* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
- * (C) Copyright 2002
+ * (C) Copyright 2002, 2010
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* See file CREDITS for list of people who contributed to this
#include <common.h>
#include <netdev.h>
+#include <asm/io.h>
#include <asm/arch/s3c24x0_cpu.h>
DECLARE_GLOBAL_DATA_PTR;
#define U_M_SDIV 0x2
#endif
-static inline void delay (unsigned long loops)
+static inline void pll_delay(unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
* Miscellaneous platform dependent initialisations
*/
-int board_init (void)
+int board_early_init_f(void)
{
struct s3c24x0_clock_power * const clk_power =
s3c24x0_get_base_clock_power();
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->locktime = 0xFFFFFF;
+ writel(0xFFFFFF, &clk_power->locktime);
/* configure MPLL */
- clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
+ &clk_power->mpllcon);
/* some delay between MPLL and UPLL */
- delay (4000);
+ pll_delay(4000);
/* configure UPLL */
- clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
+ &clk_power->upllcon);
/* some delay between MPLL and UPLL */
- delay (8000);
+ pll_delay(8000);
/* set up the I/O ports */
- gpio->gpacon = 0x007FFFFF;
- gpio->gpbcon = 0x00044555;
- gpio->gpbup = 0x000007FF;
- gpio->gpccon = 0xAAAAAAAA;
- gpio->gpcup = 0x0000FFFF;
- gpio->gpdcon = 0xAAAAAAAA;
- gpio->gpdup = 0x0000FFFF;
- gpio->gpecon = 0xAAAAAAAA;
- gpio->gpeup = 0x0000FFFF;
- gpio->gpfcon = 0x000055AA;
- gpio->gpfup = 0x000000FF;
- gpio->gpgcon = 0xFF95FFBA;
- gpio->gpgup = 0x0000FFFF;
- gpio->gphcon = 0x002AFAAA;
- gpio->gphup = 0x000007FF;
+ writel(0x007FFFFF, &gpio->gpacon);
+ writel(0x00044555, &gpio->gpbcon);
+ writel(0x000007FF, &gpio->gpbup);
+ writel(0xAAAAAAAA, &gpio->gpccon);
+ writel(0x0000FFFF, &gpio->gpcup);
+ writel(0xAAAAAAAA, &gpio->gpdcon);
+ writel(0x0000FFFF, &gpio->gpdup);
+ writel(0xAAAAAAAA, &gpio->gpecon);
+ writel(0x0000FFFF, &gpio->gpeup);
+ writel(0x000055AA, &gpio->gpfcon);
+ writel(0x000000FF, &gpio->gpfup);
+ writel(0xFF95FFBA, &gpio->gpgcon);
+ writel(0x0000FFFF, &gpio->gpgup);
+ writel(0x002AFAAA, &gpio->gphcon);
+ writel(0x000007FF, &gpio->gphup);
+
+ return 0;
+}
+int board_init(void)
+{
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
return 0;
}
-int dram_init (void)
+int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
+#define CONFIG_ARM920T /* This is an ARM920T Core */
+#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
+#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */
#define CONFIG_SYS_TEXT_BASE 0x0
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
+#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
+/* input clock of PLL (the SMDK2410 has 12MHz input clock) */
+#define CONFIG_SYS_CLK_FREQ 12000000
-#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
/*
* Hardware drivers
* select serial console configuration
*/
#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
+
+/************************************************************
+ * USB support (currently only works with D-cache off)
+ ************************************************************/
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
/************************************************************
* RTC
************************************************************/
-#define CONFIG_RTC_S3C24X0 1
+#define CONFIG_RTC_S3C24X0
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_BSP
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
-
-
-#define CONFIG_BOOTDELAY 3
-/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
-/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
-#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+
+/* autoboot */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.0.110
#define CONFIG_SERVERIP 10.0.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMDK2410 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "SMDK2410 # "
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* may be activated as soon as s3c24x0 has print_cpuinfo support */
+/*#define CONFIG_DISPLAY_CPUINFO*/ /* Display cpu info */
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x30800000
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/* support additional compression methods */
+#define CONFIG_BZIP2
+#define CONFIG_LZO
+#define CONFIG_LZMA
+
/*-----------------------------------------------------------------------
* Stack sizes
*
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #0 */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_SECT (19)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE 0x10000
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Size of malloc() pool
+ * BZIP2 / LZO / LZMA need a lot of RAM
+ */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_LEN (448 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_S3C2410
+#define CONFIG_SYS_S3C2410_NAND_HWECC
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_BASE 0x4E000000
+#endif
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_YAFFS2
+#define CONFIG_RBTREE
+
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
GENERATED_GBL_DATA_SIZE)
+#define CONFIG_BOARD_EARLY_INIT_F
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff