#define _TEGRA_BOARD_H_
/* Set up pinmux to make UART usable */
-void gpio_config_uart(void); /* CONFIG_SPI_UART_SWITCH */
-void gpio_early_init_uart(void); /*!CONFIG_SPI_UART_SWITCH */
+void gpio_early_init_uart(void);
/* Set up early UART output */
void board_init_uart_f(void);
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _UART_SPI_SWITCH_H
-#define _UART_SPI_SWITCH_H
-
-#if defined(CONFIG_SPI_UART_SWITCH)
-/*
- * Signal that we are about to use the UART. This unfortunate hack is
- * required by Seaboard, which cannot use its console and SPI at the same
- * time! If the board file provides this, the board config will declare it.
- * Let this be a lesson for others.
- */
-void pinmux_select_uart(void);
-
-/*
- * Signal that we are about the use the SPI bus.
- */
-void pinmux_select_spi(void);
-
-#else /* not CONFIG_SPI_UART_SWITCH */
-
-static inline void pinmux_select_uart(void) {}
-static inline void pinmux_select_spi(void) {}
-
-#endif
-
-#endif
clock_init();
clock_verify();
-#ifdef CONFIG_SPI_UART_SWITCH
- gpio_config_uart();
-#endif
#if defined(CONFIG_TEGRA_SPI) || defined(CONFIG_TEGRA_SLINK)
pin_mux_spi();
spi_init();
# common options for all tegra boards
COBJS-y += ../../nvidia/common/board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/uart-spi-switch.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/tegra_spi.h>
-#include <asm/arch-tegra/board.h>
-
-/* position of the UART/SPI select switch */
-enum spi_uart_switch {
- SWITCH_UNKNOWN,
- SWITCH_SPI,
- SWITCH_UART,
- SWITCH_BOTH
-};
-
-/* Information about the spi/uart switch */
-struct spi_uart {
- int gpio; /* GPIO to control switch */
- u32 port; /* Port number of UART affected */
-};
-
-static struct spi_uart local;
-static enum spi_uart_switch switch_pos; /* Current switch position */
-
-
-static void get_config(struct spi_uart *config)
-{
-#if defined CONFIG_SPI_CORRUPTS_UART
- config->gpio = CONFIG_UART_DISABLE_GPIO;
- config->port = CONFIG_SPI_CORRUPTS_UART_NR;
-#else
- config->gpio = -1;
-#endif
-}
-
-/*
- * Init the UART / SPI switch. This can be called before relocation so we must
- * not access BSS.
- */
-void gpio_early_init_uart(void)
-{
- struct spi_uart config;
-
- get_config(&config);
- if (config.gpio != -1) {
- /* Cannot provide a label prior to relocation */
- gpio_request(config.gpio, NULL);
- gpio_direction_output(config.gpio, 0);
- }
-}
-
-/*
- * Configure the UART / SPI switch.
- */
-void gpio_config_uart(void)
-{
- get_config(&local);
- if (local.gpio != -1) {
- gpio_direction_output(local.gpio, 0);
- switch_pos = SWITCH_UART;
- } else {
- /*
- * If we're here we don't have a SPI switch; go ahead and
- * enable the SPI now. We didn't in spi_init() so we wouldn't
- * kill the UART.
- */
- pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
- switch_pos = SWITCH_BOTH;
- }
-}
-
-static void spi_uart_switch(struct spi_uart *config,
- enum spi_uart_switch new_pos)
-{
- if (switch_pos == SWITCH_BOTH || new_pos == switch_pos)
- return;
-
- /* pre-delay, allow SPI/UART to settle, FIFO to empty, etc. */
- udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
-
- /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */
- pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ?
- PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD);
-
- /*
- * On Seaboard, MOSI/MISO are shared w/UART.
- * Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity.
- * Enable UART later (cs_deactivate) so we can use it for U-Boot comms.
- */
- gpio_direction_output(config->gpio, new_pos == SWITCH_SPI);
- switch_pos = new_pos;
-}
-
-void pinmux_select_uart(void)
-{
- spi_uart_switch(&local, SWITCH_UART);
-}
-
-void pinmux_select_spi(void)
-{
- spi_uart_switch(&local, SWITCH_SPI);
-}
#include <asm/gpio.h>
/* TODO: Remove this code when the SPI switch is working */
-#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
#include <asm/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch/uart-spi-switch.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/tegra_spi.h>
#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPI_CORRUPTS_UART)
- #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
-#else
- #define corrupt_delay()
-#endif
-
struct tegra_spi_slave {
struct spi_slave slave;
struct spi_tegra *regs;
*/
pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
pinmux_tristate_disable(PINGRP_LSPI);
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
-#ifndef CONFIG_SPI_UART_SWITCH
- /*
- * NOTE:
- * Only set PinMux bits 3:2 to SPI here on boards that don't have the
- * SPI UART switch or subsequent UART data won't go out! See
- * spi_uart_switch().
- */
- /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
-#endif
return 0;
}
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- pinmux_select_spi();
-
/* CS is negated on Tegra, so drive a 1 to get a 0 */
setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
- corrupt_delay(); /* Let UART settle */
}
void spi_cs_deactivate(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- pinmux_select_uart();
-
/* CS is negated on Tegra, so drive a 0 to get a 1 */
clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
- corrupt_delay(); /* Let SPI settle */
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
projects / karo-tx-uboot.git / commitdiff