i2c_set_bus_num(0);
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
-
+#ifdef CONFIG_MACH_TYPE
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_FACTORYSET
}
#ifndef CONFIG_SPL_BUILD
+
+#define MAX_NR_LEDS 10
+#define MAX_PIN_NUMBER 128
+#define STARTUP 0
+
#if defined(BOARD_DFU_BUTTON_GPIO)
-/*
- * This command returns the status of the user button on
- * Input - none
- * Returns - 1 if button is held down
- * 0 if button is not held down
- */
-static int
-do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+unsigned char get_button_state(char * const envname, unsigned char def)
{
int button = 0;
int gpio;
+ char *ptr_env;
- gpio = BOARD_DFU_BUTTON_GPIO;
- gpio_request(gpio, "DFU");
+ /* If button is not found we take default */
+ ptr_env = getenv(envname);
+ if (NULL == ptr_env) {
+ gpio = def;
+ } else {
+ gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0);
+ if (gpio > MAX_PIN_NUMBER)
+ gpio = def;
+ }
+
+ gpio_request(gpio, "");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
button = 1;
return button;
}
-
-U_BOOT_CMD(
- dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
- "Return the status of the DFU button",
- ""
-);
-#endif
-/*
- * This command sets led
- * Input - name of led
- * value of led
- * Returns - 1 if input does not match
- * 0 if led was set
+/**
+ * This command returns the status of the user button on
+ * Input - none
+ * Returns - 1 if button is held down
+ * 0 if button is not held down
*/
static int
-do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int gpio = 0;
- if (argc != 3)
- goto exit;
-#if defined(BOARD_STATUS_LED)
- if (!strcmp(argv[1], "stat"))
- gpio = BOARD_STATUS_LED;
-#endif
-#if defined(BOARD_DFU_BUTTON_LED)
- if (!strcmp(argv[1], "dfu"))
- gpio = BOARD_DFU_BUTTON_LED;
-#endif
- /* If argument does not mach exit */
- if (gpio == 0)
- goto exit;
- gpio_request(gpio, "");
- gpio_direction_output(gpio, 1);
- if (!strcmp(argv[2], "1"))
- gpio_set_value(gpio, 1);
- else
- gpio_set_value(gpio, 0);
- return 0;
-exit:
- return 1;
+ int button = 0;
+ button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO);
+ button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO);
+ return button;
}
U_BOOT_CMD(
- led, CONFIG_SYS_MAXARGS, 2, do_setled,
- "Set led on or off",
- "dfu val - set dfu led\nled stat val - set status led"
+ dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
+ "Return the status of the DFU button",
+ ""
);
+#endif
static int
do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
"Sends U-Boot into infinite loop",
""
);
+
+/**
+ * Get led gpios from env and set them.
+ * The led define in environment need to need to be of the form ledN=NN,S0,S1
+ * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0
+ * defines the startup state of the led, S1 the special state of the led when
+ * it enters e.g. dfu mode.
+ */
+void set_env_gpios(unsigned char state)
+{
+ char *ptr_env;
+ char str_tmp[5]; /* must contain "ledX"*/
+ char num[1];
+ unsigned char i, idx, pos1, pos2, ccount;
+ unsigned char gpio_n, gpio_s0, gpio_s1;
+
+ for (i = 0; i < MAX_NR_LEDS; i++) {
+ strcpy(str_tmp, "led");
+ sprintf(num, "%d", i);
+ strcat(str_tmp, num);
+
+ /* If env var is not found we stop */
+ ptr_env = getenv(str_tmp);
+ if (NULL == ptr_env)
+ break;
+
+ /* Find sperators position */
+ pos1 = 0;
+ pos2 = 0;
+ ccount = 0;
+ for (idx = 0; ptr_env[idx] != '\0'; idx++) {
+ if (ptr_env[idx] == ',') {
+ if (ccount++ < 1)
+ pos1 = idx;
+ else
+ pos2 = idx;
+ }
+ }
+ /* Bad led description skip this definition */
+ if (pos2 <= pos1 || ccount > 2)
+ continue;
+
+ /* Get pin number and request gpio */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env, pos1*sizeof(char));
+ gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0);
+
+ /* Invalid gpio number skip definition */
+ if (gpio_n > MAX_PIN_NUMBER)
+ continue;
+
+ gpio_request(gpio_n, "");
+
+ if (state == STARTUP) {
+ /* get pin state 0 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env+pos1+1,
+ (pos2-pos1-1)*sizeof(char));
+ gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+
+ gpio_direction_output(gpio_n, gpio_s0);
+
+ } else {
+ /* get pin state 1 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strcpy(str_tmp, ptr_env+pos2+1);
+ gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+ gpio_direction_output(gpio_n, gpio_s1);
+ }
+ } /* loop through defined led in environment */
+}
+
+static int do_board_led(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+ if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP)
+ set_env_gpios(0);
+ else
+ set_env_gpios(1);
+ return 0;
+};
+
+U_BOOT_CMD(
+ draco_led, CONFIG_SYS_MAXARGS, 2, do_board_led,
+ "Set LEDs defined in environment",
+ "<0|1>"
+);
#endif /* !CONFIG_SPL_BUILD */
/* Default@303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
- 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32,
0x0000093B, 0x0000014A,
"default name @303MHz \0",
"default marking \0",
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
printf("device:\t\t%s\n", settings.ddr3.manu_name);
printf("marking:\t%s\n", settings.ddr3.manu_marking);
- printf("timing parameters\n");
- printf("diff\teeprom\tdefault\n");
+ printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom",
+ "default", "diff");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
static void print_chip_data(void)
{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
printf("\nCPU BOARD\n");
printf("device: \t'%s'\n", settings.chip.sdevname);
printf("hw version: \t'%s'\n", settings.chip.shwver);
+ printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m);
}
#endif /* CONFIG_SPL_BUILD */
config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
+
+ /* For Samsung 2Gbit RAM we need this delay otherwise config fails after
+ * soft reset.
+ */
+ udelay(2000);
}
static void spl_siemens_board_init(void)
}
#endif /* if def CONFIG_SPL_BUILD */
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ omap_nand_switch_ecc(1, 8);
+#ifdef CONFIG_FACTORYSET
+ /* Set ASN in environment*/
+ if (factory_dat.asn[0] != 0) {
+ setenv("dtb_name", (char *)factory_dat.asn);
+ } else {
+ /* dtb suffix gets added in load script */
+ setenv("dtb_name", "am335x-draco");
+ }
+#else
+ setenv("dtb_name", "am335x-draco");
+#endif
+
+ return 0;
+}
+#endif
+
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- omap_nand_switch_ecc(1, 8);
-
- return 0;
-}
-#endif
-
#include "../common/board.c"
#ifndef _BOARD_H_
#define _BOARD_H_
-#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \
- settings.ddr3.x, ddr3_default.x
-#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
+#define PARGS(x) #x , /* Parameter Name */ \
+ settings.ddr3.x, /* EEPROM Value */ \
+ ddr3_default.x, /* Default Value */ \
+ settings.ddr3.x-ddr3_default.x /* Difference */
+
+#define PRINTARGS(y) printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
+
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
void enable_uart5_pin_mux(void);
void enable_i2c0_pin_mux(void);
void enable_board_pin_mux(void);
+
+/* Forwared declaration, defined in common board.c */
+void set_env_gpios(unsigned char state);
#endif
static struct module_pin_mux gpios_pin_mux[] = {
/* DFU button GPIO0_27*/
- {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
+ {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
{OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */
{OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */
/* Triacs in HW Rev 2 */
{OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
{OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
/* nRST for SMSC LAN9303 switch - GPIO2_24 */
- {OFFSET(lcd_pclk), MODE(7) }, /* LAN9303 nRST */
+ {OFFSET(lcd_pclk), MODE(7) | PULLUDEN | PULLUP_EN }, /* LAN9303 nRST */
{-1},
};
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 275
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-#define BOARD_DFU_BUTTON_GPIO 27
-#define BOARD_DFU_BUTTON_LED 64 /* red LED */
-#define BOARD_STATUS_LED 103 /* green LED */
+#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
+#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ "button_dfu0=27\0" \
+ "led0=103,1,0\0" \
+ "led1=64,0,1\0"
+
#undef CONFIG_DOS_PARTITION
#undef CONFIG_CMD_FAT
+#define CONFIG_BOARD_LATE_INIT
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
/* Watchdog */
#define CONFIG_OMAP_WATCHDOG
+/* Define own nand partitions */
+#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
+#define CONFIG_ENV_SIZE_REDUND 0x2000
+#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
+
+
+#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
+
#ifndef CONFIG_SPL_BUILD
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hostname=draco\0" \
"nand_img_size=0x400000\0" \
"optargs=\0" \
- CONFIG_COMMON_ENV_SETTINGS
+ "preboot=draco_led 0\0" \
+ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ CONFIG_ENV_SETTINGS_V2 \
+ CONFIG_ENV_SETTINGS_NAND_V2
#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */
"reset; " \
"fi;" \
"run nand_boot;" \
+"run nand_boot_backup;" \
"reset;"
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 275
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define BOARD_STATUS_LED 103 /* green LED */
#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
+#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ "button_dfu0=27\0" \
+ "led0=103,1,0\0" \
+ "led1=64,0,1\0"
+
#undef CONFIG_DOS_PARTITION
#undef CONFIG_CMD_FAT
+#define CONFIG_BOARD_LATE_INIT
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
/* Watchdog */
#define CONFIG_OMAP_WATCHDOG
+/* Define own nand partitions */
+#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
+#define CONFIG_ENV_SIZE_REDUND 0x2000
+#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
+
+
+#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
+
#ifndef CONFIG_SPL_BUILD
/* Default env settings */
"hostname=dxr2\0" \
"nand_img_size=0x400000\0" \
"optargs=\0" \
- CONFIG_COMMON_ENV_SETTINGS
+ "preboot=draco_led 0\0" \
+ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ CONFIG_ENV_SETTINGS_V2 \
+ CONFIG_ENV_SETTINGS_NAND_V2
#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */
"reset; " \
"fi;" \
"run nand_boot;" \
+"run nand_boot_backup;" \
"reset;"
#define DDR_PLL_FREQ 266
#define BOARD_DFU_BUTTON_GPIO 59
-#define BOARD_DFU_BUTTON_LED 117
#define BOARD_LCD_POWER 111
#define BOARD_BACK_LIGHT 112
#define BOARD_TOUCH_POWER 57
+#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ "button_dfu0=59\0" \
+ "led0=117,0,1\0" \
+
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
#define CONFIG_FACTORYSET
-/* UBI Support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
/* Watchdog */
#define CONFIG_OMAP_WATCHDOG
#ifndef CONFIG_SPL_BUILD
+/* Use common default */
+#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1
+
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=pxm2\0" \
"nand_img_size=0x500000\0" \
"optargs=\0" \
+ "preboot=draco_led 0\0" \
+ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
"splashpos=m,m\0" \
- CONFIG_COMMON_ENV_SETTINGS \
+ CONFIG_ENV_SETTINGS_V1 \
+ CONFIG_ENV_SETTINGS_NAND_V1 \
"mmc_dev=0\0" \
"mmc_root=/dev/mmcblk0p2 rw\0" \
"mmc_root_fs_type=ext4 rootwait\0" \
#define CONFIG_FACTORYSET
-/* UBI Support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
/* Watchdog */
#define WATCHDOG_TRIGGER_GPIO 14
#ifndef CONFIG_SPL_BUILD
+/* Use common default */
+#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1
+
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=rut\0" \
"nand_img_size=0x500000\0" \
"splashpos=m,m\0" \
"optargs=fixrtc --no-log consoleblank=0 \0" \
- CONFIG_COMMON_ENV_SETTINGS \
+ CONFIG_ENV_SETTINGS_V1 \
+ CONFIG_ENV_SETTINGS_NAND_V1 \
"mmc_dev=0\0" \
"mmc_root=/dev/mmcblk0p2 rw\0" \
"mmc_root_fs_type=ext4 rootwait\0" \
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_TIME
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_MAXARGS 32
/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_CBSIZE 1024
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND
+
+/* UBI Support */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Commen environment */
+#define CONFIG_PREBOOT
+#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
+ "setenv bootargs ${bootargs};" \
+ "mtdparts default;" \
+ "draco_led 1;" \
+ "dfu 0 nand 0;" \
+ "draco_led 0;\0" \
+
+#define COMMON_ENV_NAND_BOOT \
+ "nand_boot=echo Booting from nand; " \
+ "if test ${upgrade_available} -eq 1; then " \
+ "if test ${bootcount} -gt ${bootlimit}; " \
+ "then " \
+ "setenv upgrade_available 0;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv partitionset_active B; " \
+ "env delete A; " \
+ "fi;" \
+ "if test -n ${B}; then " \
+ "setenv partitionset_active A; " \
+ "env delete B; " \
+ "fi;" \
+ "saveenv; " \
+ "fi;" \
+ "fi;" \
+ "echo set ${partitionset_active}...;" \
+ "run nand_args; "
+
+#define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \
+ "flash_self_test=setenv testargs test; " \
+ "run nand_boot\0" \
+ "dfu_start=echo Preparing for dfu mode ...; " \
+ "run dfu_args; \0"
+
+#define COMMON_ENV_SETTINGS \
+ "verify=no \0" \
+ "project_dir=targetdir\0" \
+ "upgrade_available=0\0" \
+ "altbootcmd=run bootcmd\0" \
+ "bootlimit=3\0" \
+ "partitionset_active=A\0" \
+ "loadaddr=0x82000000\0" \
+ "kloadaddr=0x81000000\0" \
+ "script_addr=0x81900000\0" \
+ "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
+ "nfsopts=nolock rw\0" \
+ "ip_method=none\0" \
+ "bootenv=uEnv.txt\0" \
+ "bootargs_defaults=setenv bootargs " \
+ "console=${console} " \
+ "${testargs} " \
+ "${optargs}\0" \
+ "siemens_help=echo; "\
+ "echo Type 'run flash_self' to use kernel and root " \
+ "filesystem on memory; echo Type 'run flash_self_test' to " \
+ "use kernel and root filesystem on memory, boot in test " \
+ "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
+ "from memory and root filesystem over NFS; echo Type " \
+ "'run net_nfs' to get Kernel over TFTP and mount root " \
+ "filesystem over NFS; " \
+ "echo Set partitionset_active variable to 'A' " \
+ "or 'B' to select kernel and rootfs partition; " \
+ "echo" \
+ "\0"
-#define MTDIDS_NAME_STR "omap2-nand.0"
-#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
-#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \
- "128k(spl)," \
- "128k(spl.backup1)," \
- "128k(spl.backup2)," \
- "128k(spl.backup3)," \
- "1920k(u-boot)," \
- "128k(uboot.env)," \
- "5120k(kernel_a)," \
- "5120k(kernel_b)," \
- "8192k(mtdoops)," \
- "-(rootfs)"
/*
+ * Variant 1 partition layout
* chip-size = 256MiB
*| name | size | address area |
*-------------------------------------------------------
*| rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
*-------------------------------------------------------
*/
+#define MTDIDS_NAME_STR "omap2-nand.0"
+#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
+#define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "128k(uboot.env)," \
+ "5120k(kernel_a)," \
+ "5120k(kernel_b)," \
+ "8192k(mtdoops)," \
+ "-(rootfs)"
-#define DFU_ALT_INFO_NAND \
+#define DFU_ALT_INFO_NAND_V1 \
"spl part 0 1;" \
"spl.backup1 part 0 2;" \
"spl.backup2 part 0 3;" \
"kernel_b part 0 8;" \
"rootfs partubi 0 10"
-#define CONFIG_COMMON_ENV_SETTINGS \
- "verify=no \0" \
- "project_dir=targetdir\0" \
- "upgrade_available=0\0" \
- "altbootcmd=run bootcmd\0" \
- "bootlimit=3\0" \
- "partitionset_active=A\0" \
- "loadaddr=0x82000000\0" \
- "kloadaddr=0x81000000\0" \
- "script_addr=0x81900000\0" \
- "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
+#define CONFIG_ENV_SETTINGS_NAND_V1 \
"nand_active_ubi_vol=rootfs_a\0" \
"nand_active_ubi_vol_A=rootfs_a\0" \
"nand_active_ubi_vol_B=rootfs_b\0" \
"nand_src_addr=0x280000\0" \
"nand_src_addr_A=0x280000\0" \
"nand_src_addr_B=0x780000\0" \
- "nfsopts=nolock rw mem=128M\0" \
- "ip_method=none\0" \
- "bootenv=uEnv.txt\0" \
- "bootargs_defaults=setenv bootargs " \
- "console=${console} " \
- "${testargs} " \
- "${optargs}\0" \
"nand_args=run bootargs_defaults;" \
"mtdparts default;" \
"setenv ${partitionset_active} true;" \
"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
"=mtdoops\0" \
- "dfu_args=run bootargs_defaults;" \
- "setenv bootargs ${bootargs} ;" \
- "mtdparts default; " \
- "led dfu 1;" \
- "led stat 0;" \
- "dfu 0 nand 0;" \
- "led dfu 0;" \
- "led stat 1;\0" \
- "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \
+ COMMON_ENV_DFU_ARGS \
+ "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
+ COMMON_ENV_NAND_BOOT \
+ "nand read.i ${kloadaddr} ${nand_src_addr} " \
+ "${nand_img_size}; bootm ${kloadaddr}\0" \
+ COMMON_ENV_NAND_CMDS
+
+#define CONFIG_ENV_SETTINGS_V1 \
+ COMMON_ENV_SETTINGS \
"net_args=run bootargs_defaults;" \
"mtdparts default;" \
"setenv bootfile ${project_dir}/kernel/uImage;" \
"nfsroot=${serverip}:${rootpath},${nfsopts} " \
"ip=${ipaddr}:${serverip}:" \
"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
- "nand_boot=echo Booting from nand; " \
- "if test ${upgrade_available} -eq 1; then " \
- "if test ${bootcount} -gt ${bootlimit}; " \
- "then " \
- "setenv upgrade_available 0;" \
- "setenv ${partitionset_active} true;" \
- "if test -n ${A}; then " \
- "setenv partitionset_active B; " \
- "env delete A; " \
- "fi;" \
- "if test -n ${B}; then " \
- "setenv partitionset_active A; " \
- "env delete B; " \
- "fi;" \
- "saveenv; " \
- "fi;" \
+ "net_nfs=echo Booting from network ...; " \
+ "run net_args; " \
+ "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
+ "bootm ${kloadaddr}\0"
+
+/*
+ * Variant 2 partition layout
+ * chip-size = 256MiB
+ *| name | size | address area |
+ *-------------------------------------------------------
+ *| spl | 128.000 KiB | 0x 0..0x 1ffff |
+ *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
+ *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
+ *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
+ *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
+ *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
+ *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
+ *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff |
+ *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
+ *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *-------------------------------------------------------
+ */
+
+#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "512k(u-boot.env0)," \
+ "512k(u-boot.env1)," \
+ "148m(rootfs)," \
+ "512k(mtdoops)," \
+ "-(configuration)"
+
+#define DFU_ALT_INFO_NAND_V2 \
+ "spl part 0 1;" \
+ "spl.backup1 part 0 2;" \
+ "spl.backup2 part 0 3;" \
+ "spl.backup3 part 0 4;" \
+ "u-boot part 0 5;" \
+ "u-boot.env0 part 0 6;" \
+ "u-boot.env1 part 0 7;" \
+ "rootfs partubi 0 8;" \
+ "configuration partubi 0 10"
+
+#define CONFIG_ENV_SETTINGS_NAND_V2 \
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "rootfs_name=rootfs\0" \
+ "kernel_name=uImage\0"\
+ "nand_root_fs_type=ubifs rootwait=1\0" \
+ "nand_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
"fi;" \
- "echo set ${partitionset_active}...;" \
- "run nand_args; " \
- "nand read.i ${kloadaddr} ${nand_src_addr} " \
- "${nand_img_size}; bootm ${kloadaddr}\0" \
+ "if test -n ${B}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
+ "fi;" \
+ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
+ "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+ "setenv bootargs ${bootargs} " \
+ "root=${nand_root} noinitrd ${mtdparts} " \
+ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
+ "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
+ "=mtdoops\0" \
+ COMMON_ENV_DFU_ARGS \
+ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
+ COMMON_ENV_NAND_BOOT \
+ "ubi part rootfs 2048;" \
+ "ubifsmount ubi0:${nand_active_ubi_vol};" \
+ "ubifsload ${kloadaddr} boot/${kernel_name};" \
+ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ COMMON_ENV_NAND_CMDS
+
+#define CONFIG_ENV_SETTINGS_V2 \
+ COMMON_ENV_SETTINGS \
+ "net_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv bootfile ${project_dir}/kernel/uImage;" \
+ "setenv bootdtb ${project_dir}/kernel/dtb;" \
+ "setenv rootpath /home/projects/${project_dir}/rootfs;" \
+ "setenv bootargs ${bootargs} " \
+ "root=/dev/nfs ${mtdparts} " \
+ "nfsroot=${serverip}:${rootpath},${nfsopts} " \
+ "ip=${ipaddr}:${serverip}:" \
+ "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
"net_nfs=echo Booting from network ...; " \
"run net_args; " \
"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
- "bootm ${kloadaddr}\0" \
- "flash_self=run nand_boot\0" \
- "flash_self_test=setenv testargs test; " \
- "run nand_boot\0" \
- "dfu_start=echo Preparing for dfu mode ...; " \
- "run dfu_args; \0" \
- "preboot=echo; "\
- "echo Type 'run flash_self' to use kernel and root " \
- "filesystem on memory; echo Type 'run flash_self_test' to " \
- "use kernel and root filesystem on memory, boot in test " \
- "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
- "from memory and root filesystem over NFS; echo Type " \
- "'run net_nfs' to get Kernel over TFTP and mount root " \
- "filesystem over NFS; " \
- "echo Set partitionset_active variable to 'A' " \
- "or 'B' to select kernel and rootfs partition; " \
- "echo" \
- "\0"
+ "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
+ "bootm ${kloadaddr} - ${loadaddr}\0"
+
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_OMAP_GPIO
+/* Gpio cmd support */
+#define CONFIG_CMD_GPIO
+
/* Watchdog */
#define CONFIG_HW_WATCHDOG
projects / karo-tx-uboot.git / commitdiff