ * The GD (global data) struct needs to get cleared. Lets do
+ * this by calling memset().
+ * This function is called when the platform is build with SPL
+ * support from the main (full-blown) U-Boot. And the GD needs
+ * to get cleared (again) so that the following generic
+ * board support code, defined via CONFIG_SYS_GENERIC_BOARD,
+ * initializes all variables correctly.
+ */
+ mr r3, r2 /* parameter 1: GD pointer */
+ li r4,0 /* parameter 2: value to fill */
+ li r5,GD_SIZE /* parameter 3: count */
+ bl memset
+
bl board_init_f /* run 1st part of board init code (in Flash)*/
/* NOTREACHED - board_init_f() does not return */
#else
#define readl(a) (*((volatile u32 *)(a)))
#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
config TARGET_TQM834X
bool "Support TQM834x"
+config TARGET_HRCON
+ bool "Support hrcon"
+
endchoice
source "board/esd/vme8349/Kconfig"
source "board/sbc8349/Kconfig"
source "board/tqc/tqm834x/Kconfig"
source "board/ve8313/Kconfig"
+source "board/gdsys/mpc8308/Kconfig"
endmenu
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
u64 memsize = (u64)memsize_in_meg << 20;
- memsize = min(memsize, CONFIG_MAX_MEM_MAPPED);
+ memsize = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM);
if (memsize)
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
+ t_wr_ns = max(t_wr_ns, (unsigned long)
spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
}
else
sdram_ddr1 = false;
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ t_rcd_ns = max(t_rcd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 42));
}
}
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ t_wpc_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
}
}
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ ecc = max(ecc,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11));
}
if (ecc == 0)
return;
DECLARE_GLOBAL_DATA_PTR;
-void __ft_board_setup(void *blob, bd_t *bd)
+int __ft_board_setup(void *blob, bd_t *bd)
{
int rc;
int i;
printf("Unable to update property EBC mappings, err=%s\n",
fdt_strerror(rc));
}
+
+ return 0;
}
-void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+int ft_board_setup(void *blob, bd_t *bd)
+ __attribute__((weak, alias("__ft_board_setup")));
/*
* Fixup all PCIe nodes by setting the device_type property
#define readl(a) (*((volatile u32 *)(a)))
#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
#endif
size = min(bootm_size, get_effective_memsize());
- size = min(size, CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
+ size = min(size, (ulong)CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
if (size < bootm_size) {
ulong base = bootmap_base + size;
return os_dirent_typename[OS_FILET_UNKNOWN];
}
-ssize_t os_get_filesize(const char *fname)
+int os_get_filesize(const char *fname, loff_t *size)
{
struct stat buf;
int ret;
ret = stat(fname, &buf);
if (ret)
return ret;
- return buf.st_size;
+ *size = buf.st_size;
+ return 0;
}
void os_putc(int ch)
{
struct sandbox_state *state = state_get_current();
int fd, ret;
- int size;
+ loff_t size;
- size = os_get_filesize(fname);
- if (size < 0)
- return -ENOENT;
+ ret = os_get_filesize(fname, &size);
+ if (ret < 0)
+ return ret;
if (size != state->ram_size)
return -ENOSPC;
fd = open(fname, O_RDONLY);
max_arg_len = 0;
for (i = 0; i < num_options; ++i)
- max_arg_len = max(strlen(sb_opt[i]->flag), max_arg_len);
+ max_arg_len = max((int)strlen(sb_opt[i]->flag), max_arg_len);
max_noarg_len = max_arg_len + 7;
for (i = 0; i < num_options; ++i) {
static int state_read_file(struct sandbox_state *state, const char *fname)
{
- int size;
+ loff_t size;
int ret;
int fd;
- size = os_get_filesize(fname);
- if (size < 0) {
+ ret = os_get_filesize(fname, &size);
+ if (ret < 0) {
printf("Cannot find sandbox state file '%s'\n", fname);
- return -ENOENT;
+ return ret;
}
state->state_fdt = os_malloc(size);
if (!state->state_fdt) {
menu "SuperH architecture"
depends on SH
-config SYS_ARCH
- default "sh"
+config CPU_SH2
+ bool
+
+config CPU_SH2A
+ bool
+ select CPU_SH2
+
+config CPU_SH3
+ bool
+
+config CPU_SH4
+ bool
+
+config CPU_SH4A
+ bool
+ select CPU_SH4
+
+config SH_32BIT
+ bool "32bit mode"
+ depends on CPU_SH4A
+ default n
+ help
+ SH4A has 2 physical memory maps. This use 32bit mode.
+ And this is board specific. Please check your board if you
+ want to use this.
choice
prompt "Target select"
config TARGET_RSK7203
- bool "Support rsk7203"
+ bool "RSK+ 7203"
+ select CPU_SH2A
config TARGET_RSK7264
- bool "Support rsk7264"
+ bool "RSK2+SH7264"
+ select CPU_SH2A
config TARGET_RSK7269
- bool "Support rsk7269"
+ bool "RSK2+SH7269"
+ select CPU_SH2A
config TARGET_MPR2
- bool "Support mpr2"
+ bool "Magic Panel Release 2 board"
+ select CPU_SH3
config TARGET_MS7720SE
bool "Support ms7720se"
+ select CPU_SH3
config TARGET_SHMIN
- bool "Support shmin"
+ bool "SHMIN"
+ select CPU_SH3
config TARGET_ESPT
- bool "Support espt"
+ bool "Data Technology ESPT-GIGA board"
+ select CPU_SH4
config TARGET_MS7722SE
- bool "Support ms7722se"
+ bool "SolutionEngine 7722"
+ select CPU_SH4
config TARGET_MS7750SE
- bool "Support ms7750se"
+ bool "SolutionEngine 7750"
+ select CPU_SH4
config TARGET_AP_SH4A_4A
- bool "Support ap_sh4a_4a"
+ bool "ALPHAPROJECT AP-SH4A-4A"
+ select CPU_SH4A
config TARGET_AP325RXA
- bool "Support ap325rxa"
+ bool "Renesas AP-325RXA"
+ select CPU_SH4
config TARGET_ECOVEC
- bool "Support ecovec"
+ bool "EcoVec"
+ select CPU_SH4A
config TARGET_MIGOR
- bool "Support MigoR"
+ bool "Migo-R"
+ select CPU_SH4
config TARGET_R0P7734
bool "Support r0p7734"
+ select CPU_SH4A
config TARGET_R2DPLUS
- bool "Support r2dplus"
+ bool "Renesas R2D-PLUS"
+ select CPU_SH4
config TARGET_R7780MP
- bool "Support r7780mp"
+ bool "R7780MP board"
+ select CPU_SH4A
config TARGET_SH7752EVB
- bool "Support sh7752evb"
+ bool "SH7752EVB"
+ select CPU_SH4A
config TARGET_SH7753EVB
- bool "Support sh7753evb"
+ bool "SH7753EVB"
+ select CPU_SH4
config TARGET_SH7757LCR
- bool "Support sh7757lcr"
+ bool "SH7757LCR"
+ select CPU_SH4A
config TARGET_SH7763RDP
- bool "Support sh7763rdp"
+ bool "SH7763RDP"
+ select CPU_SH4
config TARGET_SH7785LCR
- bool "Support sh7785lcr"
+ bool "SH7785LCR"
+ select CPU_SH4A
endchoice
+config SYS_ARCH
+ default "sh"
+
+config SYS_CPU
+ default "sh2" if CPU_SH2
+ default "sh3" if CPU_SH3
+ default "sh4" if CPU_SH4
+
source "board/alphaproject/ap_sh4a_4a/Kconfig"
source "board/espt/Kconfig"
source "board/mpr2/Kconfig"
#
ENDIANNESS += -EB
-ifdef CONFIG_SH2A
+ifdef CONFIG_CPU_SH2A
PLATFORM_CPPFLAGS += -m2a -m2a-nofpu -mb
else # SH2
PLATFORM_CPPFLAGS += -m3e -mb
endif
-PLATFORM_CPPFLAGS += -DCONFIG_SH2 $(call cc-option,-mno-fdpic)
+PLATFORM_CPPFLAGS += $(call cc-option,-mno-fdpic)
PLATFORM_LDFLAGS += $(ENDIANNESS)
# SPDX-License-Identifier: GPL-2.0+
#
#
-PLATFORM_CPPFLAGS += -DCONFIG_SH3 -m3
+PLATFORM_CPPFLAGS += -m3
# SPDX-License-Identifier: GPL-2.0+
#
#
-PLATFORM_CPPFLAGS += -DCONFIG_SH4 -m4-nofpu
+PLATFORM_CPPFLAGS += -m4-nofpu
#ifndef __ASM_SH_CACHE_H
#define __ASM_SH_CACHE_H
-#if defined(CONFIG_SH4)
+#if defined(CONFIG_CPU_SH4)
int cache_control(unsigned int cmd);
*/
#define ARCH_DMA_MINALIGN 32
-#endif /* CONFIG_SH4 */
+#endif /* CONFIG_CPU_SH4 */
/*
* Use the L1 data cache line size value for the minimum DMA buffer alignment
#ifndef _ASM_SH_PROCESSOR_H_
#define _ASM_SH_PROCESSOR_H_
-#if defined(CONFIG_SH2)
+#if defined(CONFIG_CPU_SH2)
# include <asm/cpu_sh2.h>
-#elif defined(CONFIG_SH3)
+#elif defined(CONFIG_CPU_SH3)
# include <asm/cpu_sh3.h>
-#elif defined(CONFIG_SH4)
+#elif defined(CONFIG_CPU_SH4)
# include <asm/cpu_sh4.h>
#endif
#endif
obj-y += board.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
-ifeq ($(CONFIG_SH2),y)
+ifeq ($(CONFIG_CPU_SH2),y)
obj-y += time_sh2.o
else
obj-y += time.o
config TARGET_COREBOOT
bool "Support coreboot"
+ help
+ This target is used for running U-Boot on top of Coreboot. In
+ this case Coreboot does the early inititalisation, and U-Boot
+ takes over once the RAM, video and CPU are fully running.
+ U-Boot is loaded as a fallback payload from Coreboot, in
+ Coreboot terminology. This method was used for the Chromebook
+ Pixel when launched.
+
+config TARGET_CHROMEBOOK_LINK
+ bool "Support Chromebook link"
+ help
+ This is the Chromebook Pixel released in 2013. It uses an Intel
+ i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
+ SDRAM. It has a Panther Point platform controller hub, PCIe
+ WiFi and Bluetooth. It also includes a 720p webcam, USB SD
+ reader, microphone and speakers, display port and 32GB SATA
+ solid state drive. There is a Chrome OS EC connected on LPC,
+ and it provides a 2560x1700 high resolution touch-enabled LCD
+ display.
endchoice
-source "board/chromebook-x86/coreboot/Kconfig"
+config RAMBASE
+ hex
+ default 0x100000
+
+config RAMTOP
+ hex
+ default 0x200000
+
+config XIP_ROM_SIZE
+ hex
+ default 0x10000
+
+config CPU_ADDR_BITS
+ int
+ default 36
+
+config HPET_ADDRESS
+ hex
+ default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
+
+config SMM_TSEG
+ bool
+ default n
+
+config SMM_TSEG_SIZE
+ hex
+
+config ROM_SIZE
+ hex
+ default 0x800000
+
+config HAVE_INTEL_ME
+ bool "Platform requires Intel Management Engine"
+ help
+ Newer higher-end devices have an Intel Management Engine (ME)
+ which is a very large binary blob (typically 1.5MB) which is
+ required for the platform to work. This enforces a particular
+ SPI flash format. You will need to supply the me.bin file in
+ your board directory.
+
+config X86_RAMTEST
+ bool "Perform a simple RAM test after SDRAM initialisation"
+ help
+ If there is something wrong with SDRAM then the platform will
+ often crash within U-Boot or the kernel. This option enables a
+ very simple RAM test that quickly checks whether the SDRAM seems
+ to work correctly. It is not exhaustive but can save time by
+ detecting obvious failures.
+
+source "arch/x86/cpu/ivybridge/Kconfig"
+
+source "board/coreboot/coreboot/Kconfig"
+
+source "board/google/chromebook_link/Kconfig"
endmenu
$(call cc-option, -mpreferred-stack-boundary=2)
PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86)
PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
-PLATFORM_CPPFLAGS += -DREALMODE_BASE=0x7c0
PLATFORM_CPPFLAGS += -march=i386 -m32
# Support generic board on x86
extra-y = start.o
obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o
obj-y += interrupts.o cpu.o call64.o
+
+obj-$(CONFIG_SYS_COREBOOT) += coreboot/
+obj-$(CONFIG_PCI) += pci.o
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SYS_COREBOOT) += car.o
-obj-$(CONFIG_SYS_COREBOOT) += coreboot.o
-obj-$(CONFIG_SYS_COREBOOT) += tables.o
-obj-$(CONFIG_SYS_COREBOOT) += ipchecksum.o
-obj-$(CONFIG_SYS_COREBOOT) += sdram.o
-obj-$(CONFIG_SYS_COREBOOT) += timestamp.o
+obj-y += car.o
+obj-y += coreboot.o
+obj-y += tables.o
+obj-y += ipchecksum.o
+obj-y += sdram.o
+obj-y += timestamp.o
obj-$(CONFIG_PCI) += pci.o
#include <ns16550.h>
#include <asm/msr.h>
#include <asm/cache.h>
+#include <asm/cpu.h>
#include <asm/io.h>
-#include <asm/arch-coreboot/tables.h>
-#include <asm/arch-coreboot/sysinfo.h>
+#include <asm/arch/tables.h>
+#include <asm/arch/sysinfo.h>
#include <asm/arch/timestamp.h>
DECLARE_GLOBAL_DATA_PTR;
-/*
- * Miscellaneous platform dependent initializations
- */
-int cpu_init_f(void)
+int arch_cpu_init(void)
{
int ret = get_coreboot_info(&lib_sysinfo);
- if (ret != 0)
+ if (ret != 0) {
printf("Failed to parse coreboot tables.\n");
+ return ret;
+ }
timestamp_init();
- return ret;
+ return x86_cpu_init_f();
}
int board_early_init_f(void)
return 0;
}
-void show_boot_progress(int val)
+int print_cpuinfo(void)
{
-#if MIN_PORT80_KCLOCKS_DELAY
- /*
- * Scale the time counter reading to avoid using 64 bit arithmetics.
- * Can't use get_timer() here becuase it could be not yet
- * initialized or even implemented.
- */
- if (!gd->arch.tsc_prev) {
- gd->arch.tsc_base_kclocks = rdtsc() / 1000;
- gd->arch.tsc_prev = 0;
- } else {
- uint32_t now;
-
- do {
- now = rdtsc() / 1000 - gd->arch.tsc_base_kclocks;
- } while (now < (gd->arch.tsc_prev + MIN_PORT80_KCLOCKS_DELAY));
- gd->arch.tsc_prev = now;
- }
-#endif
- outb(val, 0x80);
+ return default_print_cpuinfo();
}
int last_stage_init(void)
#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
-int board_final_cleanup(void)
+void board_final_cleanup(void)
{
/* Un-cache the ROM so the kernel has one
* more MTRR available.
/* Issue SMI to Coreboot to lock down ME and registers */
printf("Finalizing Coreboot\n");
outb(0xcb, 0xb2);
-
- return 0;
}
void panic_puts(const char *str)
*/
#include <compiler.h>
-#include <asm/arch-coreboot/ipchecksum.h>
+#include <asm/arch/ipchecksum.h>
unsigned short ipchksum(const void *vptr, unsigned long nbytes)
{
#include <pci.h>
#include <asm/pci.h>
-static struct pci_controller coreboot_hose;
-
static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
struct pci_config_table *table)
{
u8 secondary;
hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
- hose->last_busno = max(hose->last_busno, secondary);
+ hose->last_busno = max(hose->last_busno, (int)secondary);
pci_hose_scan_bus(hose, secondary);
}
{}
};
-void pci_init_board(void)
+void board_pci_setup_hose(struct pci_controller *hose)
{
- coreboot_hose.config_table = pci_coreboot_config_table;
- coreboot_hose.first_busno = 0;
- coreboot_hose.last_busno = 0;
-
- pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff,
- PCI_REGION_MEM);
- coreboot_hose.region_count = 1;
-
- pci_setup_type1(&coreboot_hose);
-
- pci_register_hose(&coreboot_hose);
+ hose->config_table = pci_coreboot_config_table;
+ hose->first_busno = 0;
+ hose->last_busno = 0;
- pci_hose_scan(&coreboot_hose);
+ pci_set_region(hose->regions + 0, 0x0, 0x0, 0xffffffff,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
}
#include <asm/e820.h>
#include <asm/u-boot-x86.h>
#include <asm/global_data.h>
+#include <asm/init_helpers.h>
#include <asm/processor.h>
#include <asm/sections.h>
+#include <asm/zimage.h>
#include <asm/arch/sysinfo.h>
#include <asm/arch/tables.h>
{
int i;
- unsigned num_entries = min(lib_sysinfo.n_memranges, max_entries);
+ unsigned num_entries = min((unsigned)lib_sysinfo.n_memranges, max_entries);
if (num_entries < lib_sysinfo.n_memranges) {
printf("Warning: Limiting e820 map to %d entries.\n",
num_entries);
return (ulong)dest_addr;
}
-int dram_init_f(void)
+int dram_init(void)
{
int i;
phys_size_t ram_size = 0;
gd->ram_size = ram_size;
if (ram_size == 0)
return -1;
- return 0;
+
+ return calculate_relocation_address();
}
-int dram_init_banksize(void)
+void dram_init_banksize(void)
{
int i, j;
}
}
}
- return 0;
-}
-
-int dram_init(void)
-{
- return dram_init_banksize();
}
*/
#include <common.h>
-#include <asm/arch-coreboot/ipchecksum.h>
-#include <asm/arch-coreboot/sysinfo.h>
-#include <asm/arch-coreboot/tables.h>
+#include <asm/arch/ipchecksum.h>
+#include <asm/arch/sysinfo.h>
+#include <asm/arch/tables.h>
/*
* This needs to be in the .data section so that it's copied over during
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
+ * Part of this file is adapted from coreboot
+ * src/arch/x86/lib/cpu.c
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
#include <malloc.h>
#include <asm/control_regs.h>
#include <asm/cpu.h>
+#include <asm/post.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <asm/interrupt.h>
#include <linux/compiler.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Constructor for a conventional segment GDT (or LDT) entry
* This is a macro so it can be used in initialisers
u32 ptr;
} __packed;
+struct cpu_device_id {
+ unsigned vendor;
+ unsigned device;
+};
+
+struct cpuinfo_x86 {
+ uint8_t x86; /* CPU family */
+ uint8_t x86_vendor; /* CPU vendor */
+ uint8_t x86_model;
+ uint8_t x86_mask;
+};
+
+/*
+ * List of cpu vendor strings along with their normalized
+ * id values.
+ */
+static struct {
+ int vendor;
+ const char *name;
+} x86_vendors[] = {
+ { X86_VENDOR_INTEL, "GenuineIntel", },
+ { X86_VENDOR_CYRIX, "CyrixInstead", },
+ { X86_VENDOR_AMD, "AuthenticAMD", },
+ { X86_VENDOR_UMC, "UMC UMC UMC ", },
+ { X86_VENDOR_NEXGEN, "NexGenDriven", },
+ { X86_VENDOR_CENTAUR, "CentaurHauls", },
+ { X86_VENDOR_RISE, "RiseRiseRise", },
+ { X86_VENDOR_TRANSMETA, "GenuineTMx86", },
+ { X86_VENDOR_TRANSMETA, "TransmetaCPU", },
+ { X86_VENDOR_NSC, "Geode by NSC", },
+ { X86_VENDOR_SIS, "SiS SiS SiS ", },
+};
+
+static const char *const x86_vendor_name[] = {
+ [X86_VENDOR_INTEL] = "Intel",
+ [X86_VENDOR_CYRIX] = "Cyrix",
+ [X86_VENDOR_AMD] = "AMD",
+ [X86_VENDOR_UMC] = "UMC",
+ [X86_VENDOR_NEXGEN] = "NexGen",
+ [X86_VENDOR_CENTAUR] = "Centaur",
+ [X86_VENDOR_RISE] = "Rise",
+ [X86_VENDOR_TRANSMETA] = "Transmeta",
+ [X86_VENDOR_NSC] = "NSC",
+ [X86_VENDOR_SIS] = "SiS",
+};
+
static void load_ds(u32 segment)
{
asm volatile("movl %0, %%ds" : : "r" (segment * X86_GDT_ENTRY_SIZE));
return 0;
}
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+ unsigned int test;
+
+ __asm__ __volatile__(
+ "sahf\n\t" /* clear flags (%eax = 0x0005) */
+ "div %b2\n\t" /* divide 5 by 2 */
+ "lahf" /* store flags into %ah */
+ : "=a" (test)
+ : "0" (5), "q" (2)
+ : "cc");
+
+ /* AH is 0x02 on Cyrix after the divide.. */
+ return (unsigned char) (test >> 8) == 0x02;
+}
+
+/*
+ * Detect a NexGen CPU running without BIOS hypercode new enough
+ * to have CPUID. (Thanks to Herbert Oppmann)
+ */
+
+static int deep_magic_nexgen_probe(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ " movw $0x5555, %%ax\n"
+ " xorw %%dx,%%dx\n"
+ " movw $2, %%cx\n"
+ " divw %%cx\n"
+ " movl $0, %%eax\n"
+ " jnz 1f\n"
+ " movl $1, %%eax\n"
+ "1:\n"
+ : "=a" (ret) : : "cx", "dx");
+ return ret;
+}
+
+static bool has_cpuid(void)
+{
+ return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+static int build_vendor_name(char *vendor_name)
+{
+ struct cpuid_result result;
+ result = cpuid(0x00000000);
+ unsigned int *name_as_ints = (unsigned int *)vendor_name;
+
+ name_as_ints[0] = result.ebx;
+ name_as_ints[1] = result.edx;
+ name_as_ints[2] = result.ecx;
+
+ return result.eax;
+}
+
+static void identify_cpu(struct cpu_device_id *cpu)
+{
+ char vendor_name[16];
+ int i;
+
+ vendor_name[0] = '\0'; /* Unset */
+ cpu->device = 0; /* fix gcc 4.4.4 warning */
+
+ /* Find the id and vendor_name */
+ if (!has_cpuid()) {
+ /* Its a 486 if we can modify the AC flag */
+ if (flag_is_changeable_p(X86_EFLAGS_AC))
+ cpu->device = 0x00000400; /* 486 */
+ else
+ cpu->device = 0x00000300; /* 386 */
+ if ((cpu->device == 0x00000400) && test_cyrix_52div()) {
+ memcpy(vendor_name, "CyrixInstead", 13);
+ /* If we ever care we can enable cpuid here */
+ }
+ /* Detect NexGen with old hypercode */
+ else if (deep_magic_nexgen_probe())
+ memcpy(vendor_name, "NexGenDriven", 13);
+ }
+ if (has_cpuid()) {
+ int cpuid_level;
+
+ cpuid_level = build_vendor_name(vendor_name);
+ vendor_name[12] = '\0';
+
+ /* Intel-defined flags: level 0x00000001 */
+ if (cpuid_level >= 0x00000001) {
+ cpu->device = cpuid_eax(0x00000001);
+ } else {
+ /* Have CPUID level 0 only unheard of */
+ cpu->device = 0x00000400;
+ }
+ }
+ cpu->vendor = X86_VENDOR_UNKNOWN;
+ for (i = 0; i < ARRAY_SIZE(x86_vendors); i++) {
+ if (memcmp(vendor_name, x86_vendors[i].name, 12) == 0) {
+ cpu->vendor = x86_vendors[i].vendor;
+ break;
+ }
+ }
+}
+
+static inline void get_fms(struct cpuinfo_x86 *c, uint32_t tfms)
+{
+ c->x86 = (tfms >> 8) & 0xf;
+ c->x86_model = (tfms >> 4) & 0xf;
+ c->x86_mask = tfms & 0xf;
+ if (c->x86 == 0xf)
+ c->x86 += (tfms >> 20) & 0xff;
+ if (c->x86 >= 0x6)
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+}
+
int x86_cpu_init_f(void)
{
const u32 em_rst = ~X86_CR0_EM;
"movl %%eax, %%cr0\n" \
: : "i" (em_rst), "i" (mp_ne_set) : "eax");
+ /* identify CPU via cpuid and store the decoded info into gd->arch */
+ if (has_cpuid()) {
+ struct cpu_device_id cpu;
+ struct cpuinfo_x86 c;
+
+ identify_cpu(&cpu);
+ get_fms(&c, cpu.device);
+ gd->arch.x86 = c.x86;
+ gd->arch.x86_vendor = cpu.vendor;
+ gd->arch.x86_model = c.x86_model;
+ gd->arch.x86_mask = c.x86_mask;
+ gd->arch.x86_device = cpu.device;
+ }
+
return 0;
}
-int cpu_init_f(void) __attribute__((weak, alias("x86_cpu_init_f")));
int x86_cpu_init_r(void)
{
"generate_gpf:\n"
"ljmp $0x70, $0x47114711\n");
-void __reset_cpu(ulong addr)
+__weak void reset_cpu(ulong addr)
{
printf("Resetting using x86 Triple Fault\n");
set_vector(13, generate_gpf); /* general protection fault handler */
set_vector(8, generate_gpf); /* double fault handler */
generate_gpf(); /* start the show */
}
-void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu")));
int dcache_status(void)
{
: "eax");
}
-static bool has_cpuid(void)
+static bool can_detect_long_mode(void)
{
- unsigned long flag;
-
- asm volatile("pushf\n" \
- "pop %%eax\n"
- "mov %%eax, %%ecx\n" /* ecx = flags */
- "xor %1, %%eax\n"
- "push %%eax\n"
- "popf\n" /* flags ^= $2 */
- "pushf\n"
- "pop %%eax\n" /* eax = flags */
- "push %%ecx\n"
- "popf\n" /* flags = ecx */
- "xor %%ecx, %%eax\n"
- "mov %%eax, %0"
- : "=r" (flag)
- : "i" (1 << 21)
- : "eax", "ecx", "memory");
+ return cpuid_eax(0x80000000) > 0x80000000UL;
+}
- return flag != 0;
+static bool has_long_mode(void)
+{
+ return cpuid_edx(0x80000001) & (1 << 29) ? true : false;
}
-static bool can_detect_long_mode(void)
+int cpu_has_64bit(void)
{
- unsigned long flag;
+ return has_cpuid() && can_detect_long_mode() &&
+ has_long_mode();
+}
- asm volatile("mov $0x80000000, %%eax\n"
- "cpuid\n"
- "mov %%eax, %0"
- : "=r" (flag)
- :
- : "eax", "ebx", "ecx", "edx", "memory");
+const char *cpu_vendor_name(int vendor)
+{
+ const char *name;
+ name = "<invalid cpu vendor>";
+ if ((vendor < (ARRAY_SIZE(x86_vendor_name))) &&
+ (x86_vendor_name[vendor] != 0))
+ name = x86_vendor_name[vendor];
- return flag > 0x80000000UL;
+ return name;
}
-static bool has_long_mode(void)
+char *cpu_get_name(char *name)
{
- unsigned long flag;
+ unsigned int *name_as_ints = (unsigned int *)name;
+ struct cpuid_result regs;
+ char *ptr;
+ int i;
- asm volatile("mov $0x80000001, %%eax\n"
- "cpuid\n"
- "mov %%edx, %0"
- : "=r" (flag)
- :
- : "eax", "ebx", "ecx", "edx", "memory");
+ /* This bit adds up to 48 bytes */
+ for (i = 0; i < 3; i++) {
+ regs = cpuid(0x80000002 + i);
+ name_as_ints[i * 4 + 0] = regs.eax;
+ name_as_ints[i * 4 + 1] = regs.ebx;
+ name_as_ints[i * 4 + 2] = regs.ecx;
+ name_as_ints[i * 4 + 3] = regs.edx;
+ }
+ name[CPU_MAX_NAME_LEN - 1] = '\0';
- return flag & (1 << 29) ? true : false;
-}
+ /* Skip leading spaces. */
+ ptr = name;
+ while (*ptr == ' ')
+ ptr++;
-int cpu_has_64bit(void)
-{
- return has_cpuid() && can_detect_long_mode() &&
- has_long_mode();
+ return ptr;
}
-int print_cpuinfo(void)
+int default_print_cpuinfo(void)
{
- printf("CPU: %s\n", cpu_has_64bit() ? "x86_64" : "x86");
+ printf("CPU: %s, vendor %s, device %xh\n",
+ cpu_has_64bit() ? "x86_64" : "x86",
+ cpu_vendor_name(gd->arch.x86_vendor), gd->arch.x86_device);
return 0;
}
return -EFAULT;
}
+
+void show_boot_progress(int val)
+{
+#if MIN_PORT80_KCLOCKS_DELAY
+ /*
+ * Scale the time counter reading to avoid using 64 bit arithmetics.
+ * Can't use get_timer() here becuase it could be not yet
+ * initialized or even implemented.
+ */
+ if (!gd->arch.tsc_prev) {
+ gd->arch.tsc_base_kclocks = rdtsc() / 1000;
+ gd->arch.tsc_prev = 0;
+ } else {
+ uint32_t now;
+
+ do {
+ now = rdtsc() / 1000 - gd->arch.tsc_base_kclocks;
+ } while (now < (gd->arch.tsc_prev + MIN_PORT80_KCLOCKS_DELAY));
+ gd->arch.tsc_prev = now;
+ }
+#endif
+ outb(val, POST_PORT);
+}
"pushl $"#x"\n" \
"jmp irq_common_entry\n"
-void dump_regs(struct irq_regs *regs)
+static void dump_regs(struct irq_regs *regs)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
unsigned long d0, d1, d2, d3, d6, d7;
--- /dev/null
+#
+# From Coreboot src/northbridge/intel/sandybridge/Kconfig
+#
+# Copyright (C) 2010 Google Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+
+
+config NORTHBRIDGE_INTEL_SANDYBRIDGE
+ bool
+ select CACHE_MRC_BIN
+ select CPU_INTEL_MODEL_206AX
+
+config NORTHBRIDGE_INTEL_IVYBRIDGE
+ bool
+ select CACHE_MRC_BIN
+ select CPU_INTEL_MODEL_306AX
+
+if NORTHBRIDGE_INTEL_SANDYBRIDGE
+
+config VGA_BIOS_ID
+ string
+ default "8086,0106"
+
+config CACHE_MRC_SIZE_KB
+ int
+ default 256
+
+config MRC_CACHE_BASE
+ hex
+ default 0xff800000
+
+config MRC_CACHE_LOCATION
+ hex
+ depends on !CHROMEOS
+ default 0x1ec000
+
+config MRC_CACHE_SIZE
+ hex
+ depends on !CHROMEOS
+ default 0x10000
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xff7f0000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x10000
+
+endif
+
+if NORTHBRIDGE_INTEL_IVYBRIDGE
+
+config VGA_BIOS_ID
+ string
+ default "8086,0166"
+
+config EXTERNAL_MRC_BLOB
+ bool
+ default n
+
+config CACHE_MRC_SIZE_KB
+ int
+ default 512
+
+config MRC_CACHE_BASE
+ hex
+ default 0xff800000
+
+config MRC_CACHE_LOCATION
+ hex
+ depends on !CHROMEOS
+ default 0x370000
+
+config MRC_CACHE_SIZE
+ hex
+ depends on !CHROMEOS
+ default 0x10000
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xff7e0000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x20000
+
+endif
+
+if NORTHBRIDGE_INTEL_SANDYBRIDGE || NORTHBRIDGE_INTEL_IVYBRIDGE
+
+config HAVE_MRC
+ bool "Add a System Agent binary"
+ help
+ Select this option to add a System Agent binary to
+ the resulting U-Boot image. MRC stands for Memory Reference Code.
+ It is a binary blob which U-Boot uses to set up SDRAM.
+
+ Note: Without this binary U-Boot will not be able to set up its
+ SDRAM so will not boot.
+
+config DCACHE_RAM_MRC_VAR_SIZE
+ hex
+ default 0x4000
+ help
+ This is the amount of CAR (Cache as RAM) reserved for use by the
+ memory reference code. This should be set to 16KB (0x4000 hex)
+ so that MRC has enough space to run.
+
+config MRC_FILE
+ string "Intel System Agent path and filename"
+ depends on HAVE_MRC
+ default "systemagent-ivybridge.bin" if NORTHBRIDGE_INTEL_IVYBRIDGE
+ default "systemagent-sandybridge.bin" if NORTHBRIDGE_INTEL_SANDYBRIDGE
+ help
+ The path and filename of the file to use as System Agent
+ binary.
+
+config CPU_SPECIFIC_OPTIONS
+ def_bool y
+ select SMM_TSEG
+ select ARCH_BOOTBLOCK_X86_32
+ select ARCH_ROMSTAGE_X86_32
+ select ARCH_RAMSTAGE_X86_32
+ select SMP
+ select SSE2
+ select UDELAY_LAPIC
+ select CPU_MICROCODE_IN_CBFS
+ select TSC_SYNC_MFENCE
+ select HAVE_INTEL_ME
+ select X86_RAMTEST
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x800000
+
+config ENABLE_VMX
+ bool "Enable VMX for virtualization"
+ default n
+ help
+ Virtual Machine Extensions are provided in many x86 CPUs. These
+ provide various facilities for allowing a host OS to provide an
+ environment where potentially several guest OSes have only
+ limited access to the underlying hardware. This is achieved
+ without resorting to software trapping and/or instruction set
+ emulation (which would be very slow).
+
+ Intel's implementation of this is called VT-x. This option enables
+ VT-x this so that the OS that is booted by U-Boot can make use of
+ these facilities. If this option is not enabled, then the host OS
+ will be unable to support virtualisation, or it will run very
+ slowly.
+
+endif
+
+config CPU_INTEL_SOCKET_RPGA989
+ bool
+
+if CPU_INTEL_SOCKET_RPGA989
+
+config SOCKET_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select MMX
+ select SSE
+ select CACHE_AS_RAM
+
+config CACHE_MRC_BIN
+ bool
+ default n
+
+endif
--- /dev/null
+#
+# Copyright (c) 2014 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += car.o
+obj-y += cpu.o
+obj-y += early_init.o
+obj-y += early_me.o
+obj-y += lpc.o
+obj-y += me_status.o
+obj-y += microcode_intel.o
+obj-y += pci.o
+obj-y += report_platform.o
+obj-y += sdram.o
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot file cpu/intel/model_206ax/cache_as_ram.inc
+ *
+ * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
+ * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan)
+ * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/mtrr.h>
+#include <asm/post.h>
+#include <asm/processor-flags.h>
+
+#define MTRR_PHYS_BASE_MSR(reg) (0x200 + 2 * (reg))
+#define MTRR_PHYS_MASK_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
+#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
+
+/* Cache 4GB - MRC_SIZE_KB for MRC */
+#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1)
+#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES)
+#define CACHE_MRC_MASK (~CACHE_MRC_BYTES)
+
+#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1)
+
+#define NOEVICTMOD_MSR 0x2e0
+
+ /*
+ * Note: ebp must not be touched in this code as it holds the BIST
+ * value (built-in self test). We preserve this value until it can
+ * be written to global_data when CAR is ready for use.
+ */
+.globl car_init
+car_init:
+ post_code(POST_CAR_START)
+
+ /* Send INIT IPI to all excluding ourself */
+ movl $0x000C4500, %eax
+ movl $0xFEE00300, %esi
+ movl %eax, (%esi)
+
+ post_code(POST_CAR_SIPI)
+ /* Zero out all fixed range and variable range MTRRs */
+ movl $mtrr_table, %esi
+ movl $((mtrr_table_end - mtrr_table) / 2), %edi
+ xorl %eax, %eax
+ xorl %edx, %edx
+clear_mtrrs:
+ movw (%esi), %bx
+ movzx %bx, %ecx
+ wrmsr
+ add $2, %esi
+ dec %edi
+ jnz clear_mtrrs
+
+ post_code(POST_CAR_MTRR)
+ /* Configure the default memory type to uncacheable */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ andl $(~0x00000cff), %eax
+ wrmsr
+
+ post_code(POST_CAR_UNCACHEABLE)
+ /* Set Cache-as-RAM base address */
+ movl $(MTRR_PHYS_BASE_MSR(0)), %ecx
+ movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
+ xorl %edx, %edx
+ wrmsr
+
+ post_code(POST_CAR_BASE_ADDRESS)
+ /* Set Cache-as-RAM mask */
+ movl $(MTRR_PHYS_MASK_MSR(0)), %ecx
+ movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax
+ movl $CPU_PHYSMASK_HI, %edx
+ wrmsr
+
+ post_code(POST_CAR_MASK)
+
+ /* Enable MTRR */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ orl $MTRRdefTypeEn, %eax
+ wrmsr
+
+ /* Enable cache (CR0.CD = 0, CR0.NW = 0) */
+ movl %cr0, %eax
+ andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
+ invd
+ movl %eax, %cr0
+
+ /* enable the 'no eviction' mode */
+ movl $NOEVICTMOD_MSR, %ecx
+ rdmsr
+ orl $1, %eax
+ andl $~2, %eax
+ wrmsr
+
+ /* Clear the cache memory region. This will also fill up the cache */
+ movl $CACHE_AS_RAM_BASE, %esi
+ movl %esi, %edi
+ movl $(CACHE_AS_RAM_SIZE / 4), %ecx
+ xorl %eax, %eax
+ rep stosl
+
+ /* enable the 'no eviction run' state */
+ movl $NOEVICTMOD_MSR, %ecx
+ rdmsr
+ orl $3, %eax
+ wrmsr
+
+ post_code(POST_CAR_FILL)
+ /* Enable Cache-as-RAM mode by disabling cache */
+ movl %cr0, %eax
+ orl $X86_CR0_CD, %eax
+ movl %eax, %cr0
+
+ /* Enable cache for our code in Flash because we do XIP here */
+ movl $MTRR_PHYS_BASE_MSR(1), %ecx
+ xorl %edx, %edx
+ movl $car_init_ret, %eax
+ andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax
+ orl $MTRR_TYPE_WRPROT, %eax
+ wrmsr
+
+ movl $MTRR_PHYS_MASK_MSR(1), %ecx
+ movl $CPU_PHYSMASK_HI, %edx
+ movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax
+ wrmsr
+
+ post_code(POST_CAR_ROM_CACHE)
+#ifdef CONFIG_CACHE_MRC_BIN
+ /* Enable caching for ram init code to run faster */
+ movl $MTRR_PHYS_BASE_MSR(2), %ecx
+ movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax
+ xorl %edx, %edx
+ wrmsr
+ movl $MTRR_PHYS_MASK_MSR(2), %ecx
+ movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax
+ movl $CPU_PHYSMASK_HI, %edx
+ wrmsr
+#endif
+
+ post_code(POST_CAR_MRC_CACHE)
+ /* Enable cache */
+ movl %cr0, %eax
+ andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
+ movl %eax, %cr0
+
+ post_code(POST_CAR_CPU_CACHE)
+
+ /* All CPUs need to be in Wait for SIPI state */
+wait_for_sipi:
+ movl (%esi), %eax
+ bt $12, %eax
+ jc wait_for_sipi
+
+ /* return */
+ jmp car_init_ret
+
+mtrr_table:
+ /* Fixed MTRRs */
+ .word 0x250, 0x258, 0x259
+ .word 0x268, 0x269, 0x26A
+ .word 0x26B, 0x26C, 0x26D
+ .word 0x26E, 0x26F
+ /* Variable MTRRs */
+ .word 0x200, 0x201, 0x202, 0x203
+ .word 0x204, 0x205, 0x206, 0x207
+ .word 0x208, 0x209, 0x20A, 0x20B
+ .word 0x20C, 0x20D, 0x20E, 0x20F
+ .word 0x210, 0x211, 0x212, 0x213
+mtrr_table_end:
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * Some portions from coreboot src/mainboard/google/link/romstage.c
+ * and src/cpu/intel/model_206ax/bootblock.c
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/lapic.h>
+#include <asm/msr.h>
+#include <asm/mtrr.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/arch/model_206ax.h>
+#include <asm/arch/microcode.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void enable_port80_on_lpc(struct pci_controller *hose, pci_dev_t dev)
+{
+ /* Enable port 80 POST on LPC */
+ pci_hose_write_config_dword(hose, dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+ clrbits_le32(RCB_REG(GCS), 4);
+}
+
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(struct pci_controller *hose, pci_dev_t dev)
+{
+ u8 reg8;
+
+ pci_hose_read_config_byte(hose, dev, 0xdc, ®8);
+ reg8 &= ~(3 << 2);
+ reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
+ pci_hose_write_config_byte(hose, dev, 0xdc, reg8);
+}
+
+static void set_var_mtrr(
+ unsigned reg, unsigned base, unsigned size, unsigned type)
+
+{
+ /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
+ /* FIXME: It only support 4G less range */
+ wrmsr(MTRRphysBase_MSR(reg), base | type, 0);
+ wrmsr(MTRRphysMask_MSR(reg), ~(size - 1) | MTRRphysMaskValid,
+ (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1);
+}
+
+static void enable_rom_caching(void)
+{
+ disable_caches();
+ set_var_mtrr(1, 0xffc00000, 4 << 20, MTRR_TYPE_WRPROT);
+ enable_caches();
+
+ /* Enable Variable MTRRs */
+ wrmsr(MTRRdefType_MSR, 0x800, 0);
+}
+
+static int set_flex_ratio_to_tdp_nominal(void)
+{
+ msr_t flex_ratio, msr;
+ u8 nominal_ratio;
+
+ /* Minimum CPU revision for configurable TDP support */
+ if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID)
+ return -EINVAL;
+
+ /* Check for Flex Ratio support */
+ flex_ratio = msr_read(MSR_FLEX_RATIO);
+ if (!(flex_ratio.lo & FLEX_RATIO_EN))
+ return -EINVAL;
+
+ /* Check for >0 configurable TDPs */
+ msr = msr_read(MSR_PLATFORM_INFO);
+ if (((msr.hi >> 1) & 3) == 0)
+ return -EINVAL;
+
+ /* Use nominal TDP ratio for flex ratio */
+ msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
+ nominal_ratio = msr.lo & 0xff;
+
+ /* See if flex ratio is already set to nominal TDP ratio */
+ if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
+ return 0;
+
+ /* Set flex ratio to nominal TDP ratio */
+ flex_ratio.lo &= ~0xff00;
+ flex_ratio.lo |= nominal_ratio << 8;
+ flex_ratio.lo |= FLEX_RATIO_LOCK;
+ msr_write(MSR_FLEX_RATIO, flex_ratio);
+
+ /* Set flex ratio in soft reset data register bits 11:6 */
+ clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
+ (nominal_ratio & 0x3f) << 6);
+
+ /* Set soft reset control to use register value */
+ setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
+
+ /* Issue warm reset, will be "CPU only" due to soft reset data */
+ outb(0x0, PORT_RESET);
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+
+ /* Not reached */
+ return -EINVAL;
+}
+
+static void set_spi_speed(void)
+{
+ u32 fdod;
+
+ /* Observe SPI Descriptor Component Section 0 */
+ writel(0x1000, RCB_REG(SPI_DESC_COMP0));
+
+ /* Extract the1 Write/Erase SPI Frequency from descriptor */
+ fdod = readl(RCB_REG(SPI_FREQ_WR_ERA));
+ fdod >>= 24;
+ fdod &= 7;
+
+ /* Set Software Sequence frequency to match */
+ clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod);
+}
+
+int arch_cpu_init(void)
+{
+ const void *blob = gd->fdt_blob;
+ struct pci_controller *hose;
+ int node;
+ int ret;
+
+ post_code(POST_CPU_INIT);
+ timer_set_base(rdtsc());
+
+ ret = x86_cpu_init_f();
+ if (ret)
+ return ret;
+
+ ret = pci_early_init_hose(&hose);
+ if (ret)
+ return ret;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC);
+ if (node < 0)
+ return -ENOENT;
+ ret = lpc_early_init(gd->fdt_blob, node, PCH_LPC_DEV);
+ if (ret)
+ return ret;
+
+ enable_spi_prefetch(hose, PCH_LPC_DEV);
+
+ /* This is already done in start.S, but let's do it in C */
+ enable_port80_on_lpc(hose, PCH_LPC_DEV);
+
+ /* already done in car.S */
+ if (false)
+ enable_rom_caching();
+
+ set_spi_speed();
+
+ /*
+ * We should do as little as possible before the serial console is
+ * up. Perhaps this should move to later. Our next lot of init
+ * happens in print_cpuinfo() when we have a console
+ */
+ ret = set_flex_ratio_to_tdp_nominal();
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int enable_smbus(void)
+{
+ pci_dev_t dev;
+ uint16_t value;
+
+ /* Set the SMBus device statically. */
+ dev = PCI_BDF(0x0, 0x1f, 0x3);
+
+ /* Check to make sure we've got the right device. */
+ value = pci_read_config16(dev, 0x0);
+ if (value != 0x8086) {
+ printf("SMBus controller not found\n");
+ return -ENOSYS;
+ }
+
+ /* Set SMBus I/O base. */
+ pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+ /* Set SMBus enable. */
+ pci_write_config8(dev, HOSTC, HST_EN);
+
+ /* Set SMBus I/O space enable. */
+ pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ /* Disable interrupt generation. */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Clear any lingering errors, so transactions can run. */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ debug("SMBus controller enabled\n");
+
+ return 0;
+}
+
+#define PCH_EHCI0_TEMP_BAR0 0xe8000000
+#define PCH_EHCI1_TEMP_BAR0 0xe8000400
+#define PCH_XHCI_TEMP_BAR0 0xe8001000
+
+/*
+ * Setup USB controller MMIO BAR to prevent the reference code from
+ * resetting the controller.
+ *
+ * The BAR will be re-assigned during device enumeration so these are only
+ * temporary.
+ *
+ * This is used to speed up the resume path.
+ */
+static void enable_usb_bar(void)
+{
+ pci_dev_t usb0 = PCH_EHCI1_DEV;
+ pci_dev_t usb1 = PCH_EHCI2_DEV;
+ pci_dev_t usb3 = PCH_XHCI_DEV;
+ u32 cmd;
+
+ /* USB Controller 1 */
+ pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI0_TEMP_BAR0);
+ cmd = pci_read_config32(usb0, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb0, PCI_COMMAND, cmd);
+
+ /* USB Controller 1 */
+ pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = pci_read_config32(usb1, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb1, PCI_COMMAND, cmd);
+
+ /* USB3 Controller */
+ pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+ PCH_XHCI_TEMP_BAR0);
+ cmd = pci_read_config32(usb3, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb3, PCI_COMMAND, cmd);
+}
+
+static int report_bist_failure(void)
+{
+ if (gd->arch.bist != 0) {
+ printf("BIST failed: %08x\n", gd->arch.bist);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+int print_cpuinfo(void)
+{
+ enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE;
+ char processor_name[CPU_MAX_NAME_LEN];
+ const char *name;
+ uint32_t pm1_cnt;
+ uint16_t pm1_sts;
+ int ret;
+
+ /* Halt if there was a built in self test failure */
+ ret = report_bist_failure();
+ if (ret)
+ return ret;
+
+ enable_lapic();
+
+ ret = microcode_update_intel();
+ if (ret && ret != -ENOENT && ret != -EEXIST)
+ return ret;
+
+ /* Enable upper 128bytes of CMOS */
+ writel(1 << 2, RCB_REG(RC));
+
+ /* TODO: cmos_post_init() */
+ if (readl(MCHBAR_REG(SSKPD)) == 0xCAFE) {
+ debug("soft reset detected\n");
+ boot_mode = PEI_BOOT_SOFT_RESET;
+
+ /* System is not happy after keyboard reset... */
+ debug("Issuing CF9 warm reset\n");
+ outb(0x6, 0xcf9);
+ cpu_hlt();
+ }
+
+ /* Early chipset init required before RAM init can work */
+ sandybridge_early_init(SANDYBRIDGE_MOBILE);
+
+ /* Check PM1_STS[15] to see if we are waking from Sx */
+ pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
+
+ /* Read PM1_CNT[12:10] to determine which Sx state */
+ pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
+
+ if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ debug("Resume from S3 detected.\n");
+ boot_mode = PEI_BOOT_RESUME;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
+#else
+ debug("Resume from S3 detected, but disabled.\n");
+#endif
+ } else {
+ /*
+ * TODO: An indication of life might be possible here (e.g.
+ * keyboard light)
+ */
+ }
+ post_code(POST_EARLY_INIT);
+
+ /* Enable SPD ROMs and DDR-III DRAM */
+ ret = enable_smbus();
+ if (ret)
+ return ret;
+
+ /* Prepare USB controller early in S3 resume */
+ if (boot_mode == PEI_BOOT_RESUME)
+ enable_usb_bar();
+
+ gd->arch.pei_boot_mode = boot_mode;
+
+ /* TODO: Move this to the board or driver */
+ pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+
+ /* Print processor name */
+ name = cpu_get_name(processor_name);
+ printf("CPU: %s\n", name);
+
+ post_code(POST_CPU_INFO);
+
+ return 0;
+}
--- /dev/null
+/*
+ * From Coreboot
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
+
+static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
+{
+ /* Setting up Southbridge. In the northbridge code. */
+ debug("Setting up static southbridge registers\n");
+ pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+
+ pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
+ pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
+
+ debug("Disabling watchdog reboot\n");
+ setbits_le32(RCB_REG(GCS), 1 >> 5); /* No reset */
+ outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */
+
+ /* Set up all hardcoded northbridge BARs */
+ debug("Setting up static registers\n");
+ pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
+ pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+ pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
+ pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+ /* 64MB - busses 0-63 */
+ pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+ pci_write_config32(pch_dev, PCIEXBAR + 4,
+ (0LL + DEFAULT_PCIEXBAR) >> 32);
+ pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
+ pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+
+ /* Set C0000-FFFFF to access RAM on both reads and writes */
+ pci_write_config8(pch_dev, PAM0, 0x30);
+ pci_write_config8(pch_dev, PAM1, 0x33);
+ pci_write_config8(pch_dev, PAM2, 0x33);
+ pci_write_config8(pch_dev, PAM3, 0x33);
+ pci_write_config8(pch_dev, PAM4, 0x33);
+ pci_write_config8(pch_dev, PAM5, 0x33);
+ pci_write_config8(pch_dev, PAM6, 0x33);
+}
+
+static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
+{
+ u32 reg32;
+ u16 reg16;
+ u8 reg8;
+
+ reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID);
+ switch (reg16) {
+ case 0x0102: /* GT1 Desktop */
+ case 0x0106: /* GT1 Mobile */
+ case 0x010a: /* GT1 Server */
+ case 0x0112: /* GT2 Desktop */
+ case 0x0116: /* GT2 Mobile */
+ case 0x0122: /* GT2 Desktop >=1.3GHz */
+ case 0x0126: /* GT2 Mobile >=1.3GHz */
+ case 0x0156: /* IvyBridge */
+ case 0x0166: /* IvyBridge */
+ break;
+ default:
+ debug("Graphics not supported by this CPU/chipset\n");
+ return;
+ }
+
+ debug("Initialising Graphics\n");
+
+ /* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
+ reg16 = pci_read_config16(pch_dev, GGC);
+ reg16 &= ~0x00f8;
+ reg16 |= 1 << 3;
+ /* Program GTT memory by setting GGC[9:8] = 2MB */
+ reg16 &= ~0x0300;
+ reg16 |= 2 << 8;
+ /* Enable VGA decode */
+ reg16 &= ~0x0002;
+ pci_write_config16(pch_dev, GGC, reg16);
+
+ /* Enable 256MB aperture */
+ reg8 = pci_read_config8(video_dev, MSAC);
+ reg8 &= ~0x06;
+ reg8 |= 0x02;
+ pci_write_config8(video_dev, MSAC, reg8);
+
+ /* Erratum workarounds */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ reg32 |= (1 << 9) | (1 << 10);
+ writel(reg32, MCHBAR_REG(0x5f00));
+
+ /* Enable SA Clock Gating */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ writel(reg32 | 1, MCHBAR_REG(0x5f00));
+
+ /* GPU RC6 workaround for sighting 366252 */
+ reg32 = readl(MCHBAR_REG(0x5d14));
+ reg32 |= (1 << 31);
+ writel(reg32, MCHBAR_REG(0x5d14));
+
+ /* VLW */
+ reg32 = readl(MCHBAR_REG(0x6120));
+ reg32 &= ~(1 << 0);
+ writel(reg32, MCHBAR_REG(0x6120));
+
+ reg32 = readl(MCHBAR_REG(0x5418));
+ reg32 |= (1 << 4) | (1 << 5);
+ writel(reg32, MCHBAR_REG(0x5418));
+}
+
+void sandybridge_early_init(int chipset_type)
+{
+ pci_dev_t pch_dev = PCH_DEV;
+ pci_dev_t video_dev = PCH_VIDEO_DEV;
+ pci_dev_t lpc_dev = PCH_LPC_DEV;
+ u32 capid0_a;
+ u8 reg8;
+
+ /* Device ID Override Enable should be done very early */
+ capid0_a = pci_read_config32(pch_dev, 0xe4);
+ if (capid0_a & (1 << 10)) {
+ reg8 = pci_read_config8(pch_dev, 0xf3);
+ reg8 &= ~7; /* Clear 2:0 */
+
+ if (chipset_type == SANDYBRIDGE_MOBILE)
+ reg8 |= 1; /* Set bit 0 */
+
+ pci_write_config8(pch_dev, 0xf3, reg8);
+ }
+
+ /* Setup all BARs required for early PCIe and raminit */
+ sandybridge_setup_bars(pch_dev, lpc_dev);
+
+ /* Device Enable */
+ pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+
+ sandybridge_setup_graphics(pch_dev, video_dev);
+}
--- /dev/null
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/early_me.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pch.h>
+#include <asm/io.h>
+
+static const char *const me_ack_values[] = {
+ [ME_HFS_ACK_NO_DID] = "No DID Ack received",
+ [ME_HFS_ACK_RESET] = "Non-power cycle reset",
+ [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset",
+ [ME_HFS_ACK_S3] = "Go to S3",
+ [ME_HFS_ACK_S4] = "Go to S4",
+ [ME_HFS_ACK_S5] = "Go to S5",
+ [ME_HFS_ACK_GBL_RESET] = "Global Reset",
+ [ME_HFS_ACK_CONTINUE] = "Continue to boot"
+};
+
+static inline void pci_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword;
+
+ dword = pci_read_config32(PCH_ME_DEV, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+}
+
+static inline void pci_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ pci_write_config32(PCH_ME_DEV, offset, dword);
+}
+
+void intel_early_me_status(void)
+{
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(&gmes, PCI_ME_GMES);
+
+ intel_me_status(&hfs, &gmes);
+}
+
+int intel_early_me_init(void)
+{
+ int count;
+ struct me_uma uma;
+ struct me_hfs hfs;
+
+ debug("Intel ME early init\n");
+
+ /* Wait for ME UMA SIZE VALID bit to be set */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME is not ready!\n");
+ return -EBUSY;
+ }
+
+ /* Check for valid firmware */
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.fpt_bad) {
+ printf("WARNING: ME has bad firmware\n");
+ return -EBADF;
+ }
+
+ debug("Intel ME firmware is ready\n");
+
+ return 0;
+}
+
+int intel_early_me_uma_size(void)
+{
+ struct me_uma uma;
+
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid) {
+ debug("ME: Requested %uMB UMA\n", uma.size);
+ return uma.size;
+ }
+
+ debug("ME: Invalid UMA size\n");
+ return -EINVAL;
+}
+
+static inline void set_global_reset(int enable)
+{
+ u32 etr3;
+
+ etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+
+ /* Clear CF9 Without Resume Well Reset Enable */
+ etr3 &= ~ETR3_CWORWRE;
+
+ /* CF9GR indicates a Global Reset */
+ if (enable)
+ etr3 |= ETR3_CF9GR;
+ else
+ etr3 &= ~ETR3_CF9GR;
+
+ pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+}
+
+int intel_early_me_init_done(u8 status)
+{
+ u8 reset;
+ int count;
+ u32 mebase_l, mebase_h;
+ struct me_hfs hfs;
+ struct me_did did = {
+ .init_done = ME_INIT_DONE,
+ .status = status
+ };
+
+ /* MEBASE from MESEG_BASE[35:20] */
+ mebase_l = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
+ mebase_h = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+ mebase_h &= 0xf;
+ did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
+
+ /* Send message to ME */
+ debug("ME: Sending Init Done with status: %d, UMA base: 0x%04x\n",
+ status, did.uma_base);
+
+ pci_write_dword_ptr(&did, PCI_ME_H_GS);
+
+ /* Must wait for ME acknowledgement */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.bios_msg_ack)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME failed to respond\n");
+ return -1;
+ }
+
+ /* Return the requested BIOS action */
+ debug("ME: Requested BIOS Action: %s\n", me_ack_values[hfs.ack_data]);
+
+ /* Check status after acknowledgement */
+ intel_early_me_status();
+
+ reset = 0;
+ switch (hfs.ack_data) {
+ case ME_HFS_ACK_CONTINUE:
+ /* Continue to boot */
+ return 0;
+ case ME_HFS_ACK_RESET:
+ /* Non-power cycle reset */
+ set_global_reset(0);
+ reset = 0x06;
+ break;
+ case ME_HFS_ACK_PWR_CYCLE:
+ /* Power cycle reset */
+ set_global_reset(0);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_GBL_RESET:
+ /* Global reset */
+ set_global_reset(1);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_S3:
+ case ME_HFS_ACK_S4:
+ case ME_HFS_ACK_S5:
+ break;
+ }
+
+ /* Perform the requested reset */
+ if (reset) {
+ outb(reset, 0xcf9);
+ cpu_hlt();
+ }
+ return -1;
+}
--- /dev/null
+/*
+ * From coreboot southbridge/intel/bd82x6x/lpc.c
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+int lpc_early_init(const void *blob, int node, pci_dev_t dev)
+{
+ struct reg_info {
+ u32 base;
+ u32 size;
+ } values[4], *ptr;
+ int count;
+ int i;
+
+ count = fdtdec_get_int_array_count(blob, node, "gen-dec",
+ (u32 *)values, sizeof(values) / sizeof(u32));
+ if (count < 0)
+ return -EINVAL;
+
+ /* Set COM1/COM2 decode range */
+ pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+
+ /* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
+ pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+ GAMEL_LPC_EN | COMA_LPC_EN);
+
+ /* Write all registers but use 0 if we run out of data */
+ count = count * sizeof(u32) / sizeof(values[0]);
+ for (i = 0, ptr = values; i < ARRAY_SIZE(values); i++, ptr++) {
+ u32 reg = 0;
+
+ if (i < count)
+ reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
+ pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/me_status.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/arch/me.h>
+
+/* HFS1[3:0] Current Working State Values */
+static const char *const me_cws_values[] = {
+ [ME_HFS_CWS_RESET] = "Reset",
+ [ME_HFS_CWS_INIT] = "Initializing",
+ [ME_HFS_CWS_REC] = "Recovery",
+ [ME_HFS_CWS_NORMAL] = "Normal",
+ [ME_HFS_CWS_WAIT] = "Platform Disable Wait",
+ [ME_HFS_CWS_TRANS] = "OP State Transition",
+ [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In"
+};
+
+/* HFS1[8:6] Current Operation State Values */
+static const char *const me_opstate_values[] = {
+ [ME_HFS_STATE_PREBOOT] = "Preboot",
+ [ME_HFS_STATE_M0_UMA] = "M0 with UMA",
+ [ME_HFS_STATE_M3] = "M3 without UMA",
+ [ME_HFS_STATE_M0] = "M0 without UMA",
+ [ME_HFS_STATE_BRINGUP] = "Bring up",
+ [ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
+};
+
+/* HFS[19:16] Current Operation Mode Values */
+static const char *const me_opmode_values[] = {
+ [ME_HFS_MODE_NORMAL] = "Normal",
+ [ME_HFS_MODE_DEBUG] = "Debug",
+ [ME_HFS_MODE_DIS] = "Soft Temporary Disable",
+ [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
+ [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
+};
+
+/* HFS[15:12] Error Code Values */
+static const char *const me_error_values[] = {
+ [ME_HFS_ERROR_NONE] = "No Error",
+ [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
+ [ME_HFS_ERROR_IMAGE] = "Image Failure",
+ [ME_HFS_ERROR_DEBUG] = "Debug Failure"
+};
+
+/* GMES[31:28] ME Progress Code */
+static const char *const me_progress_values[] = {
+ [ME_GMES_PHASE_ROM] = "ROM Phase",
+ [ME_GMES_PHASE_BUP] = "BUP Phase",
+ [ME_GMES_PHASE_UKERNEL] = "uKernel Phase",
+ [ME_GMES_PHASE_POLICY] = "Policy Module",
+ [ME_GMES_PHASE_MODULE] = "Module Loading",
+ [ME_GMES_PHASE_UNKNOWN] = "Unknown",
+ [ME_GMES_PHASE_HOST] = "Host Communication"
+};
+
+/* GMES[27:24] Power Management Event */
+static const char *const me_pmevent_values[] = {
+ [0x00] = "Clean Moff->Mx wake",
+ [0x01] = "Moff->Mx wake after an error",
+ [0x02] = "Clean global reset",
+ [0x03] = "Global reset after an error",
+ [0x04] = "Clean Intel ME reset",
+ [0x05] = "Intel ME reset due to exception",
+ [0x06] = "Pseudo-global reset",
+ [0x07] = "S0/M0->Sx/M3",
+ [0x08] = "Sx/M3->S0/M0",
+ [0x09] = "Non-power cycle reset",
+ [0x0a] = "Power cycle reset through M3",
+ [0x0b] = "Power cycle reset through Moff",
+ [0x0c] = "Sx/Mx->Sx/Moff"
+};
+
+/* Progress Code 0 states */
+static const char *const me_progress_rom_values[] = {
+ [0x00] = "BEGIN",
+ [0x06] = "DISABLE"
+};
+
+/* Progress Code 1 states */
+static const char *const me_progress_bup_values[] = {
+ [0x00] = "Initialization starts",
+ [0x01] = "Disable the host wake event",
+ [0x04] = "Flow determination start process",
+ [0x08] = "Error reading/matching the VSCC table in the descriptor",
+ [0x0a] = "Check to see if straps say ME DISABLED",
+ [0x0b] = "Timeout waiting for PWROK",
+ [0x0d] = "Possibly handle BUP manufacturing override strap",
+ [0x11] = "Bringup in M3",
+ [0x12] = "Bringup in M0",
+ [0x13] = "Flow detection error",
+ [0x15] = "M3 clock switching error",
+ [0x18] = "M3 kernel load",
+ [0x1c] = "T34 missing - cannot program ICC",
+ [0x1f] = "Waiting for DID BIOS message",
+ [0x20] = "Waiting for DID BIOS message failure",
+ [0x21] = "DID reported an error",
+ [0x22] = "Enabling UMA",
+ [0x23] = "Enabling UMA error",
+ [0x24] = "Sending DID Ack to BIOS",
+ [0x25] = "Sending DID Ack to BIOS error",
+ [0x26] = "Switching clocks in M0",
+ [0x27] = "Switching clocks in M0 error",
+ [0x28] = "ME in temp disable",
+ [0x32] = "M0 kernel load",
+};
+
+/* Progress Code 3 states */
+static const char *const me_progress_policy_values[] = {
+ [0x00] = "Entery into Policy Module",
+ [0x03] = "Received S3 entry",
+ [0x04] = "Received S4 entry",
+ [0x05] = "Received S5 entry",
+ [0x06] = "Received UPD entry",
+ [0x07] = "Received PCR entry",
+ [0x08] = "Received NPCR entry",
+ [0x09] = "Received host wake",
+ [0x0a] = "Received AC<>DC switch",
+ [0x0b] = "Received DRAM Init Done",
+ [0x0c] = "VSCC Data not found for flash device",
+ [0x0d] = "VSCC Table is not valid",
+ [0x0e] = "Flash Partition Boundary is outside address space",
+ [0x0f] = "ME cannot access the chipset descriptor region",
+ [0x10] = "Required VSCC values for flash parts do not match",
+};
+
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes)
+{
+ /* Check Current States */
+ debug("ME: FW Partition Table : %s\n",
+ hfs->fpt_bad ? "BAD" : "OK");
+ debug("ME: Bringup Loader Failure : %s\n",
+ hfs->ft_bup_ld_flr ? "YES" : "NO");
+ debug("ME: Firmware Init Complete : %s\n",
+ hfs->fw_init_complete ? "YES" : "NO");
+ debug("ME: Manufacturing Mode : %s\n",
+ hfs->mfg_mode ? "YES" : "NO");
+ debug("ME: Boot Options Present : %s\n",
+ hfs->boot_options_present ? "YES" : "NO");
+ debug("ME: Update In Progress : %s\n",
+ hfs->update_in_progress ? "YES" : "NO");
+ debug("ME: Current Working State : %s\n",
+ me_cws_values[hfs->working_state]);
+ debug("ME: Current Operation State : %s\n",
+ me_opstate_values[hfs->operation_state]);
+ debug("ME: Current Operation Mode : %s\n",
+ me_opmode_values[hfs->operation_mode]);
+ debug("ME: Error Code : %s\n",
+ me_error_values[hfs->error_code]);
+ debug("ME: Progress Phase : %s\n",
+ me_progress_values[gmes->progress_code]);
+ debug("ME: Power Management Event : %s\n",
+ me_pmevent_values[gmes->current_pmevent]);
+
+ debug("ME: Progress Phase State : ");
+ switch (gmes->progress_code) {
+ case ME_GMES_PHASE_ROM: /* ROM Phase */
+ debug("%s", me_progress_rom_values[gmes->current_state]);
+ break;
+
+ case ME_GMES_PHASE_BUP: /* Bringup Phase */
+ if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) &&
+ me_progress_bup_values[gmes->current_state])
+ debug("%s",
+ me_progress_bup_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_POLICY: /* Policy Module Phase */
+ if (gmes->current_state <
+ ARRAY_SIZE(me_progress_policy_values) &&
+ me_progress_policy_values[gmes->current_state])
+ debug("%s",
+ me_progress_policy_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_HOST: /* Host Communication Phase */
+ if (!gmes->current_state)
+ debug("Host communication established");
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ default:
+ debug("Unknown 0x%02x", gmes->current_state);
+ }
+ debug("\n");
+}
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ * Copyright (C) 2000 Ronald G. Minnich
+ *
+ * Microcode update for Intel PIII and later CPUs
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <asm/cpu.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+/**
+ * struct microcode_update - standard microcode header from Intel
+ *
+ * We read this information out of the device tree and use it to determine
+ * whether the update is applicable or not. We also use the same structure
+ * to read information from the CPU.
+ */
+struct microcode_update {
+ uint header_version;
+ uint update_revision;
+ uint date_code;
+ uint processor_signature;
+ uint checksum;
+ uint loader_revision;
+ uint processor_flags;
+ const void *data;
+ int size;
+};
+
+static int microcode_decode_node(const void *blob, int node,
+ struct microcode_update *update)
+{
+ update->data = fdt_getprop(blob, node, "data", &update->size);
+ if (!update->data)
+ return -EINVAL;
+
+ update->header_version = fdtdec_get_int(blob, node,
+ "intel,header-version", 0);
+ update->update_revision = fdtdec_get_int(blob, node,
+ "intel,update-revision", 0);
+ update->date_code = fdtdec_get_int(blob, node,
+ "intel,date-code", 0);
+ update->processor_signature = fdtdec_get_int(blob, node,
+ "intel.processor-signature", 0);
+ update->checksum = fdtdec_get_int(blob, node, "intel,checksum", 0);
+ update->loader_revision = fdtdec_get_int(blob, node,
+ "loader-revision", 0);
+ update->processor_flags = fdtdec_get_int(blob, node,
+ "processor-flags", 0);
+
+ return 0;
+}
+
+static uint32_t microcode_read_rev(void)
+{
+ /*
+ * Some Intel CPUs can be very finicky about the CPUID sequence used.
+ * So this is implemented in assembly so that it works reliably.
+ */
+ uint32_t low, high;
+
+ asm volatile (
+ "xorl %%eax, %%eax\n"
+ "xorl %%edx, %%edx\n"
+ "movl $0x8b, %%ecx\n"
+ "wrmsr\n"
+ "movl $0x01, %%eax\n"
+ "cpuid\n"
+ "movl $0x8b, %%ecx\n"
+ "rdmsr\n"
+ : /* outputs */
+ "=a" (low), "=d" (high)
+ : /* inputs */
+ : /* clobbers */
+ "ebx", "ecx"
+ );
+
+ return high;
+}
+
+static void microcode_read_cpu(struct microcode_update *cpu)
+{
+ /* CPUID sets MSR 0x8B iff a microcode update has been loaded. */
+ unsigned int x86_model, x86_family;
+ struct cpuid_result result;
+ uint32_t low, high;
+
+ wrmsr(0x8b, 0, 0);
+ result = cpuid(1);
+ rdmsr(0x8b, low, cpu->update_revision);
+ x86_model = (result.eax >> 4) & 0x0f;
+ x86_family = (result.eax >> 8) & 0x0f;
+ cpu->processor_signature = result.eax;
+
+ cpu->processor_flags = 0;
+ if ((x86_model >= 5) || (x86_family > 6)) {
+ rdmsr(0x17, low, high);
+ cpu->processor_flags = 1 << ((high >> 18) & 7);
+ }
+ debug("microcode: sig=%#x pf=%#x revision=%#x\n",
+ cpu->processor_signature, cpu->processor_flags,
+ cpu->update_revision);
+}
+
+/* Get a microcode update from the device tree and apply it */
+int microcode_update_intel(void)
+{
+ struct microcode_update cpu, update;
+ const void *blob = gd->fdt_blob;
+ int count;
+ int node;
+ int ret;
+
+ microcode_read_cpu(&cpu);
+ node = 0;
+ count = 0;
+ do {
+ node = fdtdec_next_compatible(blob, node,
+ COMPAT_INTEL_MICROCODE);
+ if (node < 0) {
+ debug("%s: Found %d updates\n", __func__, count);
+ return count ? 0 : -ENOENT;
+ }
+
+ ret = microcode_decode_node(blob, node, &update);
+ if (ret) {
+ debug("%s: Unable to decode update: %d\n", __func__,
+ ret);
+ return ret;
+ }
+ if (update.processor_signature == cpu.processor_signature &&
+ (update.processor_flags & cpu.processor_flags)) {
+ debug("%s: Update already exists\n", __func__);
+ return -EEXIST;
+ }
+
+ wrmsr(0x79, (ulong)update.data, 0);
+ debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n",
+ microcode_read_rev(), update.date_code & 0xffff,
+ (update.date_code >> 24) & 0xff,
+ (update.date_code >> 16) & 0xff);
+ count++;
+ } while (1);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *table)
+{
+ u8 secondary;
+
+ hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
+ if (secondary != 0)
+ pci_hose_scan_bus(hose, secondary);
+}
+
+static struct pci_config_table pci_ivybridge_config_table[] = {
+ /* vendor, device, class, bus, dev, func */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge },
+ {}
+};
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+ hose->config_table = pci_ivybridge_config_table;
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_PREF_BUS,
+ CONFIG_PCI_PREF_PHYS,
+ CONFIG_PCI_PREF_SIZE,
+ PCI_REGION_PREFETCH);
+
+ hose->region_count = 3;
+}
--- /dev/null
+/*
+ * From Coreboot src/northbridge/intel/sandybridge/report_platform.c
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/cpu.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+static void report_cpu_info(void)
+{
+ char cpu_string[CPU_MAX_NAME_LEN], *cpu_name;
+ const char *mode[] = {"NOT ", ""};
+ struct cpuid_result cpuidr;
+ int vt, txt, aes;
+ u32 index;
+
+ index = 0x80000000;
+ cpuidr = cpuid(index);
+ if (cpuidr.eax < 0x80000004) {
+ strcpy(cpu_string, "Platform info not available");
+ cpu_name = cpu_string;
+ } else {
+ cpu_name = cpu_get_name(cpu_string);
+ }
+
+ cpuidr = cpuid(1);
+ debug("CPU id(%x): %s\n", cpuidr.eax, cpu_name);
+ aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0;
+ txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0;
+ vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0;
+ debug("AES %ssupported, TXT %ssupported, VT %ssupported\n",
+ mode[aes], mode[txt], mode[vt]);
+}
+
+/* The PCI id name match comes from Intel document 472178 */
+static struct {
+ u16 dev_id;
+ const char *dev_name;
+} pch_table[] = {
+ {0x1E41, "Desktop Sample"},
+ {0x1E42, "Mobile Sample"},
+ {0x1E43, "SFF Sample"},
+ {0x1E44, "Z77"},
+ {0x1E45, "H71"},
+ {0x1E46, "Z75"},
+ {0x1E47, "Q77"},
+ {0x1E48, "Q75"},
+ {0x1E49, "B75"},
+ {0x1E4A, "H77"},
+ {0x1E53, "C216"},
+ {0x1E55, "QM77"},
+ {0x1E56, "QS77"},
+ {0x1E58, "UM77"},
+ {0x1E57, "HM77"},
+ {0x1E59, "HM76"},
+ {0x1E5D, "HM75"},
+ {0x1E5E, "HM70"},
+ {0x1E5F, "NM70"},
+};
+
+static void report_pch_info(void)
+{
+ const char *pch_type = "Unknown";
+ int i;
+ u16 dev_id;
+ uint8_t rev_id;
+
+ dev_id = pci_read_config16(PCH_LPC_DEV, 2);
+ for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
+ if (pch_table[i].dev_id == dev_id) {
+ pch_type = pch_table[i].dev_name;
+ break;
+ }
+ }
+ rev_id = pci_read_config8(PCH_LPC_DEV, 8);
+ debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
+ rev_id);
+}
+
+void report_platform_info(void)
+{
+ report_cpu_info();
+ report_pch_info();
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * Portions from Coreboot mainboard/google/link/romstage.c
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/global_data.h>
+#include <asm/pci.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pei_data.h>
+#include <asm/arch/pch.h>
+#include <asm/post.h>
+#include <asm/arch/sandybridge.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uintptr_t dest_addr = 0;
+ struct memory_area *largest = NULL;
+ int i;
+
+ /* Find largest area of memory below 4GB */
+
+ for (i = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ if (!largest || area->size > largest->size)
+ largest = area;
+ }
+
+ /* If no suitable area was found, return an error. */
+ assert(largest);
+ if (!largest || largest->size < (2 << 20))
+ panic("No available memory found for relocation");
+
+ dest_addr = largest->start + largest->size;
+
+ return (ulong)dest_addr;
+}
+
+void dram_init_banksize(void)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ int num_banks;
+ int i;
+
+ for (i = 0, num_banks = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ gd->bd->bi_dram[num_banks].start = area->start;
+ gd->bd->bi_dram[num_banks].size = area->size;
+ num_banks++;
+ }
+}
+
+static const char *const ecc_decoder[] = {
+ "inactive",
+ "active on IO",
+ "disabled on IO",
+ "active"
+};
+
+/*
+ * Dump in the log memory controller configuration as read from the memory
+ * controller registers.
+ */
+static void report_memory_config(void)
+{
+ u32 addr_decoder_common, addr_decode_ch[2];
+ int i;
+
+ addr_decoder_common = readl(MCHBAR_REG(0x5000));
+ addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
+ addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
+
+ debug("memcfg DDR3 clock %d MHz\n",
+ (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
+ debug("memcfg channel assignment: A: %d, B % d, C % d\n",
+ addr_decoder_common & 3,
+ (addr_decoder_common >> 2) & 3,
+ (addr_decoder_common >> 4) & 3);
+
+ for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
+ u32 ch_conf = addr_decode_ch[i];
+ debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
+ debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
+ debug(" enhanced interleave mode %s\n",
+ ((ch_conf >> 22) & 1) ? "on" : "off");
+ debug(" rank interleave %s\n",
+ ((ch_conf >> 21) & 1) ? "on" : "off");
+ debug(" DIMMA %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 0) & 0xff) * 256,
+ ((ch_conf >> 19) & 1) ? 16 : 8,
+ ((ch_conf >> 17) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? "" : ", selected");
+ debug(" DIMMB %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 8) & 0xff) * 256,
+ ((ch_conf >> 20) & 1) ? 16 : 8,
+ ((ch_conf >> 18) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? ", selected" : "");
+ }
+}
+
+static void post_system_agent_init(struct pei_data *pei_data)
+{
+ /* If PCIe init is skipped, set the PEG clock gating */
+ if (!pei_data->pcie_init)
+ setbits_le32(MCHBAR_REG(0x7010), 1);
+}
+
+static asmlinkage void console_tx_byte(unsigned char byte)
+{
+#ifdef DEBUG
+ putc(byte);
+#endif
+}
+
+/**
+ * Find the PEI executable in the ROM and execute it.
+ *
+ * @param pei_data: configuration data for UEFI PEI reference code
+ */
+int sdram_initialise(struct pei_data *pei_data)
+{
+ unsigned version;
+ const char *data;
+ uint16_t done;
+ int ret;
+
+ report_platform_info();
+
+ /* Wait for ME to be ready */
+ ret = intel_early_me_init();
+ if (ret)
+ return ret;
+ ret = intel_early_me_uma_size();
+ if (ret < 0)
+ return ret;
+
+ debug("Starting UEFI PEI System Agent\n");
+
+ /* If MRC data is not found we cannot continue S3 resume. */
+ if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
+ debug("Giving up in sdram_initialize: No MRC data\n");
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+ }
+
+ /* Pass console handler in pei_data */
+ pei_data->tx_byte = console_tx_byte;
+
+ debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
+
+ data = (char *)CONFIG_X86_MRC_START;
+ if (data) {
+ int rv;
+ int (*func)(struct pei_data *);
+
+ debug("Calling MRC at %p\n", data);
+ post_code(POST_PRE_MRC);
+ func = (int (*)(struct pei_data *))data;
+ rv = func(pei_data);
+ post_code(POST_MRC);
+ if (rv) {
+ switch (rv) {
+ case -1:
+ printf("PEI version mismatch.\n");
+ break;
+ case -2:
+ printf("Invalid memory frequency.\n");
+ break;
+ default:
+ printf("MRC returned %x.\n", rv);
+ }
+ printf("Nonzero MRC return value.\n");
+ return -EFAULT;
+ }
+ } else {
+ printf("UEFI PEI System Agent not found.\n");
+ return -ENOSYS;
+ }
+
+#if CONFIG_USBDEBUG
+ /* mrc.bin reconfigures USB, so reinit it to have debug */
+ early_usbdebug_init();
+#endif
+
+ version = readl(MCHBAR_REG(0x5034));
+ debug("System Agent Version %d.%d.%d Build %d\n",
+ version >> 24 , (version >> 16) & 0xff,
+ (version >> 8) & 0xff, version & 0xff);
+
+ /*
+ * Send ME init done for SandyBridge here. This is done inside the
+ * SystemAgent binary on IvyBridge
+ */
+ done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+ done &= BASE_REV_MASK;
+ if (BASE_REV_SNB == done)
+ intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
+ else
+ intel_early_me_status();
+
+ post_system_agent_init(pei_data);
+ report_memory_config();
+
+ return 0;
+}
+
+static int copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {41, 42, 43, 10, -1};
+ int spd_index;
+ const void *blob = gd->fdt_blob;
+ int node, spd_node;
+ int ret, i;
+
+ for (i = 0; ; i++) {
+ if (gpio_vector[i] == -1)
+ break;
+ ret = gpio_requestf(gpio_vector[i], "spd_id%d", i);
+ if (ret) {
+ debug("%s: Could not request gpio %d\n", __func__,
+ gpio_vector[i]);
+ return ret;
+ }
+ }
+ spd_index = gpio_get_values_as_int(gpio_vector);
+ debug("spd index %d\n", spd_index);
+ node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD);
+ if (node < 0) {
+ printf("SPD data not found.\n");
+ return -ENOENT;
+ }
+
+ for (spd_node = fdt_first_subnode(blob, node);
+ spd_node > 0;
+ spd_node = fdt_next_subnode(blob, spd_node)) {
+ const char *data;
+ int len;
+
+ if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
+ continue;
+ data = fdt_getprop(blob, spd_node, "data", &len);
+ if (len < sizeof(peid->spd_data[0])) {
+ printf("Missing SPD data\n");
+ return -EINVAL;
+ }
+
+ debug("Using SDRAM SPD data for '%s'\n",
+ fdt_get_name(blob, spd_node, NULL));
+ memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
+ break;
+ }
+
+ if (spd_node < 0) {
+ printf("No SPD data found for index %d\n", spd_index);
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+/**
+ * add_memory_area() - Add a new usable memory area to our list
+ *
+ * Note: @start and @end must not span the first 4GB boundary
+ *
+ * @info: Place to store memory info
+ * @start: Start of this memory area
+ * @end: End of this memory area + 1
+ */
+static int add_memory_area(struct memory_info *info,
+ uint64_t start, uint64_t end)
+{
+ struct memory_area *ptr;
+
+ if (info->num_areas == CONFIG_NR_DRAM_BANKS)
+ return -ENOSPC;
+
+ ptr = &info->area[info->num_areas];
+ ptr->start = start;
+ ptr->size = end - start;
+ info->total_memory += ptr->size;
+ if (ptr->start < (1ULL << 32))
+ info->total_32bit_memory += ptr->size;
+ debug("%d: memory %llx size %llx, total now %llx / %llx\n",
+ info->num_areas, ptr->start, ptr->size,
+ info->total_32bit_memory, info->total_memory);
+ info->num_areas++;
+
+ return 0;
+}
+
+/**
+ * sdram_find() - Find available memory
+ *
+ * This is a bit complicated since on x86 there are system memory holes all
+ * over the place. We create a list of available memory blocks
+ */
+static int sdram_find(pci_dev_t dev)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uint32_t tseg_base, uma_size, tolud;
+ uint64_t tom, me_base, touud;
+ uint64_t uma_memory_base = 0;
+ uint64_t uma_memory_size;
+ unsigned long long tomk;
+ uint16_t ggc;
+
+ /* Total Memory 2GB example:
+ *
+ * 00000000 0000MB-1992MB 1992MB RAM (writeback)
+ * 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
+ * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
+ * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
+ * 7f200000 2034MB TOLUD
+ * 7f800000 2040MB MEBASE
+ * 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
+ * 80000000 2048MB TOM
+ * 100000000 4096MB-4102MB 6MB RAM (writeback)
+ *
+ * Total Memory 4GB example:
+ *
+ * 00000000 0000MB-2768MB 2768MB RAM (writeback)
+ * ad000000 2768MB-2776MB 8MB TSEG (SMRR)
+ * ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
+ * ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
+ * afa00000 2810MB TOLUD
+ * ff800000 4088MB MEBASE
+ * ff800000 4088MB-4096MB 8MB ME UMA (uncached)
+ * 100000000 4096MB TOM
+ * 100000000 4096MB-5374MB 1278MB RAM (writeback)
+ * 14fe00000 5368MB TOUUD
+ */
+
+ /* Top of Upper Usable DRAM, including remap */
+ touud = pci_read_config32(dev, TOUUD+4);
+ touud <<= 32;
+ touud |= pci_read_config32(dev, TOUUD);
+
+ /* Top of Lower Usable DRAM */
+ tolud = pci_read_config32(dev, TOLUD);
+
+ /* Top of Memory - does not account for any UMA */
+ tom = pci_read_config32(dev, 0xa4);
+ tom <<= 32;
+ tom |= pci_read_config32(dev, 0xa0);
+
+ debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
+
+ /* ME UMA needs excluding if total memory <4GB */
+ me_base = pci_read_config32(dev, 0x74);
+ me_base <<= 32;
+ me_base |= pci_read_config32(dev, 0x70);
+
+ debug("MEBASE %llx\n", me_base);
+
+ /* TODO: Get rid of all this shifting by 10 bits */
+ tomk = tolud >> 10;
+ if (me_base == tolud) {
+ /* ME is from MEBASE-TOM */
+ uma_size = (tom - me_base) >> 10;
+ /* Increment TOLUD to account for ME as RAM */
+ tolud += uma_size << 10;
+ /* UMA starts at old TOLUD */
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size = uma_size * 1024ULL;
+ debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
+ }
+
+ /* Graphics memory comes next */
+ ggc = pci_read_config16(dev, GGC);
+ if (!(ggc & 2)) {
+ debug("IGD decoded, subtracting ");
+
+ /* Graphics memory */
+ uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
+ debug("%uM UMA", uma_size >> 10);
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+
+ /* GTT Graphics Stolen Memory Size (GGMS) */
+ uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug(" and %uM GTT\n", uma_size >> 10);
+ }
+
+ /* Calculate TSEG size from its base which must be below GTT */
+ tseg_base = pci_read_config32(dev, 0xb8);
+ uma_size = (uma_memory_base - tseg_base) >> 10;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
+
+ debug("Available memory below 4GB: %lluM\n", tomk >> 10);
+
+ /* Report the memory regions */
+ add_memory_area(info, 1 << 20, 2 << 28);
+ add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
+ add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
+ add_memory_area(info, 1ULL << 32, touud);
+ /*
+ * If >= 4GB installed then memory from TOLUD to 4GB
+ * is remapped above TOM, TOUUD will account for both
+ */
+ if (touud > (1ULL << 32ULL)) {
+ debug("Available memory above 4GB: %lluM\n",
+ (touud >> 20) - 4096);
+ }
+
+ return 0;
+}
+
+static void rcba_config(void)
+{
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P3IP WLAN INTA -> PIRQB
+ * D29IP_E1P EHCI1 INTA -> PIRQD
+ * D26IP_E2P EHCI2 INTA -> PIRQF
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQH
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQA (MSI)
+ *
+ * TRACKPAD -> PIRQE (Edge Triggered)
+ * TOUCHSCREEN -> PIRQG (Edge Triggered)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
+ writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
+ writel(INTA << D29IP_E1P, RCB_REG(D29IP));
+ writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
+ writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
+ writel(INTA << D26IP_E2P, RCB_REG(D26IP));
+ writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
+ writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
+
+ /* Device interrupt route registers */
+ writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
+ writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
+ writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
+ writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
+ writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
+
+ /* Enable IOAPIC (generic) */
+ writew(0x0100, RCB_REG(OIC));
+ /* PCH BWG says to read back the IOAPIC enable register */
+ (void)readw(RCB_REG(OIC));
+
+ /* Disable unused devices (board specific) */
+ setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
+}
+
+int dram_init(void)
+{
+ struct pei_data pei_data __aligned(8) = {
+ .pei_version = PEI_VERSION,
+ .mchbar = DEFAULT_MCHBAR,
+ .dmibar = DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = CONFIG_HPET_ADDRESS,
+ .rcba = DEFAULT_RCBABASE,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .thermalbase = 0xfed08000,
+ .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
+ .ec_present = 1,
+ .ddr3lv_support = 1,
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_port_config = {
+ /*
+ * Empty and onboard Ports 0-7, set to un-used pin
+ * OC3
+ */
+ { 0, 3, 0x0000 }, /* P0= Empty */
+ { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
+ { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
+ { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
+ { 0, 3, 0x0000 }, /* P4= Empty */
+ { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
+ { 0, 3, 0x0000 }, /* P6= Empty */
+ { 0, 3, 0x0000 }, /* P7= Empty */
+ /*
+ * Empty and onboard Ports 8-13, set to un-used pin
+ * OC4
+ */
+ { 1, 4, 0x0040 }, /* P8= Camera (no OC) */
+ { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
+ { 0, 4, 0x0000 }, /* P10= Empty */
+ { 0, 4, 0x0000 }, /* P11= Empty */
+ { 0, 4, 0x0000 }, /* P12= Empty */
+ { 0, 4, 0x0000 }, /* P13= Empty */
+ },
+ };
+ pci_dev_t dev = PCI_BDF(0, 0, 0);
+ int ret;
+
+ debug("Boot mode %d\n", gd->arch.pei_boot_mode);
+ debug("mcr_input %p\n", pei_data.mrc_input);
+ pei_data.boot_mode = gd->arch.pei_boot_mode;
+ ret = copy_spd(&pei_data);
+ if (!ret)
+ ret = sdram_initialise(&pei_data);
+ if (ret)
+ return ret;
+
+ rcba_config();
+ quick_ram_check();
+
+ writew(0xCAFE, MCHBAR_REG(SSKPD));
+
+ post_code(POST_DRAM);
+
+ ret = sdram_find(dev);
+ if (ret)
+ return ret;
+
+ gd->ram_size = gd->arch.meminfo.total_32bit_memory;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static struct pci_controller x86_hose;
+
+int pci_early_init_hose(struct pci_controller **hosep)
+{
+ struct pci_controller *hose;
+
+ hose = calloc(1, sizeof(struct pci_controller));
+ if (!hose)
+ return -ENOMEM;
+
+ board_pci_setup_hose(hose);
+ pci_setup_type1(hose);
+ gd->arch.hose = hose;
+ *hosep = hose;
+
+ return 0;
+}
+
+void pci_init_board(void)
+{
+ struct pci_controller *hose = &x86_hose;
+
+ /* Stop using the early hose */
+ gd->arch.hose = NULL;
+
+ board_pci_setup_hose(hose);
+ pci_setup_type1(hose);
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+static struct pci_controller *get_hose(void)
+{
+ if (gd->arch.hose)
+ return gd->arch.hose;
+
+ return pci_bus_to_hose(0);
+}
+
+unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
+{
+ uint8_t value;
+
+ pci_hose_read_config_byte(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
+{
+ uint16_t value;
+
+ pci_hose_read_config_word(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
+{
+ uint32_t value;
+
+ pci_hose_read_config_dword(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_byte(get_hose(), dev, where, value);
+}
+
+void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_word(get_hose(), dev, where, value);
+}
+
+void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_dword(get_hose(), dev, where, value);
+}
#include <config.h>
#include <version.h>
#include <asm/global_data.h>
+#include <asm/post.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <generated/generic-asm-offsets.h>
*/
movw $GD_FLG_COLD_BOOT, %bx
1:
+ /* Save BIST */
+ movl %eax, %ebp
/* Load the segement registes to match the gdt loaded in start16.S */
movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
jmp early_board_init
.globl early_board_init_ret
early_board_init_ret:
+ post_code(POST_START)
/* Initialise Cache-As-RAM */
jmp car_init
* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
* or fully initialised SDRAM - we really don't care which)
* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
+ * and early malloc area. The MRC requires some space at the top.
+ *
+ * Stack grows down from top of CAR. We have:
+ *
+ * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
+ * MRC area
+ * global_data
+ * x86 global descriptor table
+ * early malloc area
+ * stack
+ * bottom-> CONFIG_SYS_CAR_ADDR
*/
-
- /* Stack grows down from top of CAR */
- movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+ movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
+#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
+ subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
+#endif
/* Reserve space on stack for global data */
subl $GENERATED_GBL_DATA_SIZE, %esp
/* Align global data to 16-byte boundary */
andl $0xfffffff0, %esp
+ post_code(POST_START_STACK)
/* Zero the global data since it won't happen later */
xorl %eax, %eax
movl %esp, %edi
rep stosb
- /* Setup first parameter to setup_gdt */
+ /* Setup first parameter to setup_gdt, pointer to global_data */
movl %esp, %eax
/* Reserve space for global descriptor table */
subl $X86_GDT_SIZE, %esp
+ /* Align temporary global descriptor table to 16-byte boundary */
+ andl $0xfffffff0, %esp
+ movl %esp, %ecx
+
#if defined(CONFIG_SYS_MALLOC_F_LEN)
subl $CONFIG_SYS_MALLOC_F_LEN, %esp
movl %eax, %edx
addl $GD_MALLOC_BASE, %edx
movl %esp, (%edx)
#endif
-
- /* Align temporary global descriptor table to 16-byte boundary */
- andl $0xfffffff0, %esp
+ /* Store BIST */
+ movl %eax, %edx
+ addl $GD_BIST, %edx
+ movl %ebp, (%edx)
/* Set second parameter to setup_gdt */
- movl %esp, %edx
+ movl %ecx, %edx
/* Setup global descriptor table so gd->xyz works */
call setup_gdt
/* Set parameter to board_init_f() to boot flags */
+ post_code(POST_START_DONE)
xorl %eax, %eax
- movw %bx, %ax
/* Enter, U-boot! */
call board_init_f
.code16
.globl start16
start16:
+ /* Save BIST */
+ movl %eax, %ecx
+
/* Set the Cold Boot / Hard Reset flag */
movl $GD_FLG_COLD_BOOT, %ebx
- /*
- * First we let the BSP do some early initialization
- * this code have to map the flash to its final position
- */
- jmp board_init16
-.globl board_init16_ret
-board_init16_ret:
+ xorl %eax, %eax
+ movl %eax, %cr3 /* Invalidate TLB */
- /* Turn of cache (this might require a 486-class CPU) */
+ /* Turn off cache (this might require a 486-class CPU) */
movl %cr0, %eax
orl $(X86_CR0_NW | X86_CR0_CD), %eax
movl %eax, %cr0
/* Flush the prefetch queue */
jmp ff
ff:
- /* Finally jump to the 32bit initialization code */
+
+ /* Finally restore BIST and jump to the 32bit initialization code */
movw $code32start, %ax
movw %ax, %bp
+ movl %ecx, %eax
o32 cs ljmp *(%bp)
/* 48-bit far pointer */
dtb-y += link.dtb \
+ chromebook_link.dtb \
alex.dtb
targets += $(dtb-y)
--- /dev/null
+link.dts
\ No newline at end of file
gpioa {
compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
reg = <0 0x10>;
bank-name = "A";
};
gpiob {
compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
reg = <0x30 0x10>;
bank-name = "B";
};
gpioc {
compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
reg = <0x40 0x10>;
bank-name = "C";
};
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
+ spd {
+ compatible = "memory-spd";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ elpida_4Gb_1600_x16 {
+ reg = <0>;
+ data = [92 10 0b 03 04 19 02 02
+ 03 52 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ 20 08 3c 3c 01 40 83 81
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 11 42 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 02 fe 00
+ 11 52 00 00 00 07 7f 37
+ 45 42 4a 32 30 55 47 36
+ 45 42 55 30 2d 47 4e 2d
+ 46 20 30 20 02 fe 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00];
+ };
+ samsung_4Gb_1600_1.35v_x16 {
+ reg = <1>;
+ data = [92 11 0b 03 04 19 02 02
+ 03 11 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ f0 0a 3c 3c 01 40 83 01
+ 00 80 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 11 02 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 80 ce 01
+ 00 00 00 00 00 00 6a 04
+ 4d 34 37 31 42 35 36 37
+ 34 42 48 30 2d 59 4b 30
+ 20 20 00 00 80 ce 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00];
+ };
+ micron_4Gb_1600_1.35v_x16 {
+ reg = <2>;
+ data = [92 11 0b 03 04 19 02 02
+ 03 11 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ 20 08 3c 3c 01 40 83 05
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 01 02 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 80 2c 00
+ 00 00 00 00 00 00 ad 75
+ 34 4b 54 46 32 35 36 36
+ 34 48 5a 2d 31 47 36 45
+ 31 20 45 31 80 2c 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff];
+ };
+ };
+
spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,lpc";
#address-cells = <1>;
#size-cells = <1>;
+ gen-dec = <0x800 0xfc 0x900 0xfc>;
cros-ec@200 {
compatible = "google,cros-ec";
reg = <0x204 1 0x200 1 0x880 0x80>;
};
};
};
+
+ microcode {
+ update@0 {
+#include "m12206a7_00000028.dtsi"
+ };
+ update@1 {
+#include "m12306a9_00000017.dtsi"
+ };
+ };
+
};
--- /dev/null
+/*
+ * Copyright (c) <1995-2013>, Intel Corporation.
+ * All rights reserved.
+ *
+ * Redistribution. Redistribution and use in binary form, without modification, are
+ * permitted provided that the following conditions are met:
+ * .Redistributions must reproduce the above copyright notice and the following
+ * disclaimer in the documentation and/or other materials provided with the
+ * distribution.
+ * Neither the name of Intel Corporation nor the names of its suppliers may be used
+ * to endorse or promote products derived from this software without specific prior
+ * written permission.
+ * .No reverse engineering, decompilation, or disassembly of this software is
+ * permitted.
+ * ."Binary form" includes any format commonly used for electronic conveyance
+ * which is a reversible, bit-exact translation of binary representation to ASCII or
+ * ISO text, for example, "uuencode."
+ *
+ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *---
+ * This is a device tree fragment. Use #include to add these properties to a
+ * node.
+ */
+
+compatible = "intel,microcode";
+intel,header-version = <1>;
+intel,update-revision = <0x28>;
+intel,date-code = <0x04242012>;
+intel,processor-signature = <0x000206a7>;
+intel,checksum = <0xf3e9935d>;
+intel,loader-revision = <1>;
+intel,processor-flags = <0x12>;
+
+/* The 48-byte public header is omitted. */
+data = <
+ 0x00000000 0x000000a1 0x00020001 0x00000028
+ 0x00000000 0x00000000 0x20120423 0x000008f1
+ 0x00000001 0x000206a7 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000008f1 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x52b813ac 0xdb8994c7 0x70e9f6bb 0x9d6db2ff
+ 0xf4d70f5d 0x5b1eccf6 0xac59106f 0x0ae2e2c1
+ 0x1a7bbeb1 0x355a1d62 0x2e7eb594 0x09f8dea9
+ 0x432a49e4 0xbf520253 0xdafa4010 0x893a858a
+ 0x766e0efb 0xd91e196d 0x838bd2ef 0xe5146494
+ 0xd515f413 0x29704828 0xe85598b6 0xdcbe6c51
+ 0x88eabbfa 0xa1e8909f 0xd8931721 0x35386554
+ 0x089a78a7 0xd9914775 0xd4644748 0x1556a4dc
+ 0xf44448f6 0xd054d7db 0xf30f2b7d 0x5ae223d0
+ 0xcbbb48b0 0x5c8b0383 0x177de157 0x9c1e5f73
+ 0x2ec28289 0xd72a7b6c 0x823b6eb2 0x35e02171
+ 0xba8deae4 0x06f4d468 0x13dbafaa 0x72b419f1
+ 0x033385b5 0x05806920 0x4c6034cf 0x9bd117dc
+ 0x976e2d04 0x250330f0 0x7250b5e1 0x184980c2
+ 0x12a9d7d6 0x1bc808f9 0xae79994f 0xc6f87901
+ 0xc0e3132f 0x671491c5 0x236cad39 0x37889d9c
+ 0x67f7c3f3 0x964a6be5 0xbcced7da 0x57eeaa6e
+ 0x7bca1522 0x654fee4c 0x2a1ca5d9 0xa1803cf3
+ 0x00000011 0x8c316d2c 0x17603b7e 0x32e42981
+ 0xc26c1400 0xf0fbccb6 0xeab6b43a 0x11d456a5
+ 0x5b912d46 0x15195fe0 0x542f6db3 0x0b7f212e
+ 0x47718dd9 0x7c41b108 0x06c21111 0x4445d5ea
+ 0xb4fb8128 0xe07404a6 0x8d503da4 0x78fc7e44
+ 0xb9919656 0x9968c797 0x87f26ab0 0x23bb1af7
+ 0x1ec5d761 0x26f30d2c 0x7cdb747c 0xe4d42033
+ 0x8a5d4801 0x768aff57 0xbcfd5d11 0x7c853c2d
+ 0x231e6207 0x8b1988a6 0xd68fdb75 0x58dcb417
+ 0x44422ef9 0x2a186ebb 0x7d27e85f 0x36ac31f7
+ 0x1e487e77 0x2b0b8c37 0xd8ba682f 0x2cba791b
+ 0xe6d3dece 0x1b2c2a99 0x4e5decab 0xfbd313a3
+ 0xdbc78294 0x5a80cce7 0x2d8e0f0b 0xcf564f71
+ 0x073d1f37 0x25162870 0x96cdb85b 0x9c553048
+ 0x24eba740 0xfc0f352e 0x0c83be68 0x89b5076c
+ 0xc39c4355 0x6a4cf25c 0x2bbd2682 0xc524fdb9
+ 0x7ea19bae 0x191ad6f1 0xd3fbf3bf 0x21bf77fa
+ 0x8f77fec4 0x0f90f635 0xe55e165c 0x868d58c0
+ 0x966bc0ad 0x6c276364 0x9d8f7eff 0x4b7925d4
+ 0x8b2f9326 0x4ab7b47e 0x33a9087c 0xf31ab949
+ 0x69831dfb 0x4711a215 0x8128c1fa 0x8481c213
+ 0x7401b01b 0xfdcfdc50 0xd6b55266 0xae9b23ac
+ 0xfa2ad275 0xa225bb45 0x4dd720c4 0x760a20e6
+ 0x5f1223c9 0x2f334372 0x6e1dcdab 0xe8ee8638
+ 0x1c19ba8a 0xef9341c4 0x360aaa9d 0x90452ea9
+ 0x65852446 0xe9398fa3 0xbba6a631 0x1a3e90b9
+ 0xe2a73a56 0x6e8c0747 0x35c7c53d 0xcc1ac842
+ 0x183356af 0xb6e98608 0x987b43c2 0xa8a3cfd2
+ 0xc2c5fce0 0xcc3af64a 0xd6d3a291 0xe59ad1f5
+ 0x124ca513 0x9522b50a 0x25150477 0xa2eb5797
+ 0x7fc63626 0x648c48e3 0x9f5797ff 0x2307b84d
+ 0x980625a4 0xabc05983 0x24980807 0x773c4f99
+ 0x3407b872 0x07c3657a 0xa2cd9e48 0x49c1e6a8
+ 0xa881b84c 0xf804d72c 0xb5319d2a 0x3e39780f
+ 0x97518822 0x0acd54c2 0x0721a9ff 0x10e1d2fd
+ 0xa7b6db77 0x845b1a56 0xef00160e 0x6b41bfd5
+ 0xc994df0d 0xcf44a5ca 0x794b36a4 0xf9fdb127
+ 0x922a1366 0x822aa8a9 0x4b137bd5 0x5722a49f
+ 0x8933719a 0x17edc1a9 0x079d9538 0x21fae7d5
+ 0xe534fd73 0x9d3038d5 0x48c3a056 0x5b22d58a
+ 0x6f142866 0xf1d767cd 0xb51ad5a6 0x34a0ef85
+ 0x0111703e 0xca4b3a30 0xa0f3c34d 0x9d48775a
+ 0x3f2059f9 0xf2fe2c36 0x588861a9 0xed5bd9fe
+ 0x8231f7cb 0x8c115969 0x3f82ba00 0x21b3730c
+ 0xba757997 0x3ec0bb2c 0x16f11def 0x5d4356c6
+ 0xdc2e0bc2 0x58c1eb6e 0x313ede0c 0xb68fcc52
+ 0x84d3e1b5 0xcc6d9201 0x95046196 0x276b527b
+ 0x80a4a729 0xe782916d 0x5cf09e0b 0x98aaf9fa
+ 0x1de6dd43 0xab4f1962 0x49ece734 0x81455488
+ 0xc2597b61 0x5b22af85 0x646f7b94 0x09213a1f
+ 0x08edf7e4 0x963d343c 0x059ba888 0xb4e804ed
+ 0xe7cc826c 0xf87bafc7 0xeecaec10 0x8e60919c
+ 0xbf14c996 0xd3dcaee3 0xb8fa0b7e 0x81563c6e
+ 0x7f59a258 0x2f344446 0x374d8aa6 0x9b6de5c9
+ 0xbf992857 0xbc5b94fc 0x28adb080 0x17e41044
+ 0xb87b469e 0xda504d12 0xf21bef8b 0xce75c1e3
+ 0xdbd92c83 0x58bba0af 0x77b42977 0x506cfd75
+ 0x1139e875 0x6ce5fe43 0xc6a5d7b3 0x87f9e628
+ 0x7b5c500b 0x130066b3 0x789b611f 0xec8c1ba9
+ 0xb7e6872d 0xaf828cd6 0xc28d3316 0x2a91f6d0
+ 0xc725f063 0x065ac531 0x4f9ef4b8 0x2b9d927e
+ 0xaf54f3f9 0x7c924f72 0xda1d77ad 0xff00db67
+ 0xaf4f03c0 0xb4f4ee64 0x169e64e5 0x04653ac0
+ 0xed51cb70 0xfeaff0e5 0x51dbf346 0x072a2407
+ 0x23fb74f4 0x9a906eef 0x5d6fc3f0 0xbc3c374c
+ 0x1cf9f063 0x919015d9 0x5b3e9d07 0xd6209d8b
+ 0xa3710b3d 0x90ad23b8 0x420ceedc 0x58e8371f
+ 0x5d419d1f 0xb8acd13f 0x7d100d6d 0x210c10d1
+ 0xcd0a697e 0x5023db4b 0x33e6d8e7 0x44bbe6b4
+ 0x827e859f 0x6ca4cc81 0x661bb2c3 0x71209ee8
+ 0xb8c3ffaf 0xd1075f51 0xba1eae10 0x728b0a6a
+ 0xe4af7a2f 0xca9bcf2e 0xb249a631 0xdce6be47
+ 0x5c910321 0x425c3c27 0x33083e43 0xdea067ae
+ 0xea594a23 0x41b75c2c 0x3a401a95 0xd33cd88a
+ 0xc295cad0 0x67f48045 0x1dc9ad4c 0x4bc48864
+ 0x53991b6e 0x7aadde5f 0x2b0bf775 0x06ba5380
+ 0x9eb874be 0x2c4b967a 0x1bcc342f 0xe875001b
+ 0x15b5642d 0x5be99c9d 0xcb210ace 0x1b4924ad
+ 0x3793ed81 0x8b983114 0x3ec33981 0x75ec71e7
+ 0x8b5b7df3 0x834756f4 0x100fad01 0x70037fdf
+ 0x0cef9a36 0x3d9e3a2d 0x38b48efd 0xfc4034b6
+ 0xa32e29dd 0x388944bc 0xc1c15614 0x3877e9c7
+ 0xa5e733fa 0xa621bd53 0x4b651df6 0xce082970
+ 0x85f30d6f 0x729a5c87 0x31dd7ba9 0xdb495828
+ 0x7b12c698 0x953495c9 0x6b5f99e7 0x2cc42fa8
+ 0x697ac512 0x1be679de 0xc116d305 0x94a36606
+ 0x9e5e141e 0x874affed 0x58d40b0b 0x5e3cf5e5
+ 0x5d05e9a9 0x06840efc 0xd2f98b21 0xa1e83ab2
+ 0x4f726202 0xa6394535 0x62a02403 0x9f2167ec
+ 0x4f9fc77b 0x98073be4 0x2bc781fa 0xfc8e4c89
+ 0xc7179b97 0x692cf793 0x708ff7bb 0x12ecba93
+ 0xacd06e21 0x202bef76 0x03852241 0xe84e02a1
+ 0xf1f9ac8d 0xcee61aef 0x61a4f235 0xd22991eb
+ 0x67a81345 0x375a15c6 0xe8fae8a3 0xb4ff2b37
+ 0x339ee4ea 0x14ffadc3 0xf49340dd 0xf285e568
+ 0x00fc6970 0x369c52d1 0x4f55368f 0x3f4d75f1
+ 0x6a73b603 0x963c1f59 0x171e2bdc 0x72bac76b
+ 0x9e2e5c32 0x307f7c3f 0xd3b48637 0x3a917acf
+ 0xea52a65f 0xecd209fb 0xf0ad84bf 0xd4bdea70
+ 0xa2647b38 0xce040b49 0xc6d5f13d 0x5d942c52
+ 0xf8edc042 0x798fdefd 0x4b074246 0x1cb1873a
+ 0x6793c186 0x23b9c774 0x77bb0202 0xc519b3aa
+ 0xa30c09a2 0xe1f6669a 0xb7eddb8d 0x7aaa91d6
+ 0x076a3789 0x0ac47791 0x1e503404 0x44fe8c54
+ 0xf3cbbf49 0xd3234eef 0x0d898b3f 0xe854984b
+ 0xe3986de9 0x923a5c76 0x2ee9abca 0x1a9fedbe
+ 0xdf76dcd1 0xea07936b 0xcdaaf247 0xe62d98fa
+ 0xa99c7f7b 0x34fc84d4 0x03a35111 0xad5675c8
+ 0xcc64075b 0x408203f9 0x846e1f08 0xe934019e
+ 0x423d1223 0x2f04f9e3 0xee1dbf40 0x65edc60f
+ 0x097aa22f 0x7058a2b7 0x41c8a0a5 0xa68aa391
+ 0x0f345c40 0x667517e6 0x860838ba 0x6dae933b
+ 0x764d5919 0x6673fa0f 0xf0a5e97d 0x4262ebbe
+ 0x64b413f2 0xd2c4145a 0x0b2c11f3 0xfdfe9f93
+ 0x96c77107 0x1399fdda 0xf599f215 0xb504da5d
+ 0xf8a95268 0x9ed1ef87 0x9ae33cfb 0x3b21f1ef
+ 0xc6d447c2 0xe0694d4e 0x967febab 0xc13f631d
+ 0x8393bfba 0x37438788 0x1724194d 0x8e77a045
+ 0x20e2483c 0xb961c2fc 0x485cf593 0xb3462621
+ 0xcb2959b8 0x10307e19 0xf71fbbfd 0xdda641e1
+ 0x0daf5f66 0x56d85178 0x145f6749 0xebc46ed1
+ 0x5593c249 0x94561f51 0x534cc654 0xca7c8814
+ 0xb59a578c 0x40b2b614 0xeaf3437a 0x198d5b4e
+ 0xf245fa53 0xfb75e0b0 0xa363c46d 0xc43b5468
+ 0xdf036413 0xc59f5a36 0xd8ff4381 0xa3af3e36
+ 0x7af63462 0x414526d7 0x7bdc41c5 0xa416f1e7
+ 0x6987d9ad 0x472c5499 0x4f10ee37 0x47bb7ff7
+ 0xc7f2e621 0x820008f7 0x33a475db 0x91ff5d72
+ 0x0517401c 0x73d067c8 0xe417b69d 0xb86d9903
+ 0x1ac9a032 0x74bbf582 0x8b65596e 0x883be34c
+ 0x95dcc26f 0xe232c646 0xfae9c19f 0x35cb5273
+ 0x6a94d095 0xfff6ca91 0xb9c40eb5 0xd351dcac
+ 0xc90d464f 0x9b609642 0x15663b56 0x15f7f88d
+ 0x22499f60 0x417fd6c5 0x2dc36fe2 0x712bf66a
+ 0x22f1fba8 0x531b8092 0x40d269b6 0x1d227898
+ 0xeb6ff35b 0x2490ac31 0xc958ed65 0x3ce6ffb7
+ 0x9338a806 0x3beadfe2 0x1c361ac9 0x53d0e3b0
+ 0x91d46102 0x4d57045f 0xb5c8afb3 0xfd2c9e7d
+ 0x3d578410 0x2adb9406 0x10df7459 0x90abccfb
+ 0xe3f217ed 0xef5f4e09 0x74925ce4 0x169b5879
+ 0xfeff4ad5 0xb300dd1d 0xc96022ba 0x72da501b
+ 0x1e694296 0x9efa33cb 0x0dc3ee6c 0x0ac4e7ea
+ 0x73041130 0xf0e6a295 0xc46bdb6a 0x6a927044
+ 0xd217ceca 0x0b744007 0xd5a2bafb 0x4220cd92
+ 0x70d3352a 0x5ee4f661 0xfa07e5c0 0x155542d9
+ 0x4a39fba0 0xcec0552d 0x30c1d8ef 0xbef9d21e
+ 0x183879aa 0x5b3f30a8 0x54a06db4 0xef876e4e
+ 0x5e823680 0x53e2a353 0xc9aa4112 0x13a56ee5
+ 0x848859fd 0x0ba2b801 0xec15260f 0x7bb22672
+ 0x1a097332 0xb141339f 0x752a67d9 0xdae373f3
+ 0x3c8cfd49 0x2dfaf2a9 0x95820c6c 0x956b39a2
+ 0x1ca0d24e 0x1312b978 0x7280e1bd 0xa7a7c2ff
+ 0x0b48e987 0xb6083e55 0x4b4b82f4 0x9c6104ad
+ 0xcb93beca 0xe1c34035 0x34de740d 0xbb151baa
+ 0x71f5942f 0x1eaac228 0x0c68331b 0x3d2a1dd0
+ 0xe7a3d41a 0x7253acae 0xfd4de230 0x79988d80
+ 0x4468f19b 0xac4440fd 0x6e8a6ef3 0x5736adf8
+ 0xded67716 0x1f1d5a4b 0x96c5f451 0x85bae181
+ 0x1293ab28 0xc2ba53c2 0x729ff4cf 0x60218df8
+ 0xc2870138 0x6127d844 0x89604e9e 0xd2b9ad4e
+ 0x4f6ded9f 0xdd263849 0x1633bd92 0x64b03a24
+ 0x96dabd4d 0x6e85d235 0x1ab69ad0 0x9aa80454
+ 0x6b9041e0 0x106c7e9a 0x8f54812f 0xa274efe4
+ 0xe45d6695 0xf3aa7bd3 0x6a5a2a63 0xe36f3525
+ 0x6238fa4b 0x7d6cb06f 0x16d3b4a2 0xf3b04822
+ 0x638f1a60 0x0e1875fa 0x1c0292b9 0x6b519ea4
+ 0x9faba37b 0x209341ec 0x83c9061f 0x3387dfe8
+ 0xc7f12ceb 0x2bef45d7 0x8f8acb47 0x35d9741b
+ 0x7009f514 0xfd003802 0x6f9489c5 0xe2ea2504
+ 0x910e996a 0xcc81d016 0x3280730d 0xdedfef59
+ 0x5a7357cc 0x8fe8dd39 0x15543fe5 0x976c4207
+ 0xe41cf62b 0x0ba6b4b5 0x5c3b7ced 0xa6c5b72b
+ 0x72ad3b4d 0xff143181 0x2b78a157 0x7fe231a5
+ 0x6ff0538a 0xe58ed1ac 0x81a311a5 0xefaa54b8
+ 0xf04a797e 0xce6e69c7 0xdc810726 0x7bab7be3
+ 0xdd5923e8 0x5a2413ed 0x31cef794 0x73dfd806
+ 0x1b9223c1 0x0c370882 0x04fa3b68 0x87c50bc1
+ 0x1d78c90f 0xf4e2cee6 0xebea941b 0x73e5838f
+ 0xca8d39a6 0xe004296b 0x28cf8a0e 0x7c73e7ef
+ 0x26a296c2 0x789d4c72 0xd1490265 0xd9a9e843
+ 0xf03504c3 0xfae6dffb 0x7a48f00d 0x51e369c8
+ 0xcb3eeee6 0x0625e936 0xe93d0d7d 0xfb15ba6b
+ 0xec5c76da 0x8fdf44f1 0xa036653a 0x5730c4a3
+ 0xe5bfe6dd 0x0b8c091f 0x3b51558c 0x403748f4
+ 0xf4007f86 0x952b5db6 0x5524d8ba 0x8046409a
+ 0xe3fc61a9 0x66f4ea56 0x5645150b 0xdb2bec15
+ 0x50672218 0x7f40e87d 0x2b8359f8 0x438787dc
+ 0x7f221597 0xf8b1590c 0x4f468251 0xff586d05
+ 0xb9195380 0x0ee09e0b 0x2fa7dbd9 0xd197b327
+ 0xa0dbad58 0xb485681f 0x5ef0937c 0x1e07ebb6
+ 0xcb49fe3f 0xc2427cd9 0x6c2c5298 0x4a2e171a
+ 0xa7f333a8 0xb3609ad6 0x94e374d6 0x0e1eb64d
+ 0x22c3367d 0xcdf89975 0x647aceef 0x16727c9c
+ 0xf476ae53 0x35a1212e 0x0db768b8 0xfff8b53d
+ 0xbd4fe45e 0xab28a5a3 0x59cec0af 0x28bcd1ef
+ 0x6f43ad69 0x2658a059 0x27aee0ec 0x4e8bbd15
+ 0xa9fdcf04 0xc9aa329f 0x687f010f 0x5c968a07
+ 0xb894e607 0x0e1cba22 0x2f00f203 0xe8e133ac
+ 0x494a4746 0xe8bdff9a 0xf69791a2 0x64179ce2
+ 0xbfd10dc6 0xc026f6d8 0x4871923a 0x8946b277
+ 0x609f49a4 0x6466df1b 0xd8c3c131 0x46ef0291
+ 0x0fdce8b6 0x2b9aedb7 0x225c4520 0x72b332cf
+ 0x4e220d47 0xf2f69c36 0x2c23fad9 0x57a2a918
+ 0xe017409c 0x490819af 0xf2121afd 0x951ff7ff
+ 0x40363fcf 0x5078b94e 0x9e4be775 0xee97ef16
+ 0xdb3a2390 0x17d42af9 0x96f56a51 0x1b4c2934
+ 0xc866315c 0x2b746f99 0x9a3b73f6 0xa1e081fc
+ 0xa9d07ebd 0xa6359fae 0xdf50d099 0x55304e01
+ 0xfe5aaa81 0x1e74267d 0x38b1d2d7 0x8633e9af
+ 0x99b013df 0x3aa05831 0x86279736 0xd2b464e0
+ 0xdf036a9f 0xe8162915 0x876c0d4f 0x4beb7d0e
+ 0xfec9b170 0x46bc9df4 0x46cb88fa 0x0cb5904d
+ 0x2e2961cf 0x7ea5dc1a 0x60670df2 0xf935ca32
+ 0x67e6777b 0x8bacc97a 0x5cd07248 0x32e483e6
+ 0xfdf09b0d 0xca57150b 0x3f432d09 0xdea2d7db
+ 0x9f6a2954 0x6f07dff3 0x4133f394 0x60272f97
+ 0x1b98c9ec 0x2ab648d9 0xb5df14a8 0x0d2c38f2
+ 0x5dfde2c4 0x7cb43ca3 0x8d0c6c01 0xe80ea41e
+ 0x5f58b71e 0x4ca9fef2 0xabd201a4 0x50905c08
+ 0xca8ba387 0x5592922b 0xfa4e05f5 0xceb64b14
+ 0x0845c5bd 0x518d369b 0x727e570c 0x1daaab31
+ 0x801e8b9c 0xec6568f3 0xd4c3760f 0x40a78d22
+ 0x38af58b5 0xc406a76e 0x8c3a7779 0x18272c42
+ 0x45cf7b70 0xa6f3c0f3 0x88021e41 0xda662504
+ 0xe97aa709 0xe93bafe0 0x8862ed5f 0x35bc8268
+ 0xf5a41551 0x3dd3bb21 0x1af0cf11 0x08fe1ad7
+ 0x53ecae41 0x01a4a8ae 0xfed636b7 0xf09323e6
+ 0x73b9b253 0x7ebd7ce2 0x7074b4de 0x21c719b2
+ 0x50982743 0xd23cfd27 0x136a1f4a 0x23260f6e
+ 0xfad89dcd 0x57586681 0xadc4fba5 0xad0f71b8
+ 0x91a3f188 0x20d62385 0xfecda9cb 0x33d67776
+ 0x2abb0e6c 0x0ad16087 0x486332da 0x2928d342
+ 0xf6d1b174 0x5e133a4e 0x72fc0ad4 0x940578b8
+ 0x320a42b1 0x9cbda7d4 0xf2a36135 0x00ab8de3
+ 0x5bad9000 0x5778e633 0x3952763d 0xe0e58583
+ 0xdfb0bf19 0xb11914b6 0xa67da7a1 0x8d9a9f81
+ 0x638cbcf7 0x83bf931d 0x8703b0dd 0xcab30fa4
+ 0xd6db2ee6 0x5cc2e5ac 0x717e636b 0xfdcbc760
+ 0x563b3b25 0x0e4df458 0x9efb8fa7 0x95aaa7a1
+ 0xf05b6680 0x5e237e59 0xc884018a 0x177b5a30
+ 0x3ea2c9bc 0xd0325ee6 0xb1dae51b 0x812ee29d
+ 0x6d58db21 0xb787fa68 0xfd092294 0x09683dd3
+ 0xfe0d6405 0xfdd99aad 0x78744a59 0x936738e6
+ 0x6ad6cba7 0x370f7f8f 0xd208c214 0x12239384
+ 0xbe71f0e7 0xfc0ef264 0xc04e4a49 0x354f9cf3
+ 0xf5d7572c 0x07839ad0 0x834a003d 0x23ba26e2
+ 0xf4049ecf 0x5ff402b2 0xff9d6769 0x074ebe6d
+ 0xdc829da1 0xc3d7697d 0x973efe4f 0xfc2a9165
+ 0x126dc518 0x0b824ca4 0xc438fb70 0xb7b0ee00
+ 0xbe56afd9 0xa3d8defd 0x971455ae 0xc11ffde7
+ 0x346e619a 0xb41111a9 0x6004b62e 0x896c668d
+ 0x738e458c 0x351f9fdd 0xe771b2ba 0xad6d7464
+ 0x719b57c2 0x6f6a4611 0x8a676f2d 0xb8db1c43
+ 0x3f102641 0x51bffdbc 0xb7862565 0x5d8dd231
+ 0x7a79bd39 0xfa472894 0x0fd1d2ff 0x64cf589a
+ 0x38234d7a 0x5c9acefd 0x8eb0b9f8 0x761e1c95
+ 0xf2fe78fa 0xe06220d7 0xaf82a919 0xf4e196e1
+ 0xa17c8935 0x06d08d16 0x6bad807b 0xf410805d
+ 0x4ff2bce6 0x3297c81f 0x06e35353 0xbe1f5e1c
+ 0x65d1cb92 0x0dc69b2f 0xac55d597 0x636ff24c
+ 0xe2e4f2ba 0x63d64922 0x4b2e9f71 0xad2279ec
+ 0x5f0b5c0e 0xac688638 0x35613358 0xf5531360
+ 0x54a304e8 0x27ebfe65 0x977b5a3c 0x3dc5e10c
+ 0x73b32ee9 0x3a2c9454 0x30a149c6 0x31e5b55c
+ 0x2c10854f 0x745cd38a 0x2853a27b 0x6629e355
+ 0x0bb67e39 0x5469184d 0x694a9bb6 0x0a0ca25f
+ 0xa878c5de 0xee15fd46 0x23d92ff8 0x02328404
+ 0x1c9402b5 0xa46b6ce0 0xefc3e947 0x0e9312ad
+ 0x5830ae9e 0xe30e32f2 0x9db8ee81 0xe8aeebbc
+ 0x30675c83 0x447278c2 0xab2bad3b 0x08ba3d0c
+ 0x1124e681 0x3691242d 0x903c8d2b 0x3281c312
+ 0x22af690f 0xd69a150c 0x57622c5b 0x29313c73
+ 0x6ab2d7c6 0x39b06dad 0x6e1f9f81 0x03324986
+ 0x53a49093 0x7654eba3 0x2527245a 0x9af596fb
+ 0x818ffb3a 0xa3817173 0x6a2c4b80 0xfcc42ad5
+ 0xfb1bbb69 0x3a3720a2 0x90a89bcf 0xed80308d
+ 0x7753cb1c 0x1c2654a5 0xb01ee4af 0x81091e85
+ 0x9067b3f1 0x2e2b9b5e 0x9fb0c7d1 0x78fd9f69
+ 0x5771c46d 0xacdf498d 0xfd8b8e77 0x4c15fa61
+ 0x607120ce 0x18a298d8 0x73716420 0x65e5e06a
+ 0x18c53e04 0x35b84427 0xcd82b522 0x9a7d26bb
+ 0xd56b4b74 0x49b47fe8 0x63178dc6 0x0bac0f46
+ 0xc8b0755a 0x9bbaaf1f 0x18131d2b 0xcc019330
+ 0x0ceb89bb 0x8808c2d6 0xfb5bd86c 0x6c945b71
+ 0xdc911924 0x4ebb8d35 0x44e46d08 0xabfee615
+ 0xf456931f 0x7a244955 0x0bffce7d 0x5533ca5f
+ 0xb1b2c636 0x4f29075e 0x64012561 0x7aa5e7c7
+ 0x9c8a0666 0x9698782d 0x3481ad8f 0x21a55b19
+ 0x735aa45d 0x4245b9c4 0x0d4c3fdc 0xd1b10966
+ 0x7035fcde 0xc2257947 0x4a37271a 0x9da464a9
+ 0x228adbf8 0xbf309e03 0x096f560a 0xa2b8ca78
+ 0x427702cd 0x35a99cf5 0x99811758 0x6953db58
+ 0xec07533e 0xe95838b9 0x61c71654 0xc9cce595
+ 0x275af106 0xc8697af3 0xb3f27e58 0x411d8d30
+ 0xd0d90ecd 0x1503b9dc 0x76bf070e 0x49f89ef0
+ 0x7333b083 0x53f9c44b 0x8330c3a2 0x6a1119c3
+ 0xca555f2b 0x3d51fc6f 0xac7b3320 0xf8e42cdf
+ 0x053753fe 0xc122336f 0x94d289c6 0x088b5a64
+ 0xc3aac7f0 0x96a76344 0x2ff05828 0x9b4f2af3
+ 0x46de6a46 0x4ed29d98 0xe2ab7634 0x27481ddc
+ 0x300ca71f 0xce7ac539 0x88240e09 0xb1a14e78
+ 0x2addd4c5 0xb3a7f320 0xe91f549b 0x6881c45b
+ 0x0e381c47 0x1018feb4 0x64679650 0xe62281cc
+ 0x670ee6d4 0x0d226160 0x947b7f08 0xbc595a74
+ 0x2380c0b3 0xc0235785 0x63b41221 0x80b9cc31
+ 0x3231b4ae 0x33ed5718 0xf2c5c90f 0xdd3b03ea
+ 0x67dfca08 0x453e9d29 0xa2bdecbf 0x5e9a3181
+ 0xad17aea2 0xff0a8f13 0xdf946849 0xcfbbecb7
+ 0xb0a602d7 0xb1a820c6 0xfe7abbc8 0x7f70790d
+ 0xeb5f8863 0x266d3cc1 0xbd552a44 0xe19b1b3d
+ 0x856aefbd 0x51c11f1e 0xde661b7f 0x61c075d2
+ 0xd0f6a834 0xff1d0d37 0x6793d1c2 0x70c133a5
+ 0x20c4d2cf 0x8c80d4d3 0x61ebe382 0x788b74df
+ 0x11c56903 0x535889ba 0x0a9c7380 0xf9de2837
+ 0x09437fe7 0x1627c6b2 0xb943bdb8 0x69bc29b2
+ 0xee9795a4 0x83c992e0 0x95437918 0x8ce166a2
+ 0x56b56b66 0xb0680941 0x623d38a9 0x2add07ad
+ 0xe583ba09 0x96f6532a 0x3eff4696 0x2a8a6b0b
+ 0x905b913b 0xafc01673 0xe871e006 0x2c2339ad
+ 0x248438e5 0x96d83e53 0xb3a75d6b 0x2258cf63
+ 0x69ff39bf 0x95727173 0xc3ac09d5 0xea8d2c06
+ 0x0e7c0a4b 0x144fcade 0x28a9a5a3 0x97c11ae8
+ 0x89865e3d 0x1640cd32 0xe3e551f8 0x1f7ba770
+ 0x6d23fb31 0x11eceae3 0xc8ccb8ee 0x46dd0bb0
+ 0xd01a46ff 0x0504adf5 0xec6e170e 0x2e3d7ac5
+ 0x70f893ac 0xaf9963db 0x061e283c 0xf0ad248f
+ 0x2fe97e19 0x881fd340 0xc686c9d5 0x88ea8ba5
+ 0x92f05cd7 0xd6716148 0x6fc47fc3 0x2c51d9b9
+ 0xd50a7faf 0x4eccacd1 0x7c92f802 0xa63ffc83
+ 0x7cb0ab1d 0x4492e81b 0x7d906554 0x43306ba1
+ 0x73a5d57a 0xe57a05d6 0x6850b964 0xefed595c
+ 0x7754978f 0x629e8236 0x62ec4dde 0x247439ee
+ 0x8b9982fa 0x4eece5c2 0x48599175 0x0fdc752c
+ 0xecd87b12 0x94936c75 0x17a45ea1 0x80a899ac
+ 0x22a39ee7 0x745730b6 0x03ea4daf 0x4a7570d7
+ 0x307621fa 0x7322e0a7 0x3a8e0316 0x454e46f7
+ 0x08773750 0x156dcaad 0x5562bc06 0xa23a1ee3
+ 0x20435211 0x1d679ea0 0xb220e205 0x682cc1a6
+ 0xd64a71c7 0x3ca7f8e3 0x2e92f253 0xa7cfdd0b
+ 0xd62b4053 0xf5c5f641 0xbf72dde1 0xdcb716c1
+ 0xe2f7b05d 0xa03145ea 0xc09828d2 0x7dae7916
+ 0x6fb97c79 0xb3a85204 0x998a9c7b 0x5f42ba8c
+ 0xd9c628b3 0x6b17bacb 0xa889b716 0x450ff97d
+ 0xe9166f3c 0x2d20777b 0x82a003ae 0x2c7ae0aa
+ 0x6011a9fe 0xfeed34be 0x1328f67e 0xf61003a3
+ 0xfaecdf20 0xee18c81e 0x731a0302 0x11a39e60
+ 0x355d78dc 0x99088f2c 0xcf253759 0x97347603
+ 0x736f71f1 0x37e4b395 0x9cc74540 0xf7e39994
+ 0xf01c5f64 0xbec519f1 0xa79c1067 0x76000d5e
+ 0x1ac85b6e 0x51e5b7a3 0x62a97ddf 0x6f20096a
+ 0x2af51e77 0xea5554f6 0xb4e581da 0xc1ac4ba8
+ 0xc8f22bf7 0x9e254d3b 0xd7dd62f6 0x6461ae3e
+ 0x423e1f10 0xf143e7b9 0x18c73b04 0xa43de614
+ 0x2da8d02f 0x9befa706 0xc01dcd49 0xa278f1e0
+ 0xd85f3177 0x6b6679fd 0x1ccef04e 0x53af9252
+ 0x34d751db 0xc8d32c86 0x3d725097 0xa64ed581
+ 0xd090c42f 0x9e92bf3f 0x6f82b089 0xd42728eb
+ 0x3dd651e0 0x1985bc52 0x4b0f4159 0x0f99bd7f
+ 0xe2597023 0xca0cae4c 0xce48a894 0x7249dd88
+ 0x8e146632 0xb4be1d6c 0x790ae7e5 0x6747b657
+ 0x52143947 0xa2e42ed3 0xea359617 0x6ca01a11
+ 0x35c5e2dc 0xc97b78fc 0x5db6db2a 0x80fe3414
+ 0x27da19d4 0xd7431d04 0xa91e9110 0x7d8ecb23
+ 0x2508700a 0xc8c71ed9 0xd28835af 0x018c2887
+ 0x3d0a6fab 0x3e8523d6 0xd0688dee 0xe5c3865c
+ 0x838d72e4 0x6bb73a1d 0x497a59ca 0xf77c56de
+ 0x38ecb72e 0xa55e3565 0x04b12c92 0x1aec9997
+ 0x037c340a 0xef0d04c3 0x78f74bd6 0xdec9b9e8
+ 0xd95b61ea 0x5528e8f5 0x4ecd325c 0x88ffdc0b
+ 0xb337ac61 0x899d90e7 0xb5eeb978 0x8295d9ae
+ 0x1ed8978b 0xa8849eda 0x8633b4a3 0xb8c858b5
+ 0xbe3c4375 0x28b9e84e 0xb2a26def 0x22f8f66b
+ 0x3a4aed99 0x0c4914ea 0xad103249 0xba5a5eff
+ 0x8a052461 0x26938899 0x915c6ed7 0xe6268ad9
+ 0x246e8c74 0x75f3c196 0xc3e725d6 0x92e02549
+ 0x1f78a5cb 0xeada57e5 0x40f14906 0x0215e49c
+ 0x57c06bae 0xc1896b87 0x0cd40a63 0x60741d80
+ 0x11a69899 0x80fed942 0x0497e115 0x56697b55
+ 0xba89c3d4 0x27d6b7c5 0xddff87b0 0xd3b1ff2f
+ 0x3160e528 0x9cca1286 0x13b4fdf1 0x38cdd907
+ 0xb50c4597 0x4c151714 0x1cab86c7 0x23126a3e
+ 0xe26e9749 0x289a0d0e 0xc4004640 0x9d33928d
+ 0x33b691a2 0x15ed6e6b 0x6e773980 0xadd59678
+ 0x188ba49f 0x08da4c6d 0x6d150d0b 0x0c6c7b98
+ 0xc8e1df7e 0xb8b1e692 0x5e89fd35 0xcb253d24
+ 0xfc6ee27c 0x8013de3d 0x1d38012b 0xe50a8f7b
+ 0x7d410ff1 0xceee4e9f 0x0e8094b6 0xaa1a5f57
+ 0xb395a551 0xbd62b2ae 0x5d7b34c8 0xbd2d6195
+ 0x33af4109 0x0769ff18 0x9c6cc123 0x78ee6eb6
+ 0x412644e7 0x70e0c6f4 0xf45d8fc6 0x0435f5af
+ 0xd43622b7 0x27409d5b 0x6dd04e8f 0x9f02ecf5
+ 0xca415f7d 0xc9f439c2 0x7198e539 0x20476b75
+ 0x3cdd8dd8 0xce17fbb0 0xa5bc115e 0xb0ee52c1
+ 0x0b074cfa 0xd26d4f99 0x3b43320b 0x230b680b
+ 0x9908f2d2 0xcbcb1952 0xf45a2f53 0x7b4564c6
+ 0xcf2fd983 0x414fe4b2 0x55ea7f11 0x63e8117d
+ 0xe8954052 0x7c2ea344 0x97a02aaf 0x6ca874c3
+ 0x1ae5b4ee 0x41754eae 0x6954abe0 0x115ddcda
+ 0x9a27968b 0x32a53e65 0xffe47b2f 0x4fe7e5a7
+ 0x6016dedc 0xb3c0893e 0x9626776d 0x5ec773f9
+ 0x1104e01c 0x1473cfb3 0x43b2cedf 0x8ca9d119
+ 0x7f1bc844 0xd8bb7387 0xba90d2ef 0x2bb0dcf4
+ 0x2340f124 0xa5bd514c 0x50afab05 0x718f5ad5
+ 0x7c03fad9 0x71d00d2d 0x1c31fdc2 0x4a938809
+ 0x40945ded 0x437f2a0d 0x83c10d64 0xd224c6ab
+ 0x0cd44481 0xb0040966 0x27fd6e7f 0x6ff45d4c
+ 0xab057ad1 0x8fa4e5d4 0xac50270c 0x6e4926ca
+ 0xc5721498 0x2529b458 0x40ee2ad5 0xde5e21f2
+ 0xea8964ca 0x56766e60 0xdc3b8702 0xa93528d4
+ 0x28d7713d 0x42edf022 0x59774dd8 0x200ff942
+ 0xe7a4d769 0xd8c4ef5e 0xe177f715 0xe9d53cd6
+ 0xc11270bb 0xb25977e5 0xb80867b4 0xfb48468b
+ 0xdbf166a8 0x49700d85 0x0f85f98a 0xa7ca7a75
+ 0x109817ce 0xca243f19 0x8bed7688 0x9a1c8231
+ 0x94f0ce97 0xc36309ca 0x90ecac24 0x67e7e0de
+ 0x86b18d62 0x18c7b7a5 0x622f5d3a 0x47e1e067
+ 0xdc96b94d 0xe4a03beb 0x59d17692 0x040abc0d
+ 0x44a5ae50 0x3d3dab7d 0xc18dfd30 0x2802b9d9
+ 0x6818379f 0x56db41d7 0x97cbf039 0xe41d6a32
+ 0x64b5fb01 0x6506e0b4 0xd60a3234 0xdf3573d2
+ 0xac148579 0xe7f46ac0 0x05e1c763 0x904a5aa9
+ 0xc7ca1ee0 0xe0c3b047 0x5e36e1bc 0x447a9141
+ 0xe24654df 0x9853a49b 0x6a29cedb 0x022f00dc
+ 0x6df2a7a7 0x3636da02 0x72bb9c81 0x4f0e0918
+ 0xd649f4a5 0xbb0c81f9 0xc0ba93fd 0xc1b390f1
+ 0xda84e720 0x1aea0064 0xf3ee67e1 0xb874ef4a
+ 0x82467ce6 0x59abf506 0xafbf145a 0x9a4cf8a1
+ 0x17247c89 0xd8669398 0x1796eaf7 0xbc2d24a9
+ 0xcb486570 0x17a9db23 0x3e6504f0 0x08684517
+ 0x2723ab28 0x7081b814 0x8a265a04 0x697e6d8b
+ 0x69b146dc 0x6434c182 0x27ec8101 0x864405c5
+ 0xfff86c9e 0x3052d8a6 0x23d283db 0x492970e8
+ 0xbc6c64c3 0x46d8f98b 0xe16e7ff3 0x731e4f82
+ 0xbd26b1af 0x6b30e6c1 0xff192fce 0x097e0bba
+ 0x49df63a5 0x2fdc3f01 0x50aae053 0x60177b8f
+ 0x1949eb85 0xa46084ce 0x9658f694 0xcb951fbc
+ 0xc53806d9 0x63a17d30 0x3b3f86c2 0x8a37aa6c
+ 0xedf8fe5c 0x87aee1d3 0x8c680126 0xfd8b27a6
+ 0x231fa106 0x69358c25 0x4502c348 0xc107861c
+ 0x46280e70 0xcf6067ac 0xf6a04ff3 0x3e488677
+ 0x6f3fb4c1 0xeec1f758 0x560e1c48 0xb604c06b
+ 0x69e34b1e 0x8ef41dec 0x854cea22 0x726581d7
+ 0x55ea91f3 0x38ae4053 0x5ff7389d 0x6952cbf6
+ 0x09aa0fc1 0xcccb1d50 0x5c1a633a 0xde1eba46
+ 0x797212d8 0xa943fb3d 0x6063a1a8 0xbe68ef36
+ 0x6ba0d5ba 0x0dbe2061 0x47711712 0x62679807
+ 0x6f34009e 0xe6fe8f18 0x66a6a64b 0x3f80f472
+ 0xe953d5e0 0xbcd8196a 0x086faad0 0x49da7f16
+ 0x7f2199a5 0x55af4af2 0x085b4d38 0x22e634bd
+ 0x6cff0416 0x343466f4 0xd121a7a6 0x6caa3942
+ 0xe4f365a2 0xd832eb0c 0x616728e5 0xcca4c71a
+ 0x4010cdc2 0xd0f1d1cb 0x5e695f89 0x27719206
+ 0x0ec92854 0x76144a1b 0x49808021 0x12457a1b
+ 0xdde7aa5c 0x8f1a077f 0x110a4a5a 0xb3a5ad31
+ 0xaacebf8f 0x66ff7f33 0xa2340971 0xfb4c7e82
+ 0x8dd536d7 0xafd2021a 0x72aa9c6e 0x22df6952
+ 0x83c4b4fb 0xba515555 0x93eee8f0 0x22d0ed5a
+ 0xbec05586 0x83828f28 0xe0d7f930 0xac0f0199
+ 0xef6d76f9 0xf56ebdf8 0xf67323c9 0x8b805745
+ 0xce5902c0 0xfa2ce3da 0x10f836dd 0xe1ac6d97
+ 0xa0e415ea 0xbb7c32ad 0xc421f3b0 0x8166e898
+ 0x74e7a73c 0xf454b82a 0x631369b1 0xe30ed23f
+ 0xdaa1c75b 0xe7c9c6a7 0x5f33c375 0x99c05187
+ 0xf2d6e6ae 0xcd2045b8 0x92ff3009 0x15082015
+ 0xd1a1580e 0xdce25f9b 0x21984a75 0xa9be5388
+ 0x099a5372 0x3ab9bcfa 0xdb9069aa 0x49a99be6
+ 0x42a9ee0b 0xfe32d832 0x24e11ad3 0xd16f596b
+ 0xb95982cc 0x754ab1c8 0x42ffa128 0x539e823d
+ 0x28e0f976 0x262ddfc0 0x2a16e7ad 0x49b5acd9
+ 0x931f3def 0xdc419b84 0x8412cc3c 0x81056cd9
+ 0x91933e1f 0x57710b15 0xa55d2696 0x87d88724
+ 0xd4fedfdc 0xcc3825c6 0x397f382f 0x80f9b6ba
+ 0xcdd6d59f 0x24b984d8 0x8f1c5bcf 0x25bcef1d
+ 0x00dc603a 0x76fd94c2 0xa267a7dc 0xa6e90a6a
+ 0x5c5916d6 0x065a52cf 0xa28d3263 0x9b17b72d
+ 0xb8436b48 0x1b1c2391 0x1fda3395 0xa6cecbcb
+ 0xbc4ec502 0x1766b590 0x5945fbd6 0x6a124405
+ 0xf92d06f2 0xe24694b7 0xf6befd08 0x8266cf5c
+ 0x03ed670a 0x5f98be62 0xf27b7e2e 0x598cf22c
+ 0x2e855591 0x879815fb 0x153799c6 0x3820faf6
+ 0x3d3a2cc6 0xdbb6dece 0x1a3c46b2 0x5031bdda
+ 0x47894c03 0xe43661fe 0x7a6ee548 0xa5ca9779
+ 0x6aa9e105 0xbc8505a3 0xa03b860a 0x448faeb9
+ 0x367de4a9 0xc9779c7d 0x6535ad8c 0x4b7fcacc
+ 0xb2db5c10 0x0ab41ec6 0xe528ab90 0x5e6f03da
+ 0x98bc76d3 0xf38df42e 0xea59b039 0x1c2eaa28
+ 0xca30dac5 0xdb0eb8c6 0x60063860 0x18823f8d
+ 0x164e2f28 0x7cbbe080 0x70a12315 0xb08f44d9
+ 0x5fbb9453 0x4bc62738 0x9fa15ffc 0xe4033ca1
+ 0xc9dfbc13 0x58245d7d 0x588113aa 0x8f5a6ac8
+ 0x92588a60 0x26330c74 0xb2aaf0e3 0x24ada1ea
+ 0xa9e973ae 0x624b73e7 0x4ef961db 0x95ede155
+ 0xf2bb86ff 0x96bc79d9 0x95cd646b 0x1c3af453
+ 0xf60fa711 0x10905115 0x0e24b740 0x169bb227
+ 0x34cee6f0 0x990980db 0x18d8ace5 0xd4c87504
+ 0x29515d32 0x2e5d9c04 0x87dffa60 0x12e815d1
+ 0x021db8e9 0x2c5a42fd 0x6e3a1a13 0x88889ab5
+ 0x3bc915a6 0x608919c5 0xd310a970 0xea8f3218
+ 0x949f55bc 0x9ed7aadd 0x6d990157 0x181f1c2f
+ 0xa940df64 0xf3be8c39 0x7ca2e699 0x7b4f07f9
+ 0x89e83fee 0xe66b9493 0x54fc3d17 0xa63d2d46
+ 0xd5e835d5 0x910e0144 0xecf67025 0x1fa6a93a
+ 0xe692dbca 0x466af681 0xc2bc808c 0xbb4ebd60
+ 0x74d5c729 0xa283ad25 0x1e66fa23 0x6d372988
+ 0x753c9fcb 0x1742efdb 0x5b68cf15 0x372a0e33
+ 0xaa3a7ebd 0xa0e944d5 0x95d5cbb4 0x4fb6020b
+ 0xced927b0 0xb2afea78 0xd0646b72 0x1622fad4
+ 0x4672c6b6 0x736ae4f8 0x8d46a4db 0x0e6a432e
+ 0xe0a30a98 0x4c2bcf4f 0xd87acedd 0x19682d7a
+ 0xf97c025c 0x55d8feb3 0xbcd4d2ff 0x236c6f9f
+ 0x8ba0246d 0x42812f73 0x327636f5 0xc92cd30a
+ 0x08a69d9d 0xc735a946 0x82eca01f 0xda0753a0
+ 0x7077b1d1 0x17b05834 0xfa24bc02 0xf49f4473
+ 0x8f9ac6b4 0xa880c630 0xf7457b4d 0xd5f829e4
+ 0x25c49a99 0x1176a997 0xbb2d2009 0x61d35764
+ 0xa322c752 0x6ef3ae02 0x5faae6f8 0x9a52acf1
+ 0x19176f43 0x43843b07 0x14efc471 0xee474403
+ 0x319c4857 0xa19adcf0 0xc0a466e1 0x02db14ad
+ 0xb7f211f3 0x72aa6ca6 0x0eb9bffe 0x48a6d284
+ 0x9a93a2ee 0xac09fc5f 0x92a62c4f 0xd34f0271
+ 0xffb348c7 0xf229b6e2 0xc68ec1ca 0x19577dbc
+ 0x069a10bf 0xf64ac347 0xf7c3c848 0x81975294
+ 0x6376e550 0x93b53440 0x8bb17daa 0xc4c64c07
+ 0xcaeff293 0xd51497b0 0x33da3565 0xa73d5def
+ 0x4bf4dcde 0xfb470fcd 0xca7db864 0x7ef17022
+ 0x47567363 0xd8fb8d74 0xa68c3c72 0x8202e4f3
+ 0x75bf1798 0x16a70fd2 0xcc3b697f 0xab9a1075
+ 0x13f56ef3 0x269d0302 0xcb655a43 0xc9a4de88
+ 0xfb8363de 0xff40f36d 0xd2555489 0x647a7995
+ 0xfd8eda6e 0xa3958c9a 0x20e029b4 0xbed3e225
+ 0xa7df5f17 0x63bc3c1a 0x337ecc9d 0x6c329508
+ 0x786aa47e 0x1db5b093 0xc0acd73b 0xf9587237
+ 0x243e5d40 0xd3623c3a 0x338c4740 0xb672140e
+ 0x43640a9b 0xb7ef3f6a 0x44151074 0x749bcc46
+ 0xfa1f103b 0x0fefb19e 0x58855538 0x138ad276
+ 0x2641fd80 0x297d99d0 0xfaa63ba2 0x00b6f11a
+ 0x3793fb6b 0x124763a1 0x8b9419ac 0x56abf9eb
+ 0xdbf83419 0x43570571 0x37299cd8 0x8b201e62
+ 0xa4058fa5 0xb320e91b 0xbe7d40b7 0x4eca3b2d
+ 0x8519c155 0xf4b17021 0x9e4c572a 0xdc1f9e16
+ 0x39a589a3 0xa6cfc7a8 0x5b986910 0x64e150e7
+ 0x60b6f2c1 0x02bacd3f 0x2f3b5a5c 0xc6f453a8
+ 0x15a87a7e 0x76104a14 0xafa2ef63 0x2cd48dbe
+ 0x3c7abddc 0xd786ea5a 0x4f65867a 0x355cda38
+ 0x2ae03d9e 0x4f11f6be 0xfc0a0034 0xde4ea602
+ 0x21ff83ea 0x0f12d913 0xedf4da28 0xc96d8fd1
+ 0xd7e82c3c 0xfec63bdc 0x37a456d7 0x3007e18c
+ 0x091a47b6 0x82f1c641 0x82219cce 0x3e7e6993
+ 0x7b3a2115 0x0b8e1a02 0x40f88213 0xfa2f9c21
+ >;
--- /dev/null
+/*
+ * Copyright (c) <1995-2013>, Intel Corporation.
+ * All rights reserved.
+ *
+ * Redistribution. Redistribution and use in binary form, without modification, are
+ * permitted provided that the following conditions are met:
+ * .Redistributions must reproduce the above copyright notice and the following
+ * disclaimer in the documentation and/or other materials provided with the
+ * distribution.
+ * Neither the name of Intel Corporation nor the names of its suppliers may be used
+ * to endorse or promote products derived from this software without specific prior
+ * written permission.
+ * .No reverse engineering, decompilation, or disassembly of this software is
+ * permitted.
+ * ."Binary form" includes any format commonly used for electronic conveyance
+ * which is a reversible, bit-exact translation of binary representation to ASCII or
+ * ISO text, for example, "uuencode."
+ *
+ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *---
+ * This is a device tree fragment. Use #include to add these properties to a
+ * node.
+ */
+
+compatible = "intel,microcode";
+intel,header-version = <1>;
+intel,update-revision = <0x17>;
+intel,date-code = <0x01092013>;
+intel,processor-signature = <0x000306a9>;
+intel,checksum = <0x3546450b>;
+intel,loader-revision = <1>;
+intel,processor-flags = <0x12>;
+
+/* The 48-byte public header is omitted. */
+data = <
+ 0x00000000 0x000000a1 0x00020001 0x00000017
+ 0x00000000 0x00000000 0x20130107 0x00000a61
+ 0x00000001 0x000306a9 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x86c5b0d4 0xf6978804 0x7f4f5870 0x6319dc3c
+ 0xbb3b7d61 0x33cf9075 0xe8424658 0xf611a357
+ 0x5a3401db 0x42caecce 0xb4d8e75e 0xe6dbaf24
+ 0x7861b35f 0x6bd717bc 0x23b9b731 0x82ec1ac8
+ 0x20337b64 0x5396dbf1 0x59973bff 0x724bc7e9
+ 0x5237193b 0x0b8647c1 0x6a0d0e16 0xbf9ddb5b
+ 0xace2cc1c 0xad707638 0x056f102f 0xa37e60f8
+ 0x76255642 0xfb86e030 0xb8069a40 0x367795f1
+ 0x653fb05e 0xab7f14ad 0xb6e8a8e1 0xd2598d20
+ 0x2eba3f68 0x78b372f1 0xba8d13f8 0x1f1de861
+ 0x97f951d5 0x8097c728 0x27dbf904 0xb97906a8
+ 0xffe7a4ac 0x4b947668 0xc1dbd726 0x2adcf777
+ 0x63b1bcf0 0x818e2a1b 0x49aa907b 0x2faf5e8d
+ 0xae842352 0x82707fae 0x0aa12b41 0xa0bae11c
+ 0xb4298c47 0xd2b4099c 0x4ff625f2 0xcd2630d4
+ 0x79850981 0x05dbf57d 0xb05b81a5 0x56e73ec7
+ 0x95cb3897 0xe262bda5 0xb2c6e288 0xcb7f8e77
+ 0x72b8bdd3 0x3f400494 0x63ade65b 0xbc4adc71
+ 0x00000011 0x06c0f8ff 0x0eb63d77 0xc54cdabf
+ 0x76bc8860 0xdd142643 0xe7bfc220 0x17aa0a91
+ 0x4fd676ba 0x4b6b1a15 0x2a1a1c16 0x4fed6de0
+ 0x8c3d6bcf 0xbb319bf6 0xa82532f1 0x7c8ce014
+ 0xb830a38b 0xec25bc6b 0x61c8a8a9 0x49a21dba
+ 0xfcf8bad0 0x7372f29c 0x1f7fbcdd 0xc2ff42f4
+ 0x780878f0 0xc967068e 0xe19cc3c9 0x155e6646
+ 0x75235c43 0x9aaf3741 0x9dfd116d 0x0f031b6a
+ 0x4963e039 0x6918daa8 0x7f0ca4ab 0xd77dad79
+ 0x2f8847e8 0xf79c82a4 0x6a6aaad4 0x24f07dbc
+ 0x895d3f6a 0xc96b2eb0 0xff50228f 0x573d364a
+ 0x5fca9d56 0x3c11c35b 0x3e90fb12 0xc4604067
+ 0x5c980234 0x7c42e0c7 0x60cca3de 0x637a4644
+ 0xedc43956 0xb0efb4e1 0xe94716fa 0xa6478f51
+ 0x33965654 0xdf6b40a3 0x48ac1b18 0xd6723c94
+ 0xf040d6d1 0xaf850470 0xe2bcde48 0xb90a4998
+ 0x8f620105 0x3d592878 0x2f697bad 0x9f7721d9
+ 0xec34444a 0xb0594770 0xd7180f9f 0xa510a168
+ 0x460563b0 0x5d4f34f4 0x21dfc16b 0x051de344
+ 0xa57bc344 0xff2c7863 0xf0bc063d 0xf5a89004
+ 0x79a81dab 0x9e8cb974 0x2309b0a4 0xa47a46de
+ 0xcf9c0c44 0xf761c817 0x67ab642c 0x0db4422f
+ 0xca3616fc 0x79e66c8a 0xd56a3332 0x5e0f338b
+ 0x5814cb3a 0xed1b9a4d 0x47d59f72 0x25b03786
+ 0x3edd1d42 0x8cd947cd 0x706e6ebd 0x82c2bada
+ 0x1bf6a96b 0x77dd859a 0xda35335f 0x22fab458
+ 0xd0661fd8 0x02bb4a42 0xe2a2bcdb 0x0616580e
+ 0xd35be23f 0xc206d16c 0x401218be 0x51107c3d
+ 0xba84b8be 0xace4d8f2 0x505b9b28 0xc517034b
+ 0xac5ba582 0x7419fe54 0x43493cb1 0x2fe0a66e
+ 0x206039b5 0x07569011 0x230ce53d 0x168d427f
+ 0xbfe0bd10 0x82bf11be 0x5b55475b 0x5490a0e9
+ 0x1c3c1e3c 0xacad77de 0x1666512f 0xfc3250d8
+ 0x930a6312 0xdd85c066 0x1b95c18f 0xc8bbd3b0
+ 0x1bb2a34e 0x642c7653 0x0f536213 0x1f7ab4eb
+ 0xaa5ef677 0xe6ac9581 0xd7a2fe73 0xd417dc79
+ 0x455a6877 0xae825a40 0xe0c98bec 0xac39ba49
+ 0x299d9bd9 0x957d0bb0 0x1645111b 0xe9da4beb
+ 0x1b005ce7 0xddb742ce 0x6c5f3ffc 0x24f74d2c
+ 0xf4ace044 0xb21bc7ba 0x338002dc 0x240effa1
+ 0xd208ae00 0xfe8c2b5c 0x9a457293 0xd9365ac4
+ 0x98f24244 0xf6d1aaea 0x7b874350 0x1ba4086b
+ 0x1d3bf168 0x2bb6f4fa 0xb27f8477 0x8da836f6
+ 0xa8762693 0xc377fa64 0x74cfd979 0x90435c25
+ 0x29d80e17 0xc3503c9c 0xaacd2178 0x232c748d
+ 0x6fecd3ba 0x00fb4aa0 0xbac3ee19 0x6e5c63e3
+ 0x17823c14 0x0e9d33bc 0x0fa9de06 0x998b14b2
+ 0xfdd8c80d 0x01b0591b 0xf70bc4ce 0xb278c496
+ 0xa7e30708 0x69cf8420 0x14f8b744 0x8bb8a0ff
+ 0x168f6db0 0x95da6db2 0xf96d121d 0x67fd06f7
+ 0xcd81d278 0x8693d095 0x15e1a24c 0xe5f554f2
+ 0x499874e8 0x30fc0785 0x0f4fa1b9 0x65c93dad
+ 0xd939bf24 0xdad29721 0xf253b752 0xf6ff59da
+ 0xc5dfaffc 0xf0071f34 0xdb0db8b0 0x24475e2d
+ 0x2a4d5b8a 0xf7624bea 0x3fdcbc90 0xb5a66e35
+ 0xd0f08636 0x24643caa 0xc5d08e83 0xb134c55c
+ 0x8e3653c7 0x34496b0c 0x6b2aeebc 0x2fbab601
+ 0x105613a2 0x7babd55d 0xa01af846 0x248be690
+ 0xed27917c 0x26ee6e13 0xa1dac5fe 0x852ed91a
+ 0xfc83fcca 0xdf479c33 0xfd6efe96 0xdc62521b
+ 0xa37d2a8c 0x1d2bad9e 0x4287614f 0xc4f7b62c
+ 0x2aab0562 0xec6d4226 0x52853fb4 0x264e3507
+ 0x1c3af366 0x33269776 0x81b8529d 0x115530dc
+ 0xe035f98f 0x433d1b6c 0x1ea6daea 0xecfd2ad2
+ 0xa57a0c22 0x1dbe3e12 0x6fafe41b 0x8e579e35
+ 0x6c493fbb 0x034dd4f9 0xd17cd6f2 0x05c5cfa8
+ 0xd9bffa39 0x0fc16e9c 0x831b88c8 0x7e7dce3e
+ 0x3320bc7f 0xd5abafaa 0x217ab526 0xade2597d
+ 0xf01b00f2 0xc9e34b72 0x00a4cb0b 0xdc198512
+ 0xdc7cc8a1 0x89db07b5 0x6c2153ea 0xb8bdb8aa
+ 0xdf8a1ae8 0xa517f6b1 0xd32569d9 0x37e79008
+ 0x3c7527c3 0x7d5b2d3b 0xb31cb907 0x35db7f6c
+ 0x0ab0cd65 0x75feaded 0x7c8260a9 0x5bc04f56
+ 0x2fac9f60 0xd7b3a2c0 0x2b393634 0xc2df7f43
+ 0x1ff2fa9f 0xc81af169 0x188b1f4e 0x08bf6f86
+ 0x5ab2f188 0x0a71eb64 0x03b57501 0xa684fc23
+ 0xa729ffef 0xe3b4a709 0xf9eb97d2 0x01506c95
+ 0x0d9285f5 0x8e1ee93c 0x7d15a0d8 0xd9390673
+ 0xf116ebd8 0x7e68798b 0x3dc8412e 0x5a9a04b4
+ 0xe3805f51 0x00493bb1 0x4ec65ca2 0x2aedd69a
+ 0x7f2a5b18 0x9994ac32 0x476f3703 0x7d3da882
+ 0x5635f55f 0x7a0887e0 0x0af46feb 0xfc2f3591
+ 0x02e29400 0x70fd3234 0xc549379e 0xaf34fa5a
+ 0x5bf7c649 0xeb183cff 0xa236d508 0x4525ab64
+ 0xc4301026 0xf281df99 0x0b298e46 0x9b7c1a99
+ 0xc4b24e77 0xea536992 0x5a39e37c 0x570fb6df
+ 0xae5d5c49 0x01142cc2 0xda05d3f1 0x337bf65c
+ 0x3c986598 0xbecefd30 0xb5e34c2a 0xe7c3847f
+ 0x18cb24b4 0x71278c26 0x4b8d6caa 0xaf7c300e
+ 0xfb6ce9b8 0x94c4b785 0x67275f17 0x59498cf5
+ 0xca8eeec6 0x3374e7a6 0x649affac 0x9049ba78
+ 0xff9d3908 0xaceec446 0x225ece3a 0xac1d4fec
+ 0xdc050fed 0x04e3ed8a 0xb303d8e9 0xe9d26aff
+ 0x0a98691d 0xf243492d 0xe3b42f00 0x6c21a97b
+ 0xa385ae98 0x14ba3f4d 0xc0215cc1 0xe1ba6c0d
+ 0x412bbbe4 0x39f95d1c 0x593bd878 0x45d3066a
+ 0x9fcee8a1 0x3f29b2fa 0xc9ae58ee 0xed6def92
+ 0x6c8f2182 0xdba64e20 0x276c2c21 0x81ea9dfe
+ 0x20ae00b2 0x8c2d2724 0x66c09f5c 0x24908e2e
+ 0xfecf8194 0x6be61e94 0xcdf5d7db 0x98b829a3
+ 0x4241ab07 0x1207ef2f 0x96e7b073 0x766293ea
+ 0x58eb0882 0xf12a6426 0x741b074b 0xbd4302cb
+ 0x909b6c4f 0x1c4949cc 0xd4d6a3e9 0x442b74b3
+ 0xbc8cb3f9 0x0efad89a 0xa2ceff3d 0xecdf86bb
+ 0x46a4a72e 0xe9d8abe4 0x94c91479 0xe99a80b9
+ 0x1072b708 0xb8318ad3 0x0685426f 0x3e89a0d8
+ 0x0b7c438e 0xb4b577d0 0x046599e2 0xd0ef85f2
+ 0x3566d2d2 0x43ade22b 0x8753a78a 0x8f6d8e02
+ 0xbdf33e56 0x8b2b6696 0x22a5e911 0xd0e0f4eb
+ 0x42729c29 0x425921fb 0x82f7634e 0x2c145fd5
+ 0xff59deeb 0x018a5372 0x33c4e11a 0xc001c097
+ 0xf250cfcf 0x2f682912 0x21f40dc0 0x883196aa
+ 0xcd5c58d0 0x7c329754 0x481c450e 0x9411c6c0
+ 0x69a9df82 0xacb01a1a 0xc0b569a7 0x0b7fd1a9
+ 0x4c339ad3 0xb0d9e211 0x07098664 0x14a5cff9
+ 0x53beae37 0x4e173257 0x4e1d2e6c 0xce981dd1
+ 0x45d6204f 0x3c193268 0x4f51ac3c 0x5ecffa12
+ 0x48068ee9 0xde12270f 0x0a0aa980 0xd6fe8ca2
+ 0x97d51da8 0xccf2db36 0xb3ad0598 0xbc56eb56
+ 0x0adf5e5e 0x9e320aa1 0x8ebb75ef 0x3973a323
+ 0x7e3d87e0 0x2c0d1858 0x83b7fa0c 0x36effdb5
+ 0xcd9eba1a 0xab5b5790 0xa48fbf00 0x536e2ae9
+ 0x2f2a3f61 0x05706a73 0xd2dfed08 0x7e4626b1
+ 0x172c6ced 0xbf2e44ba 0x15aefc2e 0x9cf56c37
+ 0x663c6695 0x04cece5f 0x4ce00027 0x465b1cd4
+ 0x333dc2c7 0xce41f1f1 0x6dd8503b 0x52b79af7
+ 0x564c81de 0x0e5e2daf 0x869753f5 0x16667889
+ 0xe1acaf08 0x38ffbb0b 0x83400589 0x5144052f
+ 0xa3819950 0xd21501c5 0x1bdadeda 0x0a874e2b
+ 0x05480284 0xe8f76f11 0x582cad8a 0x0553f942
+ 0xb6451cb9 0x76bdc86f 0x96ffe0c7 0xc630eba2
+ 0xa82ec683 0x5902ef45 0xc362248c 0x18c412a9
+ 0x1d09c103 0x2355ed98 0x5ec5c718 0x5037e359
+ 0x1508f804 0x09cfea9d 0xa16cbdfa 0x5f962b17
+ 0x85a35a27 0xa048dd30 0x6fe7ba90 0x0dc20150
+ 0xcb56daa0 0x4188fb20 0xb4182598 0xa1bc5dd7
+ 0x8c11e0bf 0x2104df35 0x025e74b8 0x79d177df
+ 0xad74bb77 0x4b2419aa 0xe374add2 0x411593d5
+ 0x796778da 0x9e43a420 0x4a2e0860 0xefb48578
+ 0x47cafbdb 0xea15924d 0x70ac1467 0xf52fd888
+ 0xd2df4bd6 0xc1fc63bb 0x119ab88e 0x0e147ead
+ 0xa85bd8b5 0xc2e61ddb 0xd566417d 0x6bb9f9ec
+ 0x69bbcf1e 0x24d46989 0x3caf067f 0x58151211
+ 0xc2a6b6e5 0xb233416f 0x3da28155 0xf9cd9385
+ 0x7a530045 0x1eab05ce 0xb86ed141 0xa8f13a5b
+ 0xf9819f81 0x66d5d5c5 0x148c1a02 0x496d3c56
+ 0x370dcd45 0x5f13f0b6 0xdd4eaeed 0x8dbad50d
+ 0x0747ce54 0x69d2adcc 0xfb69c18f 0xd44ea186
+ 0x74ab7537 0x0c642449 0x88b096cf 0x3a8ad683
+ 0x408cd7aa 0x6daa6708 0xb267b312 0xa4225c7a
+ 0x7a56dce7 0x6a8d497d 0x8837bcbb 0x6125397c
+ 0xeb51d233 0x362bdde9 0x689657f7 0x32d09e1f
+ 0x753a3d39 0xf77db5b2 0x8057908a 0xef12815d
+ 0x594fffe6 0xcf3402c5 0x1a0d4923 0xca547b2f
+ 0xaf9d604d 0x5d2e30f3 0xffe18005 0xe29bb0d9
+ 0x36fc10f9 0x3720aac6 0x37bc1ad3 0x47d000ae
+ 0xa4b0da0a 0xa178228b 0xdd9374e6 0xa1f3df5f
+ 0x9ae2e451 0x21c4aceb 0x8f9fb226 0x5190b712
+ 0x70253633 0x9c9cb5f1 0xc9178689 0x551c1a2d
+ 0x6db67cc0 0xcf1b1ade 0x48449272 0xd18634f1
+ 0x9d9c3de7 0x19025530 0x121d78d4 0xae4a39e1
+ 0x62850819 0xf3d4af6a 0xe5ad5b80 0xfa053c7d
+ 0x7ed68b9a 0xdbde2894 0x4b5c04de 0x65178203
+ 0x9181cdd8 0xb17e27b9 0x0e29b338 0x50156ab4
+ 0xf7726438 0x178108d6 0x1d8dc6b7 0xc3e7512f
+ 0x0eb8339c 0xe2684a6f 0x7668ed31 0xd0ed6eda
+ 0x4342a534 0x03840286 0xad1e6969 0xa9a6c98d
+ 0x1bf77774 0xd32fc9d8 0x405620d2 0x8ab19efc
+ 0xce4d7506 0x6f4eaae4 0x3e830dbd 0x76818782
+ 0xfde4ee8d 0x1953cd0f 0xd47be276 0xf2480bc0
+ 0xd1010013 0x2dd56a58 0x083084f4 0xc91b0ad6
+ 0xc2524e12 0xa60710f2 0x3d955047 0xce380846
+ 0x0f6dec2b 0x604d1492 0x5ca43ee1 0x6b51a626
+ 0x350d5483 0x8d99ae30 0xcba06491 0xcc0185eb
+ 0x7b64caa6 0x2f1754db 0xca0691f1 0x6219efb6
+ 0x43291db0 0x259d3f12 0xeaf6ef9f 0x5f0e065b
+ 0xad576541 0x8615a414 0x81124bdf 0x62b855a9
+ 0xabdc529f 0x01bfdf75 0x10e4c656 0xf8e86f78
+ 0x1fbe10d1 0xa6873c2c 0xdf83dcd8 0x20d35872
+ 0xf46f2861 0x22f3d642 0xfdcda29a 0x16adbdb4
+ 0x01e5844c 0x011e5454 0xf5432b04 0xd5f6a80d
+ 0xb081fab6 0x64fc2fbd 0x4ca76e0f 0x3a8d8b29
+ 0x3f03ec12 0x58e2bf6c 0x24f2b8b1 0x108e414f
+ 0xe76a02ab 0xcb525af9 0x623ba7a3 0x31412c27
+ 0x69c2f5db 0xd5546d8b 0x8200d2c9 0xf1e34a71
+ 0x393e24dd 0x2b867933 0x0596e778 0xc5112b49
+ 0xf433cdea 0xbc505e7b 0xf64bb064 0x1e892633
+ 0xbf17307b 0x9118de2c 0x6b1d61a8 0x1945519c
+ 0x32638ca4 0x5e436733 0x3dc20ff6 0x9babf127
+ 0x485c1555 0x0d0c4e2d 0xc4d5d718 0x8cfffc16
+ 0xf64050db 0xaa4ef416 0x8d398a00 0xe4a16eca
+ 0x5d9d9314 0xefa2bf1c 0x05917dd4 0xca5f1660
+ 0x59642534 0x02639b9f 0x12b895df 0xb2deaf0e
+ 0x20d8f0b9 0x04d8342c 0xa1ba5f57 0xa26cdb06
+ 0xca732ca8 0xdce0c561 0xf5e4b205 0xc05f5cfb
+ 0xba4a41a6 0xaf219d7b 0xce08df01 0xa02bbdb9
+ 0xc1adbc20 0xcb9ae4fd 0xd828cfb5 0x690b17db
+ 0xd29ae8bc 0x8fc71289 0xd6fc9cf6 0x61c7a6fc
+ 0x8e8012d5 0xd3320498 0x36e80084 0x0036d3ab
+ 0x53141aae 0x987d0cba 0x57581df5 0xace4704c
+ 0x3ce49642 0x991556c1 0x6cb0b984 0xac15e528
+ 0xe7d208ca 0x2486d1c5 0x93b6623e 0x340b7622
+ 0xe7e1cf7b 0x3cdeed88 0xa23c849a 0xcc6e8b3b
+ 0x292add5a 0x17763ee1 0x9f87203e 0x72cf4551
+ 0x2053e66f 0x06c3a411 0xb61c2e0c 0xa4a7f3ae
+ 0x0ff87dbb 0x03999ed8 0x48aacedc 0x2e126ef3
+ 0x799441bb 0xaee15b4d 0xea08bf54 0x47248787
+ 0xb60afc11 0x8c3d6a20 0x7c04f801 0xb902760e
+ 0x319040eb 0x370bbd5d 0x9a1dd5e6 0x63f7da1d
+ 0xb3784eac 0x3b304dea 0x987ada9f 0x2b6b1cda
+ 0xf9241003 0x0d3d16f2 0x1185dcbf 0x519b7a5f
+ 0xeb612361 0x28b57da5 0xdeb8419a 0x0ba13122
+ 0x062e28fa 0x5ffb9b36 0xb1258247 0x8337401f
+ 0xed1f6423 0x730cafe6 0xf728c690 0xe40557eb
+ 0xc4951a15 0x04a988a9 0xbf5fe18c 0x2766e40a
+ 0xe4d74d13 0x8638d052 0x8eefeaf2 0x9ad07978
+ 0x32042a87 0x4385f38d 0xc9b48f02 0x02ab0ae7
+ 0x9eaeb632 0xf386c14d 0x8b1c2ab2 0xad432a24
+ 0xfc5bd462 0x2d7ac5fe 0x45dff5c6 0xa235e1a6
+ 0x825b770c 0x5568471b 0xa7ac3a3a 0xfcc6e40c
+ 0x0c1be59c 0x77685a3c 0x5b1bafbd 0x40b8a139
+ 0x3dd1bf01 0xb6651001 0xf2915a6a 0x16fe1cf2
+ 0xe78467d1 0x4bec9fb1 0x88615320 0xa3920831
+ 0xed4afac7 0x206cffba 0x96c42567 0xcc2b5215
+ 0x7ca0193f 0x0e1a60e5 0xf3892c10 0x2ceee7b2
+ 0x110d3311 0x9a322e7e 0x3cb7e5fc 0x3fb971c1
+ 0x59971332 0x08386001 0xe4a2444d 0x17d9c47f
+ 0x9f53c4a5 0xdb54e5c2 0xfaac9f08 0x975c07c6
+ 0x8a6e6bcd 0x4392053a 0x6473bef8 0x4b3b91a3
+ 0xfb7e8ebc 0x46c6ffed 0x04939839 0x71b93766
+ 0x47e4f74a 0x786545c8 0x77f55b59 0xdf8e992d
+ 0x60a0d2a5 0x6cc8a5cb 0x113ee95c 0xa378558d
+ 0x5d3b8bd9 0x3c95b2a8 0x6efa3682 0x9535dd34
+ 0x3e29974d 0xa477d069 0x2dbf58d2 0x165edae3
+ 0xea25d53d 0x44e3ef71 0xba6341cf 0xc61b964c
+ 0x4612838b 0x62151b9e 0xc1de2511 0xa364130c
+ 0xa9710643 0x1a436c70 0x97030b09 0x5cef28e0
+ 0xd5197e49 0x02b9ffa8 0x1b52dc7b 0x04f9428b
+ 0x01ebed2a 0x1eaecbee 0xc53c4d54 0x3e34c125
+ 0x05b4f37a 0x6e3d042b 0xf1c1f40d 0x39cfe9e1
+ 0xd2938e89 0xa14b9846 0xb1333676 0x31068254
+ 0x4b627e4b 0xb5185882 0x101b52bc 0x73e05abf
+ 0x68a4e24c 0x67e301f4 0x6bf8b538 0xc502e1e1
+ 0xc3889b5b 0xdfbc6d96 0x4239d0e1 0xbf3667ab
+ 0xb0c4cb00 0x3efdcffd 0x7cd9661d 0x4f5eca03
+ 0x0ef218dd 0x464f0826 0x048fc539 0x6a1c63fe
+ 0x76cc341a 0x1ae2945c 0x7a339006 0x858fdc20
+ 0x2a4a7270 0xd4cbe12c 0x7b27e5d8 0x998cf520
+ 0x4795ccf7 0x52e15388 0x86aa7b96 0xff1845fa
+ 0xd49d1061 0x035b6a80 0x1df18220 0x28fc4fd1
+ 0xa8e8f333 0x3a9240a6 0x41a4caca 0xee736b6f
+ 0xdfa7ce4b 0xd4bf5c0c 0x4e62f6d3 0xe98ae9b4
+ 0x7f544550 0x2b0706df 0x8fb2e752 0x546af9d1
+ 0x8517758f 0x53f522fc 0x03bd1819 0x6fd264e2
+ 0x16839ef8 0x44a1200d 0xcd5a586b 0x1ead251c
+ 0xf58dd3be 0x80217ce7 0x0367ff42 0x2d8f2ce8
+ 0xe8a0a689 0xba33e366 0x5dc7980d 0x005c0eaf
+ 0xc0c44118 0x5553076a 0xdaf39389 0x703e09eb
+ 0xc54c8112 0x4a26135c 0x36a46f2b 0xdc93ee12
+ 0x7060db72 0x7778befc 0xe028fc55 0x52e86278
+ 0xd0b00188 0x6ed5565a 0xb5e2785c 0x3608bffa
+ 0x55c3f5a3 0xe1e41afa 0x08a227fe 0x94c793ce
+ 0x650934f7 0xddc36524 0x6dac40de 0x9eec3ceb
+ 0x8fe3d1cc 0x3cebab86 0x61e4d63a 0x5382ea11
+ 0xa90c9495 0x0277ccb3 0x412cecc1 0x5853c945
+ 0x97df9a48 0x364d9b10 0x7e8c9bf1 0x6b4974ef
+ 0xd3dbaeeb 0x6626dd26 0x2b746d2c 0xfb762155
+ 0xf942f687 0x1317d1b5 0x0c989def 0x5f4c0ed6
+ 0x31aebbd3 0x51cd8d5b 0x3d729511 0xc07c8f23
+ 0xa7f3e6f7 0x7683dba9 0x5f051d5c 0x750437f5
+ 0x1b9ffe98 0xa4de609b 0x4c498e9a 0x18dfc535
+ 0x376c6c34 0x19a57039 0xa70e93eb 0x7e966bc7
+ 0xb6e9d77a 0x3ab98e5f 0x1607125e 0xe8845aa3
+ 0xa20a2d80 0xb17ac63b 0xa07a9790 0x71e5a14f
+ 0xb6b5fc78 0x4c610f86 0xb57b21b6 0x1bcfb3ac
+ 0xbf812998 0xd429986b 0x02b837e9 0x0823aca8
+ 0xd8a85194 0x708bad39 0xff94ef19 0xc3599461
+ 0xaee622f6 0xa8b5a808 0xf801b298 0x0aeb35b7
+ 0x4db4bf27 0xfa31c205 0xa047dc66 0x7e0ae406
+ 0x2ceea6cb 0xef0ef96f 0x4cc4fdba 0x6161256f
+ 0x94505fd1 0xbced5596 0xbf9e36a5 0x271e68bd
+ 0x7a3308b6 0xef1af50d 0xb55ede06 0x6783e602
+ 0x1152acf0 0xdc644ccd 0x1b692da3 0x59f6886b
+ 0xd7236158 0xe39d75a6 0xe7026697 0x25496283
+ 0xb6b0a61c 0x09d0931c 0xe8d459a1 0x1a124097
+ 0x88e50621 0xf2ed18ff 0x37681783 0x4afa1ffc
+ 0x8a96ec4a 0x4474a860 0x274591b1 0x59df3968
+ 0x34f56fb9 0xce821f96 0x7ec825b2 0x6ed4a9bf
+ 0x687253cf 0xa511c1d3 0xaf2bd6f0 0xd1ce1a5c
+ 0x241dd505 0x39037238 0x0c761934 0x53181db5
+ 0x11ad47ec 0x915a527b 0x748bc970 0xeb8f2669
+ 0xb8bfd5af 0xd8d19145 0x0361ff58 0x6dc6e2f2
+ 0x1fd06556 0x120db4c5 0xbd704c8b 0x70a1a57c
+ 0x27543851 0x095403a6 0x28171887 0x640e7c92
+ 0xb48fd7d1 0x62ad2774 0x224767cd 0x347b8843
+ 0x821ca7f3 0xf94749c6 0x2bc7f40f 0x700cc1d8
+ 0x50d50832 0xc2f9465c 0xa6e1cbaa 0xe0f5e934
+ 0x7f33617f 0x8876cb07 0x408c24fe 0xc0cfcdf7
+ 0x39152b72 0xa0ba80ab 0x301a73eb 0x6e704f6c
+ 0x3b73c24b 0xd433f861 0x43192007 0xa56d2ca4
+ 0x2d28bd5d 0x14f4c9cd 0xb7fe189c 0x031e1818
+ 0xf8f4133e 0xdc8e7727 0x4f8f5a06 0xe7b114cd
+ 0x5cb9ff12 0xdb4c5a53 0xed956df5 0xf3634f5f
+ 0x6cce1cc2 0x5393f9ac 0x1184c2f7 0x0b6fd240
+ 0x64771374 0xaafed1a1 0xbdc55bcf 0x976414ef
+ 0x6a333e56 0x0c5cefb2 0xff2574e0 0x11b059ef
+ 0xff8b7f2a 0x9651e97b 0x594fe89b 0x7be60f6a
+ 0x7b7695ac 0x612036f7 0x5be0d4fa 0x25855737
+ 0x12e32ee2 0x8e86130f 0x46d75d41 0x3769d438
+ 0xd14752d4 0x1612ad6d 0x8f86f2a0 0x63e01251
+ 0x9a44ac4a 0x49fdb148 0xe1757062 0x42798804
+ 0xf21f46c1 0xed0a3794 0x5528add4 0xeddc0c90
+ 0x7f188ce8 0x59568b7a 0x8e25d50f 0x9277c492
+ 0x955c6e6a 0x79f94a59 0x3a65fb08 0xceb23267
+ 0x7d8dce01 0xd15c492d 0xa35f005c 0x0e7cba9a
+ 0x950485d9 0x2d92e448 0x4aced016 0x0d10136d
+ 0x3d2ec365 0xd982e881 0xe81940d2 0xb1a84849
+ 0xdb30d967 0x9f51d3d4 0x4fbe18a9 0xef21cd28
+ 0x5d3cba6c 0xaa89b02b 0xbe1e9526 0xa20a918e
+ 0x0c26bd72 0x8372eff8 0xcf7ab414 0x1d3ab83f
+ 0xfd2c8f79 0x4929f77e 0x2416e8df 0x65dcaaca
+ 0x58fbf7b3 0x1c4a3089 0x9bfb6e26 0xc7338ac9
+ 0x88e5ad26 0xc62bb3d4 0xad6d36f5 0x6445167d
+ 0xe9de8daf 0xc391c6bc 0xa78b4558 0x0216bcdd
+ 0xbd4365b9 0xb0a874b2 0xe95e9453 0x77296b9a
+ 0x49803c1e 0xc01fd0ed 0x165a9d5d 0xf7da6442
+ 0x4c00818d 0xaad5bfca 0xdb252937 0x0e4e0f74
+ 0x0c2738e8 0xd075b8ba 0xe3b2df11 0x8aee60a4
+ 0x36052cd8 0xb4aa190b 0x413e7155 0x3e7e646d
+ 0x807e6eea 0x97993e6f 0xa5129ff5 0x98e01bca
+ 0xa8bd70c9 0x8800721e 0xb3407ffa 0x266b2f99
+ 0xd9da73ee 0xa06f634a 0xcaae53b1 0xd98e53c6
+ 0x49368291 0xc89485fe 0x938a8a29 0xb57f77cc
+ 0x58c867de 0xcdac8a84 0xf4d57b6f 0xc6daf080
+ 0xe3d9c67f 0x0264b194 0xc3b2ca50 0x6d214667
+ 0x88503872 0x549ed8cf 0xe827689f 0xcbe94e2e
+ 0x4a02516d 0x24ddcfa1 0x3cbc736e 0x34c88707
+ 0x9f4c9376 0x4ced4d41 0xfdbabfb5 0xafd291d9
+ 0x2fa602a3 0x53e19d9c 0x44422427 0xf85e2c53
+ 0x40e91ef7 0x02646045 0x3d1fa703 0x1613b99f
+ 0xa108de10 0xf9cb3d04 0x7b9f9523 0x007d74b1
+ 0x961771dc 0x2e49fe1b 0x5fefe27d 0x54737b43
+ 0xa11d7c40 0x7f0cc2d9 0x67c6533e 0xd1ab10fa
+ 0xb1950645 0x536087d2 0xd6937b40 0xc35960c1
+ 0x2df0c356 0xecb5ab53 0x61e08998 0x1671bdd0
+ 0xd72935b5 0xdf1a9d7c 0x70b1aa4e 0xa9272818
+ 0x1f7b8d55 0xc7292a0f 0xda7af847 0x190076ad
+ 0x58370ba6 0x3020fb4e 0xff8a4b30 0x13818958
+ 0x6ba1ca38 0x6a90d39b 0x5e180929 0x206e8a22
+ 0x0568f241 0x5f83ad21 0xef05e5c6 0x21d0521c
+ 0xe7886eff 0x68eebbce 0x550c1659 0xa0843444
+ 0x19468c2b 0x539cb9b8 0xa4b18b62 0xdab0680e
+ 0x1b254dbc 0x47068aaf 0xa8193743 0x44b60b88
+ 0x90c07337 0x2e55666a 0x632f4b23 0x68af10db
+ 0x8e29f54b 0x5f436bcd 0x8bf81d55 0xb640ccc5
+ 0x2e4ab6a9 0x198697a5 0x8a1c8481 0x572fb679
+ 0x7597c416 0x608fd45e 0x57c8c7f4 0xe151d349
+ 0xed9e17bb 0xa66f2816 0x8175fe68 0xd57d91ad
+ 0x79df0711 0x7a349868 0x13403cd4 0x7d974c60
+ 0x8860ce70 0x2e6d62ea 0x8916e2f2 0x0e336838
+ 0xf54d382d 0xc4e172c8 0x94bfcfbf 0x5fa53172
+ 0x2933cecd 0x4d5b8439 0x0ca0e6e4 0x8ef87b00
+ 0x2fdd121c 0x24beae76 0xa85b47f4 0x4e38af2e
+ 0x12b8734a 0xf698abf4 0xde2c2d93 0xeb100795
+ 0x8ab19df8 0x93a6f4d1 0x43c4b2cb 0xbaff7c4a
+ 0xf52b1471 0x72804f4f 0x0c0ca257 0x1dc24c77
+ 0xbad7203b 0x3a998fa0 0x9cb20388 0x7ef1fb3b
+ 0xbae66020 0x9a22144f 0x39ac47db 0x3f145996
+ 0x05a32b6c 0xd201a2ec 0xd868727f 0x08b2df4f
+ 0x4583bbfa 0x9a422baa 0xa6a2e8f5 0x236310ec
+ 0x5aafc3cf 0x344156a6 0x6f964ceb 0xed0495ae
+ 0xb5638c98 0x2c8e84ba 0x63d8c7a5 0xec956b66
+ 0x69c54f32 0x767874ec 0xe8fb6ce1 0x68b1c780
+ 0xe4b861e4 0x2787cc38 0x4b2202e7 0x23b476be
+ 0xecdf296f 0x094aa000 0xe95ef073 0x4182ebb5
+ 0x30daa31a 0xef68cb68 0x2fbcf6bc 0x21c52620
+ 0x19abf83e 0x4de7528c 0x05fe4c05 0x32c2a1e9
+ 0x8c23abdb 0xabba9a90 0xa6a215c1 0x891f915c
+ 0x667cd65a 0xaa5a9b2c 0x689fd1e9 0x42b52c95
+ 0xd9872e76 0x05dd5278 0xc19798f7 0x8d031d86
+ 0x25690670 0x165f4b19 0x76b51d6f 0x61cd8232
+ 0x7b530271 0xa8e9326c 0xd952e94d 0x56a7021b
+ 0x128be860 0x4da40144 0xeb4ac3d5 0x82b7ff5a
+ 0xea2abda7 0x690a9ebc 0x33562378 0x6bc91b2f
+ 0x46134185 0x8fb77fb2 0x029518a2 0xe1fa1f4c
+ 0xf78783b9 0x5d8ebe63 0x103e8050 0x924085bf
+ 0x80593f2e 0x5be4bcb6 0xcb935edd 0x882d0a5f
+ 0x7deb8205 0xcdc0fe2e 0x9c333db4 0x1d0c888d
+ 0xf8dc3575 0x2f901125 0x6bf48cdb 0x98ab6fb4
+ 0x491d7df2 0xa064922e 0xbbb86c70 0x88aad77d
+ 0xfcff0669 0xb0c47c1c 0x0fcc6fe1 0x50df8a83
+ 0x014460e4 0xb014e6ab 0xbeff4bc5 0x8d939fae
+ 0xd750ae17 0x42dd29c9 0xdb1cbf70 0x82265be9
+ 0xd11afd6a 0x21834e1c 0xd11e3c3a 0xbe568139
+ 0x6cf92d50 0x9304ebf1 0xf177046b 0xa5b127a5
+ 0xfb57e4a7 0xf94291df 0x0f089d58 0x07395b5f
+ 0xde4ba5b9 0xf7371fc5 0xae44f190 0xd529271d
+ 0xbcaea246 0xfa777c0b 0xad3bab9f 0x0d6251ec
+ 0x6f4fa894 0xc39273e2 0x7710fcc3 0x81f08a5d
+ 0x395b54ee 0x87295638 0x57398bb0 0xfd46c7c9
+ 0x3f1dafc6 0x548479b7 0x37c42fba 0xa2130147
+ 0x99dc0bb0 0x3596c5cf 0xbcca6bec 0x418735ed
+ 0xfcd4273d 0xee141135 0x8457cf47 0x95fe7220
+ 0x041aaf8a 0x6e947153 0xc963afa7 0x09390a74
+ 0xc40dffd3 0x4208039c 0x319b1f84 0x42b6b3b7
+ 0xade789da 0x83338c91 0xf2d74712 0xe80011dd
+ 0xdd61645e 0x286fc63a 0x26e2fb23 0xfef2b4ea
+ 0x3290efb8 0x595a0c17 0x6cd9bea9 0x7be1338e
+ 0xe0ff2c09 0x1b93aea5 0xbbd97e91 0x5e1ae1e7
+ 0x7c6c078b 0x0b9b3a03 0x43d38011 0x824cd94b
+ 0x9725170d 0x87ce6f33 0x60525d85 0xc0a5e853
+ 0x242e613b 0xebf72857 0xcb500fc6 0x0de5c3f0
+ 0x382b625d 0x08840e50 0xcef30663 0x1bc848b6
+ 0xefa78141 0x81b860d6 0x4eb125fe 0x7e125296
+ 0x276a5558 0x45caa775 0x7c6ec23c 0x5dcddd08
+ 0xc41aa32d 0x6a2851b1 0xb69ae1c1 0x8f603c43
+ 0x763497f2 0x73344cbd 0xcffd175c 0xfccf5a91
+ 0xb2318bf7 0x66ac628f 0xa98fa975 0xb68e5426
+ 0x27555715 0x5157a93f 0x666fd404 0xb37fcc40
+ 0x563b0512 0xb70f8446 0xe10d257f 0x73793ef2
+ 0x31a84915 0xe0de9489 0x08dfa368 0x9169d4fd
+ 0xc14f5c9a 0x92e6db4f 0xa30b6cec 0xca04670e
+ 0x8a664367 0xe8984e70 0x1c96a39c 0x655f9abd
+ 0x6999a190 0x76267621 0x0f49f963 0x8ddad3a1
+ 0x51fdab6a 0xaf0d6863 0x23b71bdb 0x32818c8a
+ 0x6398044d 0x26c60bec 0xb0b631fa 0x938f69c7
+ 0x52f11913 0x1e6fbe7a 0x92dcd409 0x419bfeae
+ 0xb147bb96 0xbac5bf9d 0x08de155a 0xde8ca968
+ 0x20aef902 0x62df25a8 0x64a4042f 0xef19da4e
+ 0xc75fd112 0xc9863e47 0xaccfdbcb 0xd29b6090
+ 0x6dc67b4a 0xa84b3cd6 0x45a0e708 0xd28673bd
+ 0x00bebebe 0xd5e518d7 0xc63d647c 0xa28f5f6d
+ 0x3372edc8 0xa1c44ed1 0x88e61d44 0x5e095835
+ 0x2d8713ce 0x6791a885 0xae89c04a 0xf1dc5105
+ 0x6423f3b7 0xf4e2f384 0x2d2761a7 0x38ea905d
+ 0xa263d776 0xd1936fa6 0x2fc54081 0x429a25c2
+ 0x13f6c5df 0xffffa6c1 0xfaf82002 0xe4bbb103
+ 0x2fc0c622 0x669ee281 0xec785fda 0x91156b25
+ 0xa9f4444e 0x354fdfc2 0x7c5f5069 0x72ae591b
+ 0x73bfd64e 0x6b96d744 0xf261daaa 0x2de15dae
+ 0xedaba9c2 0xf287b3fd 0x8b2097b6 0x589934c0
+ 0x7edc2a73 0x469b16eb 0x247b9a22 0x8b7e6c7b
+ 0x3e71ffe2 0x5275f242 0x032a211f 0x977bff60
+ 0x4306ad03 0x6a212383 0xceb36448 0xa2a79209
+ 0xe3842f42 0xcee0cbe7 0x37cdb626 0x29a0a515
+ 0x2857ead6 0x981d5d9b 0xf0ff9b06 0x95de8cad
+ 0x4dcb565b 0x065d585d 0xe7eb754b 0x278fa774
+ 0xe4d8fb7a 0xe152f018 0xfb7bb25e 0x50323b64
+ 0xba618e43 0xf8cb1c61 0x1b6dce25 0xb4fc7867
+ 0x2a7fb213 0xea9e646e 0x3f9b735b 0x5640315d
+ 0x0793ba5b 0x71ff31fb 0x4b41f1d6 0xb1538146
+ 0x336f4272 0xf176d509 0xb7fc03c5 0xd6a1c927
+ 0x56a68c10 0x8b4740cd 0x14c54f8a 0xf07ad8a9
+ 0xa8403db8 0x37c23f2b 0xdca69aba 0x4b39ef9d
+ 0x2af13bdb 0x6baace1f 0x8c7ca0d2 0xba86bd02
+ 0x2a74681c 0x5542ae58 0xc36709e2 0x82b34568
+ 0x26ea06be 0xd4bf458c 0xde209de7 0xa311b4e5
+ 0xdc00e139 0x7d305958 0xc5d76ed7 0x0943a285
+ 0x48ce4e29 0xe371bd9a 0xfe6a6501 0x4167d215
+ 0x402e47ba 0x588458be 0xbf4bcf37 0xf7fa27a8
+ 0xb725f91a 0xc17f5c07 0xce771dbe 0x66f9d592
+ 0xe8521ed4 0x42f75171 0x343b3e74 0x2d5448b5
+ 0x2d1fca8c 0xd7a32431 0xc29a88d2 0xffb07fd7
+ 0xcca0333f 0x43204f2f 0x866c1867 0xcb215814
+ 0xfcb67d4f 0x423680be 0xdf22f6d6 0x03373eda
+ 0x3bd202e3 0xd8972fe3 0xb7733d70 0x7a472c76
+ 0x6cc8a627 0x3b27e643 0xa3475f3f 0x87ffb286
+ 0xf823d69f 0x6d57c38e 0xa0fd464e 0x53e2e341
+ 0xaaab23ef 0x439429ef 0x55ba2a2b 0x4da5ea4c
+ 0xc1fe05fc 0x874b7a34 0x9a875956 0x713ccc90
+ 0x49afcff2 0x5905dc0b 0x1f5dddb7 0x8ef5c1d9
+ 0xf60eca50 0x25172569 0x3525639a 0x25804bbe
+ 0x5729cd49 0x17f84e66 0xc540d86d 0x51524bc9
+ 0x9a6e9901 0xf5bcc70e 0xf7a73ffd 0x54509c8f
+ 0xec58b8a4 0x9993703b 0x6ef45fc4 0x5ce3a507
+ 0x1d73c611 0x8780e8ff 0xc7d2e02b 0x0bc825f2
+ 0x02f75fca 0xe80c0758 0x24646fe9 0xd378ff5a
+ 0x592c5619 0x6c80372e 0x1f7351d1 0x4db5182d
+ 0x3985fdfb 0x16ca9158 0x58ee1ae4 0xaf2b9fa0
+ 0xe97f60ce 0xbb911e68 0x01748fa0 0xaef578d3
+ 0xc3736418 0x8ab0deb5 0x0de16af1 0xb8369f7b
+ 0x68e43c12 0x914ca0f6 0xe950ef28 0x834eff90
+ 0x51adb952 0xc42ee4ce 0xf70ab4a5 0xbf9fc916
+ 0xed9444b1 0x845a6a1e 0xf92e7b64 0xb9ca8a1b
+ 0xa9cdfcd0 0xb5956bc8 0xb8520e59 0xdde7aa57
+ 0xb41d390f 0x364aef3c 0xf39d4482 0x8b4e651e
+ 0x0b82f5fb 0x7960e81c 0x12ed7b84 0xe9f123ca
+ 0x88a64db2 0xa0c714cb 0x57b01471 0x80ff31a6
+ 0x7571d8cd 0x857035d9 0x0508587c 0x594a4a42
+ 0x011503e5 0x27c75e55 0x03264f62 0x9316ed1d
+ 0x36e5cd1e 0xfa9b23b4 0x5bc8c606 0x0902bd38
+ 0xd6745c69 0x6fa73118 0xa50f7b94 0xc529e962
+ 0x28738486 0x7b85a599 0x2c495a35 0x85f2cbef
+ 0xa09dfe51 0x1c763ab2 0x4effdb5c 0x506586f0
+ 0xec182a58 0x45293146 0xaf8d78b8 0xa89bd228
+ 0xec24826a 0x752cc421 0xbf36aa46 0x6760e225
+ 0xe15d0987 0x6fa9bdf3 0x6837c755 0x9426d654
+ 0x14b48f5b 0x5d70567d 0x63a14f92 0x809d5361
+ 0x3b6e2729 0x84ce5415 0x7eaca6e0 0x9b467302
+ 0x8f39d484 0x8e78398c 0x33108b33 0xdc07005c
+ 0xbdc2500f 0x35f1f452 0x9d254e3d 0xfa61eb21
+ 0x2ab6c7aa 0x83561fdc 0x8735d598 0x416e8591
+ 0xfe10e93a 0x18da409d 0xab6d0bfd 0x675baaf1
+ 0x287fdd24 0x6b50b63c 0x8c08abca 0x871a59c9
+ 0x41bb2ae4 0xfba9abdf 0xb46491c7 0x4e433d5a
+ 0x01e4fbda 0x0bc40399 0x3bdb61c2 0x3cf051ba
+ 0x910daa46 0x8d4065d6 0x270667eb 0xf6d42459
+ 0x01993a1b 0x00a95dda 0x6ed5a693 0xed4fbf7b
+ 0x24dbb70f 0x67fd62ee 0xcef5f0a4 0x9e65b798
+ 0x9a9913fd 0x3d0e7190 0x4265b4e4 0x80bfc46f
+ 0x6b354d2c 0x2b90a987 0xc989cb75 0x773e6b64
+ 0x55325e9f 0x18816a56 0x07413406 0x5177ae31
+ 0x24a19ef7 0xdac405a4 0xdca2d3b4 0xab7c7b70
+ 0x42b5de0e 0xfcf918a5 0xa54d934b 0xcaa9eab6
+ 0x50e63e2a 0x4b168926 0xb2442913 0x594c0f94
+ 0xf387f31f 0x4d716749 0xc8433297 0x34c1a5de
+ 0xe929008e 0x5644251b 0x736476d0 0x0d00aee7
+ 0xf20b2f64 0x5e158173 0x9af3e568 0x5f19fa7e
+ 0xb23b2861 0x8659ee6e 0x94058a64 0x66ec4fb1
+ 0x37cd6a4a 0xbd2944fe 0x0ea44ec6 0xe7d64c24
+ 0x75a170e3 0xb4a9479c 0x2215716a 0x64a8a574
+ 0x257e86ab 0x86bae993 0x3030352b 0x15cb88bc
+ 0x576363a0 0x61138c36 0x7cc4fe7f 0x648977a8
+ 0x0ef71fec 0x1c60df47 0xc75f70ea 0x88509798
+ 0x172b407a 0xf888e400 0xef33cd15 0x5976757d
+ 0xf8cfef13 0xbf024380 0xbb9c1b02 0xe4c38ec9
+ 0xf30fce01 0x8efa5213 0xf4b48aad 0xc94c3a37
+ 0xeb1bcece 0x09a18b56 0x4e83c0d3 0x6fcf9f77
+ 0xf52f4d76 0xf3368a12 0x33b2797f 0x627b6e41
+ 0xefd05154 0xa83ae2a0 0xea211129 0xd25723d5
+ 0x7bbb0e3b 0x7131f088 0x5dd5193f 0xef5aa905
+ 0x39f77be7 0xa21b48c1 0x1ded01c1 0x5cf98c5f
+ 0x6e23d207 0xd7e7dadf 0x5932ed1a 0x2a729061
+ 0x29a89f4a 0xac0e8447 0x01ff4205 0x8b1456c6
+ 0x3fba0156 0x658c03f7 0x5c69f968 0xf6570582
+ 0x21bb0145 0x8683bf5b 0xa4b6eba5 0x4ccfe5cb
+ 0xd202898c 0xbd2411cc 0xc2fc702a 0x5c39b695
+ 0x87584ccf 0xeae3c735 0xc472b6f9 0x4249f637
+ 0x3fa89c0e 0xce5a8bd7 0xbb28138b 0xc080ecb1
+ 0x9cbf1916 0xd70424e9 0x75cc4ed1 0xa575f3e9
+ 0x1c571f68 0xe2906205 0xc26520cf 0xf9c1fc8e
+ 0x61c982de 0x1af6cfcc 0xaf397c9a 0x46830771
+ 0x623d98bb 0xda7b52fa 0x5a3c57d3 0xfa35d2f0
+ 0x4783df19 0x6ad07325 0x487406f4 0x3fae5152
+ 0x189137cb 0xd98a644e 0x17ffe880 0xeb6aa9f7
+ 0x67184e3e 0xe475734b 0x0f1113c2 0x39a4df47
+ 0xbf8f6ec9 0xe13a4d8b 0x63ec02f5 0xdfe7d75d
+ 0x1379034c 0x5db7314a 0xa9d9ad3e 0xfaaed8f2
+ 0xf0fb6074 0x12f27b84 0xc97a92bb 0xae5e3bb7
+ 0x5f7fc2bf 0x00cbc1f7 0x9360a4d9 0x3632ba04
+ 0xad044c83 0xeda13ec1 0x34a214c0 0xcf9c972a
+ 0x96352243 0xf1a35357 0x2d77bc30 0x8485bbad
+ 0x67fbaa99 0x8035b1a5 0x8ca763c0 0x109d7887
+ 0xa1c35cd8 0xdc79e308 0x4495404d 0x64419226
+ 0xacdcea08 0x9545c0ef 0x5493e09e 0x7fe16336
+ 0x41381aa2 0x5c344f46 0xb40cab9f 0xc43951c4
+ 0xd86e52a5 0xb141d934 0xd78efcff 0xf37ec320
+ 0xc184a45b 0xf4a57954 0xc8aed0bd 0xe602c15a
+ 0x71a6b48b 0xce837428 0x02733706 0xc4a4a044
+ 0xa75efb97 0xcb63d62e 0xd0580b5a 0xce499087
+ 0xc12bf4ca 0x9c995345 0x1d8adfbc 0xe62fd60e
+ 0xccbf5412 0x6161f8d0 0x64268e34 0x565d066b
+ 0x1896b63f 0x838f8f2a 0x1e314a00 0xac470276
+ 0x1879cfdf 0x4702d7f9 0x83b4d777 0x81fcb068
+ 0x1b6da94d 0xd075ed01 0x3c7734e8 0x56389a0b
+ 0x0743b9cd 0xb6b0bf0d 0x63107ab9 0x193172bc
+ 0xc7b84c8e 0x982ce2aa 0xb8e387a6 0xc264a4b0
+ 0x2ac6c802 0xb89ea335 0x052332a4 0x49932ecc
+ 0xb940f808 0xa7a09330 0x19f3f49d 0x7aef6b5a
+ 0x201d8ed0 0xf29aac4b 0x8ae2ac0f 0x998c1ca7
+ 0x665c3927 0xab4ef641 0xf136710d 0x9644ee9b
+ 0x34efae96 0x4c596035 0x8cfe8b3b 0x5d9f742e
+ 0xab2c63ca 0x017d864d 0xd0604d6e 0xab24eee0
+ 0x75916a9a 0xad0d1167 0xbeb47775 0x6ac822d1
+ 0x776907aa 0x9e9377f2 0x438c5d81 0xd70e9964
+ 0x1c09c914 0xab90e5cf 0x31cee523 0x26ba6ea7
+ 0xef00781d 0x622b886d 0x36a54031 0x88b1221c
+ 0x666333f5 0x60e1c93e 0x5e4d0e0a 0x3ee6ff69
+ 0xceb4c76b 0xa5deb4f8 0x0668ced8 0x30225378
+ 0x6697cf37 0xc5d9661d 0x089eab85 0x7684a876
+ 0x018a81af 0x221a7fb2 0x31d80de0 0x9f18ae90
+ 0xa29c9af0 0xc3e2b00f 0xda0edbab 0x7ee9cd2a
+ 0x3ab0f88e 0x02c58228 0x606fa7aa 0x7776cb0a
+ 0x4e8ad99c 0x3b527469 0x58123d62 0x4ce428d2
+ 0xee91a210 0x466ba2cc 0x043c57b9 0xaf7bdd43
+ 0x98e76fee 0x8f3eac1b 0x00dffd6c 0x6fcb1c6a
+ 0x5cb90573 0x485d4505 0x0df5418a 0x26eafe35
+ 0x0faddf3e 0x4e972930 0xe113c823 0xe45944d1
+ 0xa646077f 0xc1708ae5 0x6ba07c20 0xc7e4e234
+ 0xc6754ed5 0xbd6e85aa 0x8cc1756e 0x02afda29
+ 0x72809597 0x75b6f5a1 0x61141874 0x1774047f
+ 0x7a10afed 0xfac2c4ad 0x42cf5c99 0x24f0350e
+ 0x042f2864 0xfab55b67 0xc8ead5bc 0x914e9512
+ 0x77c8ef6b 0x8369aeb1 0x71bc947f 0x0c6b49d8
+ 0x8ddd0513 0x028ad10d 0x99a1b28f 0xe6cfbdc8
+ 0x7978b4a6 0x3ebbade8 0x9985f5cf 0x431f42f1
+ 0x004372b2 0x18b67f68 0x20111c21 0xbb6f77ff
+ 0x1783b030 0xa045d7d1 0x0e9c7e09 0x3ccbd95f
+ 0x0b84a2ed 0xf0ee3325 0x63f2e126 0x5ec4c67b
+ 0x2ca782cc 0xcaf20d04 0x8b59d515 0x3212aa33
+ 0x335ca0c3 0x6f9e0cdd 0x4d4bf189 0x44d2fa0c
+ 0x5abe9396 0x492794ee 0x10dcfcb1 0x9acda9bd
+ 0xe8aa2803 0x3f1b9605 0x3e2ecb5a 0x971bfa8a
+ 0xcbf141d2 0x0afafe10 0x2fc906a6 0xefad20c0
+ 0x9e922581 0xe69142cc 0xc9c0ba82 0xc069e640
+ 0xb99c08b6 0x4b62ca1f 0xf3c5767a 0x6ab088c7
+ 0x8f0f0c0b 0x6726f64a 0x9711a3cd 0x46462571
+ 0x3a58350e 0xa2561911 0xe24dfdfe 0x97443fdc
+ 0xf80540be 0x069978bf 0xb38a359b 0x8e574f62
+ 0x69aea75c 0xdc753fcb 0x2a74002c 0xced027b4
+ 0xda993254 0x03409b83 0xf827331d 0x75fb3271
+ 0x01ad839d 0x68520842 0xca65c45c 0x1a3db5a0
+ 0x91d37dd3 0x6168c0fb 0x935f5a08 0x002007c3
+ 0x42eb4760 0xdab3a804 0x72a6297e 0x905c32d9
+ 0x81abcfa9 0x1b21d04a 0x5a1289ae 0x424e7183
+ 0xc207906c 0x31fe9134 0x5eb2e5af 0xc9253fc7
+ 0xc32be24f 0xe5474cbd 0xeff6e1b0 0x710e5e69
+ 0xe6c4c538 0x96b5f1de 0x2abc9c35 0xddbd1a92
+ 0x8aca40d7 0xe359c238 0x954718f4 0x18b157e5
+ 0xeeed790e 0x6948a963 0x24e70bfb 0x4d681547
+ 0xf68369a7 0x5b54409a 0x1f0b787a 0xc2610047
+ 0x0f8bd269 0xd7c8c154 0x9dee62d9 0xd4738ed8
+ 0x1a66c6b1 0x5bad5a5b 0xb110311a 0xfaec6802
+ 0x6b750f2d 0xcbf8d0e0 0x11edaf4b 0xf64a07bb
+ 0x422e7c15 0xb1732663 0x1ff404f0 0x2d5052b0
+ 0x6e45356c 0x7e2201e8 0x7c5ebcd1 0x1cb4425a
+ 0xb1539a64 0xa2e4459f 0xcf1ade8a 0xfc476473
+ 0xf4147deb 0x2afbdd77 0xff01fabc 0x6597408a
+ 0x0951220b 0x6750f3ec 0x0a242763 0xf3d71c05
+ 0x84cb1c26 0xdb7a81bd 0x7aea1a5d 0x7e719a48
+ 0xc5c12fe1 0x0ce2e988 0x29ecc6f0 0x5ede901a
+ 0xda8399b1 0x31c05d6b 0xe1956aff 0x59ed7c3d
+ 0x60832637 0x9bcb7cac 0x63c530d1 0x14c677de
+ 0x9225ed18 0x065327c9 0xd1ff6a0e 0x5516517e
+ 0x53c6f5c2 0xed5983cf 0xaa1d18b9 0xbe300d7f
+ 0xadc525a7 0x07ea81b6 0xfc517a09 0x4ead3f86
+ 0x45435f41 0x2efa58df 0x02348ebc 0x30ed6783
+ 0x190b4fb9 0x85c55d6e 0xc9ed8896 0x416ee113
+ 0x9b3536d9 0x30577cc0 0xbc4b88c8 0xcda59612
+ 0xdfe2bd89 0xd60cde71 0x98843881 0xcc1f32f2
+ 0x18b3f643 0x671a14ca 0xd6482a47 0xac6a7d38
+ 0x1897da16 0x91b6fcb3 0xf199bb35 0xd38c00ba
+ 0xa8c946b6 0x52a1ad37 0xd38ed2d4 0xa1d6f81d
+ 0x5af6865b 0xebdb858f 0xb844b110 0x53201ea2
+ 0x08870945 0x10c869de 0x19849613 0xdb35d3ed
+ 0xd68ebd6e 0x1056fd48 0xf1a0e305 0xe3982ebd
+ 0x6f7cc391 0x5956374a 0xf414a5a2 0x325119ab
+ 0x99ee1f96 0x6f044bd9 0x8374805b 0xb55c366c
+ 0xa2c77051 0x68f199e5 0xd36a9714 0x878f847b
+ 0xec0394ae 0x86d0584b 0xf4df66b9 0x451cd039
+ 0xf4de06ae 0x35dd0554 0x818a342f 0xeefdbfc9
+ 0x5b4e9edd 0x22d9313a 0x3b710d60 0x6deaeb4c
+ 0xa9e26512 0x98d31867 0x3c2c2d61 0x7eb5ce41
+ 0x40890db6 0x7a3aa660 0x3ef4f306 0x7322881f
+ 0x49dac4d5 0x96efe685 0x27bb7f49 0xbb955283
+ 0x79c5f2b7 0xff599c28 0x28ee7f5e 0x9f324b73
+ 0x45edb7cf 0x39a8b79c 0xd0919c6e 0xe149b29d
+ 0x62f5f82e 0xebcfa23e 0xd4d68937 0x54270090
+ 0x958af0d4 0xa1e4e799 0xaf68ac19 0x82a84f4e
+ 0x50f67b84 0xd5e59629 0xf5fdf24c 0xab1d63c5
+ 0x30835807 0x431fce5f 0xe5f96f4d 0x3f6b4802
+ 0x14010be8 0xdca45ae5 0xc82709af 0xff76ce2c
+ 0x8b222c22 0x73a2d948 0xa8d59cea 0x8c31849e
+ 0x469c2e5f 0x3777ee84 0x5fdfa5da 0x02ef9bb2
+ 0x792d3194 0xbed63f21 0x0b6dc5f1 0xc9d7fe08
+ 0x6df7883d 0x366566cf 0xef772769 0x37826465
+ 0x1cdc3086 0xa69ff7b6 0x235012ea 0x292f7e75
+ 0x30bdd0fd 0xffdc9df1 0x95c6d570 0xec206204
+ 0xc6cd42cb 0xc0d6dfd9 0xb7a16b71 0x17fa527e
+ 0x295f2c79 0x990f9820 0x8b8f447d 0x193f9ad1
+ 0xebddb2af 0x5dd532eb 0xf1bbd8e8 0x3444a3f4
+ 0x18ccce93 0x05edeb4f 0xc4a6b935 0xba37aab0
+ 0x96076ba4 0x250dc2f7 0xc4093548 0x030e777d
+ 0x7ea40933 0x8da7b1dd 0x59c0b79f 0x807d437c
+ 0xf5233ddf 0x54c1983f 0xfc18771b 0xe74b85f0
+ 0xdbd725b5 0x70cdd153 0x4ffe300c 0xfda4bdae
+ 0xf4ac75d2 0x91c4e15a 0x34d92b97 0x16356a79
+ >;
#ifndef _X86_ARCH_GPIO_H_
#define _X86_ARCH_GPIO_H_
-struct ich6_bank_platdata {
- uint32_t base_addr;
- const char *bank_name;
-};
-
#endif /* _X86_ARCH_GPIO_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2014, Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_GPIO_H_
+#define _X86_ARCH_GPIO_H_
+
+#endif /* _X86_ARCH_GPIO_H_ */
--- /dev/null
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/me.h
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ASM_INTEL_ME_H
+#define _ASM_INTEL_ME_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define ME_RETRY 100000 /* 1 second */
+#define ME_DELAY 10 /* 10 us */
+
+/*
+ * Management Engine PCI registers
+ */
+
+#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */
+#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */
+
+#define PCI_ME_HFS 0x40
+#define ME_HFS_CWS_RESET 0
+#define ME_HFS_CWS_INIT 1
+#define ME_HFS_CWS_REC 2
+#define ME_HFS_CWS_NORMAL 5
+#define ME_HFS_CWS_WAIT 6
+#define ME_HFS_CWS_TRANS 7
+#define ME_HFS_CWS_INVALID 8
+#define ME_HFS_STATE_PREBOOT 0
+#define ME_HFS_STATE_M0_UMA 1
+#define ME_HFS_STATE_M3 4
+#define ME_HFS_STATE_M0 5
+#define ME_HFS_STATE_BRINGUP 6
+#define ME_HFS_STATE_ERROR 7
+#define ME_HFS_ERROR_NONE 0
+#define ME_HFS_ERROR_UNCAT 1
+#define ME_HFS_ERROR_IMAGE 3
+#define ME_HFS_ERROR_DEBUG 4
+#define ME_HFS_MODE_NORMAL 0
+#define ME_HFS_MODE_DEBUG 2
+#define ME_HFS_MODE_DIS 3
+#define ME_HFS_MODE_OVER_JMPR 4
+#define ME_HFS_MODE_OVER_MEI 5
+#define ME_HFS_BIOS_DRAM_ACK 1
+#define ME_HFS_ACK_NO_DID 0
+#define ME_HFS_ACK_RESET 1
+#define ME_HFS_ACK_PWR_CYCLE 2
+#define ME_HFS_ACK_S3 3
+#define ME_HFS_ACK_S4 4
+#define ME_HFS_ACK_S5 5
+#define ME_HFS_ACK_GBL_RESET 6
+#define ME_HFS_ACK_CONTINUE 7
+
+struct me_hfs {
+ u32 working_state:4;
+ u32 mfg_mode:1;
+ u32 fpt_bad:1;
+ u32 operation_state:3;
+ u32 fw_init_complete:1;
+ u32 ft_bup_ld_flr:1;
+ u32 update_in_progress:1;
+ u32 error_code:4;
+ u32 operation_mode:4;
+ u32 reserved:4;
+ u32 boot_options_present:1;
+ u32 ack_data:3;
+ u32 bios_msg_ack:4;
+} __packed;
+
+#define PCI_ME_UMA 0x44
+
+struct me_uma {
+ u32 size:6;
+ u32 reserved_1:10;
+ u32 valid:1;
+ u32 reserved_0:14;
+ u32 set_to_one:1;
+} __packed;
+
+#define PCI_ME_H_GS 0x4c
+#define ME_INIT_DONE 1
+#define ME_INIT_STATUS_SUCCESS 0
+#define ME_INIT_STATUS_NOMEM 1
+#define ME_INIT_STATUS_ERROR 2
+
+struct me_did {
+ u32 uma_base:16;
+ u32 reserved:8;
+ u32 status:4;
+ u32 init_done:4;
+} __packed;
+
+#define PCI_ME_GMES 0x48
+#define ME_GMES_PHASE_ROM 0
+#define ME_GMES_PHASE_BUP 1
+#define ME_GMES_PHASE_UKERNEL 2
+#define ME_GMES_PHASE_POLICY 3
+#define ME_GMES_PHASE_MODULE 4
+#define ME_GMES_PHASE_UNKNOWN 5
+#define ME_GMES_PHASE_HOST 6
+
+struct me_gmes {
+ u32 bist_in_prog:1;
+ u32 icc_prog_sts:2;
+ u32 invoke_mebx:1;
+ u32 cpu_replaced_sts:1;
+ u32 mbp_rdy:1;
+ u32 mfs_failure:1;
+ u32 warm_rst_req_for_df:1;
+ u32 cpu_replaced_valid:1;
+ u32 reserved_1:2;
+ u32 fw_upd_ipu:1;
+ u32 reserved_2:4;
+ u32 current_state:8;
+ u32 current_pmevent:4;
+ u32 progress_code:4;
+} __packed;
+
+#define PCI_ME_HERES 0xbc
+#define PCI_ME_EXT_SHA1 0x00
+#define PCI_ME_EXT_SHA256 0x02
+#define PCI_ME_HER(x) (0xc0+(4*(x)))
+
+struct me_heres {
+ u32 extend_reg_algorithm:4;
+ u32 reserved:26;
+ u32 extend_feature_present:1;
+ u32 extend_reg_valid:1;
+} __packed;
+
+/*
+ * Management Engine MEI registers
+ */
+
+#define MEI_H_CB_WW 0x00
+#define MEI_H_CSR 0x04
+#define MEI_ME_CB_RW 0x08
+#define MEI_ME_CSR_HA 0x0c
+
+struct mei_csr {
+ u32 interrupt_enable:1;
+ u32 interrupt_status:1;
+ u32 interrupt_generate:1;
+ u32 ready:1;
+ u32 reset:1;
+ u32 reserved:3;
+ u32 buffer_read_ptr:8;
+ u32 buffer_write_ptr:8;
+ u32 buffer_depth:8;
+} __packed;
+
+#define MEI_ADDRESS_CORE 0x01
+#define MEI_ADDRESS_AMT 0x02
+#define MEI_ADDRESS_RESERVED 0x03
+#define MEI_ADDRESS_WDT 0x04
+#define MEI_ADDRESS_MKHI 0x07
+#define MEI_ADDRESS_ICC 0x08
+#define MEI_ADDRESS_THERMAL 0x09
+
+#define MEI_HOST_ADDRESS 0
+
+struct mei_header {
+ u32 client_address:8;
+ u32 host_address:8;
+ u32 length:9;
+ u32 reserved:6;
+ u32 is_complete:1;
+} __packed;
+
+#define MKHI_GROUP_ID_CBM 0x00
+#define MKHI_GROUP_ID_FWCAPS 0x03
+#define MKHI_GROUP_ID_MDES 0x08
+#define MKHI_GROUP_ID_GEN 0xff
+
+#define MKHI_GLOBAL_RESET 0x0b
+
+#define MKHI_FWCAPS_GET_RULE 0x02
+
+#define MKHI_MDES_ENABLE 0x09
+
+#define MKHI_GET_FW_VERSION 0x02
+#define MKHI_END_OF_POST 0x0c
+#define MKHI_FEATURE_OVERRIDE 0x14
+
+struct mkhi_header {
+ u32 group_id:8;
+ u32 command:7;
+ u32 is_response:1;
+ u32 reserved:8;
+ u32 result:8;
+} __packed;
+
+struct me_fw_version {
+ u16 code_minor;
+ u16 code_major;
+ u16 code_build_number;
+ u16 code_hot_fix;
+ u16 recovery_minor;
+ u16 recovery_major;
+ u16 recovery_build_number;
+ u16 recovery_hot_fix;
+} __packed;
+
+
+#define HECI_EOP_STATUS_SUCCESS 0x0
+#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1
+
+#define CBM_RR_GLOBAL_RESET 0x01
+
+#define GLOBAL_RESET_BIOS_MRC 0x01
+#define GLOBAL_RESET_BIOS_POST 0x02
+#define GLOBAL_RESET_MEBX 0x03
+
+struct me_global_reset {
+ u8 request_origin;
+ u8 reset_type;
+} __packed;
+
+enum me_bios_path {
+ ME_NORMAL_BIOS_PATH,
+ ME_S3WAKE_BIOS_PATH,
+ ME_ERROR_BIOS_PATH,
+ ME_RECOVERY_BIOS_PATH,
+ ME_DISABLE_BIOS_PATH,
+ ME_FIRMWARE_UPDATE_BIOS_PATH,
+};
+
+struct __packed mbp_fw_version_name {
+ u32 major_version:16;
+ u32 minor_version:16;
+ u32 hotfix_version:16;
+ u32 build_version:16;
+};
+
+struct __packed mbp_icc_profile {
+ u8 num_icc_profiles;
+ u8 icc_profile_soft_strap;
+ u8 icc_profile_index;
+ u8 reserved;
+ u32 register_lock_mask[3];
+};
+
+struct __packed mefwcaps_sku {
+ u32 full_net:1;
+ u32 std_net:1;
+ u32 manageability:1;
+ u32 small_business:1;
+ u32 l3manageability:1;
+ u32 intel_at:1;
+ u32 intel_cls:1;
+ u32 reserved:3;
+ u32 intel_mpc:1;
+ u32 icc_over_clocking:1;
+ u32 pavp:1;
+ u32 reserved_1:4;
+ u32 ipv6:1;
+ u32 kvm:1;
+ u32 och:1;
+ u32 vlan:1;
+ u32 tls:1;
+ u32 reserved_4:1;
+ u32 wlan:1;
+ u32 reserved_5:8;
+};
+
+struct __packed tdt_state_flag {
+ u16 lock_state:1;
+ u16 authenticate_module:1;
+ u16 s3authentication:1;
+ u16 flash_wear_out:1;
+ u16 flash_variable_security:1;
+ u16 wwan3gpresent:1;
+ u16 wwan3goob:1;
+ u16 reserved:9;
+};
+
+struct __packed tdt_state_info {
+ u8 state;
+ u8 last_theft_trigger;
+ struct tdt_state_flag flags;
+};
+
+struct __packed platform_type_rule_data {
+ u32 platform_target_usage_type:4;
+ u32 platform_target_market_type:2;
+ u32 super_sku:1;
+ u32 reserved:1;
+ u32 intel_me_fw_image_type:4;
+ u32 platform_brand:4;
+ u32 reserved_1:16;
+};
+
+struct __packed mbp_fw_caps {
+ struct mefwcaps_sku fw_capabilities;
+ u8 available;
+};
+
+struct __packed mbp_rom_bist_data {
+ u16 device_id;
+ u16 fuse_test_flags;
+ u32 umchid[4];
+};
+
+struct __packed mbp_platform_key {
+ u32 key[8];
+};
+
+struct __packed mbp_plat_type {
+ struct platform_type_rule_data rule_data;
+ u8 available;
+};
+
+struct __packed me_bios_payload {
+ struct mbp_fw_version_name fw_version_name;
+ struct mbp_fw_caps fw_caps_sku;
+ struct mbp_rom_bist_data rom_bist_data;
+ struct mbp_platform_key platform_key;
+ struct mbp_plat_type fw_plat_type;
+ struct mbp_icc_profile icc_profile;
+ struct tdt_state_info at_state;
+ u32 mfsintegrity;
+};
+
+struct __packed mbp_header {
+ u32 mbp_size:8;
+ u32 num_entries:8;
+ u32 rsvd:16;
+};
+
+struct __packed mbp_item_header {
+ u32 app_id:8;
+ u32 item_id:8;
+ u32 length:8;
+ u32 rsvd:8;
+};
+
+struct __packed me_fwcaps {
+ u32 id;
+ u8 length;
+ struct mefwcaps_sku caps_sku;
+ u8 reserved[3];
+};
+
+/* Defined in me_status.c for both romstage and ramstage */
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes);
+
+void intel_early_me_status(void);
+int intel_early_me_init(void);
+int intel_early_me_uma_size(void);
+int intel_early_me_init_done(u8 status);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MICROCODE_H
+#define __ASM_ARCH_MICROCODE_H
+
+/**
+ * microcode_update_intel() - Apply microcode updates
+ *
+ * Applies any microcode updates in the device tree.
+ *
+ * @return 0 if OK, -EEXIST if the updates were already applied, -ENOENT if
+ * not updates were found, -EINVAL if an update was invalid
+ */
+int microcode_update_intel(void);
+
+#endif
--- /dev/null
+/*
+ * From Coreboot file of the same name
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ASM_ARCH_MODEL_206AX_H
+#define _ASM_ARCH_MODEL_206AX_H
+
+/* SandyBridge/IvyBridge bus clock is fixed at 100MHz */
+#define SANDYBRIDGE_BCLK 100
+
+#define CPUID_VMX (1 << 5)
+#define CPUID_SMX (1 << 6)
+#define MSR_FEATURE_CONFIG 0x13c
+#define MSR_FLEX_RATIO 0x194
+#define FLEX_RATIO_LOCK (1 << 20)
+#define FLEX_RATIO_EN (1 << 16)
+#define IA32_PLATFORM_DCA_CAP 0x1f8
+#define IA32_MISC_ENABLE 0x1a0
+#define MSR_TEMPERATURE_TARGET 0x1a2
+#define IA32_PERF_CTL 0x199
+#define IA32_THERM_INTERRUPT 0x19b
+#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0
+#define ENERGY_POLICY_PERFORMANCE 0
+#define ENERGY_POLICY_NORMAL 6
+#define ENERGY_POLICY_POWERSAVE 15
+#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2
+#define MSR_LT_LOCK_MEMORY 0x2e7
+#define IA32_MC0_STATUS 0x401
+
+#define MSR_PIC_MSG_CONTROL 0x2e
+#define PLATFORM_INFO_SET_TDP (1 << 29)
+
+#define MSR_MISC_PWR_MGMT 0x1aa
+#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0)
+#define MSR_TURBO_RATIO_LIMIT 0x1ad
+#define MSR_POWER_CTL 0x1fc
+
+#define MSR_PKGC3_IRTL 0x60a
+#define MSR_PKGC6_IRTL 0x60b
+#define MSR_PKGC7_IRTL 0x60c
+#define IRTL_VALID (1 << 15)
+#define IRTL_1_NS (0 << 10)
+#define IRTL_32_NS (1 << 10)
+#define IRTL_1024_NS (2 << 10)
+#define IRTL_32768_NS (3 << 10)
+#define IRTL_1048576_NS (4 << 10)
+#define IRTL_33554432_NS (5 << 10)
+#define IRTL_RESPONSE_MASK (0x3ff)
+
+/* long duration in low dword, short duration in high dword */
+#define PKG_POWER_LIMIT_MASK 0x7fff
+#define PKG_POWER_LIMIT_EN (1 << 15)
+#define PKG_POWER_LIMIT_CLAMP (1 << 16)
+#define PKG_POWER_LIMIT_TIME_SHIFT 17
+#define PKG_POWER_LIMIT_TIME_MASK 0x7f
+
+#define MSR_PP0_CURRENT_CONFIG 0x601
+#define PP0_CURRENT_LIMIT (112 << 3) /* 112 A */
+#define MSR_PP1_CURRENT_CONFIG 0x602
+#define PP1_CURRENT_LIMIT_SNB (35 << 3) /* 35 A */
+#define PP1_CURRENT_LIMIT_IVB (50 << 3) /* 50 A */
+#define MSR_PKG_POWER_SKU_UNIT 0x606
+#define MSR_PKG_POWER_SKU 0x614
+
+#define IVB_CONFIG_TDP_MIN_CPUID 0x306a2
+#define MSR_CONFIG_TDP_NOMINAL 0x648
+#define MSR_CONFIG_TDP_LEVEL1 0x649
+#define MSR_CONFIG_TDP_LEVEL2 0x64a
+#define MSR_CONFIG_TDP_CONTROL 0x64b
+#define MSR_TURBO_ACTIVATION_RATIO 0x64c
+
+/* P-state configuration */
+#define PSS_MAX_ENTRIES 8
+#define PSS_RATIO_STEP 2
+#define PSS_LATENCY_TRANSITION 10
+#define PSS_LATENCY_BUSMASTER 10
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot src/southbridge/intel/bd82x6x/pch.h
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ASM_ARCH_PCH_H
+#define _ASM_ARCH_PCH_H
+
+#include <pci.h>
+
+#define DEFAULT_GPIOBASE 0x0480
+#define DEFAULT_PMBASE 0x0500
+
+#define SMBUS_IO_BASE 0x0400
+
+#define PCH_EHCI1_DEV PCI_BDF(0, 0x1d, 0)
+#define PCH_EHCI2_DEV PCI_BDF(0, 0x1a, 0)
+#define PCH_XHCI_DEV PCI_BDF(0, 0x14, 0)
+#define PCH_ME_DEV PCI_BDF(0, 0x16, 0)
+#define PCH_PCIE_DEV_SLOT 28
+
+#define PCH_DEV PCI_BDF(0, 0, 0)
+#define PCH_VIDEO_DEV PCI_BDF(0, 2, 0)
+
+/* PCI Configuration Space (D31:F0): LPC */
+#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
+
+#define GEN_PMCON_1 0xa0
+#define GEN_PMCON_2 0xa2
+#define GEN_PMCON_3 0xa4
+#define ETR3 0xac
+#define ETR3_CWORWRE (1 << 18)
+#define ETR3_CF9GR (1 << 20)
+
+#define PMBASE 0x40
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0xDC
+#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
+#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
+#define GPIO_ROUT 0xb8
+
+#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
+#define LPC_EN 0x82 /* LPC IF Enables Register */
+#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */
+#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */
+#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */
+#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */
+#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */
+#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */
+#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */
+#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */
+#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */
+#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[3:2] */
+#define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */
+#define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */
+#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */
+#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
+#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
+
+/* PCI Configuration Space (D31:F3): SMBus */
+#define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3)
+#define SMB_BASE 0x20
+#define HOSTC 0x40
+#define SMB_RCV_SLVA 0x09
+
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
+
+/* SMBus I/O bits. */
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
+
+
+/* Root Complex Register Block */
+#define DEFAULT_RCBA 0xfed1c000
+#define RCB_REG(reg) (DEFAULT_RCBA + (reg))
+
+#define PCH_RCBA_BASE 0xf0
+
+#define VCH 0x0000 /* 32bit */
+#define VCAP1 0x0004 /* 32bit */
+#define VCAP2 0x0008 /* 32bit */
+#define PVC 0x000c /* 16bit */
+#define PVS 0x000e /* 16bit */
+
+#define V0CAP 0x0010 /* 32bit */
+#define V0CTL 0x0014 /* 32bit */
+#define V0STS 0x001a /* 16bit */
+
+#define V1CAP 0x001c /* 32bit */
+#define V1CTL 0x0020 /* 32bit */
+#define V1STS 0x0026 /* 16bit */
+
+#define RCTCL 0x0100 /* 32bit */
+#define ESD 0x0104 /* 32bit */
+#define ULD 0x0110 /* 32bit */
+#define ULBA 0x0118 /* 64bit */
+
+#define RP1D 0x0120 /* 32bit */
+#define RP1BA 0x0128 /* 64bit */
+#define RP2D 0x0130 /* 32bit */
+#define RP2BA 0x0138 /* 64bit */
+#define RP3D 0x0140 /* 32bit */
+#define RP3BA 0x0148 /* 64bit */
+#define RP4D 0x0150 /* 32bit */
+#define RP4BA 0x0158 /* 64bit */
+#define HDD 0x0160 /* 32bit */
+#define HDBA 0x0168 /* 64bit */
+#define RP5D 0x0170 /* 32bit */
+#define RP5BA 0x0178 /* 64bit */
+#define RP6D 0x0180 /* 32bit */
+#define RP6BA 0x0188 /* 64bit */
+
+#define RPC 0x0400 /* 32bit */
+#define RPFN 0x0404 /* 32bit */
+
+#define TRSR 0x1e00 /* 8bit */
+#define TRCR 0x1e10 /* 64bit */
+#define TWDR 0x1e18 /* 64bit */
+
+#define IOTR0 0x1e80 /* 64bit */
+#define IOTR1 0x1e88 /* 64bit */
+#define IOTR2 0x1e90 /* 64bit */
+#define IOTR3 0x1e98 /* 64bit */
+
+#define TCTL 0x3000 /* 8bit */
+
+#define NOINT 0
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+#define DIR_IDR 12 /* Interrupt D Pin Offset */
+#define DIR_ICR 8 /* Interrupt C Pin Offset */
+#define DIR_IBR 4 /* Interrupt B Pin Offset */
+#define DIR_IAR 0 /* Interrupt A Pin Offset */
+
+#define PIRQA 0
+#define PIRQB 1
+#define PIRQC 2
+#define PIRQD 3
+#define PIRQE 4
+#define PIRQF 5
+#define PIRQG 6
+#define PIRQH 7
+
+/* IO Buffer Programming */
+#define IOBPIRI 0x2330
+#define IOBPD 0x2334
+#define IOBPS 0x2338
+#define IOBPS_RW_BX ((1 << 9)|(1 << 10))
+#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10))
+#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10))
+
+#define D31IP 0x3100 /* 32bit */
+#define D31IP_TTIP 24 /* Thermal Throttle Pin */
+#define D31IP_SIP2 20 /* SATA Pin 2 */
+#define D31IP_SMIP 12 /* SMBUS Pin */
+#define D31IP_SIP 8 /* SATA Pin */
+#define D30IP 0x3104 /* 32bit */
+#define D30IP_PIP 0 /* PCI Bridge Pin */
+#define D29IP 0x3108 /* 32bit */
+#define D29IP_E1P 0 /* EHCI #1 Pin */
+#define D28IP 0x310c /* 32bit */
+#define D28IP_P8IP 28 /* PCI Express Port 8 */
+#define D28IP_P7IP 24 /* PCI Express Port 7 */
+#define D28IP_P6IP 20 /* PCI Express Port 6 */
+#define D28IP_P5IP 16 /* PCI Express Port 5 */
+#define D28IP_P4IP 12 /* PCI Express Port 4 */
+#define D28IP_P3IP 8 /* PCI Express Port 3 */
+#define D28IP_P2IP 4 /* PCI Express Port 2 */
+#define D28IP_P1IP 0 /* PCI Express Port 1 */
+#define D27IP 0x3110 /* 32bit */
+#define D27IP_ZIP 0 /* HD Audio Pin */
+#define D26IP 0x3114 /* 32bit */
+#define D26IP_E2P 0 /* EHCI #2 Pin */
+#define D25IP 0x3118 /* 32bit */
+#define D25IP_LIP 0 /* GbE LAN Pin */
+#define D22IP 0x3124 /* 32bit */
+#define D22IP_KTIP 12 /* KT Pin */
+#define D22IP_IDERIP 8 /* IDE-R Pin */
+#define D22IP_MEI2IP 4 /* MEI #2 Pin */
+#define D22IP_MEI1IP 0 /* MEI #1 Pin */
+#define D20IP 0x3128 /* 32bit */
+#define D20IP_XHCIIP 0
+#define D31IR 0x3140 /* 16bit */
+#define D30IR 0x3142 /* 16bit */
+#define D29IR 0x3144 /* 16bit */
+#define D28IR 0x3146 /* 16bit */
+#define D27IR 0x3148 /* 16bit */
+#define D26IR 0x314c /* 16bit */
+#define D25IR 0x3150 /* 16bit */
+#define D22IR 0x315c /* 16bit */
+#define D20IR 0x3160 /* 16bit */
+#define OIC 0x31fe /* 16bit */
+
+#define SPI_FREQ_SWSEQ 0x3893
+#define SPI_DESC_COMP0 0x38b0
+#define SPI_FREQ_WR_ERA 0x38b4
+#define SOFT_RESET_CTRL 0x38f4
+#define SOFT_RESET_DATA 0x38f8
+
+#define DIR_ROUTE(a, b, c, d) \
+ (((d) << DIR_IDR) | ((c) << DIR_ICR) | \
+ ((b) << DIR_IBR) | ((a) << DIR_IAR))
+
+#define RC 0x3400 /* 32bit */
+#define HPTC 0x3404 /* 32bit */
+#define GCS 0x3410 /* 32bit */
+#define BUC 0x3414 /* 32bit */
+#define PCH_DISABLE_GBE (1 << 5)
+#define FD 0x3418 /* 32bit */
+#define DISPBDF 0x3424 /* 16bit */
+#define FD2 0x3428 /* 32bit */
+#define CG 0x341c /* 32bit */
+
+/* Function Disable 1 RCBA 0x3418 */
+#define PCH_DISABLE_ALWAYS ((1 << 0)|(1 << 26))
+#define PCH_DISABLE_P2P (1 << 1)
+#define PCH_DISABLE_SATA1 (1 << 2)
+#define PCH_DISABLE_SMBUS (1 << 3)
+#define PCH_DISABLE_HD_AUDIO (1 << 4)
+#define PCH_DISABLE_EHCI2 (1 << 13)
+#define PCH_DISABLE_LPC (1 << 14)
+#define PCH_DISABLE_EHCI1 (1 << 15)
+#define PCH_DISABLE_PCIE(x) (1 << (16 + x))
+#define PCH_DISABLE_THERMAL (1 << 24)
+#define PCH_DISABLE_SATA2 (1 << 25)
+#define PCH_DISABLE_XHCI (1 << 27)
+
+/* Function Disable 2 RCBA 0x3428 */
+#define PCH_DISABLE_KT (1 << 4)
+#define PCH_DISABLE_IDER (1 << 3)
+#define PCH_DISABLE_MEI2 (1 << 2)
+#define PCH_DISABLE_MEI1 (1 << 1)
+#define PCH_ENABLE_DBDF (1 << 0)
+
+/* ICH7 GPIOBASE */
+#define GPIO_USE_SEL 0x00
+#define GP_IO_SEL 0x04
+#define GP_LVL 0x0c
+#define GPO_BLINK 0x18
+#define GPI_INV 0x2c
+#define GPIO_USE_SEL2 0x30
+#define GP_IO_SEL2 0x34
+#define GP_LVL2 0x38
+#define GPIO_USE_SEL3 0x40
+#define GP_IO_SEL3 0x44
+#define GP_LVL3 0x48
+#define GP_RST_SEL1 0x60
+#define GP_RST_SEL2 0x64
+#define GP_RST_SEL3 0x68
+
+/* ICH7 PMBASE */
+#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define BM_STS (1 << 4)
+#define TMROF_STS (1 << 0)
+#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define PM1_CNT 0x04
+#define SLP_EN (1 << 13)
+#define SLP_TYP (7 << 10)
+#define SLP_TYP_S0 0
+#define SLP_TYP_S1 1
+#define SLP_TYP_S3 5
+#define SLP_TYP_S4 6
+#define SLP_TYP_S5 7
+#define GBL_RLS (1 << 2)
+#define BM_RLD (1 << 1)
+#define SCI_EN (1 << 0)
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x50 /* mobile only */
+#define GPE0_STS 0x20
+#define PME_B0_STS (1 << 13)
+#define PME_STS (1 << 11)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define RI_STS (1 << 8)
+#define SMB_WAK_STS (1 << 7)
+#define TCOSCI_STS (1 << 6)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define GPE0_EN 0x28
+#define PME_B0_EN (1 << 13)
+#define PME_EN (1 << 11)
+#define TCOSCI_EN (1 << 6)
+#define SMI_EN 0x30
+#define INTEL_USB2_EN (1 << 18) /* Intel-Specific USB2 SMI logic */
+#define LEGACY_USB2_EN (1 << 17) /* Legacy USB2 SMI logic */
+#define PERIODIC_EN (1 << 14) /* SMI on PERIODIC_STS in SMI_STS */
+#define TCO_EN (1 << 13) /* Enable TCO Logic (BIOSWE et al) */
+#define MCSMI_EN (1 << 11) /* Trap microcontroller range access */
+#define BIOS_RLS (1 << 7) /* asserts SCI on bit set */
+#define SWSMI_TMR_EN (1 << 6) /* start software smi timer on bit set */
+#define APMC_EN (1 << 5) /* Writes to APM_CNT cause SMI# */
+#define SLP_SMI_EN (1 << 4) /* Write SLP_EN in PM1_CNT asserts SMI# */
+#define LEGACY_USB_EN (1 << 3) /* Legacy USB circuit SMI logic */
+#define BIOS_EN (1 << 2) /* Assert SMI# on setting GBL_RLS bit */
+#define EOS (1 << 1) /* End of SMI (deassert SMI#) */
+#define GBL_SMI_EN (1 << 0) /* SMI# generation at all? */
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+#define TCO1_STS 0x64
+#define DMISCI_STS (1 << 9)
+#define TCO2_STS 0x66
+
+/**
+ * lpc_early_init() - set up LPC serial ports and other early things
+ *
+ * @blob: Device tree blob
+ * @node: Offset of LPC node
+ * @dev: PCH PCI device containing the LPC
+ * @return 0 if OK, -ve on error
+ */
+int lpc_early_init(const void *blob, int node, pci_dev_t dev);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011, Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef ASM_ARCH_PEI_DATA_H
+#define ASM_ARCH_PEI_DATA_H
+
+struct pch_usb3_controller_settings {
+ /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
+ uint16_t mode;
+ /* 4 bit mask, 1: switchable, 0: not switchable */
+ uint16_t hs_port_switch_mask;
+ /* 0: No xHCI preOS driver, 1: xHCI preOS driver */
+ uint16_t preboot_support;
+ /* 0: Disable, 1: Enable */
+ uint16_t xhci_streams;
+};
+
+typedef asmlinkage void (*tx_byte_func)(unsigned char byte);
+
+#define PEI_VERSION 6
+
+struct __packed pei_data {
+ uint32_t pei_version;
+ uint32_t mchbar;
+ uint32_t dmibar;
+ uint32_t epbar;
+ uint32_t pciexbar;
+ uint16_t smbusbar;
+ uint32_t wdbbar;
+ uint32_t wdbsize;
+ uint32_t hpet_address;
+ uint32_t rcba;
+ uint32_t pmbase;
+ uint32_t gpiobase;
+ uint32_t thermalbase;
+ uint32_t system_type; /* 0 Mobile, 1 Desktop/Server */
+ uint32_t tseg_size;
+ uint8_t spd_addresses[4];
+ uint8_t ts_addresses[4];
+ int boot_mode;
+ int ec_present;
+ int gbe_enable;
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ int dimm_channel0_disabled;
+ int dimm_channel1_disabled;
+ /* Seed values saved in CMOS */
+ uint32_t scrambler_seed;
+ uint32_t scrambler_seed_s3;
+ /* Data read from flash and passed into MRC */
+ unsigned char *mrc_input;
+ unsigned int mrc_input_len;
+ /* Data from MRC that should be saved to flash */
+ unsigned char *mrc_output;
+ unsigned int mrc_output_len;
+ /*
+ * Max frequency DDR3 could be ran at. Could be one of four values:
+ * 800, 1067, 1333, 1600
+ */
+ uint32_t max_ddr3_freq;
+ /*
+ * USB Port Configuration:
+ * [0] = enable
+ * [1] = overcurrent pin
+ * [2] = length
+ *
+ * Ports 0-7 can be mapped to OC0-OC3
+ * Ports 8-13 can be mapped to OC4-OC7
+ *
+ * Port Length
+ * MOBILE:
+ * < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
+ * < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
+ * DESKTOP:
+ * < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
+ * < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
+ * < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
+ */
+ uint16_t usb_port_config[16][3];
+ /* See the usb3 struct above for details */
+ struct pch_usb3_controller_settings usb3;
+ /*
+ * SPD data array for onboard RAM. Specify address 0xf0,
+ * 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
+ * spd_address for a given "DIMM".
+ */
+ uint8_t spd_data[4][256];
+ tx_byte_func tx_byte;
+ int ddr3lv_support;
+ /*
+ * pcie_init needs to be set to 1 to have the system agent initialise
+ * PCIe. Note: This should only be required if your system has Gen3
+ * devices and it will increase your boot time by at least 100ms.
+ */
+ int pcie_init;
+ /*
+ * N mode functionality. Leave this setting at 0.
+ * 0 Auto
+ * 1 1N
+ * 2 2N
+ */
+ int nmode;
+ /*
+ * DDR refresh rate config. JEDEC Standard No.21-C Annex K allows
+ * for DIMM SPD data to specify whether double-rate is required for
+ * extended operating temperature range.
+ * 0 Enable double rate based upon temperature thresholds
+ * 1 Normal rate
+ * 2 Always enable double rate
+ */
+ int ddr_refresh_rate_config;
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot file of the same name
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ACH_ASM_SANDYBRIDGE_H
+#define _ACH_ASM_SANDYBRIDGE_H
+
+/* Chipset types */
+#define SANDYBRIDGE_MOBILE 0
+#define SANDYBRIDGE_DESKTOP 1
+#define SANDYBRIDGE_SERVER 2
+
+/* Device ID for SandyBridge and IvyBridge */
+#define BASE_REV_SNB 0x00
+#define BASE_REV_IVB 0x50
+#define BASE_REV_MASK 0x50
+
+/* SandyBridge CPU stepping */
+#define SNB_STEP_D0 (BASE_REV_SNB + 5) /* Also J0 */
+#define SNB_STEP_D1 (BASE_REV_SNB + 6)
+#define SNB_STEP_D2 (BASE_REV_SNB + 7) /* Also J1/Q0 */
+
+/* IvyBridge CPU stepping */
+#define IVB_STEP_A0 (BASE_REV_IVB + 0)
+#define IVB_STEP_B0 (BASE_REV_IVB + 2)
+#define IVB_STEP_C0 (BASE_REV_IVB + 4)
+#define IVB_STEP_K0 (BASE_REV_IVB + 5)
+#define IVB_STEP_D0 (BASE_REV_IVB + 6)
+
+/* Intel Enhanced Debug region must be 4MB */
+#define IED_SIZE 0x400000
+
+/* Northbridge BARs */
+#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */
+#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */
+#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */
+#define DEFAULT_RCBABASE 0xfed1c000
+/* 4 KB per PCIe device */
+#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS
+
+/* Device 0:0.0 PCI configuration space (Host Bridge) */
+#define EPBAR 0x40
+#define MCHBAR 0x48
+#define PCIEXBAR 0x60
+#define DMIBAR 0x68
+#define X60BAR 0x60
+
+#define GGC 0x50 /* GMCH Graphics Control */
+
+#define DEVEN 0x54 /* Device Enable */
+#define DEVEN_PEG60 (1 << 13)
+#define DEVEN_IGD (1 << 4)
+#define DEVEN_PEG10 (1 << 3)
+#define DEVEN_PEG11 (1 << 2)
+#define DEVEN_PEG12 (1 << 1)
+#define DEVEN_HOST (1 << 0)
+
+#define PAM0 0x80
+#define PAM1 0x81
+#define PAM2 0x82
+#define PAM3 0x83
+#define PAM4 0x84
+#define PAM5 0x85
+#define PAM6 0x86
+
+#define LAC 0x87 /* Legacy Access Control */
+#define SMRAM 0x88 /* System Management RAM Control */
+#define D_OPEN (1 << 6)
+#define D_CLS (1 << 5)
+#define D_LCK (1 << 4)
+#define G_SMRAME (1 << 3)
+#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
+
+#define TOM 0xa0
+#define TOUUD 0xa8 /* Top of Upper Usable DRAM */
+#define TSEG 0xb8 /* TSEG base */
+#define TOLUD 0xbc /* Top of Low Used Memory */
+
+#define SKPAD 0xdc /* Scratchpad Data */
+
+/* Device 0:1.0 PCI configuration space (PCI Express) */
+#define BCTRL1 0x3e /* 16bit */
+
+/* Device 0:2.0 PCI configuration space (Graphics Device) */
+
+#define MSAC 0x62 /* Multi Size Aperture Control */
+#define SWSCI 0xe8 /* SWSCI enable */
+#define ASLS 0xfc /* OpRegion Base */
+
+/*
+ * MCHBAR
+ */
+#define MCHBAR_REG(reg) (DEFAULT_RCBA + (reg))
+
+#define SSKPD 0x5d14 /* 16bit (scratchpad) */
+#define BIOS_RESET_CPL 0x5da8 /* 8bit */
+
+void report_platform_info(void);
+
+void sandybridge_early_init(int chipset_type);
+
+#endif
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+#define asmlinkage __attribute__((regparm(0)))
#endif
/*
* Copyright (c) 2014 The Chromium OS Authors.
*
+ * Part of this file is adapted from coreboot
+ * src/arch/x86/include/arch/cpu.h and
+ * src/arch/x86/lib/cpu.c
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __X86_CPU_H
-#define __X86_CPU_H
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+enum {
+ X86_VENDOR_INVALID = 0,
+ X86_VENDOR_INTEL,
+ X86_VENDOR_CYRIX,
+ X86_VENDOR_AMD,
+ X86_VENDOR_UMC,
+ X86_VENDOR_NEXGEN,
+ X86_VENDOR_CENTAUR,
+ X86_VENDOR_RISE,
+ X86_VENDOR_TRANSMETA,
+ X86_VENDOR_NSC,
+ X86_VENDOR_SIS,
+ X86_VENDOR_ANY = 0xfe,
+ X86_VENDOR_UNKNOWN = 0xff
+};
+
+struct cpuid_result {
+ uint32_t eax;
+ uint32_t ebx;
+ uint32_t ecx;
+ uint32_t edx;
+};
+
+/*
+ * Generic CPUID function
+ */
+static inline struct cpuid_result cpuid(int op)
+{
+ struct cpuid_result result;
+ asm volatile(
+ "mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%ebx, %%esi;"
+ "mov %%edi, %%ebx;"
+ : "=a" (result.eax),
+ "=S" (result.ebx),
+ "=c" (result.ecx),
+ "=d" (result.edx)
+ : "0" (op)
+ : "edi");
+ return result;
+}
+
+/*
+ * Generic Extended CPUID function
+ */
+static inline struct cpuid_result cpuid_ext(int op, unsigned ecx)
+{
+ struct cpuid_result result;
+ asm volatile(
+ "mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%ebx, %%esi;"
+ "mov %%edi, %%ebx;"
+ : "=a" (result.eax),
+ "=S" (result.ebx),
+ "=c" (result.ecx),
+ "=d" (result.edx)
+ : "0" (op), "2" (ecx)
+ : "edi");
+ return result;
+}
+
+/*
+ * CPUID functions returning a single datum
+ */
+static inline unsigned int cpuid_eax(unsigned int op)
+{
+ unsigned int eax;
+
+ __asm__("mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%edi, %%ebx;"
+ : "=a" (eax)
+ : "0" (op)
+ : "ecx", "edx", "edi");
+ return eax;
+}
+
+static inline unsigned int cpuid_ebx(unsigned int op)
+{
+ unsigned int eax, ebx;
+
+ __asm__("mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%ebx, %%esi;"
+ "mov %%edi, %%ebx;"
+ : "=a" (eax), "=S" (ebx)
+ : "0" (op)
+ : "ecx", "edx", "edi");
+ return ebx;
+}
+
+static inline unsigned int cpuid_ecx(unsigned int op)
+{
+ unsigned int eax, ecx;
- /**
+ __asm__("mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%edi, %%ebx;"
+ : "=a" (eax), "=c" (ecx)
+ : "0" (op)
+ : "edx", "edi");
+ return ecx;
+}
+
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+ unsigned int eax, edx;
+
+ __asm__("mov %%ebx, %%edi;"
+ "cpuid;"
+ "mov %%edi, %%ebx;"
+ : "=a" (eax), "=d" (edx)
+ : "0" (op)
+ : "ecx", "edi");
+ return edx;
+}
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(uint32_t flag)
+{
+ uint32_t f1, f2;
+
+ asm(
+ "pushfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "movl %0,%1\n\t"
+ "xorl %2,%0\n\t"
+ "pushl %0\n\t"
+ "popfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "popfl\n\t"
+ : "=&r" (f1), "=&r" (f2)
+ : "ir" (flag));
+ return ((f1^f2) & flag) != 0;
+}
+
+/**
* cpu_enable_paging_pae() - Enable PAE-paging
*
- * @pdpt: Value to set in cr3 (PDPT or PML4T)
+ * @cr3: Value to set in cr3 (PDPT or PML4T)
*/
void cpu_enable_paging_pae(ulong cr3);
*/
int cpu_has_64bit(void);
+/**
+ * cpu_vendor_name() - Get CPU vendor name
+ *
+ * @vendor: CPU vendor enumeration number
+ *
+ * @return: Address to hold the CPU vendor name string
+ */
+const char *cpu_vendor_name(int vendor);
+
+#define CPU_MAX_NAME_LEN 49
+
+/**
+ * cpu_get_name() - Get the name of the current cpu
+ *
+ * @name: Place to put name, which must be CPU_MAX_NAME_LEN bytes including
+ * @return pointer to name, which will likely be a few bytes after the start
+ * of @name
+ * \0 terminator
+ */
+char *cpu_get_name(char *name);
+
/**
* cpu_call64() - Jump to a 64-bit Linux kernel (internal function)
*
#ifndef __ASSEMBLY__
+enum pei_boot_mode_t {
+ PEI_BOOT_NONE = 0,
+ PEI_BOOT_SOFT_RESET,
+ PEI_BOOT_RESUME,
+
+};
+
+struct memory_area {
+ uint64_t start;
+ uint64_t size;
+};
+
+struct memory_info {
+ int num_areas;
+ uint64_t total_memory;
+ uint64_t total_32bit_memory;
+ struct memory_area area[CONFIG_NR_DRAM_BANKS];
+};
+
/* Architecture-specific global data */
struct arch_global_data {
struct global_data *gd_addr; /* Location of Global Data */
+ uint8_t x86; /* CPU family */
+ uint8_t x86_vendor; /* CPU vendor */
+ uint8_t x86_model;
+ uint8_t x86_mask;
+ uint32_t x86_device;
uint64_t tsc_base; /* Initial value returned by rdtsc() */
uint32_t tsc_base_kclocks; /* Initial tsc as a kclocks value */
uint32_t tsc_prev; /* For show_boot_progress() */
+ uint32_t tsc_mhz; /* TSC frequency in MHz */
void *new_fdt; /* Relocated FDT */
+ uint32_t bist; /* Built-in self test value */
+ struct pci_controller *hose; /* PCI hose for early use */
+ enum pei_boot_mode_t pei_boot_mode;
+ const struct pch_gpio_map *gpio_map; /* board GPIO map */
+ struct memory_info meminfo; /* Memory information */
};
#endif
/*
* Copyright (c) 2012, Google Inc. All rights reserved.
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _X86_GPIO_H_
#define _X86_GPIO_H_
+#include <linux/compiler.h>
#include <asm/arch/gpio.h>
#include <asm-generic/gpio.h>
+struct ich6_bank_platdata {
+ uint32_t base_addr;
+ const char *bank_name;
+};
+
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+#define GPIO_MODE_NONE 1
+
+#define GPIO_DIR_OUTPUT 0
+#define GPIO_DIR_INPUT 1
+
+#define GPIO_NO_INVERT 0
+#define GPIO_INVERT 1
+
+#define GPIO_LEVEL_LOW 0
+#define GPIO_LEVEL_HIGH 1
+
+#define GPIO_NO_BLINK 0
+#define GPIO_BLINK 1
+
+#define GPIO_RESET_PWROK 0
+#define GPIO_RESET_RSMRST 1
+
+struct pch_gpio_set1 {
+ u32 gpio0:1;
+ u32 gpio1:1;
+ u32 gpio2:1;
+ u32 gpio3:1;
+ u32 gpio4:1;
+ u32 gpio5:1;
+ u32 gpio6:1;
+ u32 gpio7:1;
+ u32 gpio8:1;
+ u32 gpio9:1;
+ u32 gpio10:1;
+ u32 gpio11:1;
+ u32 gpio12:1;
+ u32 gpio13:1;
+ u32 gpio14:1;
+ u32 gpio15:1;
+ u32 gpio16:1;
+ u32 gpio17:1;
+ u32 gpio18:1;
+ u32 gpio19:1;
+ u32 gpio20:1;
+ u32 gpio21:1;
+ u32 gpio22:1;
+ u32 gpio23:1;
+ u32 gpio24:1;
+ u32 gpio25:1;
+ u32 gpio26:1;
+ u32 gpio27:1;
+ u32 gpio28:1;
+ u32 gpio29:1;
+ u32 gpio30:1;
+ u32 gpio31:1;
+} __packed;
+
+struct pch_gpio_set2 {
+ u32 gpio32:1;
+ u32 gpio33:1;
+ u32 gpio34:1;
+ u32 gpio35:1;
+ u32 gpio36:1;
+ u32 gpio37:1;
+ u32 gpio38:1;
+ u32 gpio39:1;
+ u32 gpio40:1;
+ u32 gpio41:1;
+ u32 gpio42:1;
+ u32 gpio43:1;
+ u32 gpio44:1;
+ u32 gpio45:1;
+ u32 gpio46:1;
+ u32 gpio47:1;
+ u32 gpio48:1;
+ u32 gpio49:1;
+ u32 gpio50:1;
+ u32 gpio51:1;
+ u32 gpio52:1;
+ u32 gpio53:1;
+ u32 gpio54:1;
+ u32 gpio55:1;
+ u32 gpio56:1;
+ u32 gpio57:1;
+ u32 gpio58:1;
+ u32 gpio59:1;
+ u32 gpio60:1;
+ u32 gpio61:1;
+ u32 gpio62:1;
+ u32 gpio63:1;
+} __packed;
+
+struct pch_gpio_set3 {
+ u32 gpio64:1;
+ u32 gpio65:1;
+ u32 gpio66:1;
+ u32 gpio67:1;
+ u32 gpio68:1;
+ u32 gpio69:1;
+ u32 gpio70:1;
+ u32 gpio71:1;
+ u32 gpio72:1;
+ u32 gpio73:1;
+ u32 gpio74:1;
+ u32 gpio75:1;
+} __packed;
+
+/*
+ * This hilariously complex structure came from Coreboot. The
+ * setup_pch_gpios() function uses it. It could be move to device tree, or
+ * adjust to use masks instead of bitfields.
+ */
+struct pch_gpio_map {
+ struct {
+ const struct pch_gpio_set1 *mode;
+ const struct pch_gpio_set1 *direction;
+ const struct pch_gpio_set1 *level;
+ const struct pch_gpio_set1 *reset;
+ const struct pch_gpio_set1 *invert;
+ const struct pch_gpio_set1 *blink;
+ } set1;
+ struct {
+ const struct pch_gpio_set2 *mode;
+ const struct pch_gpio_set2 *direction;
+ const struct pch_gpio_set2 *level;
+ const struct pch_gpio_set2 *reset;
+ } set2;
+ struct {
+ const struct pch_gpio_set3 *mode;
+ const struct pch_gpio_set3 *direction;
+ const struct pch_gpio_set3 *level;
+ const struct pch_gpio_set3 *reset;
+ } set3;
+};
+
+void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
+
#endif /* _X86_GPIO_H_ */
#define PIT_CMD_MODE4 0x08 /* Select mode 4 */
#define PIT_CMD_MODE5 0x0A /* Select mode 5 */
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
#endif
int init_cache_f_r(void);
int init_bd_struct_r(void);
int init_func_spi(void);
-int find_fdt(void);
-int prepare_fdt(void);
#endif /* !_INIT_HELPERS_H_ */
#define memcpy_fromio(a,b,c) memcpy((a),(b),(c))
#define memcpy_toio(a,b,c) memcpy((a),(b),(c))
+#define write_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
+#define read_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
+
+#define write_le64(a, v) write_arch(q, le64, a, v)
+#define write_le32(a, v) write_arch(l, le32, a, v)
+#define write_le16(a, v) write_arch(w, le16, a, v)
+
+#define read_le64(a) read_arch(q, le64, a)
+#define read_le32(a) read_arch(l, le32, a)
+#define read_le16(a) read_arch(w, le16, a)
+
+#define write_be32(a, v) write_arch(l, be32, a, v)
+#define write_be16(a, v) write_arch(w, be16, a, v)
+
+#define read_be32(a) read_arch(l, be32, a)
+#define read_be16(a) read_arch(w, be16, a)
+
+#define write_8(a, v) __raw_writeb(v, a)
+#define read_8(a) __raw_readb(a)
+
+#define clrbits(type, addr, clear) \
+ write_##type((addr), read_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ write_##type((addr), read_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ write_##type((addr), (read_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
/*
* ISA space is 'always mapped' on a typical x86 system, no need to
* explicitly ioremap() it. The fact that the ISA IO space is mapped
--- /dev/null
+/*
+ * From Coreboot file of same name
+ *
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ARCH_ASM_LAPIC_H
+#define _ARCH_ASM_LAPIC_H
+
+#include <asm/io.h>
+#include <asm/lapic_def.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+static inline __attribute__((always_inline))
+ unsigned long lapic_read(unsigned long reg)
+{
+ return readl(LAPIC_DEFAULT_BASE + reg);
+}
+
+static inline __attribute__((always_inline))
+ void lapic_write(unsigned long reg, unsigned long val)
+{
+ writel(val, LAPIC_DEFAULT_BASE + reg);
+}
+
+static inline __attribute__((always_inline)) void lapic_wait_icr_idle(void)
+{
+ do { } while (lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY);
+}
+
+static inline void enable_lapic(void)
+{
+ msr_t msr;
+
+ msr = msr_read(LAPIC_BASE_MSR);
+ msr.hi &= 0xffffff00;
+ msr.lo &= 0x000007ff;
+ msr.lo |= LAPIC_DEFAULT_BASE | (1 << 11);
+ msr_write(LAPIC_BASE_MSR, msr);
+}
+
+static inline void disable_lapic(void)
+{
+ msr_t msr;
+
+ msr = msr_read(LAPIC_BASE_MSR);
+ msr.lo &= ~(1 << 11);
+ msr_write(LAPIC_BASE_MSR, msr);
+}
+
+static inline __attribute__((always_inline)) unsigned long lapicid(void)
+{
+ return lapic_read(LAPIC_ID) >> 24;
+}
+
+#endif
--- /dev/null
+/*
+ * Taken from the Coreboot file of the same name
+ *
+ * (C) Copyright 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ASM_LAPIC_DEF_H
+#define _ASM_LAPIC_DEF_H
+
+#define LAPIC_BASE_MSR 0x1B
+#define LAPIC_BASE_MSR_BOOTSTRAP_PROCESSOR (1 << 8)
+#define LAPIC_BASE_MSR_ENABLE (1 << 11)
+#define LAPIC_BASE_MSR_ADDR_MASK 0xFFFFF000
+
+#define LOCAL_APIC_ADDR 0xfee00000
+#define LAPIC_DEFAULT_BASE LOCAL_APIC_ADDR
+
+#define LAPIC_ID 0x020
+#define LAPIC_LVR 0x030
+#define LAPIC_TASKPRI 0x80
+#define LAPIC_TPRI_MASK 0xFF
+#define LAPIC_ARBID 0x090
+#define LAPIC_RRR 0x0C0
+#define LAPIC_SVR 0x0f0
+#define LAPIC_SPIV 0x0f0
+#define LAPIC_SPIV_ENABLE 0x100
+#define LAPIC_ESR 0x280
+#define LAPIC_ESR_SEND_CS 0x00001
+#define LAPIC_ESR_RECV_CS 0x00002
+#define LAPIC_ESR_SEND_ACC 0x00004
+#define LAPIC_ESR_RECV_ACC 0x00008
+#define LAPIC_ESR_SENDILL 0x00020
+#define LAPIC_ESR_RECVILL 0x00040
+#define LAPIC_ESR_ILLREGA 0x00080
+#define LAPIC_ICR 0x300
+#define LAPIC_DEST_SELF 0x40000
+#define LAPIC_DEST_ALLINC 0x80000
+#define LAPIC_DEST_ALLBUT 0xC0000
+#define LAPIC_ICR_RR_MASK 0x30000
+#define LAPIC_ICR_RR_INVALID 0x00000
+#define LAPIC_ICR_RR_INPROG 0x10000
+#define LAPIC_ICR_RR_VALID 0x20000
+#define LAPIC_INT_LEVELTRIG 0x08000
+#define LAPIC_INT_ASSERT 0x04000
+#define LAPIC_ICR_BUSY 0x01000
+#define LAPIC_DEST_LOGICAL 0x00800
+#define LAPIC_DM_FIXED 0x00000
+#define LAPIC_DM_LOWEST 0x00100
+#define LAPIC_DM_SMI 0x00200
+#define LAPIC_DM_REMRD 0x00300
+#define LAPIC_DM_NMI 0x00400
+#define LAPIC_DM_INIT 0x00500
+#define LAPIC_DM_STARTUP 0x00600
+#define LAPIC_DM_EXTINT 0x00700
+#define LAPIC_VECTOR_MASK 0x000FF
+#define LAPIC_ICR2 0x310
+#define GET_LAPIC_DEST_FIELD(x) (((x) >> 24) & 0xFF)
+#define SET_LAPIC_DEST_FIELD(x) ((x) << 24)
+#define LAPIC_LVTT 0x320
+#define LAPIC_LVTPC 0x340
+#define LAPIC_LVT0 0x350
+#define LAPIC_LVT_TIMER_BASE_MASK (0x3 << 18)
+#define GET_LAPIC_TIMER_BASE(x) (((x) >> 18) & 0x3)
+#define SET_LAPIC_TIMER_BASE(x) (((x) << 18))
+#define LAPIC_TIMER_BASE_CLKIN 0x0
+#define LAPIC_TIMER_BASE_TMBASE 0x1
+#define LAPIC_TIMER_BASE_DIV 0x2
+#define LAPIC_LVT_TIMER_PERIODIC (1 << 17)
+#define LAPIC_LVT_MASKED (1 << 16)
+#define LAPIC_LVT_LEVEL_TRIGGER (1 << 15)
+#define LAPIC_LVT_REMOTE_IRR (1 << 14)
+#define LAPIC_INPUT_POLARITY (1 << 13)
+#define LAPIC_SEND_PENDING (1 << 12)
+#define LAPIC_LVT_RESERVED_1 (1 << 11)
+#define LAPIC_DELIVERY_MODE_MASK (7 << 8)
+#define LAPIC_DELIVERY_MODE_FIXED (0 << 8)
+#define LAPIC_DELIVERY_MODE_NMI (4 << 8)
+#define LAPIC_DELIVERY_MODE_EXTINT (7 << 8)
+#define GET_LAPIC_DELIVERY_MODE(x) (((x) >> 8) & 0x7)
+#define SET_LAPIC_DELIVERY_MODE(x, y) (((x) & ~0x700)|((y) << 8))
+#define LAPIC_MODE_FIXED 0x0
+#define LAPIC_MODE_NMI 0x4
+#define LAPIC_MODE_EXINT 0x7
+#define LAPIC_LVT1 0x360
+#define LAPIC_LVTERR 0x370
+#define LAPIC_TMICT 0x380
+#define LAPIC_TMCCT 0x390
+#define LAPIC_TDCR 0x3E0
+#define LAPIC_TDR_DIV_TMBASE (1 << 2)
+#define LAPIC_TDR_DIV_1 0xB
+#define LAPIC_TDR_DIV_2 0x0
+#define LAPIC_TDR_DIV_4 0x1
+#define LAPIC_TDR_DIV_8 0x2
+#define LAPIC_TDR_DIV_16 0x3
+#define LAPIC_TDR_DIV_32 0x8
+#define LAPIC_TDR_DIV_64 0x9
+#define LAPIC_TDR_DIV_128 0xA
+
+#endif
return native_wrmsr_safe_regs(regs);
}
+typedef struct msr_t {
+ uint32_t lo;
+ uint32_t hi;
+} msr_t;
+
+static inline struct msr_t msr_read(unsigned msr_num)
+{
+ struct msr_t msr;
+
+ rdmsr(msr_num, msr.lo, msr.hi);
+
+ return msr;
+}
+
+static inline void msr_write(unsigned msr_num, msr_t msr)
+{
+ wrmsr(msr_num, msr.lo, msr.hi);
+}
+
#define rdtscl(low) \
((low) = (u32)__native_read_tsc())
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot file of the same name
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_MTRR_H
+#define _ASM_MTRR_H
+
+/* These are the region types */
+#define MTRR_TYPE_UNCACHEABLE 0
+#define MTRR_TYPE_WRCOMB 1
+/*#define MTRR_TYPE_ 2*/
+/*#define MTRR_TYPE_ 3*/
+#define MTRR_TYPE_WRTHROUGH 4
+#define MTRR_TYPE_WRPROT 5
+#define MTRR_TYPE_WRBACK 6
+#define MTRR_NUM_TYPES 7
+
+#define MTRRcap_MSR 0x0fe
+#define MTRRdefType_MSR 0x2ff
+
+#define MTRRdefTypeEn (1 << 11)
+#define MTRRdefTypeFixEn (1 << 10)
+
+#define SMRRphysBase_MSR 0x1f2
+#define SMRRphysMask_MSR 0x1f3
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define MTRRphysMaskValid (1 << 11)
+
+#define NUM_FIXED_RANGES 88
+#define RANGES_PER_FIXED_MTRR 8
+#define MTRRfix64K_00000_MSR 0x250
+#define MTRRfix16K_80000_MSR 0x258
+#define MTRRfix16K_A0000_MSR 0x259
+#define MTRRfix4K_C0000_MSR 0x268
+#define MTRRfix4K_C8000_MSR 0x269
+#define MTRRfix4K_D0000_MSR 0x26a
+#define MTRRfix4K_D8000_MSR 0x26b
+#define MTRRfix4K_E0000_MSR 0x26c
+#define MTRRfix4K_E8000_MSR 0x26d
+#define MTRRfix4K_F0000_MSR 0x26e
+#define MTRRfix4K_F8000_MSR 0x26f
+
+#if !defined(__ASSEMBLER__)
+
+/*
+ * The MTRR code has some side effects that the callers should be aware for.
+ * 1. The call sequence matters. x86_setup_mtrrs() calls
+ * x86_setup_fixed_mtrrs_no_enable() then enable_fixed_mtrrs() (equivalent
+ * of x86_setup_fixed_mtrrs()) then x86_setup_var_mtrrs(). If the callers
+ * want to call the components of x86_setup_mtrrs() because of other
+ * rquirements the ordering should still preserved.
+ * 2. enable_fixed_mtrr() will enable both variable and fixed MTRRs because
+ * of the nature of the global MTRR enable flag. Therefore, all direct
+ * or indirect callers of enable_fixed_mtrr() should ensure that the
+ * variable MTRR MSRs do not contain bad ranges.
+ * 3. If CONFIG_CACHE_ROM is selected an MTRR is allocated for enabling
+ * the caching of the ROM. However, it is set to uncacheable (UC). It
+ * is the responsiblity of the caller to enable it by calling
+ * x86_mtrr_enable_rom_caching().
+ */
+void x86_setup_mtrrs(void);
+/*
+ * x86_setup_var_mtrrs() parameters:
+ * address_bits - number of physical address bits supported by cpu
+ * above4gb - 2 means dynamically detect number of variable MTRRs available.
+ * non-zero means handle memory ranges above 4GiB.
+ * 0 means ignore memory ranges above 4GiB
+ */
+void x86_setup_var_mtrrs(unsigned int address_bits, unsigned int above4gb);
+void enable_fixed_mtrr(void);
+void x86_setup_fixed_mtrrs(void);
+/* Set up fixed MTRRs but do not enable them. */
+void x86_setup_fixed_mtrrs_no_enable(void);
+int x86_mtrr_check(void);
+/* ROM caching can be used after variable MTRRs are set up. Beware that
+ * enabling CONFIG_CACHE_ROM will eat through quite a few MTRRs based on
+ * one's IO hole size and WRCOMB resources. Be sure to check the console
+ * log when enabling CONFIG_CACHE_ROM or adding WRCOMB resources. Beware that
+ * on CPUs with core-scoped MTRR registers such as hyperthreaded CPUs the
+ * rom caching will be disabled if all threads run the MTRR code. Therefore,
+ * one needs to call x86_mtrr_enable_rom_caching() after all threads of the
+ * same core have run the MTRR code. */
+#if CONFIG_CACHE_ROM
+void x86_mtrr_enable_rom_caching(void);
+void x86_mtrr_disable_rom_caching(void);
+/* Return the variable range MTRR index of the ROM cache. */
+long x86_mtrr_rom_cache_var_index(void);
+#else
+static inline void x86_mtrr_enable_rom_caching(void) {}
+static inline void x86_mtrr_disable_rom_caching(void) {}
+static inline long x86_mtrr_rom_cache_var_index(void) { return -1; }
+#endif /* CONFIG_CACHE_ROM */
+
+#endif
+
+#if !defined(CONFIG_RAMTOP)
+# error "CONFIG_RAMTOP not defined"
+#endif
+
+#if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE - 1)) != 0)
+# error "CONFIG_XIP_ROM_SIZE is not a power of 2"
+#endif
+
+#if ((CONFIG_CACHE_ROM_SIZE & (CONFIG_CACHE_ROM_SIZE - 1)) != 0)
+# error "CONFIG_CACHE_ROM_SIZE is not a power of 2"
+#endif
+
+#define CACHE_ROM_BASE (((1 << 20) - (CONFIG_CACHE_ROM_SIZE >> 12)) << 12)
+
+#if (CONFIG_RAMTOP & (CONFIG_RAMTOP - 1)) != 0
+# error "CONFIG_RAMTOP must be a power of 2"
+#endif
+
+#endif
#define DEFINE_PCI_DEVICE_TABLE(_table) \
const struct pci_device_id _table[]
+struct pci_controller;
+
void pci_setup_type1(struct pci_controller *hose);
+
+/**
+ * board_pci_setup_hose() - Set up the PCI hose
+ *
+ * This is called by the common x86 PCI code to set up the PCI controller
+ * hose. It may be called when no memory/BSS is available so should just
+ * store things in 'hose' and not in BSS variables.
+ */
+void board_pci_setup_hose(struct pci_controller *hose);
+
+/**
+ * pci_early_init_hose() - Set up PCI host before relocation
+ *
+ * This allocates memory for, sets up and returns the PCI hose. It can be
+ * called before relocation. The hose will be stored in gd->arch.hose for
+ * later use, but will become invalid one DRAM is available.
+ */
+int pci_early_init_hose(struct pci_controller **hosep);
+
+/*
+ * Simple PCI access routines - these work from either the early PCI hose
+ * or the 'real' one, created after U-Boot has memory available
+ */
+unsigned int pci_read_config8(pci_dev_t dev, unsigned where);
+unsigned int pci_read_config16(pci_dev_t dev, unsigned where);
+unsigned int pci_read_config32(pci_dev_t dev, unsigned where);
+
+void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
+void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
+void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
+
#endif
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _post_h
+#define _post_h
+
+/* port to use for post codes */
+#define POST_PORT 0x80
+
+/* post codes which represent various stages of init */
+#define POST_START 0x1e
+#define POST_CAR_START 0x1f
+#define POST_CAR_SIPI 0x20
+#define POST_CAR_MTRR 0x21
+#define POST_CAR_UNCACHEABLE 0x22
+#define POST_CAR_BASE_ADDRESS 0x23
+#define POST_CAR_MASK 0x24
+#define POST_CAR_FILL 0x25
+#define POST_CAR_ROM_CACHE 0x26
+#define POST_CAR_MRC_CACHE 0x27
+#define POST_CAR_CPU_CACHE 0x28
+#define POST_START_STACK 0x29
+#define POST_START_DONE 0x2a
+#define POST_CPU_INIT 0x2b
+#define POST_EARLY_INIT 0x2c
+#define POST_CPU_INFO 0x2d
+#define POST_PRE_MRC 0x2e
+#define POST_MRC 0x2f
+#define POST_DRAM 0x2f
+
+#define POST_RAM_FAILURE 0xea
+
+/* Output a post code using al - value must be 0 to 0xff */
+#ifdef __ASSEMBLY__
+#define post_code(value) \
+ movb $value, %al; \
+ outb %al, $POST_PORT
+#else
+#include <asm/io.h>
+
+static inline void post_code(int code)
+{
+ outb(code, POST_PORT);
+}
+#endif
+
+#endif
#define X86_GDT_SIZE (X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE)
+#ifndef __ASSEMBLY__
+
+#define PORT_RESET 0xcf9
+
+static inline __attribute__((always_inline)) void cpu_hlt(void)
+{
+ asm("hlt");
+}
+
+static inline ulong cpu_get_sp(void)
+{
+ ulong result;
+
+ asm volatile(
+ "mov %%esp, %%eax"
+ : "=a" (result));
+ return result;
+}
+
+#endif /* __ASSEMBLY__ */
+
#endif
#define _U_BOOT_I386_H_ 1
/* cpu/.../cpu.c */
+int arch_cpu_init(void);
int x86_cpu_init_r(void);
int cpu_init_r(void);
int x86_cpu_init_f(void);
void timer_set_base(uint64_t base);
int pcat_timer_init(void);
-/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */
-int dram_init_f(void);
+/* Architecture specific DRAM init */
+int dram_init(void);
/* cpu/.../interrupts.c */
int cpu_init_interrupts(void);
/* board/.../... */
int dram_init(void);
+int cleanup_before_linux(void);
+int x86_cleanup_before_linux(void);
+void x86_enable_caches(void);
+void x86_disable_caches(void);
+int x86_init_cache(void);
+void reset_cpu(ulong addr);
+ulong board_get_usable_ram_top(ulong total_size);
+void dram_init_banksize(void);
+int default_print_cpuinfo(void);
+
void setup_pcat_compatibility(void);
void isa_unmap_rom(u32 addr);
void timer_set_tsc_base(uint64_t new_base);
uint64_t timer_get_tsc(void);
+void quick_ram_check(void);
+
#endif /* _U_BOOT_I386_H_ */
obj-$(CONFIG_PCI) += pci_type1.o
obj-y += relocate.o
obj-y += physmem.o
+obj-$(CONFIG_X86_RAMTEST) += ramtest.o
obj-y += string.o
obj-$(CONFIG_SYS_X86_TSC_TIMER) += tsc_timer.o
obj-$(CONFIG_VIDEO_VGA) += video.o
puts("ready\n");
return 0;
}
-
-int find_fdt(void)
-{
-#ifdef CONFIG_OF_EMBED
- /* Get a pointer to the FDT */
- gd->fdt_blob = __dtb_dt_begin;
-#elif defined CONFIG_OF_SEPARATE
- /* FDT is at end of image */
- gd->fdt_blob = (ulong *)&_end;
-#endif
- /* Allow the early environment to override the fdt address */
- gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
- (uintptr_t)gd->fdt_blob);
-
- return 0;
-}
-
-int prepare_fdt(void)
-{
- /* For now, put this check after the console is ready */
- if (fdtdec_prepare_fdt()) {
- panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
- "doc/README.fdt-control");
- }
-
- return 0;
-}
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot src/lib/ramtest.c
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/post.h>
+
+static void write_phys(unsigned long addr, u32 value)
+{
+#if CONFIG_SSE2
+ asm volatile(
+ "movnti %1, (%0)"
+ : /* outputs */
+ : "r" (addr), "r" (value) /* inputs */
+ : /* clobbers */
+ );
+#else
+ writel(value, addr);
+#endif
+}
+
+static u32 read_phys(unsigned long addr)
+{
+ return readl(addr);
+}
+
+static void phys_memory_barrier(void)
+{
+#if CONFIG_SSE2
+ /* Needed for movnti */
+ asm volatile(
+ "sfence"
+ :
+ :
+ : "memory"
+ );
+#else
+ asm volatile(""
+ :
+ :
+ : "memory");
+#endif
+}
+
+void quick_ram_check(void)
+{
+ int fail = 0;
+ u32 backup;
+
+ backup = read_phys(CONFIG_RAMBASE);
+ write_phys(CONFIG_RAMBASE, 0x55555555);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0x55555555)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0xaaaaaaaa);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0xaaaaaaaa)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0x00000000);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0x00000000)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0xffffffff);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0xffffffff)
+ fail = 1;
+
+ write_phys(CONFIG_RAMBASE, backup);
+ if (fail) {
+ post_code(POST_RAM_FAILURE);
+ panic("RAM INIT FAILURE!\n");
+ }
+ phys_memory_barrier();
+}
/*
* Copyright (c) 2012 The Chromium OS Authors.
*
+ * TSC calibration codes are adapted from Linux kernel
+ * arch/x86/kernel/tsc_msr.c and arch/x86/kernel/tsc.c
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/msr.h>
#include <asm/u-boot-x86.h>
+/* CPU reference clock frequency: in KHz */
+#define FREQ_83 83200
+#define FREQ_100 99840
+#define FREQ_133 133200
+#define FREQ_166 166400
+
+#define MAX_NUM_FREQS 8
+
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * According to Intel 64 and IA-32 System Programming Guide,
+ * if MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
+ * read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
+ * Unfortunately some Intel Atom SoCs aren't quite compliant to this,
+ * so we need manually differentiate SoC families. This is what the
+ * field msr_plat does.
+ */
+struct freq_desc {
+ u8 x86_family; /* CPU family */
+ u8 x86_model; /* model */
+ /* 2: use 100MHz, 1: use MSR_PLATFORM_INFO, 0: MSR_IA32_PERF_STATUS */
+ u8 msr_plat;
+ u32 freqs[MAX_NUM_FREQS];
+};
+
+static struct freq_desc freq_desc_tables[] = {
+ /* PNW */
+ { 6, 0x27, 0, { 0, 0, 0, 0, 0, FREQ_100, 0, FREQ_83 } },
+ /* CLV+ */
+ { 6, 0x35, 0, { 0, FREQ_133, 0, 0, 0, FREQ_100, 0, FREQ_83 } },
+ /* TNG */
+ { 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } },
+ /* VLV2 */
+ { 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
+ /* Ivybridge */
+ { 6, 0x3a, 2, { 0, 0, 0, 0, 0, 0, 0, 0 } },
+ /* ANN */
+ { 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } },
+};
+
+static int match_cpu(u8 family, u8 model)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(freq_desc_tables); i++) {
+ if ((family == freq_desc_tables[i].x86_family) &&
+ (model == freq_desc_tables[i].x86_model))
+ return i;
+ }
+
+ return -1;
+}
+
+/* Map CPU reference clock freq ID(0-7) to CPU reference clock freq(KHz) */
+#define id_to_freq(cpu_index, freq_id) \
+ (freq_desc_tables[cpu_index].freqs[freq_id])
+
+/*
+ * Do MSR calibration only for known/supported CPUs.
+ *
+ * Returns the calibration value or 0 if MSR calibration failed.
+ */
+static unsigned long try_msr_calibrate_tsc(void)
+{
+ u32 lo, hi, ratio, freq_id, freq;
+ unsigned long res;
+ int cpu_index;
+
+ cpu_index = match_cpu(gd->arch.x86, gd->arch.x86_model);
+ if (cpu_index < 0)
+ return 0;
+
+ if (freq_desc_tables[cpu_index].msr_plat) {
+ rdmsr(MSR_PLATFORM_INFO, lo, hi);
+ ratio = (lo >> 8) & 0x1f;
+ } else {
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ ratio = (hi >> 8) & 0x1f;
+ }
+ debug("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio);
+
+ if (!ratio)
+ goto fail;
+
+ if (freq_desc_tables[cpu_index].msr_plat == 2) {
+ /* TODO: Figure out how best to deal with this */
+ freq = FREQ_100;
+ debug("Using frequency: %u KHz\n", freq);
+ } else {
+ /* Get FSB FREQ ID */
+ rdmsr(MSR_FSB_FREQ, lo, hi);
+ freq_id = lo & 0x7;
+ freq = id_to_freq(cpu_index, freq_id);
+ debug("Resolved frequency ID: %u, frequency: %u KHz\n",
+ freq_id, freq);
+ }
+ if (!freq)
+ goto fail;
+
+ /* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
+ res = freq * ratio / 1000;
+ debug("TSC runs at %lu MHz\n", res);
+
+ return res;
+
+fail:
+ debug("Fast TSC calibration using MSR failed\n");
+ return 0;
+}
+
+/*
+ * This reads the current MSB of the PIT counter, and
+ * checks if we are running on sufficiently fast and
+ * non-virtualized hardware.
+ *
+ * Our expectations are:
+ *
+ * - the PIT is running at roughly 1.19MHz
+ *
+ * - each IO is going to take about 1us on real hardware,
+ * but we allow it to be much faster (by a factor of 10) or
+ * _slightly_ slower (ie we allow up to a 2us read+counter
+ * update - anything else implies a unacceptably slow CPU
+ * or PIT for the fast calibration to work.
+ *
+ * - with 256 PIT ticks to read the value, we have 214us to
+ * see the same MSB (and overhead like doing a single TSC
+ * read per MSB value etc).
+ *
+ * - We're doing 2 reads per loop (LSB, MSB), and we expect
+ * them each to take about a microsecond on real hardware.
+ * So we expect a count value of around 100. But we'll be
+ * generous, and accept anything over 50.
+ *
+ * - if the PIT is stuck, and we see *many* more reads, we
+ * return early (and the next caller of pit_expect_msb()
+ * then consider it a failure when they don't see the
+ * next expected value).
+ *
+ * These expectations mean that we know that we have seen the
+ * transition from one expected value to another with a fairly
+ * high accuracy, and we didn't miss any events. We can thus
+ * use the TSC value at the transitions to calculate a pretty
+ * good value for the TSC frequencty.
+ */
+static inline int pit_verify_msb(unsigned char val)
+{
+ /* Ignore LSB */
+ inb(0x42);
+ return inb(0x42) == val;
+}
+
+static inline int pit_expect_msb(unsigned char val, u64 *tscp,
+ unsigned long *deltap)
+{
+ int count;
+ u64 tsc = 0, prev_tsc = 0;
+
+ for (count = 0; count < 50000; count++) {
+ if (!pit_verify_msb(val))
+ break;
+ prev_tsc = tsc;
+ tsc = rdtsc();
+ }
+ *deltap = rdtsc() - prev_tsc;
+ *tscp = tsc;
+
+ /*
+ * We require _some_ success, but the quality control
+ * will be based on the error terms on the TSC values.
+ */
+ return count > 5;
+}
+
+/*
+ * How many MSB values do we want to see? We aim for
+ * a maximum error rate of 500ppm (in practice the
+ * real error is much smaller), but refuse to spend
+ * more than 50ms on it.
+ */
+#define MAX_QUICK_PIT_MS 50
+#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+
+static unsigned long quick_pit_calibrate(void)
+{
+ int i;
+ u64 tsc, delta;
+ unsigned long d1, d2;
+
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Counter 2, mode 0 (one-shot), binary count
+ *
+ * NOTE! Mode 2 decrements by two (and then the
+ * output is flipped each time, giving the same
+ * final output frequency as a decrement-by-one),
+ * so mode 0 is much better when looking at the
+ * individual counts.
+ */
+ outb(0xb0, 0x43);
+
+ /* Start at 0xffff */
+ outb(0xff, 0x42);
+ outb(0xff, 0x42);
+
+ /*
+ * The PIT starts counting at the next edge, so we
+ * need to delay for a microsecond. The easiest way
+ * to do that is to just read back the 16-bit counter
+ * once from the PIT.
+ */
+ pit_verify_msb(0);
+
+ if (pit_expect_msb(0xff, &tsc, &d1)) {
+ for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+ if (!pit_expect_msb(0xff-i, &delta, &d2))
+ break;
+
+ /*
+ * Iterate until the error is less than 500 ppm
+ */
+ delta -= tsc;
+ if (d1+d2 >= delta >> 11)
+ continue;
+
+ /*
+ * Check the PIT one more time to verify that
+ * all TSC reads were stable wrt the PIT.
+ *
+ * This also guarantees serialization of the
+ * last cycle read ('d2') in pit_expect_msb.
+ */
+ if (!pit_verify_msb(0xfe - i))
+ break;
+ goto success;
+ }
+ }
+ debug("Fast TSC calibration failed\n");
+ return 0;
+
+success:
+ /*
+ * Ok, if we get here, then we've seen the
+ * MSB of the PIT decrement 'i' times, and the
+ * error has shrunk to less than 500 ppm.
+ *
+ * As a result, we can depend on there not being
+ * any odd delays anywhere, and the TSC reads are
+ * reliable (within the error).
+ *
+ * kHz = ticks / time-in-seconds / 1000;
+ * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+ * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+ */
+ delta *= PIT_TICK_RATE;
+ delta /= (i*256*1000);
+ debug("Fast TSC calibration using PIT\n");
+ return delta / 1000;
+}
+
void timer_set_base(u64 base)
{
gd->arch.tsc_base = base;
return now_tick - gd->arch.tsc_base;
}
-#define PLATFORM_INFO_MSR 0xce
-
/* Get the speed of the TSC timer in MHz */
unsigned __attribute__((no_instrument_function)) long get_tbclk_mhz(void)
{
- u32 ratio;
- u64 platform_info = native_read_msr(PLATFORM_INFO_MSR);
+ unsigned long fast_calibrate;
+
+ if (gd->arch.tsc_mhz)
+ return gd->arch.tsc_mhz;
+
+ fast_calibrate = try_msr_calibrate_tsc();
+ if (!fast_calibrate) {
+
+ fast_calibrate = quick_pit_calibrate();
+ if (!fast_calibrate)
+ panic("TSC frequency is ZERO");
+ }
- /* 100MHz times Max Non Turbo ratio */
- ratio = (platform_info >> 8) & 0xff;
- return 100 * ratio;
+ gd->arch.tsc_mhz = fast_calibrate;
+ return fast_calibrate;
}
unsigned long get_tbclk(void)
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
if TARGET_AP_SH4A_4A
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "ap_sh4a_4a"
#endif /* !defined(CONFIG_ARCHES) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-extern void __ft_board_setup(void *blob, bd_t *bd);
+extern int __ft_board_setup(void *blob, bd_t *bd);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
__ft_board_setup(blob, bd);
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
"disabled", sizeof("disabled"), 1);
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
*/
#include <common.h>
+#include <errno.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/ppc4xx.h>
* On NAND-booting sequoia, we need to patch the chips select numbers
* in the dtb (CS0 - NAND, CS3 - NOR)
*/
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
int len;
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
if (prop == NULL) {
printf("Unable to update NOR chip select for NAND booting\n");
- return;
+ return -FDT_ERR_NOTFOUND;
}
reg = (u32 *)&prop->data[0];
reg[0] = 3;
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
if (rc) {
- printf("Unable to update property NOR mappings, err=%s\n",
- fdt_strerror(rc));
- return;
+ printf("Unable to update property NOR mappings\n");
+ return rc;
}
/* And now configure NAND chip select to 0 instead of 3 */
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
if (prop == NULL) {
printf("Unable to update NDFC chip select for NAND booting\n");
- return;
+ return len;
}
reg = (u32 *)&prop->data[0];
reg[0] = 0;
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
if (rc) {
- printf("Unable to update property NDFC mappings, err=%s\n",
- fdt_strerror(rc));
- return;
+ printf("Unable to update property NDFC mapping\n");
+ return rc;
}
+
+ return 0;
}
#endif /* CONFIG_SYS_RAMBOOT */
--- /dev/null
+if TARGET_SAMA5D4_XPLAINED
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_BOARD
+ default "sama5d4_xplained"
+
+config SYS_VENDOR
+ default "atmel"
+
+config SYS_SOC
+ default "at91"
+
+config SYS_CONFIG_NAME
+ default "sama5d4_xplained"
+
+endif
--- /dev/null
+SAMA5D4 XPLAINED ULTRA BOARD
+M: Bo Shen <voice.shen@atmel.com>
+S: Maintained
+F: board/atmel/sama5d4_xplained/
+F: include/configs/sama5d4_xplained.h
+F: configs/sama5d4_xplained_mmc_defconfig
+F: configs/sama5d4_xplained_nandflash_defconfig
+F: configs/sama5d4_xplained_spiflash_defconfig
--- /dev/null
+#
+# Copyright (C) 2014 Atmel
+# Bo Shen <voice.shen@atmel.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += sama5d4_xplained.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/sama5d4.h>
+#include <atmel_lcdc.h>
+#include <atmel_mci.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <nand.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ATMEL_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+}
+
+static void sama5d4_xplained_spi0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_NAND_ATMEL
+static void sama5d4_xplained_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+ at91_periph_clk_enable(ATMEL_ID_SMC);
+
+ /* Configure SMC CS3 for NAND */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
+ AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
+ AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3)|
+ AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
+ at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
+ at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
+ at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
+ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
+ at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
+ at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d4_xplained_usb_hw_init(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTE, 11, 1);
+ at91_set_pio_output(AT91_PIO_PORTE, 14, 1);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 480,
+ .vl_row = 272,
+ .vl_clk = 9000,
+ .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
+ .vl_bpix = LCD_BPP,
+ .vl_bpox = LCD_OUTPUT_BPP,
+ .vl_tft = 1,
+ .vl_hsync_len = 41,
+ .vl_left_margin = 2,
+ .vl_right_margin = 2,
+ .vl_vsync_len = 11,
+ .vl_upper_margin = 2,
+ .vl_lower_margin = 2,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void) { /* Empty! */ }
+void lcd_disable(void) { /* Empty! */ }
+
+unsigned int has_lcdc(void)
+{
+ return 1;
+}
+
+static void sama5d4_xplained_lcd_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
+ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
+ at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("2014 ATMEL Corp\n");
+ lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+
+ nand_size = 0;
+#ifdef CONFIG_NAND_ATMEL
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+#endif
+ lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20, nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+
+#endif /* CONFIG_LCD */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void sama5d4_xplained_mci1_hw_init(void)
+{
+ at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
+ at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
+ at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
+ at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
+ at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
+ at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
+
+ /*
+ * As the mci io internal pull down is too strong, so if the io needs
+ * external pull up, the pull up resistor will be very small, if so
+ * the power consumption will increase, so disable the interanl pull
+ * down to save the power.
+ */
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ return atmel_mci_init((void *)ATMEL_BASE_MCI1);
+}
+#endif /* CONFIG_GENERIC_ATMEL_MCI */
+
+#ifdef CONFIG_MACB
+void sama5d4_xplained_macb0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_GMAC0);
+}
+#endif
+
+static void sama5d4_xplained_serial3_hw_init(void)
+{
+ at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
+ at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART3);
+}
+
+int board_early_init_f(void)
+{
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ at91_periph_clk_enable(ATMEL_ID_PIOD);
+ at91_periph_clk_enable(ATMEL_ID_PIOE);
+
+ sama5d4_xplained_serial3_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+ sama5d4_xplained_spi0_hw_init();
+#endif
+#ifdef CONFIG_NAND_ATMEL
+ sama5d4_xplained_nand_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ sama5d4_xplained_mci1_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ sama5d4_xplained_macb0_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ sama5d4_xplained_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ sama5d4_xplained_usb_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
+#endif
+
+ return rc;
+}
--- /dev/null
+if TARGET_SAMA5D4EK
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_BOARD
+ default "sama5d4ek"
+
+config SYS_VENDOR
+ default "atmel"
+
+config SYS_SOC
+ default "at91"
+
+config SYS_CONFIG_NAME
+ default "sama5d4ek"
+
+endif
--- /dev/null
+SAMA5D4EK BOARD
+M: Bo Shen <voice.shen@atmel.com>
+S: Maintained
+F: board/atmel/sama5d4ek/
+F: include/configs/sama5d4ek.h
+F: configs/sama5d4ek_mmc_defconfig
+F: configs/sama5d4ek_nandflash_defconfig
+F: configs/sama5d4ek_spiflash_defconfig
--- /dev/null
+#
+# Copyright (C) 2014 Atmel
+# Bo Shen <voice.shen@atmel.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += sama5d4ek.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/sama5d4.h>
+#include <atmel_lcdc.h>
+#include <atmel_mci.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <nand.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ATMEL_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+}
+
+static void sama5d4ek_spi0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_NAND_ATMEL
+static void sama5d4ek_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+ at91_periph_clk_enable(ATMEL_ID_SMC);
+
+ /* Configure SMC CS3 for NAND */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
+ AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
+ AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3)|
+ AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
+ at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
+ at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
+ at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
+ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
+ at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
+ at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d4ek_usb_hw_init(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
+ at91_set_pio_output(AT91_PIO_PORTE, 12, 0);
+ at91_set_pio_output(AT91_PIO_PORTE, 10, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_clk = 33260000,
+ .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
+ .vl_bpix = LCD_BPP,
+ .vl_tft = 1,
+ .vl_hsync_len = 5,
+ .vl_left_margin = 128,
+ .vl_right_margin = 0,
+ .vl_vsync_len = 5,
+ .vl_upper_margin = 23,
+ .vl_lower_margin = 22,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void) { /* Empty! */ }
+void lcd_disable(void) { /* Empty! */ }
+
+unsigned int has_lcdc(void)
+{
+ return 1;
+}
+
+static void sama5d4ek_lcd_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("2014 ATMEL Corp\n");
+ lcd_printf("at91@atmel.com\n");
+ lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+
+ nand_size = 0;
+#ifdef CONFIG_NAND_ATMEL
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+#endif
+ lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20, nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+
+#endif /* CONFIG_LCD */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void sama5d4ek_mci1_hw_init(void)
+{
+ at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
+ at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
+ at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
+ at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
+ at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
+ at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
+
+ /*
+ * As the mci io internal pull down is too strong, so if the io needs
+ * external pull up, the pull up resistor will be very small, if so
+ * the power consumption will increase, so disable the interanl pull
+ * down to save the power.
+ */
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
+ at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Enable power for MCI1 interface */
+ at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
+
+ return atmel_mci_init((void *)ATMEL_BASE_MCI1);
+}
+#endif /* CONFIG_GENERIC_ATMEL_MCI */
+
+#ifdef CONFIG_MACB
+void sama5d4ek_macb0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_GMAC0);
+}
+#endif
+
+static void sama5d4ek_serial3_hw_init(void)
+{
+ at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
+ at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART3);
+}
+
+int board_early_init_f(void)
+{
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ at91_periph_clk_enable(ATMEL_ID_PIOD);
+ at91_periph_clk_enable(ATMEL_ID_PIOE);
+
+ sama5d4ek_serial3_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+ sama5d4ek_spi0_hw_init();
+#endif
+#ifdef CONFIG_NAND_ATMEL
+ sama5d4ek_nand_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ sama5d4ek_mci1_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ sama5d4ek_macb0_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ sama5d4ek_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ sama5d4ek_usb_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
+#endif
+
+ return rc;
+}
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+ int ret;
u32 index = 0;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
SNAPPER9260 BOARD
-M: Ryan Mallon <ryan@bluewatersys.com>
+M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/bluewater/snapper9260/
F: include/configs/snapper9260.h
*/
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/atmel_serial.h>
#include <net.h>
#include <netdev.h>
#include <i2c.h>
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand_rdy");
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand_ce");
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
int board_init(void)
void reset_phy(void)
{
}
+
+static struct atmel_serial_platdata at91sam9260_serial_plat = {
+ .base_addr = ATMEL_BASE_DBGU,
+};
+
+U_BOOT_DEVICE(at91sam9260_serial) = {
+ .name = "serial_atmel",
+ .platdata = &at91sam9260_serial_plat,
+};
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+ int ret;
u32 index = 0;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
--- /dev/null
+BCM11130 BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcm28155_ap/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm11130_defconfig
--- /dev/null
+BCM11130_NAND BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcm28155_ap/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm11130_nand_defconfig
--- /dev/null
+BCM911360_ENTPHN-NS BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360_entphn-ns_defconfig
--- /dev/null
+BCM911360_ENTPHN BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360_entphn_defconfig
--- /dev/null
+BCM911360K BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360k_defconfig
--- /dev/null
+BCM958300K-NS BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm958300k-ns_defconfig
-Broadcom: Cygnus
+BCM958300K BOARD
M: Steve Rae <srae@broadcom.com>
S: Maintained
-F: board/broadcom/bcm958300k/
+F: board/broadcom/bcmcygnus/
F: include/configs/bcm_ep_board.h
F: configs/bcm958300k_defconfig
--- /dev/null
+BCM958305K BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm958305k_defconfig
-Broadcom: Northstar Plus
+BCM958622HR BOARD
M: Steve Rae <srae@broadcom.com>
S: Maintained
-F: board/broadcom/bcm958622hr/
+F: board/broadcom/bcmnsp/
F: include/configs/bcm_ep_board.h
F: configs/bcm958622hr_defconfig
return status;
}
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+}
+
+void smp_kick_all_cpus(void)
+{
+}
+
+void smp_waitloop(unsigned previous_address)
+{
+}
+#endif
-if TARGET_BCM958300K
+if TARGET_BCMCYGNUS
config SYS_BOARD
default "bcm_ep"
-if TARGET_BCM958622HR
+if TARGET_BCMNSP
config SYS_BOARD
default "bcm_ep"
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/* Make sure this gpio has logical 0 value */
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0);
udelay(100);
-
- cm_fx6_sata_power(0);
- mdelay(250);
cm_fx6_sata_power(1);
for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) {
return err;
}
+
+int sata_stop(void)
+{
+ __sata_stop();
+ cm_fx6_sata_power(0);
+ mdelay(250);
+
+ return 0;
+}
#else
static int cm_fx6_setup_issd(void) { return 0; }
#endif
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
fdt_find_and_setprop(blob, "/fec", "local-mac-address",
enetaddr, 6, 1);
}
+
+ return 0;
}
#endif
#ifdef CONFIG_USB_HOST_ETHER
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address",
enetaddr, 6, 1);
}
+
+ return 0;
}
static void generate_mac_addr(uint8_t *enetaddr)
default "coreboot"
config SYS_VENDOR
- default "chromebook-x86"
+ default "coreboot"
config SYS_SOC
default "coreboot"
COREBOOT BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: board/chromebook-x86/coreboot/
+F: board/coreboot/coreboot/
F: include/configs/coreboot.h
F: configs/coreboot-x86_defconfig
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
{
*(.vectors)
arch/arm/cpu/arm926ejs/start.o (.text*)
- arch/arm/cpu/arm926ejs/davinci/built-in.o (.text*)
+ arch/arm/cpu/arm926ejs/built-in.o (.text*)
drivers/mtd/nand/built-in.o (.text*)
*(.text*)
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+ int ret;
int i;
/*
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
#include <image.h>
#include <asm/byteorder.h>
#include <fat.h>
+#include <flash.h>
#include <part.h>
#include "auto_update.h"
#define MAX_LOADSZ 0x1c00000
/* externals */
-extern int fat_register_device(block_dev_desc_t *, int);
-extern int file_fat_detectfs(void);
-extern long file_fat_read(const char *, void *, unsigned long);
long do_fat_read (const char *filename, void *buffer,
unsigned long maxsize, int dols);
-extern int flash_sect_erase(ulong, ulong);
-extern int flash_sect_protect (int, ulong, ulong);
-extern int flash_write (char *, ulong, ulong);
extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
#endif /* defined(CONFIG_PCI) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
printf("err=%s\n", fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
if TARGET_ESPT
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "espt"
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
printf("\nRemove sim from hwconfig and reset\n");
}
}
+
+ return 0;
}
#endif
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_del_sec(blob, 1);
else if (cpu->soc_ver == SVR_C292)
fdt_del_sec(blob, 2);
+
+ return 0;
}
#endif
obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o
obj-$(CONFIG_ZM7300) += zm7300.o
+obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
}
}
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
cds_pci_fixup(blob);
#endif
+
+ return 0;
}
#endif
--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+
+struct pmic *pfuze_common_init(unsigned char i2cbus)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg;
+
+ ret = power_pfuze100_init(i2cbus);
+ if (ret)
+ return NULL;
+
+ p = pmic_get("PFUZE100");
+ ret = pmic_probe(p);
+ if (ret)
+ return NULL;
+
+ pmic_reg_read(p, PFUZE100_DEVICEID, ®);
+ printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+
+ /* Set SW1AB stanby volage to 0.975V */
+ pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®);
+ reg &= ~SW1x_STBY_MASK;
+ reg |= SW1x_0_975V;
+ pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
+
+ /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PUZE_100_SW1ABCONF, ®);
+ reg &= ~SW1xCONF_DVSSPEED_MASK;
+ reg |= SW1xCONF_DVSSPEED_4US;
+ pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+
+ /* Set SW1C standby voltage to 0.975V */
+ pmic_reg_read(p, PFUZE100_SW1CSTBY, ®);
+ reg &= ~SW1x_STBY_MASK;
+ reg |= SW1x_0_975V;
+ pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
+
+ /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PFUZE100_SW1CCONF, ®);
+ reg &= ~SW1xCONF_DVSSPEED_MASK;
+ reg |= SW1xCONF_DVSSPEED_4US;
+ pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
+
+ return p;
+}
--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PFUZE_BOARD_HELPER__
+#define __PFUZE_BOARD_HELPER__
+
+struct pmic *pfuze_common_init(unsigned char i2cbus);
+
+#endif
e.date[3] & 0x80 ? "PM" : "");
/* Show MAC addresses */
- for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
+ for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
u8 *p = e.mac[i];
*/
for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) {
ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- p, min((sizeof(e) - i), 8));
+ p, min((int)(sizeof(e) - i), 8));
if (ret)
break;
udelay(5000); /* 5ms write cycle timing */
memset(e.mac[8], 0xff, 6);
#endif
- for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
+ for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
char ethaddr[18];
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
u8 flash_read8(void *addr)
}
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
u8 flash_read8(void *addr)
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ return 0;
}
#endif
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_esdhc(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
#else /* CONFIG_SPL_BUILD */
do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
#endif
fdt_fixup_dr_usb(blob, bd);
fdt_tsec1_fixup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
#endif /* CONFIG_HARD_SPI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
"peripheral", sizeof("peripheral"), 1);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
#endif
}
}
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_pci_setup(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_tsec_fixup(blob, bd);
ft_pci_fixup(blob, bd);
ft_pcie_fixup(blob, bd);
#endif
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_esdhc(blob, bd);
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
#endif
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
}
#endif
}
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
}
#endif
}
+
+ return 0;
}
#endif
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_SYS_UCC_RMII_MODE)
int nodeoff, off, err;
fdt_board_fixup_esdhc(blob, bd);
fdt_board_fixup_qe_uart(blob, bd);
fdt_board_fixup_qe_usb(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int off;
u64 *tmp;
- u32 *addrcells;
+ int addrcells;
ft_cpu_setup(blob, bd);
* which is defined by the "reg" property in the soc node.
*/
off = fdt_path_offset(blob, "/soc8641");
- addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+ addrcells = fdt_address_cells(blob, 0);
tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
if (tmp) {
u64 addr;
- if (addrcells && (*addrcells == 1))
+
+ if (addrcells == 1)
addr = *(u32 *)tmp;
else
addr = *tmp;
"in u-boot. This means your .dts might "
"be old.\n");
}
+
+ return 0;
}
#endif
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
};
u32 index;
- s32 status = 0;
+ int ret;
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(1)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+ int ret;
u32 index = 0;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif
#include <asm/imx-common/video.h>
#include <asm/arch/crm_regs.h>
#include <pca953x.h>
+#include <power/pmic.h>
+#include "../common/pfuze.h"
DECLARE_GLOBAL_DATA_PTR;
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define I2C_PMIC 1
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
}
};
+#ifndef CONFIG_SYS_FLASH_CFI
/*
* I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
* Compass Sensor, Accelerometer, Res Touch
.gp = IMX_GPIO_NR(3, 18)
}
};
+#endif
static iomux_v3_cfg_t const i2c3_pads[] = {
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
return 0;
}
+static iomux_v3_cfg_t const eimnor_pads[] = {
+ MX6_PAD_EIM_D16__EIM_DATA16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D17__EIM_DATA17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D18__EIM_DATA18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D19__EIM_DATA19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D20__EIM_DATA20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D21__EIM_DATA21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D22__EIM_DATA22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D23__EIM_DATA23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D24__EIM_DATA24 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D25__EIM_DATA25 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D26__EIM_DATA26 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D27__EIM_DATA27 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D28__EIM_DATA28 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D29__EIM_DATA29 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D30__EIM_DATA30 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_D31__EIM_DATA31 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA0__EIM_AD00 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA1__EIM_AD01 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA2__EIM_AD02 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA3__EIM_AD03 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA4__EIM_AD04 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA5__EIM_AD05 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA6__EIM_AD06 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA7__EIM_AD07 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA8__EIM_AD08 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA9__EIM_AD09 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA10__EIM_AD10 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA11__EIM_AD11 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL) ,
+ MX6_PAD_EIM_DA12__EIM_AD12 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA13__EIM_AD13 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA14__EIM_AD14 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_DA15__EIM_AD15 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A16__EIM_ADDR16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A17__EIM_ADDR17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A18__EIM_ADDR18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A19__EIM_ADDR19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A20__EIM_ADDR20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A21__EIM_ADDR21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A22__EIM_ADDR22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_A23__EIM_ADDR23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
+ MX6_PAD_EIM_OE__EIM_OE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EIM_RW__EIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EIM_CS0__EIM_CS0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void eimnor_cs_setup(void)
+{
+ struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
+
+ writel(0x00020181, &weim_regs->cs0gcr1);
+ writel(0x00000001, &weim_regs->cs0gcr2);
+ writel(0x0a020000, &weim_regs->cs0rcr1);
+ writel(0x0000c000, &weim_regs->cs0rcr2);
+ writel(0x0804a240, &weim_regs->cs0wcr1);
+ writel(0x00000120, &weim_regs->wcr);
+
+ set_chipselect_size(CS0_128);
+}
+
+static void setup_iomux_eimnor(void)
+{
+ imx_iomux_v3_setup_multiple_pads(eimnor_pads, ARRAY_SIZE(eimnor_pads));
+
+ gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
+
+ eimnor_cs_setup();
+}
+
static void setup_iomux_enet(void)
{
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
#ifdef CONFIG_NAND_MXS
setup_gpmi_nand();
#endif
+
return 0;
}
/* I2C 3 Steer */
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
+#ifndef CONFIG_SYS_FLASH_CFI
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-
+#endif
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
imx_iomux_v3_setup_multiple_pads(port_exp, ARRAY_SIZE(port_exp));
+ setup_iomux_eimnor();
return 0;
}
}
#endif
+int power_init_board(void)
+{
+ struct pmic *p;
+
+ p = pfuze_common_init(I2C_PMIC);
+ if (!p)
+ return -ENODEV;
+
+ return 0;
+}
+
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
F: include/configs/mx6sabresd.h
F: configs/mx6dlsabresd_defconfig
F: configs/mx6qsabresd_defconfig
+F: configs/mx6sabresd_spl_defconfig
#include <i2c.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
#include <asm/arch/mx6-ddr.h>
DECLARE_GLOBAL_DATA_PTR;
-#define BOOT_CFG 0x020D8004
-
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
return 0;
#else
- unsigned reg = readl(BOOT_CFG) >> 11;
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned reg = readl(&psrc->sbmr1) >> 11;
/*
* Upon reading BOOT_CFG register the following map is done:
* Bit 11 and 12 of BOOT_CFG register can determine the current
return 0;
}
-static int pfuze_init(void)
+int power_init_board(void)
{
struct pmic *p;
- int ret;
unsigned int reg;
- ret = power_pfuze100_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("PFUZE100");
- ret = pmic_probe(p);
- if (ret)
- return ret;
-
- pmic_reg_read(p, PFUZE100_DEVICEID, ®);
- printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+ p = pfuze_common_init(I2C_PMIC);
+ if (!p)
+ return -ENODEV;
/* Increase VGEN3 from 2.5 to 2.8V */
pmic_reg_read(p, PFUZE100_VGEN3VOL, ®);
- reg &= ~0xf;
- reg |= 0xa;
+ reg &= ~LDO_VOL_MASK;
+ reg |= LDOB_2_80V;
pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
/* Increase VGEN5 from 2.8 to 3V */
pmic_reg_read(p, PFUZE100_VGEN5VOL, ®);
- reg &= ~0xf;
- reg |= 0xc;
+ reg &= ~LDO_VOL_MASK;
+ reg |= LDOB_3_00V;
pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
- /* Set SW1AB stanby volage to 0.975V */
- pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®);
- reg &= ~0x3f;
- reg |= 0x1b;
- pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
-
- /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PUZE_100_SW1ABCONF, ®);
- reg &= ~0xc0;
- reg |= 0x40;
- pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
-
- /* Set SW1C standby voltage to 0.975V */
- pmic_reg_read(p, PFUZE100_SW1CSTBY, ®);
- reg &= ~0x3f;
- reg |= 0x1b;
- pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
-
- /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PFUZE100_SW1CCONF, ®);
- reg &= ~0xc0;
- reg |= 0x40;
- pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
-
return 0;
}
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
- pfuze_init();
-
return 0;
}
.trasmin = 3500,
};
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF00000, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
/*
- * This section require the differentiation
- * between iMX6 Sabre Families.
- * But for now, it will configure only for
- * SabreSD.
+ * This section requires the differentiation between iMX6 Sabre boards, but
+ * for now, it will configure only for the mx6q variant.
*/
static void spl_dram_init(void)
{
/* setup AIPS and disable watchdog */
arch_cpu_init();
+ ccgr_init();
+ gpr_init();
+
/* iomux and setup of i2c */
board_early_init_f();
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- * Jason Liu <r64343@freescale.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0x00FFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en = 1 --> CKO1 enabled
- * cko1_div = 111 --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4 0x020c4060 0x000000fb
static int setup_fec(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int ret;
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
- ret = enable_fec_anatop_clock(ENET_50MHz);
- if (ret)
- return ret;
-
- return 0;
+ return enable_fec_anatop_clock(ENET_50MHz);
}
#endif
#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
DECLARE_GLOBAL_DATA_PTR;
MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /* CD pin */
+ MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+ /* RST_B, used for power reset cycle */
+ MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
- int ret;
int reg;
/* Use 125MHz anatop loopback REF_CLK1 for ENET1 */
reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
writel(reg, &anatop->pll_enet);
- ret = enable_fec_anatop_clock(ENET_125MHz);
- if (ret)
- return ret;
-
- return 0;
+ return enable_fec_anatop_clock(ENET_125MHz);
}
int board_eth_init(bd_t *bis)
},
};
-static int pfuze_init(void)
+int power_init_board(void)
{
struct pmic *p;
- int ret;
unsigned int reg;
- ret = power_pfuze100_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("PFUZE100");
- ret = pmic_probe(p);
- if (ret)
- return ret;
-
- pmic_reg_read(p, PFUZE100_DEVICEID, ®);
- printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
-
- /* Set SW1AB standby voltage to 0.975V */
- pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®);
- reg &= ~0x3f;
- reg |= 0x1b;
- pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
-
- /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PUZE_100_SW1ABCONF, ®);
- reg &= ~0xc0;
- reg |= 0x40;
- pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
-
- /* Set SW1C standby voltage to 0.975V */
- pmic_reg_read(p, PFUZE100_SW1CSTBY, ®);
- reg &= ~0x3f;
- reg |= 0x1b;
- pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
-
- /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PFUZE100_SW1CCONF, ®);
- reg &= ~0xc0;
- reg |= 0x40;
- pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
+ p = pfuze_common_init(I2C_PMIC);
+ if (!p)
+ return -ENODEV;
/* Enable power of VGEN5 3V3, needed for SD3 */
pmic_reg_read(p, PFUZE100_VGEN5VOL, ®);
- reg &= ~0x1F;
- reg |= 0x1F;
+ reg &= ~LDO_VOL_MASK;
+ reg |= (LDOB_3_30V | (1 << LDO_EN));
pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
return 0;
int board_early_init_f(void)
{
setup_iomux_uart();
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
/* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */
imx_iomux_v3_setup_multiple_pads(peri_3v3_pads,
return 0;
}
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+static struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC2_BASE_ADDR, 0, 4},
+ {USDHC3_BASE_ADDR},
{USDHC4_BASE_ADDR},
};
+#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10)
+#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11)
+#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21)
+
int board_mmc_getcd(struct mmc *mmc)
{
- return 1; /* Assume boot SD always present */
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ ret = 1; /* Assume uSDHC2 is always present */
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = !gpio_get_value(USDHC4_CD_GPIO);
+ break;
+ }
+
+ return ret;
}
int board_mmc_init(bd_t *bis)
{
- imx_iomux_v3_setup_multiple_pads(usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ int i, ret;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 USDHC2
+ * mmc1 USDHC3
+ * mmc2 USDHC4
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ gpio_direction_output(USDHC3_PWR_GPIO, 1);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ gpio_direction_input(USDHC4_CD_GPIO);
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) than supported by the board\n", i + 1);
+ return -EINVAL;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
}
+
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#ifdef CONFIG_SYS_I2C_MXC
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
return 0;
}
int board_late_init(void)
{
- pfuze_init();
-
return 0;
}
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_del_flexcan(blob);
fdt_disable_uart1(blob);
}
+
+ return 0;
}
#endif
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
/* Update the WM8776 node's clock frequency property */
ft_codec_setup(blob, "wlf,wm8776");
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
fdt_fixup_fman_ethernet(blob);
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
extern void ft_pci_board_setup(void *blob);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
const char *soc_usb_compat = "fsl-usb2-dr";
int err, usb1_off, usb2_off;
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_elbc_compat,
- fdt_strerror(off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_elbc_compat);
+ return off;
}
err = fdt_del_node(blob, off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_elbc_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n",
+ soc_elbc_compat);
+ return err;
}
- return;
+ return 0;
}
#endif
/* Delete USB2 node as it is muxed with eLBC */
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
if (usb1_off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_usb_compat,
- fdt_strerror(usb1_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb1_off;
}
usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
soc_usb_compat);
if (usb2_off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_usb_compat,
- fdt_strerror(usb2_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
- if (err < 0)
- printf("WARNING: could not remove %s: %s.\n",
- soc_usb_compat, fdt_strerror(err));
+ if (err < 0) {
+ printf("WARNING: could not remove %s\n", soc_usb_compat);
+ return err;
+ }
+
+ return 0;
}
+
#endif
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_elbc_compat,
- fdt_strerror(off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_elbc_compat);
+ return off;
}
err = fdt_del_node(blob, off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_elbc_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n",
+ soc_elbc_compat);
+ return err;
}
- return;
+ return 0;
}
#endif
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
if (usb1_off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_usb_compat,
- fdt_strerror(usb1_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb1_off;
}
usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
soc_usb_compat);
if (usb2_off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_usb_compat,
- fdt_strerror(usb2_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_usb_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n", soc_usb_compat);
+ return err;
}
+ return 0;
}
#endif
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_board_fixup_qe_pins(blob);
#endif
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_HAS_FSL_DR_USB
fdt_fixup_dr_usb(blob, bd);
#endif
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ return 0;
}
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
void qixis_dump_switch(void)
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ return 0;
}
#ifdef CONFIG_DEEP_SLEEP
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_liodn(blob);
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+++ /dev/null
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2013 Gateworks Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-
-/* set the default clock gate to save power */
-DATA 4, CCM_CCGR0, 0x00C03F3F
-DATA 4, CCM_CCGR1, 0x0030FC03
-DATA 4, CCM_CCGR2, 0x0FFFC000
-DATA 4, CCM_CCGR3, 0x3FF00000
-DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */
-DATA 4, CCM_CCGR5, 0x0F0000C3
-DATA 4, CCM_CCGR6, 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
-DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en = 1 --> CKO1 enabled
- * cko1_div = 111 --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4, CCM_CCOSR, 0x000000fb
* - board (full model from EEPROM)
* - peripherals removed from DTB if not loaded on board (per EEPROM config)
*/
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
struct ventana_board_info *info = &ventana_info;
struct ventana_eeprom_config *cfg;
if (getenv("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
- return;
+ return 0;
}
/* Update partition nodes using info from mtdparts env var */
if (!model) {
puts("invalid board info: Leaving FDT fully enabled\n");
- return;
+ return 0;
}
printf(" Adjusting FDT per EEPROM for %s...\n", model);
*/
if (getenv("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
- return;
+ return 0;
}
cfg = econfig;
while (cfg->name) {
}
cfg++;
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
+++ /dev/null
-/*
- * Copyright (C) 2013 Gateworks Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd, nand, sata
- */
-#ifdef CONFIG_SPI_FLASH
-BOOT_FROM spi
-#else
-BOOT_FROM nand
-#endif
-
-#define __ASSEMBLY__
-#include <config.h>
-#include "asm/arch/iomux.h"
-#include "asm/arch/crm_regs.h"
-#include "clocks.cfg"
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
+#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/mx6-pins.h>
mx6_dram_cfg(&sysinfo, calib, mem);
}
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF00000, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
/*
* called from C runtime startup code (arch/arm/lib/crt0.S:_main)
* - we have a stack and a place to store GD, both in SRAM
/* setup AIPS and disable watchdog */
arch_cpu_init();
+ ccgr_init();
+ gpr_init();
+
/* iomux and setup of i2c */
board_early_init_f();
i2c_setup_iomux();
#include "../common/osd.h"
#include "../common/mclink.h"
+#include "../common/phy.h"
#include <i2c.h>
#include <pca953x.h>
unsigned int mclink_fpgacount;
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-static int setup_88e1518(const char *bus, unsigned char addr);
-
int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
{
int res;
unsigned feature_carriers;
unsigned feature_video_channels;
- int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
+ int legacy = get_fpga_state(fpga) & FPGA_STATE_PLATFORM;
- FPGA_GET_REG(0, versions, &versions);
- FPGA_GET_REG(0, fpga_version, &fpga_version);
- FPGA_GET_REG(0, fpga_features, &fpga_features);
+ FPGA_GET_REG(fpga, versions, &versions);
+ FPGA_GET_REG(fpga, fpga_version, &fpga_version);
+ FPGA_GET_REG(fpga, fpga_features, &fpga_features);
unit_type = (versions & 0xf000) >> 12;
feature_compression = (fpga_features & 0xe000) >> 13;
unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
u16 fpga_features;
- int feature_carrier_speed = fpga_features & (1<<4);
+ int feature_carrier_speed;
bool ch0_rgmii2_present = false;
FPGA_GET_REG(0, fpga_features, &fpga_features);
+ feature_carrier_speed = fpga_features & (1<<4);
if (!legacy) {
/* Turn on Parade DP501 */
int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
sizeof(bb_miiphy_buses[0]);
-
-enum {
- MIICMD_SET,
- MIICMD_MODIFY,
- MIICMD_VERIFY_VALUE,
- MIICMD_WAIT_FOR_VALUE,
-};
-
-struct mii_setupcmd {
- u8 token;
- u8 reg;
- u16 data;
- u16 mask;
- u32 timeout;
-};
-
-/*
- * verify we are talking to a 88e1518
- */
-struct mii_setupcmd verify_88e1518[] = {
- { MIICMD_SET, 22, 0x0000 },
- { MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
- { MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
-};
-
-/*
- * workaround for erratum mentioned in 88E1518 release notes
- */
-struct mii_setupcmd fixup_88e1518[] = {
- { MIICMD_SET, 22, 0x00ff },
- { MIICMD_SET, 17, 0x214b },
- { MIICMD_SET, 16, 0x2144 },
- { MIICMD_SET, 17, 0x0c28 },
- { MIICMD_SET, 16, 0x2146 },
- { MIICMD_SET, 17, 0xb233 },
- { MIICMD_SET, 16, 0x214d },
- { MIICMD_SET, 17, 0xcc0c },
- { MIICMD_SET, 16, 0x2159 },
- { MIICMD_SET, 22, 0x00fb },
- { MIICMD_SET, 7, 0xc00d },
- { MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * default initialization:
- * - set RGMII receive timing to "receive clock transition when data stable"
- * - set RGMII transmit timing to "transmit clock internally delayed"
- * - set RGMII output impedance target to 78,8 Ohm
- * - run output impedance calibration
- * - set autonegotiation advertise to 1000FD only
- */
-struct mii_setupcmd default_88e1518[] = {
- { MIICMD_SET, 22, 0x0002 },
- { MIICMD_MODIFY, 21, 0x0030, 0x0030 },
- { MIICMD_MODIFY, 25, 0x0000, 0x0003 },
- { MIICMD_MODIFY, 24, 0x8000, 0x8000 },
- { MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
- { MIICMD_SET, 22, 0x0000 },
- { MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
- { MIICMD_MODIFY, 9, 0x0200, 0x0300 },
-};
-
-/*
- * turn off CLK125 for PHY daughterboard
- */
-struct mii_setupcmd ch1fix_88e1518[] = {
- { MIICMD_SET, 22, 0x0002 },
- { MIICMD_MODIFY, 16, 0x0006, 0x0006 },
- { MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * perform copper software reset
- */
-struct mii_setupcmd swreset_88e1518[] = {
- { MIICMD_SET, 22, 0x0000 },
- { MIICMD_MODIFY, 0, 0x8000, 0x8000 },
- { MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
-};
-
-static int process_setupcmd(const char *bus, unsigned char addr,
- struct mii_setupcmd *setupcmd)
-{
- int res;
- u8 reg = setupcmd->reg;
- u16 data = setupcmd->data;
- u16 mask = setupcmd->mask;
- u32 timeout = setupcmd->timeout;
- u16 orig_data;
- unsigned long start;
-
- debug("mii %s:%u reg %2u ", bus, addr, reg);
-
- switch (setupcmd->token) {
- case MIICMD_MODIFY:
- res = miiphy_read(bus, addr, reg, &orig_data);
- if (res)
- break;
- debug("is %04x. (value %04x mask %04x) ", orig_data, data,
- mask);
- data = (orig_data & ~mask) | (data & mask);
- case MIICMD_SET:
- debug("=> %04x\n", data);
- res = miiphy_write(bus, addr, reg, data);
- break;
- case MIICMD_VERIFY_VALUE:
- res = miiphy_read(bus, addr, reg, &orig_data);
- if (res)
- break;
- if ((orig_data & mask) != (data & mask))
- res = -1;
- debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
- orig_data, res ? "FAIL" : "PASS");
- break;
- case MIICMD_WAIT_FOR_VALUE:
- res = -1;
- start = get_timer(0);
- while ((res != 0) && (get_timer(start) < timeout)) {
- res = miiphy_read(bus, addr, reg, &orig_data);
- if (res)
- continue;
- if ((orig_data & mask) != (data & mask))
- res = -1;
- }
- debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
- mask, orig_data, res ? "FAIL" : "PASS",
- get_timer(start));
- break;
- default:
- res = -1;
- break;
- }
-
- return res;
-}
-
-static int process_setup(const char *bus, unsigned char addr,
- struct mii_setupcmd *setupcmd, unsigned int count)
-{
- int res = 0;
- unsigned int k;
-
- for (k = 0; k < count; ++k) {
- res = process_setupcmd(bus, addr, &setupcmd[k]);
- if (res) {
- printf("mii cmd %u on bus %s addr %u failed, aborting setup",
- setupcmd[k].token, bus, addr);
- break;
- }
- }
-
- return res;
-}
-
-static int setup_88e1518(const char *bus, unsigned char addr)
-{
- int res;
-
- res = process_setup(bus, addr,
- verify_88e1518, ARRAY_SIZE(verify_88e1518));
- if (res)
- return res;
-
- res = process_setup(bus, addr,
- fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
- if (res)
- return res;
-
- res = process_setup(bus, addr,
- default_88e1518, ARRAY_SIZE(default_88e1518));
- if (res)
- return res;
-
- if (addr) {
- res = process_setup(bus, addr,
- ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
- if (res)
- return res;
- }
-
- res = process_setup(bus, addr,
- swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
- if (res)
- return res;
-
- return 0;
-}
#
obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
+obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
obj-$(CONFIG_IO) += miiphybb.o
obj-$(CONFIG_IO64) += miiphybb.o
-obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o
+obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o
obj-$(CONFIG_DLVISION_10G) += osd.o
obj-$(CONFIG_CONTROLCENTERD) += dp501.o
+obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+
+#include <gdsys_fpga.h>
+
+enum {
+ STATE_TX_PACKET_BUILDING = 1<<0,
+ STATE_TX_TRANSMITTING = 1<<1,
+ STATE_TX_BUFFER_FULL = 1<<2,
+ STATE_TX_ERR = 1<<3,
+ STATE_RECEIVE_TIMEOUT = 1<<4,
+ STATE_PROC_RX_STORE_TIMEOUT = 1<<5,
+ STATE_PROC_RX_RECEIVE_TIMEOUT = 1<<6,
+ STATE_RX_DIST_ERR = 1<<7,
+ STATE_RX_LENGTH_ERR = 1<<8,
+ STATE_RX_FRAME_CTR_ERR = 1<<9,
+ STATE_RX_FCS_ERR = 1<<10,
+ STATE_RX_PACKET_DROPPED = 1<<11,
+ STATE_RX_DATA_LAST = 1<<12,
+ STATE_RX_DATA_FIRST = 1<<13,
+ STATE_RX_DATA_AVAILABLE = 1<<15,
+};
+
+enum {
+ CTRL_PROC_RECEIVE_ENABLE = 1<<12,
+ CTRL_FLUSH_TRANSMIT_BUFFER = 1<<15,
+};
+
+enum {
+ IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = 1<<5,
+ IRQ_CPU_PACKET_TRANSMITTED_EVENT = 1<<6,
+ IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = 1<<7,
+ IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = 1<<8,
+};
+
+struct io_generic_packet {
+ u16 target_address;
+ u16 source_address;
+ u8 packet_type;
+ u8 bc;
+ u16 packet_length;
+} __attribute__((__packed__));
+
+unsigned long long rx_ctr;
+unsigned long long tx_ctr;
+unsigned long long err_ctr;
+
+static void io_check_status(unsigned int fpga, u16 status, bool silent)
+{
+ u16 mask = STATE_RX_DIST_ERR | STATE_RX_LENGTH_ERR |
+ STATE_RX_FRAME_CTR_ERR | STATE_RX_FCS_ERR |
+ STATE_RX_PACKET_DROPPED | STATE_TX_ERR;
+
+ if (!(status & mask)) {
+ FPGA_SET_REG(fpga, ep.rx_tx_status, status);
+ return;
+ }
+
+ err_ctr++;
+ FPGA_SET_REG(fpga, ep.rx_tx_status, status);
+
+ if (silent)
+ return;
+
+ if (status & STATE_RX_PACKET_DROPPED)
+ printf("RX_PACKET_DROPPED, status %04x\n", status);
+
+ if (status & STATE_RX_DIST_ERR)
+ printf("RX_DIST_ERR\n");
+ if (status & STATE_RX_LENGTH_ERR)
+ printf("RX_LENGTH_ERR\n");
+ if (status & STATE_RX_FRAME_CTR_ERR)
+ printf("RX_FRAME_CTR_ERR\n");
+ if (status & STATE_RX_FCS_ERR)
+ printf("RX_FCS_ERR\n");
+
+ if (status & STATE_TX_ERR)
+ printf("TX_ERR\n");
+}
+
+static void io_send(unsigned int fpga, unsigned int size)
+{
+ unsigned int k;
+ struct io_generic_packet packet = {
+ .source_address = 1,
+ .packet_type = 1,
+ .packet_length = size,
+ };
+ u16 *p = (u16 *)&packet;
+
+ for (k = 0; k < sizeof(packet) / 2; ++k)
+ FPGA_SET_REG(fpga, ep.transmit_data, *p++);
+
+ for (k = 0; k < (size + 1) / 2; ++k)
+ FPGA_SET_REG(fpga, ep.transmit_data, k);
+
+ FPGA_SET_REG(fpga, ep.rx_tx_control,
+ CTRL_PROC_RECEIVE_ENABLE | CTRL_FLUSH_TRANSMIT_BUFFER);
+
+ tx_ctr++;
+}
+
+static void io_receive(unsigned int fpga)
+{
+ unsigned int k = 0;
+ u16 rx_tx_status;
+
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+
+ while (rx_tx_status & STATE_RX_DATA_AVAILABLE) {
+ u16 rx;
+
+ if (rx_tx_status & STATE_RX_DATA_LAST)
+ rx_ctr++;
+
+ FPGA_GET_REG(fpga, ep.receive_data, &rx);
+
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+
+ ++k;
+ }
+}
+
+static void io_reflect(unsigned int fpga)
+{
+ u16 buffer[128];
+
+ unsigned int k = 0;
+ unsigned int n;
+ u16 rx_tx_status;
+
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+
+ while (rx_tx_status & STATE_RX_DATA_AVAILABLE) {
+ FPGA_GET_REG(fpga, ep.receive_data, &buffer[k++]);
+ if (rx_tx_status & STATE_RX_DATA_LAST)
+ break;
+
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+ }
+
+ if (!k)
+ return;
+
+ for (n = 0; n < k; ++n)
+ FPGA_SET_REG(fpga, ep.transmit_data, buffer[n]);
+
+ FPGA_SET_REG(fpga, ep.rx_tx_control,
+ CTRL_PROC_RECEIVE_ENABLE | CTRL_FLUSH_TRANSMIT_BUFFER);
+
+ tx_ctr++;
+}
+
+/*
+ * FPGA io-endpoint reflector
+ *
+ * Syntax:
+ * ioreflect {fpga} {reportrate}
+ */
+int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int fpga;
+ unsigned int rate = 0;
+ unsigned long long last_seen = 0;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ fpga = simple_strtoul(argv[1], NULL, 10);
+
+ /*
+ * If another parameter, it is the report rate in packets.
+ */
+ if (argc > 2)
+ rate = simple_strtoul(argv[2], NULL, 10);
+
+ /* enable receive path */
+ FPGA_SET_REG(fpga, ep.rx_tx_control, CTRL_PROC_RECEIVE_ENABLE);
+
+ /* set device address to dummy 1*/
+ FPGA_SET_REG(fpga, ep.device_address, 1);
+
+ rx_ctr = 0; tx_ctr = 0; err_ctr = 0;
+
+ while (1) {
+ u16 top_int;
+ u16 rx_tx_status;
+
+ FPGA_GET_REG(fpga, top_interrupt, &top_int);
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+
+ io_check_status(fpga, rx_tx_status, true);
+ if ((top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) &&
+ (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS))
+ io_reflect(fpga);
+
+ if (rate) {
+ if (!(tx_ctr % rate) && (tx_ctr != last_seen))
+ printf("refl %llu, err %llu\n", tx_ctr,
+ err_ctr);
+ last_seen = tx_ctr;
+ }
+
+ if (ctrlc())
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * FPGA io-endpoint looptest
+ *
+ * Syntax:
+ * ioloop {fpga} {size} {rate}
+ */
+#define DISP_LINE_LEN 16
+int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int fpga;
+ unsigned int size;
+ unsigned int rate = 0;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ /*
+ * FPGA is specified since argc > 2
+ */
+ fpga = simple_strtoul(argv[1], NULL, 10);
+
+ /*
+ * packet size is specified since argc > 2
+ */
+ size = simple_strtoul(argv[2], NULL, 10);
+
+ /*
+ * If another parameter, it is the test rate in packets per second.
+ */
+ if (argc > 3)
+ rate = simple_strtoul(argv[3], NULL, 10);
+
+ /* enable receive path */
+ FPGA_SET_REG(fpga, ep.rx_tx_control, CTRL_PROC_RECEIVE_ENABLE);
+
+ /* set device address to dummy 1*/
+ FPGA_SET_REG(fpga, ep.device_address, 1);
+
+ rx_ctr = 0; tx_ctr = 0; err_ctr = 0;
+
+ while (1) {
+ u16 top_int;
+ u16 rx_tx_status;
+
+ FPGA_GET_REG(fpga, top_interrupt, &top_int);
+ FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status);
+
+ io_check_status(fpga, rx_tx_status, false);
+ if (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS)
+ io_send(fpga, size);
+ if (top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS)
+ io_receive(fpga);
+
+ if (rate) {
+ if (ctrlc())
+ break;
+ udelay(1000000 / rate);
+ if (!(tx_ctr % rate))
+ printf("d %lld, tx %llu, rx %llu, err %llu\n",
+ tx_ctr - rx_ctr, tx_ctr, rx_ctr,
+ err_ctr);
+ }
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ ioloop, 4, 0, do_ioloop,
+ "fpga io-endpoint looptest",
+ "fpga packetsize [packets/sec]"
+);
+
+U_BOOT_CMD(
+ ioreflect, 3, 0, do_ioreflect,
+ "fpga io-endpoint reflector",
+ "fpga reportrate"
+);
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <gdsys_fpga.h>
+#include <miiphy.h>
+
+#include "ihs_mdio.h"
+
+static int ihs_mdio_idle(struct mii_dev *bus)
+{
+ struct ihs_mdio_info *info = bus->priv;
+ u16 val;
+ unsigned int ctr = 0;
+
+ do {
+ FPGA_GET_REG(info->fpga, mdio.control, &val);
+ udelay(100);
+ if (ctr++ > 10)
+ return -1;
+ } while (!(val & (1 << 12)));
+
+ return 0;
+}
+
+static int ihs_mdio_reset(struct mii_dev *bus)
+{
+ ihs_mdio_idle(bus);
+
+ return 0;
+}
+
+static int ihs_mdio_read(struct mii_dev *bus, int addr, int dev_addr,
+ int regnum)
+{
+ struct ihs_mdio_info *info = bus->priv;
+ u16 val;
+
+ ihs_mdio_idle(bus);
+
+ FPGA_SET_REG(info->fpga, mdio.control,
+ ((addr & 0x1f) << 5) | (regnum & 0x1f) | (2 << 10));
+
+ /* wait for rx data available */
+ udelay(100);
+
+ FPGA_GET_REG(info->fpga, mdio.rx_data, &val);
+
+ return val;
+}
+
+static int ihs_mdio_write(struct mii_dev *bus, int addr, int dev_addr,
+ int regnum, u16 value)
+{
+ struct ihs_mdio_info *info = bus->priv;
+
+ ihs_mdio_idle(bus);
+
+ FPGA_SET_REG(info->fpga, mdio.address_data, value);
+ FPGA_SET_REG(info->fpga, mdio.control,
+ ((addr & 0x1f) << 5) | (regnum & 0x1f) | (1 << 10));
+
+ return 0;
+}
+
+int ihs_mdio_init(struct ihs_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FSL MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = ihs_mdio_read;
+ bus->write = ihs_mdio_write;
+ bus->reset = ihs_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info;
+
+ return mdio_register(bus);
+}
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _IHS_MDIO_H_
+#define _IHS_MDIO_H_
+
+struct ihs_mdio_info {
+ u32 fpga;
+ char *name;
+};
+
+int ihs_mdio_init(struct ihs_mdio_info *info);
+
+#endif
{
u16 version;
u16 features;
- u8 value;
int old_bus = i2c_get_bus_num();
bool pixclock_present = false;
bool output_driver_present = false;
#ifdef CONFIG_SYS_CH7301_I2C
i2c_set_bus_num(ch7301_i2c[screen]);
if (!i2c_probe(CH7301_I2C_ADDR)) {
- value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID);
+ u8 value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID);
+
if (value == 0x17) {
i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08);
i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16);
#ifdef CONFIG_SYS_SIL1178_I2C
i2c_set_bus_num(sil1178_i2c[screen]);
if (!i2c_probe(SIL1178_SLAVE_I2C_ADDRESS)) {
- value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02);
- if (value == 0x06) {
+ if (i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02) == 0x06) {
/*
* magic initialization sequence,
* adapted from datasheet
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <miiphy.h>
+
+enum {
+ MIICMD_SET,
+ MIICMD_MODIFY,
+ MIICMD_VERIFY_VALUE,
+ MIICMD_WAIT_FOR_VALUE,
+};
+
+struct mii_setupcmd {
+ u8 token;
+ u8 reg;
+ u16 data;
+ u16 mask;
+ u32 timeout;
+};
+
+/*
+ * verify we are talking to a 88e1518
+ */
+struct mii_setupcmd verify_88e1518[] = {
+ { MIICMD_SET, 22, 0x0000 },
+ { MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
+ { MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
+};
+
+/*
+ * workaround for erratum mentioned in 88E1518 release notes
+ */
+struct mii_setupcmd fixup_88e1518[] = {
+ { MIICMD_SET, 22, 0x00ff },
+ { MIICMD_SET, 17, 0x214b },
+ { MIICMD_SET, 16, 0x2144 },
+ { MIICMD_SET, 17, 0x0c28 },
+ { MIICMD_SET, 16, 0x2146 },
+ { MIICMD_SET, 17, 0xb233 },
+ { MIICMD_SET, 16, 0x214d },
+ { MIICMD_SET, 17, 0xcc0c },
+ { MIICMD_SET, 16, 0x2159 },
+ { MIICMD_SET, 22, 0x00fb },
+ { MIICMD_SET, 7, 0xc00d },
+ { MIICMD_SET, 22, 0x0000 },
+};
+
+/*
+ * default initialization:
+ * - set RGMII receive timing to "receive clock transition when data stable"
+ * - set RGMII transmit timing to "transmit clock internally delayed"
+ * - set RGMII output impedance target to 78,8 Ohm
+ * - run output impedance calibration
+ * - set autonegotiation advertise to 1000FD only
+ */
+struct mii_setupcmd default_88e1518[] = {
+ { MIICMD_SET, 22, 0x0002 },
+ { MIICMD_MODIFY, 21, 0x0030, 0x0030 },
+ { MIICMD_MODIFY, 25, 0x0000, 0x0003 },
+ { MIICMD_MODIFY, 24, 0x8000, 0x8000 },
+ { MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
+ { MIICMD_SET, 22, 0x0000 },
+ { MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
+ { MIICMD_MODIFY, 9, 0x0200, 0x0300 },
+};
+
+/*
+ * turn off CLK125 for PHY daughterboard
+ */
+struct mii_setupcmd ch1fix_88e1518[] = {
+ { MIICMD_SET, 22, 0x0002 },
+ { MIICMD_MODIFY, 16, 0x0006, 0x0006 },
+ { MIICMD_SET, 22, 0x0000 },
+};
+
+/*
+ * perform copper software reset
+ */
+struct mii_setupcmd swreset_88e1518[] = {
+ { MIICMD_SET, 22, 0x0000 },
+ { MIICMD_MODIFY, 0, 0x8000, 0x8000 },
+ { MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
+};
+
+/*
+ * special one for 88E1514:
+ * Force SGMII to Copper mode
+ */
+struct mii_setupcmd mii_to_copper_88e1514[] = {
+ { MIICMD_SET, 22, 0x0012 },
+ { MIICMD_MODIFY, 20, 0x0001, 0x0007 },
+ { MIICMD_MODIFY, 20, 0x8000, 0x8000 },
+ { MIICMD_SET, 22, 0x0000 },
+};
+
+/*
+ * turn off SGMII auto-negotiation
+ */
+struct mii_setupcmd sgmii_autoneg_off_88e1518[] = {
+ { MIICMD_SET, 22, 0x0001 },
+ { MIICMD_MODIFY, 0, 0x0000, 0x1000 },
+ { MIICMD_MODIFY, 0, 0x8000, 0x8000 },
+ { MIICMD_SET, 22, 0x0000 },
+};
+
+/*
+ * invert LED2 polarity
+ */
+struct mii_setupcmd invert_led2_88e1514[] = {
+ { MIICMD_SET, 22, 0x0003 },
+ { MIICMD_MODIFY, 17, 0x0030, 0x0010 },
+ { MIICMD_SET, 22, 0x0000 },
+};
+
+static int process_setupcmd(const char *bus, unsigned char addr,
+ struct mii_setupcmd *setupcmd)
+{
+ int res;
+ u8 reg = setupcmd->reg;
+ u16 data = setupcmd->data;
+ u16 mask = setupcmd->mask;
+ u32 timeout = setupcmd->timeout;
+ u16 orig_data;
+ unsigned long start;
+
+ debug("mii %s:%u reg %2u ", bus, addr, reg);
+
+ switch (setupcmd->token) {
+ case MIICMD_MODIFY:
+ res = miiphy_read(bus, addr, reg, &orig_data);
+ if (res)
+ break;
+ debug("is %04x. (value %04x mask %04x) ", orig_data, data,
+ mask);
+ data = (orig_data & ~mask) | (data & mask);
+ /* fallthrough */
+ case MIICMD_SET:
+ debug("=> %04x\n", data);
+ res = miiphy_write(bus, addr, reg, data);
+ break;
+ case MIICMD_VERIFY_VALUE:
+ res = miiphy_read(bus, addr, reg, &orig_data);
+ if (res)
+ break;
+ if ((orig_data & mask) != (data & mask))
+ res = -1;
+ debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
+ orig_data, res ? "FAIL" : "PASS");
+ break;
+ case MIICMD_WAIT_FOR_VALUE:
+ res = -1;
+ start = get_timer(0);
+ while ((res != 0) && (get_timer(start) < timeout)) {
+ res = miiphy_read(bus, addr, reg, &orig_data);
+ if (res)
+ continue;
+ if ((orig_data & mask) != (data & mask))
+ res = -1;
+ }
+ debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
+ mask, orig_data, res ? "FAIL" : "PASS",
+ get_timer(start));
+ break;
+ default:
+ res = -1;
+ break;
+ }
+
+ return res;
+}
+
+static int process_setup(const char *bus, unsigned char addr,
+ struct mii_setupcmd *setupcmd, unsigned int count)
+{
+ int res = 0;
+ unsigned int k;
+
+ for (k = 0; k < count; ++k) {
+ res = process_setupcmd(bus, addr, &setupcmd[k]);
+ if (res) {
+ printf("mii cmd %u on bus %s addr %u failed, aborting setup\n",
+ setupcmd[k].token, bus, addr);
+ break;
+ }
+ }
+
+ return res;
+}
+
+int setup_88e1518(const char *bus, unsigned char addr)
+{
+ int res;
+
+ res = process_setup(bus, addr,
+ verify_88e1518, ARRAY_SIZE(verify_88e1518));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ default_88e1518, ARRAY_SIZE(default_88e1518));
+ if (res)
+ return res;
+
+ if (addr) {
+ res = process_setup(bus, addr,
+ ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
+ if (res)
+ return res;
+ }
+
+ res = process_setup(bus, addr,
+ swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
+ if (res)
+ return res;
+
+ return 0;
+}
+
+int setup_88e1514(const char *bus, unsigned char addr)
+{
+ int res;
+
+ res = process_setup(bus, addr,
+ verify_88e1518, ARRAY_SIZE(verify_88e1518));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ mii_to_copper_88e1514,
+ ARRAY_SIZE(mii_to_copper_88e1514));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ sgmii_autoneg_off_88e1518,
+ ARRAY_SIZE(sgmii_autoneg_off_88e1518));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ invert_led2_88e1514,
+ ARRAY_SIZE(invert_led2_88e1514));
+ if (res)
+ return res;
+
+ res = process_setup(bus, addr,
+ default_88e1518, ARRAY_SIZE(default_88e1518));
+ if (res)
+ return res;
+
+ if (addr) {
+ res = process_setup(bus, addr,
+ ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
+ if (res)
+ return res;
+ }
+
+ res = process_setup(bus, addr,
+ swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
+ if (res)
+ return res;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PHY_H_
+#define _PHY_H_
+
+int setup_88e1514(const char *bus, unsigned char addr);
+int setup_88e1518(const char *bus, unsigned char addr);
+
+#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
extern void __ft_board_setup(void *blob, bd_t *bd);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
__ft_board_setup(blob, bd);
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
"disabled", sizeof("disabled"), 1);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
--- /dev/null
+if TARGET_HRCON
+
+config SYS_BOARD
+ default "mpc8308"
+
+config SYS_VENDOR
+ default "gdsys"
+
+config SYS_CONFIG_NAME
+ default "hrcon"
+
+endif
--- /dev/null
+MPC8308 BOARD
+M: Dirk Eibach <eibach@gdsys.de>
+S: Maintained
+F: board/gdsys/mpc8308/
+F: include/configs/hrcon.h
+F: configs/hrcon_defconfig
--- /dev/null
+#
+# (C) Copyright 2014
+# Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := mpc8308.o sdram.o
+obj-$(CONFIG_HRCON) += hrcon.o
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <spi.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pci.h>
+#include <mpc83xx.h>
+#include <fsl_esdhc.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+
+#include "mpc8308.h"
+
+#include <gdsys_fpga.h>
+
+#include "../common/osd.h"
+#include "../common/mclink.h"
+#include "../common/phy.h"
+
+#include <pca953x.h>
+#include <pca9698.h>
+
+#include <miiphy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_MUX_CHANNELS 2
+
+enum {
+ UNITTYPE_MAIN_SERVER = 0,
+ UNITTYPE_MAIN_USER = 1,
+ UNITTYPE_VIDEO_SERVER = 2,
+ UNITTYPE_VIDEO_USER = 3,
+};
+
+enum {
+ UNITTYPEPCB_DVI = 0,
+ UNITTYPEPCB_DP_165 = 1,
+ UNITTYPEPCB_DP_300 = 2,
+ UNITTYPEPCB_HDMI = 3,
+};
+
+enum {
+ HWVER_100 = 0,
+ HWVER_110 = 1,
+};
+
+enum {
+ FPGA_HWVER_200 = 0,
+ FPGA_HWVER_210 = 1,
+};
+
+enum {
+ COMPRESSION_NONE = 0,
+ COMPRESSION_TYPE1_DELTA = 1,
+ COMPRESSION_TYPE1_TYPE2_DELTA = 3,
+};
+
+enum {
+ AUDIO_NONE = 0,
+ AUDIO_TX = 1,
+ AUDIO_RX = 2,
+ AUDIO_RXTX = 3,
+};
+
+enum {
+ SYSCLK_147456 = 0,
+};
+
+enum {
+ RAM_DDR2_32 = 0,
+ RAM_DDR3_32 = 1,
+};
+
+enum {
+ CARRIER_SPEED_1G = 0,
+ CARRIER_SPEED_2_5G = 1,
+};
+
+enum {
+ MCFPGA_DONE = 1 << 0,
+ MCFPGA_INIT_N = 1 << 1,
+ MCFPGA_PROGRAM_N = 1 << 2,
+ MCFPGA_UPDATE_ENABLE_N = 1 << 3,
+ MCFPGA_RESET_N = 1 << 4,
+};
+
+enum {
+ GPIO_MDC = 1 << 14,
+ GPIO_MDIO = 1 << 15,
+};
+
+unsigned int mclink_fpgacount;
+struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
+
+int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
+{
+ int res;
+
+ switch (fpga) {
+ case 0:
+ out_le16(reg, data);
+ break;
+ default:
+ res = mclink_send(fpga - 1, regoff, data);
+ if (res < 0) {
+ printf("mclink_send reg %02lx data %04x returned %d\n",
+ regoff, data, res);
+ return res;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
+{
+ int res;
+
+ switch (fpga) {
+ case 0:
+ *data = in_le16(reg);
+ break;
+ default:
+ if (fpga > mclink_fpgacount)
+ return -EINVAL;
+ res = mclink_receive(fpga - 1, regoff, data);
+ if (res < 0) {
+ printf("mclink_receive reg %02lx returned %d\n",
+ regoff, res);
+ return res;
+ }
+ }
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+ bool hw_type_cat = pca9698_get_value(0x20, 20);
+
+ puts("Board: ");
+
+ printf("HRCon %s", hw_type_cat ? "CAT" : "Fiber");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+static void print_fpga_info(unsigned int fpga, bool rgmii2_present)
+{
+ u16 versions;
+ u16 fpga_version;
+ u16 fpga_features;
+ unsigned unit_type;
+ unsigned unit_type_pcb_video;
+ unsigned hardware_version;
+ unsigned feature_compression;
+ unsigned feature_osd;
+ unsigned feature_audio;
+ unsigned feature_sysclock;
+ unsigned feature_ramconfig;
+ unsigned feature_carrier_speed;
+ unsigned feature_carriers;
+ unsigned feature_video_channels;
+
+ FPGA_GET_REG(fpga, versions, &versions);
+ FPGA_GET_REG(fpga, fpga_version, &fpga_version);
+ FPGA_GET_REG(fpga, fpga_features, &fpga_features);
+
+ unit_type = (versions & 0xf000) >> 12;
+ unit_type_pcb_video = (versions & 0x01c0) >> 6;
+ feature_compression = (fpga_features & 0xe000) >> 13;
+ feature_osd = fpga_features & (1<<11);
+ feature_audio = (fpga_features & 0x0600) >> 9;
+ feature_sysclock = (fpga_features & 0x0180) >> 7;
+ feature_ramconfig = (fpga_features & 0x0060) >> 5;
+ feature_carrier_speed = fpga_features & (1<<4);
+ feature_carriers = (fpga_features & 0x000c) >> 2;
+ feature_video_channels = fpga_features & 0x0003;
+
+ switch (unit_type) {
+ case UNITTYPE_MAIN_USER:
+ printf("Mainchannel");
+ break;
+
+ case UNITTYPE_VIDEO_USER:
+ printf("Videochannel");
+ break;
+
+ default:
+ printf("UnitType %d(not supported)", unit_type);
+ break;
+ }
+
+ if (unit_type == UNITTYPE_MAIN_USER) {
+ hardware_version =
+ (!!pca9698_get_value(0x20, 24) << 0)
+ | (!!pca9698_get_value(0x20, 25) << 1)
+ | (!!pca9698_get_value(0x20, 26) << 2)
+ | (!!pca9698_get_value(0x20, 27) << 3)
+ | (!!pca9698_get_value(0x20, 28) << 4);
+ switch (hardware_version) {
+ case HWVER_100:
+ printf(" HW-Ver 1.00,");
+ break;
+
+ case HWVER_110:
+ printf(" HW-Ver 1.10,");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported),",
+ hardware_version);
+ break;
+ }
+ if (rgmii2_present)
+ printf(" RGMII2,");
+ }
+
+ if (unit_type == UNITTYPE_VIDEO_USER) {
+ hardware_version = versions & 0x000f;
+ switch (hardware_version) {
+ case FPGA_HWVER_200:
+ printf(" HW-Ver 2.00,");
+ break;
+
+ case FPGA_HWVER_210:
+ printf(" HW-Ver 2.10,");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported),",
+ hardware_version);
+ break;
+ }
+ }
+
+ switch (unit_type_pcb_video) {
+ case UNITTYPEPCB_DVI:
+ printf(" DVI,");
+ break;
+
+ case UNITTYPEPCB_DP_165:
+ printf(" DP 165MPix/s,");
+ break;
+
+ case UNITTYPEPCB_DP_300:
+ printf(" DP 300MPix/s,");
+ break;
+
+ case UNITTYPEPCB_HDMI:
+ printf(" HDMI,");
+ break;
+ }
+
+ printf(" FPGA V %d.%02d\n features:",
+ fpga_version / 100, fpga_version % 100);
+
+
+ switch (feature_compression) {
+ case COMPRESSION_NONE:
+ printf(" no compression");
+ break;
+
+ case COMPRESSION_TYPE1_DELTA:
+ printf(" type1-deltacompression");
+ break;
+
+ case COMPRESSION_TYPE1_TYPE2_DELTA:
+ printf(" type1-deltacompression, type2-inlinecompression");
+ break;
+
+ default:
+ printf(" compression %d(not supported)", feature_compression);
+ break;
+ }
+
+ printf(", %sosd", feature_osd ? "" : "no ");
+
+ switch (feature_audio) {
+ case AUDIO_NONE:
+ printf(", no audio");
+ break;
+
+ case AUDIO_TX:
+ printf(", audio tx");
+ break;
+
+ case AUDIO_RX:
+ printf(", audio rx");
+ break;
+
+ case AUDIO_RXTX:
+ printf(", audio rx+tx");
+ break;
+
+ default:
+ printf(", audio %d(not supported)", feature_audio);
+ break;
+ }
+
+ puts(",\n ");
+
+ switch (feature_sysclock) {
+ case SYSCLK_147456:
+ printf("clock 147.456 MHz");
+ break;
+
+ default:
+ printf("clock %d(not supported)", feature_sysclock);
+ break;
+ }
+
+ switch (feature_ramconfig) {
+ case RAM_DDR2_32:
+ printf(", RAM 32 bit DDR2");
+ break;
+
+ case RAM_DDR3_32:
+ printf(", RAM 32 bit DDR3");
+ break;
+
+ default:
+ printf(", RAM %d(not supported)", feature_ramconfig);
+ break;
+ }
+
+ printf(", %d carrier(s) %s", feature_carriers,
+ feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");
+
+ printf(", %d video channel(s)\n", feature_video_channels);
+}
+
+int last_stage_init(void)
+{
+ int slaves;
+ unsigned int k;
+ unsigned int mux_ch;
+ unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
+ u16 fpga_features;
+ bool hw_type_cat = pca9698_get_value(0x20, 20);
+ bool ch0_rgmii2_present = false;
+
+ FPGA_GET_REG(0, fpga_features, &fpga_features);
+
+ /* Turn on Parade DP501 */
+ pca9698_direction_output(0x20, 10, 1);
+
+ ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
+
+ /* wait for FPGA done */
+ for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
+ unsigned int ctr = 0;
+
+ if (i2c_probe(mclink_controllers[k]))
+ continue;
+
+ while (!(pca953x_get_val(mclink_controllers[k])
+ & MCFPGA_DONE)) {
+ udelay(100000);
+ if (ctr++ > 5) {
+ printf("no done for mclink_controller %d\n", k);
+ break;
+ }
+ }
+ }
+
+ if (hw_type_cat) {
+ miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read,
+ bb_miiphy_write);
+ for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
+ if ((mux_ch == 1) && !ch0_rgmii2_present)
+ continue;
+
+ setup_88e1514(bb_miiphy_buses[0].name, mux_ch);
+ }
+ }
+
+ /* give slave-PLLs and Parade DP501 some time to be up and running */
+ udelay(500000);
+
+ mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
+ slaves = mclink_probe();
+ mclink_fpgacount = 0;
+
+ print_fpga_info(0, ch0_rgmii2_present);
+ osd_probe(0);
+
+ if (slaves <= 0)
+ return 0;
+
+ mclink_fpgacount = slaves;
+
+ for (k = 1; k <= slaves; ++k) {
+ FPGA_GET_REG(k, fpga_features, &fpga_features);
+
+ print_fpga_info(k, false);
+ osd_probe(k);
+ if (hw_type_cat) {
+ miiphy_register(bb_miiphy_buses[k].name,
+ bb_miiphy_read, bb_miiphy_write);
+ setup_88e1514(bb_miiphy_buses[k].name, 0);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * provide access to fpga gpios (for I2C bitbang)
+ * (these may look all too simple but make iocon.h much more readable)
+ */
+void fpga_gpio_set(unsigned int bus, int pin)
+{
+ FPGA_SET_REG(bus, gpio.set, pin);
+}
+
+void fpga_gpio_clear(unsigned int bus, int pin)
+{
+ FPGA_SET_REG(bus, gpio.clear, pin);
+}
+
+int fpga_gpio_get(unsigned int bus, int pin)
+{
+ u16 val;
+
+ FPGA_GET_REG(bus, gpio.read, &val);
+
+ return val & pin;
+}
+
+void mpc8308_init(void)
+{
+ pca9698_direction_output(0x20, 4, 1);
+}
+
+void mpc8308_set_fpga_reset(unsigned state)
+{
+ pca9698_set_value(0x20, 4, state ? 0 : 1);
+}
+
+void mpc8308_setup_hw(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ /*
+ * set "startup-finished"-gpios
+ */
+ setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12)));
+ setbits_be32(&immr->gpio[0].dat, 1 << (31-12));
+}
+
+int mpc8308_get_fpga_done(unsigned fpga)
+{
+ return pca9698_get_value(0x20, 19);
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bd)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+
+ /* Enable cache snooping in eSDHC system configuration register */
+ out_be32(&sysconf->sdhccr, 0x02000000);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+#endif
+
+static struct pci_region pcie_regions_0[] = {
+ {
+ .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+ .size = CONFIG_SYS_PCIE1_MEM_SIZE,
+ .flags = PCI_REGION_MEM,
+ },
+ {
+ .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+ .size = CONFIG_SYS_PCIE1_IO_SIZE,
+ .flags = PCI_REGION_IO,
+ },
+};
+
+void pci_init_board(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+ law83xx_t *pcie_law = sysconf->pcielaw;
+ struct pci_region *pcie_reg[] = { pcie_regions_0 };
+
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
+ /* Deassert the resets in the control register */
+ out_be32(&sysconf->pecr1, 0xE0008000);
+ udelay(2000);
+
+ /* Configure PCI Express Local Access Windows */
+ out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+ out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ mpc83xx_pcie_init(1, pcie_reg);
+}
+
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+ info->portwidth = FLASH_CFI_16BIT;
+ info->chipwidth = FLASH_CFI_BY16;
+ info->interface = FLASH_CFI_X16;
+ return 1;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_dr_usb(blob, bd);
+ fdt_fixup_esdhc(blob, bd);
+
+ return 0;
+}
+#endif
+
+/*
+ * FPGA MII bitbang implementation
+ */
+
+struct fpga_mii {
+ unsigned fpga;
+ int mdio;
+} fpga_mii[] = {
+ { 0, 1},
+ { 1, 1},
+ { 2, 1},
+ { 3, 1},
+};
+
+static int mii_dummy_init(struct bb_miiphy_bus *bus)
+{
+ return 0;
+}
+
+static int mii_mdio_active(struct bb_miiphy_bus *bus)
+{
+ struct fpga_mii *fpga_mii = bus->priv;
+
+ if (fpga_mii->mdio)
+ FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
+ else
+ FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
+
+ return 0;
+}
+
+static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
+{
+ struct fpga_mii *fpga_mii = bus->priv;
+
+ FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
+
+ return 0;
+}
+
+static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
+{
+ struct fpga_mii *fpga_mii = bus->priv;
+
+ if (v)
+ FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
+ else
+ FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
+
+ fpga_mii->mdio = v;
+
+ return 0;
+}
+
+static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
+{
+ u16 gpio;
+ struct fpga_mii *fpga_mii = bus->priv;
+
+ FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);
+
+ *v = ((gpio & GPIO_MDIO) != 0);
+
+ return 0;
+}
+
+static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
+{
+ struct fpga_mii *fpga_mii = bus->priv;
+
+ if (v)
+ FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
+ else
+ FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);
+
+ return 0;
+}
+
+static int mii_delay(struct bb_miiphy_bus *bus)
+{
+ udelay(1);
+
+ return 0;
+}
+
+struct bb_miiphy_bus bb_miiphy_buses[] = {
+ {
+ .name = "board0",
+ .init = mii_dummy_init,
+ .mdio_active = mii_mdio_active,
+ .mdio_tristate = mii_mdio_tristate,
+ .set_mdio = mii_set_mdio,
+ .get_mdio = mii_get_mdio,
+ .set_mdc = mii_set_mdc,
+ .delay = mii_delay,
+ .priv = &fpga_mii[0],
+ },
+ {
+ .name = "board1",
+ .init = mii_dummy_init,
+ .mdio_active = mii_mdio_active,
+ .mdio_tristate = mii_mdio_tristate,
+ .set_mdio = mii_set_mdio,
+ .get_mdio = mii_get_mdio,
+ .set_mdc = mii_set_mdc,
+ .delay = mii_delay,
+ .priv = &fpga_mii[1],
+ },
+ {
+ .name = "board2",
+ .init = mii_dummy_init,
+ .mdio_active = mii_mdio_active,
+ .mdio_tristate = mii_mdio_tristate,
+ .set_mdio = mii_set_mdio,
+ .get_mdio = mii_get_mdio,
+ .set_mdc = mii_set_mdc,
+ .delay = mii_delay,
+ .priv = &fpga_mii[2],
+ },
+ {
+ .name = "board3",
+ .init = mii_dummy_init,
+ .mdio_active = mii_mdio_active,
+ .mdio_tristate = mii_mdio_tristate,
+ .set_mdio = mii_set_mdio,
+ .get_mdio = mii_get_mdio,
+ .set_mdc = mii_set_mdc,
+ .delay = mii_delay,
+ .priv = &fpga_mii[3],
+ },
+};
+
+int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
+ sizeof(bb_miiphy_buses[0]);
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+#include <asm/global_data.h>
+
+#include "mpc8308.h"
+#include <gdsys_fpga.h>
+
+#define REFLECTION_TESTPATTERN 0xdede
+#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
+
+#ifdef CONFIG_SYS_FPGA_NO_RFL_HI
+#define REFLECTION_TESTREG reflection_low
+#else
+#define REFLECTION_TESTREG reflection_high
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int get_fpga_state(unsigned dev)
+{
+ return gd->arch.fpga_state[dev];
+}
+
+void print_fpga_state(unsigned dev)
+{
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_DONE_FAILED)
+ puts(" Waiting for FPGA-DONE timed out.\n");
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
+ puts(" FPGA reflection test failed.\n");
+}
+
+int board_early_init_f(void)
+{
+ unsigned k;
+
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
+ gd->arch.fpga_state[k] = 0;
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ unsigned k;
+ unsigned ctr;
+
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
+ gd->arch.fpga_state[k] = 0;
+
+ /*
+ * reset FPGA
+ */
+ mpc8308_init();
+
+ mpc8308_set_fpga_reset(1);
+
+ mpc8308_setup_hw();
+
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
+ ctr = 0;
+ while (!mpc8308_get_fpga_done(k)) {
+ udelay(100000);
+ if (ctr++ > 5) {
+ gd->arch.fpga_state[k] |=
+ FPGA_STATE_DONE_FAILED;
+ break;
+ }
+ }
+ }
+
+ udelay(10);
+
+ mpc8308_set_fpga_reset(0);
+
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
+ /*
+ * wait for fpga out of reset
+ */
+ ctr = 0;
+ while (1) {
+ u16 val;
+
+ FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN);
+
+ FPGA_GET_REG(k, REFLECTION_TESTREG, &val);
+ if (val == REFLECTION_TESTPATTERN_INV)
+ break;
+
+ udelay(100000);
+ if (ctr++ > 5) {
+ gd->arch.fpga_state[k] |=
+ FPGA_STATE_REFLECTION_FAILED;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+#ifndef __MPC8308_H_
+#define __MPC8308_H_
+
+/* functions to be provided by board implementation */
+void mpc8308_init(void);
+void mpc8308_set_fpga_reset(unsigned state);
+void mpc8308_setup_hw(void);
+int mpc8308_get_fpga_done(unsigned fpga);
+
+#endif /* __MPC8308_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * Authors: Nick.Spence@freescale.com
+ * Wilson.Lo@freescale.com
+ * scottwood@freescale.com
+ *
+ * This files is mostly identical to the original from
+ * board\freescale\mpc8315erdb\sdram.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <spd_sdram.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Fixed sdram init -- doesn't use serial presence detect.
+ *
+ * This is useful for faster booting in configs where the RAM is unlikely
+ * to be changed, or for things like NAND booting where space is tight.
+ */
+static long fixed_sdram(void)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ out_be32(&im->sysconf.ddrlaw[0].bar,
+ CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000);
+ out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
+ out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
+
+ out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
+ out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
+
+ /* Currently we use only one CS, so disable the other bank. */
+ out_be32(&im->ddr.cs_config[1], 0);
+
+ out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
+ out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+ out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+ out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+ out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+
+ out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
+ out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
+ out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
+ out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
+
+ out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
+ sync();
+
+ /* enable DDR controller */
+ setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
+ sync();
+
+ return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
+}
+
+phys_size_t initdram(int board_type)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize;
+
+ if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ /* DDR SDRAM */
+ msize = fixed_sdram();
+
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize;
+}
tmp_buf);
if (!n)
goto failure;
- result = min(size, blk_len - ofs);
+ result = min(size, (int)(blk_len - ofs));
memcpy(dst, tmp_buf + ofs, result);
dst += result;
size -= result;
src_buf = buf;
for (ptr = (uint8_t *)src_buf, i = 20; i > 0;
i -= data_size, ptr += data_size)
- memcpy(ptr, data, min(i, data_size));
+ memcpy(ptr, data,
+ min_t(size_t, i, data_size));
}
}
bin_func(dst_reg->digest, src_buf, 20);
struct key_program header;
uint32_t crc;
uint8_t buf[12];
- int i;
+ loff_t i;
if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
goto failure;
- i = fs_read(path, (ulong)buf, 0, 12);
+ if (fs_read(path, (ulong)buf, 0, 12, &i) < 0)
+ goto failure;
if (i < 12)
goto failure;
header.magic = get_unaligned_be32(buf);
goto failure;
if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
goto failure;
- i = fs_read(path, (ulong)result, 0,
- sizeof(struct key_program) + header.code_size);
+ if (fs_read(path, (ulong)result, 0,
+ sizeof(struct key_program) + header.code_size, &i) < 0)
+ goto failure;
if (i <= 0)
goto failure;
*result = header;
const char *image_path = "/ccdm.itb";
char *mac_path = NULL;
ulong image_addr;
- size_t image_size;
+ loff_t image_size;
uint32_t err;
printf("CCDM S2\n");
image_addr = (ulong)get_image_location();
if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT))
goto failure;
- image_size = fs_read(image_path, image_addr, 0, 0);
+ if (fs_read(image_path, image_addr, 0, 0, &image_size) < 0)
+ goto failure;
if (image_size <= 0)
goto failure;
- printf("CCDM image found on %s, %d bytes\n", mmcdev, image_size);
+ printf("CCDM image found on %s, %lld bytes\n", mmcdev, image_size);
hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path);
if (!hmac_blob) {
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
--- /dev/null
+if TARGET_CHROMEBOOK_LINK
+
+config SYS_BOARD
+ default "chromebook_link"
+
+config SYS_VENDOR
+ default "google"
+
+config SYS_SOC
+ default "ivybridge"
+
+config SYS_CONFIG_NAME
+ default "chromebook_link"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_INTEL_SOCKET_RPGA989
+ select NORTHBRIDGE_INTEL_IVYBRIDGE
+ select SOUTHBRIDGE_INTEL_C216
+ select HAVE_ACPI_RESUME
+ select MARK_GRAPHICS_MEM_WRCOMB
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+
+config EARLY_POST_CROS_EC
+ bool "Enable early post to Chrome OS EC"
+ default y
+
+endif
--- /dev/null
+CHROMEBOOK LINK BOARD
+M: Simon Glass <sjg@chromium.org>
+S: Maintained
+F: board/google/chromebook_link/
+F: include/configs/chromebook_link.h
+F: configs/chromebook_link_defconfig
--- /dev/null
+#
+# Copyright (c) 2011 The Chromium OS Authors.
+# (C) Copyright 2008
+# Graeme Russ, graeme.russ@gmail.com.
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += link.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+
+int arch_early_init_r(void)
+{
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ return 0;
+}
+
+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
+ .gpio0 = GPIO_MODE_GPIO, /* NMI_DBG# */
+ .gpio3 = GPIO_MODE_GPIO, /* ALS_INT# */
+ .gpio5 = GPIO_MODE_GPIO, /* SIM_DET */
+ .gpio7 = GPIO_MODE_GPIO, /* EC_SCI# */
+ .gpio8 = GPIO_MODE_GPIO, /* EC_SMI# */
+ .gpio9 = GPIO_MODE_GPIO, /* RECOVERY# */
+ .gpio10 = GPIO_MODE_GPIO, /* SPD vector D3 */
+ .gpio11 = GPIO_MODE_GPIO, /* smbalert#, let's keep it initialized */
+ .gpio12 = GPIO_MODE_GPIO, /* TP_INT# */
+ .gpio14 = GPIO_MODE_GPIO, /* Touch_INT_L */
+ .gpio15 = GPIO_MODE_GPIO, /* EC_LID_OUT# (EC_WAKE#) */
+ .gpio21 = GPIO_MODE_GPIO, /* EC_IN_RW */
+ .gpio24 = GPIO_MODE_GPIO, /* DDR3L_EN */
+ .gpio28 = GPIO_MODE_GPIO, /* SLP_ME_CSW_DEV# */
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
+ .gpio0 = GPIO_DIR_INPUT,
+ .gpio3 = GPIO_DIR_INPUT,
+ .gpio5 = GPIO_DIR_INPUT,
+ .gpio7 = GPIO_DIR_INPUT,
+ .gpio8 = GPIO_DIR_INPUT,
+ .gpio9 = GPIO_DIR_INPUT,
+ .gpio10 = GPIO_DIR_INPUT,
+ .gpio11 = GPIO_DIR_INPUT,
+ .gpio12 = GPIO_DIR_INPUT,
+ .gpio14 = GPIO_DIR_INPUT,
+ .gpio15 = GPIO_DIR_INPUT,
+ .gpio21 = GPIO_DIR_INPUT,
+ .gpio24 = GPIO_DIR_OUTPUT,
+ .gpio28 = GPIO_DIR_INPUT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_level = {
+ .gpio1 = GPIO_LEVEL_HIGH,
+ .gpio6 = GPIO_LEVEL_HIGH,
+ .gpio24 = GPIO_LEVEL_LOW,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
+ .gpio7 = GPIO_INVERT,
+ .gpio8 = GPIO_INVERT,
+ .gpio12 = GPIO_INVERT,
+ .gpio14 = GPIO_INVERT,
+ .gpio15 = GPIO_INVERT,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
+ .gpio36 = GPIO_MODE_GPIO, /* W_DISABLE_L */
+ .gpio41 = GPIO_MODE_GPIO, /* SPD vector D0 */
+ .gpio42 = GPIO_MODE_GPIO, /* SPD vector D1 */
+ .gpio43 = GPIO_MODE_GPIO, /* SPD vector D2 */
+ .gpio57 = GPIO_MODE_GPIO, /* PCH_SPI_WP_D */
+ .gpio60 = GPIO_MODE_GPIO, /* DRAMRST_CNTRL_PCH */
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
+ .gpio36 = GPIO_DIR_OUTPUT,
+ .gpio41 = GPIO_DIR_INPUT,
+ .gpio42 = GPIO_DIR_INPUT,
+ .gpio43 = GPIO_DIR_INPUT,
+ .gpio57 = GPIO_DIR_INPUT,
+ .gpio60 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_level = {
+ .gpio36 = GPIO_LEVEL_HIGH,
+ .gpio60 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_level = {
+};
+
+static const struct pch_gpio_map link_gpio_map = {
+ .set1 = {
+ .mode = &pch_gpio_set1_mode,
+ .direction = &pch_gpio_set1_direction,
+ .level = &pch_gpio_set1_level,
+ .invert = &pch_gpio_set1_invert,
+ },
+ .set2 = {
+ .mode = &pch_gpio_set2_mode,
+ .direction = &pch_gpio_set2_direction,
+ .level = &pch_gpio_set2_level,
+ },
+ .set3 = {
+ .mode = &pch_gpio_set3_mode,
+ .direction = &pch_gpio_set3_direction,
+ .level = &pch_gpio_set3_level,
+ },
+};
+
+int board_early_init_f(void)
+{
+ ich_gpio_set_gpio_map(&link_gpio_map);
+
+ return 0;
+}
--- /dev/null
+#
+# Copyright (c) 2014 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += early_init.o
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+ /* Enable post codes to EC */
+#ifdef CONFIG_EARLY_POST_CROS_EC
+ mov $0x1b, %ecx
+ rdmsr
+ and $0x100, %eax
+ test %eax, %eax
+ je 1f
+
+ mov $0x8000f8f0, %eax
+ mov $0xcf8, %dx
+ out %eax, (%dx)
+ mov $0xfed1c001, %eax
+ mov $0xcfc, %dx
+ out %eax, (%dx)
+ mov $0xfed1f410, %esp
+ mov (%esp), %eax
+ and $0xfffffffb, %eax
+ mov %eax, (%esp)
+1:
+#endif
+ jmp early_board_init_ret
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *fdt, bd_t *bd)
+int ft_board_setup(void *fdt, bd_t *bd)
{
static const char disabled[] = "disabled";
u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
if (!(reg & PWRDOM_STAT_EMMC))
do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status",
disabled, sizeof(disabled), 1);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int phy_addr = CONFIG_PHY_ADDR;
char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
#endif
/* fix up the phy address */
do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
void *reg = (void *)CKSEG1ADDR(MALTA_ASCIIPOS0);
/* print up to 8 characters of the string */
- for (i = 0; i < min(strlen(str), 8); i++) {
+ for (i = 0; i < min((int)strlen(str), 8); i++) {
__raw_writel(str[i], reg);
reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
}
}
#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int phy_addr = CONFIG_PHY_ADDR;
char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
#endif
/* fix up the phy address */
do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_fman_mac_addresses(blob);
#endif
+
+ return 0;
}
#if defined(CONFIG_POST)
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[4];
int rc;
if (rc)
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
+#include <asm/arch/crm_regs.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
.trasmin = 3590,
};
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF00000, &ccm->CCGR3);
+ writel(0xFFFFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
/*
* called from C runtime startup code (arch/arm/lib/crt0.S:_main)
* - we have a stack and a place to store GD, both in SRAM
/* setup AIPS and disable watchdog */
arch_cpu_init();
+ ccgr_init();
+ gpr_init();
+
/* setup GP timer */
timer_init();
+++ /dev/null
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer docs/README.imxmage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/* Boot Device : sd */
-BOOT_FROM sd
-
-#define __ASSEMBLY__
-#include <config.h>
-#include "asm/arch/iomux.h"
-#include "asm/arch/crm_regs.h"
-
-/* set the default clock gate to save power */
-DATA 4, CCM_CCGR0, 0x00C03F3F
-DATA 4, CCM_CCGR1, 0x0030FC03
-DATA 4, CCM_CCGR2, 0x0FFFC000
-DATA 4, CCM_CCGR3, 0x3FF00000
-DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */
-DATA 4, CCM_CCGR5, 0x0F0000C3
-DATA 4, CCM_CCGR6, 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
-DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en = 1 --> CKO1 enabled
- * cko1_div = 111 --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4, CCM_CCOSR, 0x000000fb
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
if TARGET_MPR2
-config SYS_CPU
- default "sh3"
-
config SYS_BOARD
default "mpr2"
if TARGET_MS7720SE
-config SYS_CPU
- default "sh3"
-
config SYS_BOARD
default "ms7720se"
if TARGET_MS7722SE
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "ms7722se"
if TARGET_MS7750SE
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "ms7750se"
}
}
-void ft_board_setup (void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
*/
#include <common.h>
+#include <dm.h>
#include <ns16550.h>
#include <linux/compiler.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_SPL_BUILD
+/* TODO(sjg@chromium.org): Remove once SPL supports device tree */
+U_BOOT_DEVICE(tegra_gpios) = {
+ "gpio_tegra"
+};
+#endif
+
const struct tegra_sysinfo sysinfo = {
CONFIG_TEGRA_BOARD_STRING
};
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[8];
int rc, i = 0;
if (rc)
printf("Unable to update flash reg property, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
msg_clk->get_clock_rate.body.resp.rate_hz);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
/*
* For now, we simply always add the simplefb DT node. Later, we
* node exists for the "real" graphics driver.
*/
lcd_dt_simplefb_add_node(blob);
+
+ return 0;
}
if TARGET_MIGOR
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "MigoR"
#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
+#define MSTPSR3 0xE6150048
+#define SMSTPCR3 0xE615013C
+#define IIC1_MSTP323 (1 << 23)
+
#define mstp_setbits(type, addr, saddr, set) \
out_##type((saddr), in_##type(addr) | (set))
#define mstp_clrbits(type, addr, saddr, clear) \
/* ETHER */
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+ /* IIC1 / sh-i2c ch1 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
- gd->bd->bi_boot_params = ALT_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7794_pinmux_init();
CONFIG_RMOBILE_BOARD_STRING
};
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = ALT_SDRAM_BASE;
- gd->bd->bi_dram[0].size = ALT_SDRAM_SIZE;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
void reset_cpu(ulong addr)
{
u8 val;
- i2c_set_bus_num(1); /* PowerIC connected to ch3 */
- i2c_init(400000, 0);
+ i2c_set_bus_num(1); /* PowerIC connected to ch1 */
i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
if TARGET_AP325RXA
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "ap325rxa"
if TARGET_ECOVEC
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "ecovec"
int board_late_init(void)
{
u8 mac[6];
- char env_mac[17];
+ char env_mac[18];
udelay(1000);
--- /dev/null
+if TARGET_GOSE
+
+config SYS_BOARD
+ default "gose"
+
+config SYS_VENDOR
+ default "renesas"
+
+config SYS_CONFIG_NAME
+ default "gose"
+
+endif
--- /dev/null
+ALT BOARD
+M: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+S: Maintained
+F: board/renesas/gose/
+F: include/configs/gose.h
+F: configs/gose_defconfig
--- /dev/null
+#
+# board/renesas/alt/Makefile
+#
+# Copyright (C) 2014 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := gose.o qos.o
--- /dev/null
+/*
+ * board/renesas/gose/gose.c
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <i2c.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
+void s_init(void)
+{
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+ u32 stc;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ /* CPU frequency setting. Set to 1.5GHz */
+ stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT;
+ clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc);
+
+ /* QoS */
+ qos_init();
+}
+
+#define MSTPSR1 0xE6150038
+#define SMSTPCR1 0xE6150134
+#define TMU0_MSTP125 (1 << 25)
+
+#define MSTPSR7 0xE61501C4
+#define SMSTPCR7 0xE615014C
+#define SCIF0_MSTP721 (1 << 21)
+
+#define MSTPSR8 0xE61509A0
+#define SMSTPCR8 0xE6150990
+#define ETHER_MSTP813 (1 << 13)
+
+#define mstp_setbits(type, addr, saddr, set) \
+ out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+ out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+ mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear) \
+ mstp_clrbits(le32, addr, saddr, clear)
+
+int board_early_init_f(void)
+{
+ /* TMU0 */
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+ /* SCIF0 */
+ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+ /* ETHER */
+ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+
+ return 0;
+}
+
+#define TSTR0 0x04
+#define TSTR0_STR0 0x01
+void arch_preboot_os(void)
+{
+ /* stop TMU0 */
+ mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
+ /* Disable TMU0 */
+ mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+}
+
+#define PUPR5 0xE6060114
+#define PUPR5_ETH 0x3FFC0000
+#define PUPR5_ETH_MAGIC (1 << 27)
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7793_pinmux_init();
+
+ /* ETHER Enable */
+ gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
+ gpio_request(GPIO_FN_ETH_RX_ER, NULL);
+ gpio_request(GPIO_FN_ETH_RXD0, NULL);
+ gpio_request(GPIO_FN_ETH_RXD1, NULL);
+ gpio_request(GPIO_FN_ETH_LINK, NULL);
+ gpio_request(GPIO_FN_ETH_REFCLK, NULL);
+ gpio_request(GPIO_FN_ETH_MDIO, NULL);
+ gpio_request(GPIO_FN_ETH_TXD1, NULL);
+ gpio_request(GPIO_FN_ETH_TX_EN, NULL);
+ gpio_request(GPIO_FN_ETH_TXD0, NULL);
+ gpio_request(GPIO_FN_ETH_MDC, NULL);
+ gpio_request(GPIO_FN_IRQ0, NULL);
+
+ mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC);
+ gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */
+ mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC);
+
+ gpio_direction_output(GPIO_GP_5_22, 0);
+ mdelay(20);
+ gpio_set_value(GPIO_GP_5_22, 1);
+ udelay(1);
+
+ return 0;
+}
+
+#define CXR24 0xEE7003C0 /* MAC address high register */
+#define CXR25 0xEE7003C8 /* MAC address low register */
+
+int board_eth_init(bd_t *bis)
+{
+ int ret = -ENODEV;
+ u32 val;
+ unsigned char enetaddr[6];
+
+#ifdef CONFIG_SH_ETHER
+ ret = sh_eth_initialize(bis);
+ if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+ return ret;
+
+ /* Set Mac address */
+ val = enetaddr[0] << 24 | enetaddr[1] << 16 |
+ enetaddr[2] << 8 | enetaddr[3];
+ writel(val, CXR24);
+
+ val = enetaddr[4] << 8 | enetaddr[5];
+ writel(val, CXR25);
+#endif
+
+ return ret;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+void reset_cpu(ulong addr)
+{
+ u8 val;
+
+ i2c_set_bus_num(2); /* PowerIC connected to ch2 */
+ i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+ val |= 0x02;
+ i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+}
--- /dev/null
+/*
+ * board/renesas/gose/qos.c
+ * This file is gose QoS setting.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+/* QoS version 0.20 */
+enum {
+ DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+ DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+ DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+ DBSC3_15,
+ DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+ int i;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct rcar_s3c *)S3C_BASE;
+ writel(0x00000000, &s3c->s3cadsplcr);
+ writel(0x1F0B0908, &s3c->s3crorr);
+ writel(0x1F0C0A08, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20DC, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20DC, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20FA, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20FA, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00001FB0, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x0000201E, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002050, &qos_addr->dbtmval2);
+ writel(0x0000203A, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x0000203C, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* CCI-400 -QoS */
+ writel(0x20001000, CCI_400_MAXOT_1);
+ writel(0x20001000, CCI_400_MAXOT_2);
+ writel(0x0000000C, CCI_400_QOSCNTL_1);
+ writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct rcar_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00200000, &mxi->mxs3cracr);
+ writel(0x00200000, &mxi->mxs3cwacr);
+ writel(0x00200000, &mxi->mxaxiracr);
+ writel(0x00200000, &mxi->mxaxiwacr);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000C, &mxi_qos->vspdu1);
+ writel(0x0000000E, &mxi_qos->du0);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002299, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000206E, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+}
+#else /* CONFIG_RMOBILE_EXTRAM_BOOT */
+void qos_init(void)
+{
+}
+#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */
--- /dev/null
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
int board_init(void)
{
/* adress of boot parameters */
- gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7791_pinmux_init();
CONFIG_RMOBILE_BOARD_STRING
};
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE;
- gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
void reset_cpu(ulong addr)
{
u8 val;
int board_init(void)
{
/* adress of boot parameters */
- gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7790_pinmux_init();
CONFIG_RMOBILE_BOARD_STRING
};
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = LAGER_SDRAM_BASE;
- gd->bd->bi_dram[0].size = LAGER_SDRAM_SIZE;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
void reset_cpu(ulong addr)
{
u8 val;
if TARGET_R0P7734
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "r0p7734"
if TARGET_R2DPLUS
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "r2dplus"
if TARGET_R7780MP
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "r7780mp"
if TARGET_RSK7203
-config SYS_CPU
- default "sh2"
-
config SYS_BOARD
default "rsk7203"
if TARGET_RSK7264
-config SYS_CPU
- default "sh2"
-
config SYS_BOARD
default "rsk7264"
if TARGET_RSK7269
-config SYS_CPU
- default "sh2"
-
config SYS_BOARD
default "rsk7269"
if TARGET_SH7752EVB
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "sh7752evb"
if TARGET_SH7753EVB
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "sh7753evb"
if TARGET_SH7757LCR
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "sh7757lcr"
if TARGET_SH7763RDP
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "sh7763rdp"
if TARGET_SH7785LCR
-config SYS_CPU
- default "sh4"
-
config SYS_BOARD
default "sh7785lcr"
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_PCI_INIT
FT_FSL_PCI_SETUP;
#endif
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
if TARGET_SHMIN
-config SYS_CPU
- default "sh3"
-
config SYS_BOARD
default "shmin"
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_CMD_NAND
static void corvus_nand_hw_init(void)
{
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
unsigned long csa;
/* Enable CS3 */
AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
- writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
/* Enable NandFlash */
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
+
+#if defined(CONFIG_SPL_BUILD)
+#include <spl.h>
+#include <nand.h>
+
+void at91_spl_board_init(void)
+{
+ /*
+ * For on the sam9m10g45ek board, the chip wm9711 stay in the test
+ * mode, so it need do some action to exit mode.
+ */
+ at91_set_gpio_output(AT91_PIN_PD7, 0);
+ at91_set_gpio_output(AT91_PIN_PD8, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTD, 7, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTD, 8, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+
+ corvus_nand_hw_init();
+
+ /* Configure recovery button PINs */
+ at91_set_gpio_input(AT91_PIN_PB7, 1);
+
+ /* check if button is pressed */
+ if (at91_get_gpio_value(AT91_PIN_PB7) == 0) {
+ u32 boot_device;
+
+ debug("Recovery button pressed\n");
+ boot_device = spl_boot_device();
+ switch (boot_device) {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ case BOOT_DEVICE_NAND:
+ nand_init();
+ spl_nand_erase_one(0, 0);
+ break;
#endif
+ }
+ }
+}
-#ifdef CONFIG_CMD_USB
-static void taurus_usb_hw_init(void)
+#include <asm/arch/atmel_mpddrc.h>
+static void ddr2_conf(struct atmel_mpddr *ddr2)
+{
+ ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+ ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+ ATMEL_MPDDRC_CR_NR_ROW_14 |
+ ATMEL_MPDDRC_CR_DIC_DS |
+ ATMEL_MPDDRC_CR_DQMS_SHARED |
+ ATMEL_MPDDRC_CR_CAS_DDR_CAS3);
+ ddr2->rtr = 0x24b;
+
+ ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |/* 6*7.5 = 45 ns */
+ 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |/* 2*7.5 = 15 ns */
+ 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | /* 2*7.5 = 15 ns */
+ 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | /* 8*7.5 = 75 ns */
+ 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | /* 2*7.5 = 15 ns */
+ 1 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | /* 1*7.5= 7.5 ns*/
+ 1 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | /* 1 clk cycle */
+ 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); /* 2 clk cycles */
+
+ ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | /* 2*7.5 = 15 ns */
+ 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+ 16 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+ 14 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+ ddr2->tpr2 = (1 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+ 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+ 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct atmel_mpddr ddr2;
+ unsigned long csa;
+
+ ddr2_conf(&ddr2);
- writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
+ /* enable DDR2 clock */
+ writel(0x4, &pmc->scer);
+
+ /* Chip select 1 is for DDR2/SDRAM */
+ csa = readl(&mat->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS1A_SDRAMC;
+ csa &= ~AT91_MATRIX_EBI_VDDIOMSEL_3_3V;
+ writel(csa, &mat->ebicsa);
+
+ /* DDRAM2 Controller initialize */
+ ddr2_init(ATMEL_BASE_CS6, &ddr2);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void taurus_usb_hw_init(void)
+{
+ at91_periph_clk_enable(ATMEL_ID_PIODE);
at91_set_gpio_output(AT91_PIN_PD1, 0);
at91_set_gpio_output(AT91_PIN_PD3, 0);
#ifdef CONFIG_MACB
static void corvus_macb_hw_init(void)
{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
/* Enable clock */
- writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_EMAC);
/*
* Disable pull-up on:
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/clk.h>
+#include <linux/mtd/nand.h>
#include <atmel_mci.h>
+#include <asm/arch/at91_spi.h>
+#include <spi.h>
#include <net.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_CMD_NAND
static void taurus_nand_hw_init(void)
{
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
/* Enable NandFlash */
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
+
+#if defined(CONFIG_SPL_BUILD)
+#include <spl.h>
+#include <nand.h>
+
+void matrix_init(void)
+{
+ struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+
+ writel((readl(&mat->scfg[3]) & (~AT91_MATRIX_SLOT_CYCLE))
+ | AT91_MATRIX_SLOT_CYCLE_(0x40),
+ &mat->scfg[3]);
+}
+
+void at91_spl_board_init(void)
+{
+ taurus_nand_hw_init();
+
+ /* Configure recovery button PINs */
+ at91_set_gpio_input(AT91_PIN_PA31, 1);
+
+ /* check if button is pressed */
+ if (at91_get_gpio_value(AT91_PIN_PA31) == 0) {
+ u32 boot_device;
+
+ debug("Recovery button pressed\n");
+ boot_device = spl_boot_device();
+ switch (boot_device) {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ case BOOT_DEVICE_NAND:
+ nand_init();
+ spl_nand_erase_one(0, 0);
+ break;
+#endif
+ }
+ }
+}
+
+void mem_init(void)
+{
+ struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct sdramc_reg setting;
+
+ at91_sdram_hw_init();
+ setting.cr = (AT91_SDRAMC_NC_9 |
+ AT91_SDRAMC_NR_13 |
+ AT91_SDRAMC_CAS_3 |
+ AT91_SDRAMC_NB_4 |
+ AT91_SDRAMC_DBW_32 |
+ AT91_SDRAMC_TWR_VAL(3) |
+ AT91_SDRAMC_TRC_VAL(9) |
+ AT91_SDRAMC_TRP_VAL(3) |
+ AT91_SDRAMC_TRCD_VAL(3) |
+ AT91_SDRAMC_TRAS_VAL(6) |
+ AT91_SDRAMC_TXSR_VAL(10));
+ setting.mdr = AT91_SDRAMC_MD_SDRAM;
+ setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000;
+
+
+ writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC |
+ AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL,
+ &ma->ebicsa);
+ sdramc_initialize(ATMEL_BASE_CS1, &setting);
+}
#endif
#ifdef CONFIG_MACB
static void taurus_macb_hw_init(void)
{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
/* Enable EMAC clock */
- writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_EMAC0);
/*
* Disable pull-up on:
int board_early_init_f(void)
{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
/* Enable clocks for all PIOs */
- writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
- (1 << ATMEL_ID_PIOC),
- &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+
+ at91_seriald_hw_init();
return 0;
}
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ at91_set_gpio_value(TAURUS_SPI_CS_PIN, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ at91_set_gpio_value(TAURUS_SPI_CS_PIN, 1);
+}
+
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
taurus_nand_hw_init();
#endif
#ifdef CONFIG_MACB
taurus_macb_hw_init();
#endif
+ at91_spi0_hw_init(TAURUS_SPI_MASK);
return 0;
}
#endif /* CONFIG_BOARD_EARLY_INIT_R */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[12];
int rc, i = 0;
if (rc)
printf("Unable to update localbus ranges, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
config MACH_SUN7I
bool "sun7i (Allwinner A20)"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
+ select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN8I
bool "sun8i (Allwinner A23)"
---help---
See USB1_VBUS_PIN help text.
+config VIDEO
+ boolean "Enable graphical uboot console on HDMI"
+ default y
+ ---help---
+ Say Y here to add support for using a cfb console on the HDMI output
+ found on most sunxi devices.
+
+config USB_KEYBOARD
+ boolean "Enable USB keyboard support"
+ default y
+ ---help---
+ Say Y here to add support for using a USB keyboard (typically used
+ in combination with a graphical console on HDMI).
+
endif
#ifdef CONFIG_SATAPWR
gpio_request(CONFIG_SATAPWR, "satapwr");
gpio_direction_output(CONFIG_SATAPWR, 1);
+ /* Give attached sata device time to power-up to avoid link timeouts */
+ mdelay(500);
#endif
if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
#endif
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/display.h>
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
return 0;
}
#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+ return sunxi_simplefb_setup(blob);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Set up clock gating */
+#ifndef CONFIG_MACH_SUN6I
setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
+#else
+ setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_RESET_OFFSET_GMAC);
+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_GMAC);
+#endif
/* Set MII clock */
#ifdef CONFIG_RGMII
setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
#endif
+#ifndef CONFIG_MACH_SUN6I
/* Configure pin mux settings for GMAC */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
#ifdef CONFIG_RGMII
sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC);
sunxi_gpio_set_drv(pin, 3);
}
+#elif defined CONFIG_RGMII
+ /* Configure sun6i RGMII mode pin mux settings */
+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ sunxi_gpio_set_drv(pin, 3);
+ }
+ for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ sunxi_gpio_set_drv(pin, 3);
+ }
+ for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ sunxi_gpio_set_drv(pin, 3);
+ }
+ for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ sunxi_gpio_set_drv(pin, 3);
+ }
+#elif defined CONFIG_GMII
+ /* Configure sun6i GMII mode pin mux settings */
+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+#else
+ /* Configure sun6i MII mode pin mux settings */
+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+ for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC);
+#endif
#ifdef CONFIG_RGMII
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
+#elif defined CONFIG_GMII
+ return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
#else
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
#endif
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
- int i;
-
/*
* (U-boot device node) (Physical Port)
* mmc0 SD2
* mmc1 SD3
* mmc2 eMMC
*/
+ int i, ret;
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
-
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
#endif /* CONFIG_FSL_ESDHC */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int lpae;
char *env;
}
}
}
+
+ return 0;
}
void ft_board_setup_ex(void *blob, bd_t *bd)
#endif /* CONFIG_VIDEO_SM501 */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#if defined(CONFIG_VIDEO)
fdt_add_edid(blob, "smi,sm501", edid_buf);
#endif
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif /* CONFIG_PCI */
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/spi.h>
#include <common.h>
#include <fsl_esdhc.h>
#include <libfdt.h>
int dram_init(void)
{
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+ gd->ram_size = imx_ddr_size();
return 0;
}
static void tqma6_setup_i2c(void)
{
- /* use logical index for bus, e.g. I2C1 -> 0 */
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
+ int ret;
+ /*
+ * use logical index for bus, e.g. I2C1 -> 0
+ * warn on error
+ */
+ ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
+ if (ret)
+ printf("setup I2C3 failed: %d\n", ret);
}
int board_early_init_f(void)
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
/* bring in eMMC dsr settings */
do_fixup_by_path_u32(blob,
"/soc/aips-bus@02100000/usdhc@02198000",
"dsr", tqma6_emmc_dsr, 2);
tqma6_bb_ft_board_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
static void mba6_setup_i2c(void)
{
- /* use logical index for bus, e.g. I2C1 -> 0 */
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mba6_i2c1_pads);
+ int ret;
+ /*
+ * use logical index for bus, e.g. I2C1 -> 0
+ * warn on error
+ */
+ ret = setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mba6_i2c1_pads);
+ if (ret)
+ printf("setup I2C1 failed: %d\n", ret);
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+ int ret;
u32 index = 0;
/*
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
}
static int mx6_rgmii_rework(struct phy_device *phydev)
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
menu "Command line interface"
depends on !SPL_BUILD
+config HUSH_PARSER
+ bool "Use hush shell"
+ select SYS_HUSH_PARSER
+ help
+ This option enables the "hush" shell (from Busybox) as command line
+ interpreter, thus enabling powerful command line syntax like
+ if...then...else...fi conditionals or `&&' and '||'
+ constructs ("shell scripts").
+
+ If disabled, you get the old, much simpler behaviour with a somewhat
+ smaller memory footprint.
+
+config SYS_HUSH_PARSER
+ bool
+ help
+ Backward compatibility.
+
+comment "Commands"
+
+menu "Info commands"
+
+config CMD_BDI
+ bool "bdinfo"
+ help
+ Print board info
+
+config CMD_CONSOLE
+ bool "coninfo"
+ help
+ Print console devices and information.
+
+config CMD_LICENSE
+ bool "license"
+ help
+ Print GPL license text
+
+endmenu
+
+menu "Boot commands"
+
+config CMD_BOOTD
+ bool "bootd"
+ help
+ Run the command stored in the environment "bootcmd", i.e.
+ "bootd" does the same thing as "run bootcmd".
+
config CMD_BOOTM
- bool "Enable bootm command"
+ bool "bootm"
default y
help
Boot an application image from the memory.
-config CMD_CRC32
- bool "Enable crc32 command"
+config CMD_GO
+ bool "go"
default y
help
- Compute CRC32.
+ Start an application at a given address.
+
+config CMD_RUN
+ bool "run"
+ help
+ Run the command in the given environment variable.
+
+config CMD_IMI
+ bool "iminfo"
+ help
+ Print header information for application image.
+
+config CMD_IMLS
+ bool "imls"
+ help
+ List all images found in flash
+
+config CMD_XIMG
+ bool "imxtract"
+ help
+ Extract a part of a multi-image.
+
+endmenu
+
+menu "Environment commands"
config CMD_EXPORTENV
- bool "Enable env export command"
+ bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
- bool "Enable env import command"
+ bool "env import"
default y
help
Import environments.
-config CMD_GO
- bool "Enable go command"
+config CMD_EDITENV
+ bool "editenv"
+ help
+ Edit environment variable.
+
+config CMD_SAVEENV
+ bool "saveenv"
+ help
+ Run the command in the given environment variable.
+
+endmenu
+
+menu "Memory commands"
+
+config CMD_MEMORY
+ bool "md, mm, nm, mw, cp, cmp, base, loop"
+ help
+ Memeory commands.
+ md - memory display
+ mm - memory modify (auto-incrementing address)
+ nm - memory modify (constant address)
+ mw - memory write (fill)
+ cp - memory copy
+ cmp - memory compare
+ base - print or set address offset
+ loop - initinite loop on address range
+
+config CMD_CRC32
+ bool "crc32"
default y
help
- Start an application at a given address.
+ Compute CRC32.
+
+config LOOPW
+ bool "loopw"
+ help
+ Infinite write loop on address range
+
+config CMD_MEMTEST
+ bool "crc32"
+ help
+ Simple RAM read/write test.
+
+config CMD_MX_CYCLIC
+ bool "mdc, mwc"
+ help
+ mdc - memory display cyclic
+ mwc - memory write cyclic
+
+config CMD_MEMINFO
+ bool "meminfo"
+ help
+ Display memory information.
+
+endmenu
+
+menu "Device access commands"
+
+config CMD_LOADB
+ bool "loadb"
+ help
+ Load a binary file over serial line.
+
+config CMD_LOADS
+ bool "loads"
+ help
+ Load an S-Record file over serial line
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_NAND
+ bool "nand"
+ help
+ NAND support.
+
+config CMD_SPI
+ bool "sspi"
+ help
+ SPI utility command.
+
+config CMD_I2C
+ bool "i2c"
+ help
+ I2C support.
+
+config CMD_USB
+ bool "usb"
+ help
+ USB support.
+
+config CMD_FPGA
+ bool "fpga"
+ help
+ FPGA support.
+
+endmenu
+
+
+menu "Shell scripting commands"
+
+config CMD_ECHO
+ bool "echo"
+ help
+ Echo args to console
+
+config CMD_ITEST
+ bool "itest"
+ help
+ Return true/false on integer compare.
+
+config CMD_SOURCE
+ bool "source"
+ help
+ Run script from memory
+
+endmenu
+
+menu "Network commands"
+
+config CMD_NET
+ bool "bootp, tftpboot"
+ help
+ Network commands.
+ bootp - boot image via network using BOOTP/TFTP protocol
+ tftpboot - boot image via network using TFTP protocol
+
+config CMD_TFTPPUT
+ bool "tftp put"
+ help
+ TFTP put command, for uploading files to a server
+
+config CMD_TFTPSRV
+ bool "tftpsrv"
+ help
+ Act as a TFTP server and boot the first received file
+
+config CMD_RARP
+ bool "rarpboot"
+ help
+ Boot image via network using RARP/TFTP protocol
+
+config CMD_DHCP
+ bool "dhcp"
+ help
+ Boot image via network using DHCP/TFTP protocol
+
+config CMD_NFS
+ bool "nfs"
+ help
+ Boot image via network using NFS protocol.
+
+config CMD_PING
+ bool "ping"
+ help
+ Send ICMP ECHO_REQUEST to network host
+
+config CMD_CDP
+ bool "cdp"
+ help
+ Perform CDP network configuration
+
+config CMD_SNTP
+ bool "sntp"
+ help
+ Synchronize RTC via network
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_LINK_LOCAL
+ bool "linklocal"
+ help
+ Acquire a network IP address using the link-local protocol
+
+endmenu
+
+menu "Misc commands"
+
+config CMD_TIME
+ bool "time"
+ help
+ Run commands and summarize execution time.
+
+# TODO: rename to CMD_SLEEP
+config CMD_MISC
+ bool "sleep"
+ help
+ Delay execution for some time
+
+config CMD_TIMER
+ bool "timer"
+ help
+ Access the system timer.
+
+config CMD_SETGETDCR
+ bool "getdcr, setdcr, getidcr, setidcr"
+ depends on 4xx
+ help
+ getdcr - Get an AMCC PPC 4xx DCR's value
+ setdcr - Set an AMCC PPC 4xx DCR's value
+ getidcr - Get a register value via indirect DCR addressing
+ setidcr - Set a register value via indirect DCR addressing
+
+endmenu
endmenu
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o
+obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o
obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o
obj-y += console.o
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-y += dlmalloc.o
+ifdef CONFIG_SYS_MALLOC_F_LEN
+obj-y += malloc_simple.o
+endif
obj-y += image.o
obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
obj-$(CONFIG_OF_LIBFDT) += image-fdt.o
static int display_text_info(void)
{
#ifndef CONFIG_SANDBOX
- ulong bss_start, bss_end;
+ ulong bss_start, bss_end, text_base;
bss_start = (ulong)&__bss_start;
bss_end = (ulong)&__bss_end;
- debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n",
#ifdef CONFIG_SYS_TEXT_BASE
- CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
+ text_base = CONFIG_SYS_TEXT_BASE;
#else
- CONFIG_SYS_MONITOR_BASE, bss_start, bss_end);
+ text_base = CONFIG_SYS_MONITOR_BASE;
#endif
+
+ debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n",
+ text_base, bss_start, bss_end);
#endif
#ifdef CONFIG_MODEM_SUPPORT
struct sandbox_state *state = state_get_current();
const char *fname = state->fdt_fname;
void *blob;
- ssize_t size;
+ loff_t size;
int err;
int fd;
return -EINVAL;
}
- size = os_get_filesize(fname);
- if (size < 0) {
+ err = os_get_filesize(fname, &size);
+ if (err < 0) {
printf("Failed to file FDT file '%s'\n", fname);
- return -ENOENT;
+ return err;
}
fd = os_open(fname, OS_O_RDONLY);
if (fd < 0) {
setup_mon_len,
setup_fdt,
trace_early_init,
+ initf_malloc,
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
/* TODO: can this go into arch_cpu_init()? */
probecpu,
#endif
arch_cpu_init, /* basic arch cpu dependent setup */
-#ifdef CONFIG_X86
- cpu_init_f, /* TODO(sjg@chromium.org): remove */
-# ifdef CONFIG_OF_CONTROL
- find_fdt, /* TODO(sjg@chromium.org): remove */
-# endif
-#endif
mark_bootstage,
#ifdef CONFIG_OF_CONTROL
fdtdec_check_fdt,
#endif
- initf_malloc,
initf_dm,
#if defined(CONFIG_BOARD_EARLY_INIT_F)
board_early_init_f,
#endif
#if defined(CONFIG_HARD_SPI)
init_func_spi,
-#endif
-#ifdef CONFIG_X86
- dram_init_f, /* configure available RAM banks */
- calculate_relocation_address,
#endif
announce_dram_init,
/* TODO: unify all these dram functions? */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
dram_init, /* configure available RAM banks */
#endif
#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
static int initr_reloc(void)
{
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+ /* tell others: relocation done */
+ gd->flags |= GD_FLG_RELOC | GD_FLG_FULL_MALLOC_INIT;
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
return 0;
}
b_free(&temp);
/* loop on syntax errors, return on EOF */
- } while (rcode != 1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
+ } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
(inp->peek != static_peek || b_peek(inp)));
#ifndef __U_BOOT__
return 0;
*/
bootline = getenv("bootargs");
if (bootline) {
- memcpy((void *) bootaddr, bootline,
- max(strlen(bootline), 255));
- flush_cache(bootaddr, max(strlen(bootline), 255));
+ memcpy((void *)bootaddr, bootline,
+ max(strlen(bootline), (size_t)255));
+ flush_cache(bootaddr, max(strlen(bootline), (size_t)255));
} else {
sprintf(build_buf, CONFIG_SYS_VXWORKS_BOOT_DEVICE);
tmp = getenv("bootfile");
CONFIG_SYS_VXWORKS_ADD_PARAMS);
#endif
- memcpy((void *) bootaddr, build_buf,
- max(strlen(build_buf), 255));
- flush_cache(bootaddr, max(strlen(build_buf), 255));
+ memcpy((void *)bootaddr, build_buf,
+ max(strlen(build_buf), (size_t)255));
+ flush_cache(bootaddr, max(strlen(build_buf), (size_t)255));
}
/*
#if defined(CONFIG_CMD_EXT4_WRITE)
int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[])
+ char *const argv[])
{
- const char *filename = "/";
- int dev, part;
- unsigned long ram_address;
- unsigned long file_size;
- disk_partition_t info;
- block_dev_desc_t *dev_desc;
-
- if (argc < 6)
- return cmd_usage(cmdtp);
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- dev = dev_desc->dev;
-
- /* get the filename */
- filename = argv[4];
-
- /* get the address in hexadecimal format (string to int) */
- ram_address = simple_strtoul(argv[3], NULL, 16);
-
- /* get the filesize in hexadecimal format */
- file_size = simple_strtoul(argv[5], NULL, 16);
-
- /* set the device as block device */
- ext4fs_set_blk_dev(dev_desc, &info);
-
- /* mount the filesystem */
- if (!ext4fs_mount(info.size)) {
- printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part);
- goto fail;
- }
-
- /* start write */
- if (ext4fs_write(filename, (unsigned char *)ram_address, file_size)) {
- printf("** Error ext4fs_write() **\n");
- goto fail;
- }
- ext4fs_close();
-
- return 0;
-
-fail:
- ext4fs_close();
-
- return 1;
+ return do_save(cmdtp, flag, argc, argv, FS_TYPE_EXT);
}
-U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
- "create a file in the root directory",
- "<interface> <dev[:part]> <addr> <absolute filename path> [sizebytes]\n"
- " - create a file in / directory");
+U_BOOT_CMD(ext4write, 7, 1, do_ext4_write,
+ "create a file in the root directory",
+ "<interface> <dev[:part]> <addr> <absolute filename path>\n"
+ " [sizebytes] [file offset]\n"
+ " - create a file in / directory");
#endif
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'");
-U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
+U_BOOT_CMD(ext4load, 7, 0, do_ext4_load,
"load binary file from a Ext4 filesystem",
"<interface> [<dev[:part]> [addr [filename [bytes [pos]]]]]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
- long size;
+ loff_t size;
+ int ret;
unsigned long addr;
unsigned long count;
block_dev_desc_t *dev_desc = NULL;
count = simple_strtoul(argv[5], NULL, 16);
buf = map_sysmem(addr, count);
- size = file_fat_write(argv[4], buf, count);
+ ret = file_fat_write(argv[4], buf, 0, count, &size);
unmap_sysmem(buf);
- if (size == -1) {
+ if (ret < 0) {
printf("\n** Unable to write \"%s\" from %s %d:%d **\n",
argv[4], argv[1], dev, part);
return 1;
}
- printf("%ld bytes written\n", size);
+ printf("%llu bytes written\n", size);
return 0;
}
}
#ifdef CONFIG_OF_BOARD_SETUP
/* Call the board-specific fixup routine */
- else if (strncmp(argv[1], "boa", 3) == 0)
- ft_board_setup(working_fdt, gd->bd);
+ else if (strncmp(argv[1], "boa", 3) == 0) {
+ int err = ft_board_setup(working_fdt, gd->bd);
+
+ if (err) {
+ printf("Failed to update board information in FDT: %s\n",
+ fdt_strerror(err));
+ return CMD_RET_FAILURE;
+ }
+ }
+#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+ /* Call the board-specific fixup routine */
+ else if (strncmp(argv[1], "sys", 3) == 0) {
+ int err = ft_system_setup(working_fdt, gd->bd);
+
+ if (err) {
+ printf("Failed to add system information to FDT: %s\n",
+ fdt_strerror(err));
+ return CMD_RET_FAILURE;
+ }
+ }
#endif
/* Create a chosen node */
else if (strncmp(argv[1], "cho", 3) == 0) {
"addr [-c] <addr> [<length>] - Set the [control] fdt location to <addr>\n"
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
+#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+ "fdt systemsetup - Do system-specific set up\n"
#endif
"fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n"
"fdt resize - Resize fdt to size + padding to 4k addr\n"
unsigned int fpga;
ulong addr, length;
int rc = 0;
- u16 linebuf[DISP_LINE_LEN/sizeof(u16)];
+ u16 linebuf[DISP_LINE_LEN/sizeof(u16)];
+ ulong nbytes;
/*
* We use the last specified parameters, unless new ones are
length = simple_strtoul(argv[3], NULL, 16);
}
- /* Print the lines. */
- for (k = 0; k < DISP_LINE_LEN / sizeof(u16); ++k)
- fpga_get_reg(fpga, (u16 *)fpga_ptr[fpga] + k, k * sizeof(u16),
- &linebuf[k]);
- print_buffer(addr, (void *)linebuf, sizeof(u16),
- length, DISP_LINE_LEN / sizeof(u16));
- addr += sizeof(u16)*length;
+ nbytes = length * sizeof(u16);
+ do {
+ ulong linebytes = (nbytes > DISP_LINE_LEN) ?
+ DISP_LINE_LEN : nbytes;
+
+ for (k = 0; k < linebytes / sizeof(u16); ++k)
+ fpga_get_reg(fpga,
+ (u16 *)fpga_ptr[fpga] + addr
+ / sizeof(u16) + k,
+ addr + k * sizeof(u16),
+ &linebuf[k]);
+ print_buffer(addr, (void *)linebuf, sizeof(u16),
+ linebytes / sizeof(u16),
+ DISP_LINE_LEN / sizeof(u16));
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
dp_last_fpga = fpga;
dp_last_addr = addr;
" If 'pos' is 0 or omitted, the file is read from the start."
)
+static int do_save_wrapper(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ return do_save(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+ save, 7, 0, do_save_wrapper,
+ "save file to a filesystem",
+ "<interface> <dev[:part]> <addr> <filename> bytes [pos]\n"
+ " - Save binary file 'filename' to partition 'part' on device\n"
+ " type 'interface' instance 'dev' from addr 'addr' in memory.\n"
+ " 'bytes' gives the size to save in bytes and is mandatory.\n"
+ " 'pos' gives the file byte position to start writing to.\n"
+ " If 'pos' is 0 or omitted, the file is written from the start."
+)
+
static int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
--- /dev/null
+/*
+ * cmd_fs_uuid.c -- fsuuid command
+ *
+ * Copyright (C) 2014, Bachmann electronic GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fs.h>
+
+static int do_fs_uuid_wrapper(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ return do_fs_uuid(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+ fsuuid, 4, 1, do_fs_uuid_wrapper,
+ "Look up a filesystem UUID",
+ "<interface> <dev>:<part>\n"
+ " - print filesystem UUID\n"
+ "fsuuid <interface> <dev>:<part> <varname>\n"
+ " - set environment variable to filesystem UUID\n"
+);
return alen;
}
+enum i2c_err_op {
+ I2C_ERR_READ,
+ I2C_ERR_WRITE,
+};
+
+static int i2c_report_err(int ret, enum i2c_err_op op)
+{
+ printf("Error %s the chip: %d\n",
+ op == I2C_ERR_READ ? "reading" : "writing", ret);
+
+ return CMD_RET_FAILURE;
+}
+
/**
* do_i2c_read() - Handle the "i2c read" command-line command
* @cmdtp: Command data struct pointer
memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
- puts ("Error reading the chip.\n");
+ i2c_report_err(-1, I2C_ERR_READ);
return 1;
}
return 0;
while (length-- > 0) {
if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
- puts("Error writing to the chip.\n");
- return 1;
+ return i2c_report_err(-1, I2C_ERR_WRITE);
}
/*
* No write delay with FRAM devices.
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
- puts ("Error reading the chip.\n");
+ i2c_report_err(-1, I2C_ERR_READ);
else {
printf("%04x:", addr);
cp = linebuf;
while (count-- > 0) {
if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
- puts ("Error writing the chip.\n");
+ i2c_report_err(-1, I2C_ERR_WRITE);
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
addr++;
}
if (err > 0)
- puts ("Error reading the chip,\n");
+ i2c_report_err(-1, I2C_ERR_READ);
else
printf ("%08lx\n", crc);
do {
printf("%08lx:", addr);
if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
- puts ("\nError reading the chip,\n");
+ i2c_report_err(-1, I2C_ERR_READ);
else {
data = cpu_to_be32(data);
if (size == 1)
*/
bootretry_reset_cmd_timeout();
if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
- puts ("Error writing the chip.\n");
+ i2c_report_err(-1, I2C_ERR_WRITE);
#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
*/
while (1) {
if (i2c_read(chip, addr, alen, bytes, length) != 0)
- puts ("Error reading the chip.\n");
+ i2c_report_err(-1, I2C_ERR_READ);
udelay(delay);
}
chip = simple_strtoul(argv[1], NULL, 16);
if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
- puts("Error reading EDID content.\n");
+ i2c_report_err(-1, I2C_ERR_READ);
return 1;
}
#include <common.h>
#include <command.h>
#include <u-boot/md5.h>
+#include <asm/io.h>
/*
* Store the resulting sum to an address or variable
int verify = 0;
int ac;
char * const *av;
+ void *buf;
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(*av++, NULL, 16);
len = simple_strtoul(*av++, NULL, 16);
- md5_wd((unsigned char *) addr, len, output, CHUNKSZ_MD5);
+ buf = map_sysmem(addr, len);
+ md5_wd(buf, len, output, CHUNKSZ_MD5);
+ unmap_sysmem(buf);
if (!verify) {
printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
unsigned long addr, len;
unsigned int i;
u8 output[16];
+ void *buf;
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(argv[1], NULL, 16);
len = simple_strtoul(argv[2], NULL, 16);
- md5_wd((unsigned char *) addr, len, output, CHUNKSZ_MD5);
+ buf = map_sysmem(addr, len);
+ md5_wd(buf, len, output, CHUNKSZ_MD5);
+ unmap_sysmem(buf);
+
printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
for (i = 0; i < 16; i++)
printf("%02x", output[i]);
*/
void pciinfo(int BusNum, int ShortPCIListing)
{
+ struct pci_controller *hose = pci_bus_to_hose(BusNum);
int Device;
int Function;
unsigned char HeaderType;
unsigned short VendorID;
pci_dev_t dev;
+ if (!hose)
+ return;
+
printf("Scanning PCI devices on bus %d\n", BusNum);
if (ShortPCIListing) {
dev = PCI_BDF(BusNum, Device, Function);
+ if (pci_skip_dev(hose, dev))
+ continue;
+
pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
continue;
}
int sata_initialize(void) __attribute__((weak,alias("__sata_initialize")));
+__weak int __sata_stop(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++)
+ err |= reset_sata(i);
+
+ if (err)
+ printf("Could not reset some SATA devices\n");
+
+ return err;
+}
+int sata_stop(void) __attribute__((weak, alias("__sata_stop")));
+
#ifdef CONFIG_PARTITIONS
block_dev_desc_t *sata_get_dev(int dev)
{
{
int rc = 0;
- if (argc == 2 && strcmp(argv[1], "init") == 0)
+ if (argc == 2 && strcmp(argv[1], "stop") == 0)
+ return sata_stop();
+
+ if (argc == 2 && strcmp(argv[1], "init") == 0) {
+ if (sata_curr_device != -1)
+ sata_stop();
+
return sata_initialize();
+ }
/* If the user has not yet run `sata init`, do it now */
if (sata_curr_device == -1)
sata, 5, 1, do_sata,
"SATA sub system",
"init - init SATA sub system\n"
+ "sata stop - disable SATA sub system\n"
"sata info - show available SATA devices\n"
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
static struct spi_flash *flash;
-
/*
* This function computes the length argument for the erase command.
* The length on which the command is to operate can be given in two forms:
{
/* less accurate but avoids overflow */
if (len >= ((unsigned int) -1) / 1024)
- return len / (max(get_timer(start_ms) / 1024, 1));
+ return len / (max(get_timer(start_ms) / 1024, 1UL));
else
- return 1024 * len / max(get_timer(start_ms), 1);
+ return 1024 * len / max(get_timer(start_ms), 1UL);
}
static int do_spi_flash_probe(int argc, char * const argv[])
ulong last_update = get_timer(0);
for (; buf < end && !err_oper; buf += todo, offset += todo) {
- todo = min(end - buf, flash->sector_size);
+ todo = min_t(size_t, end - buf, flash->sector_size);
if (get_timer(last_update) > 100) {
printf(" \rUpdating, %zu%% %lu B/s",
100 - (end - buf) / scale,
for (i = 0; i < len; i++) {
if (vbuf[i] != 0xff) {
printf("Check failed at %d\n", i);
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
for (i = 0; i < len; i++) {
if (buf[i] != vbuf[i]) {
printf("Verify failed at %d, good data:\n", i);
- print_buffer(i, buf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, buf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
printf("Bad data:\n");
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
INTERNAL_SIZE_T nb;
#ifdef CONFIG_SYS_MALLOC_F_LEN
- if (gd && !(gd->flags & GD_FLG_RELOC)) {
- ulong new_ptr;
- void *ptr;
-
- new_ptr = gd->malloc_ptr + bytes;
- if (new_ptr > gd->malloc_limit)
- panic("Out of pre-reloc memory");
- ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
- gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
- return ptr;
- }
+ if (gd && !(gd->flags & GD_FLG_FULL_MALLOC_INIT))
+ return malloc_simple(bytes);
#endif
/* check if mem_malloc_init() was run */
#ifdef CONFIG_SYS_MALLOC_F_LEN
/* free() is a no-op - all the memory will be freed on relocation */
- if (!(gd->flags & GD_FLG_RELOC))
+ if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return;
#endif
if (oldmem == NULL) return mALLOc(bytes);
#ifdef CONFIG_SYS_MALLOC_F_LEN
- if (!(gd->flags & GD_FLG_RELOC)) {
+ if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
/* This is harder to support and should not be needed */
panic("pre-reloc realloc() is not supported");
}
else
{
#ifdef CONFIG_SYS_MALLOC_F_LEN
- if (!(gd->flags & GD_FLG_RELOC)) {
+ if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
MALLOC_ZERO(mem, sz);
return mem;
}
disk_partition_t info;
int dev, part;
int err;
+ loff_t size;
err = env_export(&env_new);
if (err)
return 1;
}
- err = file_fat_write(FAT_ENV_FILE, (void *)&env_new, sizeof(env_t));
+ err = file_fat_write(FAT_ENV_FILE, (void *)&env_new, 0, sizeof(env_t),
+ &size);
if (err == -1) {
printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
FAT_ENV_FILE, FAT_ENV_INTERFACE, dev, part);
u_char *char_ptr;
blocksize = nand_info[0].erasesize;
- len = min(blocksize, CONFIG_ENV_SIZE);
+ len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_saved < CONFIG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
if (!blocksize)
return 1;
- len = min(blocksize, CONFIG_ENV_SIZE);
+ len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_loaded < CONFIG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
#include <fdt_support.h>
#include <exports.h>
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(const void *fdt, const char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(fdt, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
/**
* fdt_getprop_u32_default_node - Return a node's property or a default
*
}
/**
- * fdt_find_or_add_subnode - find or possibly add a subnode of a given node
+ * fdt_find_or_add_subnode() - find or possibly add a subnode of a given node
+ *
* @fdt: pointer to the device tree blob
* @parentoffset: structure block offset of a node
* @name: name of the subnode to locate
* fdt_subnode_offset() finds a subnode of the node with a given name.
* If the subnode does not exist, it will be created.
*/
-static int fdt_find_or_add_subnode(void *fdt, int parentoffset,
- const char *name)
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name)
{
int offset;
return err;
}
- is_u64 = (get_cells_len(fdt, "#address-cells") == 8);
+ is_u64 = (fdt_address_cells(fdt, 0) == 2);
err = fdt_setprop_uxx(fdt, nodeoffset, "linux,initrd-start",
(uint64_t)initrd_start, is_u64);
/*
* fdt_pack_reg - pack address and size array into the "reg"-suitable stream
*/
-static int fdt_pack_reg(const void *fdt, void *buf, uint64_t *address,
- uint64_t *size, int n)
+static int fdt_pack_reg(const void *fdt, void *buf, u64 *address, u64 *size,
+ int n)
{
int i;
- int address_len = get_cells_len(fdt, "#address-cells");
- int size_len = get_cells_len(fdt, "#size-cells");
+ int address_len = fdt_address_cells(fdt, 0);
+ int size_len = fdt_size_cells(fdt, 0);
char *p = buf;
for (i = 0; i < n; i++) {
- if (address_len == 8)
+ if (address_len == 2)
*(fdt64_t *)p = cpu_to_fdt64(address[i]);
else
*(fdt32_t *)p = cpu_to_fdt32(address[i]);
p += address_len;
- if (size_len == 8)
+ if (size_len == 2)
*(fdt64_t *)p = cpu_to_fdt64(size[i]);
else
*(fdt32_t *)p = cpu_to_fdt32(size[i]);
{
const fdt32_t *prop;
- if (addrc) {
- prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
- if (prop)
- *addrc = be32_to_cpup(prop);
- else
- *addrc = 2;
- }
+ if (addrc)
+ *addrc = fdt_address_cells(blob, parentoffset);
if (sizec) {
prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
*/
int fdt_alloc_phandle(void *blob)
{
- int offset, phandle = 0;
+ int offset;
+ uint32_t phandle = 0;
for (offset = fdt_next_node(blob, -1, NULL); offset >= 0;
offset = fdt_next_node(blob, offset, NULL)) {
u32 naddr;
const fdt32_t *prop;
- prop = fdt_getprop(fdt, node, "#address-cells", &size);
- if (prop && size == 4)
- naddr = be32_to_cpup(prop);
- else
- naddr = 2;
+ naddr = fdt_address_cells(fdt, node);
prop = fdt_getprop(fdt, node, "ranges", &size);
return 0;
}
+
+/**
+ * fdt_setup_simplefb_node - Fill and enable a simplefb node
+ *
+ * @fdt: ptr to device tree
+ * @node: offset of the simplefb node
+ * @base_address: framebuffer base address
+ * @width: width in pixels
+ * @height: height in pixels
+ * @stride: bytes per line
+ * @format: pixel format string
+ *
+ * Convenience function to fill and enable a simplefb node.
+ */
+int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
+ u32 height, u32 stride, const char *format)
+{
+ char name[32];
+ fdt32_t cells[4];
+ int i, addrc, sizec, ret;
+
+ of_bus_default_count_cells(fdt, fdt_parent_offset(fdt, node),
+ &addrc, &sizec);
+ i = 0;
+ if (addrc == 2)
+ cells[i++] = cpu_to_fdt32(base_address >> 32);
+ cells[i++] = cpu_to_fdt32(base_address);
+ if (sizec == 2)
+ cells[i++] = 0;
+ cells[i++] = cpu_to_fdt32(height * stride);
+
+ ret = fdt_setprop(fdt, node, "reg", cells, sizeof(cells[0]) * i);
+ if (ret < 0)
+ return ret;
+
+ snprintf(name, sizeof(name), "framebuffer@%llx", base_address);
+ ret = fdt_set_name(fdt, node, name);
+ if (ret < 0)
+ return ret;
+
+ ret = fdt_setprop_u32(fdt, node, "width", width);
+ if (ret < 0)
+ return ret;
+
+ ret = fdt_setprop_u32(fdt, node, "height", height);
+ if (ret < 0)
+ return ret;
+
+ ret = fdt_setprop_u32(fdt, node, "stride", stride);
+ if (ret < 0)
+ return ret;
+
+ ret = fdt_setprop_string(fdt, node, "format", format);
+ if (ret < 0)
+ return ret;
+
+ ret = fdt_setprop_string(fdt, node, "status", "okay");
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
{
ulong *initrd_start = &images->initrd_start;
ulong *initrd_end = &images->initrd_end;
- int ret;
+ int ret = -EPERM;
+ int fdt_ret;
if (fdt_chosen(blob) < 0) {
- puts("ERROR: /chosen node create failed");
- puts(" - must RESET the board to recover.\n");
- return -1;
+ printf("ERROR: /chosen node create failed\n");
+ goto err;
}
if (arch_fixup_fdt(blob) < 0) {
- puts("ERROR: arch specific fdt fixup failed");
- return -1;
+ printf("ERROR: arch-specific fdt fixup failed\n");
+ goto err;
+ }
+ if (IMAGE_OF_BOARD_SETUP) {
+ fdt_ret = ft_board_setup(blob, gd->bd);
+ if (fdt_ret) {
+ printf("ERROR: board-specific fdt fixup failed: %s\n",
+ fdt_strerror(fdt_ret));
+ goto err;
+ }
+ }
+ if (IMAGE_OF_SYSTEM_SETUP) {
+ if (ft_system_setup(blob, gd->bd)) {
+ printf("ERROR: system-specific fdt fixup failed: %s\n",
+ fdt_strerror(fdt_ret));
+ goto err;
+ }
}
- if (IMAGE_OF_BOARD_SETUP)
- ft_board_setup(blob, gd->bd);
fdt_fixup_ethernet(blob);
/* Delete the old LMB reservation */
ret = fdt_shrink_to_minimum(blob);
if (ret < 0)
- return ret;
+ goto err;
of_size = ret;
if (*initrd_start && *initrd_end) {
fdt_initrd(blob, *initrd_start, *initrd_end);
if (!ft_verify_fdt(blob))
- return -1;
+ goto err;
#if defined(CONFIG_SOC_KEYSTONE)
if (IMAGE_OF_BOARD_SETUP)
#endif
return 0;
+err:
+ printf(" - must RESET the board to recover.\n\n");
+
+ return ret;
}
#include <splash.h>
#include <asm/io.h>
#include <asm/unaligned.h>
+#include <fdt_support.h>
#if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
defined(CONFIG_CPU_MONAHANS)
else
return;
- *axis = max(0, axis_alignment);
+ *axis = max(0, (int)axis_alignment);
}
#endif
void lcd_position_cursor(unsigned col, unsigned row)
{
- console_col = min(col, CONSOLE_COLS - 1);
- console_row = min(row, CONSOLE_ROWS - 1);
+ console_col = min_t(short, col, CONSOLE_COLS - 1);
+ console_row = min_t(short, row, CONSOLE_ROWS - 1);
}
int lcd_get_pixel_width(void)
#if defined(CONFIG_LCD_DT_SIMPLEFB)
static int lcd_dt_simplefb_configure_node(void *blob, int off)
{
- u32 stride;
- fdt32_t cells[2];
- int ret;
- static const char format[] =
#if LCD_BPP == LCD_COLOR16
- "r5g6b5";
+ return fdt_setup_simplefb_node(blob, off, gd->fb_base,
+ panel_info.vl_col, panel_info.vl_row,
+ panel_info.vl_col * 2, "r5g6b5");
#else
- "";
+ return -1;
#endif
-
- if (!format[0])
- return -1;
-
- stride = panel_info.vl_col * 2;
-
- cells[0] = cpu_to_fdt32(gd->fb_base);
- cells[1] = cpu_to_fdt32(stride * panel_info.vl_row);
- ret = fdt_setprop(blob, off, "reg", cells, sizeof(cells[0]) * 2);
- if (ret < 0)
- return -1;
-
- cells[0] = cpu_to_fdt32(panel_info.vl_col);
- ret = fdt_setprop(blob, off, "width", cells, sizeof(cells[0]));
- if (ret < 0)
- return -1;
-
- cells[0] = cpu_to_fdt32(panel_info.vl_row);
- ret = fdt_setprop(blob, off, "height", cells, sizeof(cells[0]));
- if (ret < 0)
- return -1;
-
- cells[0] = cpu_to_fdt32(stride);
- ret = fdt_setprop(blob, off, "stride", cells, sizeof(cells[0]));
- if (ret < 0)
- return -1;
-
- ret = fdt_setprop(blob, off, "format", format, strlen(format) + 1);
- if (ret < 0)
- return -1;
-
- ret = fdt_delprop(blob, off, "status");
- if (ret < 0)
- return -1;
-
- return 0;
}
int lcd_dt_simplefb_add_node(void *blob)
--- /dev/null
+/*
+ * Simple malloc implementation
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void *malloc_simple(size_t bytes)
+{
+ ulong new_ptr;
+ void *ptr;
+
+ new_ptr = gd->malloc_ptr + bytes;
+ if (new_ptr > gd->malloc_limit)
+ panic("Out of pre-reloc memory");
+ ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
+ gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
+ return ptr;
+}
+
+#ifdef CONFIG_SYS_MALLOC_SIMPLE
+void *calloc(size_t nmemb, size_t elem_size)
+{
+ size_t size = nmemb * elem_size;
+ void *ptr;
+
+ ptr = malloc(size);
+ memset(ptr, '\0', size);
+
+ return ptr;
+}
+#endif
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
#include <spl.h>
#include <asm/u-boot.h>
#include <nand.h>
#include <i2c.h>
#include <image.h>
#include <malloc.h>
+#include <dm/root.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
/* Nothing to do! */
}
+void spl_set_header_raw_uboot(void)
+{
+ spl_image.size = CONFIG_SYS_MONITOR_LEN;
+ spl_image.entry_point = CONFIG_SYS_UBOOT_START;
+ spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
+ spl_image.os = IH_OS_U_BOOT;
+ spl_image.name = "U-Boot";
+}
+
void spl_parse_image_header(const struct image_header *header)
{
u32 header_size = sizeof(struct image_header);
/* Signature not found - assume u-boot.bin */
debug("mkimage signature not found - ih_magic = %x\n",
header->ih_magic);
- spl_image.size = CONFIG_SYS_MONITOR_LEN;
- spl_image.entry_point = CONFIG_SYS_UBOOT_START;
- spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
- spl_image.os = IH_OS_U_BOOT;
- spl_image.name = "U-Boot";
+ spl_set_header_raw_uboot();
}
}
u32 boot_device;
debug(">>spl:board_init_r()\n");
-#ifdef CONFIG_SYS_SPL_MALLOC_START
+#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
+ gd->flags |= GD_FLG_FULL_MALLOC_INIT;
+#elif defined(CONFIG_SYS_MALLOC_F_LEN)
+ gd->malloc_limit = gd->malloc_base + CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_ptr = 0;
+#endif
+#ifdef CONFIG_SPL_DM
+ dm_init_and_scan(true);
#endif
#ifndef CONFIG_PPC
break;
#endif
default:
- debug("SPL: Un-supported Boot Device\n");
+#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("SPL: Unsupported Boot Device %d\n", boot_device);
+#endif
hang();
}
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
+#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
+ debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
+ gd->malloc_ptr / 1024);
+#endif
+
jump_to_image_no_args(&spl_image);
}
{
s32 err;
struct image_header *header;
- int filelen;
+ loff_t filelen, actlen;
disk_partition_t part_info = {};
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
goto end;
}
- filelen = err = ext4fs_open(filename);
+ err = ext4fs_open(filename, &filelen);
if (err < 0) {
puts("spl: ext4fs_open failed\n");
goto end;
}
- err = ext4fs_read((char *)header, sizeof(struct image_header));
+ err = ext4fs_read((char *)header, sizeof(struct image_header), &actlen);
if (err <= 0) {
puts("spl: ext4fs_read failed\n");
goto end;
spl_parse_image_header(header);
- err = ext4fs_read((char *)spl_image.load_addr, filelen);
+ err = ext4fs_read((char *)spl_image.load_addr, filelen, &actlen);
end:
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition)
{
int err;
- int filelen;
+ __maybe_unused loff_t filelen, actlen;
disk_partition_t part_info = {};
__maybe_unused char *file;
#if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT)
file = getenv("falcon_args_file");
if (file) {
- filelen = err = ext4fs_open(file);
+ err = ext4fs_open(file, &filelen);
if (err < 0) {
puts("spl: ext4fs_open failed\n");
goto defaults;
}
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen);
+ err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen);
if (err <= 0) {
printf("spl: error reading image %s, err - %d, falling back to default\n",
file, err);
defaults:
#endif
- filelen = err = ext4fs_open(CONFIG_SPL_FS_LOAD_ARGS_NAME);
+ err = ext4fs_open(CONFIG_SPL_FS_LOAD_ARGS_NAME, &filelen);
if (err < 0)
puts("spl: ext4fs_open failed\n");
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen);
+ err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen);
if (err <= 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("%s: error reading image %s, err - %d\n",
#include <asm/io.h>
#include <nand.h>
+#if defined(CONFIG_SPL_NAND_RAW_ONLY)
+void spl_nand_load_image(void)
+{
+ nand_init();
+
+ nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE,
+ (void *)CONFIG_SYS_NAND_U_BOOT_DST);
+ spl_set_header_raw_uboot();
+ nand_deselect();
+}
+#else
void spl_nand_load_image(void)
{
struct image_header *header;
spl_image.size, (void *)spl_image.load_addr);
nand_deselect();
}
+#endif
}
descriptor = (struct usb_hub_descriptor *)buffer;
- length = min(descriptor->bLength, sizeof(struct usb_hub_descriptor));
+ length = min_t(int, descriptor->bLength,
+ sizeof(struct usb_hub_descriptor));
if (usb_get_hub_descriptor(dev, buffer, length) < 0) {
debug("usb_hub_configure: failed to get hub " \
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
CONFIG_USB1_VBUS_PIN="PG11"
+CONFIG_VIDEO=n
+CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
CONFIG_USB1_VBUS_PIN="PG11"
+CONFIG_VIDEO=n
+CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
CONFIG_SPL=y
CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
+CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN6I=y
CONFIG_MACH_SUN8I=y
CONFIG_TARGET_IPPO_Q8H_V5=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
+CONFIG_VIDEO=n
+CONFIG_USB_KEYBOARD=n
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_FDTFILE="sun6i-a31-m9.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
# HDMI power ?
+S:CONFIG_AXP221_ALDO2_VOLT=1800
+S:CONFIG_AXP221_ALDO3_VOLT=3000
-# No Vbus gpio for usb1
-+S:CONFIG_USB1_VBUS_PIN=""
+# Vbus gpio for usb1
++S:CONFIG_USB1_VBUS_PIN="PC27"
+# No Vbus gpio for usb2
++S:CONFIG_USB2_VBUS_PIN=""
CONFIG_ARM=y
-+S:CONFIG_RMOBILE=y
+CONFIG_RMOBILE=y
CONFIG_TARGET_ALT=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_MMC_ENV_DEV=0"
+CONFIG_ARM=y
+CONFIG_TARGET_BCM28155_AP=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_BCM28155_AP=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000,ARMV7_NONSEC"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000,ARMV7_NONSEC"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
CONFIG_ARM=y
-CONFIG_TARGET_BCM958300K=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x01000000"
CONFIG_ARM=y
-CONFIG_TARGET_BCM958622HR=y
+CONFIG_TARGET_BCMNSP=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
+CONFIG_X86=y
+CONFIG_TARGET_CHROMEBOOK_LINK=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
+CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
+CONFIG_HAVE_MRC=y
+CONFIG_SMM_TSEG_SIZE=0x800000
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/cm_fx6/imximage.cfg,MX6QDL,SPL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_FX6=y
+CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
-CONFIG_ARM=y
-CONFIG_TARGET_CORVUS=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_CORVUS=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_RMOBILE=y
+CONFIG_TARGET_GOSE=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_GW_VENTANA=y
--- /dev/null
+CONFIG_PPC=y
+CONFIG_MPC83xx=y
+CONFIG_TARGET_HRCON=y
CONFIG_ARM=y
-+S:CONFIG_RMOBILE=y
+CONFIG_RMOBILE=y
CONFIG_TARGET_KOELSCH=y
CONFIG_ARM=y
-+S:CONFIG_RMOBILE=y
+CONFIG_RMOBILE=y
CONFIG_TARGET_LAGER=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6sabresd_spl.cfg,SPL,MX6Q"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_MX6SABRESD=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kosagi/novena/setup.cfg,MX6Q"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_KOSAGI_NOVENA=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4EK=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4EK=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SAMA5D4EK=y
CONFIG_SH=y
+CONFIG_SH_32BIT=y
CONFIG_TARGET_SH7752EVB=y
CONFIG_SH=y
+CONFIG_SH_32BIT=y
CONFIG_TARGET_SH7753EVB=y
CONFIG_SH=y
+CONFIG_SH_32BIT=y
CONFIG_TARGET_SH7757LCR=y
-CONFIG_SYS_EXTRA_OPTIONS="SH_32BIT=1"
CONFIG_SH=y
+CONFIG_SH_32BIT=y
CONFIG_TARGET_SH7785LCR=y
+CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
-CONFIG_ARM=y
-CONFIG_TARGET_TAURUS=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_TAURUS=y
- Each line of the configuration file contains exactly one instruction.
- Every numeric value must be encoded in hexadecimal and in format 0xabcdef12 .
- The configuration file is a concatenation of blocks called "sections" and
- optionally "DCD blocks" (see below).
+ optionally "DCD blocks" (see below), and optional flags lines.
- Each "section" is started by the "SECTION" instruction.
- The "SECTION" instruction has the following semantics:
NOOP
- This instruction does nothing.
-- If the verbose output from the BootROM is enabled, the BootROM will produce a
- letter on the Debug UART for each instruction it started processing. Here is a
- mapping between the above instructions and the BootROM verbose output:
+ - An optional flags lines can be one of the following:
+
+ DISPLAYPROGRESS
+ - Enable boot progress output form the BootROM.
+
+- If the boot progress output from the BootROM is enabled, the BootROM will
+ produce a letter on the Debug UART for each instruction it started processing.
+ Here is a mapping between the above instructions and the BootROM output:
H -- SB Image header loaded
T -- TAG instruction
--- /dev/null
+Intel LPC Device Binding
+========================
+
+The device tree node which describes the operation of the Intel Low Pin
+Count device is as follows:
+
+Required properties :
+- compatible = "intel,lpc"
+- gen-dec : Specifies the values for the gen-dec registers. Up to four cell
+ pairs can be provided - the first of each pair is the base address and
+ the second is the size. These are written into the GENx_DEC registers of
+ the LPC device
+
+
+Example
+-------
+
+lpc {
+ compatible = "intel,lpc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gen-dec = <0x800 0xfc 0x900 0xfc>;
+};
pointer is saved but not made available through the driver model API).
-Things to punt for later
-------------------------
+SPL Support
+-----------
+
+Driver model can operate in SPL. Its efficient implementation and small code
+size provide for a small overhead which is acceptable for all but the most
+constrained systems.
+
+To enable driver model in SPL, define CONFIG_SPL_DM. You might want to
+consider the following option also. See the main README for more details.
+
+ - CONFIG_SYS_MALLOC_SIMPLE
+ - CONFIG_DM_WARN
+ - CONFIG_DM_DEVICE_REMOVE
+ - CONFIG_DM_STDIO
-- SPL support - this will have to be present before many drivers can be
-converted, but it seems like we can add it once we are happy with the
-core implementation.
-That is not to say that no thinking has gone into this - in fact there
-is quite a lot there. However, getting these right is non-trivial and
-there is a high cost associated with going down the wrong path.
+Enabling Driver Model
+---------------------
-For SPL, it may be possible to fit in a simplified driver model with only
-bind and probe methods, to reduce size.
+Driver model is being brought into U-Boot gradually. As each subsystems gets
+support, a uclass is created and a CONFIG to enable use of driver model for
+that subsystem.
+
+For example CONFIG_DM_SERIAL enables driver model for serial. With that
+defined, the old serial support is not enabled, and your serial driver must
+conform to driver model. With that undefined, the old serial support is
+enabled and driver model is not available for serial. This means that when
+you convert a driver, you must either convert all its boards, or provide for
+the driver to be compiled both with and without driver model (generally this
+is not very hard).
+
+See the main README for full details of the available driver model CONFIG
+options.
+
+
+Things to punt for later
+------------------------
Uclasses are statically numbered at compile time. It would be possible to
change this to dynamic numbering, but then we would require some sort of
obj-y += input/
# SOC specific infrastructure drivers.
obj-y += soc/
+obj-y += thermal/
u16 now_blocks; /* number of blocks per iteration */
u32 transfer_size; /* number of bytes per iteration */
- now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks);
+ now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
transfer_size = ATA_SECT_SIZE * now_blocks;
if (transfer_size > user_buffer_size) {
return 0;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
static inline u8 sata_inb(unsigned long ioaddr)
{
return inb(ioaddr);
return 0;
}
+int reset_sata(int dev)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_host_regs *host_mmio =
+ (struct sata_host_regs *)probe_ent->mmio_base;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("The sata index %d is out of ranges\n\r", dev);
+ return -1;
+ }
+
+ setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
+ while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
+ udelay(100);
+
+ disable_sata_clock();
+
+ return 0;
+}
+
static void dwc_ahsata_print_info(int dev)
{
block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
return 0;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
{
printf("\n\rSATA: %08x\n\r", (u32)reg);
return res;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
/* Read up to 255 sectors
*
* Returns sectors read
return rc;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
static u8 ata_check_altstatus(struct ata_port *ap)
{
u8 val = 0;
u16 word;
if (init_done == 1 && dev < sata_info.maxport)
- return 1;
+ return 0;
init_done = 1;
return 0;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
/*
* SATA interface between low level driver and command layer
*/
return res;
}
+int reset_sata(int dev)
+{
+ return 0;
+}
+
/* Check if device is connected to port */
int sata_bus_probe (int portno)
{
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := device.o lists.o root.o uclass.o util.o
+obj-$(CONFIG_DM) += device.o lists.o root.o uclass.o util.o
obj-$(CONFIG_OF_CONTROL) += simple-bus.o
+obj-$(CONFIG_DM_DEVICE_REMOVE) += device-remove.o
--- /dev/null
+/*
+ * Device manager
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * (C) Copyright 2012
+ * Pavel Herrmann <morpheus.ibis@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <dm/device.h>
+#include <dm/device-internal.h>
+#include <dm/uclass.h>
+#include <dm/uclass-internal.h>
+#include <dm/util.h>
+
+/**
+ * device_chld_unbind() - Unbind all device's children from the device
+ *
+ * On error, the function continues to unbind all children, and reports the
+ * first error.
+ *
+ * @dev: The device that is to be stripped of its children
+ * @return 0 on success, -ve on error
+ */
+static int device_chld_unbind(struct udevice *dev)
+{
+ struct udevice *pos, *n;
+ int ret, saved_ret = 0;
+
+ assert(dev);
+
+ list_for_each_entry_safe(pos, n, &dev->child_head, sibling_node) {
+ ret = device_unbind(pos);
+ if (ret && !saved_ret)
+ saved_ret = ret;
+ }
+
+ return saved_ret;
+}
+
+/**
+ * device_chld_remove() - Stop all device's children
+ * @dev: The device whose children are to be removed
+ * @return 0 on success, -ve on error
+ */
+static int device_chld_remove(struct udevice *dev)
+{
+ struct udevice *pos, *n;
+ int ret;
+
+ assert(dev);
+
+ list_for_each_entry_safe(pos, n, &dev->child_head, sibling_node) {
+ ret = device_remove(pos);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int device_unbind(struct udevice *dev)
+{
+ struct driver *drv;
+ int ret;
+
+ if (!dev)
+ return -EINVAL;
+
+ if (dev->flags & DM_FLAG_ACTIVATED)
+ return -EINVAL;
+
+ drv = dev->driver;
+ assert(drv);
+
+ if (drv->unbind) {
+ ret = drv->unbind(dev);
+ if (ret)
+ return ret;
+ }
+
+ ret = device_chld_unbind(dev);
+ if (ret)
+ return ret;
+
+ ret = uclass_unbind_device(dev);
+ if (ret)
+ return ret;
+
+ if (dev->parent)
+ list_del(&dev->sibling_node);
+ free(dev);
+
+ return 0;
+}
+
+/**
+ * device_free() - Free memory buffers allocated by a device
+ * @dev: Device that is to be started
+ */
+void device_free(struct udevice *dev)
+{
+ int size;
+
+ if (dev->driver->priv_auto_alloc_size) {
+ free(dev->priv);
+ dev->priv = NULL;
+ }
+ if (dev->flags & DM_FLAG_ALLOC_PDATA) {
+ free(dev->platdata);
+ dev->platdata = NULL;
+ }
+ size = dev->uclass->uc_drv->per_device_auto_alloc_size;
+ if (size) {
+ free(dev->uclass_priv);
+ dev->uclass_priv = NULL;
+ }
+ if (dev->parent) {
+ size = dev->parent->driver->per_child_auto_alloc_size;
+ if (size) {
+ free(dev->parent_priv);
+ dev->parent_priv = NULL;
+ }
+ }
+}
+
+int device_remove(struct udevice *dev)
+{
+ struct driver *drv;
+ int ret;
+
+ if (!dev)
+ return -EINVAL;
+
+ if (!(dev->flags & DM_FLAG_ACTIVATED))
+ return 0;
+
+ drv = dev->driver;
+ assert(drv);
+
+ ret = uclass_pre_remove_device(dev);
+ if (ret)
+ return ret;
+
+ ret = device_chld_remove(dev);
+ if (ret)
+ goto err;
+
+ if (drv->remove) {
+ ret = drv->remove(dev);
+ if (ret)
+ goto err_remove;
+ }
+
+ if (dev->parent && dev->parent->driver->child_post_remove) {
+ ret = dev->parent->driver->child_post_remove(dev);
+ if (ret) {
+ dm_warn("%s: Device '%s' failed child_post_remove()",
+ __func__, dev->name);
+ }
+ }
+
+ device_free(dev);
+
+ dev->seq = -1;
+ dev->flags &= ~DM_FLAG_ACTIVATED;
+
+ return ret;
+
+err_remove:
+ /* We can't put the children back */
+ dm_warn("%s: Device '%s' failed to remove, but children are gone\n",
+ __func__, dev->name);
+err:
+ ret = uclass_post_probe_device(dev);
+ if (ret) {
+ dm_warn("%s: Device '%s' failed to post_probe on error path\n",
+ __func__, dev->name);
+ }
+
+ return ret;
+}
DECLARE_GLOBAL_DATA_PTR;
-/**
- * device_chld_unbind() - Unbind all device's children from the device
- *
- * On error, the function continues to unbind all children, and reports the
- * first error.
- *
- * @dev: The device that is to be stripped of its children
- * @return 0 on success, -ve on error
- */
-static int device_chld_unbind(struct udevice *dev)
-{
- struct udevice *pos, *n;
- int ret, saved_ret = 0;
-
- assert(dev);
-
- list_for_each_entry_safe(pos, n, &dev->child_head, sibling_node) {
- ret = device_unbind(pos);
- if (ret && !saved_ret)
- saved_ret = ret;
- }
-
- return saved_ret;
-}
-
-/**
- * device_chld_remove() - Stop all device's children
- * @dev: The device whose children are to be removed
- * @return 0 on success, -ve on error
- */
-static int device_chld_remove(struct udevice *dev)
-{
- struct udevice *pos, *n;
- int ret;
-
- assert(dev);
-
- list_for_each_entry_safe(pos, n, &dev->child_head, sibling_node) {
- ret = device_remove(pos);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
int device_bind(struct udevice *parent, struct driver *drv, const char *name,
void *platdata, int of_offset, struct udevice **devp)
{
-1, devp);
}
-int device_unbind(struct udevice *dev)
-{
- struct driver *drv;
- int ret;
-
- if (!dev)
- return -EINVAL;
-
- if (dev->flags & DM_FLAG_ACTIVATED)
- return -EINVAL;
-
- drv = dev->driver;
- assert(drv);
-
- if (drv->unbind) {
- ret = drv->unbind(dev);
- if (ret)
- return ret;
- }
-
- ret = device_chld_unbind(dev);
- if (ret)
- return ret;
-
- ret = uclass_unbind_device(dev);
- if (ret)
- return ret;
-
- if (dev->parent)
- list_del(&dev->sibling_node);
- free(dev);
-
- return 0;
-}
-
-/**
- * device_free() - Free memory buffers allocated by a device
- * @dev: Device that is to be started
- */
-static void device_free(struct udevice *dev)
-{
- int size;
-
- if (dev->driver->priv_auto_alloc_size) {
- free(dev->priv);
- dev->priv = NULL;
- }
- if (dev->flags & DM_FLAG_ALLOC_PDATA) {
- free(dev->platdata);
- dev->platdata = NULL;
- }
- size = dev->uclass->uc_drv->per_device_auto_alloc_size;
- if (size) {
- free(dev->uclass_priv);
- dev->uclass_priv = NULL;
- }
- if (dev->parent) {
- size = dev->parent->driver->per_child_auto_alloc_size;
- if (size) {
- free(dev->parent_priv);
- dev->parent_priv = NULL;
- }
- }
-}
-
int device_probe_child(struct udevice *dev, void *parent_priv)
{
struct driver *drv;
return device_probe_child(dev, NULL);
}
-int device_remove(struct udevice *dev)
-{
- struct driver *drv;
- int ret;
-
- if (!dev)
- return -EINVAL;
-
- if (!(dev->flags & DM_FLAG_ACTIVATED))
- return 0;
-
- drv = dev->driver;
- assert(drv);
-
- ret = uclass_pre_remove_device(dev);
- if (ret)
- return ret;
-
- ret = device_chld_remove(dev);
- if (ret)
- goto err;
-
- if (drv->remove) {
- ret = drv->remove(dev);
- if (ret)
- goto err_remove;
- }
-
- if (dev->parent && dev->parent->driver->child_post_remove) {
- ret = dev->parent->driver->child_post_remove(dev);
- if (ret) {
- dm_warn("%s: Device '%s' failed child_post_remove()",
- __func__, dev->name);
- }
- }
-
- device_free(dev);
-
- dev->seq = -1;
- dev->flags &= ~DM_FLAG_ACTIVATED;
-
- return ret;
-
-err_remove:
- /* We can't put the children back */
- dm_warn("%s: Device '%s' failed to remove, but children are gone\n",
- __func__, dev->name);
-err:
- ret = uclass_post_probe_device(dev);
- if (ret) {
- dm_warn("%s: Device '%s' failed to post_probe on error path\n",
- __func__, dev->name);
- }
-
- return ret;
-}
-
void *dev_get_platdata(struct udevice *dev)
{
if (!dev) {
return 0;
}
+
+struct udevice *dev_get_parent(struct udevice *child)
+{
+ return child->parent;
+}
+
+ulong dev_get_of_data(struct udevice *dev)
+{
+ return dev->of_id->data;
+}
const int n_ents = ll_entry_count(struct driver, driver);
struct driver *entry;
- if (!drv || !n_ents)
- return NULL;
-
for (entry = drv; entry != drv + n_ents; entry++) {
if (!strcmp(name, entry->name))
return entry;
const int n_ents = ll_entry_count(struct uclass_driver, uclass);
struct uclass_driver *entry;
- if ((id == UCLASS_INVALID) || !uclass)
- return NULL;
-
for (entry = uclass; entry != uclass + n_ents; entry++) {
if (entry->id == id)
return entry;
return result;
}
+int device_bind_driver(struct udevice *parent, const char *drv_name,
+ const char *dev_name, struct udevice **devp)
+{
+ struct driver *drv;
+ int ret;
+
+ drv = lists_driver_lookup_name(drv_name);
+ if (!drv) {
+ printf("Cannot find driver '%s'\n", drv_name);
+ return -ENOENT;
+ }
+ ret = device_bind(parent, drv, dev_name, NULL, -1, devp);
+ if (ret) {
+ printf("Cannot create device named '%s' (err=%d)\n",
+ dev_name, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_OF_CONTROL
/**
* driver_check_compatible() - Check if a driver is compatible with this node
*
* @param blob: Device tree pointer
* @param offset: Offset of node in device tree
- * @param of_matchL List of compatible strings to match
+ * @param of_match: List of compatible strings to match
+ * @param of_idp: Returns the match that was found
* @return 0 if there is a match, -ENOENT if no match, -ENODEV if the node
* does not have a compatible string, other error <0 if there is a device
* tree error
*/
static int driver_check_compatible(const void *blob, int offset,
- const struct udevice_id *of_match)
+ const struct udevice_id *of_match,
+ const struct udevice_id **of_idp)
{
int ret;
+ *of_idp = NULL;
if (!of_match)
return -ENOENT;
while (of_match->compatible) {
ret = fdt_node_check_compatible(blob, offset,
of_match->compatible);
- if (!ret)
+ if (!ret) {
+ *of_idp = of_match;
return 0;
- else if (ret == -FDT_ERR_NOTFOUND)
+ } else if (ret == -FDT_ERR_NOTFOUND) {
return -ENODEV;
- else if (ret < 0)
+ } else if (ret < 0) {
return -EINVAL;
+ }
of_match++;
}
{
struct driver *driver = ll_entry_start(struct driver, driver);
const int n_ents = ll_entry_count(struct driver, driver);
+ const struct udevice_id *id;
struct driver *entry;
struct udevice *dev;
bool found = false;
if (devp)
*devp = NULL;
for (entry = driver; entry != driver + n_ents; entry++) {
- ret = driver_check_compatible(blob, offset, entry->of_match);
+ ret = driver_check_compatible(blob, offset, entry->of_match,
+ &id);
name = fdt_get_name(blob, offset, NULL);
if (ret == -ENOENT) {
continue;
break;
} else if (ret) {
dm_warn("Device tree error at offset %d\n", offset);
- if (!result || ret != -ENOENT)
- result = ret;
+ result = ret;
break;
}
dm_warn("Error binding driver '%s'\n", entry->name);
return ret;
} else {
+ dev->of_id = id;
found = true;
if (devp)
*devp = dev;
dm_warn("Some drivers were not found\n");
ret = 0;
}
- if (ret)
- return ret;
- return 0;
+ return ret;
}
#ifdef CONFIG_OF_CONTROL
#ifdef CONFIG_SYS_FSL_DDR4
/* tXP=max(4nCK, 6ns) */
- int txp = max(mclk_ps * 4, 6000); /* unit=ps */
+ int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */
trwt_mclk = 2;
twrt_mclk = 1;
act_pd_exit_mclk = picos_to_mclk(txp);
* MRS_CYC = max(tMRD, tMOD)
* tMRD = 8nCK, tMOD = max(24nCK, 15ns)
*/
- tmrd_mclk = max(24, picos_to_mclk(15000));
+ tmrd_mclk = max(24U, picos_to_mclk(15000));
#elif defined(CONFIG_SYS_FSL_DDR3)
unsigned int data_rate = get_ddr_freq(0);
int txp;
* spec has not the tAXPD, we use
* tAXPD=1, need design to confirm.
*/
- txp = max(mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
+ txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
tmrd_mclk = 4;
/* set the turnaround time */
#ifdef CONFIG_SYS_FSL_DDR4
refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8;
wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4);
- wrtord_mclk = max(2, picos_to_mclk(2500));
+ acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4U);
+ wrtord_mclk = max(2U, picos_to_mclk(2500));
if ((wrrec_mclk < 1) || (wrrec_mclk > 24))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
wr_data_delay = popts->write_data_delay;
#ifdef CONFIG_SYS_FSL_DDR4
cpo = 0;
- cke_pls = max(3, picos_to_mclk(5000));
+ cke_pls = max(3U, picos_to_mclk(5000));
#elif defined(CONFIG_SYS_FSL_DDR3)
/*
* cke pulse = max(3nCK, 7.5ns) for DDR3-800
* max(3nCK, 5.625ns) for DDR3-1066, 1333
* max(3nCK, 5ns) for DDR3-1600, 1866, 2133
*/
- cke_pls = max(3, picos_to_mclk(mclk_ps > 1870 ? 7500 :
+ cke_pls = max(3U, picos_to_mclk(mclk_ps > 1870 ? 7500 :
(mclk_ps > 1245 ? 5625 : 5000)));
#else
cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR;
unsigned int txpr, tcksre, tcksrx;
unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
- txpr = max(5, picos_to_mclk(common_dimm->trfc1_ps + 10000));
- tcksre = max(5, picos_to_mclk(10000));
- tcksrx = max(5, picos_to_mclk(10000));
+ txpr = max(5U, picos_to_mclk(common_dimm->trfc1_ps + 10000));
+ tcksre = max(5U, picos_to_mclk(10000));
+ tcksrx = max(5U, picos_to_mclk(10000));
par_lat = 0;
cs_to_cmd = 0;
}
acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps);
- wrtord_bg = max(4, picos_to_mclk(7500));
+ wrtord_bg = max(4U, picos_to_mclk(7500));
if (popts->otf_burst_chop_en)
wrtord_bg += 2;
* Find minimum tckmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
*/
- tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
+ tckmax_ps = min(tckmax_ps,
+ (unsigned int)dimm_params[i].tckmax_ps);
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
- taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
+ taamin_ps = max(taamin_ps,
+ (unsigned int)dimm_params[i].taa_ps);
#endif
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
- trp_ps = max(trp_ps, dimm_params[i].trp_ps);
- tras_ps = max(tras_ps, dimm_params[i].tras_ps);
+ tckmin_x_ps = max(tckmin_x_ps,
+ (unsigned int)dimm_params[i].tckmin_x_ps);
+ trcd_ps = max(trcd_ps, (unsigned int)dimm_params[i].trcd_ps);
+ trp_ps = max(trp_ps, (unsigned int)dimm_params[i].trp_ps);
+ tras_ps = max(tras_ps, (unsigned int)dimm_params[i].tras_ps);
#ifdef CONFIG_SYS_FSL_DDR4
- trfc1_ps = max(trfc1_ps, dimm_params[i].trfc1_ps);
- trfc2_ps = max(trfc2_ps, dimm_params[i].trfc2_ps);
- trfc4_ps = max(trfc4_ps, dimm_params[i].trfc4_ps);
- trrds_ps = max(trrds_ps, dimm_params[i].trrds_ps);
- trrdl_ps = max(trrdl_ps, dimm_params[i].trrdl_ps);
- tccdl_ps = max(tccdl_ps, dimm_params[i].tccdl_ps);
+ trfc1_ps = max(trfc1_ps,
+ (unsigned int)dimm_params[i].trfc1_ps);
+ trfc2_ps = max(trfc2_ps,
+ (unsigned int)dimm_params[i].trfc2_ps);
+ trfc4_ps = max(trfc4_ps,
+ (unsigned int)dimm_params[i].trfc4_ps);
+ trrds_ps = max(trrds_ps,
+ (unsigned int)dimm_params[i].trrds_ps);
+ trrdl_ps = max(trrdl_ps,
+ (unsigned int)dimm_params[i].trrdl_ps);
+ tccdl_ps = max(tccdl_ps,
+ (unsigned int)dimm_params[i].tccdl_ps);
#else
- twr_ps = max(twr_ps, dimm_params[i].twr_ps);
- twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
- trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
- trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
- trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
+ twr_ps = max(twr_ps, (unsigned int)dimm_params[i].twr_ps);
+ twtr_ps = max(twtr_ps, (unsigned int)dimm_params[i].twtr_ps);
+ trfc_ps = max(trfc_ps, (unsigned int)dimm_params[i].trfc_ps);
+ trrd_ps = max(trrd_ps, (unsigned int)dimm_params[i].trrd_ps);
+ trtp_ps = max(trtp_ps, (unsigned int)dimm_params[i].trtp_ps);
#endif
- trc_ps = max(trc_ps, dimm_params[i].trc_ps);
+ trc_ps = max(trc_ps, (unsigned int)dimm_params[i].trc_ps);
#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
- tis_ps = max(tis_ps, dimm_params[i].tis_ps);
- tih_ps = max(tih_ps, dimm_params[i].tih_ps);
- tds_ps = max(tds_ps, dimm_params[i].tds_ps);
- tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
- tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
+ tis_ps = max(tis_ps, (unsigned int)dimm_params[i].tis_ps);
+ tih_ps = max(tih_ps, (unsigned int)dimm_params[i].tih_ps);
+ tds_ps = max(tds_ps, (unsigned int)dimm_params[i].tds_ps);
+ tdh_ps = max(tdh_ps, (unsigned int)dimm_params[i].tdh_ps);
+ tqhs_ps = max(tqhs_ps, (unsigned int)dimm_params[i].tqhs_ps);
/*
* Find maximum tdqsq_max_ps to find slowest.
*
* FIXME: is finding the slowest value the correct
* strategy for this parameter?
*/
- tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
+ tdqsq_max_ps = max(tdqsq_max_ps,
+ (unsigned int)dimm_params[i].tdqsq_max_ps);
#endif
refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
+ (unsigned int)dimm_params[i].refresh_rate_ps);
/* extended_op_srt is either 0 or 1, 0 having priority */
extended_op_srt = min(extended_op_srt,
- dimm_params[i].extended_op_srt);
+ (unsigned int)dimm_params[i].extended_op_srt);
}
outpdimm->ndimms_present = number_of_dimms - temp1;
i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1);
ret = i2c_read(i2c_address, 0, 1,
(uchar *)((ulong)spd + 256),
- min(256, sizeof(generic_spd_eeprom_t) - 256));
+ min(256,
+ (int)sizeof(generic_spd_eeprom_t) - 256));
}
#else
ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
readn = 0;
while (size > 0) {
/* get chunk that can be read */
- chunk = min(size, dfu->b_left);
+ chunk = min((long)size, dfu->b_left);
/* consume */
if (chunk > 0) {
memcpy(buf, dfu->i_buf, chunk);
unsigned long ts; /* Timestamp */
u32 isr_status, swap;
u32 partialbit = 0;
- u32 blocksize;
- u32 pos = 0;
+ loff_t blocksize, actread;
+ loff_t pos = 0;
int fstype;
char *interface, *dev_part, *filename;
if (fs_set_blk_dev(interface, dev_part, fstype))
return FPGA_FAIL;
- if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+ if (fs_read(filename, (u32) buf, pos, blocksize, &actread) < 0)
return FPGA_FAIL;
if (zynq_validate_bitstream(desc, buf, bsize, blocksize, &swap,
return FPGA_FAIL;
if (bsize > blocksize) {
- if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+ if (fs_read(filename, (u32) buf, pos, blocksize, &actread) < 0)
return FPGA_FAIL;
} else {
- if (fs_read(filename, (u32) buf, pos, bsize) < 0)
+ if (fs_read(filename, (u32) buf, pos, bsize, &actread) < 0)
return FPGA_FAIL;
}
} while (bsize > blocksize);
#include <config.h>
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
#include <linux/sizes.h>
+#include <asm/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+
+#define GPIO_PER_BANK 32
static struct at91_port *at91_pio_get_port(unsigned port)
{
}
}
+static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset,
+ int use_pullup)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ if (use_pullup)
+ writel(mask, &at91_port->puer);
+ else
+ writel(mask, &at91_port->pudr);
+ writel(mask, &at91_port->per);
+}
+
int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
{
struct at91_port *at91_port = at91_pio_get_port(port);
- u32 mask;
- if (at91_port && (pin < 32)) {
- mask = 1 << pin;
- if (use_pullup)
- writel(1 << pin, &at91_port->puer);
- else
- writel(1 << pin, &at91_port->pudr);
- writel(mask, &at91_port->per);
- }
+ if (at91_port && (pin < GPIO_PER_BANK))
+ at91_set_port_pullup(at91_port, pin, use_pullup);
return 0;
}
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
}
#endif
+#ifdef CONFIG_DM_GPIO
+static bool at91_get_port_output(struct at91_port *at91_port, int offset)
+{
+ u32 mask, val;
+
+ mask = 1 << offset;
+ val = readl(&at91_port->osr);
+ return val & mask;
+}
+#endif
+
+static void at91_set_port_input(struct at91_port *at91_port, int offset,
+ int use_pullup)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ writel(mask, &at91_port->idr);
+ at91_set_port_pullup(at91_port, offset, use_pullup);
+ writel(mask, &at91_port->odr);
+ writel(mask, &at91_port->per);
+}
+
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
* configure it for an input.
int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
{
struct at91_port *at91_port = at91_pio_get_port(port);
- u32 mask;
- if (at91_port && (pin < 32)) {
- mask = 1 << pin;
- writel(mask, &at91_port->idr);
- at91_set_pio_pullup(port, pin, use_pullup);
- writel(mask, &at91_port->odr);
- writel(mask, &at91_port->per);
- }
+ if (at91_port && (pin < GPIO_PER_BANK))
+ at91_set_port_input(at91_port, pin, use_pullup);
return 0;
}
+static void at91_set_port_output(struct at91_port *at91_port, int offset,
+ int value)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ writel(mask, &at91_port->idr);
+ writel(mask, &at91_port->pudr);
+ if (value)
+ writel(mask, &at91_port->sodr);
+ else
+ writel(mask, &at91_port->codr);
+ writel(mask, &at91_port->oer);
+ writel(mask, &at91_port->per);
+}
+
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral),
* and configure it for an output.
int at91_set_pio_output(unsigned port, u32 pin, int value)
{
struct at91_port *at91_port = at91_pio_get_port(port);
- u32 mask;
- if (at91_port && (port < ATMEL_PIO_PORTS) && (pin < 32)) {
- mask = 1 << pin;
- writel(mask, &at91_port->idr);
- writel(mask, &at91_port->pudr);
- if (value)
- writel(mask, &at91_port->sodr);
- else
- writel(mask, &at91_port->codr);
- writel(mask, &at91_port->oer);
- writel(mask, &at91_port->per);
- }
+ if (at91_port && (pin < GPIO_PER_BANK))
+ at91_set_port_output(at91_port, pin, value);
return 0;
}
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
if (is_on) {
#if defined(CPU_HAS_PIO3)
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
if (is_on) {
writel(mask, &at91_port->ifscer);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(mask, &at91_port->pudr);
if (is_on)
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
writel(readl(&at91_port->schmitt) | mask,
&at91_port->schmitt);
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
- if (at91_port && (pin < 32)) {
+ if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
if (is_on)
writel(mask, &at91_port->mder);
return 0;
}
+static void at91_set_port_value(struct at91_port *at91_port, int offset,
+ int value)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ if (value)
+ writel(mask, &at91_port->sodr);
+ else
+ writel(mask, &at91_port->codr);
+}
+
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
int at91_set_pio_value(unsigned port, unsigned pin, int value)
{
struct at91_port *at91_port = at91_pio_get_port(port);
- u32 mask;
- if (at91_port && (pin < 32)) {
- mask = 1 << pin;
- if (value)
- writel(mask, &at91_port->sodr);
- else
- writel(mask, &at91_port->codr);
- }
+ if (at91_port && (pin < GPIO_PER_BANK))
+ at91_set_port_value(at91_port, pin, value);
return 0;
}
+static int at91_get_port_value(struct at91_port *at91_port, int offset)
+{
+ u32 pdsr = 0, mask;
+
+ mask = 1 << offset;
+ pdsr = readl(&at91_port->pdsr) & mask;
+
+ return pdsr != 0;
+}
/*
* read the pin's value (works even if it's not muxed as a gpio).
*/
int at91_get_pio_value(unsigned port, unsigned pin)
{
struct at91_port *at91_port = at91_pio_get_port(port);
- u32 pdsr = 0, mask;
- if (at91_port && (pin < 32)) {
- mask = 1 << pin;
- pdsr = readl(&at91_port->pdsr) & mask;
- }
+ if (at91_port && (pin < GPIO_PER_BANK))
+ return at91_get_port_value(at91_port, pin);
- return pdsr != 0;
+ return 0;
}
+#ifndef CONFIG_DM_GPIO
/* Common GPIO API */
int gpio_request(unsigned gpio, const char *label)
return 0;
}
+#endif
+
+#ifdef CONFIG_DM_GPIO
+
+struct at91_port_priv {
+ struct at91_port *regs;
+};
+
+/* set GPIO pin 'gpio' as an input */
+static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+ struct at91_port_priv *port = dev_get_platdata(dev);
+
+ at91_set_port_input(port->regs, offset, 0);
+
+ return 0;
+}
+
+/* set GPIO pin 'gpio' as an output, with polarity 'value' */
+static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct at91_port_priv *port = dev_get_platdata(dev);
+
+ at91_set_port_output(port->regs, offset, value);
+
+ return 0;
+}
+
+/* read GPIO IN value of pin 'gpio' */
+static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+ struct at91_port_priv *port = dev_get_platdata(dev);
+
+ return at91_get_port_value(port->regs, offset);
+}
+
+/* write GPIO OUT value to pin 'gpio' */
+static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct at91_port_priv *port = dev_get_platdata(dev);
+
+ at91_set_port_value(port->regs, offset, value);
+
+ return 0;
+}
+
+static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+ struct at91_port_priv *port = dev_get_platdata(dev);
+
+ /* GPIOF_FUNC is not implemented yet */
+ if (at91_get_port_output(port->regs, offset))
+ return GPIOF_OUTPUT;
+ else
+ return GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops gpio_at91_ops = {
+ .direction_input = at91_gpio_direction_input,
+ .direction_output = at91_gpio_direction_output,
+ .get_value = at91_gpio_get_value,
+ .set_value = at91_gpio_set_value,
+ .get_function = at91_gpio_get_function,
+};
+
+static int at91_gpio_probe(struct udevice *dev)
+{
+ struct at91_port_priv *port = dev_get_priv(dev);
+ struct at91_port_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+ uc_priv->bank_name = plat->bank_name;
+ uc_priv->gpio_count = GPIO_PER_BANK;
+ port->regs = (struct at91_port *)plat->base_addr;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(gpio_at91) = {
+ .name = "gpio_at91",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_at91_ops,
+ .probe = at91_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct at91_port_priv),
+};
+#endif
return 0;
}
+/*
+ * get a number comprised of multiple GPIO values. gpio_num_array points to
+ * the array of gpio pin numbers to scan, terminated by -1.
+ */
+unsigned gpio_get_values_as_int(const int *gpio_num_array)
+{
+ int gpio;
+ unsigned bitmask = 1;
+ unsigned vector = 0;
+
+ while (bitmask &&
+ ((gpio = *gpio_num_array++) != -1)) {
+ if (gpio_get_value(gpio))
+ vector |= bitmask;
+ bitmask <<= 1;
+ }
+ return vector;
+}
+
/* We need to renumber the GPIOs when any driver is probed/removed */
static int gpio_renumber(struct udevice *removed_dev)
{
#include <pci.h>
#include <asm/gpio.h>
#include <asm/io.h>
+#include <asm/pci.h>
+#ifdef CONFIG_X86_RESET_VECTOR
+#include <asm/arch/pch.h>
+#define SUPPORT_GPIO_SETUP
+#endif
#define GPIO_PER_BANK 32
uint32_t lvl;
};
+#ifdef SUPPORT_GPIO_SETUP
+static void setup_pch_gpios(const struct pch_gpio_map *gpio)
+{
+ u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
+
+ /* GPIO Set 1 */
+ if (gpio->set1.level)
+ outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
+ if (gpio->set1.mode)
+ outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+ if (gpio->set1.direction)
+ outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
+ if (gpio->set1.reset)
+ outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+ if (gpio->set1.invert)
+ outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
+ if (gpio->set1.blink)
+ outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
+
+ /* GPIO Set 2 */
+ if (gpio->set2.level)
+ outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
+ if (gpio->set2.mode)
+ outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+ if (gpio->set2.direction)
+ outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+ if (gpio->set2.reset)
+ outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+
+ /* GPIO Set 3 */
+ if (gpio->set3.level)
+ outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
+ if (gpio->set3.mode)
+ outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+ if (gpio->set3.direction)
+ outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+ if (gpio->set3.reset)
+ outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+}
+
+/* TODO: Move this to device tree, or platform data */
+void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
+{
+ gd->arch.gpio_map = map;
+}
+#endif /* SUPPORT_GPIO_SETUP */
+
static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
pci_dev = PCI_BDF(0, 0x1f, 0);
/* Is the device present? */
- pci_read_config_word(pci_dev, PCI_VENDOR_ID, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_VENDOR_ID);
if (tmpword != PCI_VENDOR_ID_INTEL) {
debug("%s: wrong VendorID\n", __func__);
return -ENODEV;
}
- pci_read_config_word(pci_dev, PCI_DEVICE_ID, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_DEVICE_ID);
debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
/*
* We'd like to validate the Device ID too, but pretty much any
*/
/* I/O should already be enabled (it's a RO bit). */
- pci_read_config_word(pci_dev, PCI_COMMAND, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_COMMAND);
if (!(tmpword & PCI_COMMAND_IO)) {
debug("%s: device IO not enabled\n", __func__);
return -ENODEV;
}
/* Header Type must be normal (bits 6-0 only; see spec.) */
- pci_read_config_byte(pci_dev, PCI_HEADER_TYPE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_HEADER_TYPE);
if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
debug("%s: invalid Header type\n", __func__);
return -ENODEV;
}
/* Base Class must be a bridge device */
- pci_read_config_byte(pci_dev, PCI_CLASS_CODE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_CODE);
if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
debug("%s: invalid class\n", __func__);
return -ENODEV;
}
/* Sub Class must be ISA */
- pci_read_config_byte(pci_dev, PCI_CLASS_SUB_CODE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_SUB_CODE);
if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
debug("%s: invalid subclass\n", __func__);
return -ENODEV;
}
/* Programming Interface must be 0x00 (no others exist) */
- pci_read_config_byte(pci_dev, PCI_CLASS_PROG, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_PROG);
if (tmpbyte != 0x00) {
debug("%s: invalid interface type\n", __func__);
return -ENODEV;
* that it was unused (or undocumented). Check that it looks
* okay: not all ones or zeros, and mapped to I/O space (bit 0).
*/
- pci_read_config_dword(pci_dev, PCI_CFG_GPIOBASE, &tmplong);
+ tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
!(tmplong & 0x00000001)) {
debug("%s: unexpected GPIOBASE value\n", __func__);
return 0;
}
-int ich6_gpio_probe(struct udevice *dev)
+static int ich6_gpio_probe(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
struct gpio_dev_priv *uc_priv = dev->uclass_priv;
struct ich6_bank_priv *bank = dev_get_priv(dev);
+#ifdef SUPPORT_GPIO_SETUP
+ if (gd->arch.gpio_map) {
+ setup_pch_gpios(gd->arch.gpio_map);
+ gd->arch.gpio_map = NULL;
+ }
+#endif
uc_priv->gpio_count = GPIO_PER_BANK;
uc_priv->bank_name = plat->bank_name;
bank->use_sel = plat->base_addr;
return 0;
}
-int ich6_gpio_request(struct udevice *dev, unsigned offset, const char *label)
+static int ich6_gpio_request(struct udevice *dev, unsigned offset,
+ const char *label)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
+obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
--- /dev/null
+/*
+ * i2c.c - driver for ADI TWI/I2C
+ *
+ * Copyright (c) 2006-2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/clock.h>
+#include <asm/twi.h>
+#include <asm/io.h>
+
+static struct twi_regs *i2c_get_base(struct i2c_adapter *adap);
+
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+struct twi_regs {
+ ureg(clkdiv);
+ ureg(control);
+ ureg(slave_ctl);
+ ureg(slave_stat);
+ ureg(slave_addr);
+ ureg(master_ctl);
+ ureg(master_stat);
+ ureg(master_addr);
+ ureg(int_stat);
+ ureg(int_mask);
+ ureg(fifo_ctl);
+ ureg(fifo_stat);
+ char __pad[0x50];
+ ureg(xmt_data8);
+ ureg(xmt_data16);
+ ureg(rcv_data8);
+ ureg(rcv_data16);
+};
+#undef ureg
+
+#ifdef TWI_CLKDIV
+#define TWI0_CLKDIV TWI_CLKDIV
+# ifdef CONFIG_SYS_MAX_I2C_BUS
+# undef CONFIG_SYS_MAX_I2C_BUS
+# endif
+#define CONFIG_SYS_MAX_I2C_BUS 1
+#endif
+
+/*
+ * The way speed is changed into duty often results in integer truncation
+ * with 50% duty, so we'll force rounding up to the next duty by adding 1
+ * to the max. In practice this will get us a speed of something like
+ * 385 KHz. The other limit is easy to handle as it is only 8 bits.
+ */
+#define I2C_SPEED_MAX 400000
+#define I2C_SPEED_TO_DUTY(speed) (5000000 / (speed))
+#define I2C_DUTY_MAX (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
+#define I2C_DUTY_MIN 0xff /* 8 bit limited */
+#define SYS_I2C_DUTY I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
+/* Note: duty is inverse of speed, so the comparisons below are correct */
+#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
+# error "The I2C hardware can only operate 20KHz - 400KHz"
+#endif
+
+/* All transfers are described by this data structure */
+struct i2c_msg {
+ u8 flags;
+#define I2C_M_COMBO 0x4
+#define I2C_M_STOP 0x2
+#define I2C_M_READ 0x1
+ int len; /* msg length */
+ u8 *buf; /* pointer to msg data */
+ int alen; /* addr length */
+ u8 *abuf; /* addr buffer */
+};
+
+/* Allow msec timeout per ~byte transfer */
+#define I2C_TIMEOUT 10
+
+/**
+ * wait_for_completion - manage the actual i2c transfer
+ * @msg: the i2c msg
+ */
+static int wait_for_completion(struct twi_regs *twi, struct i2c_msg *msg)
+{
+ u16 int_stat, ctl;
+ ulong timebase = get_timer(0);
+
+ do {
+ int_stat = readw(&twi->int_stat);
+
+ if (int_stat & XMTSERV) {
+ writew(XMTSERV, &twi->int_stat);
+ if (msg->alen) {
+ writew(*(msg->abuf++), &twi->xmt_data8);
+ --msg->alen;
+ } else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
+ writew(*(msg->buf++), &twi->xmt_data8);
+ --msg->len;
+ } else {
+ ctl = readw(&twi->master_ctl);
+ if (msg->flags & I2C_M_COMBO)
+ writew(ctl | RSTART | MDIR,
+ &twi->master_ctl);
+ else
+ writew(ctl | STOP, &twi->master_ctl);
+ }
+ }
+ if (int_stat & RCVSERV) {
+ writew(RCVSERV, &twi->int_stat);
+ if (msg->len) {
+ *(msg->buf++) = readw(&twi->rcv_data8);
+ --msg->len;
+ } else if (msg->flags & I2C_M_STOP) {
+ ctl = readw(&twi->master_ctl);
+ writew(ctl | STOP, &twi->master_ctl);
+ }
+ }
+ if (int_stat & MERR) {
+ writew(MERR, &twi->int_stat);
+ return msg->len;
+ }
+ if (int_stat & MCOMP) {
+ writew(MCOMP, &twi->int_stat);
+ if (msg->flags & I2C_M_COMBO && msg->len) {
+ ctl = readw(&twi->master_ctl);
+ ctl = (ctl & ~RSTART) |
+ (min(msg->len, 0xff) << 6) | MEN | MDIR;
+ writew(ctl, &twi->master_ctl);
+ } else
+ break;
+ }
+
+ /* If we were able to do something, reset timeout */
+ if (int_stat)
+ timebase = get_timer(0);
+
+ } while (get_timer(timebase) < I2C_TIMEOUT);
+
+ return msg->len;
+}
+
+static int i2c_transfer(struct i2c_adapter *adap, uint8_t chip, uint addr,
+ int alen, uint8_t *buffer, int len, uint8_t flags)
+{
+ struct twi_regs *twi = i2c_get_base(adap);
+ int ret;
+ u16 ctl;
+ uchar addr_buffer[] = {
+ (addr >> 0),
+ (addr >> 8),
+ (addr >> 16),
+ };
+ struct i2c_msg msg = {
+ .flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
+ .buf = buffer,
+ .len = len,
+ .abuf = addr_buffer,
+ .alen = alen,
+ };
+
+ /* wait for things to settle */
+ while (readw(&twi->master_stat) & BUSBUSY)
+ if (ctrlc())
+ return 1;
+
+ /* Set Transmit device address */
+ writew(chip, &twi->master_addr);
+
+ /* Clear the FIFO before starting things */
+ writew(XMTFLUSH | RCVFLUSH, &twi->fifo_ctl);
+ writew(0, &twi->fifo_ctl);
+
+ /* prime the pump */
+ if (msg.alen) {
+ len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
+ writew(*(msg.abuf++), &twi->xmt_data8);
+ --msg.alen;
+ } else if (!(msg.flags & I2C_M_READ) && msg.len) {
+ writew(*(msg.buf++), &twi->xmt_data8);
+ --msg.len;
+ }
+
+ /* clear int stat */
+ writew(-1, &twi->master_stat);
+ writew(-1, &twi->int_stat);
+ writew(0, &twi->int_mask);
+
+ /* Master enable */
+ ctl = readw(&twi->master_ctl);
+ ctl = (ctl & FAST) | (min(len, 0xff) << 6) | MEN |
+ ((msg.flags & I2C_M_READ) ? MDIR : 0);
+ writew(ctl, &twi->master_ctl);
+
+ /* process the rest */
+ ret = wait_for_completion(twi, &msg);
+
+ if (ret) {
+ ctl = readw(&twi->master_ctl) & ~MEN;
+ writew(ctl, &twi->master_ctl);
+ ctl = readw(&twi->control) & ~TWI_ENA;
+ writew(ctl, &twi->control);
+ ctl = readw(&twi->control) | TWI_ENA;
+ writew(ctl, &twi->control);
+ }
+
+ return ret;
+}
+
+static uint adi_i2c_setspeed(struct i2c_adapter *adap, uint speed)
+{
+ struct twi_regs *twi = i2c_get_base(adap);
+ u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
+
+ /* Set TWI interface clock */
+ if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
+ return -1;
+ clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
+ writew(clkdiv, &twi->clkdiv);
+
+ /* Don't turn it on */
+ writew(speed > 100000 ? FAST : 0, &twi->master_ctl);
+
+ return 0;
+}
+
+static void adi_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
+{
+ struct twi_regs *twi = i2c_get_base(adap);
+ u16 prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
+
+ /* Set TWI internal clock as 10MHz */
+ writew(prescale, &twi->control);
+
+ /* Set TWI interface clock as specified */
+ i2c_set_bus_speed(speed);
+
+ /* Enable it */
+ writew(TWI_ENA | prescale, &twi->control);
+}
+
+static int adi_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer, int len)
+{
+ return i2c_transfer(adap, chip, addr, alen, buffer,
+ len, alen ? I2C_M_COMBO : I2C_M_READ);
+}
+
+static int adi_i2c_write(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer, int len)
+{
+ return i2c_transfer(adap, chip, addr, alen, buffer, len, 0);
+}
+
+static int adi_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
+{
+ u8 byte;
+ return adi_i2c_read(adap, chip, 0, 0, &byte, 1);
+}
+
+static struct twi_regs *i2c_get_base(struct i2c_adapter *adap)
+{
+ switch (adap->hwadapnr) {
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+ case 2:
+ return (struct twi_regs *)TWI2_CLKDIV;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+ case 1:
+ return (struct twi_regs *)TWI1_CLKDIV;
+#endif
+ case 0:
+ return (struct twi_regs *)TWI0_CLKDIV;
+
+ default:
+ printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+ }
+
+ return NULL;
+}
+
+U_BOOT_I2C_ADAP_COMPLETE(adi_i2c0, adi_i2c_init, adi_i2c_probe,
+ adi_i2c_read, adi_i2c_write,
+ adi_i2c_setspeed,
+ CONFIG_SYS_I2C_SPEED,
+ 0,
+ 0)
+
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+U_BOOT_I2C_ADAP_COMPLETE(adi_i2c1, adi_i2c_init, adi_i2c_probe,
+ adi_i2c_read, adi_i2c_write,
+ adi_i2c_setspeed,
+ CONFIG_SYS_I2C_SPEED,
+ 0,
+ 1)
+#endif
+
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+U_BOOT_I2C_ADAP_COMPLETE(adi_i2c2, adi_i2c_init, adi_i2c_probe,
+ adi_i2c_read, adi_i2c_write,
+ adi_i2c_setspeed,
+ CONFIG_SYS_I2C_SPEED,
+ 0,
+ 2)
+#endif
+++ /dev/null
-/*
- * i2c.c - driver for Blackfin on-chip TWI/I2C
- *
- * Copyright (c) 2006-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#include <asm/blackfin.h>
-#include <asm/clock.h>
-#include <asm/mach-common/bits/twi.h>
-
-/* Every register is 32bit aligned, but only 16bits in size */
-#define ureg(name) u16 name; u16 __pad_##name;
-struct twi_regs {
- ureg(clkdiv);
- ureg(control);
- ureg(slave_ctl);
- ureg(slave_stat);
- ureg(slave_addr);
- ureg(master_ctl);
- ureg(master_stat);
- ureg(master_addr);
- ureg(int_stat);
- ureg(int_mask);
- ureg(fifo_ctl);
- ureg(fifo_stat);
- char __pad[0x50];
- ureg(xmt_data8);
- ureg(xmt_data16);
- ureg(rcv_data8);
- ureg(rcv_data16);
-};
-#undef ureg
-
-/* U-Boot I2C framework allows only one active device at a time. */
-#ifdef TWI_CLKDIV
-#define TWI0_CLKDIV TWI_CLKDIV
-#endif
-static volatile struct twi_regs *twi = (void *)TWI0_CLKDIV;
-
-#ifdef DEBUG
-# define dmemset(s, c, n) memset(s, c, n)
-#else
-# define dmemset(s, c, n)
-#endif
-#define debugi(fmt, args...) \
- debug( \
- "MSTAT:0x%03x FSTAT:0x%x ISTAT:0x%02x\t%-20s:%-3i: " fmt "\n", \
- twi->master_stat, twi->fifo_stat, twi->int_stat, \
- __func__, __LINE__, ## args)
-
-#ifdef CONFIG_TWICLK_KHZ
-# error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED
-#endif
-
-/*
- * The way speed is changed into duty often results in integer truncation
- * with 50% duty, so we'll force rounding up to the next duty by adding 1
- * to the max. In practice this will get us a speed of something like
- * 385 KHz. The other limit is easy to handle as it is only 8 bits.
- */
-#define I2C_SPEED_MAX 400000
-#define I2C_SPEED_TO_DUTY(speed) (5000000 / (speed))
-#define I2C_DUTY_MAX (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
-#define I2C_DUTY_MIN 0xff /* 8 bit limited */
-#define SYS_I2C_DUTY I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
-/* Note: duty is inverse of speed, so the comparisons below are correct */
-#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
-# error "The Blackfin I2C hardware can only operate 20KHz - 400KHz"
-#endif
-
-/* All transfers are described by this data structure */
-struct i2c_msg {
- u8 flags;
-#define I2C_M_COMBO 0x4
-#define I2C_M_STOP 0x2
-#define I2C_M_READ 0x1
- int len; /* msg length */
- u8 *buf; /* pointer to msg data */
- int alen; /* addr length */
- u8 *abuf; /* addr buffer */
-};
-
-/* Allow msec timeout per ~byte transfer */
-#define I2C_TIMEOUT 10
-
-/**
- * wait_for_completion - manage the actual i2c transfer
- * @msg: the i2c msg
- */
-static int wait_for_completion(struct i2c_msg *msg)
-{
- uint16_t int_stat;
- ulong timebase = get_timer(0);
-
- do {
- int_stat = twi->int_stat;
-
- if (int_stat & XMTSERV) {
- debugi("processing XMTSERV");
- twi->int_stat = XMTSERV;
- SSYNC();
- if (msg->alen) {
- twi->xmt_data8 = *(msg->abuf++);
- --msg->alen;
- } else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
- twi->xmt_data8 = *(msg->buf++);
- --msg->len;
- } else {
- twi->master_ctl |= (msg->flags & I2C_M_COMBO) ? RSTART | MDIR : STOP;
- SSYNC();
- }
- }
- if (int_stat & RCVSERV) {
- debugi("processing RCVSERV");
- twi->int_stat = RCVSERV;
- SSYNC();
- if (msg->len) {
- *(msg->buf++) = twi->rcv_data8;
- --msg->len;
- } else if (msg->flags & I2C_M_STOP) {
- twi->master_ctl |= STOP;
- SSYNC();
- }
- }
- if (int_stat & MERR) {
- debugi("processing MERR");
- twi->int_stat = MERR;
- SSYNC();
- return msg->len;
- }
- if (int_stat & MCOMP) {
- debugi("processing MCOMP");
- twi->int_stat = MCOMP;
- SSYNC();
- if (msg->flags & I2C_M_COMBO && msg->len) {
- twi->master_ctl = (twi->master_ctl & ~RSTART) |
- (min(msg->len, 0xff) << 6) | MEN | MDIR;
- SSYNC();
- } else
- break;
- }
-
- /* If we were able to do something, reset timeout */
- if (int_stat)
- timebase = get_timer(0);
-
- } while (get_timer(timebase) < I2C_TIMEOUT);
-
- return msg->len;
-}
-
-/**
- * i2c_transfer - setup an i2c transfer
- * @return: 0 if things worked, non-0 if things failed
- *
- * Here we just get the i2c stuff all prepped and ready, and then tail off
- * into wait_for_completion() for all the bits to go.
- */
-static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len, u8 flags)
-{
- uchar addr_buffer[] = {
- (addr >> 0),
- (addr >> 8),
- (addr >> 16),
- };
- struct i2c_msg msg = {
- .flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
- .buf = buffer,
- .len = len,
- .abuf = addr_buffer,
- .alen = alen,
- };
- int ret;
-
- dmemset(buffer, 0xff, len);
- debugi("chip=0x%x addr=0x%02x alen=%i buf[0]=0x%02x len=%i flags=0x%02x[%s] ",
- chip, addr, alen, buffer[0], len, flags, (flags & I2C_M_READ ? "rd" : "wr"));
-
- /* wait for things to settle */
- while (twi->master_stat & BUSBUSY)
- if (ctrlc())
- return 1;
-
- /* Set Transmit device address */
- twi->master_addr = chip;
-
- /* Clear the FIFO before starting things */
- twi->fifo_ctl = XMTFLUSH | RCVFLUSH;
- SSYNC();
- twi->fifo_ctl = 0;
- SSYNC();
-
- /* prime the pump */
- if (msg.alen) {
- len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
- debugi("first byte=0x%02x", *msg.abuf);
- twi->xmt_data8 = *(msg.abuf++);
- --msg.alen;
- } else if (!(msg.flags & I2C_M_READ) && msg.len) {
- debugi("first byte=0x%02x", *msg.buf);
- twi->xmt_data8 = *(msg.buf++);
- --msg.len;
- }
-
- /* clear int stat */
- twi->master_stat = -1;
- twi->int_stat = -1;
- twi->int_mask = 0;
- SSYNC();
-
- /* Master enable */
- twi->master_ctl =
- (twi->master_ctl & FAST) |
- (min(len, 0xff) << 6) | MEN |
- ((msg.flags & I2C_M_READ) ? MDIR : 0);
- SSYNC();
- debugi("CTL=0x%04x", twi->master_ctl);
-
- /* process the rest */
- ret = wait_for_completion(&msg);
- debugi("ret=%d", ret);
-
- if (ret) {
- twi->master_ctl &= ~MEN;
- twi->control &= ~TWI_ENA;
- SSYNC();
- twi->control |= TWI_ENA;
- SSYNC();
- }
-
- return ret;
-}
-
-/**
- * i2c_set_bus_speed - set i2c bus speed
- * @speed: bus speed (in HZ)
- */
-int i2c_set_bus_speed(unsigned int speed)
-{
- u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
-
- /* Set TWI interface clock */
- if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
- return -1;
- twi->clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
-
- /* Don't turn it on */
- twi->master_ctl = (speed > 100000 ? FAST : 0);
-
- return 0;
-}
-
-/**
- * i2c_get_bus_speed - get i2c bus speed
- * @speed: bus speed (in HZ)
- */
-unsigned int i2c_get_bus_speed(void)
-{
- /* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
- return 5000000 / (twi->clkdiv & 0xff);
-}
-
-/**
- * i2c_init - initialize the i2c bus
- * @speed: bus speed (in HZ)
- * @slaveaddr: address of device in slave mode (0 - not slave)
- *
- * Slave mode isn't actually implemented. It'll stay that way until
- * we get a real request for it.
- */
-void i2c_init(int speed, int slaveaddr)
-{
- uint8_t prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
-
- /* Set TWI internal clock as 10MHz */
- twi->control = prescale;
-
- /* Set TWI interface clock as specified */
- i2c_set_bus_speed(speed);
-
- /* Enable it */
- twi->control = TWI_ENA | prescale;
- SSYNC();
-
- debugi("CONTROL:0x%04x CLKDIV:0x%04x", twi->control, twi->clkdiv);
-
-#if CONFIG_SYS_I2C_SLAVE
-# error I2C slave support not tested/supported
- /* If they want us as a slave, do it */
- if (slaveaddr) {
- twi->slave_addr = slaveaddr;
- twi->slave_ctl = SEN;
- }
-#endif
-}
-
-/**
- * i2c_probe - test if a chip exists at a given i2c address
- * @chip: i2c chip addr to search for
- * @return: 0 if found, non-0 if not found
- */
-int i2c_probe(uchar chip)
-{
- u8 byte;
- return i2c_read(chip, 0, 0, &byte, 1);
-}
-
-/**
- * i2c_read - read data from an i2c device
- * @chip: i2c chip addr
- * @addr: memory (register) address in the chip
- * @alen: byte size of address
- * @buffer: buffer to store data read from chip
- * @len: how many bytes to read
- * @return: 0 on success, non-0 on failure
- */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- return i2c_transfer(chip, addr, alen, buffer, len, (alen ? I2C_M_COMBO : I2C_M_READ));
-}
-
-/**
- * i2c_write - write data to an i2c device
- * @chip: i2c chip addr
- * @addr: memory (register) address in the chip
- * @alen: byte size of address
- * @buffer: buffer holding data to write to chip
- * @len: how many bytes to write
- * @return: 0 on success, non-0 on failure
- */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- return i2c_transfer(chip, addr, alen, buffer, len, 0);
-}
-
-/**
- * i2c_set_bus_num - change active I2C bus
- * @bus: bus index, zero based
- * @returns: 0 on success, non-0 on failure
- */
-int i2c_set_bus_num(unsigned int bus)
-{
- switch (bus) {
-#if CONFIG_SYS_MAX_I2C_BUS > 0
- case 0: twi = (void *)TWI0_CLKDIV; return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 1
- case 1: twi = (void *)TWI1_CLKDIV; return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 2
- case 2: twi = (void *)TWI2_CLKDIV; return 0;
-#endif
- default: return -1;
- }
-}
-
-/**
- * i2c_get_bus_num - returns index of active I2C bus
- */
-unsigned int i2c_get_bus_num(void)
-{
- switch ((unsigned long)twi) {
-#if CONFIG_SYS_MAX_I2C_BUS > 0
- case TWI0_CLKDIV: return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 1
- case TWI1_CLKDIV: return 1;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 2
- case TWI2_CLKDIV: return 2;
-#endif
- default: return -1;
- }
-}
static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
unsigned int i2c_clk, unsigned int speed)
{
- unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
+ unsigned short divider = min(i2c_clk / speed, (unsigned int)USHRT_MAX);
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
/* Try sending a version 3 packet */
dev->protocol_version = 3;
+ req.in_data = 0;
if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
(uint8_t **)&resp, sizeof(*resp)) > 0) {
return 0;
return -1;
}
- len = min(p[1], din_len);
+ len = min((int)p[1], din_len);
cros_ec_dump_data("in", -1, p, len + 3);
/* Response code is first byte of message */
relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
1000000000) + 2 * (relax + 1) - 1;
- strobe_prog = DIV_ROUND(ipg_clk * BV_TIMING_STROBE_PROG_US, 1000000) +
- 2 * (relax + 1) - 1;
+ strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
+ 1000000) + 2 * (relax + 1) - 1;
timing = BF(strobe_read, TIMING_STROBE_READ) |
BF(relax, TIMING_RELAX) |
DECLARE_GLOBAL_DATA_PTR;
+#define SDHCI_IRQ_EN_BITS (IRQSTATEN_CC | IRQSTATEN_TC | \
+ IRQSTATEN_CINT | \
+ IRQSTATEN_CTOE | IRQSTATEN_CCE | IRQSTATEN_CEBE | \
+ IRQSTATEN_CIE | IRQSTATEN_DTOE | IRQSTATEN_DCE | \
+ IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR | \
+ IRQSTATEN_DINT)
+
struct fsl_esdhc {
uint dsaddr; /* SDMA system address register */
uint blkattr; /* Block attributes register */
esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
| SYSCTL_IPGEN | SYSCTL_CKEN);
+ writel(SDHCI_IRQ_EN_BITS, ®s->irqstaten);
memset(&cfg->cfg, 0, sizeof(cfg->cfg));
voltage_caps = 0;
#endif
cfg->cfg.f_min = 400000;
- cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000);
+ cfg->cfg.f_max = min(gd->arch.sdhc_clk, (u32)52000000);
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
while (len) {
/* The controller has data ready */
if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) {
- size = min(len, PXAMMC_FIFO_SIZE);
+ size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
len -= size;
size /= 4;
while (len) {
/* The controller is ready to receive data */
if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) {
- size = min(len, PXAMMC_FIFO_SIZE);
+ size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
len -= size;
size /= 4;
while (size--)
writel(*buf++, ®s->txfifo);
- if (min(len, PXAMMC_FIFO_SIZE) < 32)
+ if (min(len, (uint32_t)PXAMMC_FIFO_SIZE) < 32)
writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf);
}
mtd->flags = MTD_CAP_NORFLASH;
mtd->size = fi->size;
mtd->writesize = 1;
+ mtd->writebufsize = mtd->writesize;
mtd->_erase = cfi_mtd_erase;
mtd->_read = cfi_mtd_read;
ERASEINFO(0x10000, 15),
}
},
+ {
+ .mfr_id = (u16)AMD_MANUFACT,
+ .dev_id = AM29LV800BT,
+ .name = "AMD AM29LV800BT",
+ .uaddr = {
+ [1] = MTD_UADDR_0x0555_0x02AA /* x16 */
+ },
+ .DevSize = SIZE_1MiB,
+ .CmdSet = CFI_CMDSET_AMD_LEGACY,
+ .NumEraseRegions= 4,
+ .regions = {
+ ERASEINFO(0x10000, 15),
+ ERASEINFO(0x08000, 1),
+ ERASEINFO(0x02000, 2),
+ ERASEINFO(0x04000, 1),
+ }
+ },
+ {
+ .mfr_id = (u16)MX_MANUFACT,
+ .dev_id = AM29LV800BT,
+ .name = "MXIC MX29LV800BT",
+ .uaddr = {
+ [1] = MTD_UADDR_0x0555_0x02AA /* x16 */
+ },
+ .DevSize = SIZE_1MiB,
+ .CmdSet = CFI_CMDSET_AMD_LEGACY,
+ .NumEraseRegions= 4,
+ .regions = {
+ ERASEINFO(0x10000, 15),
+ ERASEINFO(0x08000, 1),
+ ERASEINFO(0x02000, 2),
+ ERASEINFO(0x04000, 1),
+ }
+ },
+ {
+ .mfr_id = (u16)EON_ALT_MANU,
+ .dev_id = AM29LV800BT,
+ .name = "EON EN29LV800BT",
+ .uaddr = {
+ [1] = MTD_UADDR_0x0555_0x02AA /* x16 */
+ },
+ .DevSize = SIZE_1MiB,
+ .CmdSet = CFI_CMDSET_AMD_LEGACY,
+ .NumEraseRegions= 4,
+ .regions = {
+ ERASEINFO(0x10000, 15),
+ ERASEINFO(0x08000, 1),
+ ERASEINFO(0x02000, 2),
+ ERASEINFO(0x04000, 1),
+ }
+ },
{
.mfr_id = (u16)STM_MANUFACT,
.dev_id = STM29F400BB,
#include <malloc.h>
#include <nand.h>
#include <watchdog.h>
+#include <linux/mtd/nand_ecc.h>
#ifdef CONFIG_ATMEL_NAND_HWECC
}
#endif
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+static uint16_t *pmecc_galois_table;
+static inline int deg(unsigned int poly)
+{
+ /* polynomial degree is the most-significant bit index */
+ return fls(poly) - 1;
+}
+
+static int build_gf_tables(int mm, unsigned int poly,
+ int16_t *index_of, int16_t *alpha_to)
+{
+ unsigned int i, x = 1;
+ const unsigned int k = 1 << deg(poly);
+ unsigned int nn = (1 << mm) - 1;
+
+ /* primitive polynomial must be of degree m */
+ if (k != (1u << mm))
+ return -EINVAL;
+
+ for (i = 0; i < nn; i++) {
+ alpha_to[i] = x;
+ index_of[x] = i;
+ if (i && (x == 1))
+ /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
+ return -EINVAL;
+ x <<= 1;
+ if (x & k)
+ x ^= poly;
+ }
+
+ alpha_to[nn] = 1;
+ index_of[0] = 0;
+
+ return 0;
+}
+
+static uint16_t *create_lookup_table(int sector_size)
+{
+ int degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 :
+ PMECC_GF_DIMENSION_14;
+ unsigned int poly = (sector_size == 512) ?
+ PMECC_GF_13_PRIMITIVE_POLY :
+ PMECC_GF_14_PRIMITIVE_POLY;
+ int table_size = (sector_size == 512) ?
+ PMECC_INDEX_TABLE_SIZE_512 :
+ PMECC_INDEX_TABLE_SIZE_1024;
+
+ int16_t *addr = kzalloc(2 * table_size * sizeof(uint16_t), GFP_KERNEL);
+ if (addr && build_gf_tables(degree, poly, addr, addr + table_size))
+ return NULL;
+
+ return (uint16_t *)addr;
+}
+#endif
+
static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
struct mtd_info *mtd)
{
sector_size = host->pmecc_sector_size;
/* TODO: need check whether cap & sector_size is validate */
-
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+ /*
+ * As pmecc_rom_base is the begin of the gallois field table, So the
+ * index offset just set as 0.
+ */
+ host->pmecc_index_table_offset = 0;
+#else
if (host->pmecc_sector_size == 512)
host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512;
else
host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024;
+#endif
MTDDEBUG(MTD_DEBUG_LEVEL1,
"Initialize PMECC params, cap: %d, sector: %d\n",
host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
host->pmerrloc = (struct pmecc_errloc_regs __iomem *)
ATMEL_BASE_PMERRLOC;
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+ pmecc_galois_table = create_lookup_table(host->pmecc_sector_size);
+ if (!pmecc_galois_table) {
+ dev_err(host->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+
+ host->pmecc_rom_base = (void __iomem *)pmecc_galois_table;
+#else
host->pmecc_rom_base = (void __iomem *) ATMEL_BASE_ROM;
+#endif
/* ECC is calculated for the whole page (1 step) */
nand->ecc.size = mtd->writesize;
void (*hwctrl)(struct mtd_info *mtd, int cmd,
unsigned int ctrl) = this->cmd_ctrl;
- while (this->dev_ready(&mtd))
+ while (!this->dev_ready(&mtd))
;
if (cmd == NAND_CMD_READOOB) {
hwctrl(&mtd, NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (this->dev_ready(&mtd))
+ while (!this->dev_ready(&mtd))
;
return 0;
return 0;
}
+
+int spl_nand_erase_one(int block, int page)
+{
+ struct nand_chip *this = mtd.priv;
+ void (*hwctrl)(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl) = this->cmd_ctrl;
+ int page_addr;
+
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, 0);
+
+ page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+ hwctrl(&mtd, NAND_CMD_ERASE1, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Row address */
+ hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+#endif
+
+ hwctrl(&mtd, NAND_CMD_ERASE2, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ udelay(2000);
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ nand_deselect();
+
+ return 0;
+}
#else
static int nand_read_page(int block, int page, void *dst)
{
udelay(this->chip_delay);
- return 0;
+ return 1;
}
int board_nand_init(struct nand_chip *nand)
#define PMECC_GF_DIMENSION_13 13
#define PMECC_GF_DIMENSION_14 14
+/* Primitive Polynomial used by PMECC */
+#define PMECC_GF_13_PRIMITIVE_POLY 0x201b
+#define PMECC_GF_14_PRIMITIVE_POLY 0x4443
+
#define PMECC_INDEX_TABLE_SIZE_512 0x2000
#define PMECC_INDEX_TABLE_SIZE_1024 0x4000
if (ret < 0)
return ret;
- readlen = min(page_size - column, size);
+ readlen = min(page_size - column, (int)size);
memcpy(dst, page_buffer, readlen);
column = 0;
int ret;
while (size > 0) {
- todo = min(size, sizeof(sandbox_sf_0xff));
+ todo = min(size, (int)sizeof(sandbox_sf_0xff));
ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
if (ret != todo)
return ret;
spec, ret);
return ret;
}
- ret = device_find_child_by_seq(bus, cs, true, &slave);
+ ret = spi_find_chip_select(bus, cs, &slave);
if (!ret) {
printf("Chip select %d already exists for spec '%s'\n", cs,
spec);
return -EEXIST;
}
- ret = spi_bind_device(bus, cs, "spi_flash_std", spec, &slave);
+ ret = device_bind_driver(bus, "spi_flash_std", spec, &slave);
if (ret)
return ret;
return ret;
#endif
byte_addr = offset % page_size;
- chunk_len = min(len - actual, page_size - byte_addr);
+ chunk_len = min(len - actual, (size_t)(page_size - byte_addr));
if (flash->spi->max_write_size)
- chunk_len = min(chunk_len, flash->spi->max_write_size);
+ chunk_len = min(chunk_len,
+ (size_t)flash->spi->max_write_size);
spi_flash_addr(write_addr, cmd);
return 1;
}
+static int macb_write_hwaddr(struct eth_device *dev);
static int macb_init(struct eth_device *netdev, bd_t *bd)
{
struct macb_device *macb = to_macb(netdev);
macb_writel(macb, TBQP, macb->tx_ring_dma);
if (macb_is_gem(macb)) {
-#ifdef CONFIG_RGMII
+ /*
+ * When the GMAC IP with GE feature, this bit is used to
+ * select interface between RGMII and GMII.
+ * When the GMAC IP without GE feature, this bit is used
+ * to select interface between RMII and MII.
+ */
+#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
gem_writel(macb, UR, GEM_BIT(RGMII));
#else
gem_writel(macb, UR, 0);
#endif /* CONFIG_RMII */
}
+ /* update the ethaddr */
+ if (is_valid_ether_addr(netdev->enetaddr)) {
+ macb_write_hwaddr(netdev);
+ } else {
+ printf("%s: mac address is not valid\n", netdev->name);
+ return -1;
+ }
+
if (!macb_phy_init(macb))
return -1;
len = strlen(s);
while (len) {
- int send_len = min(len, sizeof(input_buffer));
+ int send_len = min(len, (int)sizeof(input_buffer));
nc_send_packet(s, send_len);
len -= send_len;
s += send_len;
bdf < PCI_BDF(bus + 1, 0, 0);
#endif
bdf += PCI_BDF(0, 0, 1)) {
+ if (pci_skip_dev(hose, bdf))
+ continue;
+
if (!PCI_FUNC(bdf)) {
pci_read_config_byte(bdf,
PCI_HEADER_TYPE,
#endif
#ifdef CONFIG_PCI_PNP
- sub_bus = max(pciauto_config_device(hose, dev), sub_bus);
+ sub_bus = max((unsigned int)pciauto_config_device(hose, dev),
+ sub_bus);
#else
cfg = pci_find_config(hose, class, vendor, device,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
if (cfg) {
cfg->config_device(hose, dev, cfg);
- sub_bus = max(sub_bus, hose->current_busno);
+ sub_bus = max(sub_bus,
+ (unsigned int)hose->current_busno);
}
#endif
n = pci_hose_scan_bus(hose, hose->current_busno);
/* figure out the deepest we've gone for this leg */
- sub_bus = max(n, sub_bus);
+ sub_bus = max((unsigned int)n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <watchdog.h>
#include <serial.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#ifdef CONFIG_DM_SERIAL
+#include <asm/arch/atmel_serial.h>
+#endif
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
-static void atmel_serial_setbrg(void)
+static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id,
+ int baudrate)
{
- atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
unsigned long divisor;
unsigned long usart_hz;
* Baud Rate = --------------
* 16 * CD
*/
- usart_hz = get_usart_clk_rate(CONFIG_USART_ID);
- divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
+ usart_hz = get_usart_clk_rate(id);
+ divisor = (usart_hz / 16 + baudrate / 2) / baudrate;
writel(USART3_BF(CD, divisor), &usart->brgr);
}
-static int atmel_serial_init(void)
+static void atmel_serial_init_internal(atmel_usart3_t *usart)
{
- atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
-
/*
* Just in case: drain transmitter register
* 1000us is enough for baudrate >= 9600
__udelay(1000);
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
+}
- serial_setbrg();
-
+static void atmel_serial_activate(atmel_usart3_t *usart)
+{
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
| USART3_BF(USCLKS, USART3_USCLKS_MCK)
| USART3_BF(CHRL, USART3_CHRL_8)
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
/* 100us is enough for the new settings to be settled */
__udelay(100);
+}
+
+#ifndef CONFIG_DM_SERIAL
+static void atmel_serial_setbrg(void)
+{
+ atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE,
+ CONFIG_USART_ID, gd->baudrate);
+}
+
+static int atmel_serial_init(void)
+{
+ atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
+
+ atmel_serial_init_internal(usart);
+ serial_setbrg();
+ atmel_serial_activate(usart);
return 0;
}
{
return &atmel_serial_drv;
}
+#endif
+
+#ifdef CONFIG_DM_SERIAL
+
+struct atmel_serial_priv {
+ atmel_usart3_t *usart;
+};
+
+int atmel_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ atmel_serial_setbrg_internal(priv->usart, 0 /* ignored */, baudrate);
+ atmel_serial_activate(priv->usart);
+
+ return 0;
+}
+
+static int atmel_serial_getc(struct udevice *dev)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY)))
+ return -EAGAIN;
+
+ return readl(&priv->usart->rhr);
+}
+
+static int atmel_serial_putc(struct udevice *dev, const char ch)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY)))
+ return -EAGAIN;
+
+ writel(ch, &priv->usart->thr);
+
+ return 0;
+}
+
+static int atmel_serial_pending(struct udevice *dev, bool input)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+ uint32_t csr = readl(&priv->usart->csr);
+
+ if (input)
+ return csr & USART3_BIT(RXRDY) ? 1 : 0;
+ else
+ return csr & USART3_BIT(TXEMPTY) ? 0 : 1;
+}
+
+static const struct dm_serial_ops atmel_serial_ops = {
+ .putc = atmel_serial_putc,
+ .pending = atmel_serial_pending,
+ .getc = atmel_serial_getc,
+ .setbrg = atmel_serial_setbrg,
+};
+
+static int atmel_serial_probe(struct udevice *dev)
+{
+ struct atmel_serial_platdata *plat = dev->platdata;
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ priv->usart = (atmel_usart3_t *)plat->base_addr;
+ atmel_serial_init_internal(priv->usart);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(serial_atmel) = {
+ .name = "serial_atmel",
+ .id = UCLASS_SERIAL,
+ .probe = atmel_serial_probe,
+ .ops = &atmel_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct atmel_serial_priv),
+};
+#endif
#include <common.h>
#include <dm.h>
+#include <environment.h>
#include <errno.h>
#include <fdtdec.h>
#include <os.h>
DECLARE_GLOBAL_DATA_PTR;
-/* The currently-selected console serial device */
-struct udevice *cur_dev __attribute__ ((section(".data")));
+/*
+ * Table with supported baudrates (defined in config_xyz.h)
+ */
+static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
#ifndef CONFIG_SYS_MALLOC_F_LEN
#error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
static void serial_find_console_or_panic(void)
{
+ struct udevice *dev;
+
#ifdef CONFIG_OF_CONTROL
int node;
node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
if (node < 0)
node = fdtdec_get_alias_node(gd->fdt_blob, "console");
- if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &cur_dev))
+ if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) {
+ gd->cur_serial_dev = dev;
return;
+ }
/*
* If the console is not marked to be bound before relocation, bind
* it anyway.
*/
if (node > 0 &&
- !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &cur_dev)) {
- if (!device_probe(cur_dev))
+ !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &dev)) {
+ if (!device_probe(dev)) {
+ gd->cur_serial_dev = dev;
return;
- cur_dev = NULL;
+ }
}
#endif
/*
#else
#define INDEX 0
#endif
- if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &cur_dev) &&
- uclass_get_device(UCLASS_SERIAL, INDEX, &cur_dev) &&
- (uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev))
+ if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
+ uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
+ (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
panic("No serial driver found");
#undef INDEX
+ gd->cur_serial_dev = dev;
}
/* Called prior to relocation */
void serial_putc(char ch)
{
- _serial_putc(cur_dev, ch);
+ _serial_putc(gd->cur_serial_dev, ch);
}
void serial_puts(const char *str)
{
- _serial_puts(cur_dev, str);
+ _serial_puts(gd->cur_serial_dev, str);
}
int serial_getc(void)
{
- return _serial_getc(cur_dev);
+ return _serial_getc(gd->cur_serial_dev);
}
int serial_tstc(void)
{
- return _serial_tstc(cur_dev);
+ return _serial_tstc(gd->cur_serial_dev);
}
void serial_setbrg(void)
{
- struct dm_serial_ops *ops = serial_get_ops(cur_dev);
+ struct dm_serial_ops *ops = serial_get_ops(gd->cur_serial_dev);
if (ops->setbrg)
- ops->setbrg(cur_dev, gd->baudrate);
+ ops->setbrg(gd->cur_serial_dev, gd->baudrate);
}
void serial_stdio_init(void)
{
}
+#ifdef CONFIG_DM_STDIO
static void serial_stub_putc(struct stdio_dev *sdev, const char ch)
{
_serial_putc(sdev->priv, ch);
}
+#endif
void serial_stub_puts(struct stdio_dev *sdev, const char *str)
{
return _serial_tstc(sdev->priv);
}
+/**
+ * on_baudrate() - Update the actual baudrate when the env var changes
+ *
+ * This will check for a valid baudrate and only apply it if valid.
+ */
+static int on_baudrate(const char *name, const char *value, enum env_op op,
+ int flags)
+{
+ int i;
+ int baudrate;
+
+ switch (op) {
+ case env_op_create:
+ case env_op_overwrite:
+ /*
+ * Switch to new baudrate if new baudrate is supported
+ */
+ baudrate = simple_strtoul(value, NULL, 10);
+
+ /* Not actually changing */
+ if (gd->baudrate == baudrate)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+ if (baudrate == baudrate_table[i])
+ break;
+ }
+ if (i == ARRAY_SIZE(baudrate_table)) {
+ if ((flags & H_FORCE) == 0)
+ printf("## Baudrate %d bps not supported\n",
+ baudrate);
+ return 1;
+ }
+ if ((flags & H_INTERACTIVE) != 0) {
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
+ baudrate);
+ udelay(50000);
+ }
+
+ gd->baudrate = baudrate;
+
+ serial_setbrg();
+
+ udelay(50000);
+
+ if ((flags & H_INTERACTIVE) != 0)
+ while (1) {
+ if (getc() == '\r')
+ break;
+ }
+
+ return 0;
+ case env_op_delete:
+ printf("## Baudrate may not be deleted\n");
+ return 1;
+ default:
+ return 0;
+ }
+}
+U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
+
static int serial_post_probe(struct udevice *dev)
{
- struct stdio_dev sdev;
struct dm_serial_ops *ops = serial_get_ops(dev);
+#ifdef CONFIG_DM_STDIO
struct serial_dev_priv *upriv = dev->uclass_priv;
+ struct stdio_dev sdev;
+#endif
int ret;
/* Set the baud rate */
return ret;
}
+#ifdef CONFIG_DM_STDIO
if (!(gd->flags & GD_FLG_RELOC))
return 0;
-
memset(&sdev, '\0', sizeof(sdev));
strncpy(sdev.name, dev->name, sizeof(sdev.name));
sdev.getc = serial_stub_getc;
sdev.tstc = serial_stub_tstc;
stdio_register_dev(&sdev, &upriv->sdev);
-
+#endif
return 0;
}
SCI_OUT(sci_size, sci_offset, value);\
}
-#if defined(CONFIG_SH3) || \
+#if defined(CONFIG_CPU_SH3) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372) || \
#include <ns16550.h>
#include <serial.h>
+#ifdef CONFIG_OF_CONTROL
static const struct udevice_id tegra_serial_ids[] = {
{ .compatible = "nvidia,tegra20-uart" },
{ }
return 0;
}
+#else
+struct ns16550_platdata tegra_serial = {
+ .base = CONFIG_SYS_NS16550_COM1,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK,
+};
+
+U_BOOT_DEVICE(ns16550_serial) = {
+ "serial_tegra20", &tegra_serial
+};
+#endif
+
U_BOOT_DRIVER(serial_ns16550) = {
.name = "serial_tegra20",
.id = UCLASS_SERIAL,
+#ifdef CONFIG_OF_CONTROL
.of_match = tegra_serial_ids,
.ofdata_to_platdata = tegra_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+#endif
.priv_auto_alloc_size = sizeof(struct NS16550),
.probe = ns16550_serial_probe,
.ops = &ns16550_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
};
space_avail =
current_urb->buffer_length -
current_urb->actual_length;
- popnum = min(space_avail, buf->size);
+ popnum = min(space_avail, (int)buf->size);
if (popnum == 0)
break;
readl(as->regs + ATMEL_SPI_##reg)
#define spi_writel(as, reg, value) \
writel(value, as->regs + ATMEL_SPI_##reg)
+
+#if !defined(CONFIG_SYS_SPI_WRITE_TOUT)
+#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
+#endif
spi_cs_deactivate(slave);
return 0;
}
- buf_len = 2 * cmd_len + min(data_len, max_tran_len);
+ buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len);
len = cmd_len + data_len;
rx_offset = cmd_len;
buffer = (unsigned char *)malloc(buf_len);
if (data_in)
din = buffer + rx_offset;
dout = buffer;
- tran_len = min(data_len , max_tran_len);
+ tran_len = min(data_len, (size_t)max_tran_len);
num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
num_bytes = (tran_len + cmd_len) % 4;
fsl->data_len = tran_len + cmd_len;
tmp = reg_read(®s->rxdata);
data = cpu_to_be32(tmp);
debug("SPI Rx: 0x%x 0x%x\n", tmp, data);
- cnt = min(nbytes, sizeof(data));
+ cnt = min_t(u32, nbytes, sizeof(data));
if (din) {
memcpy(din, &data, cnt);
din += cnt;
speed = slave->max_hz;
if (spi->max_hz) {
if (speed)
- speed = min(speed, spi->max_hz);
+ speed = min(speed, (int)spi->max_hz);
else
speed = spi->max_hz;
}
return slave ? slave->cs : -ENOENT;
}
-/**
- * spi_find_chip_select() - Find the slave attached to chip select
- *
- * @bus: SPI bus to search
- * @cs: Chip select to look for
- * @devp: Returns the slave device if found
- * @return 0 if found, -ENODEV on error
- */
-static int spi_find_chip_select(struct udevice *bus, int cs,
- struct udevice **devp)
+int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp)
{
struct udevice *dev;
return -ENODEV;
}
-int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
- const char *dev_name, struct udevice **devp)
-{
- struct driver *drv;
- int ret;
-
- drv = lists_driver_lookup_name(drv_name);
- if (!drv) {
- printf("Cannot find driver '%s'\n", drv_name);
- return -ENOENT;
- }
- ret = device_bind(bus, drv, dev_name, NULL, -1, devp);
- if (ret) {
- printf("Cannot create device named '%s' (err=%d)\n",
- dev_name, ret);
- return ret;
- }
-
- return 0;
-}
-
int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
struct udevice **devp)
{
if (ret == -ENODEV && drv_name) {
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
- ret = spi_bind_device(bus, cs, drv_name, dev_name, &dev);
+ ret = device_bind_driver(bus, drv_name, dev_name, &dev);
if (ret)
return ret;
created = true;
--- /dev/null
+#
+# (C) Copyright 2014 Freescale Semiconductor, Inc.
+# Author: Nitin Garg <nitin.garg@freescale.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o
+obj-$(CONFIG_IMX6_THERMAL) += imx_thermal.o
--- /dev/null
+/*
+ * (C) Copyright 2014 Freescale Semiconductor, Inc.
+ * Author: Nitin Garg <nitin.garg@freescale.com>
+ * Ye Li <Ye.Li@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <div64.h>
+#include <fuse.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <thermal.h>
+#include <imx_thermal.h>
+
+#define TEMPERATURE_MIN -40
+#define TEMPERATURE_HOT 80
+#define TEMPERATURE_MAX 125
+#define FACTOR0 10000000
+#define FACTOR1 15976
+#define FACTOR2 4297157
+#define MEASURE_FREQ 327
+
+#define TEMPSENSE0_TEMP_CNT_SHIFT 8
+#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
+#define TEMPSENSE0_FINISHED (1 << 2)
+#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
+#define TEMPSENSE0_POWER_DOWN (1 << 0)
+#define MISC0_REFTOP_SELBIASOFF (1 << 3)
+#define TEMPSENSE1_MEASURE_FREQ 0xffff
+
+static int read_cpu_temperature(struct udevice *dev)
+{
+ int temperature;
+ unsigned int reg, n_meas;
+ const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
+ struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs;
+ unsigned int *priv = dev_get_priv(dev);
+ u32 fuse = *priv;
+ int t1, n1;
+ u32 c1, c2;
+ u64 temp64;
+
+ /*
+ * Sensor data layout:
+ * [31:20] - sensor value @ 25C
+ * We use universal formula now and only need sensor value @ 25C
+ * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ */
+ n1 = fuse >> 20;
+ t1 = 25; /* t1 always 25C */
+
+ /*
+ * Derived from linear interpolation:
+ * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
+ * (Nmeas - n1) / (Tmeas - t1) = slope
+ * We want to reduce this down to the minimum computation necessary
+ * for each temperature read. Also, we want Tmeas in millicelsius
+ * and we don't want to lose precision from integer division. So...
+ * Tmeas = (Nmeas - n1) / slope + t1
+ * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
+ * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
+ * Let constant c1 = (-1000 / slope)
+ * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
+ * Let constant c2 = n1 *c1 + 1000 * t1
+ * milli_Tmeas = c2 - Nmeas * c1
+ */
+ temp64 = FACTOR0;
+ temp64 *= 1000;
+ do_div(temp64, FACTOR1 * n1 - FACTOR2);
+ c1 = temp64;
+ c2 = n1 * c1 + 1000 * t1;
+
+ /*
+ * now we only use single measure, every time we read
+ * the temperature, we will power on/down anadig thermal
+ * module
+ */
+ writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
+ writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+
+ /* setup measure freq */
+ reg = readl(&anatop->tempsense1);
+ reg &= ~TEMPSENSE1_MEASURE_FREQ;
+ reg |= MEASURE_FREQ;
+ writel(reg, &anatop->tempsense1);
+
+ /* start the measurement process */
+ writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
+ writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+ writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);
+
+ /* make sure that the latest temp is valid */
+ while ((readl(&anatop->tempsense0) &
+ TEMPSENSE0_FINISHED) == 0)
+ udelay(10000);
+
+ /* read temperature count */
+ reg = readl(&anatop->tempsense0);
+ n_meas = (reg & TEMPSENSE0_TEMP_CNT_MASK)
+ >> TEMPSENSE0_TEMP_CNT_SHIFT;
+ writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+
+ /* milli_Tmeas = c2 - Nmeas * c1 */
+ temperature = (c2 - n_meas * c1)/1000;
+
+ /* power down anatop thermal sensor */
+ writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
+ writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);
+
+ return temperature;
+}
+
+int imx_thermal_get_temp(struct udevice *dev, int *temp)
+{
+ int cpu_tmp = 0;
+
+ cpu_tmp = read_cpu_temperature(dev);
+ while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) {
+ if (cpu_tmp >= TEMPERATURE_HOT) {
+ printf("CPU Temperature is %d C, too hot to boot, waiting...\n",
+ cpu_tmp);
+ udelay(5000000);
+ cpu_tmp = read_cpu_temperature(dev);
+ } else {
+ break;
+ }
+ }
+
+ *temp = cpu_tmp;
+
+ return 0;
+}
+
+static const struct dm_thermal_ops imx_thermal_ops = {
+ .get_temp = imx_thermal_get_temp,
+};
+
+static int imx_thermal_probe(struct udevice *dev)
+{
+ unsigned int fuse = ~0;
+
+ const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
+ unsigned int *priv = dev_get_priv(dev);
+
+ /* Read Temperature calibration data fuse */
+ fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);
+
+ /* Check for valid fuse */
+ if (fuse == 0 || fuse == ~0) {
+ printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
+ return -EPERM;
+ } else {
+ printf("CPU: Thermal calibration data: 0x%x\n", fuse);
+ }
+
+ *priv = fuse;
+
+ enable_thermal_clk();
+
+ return 0;
+}
+
+U_BOOT_DRIVER(imx_thermal) = {
+ .name = "imx_thermal",
+ .id = UCLASS_THERMAL,
+ .ops = &imx_thermal_ops,
+ .probe = imx_thermal_probe,
+ .priv_auto_alloc_size = sizeof(unsigned int),
+ .flags = DM_FLAG_PRE_RELOC,
+};
--- /dev/null
+/*
+ * (C) Copyright 2014 Freescale Semiconductor, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <thermal.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+
+int thermal_get_temp(struct udevice *dev, int *temp)
+{
+ const struct dm_thermal_ops *ops = device_get_ops(dev);
+
+ if (!ops->get_temp)
+ return -ENOSYS;
+
+ return ops->get_temp(dev, temp);
+}
+
+UCLASS_DRIVER(thermal) = {
+ .id = UCLASS_THERMAL,
+ .name = "thermal",
+};
* changes to zero exactly after the last byte is fed into the
* FIFO.
*/
- count = min(burst, len - offset - 1);
+ count = min((u32)burst, len - offset - 1);
while (count--)
tpm_write_byte(data[offset++],
&lpc_tpm_dev[locality].data);
if (!gadget_is_dualspeed(gadget))
break;
device_qual(cdev);
- value = min(w_length,
- sizeof(struct usb_qualifier_descriptor));
+ value = min_t(int, w_length,
+ sizeof(struct usb_qualifier_descriptor));
break;
case USB_DT_OTHER_SPEED_CONFIG:
if (!gadget_is_dualspeed(gadget))
UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d",
urb->buffer, urb->buffer_length, urb->actual_length);
- last = min(urb->actual_length - endpoint->sent,
- endpoint->tx_packetSize);
+ last = min_t(u32, urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize);
if (last) {
u8 *cp = urb->buffer + endpoint->sent;
if (!urb || !urb->actual_length)
return -1;
- n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
+ n = min_t(unsigned int, urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize);
if (n <= 0)
return -1;
u32 ep_num = ep_index(ep);
buf = req->req.buf + req->req.actual;
- length = min(req->req.length - req->req.actual,
- ep_num ? DMA_BUFFER_SIZE : ep->ep.maxpacket);
+ length = min_t(u32, req->req.length - req->req.actual,
+ ep_num ? DMA_BUFFER_SIZE : ep->ep.maxpacket);
ep->len = length;
ep->dma_buf = buf;
case 0:
switch (wValue & 0xff00) {
case 0x0100: /* device descriptor */
- len = min3(txlen, sizeof(root_hub_dev_des), wLength);
+ len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength);
memcpy(buffer, root_hub_dev_des, len);
break;
case 0x0200: /* configuration descriptor */
- len = min3(txlen, sizeof(root_hub_config_des), wLength);
+ len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength);
memcpy(buffer, root_hub_config_des, len);
break;
case 0x0300: /* string descriptors */
switch (wValue & 0xff) {
case 0x00:
- len = min3(txlen, sizeof(root_hub_str_index0),
- wLength);
+ len = min3(txlen, (int)sizeof(root_hub_str_index0),
+ (int)wLength);
memcpy(buffer, root_hub_str_index0, len);
break;
case 0x01:
- len = min3(txlen, sizeof(root_hub_str_index1),
- wLength);
+ len = min3(txlen, (int)sizeof(root_hub_str_index1),
+ (int)wLength);
memcpy(buffer, root_hub_str_index1, len);
break;
}
data[10] = data[9];
}
- len = min3(txlen, data[0], wLength);
+ len = min3(txlen, (int)data[0], (int)wLength);
memcpy(buffer, data, len);
break;
default:
}
mdelay(1);
- len = min3(srclen, le16_to_cpu(req->length), length);
+ len = min3(srclen, (int)le16_to_cpu(req->length), length);
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
else
/* ------------------------------------------------------------------------- */
-#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
-/* ------------------------------------------------------------------------- */
-
static int isp116x_reset(struct isp116x *isp116x);
/* --- Debugging functions ------------------------------------------------- */
#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
#endif
-#if defined(CONFIG_ARM920T) || \
+#if defined(CONFIG_CPU_ARM920T) || \
defined(CONFIG_S3C24X0) || \
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef CONFIG_PCI_OHCI
static struct pci_device_id ohci_pci_ids[] = {
{0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
#undef DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
return -1; /* fail */
}
-/* based on usb_ohci.c */
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
/*-------------------------------------------------------------------------*
* Virtual Root Hub
*-------------------------------------------------------------------------*/
union xhci_trb *event, int length)
{
udev->act_len = min(length, length -
- EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
+ (int)EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
case COMP_SUCCESS:
debug("scrlen = %d\n req->length = %d\n",
srclen, le16_to_cpu(req->length));
- len = min(srclen, le16_to_cpu(req->length));
+ len = min(srclen, (int)le16_to_cpu(req->length));
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
((readb(&musbr->power) & MUSB_POWER_HSMODE) \
>> MUSB_POWER_HSMODE_SHIFT)
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
/* destination of request */
obj-$(CONFIG_VIDEO_SED13806) += sed13806.o
obj-$(CONFIG_VIDEO_SM501) += sm501.o
obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o
obj-$(CONFIG_VIDEO_TEGRA) += tegra.o
obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
obj-$(CONFIG_FORMIKE) += formike.o
#define DPRINT(x...) do{}while(0)
#endif
-#ifndef min_t
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-#endif
-
#define MAX_MAPPED_VRAM (2048*2048*4)
#define MIN_MAPPED_VRAM (1024*768*1)
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
if (x == BMP_ALIGN_CENTER)
- x = max(0, (VIDEO_VISIBLE_COLS - width) / 2);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - width) / 2);
else if (x < 0)
- x = max(0, VIDEO_VISIBLE_COLS - width + x + 1);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - width + x + 1));
if (y == BMP_ALIGN_CENTER)
- y = max(0, (VIDEO_VISIBLE_ROWS - height) / 2);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - height) / 2);
else if (y < 0)
- y = max(0, VIDEO_VISIBLE_ROWS - height + y + 1);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - height + y + 1));
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
/*
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
if (x == BMP_ALIGN_CENTER)
- x = max(0, (VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2);
else if (x < 0)
- x = max(0, VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1));
if (y == BMP_ALIGN_CENTER)
- y = max(0, (VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2);
else if (y < 0)
- y = max(0, VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1));
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
dest = (unsigned char *)screen + (y * width + x) * VIDEO_PIXEL_SIZE;
* we need to adjust the logo height
*/
if (video_logo_ypos == BMP_ALIGN_CENTER)
- video_logo_height += max(0, (VIDEO_VISIBLE_ROWS - \
+ video_logo_height += max(0, (int)(VIDEO_VISIBLE_ROWS -
VIDEO_LOGO_HEIGHT) / 2);
else if (video_logo_ypos > 0)
video_logo_height += video_logo_ypos;
--- /dev/null
+/*
+ * Display driver for Allwinner SoCs.
+ *
+ * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/display.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <linux/fb.h>
+#include <video_fb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sunxi_display {
+ GraphicDevice graphic_device;
+ bool enabled;
+} sunxi_display;
+
+static int sunxi_hdmi_hpd_detect(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+
+ /* Set pll3 to 300MHz */
+ clock_set_pll3(300000000);
+
+ /* Set hdmi parent to pll3 */
+ clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
+ CCM_HDMI_CTRL_PLL3);
+
+ /* Set ahb gating to pass */
+#ifdef CONFIG_MACH_SUN6I
+ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
+#endif
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
+
+ /* Clock on */
+ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
+
+ writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl);
+ writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0);
+
+ udelay(1000);
+
+ if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT)
+ return 1;
+
+ /* No need to keep these running */
+ clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE);
+ clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
+ clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
+#ifdef CONFIG_MACH_SUN6I
+ clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
+#endif
+ clock_set_pll3(0);
+
+ return 0;
+}
+
+/*
+ * This is the entity that mixes and matches the different layers and inputs.
+ * Allwinner calls it the back-end, but i like composer better.
+ */
+static void sunxi_composer_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ int i;
+
+#ifdef CONFIG_MACH_SUN6I
+ /* Reset off */
+ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0);
+#endif
+
+ /* Clocks on */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0);
+ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0);
+ clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000);
+
+ /* Engine bug, clear registers after reset */
+ for (i = 0x0800; i < 0x1000; i += 4)
+ writel(0, SUNXI_DE_BE0_BASE + i);
+
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE);
+}
+
+static void sunxi_composer_mode_set(struct fb_videomode *mode,
+ unsigned int address)
+{
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+
+ writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
+ &de_be->disp_size);
+ writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
+ &de_be->layer0_size);
+ writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride);
+ writel(address << 3, &de_be->layer0_addr_low32b);
+ writel(address >> 29, &de_be->layer0_addr_high4b);
+ writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl);
+
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE);
+}
+
+/*
+ * LCDC, what allwinner calls a CRTC, so timing controller and serializer.
+ */
+static void sunxi_lcdc_pll_set(int dotclock, int *clk_div, int *clk_double)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ int value, n, m, diff;
+ int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
+ int best_double = 0;
+
+ /*
+ * Find the lowest divider resulting in a matching clock, if there
+ * is no match, pick the closest lower clock, as monitors tend to
+ * not sync to higher frequencies.
+ */
+ for (m = 15; m > 0; m--) {
+ n = (m * dotclock) / 3000;
+
+ if ((n >= 9) && (n <= 127)) {
+ value = (3000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 0;
+ }
+ }
+
+ /* These are just duplicates */
+ if (!(m & 1))
+ continue;
+
+ n = (m * dotclock) / 6000;
+ if ((n >= 9) && (n <= 127)) {
+ value = (6000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 1;
+ }
+ }
+ }
+
+ debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
+ dotclock, (best_double + 1) * 3000 * best_n / best_m,
+ best_double + 1, best_n, best_m);
+
+ clock_set_pll3(best_n * 3000000);
+
+ writel(CCM_LCD_CH1_CTRL_GATE |
+ (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : CCM_LCD_CH1_CTRL_PLL3) |
+ CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
+
+ *clk_div = best_m;
+ *clk_double = best_double;
+}
+
+static void sunxi_lcdc_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+
+ /* Reset off */
+#ifdef CONFIG_MACH_SUN6I
+ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
+#else
+ setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST);
+#endif
+
+ /* Clock on */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+
+ /* Init lcdc */
+ writel(0, &lcdc->ctrl); /* Disable tcon */
+ writel(0, &lcdc->int0); /* Disable all interrupts */
+
+ /* Disable tcon0 dot clock */
+ clrbits_le32(&lcdc->tcon0_dclk, SUNXI_LCDC_TCON0_DCLK_ENABLE);
+
+ /* Set all io lines to tristate */
+ writel(0xffffffff, &lcdc->tcon0_io_tristate);
+ writel(0xffffffff, &lcdc->tcon1_io_tristate);
+}
+
+static void sunxi_lcdc_mode_set(struct fb_videomode *mode,
+ int *clk_div, int *clk_double)
+{
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ int bp, total;
+
+ /* Use tcon1 */
+ clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
+ SUNXI_LCDC_CTRL_IO_MAP_TCON1);
+
+ /* Enabled, 0x1e start delay */
+ writel(SUNXI_LCDC_TCON1_CTRL_ENABLE |
+ SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(0x1e), &lcdc->tcon1_ctrl);
+
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_source);
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_scale);
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_out);
+
+ bp = mode->hsync_len + mode->left_margin;
+ total = mode->xres + mode->right_margin + bp;
+ writel(SUNXI_LCDC_TCON1_TIMING_H_TOTAL(total) |
+ SUNXI_LCDC_TCON1_TIMING_H_BP(bp), &lcdc->tcon1_timing_h);
+
+ bp = mode->vsync_len + mode->upper_margin;
+ total = mode->yres + mode->lower_margin + bp;
+ writel(SUNXI_LCDC_TCON1_TIMING_V_TOTAL(total) |
+ SUNXI_LCDC_TCON1_TIMING_V_BP(bp), &lcdc->tcon1_timing_v);
+
+ writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
+ &lcdc->tcon1_timing_sync);
+
+ sunxi_lcdc_pll_set(mode->pixclock, clk_div, clk_double);
+}
+
+#ifdef CONFIG_MACH_SUN6I
+static void sunxi_drc_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* On sun6i the drc must be clocked even when in pass-through mode */
+ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0);
+ clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000);
+}
+#endif
+
+static void sunxi_hdmi_mode_set(struct fb_videomode *mode,
+ int clk_div, int clk_double)
+{
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ int x, y;
+
+ /* Write clear interrupt status bits */
+ writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq);
+
+ /* Init various registers, select pll3 as clock source */
+ writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity);
+ writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0);
+ writel(SUNXI_HDMI_PAD_CTRL1, &hdmi->pad_ctrl1);
+ writel(SUNXI_HDMI_PLL_CTRL, &hdmi->pll_ctrl);
+ writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
+
+ /* Setup clk div and doubler */
+ clrsetbits_le32(&hdmi->pll_ctrl, SUNXI_HDMI_PLL_CTRL_DIV_MASK,
+ SUNXI_HDMI_PLL_CTRL_DIV(clk_div));
+ if (!clk_double)
+ setbits_le32(&hdmi->pad_ctrl1, SUNXI_HDMI_PAD_CTRL1_HALVE);
+
+ /* Setup timing registers */
+ writel(SUNXI_HDMI_Y(mode->yres) | SUNXI_HDMI_X(mode->xres),
+ &hdmi->video_size);
+
+ x = mode->hsync_len + mode->left_margin;
+ y = mode->vsync_len + mode->upper_margin;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_bp);
+
+ x = mode->right_margin;
+ y = mode->lower_margin;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_fp);
+
+ x = mode->hsync_len;
+ y = mode->vsync_len;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_spw);
+
+ if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
+ setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_HOR);
+
+ if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
+ setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER);
+}
+
+static void sunxi_engines_init(void)
+{
+ sunxi_composer_init();
+ sunxi_lcdc_init();
+#ifdef CONFIG_MACH_SUN6I
+ sunxi_drc_init();
+#endif
+}
+
+static void sunxi_mode_set(struct fb_videomode *mode, unsigned int address)
+{
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ int clk_div, clk_double;
+ int retries = 3;
+
+retry:
+ clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
+ clrbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
+ clrbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
+
+ sunxi_composer_mode_set(mode, address);
+ sunxi_lcdc_mode_set(mode, &clk_div, &clk_double);
+ sunxi_hdmi_mode_set(mode, clk_div, clk_double);
+
+ setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ /*
+ * Sometimes the display pipeline does not sync up properly, if
+ * this happens the hdmi fifo underrun or overrun bits are set.
+ */
+ if (readl(&hdmi->irq) &
+ (SUNXI_HDMI_IRQ_STATUS_FIFO_UF | SUNXI_HDMI_IRQ_STATUS_FIFO_OF)) {
+ if (retries--)
+ goto retry;
+ printf("HDMI fifo under or overrun\n");
+ }
+}
+
+void *video_hw_init(void)
+{
+ static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
+ /*
+ * Vesa standard 1024x768@60
+ * 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
+ */
+ struct fb_videomode mode = {
+ .name = "1024x768",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 65000,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = 0,
+ .vmode = 0,
+ .flag = 0,
+ };
+ int ret;
+
+ memset(&sunxi_display, 0, sizeof(struct sunxi_display));
+
+ printf("Reserved %dkB of RAM for Framebuffer.\n",
+ CONFIG_SUNXI_FB_SIZE >> 10);
+ gd->fb_base = gd->ram_top;
+
+ ret = sunxi_hdmi_hpd_detect();
+ if (!ret)
+ return NULL;
+
+ printf("HDMI connected.\n");
+ sunxi_display.enabled = true;
+
+ printf("Setting up a %s console.\n", mode.name);
+ sunxi_engines_init();
+ sunxi_mode_set(&mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
+
+ /*
+ * These are the only members of this structure that are used. All the
+ * others are driver specific. There is nothing to decribe pitch or
+ * stride, but we are lucky with our hw.
+ */
+ graphic_device->frameAdrs = gd->fb_base;
+ graphic_device->gdfIndex = GDF_32BIT_X888RGB;
+ graphic_device->gdfBytesPP = 4;
+ graphic_device->winSizeX = mode.xres;
+ graphic_device->winSizeY = mode.yres;
+
+ return graphic_device;
+}
+
+/*
+ * Simplefb support.
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
+int sunxi_simplefb_setup(void *blob)
+{
+ static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
+ int offset, ret;
+
+ if (!sunxi_display.enabled)
+ return 0;
+
+ /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */
+ offset = fdt_node_offset_by_compatible(blob, -1,
+ "allwinner,simple-framebuffer");
+ while (offset >= 0) {
+ ret = fdt_find_string(blob, offset, "allwinner,pipeline",
+ "de_be0-lcd0-hdmi");
+ if (ret == 0)
+ break;
+ offset = fdt_node_offset_by_compatible(blob, offset,
+ "allwinner,simple-framebuffer");
+ }
+ if (offset < 0) {
+ eprintf("Cannot setup simplefb: node not found\n");
+ return 0; /* Keep older kernels working */
+ }
+
+ ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base,
+ graphic_device->winSizeX, graphic_device->winSizeY,
+ graphic_device->winSizeX * graphic_device->gdfBytesPP,
+ "x8r8g8b8");
+ if (ret)
+ eprintf("Cannot setup simplefb: Error setting properties\n");
+
+ return ret;
+}
+#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
debug(" <" LBAFU ", %d, %d>\n", sector, byte_offset, byte_len);
if (byte_offset != 0) {
+ int readlen;
/* read first part which isn't aligned with start of sector */
if (ext4fs_block_dev_desc->
block_read(ext4fs_block_dev_desc->dev,
printf(" ** ext2fs_devread() read error **\n");
return 0;
}
- memcpy(buf, sec_buf + byte_offset,
- min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len));
- buf += min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len);
- byte_len -= min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len);
+ readlen = min((int)ext4fs_block_dev_desc->blksz - byte_offset,
+ byte_len);
+ memcpy(buf, sec_buf + byte_offset, readlen);
+ buf += readlen;
+ byte_len -= readlen;
sector++;
}
{
unsigned int fpos = 0;
int status;
+ loff_t actread;
struct ext2fs_node *diro = (struct ext2fs_node *) dir;
#ifdef DEBUG
status = ext4fs_read_file(diro, fpos,
sizeof(struct ext2_dirent),
- (char *) &dirent);
- if (status < 1)
+ (char *)&dirent, &actread);
+ if (status < 0)
return 0;
if (dirent.namelen != 0) {
status = ext4fs_read_file(diro,
fpos +
sizeof(struct ext2_dirent),
- dirent.namelen, filename);
- if (status < 1)
+ dirent.namelen, filename,
+ &actread);
+ if (status < 0)
return 0;
fdiro = zalloc(sizeof(struct ext2fs_node));
printf("< ? > ");
break;
}
- printf("%10d %s\n",
- __le32_to_cpu(fdiro->inode.size),
+ printf("%10u %s\n",
+ __le32_to_cpu(fdiro->inode.size),
filename);
}
free(fdiro);
char *symlink;
struct ext2fs_node *diro = node;
int status;
+ loff_t actread;
if (!diro->inode_read) {
status = ext4fs_read_inode(diro->data, diro->ino, &diro->inode);
} else {
status = ext4fs_read_file(diro, 0,
__le32_to_cpu(diro->inode.size),
- symlink);
+ symlink, &actread);
if (status == 0) {
free(symlink);
return 0;
return 1;
}
-int ext4fs_open(const char *filename)
+int ext4fs_open(const char *filename, loff_t *len)
{
struct ext2fs_node *fdiro = NULL;
int status;
- int len;
if (ext4fs_root == NULL)
return -1;
if (status == 0)
goto fail;
}
- len = __le32_to_cpu(fdiro->inode.size);
+ *len = __le32_to_cpu(fdiro->inode.size);
ext4fs_file = fdiro;
- return len;
+ return 0;
fail:
ext4fs_free_node(fdiro, &ext4fs_root->diropen);
int ext4fs_read_inode(struct ext2_data *data, int ino,
struct ext2_inode *inode);
-int ext4fs_read_file(struct ext2fs_node *node, int pos,
- unsigned int len, char *buf);
+int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, loff_t len,
+ char *buf, loff_t *actread);
int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode,
struct ext2fs_node **foundnode, int expecttype);
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
return -1;
}
+
+int ext4_write_file(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite)
+{
+ int ret;
+
+ if (offset != 0) {
+ printf("** Cannot support non-zero offset **\n");
+ return -1;
+ }
+
+ /* mount the filesystem */
+ if (!ext4fs_mount(0)) {
+ printf("** Error Bad ext4 partition **\n");
+ goto fail;
+ }
+
+ ret = ext4fs_write(filename, buf, len);
+
+ if (ret) {
+ printf("** Error ext4fs_write() **\n");
+ goto fail;
+ }
+ ext4fs_close();
+
+ return 0;
+
+fail:
+ ext4fs_close();
+
+ return -1;
+}
* Optimized read file API : collects and defers contiguous sector
* reads into one potentially more efficient larger sequential read action
*/
-int ext4fs_read_file(struct ext2fs_node *node, int pos,
- unsigned int len, char *buf)
+int ext4fs_read_file(struct ext2fs_node *node, loff_t pos,
+ loff_t len, char *buf, loff_t *actread)
{
struct ext_filesystem *fs = get_fs();
int i;
previous_block_number = -1;
}
- return len;
+ *actread = len;
+ return 0;
}
int ext4fs_ls(const char *dirname)
int ext4fs_exists(const char *filename)
{
- int file_len;
+ loff_t file_len;
+ int ret;
- file_len = ext4fs_open(filename);
- return file_len >= 0;
+ ret = ext4fs_open(filename, &file_len);
+ return ret == 0;
}
-int ext4fs_size(const char *filename)
+int ext4fs_size(const char *filename, loff_t *size)
{
- return ext4fs_open(filename);
+ return ext4fs_open(filename, size);
}
-int ext4fs_read(char *buf, unsigned len)
+int ext4fs_read(char *buf, loff_t len, loff_t *actread)
{
if (ext4fs_root == NULL || ext4fs_file == NULL)
return 0;
- return ext4fs_read_file(ext4fs_file, 0, len, buf);
+ return ext4fs_read_file(ext4fs_file, 0, len, buf, actread);
}
int ext4fs_probe(block_dev_desc_t *fs_dev_desc,
return 0;
}
-int ext4_read_file(const char *filename, void *buf, int offset, int len)
+int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *len_read)
{
- int file_len;
- int len_read;
+ loff_t file_len;
+ int ret;
if (offset != 0) {
printf("** Cannot support non-zero offset **\n");
return -1;
}
- file_len = ext4fs_open(filename);
- if (file_len < 0) {
+ ret = ext4fs_open(filename, &file_len);
+ if (ret < 0) {
printf("** File not found %s **\n", filename);
return -1;
}
if (len == 0)
len = file_len;
- len_read = ext4fs_read(buf, len);
+ return ext4fs_read(buf, len, len_read);
+}
- return len_read;
+int ext4fs_uuid(char *uuid_str)
+{
+ if (ext4fs_root == NULL)
+ return -1;
+
+#ifdef CONFIG_LIB_UUID
+ uuid_bin_to_str((unsigned char *)ext4fs_root->sblock.unique_id,
+ uuid_str, UUID_STR_FORMAT_STD);
+
+ return 0;
+#else
+ return -ENOSYS;
+#endif
}
/*
* Read at most 'maxsize' bytes from 'pos' in the file associated with 'dentptr'
* into 'buffer'.
- * Return the number of bytes read or -1 on fatal errors.
+ * Update the number of bytes read in *gotsize or return -1 on fatal errors.
*/
__u8 get_contents_vfatname_block[MAX_CLUSTSIZE]
__aligned(ARCH_DMA_MINALIGN);
-static long
-get_contents(fsdata *mydata, dir_entry *dentptr, unsigned long pos,
- __u8 *buffer, unsigned long maxsize)
+static int get_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos,
+ __u8 *buffer, loff_t maxsize, loff_t *gotsize)
{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
+ loff_t filesize = FAT2CPU32(dentptr->size);
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
__u32 curclust = START(dentptr);
__u32 endclust, newclust;
- unsigned long actsize;
+ loff_t actsize;
- debug("Filesize: %ld bytes\n", filesize);
+ *gotsize = 0;
+ debug("Filesize: %llu bytes\n", filesize);
if (pos >= filesize) {
- debug("Read position past EOF: %lu\n", pos);
- return gotsize;
+ debug("Read position past EOF: %llu\n", pos);
+ return 0;
}
if (maxsize > 0 && filesize > pos + maxsize)
filesize = pos + maxsize;
- debug("%ld bytes\n", filesize);
+ debug("%llu bytes\n", filesize);
actsize = bytesperclust;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize += bytesperclust;
}
/* align to beginning of next cluster if any */
if (pos) {
- actsize = min(filesize, bytesperclust);
+ actsize = min(filesize, (loff_t)bytesperclust);
if (get_cluster(mydata, curclust, get_contents_vfatname_block,
(int)actsize) != 0) {
printf("Error reading cluster\n");
filesize -= actsize;
actsize -= pos;
memcpy(buffer, get_contents_vfatname_block + pos, actsize);
- gotsize += actsize;
+ *gotsize += actsize;
if (!filesize)
- return gotsize;
+ return 0;
buffer += actsize;
curclust = get_fatent(mydata, curclust);
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
}
if (CHECK_CLUST(newclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", newclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
endclust = newclust;
actsize += bytesperclust;
printf("Error reading cluster\n");
return -1;
}
- gotsize += actsize;
- return gotsize;
+ *gotsize += actsize;
+ return 0;
getit:
if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
printf("Error reading cluster\n");
return -1;
}
- gotsize += (int)actsize;
+ *gotsize += (int)actsize;
filesize -= actsize;
buffer += actsize;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
printf("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize = bytesperclust;
endclust = curclust;
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
l_name,
dirc);
} else {
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
s_name, dirc);
} else {
printf(" %s%c\n",
__u8 do_fat_read_at_block[MAX_CLUSTSIZE]
__aligned(ARCH_DMA_MINALIGN);
-long
-do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize, int dols, int dogetsize)
+int do_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, int dols, int dogetsize, loff_t *size)
{
char fnamecopy[2048];
boot_sector bs;
__u32 cursect;
int idx, isdir = 0;
int files = 0, dirs = 0;
- long ret = -1;
+ int ret = -1;
int firsttime;
__u32 root_cluster = 0;
int rootdir_size = 0;
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
l_name,
dirc);
} else {
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
s_name, dirc);
} else {
printf(" %s%c\n",
if (dols == LS_ROOT) {
printf("\n%d file(s), %d dir(s)\n\n",
files, dirs);
- ret = 0;
+ *size = 0;
}
goto exit;
}
if (get_dentfromdir(mydata, startsect, subname, dentptr,
isdir ? 0 : dols) == NULL) {
if (dols && !isdir)
- ret = 0;
+ *size = 0;
goto exit;
}
subname = nextname;
}
- if (dogetsize)
- ret = FAT2CPU32(dentptr->size);
- else
- ret = get_contents(mydata, dentptr, pos, buffer, maxsize);
- debug("Size: %d, got: %ld\n", FAT2CPU32(dentptr->size), ret);
+ if (dogetsize) {
+ *size = FAT2CPU32(dentptr->size);
+ ret = 0;
+ } else {
+ ret = get_contents(mydata, dentptr, pos, buffer, maxsize, size);
+ }
+ debug("Size: %u, got: %llu\n", FAT2CPU32(dentptr->size), *size);
exit:
free(mydata->fatbuf);
return ret;
}
-long
-do_fat_read(const char *filename, void *buffer, unsigned long maxsize, int dols)
+int do_fat_read(const char *filename, void *buffer, loff_t maxsize, int dols,
+ loff_t *actread)
{
- return do_fat_read_at(filename, 0, buffer, maxsize, dols, 0);
+ return do_fat_read_at(filename, 0, buffer, maxsize, dols, 0, actread);
}
int file_fat_detectfs(void)
int file_fat_ls(const char *dir)
{
- return do_fat_read(dir, NULL, 0, LS_YES);
+ loff_t size;
+
+ return do_fat_read(dir, NULL, 0, LS_YES, &size);
}
int fat_exists(const char *filename)
{
- int sz;
- sz = do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1);
- return sz >= 0;
+ int ret;
+ loff_t size;
+
+ ret = do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1, &size);
+ return ret == 0;
}
-int fat_size(const char *filename)
+int fat_size(const char *filename, loff_t *size)
{
- return do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1);
+ return do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1, size);
}
-long file_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize)
+int file_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread)
{
printf("reading %s\n", filename);
- return do_fat_read_at(filename, pos, buffer, maxsize, LS_NO, 0);
+ return do_fat_read_at(filename, pos, buffer, maxsize, LS_NO, 0,
+ actread);
}
-long file_fat_read(const char *filename, void *buffer, unsigned long maxsize)
+int file_fat_read(const char *filename, void *buffer, int maxsize)
{
- return file_fat_read_at(filename, 0, buffer, maxsize);
+ loff_t actread;
+ int ret;
+
+ ret = file_fat_read_at(filename, 0, buffer, maxsize, &actread);
+ if (ret)
+ return ret;
+ else
+ return actread;
}
-int fat_read_file(const char *filename, void *buf, int offset, int len)
+int fat_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread)
{
- int len_read;
+ int ret;
- len_read = file_fat_read_at(filename, offset, buf, len);
- if (len_read == -1) {
+ ret = file_fat_read_at(filename, offset, buf, len, actread);
+ if (ret)
printf("** Unable to read file %s **\n", filename);
- return -1;
- }
- return len_read;
+ return ret;
}
void fat_close(void)
/*
* Write at most 'maxsize' bytes from 'buffer' into
* the file associated with 'dentptr'
- * Return the number of bytes read or -1 on fatal errors.
+ * Update the number of bytes written in *gotsize and return 0
+ * or return -1 on fatal errors.
*/
static int
set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
- unsigned long maxsize)
+ loff_t maxsize, loff_t *gotsize)
{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
+ loff_t filesize = FAT2CPU32(dentptr->size);
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
__u32 curclust = START(dentptr);
__u32 endclust = 0, newclust = 0;
- unsigned long actsize;
+ loff_t actsize;
- debug("Filesize: %ld bytes\n", filesize);
+ *gotsize = 0;
+ debug("Filesize: %llu bytes\n", filesize);
if (maxsize > 0 && filesize > maxsize)
filesize = maxsize;
- debug("%ld bytes\n", filesize);
+ debug("%llu bytes\n", filesize);
actsize = bytesperclust;
endclust = curclust;
if (CHECK_CLUST(newclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", newclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
endclust = newclust;
actsize += bytesperclust;
}
/* set remaining bytes */
- gotsize += (int)actsize;
+ *gotsize += actsize;
filesize -= actsize;
buffer += actsize;
actsize = filesize;
debug("error: writing cluster\n");
return -1;
}
- gotsize += actsize;
+ *gotsize += actsize;
/* Mark end of file in FAT */
if (mydata->fatsize == 16)
newclust = 0xfffffff;
set_fatent_value(mydata, endclust, newclust);
- return gotsize;
+ return 0;
getit:
if (set_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
debug("error: writing cluster\n");
return -1;
}
- gotsize += (int)actsize;
+ *gotsize += actsize;
filesize -= actsize;
buffer += actsize;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize = bytesperclust;
curclust = endclust = newclust;
* exceed the size of the block device
* Return -1 when overflow occurs, otherwise return 0
*/
-static int check_overflow(fsdata *mydata, __u32 clustnum, unsigned long size)
+static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size)
{
__u32 startsect, sect_num;
return NULL;
}
-static int do_fat_write(const char *filename, void *buffer,
- unsigned long size)
+static int do_fat_write(const char *filename, void *buffer, loff_t size,
+ loff_t *actwrite)
{
dir_entry *dentptr, *retdent;
__u32 startsect;
int cursect;
int ret = -1, name_len;
char l_filename[VFAT_MAXLEN_BYTES];
- int write_size = size;
+ *actwrite = size;
dir_curclust = 0;
if (read_bootsectandvi(&bs, &volinfo, &mydata->fatsize)) {
ret = check_overflow(mydata, start_cluster, size);
if (ret) {
- printf("Error: %ld overflow\n", size);
+ printf("Error: %llu overflow\n", size);
goto exit;
}
goto exit;
}
- ret = set_contents(mydata, retdent, buffer, size);
+ ret = set_contents(mydata, retdent, buffer, size, actwrite);
if (ret < 0) {
printf("Error: writing contents\n");
goto exit;
}
- write_size = ret;
- debug("attempt to write 0x%x bytes\n", write_size);
+ debug("attempt to write 0x%llx bytes\n", *actwrite);
/* Flush fat buffer */
ret = flush_fat_buffer(mydata);
ret = check_overflow(mydata, start_cluster, size);
if (ret) {
- printf("Error: %ld overflow\n", size);
+ printf("Error: %llu overflow\n", size);
goto exit;
}
fill_dentry(mydata, empty_dentptr, filename,
start_cluster, size, 0x20);
- ret = set_contents(mydata, empty_dentptr, buffer, size);
+ ret = set_contents(mydata, empty_dentptr, buffer, size,
+ actwrite);
if (ret < 0) {
printf("Error: writing contents\n");
goto exit;
}
- write_size = ret;
- debug("attempt to write 0x%x bytes\n", write_size);
+ debug("attempt to write 0x%llx bytes\n", *actwrite);
/* Flush fat buffer */
ret = flush_fat_buffer(mydata);
exit:
free(mydata->fatbuf);
- return ret < 0 ? ret : write_size;
+ return ret;
}
-int file_fat_write(const char *filename, void *buffer, unsigned long maxsize)
+int file_fat_write(const char *filename, void *buffer, loff_t offset,
+ loff_t maxsize, loff_t *actwrite)
{
+ if (offset != 0) {
+ printf("Error: non zero offset is currently not suported.\n");
+ return -1;
+ }
+
printf("writing %s\n", filename);
- return do_fat_write(filename, buffer, maxsize);
+ return do_fat_write(filename, buffer, maxsize, actwrite);
}
return filesystems[current_filesystem].ls(arg);
}
-long
-file_read(const char *filename, void *buffer, unsigned long maxsize)
+int file_read(const char *filename, void *buffer, int maxsize)
{
char fullpath[1024];
const char *arg;
*/
#include <config.h>
+#include <errno.h>
#include <common.h>
#include <part.h>
#include <ext4fs.h>
return 0;
}
-static inline int fs_size_unsupported(const char *filename)
+static inline int fs_size_unsupported(const char *filename, loff_t *size)
{
return -1;
}
static inline int fs_read_unsupported(const char *filename, void *buf,
- int offset, int len)
+ loff_t offset, loff_t len,
+ loff_t *actread)
{
return -1;
}
static inline int fs_write_unsupported(const char *filename, void *buf,
- int offset, int len)
+ loff_t offset, loff_t len,
+ loff_t *actwrite)
{
return -1;
}
{
}
+static inline int fs_uuid_unsupported(char *uuid_str)
+{
+ return -1;
+}
+
struct fstype_info {
int fstype;
/*
disk_partition_t *fs_partition);
int (*ls)(const char *dirname);
int (*exists)(const char *filename);
- int (*size)(const char *filename);
- int (*read)(const char *filename, void *buf, int offset, int len);
- int (*write)(const char *filename, void *buf, int offset, int len);
+ int (*size)(const char *filename, loff_t *size);
+ int (*read)(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actread);
+ int (*write)(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite);
void (*close)(void);
+ int (*uuid)(char *uuid_str);
};
static struct fstype_info fstypes[] = {
.exists = fat_exists,
.size = fat_size,
.read = fat_read_file,
+#ifdef CONFIG_FAT_WRITE
+ .write = file_fat_write,
+#else
.write = fs_write_unsupported,
+#endif
+ .uuid = fs_uuid_unsupported,
},
#endif
#ifdef CONFIG_FS_EXT4
.exists = ext4fs_exists,
.size = ext4fs_size,
.read = ext4_read_file,
+#ifdef CONFIG_CMD_EXT4_WRITE
+ .write = ext4_write_file,
+#else
.write = fs_write_unsupported,
+#endif
+ .uuid = ext4fs_uuid,
},
#endif
#ifdef CONFIG_SANDBOX
.size = sandbox_fs_size,
.read = fs_read_sandbox,
.write = fs_write_sandbox,
+ .uuid = fs_uuid_unsupported,
},
#endif
{
.size = fs_size_unsupported,
.read = fs_read_unsupported,
.write = fs_write_unsupported,
+ .uuid = fs_uuid_unsupported,
},
};
fs_type = FS_TYPE_ANY;
}
+int fs_uuid(char *uuid_str)
+{
+ struct fstype_info *info = fs_get_info(fs_type);
+
+ return info->uuid(uuid_str);
+}
+
int fs_ls(const char *dirname)
{
int ret;
return ret;
}
-int fs_size(const char *filename)
+int fs_size(const char *filename, loff_t *size)
{
int ret;
struct fstype_info *info = fs_get_info(fs_type);
- ret = info->size(filename);
+ ret = info->size(filename, size);
fs_close();
return ret;
}
-int fs_read(const char *filename, ulong addr, int offset, int len)
+int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actread)
{
struct fstype_info *info = fs_get_info(fs_type);
void *buf;
* means read the whole file.
*/
buf = map_sysmem(addr, len);
- ret = info->read(filename, buf, offset, len);
+ ret = info->read(filename, buf, offset, len, actread);
unmap_sysmem(buf);
/* If we requested a specific number of bytes, check we got it */
- if (ret >= 0 && len && ret != len) {
+ if (ret == 0 && len && *actread != len) {
printf("** Unable to read file %s **\n", filename);
ret = -1;
}
return ret;
}
-int fs_write(const char *filename, ulong addr, int offset, int len)
+int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actwrite)
{
struct fstype_info *info = fs_get_info(fs_type);
void *buf;
int ret;
buf = map_sysmem(addr, len);
- ret = info->write(filename, buf, offset, len);
+ ret = info->write(filename, buf, offset, len, actwrite);
unmap_sysmem(buf);
- if (ret >= 0 && ret != len) {
+ if (ret < 0 && len != *actwrite) {
printf("** Unable to write file %s **\n", filename);
ret = -1;
}
int do_size(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
int fstype)
{
- int size;
+ loff_t size;
if (argc != 4)
return CMD_RET_USAGE;
if (fs_set_blk_dev(argv[1], argv[2], fstype))
return 1;
- size = fs_size(argv[3]);
- if (size < 0)
+ if (fs_size(argv[3], &size) < 0)
return CMD_RET_FAILURE;
setenv_hex("filesize", size);
unsigned long addr;
const char *addr_str;
const char *filename;
- unsigned long bytes;
- unsigned long pos;
- int len_read;
+ loff_t bytes;
+ loff_t pos;
+ loff_t len_read;
+ int ret;
unsigned long time;
char *ep;
pos = 0;
time = get_timer(0);
- len_read = fs_read(filename, addr, pos, bytes);
+ ret = fs_read(filename, addr, pos, bytes, &len_read);
time = get_timer(time);
- if (len_read <= 0)
+ if (ret < 0)
return 1;
- printf("%d bytes read in %lu ms", len_read, time);
+ printf("%llu bytes read in %lu ms", len_read, time);
if (time > 0) {
puts(" (");
print_size(len_read / time * 1000, "/s");
{
unsigned long addr;
const char *filename;
- unsigned long bytes;
- unsigned long pos;
- int len;
+ loff_t bytes;
+ loff_t pos;
+ loff_t len;
+ int ret;
unsigned long time;
if (argc < 6 || argc > 7)
if (fs_set_blk_dev(argv[1], argv[2], fstype))
return 1;
- filename = argv[3];
- addr = simple_strtoul(argv[4], NULL, 16);
+ addr = simple_strtoul(argv[3], NULL, 16);
+ filename = argv[4];
bytes = simple_strtoul(argv[5], NULL, 16);
if (argc >= 7)
pos = simple_strtoul(argv[6], NULL, 16);
pos = 0;
time = get_timer(0);
- len = fs_write(filename, addr, pos, bytes);
+ ret = fs_write(filename, addr, pos, bytes, &len);
time = get_timer(time);
- if (len <= 0)
+ if (ret < 0)
return 1;
- printf("%d bytes written in %lu ms", len, time);
+ printf("%llu bytes written in %lu ms", len, time);
if (time > 0) {
puts(" (");
print_size(len / time * 1000, "/s");
return 0;
}
+
+int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype)
+{
+ int ret;
+ char uuid[37];
+ memset(uuid, 0, sizeof(uuid));
+
+ if (argc < 3 || argc > 4)
+ return CMD_RET_USAGE;
+
+ if (fs_set_blk_dev(argv[1], argv[2], fstype))
+ return 1;
+
+ ret = fs_uuid(uuid);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ if (argc == 4)
+ setenv(argv[3], uuid);
+ else
+ printf("%s\n", uuid);
+
+ return CMD_RET_SUCCESS;
+}
return 0;
}
-long sandbox_fs_read_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long maxsize)
+int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread)
{
- ssize_t size;
+ loff_t size;
int fd, ret;
fd = os_open(filename, OS_O_RDONLY);
os_close(fd);
return ret;
}
- if (!maxsize)
- maxsize = os_get_filesize(filename);
+ if (!maxsize) {
+ ret = os_get_filesize(filename, &size);
+ if (ret) {
+ os_close(fd);
+ return ret;
+ }
+
+ maxsize = size;
+ }
+
size = os_read(fd, buffer, maxsize);
os_close(fd);
- return size;
+ if (size < 0) {
+ ret = -1;
+ } else {
+ ret = 0;
+ *actread = size;
+ }
+
+ return ret;
}
-long sandbox_fs_write_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long towrite)
+int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer,
+ loff_t towrite, loff_t *actwrite)
{
ssize_t size;
int fd, ret;
size = os_write(fd, buffer, towrite);
os_close(fd);
- return size;
+ if (size == -1) {
+ ret = -1;
+ } else {
+ ret = 0;
+ *actwrite = size;
+ }
+
+ return ret;
}
int sandbox_fs_ls(const char *dirname)
int sandbox_fs_exists(const char *filename)
{
- ssize_t sz;
+ loff_t size;
+ int ret;
- sz = os_get_filesize(filename);
- return sz >= 0;
+ ret = os_get_filesize(filename, &size);
+ return ret == 0;
}
-int sandbox_fs_size(const char *filename)
+int sandbox_fs_size(const char *filename, loff_t *size)
{
- return os_get_filesize(filename);
+ return os_get_filesize(filename, size);
}
void sandbox_fs_close(void)
{
}
-int fs_read_sandbox(const char *filename, void *buf, int offset, int len)
+int fs_read_sandbox(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread)
{
- int len_read;
+ int ret;
- len_read = sandbox_fs_read_at(filename, offset, buf, len);
- if (len_read == -1) {
+ ret = sandbox_fs_read_at(filename, offset, buf, len, actread);
+ if (ret)
printf("** Unable to read file %s **\n", filename);
- return -1;
- }
- return len_read;
+ return ret;
}
-int fs_write_sandbox(const char *filename, void *buf, int offset, int len)
+int fs_write_sandbox(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite)
{
- int len_written;
+ int ret;
- len_written = sandbox_fs_write_at(filename, offset, buf, len);
- if (len_written == -1) {
+ ret = sandbox_fs_write_at(filename, offset, buf, len, actwrite);
+ if (ret)
printf("** Unable to write file %s **\n", filename);
- return -1;
- }
- return len_written;
+ return ret;
}
#define MAX_LFS_FILESIZE 0x7fffffffffffffffUL
#endif
-#define INT_MAX ((int)(~0U>>1))
-#define INT_MIN (-INT_MAX - 1)
-#define LLONG_MAX ((long long)(~0ULL>>1))
-
/*
* These are the fs-independent mount-flags: up to 32 flags are supported
*/
unsigned long malloc_limit; /* limit address */
unsigned long malloc_ptr; /* current address */
#endif
+ struct udevice *cur_serial_dev; /* current serial device */
struct arch_global_data arch; /* architecture-specific data */
} gd_t;
#endif
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */
#define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */
+#define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */
#endif /* __ASM_GENERIC_GBL_DATA_H */
int gpio_lookup_name(const char *name, struct udevice **devp,
unsigned int *offsetp, unsigned int *gpiop);
-int name_to_gpio(const char *name);
+/**
+ * get_gpios() - Turn the values of a list of GPIOs into an integer
+ *
+ * This puts the value of the first GPIO into bit 0, the second into bit 1,
+ * etc. then returns the resulting integer.
+ *
+ * @gpio_list: List of GPIOs to collect
+ * @return resulting integer value
+ */
+unsigned gpio_get_values_as_int(const int *gpio_list);
#endif /* _ASM_GENERIC_GPIO_H_ */
#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
+#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
#define _DEBUG 0
#endif
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
-#define debug_cond(cond, fmt, args...) \
- do { \
- if (cond) \
- printf(fmt, ##args); \
+#define debug_cond(cond, fmt, args...) \
+ do { \
+ if (cond) \
+ printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
- printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
+ printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
# endif
#endif
-/*
- * General Purpose Utilities
- */
-#define min(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x < __y) ? __x : __y; })
-
-#define max(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x > __y) ? __x : __y; })
-
-#define min3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x < __y ? (__x < __z ? __x : __z) : \
- (__y < __z ? __y : __z); })
-
-#define max3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x > __y ? (__x > __z ? __x : __z) : \
- (__y > __z ? __y : __z); })
-
-/*
- * Return the absolute value of a number.
- *
- * This handles unsigned and signed longs, ints, shorts and chars. For all
- * input types abs() returns a signed long.
- *
- * For 64-bit types, use abs64()
- */
-#define abs(x) ({ \
- long ret; \
- if (sizeof(x) == sizeof(long)) { \
- long __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } else { \
- int __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } \
- ret; \
- })
-
-#define abs64(x) ({ \
- s64 __x = (x); \
- (__x < 0) ? -__x : __x; \
- })
-
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
/*
* Function Prototypes
*/
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
-#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
-/*
- * Divide positive or negative dividend by positive divisor and round
- * to closest integer. Result is undefined for negative divisors and
- * for negative dividends if the divisor variable type is unsigned.
- */
-#define DIV_ROUND_CLOSEST(x, divisor)( \
-{ \
- typeof(x) __x = x; \
- typeof(divisor) __d = divisor; \
- (((typeof(x))-1) > 0 || \
- ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
- (((__x) + ((__d) / 2)) / (__d)) : \
- (((__x) - ((__d) / 2)) / (__d)); \
-} \
-)
-
-#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
-#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
/*
* ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
* Usage of this macro shall be avoided or used with extreme care!
*/
#define DEFINE_ALIGN_BUFFER(type, name, size, align) \
- static char __##name[roundup(size * sizeof(type), align)] \
+ static char __##name[ALIGN(size * sizeof(type), align)] \
__aligned(align); \
\
static type *name = (type *)__##name
#define CONFIG_ZLIB 1
#define CONFIG_PARTITIONS 1
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_DM_WARN
+#define CONFIG_DM_DEVICE_REMOVE
+#define CONFIG_DM_STDIO
+#endif
+
#endif
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM920T /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_VCMA9 /* on a MPL VCMA9 Board */
#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */
#define CONFIG_MPC5200
#define CONFIG_A3M071 /* A3M071 board */
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */
#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
#define CONFIG_A4M072 1 /* ... on A4M072 board */
#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_TEXT_BASE 0xFE000000
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
#define __ALT_H
#undef DEBUG
-#define CONFIG_ARMV7
#define CONFIG_R8A7794
#define CONFIG_RMOBILE_BOARD_STRING "Alt"
-#define CONFIG_SH_GPIO_PFC
-#include <asm/arch/rmobile.h>
-
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_DFL
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
+#include "rcar-gen2-common.h"
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_TEXT_BASE 0x70000000
#else
#define CONFIG_SYS_TEXT_BASE 0xE6304000
#endif
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_SYS_GENERIC_BOARD
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_OF_LIBFDT
-#define BOARD_LATE_INIT
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS ""
-
-#define CONFIG_VERSION_VARIABLE
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_TMU_TIMER
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
-#define ALT_SDRAM_BASE 0x40000000
-#define ALT_SDRAM_SIZE (1024u * 1024 * 1024)
-#define ALT_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE 512
-#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF2
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-
-#define CONFIG_SYS_MEMTEST_START (ALT_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- 504 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
-#undef CONFIG_SYS_MEMTEST_SCRATCH
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE (ALT_SDRAM_BASE)
-#define CONFIG_SYS_SDRAM_SIZE (ALT_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+#define CONFIG_SCIF_USE_EXT_CLK
/* FLASH */
#define CONFIG_SPI
#define CONFIG_SPI_FLASH_QUAD
#define CONFIG_SYS_NO_FLASH
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE (256 * 1024)
-#define CONFIG_ENV_ADDR 0xC0000
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootm_low=0x40e00000\0" \
- "bootm_size=0x100000\0" \
-
/* SH Ether */
#define CONFIG_NET_MULTI
#define CONFIG_SH_ETHER
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_P_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */
#define CONFIG_SYS_TMU_CLK_DIV 4
#define CONFIG_SYS_I2C_SH
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
-#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000
#define CONFIG_SYS_I2C_SH_SPEED0 400000
-#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000
#define CONFIG_SYS_I2C_SH_SPEED1 400000
-#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
#define CONFIG_SYS_I2C_SH_SPEED2 400000
#define CONFIG_SH_I2C_DATA_HIGH 4
#define CONFIG_SH_I2C_DATA_LOW 5
#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-/* Filesystems */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
/* USB */
#define CONFIG_USB_STORAGE
#define CONFIG_USB_EHCI
/*
* SoC configurations
*/
-#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */
-#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */
+#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */
#define CONFIG_MACH_TYPE 1698 /* APF27 */
#define CONFIG_SYS_GENERIC_BOARD
#define __ARMADILLO_800EVA_H
#undef DEBUG
-#define CONFIG_ARMV7
#define CONFIG_R8A7740
#define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n"
#define CONFIG_SH_GPIO_PFC
/* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
#define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000
-#define CONFIG_ARMV7_VIRT
-
#endif /* __CONFIG_H */
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Memory Configuration
*/
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_ATMEL_LEGACY
#define CONFIG_SYS_TEXT_BASE 0x21f00000
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define AT91_SPI_CLK 15000000
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define AT91_SPI_CLK 15000000
#include <linux/sizes.h>
#include <asm/arch/sysmap.h>
-/* Architecture, CPU, chip, mach, etc */
-#define CONFIG_ARMV7
+/* CPU, chip, mach, etc */
#define CONFIG_KONA
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_GENERIC_BOARD
#include <asm/arch/configs.h>
-/* Architecture, CPU, chip, etc */
-#define CONFIG_ARMV7
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_GENERIC_BOARD
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
#define CONFIG_PHYLIB
/* i2c Settings */
-#define CONFIG_BFIN_TWI_I2C
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
* Flash Settings
# ifdef CONFIG_SPI_FLASH
# define CONFIG_CMD_SF
# endif
-# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
+# if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT)
# define CONFIG_CMD_I2C
# define CONFIG_SOFT_I2C_READ_REPEATED_START
# endif
/*
* I2C Settings
*/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT)
# ifndef CONFIG_SYS_I2C_SPEED
# define CONFIG_SYS_I2C_SPEED 50000
# endif
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_CALIMAIN
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM365
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_CAR_ADDR 0xff7e0000
+#define CONFIG_SYS_CAR_SIZE (128 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (1 << 20)
+#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000
+#define CONFIG_SYS_X86_START16 0xfffff800
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_X86_RESET_VECTOR
+#define CONFIG_NR_DRAM_BANKS 8
+#define CONFIG_X86_MRC_START 0xfffa0000
+#define CONFIG_CACHE_MRC_SIZE_KB 512
+
+#define CONFIG_COREBOOT_SERIAL
+
+#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+/*
+ * These common x86 features are not yet supported, but are added in
+ * follow-on patches in this series. Add undefs here to avoid every patch
+ * having to put things back into x86-common.h
+ */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+#undef CONFIG_ICH_SPI
+#undef CONFIG_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_SF
+#undef CONFIG_USB_EHCI
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_SCSI
+
+#define CONFIG_PCI_MEM_BUS 0xe0000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_PREF_BUS 0xd0000000
+#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x1000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0xefff
+
+#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
+ "stdout=vga,serial\0" \
+ "stderr=vga,serial\0"
+
+#endif /* __CONFIG_H */
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <asm/ibmpc.h>
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <configs/x86-common.h>
+
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_SYS_COREBOOT
-#define CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_LAST_STAGE_INIT
-#define CONFIG_SYS_VSNPRINTF
-#define CONFIG_ZBOOT_32
-#define CONFIG_PHYSMEM
#define CONFIG_SYS_EARLY_PCI_INIT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
+#define CONFIG_SYS_CAR_ADDR 0x19200000
+#define CONFIG_SYS_CAR_SIZE (16 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_LMB
-#define CONFIG_OF_LIBFDT
+#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
+#define CONFIG_TRACE_EARLY
+#define CONFIG_TRACE_EARLY_ADDR 0x01400000
#define CONFIG_BOOTSTAGE
#define CONFIG_BOOTSTAGE_REPORT
#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc
#define CONFIG_BOOTSTAGE_USER_COUNT 60
-#define CONFIG_LZO
-#define CONFIG_FIT
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
-#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-
-/*-----------------------------------------------------------------------
- * Watchdog Configuration
- */
-#undef CONFIG_WATCHDOG
-#undef CONFIG_HW_WATCHDOG
-
-/* SATA AHCI storage */
-
-#define CONFIG_SCSI_AHCI
-
-#ifdef CONFIG_SCSI_AHCI
-#define CONFIG_LIBATA
-#define CONFIG_SYS_64BIT_LBA
-#define CONFIG_SATA_INTEL 1
#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
{PCI_VENDOR_ID_INTEL, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
-/* Generic TPM interfaced through LPC bus */
-#define CONFIG_TPM
-#define CONFIG_TPM_TIS_LPC
-#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
-
-/*-----------------------------------------------------------------------
- * Real Time Clock Configuration
- */
-#define CONFIG_RTC_MC146818
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS
-
-/*-----------------------------------------------------------------------
- * Serial Configuration
- */
#define CONFIG_COREBOOT_SERIAL
-#define CONFIG_SYS_NS16550
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \
- 9600, 19200, 38400, 115200}
-#define CONFIG_SYS_NS16550_PORT_MAPPED
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
"stdout=vga,serial,cbmem\0" \
"stderr=vga,serial,cbmem\0"
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_CBMEM_CONSOLE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_SUPPORT_VFAT
-/************************************************************
- * ATAPI support (experimental)
- ************************************************************/
-#define CONFIG_ATAPI
-
-/************************************************************
- * DISK Partition support
- ************************************************************/
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
-
-#define CONFIG_CMD_PART
-#define CONFIG_CMD_CBFS
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_PARTITION_UUIDS
-
-/*-----------------------------------------------------------------------
- * Video Configuration
- */
-#define CONFIG_VIDEO
#define CONFIG_VIDEO_COREBOOT
-#define CONFIG_VIDEO_SW_CURSOR
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_I8042_KBD
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-/* x86 GPIOs are accessed through a PCI device */
-#define CONFIG_INTEL_ICH6_GPIO
-
-/*-----------------------------------------------------------------------
- * Command line configuration.
- */
-#include <config_cmd_default.h>
+#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_TRACE
#define CONFIG_CMD_TRACE
#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR 0x01400000
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_IO
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_SOURCE
-#define CONFIG_CMD_TIME
-#define CONFIG_CMD_GETTIME
-#define CONFIG_CMD_XIMG
-#define CONFIG_CMD_SCSI
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_CMD_ZBOOT
-#define CONFIG_CMD_ELF
#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS \
- "root=/dev/sdb3 init=/sbin/init rootwait ro"
-#define CONFIG_BOOTCOMMAND \
- "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
-
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + \
- 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x01000000
-#define CONFIG_SYS_LOAD_ADDR 0x20000000
-
-/*-----------------------------------------------------------------------
- * SDRAM Configuration
- */
-#define CONFIG_NR_DRAM_BANKS 4
-
-/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
-#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
-#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
-
-/*-----------------------------------------------------------------------
- * CPU Features
- */
-
-#define CONFIG_SYS_X86_TSC_TIMER
-#define CONFIG_SYS_PCAT_INTERRUPTS
-#define CONFIG_SYS_PCAT_TIMER
-#define CONFIG_SYS_NUM_IRQS 16
-
-/*-----------------------------------------------------------------------
- * Memory organization:
- * 32kB Stack
- * 16kB Cache-As-RAM @ 0x19200000
- * 256kB Monitor
- * (128kB + Environment Sector Size) malloc pool
- */
-#define CONFIG_SYS_STACK_SIZE (32 * 1024)
-#define CONFIG_SYS_CAR_ADDR 0x19200000
-#define CONFIG_SYS_CAR_SIZE (16 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (0x20000 + 128 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * FLASH configuration
- */
-#define CONFIG_ICH_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SF_TEST
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI
-
-/*-----------------------------------------------------------------------
- * Environment configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x01000
-
-/*-----------------------------------------------------------------------
- * PCI configuration
- */
-#define CONFIG_PCI
#define CONFIG_CROS_EC
#define CONFIG_CROS_EC_LPC
#define CONFIG_CMD_CROS_EC
#define CONFIG_ARCH_EARLY_INIT_R
-/*-----------------------------------------------------------------------
- * USB configuration
- */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_PCI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_TFTP_TSIZE
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-#define CONFIG_CMD_USB
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_STD_DEVICES_SETTINGS
-
#endif /* __CONFIG_H */
#define MACH_TYPE_CORVUS 2066
#define CONFIG_SYS_GENERIC_BOARD
-
/*
* Warning: changing CONFIG_SYS_TEXT_BASE requires
* adapting the initial boot program.
* hex number here!
*/
-#define CONFIG_SYS_TEXT_BASE 0x73f00000
+#define CONFIG_SYS_TEXT_BASE 0x72000000
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
-
#endif
/* Ethernet */
*/
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
128*1024, 0x1000)
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x300000
+#define CONFIG_SPL_MAX_SIZE (12 * 1024)
+#define CONFIG_SPL_STACK (16 * 1024)
+
+#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE (2 * 1024)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_SIZE (256*1024*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE 256
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
+ 48, 49, 50, 51, 52, 53, 54, 55, \
+ 56, 57, 58, 59, 60, 61, 62, 63, }
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK 132096000
+#define AT91_PLL_LOCK_TIMEOUT 1000000
+#define CONFIG_SYS_AT91_PLLA 0x20c73f03
+#define CONFIG_SYS_MCKR 0x1301
+#define CONFIG_SYS_MCKR_CSS 0x1302
+
+#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0
#endif
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
-#define CONFIG_ARM920T
#define CONFIG_AT91RM9200
#define CONFIG_CPUAT91
#define USE_920T_MMU
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA830_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA830 /* TI DA830 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM355
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM355 /* DM355 based board */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM365
#define CONFIG_SKIP_LOWLEVEL_INIT
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
/* Clock rates detection */
#ifndef __ASSEMBLY__
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
#define CONFIG_SYS_USE_NAND
#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
/*
* Commands additional to the ones defined in amcc-common.h
*/
-#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
/*
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#endif
/* High-level configuration options */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
-#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
+#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
*/
#define CONFIG_MARVELL 1
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
#define CONFIG_FEROCEON 1 /* CPU Core subversion */
#define CONFIG_88F5182 1 /* SOC Name */
#define CONFIG_MACH_EDMINIV2 1 /* Machine type */
/*
* SoC Configuration
*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
/* SPI */
#define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define AT91_SPI_CLK 15000000
/* Serial port */
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_SYS_DCACHE_OFF
--- /dev/null
+/*
+ * include/configs/gose.h
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __GOSE_H
+#define __GOSE_H
+
+#undef DEBUG
+#define CONFIG_R8A7793
+#define CONFIG_RMOBILE_BOARD_STRING "Gose"
+
+#include "rcar-gen2-common.h"
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_TEXT_BASE 0x70000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0xE6304000
+#endif
+
+/* STACK */
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
+#else
+#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
+#endif
+
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE 0x40000000
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE 0x20000000
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF0
+#define CONFIG_SCIF_USE_EXT_CLK
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SPI
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+
+/* Board Clock */
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SYS_I2C_SH_SPEED1 400000
+#define CONFIG_SYS_I2C_SH_SPEED2 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
+/* USB */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_RMOBILE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+#endif /* __GOSE_H */
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_HAWK
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC830x 1 /* MPC830x family */
+#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
+#define CONFIG_HRCON 1 /* HRCON board specific */
+
+#define CONFIG_SYS_TEXT_BASE 0xFE000000
+
+#define CONFIG_IDENT_STRING " hrcon 0.01"
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
+
+/* new uImage format support */
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+
+#define CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_CMD_FPGAD
+#define CONFIG_CMD_IOLOOP
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66.66MHz, then
+ * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz
+ * We choose the A type silicon as default, so the core is 400Mhz.
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_CORE_TO_CSB_3X1)
+/*
+ * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits
+ * in 8308's HRCWH according to the manual, but original Freescale's
+ * code has them and I've expirienced some problems using the board
+ * with BDI3000 attached when I've tried to set these bits to zero
+ * (UART doesn't work after the 'reset run' command).
+ */
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN)
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH (\
+ SICRH_ESDHC_A_SD |\
+ SICRH_ESDHC_B_SD |\
+ SICRH_ESDHC_C_SD |\
+ SICRH_GPIO_A_GPIO |\
+ SICRH_GPIO_B_GPIO |\
+ SICRH_IEEE1588_A_GPIO |\
+ SICRH_USB |\
+ SICRH_GTM_GPIO |\
+ SICRH_IEEE1588_B_GPIO |\
+ SICRH_ETSEC2_GPIO |\
+ SICRH_GPIOSEL_1 |\
+ SICRH_TMROBI_V3P3 |\
+ SICRH_TSOBI1_V2P5 |\
+ SICRH_TSOBI2_V2P5) /* 0x0037f103 */
+#define CONFIG_SYS_SICRL (\
+ SICRL_SPI_PF0 |\
+ SICRL_UART_PF0 |\
+ SICRL_IRQ_PF0 |\
+ SICRL_I2C2_PF0 |\
+ SICRL_ETSEC1_GTX_CLK125) /* 0x00000000 */
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * SERDES
+ */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+
+/*
+ * Arbiter Setup
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
+#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
+ | DDRCDR_PZ_LOZ \
+ | DDRCDR_NZ_LOZ \
+ | DDRCDR_ODT \
+ | DDRCDR_Q_DRN)
+ /* 0x7b880001 */
+/*
+ * Manually set up DDR parameters
+ * consist of one chip NT5TU64M16HG from NANYA
+ */
+
+#define CONFIG_SYS_DDR_SIZE 128 /* MB */
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
+ | CSCONFIG_ODT_RD_NEVER \
+ | CSCONFIG_ODT_WR_ONLY_CURRENT \
+ | CSCONFIG_BANK_BIT_3 \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+ /* 0x80010102 */
+#define CONFIG_SYS_DDR_TIMING_3 0
+#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
+ | (0 << TIMING_CFG0_WRT_SHIFT) \
+ | (0 << TIMING_CFG0_RRT_SHIFT) \
+ | (0 << TIMING_CFG0_WWT_SHIFT) \
+ | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+ | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+ | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+ | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
+ /* 0x00260802 */
+#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
+ | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
+ | (7 << TIMING_CFG1_CASLAT_SHIFT) \
+ | (9 << TIMING_CFG1_REFREC_SHIFT) \
+ | (2 << TIMING_CFG1_WRREC_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+ | (2 << TIMING_CFG1_WRTORD_SHIFT))
+ /* 0x26279222 */
+#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
+ | (4 << TIMING_CFG2_CPO_SHIFT) \
+ | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
+ | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
+ | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
+ | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
+ | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
+ /* 0x021848c5 */
+#define CONFIG_SYS_DDR_INTERVAL ((0x0824 << SDRAM_INTERVAL_REFINT_SHIFT) \
+ | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+ /* 0x08240100 */
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_DBW_16)
+ /* 0x43100000 */
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+ | (0x0242 << SDRAM_MODE_SD_SHIFT))
+ /* ODT 150ohm CL=4, AL=0 on SDRAM */
+#define CONFIG_SYS_DDR_MODE2 0x00000000
+
+/*
+ * Memory test
+ */
+#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END 0x07f00000
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
+#define CONFIG_SYS_LBC_LBCR 0x00040000
+
+/*
+ * FLASH on the Local Bus
+ */
+#if 1
+#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_FLASH_LEGACY_512Kx16
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
+
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB)
+
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
+ | BR_PS_16 /* 16 bit port */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV2 \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX_SET \
+ | OR_GPCM_EHTR_SET)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 135
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * FPGA
+ */
+#define CONFIG_SYS_FPGA0_BASE 0xE0600000
+#define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */
+
+/* Window base at FPGA base */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB)
+
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \
+ | BR_PS_16 /* 16 bit port */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV2 \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX_SET \
+ | OR_GPCM_EHTR_SET)
+
+#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE
+#define CONFIG_SYS_FPGA_DONE(k) 0x0010
+
+#define CONFIG_SYS_FPGA_COUNT 1
+
+#define CONFIG_SYS_MCLINK_MAX 3
+
+#define CONFIG_SYS_FPGA_PTR \
+ { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL }
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED 400000
+#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
+
+#define CONFIG_PCA953X /* NXP PCA9554 */
+#define CONFIG_PCA9698 /* NXP PCA9698 */
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
+#define CONFIG_SYS_I2C_IHS_CH2
+#define CONFIG_SYS_I2C_IHS_SPEED_2 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F
+#define CONFIG_SYS_I2C_IHS_CH3
+#define CONFIG_SYS_I2C_IHS_SPEED_3 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+#define I2C_SOFT_DECLARATIONS2
+#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F
+#define I2C_SOFT_DECLARATIONS3
+#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F
+#define I2C_SOFT_DECLARATIONS4
+#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
+
+#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8}
+#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8}
+#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4}
+
+#ifndef __ASSEMBLY__
+void fpga_gpio_set(unsigned int bus, int pin);
+void fpga_gpio_clear(unsigned int bus, int pin);
+int fpga_gpio_get(unsigned int bus, int pin);
+#endif
+
+#define I2C_ACTIVE { }
+#define I2C_TRISTATE { }
+#define I2C_READ \
+ (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0)
+#define I2C_SDA(bit) \
+ do { \
+ if (bit) \
+ fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \
+ else \
+ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \
+ } while (0)
+#define I2C_SCL(bit) \
+ do { \
+ if (bit) \
+ fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \
+ else \
+ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \
+ } while (0)
+#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
+
+/*
+ * Software (bit-bang) MII driver configuration
+ */
+#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
+#define CONFIG_BITBANGMII_MULTI
+
+/*
+ * OSD Setup
+ */
+#define CONFIG_SYS_OSD_SCREENS 1
+#define CONFIG_SYS_DP501_DIFFERENTIAL
+#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCIE1_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000
+
+/* enable PCIE clock */
+#define CONFIG_SYS_SCCR_PCIEXP1CM 1
+
+#define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
+#define CONFIG_PCIE
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define TSEC1_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+
+/* Options are: eTSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC0"
+
+/*
+ * Environment
+ */
+#if 1
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+
+#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 256 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE | \
+ HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \
+ BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
+
+#define CONFIG_HOSTNAME hrcon
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+
+#define CONFIG_PREBOOT /* enable preboot variable */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS1\0" \
+ "u-boot=u-boot.bin\0" \
+ "kernel_addr=1000000\0" \
+ "fdt_addr=C00000\0" \
+ "fdtfile=hrcon.dtb\0" \
+ "load=tftp ${loadaddr} ${u-boot}\0" \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
+ " +${filesize};cp.b ${fileaddr} " \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ "upd=run load update\0" \
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp ${kernel_addr} $bootfile;" \
+ "tftp ${fdt_addr} $fdtfile;" \
+ "bootm ${kernel_addr} - ${fdt_addr}"
+
+#define CONFIG_MMCBOOTCOMMAND \
+ "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \
+ "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \
+ "bootm ${kernel_addr} - ${fdt_addr}"
+
+#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+
+
+#endif /* __CONFIG_H */
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ sizeof(CONFIG_SYS_PROMPT)+16)
/*
* SoC Configuration
*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX27
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31 1 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)
#define CONFIG_SYS_TEXT_BASE 0x10000000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
#define __KOELSCH_H
#undef DEBUG
-#define CONFIG_ARMV7
#define CONFIG_R8A7791
#define CONFIG_RMOBILE_BOARD_STRING "Koelsch"
-#define CONFIG_SH_GPIO_PFC
-#include <asm/arch/rmobile.h>
-
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_DFL
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-
-#define CONFIG_FAT_WRITE
-#define CONFIG_EXT4_WRITE
+#include "rcar-gen2-common.h"
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_TEXT_BASE 0x70000000
#define CONFIG_SYS_TEXT_BASE 0xE6304000
#endif
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Support File sytems */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_OF_LIBFDT
-#define BOARD_LATE_INIT
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS ""
-
-#define CONFIG_VERSION_VARIABLE
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_TMU_TIMER
-
/* STACK */
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
-#define KOELSCH_SDRAM_BASE 0x40000000
-#define KOELSCH_SDRAM_SIZE (2048u * 1024 * 1024)
-#define KOELSCH_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE 512
-#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0
#define CONFIG_SCIF_USE_EXT_CLK
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-
-#define CONFIG_SYS_MEMTEST_START (KOELSCH_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- 504 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
-#undef CONFIG_SYS_MEMTEST_SCRATCH
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE (KOELSCH_SDRAM_BASE)
-#define CONFIG_SYS_SDRAM_SIZE (KOELSCH_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SPI_FLASH_SPANSION
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_ADDR 0xC0000
-
-/* Common ENV setting */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_SECT_SIZE (256 * 1024)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
/* SH Ether */
#define CONFIG_NET_MULTI
#define CONFIG_SYS_I2C_SH
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
-#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000
#define CONFIG_SYS_I2C_SH_SPEED0 400000
-#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000
#define CONFIG_SYS_I2C_SH_SPEED1 400000
-#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
#define CONFIG_SYS_I2C_SH_SPEED2 400000
#define CONFIG_SH_I2C_DATA_HIGH 4
#define CONFIG_SH_I2C_DATA_LOW 5
#define CONFIG_SYS_THUMB_BUILD
/* SoC Configuration */
-#define CONFIG_ARMV7
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_ARCH_TIMER
#define CONFIG_SYS_TEXT_BASE 0x0c001000
* include/configs/lager.h
* This file is lager board configuration.
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
#define __LAGER_H
#undef DEBUG
-#define CONFIG_ARMV7
#define CONFIG_R8A7790
#define CONFIG_RMOBILE_BOARD_STRING "Lager"
-#define CONFIG_SH_GPIO_PFC
-#include <asm/arch/rmobile.h>
-
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_DFL
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-
-#define CONFIG_FAT_WRITE
-#define CONFIG_EXT4_WRITE
+#include "rcar-gen2-common.h"
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_TEXT_BASE 0xB0000000
#else
#define CONFIG_SYS_TEXT_BASE 0xE8080000
#endif
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Support File sytems */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_OF_LIBFDT
-
-/* #define CONFIG_OF_LIBFDT */
-#define BOARD_LATE_INIT
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS ""
-
-#define CONFIG_VERSION_VARIABLE
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_TMU_TIMER
/* STACK */
#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT)
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
-#define LAGER_SDRAM_BASE 0x40000000
-#define LAGER_SDRAM_SIZE (2048u * 1024 * 1024)
-#define LAGER_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE 512
-#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0
#define CONFIG_SCIF_USE_EXT_CLK
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-
-#define CONFIG_SYS_MEMTEST_START (LAGER_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- 504 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
-#undef CONFIG_SYS_MEMTEST_SCRATCH
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE (LAGER_SDRAM_BASE)
-#define CONFIG_SYS_SDRAM_SIZE (LAGER_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
-
-/* USE SPI */
+/* SPI */
#define CONFIG_SPI
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SH_QSPI
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_SYS_NO_FLASH
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_ADDR 0xC0000
-
-/* Common ENV setting */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_SECT_SIZE (256 * 1024)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
-
/* SH Ether */
#define CONFIG_NET_MULTI
#define CONFIG_SH_ETHER
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_RCAR
-#define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000
#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000
#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000
#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000
#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
#ifdef CONFIG_SYS_USE_DATAFLASH
# define CONFIG_ATMEL_DATAFLASH_SPI
# define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
# define AT91_SPI_CLK 15000000
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31 1 /* This is a mx31 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_SYS_GENERIC_BOARD
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_DISPLAY_CPUINFO
#include "mx6sabre_common.h"
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
+#define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
#define CONFIG_SYS_FSL_USDHC_NUM 2
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
#endif /* __MX6QSABREAUTO_CONFIG_H */
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_DM
+#define CONFIG_DM_THERMAL
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_IMX6_THERMAL
+
#define CONFIG_SYS_GENERIC_BOARD
/* Size of malloc() pool */
#define CONFIG_MXC_UART
#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
#define CONFIG_MXC_OCOTP
#endif
"fdt_addr=0x88000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdev=1\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"fdt_addr=0x88000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdev=2\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
#define CONFIG_ENV_OFFSET (6 * SZ_64K)
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_CACHE
#endif
+#define CONFIG_SYS_FSL_USDHC_NUM 3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 2 /*USDHC4*/
+#endif
+
#endif /* __CONFIG_H */
#include <nomadik.h>
-#define CONFIG_ARM926EJS
#define CONFIG_NOMADIK_8815 /* cpu variant */
#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */
#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX
#ifdef CONFIG_SYS_USE_DATAFLASH
# define CONFIG_ATMEL_DATAFLASH_SPI
# define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
# define AT91_SPI_CLK 15000000
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define AT91_SPI_CLK 15000000
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_QONG
#define CONFIG_DISPLAY_CPUINFO
--- /dev/null
+/*
+ * include/configs/rcar-gen2-common.h
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __RCAR_GEN2_COMMON_H
+#define __RCAR_GEN2_COMMON_H
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* Support File sytems */
+#define CONFIG_FAT_WRITE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#define CONFIG_EXT4_WRITE
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS ""
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_TMU_TIMER
+#define CONFIG_SH_GPIO_PFC
+
+/* console */
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+
+#define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_ADDR 0xC0000
+
+/* Common ENV setting */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
+
+#endif /* __RCAR_GEN2_COMMON_H */
/* Architecture, CPU, etc.*/
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARM1176
#define CONFIG_BCM2835
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_DCACHE_OFF
#define __RSK7203_H
#undef DEBUG
-#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7203 1
#define CONFIG_RSK7203 1
#define __RSK7264_H
#undef DEBUG
-#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7264 1
#define CONFIG_RSK7264 1
#define __RSK7269_H
#undef DEBUG
-#define CONFIG_SH2A 1
#define CONFIG_CPU_SH7269 1
#define CONFIG_RSK7269 1
--- /dev/null
+/*
+ * Configuration settings for the SAMA5D4 Xplained ultra board.
+ *
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT /* Device Tree support */
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_USART3
+#define CONFIG_USART_ID ATMEL_ID_USART3
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SETEXPR
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE 0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#endif
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#endif
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* LCD */
+/* #define CONFIG_LCD */
+#ifdef CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 24
+#define CONFIG_LCD_LOGO
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#endif
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_OFFSET 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x21000000 0xa0000 0x60000; " \
+ "sf read 0x22000000 0x100000 0x300000; " \
+ "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
+ "nand read 0x22000000 0x200000 0x600000;" \
+ "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define FAT_ENV_INTERFACE "mmc"
+/*
+ * We don't specify the part number, if device 0 has partition table, it means
+ * the first partition; it no partition table, then take whole device as a
+ * FAT file system.
+ */
+#define FAT_ENV_DEVICE_AND_PART "0"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_ENV_SIZE 0x4000
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d4_xplained.dtb; " \
+ "fatload mmc 0:1 0x22000000 zImage; " \
+ "bootz 0x22000000 - 0x21000000"
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256K(env),256k(evn_redundent),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+#endif
--- /dev/null
+/*
+ * Configuration settings for the SAMA5D4EK board.
+ *
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT /* Device Tree support */
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_USART3
+#define CONFIG_USART_ID ATMEL_ID_USART3
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SETEXPR
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE 0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#endif
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#endif
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 18
+#define CONFIG_LCD_LOGO
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_OFFSET 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x21000000 0xa0000 0x60000; " \
+ "sf read 0x22000000 0x100000 0x300000; " \
+ "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
+ "nand read 0x22000000 0x200000 0x600000;" \
+ "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define FAT_ENV_INTERFACE "mmc"
+/*
+ * We don't specify the part number, if device 0 has partition table, it means
+ * the first partition; it no partition table, then take whole device as a
+ * FAT file system.
+ */
+#define FAT_ENV_DEVICE_AND_PART "0"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_ENV_SIZE 0x4000
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 sama5d4ek.dtb; " \
+ "fatload mmc 0:1 0x22000000 zImage; " \
+ "bootz 0x22000000 - 0x21000000"
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256K(env),256k(evn_redundent),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+#endif
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FS_FAT
+#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#define CONFIG_HOST_MAX_DEVICES 4
#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_MD5SUM
#define CONFIG_SYS_VSNPRINTF
#define CONFIG_SPI
#define CONFIG_CMD_SPI
#define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define CONFIG_CMD_EEPROM
#define CONFIG_SPI_M95XXX
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */
#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
#define CONFIG_IMX_SERIAL
#define __SH7752EVB_H
#undef DEBUG
-#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7752 1
#define CONFIG_SH7752EVB 1
#define __SH7753EVB_H
#undef DEBUG
-#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7753 1
#define CONFIG_SH7753EVB 1
#define __SH7757LCR_H
#undef DEBUG
-#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7757 1
#define CONFIG_SH7757LCR 1
#define CONFIG_SH7757LCR_DDR_ECC 1
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM920T /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */
#include <asm/hardware.h>
#include <linux/sizes.h>
-#define CONFIG_SYS_TEXT_BASE 0x20000000
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* CPU */
#define CONFIG_ARCH_CPU_INIT
/* UARTs/Serial console */
#define CONFIG_ATMEL_USART
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
+#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_PROMPT "Snapper> "
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_GPIO
+#define CONFIG_CMD_GPIO
#define CONFIG_CMD_USB
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_ARMV7
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SOCFPGA
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
-#define CONFIG_ARMV7_VIRT 1
-#define CONFIG_ARMV7_NONSEC 1
#define CONFIG_ARMV7_PSCI 1
-#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_CMD_GPIO
+#ifdef CONFIG_VIDEO
+/*
+ * The amount of RAM that is reserved for the FB. This will not show up as
+ * RAM to the kernel, but will be reclaimed by a KMS driver in future.
+ */
+#define CONFIG_SUNXI_FB_SIZE (8 << 20)
+
+/* Do we want to initialize a simple FB? */
+#define CONFIG_VIDEO_DT_SIMPLEFB
+
+#define CONFIG_VIDEO_SUNXI
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_LOGO
+
+/* allow both serial and cfb console. */
+#define CONFIG_CONSOLE_MUX
+/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
+
+/* To be able to hook simplefb into dt */
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+#define CONFIG_OF_BOARD_SETUP
+#endif
+
+#endif /* CONFIG_VIDEO */
+
/* Ethernet support */
#ifdef CONFIG_SUNXI_EMAC
#define CONFIG_MII /* MII PHY management */
#define CONFIG_USB_STORAGE
#endif
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_PREBOOT
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+#endif
+
#if !defined CONFIG_ENV_IS_IN_MMC && \
!defined CONFIG_ENV_IS_IN_NAND && \
!defined CONFIG_ENV_IS_IN_FAT && \
#endif
#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_USB_KEYBOARD
+#define CONSOLE_STDIN_SETTINGS \
+ "preboot=usb start\0" \
+ "stdin=serial,usbkbd\0"
+#else
+#define CONSOLE_STDIN_SETTINGS \
+ "stdin=serial\0"
+#endif
+
+#ifdef CONFIG_VIDEO
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0"
+#else
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+#endif
+
+#define CONSOLE_ENV_SETTINGS \
+ CONSOLE_STDIN_SETTINGS \
+ CONSOLE_STDOUT_SETTINGS
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdtfile=" CONFIG_FDTFILE "\0" \
"console=ttyS0,115200\0" \
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP_GPIO
*/
-#define CONFIG_SYS_TEXT_BASE 0x23f00000
+#define CONFIG_SYS_TEXT_BASE 0x21000000
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_USB_STORAGE
#endif
+/* SPI EEPROM */
+#define CONFIG_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH_STMICRO
+#define TAURUS_SPI_MASK (1 << 4)
+#define TAURUS_SPI_CS_PIN AT91_PIN_PA3
+
/* load address */
#define CONFIG_SYS_LOAD_ADDR 0x22000000
#define CONFIG_SYS_MALLOC_LEN \
ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x0
+#define CONFIG_SPL_MAX_SIZE (11 * 1024)
+#define CONFIG_SPL_STACK (16 * 1024)
+
+#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_USE_NANDFLASH 1
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_SIZE (256*1024*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE 256
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
+ 48, 49, 50, 51, 52, 53, 54, 55, \
+ 56, 57, 58, 59, 60, 61, 62, 63, }
+
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK 132096000
+#define AT91_PLL_LOCK_TIMEOUT 1000000
+#define CONFIG_SYS_AT91_PLLA 0x202A3F01
+#define CONFIG_SYS_MCKR 0x1300
+#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR)
+#define CONFIG_SYS_AT91_PLLB 0x10193F05
#endif
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
-#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
/*
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_USE_ARCH_MEMCPY
+#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
#include <asm/arch/clock.h>
/* Architecture, CPU, etc */
-#define CONFIG_ARM1176
#define CONFIG_TNETV107X
#define CONFIG_TNETV107X_EVM
#define CONFIG_TNETV107X_WATCHDOG
#define CONFIG_SPI
#define CONFIG_CMD_SPI
#define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
#define CONFIG_CMD_EEPROM
#define CONFIG_SPI_M95XXX
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
+#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
+
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#elif defined(CONFIG_TQMA6X_SPI_BOOT)
-#define CONFIG_FLASH_SECTOR_SIZE 0x10000
-
#define TQMA6_UBOOT_OFFSET 0x400
#define TQMA6_UBOOT_SECTOR_START 0x0
/* max u-boot size: 512k */
-#define TQMA6_UBOOT_SECTOR_SIZE CONFIG_FLASH_SECTOR_SIZE
+#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
#define TQMA6_UBOOT_SECTOR_COUNT 0x8
#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
TQMA6_UBOOT_SECTOR_COUNT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE
+#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
CONFIG_ENV_SECT_SIZE)
-#define TQMA6_FDT_SECT_SIZE (CONFIG_FLASH_SECTOR_SIZE)
+#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
#define TQMA6_FDT_SECTOR_COUNT 0x01
"setexpr blkc ${filesize} + " \
__stringify(TQMA6_UBOOT_OFFSET) "; " \
"setexpr size ${uboot_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${blkc} <= ${size}; then " \
"sf probe; " \
"sf erase 0 ${size}; " \
"update_kernel=run kernel_name; if tftp ${kernel}; then " \
"if itest ${filesize} > 0; then " \
"setexpr size ${kernel_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${kernel_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${filesize} <= ${size}; then " \
"sf probe; " \
"sf erase ${offset} ${size}; " \
"update_fdt=if tftp ${fdt_file}; then " \
"if itest ${filesize} > 0; then " \
"setexpr size ${fdt_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${fdt_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${filesize} <= ${size}; then " \
"sf probe; " \
"sf erase ${offset} ${size}; " \
"setenv filesize 0; setenv size ; setenv offset\0" \
"loadimage=sf probe; " \
"setexpr size ${kernel_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${kernel_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"sf read ${loadaddr} ${offset} ${size}; " \
"setenv size ; setenv offset\0" \
"loadfdt=sf probe; " \
"setexpr size ${fdt_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${fdt_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"sf read ${${fdt_addr}} ${offset} ${size}; " \
"setenv size ; setenv offset\0" \
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136
#define CONFIG_MX31
#define CONFIG_DISPLAY_CPUINFO
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000
#define AT91_SPI_CLK 8000000
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
+#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */
#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYSFLAGS_ADDR 0x1c010030
#define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR
-#define CONFIG_ARMV7_VIRT
-
#endif
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_MX35_HCLK_FREQ 24000000
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/ibmpc.h>
+
+#ifndef __CONFIG_X86_COMMON_H
+#define __CONFIG_X86_COMMON_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_SYS_VSNPRINTF
+#define CONFIG_ZBOOT_32
+#define CONFIG_PHYSMEM
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
+
+#define CONFIG_LMB
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_LZO
+#define CONFIG_FIT
+#undef CONFIG_ZLIB
+#undef CONFIG_GZIP
+#define CONFIG_SYS_BOOTM_LEN (16 << 20)
+
+/* SATA AHCI storage */
+
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SATA_INTEL
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SYS_64BIT_LBA
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
+/* Generic TPM interfaced through LPC bus */
+#define CONFIG_TPM
+#define CONFIG_TPM_TIS_LPC
+#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
+
+/*-----------------------------------------------------------------------
+ * Real Time Clock Configuration
+ */
+#define CONFIG_RTC_MC146818
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS
+
+/*-----------------------------------------------------------------------
+ * Serial Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \
+ 9600, 19200, 38400, 115200}
+#define CONFIG_SYS_NS16550_PORT_MAPPED
+
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_STDIO_DEREGISTER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SUPPORT_VFAT
+/************************************************************
+ * ATAPI support (experimental)
+ ************************************************************/
+#define CONFIG_ATAPI
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_EFI_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_CBFS
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_PARTITION_UUIDS
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* x86 GPIOs are accessed through a PCI device */
+#define CONFIG_INTEL_ICH6_GPIO
+
+/*-----------------------------------------------------------------------
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECHO
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_IO
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ITEST
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_GETTIME
+#define CONFIG_CMD_XIMG
+#define CONFIG_CMD_SCSI
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_CMD_ZBOOT
+#define CONFIG_CMD_ELF
+
+#define CONFIG_BOOTARGS \
+ "root=/dev/sdb3 init=/sbin/init rootwait ro"
+#define CONFIG_BOOTCOMMAND \
+ "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + \
+ 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000
+#define CONFIG_SYS_MEMTEST_END 0x01000000
+#define CONFIG_SYS_LOAD_ADDR 0x20000000
+
+/*-----------------------------------------------------------------------
+ * Video Configuration
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SW_CURSOR
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_I8042_KBD
+#define CONFIG_CFB_CONSOLE
+
+/*-----------------------------------------------------------------------
+ * CPU Features
+ */
+
+#define CONFIG_SYS_X86_TSC_TIMER
+#define CONFIG_SYS_PCAT_INTERRUPTS
+#define CONFIG_SYS_PCAT_TIMER
+#define CONFIG_SYS_NUM_IRQS 16
+
+#define CONFIG_SYS_STACK_SIZE (32 * 1024)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN 0x200000
+#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/*-----------------------------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_ICH_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SF_TEST
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI
+
+/*-----------------------------------------------------------------------
+ * Environment configuration
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x01000
+
+/*-----------------------------------------------------------------------
+ * PCI configuration
+ */
+#define CONFIG_PCI
+
+/*-----------------------------------------------------------------------
+ * USB configuration
+ */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_TFTP_TSIZE
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+#define CONFIG_CMD_USB
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_STD_DEVICES_SETTINGS
+
+#endif /* __CONFIG_H */
#include <asm/arch/imx-regs.h>
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#ifndef __CONFIG_ZYNQ_COMMON_H
#define __CONFIG_ZYNQ_COMMON_H
-/* High Level configuration Options */
-#define CONFIG_ARMV7
-
/* CPU clock */
#ifndef CONFIG_CPU_FREQ_HZ
# define CONFIG_CPU_FREQ_HZ 800000000
* @dev: Pointer to device to remove
* @return 0 if OK, -ve on error (an error here is normally a very bad thing)
*/
+#ifdef CONFIG_DM_DEVICE_REMOVE
int device_remove(struct udevice *dev);
+#else
+static inline int device_remove(struct udevice *dev) { return 0; }
+#endif
/**
* device_unbind() - Unbind a device, destroying it
*/
int device_unbind(struct udevice *dev);
+#ifdef CONFIG_DM_DEVICE_REMOVE
+void device_free(struct udevice *dev);
+#else
+static inline void device_free(struct udevice *dev) {}
+#endif
+
/* Cast away any volatile pointer */
#define DM_ROOT_NON_CONST (((gd_t *)gd)->dm_root)
#define DM_UCLASS_ROOT_NON_CONST (((gd_t *)gd)->uclass_root)
* @name: Name of device, typically the FDT node name
* @platdata: Configuration data for this device
* @of_offset: Device tree node offset for this device (- for none)
+ * @of_id: Pointer to the udevice_id structure which created the device
* @parent: Parent of this device, or NULL for the top level device
* @priv: Private data for this device
* @uclass: Pointer to uclass for this device
const char *name;
void *platdata;
int of_offset;
+ const struct udevice_id *of_id;
struct udevice *parent;
void *priv;
struct uclass *uclass;
*/
void *dev_get_priv(struct udevice *dev);
+/**
+ * struct dev_get_parent() - Get the parent of a device
+ *
+ * @child: Child to check
+ * @return parent of child, or NULL if this is the root device
+ */
+struct udevice *dev_get_parent(struct udevice *child);
+
+/**
+ * dev_get_of_data() - get the device tree data used to bind a device
+ *
+ * When a device is bound using a device tree node, it matches a
+ * particular compatible string as in struct udevice_id. This function
+ * returns the associated data value for that compatible string
+ */
+ulong dev_get_of_data(struct udevice *dev);
+
/**
* device_get_child() - Get the child of a device by index
*
int lists_bind_fdt(struct udevice *parent, const void *blob, int offset,
struct udevice **devp);
+/**
+ * device_bind_driver() - bind a device to a driver
+ *
+ * This binds a new device to a driver.
+ *
+ * @parent: Parent device
+ * @drv_name: Name of driver to attach to this parent
+ * @dev_name: Name of the new device thus created
+ * @devp: Returns the newly bound device
+ */
+int device_bind_driver(struct udevice *parent, const char *drv_name,
+ const char *dev_name, struct udevice **devp);
+
#endif
UCLASS_SPI_GENERIC, /* Generic SPI flash target */
UCLASS_SPI_FLASH, /* SPI flash */
UCLASS_CROS_EC, /* Chrome OS EC */
+ UCLASS_THERMAL, /* Thermal sensor */
UCLASS_COUNT,
UCLASS_INVALID = -1,
#ifndef __DM_UTIL_H
#define __DM_UTIL_H
+#ifdef CONFIG_DM_WARN
void dm_warn(const char *fmt, ...);
+#else
+static inline void dm_warn(const char *fmt, ...)
+{
+}
+#endif
#ifdef DEBUG
void dm_dbg(const char *fmt, ...);
void ext4fs_deinit(void);
int ext4fs_filename_check(char *filename);
int ext4fs_write(const char *fname, unsigned char *buffer,
- unsigned long sizebytes);
+ unsigned long sizebytes);
+int ext4_write_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actwrite);
#endif
struct ext_filesystem *get_fs(void);
-int ext4fs_open(const char *filename);
-int ext4fs_read(char *buf, unsigned len);
+int ext4fs_open(const char *filename, loff_t *len);
+int ext4fs_read(char *buf, loff_t len, loff_t *actread);
int ext4fs_mount(unsigned part_length);
void ext4fs_close(void);
void ext4fs_reinit_global(void);
int ext4fs_ls(const char *dirname);
int ext4fs_exists(const char *filename);
-int ext4fs_size(const char *filename);
+int ext4fs_size(const char *filename, loff_t *size);
void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot);
int ext4fs_devread(lbaint_t sector, int byte_offset, int byte_len, char *buf);
void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
long int read_allocated_block(struct ext2_inode *inode, int fileblock);
int ext4fs_probe(block_dev_desc_t *fs_dev_desc,
disk_partition_t *fs_partition);
-int ext4_read_file(const char *filename, void *buf, int offset, int len);
+int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
int ext4_read_superblock(char *buffer);
+int ext4fs_uuid(char *uuid_str);
#endif
typedef int (file_detectfs_func)(void);
typedef int (file_ls_func)(const char *dir);
-typedef long (file_read_func)(const char *filename, void *buffer,
- unsigned long maxsize);
+typedef int (file_read_func)(const char *filename, void *buffer,
+ int maxsize);
struct filesystem {
file_detectfs_func *detect;
int file_fat_detectfs(void);
int file_fat_ls(const char *dir);
int fat_exists(const char *filename);
-int fat_size(const char *filename);
-long file_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize);
-long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
+int fat_size(const char *filename, loff_t *size);
+int file_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread);
+int file_fat_read(const char *filename, void *buffer, int maxsize);
const char *file_getfsname(int idx);
int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-int file_fat_write(const char *filename, void *buffer, unsigned long maxsize);
-int fat_read_file(const char *filename, void *buf, int offset, int len);
+int file_fat_write(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actwrite);
+int fat_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
void fat_close(void);
#endif /* _FAT_H_ */
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
-void ft_board_setup(void *blob, bd_t *bd);
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * Add board-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_BOARD_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_board_setup(void *blob, bd_t *bd);
+
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
+/**
+ * Add system-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_system_setup(void *blob, bd_t *bd);
+
void set_working_fdt_addr(void *addr);
int fdt_shrink_to_minimum(void *blob);
int fdt_increase_size(void *fdt, int add_len);
int ft_verify_fdt(void *fdt);
int arch_fixup_memory_node(void *blob);
+int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
+ u32 height, u32 stride, const char *format);
+
#endif /* ifdef CONFIG_OF_LIBFDT */
#ifdef USE_HOSTCC
COMPAT_SAMSUNG_EXYNOS_SYSMMU, /* Exynos sysmmu */
COMPAT_PARADE_PS8625, /* Parade PS8622 EDP->LVDS bridge */
COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */
+ COMPAT_INTEL_MICROCODE, /* Intel microcode update */
+ COMPAT_MEMORY_SPD, /* Memory SPD information */
COMPAT_COUNT,
};
int fdtdec_get_int_array(const void *blob, int node, const char *prop_name,
u32 *array, int count);
+/**
+ * Look up a property in a node and return its contents in an integer
+ * array of given length. The property must exist but may have less data that
+ * expected (4*count bytes). It may have more, but this will be ignored.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param array array to fill with data
+ * @param count number of array elements
+ * @return number of array elements if ok, or -FDT_ERR_NOTFOUND if the
+ * property is not found
+ */
+int fdtdec_get_int_array_count(const void *blob, int node,
+ const char *prop_name, u32 *array, int count);
+
/**
* Look up a property in a node and return a pointer to its contents as a
* unsigned int array of given length. The property must have at least enough
* @param blob FDT blob
* @param node node to examine
* @param prop_name name of property to find
- * @param ptrp returns pointer to region, or NULL if no address
- * @param size returns size of region
- * @return 0 if ok, -1 on error (propery not found)
+ * @param basep Returns base address of region
+ * @param size Returns size of region
+ * @return 0 if ok, -1 on error (property not found)
*/
-int fdtdec_decode_region(const void *blob, int node,
- const char *prop_name, void **ptrp, size_t *size);
+int fdtdec_decode_region(const void *blob, int node, const char *prop_name,
+ fdt_addr_t *basep, fdt_size_t *sizep);
+
+enum fmap_compress_t {
+ FMAP_COMPRESS_NONE,
+ FMAP_COMPRESS_LZO,
+};
+
+enum fmap_hash_t {
+ FMAP_HASH_NONE,
+ FMAP_HASH_SHA1,
+ FMAP_HASH_SHA256,
+};
/* A flash map entry, containing an offset and length */
struct fmap_entry {
uint32_t offset;
uint32_t length;
+ uint32_t used; /* Number of bytes used in region */
+ enum fmap_compress_t compress_algo; /* Compression type */
+ enum fmap_hash_t hash_algo; /* Hash algorithm */
+ const uint8_t *hash; /* Hash value */
+ int hash_size; /* Hash size */
};
/**
*/
int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf);
+/**
+ * Decode a named region within a memory bank of a given type.
+ *
+ * This function handles selection of a memory region. The region is
+ * specified as an offset/size within a particular type of memory.
+ *
+ * The properties used are:
+ *
+ * <mem_type>-memory<suffix> for the name of the memory bank
+ * <mem_type>-offset<suffix> for the offset in that bank
+ *
+ * The property value must have an offset and a size. The function checks
+ * that the region is entirely within the memory bank.5
+ *
+ * @param blob FDT blob
+ * @param node Node containing the properties (-1 for /config)
+ * @param mem_type Type of memory to use, which is a name, such as
+ * "u-boot" or "kernel".
+ * @param suffix String to append to the memory/offset
+ * property names
+ * @param basep Returns base of region
+ * @param sizep Returns size of region
+ * @return 0 if OK, -ive on error
+ */
+int fdtdec_decode_memory_region(const void *blob, int node,
+ const char *mem_type, const char *suffix,
+ fdt_addr_t *basep, fdt_size_t *sizep);
#endif
#define EXCEL_MANUFACT 0x004A004A /* Excel Semiconductor */
#define AMIC_MANUFACT 0x00370037 /* AMIC manuf. ID in D23..D16, D7..D0 */
#define WINB_MANUFACT 0x00DA00DA /* Winbond manuf. ID in D23..D16, D7..D0 */
+#define EON_ALT_MANU 0x001C001C /* EON manuf. ID in D23..D16, D7..D0 */
/* Manufacturers inside bank 1 have ids like 0x01xx01xx */
#define EON_MANUFACT 0x011C011C /* EON manuf. ID in D23..D16, D7..D0 */
int fs_exists(const char *filename);
/*
- * Determine a file's size
+ * fs_size - Determine a file's size
*
- * Returns the file's size in bytes, or a negative value if it doesn't exist.
+ * @filename: Name of the file
+ * @size: Size of file
+ * @return 0 if ok with valid *size, negative on error
*/
-int fs_size(const char *filename);
+int fs_size(const char *filename, loff_t *size);
/*
- * Read file "filename" from the partition previously set by fs_set_blk_dev(),
- * to address "addr", starting at byte offset "offset", and reading "len"
- * bytes. "offset" may be 0 to read from the start of the file. "len" may be
- * 0 to read the entire file. Note that not all filesystem types support
- * either/both offset!=0 or len!=0.
+ * fs_read - Read file from the partition previously set by fs_set_blk_dev()
+ * Note that not all filesystem types support either/both offset!=0 or len!=0.
*
- * Returns number of bytes read on success. Returns <= 0 on error.
+ * @filename: Name of file to read from
+ * @addr: The address to read into
+ * @offset: The offset in file to read from
+ * @len: The number of bytes to read. Maybe 0 to read entire file
+ * @actread: Returns the actual number of bytes read
+ * @return 0 if ok with valid *actread, -1 on error conditions
*/
-int fs_read(const char *filename, ulong addr, int offset, int len);
+int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actread);
/*
- * Write file "filename" to the partition previously set by fs_set_blk_dev(),
- * from address "addr", starting at byte offset "offset", and writing "len"
- * bytes. "offset" may be 0 to write to the start of the file. Note that not
- * all filesystem types support offset!=0.
+ * fs_write - Write file to the partition previously set by fs_set_blk_dev()
+ * Note that not all filesystem types support offset!=0.
*
- * Returns number of bytes read on success. Returns <= 0 on error.
+ * @filename: Name of file to read from
+ * @addr: The address to read into
+ * @offset: The offset in file to read from. Maybe 0 to write to start of file
+ * @len: The number of bytes to write
+ * @actwrite: Returns the actual number of bytes written
+ * @return 0 if ok with valid *actwrite, -1 on error conditions
*/
-int fs_write(const char *filename, ulong addr, int offset, int len);
+int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actwrite);
/*
* Common implementation for various filesystem commands, optionally limited
int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
int fstype);
+/*
+ * Determine the UUID of the specified filesystem and print it. Optionally it is
+ * possible to store the UUID directly in env.
+ */
+int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype);
+
#endif /* _FS_H */
u16 y_pos;
};
+struct ihs_mdio {
+ u16 control;
+ u16 address_data;
+ u16 rx_data;
+};
+
+struct ihs_io_ep {
+ u16 transmit_data;
+ u16 rx_tx_control;
+ u16 receive_data;
+ u16 rx_tx_status;
+ u16 reserved;
+ u16 device_address;
+ u16 target_address;
+};
+
#ifdef CONFIG_NEO
struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */
u16 fpga_version; /* 0x0004 */
u16 fpga_features; /* 0x0006 */
- u16 reserved_0[6]; /* 0x0008 */
+ u16 reserved_0[1]; /* 0x0008 */
+ u16 top_interrupt; /* 0x000a */
+ u16 reserved_1[4]; /* 0x000c */
+ struct ihs_gpio gpio; /* 0x0014 */
+ u16 mpc3w_control; /* 0x001a */
+ u16 reserved_2[2]; /* 0x001c */
+ struct ihs_io_ep ep; /* 0x0020 */
+ u16 reserved_3[9]; /* 0x002e */
+ struct ihs_i2c i2c; /* 0x0040 */
+ u16 reserved_4[10]; /* 0x004c */
+ u16 mc_int; /* 0x0060 */
+ u16 mc_int_en; /* 0x0062 */
+ u16 mc_status; /* 0x0064 */
+ u16 mc_control; /* 0x0066 */
+ u16 mc_tx_data; /* 0x0068 */
+ u16 mc_tx_address; /* 0x006a */
+ u16 mc_tx_cmd; /* 0x006c */
+ u16 mc_res; /* 0x006e */
+ u16 mc_rx_cmd_status; /* 0x0070 */
+ u16 mc_rx_data; /* 0x0072 */
+ u16 reserved_5[69]; /* 0x0074 */
+ u16 reflection_high; /* 0x00fe */
+ struct ihs_osd osd; /* 0x0100 */
+ u16 reserved_6[889]; /* 0x010e */
+ u16 videomem[31736]; /* 0x0800 */
+};
+#endif
+
+#ifdef CONFIG_HRCON
+struct ihs_fpga {
+ u16 reflection_low; /* 0x0000 */
+ u16 versions; /* 0x0002 */
+ u16 fpga_version; /* 0x0004 */
+ u16 fpga_features; /* 0x0006 */
+ u16 reserved_0[1]; /* 0x0008 */
+ u16 top_interrupt; /* 0x000a */
+ u16 reserved_1[4]; /* 0x000c */
struct ihs_gpio gpio; /* 0x0014 */
u16 mpc3w_control; /* 0x001a */
- u16 reserved_1[18]; /* 0x001c */
+ u16 reserved_2[2]; /* 0x001c */
+ struct ihs_io_ep ep; /* 0x0020 */
+ u16 reserved_3[9]; /* 0x002e */
struct ihs_i2c i2c; /* 0x0040 */
- u16 reserved_2[10]; /* 0x004c */
+ u16 reserved_4[10]; /* 0x004c */
u16 mc_int; /* 0x0060 */
u16 mc_int_en; /* 0x0062 */
u16 mc_status; /* 0x0064 */
u16 mc_res; /* 0x006e */
u16 mc_rx_cmd_status; /* 0x0070 */
u16 mc_rx_data; /* 0x0072 */
- u16 reserved_3[69]; /* 0x0074 */
+ u16 reserved_5[69]; /* 0x0074 */
u16 reflection_high; /* 0x00fe */
struct ihs_osd osd; /* 0x0100 */
- u16 reserved_4[889]; /* 0x010e */
+ u16 reserved_6[889]; /* 0x010e */
u16 videomem[31736]; /* 0x0800 */
};
#endif
# define IMAGE_OF_BOARD_SETUP 0
#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+# define IMAGE_OF_SYSTEM_SETUP 1
+#else
+# define IMAGE_OF_SYSTEM_SETUP 0
+#endif
+
/*
* Operating System Codes
*/
--- /dev/null
+/*
+ *
+ * (C) Copyright 2014 Freescale Semiconductor, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _IMX_THERMAL_H_
+#define _IMX_THERMAL_H_
+
+struct imx_thermal_plat {
+ void *regs;
+ int fuse_bank;
+ int fuse_word;
+};
+
+#endif /* _IMX_THERMAL_H_ */
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
-/*
- * ..and if you can't take the strict
- * types, you can specify one yourself.
- *
- * Or not use min/max at all, of course.
- */
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-#define max_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
-
#ifndef BUG
#define BUG() do { \
printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
#define PAGE_SIZE 4096
-/**
- * upper_32_bits - return MSB bits 32-63 of a number if little endian, or
- * return MSB bits 0-31 of a number if big endian.
- * @n: the number we're accessing
- *
- * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
- * the "right shift count >= width of type" warning when that quantity is
- * 32-bits.
- */
-#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
-
-/**
- * lower_32_bits - return LSB bits 0-31 of a number if little endian, or
- * return LSB bits 32-63 of a number if big endian.
- * @n: the number we're accessing
- */
-#define lower_32_bits(n) ((u32)(n))
-
/* drivers/char/random.c */
#define get_random_bytes(...)
#define ENOTSUPP 524 /* Operation is not supported */
-/* from include/linux/kernel.h */
-/*
- * This looks more complex than it should be. But we need to
- * get the type for the ~ right in round_down (it needs to be
- * as wide as the result!), and we want to evaluate the macro
- * arguments just once each.
- */
-#define __round_mask(x, y) ((__typeof__(x))((y)-1))
-#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
-#define round_down(x, y) ((x) & ~__round_mask(x, y))
-
/* module */
#define THIS_MODULE 0
#define try_module_get(...) 1
#define blocking_notifier_call_chain(...) 0
-/*
- * Multiplies an integer by a fraction, while avoiding unnecessary
- * overflow or loss of precision.
- */
-#define mult_frac(x, numer, denom)( \
-{ \
- typeof(x) quot = (x) / (denom); \
- typeof(x) rem = (x) % (denom); \
- (quot * (numer)) + ((rem * (numer)) / (denom)); \
-} \
-)
-
#define __initdata
#define late_initcall(...)
#define cond_resched() do { } while (0)
#define yield() do { } while (0)
-#define INT_MAX ((int)(~0U>>1))
-
#define __user
#define __init
#define __exit
--- /dev/null
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+
+#include <linux/types.h>
+
+#define USHRT_MAX ((u16)(~0U))
+#define SHRT_MAX ((s16)(USHRT_MAX>>1))
+#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
+#define INT_MAX ((int)(~0U>>1))
+#define INT_MIN (-INT_MAX - 1)
+#define UINT_MAX (~0U)
+#define LONG_MAX ((long)(~0UL>>1))
+#define LONG_MIN (-LONG_MAX - 1)
+#define ULONG_MAX (~0UL)
+#define LLONG_MAX ((long long)(~0ULL>>1))
+#define LLONG_MIN (-LLONG_MAX - 1)
+#define ULLONG_MAX (~0ULL)
+#define SIZE_MAX (~(size_t)0)
+
+#define U8_MAX ((u8)~0U)
+#define S8_MAX ((s8)(U8_MAX>>1))
+#define S8_MIN ((s8)(-S8_MAX - 1))
+#define U16_MAX ((u16)~0U)
+#define S16_MAX ((s16)(U16_MAX>>1))
+#define S16_MIN ((s16)(-S16_MAX - 1))
+#define U32_MAX ((u32)~0U)
+#define S32_MAX ((s32)(U32_MAX>>1))
+#define S32_MIN ((s32)(-S32_MAX - 1))
+#define U64_MAX ((u64)~0ULL)
+#define S64_MAX ((s64)(U64_MAX>>1))
+#define S64_MIN ((s64)(-S64_MAX - 1))
+
+#define STACK_MAGIC 0xdeadbeef
+
+#define REPEAT_BYTE(x) ((~0ul / 0xff) * (x))
+
+#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
+#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
+#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+
+#if BITS_PER_LONG == 32
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d)
+#else
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP(ll,d)
+#endif
+
+/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */
+#define roundup(x, y) ( \
+{ \
+ const typeof(y) __y = y; \
+ (((x) + (__y - 1)) / __y) * __y; \
+} \
+)
+#define rounddown(x, y) ( \
+{ \
+ typeof(x) __x = (x); \
+ __x - (__x % (y)); \
+} \
+)
+
+/*
+ * Divide positive or negative dividend by positive divisor and round
+ * to closest integer. Result is undefined for negative divisors and
+ * for negative dividends if the divisor variable type is unsigned.
+ */
+#define DIV_ROUND_CLOSEST(x, divisor)( \
+{ \
+ typeof(x) __x = x; \
+ typeof(divisor) __d = divisor; \
+ (((typeof(x))-1) > 0 || \
+ ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
+ (((__x) + ((__d) / 2)) / (__d)) : \
+ (((__x) - ((__d) / 2)) / (__d)); \
+} \
+)
+
+/*
+ * Multiplies an integer by a fraction, while avoiding unnecessary
+ * overflow or loss of precision.
+ */
+#define mult_frac(x, numer, denom)( \
+{ \
+ typeof(x) quot = (x) / (denom); \
+ typeof(x) rem = (x) % (denom); \
+ (quot * (numer)) + ((rem * (numer)) / (denom)); \
+} \
+)
+
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
+
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
+/*
+ * abs() handles unsigned and signed longs, ints, shorts and chars. For all
+ * input types abs() returns a signed long.
+ * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()
+ * for those.
+ */
+#define abs(x) ({ \
+ long ret; \
+ if (sizeof(x) == sizeof(long)) { \
+ long __x = (x); \
+ ret = (__x < 0) ? -__x : __x; \
+ } else { \
+ int __x = (x); \
+ ret = (__x < 0) ? -__x : __x; \
+ } \
+ ret; \
+ })
+
+#define abs64(x) ({ \
+ s64 __x = (x); \
+ (__x < 0) ? -__x : __x; \
+ })
+
+/*
+ * min()/max()/clamp() macros that also do
+ * strict type-checking.. See the
+ * "unnecessary" pointer comparison.
+ */
+#define min(x, y) ({ \
+ typeof(x) _min1 = (x); \
+ typeof(y) _min2 = (y); \
+ (void) (&_min1 == &_min2); \
+ _min1 < _min2 ? _min1 : _min2; })
+
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+
+#define min3(x, y, z) min((typeof(x))min(x, y), z)
+#define max3(x, y, z) max((typeof(x))max(x, y), z)
+
+/**
+ * min_not_zero - return the minimum that is _not_ zero, unless both are zero
+ * @x: value1
+ * @y: value2
+ */
+#define min_not_zero(x, y) ({ \
+ typeof(x) __x = (x); \
+ typeof(y) __y = (y); \
+ __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
+
+/**
+ * clamp - return a value clamped to a given range with strict typechecking
+ * @val: current value
+ * @lo: lowest allowable value
+ * @hi: highest allowable value
+ *
+ * This macro does strict typechecking of lo/hi to make sure they are of the
+ * same type as val. See the unnecessary pointer comparisons.
+ */
+#define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
+
+/*
+ * ..and if you can't take the strict
+ * types, you can specify one yourself.
+ *
+ * Or not use min/max/clamp at all, of course.
+ */
+#define min_t(type, x, y) ({ \
+ type __min1 = (x); \
+ type __min2 = (y); \
+ __min1 < __min2 ? __min1: __min2; })
+
+#define max_t(type, x, y) ({ \
+ type __max1 = (x); \
+ type __max2 = (y); \
+ __max1 > __max2 ? __max1: __max2; })
+
+/**
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * 'type' to make all the comparisons.
+ */
+#define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)
+
+/**
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument 'val' is. This is useful when val is an unsigned
+ * type and min and max are literals that will otherwise be assigned a signed
+ * integer type.
+ */
+#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
+
+
+/*
+ * swap - swap value of @a and @b
+ */
+#define swap(a, b) \
+ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+#endif
#else
-#ifdef USE_DL_PREFIX
-#define cALLOc dlcalloc
-#define fREe dlfree
-#define mALLOc dlmalloc
-#define mEMALIGn dlmemalign
-#define rEALLOc dlrealloc
-#define vALLOc dlvalloc
-#define pvALLOc dlpvalloc
-#define mALLINFo dlmallinfo
-#define mALLOPt dlmallopt
-#else /* USE_DL_PREFIX */
-#define cALLOc calloc
-#define fREe free
-#define mALLOc malloc
-#define mEMALIGn memalign
-#define rEALLOc realloc
-#define vALLOc valloc
-#define pvALLOc pvalloc
-#define mALLINFo mallinfo
-#define mALLOPt mallopt
-#endif /* USE_DL_PREFIX */
+#ifdef CONFIG_SYS_MALLOC_SIMPLE
+#define malloc malloc_simple
+#define realloc realloc_simple
+#define memalign memalign_simple
+static inline void free(void *ptr) {}
+void *calloc(size_t nmemb, size_t size);
+void *memalign_simple(size_t alignment, size_t bytes);
+void *realloc_simple(void *ptr, size_t size);
+#else
+
+# ifdef USE_DL_PREFIX
+# define cALLOc dlcalloc
+# define fREe dlfree
+# define mALLOc dlmalloc
+# define mEMALIGn dlmemalign
+# define rEALLOc dlrealloc
+# define vALLOc dlvalloc
+# define pvALLOc dlpvalloc
+# define mALLINFo dlmallinfo
+# define mALLOPt dlmallopt
+# else /* USE_DL_PREFIX */
+# define cALLOc calloc
+# define fREe free
+# define mALLOc malloc
+# define mEMALIGn memalign
+# define rEALLOc realloc
+# define vALLOc valloc
+# define pvALLOc pvalloc
+# define mALLINFo mallinfo
+# define mALLOPt mallopt
+# endif /* USE_DL_PREFIX */
#endif
/* Public routines */
-#if __STD_C
+/* Simple versions which can be used when space is tight */
+void *malloc_simple(size_t size);
+
+# if __STD_C
Void_t* mALLOc(size_t);
void fREe(Void_t*);
void malloc_stats(void);
int mALLOPt(int, int);
struct mallinfo mALLINFo(void);
-#else
+# else
Void_t* mALLOc();
void fREe();
Void_t* rEALLOc();
void malloc_stats();
int mALLOPt();
struct mallinfo mALLINFo();
+# endif
#endif
/*
#define ENV_OFFSET_SIZE 8
int get_nand_env_oob(nand_info_t *nand, unsigned long *result);
#endif
+int spl_nand_erase_one(int block, int page);
* Get the size of a file
*
* @param fname Filename to check
- * @return size of file, or -1 if an error ocurred
+ * @param size size of file is returned if no error
+ * @return 0 on success or -1 if an error ocurred
*/
-ssize_t os_get_filesize(const char *fname);
+int os_get_filesize(const char *fname, loff_t *size);
/**
* Write a character to the controlling OS terminal
extern struct pci_controller* pci_bus_to_hose(int bus);
extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr);
+extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev);
extern int pci_hose_scan(struct pci_controller *hose);
extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
PMIC_NUM_OF_REGS = 0x7f,
};
+/*
+ * Buck Regulators
+ */
+
+/* SW1A/B/C Output Voltage Configuration */
+#define SW1x_0_300V 0
+#define SW1x_0_325V 1
+#define SW1x_0_350V 2
+#define SW1x_0_375V 3
+#define SW1x_0_400V 4
+#define SW1x_0_425V 5
+#define SW1x_0_450V 6
+#define SW1x_0_475V 7
+#define SW1x_0_500V 8
+#define SW1x_0_525V 9
+#define SW1x_0_550V 10
+#define SW1x_0_575V 11
+#define SW1x_0_600V 12
+#define SW1x_0_625V 13
+#define SW1x_0_650V 14
+#define SW1x_0_675V 15
+#define SW1x_0_700V 16
+#define SW1x_0_725V 17
+#define SW1x_0_750V 18
+#define SW1x_0_775V 19
+#define SW1x_0_800V 20
+#define SW1x_0_825V 21
+#define SW1x_0_850V 22
+#define SW1x_0_875V 23
+#define SW1x_0_900V 24
+#define SW1x_0_925V 25
+#define SW1x_0_950V 26
+#define SW1x_0_975V 27
+#define SW1x_1_000V 28
+#define SW1x_1_025V 29
+#define SW1x_1_050V 30
+#define SW1x_1_075V 31
+#define SW1x_1_100V 32
+#define SW1x_1_125V 33
+#define SW1x_1_150V 34
+#define SW1x_1_175V 35
+#define SW1x_1_200V 36
+#define SW1x_1_225V 37
+#define SW1x_1_250V 38
+#define SW1x_1_275V 39
+#define SW1x_1_300V 40
+#define SW1x_1_325V 41
+#define SW1x_1_350V 42
+#define SW1x_1_375V 43
+#define SW1x_1_400V 44
+#define SW1x_1_425V 45
+#define SW1x_1_450V 46
+#define SW1x_1_475V 47
+#define SW1x_1_500V 48
+#define SW1x_1_525V 49
+#define SW1x_1_550V 50
+#define SW1x_1_575V 51
+#define SW1x_1_600V 52
+#define SW1x_1_625V 53
+#define SW1x_1_650V 54
+#define SW1x_1_675V 55
+#define SW1x_1_700V 56
+#define SW1x_1_725V 57
+#define SW1x_1_750V 58
+#define SW1x_1_775V 59
+#define SW1x_1_800V 60
+#define SW1x_1_825V 61
+#define SW1x_1_850V 62
+#define SW1x_1_875V 63
+
+#define SW1x_NORMAL_MASK 0x3f
+#define SW1x_STBY_MASK 0x3f
+#define SW1x_OFF_MASK 0x3f
+
+#define SW1xCONF_DVSSPEED_MASK 0xc0
+#define SW1xCONF_DVSSPEED_2US 0x00
+#define SW1xCONF_DVSSPEED_4US 0x40
+#define SW1xCONF_DVSSPEED_8US 0x80
+#define SW1xCONF_DVSSPEED_16US 0xc0
+
/*
* LDO Configuration
*/
int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
-long sandbox_fs_read_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long maxsize);
+int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread);
+int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actwrite);
void sandbox_fs_close(void);
int sandbox_fs_ls(const char *dirname);
int sandbox_fs_exists(const char *filename);
-int sandbox_fs_size(const char *filename);
-int fs_read_sandbox(const char *filename, void *buf, int offset, int len);
-int fs_write_sandbox(const char *filename, void *buf, int offset, int len);
+int sandbox_fs_size(const char *filename, loff_t *size);
+int fs_read_sandbox(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
+int fs_write_sandbox(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite);
#endif
#include <part.h>
int init_sata(int dev);
+int reset_sata(int dev);
int scan_sata(int dev);
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer);
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer);
int sata_initialize(void);
int __sata_initialize(void);
+int sata_stop(void);
+int __sata_stop(void);
int sata_port_status(int dev, int port);
extern block_dev_desc_t sata_dev_desc[];
#include <asm/types.h>
-#if defined(CONFIG_SH3)
+#if defined(CONFIG_CPU_SH3)
struct tmu_regs {
u8 tocr;
u8 reserved0;
u16 reserved4;
u32 tcpr2;
};
-#endif /* CONFIG_SH3 */
+#endif /* CONFIG_CPU_SH3 */
-#if defined(CONFIG_SH4) || defined(CONFIG_RMOBILE)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_RMOBILE)
struct tmu_regs {
u32 reserved;
u8 tstr;
u16 tcr2;
u16 reserved5;
};
-#endif /* CONFIG_SH4 */
+#endif /* CONFIG_CPU_SH4 */
static inline unsigned long get_tmu0_clk_rate(void)
{
int spi_chip_select(struct udevice *slave);
/**
- * spi_bind_device() - bind a device to a bus's chip select
- *
- * This binds a new device to an given chip select (which must be unused).
+ * spi_find_chip_select() - Find the slave attached to chip select
*
* @bus: SPI bus to search
- * @cs: Chip select to attach to
- * @drv_name: Name of driver to attach to this chip select
- * @dev_name: Name of the new device thus created
- * @devp: Returns the newly bound device
+ * @cs: Chip select to look for
+ * @devp: Returns the slave device if found
+ * @return 0 if found, -ENODEV on error
*/
-int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
- const char *dev_name, struct udevice **devp);
+int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp);
/**
* spi_ofdata_to_platdata() - decode standard SPI platform data
void preloader_console_init(void);
u32 spl_boot_device(void);
u32 spl_boot_mode(void);
+void spl_set_header_raw_uboot(void);
void spl_parse_image_header(const struct image_header *header);
void spl_board_prepare_for_linux(void);
void __noreturn jump_to_image_linux(void *arg);
--- /dev/null
+/*
+ *
+ * (C) Copyright 2014 Freescale Semiconductor, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _THERMAL_H_
+#define _THERMAL_H_
+
+#include <dm.h>
+
+int thermal_get_temp(struct udevice *dev, int *temp);
+
+/**
+ * struct struct dm_thermal_ops - Driver model Thermal operations
+ *
+ * The uclass interface is implemented by all Thermal devices which use
+ * driver model.
+ */
+struct dm_thermal_ops {
+ /**
+ * Get the current temperature
+ *
+ * The device provided is the slave device. It's parent controller
+ * will be used to provide the communication.
+ *
+ * This must be called before doing any transfers with a Thermal slave.
+ * It will enable and initialize any Thermal hardware as necessary,
+ * and make sure that the SCK line is in the correct idle state. It is
+ * not allowed to claim the same bus for several slaves without
+ * releasing the bus in between.
+ *
+ * @dev: The Thermal device
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+ int (*get_temp)(struct udevice *dev, int *temp);
+};
+
+#endif /* _THERMAL_H_ */
#undef CONFIG_MTD_UBI_BLOCK
+/* ubi_init() disables returning error codes when built into the Linux
+ * kernel so that it doesn't hang the Linux kernel boot process. Since
+ * the U-Boot driver code depends on getting valid error codes from this
+ * function we just tell the UBI layer that we are building as a module
+ * (which only enables the additional error reporting).
+ */
+#define CONFIG_MTD_UBI_MODULE
+
#if !defined(CONFIG_MTD_UBI_BEB_LIMIT)
#define CONFIG_MTD_UBI_BEB_LIMIT 20
#endif
#ifdef CONFIG_SYS_MALLOC_F_LEN
DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
#endif
+#ifdef CONFIG_X86
+ DEFINE(GD_BIST, offsetof(struct global_data, arch.bist));
+#endif
#if defined(CONFIG_ARM)
COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"),
COMPAT(PARADE_PS8625, "parade,ps8625"),
COMPAT(COMPAT_INTEL_LPC, "intel,lpc"),
+ COMPAT(INTEL_MICROCODE, "intel,microcode"),
+ COMPAT(MEMORY_SPD, "memory-spd"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
slash = strrchr(prop, '/');
if (strcmp(slash + 1, find_name))
continue;
- for (p = name; *p; p++) {
- if (isdigit(*p)) {
- *seqp = simple_strtoul(p, NULL, 10);
+ for (p = name + strlen(name) - 1; p > name; p--) {
+ if (!isdigit(*p)) {
+ *seqp = simple_strtoul(p + 1, NULL, 10);
debug("Found seq %d\n", *seqp);
return 0;
}
return err;
}
+int fdtdec_get_int_array_count(const void *blob, int node,
+ const char *prop_name, u32 *array, int count)
+{
+ const u32 *cell;
+ int len, elems;
+ int i;
+
+ debug("%s: %s\n", __func__, prop_name);
+ cell = fdt_getprop(blob, node, prop_name, &len);
+ if (!cell)
+ return -FDT_ERR_NOTFOUND;
+ elems = len / sizeof(u32);
+ if (count > elems)
+ count = elems;
+ for (i = 0; i < count; i++)
+ array[i] = fdt32_to_cpu(cell[i]);
+
+ return count;
+}
+
const u32 *fdtdec_locate_array(const void *blob, int node,
const char *prop_name, int count)
{
return (char *)nodep;
}
-int fdtdec_decode_region(const void *blob, int node,
- const char *prop_name, void **ptrp, size_t *size)
+int fdtdec_decode_region(const void *blob, int node, const char *prop_name,
+ fdt_addr_t *basep, fdt_size_t *sizep)
{
const fdt_addr_t *cell;
int len;
- debug("%s: %s\n", __func__, prop_name);
+ debug("%s: %s: %s\n", __func__, fdt_get_name(blob, node, NULL),
+ prop_name);
cell = fdt_getprop(blob, node, prop_name, &len);
- if (!cell || (len != sizeof(fdt_addr_t) * 2))
+ if (!cell || (len < sizeof(fdt_addr_t) * 2)) {
+ debug("cell=%p, len=%d\n", cell, len);
return -1;
+ }
+
+ *basep = fdt_addr_to_cpu(*cell);
+ *sizep = fdt_size_to_cpu(cell[1]);
+ debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep,
+ (ulong)*sizep);
- *ptrp = map_sysmem(fdt_addr_to_cpu(*cell), *size);
- *size = fdt_size_to_cpu(cell[1]);
- debug("%s: size=%zx\n", __func__, *size);
return 0;
}
int fdtdec_read_fmap_entry(const void *blob, int node, const char *name,
struct fmap_entry *entry)
{
+ const char *prop;
u32 reg[2];
if (fdtdec_get_int_array(blob, node, "reg", reg, 2)) {
}
entry->offset = reg[0];
entry->length = reg[1];
+ entry->used = fdtdec_get_int(blob, node, "used", entry->length);
+ prop = fdt_getprop(blob, node, "compress", NULL);
+ entry->compress_algo = prop && !strcmp(prop, "lzo") ?
+ FMAP_COMPRESS_LZO : FMAP_COMPRESS_NONE;
+ prop = fdt_getprop(blob, node, "hash", &entry->hash_size);
+ entry->hash_algo = prop ? FMAP_HASH_SHA256 : FMAP_HASH_NONE;
+ entry->hash = (uint8_t *)prop;
return 0;
}
return 0;
}
+
+int fdtdec_decode_memory_region(const void *blob, int config_node,
+ const char *mem_type, const char *suffix,
+ fdt_addr_t *basep, fdt_size_t *sizep)
+{
+ char prop_name[50];
+ const char *mem;
+ fdt_size_t size, offset_size;
+ fdt_addr_t base, offset;
+ int node;
+
+ if (config_node == -1) {
+ config_node = fdt_path_offset(blob, "/config");
+ if (config_node < 0) {
+ debug("%s: Cannot find /config node\n", __func__);
+ return -ENOENT;
+ }
+ }
+ if (!suffix)
+ suffix = "";
+
+ snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type,
+ suffix);
+ mem = fdt_getprop(blob, config_node, prop_name, NULL);
+ if (!mem) {
+ debug("%s: No memory type for '%s', using /memory\n", __func__,
+ prop_name);
+ mem = "/memory";
+ }
+
+ node = fdt_path_offset(blob, mem);
+ if (node < 0) {
+ debug("%s: Failed to find node '%s': %s\n", __func__, mem,
+ fdt_strerror(node));
+ return -ENOENT;
+ }
+
+ /*
+ * Not strictly correct - the memory may have multiple banks. We just
+ * use the first
+ */
+ if (fdtdec_decode_region(blob, node, "reg", &base, &size)) {
+ debug("%s: Failed to decode memory region %s\n", __func__,
+ mem);
+ return -EINVAL;
+ }
+
+ snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type,
+ suffix);
+ if (fdtdec_decode_region(blob, config_node, prop_name, &offset,
+ &offset_size)) {
+ debug("%s: Failed to decode memory region '%s'\n", __func__,
+ prop_name);
+ return -EINVAL;
+ }
+
+ *basep = base + offset;
+ *sizep = offset_size;
+
+ return 0;
+}
#endif
long l, n;
long m;
- n = DIV_ROUND(hz, 1000) / 1000L;
+ n = DIV_ROUND_CLOSEST(hz, 1000) / 1000L;
l = sprintf (buf, "%ld", n);
hz -= n * 1000000L;
- m = DIV_ROUND(hz, 1000L);
+ m = DIV_ROUND_CLOSEST(hz, 1000L);
if (m != 0)
sprintf (buf + l, ".%03ld", m);
return (buf);
#include <div64.h>
#define noinline __attribute__((noinline))
-/* some reluctance to put this into a new limits.h, so it is here */
-#define INT_MAX ((int)(~0U>>1))
-
unsigned long simple_strtoul(const char *cp, char **endp,
unsigned int base)
{
static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
int field_width, int precision, int flags)
{
+ u64 num = (uintptr_t)ptr;
+
/*
* Being a boot loader, we explicitly allow pointers to
* (physical) address null.
#ifdef CONFIG_CMD_NET
switch (*fmt) {
+ case 'a':
+ flags |= SPECIAL | ZEROPAD;
+
+ switch (fmt[1]) {
+ case 'p':
+ default:
+ field_width = sizeof(phys_addr_t) * 2 + 2;
+ num = *(phys_addr_t *)ptr;
+ break;
+ }
+ break;
case 'm':
flags |= SPECIAL;
/* Fallthrough */
field_width = 2*sizeof(void *);
flags |= ZEROPAD;
}
- return number(buf, end, (unsigned long)ptr, 16, field_width,
- precision, flags);
+ return number(buf, end, num, 16, field_width, precision, flags);
}
static int vsnprintf_internal(char *buf, size_t size, const char *fmt,
libs-y += $(CPUDIR)/
-ifdef SOC
-libs-y += $(CPUDIR)/$(SOC)/
-endif
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
+libs-$(CONFIG_SPL_DM) += drivers/core/
libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
-libs-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
+libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
endif
endif
+ifeq ($(CONFIG_SYS_SOC),"at91")
+ALL-y += boot.bin
+endif
+
all: $(ALL-y)
ifdef CONFIG_SAMSUNG
--- /dev/null
+#!/bin/bash
+#
+# (C) Copyright 2014 Suriyan Ramasami
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+# Invoke this test script from U-Boot base directory as ./test/fs/fs-test.sh
+# It currently tests the fs/sb and native commands for ext4 and fat partitions
+# Expected results are as follows:
+# EXT4 tests:
+# fs-test.sb.ext4.out: Summary: PASS: 17 FAIL: 2
+# fs-test.ext4.out: Summary: PASS: 11 FAIL: 8
+# fs-test.fs.ext4.out: Summary: PASS: 11 FAIL: 8
+# FAT tests:
+# fs-test.sb.fat.out: Summary: PASS: 17 FAIL: 2
+# fs-test.fat.out: Summary: PASS: 19 FAIL: 0
+# fs-test.fs.fat.out: Summary: PASS: 19 FAIL: 0
+# Total Summary: TOTAL PASS: 94 TOTAL FAIL: 20
+
+# pre-requisite binaries list.
+PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir"
+
+# All generated output files from this test will be in $OUT_DIR
+# Hence everything is sandboxed.
+OUT_DIR="sandbox/test/fs"
+
+# Location of generated sandbox u-boot
+UBOOT="./sandbox/u-boot"
+
+# Our mount directory will be in the sandbox
+MOUNT_DIR="${OUT_DIR}/mnt"
+
+# The file system image we create will have the $IMG prefix.
+IMG="${OUT_DIR}/3GB"
+
+# $SMALL_FILE is the name of the 1MB file in the file system image
+SMALL_FILE="1MB.file"
+
+# $BIG_FILE is the name of the 2.5GB file in the file system image
+BIG_FILE="2.5GB.file"
+
+# $MD5_FILE will have the expected md5s when we do the test
+# They shall have a suffix which represents their file system (ext4/fat)
+MD5_FILE="${OUT_DIR}/md5s.list"
+
+# $OUT shall be the prefix of the test output. Their suffix will be .out
+OUT="${OUT_DIR}/fs-test"
+
+# Full Path of the 1 MB file that shall be created in the fs image.
+MB1="${MOUNT_DIR}/${SMALL_FILE}"
+GB2p5="${MOUNT_DIR}/${BIG_FILE}"
+
+# ************************
+# * Functions start here *
+# ************************
+
+# Check if the prereq binaries exist, or exit
+function check_prereq() {
+ for prereq in $PREREQ_BINS; do
+ if [ ! -x `which $prereq` ]; then
+ echo "Missing $prereq binary. Exiting!"
+ exit
+ fi
+ done
+
+ # We use /dev/urandom to create files. Check if it exists.
+ if [ ! -c /dev/urandom ]; then
+ echo "Missing character special /dev/urandom. Exiting!"
+ exit
+ fi
+}
+
+# If 1st param is "clean", then clean out the generated files and exit
+function check_clean() {
+ if [ "$1" = "clean" ]; then
+ rm -rf "$OUT_DIR"
+ echo "Cleaned up generated files. Exiting"
+ exit
+ fi
+}
+
+# Generate sandbox U-Boot - gleaned from /test/dm/test-dm.sh
+function compile_sandbox() {
+ unset CROSS_COMPILE
+ NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor)
+ make O=sandbox sandbox_config
+ make O=sandbox -s -j${NUM_CPUS}
+
+ # Check if U-Boot exists
+ if [ ! -x "$UBOOT" ]; then
+ echo "$UBOOT does not exist or is not executable"
+ echo "Build error?"
+ echo "Please run this script as ./test/fs/`basename $0`"
+ exit
+ fi
+}
+
+# Clean out all generated files other than the file system images
+# We save time by not deleting and recreating the file system images
+function prepare_env() {
+ rm -f ${MD5_FILE}.* ${OUT}.*
+ mkdir ${OUT_DIR}
+}
+
+# 1st parameter is the name of the image file to be created
+# 2nd parameter is the filesystem - fat ext4 etc
+# -F cant be used with fat as it means something else.
+function create_image() {
+ # Create image if not already present - saves time, while debugging
+ if [ "$2" = "ext4" ]; then
+ MKFS_OPTION="-F"
+ else
+ MKFS_OPTION=""
+ fi
+ if [ ! -f "$1" ]; then
+ fallocate -l 3G "$1" &> /dev/null
+ mkfs -t "$2" $MKFS_OPTION "$1" &> /dev/null
+ if [ $? -ne 0 -a "$2" = "fat" ]; then
+ # If we fail and we did fat, try vfat.
+ mkfs -t vfat $MKFS_OPTION "$1" &> /dev/null
+ fi
+ fi
+}
+
+# 1st parameter is the FS type: fat/ext4
+# 2nd parameter is the name of small file
+# Returns filename which can be used for fat or ext4 for writing
+function fname_for_write() {
+ case $1 in
+ ext4)
+ # ext4 needs absolute path name of file
+ echo /${2}.w
+ ;;
+
+ *)
+ echo ${2}.w
+ ;;
+ esac
+}
+
+# 1st parameter is image file
+# 2nd parameter is file system type - fat/ext4
+# 3rd parameter is name of small file
+# 4th parameter is name of big file
+# 5th parameter is fs/nonfs/sb - to dictate generic fs commands or
+# otherwise or sb hostfs
+# 6th parameter is the directory path for the files. Its "" for generic
+# fs and ext4/fat and full patch for sb hostfs
+# UBOOT is set in env
+function test_image() {
+ addr="0x01000008"
+ length="0x00100000"
+
+ case "$2" in
+ fat)
+ PREFIX="fat"
+ WRITE="write"
+ ;;
+
+ ext4)
+ PREFIX="ext4"
+ WRITE="write"
+ ;;
+
+ *)
+ echo "Unhandled filesystem $2. Exiting!"
+ exit
+ ;;
+ esac
+
+ case "$5" in
+ fs)
+ PREFIX=""
+ WRITE="save"
+ SUFFIX=" 0:0"
+ ;;
+
+ nonfs)
+ SUFFIX=" 0:0"
+ ;;
+
+ sb)
+ PREFIX="sb "
+ WRITE="save"
+ SUFFIX="fs -"
+ ;;
+
+ *)
+ echo "Unhandled mode $5. Exiting!"
+ exit
+ ;;
+
+ esac
+
+ if [ -z "$6" ]; then
+ FILE_WRITE=`fname_for_write $2 $3`
+ FILE_SMALL=$3
+ FILE_BIG=$4
+ else
+ FILE_WRITE=$6/`fname_for_write $2 $3`
+ FILE_SMALL=$6/$3
+ FILE_BIG=$6/$4
+ fi
+
+ # In u-boot commands, <interface> stands for host or hostfs
+ # hostfs maps to the host fs.
+ # host maps to the "sb bind" that we do
+
+ $UBOOT << EOF
+sb=$5
+setenv bind 'if test "\$sb" != sb; then sb bind 0 "$1"; fi'
+run bind
+# Test Case 1 - ls
+${PREFIX}ls host${SUFFIX} $6
+#
+# We want ${PREFIX}size host 0:0 $3 for host commands and
+# sb size hostfs - $3 for hostfs commands.
+# 1MB is 0x0010 0000
+# Test Case 2 - size of small file
+${PREFIX}size host${SUFFIX} $FILE_SMALL
+printenv filesize
+setenv filesize
+
+# 2.5GB (1024*1024*2500) is 0x9C40 0000
+# Test Case 3 - size of big file
+${PREFIX}size host${SUFFIX} $FILE_BIG
+printenv filesize
+setenv filesize
+
+# Notes about load operation
+# If I use 0x01000000 I get DMA misaligned error message
+# Last two parameters are size and offset.
+
+# Test Case 4a - Read full 1MB of small file
+${PREFIX}load host${SUFFIX} $addr $FILE_SMALL
+printenv filesize
+# Test Case 4b - Read full 1MB of small file
+md5sum $addr \$filesize
+setenv filesize
+
+# Test Case 5a - First 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x0
+printenv filesize
+# Test Case 5b - First 1MB of big file
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 6a - Last 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x9C300000
+printenv filesize
+# Test Case 6b - Last 1MB of big file
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 7a - One from the last 1MB chunk of 2GB
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF00000
+printenv filesize
+# Test Case 7b - One from the last 1MB chunk of 2GB
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 8a - One from the start 1MB chunk from 2GB
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x80000000
+printenv filesize
+# Test Case 8b - One from the start 1MB chunk from 2GB
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 9a - One 1MB chunk crossing the 2GB boundary
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF80000
+printenv filesize
+# Test Case 9b - One 1MB chunk crossing the 2GB boundary
+md5sum $addr \$filesize
+setenv filesize
+
+# Generic failure case
+# Test Case 10 - 2MB chunk from the last 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG 0x00200000 0x9C300000
+printenv filesize
+#
+
+# Read 1MB from small file
+${PREFIX}load host${SUFFIX} $addr $FILE_SMALL
+# Write it back to test the writes
+# Test Case 11a - Check that the write succeeded
+${PREFIX}${WRITE} host${SUFFIX} $addr $FILE_WRITE \$filesize
+mw.b $addr 00 100
+${PREFIX}load host${SUFFIX} $addr $FILE_WRITE
+# Test Case 11b - Check md5 of written to is same as the one read from
+md5sum $addr \$filesize
+setenv filesize
+#
+reset
+
+EOF
+}
+
+# 1st argument is the name of the image file.
+# 2nd argument is the file where we generate the md5s of the files
+# generated with the appropriate start and length that we use to test.
+# It creates the necessary files in the image to test.
+# $GB2p5 is the path of the big file (2.5 GB)
+# $MB1 is the path of the small file (1 MB)
+# $MOUNT_DIR is the path we can use to mount the image file.
+function create_files() {
+ # Mount the image so we can populate it.
+ mkdir -p "$MOUNT_DIR"
+ sudo mount -o loop,rw "$1" "$MOUNT_DIR"
+
+ # Create big file in this image.
+ # Note that we work only on the start 1MB, couple MBs in the 2GB range
+ # and the last 1 MB of the huge 2.5GB file.
+ # So, just put random values only in those areas.
+ if [ ! -f "${GB2p5}" ]; then
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 \
+ &> /dev/null
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=2 seek=2047 \
+ &> /dev/null
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 seek=2499 \
+ &> /dev/null
+ fi
+
+ # Create a small file in this image.
+ if [ ! -f "${MB1}" ]; then
+ sudo dd if=/dev/urandom of="${MB1}" bs=1M count=1 \
+ &> /dev/null
+ fi
+
+ # Delete the small file which possibly is written as part of a
+ # previous test.
+ sudo rm -f "${MB1}.w"
+
+ # Generate the md5sums of reads that we will test against small file
+ dd if="${MB1}" bs=1M skip=0 count=1 2> /dev/null | md5sum > "$2"
+
+ # Generate the md5sums of reads that we will test against big file
+ # One from beginning of file.
+ dd if="${GB2p5}" bs=1M skip=0 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from end of file.
+ dd if="${GB2p5}" bs=1M skip=2499 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from the last 1MB chunk of 2GB
+ dd if="${GB2p5}" bs=1M skip=2047 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from the start 1MB chunk from 2GB
+ dd if="${GB2p5}" bs=1M skip=2048 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One 1MB chunk crossing the 2GB boundary
+ dd if="${GB2p5}" bs=512K skip=4095 count=2 \
+ 2> /dev/null | md5sum >> "$2"
+
+ sync
+ sudo umount "$MOUNT_DIR"
+ rmdir "$MOUNT_DIR"
+}
+
+# 1st parameter is the text to print
+# if $? is 0 its a pass, else a fail
+# As a side effect it shall update env variable PASS and FAIL
+function pass_fail() {
+ if [ $? -eq 0 ]; then
+ echo pass - "$1"
+ PASS=$((PASS + 1))
+ else
+ echo FAIL - "$1"
+ FAIL=$((FAIL + 1))
+ fi
+}
+
+# 1st parameter is the string which leads to an md5 generation
+# 2nd parameter is the file we grep, for that string
+# 3rd parameter is the name of the file which has md5s in it
+# 4th parameter is the line # in the md5 file that we match it against
+# This function checks if the md5 of the file in the sandbox matches
+# that calculated while generating the file
+# 5th parameter is the string to print with the result
+check_md5() {
+ # md5sum in u-boot has output of form:
+ # md5 for 01000008 ... 01100007 ==> <md5>
+ # the 7th field is the actual md5
+ md5_src=`grep -A3 "$1" "$2" | grep "md5 for"`
+ md5_src=($md5_src)
+ md5_src=${md5_src[6]}
+
+ # The md5 list, each line is of the form:
+ # - <md5>
+ # the 2nd field is the actual md5
+ md5_dst=`sed -n $4p $3`
+ md5_dst=($md5_dst)
+ md5_dst=${md5_dst[0]}
+
+ # For a pass they should match.
+ [ "$md5_src" = "$md5_dst" ]
+ pass_fail "$5"
+}
+
+# 1st parameter is the name of the output file to check
+# 2nd parameter is the name of the file containing the md5 expected
+# 3rd parameter is the name of the small file
+# 4th parameter is the name of the big file
+# 5th paramter is the name of the written file
+# This function checks the output file for correct results.
+function check_results() {
+ echo "** Start $1"
+
+ PASS=0
+ FAIL=0
+
+ # Check if the ls is showing correct results for 2.5 gb file
+ grep -A6 "Test Case 1 " "$1" | egrep -iq "2621440000 *$4"
+ pass_fail "TC1: ls of $4"
+
+ # Check if the ls is showing correct results for 1 mb file
+ grep -A6 "Test Case 1 " "$1" | egrep -iq "1048576 *$3"
+ pass_fail "TC1: ls of $3"
+
+ # Check size command on 1MB.file
+ egrep -A3 "Test Case 2 " "$1" | grep -q "filesize=100000"
+ pass_fail "TC2: size of $3"
+
+ # Check size command on 2.5GB.file
+ egrep -A3 "Test Case 3 " "$1" | grep -q "filesize=9c400000"
+ pass_fail "TC3: size of $4"
+
+ # Check read full mb of 1MB.file
+ grep -A6 "Test Case 4a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC4: load of $3 size"
+ check_md5 "Test Case 4b " "$1" "$2" 1 "TC4: load from $3"
+
+ # Check first mb of 2.5GB.file
+ grep -A6 "Test Case 5a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC5: load of 1st MB from $4 size"
+ check_md5 "Test Case 5b " "$1" "$2" 2 "TC5: load of 1st MB from $4"
+
+ # Check last mb of 2.5GB.file
+ grep -A6 "Test Case 6a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC6: load of last MB from $4 size"
+ check_md5 "Test Case 6b " "$1" "$2" 3 "TC6: load of last MB from $4"
+
+ # Check last 1mb chunk of 2gb from 2.5GB file
+ grep -A6 "Test Case 7a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC7: load of last 1mb chunk of 2GB from $4 size"
+ check_md5 "Test Case 7b " "$1" "$2" 4 \
+ "TC7: load of last 1mb chunk of 2GB from $4"
+
+ # Check first 1mb chunk after 2gb from 2.5GB file
+ grep -A6 "Test Case 8a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC8: load 1st MB chunk after 2GB from $4 size"
+ check_md5 "Test Case 8b " "$1" "$2" 5 \
+ "TC8: load 1st MB chunk after 2GB from $4"
+
+ # Check 1mb chunk crossing the 2gb boundary from 2.5GB file
+ grep -A6 "Test Case 9a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC9: load 1MB chunk crossing 2GB boundary from $4 size"
+ check_md5 "Test Case 9b " "$1" "$2" 6 \
+ "TC9: load 1MB chunk crossing 2GB boundary from $4"
+
+ # Check 2mb chunk from the last 1MB of 2.5GB file - generic failure case
+ grep -A6 "Test Case 10 " "$1" | grep -q 'Error: "filesize" not defined'
+ pass_fail "TC10: load 2MB from the last 1MB of $4 - generic fail case"
+
+ # Check 1mb chunk write
+ grep -A3 "Test Case 11a " "$1" | \
+ egrep -q '1048576 bytes written|update journal'
+ pass_fail "TC11: 1MB write to $5 - write succeeded"
+ check_md5 "Test Case 11b " "$1" "$2" 1 \
+ "TC11: 1MB write to $5 - content verified"
+ echo "** End $1"
+}
+
+# Takes in one parameter which is "fs" or "nonfs", which then dictates
+# if a fs test (size/load/save) or a nonfs test (fatread/extread) needs to
+# be performed.
+function test_fs_nonfs() {
+ echo "Creating files in $fs image if not already present."
+ create_files $IMAGE $MD5_FILE_FS
+
+ OUT_FILE="${OUT}.fs.${fs}.out"
+ test_image $IMAGE $fs $SMALL_FILE $BIG_FILE $1 "" \
+ > ${OUT_FILE}
+ check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \
+ $WRITE_FILE
+ TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
+ TOTAL_PASS=$((TOTAL_PASS + PASS))
+ echo "Summary: PASS: $PASS FAIL: $FAIL"
+ echo "--------------------------------------------"
+}
+
+# ********************
+# * End of functions *
+# ********************
+
+check_clean "$1"
+check_prereq
+compile_sandbox
+prepare_env
+
+# Track TOTAL_FAIL and TOTAL_PASS
+TOTAL_FAIL=0
+TOTAL_PASS=0
+
+# In each loop, for a given file system image, we test both the
+# fs command, like load/size/write, the file system specific command
+# like: ext4load/ext4size/ext4write and the sb load/ls/save commands.
+for fs in ext4 fat; do
+
+ echo "Creating $fs image if not already present."
+ IMAGE=${IMG}.${fs}.img
+ MD5_FILE_FS="${MD5_FILE}.${fs}"
+ create_image $IMAGE $fs
+
+ # sb commands test
+ echo "Creating files in $fs image if not already present."
+ create_files $IMAGE $MD5_FILE_FS
+
+ # Lets mount the image and test sb hostfs commands
+ mkdir -p "$MOUNT_DIR"
+ if [ "$fs" = "fat" ]; then
+ uid="uid=`id -u`"
+ else
+ uid=""
+ fi
+ sudo mount -o loop,rw,$uid "$IMAGE" "$MOUNT_DIR"
+ sudo chmod 777 "$MOUNT_DIR"
+
+ OUT_FILE="${OUT}.sb.${fs}.out"
+ test_image $IMAGE $fs $SMALL_FILE $BIG_FILE sb `pwd`/$MOUNT_DIR \
+ > ${OUT_FILE}
+ sudo umount "$MOUNT_DIR"
+ rmdir "$MOUNT_DIR"
+
+ check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \
+ $WRITE_FILE
+ TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
+ TOTAL_PASS=$((TOTAL_PASS + PASS))
+ echo "Summary: PASS: $PASS FAIL: $FAIL"
+ echo "--------------------------------------------"
+
+ test_fs_nonfs nonfs
+ test_fs_nonfs fs
+done
+
+echo "Total Summary: TOTAL PASS: $TOTAL_PASS TOTAL FAIL: $TOTAL_FAIL"
+echo "--------------------------------------------"
+if [ $TOTAL_FAIL -eq 0 ]; then
+ echo "PASSED"
+ exit 0
+else
+ echo "FAILED"
+ exit 1
+fi
hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
HOSTCFLAGS_mkexynosspl.o := -pedantic
+hostprogs-$(CONFIG_X86) += ifdtool
+
hostprogs-$(CONFIG_MX23) += mxsboot
hostprogs-$(CONFIG_MX28) += mxsboot
HOSTCFLAGS_mxsboot.o := -pedantic
--- /dev/null
+/*
+ * ifdtool - Manage Intel Firmware Descriptor information
+ *
+ * Copyright 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * From Coreboot project, but it got a serious code clean-up
+ * and a few new features
+ */
+
+#include <assert.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include "ifdtool.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define debug(fmt, args...) printf(fmt, ##args)
+#else
+#define debug(fmt, args...)
+#endif
+
+#define FD_SIGNATURE 0x0FF0A55A
+#define FLREG_BASE(reg) ((reg & 0x00000fff) << 12);
+#define FLREG_LIMIT(reg) (((reg & 0x0fff0000) >> 4) | 0xfff);
+
+/**
+ * find_fd() - Find the flash description in the ROM image
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @return pointer to structure, or NULL if not found
+ */
+static struct fdbar_t *find_fd(char *image, int size)
+{
+ uint32_t *ptr, *end;
+
+ /* Scan for FD signature */
+ for (ptr = (uint32_t *)image, end = ptr + size / 4; ptr < end; ptr++) {
+ if (*ptr == FD_SIGNATURE)
+ break;
+ }
+
+ if (ptr == end) {
+ printf("No Flash Descriptor found in this image\n");
+ return NULL;
+ }
+
+ debug("Found Flash Descriptor signature at 0x%08x\n", i);
+
+ return (struct fdbar_t *)ptr;
+}
+
+/**
+ * get_region() - Get information about the selected region
+ *
+ * @frba: Flash region list
+ * @region_type: Type of region (0..MAX_REGIONS-1)
+ * @region: Region information is written here
+ * @return 0 if OK, else -ve
+ */
+static int get_region(struct frba_t *frba, int region_type,
+ struct region_t *region)
+{
+ if (region_type >= MAX_REGIONS) {
+ fprintf(stderr, "Invalid region type.\n");
+ return -1;
+ }
+
+ region->base = FLREG_BASE(frba->flreg[region_type]);
+ region->limit = FLREG_LIMIT(frba->flreg[region_type]);
+ region->size = region->limit - region->base + 1;
+
+ return 0;
+}
+
+static const char *region_name(int region_type)
+{
+ static const char *const regions[] = {
+ "Flash Descriptor",
+ "BIOS",
+ "Intel ME",
+ "GbE",
+ "Platform Data"
+ };
+
+ assert(region_type < MAX_REGIONS);
+
+ return regions[region_type];
+}
+
+static const char *region_filename(int region_type)
+{
+ static const char *const region_filenames[] = {
+ "flashregion_0_flashdescriptor.bin",
+ "flashregion_1_bios.bin",
+ "flashregion_2_intel_me.bin",
+ "flashregion_3_gbe.bin",
+ "flashregion_4_platform_data.bin"
+ };
+
+ assert(region_type < MAX_REGIONS);
+
+ return region_filenames[region_type];
+}
+
+static int dump_region(int num, struct frba_t *frba)
+{
+ struct region_t region;
+ int ret;
+
+ ret = get_region(frba, num, ®ion);
+ if (ret)
+ return ret;
+
+ printf(" Flash Region %d (%s): %08x - %08x %s\n",
+ num, region_name(num), region.base, region.limit,
+ region.size < 1 ? "(unused)" : "");
+
+ return ret;
+}
+
+static void dump_frba(struct frba_t *frba)
+{
+ int i;
+
+ printf("Found Region Section\n");
+ for (i = 0; i < MAX_REGIONS; i++) {
+ printf("FLREG%d: 0x%08x\n", i, frba->flreg[i]);
+ dump_region(i, frba);
+ }
+}
+
+static void decode_spi_frequency(unsigned int freq)
+{
+ switch (freq) {
+ case SPI_FREQUENCY_20MHZ:
+ printf("20MHz");
+ break;
+ case SPI_FREQUENCY_33MHZ:
+ printf("33MHz");
+ break;
+ case SPI_FREQUENCY_50MHZ:
+ printf("50MHz");
+ break;
+ default:
+ printf("unknown<%x>MHz", freq);
+ }
+}
+
+static void decode_component_density(unsigned int density)
+{
+ switch (density) {
+ case COMPONENT_DENSITY_512KB:
+ printf("512KiB");
+ break;
+ case COMPONENT_DENSITY_1MB:
+ printf("1MiB");
+ break;
+ case COMPONENT_DENSITY_2MB:
+ printf("2MiB");
+ break;
+ case COMPONENT_DENSITY_4MB:
+ printf("4MiB");
+ break;
+ case COMPONENT_DENSITY_8MB:
+ printf("8MiB");
+ break;
+ case COMPONENT_DENSITY_16MB:
+ printf("16MiB");
+ break;
+ default:
+ printf("unknown<%x>MiB", density);
+ }
+}
+
+static void dump_fcba(struct fcba_t *fcba)
+{
+ printf("\nFound Component Section\n");
+ printf("FLCOMP 0x%08x\n", fcba->flcomp);
+ printf(" Dual Output Fast Read Support: %ssupported\n",
+ (fcba->flcomp & (1 << 30)) ? "" : "not ");
+ printf(" Read ID/Read Status Clock Frequency: ");
+ decode_spi_frequency((fcba->flcomp >> 27) & 7);
+ printf("\n Write/Erase Clock Frequency: ");
+ decode_spi_frequency((fcba->flcomp >> 24) & 7);
+ printf("\n Fast Read Clock Frequency: ");
+ decode_spi_frequency((fcba->flcomp >> 21) & 7);
+ printf("\n Fast Read Support: %ssupported",
+ (fcba->flcomp & (1 << 20)) ? "" : "not ");
+ printf("\n Read Clock Frequency: ");
+ decode_spi_frequency((fcba->flcomp >> 17) & 7);
+ printf("\n Component 2 Density: ");
+ decode_component_density((fcba->flcomp >> 3) & 7);
+ printf("\n Component 1 Density: ");
+ decode_component_density(fcba->flcomp & 7);
+ printf("\n");
+ printf("FLILL 0x%08x\n", fcba->flill);
+ printf(" Invalid Instruction 3: 0x%02x\n",
+ (fcba->flill >> 24) & 0xff);
+ printf(" Invalid Instruction 2: 0x%02x\n",
+ (fcba->flill >> 16) & 0xff);
+ printf(" Invalid Instruction 1: 0x%02x\n",
+ (fcba->flill >> 8) & 0xff);
+ printf(" Invalid Instruction 0: 0x%02x\n",
+ fcba->flill & 0xff);
+ printf("FLPB 0x%08x\n", fcba->flpb);
+ printf(" Flash Partition Boundary Address: 0x%06x\n\n",
+ (fcba->flpb & 0xfff) << 12);
+}
+
+static void dump_fpsba(struct fpsba_t *fpsba)
+{
+ int i;
+
+ printf("Found PCH Strap Section\n");
+ for (i = 0; i < MAX_STRAPS; i++)
+ printf("PCHSTRP%-2d: 0x%08x\n", i, fpsba->pchstrp[i]);
+}
+
+static const char *get_enabled(int flag)
+{
+ return flag ? "enabled" : "disabled";
+}
+
+static void decode_flmstr(uint32_t flmstr)
+{
+ printf(" Platform Data Region Write Access: %s\n",
+ get_enabled(flmstr & (1 << 28)));
+ printf(" GbE Region Write Access: %s\n",
+ get_enabled(flmstr & (1 << 27)));
+ printf(" Intel ME Region Write Access: %s\n",
+ get_enabled(flmstr & (1 << 26)));
+ printf(" Host CPU/BIOS Region Write Access: %s\n",
+ get_enabled(flmstr & (1 << 25)));
+ printf(" Flash Descriptor Write Access: %s\n",
+ get_enabled(flmstr & (1 << 24)));
+
+ printf(" Platform Data Region Read Access: %s\n",
+ get_enabled(flmstr & (1 << 20)));
+ printf(" GbE Region Read Access: %s\n",
+ get_enabled(flmstr & (1 << 19)));
+ printf(" Intel ME Region Read Access: %s\n",
+ get_enabled(flmstr & (1 << 18)));
+ printf(" Host CPU/BIOS Region Read Access: %s\n",
+ get_enabled(flmstr & (1 << 17)));
+ printf(" Flash Descriptor Read Access: %s\n",
+ get_enabled(flmstr & (1 << 16)));
+
+ printf(" Requester ID: 0x%04x\n\n",
+ flmstr & 0xffff);
+}
+
+static void dump_fmba(struct fmba_t *fmba)
+{
+ printf("Found Master Section\n");
+ printf("FLMSTR1: 0x%08x (Host CPU/BIOS)\n", fmba->flmstr1);
+ decode_flmstr(fmba->flmstr1);
+ printf("FLMSTR2: 0x%08x (Intel ME)\n", fmba->flmstr2);
+ decode_flmstr(fmba->flmstr2);
+ printf("FLMSTR3: 0x%08x (GbE)\n", fmba->flmstr3);
+ decode_flmstr(fmba->flmstr3);
+}
+
+static void dump_fmsba(struct fmsba_t *fmsba)
+{
+ int i;
+
+ printf("Found Processor Strap Section\n");
+ for (i = 0; i < 4; i++)
+ printf("????: 0x%08x\n", fmsba->data[0]);
+}
+
+static void dump_jid(uint32_t jid)
+{
+ printf(" SPI Component Device ID 1: 0x%02x\n",
+ (jid >> 16) & 0xff);
+ printf(" SPI Component Device ID 0: 0x%02x\n",
+ (jid >> 8) & 0xff);
+ printf(" SPI Component Vendor ID: 0x%02x\n",
+ jid & 0xff);
+}
+
+static void dump_vscc(uint32_t vscc)
+{
+ printf(" Lower Erase Opcode: 0x%02x\n",
+ vscc >> 24);
+ printf(" Lower Write Enable on Write Status: 0x%02x\n",
+ vscc & (1 << 20) ? 0x06 : 0x50);
+ printf(" Lower Write Status Required: %s\n",
+ vscc & (1 << 19) ? "Yes" : "No");
+ printf(" Lower Write Granularity: %d bytes\n",
+ vscc & (1 << 18) ? 64 : 1);
+ printf(" Lower Block / Sector Erase Size: ");
+ switch ((vscc >> 16) & 0x3) {
+ case 0:
+ printf("256 Byte\n");
+ break;
+ case 1:
+ printf("4KB\n");
+ break;
+ case 2:
+ printf("8KB\n");
+ break;
+ case 3:
+ printf("64KB\n");
+ break;
+ }
+
+ printf(" Upper Erase Opcode: 0x%02x\n",
+ (vscc >> 8) & 0xff);
+ printf(" Upper Write Enable on Write Status: 0x%02x\n",
+ vscc & (1 << 4) ? 0x06 : 0x50);
+ printf(" Upper Write Status Required: %s\n",
+ vscc & (1 << 3) ? "Yes" : "No");
+ printf(" Upper Write Granularity: %d bytes\n",
+ vscc & (1 << 2) ? 64 : 1);
+ printf(" Upper Block / Sector Erase Size: ");
+ switch (vscc & 0x3) {
+ case 0:
+ printf("256 Byte\n");
+ break;
+ case 1:
+ printf("4KB\n");
+ break;
+ case 2:
+ printf("8KB\n");
+ break;
+ case 3:
+ printf("64KB\n");
+ break;
+ }
+}
+
+static void dump_vtba(struct vtba_t *vtba, int vtl)
+{
+ int i;
+ int num = (vtl >> 1) < 8 ? (vtl >> 1) : 8;
+
+ printf("ME VSCC table:\n");
+ for (i = 0; i < num; i++) {
+ printf(" JID%d: 0x%08x\n", i, vtba->entry[i].jid);
+ dump_jid(vtba->entry[i].jid);
+ printf(" VSCC%d: 0x%08x\n", i, vtba->entry[i].vscc);
+ dump_vscc(vtba->entry[i].vscc);
+ }
+ printf("\n");
+}
+
+static void dump_oem(uint8_t *oem)
+{
+ int i, j;
+ printf("OEM Section:\n");
+ for (i = 0; i < 4; i++) {
+ printf("%02x:", i << 4);
+ for (j = 0; j < 16; j++)
+ printf(" %02x", oem[(i<<4)+j]);
+ printf("\n");
+ }
+ printf("\n");
+}
+
+/**
+ * dump_fd() - Display a dump of the full flash description
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @return 0 if OK, -1 on error
+ */
+static int dump_fd(char *image, int size)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+
+ if (!fdb)
+ return -1;
+
+ printf("FLMAP0: 0x%08x\n", fdb->flmap0);
+ printf(" NR: %d\n", (fdb->flmap0 >> 24) & 7);
+ printf(" FRBA: 0x%x\n", ((fdb->flmap0 >> 16) & 0xff) << 4);
+ printf(" NC: %d\n", ((fdb->flmap0 >> 8) & 3) + 1);
+ printf(" FCBA: 0x%x\n", ((fdb->flmap0) & 0xff) << 4);
+
+ printf("FLMAP1: 0x%08x\n", fdb->flmap1);
+ printf(" ISL: 0x%02x\n", (fdb->flmap1 >> 24) & 0xff);
+ printf(" FPSBA: 0x%x\n", ((fdb->flmap1 >> 16) & 0xff) << 4);
+ printf(" NM: %d\n", (fdb->flmap1 >> 8) & 3);
+ printf(" FMBA: 0x%x\n", ((fdb->flmap1) & 0xff) << 4);
+
+ printf("FLMAP2: 0x%08x\n", fdb->flmap2);
+ printf(" PSL: 0x%04x\n", (fdb->flmap2 >> 8) & 0xffff);
+ printf(" FMSBA: 0x%x\n", ((fdb->flmap2) & 0xff) << 4);
+
+ printf("FLUMAP1: 0x%08x\n", fdb->flumap1);
+ printf(" Intel ME VSCC Table Length (VTL): %d\n",
+ (fdb->flumap1 >> 8) & 0xff);
+ printf(" Intel ME VSCC Table Base Address (VTBA): 0x%06x\n\n",
+ (fdb->flumap1 & 0xff) << 4);
+ dump_vtba((struct vtba_t *)
+ (image + ((fdb->flumap1 & 0xff) << 4)),
+ (fdb->flumap1 >> 8) & 0xff);
+ dump_oem((uint8_t *)image + 0xf00);
+ dump_frba((struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff)
+ << 4)));
+ dump_fcba((struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4)));
+ dump_fpsba((struct fpsba_t *)
+ (image + (((fdb->flmap1 >> 16) & 0xff) << 4)));
+ dump_fmba((struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4)));
+ dump_fmsba((struct fmsba_t *)(image + (((fdb->flmap2) & 0xff) << 4)));
+
+ return 0;
+}
+
+/**
+ * write_regions() - Write each region from an image to its own file
+ *
+ * The filename to use in each case is fixed - see region_filename()
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @return 0 if OK, -ve on error
+ */
+static int write_regions(char *image, int size)
+{
+ struct fdbar_t *fdb;
+ struct frba_t *frba;
+ int ret = 0;
+ int i;
+
+ fdb = find_fd(image, size);
+ if (!fdb)
+ return -1;
+
+ frba = (struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff) << 4));
+
+ for (i = 0; i < MAX_REGIONS; i++) {
+ struct region_t region;
+ int region_fd;
+
+ ret = get_region(frba, i, ®ion);
+ if (ret)
+ return ret;
+ dump_region(i, frba);
+ if (region.size == 0)
+ continue;
+ region_fd = open(region_filename(i),
+ O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR |
+ S_IWUSR | S_IRGRP | S_IROTH);
+ if (write(region_fd, image + region.base, region.size) !=
+ region.size) {
+ perror("Error while writing");
+ ret = -1;
+ }
+ close(region_fd);
+ }
+
+ return ret;
+}
+
+/**
+ * write_image() - Write the image to a file
+ *
+ * @filename: Filename to use for the image
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @return 0 if OK, -ve on error
+ */
+static int write_image(char *filename, char *image, int size)
+{
+ int new_fd;
+
+ debug("Writing new image to %s\n", filename);
+
+ new_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR |
+ S_IWUSR | S_IRGRP | S_IROTH);
+ if (write(new_fd, image, size) != size) {
+ perror("Error while writing");
+ return -1;
+ }
+ close(new_fd);
+
+ return 0;
+}
+
+/**
+ * set_spi_frequency() - Set the SPI frequency to use when booting
+ *
+ * Several frequencies are supported, some of which work with fast devices.
+ * For SPI emulators, the slowest (SPI_FREQUENCY_20MHZ) is often used. The
+ * Intel boot system uses this information somehow on boot.
+ *
+ * The image is updated with the supplied value
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @freq: SPI frequency to use
+ */
+static void set_spi_frequency(char *image, int size, enum spi_frequency freq)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+ struct fcba_t *fcba;
+
+ fcba = (struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4));
+
+ /* clear bits 21-29 */
+ fcba->flcomp &= ~0x3fe00000;
+ /* Read ID and Read Status Clock Frequency */
+ fcba->flcomp |= freq << 27;
+ /* Write and Erase Clock Frequency */
+ fcba->flcomp |= freq << 24;
+ /* Fast Read Clock Frequency */
+ fcba->flcomp |= freq << 21;
+}
+
+/**
+ * set_em100_mode() - Set a SPI frequency that will work with Dediprog EM100
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ */
+static void set_em100_mode(char *image, int size)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+ struct fcba_t *fcba;
+
+ fcba = (struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4));
+ fcba->flcomp &= ~(1 << 30);
+ set_spi_frequency(image, size, SPI_FREQUENCY_20MHZ);
+}
+
+/**
+ * lock_descriptor() - Lock the NE descriptor so it cannot be updated
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ */
+static void lock_descriptor(char *image, int size)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+ struct fmba_t *fmba;
+
+ /*
+ * TODO: Dynamically take Platform Data Region and GbE Region into
+ * account.
+ */
+ fmba = (struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4));
+ fmba->flmstr1 = 0x0a0b0000;
+ fmba->flmstr2 = 0x0c0d0000;
+ fmba->flmstr3 = 0x08080118;
+}
+
+/**
+ * unlock_descriptor() - Lock the NE descriptor so it can be updated
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ */
+static void unlock_descriptor(char *image, int size)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+ struct fmba_t *fmba;
+
+ fmba = (struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4));
+ fmba->flmstr1 = 0xffff0000;
+ fmba->flmstr2 = 0xffff0000;
+ fmba->flmstr3 = 0x08080118;
+}
+
+/**
+ * open_for_read() - Open a file for reading
+ *
+ * @fname: Filename to open
+ * @sizep: Returns file size in bytes
+ * @return 0 if OK, -1 on error
+ */
+int open_for_read(const char *fname, int *sizep)
+{
+ int fd = open(fname, O_RDONLY);
+ struct stat buf;
+
+ if (fd == -1) {
+ perror("Could not open file");
+ return -1;
+ }
+ if (fstat(fd, &buf) == -1) {
+ perror("Could not stat file");
+ return -1;
+ }
+ *sizep = buf.st_size;
+ debug("File %s is %d bytes\n", fname, *sizep);
+
+ return fd;
+}
+
+/**
+ * inject_region() - Add a file to an image region
+ *
+ * This puts a file into a particular region of the flash. Several pre-defined
+ * regions are used.
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @region_type: Region where the file should be added
+ * @region_fname: Filename to add to the image
+ * @return 0 if OK, -ve on error
+ */
+int inject_region(char *image, int size, int region_type, char *region_fname)
+{
+ struct fdbar_t *fdb = find_fd(image, size);
+ struct region_t region;
+ struct frba_t *frba;
+ int region_size;
+ int offset = 0;
+ int region_fd;
+ int ret;
+
+ if (!fdb)
+ exit(EXIT_FAILURE);
+ frba = (struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff) << 4));
+
+ ret = get_region(frba, region_type, ®ion);
+ if (ret)
+ return -1;
+ if (region.size <= 0xfff) {
+ fprintf(stderr, "Region %s is disabled in target. Not injecting.\n",
+ region_name(region_type));
+ return -1;
+ }
+
+ region_fd = open_for_read(region_fname, ®ion_size);
+ if (region_fd < 0)
+ return region_fd;
+
+ if ((region_size > region.size) ||
+ ((region_type != 1) && (region_size > region.size))) {
+ fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x) bytes. Not injecting.\n",
+ region_name(region_type), region.size,
+ region.size, region_size, region_size);
+ return -1;
+ }
+
+ if ((region_type == 1) && (region_size < region.size)) {
+ fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x) bytes. Padding before injecting.\n",
+ region_name(region_type), region.size,
+ region.size, region_size, region_size);
+ offset = region.size - region_size;
+ memset(image + region.base, 0xff, offset);
+ }
+
+ if (size < region.base + offset + region_size) {
+ fprintf(stderr, "Output file is too small. (%d < %d)\n",
+ size, region.base + offset + region_size);
+ return -1;
+ }
+
+ if (read(region_fd, image + region.base + offset, region_size)
+ != region_size) {
+ perror("Could not read file");
+ return -1;
+ }
+
+ close(region_fd);
+
+ debug("Adding %s as the %s section\n", region_fname,
+ region_name(region_type));
+
+ return 0;
+}
+
+/**
+ * write_data() - Write some raw data into a region
+ *
+ * This puts a file into a particular place in the flash, ignoring the
+ * regions. Be careful not to overwrite something important.
+ *
+ * @image: Pointer to image
+ * @size: Size of image in bytes
+ * @addr: x86 ROM address to put file. The ROM ends at
+ * 0xffffffff so use an address relative to that. For an
+ * 8MB ROM the start address is 0xfff80000.
+ * @write_fname: Filename to add to the image
+ * @return 0 if OK, -ve on error
+ */
+static int write_data(char *image, int size, unsigned int addr,
+ const char *write_fname)
+{
+ int write_fd, write_size;
+ int offset;
+
+ write_fd = open_for_read(write_fname, &write_size);
+ if (write_fd < 0)
+ return write_fd;
+
+ offset = addr + size;
+ debug("Writing %s to offset %#x\n", write_fname, offset);
+
+ if (offset < 0 || offset + write_size > size) {
+ fprintf(stderr, "Output file is too small. (%d < %d)\n",
+ size, offset + write_size);
+ return -1;
+ }
+
+ if (read(write_fd, image + offset, write_size) != write_size) {
+ perror("Could not read file");
+ return -1;
+ }
+
+ close(write_fd);
+
+ return 0;
+}
+
+static void print_version(void)
+{
+ printf("ifdtool v%s -- ", IFDTOOL_VERSION);
+ printf("Copyright (C) 2014 Google Inc.\n\n");
+ printf("SPDX-License-Identifier: GPL-2.0+\n");
+}
+
+static void print_usage(const char *name)
+{
+ printf("usage: %s [-vhdix?] <filename> [<outfile>]\n", name);
+ printf("\n"
+ " -d | --dump: dump intel firmware descriptor\n"
+ " -x | --extract: extract intel fd modules\n"
+ " -i | --inject <region>:<module> inject file <module> into region <region>\n"
+ " -w | --write <addr>:<file> write file to appear at memory address <addr>\n"
+ " -s | --spifreq <20|33|50> set the SPI frequency\n"
+ " -e | --em100 set SPI frequency to 20MHz and disable\n"
+ " Dual Output Fast Read Support\n"
+ " -l | --lock Lock firmware descriptor and ME region\n"
+ " -u | --unlock Unlock firmware descriptor and ME region\n"
+ " -r | --romsize Specify ROM size\n"
+ " -D | --write-descriptor <file> Write descriptor at base\n"
+ " -c | --create Create a new empty image\n"
+ " -v | --version: print the version\n"
+ " -h | --help: print this help\n\n"
+ "<region> is one of Descriptor, BIOS, ME, GbE, Platform\n"
+ "\n");
+}
+
+/**
+ * get_two_words() - Convert a string into two words separated by :
+ *
+ * The supplied string is split at ':', two substrings are allocated and
+ * returned.
+ *
+ * @str: String to split
+ * @firstp: Returns first string
+ * @secondp: Returns second string
+ * @return 0 if OK, -ve if @str does not have a :
+ */
+static int get_two_words(const char *str, char **firstp, char **secondp)
+{
+ const char *p;
+
+ p = strchr(str, ':');
+ if (!p)
+ return -1;
+ *firstp = strdup(str);
+ (*firstp)[p - str] = '\0';
+ *secondp = strdup(p + 1);
+
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ int opt, option_index = 0;
+ int mode_dump = 0, mode_extract = 0, mode_inject = 0;
+ int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0;
+ int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0;
+ int create = 0;
+ char *region_type_string = NULL, *src_fname = NULL;
+ char *addr_str = NULL;
+ int region_type = -1, inputfreq = 0;
+ enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ;
+ unsigned int addr = 0;
+ int rom_size = -1;
+ bool write_it;
+ char *filename;
+ char *outfile = NULL;
+ struct stat buf;
+ int size = 0;
+ int bios_fd;
+ char *image;
+ int ret;
+ static struct option long_options[] = {
+ {"create", 0, NULL, 'c'},
+ {"dump", 0, NULL, 'd'},
+ {"descriptor", 1, NULL, 'D'},
+ {"em100", 0, NULL, 'e'},
+ {"extract", 0, NULL, 'x'},
+ {"inject", 1, NULL, 'i'},
+ {"lock", 0, NULL, 'l'},
+ {"romsize", 1, NULL, 'r'},
+ {"spifreq", 1, NULL, 's'},
+ {"unlock", 0, NULL, 'u'},
+ {"write", 1, NULL, 'w'},
+ {"version", 0, NULL, 'v'},
+ {"help", 0, NULL, 'h'},
+ {0, 0, 0, 0}
+ };
+
+ while ((opt = getopt_long(argc, argv, "cdD:ehi:lr:s:uvw:x?",
+ long_options, &option_index)) != EOF) {
+ switch (opt) {
+ case 'c':
+ create = 1;
+ break;
+ case 'd':
+ mode_dump = 1;
+ break;
+ case 'D':
+ mode_write_descriptor = 1;
+ src_fname = optarg;
+ break;
+ case 'e':
+ mode_em100 = 1;
+ break;
+ case 'i':
+ if (get_two_words(optarg, ®ion_type_string,
+ &src_fname)) {
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ if (!strcasecmp("Descriptor", region_type_string))
+ region_type = 0;
+ else if (!strcasecmp("BIOS", region_type_string))
+ region_type = 1;
+ else if (!strcasecmp("ME", region_type_string))
+ region_type = 2;
+ else if (!strcasecmp("GbE", region_type_string))
+ region_type = 3;
+ else if (!strcasecmp("Platform", region_type_string))
+ region_type = 4;
+ if (region_type == -1) {
+ fprintf(stderr, "No such region type: '%s'\n\n",
+ region_type_string);
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ mode_inject = 1;
+ break;
+ case 'l':
+ mode_locked = 1;
+ break;
+ case 'r':
+ rom_size = strtol(optarg, NULL, 0);
+ debug("ROM size %d\n", rom_size);
+ break;
+ case 's':
+ /* Parse the requested SPI frequency */
+ inputfreq = strtol(optarg, NULL, 0);
+ switch (inputfreq) {
+ case 20:
+ spifreq = SPI_FREQUENCY_20MHZ;
+ break;
+ case 33:
+ spifreq = SPI_FREQUENCY_33MHZ;
+ break;
+ case 50:
+ spifreq = SPI_FREQUENCY_50MHZ;
+ break;
+ default:
+ fprintf(stderr, "Invalid SPI Frequency: %d\n",
+ inputfreq);
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ mode_spifreq = 1;
+ break;
+ case 'u':
+ mode_unlocked = 1;
+ break;
+ case 'v':
+ print_version();
+ exit(EXIT_SUCCESS);
+ break;
+ case 'w':
+ mode_write = 1;
+ if (get_two_words(optarg, &addr_str, &src_fname)) {
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ addr = strtol(optarg, NULL, 0);
+ break;
+ case 'x':
+ mode_extract = 1;
+ break;
+ case 'h':
+ case '?':
+ default:
+ print_usage(argv[0]);
+ exit(EXIT_SUCCESS);
+ break;
+ }
+ }
+
+ if (mode_locked == 1 && mode_unlocked == 1) {
+ fprintf(stderr, "Locking/Unlocking FD and ME are mutually exclusive\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (mode_inject == 1 && mode_write == 1) {
+ fprintf(stderr, "Inject/Write are mutually exclusive\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if ((mode_dump + mode_extract + mode_inject +
+ (mode_spifreq | mode_em100 | mode_unlocked |
+ mode_locked)) > 1) {
+ fprintf(stderr, "You may not specify more than one mode.\n\n");
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+
+ if ((mode_dump + mode_extract + mode_inject + mode_spifreq +
+ mode_em100 + mode_locked + mode_unlocked + mode_write +
+ mode_write_descriptor) == 0 && !create) {
+ fprintf(stderr, "You need to specify a mode.\n\n");
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+
+ if (create && rom_size == -1) {
+ fprintf(stderr, "You need to specify a rom size when creating.\n\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (optind + 1 != argc) {
+ fprintf(stderr, "You need to specify a file.\n\n");
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+
+ filename = argv[optind];
+ if (optind + 2 != argc)
+ outfile = argv[optind + 1];
+
+ if (create)
+ bios_fd = open(filename, O_WRONLY | O_CREAT, 0666);
+ else
+ bios_fd = open(filename, outfile ? O_RDONLY : O_RDWR);
+
+ if (bios_fd == -1) {
+ perror("Could not open file");
+ exit(EXIT_FAILURE);
+ }
+
+ if (!create) {
+ if (fstat(bios_fd, &buf) == -1) {
+ perror("Could not stat file");
+ exit(EXIT_FAILURE);
+ }
+ size = buf.st_size;
+ }
+
+ debug("File %s is %d bytes\n", filename, size);
+
+ if (rom_size == -1)
+ rom_size = size;
+
+ image = malloc(rom_size);
+ if (!image) {
+ printf("Out of memory.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ memset(image, '\xff', rom_size);
+ if (!create && read(bios_fd, image, size) != size) {
+ perror("Could not read file");
+ exit(EXIT_FAILURE);
+ }
+ if (size != rom_size) {
+ debug("ROM size changed to %d bytes\n", rom_size);
+ size = rom_size;
+ }
+
+ write_it = true;
+ ret = 0;
+ if (mode_dump) {
+ ret = dump_fd(image, size);
+ write_it = false;
+ }
+
+ if (mode_extract) {
+ ret = write_regions(image, size);
+ write_it = false;
+ }
+
+ if (mode_write_descriptor)
+ ret = write_data(image, size, -size, src_fname);
+
+ if (mode_inject)
+ ret = inject_region(image, size, region_type, src_fname);
+
+ if (mode_write)
+ ret = write_data(image, size, addr, src_fname);
+
+ if (mode_spifreq)
+ set_spi_frequency(image, size, spifreq);
+
+ if (mode_em100)
+ set_em100_mode(image, size);
+
+ if (mode_locked)
+ lock_descriptor(image, size);
+
+ if (mode_unlocked)
+ unlock_descriptor(image, size);
+
+ if (write_it) {
+ if (outfile) {
+ ret = write_image(outfile, image, size);
+ } else {
+ if (lseek(bios_fd, 0, SEEK_SET)) {
+ perror("Error while seeking");
+ ret = -1;
+ }
+ if (write(bios_fd, image, size) != size) {
+ perror("Error while writing");
+ ret = -1;
+ }
+ }
+ }
+
+ free(image);
+ close(bios_fd);
+
+ return ret ? 1 : 0;
+}
--- /dev/null
+/*
+ * ifdtool - Manage Intel Firmware Descriptor information
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * From Coreboot project
+ */
+
+#include <stdint.h>
+
+#define __packed __attribute__((packed))
+
+#define IFDTOOL_VERSION "1.1-U-Boot"
+
+enum spi_frequency {
+ SPI_FREQUENCY_20MHZ = 0,
+ SPI_FREQUENCY_33MHZ = 1,
+ SPI_FREQUENCY_50MHZ = 4,
+};
+
+enum component_density {
+ COMPONENT_DENSITY_512KB = 0,
+ COMPONENT_DENSITY_1MB = 1,
+ COMPONENT_DENSITY_2MB = 2,
+ COMPONENT_DENSITY_4MB = 3,
+ COMPONENT_DENSITY_8MB = 4,
+ COMPONENT_DENSITY_16MB = 5,
+};
+
+/* flash descriptor */
+struct __packed fdbar_t {
+ uint32_t flvalsig;
+ uint32_t flmap0;
+ uint32_t flmap1;
+ uint32_t flmap2;
+ uint8_t reserved[0xefc - 0x20];
+ uint32_t flumap1;
+};
+
+#define MAX_REGIONS 5
+
+/* regions */
+struct __packed frba_t {
+ uint32_t flreg[MAX_REGIONS];
+};
+
+/* component section */
+struct __packed fcba_t {
+ uint32_t flcomp;
+ uint32_t flill;
+ uint32_t flpb;
+};
+
+#define MAX_STRAPS 18
+
+/* pch strap */
+struct __packed fpsba_t {
+ uint32_t pchstrp[MAX_STRAPS];
+};
+
+/* master */
+struct __packed fmba_t {
+ uint32_t flmstr1;
+ uint32_t flmstr2;
+ uint32_t flmstr3;
+};
+
+/* processor strap */
+struct __packed fmsba_t {
+ uint32_t data[8];
+};
+
+/* ME VSCC */
+struct vscc_t {
+ uint32_t jid;
+ uint32_t vscc;
+};
+
+struct vtba_t {
+ /* Actual number of entries specified in vtl */
+ struct vscc_t entry[8];
+};
+
+struct region_t {
+ int base, limit, size;
+};
unsigned int in_section:1;
unsigned int in_dcd:1;
/* Image configuration */
- unsigned int verbose_boot:1;
+ unsigned int display_progress:1;
unsigned int silent_dump:1;
char *input_filename;
char *output_filename;
sizeof(struct sb_sections_header) / SB_BLOCK_SIZE;
hdr->timestamp_us = sb_get_timestamp() * 1000000;
- /* FIXME -- add proper config option */
- hdr->flags = ictx->verbose_boot ? SB_IMAGE_FLAG_VERBOSE : 0,
+ hdr->flags = ictx->display_progress ?
+ SB_IMAGE_FLAG_DISPLAY_PROGRESS : 0;
/* FIXME -- We support only default key */
hdr->key_count = 1;
{
char *tok;
char *line = cmd->cmd;
- char *rptr;
+ char *rptr = NULL;
int ret;
/* Analyze the identifier on this line first. */
cmd->cmd = rptr;
+ /* set DISPLAY_PROGRESS flag */
+ if (!strcmp(tok, "DISPLAYPROGRESS")) {
+ ictx->display_progress = 1;
+ return 0;
+ }
+
/* DCD */
if (!strcmp(tok, "DCD")) {
ictx->in_section = 0;
ntohs(hdr->component_version.minor),
ntohs(hdr->component_version.revision));
- if (hdr->flags & ~SB_IMAGE_FLAG_VERBOSE)
+ if (hdr->flags & ~SB_IMAGE_FLAGS_MASK)
ret = -EINVAL;
soprintf(ictx, "%s Image flags: %s\n", stat[!!ret],
- hdr->flags & SB_IMAGE_FLAG_VERBOSE ? "Verbose_boot" : "");
+ hdr->flags & SB_IMAGE_FLAG_DISPLAY_PROGRESS ?
+ "Display_progress" : "");
if (ret)
return ret;
ctx.cfg_filename = params->imagename;
ctx.output_filename = params->imagefile;
- ctx.verbose_boot = 1;
ret = sb_build_tree_from_cfg(&ctx);
if (ret)
#define SB_VERSION_MAJOR 1
#define SB_VERSION_MINOR 1
-/* Enable to HTLLC verbose boot report. */
-#define SB_IMAGE_FLAG_VERBOSE (1 << 0)
+/* Enable to HTLLC boot report. */
+#define SB_IMAGE_FLAG_DISPLAY_PROGRESS (1 << 0)
+#define SB_IMAGE_FLAGS_MASK SB_IMAGE_FLAG_DISPLAY_PROGRESS
struct sb_key_dictionary_key {
/* The CBC-MAC of image and sections header. */
projects / karo-tx-uboot.git / commitdiff