smdk2400 ARM920T
trab ARM920T
+Matthias Kaehlcke <matthias@kaehlcke.net>
+ edb9301 ARM920T (EP9301)
+ edb9302 ARM920T (EP9302)
+ edb9302a ARM920T (EP9302)
+ edb9307 ARM920T (EP9307)
+ edb9307a ARM920T (EP9307)
+ edb9312 ARM920T (EP9312)
+ edb9315 ARM920T (EP9315)
+ edb9315a ARM920T (EP9315)
+
Konstantin Kletschke <kletschke@synertronixx.de>
scb9328 ARM920T
cp946es \
cp966 \
da830evm \
+ edb9301 \
+ edb9302 \
+ edb9302a \
+ edb9307 \
+ edb9307a \
+ edb9312 \
+ edb9315 \
+ edb9315a \
imx27lite \
lpd7a400 \
mv88f6281gtw_ge \
vme8349_config: unconfig
@$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
+edb9301_config \
+edb9302_config \
+edb9302a_config \
+edb9307_config \
+edb9307a_config \
+edb9312_config \
+edb9315_config \
+edb9315a_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
+
#########################################################################
## MPC85xx Systems
#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+LDSCRIPT := $(SRCTREE)/cpu/arm920t/ep93xx/u-boot.lds
+
+ifdef CONFIG_EDB9301
+TEXT_BASE = 0x05700000
+endif
+
+ifdef CONFIG_EDB9302
+TEXT_BASE = 0x05700000
+endif
+
+ifdef CONFIG_EDB9302A
+TEXT_BASE = 0xc5700000
+endif
+
+ifdef CONFIG_EDB9307
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9307A
+TEXT_BASE = 0xc1f00000
+endif
+
+ifdef CONFIG_EDB9312
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9315
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9315A
+TEXT_BASE = 0xc1f00000
+endif
--- /dev/null
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* delay execution before timers are initialized */
+static inline void early_udelay(uint32_t usecs)
+{
+ /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */
+ register uint32_t loops = (usecs * 1000) / 20;
+
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * (C) Copyright 2002 2003
+ * Network Audio Technologies, Inc. <www.netaudiotech.com>
+ * Adam Bezanson <bezanson@netaudiotech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_BANK_SIZE 0x04000000 /* 64 MB */
+
+static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
+ PHYS_SDRAM_1,
+#ifdef PHYS_SDRAM_2
+ PHYS_SDRAM_2,
+#endif
+#ifdef PHYS_SDRAM_3
+ PHYS_SDRAM_3,
+#endif
+#ifdef PHYS_SDRAM_4
+ PHYS_SDRAM_4
+#endif
+};
+
+int board_init(void)
+{
+ struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+ icache_enable();
+
+#ifdef USE_920T_MMU
+ dcache_enable();
+#endif
+
+ /*
+ * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
+ * 14.7456/2 MHz
+ */
+ uint32_t value = readl(&syscon->pwrcnt);
+ value |= SYSCON_PWRCNT_UART_BAUD;
+ writel(value, &syscon->pwrcnt);
+
+ /* Machine number, as defined in linux/arch/arm/tools/mach-types */
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* We have a console */
+ gd->have_console = 1;
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+ return ep93xx_eth_initialize(0, MAC_BASE);
+}
+
+int dram_init(void)
+{
+ unsigned int *src, *dst;
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ const ulong bank_size = get_ram_size((long *)bank_addr[i],
+ MAX_BANK_SIZE);
+ if (bank_size) {
+ gd->bd->bi_dram[i].start = bank_addr[i];
+ gd->bd->bi_dram[i].size = bank_size;
+ }
+ }
+
+ /* copy exception vectors */
+ src = (unsigned int *)_armboot_start;
+ dst = (unsigned int *)PHYS_SDRAM_1;
+ memcpy(dst, src, 16 * sizeof(unsigned int));
+
+ return 0;
+}
--- /dev/null
+/*
+ * Flash setup for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+
+#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \
+ SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \
+ 1 << SMC_BCR_MW_SHIFT)
+
+void flash_cfg(void)
+{
+ struct smc_regs *smc = (struct smc_regs *)SMC_BASE;
+
+ writel(SMC_BCR6_VALUE, &smc->bcr6);
+}
--- /dev/null
+/*
+ * PLL setup for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include "pll_cfg.h"
+#include "early_udelay.h"
+
+void pll_cfg(void)
+{
+ struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+ /* setup PLL1 */
+ writel(CLKSET1_VAL, &syscon->clkset1);
+
+ /*
+ * flush the pipeline
+ * writing to CLKSET1 causes the EP93xx to enter standby for between
+ * 8 ms to 16 ms, until PLL1 stabilizes
+ */
+ asm("nop");
+ asm("nop");
+ asm("nop");
+ asm("nop");
+ asm("nop");
+
+ /* setup PLL2 */
+ writel(CLKSET2_VAL, &syscon->clkset2);
+
+ /*
+ * the user's guide recommends to wait at least 1 ms for PLL2 to
+ * stabilize
+ */
+ early_udelay(1000);
+}
--- /dev/null
+/*
+ * PLL register values for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/ep93xx.h>
+
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
+ defined(CONFIG_EDB9302A)
+/*
+ * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2
+ * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000,
+ * pll1_x2: 331776000.000000, pll1_out: 331776000.000000
+ */
+#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
+ 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
+ 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
+ 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
+ 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
+ SYSCON_CLKSET1_NBYP1 | \
+ 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
+#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
+ defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
+ defined(CONFIG_EDB9315A)
+/*
+ * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2
+ * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000,
+ * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000
+ */
+#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
+ 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
+ 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
+ 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
+ 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
+ SYSCON_CLKSET1_NBYP1 | \
+ 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
+#else
+#error "Undefined board"
+#endif
+
+/*
+ * usb_div: 4, nbyp2: 1, pll2_en: 1
+ * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000,
+ * pll2_x2: 384000000.000000, pll2_out: 192000000.000000
+ */
+#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
+ 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
+ 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
+ 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \
+ SYSCON_CLKSET2_PLL2_EN | \
+ SYSCON_CLKSET2_NBYP2 | \
+ 3 << SYSCON_CLKSET2_USB_DIV_SHIFT)
--- /dev/null
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/io.h>
+#include "sdram_cfg.h"
+#include "early_udelay.h"
+
+#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \
+ (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
+
+#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
+ (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank))
+
+static void force_precharge(void);
+static void setup_refresh_timer(void);
+static void program_mode_registers(void);
+
+void sdram_cfg(void)
+{
+ struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
+
+ writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
+
+ /* Issue continous NOP commands */
+ writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
+
+ early_udelay(200);
+
+ force_precharge();
+
+ setup_refresh_timer();
+
+ program_mode_registers();
+
+ /* Select normal operation mode */
+ writel(GLCONFIG_CKE, &sdram->glconfig);
+}
+
+static void force_precharge(void)
+{
+ /*
+ * Errata most EP93xx revisions say that PRECHARGE ALL isn't always
+ * issued.
+ *
+ * Do a read from each bank to make sure they're precharged
+ */
+
+ PRECHARGE_BANK(0);
+ PRECHARGE_BANK(1);
+ PRECHARGE_BANK(2);
+ PRECHARGE_BANK(3);
+}
+
+static void setup_refresh_timer(void)
+{
+ struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
+
+ /* Load refresh timer with 10 to issue refresh every 10 cycles */
+ writel(0x0a, &sdram->refrshtimr);
+
+ /*
+ * Wait at least 80 clock cycles to provide 8 refresh cycles
+ * to all SDRAMs
+ */
+ early_udelay(1);
+
+ /*
+ * Program refresh timer with normal value
+ * We need 8192 refresh cycles every 64ms
+ * at 15ns (HCLK >= 66MHz) per cycle:
+ * 64ms / 8192 = 7.8125us
+ * 7.8125us / 15ns = 520 (0x208)
+ */
+ /*
+ * TODO: redboot uses 0x1e0 for the slowest possible device
+ * but i don't understand how this value is calculated
+ */
+ writel(0x208, &sdram->refrshtimr);
+}
+
+static void program_mode_registers(void)
+{
+ /*
+ * The mode registers are programmed by performing a read from each
+ * SDRAM bank. The value of the address that is read defines the value
+ * that is written into the mode register
+ */
+
+ PROGRAM_MODE_REG(0);
+
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+ PROGRAM_MODE_REG(1);
+#endif
+
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+ PROGRAM_MODE_REG(2);
+#endif
+
+#if (CONFIG_NR_DRAM_BANKS == 4)
+ PROGRAM_MODE_REG(3);
+#endif
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/ep93xx.h>
+
+#define SDRAM_BASE_ADDR PHYS_SDRAM_1
+
+#ifdef CONFIG_EDB93XX_SDCS0
+#define SDRAM_DEVCFG_REG devcfg0
+#elif defined(CONFIG_EDB93XX_SDCS3)
+#define SDRAM_DEVCFG_REG devcfg3
+#else
+#error "SDRAM bank configuration"
+#endif
+
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
+ defined(CONFIG_EDB9302A)
+/*
+ * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
+ *
+ * CLK cycle time min:
+ * @ CAS latency = 3: 7.5ns
+ * @ CAS latency = 2: 10ns
+ * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
+ * so it's safe to use CAS latency = 2
+ *
+ * RAS-to-CAS delay min:
+ * 20ns
+ * At 15ns cycle time, we use RAS-to-CAS delay = 2
+ *
+ * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
+ * as four blocks of 8MB size, instead of eight blocks of 4MB size:
+ *
+ * EDB9301/EDB9302:
+ *
+ * 0x00000000 - 0x007fffff
+ * 0x01000000 - 0x017fffff
+ * 0x04000000 - 0x047fffff
+ * 0x05000000 - 0x057fffff
+ *
+ *
+ * EDB9302a:
+ *
+ * 0xc0000000 - 0xc07fffff
+ * 0xc1000000 - 0xc17fffff
+ * 0xc4000000 - 0xc47fffff
+ * 0xc5000000 - 0xc57fffff
+ *
+ * BANKCOUNT = 1: This is a device with four banks
+ */
+
+#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
+ SDRAM_DEVCFG_SROMLL | \
+ SDRAM_DEVCFG_CASLAT_2 | \
+ SDRAM_DEVCFG_RASTOCAS_2 | \
+ SDRAM_DEVCFG_EXTBUSWIDTH)
+
+/*
+ * 16 bit ext. bus
+ *
+ * A[22:09] is output as SYA[13:0]
+ * CAS latency: 2
+ * Burst type: sequential
+ * Burst length: 8 (required for 16 bit ext. bus)
+ * SYA[13:0] = 0x0023
+ */
+#define SDRAM_MODE_REG_VAL 0x4600
+
+#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */
+#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */
+#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */
+#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */
+
+#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
+ defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
+ defined(CONFIG_EDB9315A)
+/*
+ * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
+ *
+ * CLK cycle time min:
+ * @ CAS latency = 3: 7.5ns
+ * @ CAS latency = 2: 10ns
+ * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
+ * so it's safe to use CAS latency = 2
+ *
+ * RAS-to-CAS delay min:
+ * 20ns
+ * At 10ns cycle time, we use RAS-to-CAS delay = 2
+ *
+ * EDB9307, EDB9312, EDB9315:
+ *
+ * 0x00000000 - 0x01ffffff
+ * 0x04000000 - 0x05ffffff
+ *
+ *
+ * EDB9307a, EDB9315a:
+ *
+ * 0xc0000000 - 0xc1ffffff
+ * 0xc4000000 - 0xc5ffffff
+ */
+
+#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
+ SDRAM_DEVCFG_SROMLL | \
+ SDRAM_DEVCFG_CASLAT_2 | \
+ SDRAM_DEVCFG_RASTOCAS_2)
+
+/*
+ * 32 bit ext. bus
+ *
+ * A[23:10] is output as SYA[13:0]
+ * CAS latency: 2
+ * Burst type: sequential
+ * Burst length: 4
+ * SYA[13:0] = 0x0022
+ */
+#define SDRAM_MODE_REG_VAL 0x8800
+
+#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */
+#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */
+#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */
+#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */
+#endif
--- /dev/null
+/*
+ * U-boot - Configuration file for Cirrus Logic EDB93xx boards
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_MK_edb9301
+#define CONFIG_EDB9301
+#elif defined(CONFIG_MK_edb9302)
+#define CONFIG_EDB9302
+#elif defined(CONFIG_MK_edb9302a)
+#define CONFIG_EDB9302A
+#elif defined(CONFIG_MK_edb9307)
+#define CONFIG_EDB9307
+#elif defined(CONFIG_MK_edb9307a)
+#define CONFIG_EDB9307A
+#elif defined(CONFIG_MK_edb9312)
+#define CONFIG_EDB9312
+#elif defined(CONFIG_MK_edb9315)
+#define CONFIG_EDB9315
+#elif defined(CONFIG_MK_edb9315a)
+#define CONFIG_EDB9315A
+#else
+#error "no board defined"
+#endif
+
+/* Initial environment and monitor configuration options. */
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
+#define CONFIG_BOOTFILE "edb93xx.img"
+
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#ifdef CONFIG_EDB9301
+#define CONFIG_EP9301
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
+#define CONFIG_SYS_PROMPT "EDB9301> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9302)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
+#define CONFIG_SYS_PROMPT "EDB9302> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9302A)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
+#define CONFIG_SYS_PROMPT "EDB9302A> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9307)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
+#define CONFIG_SYS_PROMPT "EDB9307> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9307A)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
+#define CONFIG_SYS_PROMPT "EDB9307A> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9312)
+#define CONFIG_EP9312
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
+#define CONFIG_SYS_PROMPT "EDB9312> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9315)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
+#define CONFIG_SYS_PROMPT "EDB9315> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9315A)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
+#define CONFIG_SYS_PROMPT "EDB9315A> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#else
+#error "no board defined"
+#endif
+
+/* High-level configuration options */
+#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
+#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
+
+#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
+#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */
+#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
+
+/* Monitor configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+/* Print buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* Boot argument buffer size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
+
+/* Serial port hardware configuration */
+#define CONFIG_PL010_SERIAL
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_SERIAL0 0x808C0000
+#define CONFIG_SYS_SERIAL1 0x808D0000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+
+/* Status LED */
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED 1
+#define STATUS_LED_GREEN 0
+#define STATUS_LED_RED 1
+/* Green */
+#define STATUS_LED_BIT STATUS_LED_GREEN
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+/* Red */
+#define STATUS_LED_BIT1 STATUS_LED_RED
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* Optional value */
+#define STATUS_LED_BOOT STATUS_LED_BIT
+
+/* Network hardware configuration */
+#define CONFIG_DRIVER_EP93XX_MAC
+#define CONFIG_MII_SUPPRESS_PREAMBLE
+#define CONFIG_MII
+#define CONFIG_PHY_ADDR 1
+#define CONFIG_NET_MULTI
+#undef CONFIG_NETCONSOLE
+
+/* SDRAM configuration */
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
+/*
+ * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ */
+#define CONFIG_NR_DRAM_BANKS 4
+#define PHYS_SDRAM_1 0x00000000
+#define PHYS_SDRAM_SIZE_1 0x00800000
+#define PHYS_SDRAM_2 0x01000000
+#define PHYS_SDRAM_SIZE_2 0x00800000
+#define PHYS_SDRAM_3 0x04000000
+#define PHYS_SDRAM_SIZE_3 0x00800000
+#define PHYS_SDRAM_4 0x05000000
+#define PHYS_SDRAM_SIZE_4 0x00800000
+#define CONFIG_EDB93XX_SDCS3
+#define CONFIG_SYS_MEMTEST_START 0x00100000
+#define CONFIG_SYS_MEMTEST_END 0x007fffff
+
+#elif defined(CONFIG_EDB9302A)
+/*
+ * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ */
+#define CONFIG_NR_DRAM_BANKS 4
+#define PHYS_SDRAM_1 0xc0000000
+#define PHYS_SDRAM_SIZE_1 0x00800000
+#define PHYS_SDRAM_2 0xc1000000
+#define PHYS_SDRAM_SIZE_2 0x00800000
+#define PHYS_SDRAM_3 0xc4000000
+#define PHYS_SDRAM_SIZE_3 0x00800000
+#define PHYS_SDRAM_4 0xc5000000
+#define PHYS_SDRAM_SIZE_4 0x00800000
+#define CONFIG_EDB93XX_SDCS0
+#define CONFIG_SYS_MEMTEST_START 0xc0100000
+#define CONFIG_SYS_MEMTEST_END 0xc07fffff
+
+#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
+ defined(CONFIG_EDB9315)
+/*
+ * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
+ * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
+ * 64 MB of SDRAM.
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 0x00000000
+#define PHYS_SDRAM_SIZE_1 0x02000000
+#define PHYS_SDRAM_2 0x04000000
+#define PHYS_SDRAM_SIZE_2 0x02000000
+#define CONFIG_EDB93XX_SDCS3
+#define CONFIG_SYS_MEMTEST_START 0x00100000
+#define CONFIG_SYS_MEMTEST_END 0x01e00000
+
+#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
+/*
+ * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
+ * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 0xc0000000
+#define PHYS_SDRAM_SIZE_1 0x02000000
+#define PHYS_SDRAM_2 0xc4000000
+#define PHYS_SDRAM_SIZE_2 0x02000000
+#define CONFIG_EDB93XX_SDCS0
+#define CONFIG_SYS_MEMTEST_START 0xc0100000
+#define CONFIG_SYS_MEMTEST_END 0xc1e00000
+#endif
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000)
+
+/* Must match kernel config */
+#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
+
+/* Run-time memory allocatons */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_STACKSIZE (128 * 1024)
+
+#if defined(CONFIG_USE_IRQ)
+#define CONFIG_STACKSIZE_IRQ (4 * 1024)
+#define CONFIG_STACKSIZE_FIQ (4 * 1024)
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
+
+/* -----------------------------------------------------------------------------
+ * FLASH and environment organization
+ *
+ * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
+ * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
+ * for a total of 16 MB of CFI-compatible flash.
+ *
+ * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
+ * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
+ * data bus, for a total of 32 MB of CFI-compatible flash.
+ *
+ * EDB9301/02(a) EDB9307(a)/12/15(a)
+ * 0x60000000 - 0x0003FFFF u-boot u-boot
+ * 0x60040000 - 0x0005FFFF environment #1 environment #1
+ * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
+ * 0x60080000 - 0x0009FFFF unused environment #2
+ * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
+ * 0x600C0000 - 0x00FFFFFF unused unused
+ * 0x61000000 - 0x01FFFFFF not present unused
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+
+#define PHYS_FLASH_1 0x60000000
+#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+
+#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR 0x60040000
+
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+#endif /* !defined (__CONFIG_H) */
projects / karo-tx-uboot.git / commitdiff