$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
- $(OBJCOPY) -O srec $< $@
+ $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
as a convenience, when switching between booting from
RAM and NFS.
+- Bootcount:
+ CONFIG_BOOTCOUNT_LIMIT
+ Implements a mechanism for detecting a repeating reboot
+ cycle, see:
+ http://www.denx.de/wiki/view/DULG/UBootBootCountLimit
+
+ CONFIG_BOOTCOUNT_ENV
+ If no softreset save registers are found on the hardware
+ "bootcount" is stored in the environment. To prevent a
+ saveenv on all reboots, the environment variable
+ "upgrade_available" is used. If "upgrade_available" is
+ 0, "bootcount" is always 0, if "upgrade_available" is
+ 1 "bootcount" is incremented in the environment.
+ So the Userspace Applikation must set the "upgrade_available"
+ and "bootcount" variable to 0, if a boot was successfully.
+
- Pre-Boot Commands:
CONFIG_PREBOOT
NOTE : currently only supported on AM335x platforms.
+- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
+ Enables the RTC32K OSC on AM33xx based plattforms
+
Freescale QE/FMAN Firmware Support:
-----------------------------------
# such usage by requiring word relocations.
PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations)
endif
+
+# limit ourselves to the sections we want in the .bin.
+OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rel.dyn
+obj-$(CONFIG_AT91FAMILY) += at91-common/
obj-$(CONFIG_TEGRA) += $(SOC)-common/
obj-$(CONFIG_TEGRA) += tegra-common/
*/
#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#ifdef CONFIG_RED_LED
void red_led_on(void)
{
- at91_set_gpio_value(CONFIG_RED_LED, 1);
+ gpio_set_value(CONFIG_RED_LED, 1);
}
void red_led_off(void)
{
- at91_set_gpio_value(CONFIG_RED_LED, 0);
+ gpio_set_value(CONFIG_RED_LED, 0);
}
#endif
#ifdef CONFIG_GREEN_LED
void green_led_on(void)
{
- at91_set_gpio_value(CONFIG_GREEN_LED, 0);
+ gpio_set_value(CONFIG_GREEN_LED, 0);
}
void green_led_off(void)
{
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ gpio_set_value(CONFIG_GREEN_LED, 1);
}
#endif
#ifdef CONFIG_YELLOW_LED
void yellow_led_on(void)
{
- at91_set_gpio_value(CONFIG_YELLOW_LED, 0);
+ gpio_set_value(CONFIG_YELLOW_LED, 0);
}
void yellow_led_off(void)
{
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+ gpio_set_value(CONFIG_YELLOW_LED, 1);
}
#endif
_end = .;
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
_end = .;
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
obj-y += cpu.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
}
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
static void rtc32k_enable(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
+#endif
static void uart_soft_reset(void)
{
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
prcm_init();
set_mux_conf_regs();
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
rtc32k_enable();
+#endif
sdram_init();
#endif
}
void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
{
writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
- writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff);
writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
- writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff);
writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
- writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff);
writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
}
&(ddr_data_reg[nr]+i)->dt0fwsratio0);
writel(data->datawrsratio0,
&(ddr_data_reg[nr]+i)->dt0wrsratio0);
- writel(data->datauserank0delay,
- &(ddr_data_reg[nr]+i)->dt0rdelays0);
- writel(data->datadldiff0,
- &(ddr_data_reg[nr]+i)->dt0dldiff0);
}
}
unsigned int has_emac()
{
- return cpu_is_sama5d31() || cpu_is_sama5d35();
+ return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36();
}
unsigned int has_gmac()
return "SAMA5D34";
case ARCH_EXID_SAMA5D35:
return "SAMA5D35";
+ case ARCH_EXID_SAMA5D36:
+ return "SAMA5D36";
default:
return "Unknown CPU type";
}
at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */
/* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SYS);
+ at91_periph_clk_enable(ATMEL_ID_DBGU);
}
#if defined(CONFIG_ATMEL_SPI)
at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
/* Enable PITC Clock */
- at91_periph_clk_enable(ATMEL_ID_SYS);
+ at91_periph_clk_enable(ATMEL_ID_PIT);
/* Enable PITC */
writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
else {
if (proid_is_exynos4412())
exynos4x12_set_mmc_clk(dev_index, div);
- exynos4_set_mmc_clk(dev_index, div);
+ else
+ exynos4_set_mmc_clk(dev_index, div);
}
}
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC3:
case PERIPH_ID_SDMMC4:
- printf("SDMMC device %d not implemented\n", peripheral);
+ debug("SDMMC device %d not implemented\n", peripheral);
return -1;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
#include <asm/arch/dmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/spl.h>
+#include <asm/arch/spi.h>
#include "common_setup.h"
#include "clock_init.h"
}
#endif
+#ifdef CONFIG_SPI_BOOTING
+static void spi_rx_tx(struct exynos_spi *regs, int todo,
+ void *dinp, void const *doutp, int i)
+{
+ uint *rxp = (uint *)(dinp + (i * (32 * 1024)));
+ int rx_lvl, tx_lvl;
+ uint out_bytes, in_bytes;
+
+ out_bytes = todo;
+ in_bytes = todo;
+ setbits_le32(®s->ch_cfg, SPI_CH_RST);
+ clrbits_le32(®s->ch_cfg, SPI_CH_RST);
+ writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, ®s->pkt_cnt);
+
+ while (in_bytes) {
+ uint32_t spi_sts;
+ int temp;
+
+ spi_sts = readl(®s->spi_sts);
+ rx_lvl = ((spi_sts >> 15) & 0x7f);
+ tx_lvl = ((spi_sts >> 6) & 0x7f);
+ while (tx_lvl < 32 && out_bytes) {
+ temp = 0xffffffff;
+ writel(temp, ®s->tx_data);
+ out_bytes -= 4;
+ tx_lvl += 4;
+ }
+ while (rx_lvl >= 4 && in_bytes) {
+ temp = readl(®s->rx_data);
+ if (rxp)
+ *rxp++ = temp;
+ in_bytes -= 4;
+ rx_lvl -= 4;
+ }
+ }
+}
+
+/*
+ * Copy uboot from spi flash to RAM
+ *
+ * @parma uboot_size size of u-boot to copy
+ * @param uboot_addr address in u-boot to copy
+ */
+static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)
+{
+ int upto, todo;
+ int i, timeout = 100;
+ struct exynos_spi *regs = (struct exynos_spi *)CONFIG_ENV_SPI_BASE;
+
+ set_spi_clk(PERIPH_ID_SPI1, 50000000); /* set spi clock to 50Mhz */
+ /* set the spi1 GPIO */
+ exynos_pinmux_config(PERIPH_ID_SPI1, PINMUX_FLAG_NONE);
+
+ /* set pktcnt and enable it */
+ writel(4 | SPI_PACKET_CNT_EN, ®s->pkt_cnt);
+ /* set FB_CLK_SEL */
+ writel(SPI_FB_DELAY_180, ®s->fb_clk);
+ /* set CH_WIDTH and BUS_WIDTH as word */
+ setbits_le32(®s->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+ SPI_MODE_BUS_WIDTH_WORD);
+ clrbits_le32(®s->ch_cfg, SPI_CH_CPOL_L); /* CPOL: active high */
+
+ /* clear rx and tx channel if set priveously */
+ clrbits_le32(®s->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+
+ setbits_le32(®s->swap_cfg, SPI_RX_SWAP_EN |
+ SPI_RX_BYTE_SWAP |
+ SPI_RX_HWORD_SWAP);
+
+ /* do a soft reset */
+ setbits_le32(®s->ch_cfg, SPI_CH_RST);
+ clrbits_le32(®s->ch_cfg, SPI_CH_RST);
+
+ /* now set rx and tx channel ON */
+ setbits_le32(®s->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON | SPI_CH_HS_EN);
+ clrbits_le32(®s->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
+
+ /* Send read instruction (0x3h) followed by a 24 bit addr */
+ writel((SF_READ_DATA_CMD << 24) | SPI_FLASH_UBOOT_POS, ®s->tx_data);
+
+ /* waiting for TX done */
+ while (!(readl(®s->spi_sts) & SPI_ST_TX_DONE)) {
+ if (!timeout) {
+ debug("SPI TIMEOUT\n");
+ break;
+ }
+ timeout--;
+ }
+
+ for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
+ todo = min(uboot_size - upto, (1 << 15));
+ spi_rx_tx(regs, todo, (void *)(uboot_addr),
+ (void *)(SPI_FLASH_UBOOT_POS), i);
+ }
+
+ setbits_le32(®s->cs_reg, SPI_SLAVE_SIG_INACT);/* make the CS high */
+
+ /*
+ * Let put controller mode to BYTE as
+ * SPI driver does not support WORD mode yet
+ */
+ clrbits_le32(®s->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+ SPI_MODE_BUS_WIDTH_WORD);
+ writel(0, ®s->swap_cfg);
+
+ /*
+ * Flush spi tx, rx fifos and reset the SPI controller
+ * and clear rx/tx channel
+ */
+ clrsetbits_le32(®s->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
+ clrbits_le32(®s->ch_cfg, SPI_CH_RST);
+ clrbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
+}
+#endif
+
/*
* Copy U-boot from mmc to RAM:
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
u32 offset = 0, size = 0;
+#ifdef CONFIG_SPI_BOOTING
+ struct spl_machine_param *param = spl_get_machine_params();
+#endif
#ifdef CONFIG_SUPPORT_EMMC_BOOT
u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
void (*end_bootop_from_emmc)(void);
switch (bootmode) {
#ifdef CONFIG_SPI_BOOTING
case BOOT_MODE_SERIAL:
- offset = SPI_FLASH_UBOOT_POS;
- size = CONFIG_BL2_SIZE;
- copy_bl2 = get_irom_func(SPI_INDEX);
+ /* Customised function to copy u-boot from SF */
+ exynos_spi_copy(param->uboot_size, CONFIG_SYS_TEXT_BASE);
break;
#endif
case BOOT_MODE_MMC:
.arch_extension sec
.arch_extension virt
+ .align 5
/* the vector table for secure state and HYP mode */
_monitor_vectors:
.word 0 /* reset */
* to non-secure state.
* We use only r0 and r1 here, due to constraints in the caller.
*/
- .align 5
_secure_monitor:
mrc p15, 0, r1, c1, c1, 0 @ read SCR
bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits
obj-y += abb.o
endif
+ifneq ($(CONFIG_OMAP54XX),)
+obj-y += pipe3-phy.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
+endif
+
ifeq ($(CONFIG_OMAP34XX),)
obj-y += boot-common.o
obj-y += lowlevel_init.o
}
}
-static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
/*
* Set invert_clkout (if activated)--DDR_PHYCTRL_1
- * Invert clock adds an additional half cycle delay on the command
- * interface. The additional half cycle, is usually meant to enable
- * leveling in the situation that DQS is later than CK on the board.It
- * also helps provide some additional margin for leveling.
+ * Invert clock adds an additional half cycle delay on the
+ * command interface. The additional half cycle, is usually
+ * meant to enable leveling in the situation that DQS is later
+ * than CK on the board.It also helps provide some additional
+ * margin for leveling.
*/
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif->emif_ddr_phy_ctrl_1);
+
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif->emif_ddr_phy_ctrl_1_shdw);
__udelay(130);
writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)
- & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+ & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
/* Launch Full leveling */
writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
/* Wait till full leveling is complete */
readl(&emif->emif_rd_wr_lvl_ctl);
- __udelay(130);
+ __udelay(130);
/* Read data eye leveling no of samples */
config_data_eye_leveling_samples(base);
- /* Launch 8 incremental WR_LVL- to compensate for PHY limitation */
- writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl);
+ /*
+ * Launch 8 incremental WR_LVL- to compensate for
+ * PHY limitation.
+ */
+ writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT,
+ &emif->emif_rd_wr_lvl_ctl);
+
__udelay(130);
/* Launch Incremental leveling */
writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl);
- __udelay(130);
+ __udelay(130);
}
-static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ u32 fifo_reg;
+
+ fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_1);
+ writel(fifo_reg | 0x00000100,
+ &emif->emif_ddr_fifo_misaligned_clear_1);
+
+ fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_2);
+ writel(fifo_reg | 0x00000100,
+ &emif->emif_ddr_fifo_misaligned_clear_2);
+
+ /* Launch Full leveling */
+ writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+ /* Wait till full leveling is complete */
+ readl(&emif->emif_rd_wr_lvl_ctl);
+ __udelay(130);
+
+ /* Read data eye leveling no of samples */
config_data_eye_leveling_samples(base);
- writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
- writel(regs->sdram_config, &emif->emif_sdram_config);
+ /*
+ * Disable leveling. This is because if leveling is kept
+ * enabled, then PHY triggers a false leveling during
+ * EMIF-idle scenario which results in wrong delay
+ * values getting updated. After this the EMIF becomes
+ * unaccessible. So disable it after the first time
+ */
+ writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl);
+}
+
+static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+ if (is_omap54xx())
+ omap5_ddr3_leveling(base, regs);
+ else
+ dra7_ddr3_leveling(base, regs);
}
static void ddr3_init(u32 base, const struct emif_regs *regs)
* defined, contents of mode Registers must be fully initialized.
* H/W takes care of this initialization
*/
- writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
- writel(regs->sdram_config_init, &emif->emif_sdram_config);
-
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
/* Update timing registers */
writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
- do_ext_phy_settings(base, regs);
+ /*
+ * The same sequence should work on OMAP5432 as well. But strange that
+ * it is not working
+ */
+ if (omap_revision() == DRA752_ES1_0) {
+ do_ext_phy_settings(base, regs);
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ } else {
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ do_ext_phy_settings(base, regs);
+ }
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
- if (omap_revision() == DRA752_ES1_0)
- ddr3_sw_leveling(base, regs);
- else
- ddr3_leveling(base, regs);
+ ddr3_leveling(base, regs);
}
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
set_lpmode_selfrefresh(base);
emif_reset_phy(base);
- if (omap_revision() == DRA752_ES1_0)
- ddr3_sw_leveling(base, regs);
- else
- ddr3_leveling(base, regs);
+ ddr3_leveling(base, regs);
}
/* Write to the shadow registers */
}
+static void do_bug0039_workaround(u32 base)
+{
+ u32 val, i, clkctrl;
+ struct emif_reg_struct *emif_base = (struct emif_reg_struct *)base;
+ const struct read_write_regs *bug_00339_regs;
+ u32 iterations;
+ u32 *phy_status_base = &emif_base->emif_ddr_phy_status[0];
+ u32 *phy_ctrl_base = &emif_base->emif_ddr_ext_phy_ctrl_1;
+
+ if (is_dra7xx())
+ phy_status_base++;
+
+ bug_00339_regs = get_bug_regs(&iterations);
+
+ /* Put EMIF in to idle */
+ clkctrl = __raw_readl((*prcm)->cm_memif_clkstctrl);
+ __raw_writel(0x0, (*prcm)->cm_memif_clkstctrl);
+
+ /* Copy the phy status registers in to phy ctrl shadow registers */
+ for (i = 0; i < iterations; i++) {
+ val = __raw_readl(phy_status_base +
+ bug_00339_regs[i].read_reg - 1);
+
+ __raw_writel(val, phy_ctrl_base +
+ ((bug_00339_regs[i].write_reg - 1) << 1));
+
+ __raw_writel(val, phy_ctrl_base +
+ (bug_00339_regs[i].write_reg << 1) - 1);
+ }
+
+ /* Disable leveling */
+ writel(0x0, &emif_base->emif_rd_wr_lvl_rmp_ctl);
+
+ __raw_writel(clkctrl, (*prcm)->cm_memif_clkstctrl);
+}
+
/*
* SDRAM initialization:
* SDRAM initialization has two parts:
debug("get_ram_size() successful");
}
+ if (sdram_type == EMIF_SDRAM_TYPE_DDR3 &&
+ (!in_sdram && !warm_reset())) {
+ do_bug0039_workaround(EMIF1_BASE);
+ do_bug0039_workaround(EMIF2_BASE);
+ }
+
debug("<<sdram_init()\n");
}
--- /dev/null
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <sata.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "pipe3-phy.h"
+
+/* PLLCTRL Registers */
+#define PLL_STATUS 0x00000004
+#define PLL_GO 0x00000008
+#define PLL_CONFIGURATION1 0x0000000C
+#define PLL_CONFIGURATION2 0x00000010
+#define PLL_CONFIGURATION3 0x00000014
+#define PLL_CONFIGURATION4 0x00000020
+
+#define PLL_REGM_MASK 0x001FFE00
+#define PLL_REGM_SHIFT 9
+#define PLL_REGM_F_MASK 0x0003FFFF
+#define PLL_REGM_F_SHIFT 0
+#define PLL_REGN_MASK 0x000001FE
+#define PLL_REGN_SHIFT 1
+#define PLL_SELFREQDCO_MASK 0x0000000E
+#define PLL_SELFREQDCO_SHIFT 1
+#define PLL_SD_MASK 0x0003FC00
+#define PLL_SD_SHIFT 10
+#define SET_PLL_GO 0x1
+#define PLL_TICOPWDN BIT(16)
+#define PLL_LDOPWDN BIT(15)
+#define PLL_LOCK 0x2
+#define PLL_IDLE 0x1
+
+/* PHY POWER CONTROL Register */
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
+
+
+#define PLL_IDLE_TIME 100 /* in milliseconds */
+#define PLL_LOCK_TIME 100 /* in milliseconds */
+
+static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
+ *pipe3)
+{
+ u32 rate;
+ struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
+
+ rate = get_sys_clk_freq();
+
+ for (; dpll_map->rate; dpll_map++) {
+ if (rate == dpll_map->rate)
+ return &dpll_map->params;
+ }
+
+ printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
+ __func__, rate);
+ return NULL;
+}
+
+
+static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_LOCK_TIME;
+
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (val & PLL_LOCK)
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_LOCK)) {
+ printf("%s: DPLL failed to lock\n", __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_dpll_params *dpll_params;
+
+ dpll_params = omap_pipe3_get_dpll_params(phy);
+ if (!dpll_params) {
+ printf("%s: Invalid DPLL parameters\n", __func__);
+ return -EINVAL;
+ }
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGN_MASK;
+ val |= dpll_params->n << PLL_REGN_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val &= ~PLL_SELFREQDCO_MASK;
+ val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGM_MASK;
+ val |= dpll_params->m << PLL_REGM_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+ val &= ~PLL_REGM_F_MASK;
+ val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+ val &= ~PLL_SD_MASK;
+ val |= dpll_params->sd << PLL_SD_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+ return omap_pipe3_wait_lock(phy);
+}
+
+static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
+{
+ u32 val, rate;
+
+ val = readl(phy->power_reg);
+
+ rate = get_sys_clk_freq();
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ }
+
+ writel(val, phy->power_reg);
+}
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy)
+{
+ int ret;
+ u32 val;
+
+ /* Program the DPLL only if not locked */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (!(val & PLL_LOCK)) {
+ ret = omap_pipe3_dpll_program(phy);
+ if (ret)
+ return ret;
+ } else {
+ /* else just bring it out of IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ if (val & PLL_IDLE) {
+ val &= ~PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base,
+ PLL_CONFIGURATION2, val);
+ ret = omap_pipe3_wait_lock(phy);
+ if (ret)
+ return ret;
+ }
+ }
+
+ /* Power up the PHY */
+ omap_control_phy_power(phy, 1);
+
+ return 0;
+}
+
+int phy_pipe3_power_off(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_IDLE_TIME;
+
+ /* Power down the PHY */
+ omap_control_phy_power(phy, 0);
+
+ /* Put DPLL in IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ /* wait for LDO and Oscillator to power down */
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+ __func__, val);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
--- /dev/null
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __OMAP_PIPE3_PHY_H
+#define __OMAP_PIPE3_PHY_H
+
+struct pipe3_dpll_params {
+ u16 m;
+ u8 n;
+ u8 freq:3;
+ u8 sd;
+ u32 mf;
+};
+
+struct pipe3_dpll_map {
+ unsigned long rate;
+ struct pipe3_dpll_params params;
+};
+
+struct omap_pipe3 {
+ void __iomem *pll_ctrl_base;
+ void __iomem *power_reg;
+ struct pipe3_dpll_map *dpll_map;
+};
+
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy);
+int phy_pipe3_power_off(struct omap_pipe3 *pipe3);
+
+#endif /* __OMAP_PIPE3_PHY_H */
--- /dev/null
+/*
+ * TI SATA platform driver
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sata.h>
+#include <asm/io.h>
+#include "pipe3-phy.h"
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+ {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
+ {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
+ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
+ {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
+ {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
+ {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
+ { }, /* Terminator */
+};
+
+struct omap_pipe3 sata_phy = {
+ .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
+ /* .power_reg is updated at runtime */
+ .dpll_map = dpll_map_sata,
+};
+
+int omap_sata_init(void)
+{
+ int ret;
+ u32 val;
+
+ u32 const clk_domains_sata[] = {
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_sata[] = {
+ (*prcm)->cm_l3init_ocp2scp3_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_sata[] = {
+ (*prcm)->cm_l3init_sata_clkctrl,
+ 0
+ };
+
+ do_enable_clocks(clk_domains_sata,
+ clk_modules_hw_auto_sata,
+ clk_modules_explicit_en_sata,
+ 0);
+
+ /* Enable optional functional clock for SATA */
+ setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+ SATA_CLKCTRL_OPTFCLKEN_MASK);
+
+ sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+ /* Power up the PHY */
+ phy_pipe3_power_on(&sata_phy);
+
+ /* Enable SATA module, No Idle, No Standby */
+ val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+ writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
+
+ ret = ahci_init(DWC_AHSATA_BASE);
+ scsi_scan(1);
+
+ return ret;
+}
sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
}
- sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
- sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
sdelay(1000);
}
.mm.pmic = &twl6030,
};
+/*
+ * Take closest integer part of the mV value corresponding to a TWL6032 SMPS
+ * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7.
+ */
struct vcores_data omap4470_volts = {
- .mpu.value = 1200,
+ .mpu.value = 1202,
.mpu.addr = SMPS_REG_ADDR_SMPS1,
.mpu.pmic = &twl6030,
.core.value = 1126,
- .core.addr = SMPS_REG_ADDR_SMPS1,
+ .core.addr = SMPS_REG_ADDR_SMPS2,
.core.pmic = &twl6030,
- .mm.value = 1137,
- .mm.addr = SMPS_REG_ADDR_SMPS1,
+ .mm.value = 1139,
+ .mm.addr = SMPS_REG_ADDR_SMPS5,
.mm.pmic = &twl6030,
};
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
.sdram_config_init = 0x80000eb9,
.sdram_config = 0x80001ab9,
.ref_ctrl = 0x0000030c,
.emif_ddr_phy_ctlr_1 = 0x049ff808
};
-static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
.sdram_config_init = 0x80000eb1,
.sdram_config = 0x80001ab1,
.ref_ctrl = 0x000005cd,
{
*regs = &mr_regs;
}
+
+__weak const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+ return 0;
+}
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
};
const struct ctrl_ioregs ioregs_omap5432_es2 = {
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
};
const struct ctrl_ioregs ioregs_dra7xx_es1 = {
.ctrl_ddrch = 0x40404040,
.ctrl_lpddr2ch = 0x40404040,
.ctrl_ddr3ch = 0x80808080,
- .ctrl_ddrio_0 = 0xbae8c631,
- .ctrl_ddrio_1 = 0xb46318d8,
+ .ctrl_ddrio_0 = 0xA2084210,
+ .ctrl_ddrio_1 = 0x84210840,
.ctrl_ddrio_2 = 0x84210000,
- .ctrl_emif_sdram_config_ext = 0xb2c00000,
+ .ctrl_emif_sdram_config_ext = 0x0001C1A7,
+ .ctrl_emif_sdram_config_ext_final = 0x000101A7,
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
};
io_settings_lpddr2();
else
io_settings_ddr3();
-
- /* Efuse settings */
- writel(EFUSE_1, (*ctrl)->control_efuse_1);
- writel(EFUSE_2, (*ctrl)->control_efuse_2);
- writel(EFUSE_3, (*ctrl)->control_efuse_3);
- writel(EFUSE_4, (*ctrl)->control_efuse_4);
}
static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
void config_data_eye_leveling_samples(u32 emif_base)
{
+ const struct ctrl_ioregs *ioregs;
+
+ get_ioregs(&ioregs);
+
/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
if (emif_base == EMIF1_BASE)
- writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- (*ctrl)->control_emif1_sdram_config_ext);
+ writel(ioregs->ctrl_emif_sdram_config_ext_final,
+ (*ctrl)->control_emif1_sdram_config_ext);
else if (emif_base == EMIF2_BASE)
- writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- (*ctrl)->control_emif2_sdram_config_ext);
+ writel(ioregs->ctrl_emif_sdram_config_ext_final,
+ (*ctrl)->control_emif2_sdram_config_ext);
}
void init_omap_revision(void)
.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
.cm_l3init_p1500_clkctrl = 0x4a009378,
+ .cm_l3init_sata_clkctrl = 0x4a009388,
.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+ .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009400,
.control_status = 0x4A002134,
.control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4,
.control_phy_power_usb = 0x4A002370,
+ .control_phy_power_sata = 0x4A002374,
.control_padconf_core_base = 0x4A002800,
.control_paconf_global = 0x4A002DA0,
.control_paconf_mode = 0x4A002DA4,
struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_status = 0x4A002134,
+ .control_phy_power_sata = 0x4A002374,
.control_core_mac_id_0_lo = 0x4A002514,
.control_core_mac_id_0_hi = 0x4A002518,
.control_core_mac_id_1_lo = 0x4A00251C,
.cm_l3init_hsusbotg_clkctrl = 0x4a009660,
.cm_l3init_hsusbtll_clkctrl = 0x4a009668,
.cm_l3init_p1500_clkctrl = 0x4a009678,
+ .cm_l3init_sata_clkctrl = 0x4a009688,
.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
.cm_l3init_hsusbhost_clkctrl = 0x4a009340,
.cm_l3init_hsusbotg_clkctrl = 0x4a009348,
.cm_l3init_hsusbtll_clkctrl = 0x4a009350,
+ .cm_l3init_sata_clkctrl = 0x4a009388,
.cm_gmac_clkstctrl = 0x4a0093c0,
.cm_gmac_gmac_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+ .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009700,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0E20400A,
- .emif_ddr_phy_ctlr_1 = 0x0E24400A,
- .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_3 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_4 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400A,
+ .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0020400A,
- .emif_ddr_phy_ctlr_1 = 0x0E24400A,
- .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_3 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_4 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_5 = 0x009D009D,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400A,
+ .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ext_phy_ctrl_const_base[] = {
0x01004010,
0x00001004,
0x04010040,
0x0
};
-const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es1[] = {
0x01004010,
0x00001004,
0x04010040,
0x0
};
-const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
0x50D4350D,
0x00000D43,
0x04010040,
};
const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
- 0x009E009E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x0,
- 0x600020,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
+ 0x00B000B0,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00800080,
+ 0x00800080,
0x40010080,
- 0x8102040
+ 0x08102040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
};
const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
- 0x009D009D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
+ 0x00BB00BB,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
0x0,
- 0x600020,
+ 0x00600020,
0x40010080,
- 0x8102040
+ 0x08102040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
};
const struct lpddr2_mr_regs mr_regs = {
.mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+ const u32 **regs,
+ u32 *size)
{
switch (omap_revision()) {
case OMAP5430_ES1_0:
case OMAP5430_ES2_0:
*regs = ext_phy_ctrl_const_base;
+ *size = ARRAY_SIZE(ext_phy_ctrl_const_base);
break;
case OMAP5432_ES1_0:
*regs = ddr3_ext_phy_ctrl_const_base_es1;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es1);
break;
case OMAP5432_ES2_0:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
break;
case DRA752_ES1_0:
- if (emif_nr == 1)
+ if (emif_nr == 1) {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
- else
+ *size =
+ ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif1);
+ } else {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+ *size =
+ ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2);
+ }
break;
default:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
}
}
u32 emif_nr;
const u32 *ext_phy_ctrl_const_regs;
u32 i = 0;
+ u32 size;
emif_nr = (base == EMIF1_BASE) ? 1 : 2;
* external phy 6-24 registers do not change with
* ddr frequency
*/
- emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
- for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
+ emif_get_ext_phy_ctrl_const_regs(emif_nr,
+ &ext_phy_ctrl_const_regs, &size);
+
+ for (i = 0; i < size; i++) {
writel(ext_phy_ctrl_const_regs[i],
emif_ext_phy_ctrl_base++);
/* Update shadow registers */
.min_tck = &min_tck,
};
+/*
+ * List of status registers to be controlled back to control registers
+ * after initial leveling
+ * readreg, writereg
+ */
+const struct read_write_regs omap5_bug_00339_regs[] = {
+ { 8, 5 },
+ { 9, 6 },
+ { 10, 7 },
+ { 14, 8 },
+ { 15, 9 },
+ { 16, 10 },
+ { 11, 2 },
+ { 12, 3 },
+ { 13, 4 },
+ { 17, 11 },
+ { 18, 12 },
+ { 19, 13 },
+};
+
+const struct read_write_regs dra_bug_00339_regs[] = {
+ { 7, 7 },
+ { 8, 8 },
+ { 9, 9 },
+ { 10, 10 },
+ { 11, 11 },
+ { 12, 2 },
+ { 13, 3 },
+ { 14, 4 },
+ { 15, 5 },
+ { 16, 6 },
+ { 17, 12 },
+ { 18, 13 },
+ { 19, 14 },
+ { 20, 15 },
+ { 21, 16 },
+ { 22, 17 },
+ { 23, 18 },
+ { 24, 19 },
+ { 25, 20 },
+ { 26, 21}
+};
+
+const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+ const struct read_write_regs *bug_00339_regs_ptr = NULL;
+
+ switch (omap_revision()) {
+ case OMAP5430_ES1_0:
+ case OMAP5430_ES2_0:
+ case OMAP5432_ES1_0:
+ case OMAP5432_ES2_0:
+ bug_00339_regs_ptr = omap5_bug_00339_regs;
+ *iterations = sizeof(omap5_bug_00339_regs)/
+ sizeof(omap5_bug_00339_regs[0]);
+ break;
+ case DRA752_ES1_0:
+ bug_00339_regs_ptr = dra_bug_00339_regs;
+ *iterations = sizeof(dra_bug_00339_regs)/
+ sizeof(dra_bug_00339_regs[0]);
+ break;
+ default:
+ printf("\n Error: UnKnown SOC");
+ }
+
+ return bug_00339_regs_ptr;
+}
+
void emif_get_device_timings_sdp(u32 emif_nr,
const struct lpddr2_device_timings **cs0_device_timings,
const struct lpddr2_device_timings **cs1_device_timings)
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y = lowlevel_init.o
-obj-y += cpu_info.o
+obj-y = cpu_info.o
obj-y += emac.o
obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
obj-$(CONFIG_GLOBAL_TIMER) += timer.o
-obj-$(CONFIG_R8A7740) += cpu_info-r8a7740.o
-obj-$(CONFIG_R8A7740) += pfc-r8a7740.o
-obj-$(CONFIG_SH73A0) += cpu_info-sh73a0.o
-obj-$(CONFIG_SH73A0) += pfc-sh73a0.o
+obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
+obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o
+obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o
+obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o
+++ /dev/null
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# Make ARMv5 to allow more compilers to work, even though its v7a.
-PLATFORM_CPPFLAGS += -march=armv5
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
+ * This file is r8a7790 processor support.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#define PRR 0xFF000044
+
+u32 rmobile_get_cpu_type(void)
+{
+ return (readl(PRR) & 0x00007F00) >> 8;
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+ return (readl(PRR) & 0x000000F0) >> 4;
+}
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#define PRR 0xFF000044
+
+u32 rmobile_get_cpu_type(void)
+{
+ u32 product;
+
+ product = readl(PRR);
+
+ return (u32)((product & 0x00007F00) >> 8);
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+ u32 product;
+
+ product = readl(PRR);
+
+ return (u32)((product & 0x000000F0) >> 4);
+}
rmobile_get_cpu_rev_fraction());
break;
+ case 0x45:
+ printf("CPU: Renesas Electronics R8A7790 rev %d\n",
+ rmobile_get_cpu_rev_integer());
+ break;
+
+ case 0x47:
+ printf("CPU: Renesas Electronics R8A7791 rev %d\n",
+ rmobile_get_cpu_rev_integer());
+ break;
+
default:
printf("CPU: Renesas Electronics CPU rev %d.%d\n",
rmobile_get_cpu_rev_integer(),
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+ * This file is lager low level initialize.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+ mrc p15, 0, r4, c0, c0, 5 /* mpidr */
+ orr r4, r4, r4, lsr #6
+ and r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */
+
+ b do_lowlevel_init
+
+ .pool
+
+/*
+ * CPU ID #1-#3 come here
+ */
+ .align 4
+do_cpu_waiting:
+ ldr r1, =0xe6180000 /* sysc */
+1: ldr r0, [r1, #0x20] /* sbar */
+ tst r0, r0
+ beq 1b
+ bx r0
+
+/*
+ * Only CPU ID #0 comes here
+ */
+ .align 4
+do_lowlevel_init:
+ /* surpress wfe if ca15 */
+ tst r4, #4
+ mrceq p15, 0, r0, c1, c0, 1 /* actlr */
+ orreq r0, r0, #(1<<7)
+ mcreq p15, 0, r0, c1, c0, 1
+ /* and set l2 latency */
+ mrceq p15, 1, r0, c9, c0, 2 /* l2ctlr */
+ orreq r0, r0, #0x00000800
+ orreq r0, r0, #0x00000003
+ mcreq p15, 1, r0, c9, c0, 2
+
+ ldr r3, =(CONFIG_SYS_INIT_SP_ADDR)
+ sub sp, r3, #4
+ str lr, [sp]
+
+ /* initialize system */
+ bl s_init
+
+ ldr lr, [sp]
+ mov pc, lr
+ nop
+ENDPROC(lowlevel_init)
+ .ltorg
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c
+ * This file is r8a7790 processor support - PFC hardware block.
+ *
+ * Copy from linux-kernel:drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include "pfc-r8a7790.h"
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ GP_ALL(DATA),
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ GP_ALL(IN),
+ PINMUX_INPUT_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ GP_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ GP_ALL(FN),
+
+ /* GPSR0 */
+ FN_IP0_2_0, FN_IP0_5_3, FN_IP0_8_6, FN_IP0_11_9, FN_IP0_15_12,
+ FN_IP0_19_16, FN_IP0_22_20, FN_IP0_26_23, FN_IP0_30_27,
+ FN_IP1_3_0, FN_IP1_7_4, FN_IP1_11_8, FN_IP1_14_12,
+ FN_IP1_17_15, FN_IP1_21_18, FN_IP1_25_22, FN_IP1_27_26,
+ FN_IP1_29_28, FN_IP2_2_0, FN_IP2_5_3, FN_IP2_8_6, FN_IP2_11_9,
+ FN_IP2_14_12, FN_IP2_17_15, FN_IP2_21_18, FN_IP2_25_22,
+ FN_IP2_28_26, FN_IP3_3_0, FN_IP3_7_4, FN_IP3_11_8,
+ FN_IP3_14_12, FN_IP3_17_15,
+
+ /* GPSR1 */
+ FN_IP3_19_18, FN_IP3_22_20, FN_IP3_25_23, FN_IP3_28_26,
+ FN_IP3_31_29, FN_IP4_2_0, FN_IP4_5_3, FN_IP4_8_6, FN_IP4_11_9,
+ FN_IP4_14_12, FN_IP4_17_15, FN_IP4_20_18, FN_IP4_23_21,
+ FN_IP4_26_24, FN_IP4_29_27, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_9_6,
+ FN_IP5_12_10, FN_IP5_14_13, FN_IP5_17_15, FN_IP5_20_18,
+ FN_IP5_23_21, FN_IP5_26_24, FN_IP5_29_27, FN_IP6_2_0,
+ FN_IP6_5_3, FN_IP6_8_6, FN_IP6_10_9, FN_IP6_13_11,
+
+ /* GPSR2 */
+ FN_IP7_28_27, FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4,
+ FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12, FN_IP8_15_14,
+ FN_IP8_17_16, FN_IP8_19_18, FN_IP8_21_20, FN_IP8_23_22,
+ FN_IP8_25_24, FN_IP8_26, FN_IP8_27, FN_VI1_DATA7_VI1_B7,
+ FN_IP6_16_14, FN_IP6_19_17, FN_IP6_22_20, FN_IP6_25_23,
+ FN_IP6_28_26, FN_IP6_31_29, FN_IP7_2_0, FN_IP7_5_3, FN_IP7_7_6,
+ FN_IP7_9_8, FN_IP7_12_10, FN_IP7_15_13,
+
+ /* GPSR3 */
+ FN_IP8_28, FN_IP8_30_29, FN_IP9_1_0, FN_IP9_3_2, FN_IP9_5_4,
+ FN_IP9_7_6, FN_IP9_11_8, FN_IP9_15_12, FN_IP9_17_16, FN_IP9_19_18,
+ FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24, FN_IP9_27_26,
+ FN_IP9_31_28, FN_IP10_3_0, FN_IP10_6_4, FN_IP10_10_7, FN_IP10_14_11,
+ FN_IP10_18_15, FN_IP10_22_19, FN_IP10_25_23, FN_IP10_29_26,
+ FN_IP11_3_0, FN_IP11_4, FN_IP11_6_5, FN_IP11_8_7, FN_IP11_10_9,
+ FN_IP11_12_11, FN_IP11_14_13, FN_IP11_17_15, FN_IP11_21_18,
+
+ /* GPSR4 */
+ FN_IP11_23_22, FN_IP11_26_24, FN_IP11_29_27, FN_IP11_31_30,
+ FN_IP12_1_0, FN_IP12_3_2, FN_IP12_5_4, FN_IP12_7_6, FN_IP12_10_8,
+ FN_IP12_13_11, FN_IP12_16_14, FN_IP12_19_17, FN_IP12_22_20,
+ FN_IP12_24_23, FN_IP12_27_25, FN_IP12_30_28, FN_IP13_2_0,
+ FN_IP13_6_3, FN_IP13_9_7, FN_IP13_12_10, FN_IP13_15_13,
+ FN_IP13_18_16, FN_IP13_22_19, FN_IP13_25_23, FN_IP13_28_26,
+ FN_IP13_30_29, FN_IP14_2_0, FN_IP14_5_3, FN_IP14_8_6, FN_IP14_11_9,
+ FN_IP14_15_12, FN_IP14_18_16,
+
+ /* GPSR5 */
+ FN_IP14_21_19, FN_IP14_24_22, FN_IP14_27_25, FN_IP14_30_28,
+ FN_IP15_2_0, FN_IP15_5_3, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_13_12,
+ FN_IP15_15_14, FN_IP15_17_16, FN_IP15_19_18, FN_IP15_22_20,
+ FN_IP15_25_23, FN_IP15_27_26, FN_IP15_29_28, FN_IP16_2_0,
+ FN_IP16_5_3, FN_USB0_PWEN, FN_USB0_OVC_VBUS, FN_IP16_6, FN_IP16_7,
+ FN_USB2_PWEN, FN_USB2_OVC, FN_AVS1, FN_AVS2, FN_DU_DOTCLKIN0,
+ FN_IP7_26_25, FN_DU_DOTCLKIN2, FN_IP7_18_16, FN_IP7_21_19, FN_IP7_24_22,
+
+ /* IPSR0 - IPSR5 */
+ /* IPSR6 */
+ FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B,
+ FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C,
+ FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B,
+ FN_SSI_SDATA7_C, FN_SSI_SCK78_B, FN_DACK1, FN_IRQ1,
+ FN_INTC_IRQ1_N, FN_SSI_WS6_B, FN_SSI_SDATA8_C,
+ FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B,
+ FN_MSIOF0_TXD_B, FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N,
+ FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B,
+ FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B,
+ FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E,
+ FN_SCL2_CIS_E, FN_ETH_RX_ER, FN_RMII_RX_ER,
+ FN_STP_ISD_0_B, FN_TS_SPSYNC0_D, FN_GLO_Q1_C,
+ FN_SDA2_E, FN_SDA2_CIS_E, FN_ETH_RXD0, FN_RMII_RXD0,
+ FN_STP_ISEN_0_B, FN_TS_SDAT0_D, FN_GLO_I0_C,
+ FN_SCIFB1_SCK_G, FN_SCK1_E, FN_ETH_RXD1,
+ FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B,
+ FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G,
+ FN_RX1_E, FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E,
+ FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E,
+ FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E,
+ FN_STP_IVCXO27_1_B, FN_HRX0_F,
+
+ /* IPSR7 */
+ FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E,
+ FN_SIM0_D_C, FN_HCTS0_N_F, FN_ETH_TXD1,
+ FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F,
+ FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C,
+ FN_HRTS0_N_F, FN_ETH_MAGIC, FN_RMII_MAGIC,
+ FN_SIM0_RST_C, FN_ETH_TXD0, FN_RMII_TXD0,
+ FN_STP_ISCLK_1_B, FN_TS_SDEN1_C, FN_GLO_SCLK_C,
+ FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B,
+ FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, FN_PWM0,
+ FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C,
+ FN_GLO_SS_C, FN_PWM1, FN_SCIFA2_TXD_C,
+ FN_STP_ISSYNC_1_B, FN_TS_SCK1_C, FN_GLO_RFON_C,
+ FN_PCMOE_N, FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C,
+ FN_PCMWE_N, FN_IECLK_C, FN_DU1_DOTCLKIN,
+ FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, FN_VI0_CLK,
+ FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1,
+ FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2,
+ FN_MII_RXD2,
+
+ /* IPSR8 - IPSR16 */
+
+ FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+ FN_SEL_SCIF1_4,
+ FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2,
+ FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2,
+ FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+ FN_SEL_SCIFB1_4,
+ FN_SEL_SCIFB1_5, FN_SEL_SCIFB1_6,
+ FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, FN_SEL_SCIFA1_3,
+ FN_SEL_SCIF0_0, FN_SEL_SCIF0_1,
+ FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+ FN_SEL_SOF1_0, FN_SEL_SOF1_1,
+ FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2,
+ FN_SEL_SSI6_0, FN_SEL_SSI6_1,
+ FN_SEL_SSI5_0, FN_SEL_SSI5_1, FN_SEL_SSI5_2,
+ FN_SEL_VI3_0, FN_SEL_VI3_1,
+ FN_SEL_VI2_0, FN_SEL_VI2_1,
+ FN_SEL_VI1_0, FN_SEL_VI1_1,
+ FN_SEL_VI0_0, FN_SEL_VI0_1,
+ FN_SEL_TSIF1_0, FN_SEL_TSIF1_1, FN_SEL_TSIF1_2,
+ FN_SEL_LBS_0, FN_SEL_LBS_1,
+ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ FN_SEL_SOF3_0, FN_SEL_SOF3_1,
+ FN_SEL_SOF0_0, FN_SEL_SOF0_1,
+
+ FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+ FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1,
+ FN_SEL_SCIFCLK_0, FN_SEL_SCIFCLK_1,
+ FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+ FN_SEL_CANCLK_0, FN_SEL_CANCLK_1,
+ FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA2_2,
+ FN_SEL_CAN1_0, FN_SEL_CAN1_1,
+ FN_SEL_ADI_0, FN_SEL_ADI_1,
+ FN_SEL_SSP_0, FN_SEL_SSP_1,
+ FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3,
+ FN_SEL_FM_4, FN_SEL_FM_5, FN_SEL_FM_6,
+ FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, FN_SEL_HSCIF0_3,
+ FN_SEL_HSCIF0_4, FN_SEL_HSCIF0_5,
+ FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2,
+ FN_SEL_RDS_0, FN_SEL_RDS_1, FN_SEL_RDS_2,
+ FN_SEL_RDS_3, FN_SEL_RDS_4, FN_SEL_RDS_5,
+ FN_SEL_SIM_0, FN_SEL_SIM_1, FN_SEL_SIM_2,
+ FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2,
+
+ FN_SEL_IICDVFS_0, FN_SEL_IICDVFS_1,
+ FN_SEL_IIC0_0, FN_SEL_IIC0_1,
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+ FN_SEL_IIC2_4,
+ FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2,
+ FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3,
+ FN_SEL_I2C2_4,
+ FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2,
+
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ DACK0_MARK, IRQ0_MARK, INTC_IRQ0_N_MARK, SSI_SCK6_B_MARK,
+ VI1_VSYNC_N_MARK, VI1_VSYNC_N_B_MARK, SSI_WS78_C_MARK,
+ DREQ1_N_MARK, VI1_CLKENB_MARK, VI1_CLKENB_B_MARK,
+ SSI_SDATA7_C_MARK, SSI_SCK78_B_MARK, DACK1_MARK, IRQ1_MARK,
+ INTC_IRQ1_N_MARK, SSI_WS6_B_MARK, SSI_SDATA8_C_MARK,
+ DREQ2_N_MARK, HSCK1_B_MARK, HCTS0_N_B_MARK,
+ MSIOF0_TXD_B_MARK, DACK2_MARK, IRQ2_MARK, INTC_IRQ2_N_MARK,
+ SSI_SDATA6_B_MARK, HRTS0_N_B_MARK, MSIOF0_RXD_B_MARK,
+ ETH_CRS_DV_MARK, RMII_CRS_DV_MARK, STP_ISCLK_0_B_MARK,
+ TS_SDEN0_D_MARK, GLO_Q0_C_MARK, SCL2_E_MARK,
+ SCL2_CIS_E_MARK, ETH_RX_ER_MARK, RMII_RX_ER_MARK,
+ STP_ISD_0_B_MARK, TS_SPSYNC0_D_MARK, GLO_Q1_C_MARK,
+ SDA2_E_MARK, SDA2_CIS_E_MARK, ETH_RXD0_MARK, RMII_RXD0_MARK,
+ STP_ISEN_0_B_MARK, TS_SDAT0_D_MARK, GLO_I0_C_MARK,
+ SCIFB1_SCK_G_MARK, SCK1_E_MARK, ETH_RXD1_MARK,
+ RMII_RXD1_MARK, HRX0_E_MARK, STP_ISSYNC_0_B_MARK,
+ TS_SCK0_D_MARK, GLO_I1_C_MARK, SCIFB1_RXD_G_MARK,
+ RX1_E_MARK, ETH_LINK_MARK, RMII_LINK_MARK, HTX0_E_MARK,
+ STP_IVCXO27_0_B_MARK, SCIFB1_TXD_G_MARK, TX1_E_MARK,
+ ETH_REF_CLK_MARK, RMII_REF_CLK_MARK, HCTS0_N_E_MARK,
+ STP_IVCXO27_1_B_MARK, HRX0_F_MARK,
+
+ ETH_MDIO_MARK, RMII_MDIO_MARK, HRTS0_N_E_MARK,
+ SIM0_D_C_MARK, HCTS0_N_F_MARK, ETH_TXD1_MARK,
+ RMII_TXD1_MARK, HTX0_F_MARK, BPFCLK_G_MARK, RDS_CLK_F_MARK,
+ ETH_TX_EN_MARK, RMII_TX_EN_MARK, SIM0_CLK_C_MARK,
+ HRTS0_N_F_MARK, ETH_MAGIC_MARK, RMII_MAGIC_MARK,
+ SIM0_RST_C_MARK, ETH_TXD0_MARK, RMII_TXD0_MARK,
+ STP_ISCLK_1_B_MARK, TS_SDEN1_C_MARK, GLO_SCLK_C_MARK,
+ ETH_MDC_MARK, RMII_MDC_MARK, STP_ISD_1_B_MARK,
+ TS_SPSYNC1_C_MARK, GLO_SDATA_C_MARK, PWM0_MARK,
+ SCIFA2_SCK_C_MARK, STP_ISEN_1_B_MARK, TS_SDAT1_C_MARK,
+ GLO_SS_C_MARK, PWM1_MARK, SCIFA2_TXD_C_MARK,
+ STP_ISSYNC_1_B_MARK, TS_SCK1_C_MARK, GLO_RFON_C_MARK,
+ PCMOE_N_MARK, PWM2_MARK, PWMFSW0_MARK, SCIFA2_RXD_C_MARK,
+ PCMWE_N_MARK, IECLK_C_MARK, DU1_DOTCLKIN_MARK,
+ AUDIO_CLKC_MARK, AUDIO_CLKOUT_C_MARK, VI0_CLK_MARK,
+ ATACS00_N_MARK, AVB_RXD1_MARK, MII_RXD1_MARK,
+ VI0_DATA0_VI0_B0_MARK, ATACS10_N_MARK, AVB_RXD2_MARK,
+ MII_RXD2_MARK,
+
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
+
+ PINMUX_IPSR_DATA(IP6_2_0, DACK0),
+ PINMUX_IPSR_DATA(IP6_2_0, IRQ0),
+ PINMUX_IPSR_DATA(IP6_2_0, INTC_IRQ0_N),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_SCK6_B, SEL_SSI6_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N, SEL_VI1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N_B, SEL_VI1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_WS78_C, SEL_SSI7_2),
+ PINMUX_IPSR_DATA(IP6_5_3, DREQ1_N),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB, SEL_VI1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB_B, SEL_VI1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SDATA7_C, SEL_SSI7_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SCK78_B, SEL_SSI7_1),
+ PINMUX_IPSR_DATA(IP6_8_6, DACK1),
+ PINMUX_IPSR_DATA(IP6_8_6, IRQ1),
+ PINMUX_IPSR_DATA(IP6_8_6, INTC_IRQ1_N),
+ PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_WS6_B, SEL_SSI6_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_SDATA8_C, SEL_SSI8_2),
+ PINMUX_IPSR_DATA(IP6_10_9, DREQ2_N),
+ PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HSCK1_B, SEL_HSCIF1_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HCTS0_N_B, SEL_HSCIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_10_9, MSIOF0_TXD_B, SEL_SOF0_1),
+ PINMUX_IPSR_DATA(IP6_13_11, DACK2),
+ PINMUX_IPSR_DATA(IP6_13_11, IRQ2),
+ PINMUX_IPSR_DATA(IP6_13_11, INTC_IRQ2_N),
+ PINMUX_IPSR_MODSEL_DATA(IP6_13_11, SSI_SDATA6_B, SEL_SSI6_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_13_11, HRTS0_N_B, SEL_HSCIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_13_11, MSIOF0_RXD_B, SEL_SOF0_1),
+ PINMUX_IPSR_DATA(IP6_16_14, ETH_CRS_DV),
+ PINMUX_IPSR_DATA(IP6_16_14, RMII_CRS_DV),
+ PINMUX_IPSR_MODSEL_DATA(IP6_16_14, STP_ISCLK_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_16_14, TS_SDEN0_D, SEL_TSIF0_3),
+ PINMUX_IPSR_MODSEL_DATA(IP6_16_14, GLO_Q0_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_E, SEL_IIC2_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_CIS_E, SEL_I2C2_4),
+ PINMUX_IPSR_DATA(IP6_19_17, ETH_RX_ER),
+ PINMUX_IPSR_DATA(IP6_19_17, RMII_RX_ER),
+ PINMUX_IPSR_MODSEL_DATA(IP6_19_17, STP_ISD_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_19_17, TS_SPSYNC0_D, SEL_TSIF0_3),
+ PINMUX_IPSR_MODSEL_DATA(IP6_19_17, GLO_Q1_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_E, SEL_IIC2_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_CIS_E, SEL_I2C2_4),
+ PINMUX_IPSR_DATA(IP6_22_20, ETH_RXD0),
+ PINMUX_IPSR_DATA(IP6_22_20, RMII_RXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP6_22_20, STP_ISEN_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_22_20, TS_SDAT0_D, SEL_TSIF0_3),
+ PINMUX_IPSR_MODSEL_DATA(IP6_22_20, GLO_I0_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCIFB1_SCK_G, SEL_SCIFB1_6),
+ PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCK1_E, SEL_SCIF1_4),
+ PINMUX_IPSR_DATA(IP6_25_23, ETH_RXD1),
+ PINMUX_IPSR_DATA(IP6_25_23, RMII_RXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, HRX0_E, SEL_HSCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, STP_ISSYNC_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, TS_SCK0_D, SEL_TSIF0_3),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, GLO_I1_C, SEL_GPS_2),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, SCIFB1_RXD_G, SEL_SCIFB1_6),
+ PINMUX_IPSR_MODSEL_DATA(IP6_25_23, RX1_E, SEL_SCIF1_4),
+ PINMUX_IPSR_DATA(IP6_28_26, ETH_LINK),
+ PINMUX_IPSR_DATA(IP6_28_26, RMII_LINK),
+ PINMUX_IPSR_MODSEL_DATA(IP6_28_26, HTX0_E, SEL_HSCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_28_26, STP_IVCXO27_0_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_28_26, SCIFB1_TXD_G, SEL_SCIFB1_6),
+ PINMUX_IPSR_MODSEL_DATA(IP6_28_26, TX1_E, SEL_SCIF1_4),
+ PINMUX_IPSR_DATA(IP6_31_29, ETH_REF_CLK),
+ PINMUX_IPSR_DATA(IP6_31_29, RMII_REF_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HCTS0_N_E, SEL_HSCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP6_31_29, STP_IVCXO27_1_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HRX0_F, SEL_HSCIF0_5),
+
+ PINMUX_IPSR_DATA(IP7_2_0, ETH_MDIO),
+ PINMUX_IPSR_DATA(IP7_2_0, RMII_MDIO),
+ PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HRTS0_N_E, SEL_HSCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP7_2_0, SIM0_D_C, SEL_SIM_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HCTS0_N_F, SEL_HSCIF0_5),
+ PINMUX_IPSR_DATA(IP7_5_3, ETH_TXD1),
+ PINMUX_IPSR_DATA(IP7_5_3, RMII_TXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_5_3, HTX0_F, SEL_HSCIF0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP7_5_3, BPFCLK_G, SEL_SIM_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_5_3, RDS_CLK_F, SEL_HSCIF0_5),
+ PINMUX_IPSR_DATA(IP7_7_6, ETH_TX_EN),
+ PINMUX_IPSR_DATA(IP7_7_6, RMII_TX_EN),
+ PINMUX_IPSR_MODSEL_DATA(IP7_7_6, SIM0_CLK_C, SEL_SIM_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_7_6, HRTS0_N_F, SEL_HSCIF0_5),
+ PINMUX_IPSR_DATA(IP7_9_8, ETH_MAGIC),
+ PINMUX_IPSR_DATA(IP7_9_8, RMII_MAGIC),
+ PINMUX_IPSR_MODSEL_DATA(IP7_9_8, SIM0_RST_C, SEL_SIM_2),
+ PINMUX_IPSR_DATA(IP7_12_10, ETH_TXD0),
+ PINMUX_IPSR_DATA(IP7_12_10, RMII_TXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP7_12_10, STP_ISCLK_1_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_12_10, TS_SDEN1_C, SEL_TSIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_12_10, GLO_SCLK_C, SEL_GPS_2),
+ PINMUX_IPSR_DATA(IP7_15_13, ETH_MDC),
+ PINMUX_IPSR_DATA(IP7_15_13, RMII_MDC),
+ PINMUX_IPSR_MODSEL_DATA(IP7_15_13, STP_ISD_1_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_15_13, TS_SPSYNC1_C, SEL_TSIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_15_13, GLO_SDATA_C, SEL_GPS_2),
+ PINMUX_IPSR_DATA(IP7_18_16, PWM0),
+ PINMUX_IPSR_MODSEL_DATA(IP7_18_16, SCIFA2_SCK_C, SEL_SCIFA2_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_18_16, STP_ISEN_1_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_18_16, TS_SDAT1_C, SEL_TSIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_18_16, GLO_SS_C, SEL_GPS_2),
+ PINMUX_IPSR_DATA(IP7_21_19, PWM1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_21_19, SCIFA2_TXD_C, SEL_SCIFA2_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_21_19, STP_ISSYNC_1_B, SEL_SSP_1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_21_19, TS_SCK1_C, SEL_TSIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP7_21_19, GLO_RFON_C, SEL_GPS_2),
+ PINMUX_IPSR_DATA(IP7_21_19, PCMOE_N),
+ PINMUX_IPSR_DATA(IP7_24_22, PWM2),
+ PINMUX_IPSR_DATA(IP7_24_22, PWMFSW0),
+ PINMUX_IPSR_MODSEL_DATA(IP7_24_22, SCIFA2_RXD_C, SEL_SCIFA2_2),
+ PINMUX_IPSR_DATA(IP7_24_22, PCMWE_N),
+ PINMUX_IPSR_MODSEL_DATA(IP7_24_22, IECLK_C, SEL_IEB_2),
+ PINMUX_IPSR_DATA(IP7_26_25, DU1_DOTCLKIN),
+ PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKC),
+ PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKOUT_C),
+ PINMUX_IPSR_MODSEL_DATA(IP7_28_27, VI0_CLK, SEL_VI0_0),
+ PINMUX_IPSR_DATA(IP7_28_27, ATACS00_N),
+ PINMUX_IPSR_DATA(IP7_28_27, AVB_RXD1),
+ PINMUX_IPSR_DATA(IP7_28_27, MII_RXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP7_30_29, VI0_DATA0_VI0_B0, SEL_VI0_0),
+ PINMUX_IPSR_DATA(IP7_30_29, ATACS10_N),
+ PINMUX_IPSR_DATA(IP7_30_29, AVB_RXD2),
+ PINMUX_IPSR_DATA(IP7_30_29, MII_RXD2),
+
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ PINMUX_GPIO_GP_ALL(),
+
+ /*IPSR0 - IPSR5*/
+ /*IPSR6*/
+ GPIO_FN(DACK0), GPIO_FN(IRQ0), GPIO_FN(INTC_IRQ0_N),
+ GPIO_FN(SSI_SCK6_B), GPIO_FN(VI1_VSYNC_N), GPIO_FN(VI1_VSYNC_N_B),
+ GPIO_FN(SSI_WS78_C), GPIO_FN(DREQ1_N), GPIO_FN(VI1_CLKENB),
+ GPIO_FN(VI1_CLKENB_B), GPIO_FN(SSI_SDATA7_C), GPIO_FN(SSI_SCK78_B),
+ GPIO_FN(DACK1), GPIO_FN(IRQ1), GPIO_FN(INTC_IRQ1_N), GPIO_FN(SSI_WS6_B),
+ GPIO_FN(SSI_SDATA8_C), GPIO_FN(DREQ2_N), GPIO_FN(HSCK1_B),
+ GPIO_FN(HCTS0_N_B), GPIO_FN(MSIOF0_TXD_B), GPIO_FN(DACK2),
+ GPIO_FN(IRQ2), GPIO_FN(INTC_IRQ2_N), GPIO_FN(SSI_SDATA6_B),
+ GPIO_FN(HRTS0_N_B), GPIO_FN(MSIOF0_RXD_B), GPIO_FN(ETH_CRS_DV),
+ GPIO_FN(RMII_CRS_DV), GPIO_FN(STP_ISCLK_0_B), GPIO_FN(TS_SDEN0_D),
+ GPIO_FN(GLO_Q0_C), GPIO_FN(SCL2_E), GPIO_FN(SCL2_CIS_E),
+ GPIO_FN(ETH_RX_ER), GPIO_FN(RMII_RX_ER), GPIO_FN(STP_ISD_0_B),
+ GPIO_FN(TS_SPSYNC0_D), GPIO_FN(GLO_Q1_C), GPIO_FN(SDA2_E),
+ GPIO_FN(SDA2_CIS_E), GPIO_FN(ETH_RXD0), GPIO_FN(RMII_RXD0),
+ GPIO_FN(STP_ISEN_0_B), GPIO_FN(TS_SDAT0_D), GPIO_FN(GLO_I0_C),
+ GPIO_FN(SCIFB1_SCK_G), GPIO_FN(SCK1_E), GPIO_FN(ETH_RXD1),
+ GPIO_FN(RMII_RXD1), GPIO_FN(HRX0_E), GPIO_FN(STP_ISSYNC_0_B),
+ GPIO_FN(TS_SCK0_D), GPIO_FN(GLO_I1_C), GPIO_FN(SCIFB1_RXD_G),
+ GPIO_FN(RX1_E), GPIO_FN(ETH_LINK), GPIO_FN(RMII_LINK), GPIO_FN(HTX0_E),
+ GPIO_FN(STP_IVCXO27_0_B), GPIO_FN(SCIFB1_TXD_G), GPIO_FN(TX1_E),
+ GPIO_FN(ETH_REF_CLK), GPIO_FN(RMII_REF_CLK), GPIO_FN(HCTS0_N_E),
+ GPIO_FN(STP_IVCXO27_1_B), GPIO_FN(HRX0_F),
+
+ /*IPSR7*/
+ GPIO_FN(ETH_MDIO), GPIO_FN(RMII_MDIO), GPIO_FN(HRTS0_N_E),
+ GPIO_FN(SIM0_D_C), GPIO_FN(HCTS0_N_F), GPIO_FN(ETH_TXD1),
+ GPIO_FN(RMII_TXD1), GPIO_FN(HTX0_F), GPIO_FN(BPFCLK_G),
+ GPIO_FN(RDS_CLK_F), GPIO_FN(ETH_TX_EN), GPIO_FN(RMII_TX_EN),
+ GPIO_FN(SIM0_CLK_C), GPIO_FN(HRTS0_N_F), GPIO_FN(ETH_MAGIC),
+ GPIO_FN(RMII_MAGIC), GPIO_FN(SIM0_RST_C), GPIO_FN(ETH_TXD0),
+ GPIO_FN(RMII_TXD0), GPIO_FN(STP_ISCLK_1_B), GPIO_FN(TS_SDEN1_C),
+ GPIO_FN(GLO_SCLK_C), GPIO_FN(ETH_MDC), GPIO_FN(RMII_MDC),
+ GPIO_FN(STP_ISD_1_B), GPIO_FN(TS_SPSYNC1_C), GPIO_FN(GLO_SDATA_C),
+ GPIO_FN(PWM0), GPIO_FN(SCIFA2_SCK_C), GPIO_FN(STP_ISEN_1_B),
+ GPIO_FN(TS_SDAT1_C), GPIO_FN(GLO_SS_C), GPIO_FN(PWM1),
+ GPIO_FN(SCIFA2_TXD_C), GPIO_FN(STP_ISSYNC_1_B), GPIO_FN(TS_SCK1_C),
+ GPIO_FN(GLO_RFON_C), GPIO_FN(PCMOE_N), GPIO_FN(PWM2), GPIO_FN(PWMFSW0),
+ GPIO_FN(SCIFA2_RXD_C), GPIO_FN(PCMWE_N), GPIO_FN(IECLK_C),
+ GPIO_FN(DU1_DOTCLKIN), GPIO_FN(AUDIO_CLKC), GPIO_FN(AUDIO_CLKOUT_C),
+ GPIO_FN(VI0_CLK), GPIO_FN(ATACS00_N), GPIO_FN(AVB_RXD1),
+ GPIO_FN(MII_RXD1), GPIO_FN(VI0_DATA0_VI0_B0), GPIO_FN(ATACS10_N),
+ GPIO_FN(AVB_RXD2), GPIO_FN(MII_RXD2),
+ /*IPSR8 - IPSR16*/
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) {
+ GP_0_31_FN, FN_IP3_17_15,
+ GP_0_30_FN, FN_IP3_14_12,
+ GP_0_29_FN, FN_IP3_11_8,
+ GP_0_28_FN, FN_IP3_7_4,
+ GP_0_27_FN, FN_IP3_3_0,
+ GP_0_26_FN, FN_IP2_28_26,
+ GP_0_25_FN, FN_IP2_25_22,
+ GP_0_24_FN, FN_IP2_21_18,
+ GP_0_23_FN, FN_IP2_17_15,
+ GP_0_22_FN, FN_IP2_14_12,
+ GP_0_21_FN, FN_IP2_11_9,
+ GP_0_20_FN, FN_IP2_8_6,
+ GP_0_19_FN, FN_IP2_5_3,
+ GP_0_18_FN, FN_IP2_2_0,
+ GP_0_17_FN, FN_IP1_29_28,
+ GP_0_16_FN, FN_IP1_27_26,
+ GP_0_15_FN, FN_IP1_25_22,
+ GP_0_14_FN, FN_IP1_21_18,
+ GP_0_13_FN, FN_IP1_17_15,
+ GP_0_12_FN, FN_IP1_14_12,
+ GP_0_11_FN, FN_IP1_11_8,
+ GP_0_10_FN, FN_IP1_7_4,
+ GP_0_9_FN, FN_IP1_3_0,
+ GP_0_8_FN, FN_IP0_30_27,
+ GP_0_7_FN, FN_IP0_26_23,
+ GP_0_6_FN, FN_IP0_22_20,
+ GP_0_5_FN, FN_IP0_19_16,
+ GP_0_4_FN, FN_IP0_15_12,
+ GP_0_3_FN, FN_IP0_11_9,
+ GP_0_2_FN, FN_IP0_8_6,
+ GP_0_1_FN, FN_IP0_5_3,
+ GP_0_0_FN, FN_IP0_2_0 }
+ },
+ { PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_1_29_FN, FN_IP6_13_11,
+ GP_1_28_FN, FN_IP6_10_9,
+ GP_1_27_FN, FN_IP6_8_6,
+ GP_1_26_FN, FN_IP6_5_3,
+ GP_1_25_FN, FN_IP6_2_0,
+ GP_1_24_FN, FN_IP5_29_27,
+ GP_1_23_FN, FN_IP5_26_24,
+ GP_1_22_FN, FN_IP5_23_21,
+ GP_1_21_FN, FN_IP5_20_18,
+ GP_1_20_FN, FN_IP5_17_15,
+ GP_1_19_FN, FN_IP5_14_13,
+ GP_1_18_FN, FN_IP5_12_10,
+ GP_1_17_FN, FN_IP5_9_6,
+ GP_1_16_FN, FN_IP5_5_3,
+ GP_1_15_FN, FN_IP5_2_0,
+ GP_1_14_FN, FN_IP4_29_27,
+ GP_1_13_FN, FN_IP4_26_24,
+ GP_1_12_FN, FN_IP4_23_21,
+ GP_1_11_FN, FN_IP4_20_18,
+ GP_1_10_FN, FN_IP4_17_15,
+ GP_1_9_FN, FN_IP4_14_12,
+ GP_1_8_FN, FN_IP4_11_9,
+ GP_1_7_FN, FN_IP4_8_6,
+ GP_1_6_FN, FN_IP4_5_3,
+ GP_1_5_FN, FN_IP4_2_0,
+ GP_1_4_FN, FN_IP3_31_29,
+ GP_1_3_FN, FN_IP3_28_26,
+ GP_1_2_FN, FN_IP3_25_23,
+ GP_1_1_FN, FN_IP3_22_20,
+ GP_1_0_FN, FN_IP3_19_18, }
+ },
+ { PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_2_29_FN, FN_IP7_15_13,
+ GP_2_28_FN, FN_IP7_12_10,
+ GP_2_27_FN, FN_IP7_9_8,
+ GP_2_26_FN, FN_IP7_7_6,
+ GP_2_25_FN, FN_IP7_5_3,
+ GP_2_24_FN, FN_IP7_2_0,
+ GP_2_23_FN, FN_IP6_31_29,
+ GP_2_22_FN, FN_IP6_28_26,
+ GP_2_21_FN, FN_IP6_25_23,
+ GP_2_20_FN, FN_IP6_22_20,
+ GP_2_19_FN, FN_IP6_19_17,
+ GP_2_18_FN, FN_IP6_16_14,
+ GP_2_17_FN, FN_VI1_DATA7_VI1_B7,
+ GP_2_16_FN, FN_IP8_27,
+ GP_2_15_FN, FN_IP8_26,
+ GP_2_14_FN, FN_IP8_25_24,
+ GP_2_13_FN, FN_IP8_23_22,
+ GP_2_12_FN, FN_IP8_21_20,
+ GP_2_11_FN, FN_IP8_19_18,
+ GP_2_10_FN, FN_IP8_17_16,
+ GP_2_9_FN, FN_IP8_15_14,
+ GP_2_8_FN, FN_IP8_13_12,
+ GP_2_7_FN, FN_IP8_11_10,
+ GP_2_6_FN, FN_IP8_9_8,
+ GP_2_5_FN, FN_IP8_7_6,
+ GP_2_4_FN, FN_IP8_5_4,
+ GP_2_3_FN, FN_IP8_3_2,
+ GP_2_2_FN, FN_IP8_1_0,
+ GP_2_1_FN, FN_IP7_30_29,
+ GP_2_0_FN, FN_IP7_28_27 }
+ },
+ { PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) {
+ GP_3_31_FN, FN_IP11_21_18,
+ GP_3_30_FN, FN_IP11_17_15,
+ GP_3_29_FN, FN_IP11_14_13,
+ GP_3_28_FN, FN_IP11_12_11,
+ GP_3_27_FN, FN_IP11_10_9,
+ GP_3_26_FN, FN_IP11_8_7,
+ GP_3_25_FN, FN_IP11_6_5,
+ GP_3_24_FN, FN_IP11_4,
+ GP_3_23_FN, FN_IP11_3_0,
+ GP_3_22_FN, FN_IP10_29_26,
+ GP_3_21_FN, FN_IP10_25_23,
+ GP_3_20_FN, FN_IP10_22_19,
+ GP_3_19_FN, FN_IP10_18_15,
+ GP_3_18_FN, FN_IP10_14_11,
+ GP_3_17_FN, FN_IP10_10_7,
+ GP_3_16_FN, FN_IP10_6_4,
+ GP_3_15_FN, FN_IP10_3_0,
+ GP_3_14_FN, FN_IP9_31_28,
+ GP_3_13_FN, FN_IP9_27_26,
+ GP_3_12_FN, FN_IP9_25_24,
+ GP_3_11_FN, FN_IP9_23_22,
+ GP_3_10_FN, FN_IP9_21_20,
+ GP_3_9_FN, FN_IP9_19_18,
+ GP_3_8_FN, FN_IP9_17_16,
+ GP_3_7_FN, FN_IP9_15_12,
+ GP_3_6_FN, FN_IP9_11_8,
+ GP_3_5_FN, FN_IP9_7_6,
+ GP_3_4_FN, FN_IP9_5_4,
+ GP_3_3_FN, FN_IP9_3_2,
+ GP_3_2_FN, FN_IP9_1_0,
+ GP_3_1_FN, FN_IP8_30_29,
+ GP_3_0_FN, FN_IP8_28 }
+ },
+ { PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) {
+ GP_4_31_FN, FN_IP14_18_16,
+ GP_4_30_FN, FN_IP14_15_12,
+ GP_4_29_FN, FN_IP14_11_9,
+ GP_4_28_FN, FN_IP14_8_6,
+ GP_4_27_FN, FN_IP14_5_3,
+ GP_4_26_FN, FN_IP14_2_0,
+ GP_4_25_FN, FN_IP13_30_29,
+ GP_4_24_FN, FN_IP13_28_26,
+ GP_4_23_FN, FN_IP13_25_23,
+ GP_4_22_FN, FN_IP13_22_19,
+ GP_4_21_FN, FN_IP13_18_16,
+ GP_4_20_FN, FN_IP13_15_13,
+ GP_4_19_FN, FN_IP13_12_10,
+ GP_4_18_FN, FN_IP13_9_7,
+ GP_4_17_FN, FN_IP13_6_3,
+ GP_4_16_FN, FN_IP13_2_0,
+ GP_4_15_FN, FN_IP12_30_28,
+ GP_4_14_FN, FN_IP12_27_25,
+ GP_4_13_FN, FN_IP12_24_23,
+ GP_4_12_FN, FN_IP12_22_20,
+ GP_4_11_FN, FN_IP12_19_17,
+ GP_4_10_FN, FN_IP12_16_14,
+ GP_4_9_FN, FN_IP12_13_11,
+ GP_4_8_FN, FN_IP12_10_8,
+ GP_4_7_FN, FN_IP12_7_6,
+ GP_4_6_FN, FN_IP12_5_4,
+ GP_4_5_FN, FN_IP12_3_2,
+ GP_4_4_FN, FN_IP12_1_0,
+ GP_4_3_FN, FN_IP11_31_30,
+ GP_4_2_FN, FN_IP11_29_27,
+ GP_4_1_FN, FN_IP11_26_24,
+ GP_4_0_FN, FN_IP11_23_22 }
+ },
+ { PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) {
+ GP_5_31_FN, FN_IP7_24_22,
+ GP_5_30_FN, FN_IP7_21_19,
+ GP_5_29_FN, FN_IP7_18_16,
+ GP_5_28_FN, FN_DU_DOTCLKIN2,
+ GP_5_27_FN, FN_IP7_26_25,
+ GP_5_26_FN, FN_DU_DOTCLKIN0,
+ GP_5_25_FN, FN_AVS2,
+ GP_5_24_FN, FN_AVS1,
+ GP_5_23_FN, FN_USB2_OVC,
+ GP_5_22_FN, FN_USB2_PWEN,
+ GP_5_21_FN, FN_IP16_7,
+ GP_5_20_FN, FN_IP16_6,
+ GP_5_19_FN, FN_USB0_OVC_VBUS,
+ GP_5_18_FN, FN_USB0_PWEN,
+ GP_5_17_FN, FN_IP16_5_3,
+ GP_5_16_FN, FN_IP16_2_0,
+ GP_5_15_FN, FN_IP15_29_28,
+ GP_5_14_FN, FN_IP15_27_26,
+ GP_5_13_FN, FN_IP15_25_23,
+ GP_5_12_FN, FN_IP15_22_20,
+ GP_5_11_FN, FN_IP15_19_18,
+ GP_5_10_FN, FN_IP15_17_16,
+ GP_5_9_FN, FN_IP15_15_14,
+ GP_5_8_FN, FN_IP15_13_12,
+ GP_5_7_FN, FN_IP15_11_9,
+ GP_5_6_FN, FN_IP15_8_6,
+ GP_5_5_FN, FN_IP15_5_3,
+ GP_5_4_FN, FN_IP15_2_0,
+ GP_5_3_FN, FN_IP14_30_28,
+ GP_5_2_FN, FN_IP14_27_25,
+ GP_5_1_FN, FN_IP14_24_22,
+ GP_5_0_FN, FN_IP14_21_19 }
+ },
+
+ /*IPSR0 - IPSR5*/
+ { PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32,
+ 3, 3, 3, 3, 3, 3, 3, 2, 3, 3, 3) {
+ /* IP6_31_29 [3] */
+ FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E,
+ FN_STP_IVCXO27_1_B, FN_HRX0_F, 0, 0, 0,
+ /* IP6_28_26 [3] */
+ FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E,
+ FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E, 0, 0,
+ /* IP6_25_23 [3] */
+ FN_ETH_RXD1, FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B,
+ FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G, FN_RX1_E,
+ /* IP6_22_20 [3] */
+ FN_ETH_RXD0, FN_RMII_RXD0, FN_STP_ISEN_0_B, FN_TS_SDAT0_D,
+ FN_GLO_I0_C, FN_SCIFB1_SCK_G, FN_SCK1_E, 0,
+ /* IP6_19_17 [3] */
+ FN_ETH_RX_ER, FN_RMII_RX_ER, FN_STP_ISD_0_B,
+ FN_TS_SPSYNC0_D, FN_GLO_Q1_C, FN_SDA2_E, FN_SDA2_CIS_E, 0,
+ /* IP6_16_14 [3] */
+ FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B,
+ FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E,
+ FN_SCL2_CIS_E, 0,
+ /* IP6_13_11 [3] */
+ FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N,
+ FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B, 0, 0,
+ /* IP6_10_9 [2] */
+ FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B, FN_MSIOF0_TXD_B,
+ /* IP6_8_6 [3] */
+ FN_DACK1, FN_IRQ1, FN_INTC_IRQ1_N, FN_SSI_WS6_B,
+ FN_SSI_SDATA8_C, 0, 0, 0,
+ /* IP6_5_3 [3] */
+ FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B,
+ FN_SSI_SDATA7_C, FN_SSI_SCK78_B, 0, 0, 0,
+ /* IP6_2_0 [3] */
+ FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B,
+ FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR7", 0xE606003C, 32,
+ 1, 2, 2, 2, 3, 3, 3, 3, 3, 2, 2, 3, 3) {
+ /* IP7_31 [1] */
+ 0, 0,
+ /* IP7_30_29 [2] */
+ FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2,
+ FN_MII_RXD2,
+ /* IP7_28_27 [2] */
+ FN_VI0_CLK, FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1,
+ /* IP7_26_25 [2] */
+ FN_DU1_DOTCLKIN, FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, 0,
+ /* IP7_24_22 [3] */
+ FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C, FN_PCMWE_N, FN_IECLK_C,
+ 0, 0, 0,
+ /* IP7_21_19 [3] */
+ FN_PWM1, FN_SCIFA2_TXD_C, FN_STP_ISSYNC_1_B, FN_TS_SCK1_C,
+ FN_GLO_RFON_C, FN_PCMOE_N, 0, 0,
+ /* IP7_18_16 [3] */
+ FN_PWM0, FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C,
+ FN_GLO_SS_C, 0, 0, 0,
+ /* IP7_15_13 [3] */
+ FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B,
+ FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, 0, 0, 0,
+ /* IP7_12_10 [3] */
+ FN_ETH_TXD0, FN_RMII_TXD0, FN_STP_ISCLK_1_B, FN_TS_SDEN1_C,
+ FN_GLO_SCLK_C, 0, 0, 0,
+ /* IP7_9_8 [2] */
+ FN_ETH_MAGIC, FN_RMII_MAGIC, FN_SIM0_RST_C, 0,
+ /* IP7_7_6 [2] */
+ FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C, FN_HRTS0_N_F,
+ /* IP7_5_3 [3] */
+ FN_ETH_TXD1, FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F,
+ 0, 0, 0,
+ /* IP7_2_0 [3] */
+ FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E,
+ FN_SIM0_D_C, FN_HCTS0_N_F, 0, 0, 0, }
+ },
+ /*IPSR8 - IPSR16*/
+ { PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } },
+ { PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_1_29_IN, GP_1_29_OUT,
+ GP_1_28_IN, GP_1_28_OUT,
+ GP_1_27_IN, GP_1_27_OUT,
+ GP_1_26_IN, GP_1_26_OUT,
+ GP_1_25_IN, GP_1_25_OUT,
+ GP_1_24_IN, GP_1_24_OUT,
+ GP_1_23_IN, GP_1_23_OUT,
+ GP_1_22_IN, GP_1_22_OUT,
+ GP_1_21_IN, GP_1_21_OUT,
+ GP_1_20_IN, GP_1_20_OUT,
+ GP_1_19_IN, GP_1_19_OUT,
+ GP_1_18_IN, GP_1_18_OUT,
+ GP_1_17_IN, GP_1_17_OUT,
+ GP_1_16_IN, GP_1_16_OUT,
+ GP_1_15_IN, GP_1_15_OUT,
+ GP_1_14_IN, GP_1_14_OUT,
+ GP_1_13_IN, GP_1_13_OUT,
+ GP_1_12_IN, GP_1_12_OUT,
+ GP_1_11_IN, GP_1_11_OUT,
+ GP_1_10_IN, GP_1_10_OUT,
+ GP_1_9_IN, GP_1_9_OUT,
+ GP_1_8_IN, GP_1_8_OUT,
+ GP_1_7_IN, GP_1_7_OUT,
+ GP_1_6_IN, GP_1_6_OUT,
+ GP_1_5_IN, GP_1_5_OUT,
+ GP_1_4_IN, GP_1_4_OUT,
+ GP_1_3_IN, GP_1_3_OUT,
+ GP_1_2_IN, GP_1_2_OUT,
+ GP_1_1_IN, GP_1_1_OUT,
+ GP_1_0_IN, GP_1_0_OUT, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL2", 0xE6052004, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_2_29_IN, GP_2_29_OUT,
+ GP_2_28_IN, GP_2_28_OUT,
+ GP_2_27_IN, GP_2_27_OUT,
+ GP_2_26_IN, GP_2_26_OUT,
+ GP_2_25_IN, GP_2_25_OUT,
+ GP_2_24_IN, GP_2_24_OUT,
+ GP_2_23_IN, GP_2_23_OUT,
+ GP_2_22_IN, GP_2_22_OUT,
+ GP_2_21_IN, GP_2_21_OUT,
+ GP_2_20_IN, GP_2_20_OUT,
+ GP_2_19_IN, GP_2_19_OUT,
+ GP_2_18_IN, GP_2_18_OUT,
+ GP_2_17_IN, GP_2_17_OUT,
+ GP_2_16_IN, GP_2_16_OUT,
+ GP_2_15_IN, GP_2_15_OUT,
+ GP_2_14_IN, GP_2_14_OUT,
+ GP_2_13_IN, GP_2_13_OUT,
+ GP_2_12_IN, GP_2_12_OUT,
+ GP_2_11_IN, GP_2_11_OUT,
+ GP_2_10_IN, GP_2_10_OUT,
+ GP_2_9_IN, GP_2_9_OUT,
+ GP_2_8_IN, GP_2_8_OUT,
+ GP_2_7_IN, GP_2_7_OUT,
+ GP_2_6_IN, GP_2_6_OUT,
+ GP_2_5_IN, GP_2_5_OUT,
+ GP_2_4_IN, GP_2_4_OUT,
+ GP_2_3_IN, GP_2_3_OUT,
+ GP_2_2_IN, GP_2_2_OUT,
+ GP_2_1_IN, GP_2_1_OUT,
+ GP_2_0_IN, GP_2_0_OUT, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL3", 0xE6053004, 32, 1) { GP_INOUTSEL(3) } },
+ { PINMUX_CFG_REG("INOUTSEL4", 0xE6054004, 32, 1) { GP_INOUTSEL(4) } },
+ { PINMUX_CFG_REG("INOUTSEL5", 0xE6055004, 32, 1) { GP_INOUTSEL(5) } },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("INDT0", 0xE6050008, 32) { GP_INDT(0) } },
+ { PINMUX_DATA_REG("INDT1", 0xE6051008, 32) {
+ 0, 0, GP_1_29_DATA, GP_1_28_DATA,
+ GP_1_27_DATA, GP_1_26_DATA, GP_1_25_DATA, GP_1_24_DATA,
+ GP_1_23_DATA, GP_1_22_DATA, GP_1_21_DATA, GP_1_20_DATA,
+ GP_1_19_DATA, GP_1_18_DATA, GP_1_17_DATA, GP_1_16_DATA,
+ GP_1_15_DATA, GP_1_14_DATA, GP_1_13_DATA, GP_1_12_DATA,
+ GP_1_11_DATA, GP_1_10_DATA, GP_1_9_DATA, GP_1_8_DATA,
+ GP_1_7_DATA, GP_1_6_DATA, GP_1_5_DATA, GP_1_4_DATA,
+ GP_1_3_DATA, GP_1_2_DATA, GP_1_1_DATA, GP_1_0_DATA }
+ },
+ { PINMUX_DATA_REG("INDT2", 0xE6052008, 32) {
+ 0, 0, GP_2_29_DATA, GP_2_28_DATA,
+ GP_2_27_DATA, GP_2_26_DATA, GP_2_25_DATA, GP_2_24_DATA,
+ GP_2_23_DATA, GP_2_22_DATA, GP_2_21_DATA, GP_2_20_DATA,
+ GP_2_19_DATA, GP_2_18_DATA, GP_2_17_DATA, GP_2_16_DATA,
+ GP_2_15_DATA, GP_2_14_DATA, GP_2_13_DATA, GP_2_12_DATA,
+ GP_2_11_DATA, GP_2_10_DATA, GP_2_9_DATA, GP_2_8_DATA,
+ GP_2_7_DATA, GP_2_6_DATA, GP_2_5_DATA, GP_2_4_DATA,
+ GP_2_3_DATA, GP_2_2_DATA, GP_2_1_DATA, GP_2_0_DATA }
+ },
+ { PINMUX_DATA_REG("INDT3", 0xE6053008, 32) { GP_INDT(3) } },
+ { PINMUX_DATA_REG("INDT4", 0xE6054008, 32) { GP_INDT(4) } },
+ { PINMUX_DATA_REG("INDT5", 0xE6055008, 32) { GP_INDT(5) } },
+ { },
+};
+
+static struct pinmux_info r8a7790_pinmux_info = {
+ .name = "r8a7790_pfc",
+
+ .unlock_reg = 0xe6060000, /* PMMR */
+
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_GP_0_0,
+ .last_gpio = GPIO_FN_MII_RXD2 /* GPIO_FN_TCLK1_B */,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7790_pinmux_init(void)
+{
+ register_pinmux(&r8a7790_pinmux_info);
+}
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __PFC_R8A7790_H__
+#define __PFC_R8A7790_H__
+
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+
+#define CPU_32_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx), \
+ PORT_1(fn, pfx##31, sfx)
+
+#define CPU_32_PORT2(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx)
+
+#if defined(CONFIG_R8A7790)
+#define CPU_32_PORT1(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx) \
+/* GP_0_0_DATA -> GP_5_31_DATA (except for GP1[30],GP1[31],GP2[30],GP2[31]) */
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ CPU_32_PORT(fn, pfx##_0_, sfx), \
+ CPU_32_PORT1(fn, pfx##_1_, sfx), \
+ CPU_32_PORT2(fn, pfx##_2_, sfx), \
+ CPU_32_PORT(fn, pfx##_3_, sfx), \
+ CPU_32_PORT(fn, pfx##_4_, sfx), \
+ CPU_32_PORT(fn, pfx##_5_, sfx)
+
+#elif defined(CONFIG_R8A7791)
+#define CPU_32_PORT1(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx), \
+ PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx), \
+ PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx)
+
+/*
+ * GP_0_0_DATA -> GP_7_25_DATA
+ * (except for GP1[26],GP1[27],GP1[28],GP1[29]),GP1[30]),GP1[31]
+ * GP7[26],GP7[27],GP7[28],GP7[29]),GP7[30]),GP7[31])
+ */
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ CPU_32_PORT(fn, pfx##_0_, sfx), \
+ CPU_32_PORT1(fn, pfx##_1_, sfx), \
+ CPU_32_PORT(fn, pfx##_2_, sfx), \
+ CPU_32_PORT(fn, pfx##_3_, sfx), \
+ CPU_32_PORT(fn, pfx##_4_, sfx), \
+ CPU_32_PORT(fn, pfx##_5_, sfx), \
+ CPU_32_PORT(fn, pfx##_6_, sfx), \
+ CPU_32_PORT1(fn, pfx##_7_, sfx)
+#else
+#error "NO support"
+#endif
+
+#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA)
+#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN, \
+ GP##pfx##_IN, GP##pfx##_OUT)
+
+#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT
+#define _GP_INDT(pfx, sfx) GP##pfx##_DATA
+
+#define GP_ALL(str) CPU_ALL_PORT(_PORT_ALL, GP, str)
+#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, , unused)
+#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, , unused)
+
+#define PORT_10_REV(fn, pfx, sfx) \
+ PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx), \
+ PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx), \
+ PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx), \
+ PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx), \
+ PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx)
+
+#define CPU_32_PORT_REV(fn, pfx, sfx) \
+ PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx), \
+ PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx), \
+ PORT_10_REV(fn, pfx, sfx)
+
+#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused)
+#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused)
+
+#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
+#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
+ FN_##ipsr, FN_##fn)
+
+#endif /* __PFC_R8A7790_H__ */
--- /dev/null
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include "pfc-r8a7790.h"
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ GP_ALL(DATA),
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ GP_ALL(IN),
+ PINMUX_INPUT_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ GP_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ GP_ALL(FN),
+
+ /* GPSR0 */
+ FN_IP0_0, FN_IP0_1, FN_IP0_2, FN_IP0_3, FN_IP0_4, FN_IP0_5,
+ FN_IP0_6, FN_IP0_7, FN_IP0_8, FN_IP0_9, FN_IP0_10, FN_IP0_11,
+ FN_IP0_12, FN_IP0_13, FN_IP0_14, FN_IP0_15, FN_IP0_18_16, FN_IP0_20_19,
+ FN_IP0_22_21, FN_IP0_24_23, FN_IP0_26_25, FN_IP0_28_27, FN_IP0_30_29,
+ FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4, FN_IP1_7_6, FN_IP1_10_8,
+ FN_IP1_13_11, FN_IP1_16_14, FN_IP1_19_17, FN_IP1_22_20,
+
+ /* GPSR1 */
+ FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0, FN_IP2_4_3,
+ FN_IP2_6_5, FN_IP2_9_7, FN_IP2_12_10, FN_IP2_15_13, FN_IP2_18_16,
+ FN_IP2_20_19, FN_IP2_22_21, FN_EX_CS0_N, FN_IP2_24_23, FN_IP2_26_25,
+ FN_IP2_29_27, FN_IP3_2_0, FN_IP3_5_3, FN_IP3_8_6, FN_RD_N,
+ FN_IP3_11_9, FN_IP3_13_12, FN_IP3_15_14 , FN_IP3_17_16 , FN_IP3_19_18,
+ FN_IP3_21_20,
+
+ /* GPSR2 */
+ FN_IP3_27_25, FN_IP3_30_28, FN_IP4_1_0, FN_IP4_4_2, FN_IP4_7_5,
+ FN_IP4_9_8, FN_IP4_12_10, FN_IP4_15_13, FN_IP4_18_16, FN_IP4_19,
+ FN_IP4_20, FN_IP4_21, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
+ FN_IP4_30_28, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_8_6, FN_IP5_11_9,
+ FN_IP5_14_12, FN_IP5_16_15, FN_IP5_19_17, FN_IP5_21_20, FN_IP5_23_22,
+ FN_IP5_25_24, FN_IP5_28_26, FN_IP5_31_29, FN_AUDIO_CLKA, FN_IP6_2_0,
+ FN_IP6_5_3, FN_IP6_7_6,
+
+ /* GPSR3 */
+ FN_IP7_5_3, FN_IP7_8_6, FN_IP7_10_9, FN_IP7_12_11, FN_IP7_14_13,
+ FN_IP7_16_15, FN_IP7_18_17, FN_IP7_20_19, FN_IP7_23_21, FN_IP7_26_24,
+ FN_IP7_29_27, FN_IP8_2_0, FN_IP8_5_3, FN_IP8_8_6, FN_IP8_11_9,
+ FN_IP8_14_12, FN_IP8_17_15, FN_IP8_20_18, FN_IP8_23_21, FN_IP8_25_24,
+ FN_IP8_27_26, FN_IP8_30_28, FN_IP9_2_0, FN_IP9_5_3, FN_IP9_6, FN_IP9_7,
+ FN_IP9_10_8, FN_IP9_11, FN_IP9_12, FN_IP9_15_13, FN_IP9_16,
+ FN_IP9_18_17,
+
+ /* GPSR4 */
+ FN_VI0_CLK, FN_IP9_20_19, FN_IP9_22_21, FN_IP9_24_23, FN_IP9_26_25,
+ FN_VI0_DATA0_VI0_B0, FN_VI0_DATA0_VI0_B1, FN_VI0_DATA0_VI0_B2,
+ FN_IP9_28_27, FN_VI0_DATA0_VI0_B4, FN_VI0_DATA0_VI0_B5,
+ FN_VI0_DATA0_VI0_B6, FN_VI0_DATA0_VI0_B7, FN_IP9_31_29, FN_IP10_2_0,
+ FN_IP10_5_3, FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_16_15,
+ FN_IP10_18_17, FN_IP10_21_19, FN_IP10_24_22, FN_IP10_26_25,
+ FN_IP10_28_27, FN_IP10_31_29, FN_IP11_2_0, FN_IP11_5_3, FN_IP11_8_6,
+ FN_IP15_1_0, FN_IP15_3_2, FN_IP15_5_4,
+
+ /* GPSR5 */
+ FN_IP11_11_9, FN_IP11_14_12, FN_IP11_16_15, FN_IP11_18_17, FN_IP11_19,
+ FN_IP11_20, FN_IP11_21, FN_IP11_22, FN_IP11_23, FN_IP11_24,
+ FN_IP11_25, FN_IP11_26, FN_IP11_27, FN_IP11_29_28, FN_IP11_31_30,
+ FN_IP12_1_0, FN_IP12_3_2, FN_IP12_6_4, FN_IP12_9_7, FN_IP12_12_10,
+ FN_IP12_15_13, FN_IP12_17_16, FN_IP12_19_18, FN_IP12_21_20,
+ FN_IP12_23_22, FN_IP12_26_24, FN_IP12_29_27, FN_IP13_2_0, FN_IP13_4_3,
+ FN_IP13_6_5, FN_IP13_9_7, FN_IP3_24_22,
+
+ /* GPSR6 */
+ FN_IP13_10, FN_IP13_11, FN_IP13_12, FN_IP13_13, FN_IP13_14,
+ FN_IP13_15, FN_IP13_18_16, FN_IP13_21_19, FN_IP13_22, FN_IP13_24_23,
+ FN_IP13_25, FN_IP13_26, FN_IP13_27, FN_IP13_30_28, FN_IP14_1_0,
+ FN_IP14_2, FN_IP14_3, FN_IP14_4, FN_IP14_5, FN_IP14_6, FN_IP14_7,
+ FN_IP14_10_8, FN_IP14_13_11, FN_IP14_16_14, FN_IP14_19_17,
+ FN_IP14_22_20, FN_IP14_25_23, FN_IP14_28_26, FN_IP14_31_29,
+
+ /* GPSR7 */
+ FN_IP15_17_15, FN_IP15_20_18, FN_IP15_23_21, FN_IP15_26_24,
+ FN_IP15_29_27, FN_IP16_2_0, FN_IP16_5_3, FN_IP16_7_6, FN_IP16_9_8,
+ FN_IP16_11_10, FN_IP6_9_8, FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14,
+ FN_IP6_18_16, FN_IP6_20_19, FN_IP6_23_21, FN_IP6_26_24, FN_IP6_29_27,
+ FN_IP7_2_0, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_14_12,
+ FN_USB0_PWEN, FN_USB0_OVC, FN_USB1_PWEN,
+
+ /* IPSR0 - IPSR10 */
+
+ /* IPSR11 */
+ FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+ FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+ FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+ FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D,
+ FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B, FN_TX4_B, FN_SCIFA4_TXD_B,
+ FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B, FN_RX4_B, FN_SCIFA4_RXD_B,
+ FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B,
+ FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B,
+ FN_VI1_CLK, FN_AVB_RXD4, FN_VI1_DATA0, FN_AVB_RXD5,
+ FN_VI1_DATA1, FN_AVB_RXD6, FN_VI1_DATA2, FN_AVB_RXD7,
+ FN_VI1_DATA3, FN_AVB_RX_ER, FN_VI1_DATA4, FN_AVB_MDIO,
+ FN_VI1_DATA5, FN_AVB_RX_DV, FN_VI1_DATA6, FN_AVB_MAGIC,
+ FN_VI1_DATA7, FN_AVB_MDC,
+ FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C,
+ FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C,
+
+ /* IPSR12 */
+ FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7,
+ FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+ FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+ FN_SCL2_D, FN_MSIOF1_RXD_E,
+ FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C, FN_SDA2_D, FN_MSIOF1_SCK_E,
+ FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+ FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+ FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+ FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+ FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+ FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C,
+ FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C,
+ FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C,
+ FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+ FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+ FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+ FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+
+ /* IPSR13 */
+ /* MOD_SEL */
+ FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+ FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+ FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+ FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+ FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2,
+ FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+ FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+ FN_SEL_QSP_0, FN_SEL_QSP_1,
+ FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+ FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2, FN_SEL_HSCIF1_3,
+ FN_SEL_HSCIF1_4,
+ FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2,
+ FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+ FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2,
+
+ /* MOD_SEL2 */
+ FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3,
+ FN_SEL_SCIF0_4,
+ FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+ FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+ FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+ FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+ FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+ FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2,
+ FN_SEL_ADG_0, FN_SEL_ADG_1,
+ FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, FN_SEL_FM_4,
+ FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2,
+ FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+ FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2,
+ FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2,
+ FN_SEL_SIM_0, FN_SEL_SIM_1,
+ FN_SEL_SSI8_0, FN_SEL_SSI8_1,
+
+ /* MOD_SEL3 */
+ FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1, FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+ FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+ FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2,
+ FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2,
+ FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2,
+ FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+ FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ FN_SEL_MMC_0, FN_SEL_MMC_1,
+ FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+ FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+ FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+ FN_SEL_IIC1_4,
+ FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2,
+
+ /* MOD_SEL4 */
+ FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+ FN_SEL_SOF1_4,
+ FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2,
+ FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2,
+ FN_SEL_RAD_0, FN_SEL_RAD_1,
+ FN_SEL_RCN_0, FN_SEL_RCN_1,
+ FN_SEL_RSP_0, FN_SEL_RSP_1,
+ FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
+ FN_SEL_SCIF2_4,
+ FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2, FN_SEL_SOF2_3,
+ FN_SEL_SOF2_4,
+ FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+ FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+ FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ EX_CS0_N_MARK, RD_N_MARK,
+
+ AUDIO_CLKA_MARK,
+
+ VI0_CLK_MARK, VI0_DATA0_VI0_B0_MARK, VI0_DATA0_VI0_B1_MARK,
+ VI0_DATA0_VI0_B2_MARK, VI0_DATA0_VI0_B4_MARK, VI0_DATA0_VI0_B5_MARK,
+ VI0_DATA0_VI0_B6_MARK, VI0_DATA0_VI0_B7_MARK,
+
+ USB0_PWEN_MARK, USB0_OVC_MARK, USB1_PWEN_MARK,
+
+ /* IPSR0 IPSR10 */
+ /* IPSR11 */
+ VI0_R5_MARK, VI2_DATA6_MARK, GLO_SDATA_B_MARK, RX0_C_MARK, SDA1_D_MARK,
+ VI0_R6_MARK, VI2_DATA7_MARK, GLO_SS_B_MARK, TX1_C_MARK, SCL4_B_MARK,
+ VI0_R7_MARK, GLO_RFON_B_MARK, RX1_C_MARK, CAN0_RX_E_MARK,
+ SDA4_B_MARK, _MARK, HRX1_D_MARK, SCIFB0_RXD_D_MARK,
+ VI1_HSYNC_N_MARK, AVB_RXD0_MARK, TS_SDATA0_B_MARK,
+ TX4_B_MARK, SCIFA4_TXD_B_MARK,
+ VI1_VSYNC_N_MARK, AVB_RXD1_MARK, TS_SCK0_B_MARK,
+ RX4_B_MARK, SCIFA4_RXD_B_MARK,
+ VI1_CLKENB_MARK, AVB_RXD2_MARK, TS_SDEN0_B_MARK,
+ VI1_FIELD_MARK, AVB_RXD3_MARK, TS_SPSYNC0_B_MARK,
+ VI1_CLK_MARK, AVB_RXD4_MARK, VI1_DATA0_MARK, AVB_RXD5_MARK,
+ VI1_DATA1_MARK, AVB_RXD6_MARK, VI1_DATA2_MARK, AVB_RXD7_MARK,
+ VI1_DATA3_MARK, AVB_RX_ER_MARK, VI1_DATA4_MARK, AVB_MDIO_MARK,
+ VI1_DATA5_MARK, AVB_RX_DV_MARK, VI1_DATA6_MARK, AVB_MAGIC_MARK,
+ VI1_DATA7_MARK, AVB_MDC_MARK,
+ ETH_MDIO_MARK, AVB_RX_CLK_MARK, SCL2_C_MARK,
+ ETH_CRS_DV_MARK, AVB_LINK_MARK, SDA2_C_MARK,
+
+ /* IPSR12 */
+ ETH_RX_ER_MARK, AVB_CRS_MARK, SCL3_MARK, SCL7_MARK,
+ ETH_RXD0_MARK, AVB_PHY_INT_MARK, SDA3_MARK, SDA7_MARK,
+ ETH_RXD1_MARK, AVB_GTXREFCLK_MARK, CAN0_TX_C_MARK,
+ SCL2_D_MARK, MSIOF1_RXD_E_MARK,
+ ETH_LINK_MARK, AVB_TXD0_MARK, CAN0_RX_C_MARK,
+ SDA2_D_MARK, MSIOF1_SCK_E_MARK,
+ ETH_REFCLK_MARK, AVB_TXD1_MARK, SCIFA3_RXD_B_MARK,
+ CAN1_RX_C_MARK, MSIOF1_SYNC_E_MARK,
+ ETH_TXD1_MARK, AVB_TXD2_MARK, SCIFA3_TXD_B_MARK,
+ CAN1_TX_C_MARK, MSIOF1_TXD_E_MARK,
+ ETH_TX_EN_MARK, AVB_TXD3_MARK, TCLK1_B_MARK, CAN_CLK_B_MARK,
+ ETH_MAGIC_MARK, AVB_TXD4_MARK, IETX_C_MARK,
+ ETH_TXD0_MARK, AVB_TXD5_MARK, IECLK_C_MARK,
+ ETH_MDC_MARK, AVB_TXD6_MARK, IERX_C_MARK,
+ STP_IVCXO27_0_MARK, AVB_TXD7_MARK, SCIFB2_TXD_D_MARK,
+ ADIDATA_B_MARK, MSIOF0_SYNC_C_MARK,
+ STP_ISCLK_0_MARK, AVB_TX_EN_MARK, SCIFB2_RXD_D_MARK,
+ ADICS_SAMP_B_MARK, MSIOF0_SCK_C_MARK,
+
+ /* IPSR13 */
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
+
+ /* OTHER IPSR0 - IPSR10 */
+ /* IPSR11 */
+ PINMUX_IPSR_DATA(IP11_2_0, VI0_R5),
+ PINMUX_IPSR_DATA(IP11_2_0, VI2_DATA6),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, GLO_SDATA_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, RX0_C, SEL_SCIF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_2_0, SDA1_D, SEL_IIC1_3),
+ PINMUX_IPSR_DATA(IP11_5_3, VI0_R6),
+ PINMUX_IPSR_DATA(IP11_5_3, VI2_DATA7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, GLO_SS_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, TX1_C, SEL_SCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_5_3, SCL4_B, SEL_IIC4_1),
+ PINMUX_IPSR_DATA(IP11_8_6, VI0_R7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, GLO_RFON_B, SEL_GPS_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, RX1_C, SEL_SCIF1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, CAN0_RX_E, SEL_CAN0_4),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SDA4_B, SEL_IIC4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, HRX1_D, SEL_HSCIF1_3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SCIFB0_RXD_D, SEL_SCIFB_3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, VI1_HSYNC_N, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_11_9, AVB_RXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TS_SDATA0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TX4_B, SEL_SCIF4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_11_9, SCIFA4_TXD_B, SEL_SCIFA4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, VI1_VSYNC_N, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_14_12, AVB_RXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, TS_SCK0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, RX4_B, SEL_SCIF4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_14_12, SCIFA4_RXD_B, SEL_SCIFA4_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_16_15, VI1_CLKENB, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_16_15, AVB_RXD2),
+ PINMUX_IPSR_MODSEL_DATA(IP11_16_15, TS_SDEN0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_18_17, VI1_FIELD, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_18_17, AVB_RXD3),
+ PINMUX_IPSR_MODSEL_DATA(IP11_18_17, TS_SPSYNC0_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MODSEL_DATA(IP11_19, VI1_CLK, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_19, AVB_RXD4),
+ PINMUX_IPSR_MODSEL_DATA(IP11_20, VI1_DATA0, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_20, AVB_RXD5),
+ PINMUX_IPSR_MODSEL_DATA(IP11_21, VI1_DATA1, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_21, AVB_RXD6),
+ PINMUX_IPSR_MODSEL_DATA(IP11_22, VI1_DATA2, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_22, AVB_RXD7),
+ PINMUX_IPSR_MODSEL_DATA(IP11_23, VI1_DATA3, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_23, AVB_RX_ER),
+ PINMUX_IPSR_MODSEL_DATA(IP11_24, VI1_DATA4, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_24, AVB_MDIO),
+ PINMUX_IPSR_MODSEL_DATA(IP11_25, VI1_DATA5, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_25, AVB_RX_DV),
+ PINMUX_IPSR_MODSEL_DATA(IP11_26, VI1_DATA6, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_26, AVB_MAGIC),
+ PINMUX_IPSR_MODSEL_DATA(IP11_27, VI1_DATA7, SEL_VI1_0),
+ PINMUX_IPSR_DATA(IP11_27, AVB_MDC),
+ PINMUX_IPSR_DATA(IP11_29_28, ETH_MDIO),
+ PINMUX_IPSR_DATA(IP11_29_28, AVB_RX_CLK),
+ PINMUX_IPSR_MODSEL_DATA(IP11_29_28, SCL2_C, SEL_IIC2_2),
+ PINMUX_IPSR_DATA(IP11_31_30, ETH_CRS_DV),
+ PINMUX_IPSR_DATA(IP11_31_30, AVB_LINK),
+ PINMUX_IPSR_MODSEL_DATA(IP11_31_30, SDA2_C, SEL_IIC2_2),
+
+ /* IPSR12 */
+ PINMUX_IPSR_DATA(IP12_1_0, ETH_RX_ER),
+ PINMUX_IPSR_DATA(IP12_1_0, AVB_CRS),
+ PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL3, SEL_IIC3_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL7, SEL_IIC7_0),
+ PINMUX_IPSR_DATA(IP12_3_2, ETH_RXD0),
+ PINMUX_IPSR_DATA(IP12_3_2, AVB_PHY_INT),
+ PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA3, SEL_IIC3_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA7, SEL_IIC7_0),
+ PINMUX_IPSR_DATA(IP12_6_4, ETH_RXD1),
+ PINMUX_IPSR_DATA(IP12_6_4, AVB_GTXREFCLK),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, CAN0_TX_C, SEL_CAN0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, SCL2_D, SEL_IIC2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_6_4, MSIOF1_RXD_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_9_7, ETH_LINK),
+ PINMUX_IPSR_DATA(IP12_9_7, AVB_TXD0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, CAN0_RX_C, SEL_CAN0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, SDA2_D, SEL_IIC2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_9_7, MSIOF1_SCK_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_12_10, ETH_REFCLK),
+ PINMUX_IPSR_DATA(IP12_12_10, AVB_TXD1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, SCIFA3_RXD_B, SEL_SCIFA3_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, CAN1_RX_C, SEL_CAN1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_12_10, MSIOF1_SYNC_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_15_13, ETH_TXD1),
+ PINMUX_IPSR_DATA(IP12_15_13, AVB_TXD2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, SCIFA3_TXD_B, SEL_SCIFA3_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, CAN1_TX_C, SEL_CAN1_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_15_13, MSIOF1_TXD_E, SEL_SOF1_4),
+ PINMUX_IPSR_DATA(IP12_17_16, ETH_TX_EN),
+ PINMUX_IPSR_DATA(IP12_17_16, AVB_TXD3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_17_16, TCLK1_B, SEL_TMU1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP12_17_16, CAN_CLK_B, SEL_CANCLK_1),
+ PINMUX_IPSR_DATA(IP12_19_18, ETH_MAGIC),
+ PINMUX_IPSR_DATA(IP12_19_18, AVB_TXD4),
+ PINMUX_IPSR_MODSEL_DATA(IP12_19_18, IETX_C, SEL_IEB_2),
+ PINMUX_IPSR_DATA(IP12_21_20, ETH_TXD0),
+ PINMUX_IPSR_DATA(IP12_21_20, AVB_TXD5),
+ PINMUX_IPSR_MODSEL_DATA(IP12_21_20, IECLK_C, SEL_IEB_2),
+ PINMUX_IPSR_DATA(IP12_23_22, ETH_MDC),
+ PINMUX_IPSR_DATA(IP12_23_22, AVB_TXD6),
+ PINMUX_IPSR_MODSEL_DATA(IP12_23_22, IERX_C, SEL_IEB_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, STP_IVCXO27_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP12_26_24, AVB_TXD7),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, SCIFB2_TXD_D, SEL_SCIFB2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, ADIDATA_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_26_24, MSIOF0_SYNC_C, SEL_SOF0_2),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, STP_ISCLK_0, SEL_SSP_0),
+ PINMUX_IPSR_DATA(IP12_29_27, AVB_TX_EN),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, SCIFB2_RXD_D, SEL_SCIFB2_3),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, ADICS_SAMP_B, SEL_RAD_1),
+ PINMUX_IPSR_MODSEL_DATA(IP12_29_27, MSIOF0_SCK_C, SEL_SOF0_2),
+
+ /* IPSR13 - IPSR16 */
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ PINMUX_GPIO_GP_ALL(),
+
+ /* OTHER, IPSR0 - IPSR10 */
+ /* IPSR11 */
+ GPIO_FN(VI0_R5), GPIO_FN(VI2_DATA6), GPIO_FN(GLO_SDATA_B),
+ GPIO_FN(RX0_C), GPIO_FN(SDA1_D),
+ GPIO_FN(VI0_R6), GPIO_FN(VI2_DATA7),
+ GPIO_FN(GLO_SS_B), GPIO_FN(TX1_C), GPIO_FN(SCL4_B),
+ GPIO_FN(VI0_R7), GPIO_FN(GLO_RFON_B),
+ GPIO_FN(RX1_C), GPIO_FN(CAN0_RX_E),
+ GPIO_FN(SDA4_B), GPIO_FN(HRX1_D), GPIO_FN(SCIFB0_RXD_D),
+ GPIO_FN(VI1_HSYNC_N), GPIO_FN(AVB_RXD0), GPIO_FN(TS_SDATA0_B),
+ GPIO_FN(TX4_B), GPIO_FN(SCIFA4_TXD_B),
+ GPIO_FN(VI1_VSYNC_N), GPIO_FN(AVB_RXD1), GPIO_FN(TS_SCK0_B),
+ GPIO_FN(RX4_B), GPIO_FN(SCIFA4_RXD_B),
+ GPIO_FN(VI1_CLKENB), GPIO_FN(AVB_RXD2), GPIO_FN(TS_SDEN0_B),
+ GPIO_FN(VI1_FIELD), GPIO_FN(AVB_RXD3), GPIO_FN(TS_SPSYNC0_B),
+ GPIO_FN(VI1_CLK), GPIO_FN(AVB_RXD4),
+ GPIO_FN(VI1_DATA0), GPIO_FN(AVB_RXD5),
+ GPIO_FN(VI1_DATA1), GPIO_FN(AVB_RXD6),
+ GPIO_FN(VI1_DATA2), GPIO_FN(AVB_RXD7),
+ GPIO_FN(VI1_DATA3), GPIO_FN(AVB_RX_ER),
+ GPIO_FN(VI1_DATA4), GPIO_FN(AVB_MDIO),
+ GPIO_FN(VI1_DATA5), GPIO_FN(AVB_RX_DV),
+ GPIO_FN(VI1_DATA6), GPIO_FN(AVB_MAGIC),
+ GPIO_FN(VI1_DATA7), GPIO_FN(AVB_MDC),
+ GPIO_FN(ETH_MDIO), GPIO_FN(AVB_RX_CLK), GPIO_FN(SCL2_C),
+ GPIO_FN(ETH_CRS_DV), GPIO_FN(AVB_LINK), GPIO_FN(SDA2_C),
+
+ /* IPSR12 */
+ GPIO_FN(ETH_RX_ER), GPIO_FN(AVB_CRS), GPIO_FN(SCL3), GPIO_FN(SCL7),
+ GPIO_FN(ETH_RXD0), GPIO_FN(AVB_PHY_INT), GPIO_FN(SDA3), GPIO_FN(SDA7),
+ GPIO_FN(ETH_RXD1), GPIO_FN(AVB_GTXREFCLK), GPIO_FN(CAN0_TX_C),
+ GPIO_FN(SCL2_D), GPIO_FN(MSIOF1_RXD_E),
+ GPIO_FN(ETH_LINK), GPIO_FN(AVB_TXD0), GPIO_FN(CAN0_RX_C),
+ GPIO_FN(SDA2_D), GPIO_FN(MSIOF1_SCK_E),
+ GPIO_FN(ETH_REFCLK), GPIO_FN(AVB_TXD1), GPIO_FN(SCIFA3_RXD_B),
+ GPIO_FN(CAN1_RX_C), GPIO_FN(MSIOF1_SYNC_E),
+ GPIO_FN(ETH_TXD1), GPIO_FN(AVB_TXD2), GPIO_FN(SCIFA3_TXD_B),
+ GPIO_FN(CAN1_TX_C), GPIO_FN(MSIOF1_TXD_E),
+ GPIO_FN(ETH_TX_EN), GPIO_FN(AVB_TXD3),
+ GPIO_FN(TCLK1_B), GPIO_FN(CAN_CLK_B),
+ GPIO_FN(ETH_MAGIC), GPIO_FN(AVB_TXD4), GPIO_FN(IETX_C),
+ GPIO_FN(ETH_TXD0), GPIO_FN(AVB_TXD5), GPIO_FN(IECLK_C),
+ GPIO_FN(ETH_MDC), GPIO_FN(AVB_TXD6), GPIO_FN(IERX_C),
+ GPIO_FN(STP_IVCXO27_0), GPIO_FN(AVB_TXD7), GPIO_FN(SCIFB2_TXD_D),
+ GPIO_FN(ADIDATA_B), GPIO_FN(MSIOF0_SYNC_C),
+ GPIO_FN(STP_ISCLK_0), GPIO_FN(AVB_TX_EN), GPIO_FN(SCIFB2_RXD_D),
+ GPIO_FN(ADICS_SAMP_B), GPIO_FN(MSIOF0_SCK_C),
+
+ /* IPSR13 - IPSR16 */
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) {
+ GP_0_31_FN, FN_IP1_22_20,
+ GP_0_30_FN, FN_IP1_19_17,
+ GP_0_29_FN, FN_IP1_16_14,
+ GP_0_28_FN, FN_IP1_13_11,
+ GP_0_27_FN, FN_IP1_10_8,
+ GP_0_26_FN, FN_IP1_7_6,
+ GP_0_25_FN, FN_IP1_5_4,
+ GP_0_24_FN, FN_IP1_3_2,
+ GP_0_23_FN, FN_IP1_1_0,
+ GP_0_22_FN, FN_IP0_30_29,
+ GP_0_21_FN, FN_IP0_28_27,
+ GP_0_20_FN, FN_IP0_26_25,
+ GP_0_19_FN, FN_IP0_24_23,
+ GP_0_18_FN, FN_IP0_22_21,
+ GP_0_17_FN, FN_IP0_20_19,
+ GP_0_16_FN, FN_IP0_18_16,
+ GP_0_15_FN, FN_IP0_15,
+ GP_0_14_FN, FN_IP0_14,
+ GP_0_13_FN, FN_IP0_13,
+ GP_0_12_FN, FN_IP0_12,
+ GP_0_11_FN, FN_IP0_11,
+ GP_0_10_FN, FN_IP0_10,
+ GP_0_9_FN, FN_IP0_9,
+ GP_0_8_FN, FN_IP0_8,
+ GP_0_7_FN, FN_IP0_7,
+ GP_0_6_FN, FN_IP0_6,
+ GP_0_5_FN, FN_IP0_5,
+ GP_0_4_FN, FN_IP0_4,
+ GP_0_3_FN, FN_IP0_3,
+ GP_0_2_FN, FN_IP0_2,
+ GP_0_1_FN, FN_IP0_1,
+ GP_0_0_FN, FN_IP0_0, }
+ },
+ { PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_1_25_FN, FN_IP3_21_20,
+ GP_1_24_FN, FN_IP3_19_18,
+ GP_1_23_FN, FN_IP3_17_16,
+ GP_1_22_FN, FN_IP3_15_14,
+ GP_1_21_FN, FN_IP3_13_12,
+ GP_1_20_FN, FN_IP3_11_9,
+ GP_1_19_FN, FN_RD_N,
+ GP_1_18_FN, FN_IP3_8_6,
+ GP_1_17_FN, FN_IP3_5_3,
+ GP_1_16_FN, FN_IP3_2_0,
+ GP_1_15_FN, FN_IP2_29_27,
+ GP_1_14_FN, FN_IP2_26_25,
+ GP_1_13_FN, FN_IP2_24_23,
+ GP_1_12_FN, FN_EX_CS0_N,
+ GP_1_11_FN, FN_IP2_22_21,
+ GP_1_10_FN, FN_IP2_20_19,
+ GP_1_9_FN, FN_IP2_18_16,
+ GP_1_8_FN, FN_IP2_15_13,
+ GP_1_7_FN, FN_IP2_12_10,
+ GP_1_6_FN, FN_IP2_9_7,
+ GP_1_5_FN, FN_IP2_6_5,
+ GP_1_4_FN, FN_IP2_4_3,
+ GP_1_3_FN, FN_IP2_2_0,
+ GP_1_2_FN, FN_IP1_31_29,
+ GP_1_1_FN, FN_IP1_28_26,
+ GP_1_0_FN, FN_IP1_25_23, }
+ },
+ { PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) {
+ GP_2_31_FN, FN_IP6_7_6,
+ GP_2_30_FN, FN_IP6_5_3,
+ GP_2_29_FN, FN_IP6_2_0,
+ GP_2_28_FN, FN_AUDIO_CLKA,
+ GP_2_27_FN, FN_IP5_31_29,
+ GP_2_26_FN, FN_IP5_28_26,
+ GP_2_25_FN, FN_IP5_25_24,
+ GP_2_24_FN, FN_IP5_23_22,
+ GP_2_23_FN, FN_IP5_21_20,
+ GP_2_22_FN, FN_IP5_19_17,
+ GP_2_21_FN, FN_IP5_16_15,
+ GP_2_20_FN, FN_IP5_14_12,
+ GP_2_19_FN, FN_IP5_11_9,
+ GP_2_18_FN, FN_IP5_8_6,
+ GP_2_17_FN, FN_IP5_5_3,
+ GP_2_16_FN, FN_IP5_2_0,
+ GP_2_15_FN, FN_IP4_30_28,
+ GP_2_14_FN, FN_IP4_27_26,
+ GP_2_13_FN, FN_IP4_25_24,
+ GP_2_12_FN, FN_IP4_23_22,
+ GP_2_11_FN, FN_IP4_21,
+ GP_2_10_FN, FN_IP4_20,
+ GP_2_9_FN, FN_IP4_19,
+ GP_2_8_FN, FN_IP4_18_16,
+ GP_2_7_FN, FN_IP4_15_13,
+ GP_2_6_FN, FN_IP4_12_10,
+ GP_2_5_FN, FN_IP4_9_8,
+ GP_2_4_FN, FN_IP4_7_5,
+ GP_2_3_FN, FN_IP4_4_2,
+ GP_2_2_FN, FN_IP4_1_0,
+ GP_2_1_FN, FN_IP3_30_28,
+ GP_2_0_FN, FN_IP3_27_25 }
+ },
+ { PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) {
+ GP_3_31_FN, FN_IP9_18_17,
+ GP_3_30_FN, FN_IP9_16,
+ GP_3_29_FN, FN_IP9_15_13,
+ GP_3_28_FN, FN_IP9_12,
+ GP_3_27_FN, FN_IP9_11,
+ GP_3_26_FN, FN_IP9_10_8,
+ GP_3_25_FN, FN_IP9_7,
+ GP_3_24_FN, FN_IP9_6,
+ GP_3_23_FN, FN_IP9_5_3,
+ GP_3_22_FN, FN_IP9_2_0,
+ GP_3_21_FN, FN_IP8_30_28,
+ GP_3_20_FN, FN_IP8_27_26,
+ GP_3_19_FN, FN_IP8_25_24,
+ GP_3_18_FN, FN_IP8_23_21,
+ GP_3_17_FN, FN_IP8_20_18,
+ GP_3_16_FN, FN_IP8_17_15,
+ GP_3_15_FN, FN_IP8_14_12,
+ GP_3_14_FN, FN_IP8_11_9,
+ GP_3_13_FN, FN_IP8_8_6,
+ GP_3_12_FN, FN_IP8_5_3,
+ GP_3_11_FN, FN_IP8_2_0,
+ GP_3_10_FN, FN_IP7_29_27,
+ GP_3_9_FN, FN_IP7_26_24,
+ GP_3_8_FN, FN_IP7_23_21,
+ GP_3_7_FN, FN_IP7_20_19,
+ GP_3_6_FN, FN_IP7_18_17,
+ GP_3_5_FN, FN_IP7_16_15,
+ GP_3_4_FN, FN_IP7_14_13,
+ GP_3_3_FN, FN_IP7_12_11,
+ GP_3_2_FN, FN_IP7_10_9,
+ GP_3_1_FN, FN_IP7_8_6,
+ GP_3_0_FN, FN_IP7_5_3 }
+ },
+ { PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) {
+ GP_4_31_FN, FN_IP15_5_4,
+ GP_4_30_FN, FN_IP15_3_2,
+ GP_4_29_FN, FN_IP15_1_0,
+ GP_4_28_FN, FN_IP11_8_6,
+ GP_4_27_FN, FN_IP11_5_3,
+ GP_4_26_FN, FN_IP11_2_0,
+ GP_4_25_FN, FN_IP10_31_29,
+ GP_4_24_FN, FN_IP10_28_27,
+ GP_4_23_FN, FN_IP10_26_25,
+ GP_4_22_FN, FN_IP10_24_22,
+ GP_4_21_FN, FN_IP10_21_19,
+ GP_4_20_FN, FN_IP10_18_17,
+ GP_4_19_FN, FN_IP10_16_15,
+ GP_4_18_FN, FN_IP10_14_12,
+ GP_4_17_FN, FN_IP10_11_9,
+ GP_4_16_FN, FN_IP10_8_6,
+ GP_4_15_FN, FN_IP10_5_3,
+ GP_4_14_FN, FN_IP10_2_0,
+ GP_4_13_FN, FN_IP9_31_29,
+ GP_4_12_FN, FN_VI0_DATA0_VI0_B7,
+ GP_4_11_FN, FN_VI0_DATA0_VI0_B6,
+ GP_4_10_FN, FN_VI0_DATA0_VI0_B5,
+ GP_4_9_FN, FN_VI0_DATA0_VI0_B4,
+ GP_4_8_FN, FN_IP9_28_27,
+ GP_4_7_FN, FN_VI0_DATA0_VI0_B2,
+ GP_4_6_FN, FN_VI0_DATA0_VI0_B1,
+ GP_4_5_FN, FN_VI0_DATA0_VI0_B0,
+ GP_4_4_FN, FN_IP9_26_25,
+ GP_4_3_FN, FN_IP9_24_23,
+ GP_4_2_FN, FN_IP9_22_21,
+ GP_4_1_FN, FN_IP9_20_19,
+ GP_4_0_FN, FN_VI0_CLK }
+ },
+ { PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) {
+ GP_5_31_FN, FN_IP3_24_22,
+ GP_5_30_FN, FN_IP13_9_7,
+ GP_5_29_FN, FN_IP13_6_5,
+ GP_5_28_FN, FN_IP13_4_3,
+ GP_5_27_FN, FN_IP13_2_0,
+ GP_5_26_FN, FN_IP12_29_27,
+ GP_5_25_FN, FN_IP12_26_24,
+ GP_5_24_FN, FN_IP12_23_22,
+ GP_5_23_FN, FN_IP12_21_20,
+ GP_5_22_FN, FN_IP12_19_18,
+ GP_5_21_FN, FN_IP12_17_16,
+ GP_5_20_FN, FN_IP12_15_13,
+ GP_5_19_FN, FN_IP12_12_10,
+ GP_5_18_FN, FN_IP12_9_7,
+ GP_5_17_FN, FN_IP12_6_4,
+ GP_5_16_FN, FN_IP12_3_2,
+ GP_5_15_FN, FN_IP12_1_0,
+ GP_5_14_FN, FN_IP11_31_30,
+ GP_5_13_FN, FN_IP11_29_28,
+ GP_5_12_FN, FN_IP11_27,
+ GP_5_11_FN, FN_IP11_26,
+ GP_5_10_FN, FN_IP11_25,
+ GP_5_9_FN, FN_IP11_24,
+ GP_5_8_FN, FN_IP11_23,
+ GP_5_7_FN, FN_IP11_22,
+ GP_5_6_FN, FN_IP11_21,
+ GP_5_5_FN, FN_IP11_20,
+ GP_5_4_FN, FN_IP11_19,
+ GP_5_3_FN, FN_IP11_18_17,
+ GP_5_2_FN, FN_IP11_16_15,
+ GP_5_1_FN, FN_IP11_14_12,
+ GP_5_0_FN, FN_IP11_11_9 }
+ },
+ { PINMUX_CFG_REG("GPSR6", 0xE606001C, 32, 1) {
+ 0, 0,
+ 0, 0,
+ GP_6_29_FN, FN_IP14_31_29,
+ GP_6_28_FN, FN_IP14_28_26,
+ GP_6_27_FN, FN_IP14_25_23,
+ GP_6_26_FN, FN_IP14_22_20,
+ GP_6_25_FN, FN_IP14_19_17,
+ GP_6_24_FN, FN_IP14_16_14,
+ GP_6_23_FN, FN_IP14_13_11,
+ GP_6_22_FN, FN_IP14_10_8,
+ GP_6_21_FN, FN_IP14_7,
+ GP_6_20_FN, FN_IP14_6,
+ GP_6_19_FN, FN_IP14_5,
+ GP_6_18_FN, FN_IP14_4,
+ GP_6_17_FN, FN_IP14_3,
+ GP_6_16_FN, FN_IP14_2,
+ GP_6_15_FN, FN_IP14_1_0,
+ GP_6_14_FN, FN_IP13_30_28,
+ GP_6_13_FN, FN_IP13_27,
+ GP_6_12_FN, FN_IP13_26,
+ GP_6_11_FN, FN_IP13_25,
+ GP_6_10_FN, FN_IP13_24_23,
+ GP_6_9_FN, FN_IP13_22,
+ 0, 0,
+ GP_6_7_FN, FN_IP13_21_19,
+ GP_6_6_FN, FN_IP13_18_16,
+ GP_6_5_FN, FN_IP13_15,
+ GP_6_4_FN, FN_IP13_14,
+ GP_6_3_FN, FN_IP13_13,
+ GP_6_2_FN, FN_IP13_12,
+ GP_6_1_FN, FN_IP13_11,
+ GP_6_0_FN, FN_IP13_10 }
+ },
+ { PINMUX_CFG_REG("GPSR7", 0xE6060074, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_7_25_FN, FN_USB1_PWEN,
+ GP_7_24_FN, FN_USB0_OVC,
+ GP_7_23_FN, FN_USB0_PWEN,
+ GP_7_22_FN, FN_IP15_14_12,
+ GP_7_21_FN, FN_IP15_11_9,
+ GP_7_20_FN, FN_IP15_8_6,
+ GP_7_19_FN, FN_IP7_2_0,
+ GP_7_18_FN, FN_IP6_29_27,
+ GP_7_17_FN, FN_IP6_26_24,
+ GP_7_16_FN, FN_IP6_23_21,
+ GP_7_15_FN, FN_IP6_20_19,
+ GP_7_14_FN, FN_IP6_18_16,
+ GP_7_13_FN, FN_IP6_15_14,
+ GP_7_12_FN, FN_IP6_13_12,
+ GP_7_11_FN, FN_IP6_11_10,
+ GP_7_10_FN, FN_IP6_9_8,
+ GP_7_9_FN, FN_IP16_11_10,
+ GP_7_8_FN, FN_IP16_9_8,
+ GP_7_7_FN, FN_IP16_7_6,
+ GP_7_6_FN, FN_IP16_5_3,
+ GP_7_5_FN, FN_IP16_2_0,
+ GP_7_4_FN, FN_IP15_29_27,
+ GP_7_3_FN, FN_IP15_26_24,
+ GP_7_2_FN, FN_IP15_23_21,
+ GP_7_1_FN, FN_IP15_20_18,
+ GP_7_0_FN, FN_IP15_17_15 }
+ },
+ /* IPSR0 - IPSR10 */
+ { PINMUX_CFG_REG_VAR("IPSR11", 0xE606004C, 32,
+ 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2,
+ 3, 3, 3, 3, 3) {
+ /* IP11_31_30 [2] */
+ FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C, 0,
+ /* IP11_29_28 [2] */
+ FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C, 0,
+ /* IP11_27 [1] */
+ FN_VI1_DATA7, FN_AVB_MDC,
+ /* IP11_26 [1] */
+ FN_VI1_DATA6, FN_AVB_MAGIC,
+ /* IP11_25 [1] */
+ FN_VI1_DATA5, FN_AVB_RX_DV,
+ /* IP11_24 [1] */
+ FN_VI1_DATA4, FN_AVB_MDIO,
+ /* IP11_23 [1] */
+ FN_VI1_DATA3, FN_AVB_RX_ER,
+ /* IP11_22 [1] */
+ FN_VI1_DATA2, FN_AVB_RXD7,
+ /* IP11_21 [1] */
+ FN_VI1_DATA1, FN_AVB_RXD6,
+ /* IP11_20 [1] */
+ FN_VI1_DATA0, FN_AVB_RXD5,
+ /* IP11_19 [1] */
+ FN_VI1_CLK, FN_AVB_RXD4,
+ /* IP11_18_17 [2] */
+ FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B, 0,
+ /* IP11_16_15 [2] */
+ FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B, 0,
+ /* IP11_14_12 [3] */
+ FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B,
+ FN_RX4_B, FN_SCIFA4_RXD_B,
+ 0, 0, 0,
+ /* IP11_11_9 [3] */
+ FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B,
+ FN_TX4_B, FN_SCIFA4_TXD_B,
+ 0, 0, 0,
+ /* IP11_8_6 [3] */
+ FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+ FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D, 0,
+ /* IP11_5_3 [3] */
+ FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+ 0, 0, 0,
+ /* IP11_2_0 [3] */
+ FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+ 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("IPSR12", 0xE6060050, 32,
+ 2, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, 2, 2) {
+ /* IP12_31_30 [2] */
+ 0, 0, 0, 0,
+ /* IP12_29_27 [3] */
+ FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+ FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+ 0, 0, 0,
+ /* IP12_26_24 [3] */
+ FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+ FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+ 0, 0, 0,
+ /* IP12_23_22 [2] */
+ FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C, 0,
+ /* IP12_21_20 [2] */
+ FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C, 0,
+ /* IP12_19_18 [2] */
+ FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C, 0,
+ /* IP12_17_16 [2] */
+ FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+ /* IP12_15_13 [3] */
+ FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+ FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+ 0, 0, 0,
+ /* IP12_12_10 [3] */
+ FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+ FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+ 0, 0, 0,
+ /* IP12_9_7 [3] */
+ FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C,
+ FN_SDA2_D, FN_MSIOF1_SCK_E,
+ 0, 0, 0,
+ /* IP12_6_4 [3] */
+ FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+ FN_SCL2_D, FN_MSIOF1_RXD_E,
+ 0, 0, 0,
+ /* IP12_3_2 [2] */
+ FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+ /* IP12_1_0 [2] */
+ FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7, }
+ },
+
+ /* IPSR13 - IPSR16 */
+
+ { PINMUX_CFG_REG_VAR("MOD_SEL", 0xE6060090, 32,
+ 1, 2, 2, 2, 3, 2, 1, 1, 1, 1,
+ 3, 2, 2, 2, 1, 2, 2, 2) {
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIF1 [2] */
+ FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+ /* SEL_SCIFB [2] */
+ FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+ /* SEL_SCIFB2 [2] */
+ FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1,
+ FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+ /* SEL_SCIFB1 [3] */
+ FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1,
+ FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+ 0, 0, 0, 0,
+ /* SEL_SCIFA1 [2] */
+ FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, 0,
+ /* SEL_SSI9 [1] */
+ FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+ /* SEL_SCFA [1] */
+ FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+ /* SEL_QSP [1] */
+ FN_SEL_QSP_0, FN_SEL_QSP_1,
+ /* SEL_SSI7 [1] */
+ FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+ /* SEL_HSCIF1 [3] */
+ FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2,
+ FN_SEL_HSCIF1_3, FN_SEL_HSCIF1_4,
+ 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_VI1 [2] */
+ FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_TMU [1] */
+ FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+ /* SEL_LBS [2] */
+ FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+ /* SEL_TSIF0 [2] */
+ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ /* SEL_SOF0 [2] */
+ FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32,
+ 3, 1, 1, 3, 2, 1, 1, 2, 2,
+ 1, 3, 2, 1, 2, 2, 2, 1, 1, 1) {
+ /* SEL_SCIF0 [3] */
+ FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
+ FN_SEL_SCIF0_3, FN_SEL_SCIF0_4,
+ 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIF [1] */
+ FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+ /* SEL_CAN0 [3] */
+ FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+ FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+ 0, 0,
+ /* SEL_CAN1 [2] */
+ FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SCIFA2 [1] */
+ FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+ /* SEL_SCIF4 [2] */
+ FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_ADG [1] */
+ FN_SEL_ADG_0, FN_SEL_ADG_1,
+ /* SEL_FM [3] */
+ FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2,
+ FN_SEL_FM_3, FN_SEL_FM_4,
+ 0, 0, 0,
+ /* SEL_SCIFA5 [2] */
+ FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_GPS [2] */
+ FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+ /* SEL_SCIFA4 [2] */
+ FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2, 0,
+ /* SEL_SCIFA3 [2] */
+ FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2, 0,
+ /* SEL_SIM [1] */
+ FN_SEL_SIM_0, FN_SEL_SIM_1,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SSI8 [1] */
+ FN_SEL_SSI8_0, FN_SEL_SSI8_1, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL3", 0xE6060098, 32,
+ 2, 2, 2, 2, 2, 2, 2, 2,
+ 1, 1, 2, 2, 3, 2, 2, 2, 1) {
+ /* SEL_HSCIF2 [2] */
+ FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1,
+ FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+ /* SEL_CANCLK [2] */
+ FN_SEL_CANCLK_0, FN_SEL_CANCLK_1,
+ FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+ /* SEL_IIC8 [2] */
+ FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2, 0,
+ /* SEL_IIC7 [2] */
+ FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2, 0,
+ /* SEL_IIC4 [2] */
+ FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2, 0,
+ /* SEL_IIC3 [2] */
+ FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+ /* SEL_SCIF3 [2] */
+ FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+ /* SEL_IEB [2] */
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ /* SEL_MMC [1] */
+ FN_SEL_MMC_0, FN_SEL_MMC_1,
+ /* SEL_SCIF5 [1] */
+ FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_IIC2 [2] */
+ FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+ /* SEL_IIC1 [3] */
+ FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+ FN_SEL_IIC1_4,
+ 0, 0, 0,
+ /* SEL_IIC0 [2] */
+ FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0, }
+ },
+ { PINMUX_CFG_REG_VAR("MOD_SEL4", 0xE606009C, 32,
+ 3, 2, 2, 1, 1, 1, 1, 3, 2,
+ 2, 3, 1, 1, 1, 2, 2, 2, 2) {
+ /* SEL_SOF1 [3] */
+ FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+ FN_SEL_SOF1_4,
+ 0, 0, 0,
+ /* SEL_HSCIF0 [2] */
+ FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, 0,
+ /* SEL_DIS [2] */
+ FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_RAD [1] */
+ FN_SEL_RAD_0, FN_SEL_RAD_1,
+ /* SEL_RCN [1] */
+ FN_SEL_RCN_0, FN_SEL_RCN_1,
+ /* SEL_RSP [1] */
+ FN_SEL_RSP_0, FN_SEL_RSP_1,
+ /* SEL_SCIF2 [3] */
+ FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
+ FN_SEL_SCIF2_3, FN_SEL_SCIF2_4,
+ 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* SEL_SOF2 [3] */
+ FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2,
+ FN_SEL_SOF2_3, FN_SEL_SOF2_4,
+ 0, 0, 0,
+ /* RESEVED [1] */
+ 0, 0,
+ /* SEL_SSI1 [1] */
+ FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+ /* SEL_SSI0 [1] */
+ FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+ /* SEL_SSP [2] */
+ FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0,
+ /* RESEVED [2] */
+ 0, 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } },
+ { PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_1_25_IN, GP_1_25_OUT,
+ GP_1_24_IN, GP_1_24_OUT,
+ GP_1_23_IN, GP_1_23_OUT,
+ GP_1_22_IN, GP_1_22_OUT,
+ GP_1_21_IN, GP_1_21_OUT,
+ GP_1_20_IN, GP_1_20_OUT,
+ GP_1_19_IN, GP_1_19_OUT,
+ GP_1_18_IN, GP_1_18_OUT,
+ GP_1_17_IN, GP_1_17_OUT,
+ GP_1_16_IN, GP_1_16_OUT,
+ GP_1_15_IN, GP_1_15_OUT,
+ GP_1_14_IN, GP_1_14_OUT,
+ GP_1_13_IN, GP_1_13_OUT,
+ GP_1_12_IN, GP_1_12_OUT,
+ GP_1_11_IN, GP_1_11_OUT,
+ GP_1_10_IN, GP_1_10_OUT,
+ GP_1_9_IN, GP_1_9_OUT,
+ GP_1_8_IN, GP_1_8_OUT,
+ GP_1_7_IN, GP_1_7_OUT,
+ GP_1_6_IN, GP_1_6_OUT,
+ GP_1_5_IN, GP_1_5_OUT,
+ GP_1_4_IN, GP_1_4_OUT,
+ GP_1_3_IN, GP_1_3_OUT,
+ GP_1_2_IN, GP_1_2_OUT,
+ GP_1_1_IN, GP_1_1_OUT,
+ GP_1_0_IN, GP_1_0_OUT, }
+ },
+ { PINMUX_CFG_REG("INOUTSEL2", 0xE6052004, 32, 1) { GP_INOUTSEL(2) } },
+ { PINMUX_CFG_REG("INOUTSEL3", 0xE6053004, 32, 1) { GP_INOUTSEL(3) } },
+ { PINMUX_CFG_REG("INOUTSEL4", 0xE6054004, 32, 1) { GP_INOUTSEL(4) } },
+ { PINMUX_CFG_REG("INOUTSEL5", 0xE6055004, 32, 1) { GP_INOUTSEL(5) } },
+ { PINMUX_CFG_REG("INOUTSEL6", 0xE6055404, 32, 1) { GP_INOUTSEL(6) } },
+ { PINMUX_CFG_REG("INOUTSEL7", 0xE6055804, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ GP_7_25_IN, GP_7_25_OUT,
+ GP_7_24_IN, GP_7_24_OUT,
+ GP_7_23_IN, GP_7_23_OUT,
+ GP_7_22_IN, GP_7_22_OUT,
+ GP_7_21_IN, GP_7_21_OUT,
+ GP_7_20_IN, GP_7_20_OUT,
+ GP_7_19_IN, GP_7_19_OUT,
+ GP_7_18_IN, GP_7_18_OUT,
+ GP_7_17_IN, GP_7_17_OUT,
+ GP_7_16_IN, GP_7_16_OUT,
+ GP_7_15_IN, GP_7_15_OUT,
+ GP_7_14_IN, GP_7_14_OUT,
+ GP_7_13_IN, GP_7_13_OUT,
+ GP_7_12_IN, GP_7_12_OUT,
+ GP_7_11_IN, GP_7_11_OUT,
+ GP_7_10_IN, GP_7_10_OUT,
+ GP_7_9_IN, GP_7_9_OUT,
+ GP_7_8_IN, GP_7_8_OUT,
+ GP_7_7_IN, GP_7_7_OUT,
+ GP_7_6_IN, GP_7_6_OUT,
+ GP_7_5_IN, GP_7_5_OUT,
+ GP_7_4_IN, GP_7_4_OUT,
+ GP_7_3_IN, GP_7_3_OUT,
+ GP_7_2_IN, GP_7_2_OUT,
+ GP_7_1_IN, GP_7_1_OUT,
+ GP_7_0_IN, GP_7_0_OUT, }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("INDT0", 0xE6050008, 32) { GP_INDT(0) } },
+ { PINMUX_DATA_REG("INDT1", 0xE6051008, 32) {
+ 0, 0, 0, 0,
+ 0, 0, GP_1_25_DATA, GP_1_24_DATA,
+ GP_1_23_DATA, GP_1_22_DATA, GP_1_21_DATA, GP_1_20_DATA,
+ GP_1_19_DATA, GP_1_18_DATA, GP_1_17_DATA, GP_1_16_DATA,
+ GP_1_15_DATA, GP_1_14_DATA, GP_1_13_DATA, GP_1_12_DATA,
+ GP_1_11_DATA, GP_1_10_DATA, GP_1_9_DATA, GP_1_8_DATA,
+ GP_1_7_DATA, GP_1_6_DATA, GP_1_5_DATA, GP_1_4_DATA,
+ GP_1_3_DATA, GP_1_2_DATA, GP_1_1_DATA, GP_1_0_DATA }
+ },
+ { PINMUX_DATA_REG("INDT2", 0xE6052008, 32) { GP_INDT(2) } },
+ { PINMUX_DATA_REG("INDT3", 0xE6053008, 32) { GP_INDT(3) } },
+ { PINMUX_DATA_REG("INDT4", 0xE6054008, 32) { GP_INDT(4) } },
+ { PINMUX_DATA_REG("INDT5", 0xE6055008, 32) { GP_INDT(5) } },
+ { PINMUX_DATA_REG("INDT6", 0xE6055408, 32) { GP_INDT(6) } },
+ { PINMUX_DATA_REG("INDT7", 0xE6055808, 32) {
+ 0, 0, 0, 0,
+ 0, 0, GP_7_25_DATA, GP_7_24_DATA,
+ GP_7_23_DATA, GP_7_22_DATA, GP_7_21_DATA, GP_7_20_DATA,
+ GP_7_19_DATA, GP_7_18_DATA, GP_7_17_DATA, GP_7_16_DATA,
+ GP_7_15_DATA, GP_7_14_DATA, GP_7_13_DATA, GP_7_12_DATA,
+ GP_7_11_DATA, GP_7_10_DATA, GP_7_9_DATA, GP_7_8_DATA,
+ GP_7_7_DATA, GP_7_6_DATA, GP_7_5_DATA, GP_7_4_DATA,
+ GP_7_3_DATA, GP_7_2_DATA, GP_7_1_DATA, GP_7_0_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info r8a7791_pinmux_info = {
+ .name = "r8a7791_pfc",
+
+ .unlock_reg = 0xe6060000, /* PMMR */
+
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_GP_0_0,
+ .last_gpio = GPIO_FN_MSIOF0_SCK_C /* GPIO_FN_CAN1_RX_B */,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7791_pinmux_init(void)
+{
+ register_pinmux(&r8a7791_pinmux_info);
+}
*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <asm/arch-armv7/globaltimer.h>
#include <asm/arch/rmobile.h>
u64 timer = get_cpu_global_timer();
timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1));
- timer /= (u64)CLK2MHZ(CONFIG_SYS_CPU_CLK);
+ do_div(timer, CLK2MHZ(CONFIG_SYS_CPU_CLK));
return timer;
}
static ulong get_time_ms(void)
{
- return (ulong)(get_time_us() / 1000);
+ u64 us = get_time_us();
+
+ do_div(us, 1000);
+ return us;
}
int timer_init(void)
obj-y := lowlevel_init.o
obj-y += misc.o timer.o reset_manager.o system_manager.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/timer.h>
+#include <asm/errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_freeze_controller *freeze_controller_base =
+ (void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Default state from cold reset is FREEZE_ALL; the global
+ * flag is set to TRUE to indicate the IO banks are frozen
+ */
+static uint32_t frzctrl_channel_freeze[FREEZE_CHANNEL_NUM]
+ = { FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN,
+ FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN};
+
+/* Freeze HPS IOs */
+void sys_mgr_frzctrl_freeze_req(void)
+{
+ u32 ioctrl_reg_offset;
+ u32 reg_value;
+ u32 reg_cfg_mask;
+ u32 channel_id;
+
+ /* select software FSM */
+ writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW, &freeze_controller_base->src);
+
+ /* Freeze channel 0 to 2 */
+ for (channel_id = 0; channel_id <= 2; channel_id++) {
+ ioctrl_reg_offset = (u32)(
+ &freeze_controller_base->vioctrl +
+ (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
+
+ /*
+ * Assert active low enrnsl, plniotri
+ * and niotri signals
+ */
+ reg_cfg_mask =
+ SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK
+ | SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+ | SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+ clrbits_le32(ioctrl_reg_offset, reg_cfg_mask);
+
+ /*
+ * Note: Delay for 20ns at min
+ * Assert active low bhniotri signal and de-assert
+ * active high csrdone
+ */
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+ | SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+ clrbits_le32(ioctrl_reg_offset, reg_cfg_mask);
+
+ /* Set global flag to indicate channel is frozen */
+ frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+ }
+
+ /* Freeze channel 3 */
+ /*
+ * Assert active low enrnsl, plniotri and
+ * niotri signals
+ */
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+ clrbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+ /*
+ * assert active low bhniotri & nfrzdrv signals,
+ * de-assert active high csrdone and assert
+ * active high frzreg and nfrzdrv signals
+ */
+ reg_value = readl(&freeze_controller_base->hioctrl);
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK;
+ reg_value
+ = (reg_value & ~reg_cfg_mask)
+ | SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+ writel(reg_value, &freeze_controller_base->hioctrl);
+
+ /*
+ * assert active high reinit signal and de-assert
+ * active high pllbiasen signals
+ */
+ reg_value = readl(&freeze_controller_base->hioctrl);
+ reg_value
+ = (reg_value &
+ ~SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK)
+ | SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK;
+ writel(reg_value, &freeze_controller_base->hioctrl);
+
+ /* Set global flag to indicate channel is frozen */
+ frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+}
+
+/* Unfreeze/Thaw HPS IOs */
+void sys_mgr_frzctrl_thaw_req(void)
+{
+ u32 ioctrl_reg_offset;
+ u32 reg_cfg_mask;
+ u32 reg_value;
+ u32 channel_id;
+
+ /* select software FSM */
+ writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW, &freeze_controller_base->src);
+
+ /* Thaw channel 0 to 2 */
+ for (channel_id = 0; channel_id <= 2; channel_id++) {
+ ioctrl_reg_offset
+ = (u32)(&freeze_controller_base->vioctrl
+ + (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
+
+ /*
+ * Assert active low bhniotri signal and
+ * de-assert active high csrdone
+ */
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+ | SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+ setbits_le32(ioctrl_reg_offset, reg_cfg_mask);
+
+ /*
+ * Note: Delay for 20ns at min
+ * de-assert active low plniotri and niotri signals
+ */
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+ | SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+ setbits_le32(ioctrl_reg_offset, reg_cfg_mask);
+
+ /*
+ * Note: Delay for 20ns at min
+ * de-assert active low enrnsl signal
+ */
+ setbits_le32(ioctrl_reg_offset,
+ SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK);
+
+ /* Set global flag to indicate channel is thawed */
+ frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+ }
+
+ /* Thaw channel 3 */
+ /* de-assert active high reinit signal */
+ clrbits_le32(&freeze_controller_base->hioctrl,
+ SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+ /*
+ * Note: Delay for 40ns at min
+ * assert active high pllbiasen signals
+ */
+ setbits_le32(&freeze_controller_base->hioctrl,
+ SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK);
+
+ /*
+ * Delay 1000 intosc. intosc is based on eosc1
+ * Use worst case which is fatest eosc1=50MHz, delay required
+ * is 1/50MHz * 1000 = 20us
+ */
+ udelay(20);
+
+ /*
+ * de-assert active low bhniotri signals,
+ * assert active high csrdone and nfrzdrv signal
+ */
+ reg_value = readl(&freeze_controller_base->hioctrl);
+ reg_value = (reg_value
+ | SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK)
+ & ~SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+ writel(reg_value, &freeze_controller_base->hioctrl);
+
+ /*
+ * Delay 33 intosc
+ * Use worst case which is fatest eosc1=50MHz, delay required
+ * is 1/50MHz * 33 = 660ns ~= 1us
+ */
+ udelay(1);
+
+ /* de-assert active low plniotri and niotri signals */
+ reg_cfg_mask
+ = SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+ | SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+
+ setbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+ /*
+ * Note: Delay for 40ns at min
+ * de-assert active high frzreg signal
+ */
+ clrbits_le32(&freeze_controller_base->hioctrl,
+ SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK);
+
+ /*
+ * Note: Delay for 40ns at min
+ * de-assert active low enrnsl signal
+ */
+ setbits_le32(&freeze_controller_base->hioctrl,
+ SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK);
+
+ /* Set global flag to indicate channel is thawed */
+ frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+}
#include <asm/arch/reset_manager.h>
#include <spl.h>
#include <asm/arch/system_manager.h>
+#include <asm/arch/freeze_controller.h>
DECLARE_GLOBAL_DATA_PTR;
void spl_board_init(void)
{
#ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
+ debug("Freezing all I/O banks\n");
+ /* freeze all IO banks */
+ sys_mgr_frzctrl_freeze_req();
+
/* configure the pin muxing through system manager */
sysmgr_pinmux_init();
#endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */
/* de-assert reset for peripherals and bridges based on handoff */
reset_deassert_peripherals_handoff();
+ debug("Unfreezing/Thaw all I/O banks\n");
+ /* unfreeze / thaw all IO banks */
+ sys_mgr_frzctrl_thaw_req();
+
/* enable console uart printing */
preloader_console_init();
}
int arch_cpu_init(void)
{
zynq_slcr_unlock();
- /* remap DDR to zero, FILTERSTART */
- writel(0, &scu_base->filter_start);
/* Device config APB, unlock the PCAP */
writel(0x757BDF0D, &devcfg_base->unlock);
writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+#if (CONFIG_SYS_SDRAM_BASE == 0)
+ /* remap DDR to zero, FILTERSTART */
+ writel(0, &scu_base->filter_start);
+
/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
writel(0x1F, &slcr_base->ocm_cfg);
/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
writel(0x0, &slcr_base->fpga_rst_ctrl);
- /* TZ_DDR_RAM, Set DDR trust zone non-secure */
- writel(0xFFFFFFFF, &slcr_base->trust_zone);
/* Set urgent bits with register */
writel(0x0, &slcr_base->ddr_urgent_sel);
/* Urgent write, ports S2/S3 */
writel(0xC, &slcr_base->ddr_urgent);
+#endif
zynq_slcr_lock();
--- /dev/null
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2013 Atmel Corporation
+# Bo Shen <voice.shen@atmel.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
+obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/atmel_mpddrc.h>
+
+static inline void atmel_mpddr_op(int mode, u32 ram_address)
+{
+ struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+
+ writel(mode, &mpddr->mr);
+ writel(0, ram_address);
+}
+
+int ddr2_init(const unsigned int ram_address,
+ const struct atmel_mpddr *mpddr_value)
+{
+ struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+ u32 ba_off, cr;
+
+ /* Compute bank offset according to NC in configuration register */
+ ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
+ if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
+ ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+
+ ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
+
+ /* Program the memory device type into the memory device register */
+ writel(mpddr_value->md, &mpddr->md);
+
+ /* Program the configuration register */
+ writel(mpddr_value->cr, &mpddr->cr);
+
+ /* Program the timing register */
+ writel(mpddr_value->tpr0, &mpddr->tpr0);
+ writel(mpddr_value->tpr1, &mpddr->tpr1);
+ writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+ /* Issue a NOP command */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+ /* A 200 us is provided to precede any signal toggle */
+ udelay(200);
+
+ /* Issue a NOP command */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+ /* Issue an all banks precharge command */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+ /* Issue an extended mode register set(EMRS2) to choose operation */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x2 << ba_off));
+
+ /* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x3 << ba_off));
+
+ /*
+ * Issue an extended mode register set(EMRS1) to enable DLL and
+ * program D.I.C (output driver impedance control)
+ */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x1 << ba_off));
+
+ /* Enable DLL reset */
+ cr = readl(&mpddr->cr);
+ writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);
+
+ /* A mode register set(MRS) cycle is issued to reset DLL */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+ /* Issue an all banks precharge command */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+ /* Two auto-refresh (CBR) cycles are provided */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+
+ /* Disable DLL reset */
+ cr = readl(&mpddr->cr);
+ writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);
+
+ /* A mode register set (MRS) cycle is issued to disable DLL reset */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+ /* Set OCD calibration in default state */
+ cr = readl(&mpddr->cr);
+ writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr);
+
+ /*
+ * An extended mode register set (EMRS1) cycle is issued
+ * to OCD default value
+ */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x1 << ba_off));
+
+ /* OCD calibration mode exit */
+ cr = readl(&mpddr->cr);
+ writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr);
+
+ /*
+ * An extended mode register set (EMRS1) cycle is issued
+ * to enable OCD exit
+ */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x1 << ba_off));
+
+ /* A nornal mode command is provided */
+ atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+ /* Perform a write access to any DDR2-SDRAM address */
+ writel(0, ram_address);
+
+ /* Write the refresh rate */
+ writel(mpddr_value->rtr, &mpddr->rtr);
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2012
+ * Markus Hubig <mhubig@imko.de>
+ * IMKO GmbH <www.imko.de>
+ *
+ * Copyright (C) 2013 DENX Software Engineering, hs@denx.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <watchdog.h>
+
+void at91_phy_reset(void)
+{
+ unsigned long erstl;
+ unsigned long start = get_timer(0);
+ unsigned long const timeout = 1000; /* 1000ms */
+ at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+ erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
+
+ /*
+ * Need to reset PHY -> 500ms reset
+ * Reset PHY by pulling the NRST line for 500ms to low. To do so
+ * disable user reset for low level on NRST pin and poll the NRST
+ * level in reset status register.
+ */
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
+
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
+
+ /* Wait for end of hardware reset */
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
+ /* avoid shutdown by watchdog */
+ WATCHDOG_RESET();
+ mdelay(10);
+
+ /* timeout for not getting stuck in an endless loop */
+ if (get_timer(start) >= timeout) {
+ puts("*** ERROR: Timeout waiting for PHY reset!\n");
+ break;
+ }
+ };
+
+ /* Restore NRST value */
+ writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+static void at91_disable_wdt(void)
+{
+ struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
+
+ writel(AT91_WDT_MR_WDDIS, &wdt->mr);
+}
+
+void at91_plla_init(u32 pllar)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(pllar, &pmc->pllar);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
+ ;
+}
+
+void at91_mck_init(u32 mckr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ writel(tmp, &pmc->mckr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+}
+
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+ return BOOT_DEVICE_MMC1;
+#endif
+ return BOOT_DEVICE_NONE;
+}
+
+u32 spl_boot_mode(void)
+{
+ switch (spl_boot_device()) {
+#ifdef CONFIG_SYS_USE_MMC
+ case BOOT_DEVICE_MMC1:
+ return MMCSD_MODE_FAT;
+ break;
+#endif
+ case BOOT_DEVICE_NONE:
+ default:
+ hang();
+ }
+}
+
+void s_init(void)
+{
+ /* disable watchdog */
+ at91_disable_wdt();
+
+ /* PMC configuration */
+ at91_pmc_init();
+
+ at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+
+ timer_init();
+
+ board_early_init_f();
+
+ preloader_console_init();
+
+ mem_init();
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE, \
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text*)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } >.sdram
+}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
__bss_end = .;
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
#if defined(CONFIG_SPL_MAX_SIZE)
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
- /DISCARD/ : { *(.ARM.exidx*) }
- /DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
+ .dynsym _end : { *(.dynsym) }
+ .hash : { *(.hash) }
+ .got.plt : { *(.got.plt) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
#define VTP_CTRL_READY (0x1 << 5)
#define VTP_CTRL_ENABLE (0x1 << 6)
#define VTP_CTRL_START_EN (0x1)
-#define PHY_DLL_LOCK_DIFF 0x0
#define DDR_CKE_CTRL_NORMAL 0x1
#define PHY_EN_DYN_PWRDN (0x1 << 20)
#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F
#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332
#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a
-#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0
#define MT47H128M16RT25E_RATIO 0x80
#define MT47H128M16RT25E_INVERT_CLKOUT 0x00
#define MT47H128M16RT25E_RD_DQS 0x12
#define MT47H128M16RT25E_PHY_GATELVL 0x00
#define MT47H128M16RT25E_PHY_WR_DATA 0x40
#define MT47H128M16RT25E_PHY_FIFO_WE 0x80
-#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1
#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B
/* Micron MT41J128M16JT-125 */
#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2
#define MT41J128MJT125_EMIF_SDREF 0x0000093B
#define MT41J128MJT125_ZQ_CFG 0x50074BE4
-#define MT41J128MJT125_DLL_LOCK_DIFF 0x1
#define MT41J128MJT125_RATIO 0x40
#define MT41J128MJT125_INVERT_CLKOUT 0x1
#define MT41J128MJT125_RD_DQS 0x3B
#define MT41J128MJT125_PHY_FIFO_WE 0x100
#define MT41J128MJT125_IOCTRL_VALUE 0x18B
+/* Micron MT41J64M16JT-125 */
+#define MT41J64MJT125_EMIF_SDCFG 0x61C04A32
+
+/* Micron MT41J256M16JT-125 */
+#define MT41J256MJT125_EMIF_SDCFG 0x61C04B32
+
/* Micron MT41J256M8HX-15E */
#define MT41J256M8HX15E_EMIF_READ_LATENCY 0x06
#define MT41J256M8HX15E_EMIF_TIM1 0x0888A39B
#define MT41J256M8HX15E_EMIF_SDCFG 0x61C04B32
#define MT41J256M8HX15E_EMIF_SDREF 0x0000093B
#define MT41J256M8HX15E_ZQ_CFG 0x50074BE4
-#define MT41J256M8HX15E_DLL_LOCK_DIFF 0x1
#define MT41J256M8HX15E_RATIO 0x40
#define MT41J256M8HX15E_INVERT_CLKOUT 0x1
#define MT41J256M8HX15E_RD_DQS 0x3B
#define MT41K256M16HA125E_EMIF_SDCFG 0x61C05332
#define MT41K256M16HA125E_EMIF_SDREF 0xC30
#define MT41K256M16HA125E_ZQ_CFG 0x50074BE4
-#define MT41K256M16HA125E_DLL_LOCK_DIFF 0x1
#define MT41K256M16HA125E_RATIO 0x80
#define MT41K256M16HA125E_INVERT_CLKOUT 0x0
#define MT41K256M16HA125E_RD_DQS 0x38
#define MT41J512M8RH125_EMIF_SDCFG 0x61C04BB2
#define MT41J512M8RH125_EMIF_SDREF 0x0000093B
#define MT41J512M8RH125_ZQ_CFG 0x50074BE4
-#define MT41J512M8RH125_DLL_LOCK_DIFF 0x1
#define MT41J512M8RH125_RATIO 0x80
#define MT41J512M8RH125_INVERT_CLKOUT 0x0
#define MT41J512M8RH125_RD_DQS 0x3B
#define K4B2G1646EBIH9_EMIF_SDCFG 0x61C052B2
#define K4B2G1646EBIH9_EMIF_SDREF 0x00000C30
#define K4B2G1646EBIH9_ZQ_CFG 0x50074BE4
-#define K4B2G1646EBIH9_DLL_LOCK_DIFF 0x1
#define K4B2G1646EBIH9_RATIO 0x80
#define K4B2G1646EBIH9_INVERT_CLKOUT 0x0
#define K4B2G1646EBIH9_RD_DQS 0x35
struct ddr_cmd_regs {
unsigned int resv0[7];
unsigned int cm0csratio; /* offset 0x01C */
- unsigned int resv1[2];
- unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int resv1[3];
unsigned int cm0iclkout; /* offset 0x02C */
unsigned int resv2[8];
unsigned int cm1csratio; /* offset 0x050 */
- unsigned int resv3[2];
- unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int resv3[3];
unsigned int cm1iclkout; /* offset 0x060 */
unsigned int resv4[8];
unsigned int cm2csratio; /* offset 0x084 */
- unsigned int resv5[2];
- unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int resv5[3];
unsigned int cm2iclkout; /* offset 0x094 */
unsigned int resv6[3];
};
unsigned int cm0configclk; /* offset 0x010 */
unsigned int resv1[2];
unsigned int cm0csratio; /* offset 0x01C */
- unsigned int resv2[2];
- unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int resv2[3];
unsigned int cm0iclkout; /* offset 0x02C */
unsigned int resv3[4];
unsigned int cm1config; /* offset 0x040 */
unsigned int cm1configclk; /* offset 0x044 */
unsigned int resv4[2];
unsigned int cm1csratio; /* offset 0x050 */
- unsigned int resv5[2];
- unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int resv5[3];
unsigned int cm1iclkout; /* offset 0x060 */
unsigned int resv6[4];
unsigned int cm2config; /* offset 0x074 */
unsigned int cm2configclk; /* offset 0x078 */
unsigned int resv7[2];
unsigned int cm2csratio; /* offset 0x084 */
- unsigned int resv8[2];
- unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int resv8[3];
unsigned int cm2iclkout; /* offset 0x094 */
unsigned int resv9[12];
unsigned int dt0rdsratio0; /* offset 0x0C8 */
unsigned long cmd0csratio;
unsigned long cmd0csforce;
unsigned long cmd0csdelay;
- unsigned long cmd0dldiff;
unsigned long cmd0iclkout;
unsigned long cmd1csratio;
unsigned long cmd1csforce;
unsigned long cmd1csdelay;
- unsigned long cmd1dldiff;
unsigned long cmd1iclkout;
unsigned long cmd2csratio;
unsigned long cmd2csforce;
unsigned long cmd2csdelay;
- unsigned long cmd2dldiff;
unsigned long cmd2iclkout;
};
unsigned long datagiratio0;
unsigned long datafwsratio0;
unsigned long datawrsratio0;
- unsigned long datauserank0delay;
- unsigned long datadldiff0;
};
/**
void at91_udp_hw_init(void);
void at91_uhp_hw_init(void);
void at91_lcd_hw_init(void);
+void at91_plla_init(u32 pllar);
+void at91_mck_init(u32 mckr);
+void at91_pmc_init(void);
+void mem_init(void);
+void at91_phy_reset(void);
#endif /* AT91_COMMON_H */
#define AT91_PIO_PORTD 0x3
#define AT91_PIO_PORTE 0x4
-#ifdef CONFIG_AT91_LEGACY
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-#endif
-
#endif
#define AT91_PIT_MR_PIV_MASK(x) (x & 0x000fffff)
#define AT91_PIT_MR_PIV(x) (x & AT91_PIT_MR_PIV_MASK)
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
-#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
-#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
-#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-
-#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
-#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-
-#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
-#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
-#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
-
-#endif /* CONFIG_AT91_LEGACY */
#endif
#ifndef AT91_PMC_H
#define AT91_PMC_H
+#ifdef __ASSEMBLY__
+
#define AT91_ASM_PMC_MOR (ATMEL_BASE_PMC + 0x20)
#define AT91_ASM_PMC_PLLAR (ATMEL_BASE_PMC + 0x28)
#define AT91_ASM_PMC_PLLBR (ATMEL_BASE_PMC + 0x2c)
#define AT91_ASM_PMC_MCKR (ATMEL_BASE_PMC + 0x30)
#define AT91_ASM_PMC_SR (ATMEL_BASE_PMC + 0x68)
-#ifndef __ASSEMBLY__
+#else
#include <asm/types.h>
#define AT91_PMC_PLLXR_DIV(x) (x & 0xFF)
#define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8)
#define AT91_PMC_PLLXR_OUT(x) ((x & 0x03) << 14)
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7F) << 18)
+#else
#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7FF) << 16)
+#endif
#define AT91_PMC_PLLAR_29 0x20000000
#define AT91_PMC_PLLBR_USBDIV_1 0x00000000
#define AT91_PMC_PLLBR_USBDIV_2 0x10000000
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
#endif
-#define AT91_PMC_MCKR_PLLADIV_1 0x00001000
-#define AT91_PMC_MCKR_PLLADIV_2 0x00002000
+#define AT91_PMC_MCKR_PLLADIV_1 0x00000000
+#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
#define AT91_PMC_IXR_MOSCS 0x00000001
#define AT91_PMC_IXR_LOCKA 0x00000002
#define AT91_PMC_IXR_PCKRDY2 0x00000400
#define AT91_PMC_IXR_PCKRDY3 0x00000800
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-#endif
-
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-#endif
-
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-#endif
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-#endif
+
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-#endif
+
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_PLLA_WR_ERRATA (1 << 29) /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-#endif
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register */
-#endif
#define AT91_PMC_USBS_USB_PLLA (0x0) /* USB Clock Input is PLLA */
#define AT91_PMC_USBS_USB_UPLL (0x1) /* USB Clock Input is UPLL */
#define AT91_PMC_USBS_USB_PLLB (0x1) /* USB Clock Input is PLLB, AT91SAM9N12 only */
#define AT91_PMC_USBDIV_8 (0x7 << 8) /* USB Clock divided by 8 */
#define AT91_PMC_USBDIV_10 (0x9 << 8) /* USB Clock divided by 10 */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-#endif
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
-#endif
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
-#endif /* CONFIG_AT91_LEGACY */
#endif
#define AT91_SPI_PTSR 0x0124 /* PDC Transfer Status Register */
-#endif /* CONFIG_AT91_LEGACY */
+#endif /* CONFIG_ATMEL_LEGACY */
#endif
#define AT91_WDT_MR_WDDBGHLT 0x10000000
#define AT91_WDT_MR_WDIDLEHLT 0x20000000
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
-#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
-#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
-#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
-#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
-#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
-#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
-#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
-#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
-#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
-#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-
-#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
-#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
-#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
-
-#endif /* CONFIG_AT91_LEGACY */
#endif
#define AT91_RSTC_BASE 0xfffffd00
#define AT91_PIT_BASE 0xfffffd30
-#ifdef CONFIG_AT91_LEGACY
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS 0xfff78000
-#define AT91CAP9_BASE_TCB0 0xfff7c000
-#define AT91CAP9_BASE_TC0 0xfff7c000
-#define AT91CAP9_BASE_TC1 0xfff7c040
-#define AT91CAP9_BASE_TC2 0xfff7c080
-#define AT91CAP9_BASE_MCI0 0xfff80000
-#define AT91CAP9_BASE_MCI1 0xfff84000
-#define AT91CAP9_BASE_TWI 0xfff88000
-#define AT91CAP9_BASE_US0 0xfff8c000
-#define AT91CAP9_BASE_US1 0xfff90000
-#define AT91CAP9_BASE_US2 0xfff94000
-#define AT91CAP9_BASE_SSC0 0xfff98000
-#define AT91CAP9_BASE_SSC1 0xfff9c000
-#define AT91CAP9_BASE_AC97C 0xfffa0000
-#define AT91CAP9_BASE_SPI0 0xfffa4000
-#define AT91CAP9_BASE_SPI1 0xfffa8000
-#define AT91CAP9_BASE_CAN 0xfffac000
-#define AT91CAP9_BASE_PWMC 0xfffb8000
-#define AT91CAP9_BASE_EMAC 0xfffbc000
-#define AT91CAP9_BASE_ADC 0xfffc0000
-#define AT91CAP9_BASE_ISI 0xfffc4000
-#define AT91_BASE_SYS 0xffffe200
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
-#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR_REVB (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR_REVC (0xfffffd60 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91CAP9_BASE_US0
-#define AT91_USART1 AT91CAP9_BASE_US1
-#define AT91_USART2 AT91CAP9_BASE_US2
-
-/*
- * SCKCR flags
- */
-#define AT91CAP9_SCKCR_RCEN (1 << 0) /* RC Oscillator Enable */
-#define AT91CAP9_SCKCR_OSC32EN (1 << 1) /* 32kHz Oscillator Enable */
-#define AT91CAP9_SCKCR_OSC32BYP (1 << 2) /* 32kHz Oscillator Bypass */
-#define AT91CAP9_SCKCR_OSCSEL (1 << 3) /* Slow Clock Selector */
-#define AT91CAP9_SCKCR_OSCSEL_RC (0 << 3)
-#define AT91CAP9_SCKCR_OSCSEL_32 (1 << 3)
-
-#endif /* CONFIG_AT91_LEGACY */
/*
* Internal Memory.
*/
#define AT91_SMC_MODE_PS_16 0x20000000
#define AT91_SMC_MODE_PS_32 0x30000000
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-
-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-
-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-#define AT91_SMC_TDF_(x) ((x) << 16)
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-#define AT91_SMC_PS (3 << 28) /* Page Size */
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
-#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
-#endif
#endif
--- /dev/null
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ATMEL_MPDDRC_H__
+#define __ATMEL_MPDDRC_H__
+
+/*
+ * Only define the needed register in mpddr
+ * If other register needed, will add them later
+ */
+struct atmel_mpddr {
+ u32 mr;
+ u32 rtr;
+ u32 cr;
+ u32 tpr0;
+ u32 tpr1;
+ u32 tpr2;
+ u32 reserved[2];
+ u32 md;
+};
+
+int ddr2_init(const unsigned int ram_address,
+ const struct atmel_mpddr *mpddr);
+
+/* Bit field in mode register */
+#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD 0x0
+#define ATMEL_MPDDRC_MR_MODE_NOP_CMD 0x1
+#define ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD 0x2
+#define ATMEL_MPDDRC_MR_MODE_LMR_CMD 0x3
+#define ATMEL_MPDDRC_MR_MODE_RFSH_CMD 0x4
+#define ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD 0x5
+#define ATMEL_MPDDRC_MR_MODE_DEEP_CMD 0x6
+#define ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD 0x7
+
+/* Bit field in configuration register */
+#define ATMEL_MPDDRC_CR_NC_MASK 0x3
+#define ATMEL_MPDDRC_CR_NC_COL_9 0x0
+#define ATMEL_MPDDRC_CR_NC_COL_10 0x1
+#define ATMEL_MPDDRC_CR_NC_COL_11 0x2
+#define ATMEL_MPDDRC_CR_NC_COL_12 0x3
+#define ATMEL_MPDDRC_CR_NR_MASK (0x3 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_11 (0x0 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_12 (0x1 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_13 (0x2 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_14 (0x3 << 2)
+#define ATMEL_MPDDRC_CR_CAS_MASK (0x7 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS2 (0x2 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS3 (0x3 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS4 (0x4 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS5 (0x5 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS6 (0x6 << 4)
+#define ATMEL_MPDDRC_CR_DLL_RESET_ENABLED (0x1 << 7)
+#define ATMEL_MPDDRC_CR_DIC_DS (0x1 << 8)
+#define ATMEL_MPDDRC_CR_DIS_DLL (0x1 << 9)
+#define ATMEL_MPDDRC_CR_OCD_DEFAULT (0x7 << 12)
+#define ATMEL_MPDDRC_CR_ENRDM_ON (0x1 << 17)
+#define ATMEL_MPDDRC_CR_NB_8BANKS (0x1 << 20)
+#define ATMEL_MPDDRC_CR_NDQS_DISABLED (0x1 << 21)
+#define ATMEL_MPDDRC_CR_DECOD_INTERLEAVED (0x1 << 22)
+#define ATMEL_MPDDRC_CR_UNAL_SUPPORTED (0x1 << 23)
+
+/* Bit field in timing parameter 0 register */
+#define ATMEL_MPDDRC_TPR0_TRAS_OFFSET 0
+#define ATMEL_MPDDRC_TPR0_TRAS_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TRCD_OFFSET 4
+#define ATMEL_MPDDRC_TPR0_TRCD_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TWR_OFFSET 8
+#define ATMEL_MPDDRC_TPR0_TWR_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TRC_OFFSET 12
+#define ATMEL_MPDDRC_TPR0_TRC_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TRP_OFFSET 16
+#define ATMEL_MPDDRC_TPR0_TRP_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TRRD_OFFSET 20
+#define ATMEL_MPDDRC_TPR0_TRRD_MASK 0xf
+#define ATMEL_MPDDRC_TPR0_TWTR_OFFSET 24
+#define ATMEL_MPDDRC_TPR0_TWTR_MASK 0x7
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_OFFSET 27
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_MASK 0x1
+#define ATMEL_MPDDRC_TPR0_TMRD_OFFSET 28
+#define ATMEL_MPDDRC_TPR0_TMRD_MASK 0xf
+
+/* Bit field in timing parameter 1 register */
+#define ATMEL_MPDDRC_TPR1_TRFC_OFFSET 0
+#define ATMEL_MPDDRC_TPR1_TRFC_MASK 0x7f
+#define ATMEL_MPDDRC_TPR1_TXSNR_OFFSET 8
+#define ATMEL_MPDDRC_TPR1_TXSNR_MASK 0xff
+#define ATMEL_MPDDRC_TPR1_TXSRD_OFFSET 16
+#define ATMEL_MPDDRC_TPR1_TXSRD_MASK 0xff
+#define ATMEL_MPDDRC_TPR1_TXP_OFFSET 24
+#define ATMEL_MPDDRC_TPR1_TXP_MASK 0xf
+
+/* Bit field in timing parameter 2 register */
+#define ATMEL_MPDDRC_TPR2_TXARD_OFFSET 0
+#define ATMEL_MPDDRC_TPR2_TXARD_MASK 0xf
+#define ATMEL_MPDDRC_TPR2_TXARDS_OFFSET 4
+#define ATMEL_MPDDRC_TPR2_TXARDS_MASK 0xf
+#define ATMEL_MPDDRC_TPR2_TRPA_OFFSET 8
+#define ATMEL_MPDDRC_TPR2_TRPA_MASK 0xf
+#define ATMEL_MPDDRC_TPR2_TRTP_OFFSET 12
+#define ATMEL_MPDDRC_TPR2_TRTP_MASK 0x7
+#define ATMEL_MPDDRC_TPR2_TFAW_OFFSET 16
+#define ATMEL_MPDDRC_TPR2_TFAW_MASK 0xf
+
+/* Bit field in Memory Device Register */
+#define ATMEL_MPDDRC_MD_LPDDR_SDRAM 0x3
+#define ATMEL_MPDDRC_MD_DDR2_SDRAM 0x6
+#define ATMEL_MPDDRC_MD_DBW_MASK (0x1 << 4)
+#define ATMEL_MPDDRC_MD_DBW_32_BITS (0x0 << 4)
+#define ATMEL_MPDDRC_MD_DBW_16_BITS (0x1 << 4)
+
+#endif
#ifdef CONFIG_ATMEL_LEGACY
-#define PIN_BASE 32
+#define PIN_BASE 0
#define MAX_GPIO_BANKS 5
#define at91_set_gpio_value(x, y) at91_set_pio_value(x, y)
#define at91_get_gpio_value(x) at91_get_pio_value(x)
#endif
-#endif
+
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+#define GPIO_PIN_PA(x) (GPIO_PIOA_BASE + (x))
+#define GPIO_PIN_PB(x) (GPIO_PIOB_BASE + (x))
+#define GPIO_PIN_PC(x) (GPIO_PIOC_BASE + (x))
+#define GPIO_PIN_PD(x) (GPIO_PIOD_BASE + (x))
+#define GPIO_PIN_PE(x) (GPIO_PIOE_BASE + (x))
+
+static inline unsigned at91_gpio_to_port(unsigned gpio)
+{
+ return gpio / 32;
+}
+
+static inline unsigned at91_gpio_to_pin(unsigned gpio)
+{
+ return gpio % 32;
+}
+
+#endif /* __ASM_ARCH_AT91_GPIO_H */
#define ARCH_EXID_SAMA5D33 0x00414300
#define ARCH_EXID_SAMA5D34 0x00414301
#define ARCH_EXID_SAMA5D35 0x00584300
+#define ARCH_EXID_SAMA5D36 0x00004301
#define cpu_is_sama5d3() (get_chip_id() == ARCH_ID_SAMA5D3)
#define cpu_is_sama5d31() (cpu_is_sama5d3() && \
(get_extension_chip_id() == ARCH_EXID_SAMA5D34))
#define cpu_is_sama5d35() (cpu_is_sama5d3() && \
(get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+#define cpu_is_sama5d36() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D36))
/*
* User Peripherals physical base addresses.
--- /dev/null
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+enum {
+ BOOT_DEVICE_NONE,
+#ifdef CONFIG_SYS_USE_MMC
+ BOOT_DEVICE_MMC1,
+ BOOT_DEVICE_MMC2,
+ BOOT_DEVICE_MMC2_2,
+#endif
+};
+
+#endif
dv_reg rsvd[13];
dv_reg kick0;
dv_reg kick1;
- dv_reg rsvd1[53];
+ dv_reg rsvd1[52];
dv_reg mstpri[3];
+ dv_reg rsvd2;
dv_reg pinmux[20];
dv_reg suspsrc;
dv_reg chipsig;
*/
#define DWMCI_CLKSEL 0x09C
-#define DWMCI_SHIFT_0 0x0
-#define DWMCI_SHIFT_1 0x1
-#define DWMCI_SHIFT_2 0x2
-#define DWMCI_SHIFT_3 0x3
#define DWMCI_SET_SAMPLE_CLK(x) (x)
#define DWMCI_SET_DRV_CLK(x) ((x) << 16)
#define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
int s5p_sdhci_init(u32 regbase, int index, int bus_width);
-static inline unsigned int s5p_mmc_init(int index, int bus_width)
+static inline int s5p_mmc_init(int index, int bus_width)
{
unsigned int base = samsung_get_base_mmc() +
(S5P_MMC_DEV_OFFSET * index);
unsigned int gnss_rtc_out_ctrl;
unsigned char res2[0x1ec];
unsigned int system_power_down_ctrl;
- unsigned char res3[0x1];
+ unsigned int res3;
unsigned int system_power_down_option;
unsigned char res4[0x1f4];
unsigned int swreset;
#define EXYNOS_SPI_MAX_FREQ 50000000
#define SPI_TIMEOUT_MS 10
+#define SF_READ_DATA_CMD 0x3
/* SPI_CHCFG */
#define SPI_CH_HS_EN (1 << 6)
#define ICK_DSS_ON 0x00000001
#define FCK_CAM_ON 0x00000001
#define ICK_CAM_ON 0x00000001
-#define FCK_PER_ON 0x0003ffff
-#define ICK_PER_ON 0x0003ffff
/* Used to index into DPLL parameter tables */
typedef struct {
#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000)
#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000)
#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000)
+#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000)
/* General Purpose Timers */
#define OMAP34XX_GPT1 0x48318000
DECLARE_GLOBAL_DATA_PTR;
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
struct omap_sysinfo {
char *board_string;
};
#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (1 << 25)
+/* CM_L3INIT_SATA_CLKCTRL */
+#define SATA_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
/* CM_WKUP_GPTIMER1_CLKCTRL */
#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24)
/* QSPI */
#define QSPI_BASE 0x4B300000
+/* SATA */
+#define DWC_AHSATA_BASE 0x4A140000
+
/*
* Hardware Register Details
*/
u32 ctrl_ddrio_1;
u32 ctrl_ddrio_2;
u32 ctrl_emif_sdram_config_ext;
+ u32 ctrl_emif_sdram_config_ext_final;
u32 ctrl_ddr_ctrl_ext_0;
};
--- /dev/null
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE (OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG 0x00
+#define TI_SATA_CDRLOCK 0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0 (1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK (0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK (0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE 0x0
+#define TI_SATA_STANDBY_NO (0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE (0x3 << 4)
+#define TI_SATA_STANDBY_SMART (0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE 0x0
+#define TI_SATA_IDLE_NO (0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE (0x3 << 2)
+#define TI_SATA_IDLE_SMART (0x2 << 2)
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int omap_sata_init(void);
+#else
+static inline int omap_sata_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_SCSI_AHCI_PLAT */
+
+#endif /* _TI_SATA_H */
#elif defined(CONFIG_R8A7740)
#include "r8a7740-gpio.h"
void r8a7740_pinmux_init(void);
+#elif defined(CONFIG_R8A7790)
+#include "r8a7790-gpio.h"
+void r8a7790_pinmux_init(void);
+#elif defined(CONFIG_R8A7791)
+#include "r8a7791-gpio.h"
+void r8a7791_pinmux_init(void);
#endif
#endif /* __ASM_ARCH_GPIO_H */
--- /dev/null
+#ifndef __ASM_R8A7790_H__
+#define __ASM_R8A7790_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+ GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+ GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+ GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+ GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+ GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+ GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+ GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+ GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+ GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+ GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+ GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+ GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+ GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+ GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
+ GPIO_GP_1_28, GPIO_GP_1_29,
+
+ GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+ GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+ GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+ GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+ GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+ GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+ GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+ GPIO_GP_2_28, GPIO_GP_2_29,
+
+ GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+ GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+ GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+ GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+ GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+ GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+ GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+ GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+ GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+ GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+ GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+ GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+ GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+ GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+ GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+ GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+ GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+ GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+ GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+ GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
+ GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
+ GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
+ GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
+ GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
+
+ GPIO_FN_VI1_DATA7_VI1_B7, GPIO_FN_USB0_PWEN, GPIO_FN_USB0_OVC_VBUS,
+ GPIO_FN_USB2_PWEN, GPIO_FN_USB2_OVC, GPIO_FN_AVS1, GPIO_FN_AVS2,
+ GPIO_FN_DU_DOTCLKIN0, GPIO_FN_DU_DOTCLKIN2,
+
+ /* IPSR0 */
+ GPIO_FN_D1, GPIO_FN_MSIOF3_SYNC_B, GPIO_FN_VI3_DATA1, GPIO_FN_VI0_G5,
+ GPIO_FN_VI0_G5_B, GPIO_FN_D2, GPIO_FN_MSIOF3_RXD_B, GPIO_FN_VI3_DATA2,
+ GPIO_FN_VI0_G6, GPIO_FN_VI0_G6_B, GPIO_FN_D3, GPIO_FN_MSIOF3_TXD_B,
+ GPIO_FN_VI3_DATA3, GPIO_FN_VI0_G7, GPIO_FN_VI0_G7_B, GPIO_FN_D4,
+ GPIO_FN_SCIFB1_RXD_F, GPIO_FN_SCIFB0_RXD_C, GPIO_FN_VI3_DATA4,
+ GPIO_FN_VI0_R0, GPIO_FN_VI0_R0_B, GPIO_FN_RX0_B, GPIO_FN_D5,
+ GPIO_FN_SCIFB1_TXD_F, GPIO_FN_SCIFB0_TXD_C, GPIO_FN_VI3_DATA5,
+ GPIO_FN_VI0_R1, GPIO_FN_VI0_R1_B, GPIO_FN_TX0_B, GPIO_FN_D6,
+ GPIO_FN_SCL2_C, GPIO_FN_VI3_DATA6, GPIO_FN_VI0_R2, GPIO_FN_VI0_R2_B,
+ GPIO_FN_SCL2_CIS_C, GPIO_FN_D7, GPIO_FN_AD_DI_B, GPIO_FN_SDA2_C,
+ GPIO_FN_VI3_DATA7, GPIO_FN_VI0_R3, GPIO_FN_VI0_R3_B, GPIO_FN_SDA2_CIS_C,
+ GPIO_FN_D8, GPIO_FN_SCIFA1_SCK_C, GPIO_FN_AVB_TXD0, GPIO_FN_MII_TXD0,
+ GPIO_FN_VI0_G0, GPIO_FN_VI0_G0_B, GPIO_FN_VI2_DATA0_VI2_B0,
+
+ /* IPSR1 */
+ GPIO_FN_D9, GPIO_FN_SCIFA1_RXD_C, GPIO_FN_AVB_TXD1, GPIO_FN_MII_TXD1,
+ GPIO_FN_VI0_G1, GPIO_FN_VI0_G1_B, GPIO_FN_VI2_DATA1_VI2_B1, GPIO_FN_D10,
+ GPIO_FN_SCIFA1_TXD_C, GPIO_FN_AVB_TXD2, GPIO_FN_MII_TXD2,
+ GPIO_FN_VI0_G2, GPIO_FN_VI0_G2_B, GPIO_FN_VI2_DATA2_VI2_B2, GPIO_FN_D11,
+ GPIO_FN_SCIFA1_CTS_N_C, GPIO_FN_AVB_TXD3, GPIO_FN_MII_TXD3,
+ GPIO_FN_VI0_G3, GPIO_FN_VI0_G3_B, GPIO_FN_VI2_DATA3_VI2_B3,
+ GPIO_FN_D12, GPIO_FN_SCIFA1_RTS_N_C, GPIO_FN_AVB_TXD4,
+ GPIO_FN_VI0_HSYNC_N, GPIO_FN_VI0_HSYNC_N_B, GPIO_FN_VI2_DATA4_VI2_B4,
+ GPIO_FN_D13, GPIO_FN_AVB_TXD5, GPIO_FN_VI0_VSYNC_N,
+ GPIO_FN_VI0_VSYNC_N_B, GPIO_FN_VI2_DATA5_VI2_B5, GPIO_FN_D14,
+ GPIO_FN_SCIFB1_RXD_C, GPIO_FN_AVB_TXD6, GPIO_FN_RX1_B,
+ GPIO_FN_VI0_CLKENB, GPIO_FN_VI0_CLKENB_B, GPIO_FN_VI2_DATA6_VI2_B6,
+ GPIO_FN_D15, GPIO_FN_SCIFB1_TXD_C, GPIO_FN_AVB_TXD7, GPIO_FN_TX1_B,
+ GPIO_FN_VI0_FIELD, GPIO_FN_VI0_FIELD_B, GPIO_FN_VI2_DATA7_VI2_B7,
+ GPIO_FN_A0, GPIO_FN_PWM3, GPIO_FN_A1, GPIO_FN_PWM4,
+
+ /* IPSR2 */
+ GPIO_FN_A2, GPIO_FN_PWM5, GPIO_FN_MSIOF1_SS1_B, GPIO_FN_A3,
+ GPIO_FN_PWM6, GPIO_FN_MSIOF1_SS2_B, GPIO_FN_A4, GPIO_FN_MSIOF1_TXD_B,
+ GPIO_FN_TPU0TO0, GPIO_FN_A5, GPIO_FN_SCIFA1_TXD_B, GPIO_FN_TPU0TO1,
+ GPIO_FN_A6, GPIO_FN_SCIFA1_RTS_N_B, GPIO_FN_TPU0TO2, GPIO_FN_A7,
+ GPIO_FN_SCIFA1_SCK_B, GPIO_FN_AUDIO_CLKOUT_B, GPIO_FN_TPU0TO3,
+ GPIO_FN_A8, GPIO_FN_SCIFA1_RXD_B, GPIO_FN_SSI_SCK5_B, GPIO_FN_VI0_R4,
+ GPIO_FN_VI0_R4_B, GPIO_FN_SCIFB2_RXD_C, GPIO_FN_VI2_DATA0_VI2_B0_B,
+ GPIO_FN_A9, GPIO_FN_SCIFA1_CTS_N_B, GPIO_FN_SSI_WS5_B, GPIO_FN_VI0_R5,
+ GPIO_FN_VI0_R5_B, GPIO_FN_SCIFB2_TXD_C, GPIO_FN_VI2_DATA1_VI2_B1_B,
+ GPIO_FN_A10, GPIO_FN_SSI_SDATA5_B, GPIO_FN_MSIOF2_SYNC, GPIO_FN_VI0_R6,
+ GPIO_FN_VI0_R6_B, GPIO_FN_VI2_DATA2_VI2_B2_B,
+
+ /* IPSR3 */
+ GPIO_FN_A11, GPIO_FN_SCIFB2_CTS_N_B, GPIO_FN_MSIOF2_SCK, GPIO_FN_VI1_R0,
+ GPIO_FN_VI1_R0_B, GPIO_FN_VI2_G0, GPIO_FN_VI2_DATA3_VI2_B3_B,
+ GPIO_FN_A12, GPIO_FN_SCIFB2_RXD_B, GPIO_FN_MSIOF2_TXD, GPIO_FN_VI1_R1,
+ GPIO_FN_VI1_R1_B, GPIO_FN_VI2_G1, GPIO_FN_VI2_DATA4_VI2_B4_B,
+ GPIO_FN_A13, GPIO_FN_SCIFB2_RTS_N_B, GPIO_FN_EX_WAIT2,
+ GPIO_FN_MSIOF2_RXD, GPIO_FN_VI1_R2, GPIO_FN_VI1_R2_B, GPIO_FN_VI2_G2,
+ GPIO_FN_VI2_DATA5_VI2_B5_B, GPIO_FN_A14, GPIO_FN_SCIFB2_TXD_B,
+ GPIO_FN_ATACS11_N, GPIO_FN_MSIOF2_SS1, GPIO_FN_A15,
+ GPIO_FN_SCIFB2_SCK_B, GPIO_FN_ATARD1_N, GPIO_FN_MSIOF2_SS2, GPIO_FN_A16,
+ GPIO_FN_ATAWR1_N, GPIO_FN_A17, GPIO_FN_AD_DO_B, GPIO_FN_ATADIR1_N,
+ GPIO_FN_A18, GPIO_FN_AD_CLK_B, GPIO_FN_ATAG1_N, GPIO_FN_A19,
+ GPIO_FN_AD_NCS_N_B, GPIO_FN_ATACS01_N, GPIO_FN_EX_WAIT0_B, GPIO_FN_A20,
+ GPIO_FN_SPCLK, GPIO_FN_VI1_R3, GPIO_FN_VI1_R3_B, GPIO_FN_VI2_G4,
+
+ /* IPSR4 */
+ GPIO_FN_A21, GPIO_FN_MOSI_IO0, GPIO_FN_VI1_R4, GPIO_FN_VI1_R4_B,
+ GPIO_FN_VI2_G5, GPIO_FN_A22, GPIO_FN_MISO_IO1, GPIO_FN_VI1_R5,
+ GPIO_FN_VI1_R5_B, GPIO_FN_VI2_G6, GPIO_FN_A23, GPIO_FN_IO2,
+ GPIO_FN_VI1_G7, GPIO_FN_VI1_G7_B, GPIO_FN_VI2_G7, GPIO_FN_A24,
+ GPIO_FN_IO3, GPIO_FN_VI1_R7, GPIO_FN_VI1_R7_B, GPIO_FN_VI2_CLKENB,
+ GPIO_FN_VI2_CLKENB_B, GPIO_FN_A25, GPIO_FN_SSL, GPIO_FN_VI1_G6,
+ GPIO_FN_VI1_G6_B, GPIO_FN_VI2_FIELD, GPIO_FN_VI2_FIELD_B, GPIO_FN_CS0_N,
+ GPIO_FN_VI1_R6, GPIO_FN_VI1_R6_B, GPIO_FN_VI2_G3, GPIO_FN_MSIOF0_SS2_B,
+ GPIO_FN_CS1_N_A26, GPIO_FN_SPEEDIN, GPIO_FN_VI0_R7, GPIO_FN_VI0_R7_B,
+ GPIO_FN_VI2_CLK, GPIO_FN_VI2_CLK_B, GPIO_FN_EX_CS0_N, GPIO_FN_HRX1_B,
+ GPIO_FN_VI1_G5, GPIO_FN_VI1_G5_B, GPIO_FN_VI2_R0, GPIO_FN_HTX0_B,
+ GPIO_FN_MSIOF0_SS1_B, GPIO_FN_EX_CS1_N, GPIO_FN_GPS_CLK,
+ GPIO_FN_HCTS1_N_B, GPIO_FN_VI1_FIELD, GPIO_FN_VI1_FIELD_B,
+ GPIO_FN_VI2_R1, GPIO_FN_EX_CS2_N, GPIO_FN_GPS_SIGN, GPIO_FN_HRTS1_N_B,
+ GPIO_FN_VI3_CLKENB, GPIO_FN_VI1_G0, GPIO_FN_VI1_G0_B, GPIO_FN_VI2_R2,
+
+ /* IPSR5 */
+ GPIO_FN_EX_CS3_N, GPIO_FN_GPS_MAG, GPIO_FN_VI3_FIELD, GPIO_FN_VI1_G1,
+ GPIO_FN_VI1_G1_B, GPIO_FN_VI2_R3, GPIO_FN_EX_CS4_N,
+ GPIO_FN_MSIOF1_SCK_B, GPIO_FN_VI3_HSYNC_N,
+ GPIO_FN_VI2_HSYNC_N, GPIO_FN_SCL1, GPIO_FN_VI2_HSYNC_N_B,
+ GPIO_FN_INTC_EN0_N, GPIO_FN_SCL1_CIS, GPIO_FN_EX_CS5_N, GPIO_FN_CAN0_RX,
+ GPIO_FN_MSIOF1_RXD_B, GPIO_FN_VI3_VSYNC_N, GPIO_FN_VI1_G2,
+ GPIO_FN_VI1_G2_B, GPIO_FN_VI2_R4, GPIO_FN_SDA1, GPIO_FN_INTC_EN1_N,
+ GPIO_FN_SDA1_CIS, GPIO_FN_BS_N, GPIO_FN_IETX, GPIO_FN_HTX1_B,
+ GPIO_FN_CAN1_TX, GPIO_FN_DRACK0, GPIO_FN_IETX_C, GPIO_FN_RD_N,
+ GPIO_FN_CAN0_TX, GPIO_FN_SCIFA0_SCK_B, GPIO_FN_RD_WR_N, GPIO_FN_VI1_G3,
+ GPIO_FN_VI1_G3_B, GPIO_FN_VI2_R5, GPIO_FN_SCIFA0_RXD_B,
+ GPIO_FN_INTC_IRQ4_N, GPIO_FN_WE0_N, GPIO_FN_IECLK, GPIO_FN_CAN_CLK,
+ GPIO_FN_VI2_VSYNC_N, GPIO_FN_SCIFA0_TXD_B, GPIO_FN_VI2_VSYNC_N_B,
+ GPIO_FN_WE1_N, GPIO_FN_IERX, GPIO_FN_CAN1_RX, GPIO_FN_VI1_G4,
+ GPIO_FN_VI1_G4_B, GPIO_FN_VI2_R6, GPIO_FN_SCIFA0_CTS_N_B,
+ GPIO_FN_IERX_C, GPIO_FN_EX_WAIT0, GPIO_FN_IRQ3, GPIO_FN_INTC_IRQ3_N,
+ GPIO_FN_VI3_CLK, GPIO_FN_SCIFA0_RTS_N_B, GPIO_FN_HRX0_B,
+ GPIO_FN_MSIOF0_SCK_B, GPIO_FN_DREQ0_N, GPIO_FN_VI1_HSYNC_N,
+ GPIO_FN_VI1_HSYNC_N_B, GPIO_FN_VI2_R7, GPIO_FN_SSI_SCK78_C,
+ GPIO_FN_SSI_WS78_B,
+
+ /* IPSR6 */
+ GPIO_FN_DACK0, GPIO_FN_IRQ0, GPIO_FN_INTC_IRQ0_N, GPIO_FN_SSI_SCK6_B,
+ GPIO_FN_VI1_VSYNC_N, GPIO_FN_VI1_VSYNC_N_B, GPIO_FN_SSI_WS78_C,
+ GPIO_FN_DREQ1_N, GPIO_FN_VI1_CLKENB, GPIO_FN_VI1_CLKENB_B,
+ GPIO_FN_SSI_SDATA7_C, GPIO_FN_SSI_SCK78_B, GPIO_FN_DACK1, GPIO_FN_IRQ1,
+ GPIO_FN_INTC_IRQ1_N, GPIO_FN_SSI_WS6_B, GPIO_FN_SSI_SDATA8_C,
+ GPIO_FN_DREQ2_N, GPIO_FN_HSCK1_B, GPIO_FN_HCTS0_N_B,
+ GPIO_FN_MSIOF0_TXD_B, GPIO_FN_DACK2, GPIO_FN_IRQ2, GPIO_FN_INTC_IRQ2_N,
+ GPIO_FN_SSI_SDATA6_B, GPIO_FN_HRTS0_N_B, GPIO_FN_MSIOF0_RXD_B,
+ GPIO_FN_ETH_CRS_DV, GPIO_FN_RMII_CRS_DV, GPIO_FN_STP_ISCLK_0_B,
+ GPIO_FN_TS_SDEN0_D, GPIO_FN_GLO_Q0_C, GPIO_FN_SCL2_E,
+ GPIO_FN_SCL2_CIS_E, GPIO_FN_ETH_RX_ER, GPIO_FN_RMII_RX_ER,
+ GPIO_FN_STP_ISD_0_B, GPIO_FN_TS_SPSYNC0_D, GPIO_FN_GLO_Q1_C,
+ GPIO_FN_SDA2_E, GPIO_FN_SDA2_CIS_E, GPIO_FN_ETH_RXD0, GPIO_FN_RMII_RXD0,
+ GPIO_FN_STP_ISEN_0_B, GPIO_FN_TS_SDAT0_D, GPIO_FN_GLO_I0_C,
+ GPIO_FN_SCIFB1_SCK_G, GPIO_FN_SCK1_E, GPIO_FN_ETH_RXD1,
+ GPIO_FN_RMII_RXD1, GPIO_FN_HRX0_E, GPIO_FN_STP_ISSYNC_0_B,
+ GPIO_FN_TS_SCK0_D, GPIO_FN_GLO_I1_C, GPIO_FN_SCIFB1_RXD_G,
+ GPIO_FN_RX1_E, GPIO_FN_ETH_LINK, GPIO_FN_RMII_LINK, GPIO_FN_HTX0_E,
+ GPIO_FN_STP_IVCXO27_0_B, GPIO_FN_SCIFB1_TXD_G, GPIO_FN_TX1_E,
+ GPIO_FN_ETH_REF_CLK, GPIO_FN_RMII_REF_CLK, GPIO_FN_HCTS0_N_E,
+ GPIO_FN_STP_IVCXO27_1_B, GPIO_FN_HRX0_F,
+
+ /* IPSR7 */
+ GPIO_FN_ETH_MDIO, GPIO_FN_RMII_MDIO, GPIO_FN_HRTS0_N_E,
+ GPIO_FN_SIM0_D_C, GPIO_FN_HCTS0_N_F, GPIO_FN_ETH_TXD1,
+ GPIO_FN_RMII_TXD1, GPIO_FN_HTX0_F, GPIO_FN_BPFCLK_G, GPIO_FN_RDS_CLK_F,
+ GPIO_FN_ETH_TX_EN, GPIO_FN_RMII_TX_EN, GPIO_FN_SIM0_CLK_C,
+ GPIO_FN_HRTS0_N_F, GPIO_FN_ETH_MAGIC, GPIO_FN_RMII_MAGIC,
+ GPIO_FN_SIM0_RST_C, GPIO_FN_ETH_TXD0, GPIO_FN_RMII_TXD0,
+ GPIO_FN_STP_ISCLK_1_B, GPIO_FN_TS_SDEN1_C, GPIO_FN_GLO_SCLK_C,
+ GPIO_FN_ETH_MDC, GPIO_FN_RMII_MDC, GPIO_FN_STP_ISD_1_B,
+ GPIO_FN_TS_SPSYNC1_C, GPIO_FN_GLO_SDATA_C, GPIO_FN_PWM0,
+ GPIO_FN_SCIFA2_SCK_C, GPIO_FN_STP_ISEN_1_B, GPIO_FN_TS_SDAT1_C,
+ GPIO_FN_GLO_SS_C, GPIO_FN_PWM1, GPIO_FN_SCIFA2_TXD_C,
+ GPIO_FN_STP_ISSYNC_1_B, GPIO_FN_TS_SCK1_C, GPIO_FN_GLO_RFON_C,
+ GPIO_FN_PCMOE_N, GPIO_FN_PWM2, GPIO_FN_PWMFSW0, GPIO_FN_SCIFA2_RXD_C,
+ GPIO_FN_PCMWE_N, GPIO_FN_IECLK_C, GPIO_FN_DU1_DOTCLKIN,
+ GPIO_FN_AUDIO_CLKC, GPIO_FN_AUDIO_CLKOUT_C, GPIO_FN_VI0_CLK,
+ GPIO_FN_ATACS00_N, GPIO_FN_AVB_RXD1, GPIO_FN_MII_RXD1,
+ GPIO_FN_VI0_DATA0_VI0_B0, GPIO_FN_ATACS10_N, GPIO_FN_AVB_RXD2,
+ GPIO_FN_MII_RXD2,
+
+ /* IPSR8 */
+ GPIO_FN_VI0_DATA1_VI0_B1, GPIO_FN_ATARD0_N, GPIO_FN_AVB_RXD3,
+ GPIO_FN_MII_RXD3, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_ATAWR0_N,
+ GPIO_FN_AVB_RXD4, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ATADIR0_N,
+ GPIO_FN_AVB_RXD5, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ATAG0_N,
+ GPIO_FN_AVB_RXD6, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_EX_WAIT1,
+ GPIO_FN_AVB_RXD7, GPIO_FN_VI0_DATA6_VI0_B6, GPIO_FN_AVB_RX_ER,
+ GPIO_FN_MII_RX_ER, GPIO_FN_VI0_DATA7_VI0_B7, GPIO_FN_AVB_RX_CLK,
+ GPIO_FN_MII_RX_CLK, GPIO_FN_VI1_CLK, GPIO_FN_AVB_RX_DV,
+ GPIO_FN_MII_RX_DV, GPIO_FN_VI1_DATA0_VI1_B0, GPIO_FN_SCIFA1_SCK_D,
+ GPIO_FN_AVB_CRS, GPIO_FN_MII_CRS, GPIO_FN_VI1_DATA1_VI1_B1,
+ GPIO_FN_SCIFA1_RXD_D, GPIO_FN_AVB_MDC, GPIO_FN_MII_MDC,
+ GPIO_FN_VI1_DATA2_VI1_B2, GPIO_FN_SCIFA1_TXD_D, GPIO_FN_AVB_MDIO,
+ GPIO_FN_MII_MDIO, GPIO_FN_VI1_DATA3_VI1_B3, GPIO_FN_SCIFA1_CTS_N_D,
+ GPIO_FN_AVB_GTX_CLK, GPIO_FN_VI1_DATA4_VI1_B4, GPIO_FN_SCIFA1_RTS_N_D,
+ GPIO_FN_AVB_MAGIC, GPIO_FN_MII_MAGIC, GPIO_FN_VI1_DATA5_VI1_B5,
+ GPIO_FN_AVB_PHY_INT, GPIO_FN_VI1_DATA6_VI1_B6, GPIO_FN_AVB_GTXREFCLK,
+ GPIO_FN_SD0_CLK, GPIO_FN_VI1_DATA0_VI1_B0_B, GPIO_FN_SD0_CMD,
+ GPIO_FN_SCIFB1_SCK_B, GPIO_FN_VI1_DATA1_VI1_B1_B,
+
+ /* IPSR9 */
+ GPIO_FN_SD0_DAT0, GPIO_FN_SCIFB1_RXD_B, GPIO_FN_VI1_DATA2_VI1_B2_B,
+ GPIO_FN_SD0_DAT1, GPIO_FN_SCIFB1_TXD_B, GPIO_FN_VI1_DATA3_VI1_B3_B,
+ GPIO_FN_SD0_DAT2, GPIO_FN_SCIFB1_CTS_N_B, GPIO_FN_VI1_DATA4_VI1_B4_B,
+ GPIO_FN_SD0_DAT3, GPIO_FN_SCIFB1_RTS_N_B, GPIO_FN_VI1_DATA5_VI1_B5_B,
+ GPIO_FN_SD0_CD, GPIO_FN_MMC0_D6, GPIO_FN_TS_SDEN0_B, GPIO_FN_USB0_EXTP,
+ GPIO_FN_GLO_SCLK, GPIO_FN_VI1_DATA6_VI1_B6_B, GPIO_FN_SCL1_B,
+ GPIO_FN_SCL1_CIS_B, GPIO_FN_VI2_DATA6_VI2_B6_B, GPIO_FN_SD0_WP,
+ GPIO_FN_MMC0_D7, GPIO_FN_TS_SPSYNC0_B, GPIO_FN_USB0_IDIN,
+ GPIO_FN_GLO_SDATA, GPIO_FN_VI1_DATA7_VI1_B7_B, GPIO_FN_SDA1_B,
+ GPIO_FN_SDA1_CIS_B, GPIO_FN_VI2_DATA7_VI2_B7_B, GPIO_FN_SD1_CLK,
+ GPIO_FN_AVB_TX_EN, GPIO_FN_MII_TX_EN, GPIO_FN_SD1_CMD,
+ GPIO_FN_AVB_TX_ER, GPIO_FN_MII_TX_ER, GPIO_FN_SCIFB0_SCK_B,
+ GPIO_FN_SD1_DAT0, GPIO_FN_AVB_TX_CLK, GPIO_FN_MII_TX_CLK,
+ GPIO_FN_SCIFB0_RXD_B, GPIO_FN_SD1_DAT1, GPIO_FN_AVB_LINK,
+ GPIO_FN_MII_LINK, GPIO_FN_SCIFB0_TXD_B, GPIO_FN_SD1_DAT2,
+ GPIO_FN_AVB_COL, GPIO_FN_MII_COL, GPIO_FN_SCIFB0_CTS_N_B,
+ GPIO_FN_SD1_DAT3, GPIO_FN_AVB_RXD0, GPIO_FN_MII_RXD0,
+ GPIO_FN_SCIFB0_RTS_N_B, GPIO_FN_SD1_CD, GPIO_FN_MMC1_D6,
+ GPIO_FN_TS_SDEN1, GPIO_FN_USB1_EXTP, GPIO_FN_GLO_SS, GPIO_FN_VI0_CLK_B,
+ GPIO_FN_SCL2_D, GPIO_FN_SCL2_CIS_D, GPIO_FN_SIM0_CLK_B,
+ GPIO_FN_VI3_CLK_B,
+
+ /* IPSR10 */
+ GPIO_FN_SD1_WP, GPIO_FN_MMC1_D7, GPIO_FN_TS_SPSYNC1, GPIO_FN_USB1_IDIN,
+ GPIO_FN_GLO_RFON, GPIO_FN_VI1_CLK_B, GPIO_FN_SDA2_D, GPIO_FN_SDA2_CIS_D,
+ GPIO_FN_SIM0_D_B, GPIO_FN_SD2_CLK, GPIO_FN_MMC0_CLK, GPIO_FN_SIM0_CLK,
+ GPIO_FN_VI0_DATA0_VI0_B0_B, GPIO_FN_TS_SDEN0_C, GPIO_FN_GLO_SCLK_B,
+ GPIO_FN_VI3_DATA0_B, GPIO_FN_SD2_CMD, GPIO_FN_MMC0_CMD, GPIO_FN_SIM0_D,
+ GPIO_FN_VI0_DATA1_VI0_B1_B, GPIO_FN_SCIFB1_SCK_E, GPIO_FN_SCK1_D,
+ GPIO_FN_TS_SPSYNC0_C, GPIO_FN_GLO_SDATA_B, GPIO_FN_VI3_DATA1_B,
+ GPIO_FN_SD2_DAT0, GPIO_FN_MMC0_D0, GPIO_FN_FMCLK_B,
+ GPIO_FN_VI0_DATA2_VI0_B2_B, GPIO_FN_SCIFB1_RXD_E, GPIO_FN_RX1_D,
+ GPIO_FN_TS_SDAT0_C, GPIO_FN_GLO_SS_B, GPIO_FN_VI3_DATA2_B,
+ GPIO_FN_SD2_DAT1, GPIO_FN_MMC0_D1, GPIO_FN_FMIN_B, GPIO_FN_RDS_DATA,
+ GPIO_FN_VI0_DATA3_VI0_B3_B, GPIO_FN_SCIFB1_TXD_E, GPIO_FN_TX1_D,
+ GPIO_FN_TS_SCK0_C, GPIO_FN_GLO_RFON_B, GPIO_FN_VI3_DATA3_B,
+ GPIO_FN_SD2_DAT2, GPIO_FN_MMC0_D2, GPIO_FN_BPFCLK_B, GPIO_FN_RDS_CLK,
+ GPIO_FN_VI0_DATA4_VI0_B4_B, GPIO_FN_HRX0_D, GPIO_FN_TS_SDEN1_B,
+ GPIO_FN_GLO_Q0_B, GPIO_FN_VI3_DATA4_B, GPIO_FN_SD2_DAT3,
+ GPIO_FN_MMC0_D3, GPIO_FN_SIM0_RST, GPIO_FN_VI0_DATA5_VI0_B5_B,
+ GPIO_FN_HTX0_D, GPIO_FN_TS_SPSYNC1_B, GPIO_FN_GLO_Q1_B,
+ GPIO_FN_VI3_DATA5_B, GPIO_FN_SD2_CD, GPIO_FN_MMC0_D4,
+ GPIO_FN_TS_SDAT0_B, GPIO_FN_USB2_EXTP, GPIO_FN_GLO_I0,
+ GPIO_FN_VI0_DATA6_VI0_B6_B, GPIO_FN_HCTS0_N_D, GPIO_FN_TS_SDAT1_B,
+ GPIO_FN_GLO_I0_B, GPIO_FN_VI3_DATA6_B,
+
+ /* IPSR11 */
+ GPIO_FN_SD2_WP, GPIO_FN_MMC0_D5, GPIO_FN_TS_SCK0_B, GPIO_FN_USB2_IDIN,
+ GPIO_FN_GLO_I1, GPIO_FN_VI0_DATA7_VI0_B7_B, GPIO_FN_HRTS0_N_D,
+ GPIO_FN_TS_SCK1_B, GPIO_FN_GLO_I1_B, GPIO_FN_VI3_DATA7_B,
+ GPIO_FN_SD3_CLK, GPIO_FN_MMC1_CLK, GPIO_FN_SD3_CMD, GPIO_FN_MMC1_CMD,
+ GPIO_FN_MTS_N, GPIO_FN_SD3_DAT0, GPIO_FN_MMC1_D0, GPIO_FN_STM_N,
+ GPIO_FN_SD3_DAT1, GPIO_FN_MMC1_D1, GPIO_FN_MDATA, GPIO_FN_SD3_DAT2,
+ GPIO_FN_MMC1_D2, GPIO_FN_SDATA, GPIO_FN_SD3_DAT3, GPIO_FN_MMC1_D3,
+ GPIO_FN_SCKZ, GPIO_FN_SD3_CD, GPIO_FN_MMC1_D4, GPIO_FN_TS_SDAT1,
+ GPIO_FN_VSP, GPIO_FN_GLO_Q0, GPIO_FN_SIM0_RST_B, GPIO_FN_SD3_WP,
+ GPIO_FN_MMC1_D5, GPIO_FN_TS_SCK1, GPIO_FN_GLO_Q1, GPIO_FN_FMIN_C,
+ GPIO_FN_RDS_DATA_B, GPIO_FN_FMIN_E, GPIO_FN_RDS_DATA_D, GPIO_FN_FMIN_F,
+ GPIO_FN_RDS_DATA_E, GPIO_FN_MLB_CLK, GPIO_FN_SCL2_B, GPIO_FN_SCL2_CIS_B,
+ GPIO_FN_MLB_SIG, GPIO_FN_SCIFB1_RXD_D, GPIO_FN_RX1_C, GPIO_FN_SDA2_B,
+ GPIO_FN_SDA2_CIS_B, GPIO_FN_MLB_DAT, GPIO_FN_SPV_EVEN,
+ GPIO_FN_SCIFB1_TXD_D, GPIO_FN_TX1_C, GPIO_FN_BPFCLK_C,
+ GPIO_FN_RDS_CLK_B, GPIO_FN_SSI_SCK0129, GPIO_FN_CAN_CLK_B,
+ GPIO_FN_MOUT0,
+
+ /* IPSR12 */
+ GPIO_FN_SSI_WS0129, GPIO_FN_CAN0_TX_B, GPIO_FN_MOUT1,
+ GPIO_FN_SSI_SDATA0, GPIO_FN_CAN0_RX_B, GPIO_FN_MOUT2,
+ GPIO_FN_SSI_SDATA1, GPIO_FN_CAN1_TX_B, GPIO_FN_MOUT5,
+ GPIO_FN_SSI_SDATA2, GPIO_FN_CAN1_RX_B, GPIO_FN_SSI_SCK1, GPIO_FN_MOUT6,
+ GPIO_FN_SSI_SCK34, GPIO_FN_STP_OPWM_0, GPIO_FN_SCIFB0_SCK,
+ GPIO_FN_MSIOF1_SCK, GPIO_FN_CAN_DEBUG_HW_TRIGGER, GPIO_FN_SSI_WS34,
+ GPIO_FN_STP_IVCXO27_0, GPIO_FN_SCIFB0_RXD, GPIO_FN_MSIOF1_SYNC,
+ GPIO_FN_CAN_STEP0, GPIO_FN_SSI_SDATA3, GPIO_FN_STP_ISCLK_0,
+ GPIO_FN_SCIFB0_TXD, GPIO_FN_MSIOF1_SS1, GPIO_FN_CAN_TXCLK,
+ GPIO_FN_SSI_SCK4, GPIO_FN_STP_ISD_0, GPIO_FN_SCIFB0_CTS_N,
+ GPIO_FN_MSIOF1_SS2, GPIO_FN_SSI_SCK5_C, GPIO_FN_CAN_DEBUGOUT0,
+ GPIO_FN_SSI_WS4, GPIO_FN_STP_ISEN_0, GPIO_FN_SCIFB0_RTS_N,
+ GPIO_FN_MSIOF1_TXD, GPIO_FN_SSI_WS5_C, GPIO_FN_CAN_DEBUGOUT1,
+ GPIO_FN_SSI_SDATA4, GPIO_FN_STP_ISSYNC_0, GPIO_FN_MSIOF1_RXD,
+ GPIO_FN_CAN_DEBUGOUT2, GPIO_FN_SSI_SCK5, GPIO_FN_SCIFB1_SCK,
+ GPIO_FN_IERX_B, GPIO_FN_DU2_EXHSYNC_DU2_HSYNC, GPIO_FN_QSTH_QHS,
+ GPIO_FN_CAN_DEBUGOUT3, GPIO_FN_SSI_WS5, GPIO_FN_SCIFB1_RXD,
+ GPIO_FN_IECLK_B, GPIO_FN_DU2_EXVSYNC_DU2_VSYNC, GPIO_FN_QSTB_QHE,
+ GPIO_FN_CAN_DEBUGOUT4,
+
+ /* IPSR13 */
+ GPIO_FN_SSI_SDATA5, GPIO_FN_SCIFB1_TXD, GPIO_FN_IETX_B, GPIO_FN_DU2_DR2,
+ GPIO_FN_LCDOUT2, GPIO_FN_CAN_DEBUGOUT5, GPIO_FN_SSI_SCK6,
+ GPIO_FN_SCIFB1_CTS_N, GPIO_FN_BPFCLK_D, GPIO_FN_RDS_CLK_C,
+ GPIO_FN_DU2_DR3, GPIO_FN_LCDOUT3, GPIO_FN_CAN_DEBUGOUT6,
+ GPIO_FN_BPFCLK_F, GPIO_FN_RDS_CLK_E, GPIO_FN_SSI_WS6,
+ GPIO_FN_SCIFB1_RTS_N, GPIO_FN_CAN0_TX_D, GPIO_FN_DU2_DR4,
+ GPIO_FN_LCDOUT4, GPIO_FN_CAN_DEBUGOUT7, GPIO_FN_SSI_SDATA6,
+ GPIO_FN_FMIN_D, GPIO_FN_RDS_DATA_C, GPIO_FN_DU2_DR5, GPIO_FN_LCDOUT5,
+ GPIO_FN_CAN_DEBUGOUT8, GPIO_FN_SSI_SCK78, GPIO_FN_STP_IVCXO27_1,
+ GPIO_FN_SCK1, GPIO_FN_SCIFA1_SCK, GPIO_FN_DU2_DR6, GPIO_FN_LCDOUT6,
+ GPIO_FN_CAN_DEBUGOUT9, GPIO_FN_SSI_WS78, GPIO_FN_STP_ISCLK_1,
+ GPIO_FN_SCIFB2_SCK, GPIO_FN_SCIFA2_CTS_N, GPIO_FN_DU2_DR7,
+ GPIO_FN_LCDOUT7, GPIO_FN_CAN_DEBUGOUT10, GPIO_FN_SSI_SDATA7,
+ GPIO_FN_STP_ISD_1, GPIO_FN_SCIFB2_RXD, GPIO_FN_SCIFA2_RTS_N,
+ GPIO_FN_TCLK2, GPIO_FN_QSTVA_QVS, GPIO_FN_CAN_DEBUGOUT11,
+ GPIO_FN_BPFCLK_E, GPIO_FN_RDS_CLK_D, GPIO_FN_SSI_SDATA7_B,
+ GPIO_FN_FMIN_G, GPIO_FN_RDS_DATA_F, GPIO_FN_SSI_SDATA8,
+ GPIO_FN_STP_ISEN_1, GPIO_FN_SCIFB2_TXD, GPIO_FN_CAN0_TX_C,
+ GPIO_FN_CAN_DEBUGOUT12, GPIO_FN_SSI_SDATA8_B, GPIO_FN_SSI_SDATA9,
+ GPIO_FN_STP_ISSYNC_1, GPIO_FN_SCIFB2_CTS_N, GPIO_FN_SSI_WS1,
+ GPIO_FN_SSI_SDATA5_C, GPIO_FN_CAN_DEBUGOUT13, GPIO_FN_AUDIO_CLKA,
+ GPIO_FN_SCIFB2_RTS_N, GPIO_FN_CAN_DEBUGOUT14,
+
+ /* IPSR14 */
+ GPIO_FN_AUDIO_CLKB, GPIO_FN_SCIF_CLK, GPIO_FN_CAN0_RX_D,
+ GPIO_FN_DVC_MUTE, GPIO_FN_CAN0_RX_C, GPIO_FN_CAN_DEBUGOUT15,
+ GPIO_FN_REMOCON, GPIO_FN_SCIFA0_SCK, GPIO_FN_HSCK1, GPIO_FN_SCK0,
+ GPIO_FN_MSIOF3_SS2, GPIO_FN_DU2_DG2, GPIO_FN_LCDOUT10, GPIO_FN_SDA1_C,
+ GPIO_FN_SDA1_CIS_C, GPIO_FN_SCIFA0_RXD, GPIO_FN_HRX1, GPIO_FN_RX0,
+ GPIO_FN_DU2_DR0, GPIO_FN_LCDOUT0, GPIO_FN_SCIFA0_TXD, GPIO_FN_HTX1,
+ GPIO_FN_TX0, GPIO_FN_DU2_DR1, GPIO_FN_LCDOUT1, GPIO_FN_SCIFA0_CTS_N,
+ GPIO_FN_HCTS1_N, GPIO_FN_CTS0_N, GPIO_FN_MSIOF3_SYNC, GPIO_FN_DU2_DG3,
+ GPIO_FN_LCDOUT11, GPIO_FN_PWM0_B, GPIO_FN_SCL1_C, GPIO_FN_SCL1_CIS_C,
+ GPIO_FN_SCIFA0_RTS_N, GPIO_FN_HRTS1_N, GPIO_FN_RTS0_N_TANS,
+ GPIO_FN_MSIOF3_SS1, GPIO_FN_DU2_DG0, GPIO_FN_LCDOUT8, GPIO_FN_PWM1_B,
+ GPIO_FN_SCIFA1_RXD, GPIO_FN_AD_DI, GPIO_FN_RX1,
+ GPIO_FN_DU2_EXODDF_DU2_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
+ GPIO_FN_SCIFA1_TXD, GPIO_FN_AD_DO, GPIO_FN_TX1, GPIO_FN_DU2_DG1,
+ GPIO_FN_LCDOUT9, GPIO_FN_SCIFA1_CTS_N, GPIO_FN_AD_CLK,
+ GPIO_FN_CTS1_N, GPIO_FN_MSIOF3_RXD, GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_QCLK,
+ GPIO_FN_SCIFA1_RTS_N, GPIO_FN_AD_NCS_N, GPIO_FN_RTS1_N_TANS,
+ GPIO_FN_MSIOF3_TXD, GPIO_FN_DU1_DOTCLKOUT, GPIO_FN_QSTVB_QVE,
+ GPIO_FN_HRTS0_N_C,
+
+ /* IPSR15 */
+ GPIO_FN_SCIFA2_SCK, GPIO_FN_FMCLK, GPIO_FN_MSIOF3_SCK, GPIO_FN_DU2_DG7,
+ GPIO_FN_LCDOUT15, GPIO_FN_SCIF_CLK_B, GPIO_FN_SCIFA2_RXD, GPIO_FN_FMIN,
+ GPIO_FN_DU2_DB0, GPIO_FN_LCDOUT16, GPIO_FN_SCL2, GPIO_FN_SCL2_CIS,
+ GPIO_FN_SCIFA2_TXD, GPIO_FN_BPFCLK, GPIO_FN_DU2_DB1, GPIO_FN_LCDOUT17,
+ GPIO_FN_SDA2, GPIO_FN_SDA2_CIS, GPIO_FN_HSCK0, GPIO_FN_TS_SDEN0,
+ GPIO_FN_DU2_DG4, GPIO_FN_LCDOUT12, GPIO_FN_HCTS0_N_C, GPIO_FN_HRX0,
+ GPIO_FN_DU2_DB2, GPIO_FN_LCDOUT18, GPIO_FN_HTX0, GPIO_FN_DU2_DB3,
+ GPIO_FN_LCDOUT19, GPIO_FN_HCTS0_N, GPIO_FN_SSI_SCK9, GPIO_FN_DU2_DB4,
+ GPIO_FN_LCDOUT20, GPIO_FN_HRTS0_N, GPIO_FN_SSI_WS9, GPIO_FN_DU2_DB5,
+ GPIO_FN_LCDOUT21, GPIO_FN_MSIOF0_SCK, GPIO_FN_TS_SDAT0, GPIO_FN_ADICLK,
+ GPIO_FN_DU2_DB6, GPIO_FN_LCDOUT22, GPIO_FN_MSIOF0_SYNC, GPIO_FN_TS_SCK0,
+ GPIO_FN_SSI_SCK2, GPIO_FN_ADIDATA, GPIO_FN_DU2_DB7, GPIO_FN_LCDOUT23,
+ GPIO_FN_SCIFA2_RXD_B, GPIO_FN_MSIOF0_SS1, GPIO_FN_ADICHS0,
+ GPIO_FN_DU2_DG5, GPIO_FN_LCDOUT13, GPIO_FN_MSIOF0_TXD, GPIO_FN_ADICHS1,
+ GPIO_FN_DU2_DG6, GPIO_FN_LCDOUT14,
+
+ /* IPSR16 */
+ GPIO_FN_MSIOF0_SS2, GPIO_FN_AUDIO_CLKOUT, GPIO_FN_ADICHS2,
+ GPIO_FN_DU2_DISP, GPIO_FN_QPOLA, GPIO_FN_HTX0_C, GPIO_FN_SCIFA2_TXD_B,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_TS_SPSYNC0, GPIO_FN_SSI_WS2,
+ GPIO_FN_ADICS_SAMP, GPIO_FN_DU2_CDE, GPIO_FN_QPOLB, GPIO_FN_HRX0_C,
+ GPIO_FN_USB1_PWEN, GPIO_FN_AUDIO_CLKOUT_D, GPIO_FN_USB1_OVC,
+ GPIO_FN_TCLK1_B,
+};
+
+#endif /* __ASM_R8A7790_H__ */
--- /dev/null
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7790.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_R8A7790_H
+#define __ASM_ARCH_R8A7790_H
+
+/*
+ * R8A7790 I/O Addresses
+ */
+#define RWDT_BASE 0xE6020000
+#define SWDT_BASE 0xE6030000
+#define LBSC_BASE 0xFEC00200
+#define DBSC3_0_BASE 0xE6790000
+#define DBSC3_1_BASE 0xE67A0000
+#define TMU_BASE 0xE61E0000
+#define GPIO5_BASE 0xE6055000
+
+#define S3C_BASE 0xE6784000
+#define S3C_INT_BASE 0xE6784A00
+#define S3C_MEDIA_BASE 0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE 0xE6784BDC
+#define S3C_QOS_CCI0_BASE 0xE6784C00
+#define S3C_QOS_CCI1_BASE 0xE6784C24
+#define S3C_QOS_MXI_BASE 0xE6784C48
+#define S3C_QOS_AXI_BASE 0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE 0xE6791000
+#define DBSC3_0_QOS_R1_BASE 0xE6791100
+#define DBSC3_0_QOS_R2_BASE 0xE6791200
+#define DBSC3_0_QOS_R3_BASE 0xE6791300
+#define DBSC3_0_QOS_R4_BASE 0xE6791400
+#define DBSC3_0_QOS_R5_BASE 0xE6791500
+#define DBSC3_0_QOS_R6_BASE 0xE6791600
+#define DBSC3_0_QOS_R7_BASE 0xE6791700
+#define DBSC3_0_QOS_R8_BASE 0xE6791800
+#define DBSC3_0_QOS_R9_BASE 0xE6791900
+#define DBSC3_0_QOS_R10_BASE 0xE6791A00
+#define DBSC3_0_QOS_R11_BASE 0xE6791B00
+#define DBSC3_0_QOS_R12_BASE 0xE6791C00
+#define DBSC3_0_QOS_R13_BASE 0xE6791D00
+#define DBSC3_0_QOS_R14_BASE 0xE6791E00
+#define DBSC3_0_QOS_R15_BASE 0xE6791F00
+#define DBSC3_0_QOS_W0_BASE 0xE6792000
+#define DBSC3_0_QOS_W1_BASE 0xE6792100
+#define DBSC3_0_QOS_W2_BASE 0xE6792200
+#define DBSC3_0_QOS_W3_BASE 0xE6792300
+#define DBSC3_0_QOS_W4_BASE 0xE6792400
+#define DBSC3_0_QOS_W5_BASE 0xE6792500
+#define DBSC3_0_QOS_W6_BASE 0xE6792600
+#define DBSC3_0_QOS_W7_BASE 0xE6792700
+#define DBSC3_0_QOS_W8_BASE 0xE6792800
+#define DBSC3_0_QOS_W9_BASE 0xE6792900
+#define DBSC3_0_QOS_W10_BASE 0xE6792A00
+#define DBSC3_0_QOS_W11_BASE 0xE6792B00
+#define DBSC3_0_QOS_W12_BASE 0xE6792C00
+#define DBSC3_0_QOS_W13_BASE 0xE6792D00
+#define DBSC3_0_QOS_W14_BASE 0xE6792E00
+#define DBSC3_0_QOS_W15_BASE 0xE6792F00
+
+#define DBSC3_0_DBADJ2 0xE67900C8
+
+#define CCI_400_MAXOT_1 0xF0091110
+#define CCI_400_MAXOT_2 0xF0092110
+#define CCI_400_QOSCNTL_1 0xF009110C
+#define CCI_400_QOSCNTL_2 0xF009210C
+
+#define MXI_BASE 0xFE960000
+#define MXI_QOS_BASE 0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE 0xFF800300
+#define SYS_AXI_AVB_BASE 0xFF800340
+#define SYS_AXI_G2D_BASE 0xFF800540
+#define SYS_AXI_IMP0_BASE 0xFF800580
+#define SYS_AXI_IMP1_BASE 0xFF8005C0
+#define SYS_AXI_IMUX0_BASE 0xFF800600
+#define SYS_AXI_IMUX1_BASE 0xFF800640
+#define SYS_AXI_IMUX2_BASE 0xFF800680
+#define SYS_AXI_LBS_BASE 0xFF8006C0
+#define SYS_AXI_MMUDS_BASE 0xFF800700
+#define SYS_AXI_MMUM_BASE 0xFF800740
+#define SYS_AXI_MMUR_BASE 0xFF800780
+#define SYS_AXI_MMUS0_BASE 0xFF8007C0
+#define SYS_AXI_MMUS1_BASE 0xFF800800
+#define SYS_AXI_MTSB0_BASE 0xFF800880
+#define SYS_AXI_MTSB1_BASE 0xFF8008C0
+#define SYS_AXI_PCI_BASE 0xFF800900
+#define SYS_AXI_RTX_BASE 0xFF800940
+#define SYS_AXI_SDS0_BASE 0xFF800A80
+#define SYS_AXI_SDS1_BASE 0xFF800AC0
+#define SYS_AXI_USB20_BASE 0xFF800C00
+#define SYS_AXI_USB21_BASE 0xFF800C40
+#define SYS_AXI_USB22_BASE 0xFF800C80
+#define SYS_AXI_USB30_BASE 0xFF800CC0
+
+#define RT_AXI_SHX_BASE 0xFF810100
+#define RT_AXI_RDS_BASE 0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE 0xFF810200
+#define RT_AXI_STPRO_BASE 0xFF810240
+
+#define MP_AXI_ADSP_BASE 0xFF820100
+#define MP_AXI_ASDS0_BASE 0xFF8201C0
+#define MP_AXI_ASDS1_BASE 0xFF820200
+#define MP_AXI_MLP_BASE 0xFF820240
+#define MP_AXI_MMUMP_BASE 0xFF820280
+#define MP_AXI_SPU_BASE 0xFF8202C0
+#define MP_AXI_SPUC_BASE 0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE 0xFF860100
+#define SYS_AXI256_SYX_BASE 0xFF860140
+#define SYS_AXI256_MPX_BASE 0xFF860180
+#define SYS_AXI256_MXI_BASE 0xFF8601C0
+
+#define CCI_AXI_MMUS0_BASE 0xFF880100
+#define CCI_AXI_SYX2_BASE 0xFF880140
+#define CCI_AXI_MMUR_BASE 0xFF880180
+#define CCI_AXI_MMUDS_BASE 0xFF8801C0
+#define CCI_AXI_MMUM_BASE 0xFF880200
+#define CCI_AXI_MXI_BASE 0xFF880240
+#define CCI_AXI_MMUS1_BASE 0xFF880280
+#define CCI_AXI_MMUMP_BASE 0xFF8802C0
+
+#define MEDIA_AXI_JPR_BASE 0xFE964100
+#define MEDIA_AXI_JPW_BASE 0xFE966100
+#define MEDIA_AXI_GCU0R_BASE 0xFE964140
+#define MEDIA_AXI_GCU0W_BASE 0xFE966140
+#define MEDIA_AXI_GCU1R_BASE 0xFE964180
+#define MEDIA_AXI_GCU1W_BASE 0xFE966180
+#define MEDIA_AXI_TDMR_BASE 0xFE964500
+#define MEDIA_AXI_TDMW_BASE 0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE 0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE 0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE 0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE 0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE 0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE 0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE 0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE 0xFE966600
+#define MEDIA_AXI_VIN0W_BASE 0xFE966900
+#define MEDIA_AXI_VSP0R_BASE 0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE 0xFE966D00
+#define MEDIA_AXI_FDP0R_BASE 0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE 0xFE966D40
+#define MEDIA_AXI_IMSR_BASE 0xFE964D80
+#define MEDIA_AXI_IMSW_BASE 0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE 0xFE965100
+#define MEDIA_AXI_VSP1W_BASE 0xFE967100
+#define MEDIA_AXI_FDP1R_BASE 0xFE965140
+#define MEDIA_AXI_FDP1W_BASE 0xFE967140
+#define MEDIA_AXI_IMRR_BASE 0xFE965180
+#define MEDIA_AXI_IMRW_BASE 0xFE967180
+#define MEDIA_AXI_FDP2R_BASE 0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE 0xFE966DC0
+#define MEDIA_AXI_VSPD0R_BASE 0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE 0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE 0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE 0xFE967540
+#define MEDIA_AXI_DU0R_BASE 0xFE965580
+#define MEDIA_AXI_DU0W_BASE 0xFE967580
+#define MEDIA_AXI_DU1R_BASE 0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE 0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE 0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE 0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE 0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE 0xFE967940
+#define MEDIA_AXI_VPC0R_BASE 0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE 0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE 0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE 0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE 0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE 0xFE965D80
+
+#define SYS_AXI_AVBDMSCR 0xFF802000
+#define SYS_AXI_SYX2DMSCR 0xFF802004
+#define SYS_AXI_CC50DMSCR 0xFF802008
+#define SYS_AXI_CC51DMSCR 0xFF80200C
+#define SYS_AXI_CCIDMSCR 0xFF802010
+#define SYS_AXI_CSDMSCR 0xFF802014
+#define SYS_AXI_DDMDMSCR 0xFF802018
+#define SYS_AXI_ETHDMSCR 0xFF80201C
+#define SYS_AXI_G2DDMSCR 0xFF802020
+#define SYS_AXI_IMP0DMSCR 0xFF802024
+#define SYS_AXI_IMP1DMSCR 0xFF802028
+#define SYS_AXI_LBSDMSCR 0xFF80202C
+#define SYS_AXI_MMUDSDMSCR 0xFF802030
+#define SYS_AXI_MMUMXDMSCR 0xFF802034
+#define SYS_AXI_MMURDDMSCR 0xFF802038
+#define SYS_AXI_MMUS0DMSCR 0xFF80203C
+#define SYS_AXI_MMUS1DMSCR 0xFF802040
+#define SYS_AXI_MPXDMSCR 0xFF802044
+#define SYS_AXI_MTSB0DMSCR 0xFF802048
+#define SYS_AXI_MTSB1DMSCR 0xFF80204C
+#define SYS_AXI_PCIDMSCR 0xFF802050
+#define SYS_AXI_RTXDMSCR 0xFF802054
+#define SYS_AXI_SAT0DMSCR 0xFF802058
+#define SYS_AXI_SAT1DMSCR 0xFF80205C
+#define SYS_AXI_SDM0DMSCR 0xFF802060
+#define SYS_AXI_SDM1DMSCR 0xFF802064
+#define SYS_AXI_SDS0DMSCR 0xFF802068
+#define SYS_AXI_SDS1DMSCR 0xFF80206C
+#define SYS_AXI_ETRABDMSCR 0xFF802070
+#define SYS_AXI_ETRKFDMSCR 0xFF802074
+#define SYS_AXI_UDM0DMSCR 0xFF802078
+#define SYS_AXI_UDM1DMSCR 0xFF80207C
+#define SYS_AXI_USB20DMSCR 0xFF802080
+#define SYS_AXI_USB21DMSCR 0xFF802084
+#define SYS_AXI_USB22DMSCR 0xFF802088
+#define SYS_AXI_USB30DMSCR 0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR 0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR 0xFF802104
+#define SYS_AXI_AVBSLVDMSCR 0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR 0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR 0xFF802110
+#define SYS_AXI_GICSLVDMSCR 0xFF802114
+#define SYS_AXI_IMPSLVDMSCR 0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR 0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR 0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR 0xFF802124
+#define SYS_AXI_LBSSLVDMSCR 0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR 0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR 0xFF802130
+#define SYS_AXI_MPXSLVDMSCR 0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR 0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR 0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR 0xFF802140
+#define SYS_AXI_PCISLVDMSCR 0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR 0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR 0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR 0xFF802150
+#define SYS_AXI_SAT0SLVDMSCR 0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR 0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR 0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR 0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR 0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR 0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR 0xFF802180
+#define SYS_AXI_STBSLVDMSCR 0xFF802188
+#define SYS_AXI_STMSLVDMSCR 0xFF80218C
+#define SYS_AXI_TSPL0SLVDMSCR 0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR 0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR 0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR 0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR 0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR 0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR 0xFF8021AC
+
+#define RT_AXI_CBMDMSCR 0xFF812000
+#define RT_AXI_DBDMSCR 0xFF812004
+#define RT_AXI_RDMDMSCR 0xFF812008
+#define RT_AXI_RDSDMSCR 0xFF81200C
+#define RT_AXI_STRDMSCR 0xFF812010
+#define RT_AXI_SY2RTDMSCR 0xFF812014
+#define RT_AXI_CBSSLVDMSCR 0xFF812100
+#define RT_AXI_DBSSLVDMSCR 0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR 0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR 0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR 0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR 0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR 0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR 0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR 0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR 0xFF812128
+
+#define MP_AXI_ADSPDMSCR 0xFF822000
+#define MP_AXI_ASDM0DMSCR 0xFF822004
+#define MP_AXI_ASDM1DMSCR 0xFF822008
+#define MP_AXI_ASDS0DMSCR 0xFF82200C
+#define MP_AXI_ASDS1DMSCR 0xFF822010
+#define MP_AXI_MLPDMSCR 0xFF822014
+#define MP_AXI_MMUMPDMSCR 0xFF822018
+#define MP_AXI_SPUDMSCR 0xFF82201C
+#define MP_AXI_SPUCDMSCR 0xFF822020
+#define MP_AXI_SY2MPDMSCR 0xFF822024
+#define MP_AXI_ADSPSLVDMSCR 0xFF822100
+#define MP_AXI_MLMSLVDMSCR 0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR 0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR 0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR 0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR 0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR 0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR 0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR 0xFF822124
+#define MP_AXI_SPUSLVDMSCR 0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR 0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR 0xFF842000
+#define ADM_AXI_ASDM1DMSCR 0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR 0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR 0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR 0xFF84210C
+
+#define DM_AXI_RDMDMSCR 0xFF852000
+#define DM_AXI_SDM0DMSCR 0xFF852004
+#define DM_AXI_SDM1DMSCR 0xFF852008
+#define DM_AXI_MMAP0SLVDMSCR 0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR 0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR 0xFF852108
+#define DM_AXI_RAP4SLVDMSCR 0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR 0xFF852110
+#define DM_AXI_SAP4SLVDMSCR 0xFF852114
+#define DM_AXI_SAP5SLVDMSCR 0xFF852118
+#define DM_AXI_SAP6SLVDMSCR 0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR 0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR 0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR 0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR 0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR 0xFF852130
+
+#define SYS_AXI256_SYXDMSCR 0xFF862000
+#define SYS_AXI256_MPXDMSCR 0xFF862004
+#define SYS_AXI256_MXIDMSCR 0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR 0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR 0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR 0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR 0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR 0xFF862110
+
+#define MXT_SYXDMSCR 0xFF872000
+#define MXT_CMM0SLVDMSCR 0xFF872100
+#define MXT_CMM1SLVDMSCR 0xFF872104
+#define MXT_CMM2SLVDMSCR 0xFF872108
+#define MXT_FDPSLVDMSCR 0xFF87210C
+#define MXT_IMRSLVDMSCR 0xFF872110
+#define MXT_VINSLVDMSCR 0xFF872114
+#define MXT_VPC0SLVDMSCR 0xFF872118
+#define MXT_VPC1SLVDMSCR 0xFF87211C
+#define MXT_VSP0SLVDMSCR 0xFF872120
+#define MXT_VSP1SLVDMSCR 0xFF872124
+#define MXT_VSPD0SLVDMSCR 0xFF872128
+#define MXT_VSPD1SLVDMSCR 0xFF87212C
+#define MXT_MAP1SLVDMSCR 0xFF872130
+#define MXT_MAP2SLVDMSCR 0xFF872134
+
+#define CCI_AXI_MMUS0DMSCR 0xFF882000
+#define CCI_AXI_SYX2DMSCR 0xFF882004
+#define CCI_AXI_MMURDMSCR 0xFF882008
+#define CCI_AXI_MMUDSDMSCR 0xFF88200C
+#define CCI_AXI_MMUMDMSCR 0xFF882010
+#define CCI_AXI_MXIDMSCR 0xFF882014
+#define CCI_AXI_MMUS1DMSCR 0xFF882018
+#define CCI_AXI_MMUMPDMSCR 0xFF88201C
+#define CCI_AXI_DVMDMSCR 0xFF882020
+#define CCI_AXI_CCISLVDMSCR 0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR 0xFF880400
+#define CCI_AXI_IPMMURDVMCR 0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR 0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR 0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR 0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR 0xFF880414
+#define CCI_AXI_AX2ADDRMASK 0xFF88041C
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7790_rwdt {
+ u32 rwtcnt; /* 0x00 */
+ u32 rwtcsra; /* 0x04 */
+ u16 rwtcsrb; /* 0x08 */
+};
+
+/* SWDT */
+struct r8a7790_swdt {
+ u32 swtcnt; /* 0x00 */
+ u32 swtcsra; /* 0x04 */
+ u16 swtcsrb; /* 0x08 */
+};
+
+/* LBSC */
+struct r8a7790_lbsc {
+ u32 cs0ctrl;
+ u32 cs1ctrl;
+ u32 ecs0ctrl;
+ u32 ecs1ctrl;
+ u32 ecs2ctrl;
+ u32 ecs3ctrl;
+ u32 ecs4ctrl;
+ u32 ecs5ctrl;
+ u32 dummy0[4]; /* 0x20 .. 0x2C */
+ u32 cswcr0;
+ u32 cswcr1;
+ u32 ecswcr0;
+ u32 ecswcr1;
+ u32 ecswcr2;
+ u32 ecswcr3;
+ u32 ecswcr4;
+ u32 ecswcr5;
+ u32 exdmawcr0;
+ u32 exdmawcr1;
+ u32 exdmawcr2;
+ u32 dummy1[9]; /* 0x5C .. 0x7C */
+ u32 cspwcr0;
+ u32 cspwcr1;
+ u32 ecspwcr0;
+ u32 ecspwcr1;
+ u32 ecspwcr2;
+ u32 ecspwcr3;
+ u32 ecspwcr4;
+ u32 ecspwcr5;
+ u32 exwtsync;
+ u32 dummy2[3]; /* 0xA4 .. 0xAC */
+ u32 cs0bstctl;
+ u32 cs0btph;
+ u32 dummy3[2]; /* 0xB8 .. 0xBC */
+ u32 cs1gdst;
+ u32 ecs0gdst;
+ u32 ecs1gdst;
+ u32 ecs2gdst;
+ u32 ecs3gdst;
+ u32 ecs4gdst;
+ u32 ecs5gdst;
+ u32 dummy4[5]; /* 0xDC .. 0xEC */
+ u32 exdmaset0;
+ u32 exdmaset1;
+ u32 exdmaset2;
+ u32 dummy5[5]; /* 0xFC .. 0x10C */
+ u32 exdmcr0;
+ u32 exdmcr1;
+ u32 exdmcr2;
+ u32 dummy6[5]; /* 0x11C .. 0x12C */
+ u32 bcintsr;
+ u32 bcintcr;
+ u32 bcintmr;
+ u32 dummy7; /* 0x13C */
+ u32 exbatlv;
+ u32 exwtsts;
+ u32 dummy8[14]; /* 0x148 .. 0x17C */
+ u32 atacsctrl;
+ u32 dummy9[15]; /* 0x184 .. 0x1BC */
+ u32 exbct;
+ u32 extct;
+};
+
+/* DBSC3 */
+struct r8a7790_dbsc3 {
+ u32 dummy0[3]; /* 0x00 .. 0x08 */
+ u32 dbstate1;
+ u32 dbacen;
+ u32 dbrfen;
+ u32 dbcmd;
+ u32 dbwait;
+ u32 dbkind;
+ u32 dbconf0;
+ u32 dummy1[2]; /* 0x28 .. 0x2C */
+ u32 dbphytype;
+ u32 dummy2[3]; /* 0x34 .. 0x3C */
+ u32 dbtr0;
+ u32 dbtr1;
+ u32 dbtr2;
+ u32 dummy3; /* 0x4C */
+ u32 dbtr3;
+ u32 dbtr4;
+ u32 dbtr5;
+ u32 dbtr6;
+ u32 dbtr7;
+ u32 dbtr8;
+ u32 dbtr9;
+ u32 dbtr10;
+ u32 dbtr11;
+ u32 dbtr12;
+ u32 dbtr13;
+ u32 dbtr14;
+ u32 dbtr15;
+ u32 dbtr16;
+ u32 dbtr17;
+ u32 dbtr18;
+ u32 dbtr19;
+ u32 dummy4[7]; /* 0x94 .. 0xAC */
+ u32 dbbl;
+ u32 dummy5[3]; /* 0xB4 .. 0xBC */
+ u32 dbadj0;
+ u32 dummy6; /* 0xC4 */
+ u32 dbadj2;
+ u32 dummy7[5]; /* 0xCC .. 0xDC */
+ u32 dbrfcnf0;
+ u32 dbrfcnf1;
+ u32 dbrfcnf2;
+ u32 dummy8[2]; /* 0xEC .. 0xF0 */
+ u32 dbcalcnf;
+ u32 dbcaltr;
+ u32 dummy9; /* 0xFC */
+ u32 dbrnk0;
+ u32 dummy10[31]; /* 0x104 .. 0x17C */
+ u32 dbpdncnf;
+ u32 dummy11[47]; /* 0x184 ..0x23C */
+ u32 dbdfistat;
+ u32 dbdficnt;
+ u32 dummy12[14]; /* 0x248 .. 0x27C */
+ u32 dbpdlck;
+ u32 dummy13[3]; /* 0x284 .. 0x28C */
+ u32 dbpdrga;
+ u32 dummy14[3]; /* 0x294 .. 0x29C */
+ u32 dbpdrgd;
+ u32 dummy15[24]; /* 0x2A4 .. 0x300 */
+ u32 dbbs0cnt1;
+ u32 dummy16[30]; /* 0x308 .. 0x37C */
+ u32 dbwt0cnf0;
+ u32 dbwt0cnf1;
+ u32 dbwt0cnf2;
+ u32 dbwt0cnf3;
+ u32 dbwt0cnf4;
+};
+
+/* GPIO */
+struct r8a7790_gpio {
+ u32 iointsel;
+ u32 inoutsel;
+ u32 outdt;
+ u32 indt;
+ u32 intdt;
+ u32 intclr;
+ u32 intmsk;
+ u32 posneg;
+ u32 edglevel;
+ u32 filonoff;
+ u32 intmsks;
+ u32 mskclrs;
+ u32 outdtsel;
+ u32 outdth;
+ u32 outdtl;
+ u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct r8a7790_s3c {
+ u32 s3cexcladdmsk;
+ u32 s3cexclidmsk;
+ u32 s3cadsplcr;
+ u32 s3cmaar;
+ u32 s3carcr11;
+ u32 s3crorr;
+ u32 s3cworr;
+ u32 s3carcr22;
+ u32 dummy1[2]; /* 0x20 .. 0x24 */
+ u32 s3cmctr;
+ u32 dummy2; /* 0x2C */
+ u32 cconf0;
+ u32 cconf1;
+ u32 cconf2;
+ u32 cconf3;
+};
+
+struct r8a7790_s3c_qos {
+ u32 s3cqos0;
+ u32 s3cqos1;
+ u32 s3cqos2;
+ u32 s3cqos3;
+ u32 s3cqos4;
+ u32 s3cqos5;
+ u32 s3cqos6;
+ u32 s3cqos7;
+ u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct r8a7790_dbsc3_qos {
+ u32 dblgcnt;
+ u32 dbtmval0;
+ u32 dbtmval1;
+ u32 dbtmval2;
+ u32 dbtmval3;
+ u32 dbrqctr;
+ u32 dbthres0;
+ u32 dbthres1;
+ u32 dbthres2;
+ u32 dummy0; /* 0x24 */
+ u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct r8a7790_mxi {
+ u32 mxsaar0;
+ u32 mxsaar1;
+ u32 dummy0[7]; /* 0x08 .. 0x20 */
+ u32 mxaxiracr;
+ u32 mxs3cracr;
+ u32 dummy1[2]; /* 0x2C .. 0x30 */
+ u32 mxaxiwacr;
+ u32 mxs3cwacr;
+ u32 dummy2; /* 0x3C */
+ u32 mxrtcr;
+ u32 mxwtcr;
+};
+
+struct r8a7790_mxi_qos {
+ u32 vspdu0;
+ u32 vspdu1;
+ u32 du0;
+ u32 du1;
+};
+
+/* AXI(QoS) */
+struct r8a7790_axi_qos {
+ u32 qosconf;
+ u32 qosctset0;
+ u32 qosctset1;
+ u32 qosctset2;
+ u32 qosctset3;
+ u32 qosreqctr;
+ u32 qosthres0;
+ u32 qosthres1;
+ u32 qosthres2;
+ u32 qosqon;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7790_H */
--- /dev/null
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+ GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+ GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+ GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+ GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+ GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+ GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+ GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+ GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+ GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+ GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+ GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+ GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+ GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+ GPIO_GP_1_24, GPIO_GP_1_25,
+
+ GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+ GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+ GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+ GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+ GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+ GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+ GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+ GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
+
+ GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+ GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+ GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+ GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+ GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+ GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+ GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+ GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+ GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+ GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+ GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+ GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+ GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+ GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+ GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+ GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+ GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+ GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+ GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+ GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
+ GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
+ GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
+ GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
+ GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
+
+ GPIO_GP_6_0, GPIO_GP_6_1, GPIO_GP_6_2, GPIO_GP_6_3,
+ GPIO_GP_6_4, GPIO_GP_6_5, GPIO_GP_6_6, GPIO_GP_6_7,
+ GPIO_GP_6_8, GPIO_GP_6_9, GPIO_GP_6_10, GPIO_GP_6_11,
+ GPIO_GP_6_12, GPIO_GP_6_13, GPIO_GP_6_14, GPIO_GP_6_15,
+ GPIO_GP_6_16, GPIO_GP_6_17, GPIO_GP_6_18, GPIO_GP_6_19,
+ GPIO_GP_6_20, GPIO_GP_6_21, GPIO_GP_6_22, GPIO_GP_6_23,
+ GPIO_GP_6_24, GPIO_GP_6_25, GPIO_GP_6_26, GPIO_GP_6_27,
+ GPIO_GP_6_28, GPIO_GP_6_29, GPIO_GP_6_30, GPIO_GP_6_31,
+
+ GPIO_GP_7_0, GPIO_GP_7_1, GPIO_GP_7_2, GPIO_GP_7_3,
+ GPIO_GP_7_4, GPIO_GP_7_5, GPIO_GP_7_6, GPIO_GP_7_7,
+ GPIO_GP_7_8, GPIO_GP_7_9, GPIO_GP_7_10, GPIO_GP_7_11,
+ GPIO_GP_7_12, GPIO_GP_7_13, GPIO_GP_7_14, GPIO_GP_7_15,
+ GPIO_GP_7_16, GPIO_GP_7_17, GPIO_GP_7_18, GPIO_GP_7_19,
+ GPIO_GP_7_20, GPIO_GP_7_21, GPIO_GP_7_22, GPIO_GP_7_23,
+ GPIO_GP_7_24, GPIO_GP_7_25,
+
+ GPIO_FN_EX_CS0_N, GPIO_FN_RD_N, GPIO_FN_AUDIO_CLKA,
+ GPIO_FN_VI0_CLK, GPIO_FN_VI0_DATA0_VI0_B0,
+ GPIO_FN_VI0_DATA0_VI0_B1, GPIO_FN_VI0_DATA0_VI0_B2,
+ GPIO_FN_VI0_DATA0_VI0_B4, GPIO_FN_VI0_DATA0_VI0_B5,
+ GPIO_FN_VI0_DATA0_VI0_B6, GPIO_FN_VI0_DATA0_VI0_B7,
+ GPIO_FN_USB0_PWEN, GPIO_FN_USB0_OVC, GPIO_FN_USB1_PWEN,
+
+ /* IPSR0 */
+ GPIO_FN_D0, GPIO_FN_D1, GPIO_FN_D2, GPIO_FN_D3, GPIO_FN_D4, GPIO_FN_D5,
+ GPIO_FN_D6, GPIO_FN_D7, GPIO_FN_D8, GPIO_FN_D9, GPIO_FN_D10,
+ GPIO_FN_D11, GPIO_FN_D12, GPIO_FN_D13, GPIO_FN_D14, GPIO_FN_D15,
+ GPIO_FN_A0, GPIO_FN_ATAWR0_N_C, GPIO_FN_MSIOF0_SCK_B,
+ GPIO_FN_SCL0_C, GPIO_FN_PWM2_B,
+ GPIO_FN_A1, GPIO_FN_MSIOF0_SYNC_B, GPIO_FN_A2, GPIO_FN_MSIOF0_SS1_B,
+ GPIO_FN_A3, GPIO_FN_MSIOF0_SS2_B, GPIO_FN_A4, GPIO_FN_MSIOF0_TXD_B,
+ GPIO_FN_A5, GPIO_FN_MSIOF0_RXD_B, GPIO_FN_A6, GPIO_FN_MSIOF1_SCK,
+
+ /* IPSR1 */
+ GPIO_FN_A7, GPIO_FN_MSIOF1_SYNC, GPIO_FN_A8,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_SCL0,
+ GPIO_FN_A9, GPIO_FN_MSIOF1_SS2, GPIO_FN_SDA0,
+ GPIO_FN_A10, GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_TXD_D,
+ GPIO_FN_A11, GPIO_FN_MSIOF1_RXD, GPIO_FN_SCL3_D, GPIO_FN_MSIOF1_RXD_D,
+ GPIO_FN_A12, GPIO_FN_FMCLK, GPIO_FN_SDA3_D, GPIO_FN_MSIOF1_SCK_D,
+ GPIO_FN_A13, GPIO_FN_ATAG0_N_C, GPIO_FN_BPFCLK, GPIO_FN_MSIOF1_SS1_D,
+ GPIO_FN_A14, GPIO_FN_ATADIR0_N_C, GPIO_FN_FMIN,
+ GPIO_FN_FMIN_C, GPIO_FN_MSIOF1_SYNC_D,
+ GPIO_FN_A15, GPIO_FN_BPFCLK_C,
+ GPIO_FN_A16, GPIO_FN_DREQ2_B, GPIO_FN_FMCLK_C, GPIO_FN_SCIFA1_SCK_B,
+ GPIO_FN_A17, GPIO_FN_DACK2_B, GPIO_FN_SDA0_C,
+ GPIO_FN_A18, GPIO_FN_DREQ1, GPIO_FN_SCIFA1_RXD_C, GPIO_FN_SCIFB1_RXD_C,
+
+ /* IPSR2 */
+ GPIO_FN_A19, GPIO_FN_DACK1, GPIO_FN_SCIFA1_TXD_C,
+ GPIO_FN_SCIFB1_TXD_C, GPIO_FN_SCIFB1_SCK_B,
+ GPIO_FN_A20, GPIO_FN_SPCLK,
+ GPIO_FN_A21, GPIO_FN_ATAWR0_N_B, GPIO_FN_MOSI_IO0,
+ GPIO_FN_A22, GPIO_FN_MISO_IO1, GPIO_FN_FMCLK_B,
+ GPIO_FN_TX0, GPIO_FN_SCIFA0_TXD,
+ GPIO_FN_A23, GPIO_FN_IO2, GPIO_FN_BPFCLK_B,
+ GPIO_FN_RX0, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_A24, GPIO_FN_DREQ2, GPIO_FN_IO3,
+ GPIO_FN_TX1, GPIO_FN_SCIFA1_TXD,
+ GPIO_FN_A25, GPIO_FN_DACK2, GPIO_FN_SSL, GPIO_FN_DREQ1_C,
+ GPIO_FN_RX1, GPIO_FN_SCIFA1_RXD,
+ GPIO_FN_CS0_N, GPIO_FN_ATAG0_N_B, GPIO_FN_SCL1,
+ GPIO_FN_CS1_N_A26, GPIO_FN_ATADIR0_N_B, GPIO_FN_SDA1,
+ GPIO_FN_EX_CS1_N, GPIO_FN_MSIOF2_SCK,
+ GPIO_FN_EX_CS2_N, GPIO_FN_ATAWR0_N, GPIO_FN_MSIOF2_SYNC,
+ GPIO_FN_EX_CS3_N, GPIO_FN_ATADIR0_N, GPIO_FN_MSIOF2_TXD,
+ GPIO_FN_ATAG0_N, GPIO_FN_EX_WAIT1,
+
+ /* IPSR3 */
+ GPIO_FN_EX_CS4_N, GPIO_FN_ATARD0_N,
+ GPIO_FN_MSIOF2_RXD, GPIO_FN_EX_WAIT2,
+ GPIO_FN_EX_CS5_N, GPIO_FN_ATACS00_N, GPIO_FN_MSIOF2_SS1,
+ GPIO_FN_HRX1_B, GPIO_FN_SCIFB1_RXD_B,
+ GPIO_FN_PWM1, GPIO_FN_TPU_TO1,
+ GPIO_FN_BS_N, GPIO_FN_ATACS10_N, GPIO_FN_MSIOF2_SS2,
+ GPIO_FN_HTX1_B, GPIO_FN_SCIFB1_TXD_B,
+ GPIO_FN_PWM2, GPIO_FN_TPU_TO2,
+ GPIO_FN_RD_WR_N, GPIO_FN_HRX2_B, GPIO_FN_FMIN_B,
+ GPIO_FN_SCIFB0_RXD_B, GPIO_FN_DREQ1_D,
+ GPIO_FN_WE0_N, GPIO_FN_HCTS2_N_B, GPIO_FN_SCIFB0_TXD_B,
+ GPIO_FN_WE1_N, GPIO_FN_ATARD0_N_B,
+ GPIO_FN_HTX2_B, GPIO_FN_SCIFB0_RTS_N_B,
+ GPIO_FN_EX_WAIT0, GPIO_FN_HRTS2_N_B, GPIO_FN_SCIFB0_CTS_N_B,
+ GPIO_FN_DREQ0, GPIO_FN_PWM3, GPIO_FN_TPU_TO3,
+ GPIO_FN_DACK0, GPIO_FN_DRACK0, GPIO_FN_REMOCON,
+ GPIO_FN_SPEEDIN, GPIO_FN_HSCK0_C, GPIO_FN_HSCK2_C,
+ GPIO_FN_SCIFB0_SCK_B, GPIO_FN_SCIFB2_SCK_B,
+ GPIO_FN_DREQ2_C, GPIO_FN_HTX2_D,
+ GPIO_FN_SSI_SCK0129, GPIO_FN_HRX0_C, GPIO_FN_HRX2_C,
+ GPIO_FN_SCIFB0_RXD_C, GPIO_FN_SCIFB2_RXD_C,
+ GPIO_FN_SSI_WS0129, GPIO_FN_HTX0_C, GPIO_FN_HTX2_C,
+ GPIO_FN_SCIFB0_TXD_C, GPIO_FN_SCIFB2_TXD_C,
+
+ /* IPSR4 */
+ GPIO_FN_SSI_SDATA0, GPIO_FN_SCL0_B,
+ GPIO_FN_SCL7_B, GPIO_FN_MSIOF2_SCK_C,
+ GPIO_FN_SSI_SCK1, GPIO_FN_SDA0_B, GPIO_FN_SDA7_B,
+ GPIO_FN_MSIOF2_SYNC_C, GPIO_FN_GLO_I0_D,
+ GPIO_FN_SSI_WS1, GPIO_FN_SCL1_B, GPIO_FN_SCL8_B,
+ GPIO_FN_MSIOF2_TXD_C, GPIO_FN_GLO_I1_D,
+ GPIO_FN_SSI_SDATA1, GPIO_FN_SDA1_B,
+ GPIO_FN_SDA8_B, GPIO_FN_MSIOF2_RXD_C,
+ GPIO_FN_SSI_SCK2, GPIO_FN_SCL2, GPIO_FN_GPS_CLK_B,
+ GPIO_FN_GLO_Q0_D, GPIO_FN_HSCK1_E,
+ GPIO_FN_SSI_WS2, GPIO_FN_SDA2, GPIO_FN_GPS_SIGN_B,
+ GPIO_FN_RX2_E, GPIO_FN_GLO_Q1_D, GPIO_FN_HCTS1_N_E,
+ GPIO_FN_SSI_SDATA2, GPIO_FN_GPS_MAG_B,
+ GPIO_FN_TX2_E, GPIO_FN_HRTS1_N_E,
+ GPIO_FN_SSI_SCK34, GPIO_FN_SSI_WS34, GPIO_FN_SSI_SDATA3,
+ GPIO_FN_SSI_SCK4, GPIO_FN_GLO_SS_D,
+ GPIO_FN_SSI_WS4, GPIO_FN_GLO_RFON_D,
+ GPIO_FN_SSI_SDATA4, GPIO_FN_MSIOF2_SCK_D,
+ GPIO_FN_SSI_SCK5, GPIO_FN_MSIOF1_SCK_C,
+ GPIO_FN_TS_SDATA0, GPIO_FN_GLO_I0,
+ GPIO_FN_MSIOF2_SYNC_D, GPIO_FN_VI1_R2_B,
+
+ /* IPSR5 */
+ GPIO_FN_SSI_WS5, GPIO_FN_MSIOF1_SYNC_C, GPIO_FN_TS_SCK0,
+ GPIO_FN_GLO_I1, GPIO_FN_MSIOF2_TXD_D, GPIO_FN_VI1_R3_B,
+ GPIO_FN_SSI_SDATA5, GPIO_FN_MSIOF1_TXD_C, GPIO_FN_TS_SDEN0,
+ GPIO_FN_GLO_Q0, GPIO_FN_MSIOF2_SS1_D, GPIO_FN_VI1_R4_B,
+ GPIO_FN_SSI_SCK6, GPIO_FN_MSIOF1_RXD_C, GPIO_FN_TS_SPSYNC0,
+ GPIO_FN_GLO_Q1, GPIO_FN_MSIOF2_RXD_D, GPIO_FN_VI1_R5_B,
+ GPIO_FN_SSI_WS6, GPIO_FN_GLO_SCLK,
+ GPIO_FN_MSIOF2_SS2_D, GPIO_FN_VI1_R6_B,
+ GPIO_FN_SSI_SDATA6, GPIO_FN_STP_IVCXO27_0_B,
+ GPIO_FN_GLO_SDATA, GPIO_FN_VI1_R7_B,
+ GPIO_FN_SSI_SCK78, GPIO_FN_STP_ISCLK_0_B, GPIO_FN_GLO_SS,
+ GPIO_FN_SSI_WS78, GPIO_FN_TX0_D, GPIO_FN_STP_ISD_0_B, GPIO_FN_GLO_RFON,
+ GPIO_FN_SSI_SDATA7, GPIO_FN_RX0_D, GPIO_FN_STP_ISEN_0_B,
+ GPIO_FN_SSI_SDATA8, GPIO_FN_TX1_D, GPIO_FN_STP_ISSYNC_0_B,
+ GPIO_FN_SSI_SCK9, GPIO_FN_RX1_D, GPIO_FN_GLO_SCLK_D,
+ GPIO_FN_SSI_WS9, GPIO_FN_TX3_D, GPIO_FN_CAN0_TX_D, GPIO_FN_GLO_SDATA_D,
+ GPIO_FN_SSI_SDATA9, GPIO_FN_RX3_D, GPIO_FN_CAN0_RX_D,
+
+ /* IPSR6 */
+ GPIO_FN_AUDIO_CLKB, GPIO_FN_STP_OPWM_0_B, GPIO_FN_MSIOF1_SCK_B,
+ GPIO_FN_SCIF_CLK, GPIO_FN_BPFCLK_E,
+ GPIO_FN_AUDIO_CLKC, GPIO_FN_SCIFB0_SCK_C, GPIO_FN_MSIOF1_SYNC_B,
+ GPIO_FN_RX2, GPIO_FN_SCIFA2_RXD, GPIO_FN_FMIN_E,
+ GPIO_FN_AUDIO_CLKOUT, GPIO_FN_MSIOF1_SS1_B,
+ GPIO_FN_TX2, GPIO_FN_SCIFA2_TXD,
+ GPIO_FN_IRQ0, GPIO_FN_SCIFB1_RXD_D, GPIO_FN_INTC_IRQ0_N,
+ GPIO_FN_IRQ1, GPIO_FN_SCIFB1_SCK_C, GPIO_FN_INTC_IRQ1_N,
+ GPIO_FN_IRQ2, GPIO_FN_SCIFB1_TXD_D, GPIO_FN_INTC_IRQ2_N,
+ GPIO_FN_IRQ3, GPIO_FN_SCL4_C,
+ GPIO_FN_MSIOF2_TXD_E, GPIO_FN_INTC_IRQ3_N,
+ GPIO_FN_IRQ4, GPIO_FN_HRX1_C, GPIO_FN_SDA4_C,
+ GPIO_FN_MSIOF2_RXD_E, GPIO_FN_INTC_IRQ4_N,
+ GPIO_FN_IRQ5, GPIO_FN_HTX1_C, GPIO_FN_SCL1_E, GPIO_FN_MSIOF2_SCK_E,
+ GPIO_FN_IRQ6, GPIO_FN_HSCK1_C, GPIO_FN_MSIOF1_SS2_B,
+ GPIO_FN_SDA1_E, GPIO_FN_MSIOF2_SYNC_E,
+ GPIO_FN_IRQ7, GPIO_FN_HCTS1_N_C, GPIO_FN_MSIOF1_TXD_B,
+ GPIO_FN_GPS_CLK_C, GPIO_FN_GPS_CLK_D,
+ GPIO_FN_IRQ8, GPIO_FN_HRTS1_N_C, GPIO_FN_MSIOF1_RXD_B,
+ GPIO_FN_GPS_SIGN_C, GPIO_FN_GPS_SIGN_D,
+
+ /* IPSR7 */
+ GPIO_FN_IRQ9, GPIO_FN_DU1_DOTCLKIN_B, GPIO_FN_CAN_CLK_D,
+ GPIO_FN_GPS_MAG_C, GPIO_FN_SCIF_CLK_B, GPIO_FN_GPS_MAG_D,
+ GPIO_FN_DU1_DR0, GPIO_FN_LCDOUT0, GPIO_FN_VI1_DATA0_B, GPIO_FN_TX0_B,
+ GPIO_FN_SCIFA0_TXD_B, GPIO_FN_MSIOF2_SCK_B,
+ GPIO_FN_DU1_DR1, GPIO_FN_LCDOUT1, GPIO_FN_VI1_DATA1_B, GPIO_FN_RX0_B,
+ GPIO_FN_SCIFA0_RXD_B, GPIO_FN_MSIOF2_SYNC_B,
+ GPIO_FN_DU1_DR2, GPIO_FN_LCDOUT2, GPIO_FN_SSI_SCK0129_B,
+ GPIO_FN_DU1_DR3, GPIO_FN_LCDOUT3, GPIO_FN_SSI_WS0129_B,
+ GPIO_FN_DU1_DR4, GPIO_FN_LCDOUT4, GPIO_FN_SSI_SDATA0_B,
+ GPIO_FN_DU1_DR5, GPIO_FN_LCDOUT5, GPIO_FN_SSI_SCK1_B,
+ GPIO_FN_DU1_DR6, GPIO_FN_LCDOUT6, GPIO_FN_SSI_WS1_B,
+ GPIO_FN_DU1_DR7, GPIO_FN_LCDOUT7, GPIO_FN_SSI_SDATA1_B,
+ GPIO_FN_DU1_DG0, GPIO_FN_LCDOUT8, GPIO_FN_VI1_DATA2_B, GPIO_FN_TX1_B,
+ GPIO_FN_SCIFA1_TXD_B, GPIO_FN_MSIOF2_SS1_B,
+ GPIO_FN_DU1_DG1, GPIO_FN_LCDOUT9, GPIO_FN_VI1_DATA3_B, GPIO_FN_RX1_B,
+ GPIO_FN_SCIFA1_RXD_B, GPIO_FN_MSIOF2_SS2_B,
+ GPIO_FN_DU1_DG2, GPIO_FN_LCDOUT10, GPIO_FN_VI1_DATA4_B,
+ GPIO_FN_SCIF1_SCK_B, GPIO_FN_SCIFA1_SCK, GPIO_FN_SSI_SCK78_B,
+
+ /* IPSR8 */
+ GPIO_FN_DU1_DG3, GPIO_FN_LCDOUT11,
+ GPIO_FN_VI1_DATA5_B, GPIO_FN_SSI_WS78_B,
+ GPIO_FN_DU1_DG4, GPIO_FN_LCDOUT12, GPIO_FN_VI1_DATA6_B,
+ GPIO_FN_HRX0_B, GPIO_FN_SCIFB2_RXD_B, GPIO_FN_SSI_SDATA7_B,
+ GPIO_FN_DU1_DG5, GPIO_FN_LCDOUT13, GPIO_FN_VI1_DATA7_B,
+ GPIO_FN_HCTS0_N_B, GPIO_FN_SCIFB2_TXD_B, GPIO_FN_SSI_SDATA8_B,
+ GPIO_FN_DU1_DG6, GPIO_FN_LCDOUT14, GPIO_FN_HRTS0_N_B,
+ GPIO_FN_SCIFB2_CTS_N_B, GPIO_FN_SSI_SCK9_B,
+ GPIO_FN_DU1_DG7, GPIO_FN_LCDOUT15, GPIO_FN_HTX0_B,
+ GPIO_FN_SCIFB2_RTS_N_B, GPIO_FN_SSI_WS9_B,
+ GPIO_FN_DU1_DB0, GPIO_FN_LCDOUT16, GPIO_FN_VI1_CLK_B, GPIO_FN_TX2_B,
+ GPIO_FN_SCIFA2_TXD_B, GPIO_FN_MSIOF2_TXD_B,
+ GPIO_FN_DU1_DB1, GPIO_FN_LCDOUT17, GPIO_FN_VI1_HSYNC_N_B,
+ GPIO_FN_RX2_B, GPIO_FN_SCIFA2_RXD_B, GPIO_FN_MSIOF2_RXD_B,
+ GPIO_FN_DU1_DB2, GPIO_FN_LCDOUT18, GPIO_FN_VI1_VSYNC_N_B,
+ GPIO_FN_SCIF2_SCK_B, GPIO_FN_SCIFA2_SCK, GPIO_FN_SSI_SDATA9_B,
+ GPIO_FN_DU1_DB3, GPIO_FN_LCDOUT19, GPIO_FN_VI1_CLKENB_B,
+ GPIO_FN_DU1_DB4, GPIO_FN_LCDOUT20,
+ GPIO_FN_VI1_FIELD_B, GPIO_FN_CAN1_RX,
+ GPIO_FN_DU1_DB5, GPIO_FN_LCDOUT21, GPIO_FN_TX3,
+ GPIO_FN_SCIFA3_TXD, GPIO_FN_CAN1_TX,
+
+ /* IPSR9 */
+ GPIO_FN_DU1_DB6, GPIO_FN_LCDOUT22, GPIO_FN_SCL3_C,
+ GPIO_FN_RX3, GPIO_FN_SCIFA3_RXD,
+ GPIO_FN_DU1_DB7, GPIO_FN_LCDOUT23, GPIO_FN_SDA3_C,
+ GPIO_FN_SCIF3_SCK, GPIO_FN_SCIFA3_SCK,
+ GPIO_FN_DU1_DOTCLKIN, GPIO_FN_QSTVA_QVS,
+ GPIO_FN_DU1_DOTCLKOUT0, GPIO_FN_QCLK,
+ GPIO_FN_DU1_DOTCLKOUT1, GPIO_FN_QSTVB_QVE, GPIO_FN_CAN0_TX,
+ GPIO_FN_TX3_B, GPIO_FN_SCL2_B, GPIO_FN_PWM4,
+ GPIO_FN_DU1_EXHSYNC_DU1_HSYNC, GPIO_FN_QSTH_QHS,
+ GPIO_FN_DU1_EXVSYNC_DU1_VSYNC, GPIO_FN_QSTB_QHE,
+ GPIO_FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
+ GPIO_FN_CAN0_RX, GPIO_FN_RX3_B, GPIO_FN_SDA2_B,
+ GPIO_FN_DU1_DISP, GPIO_FN_QPOLA,
+ GPIO_FN_DU1_CDE, GPIO_FN_QPOLB, GPIO_FN_PWM4_B,
+ GPIO_FN_VI0_CLKENB, GPIO_FN_TX4,
+ GPIO_FN_SCIFA4_TXD, GPIO_FN_TS_SDATA0_D,
+ GPIO_FN_VI0_FIELD, GPIO_FN_RX4, GPIO_FN_SCIFA4_RXD, GPIO_FN_TS_SCK0_D,
+ GPIO_FN_VI0_HSYNC_N, GPIO_FN_TX5,
+ GPIO_FN_SCIFA5_TXD, GPIO_FN_TS_SDEN0_D,
+ GPIO_FN_VI0_VSYNC_N, GPIO_FN_RX5,
+ GPIO_FN_SCIFA5_RXD, GPIO_FN_TS_SPSYNC0_D,
+ GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_SCIF3_SCK_B, GPIO_FN_SCIFA3_SCK_B,
+ GPIO_FN_VI0_G0, GPIO_FN_SCL8, GPIO_FN_STP_IVCXO27_0_C, GPIO_FN_SCL4,
+ GPIO_FN_HCTS2_N, GPIO_FN_SCIFB2_CTS_N, GPIO_FN_ATAWR1_N,
+
+ /* IPSR10 */
+ GPIO_FN_VI0_G1, GPIO_FN_SDA8, GPIO_FN_STP_ISCLK_0_C, GPIO_FN_SDA4,
+ GPIO_FN_HRTS2_N, GPIO_FN_SCIFB2_RTS_N, GPIO_FN_ATADIR1_N,
+ GPIO_FN_VI0_G2, GPIO_FN_VI2_HSYNC_N, GPIO_FN_STP_ISD_0_C,
+ GPIO_FN_SCL3_B, GPIO_FN_HSCK2, GPIO_FN_SCIFB2_SCK, GPIO_FN_ATARD1_N,
+ GPIO_FN_VI0_G3, GPIO_FN_VI2_VSYNC_N, GPIO_FN_STP_ISEN_0_C,
+ GPIO_FN_SDA3_B, GPIO_FN_HRX2, GPIO_FN_SCIFB2_RXD, GPIO_FN_ATACS01_N,
+ GPIO_FN_VI0_G4, GPIO_FN_VI2_CLKENB, GPIO_FN_STP_ISSYNC_0_C,
+ GPIO_FN_HTX2, GPIO_FN_SCIFB2_TXD, GPIO_FN_SCIFB0_SCK_D,
+ GPIO_FN_VI0_G5, GPIO_FN_VI2_FIELD, GPIO_FN_STP_OPWM_0_C,
+ GPIO_FN_FMCLK_D, GPIO_FN_CAN0_TX_E,
+ GPIO_FN_HTX1_D, GPIO_FN_SCIFB0_TXD_D,
+ GPIO_FN_VI0_G6, GPIO_FN_VI2_CLK, GPIO_FN_BPFCLK_D,
+ GPIO_FN_VI0_G7, GPIO_FN_VI2_DATA0, GPIO_FN_FMIN_D,
+ GPIO_FN_VI0_R0, GPIO_FN_VI2_DATA1, GPIO_FN_GLO_I0_B,
+ GPIO_FN_TS_SDATA0_C, GPIO_FN_ATACS11_N,
+ GPIO_FN_VI0_R1, GPIO_FN_VI2_DATA2, GPIO_FN_GLO_I1_B,
+ GPIO_FN_TS_SCK0_C, GPIO_FN_ATAG1_N,
+ GPIO_FN_VI0_R2, GPIO_FN_VI2_DATA3,
+ GPIO_FN_GLO_Q0_B, GPIO_FN_TS_SDEN0_C,
+ GPIO_FN_VI0_R3, GPIO_FN_VI2_DATA4,
+ GPIO_FN_GLO_Q1_B, GPIO_FN_TS_SPSYNC0_C,
+ GPIO_FN_VI0_R4, GPIO_FN_VI2_DATA5, GPIO_FN_GLO_SCLK_B,
+ GPIO_FN_TX0_C, GPIO_FN_SCL1_D,
+
+ /* IPSR11 */
+ GPIO_FN_VI0_R5, GPIO_FN_VI2_DATA6, GPIO_FN_GLO_SDATA_B,
+ GPIO_FN_RX0_C, GPIO_FN_SDA1_D,
+ GPIO_FN_VI0_R6, GPIO_FN_VI2_DATA7, GPIO_FN_GLO_SS_B,
+ GPIO_FN_TX1_C, GPIO_FN_SCL4_B,
+ GPIO_FN_VI0_R7, GPIO_FN_GLO_RFON_B, GPIO_FN_RX1_C, GPIO_FN_CAN0_RX_E,
+ GPIO_FN_SDA4_B, GPIO_FN_HRX1_D, GPIO_FN_SCIFB0_RXD_D,
+ GPIO_FN_VI1_HSYNC_N, GPIO_FN_AVB_RXD0, GPIO_FN_TS_SDATA0_B,
+ GPIO_FN_TX4_B, GPIO_FN_SCIFA4_TXD_B,
+ GPIO_FN_VI1_VSYNC_N, GPIO_FN_AVB_RXD1, GPIO_FN_TS_SCK0_B,
+ GPIO_FN_RX4_B, GPIO_FN_SCIFA4_RXD_B,
+ GPIO_FN_VI1_CLKENB, GPIO_FN_AVB_RXD2, GPIO_FN_TS_SDEN0_B,
+ GPIO_FN_VI1_FIELD, GPIO_FN_AVB_RXD3, GPIO_FN_TS_SPSYNC0_B,
+ GPIO_FN_VI1_CLK, GPIO_FN_AVB_RXD4, GPIO_FN_VI1_DATA0, GPIO_FN_AVB_RXD5,
+ GPIO_FN_VI1_DATA1, GPIO_FN_AVB_RXD6,
+ GPIO_FN_VI1_DATA2, GPIO_FN_AVB_RXD7,
+ GPIO_FN_VI1_DATA3, GPIO_FN_AVB_RX_ER,
+ GPIO_FN_VI1_DATA4, GPIO_FN_AVB_MDIO,
+ GPIO_FN_VI1_DATA5, GPIO_FN_AVB_RX_DV,
+ GPIO_FN_VI1_DATA6, GPIO_FN_AVB_MAGIC,
+ GPIO_FN_VI1_DATA7, GPIO_FN_AVB_MDC,
+ GPIO_FN_ETH_MDIO, GPIO_FN_AVB_RX_CLK, GPIO_FN_SCL2_C,
+ GPIO_FN_ETH_CRS_DV, GPIO_FN_AVB_LINK, GPIO_FN_SDA2_C,
+
+ /* IPSR12 */
+ GPIO_FN_ETH_RX_ER, GPIO_FN_AVB_CRS, GPIO_FN_SCL3, GPIO_FN_SCL7,
+ GPIO_FN_ETH_RXD0, GPIO_FN_AVB_PHY_INT, GPIO_FN_SDA3, GPIO_FN_SDA7,
+ GPIO_FN_ETH_RXD1, GPIO_FN_AVB_GTXREFCLK, GPIO_FN_CAN0_TX_C,
+ GPIO_FN_SCL2_D, GPIO_FN_MSIOF1_RXD_E,
+ GPIO_FN_ETH_LINK, GPIO_FN_AVB_TXD0, GPIO_FN_CAN0_RX_C,
+ GPIO_FN_SDA2_D, GPIO_FN_MSIOF1_SCK_E,
+ GPIO_FN_ETH_REFCLK, GPIO_FN_AVB_TXD1, GPIO_FN_SCIFA3_RXD_B,
+ GPIO_FN_CAN1_RX_C, GPIO_FN_MSIOF1_SYNC_E,
+ GPIO_FN_ETH_TXD1, GPIO_FN_AVB_TXD2, GPIO_FN_SCIFA3_TXD_B,
+ GPIO_FN_CAN1_TX_C, GPIO_FN_MSIOF1_TXD_E,
+ GPIO_FN_ETH_TX_EN, GPIO_FN_AVB_TXD3,
+ GPIO_FN_TCLK1_B, GPIO_FN_CAN_CLK_B,
+ GPIO_FN_ETH_MAGIC, GPIO_FN_AVB_TXD4, GPIO_FN_IETX_C,
+ GPIO_FN_ETH_TXD0, GPIO_FN_AVB_TXD5, GPIO_FN_IECLK_C,
+ GPIO_FN_ETH_MDC, GPIO_FN_AVB_TXD6, GPIO_FN_IERX_C,
+ GPIO_FN_STP_IVCXO27_0, GPIO_FN_AVB_TXD7, GPIO_FN_SCIFB2_TXD_D,
+ GPIO_FN_ADIDATA_B, GPIO_FN_MSIOF0_SYNC_C,
+ GPIO_FN_STP_ISCLK_0, GPIO_FN_AVB_TX_EN, GPIO_FN_SCIFB2_RXD_D,
+ GPIO_FN_ADICS_SAMP_B, GPIO_FN_MSIOF0_SCK_C,
+
+ /* IPSR13 */
+ GPIO_FN_STP_ISD_0, GPIO_FN_AVB_TX_ER, GPIO_FN_SCIFB2_SCK_C,
+ GPIO_FN_ADICLK_B, GPIO_FN_MSIOF0_SS1_C,
+ GPIO_FN_STP_ISEN_0, GPIO_FN_AVB_TX_CLK,
+ GPIO_FN_ADICHS0_B, GPIO_FN_MSIOF0_SS2_C,
+ GPIO_FN_STP_ISSYNC_0, GPIO_FN_AVB_COL,
+ GPIO_FN_ADICHS1_B, GPIO_FN_MSIOF0_RXD_C,
+ GPIO_FN_STP_OPWM_0, GPIO_FN_AVB_GTX_CLK, GPIO_FN_PWM0_B,
+ GPIO_FN_ADICHS2_B, GPIO_FN_MSIOF0_TXD_C,
+ GPIO_FN_SD0_CLK, GPIO_FN_SPCLK_B, GPIO_FN_SD0_CMD, GPIO_FN_MOSI_IO0_B,
+ GPIO_FN_SD0_DATA0, GPIO_FN_MISO_IO1_B,
+ GPIO_FN_SD0_DATA1, GPIO_FN_IO2_B,
+ GPIO_FN_SD0_DATA2, GPIO_FN_IO3_B, GPIO_FN_SD0_DATA3, GPIO_FN_SSL_B,
+ GPIO_FN_SD0_CD, GPIO_FN_MMC_D6_B,
+ GPIO_FN_SIM0_RST_B, GPIO_FN_CAN0_RX_F,
+ GPIO_FN_SCIFA5_TXD_B, GPIO_FN_TX3_C,
+ GPIO_FN_SD0_WP, GPIO_FN_MMC_D7_B, GPIO_FN_SIM0_D_B, GPIO_FN_CAN0_TX_F,
+ GPIO_FN_SCIFA5_RXD_B, GPIO_FN_RX3_C,
+ GPIO_FN_SD1_CMD, GPIO_FN_REMOCON_B,
+ GPIO_FN_SD1_DATA0, GPIO_FN_SPEEDIN_B,
+ GPIO_FN_SD1_DATA1, GPIO_FN_IETX_B, GPIO_FN_SD1_DATA2, GPIO_FN_IECLK_B,
+ GPIO_FN_SD1_DATA3, GPIO_FN_IERX_B,
+ GPIO_FN_SD1_CD, GPIO_FN_PWM0, GPIO_FN_TPU_TO0, GPIO_FN_SCL1_C,
+
+ /* IPSR14 */
+ GPIO_FN_SD1_WP, GPIO_FN_PWM1_B, GPIO_FN_SDA1_C,
+ GPIO_FN_SD2_CLK, GPIO_FN_MMC_CLK, GPIO_FN_SD2_CMD, GPIO_FN_MMC_CMD,
+ GPIO_FN_SD2_DATA0, GPIO_FN_MMC_D0, GPIO_FN_SD2_DATA1, GPIO_FN_MMC_D1,
+ GPIO_FN_SD2_DATA2, GPIO_FN_MMC_D2, GPIO_FN_SD2_DATA3, GPIO_FN_MMC_D3,
+ GPIO_FN_SD2_CD, GPIO_FN_MMC_D4, GPIO_FN_SCL8_C,
+ GPIO_FN_TX5_B, GPIO_FN_SCIFA5_TXD_C,
+ GPIO_FN_SD2_WP, GPIO_FN_MMC_D5, GPIO_FN_SDA8_C,
+ GPIO_FN_RX5_B, GPIO_FN_SCIFA5_RXD_C,
+ GPIO_FN_MSIOF0_SCK, GPIO_FN_RX2_C, GPIO_FN_ADIDATA,
+ GPIO_FN_VI1_CLK_C, GPIO_FN_VI1_G0_B,
+ GPIO_FN_MSIOF0_SYNC, GPIO_FN_TX2_C, GPIO_FN_ADICS_SAMP,
+ GPIO_FN_VI1_CLKENB_C, GPIO_FN_VI1_G1_B,
+ GPIO_FN_MSIOF0_TXD, GPIO_FN_ADICLK,
+ GPIO_FN_VI1_FIELD_C, GPIO_FN_VI1_G2_B,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_ADICHS0,
+ GPIO_FN_VI1_DATA0_C, GPIO_FN_VI1_G3_B,
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MMC_D6, GPIO_FN_ADICHS1, GPIO_FN_TX0_E,
+ GPIO_FN_VI1_HSYNC_N_C, GPIO_FN_SCL7_C, GPIO_FN_VI1_G4_B,
+ GPIO_FN_MSIOF0_SS2, GPIO_FN_MMC_D7, GPIO_FN_ADICHS2, GPIO_FN_RX0_E,
+ GPIO_FN_VI1_VSYNC_N_C, GPIO_FN_SDA7_C, GPIO_FN_VI1_G5_B,
+
+ /* IPSR15 */
+ GPIO_FN_SIM0_RST, GPIO_FN_IETX, GPIO_FN_CAN1_TX_D,
+ GPIO_FN_SIM0_CLK, GPIO_FN_IECLK, GPIO_FN_CAN_CLK_C,
+ GPIO_FN_SIM0_D, GPIO_FN_IERX, GPIO_FN_CAN1_RX_D,
+ GPIO_FN_GPS_CLK, GPIO_FN_DU1_DOTCLKIN_C, GPIO_FN_AUDIO_CLKB_B,
+ GPIO_FN_PWM5_B, GPIO_FN_SCIFA3_TXD_C,
+ GPIO_FN_GPS_SIGN, GPIO_FN_TX4_C, GPIO_FN_SCIFA4_TXD_C, GPIO_FN_PWM5,
+ GPIO_FN_VI1_G6_B, GPIO_FN_SCIFA3_RXD_C,
+ GPIO_FN_GPS_MAG, GPIO_FN_RX4_C, GPIO_FN_SCIFA4_RXD_C, GPIO_FN_PWM6,
+ GPIO_FN_VI1_G7_B, GPIO_FN_SCIFA3_SCK_C,
+ GPIO_FN_HCTS0_N, GPIO_FN_SCIFB0_CTS_N, GPIO_FN_GLO_I0_C,
+ GPIO_FN_TCLK1, GPIO_FN_VI1_DATA1_C,
+ GPIO_FN_HRTS0_N, GPIO_FN_SCIFB0_RTS_N,
+ GPIO_FN_GLO_I1_C, GPIO_FN_VI1_DATA2_C,
+ GPIO_FN_HSCK0, GPIO_FN_SCIFB0_SCK, GPIO_FN_GLO_Q0_C, GPIO_FN_CAN_CLK,
+ GPIO_FN_TCLK2, GPIO_FN_VI1_DATA3_C,
+ GPIO_FN_HRX0, GPIO_FN_SCIFB0_RXD, GPIO_FN_GLO_Q1_C,
+ GPIO_FN_CAN0_RX_B, GPIO_FN_VI1_DATA4_C,
+ GPIO_FN_HTX0, GPIO_FN_SCIFB0_TXD, GPIO_FN_GLO_SCLK_C,
+ GPIO_FN_CAN0_TX_B, GPIO_FN_VI1_DATA5_C,
+
+ /* IPSR16 */
+ GPIO_FN_HRX1, GPIO_FN_SCIFB1_RXD, GPIO_FN_VI1_R0_B,
+ GPIO_FN_GLO_SDATA_C, GPIO_FN_VI1_DATA6_C,
+ GPIO_FN_HTX1, GPIO_FN_SCIFB1_TXD, GPIO_FN_VI1_R1_B,
+ GPIO_FN_GLO_SS_C, GPIO_FN_VI1_DATA7_C,
+ GPIO_FN_HSCK1, GPIO_FN_SCIFB1_SCK, GPIO_FN_MLB_CK, GPIO_FN_GLO_RFON_C,
+ GPIO_FN_HCTS1_N, GPIO_FN_SCIFB1_CTS_N,
+ GPIO_FN_MLB_SIG, GPIO_FN_CAN1_TX_B,
+ GPIO_FN_HRTS1_N, GPIO_FN_SCIFB1_RTS_N,
+ GPIO_FN_MLB_DAT, GPIO_FN_CAN1_RX_B,
+};
+
+#endif /* __ASM_R8A7791_H__ */
--- /dev/null
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7791.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_R8A7791_H
+#define __ASM_ARCH_R8A7791_H
+
+/*
+ * R8A7791 I/O Addresses
+ */
+#define RWDT_BASE 0xE6020000
+#define SWDT_BASE 0xE6030000
+#define LBSC_BASE 0xFEC00200
+#define DBSC3_0_BASE 0xE6790000
+#define DBSC3_1_BASE 0xE67A0000
+#define TMU_BASE 0xE61E0000
+#define GPIO5_BASE 0xE6055000
+
+#define S3C_BASE 0xE6784000
+#define S3C_INT_BASE 0xE6784A00
+#define S3C_MEDIA_BASE 0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE 0xE6784BDC
+#define S3C_QOS_CCI0_BASE 0xE6784C00
+#define S3C_QOS_CCI1_BASE 0xE6784C24
+#define S3C_QOS_MXI_BASE 0xE6784C48
+#define S3C_QOS_AXI_BASE 0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE 0xE6791000
+#define DBSC3_0_QOS_R1_BASE 0xE6791100
+#define DBSC3_0_QOS_R2_BASE 0xE6791200
+#define DBSC3_0_QOS_R3_BASE 0xE6791300
+#define DBSC3_0_QOS_R4_BASE 0xE6791400
+#define DBSC3_0_QOS_R5_BASE 0xE6791500
+#define DBSC3_0_QOS_R6_BASE 0xE6791600
+#define DBSC3_0_QOS_R7_BASE 0xE6791700
+#define DBSC3_0_QOS_R8_BASE 0xE6791800
+#define DBSC3_0_QOS_R9_BASE 0xE6791900
+#define DBSC3_0_QOS_R10_BASE 0xE6791A00
+#define DBSC3_0_QOS_R11_BASE 0xE6791B00
+#define DBSC3_0_QOS_R12_BASE 0xE6791C00
+#define DBSC3_0_QOS_R13_BASE 0xE6791D00
+#define DBSC3_0_QOS_R14_BASE 0xE6791E00
+#define DBSC3_0_QOS_R15_BASE 0xE6791F00
+#define DBSC3_0_QOS_W0_BASE 0xE6792000
+#define DBSC3_0_QOS_W1_BASE 0xE6792100
+#define DBSC3_0_QOS_W2_BASE 0xE6792200
+#define DBSC3_0_QOS_W3_BASE 0xE6792300
+#define DBSC3_0_QOS_W4_BASE 0xE6792400
+#define DBSC3_0_QOS_W5_BASE 0xE6792500
+#define DBSC3_0_QOS_W6_BASE 0xE6792600
+#define DBSC3_0_QOS_W7_BASE 0xE6792700
+#define DBSC3_0_QOS_W8_BASE 0xE6792800
+#define DBSC3_0_QOS_W9_BASE 0xE6792900
+#define DBSC3_0_QOS_W10_BASE 0xE6792A00
+#define DBSC3_0_QOS_W11_BASE 0xE6792B00
+#define DBSC3_0_QOS_W12_BASE 0xE6792C00
+#define DBSC3_0_QOS_W13_BASE 0xE6792D00
+#define DBSC3_0_QOS_W14_BASE 0xE6792E00
+#define DBSC3_0_QOS_W15_BASE 0xE6792F00
+
+#define DBSC3_1_QOS_R0_BASE 0xE67A1000
+#define DBSC3_1_QOS_R1_BASE 0xE67A1100
+#define DBSC3_1_QOS_R2_BASE 0xE67A1200
+#define DBSC3_1_QOS_R3_BASE 0xE67A1300
+#define DBSC3_1_QOS_R4_BASE 0xE67A1400
+#define DBSC3_1_QOS_R5_BASE 0xE67A1500
+#define DBSC3_1_QOS_R6_BASE 0xE67A1600
+#define DBSC3_1_QOS_R7_BASE 0xE67A1700
+#define DBSC3_1_QOS_R8_BASE 0xE67A1800
+#define DBSC3_1_QOS_R9_BASE 0xE67A1900
+#define DBSC3_1_QOS_R10_BASE 0xE67A1A00
+#define DBSC3_1_QOS_R11_BASE 0xE67A1B00
+#define DBSC3_1_QOS_R12_BASE 0xE67A1C00
+#define DBSC3_1_QOS_R13_BASE 0xE67A1D00
+#define DBSC3_1_QOS_R14_BASE 0xE67A1E00
+#define DBSC3_1_QOS_R15_BASE 0xE67A1F00
+#define DBSC3_1_QOS_W0_BASE 0xE67A2000
+#define DBSC3_1_QOS_W1_BASE 0xE67A2100
+#define DBSC3_1_QOS_W2_BASE 0xE67A2200
+#define DBSC3_1_QOS_W3_BASE 0xE67A2300
+#define DBSC3_1_QOS_W4_BASE 0xE67A2400
+#define DBSC3_1_QOS_W5_BASE 0xE67A2500
+#define DBSC3_1_QOS_W6_BASE 0xE67A2600
+#define DBSC3_1_QOS_W7_BASE 0xE67A2700
+#define DBSC3_1_QOS_W8_BASE 0xE67A2800
+#define DBSC3_1_QOS_W9_BASE 0xE67A2900
+#define DBSC3_1_QOS_W10_BASE 0xE67A2A00
+#define DBSC3_1_QOS_W11_BASE 0xE67A2B00
+#define DBSC3_1_QOS_W12_BASE 0xE67A2C00
+#define DBSC3_1_QOS_W13_BASE 0xE67A2D00
+#define DBSC3_1_QOS_W14_BASE 0xE67A2E00
+#define DBSC3_1_QOS_W15_BASE 0xE67A2F00
+
+#define DBSC3_0_DBADJ2 0xE67900C8
+
+#define CCI_400_MAXOT_1 0xF0091110
+#define CCI_400_MAXOT_2 0xF0092110
+#define CCI_400_QOSCNTL_1 0xF009110C
+#define CCI_400_QOSCNTL_2 0xF009210C
+
+#define MXI_BASE 0xFE960000
+#define MXI_QOS_BASE 0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE 0xFF800300
+#define SYS_AXI_AVB_BASE 0xFF800340
+#define SYS_AXI_G2D_BASE 0xFF800540
+#define SYS_AXI_IMP0_BASE 0xFF800580
+#define SYS_AXI_IMP1_BASE 0xFF8005C0
+#define SYS_AXI_IMUX0_BASE 0xFF800600
+#define SYS_AXI_IMUX1_BASE 0xFF800640
+#define SYS_AXI_IMUX2_BASE 0xFF800680
+#define SYS_AXI_LBS_BASE 0xFF8006C0
+#define SYS_AXI_MMUDS_BASE 0xFF800700
+#define SYS_AXI_MMUM_BASE 0xFF800740
+#define SYS_AXI_MMUR_BASE 0xFF800780
+#define SYS_AXI_MMUS0_BASE 0xFF8007C0
+#define SYS_AXI_MMUS1_BASE 0xFF800800
+#define SYS_AXI_MTSB0_BASE 0xFF800880
+#define SYS_AXI_MTSB1_BASE 0xFF8008C0
+#define SYS_AXI_PCI_BASE 0xFF800900
+#define SYS_AXI_RTX_BASE 0xFF800940
+#define SYS_AXI_SDS0_BASE 0xFF800A80
+#define SYS_AXI_SDS1_BASE 0xFF800AC0
+#define SYS_AXI_USB20_BASE 0xFF800C00
+#define SYS_AXI_USB21_BASE 0xFF800C40
+#define SYS_AXI_USB22_BASE 0xFF800C80
+#define SYS_AXI_USB30_BASE 0xFF800CC0
+#define SYS_AXI_AX2M_BASE 0xFF800380
+#define SYS_AXI_CC50_BASE 0xFF8003C0
+#define SYS_AXI_CCI_BASE 0xFF800440
+#define SYS_AXI_CS_BASE 0xFF800480
+#define SYS_AXI_DDM_BASE 0xFF8004C0
+#define SYS_AXI_ETH_BASE 0xFF800500
+#define SYS_AXI_MPXM_BASE 0xFF800840
+#define SYS_AXI_SAT0_BASE 0xFF800980
+#define SYS_AXI_SAT1_BASE 0xFF8009C0
+#define SYS_AXI_SDM0_BASE 0xFF800A00
+#define SYS_AXI_SDM1_BASE 0xFF800A40
+#define SYS_AXI_TRAB_BASE 0xFF800B00
+#define SYS_AXI_UDM0_BASE 0xFF800B80
+#define SYS_AXI_UDM1_BASE 0xFF800BC0
+
+#define RT_AXI_SHX_BASE 0xFF810100
+#define RT_AXI_DBG_BASE 0xFF810140
+#define RT_AXI_RDM_BASE 0xFF810180
+#define RT_AXI_RDS_BASE 0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE 0xFF810200
+#define RT_AXI_STPRO_BASE 0xFF810240
+#define RT_AXI_SY2RT_BASE 0xFF810280
+
+#define MP_AXI_ADSP_BASE 0xFF820100
+#define MP_AXI_ASDS0_BASE 0xFF8201C0
+#define MP_AXI_ASDS1_BASE 0xFF820200
+#define MP_AXI_MLP_BASE 0xFF820240
+#define MP_AXI_MMUMP_BASE 0xFF820280
+#define MP_AXI_SPU_BASE 0xFF8202C0
+#define MP_AXI_SPUC_BASE 0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE 0xFF860100
+#define SYS_AXI256_SYX_BASE 0xFF860140
+#define SYS_AXI256_MPX_BASE 0xFF860180
+#define SYS_AXI256_MXI_BASE 0xFF8601C0
+
+#define CCI_AXI_MMUS0_BASE 0xFF880100
+#define CCI_AXI_SYX2_BASE 0xFF880140
+#define CCI_AXI_MMUR_BASE 0xFF880180
+#define CCI_AXI_MMUDS_BASE 0xFF8801C0
+#define CCI_AXI_MMUM_BASE 0xFF880200
+#define CCI_AXI_MXI_BASE 0xFF880240
+#define CCI_AXI_MMUS1_BASE 0xFF880280
+#define CCI_AXI_MMUMP_BASE 0xFF8802C0
+
+#define MEDIA_AXI_MXR_BASE 0xFE960080
+#define MEDIA_AXI_MXW_BASE 0xFE9600C0
+#define MEDIA_AXI_JPR_BASE 0xFE964100
+#define MEDIA_AXI_JPW_BASE 0xFE966100
+#define MEDIA_AXI_GCU0R_BASE 0xFE964140
+#define MEDIA_AXI_GCU0W_BASE 0xFE966140
+#define MEDIA_AXI_GCU1R_BASE 0xFE964180
+#define MEDIA_AXI_GCU1W_BASE 0xFE966180
+#define MEDIA_AXI_TDMR_BASE 0xFE964500
+#define MEDIA_AXI_TDMW_BASE 0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE 0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE 0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE 0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE 0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE 0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE 0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE 0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE 0xFE966600
+#define MEDIA_AXI_VIN0W_BASE 0xFE966900
+#define MEDIA_AXI_VSP0R_BASE 0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE 0xFE966D00
+#define MEDIA_AXI_FDP0R_BASE 0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE 0xFE966D40
+#define MEDIA_AXI_IMSR_BASE 0xFE964D80
+#define MEDIA_AXI_IMSW_BASE 0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE 0xFE965100
+#define MEDIA_AXI_VSP1W_BASE 0xFE967100
+#define MEDIA_AXI_FDP1R_BASE 0xFE965140
+#define MEDIA_AXI_FDP1W_BASE 0xFE967140
+#define MEDIA_AXI_IMRR_BASE 0xFE965180
+#define MEDIA_AXI_IMRW_BASE 0xFE967180
+#define MEDIA_AXI_FDP2R_BASE 0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE 0xFE966DC0
+#define MEDIA_AXI_VSPD0R_BASE 0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE 0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE 0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE 0xFE967540
+#define MEDIA_AXI_DU0R_BASE 0xFE965580
+#define MEDIA_AXI_DU0W_BASE 0xFE967580
+#define MEDIA_AXI_DU1R_BASE 0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE 0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE 0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE 0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE 0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE 0xFE967940
+#define MEDIA_AXI_VPC0R_BASE 0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE 0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE 0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE 0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE 0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE 0xFE965D80
+
+#define SYS_AXI_AVBDMSCR 0xFF802000
+#define SYS_AXI_SYX2DMSCR 0xFF802004
+#define SYS_AXI_CC50DMSCR 0xFF802008
+#define SYS_AXI_CC51DMSCR 0xFF80200C
+#define SYS_AXI_CCIDMSCR 0xFF802010
+#define SYS_AXI_CSDMSCR 0xFF802014
+#define SYS_AXI_DDMDMSCR 0xFF802018
+#define SYS_AXI_ETHDMSCR 0xFF80201C
+#define SYS_AXI_G2DDMSCR 0xFF802020
+#define SYS_AXI_IMP0DMSCR 0xFF802024
+#define SYS_AXI_IMP1DMSCR 0xFF802028
+#define SYS_AXI_LBSDMSCR 0xFF80202C
+#define SYS_AXI_MMUDSDMSCR 0xFF802030
+#define SYS_AXI_MMUMXDMSCR 0xFF802034
+#define SYS_AXI_MMURDDMSCR 0xFF802038
+#define SYS_AXI_MMUS0DMSCR 0xFF80203C
+#define SYS_AXI_MMUS1DMSCR 0xFF802040
+#define SYS_AXI_MPXDMSCR 0xFF802044
+#define SYS_AXI_MTSB0DMSCR 0xFF802048
+#define SYS_AXI_MTSB1DMSCR 0xFF80204C
+#define SYS_AXI_PCIDMSCR 0xFF802050
+#define SYS_AXI_RTXDMSCR 0xFF802054
+#define SYS_AXI_SAT0DMSCR 0xFF802058
+#define SYS_AXI_SAT1DMSCR 0xFF80205C
+#define SYS_AXI_SDM0DMSCR 0xFF802060
+#define SYS_AXI_SDM1DMSCR 0xFF802064
+#define SYS_AXI_SDS0DMSCR 0xFF802068
+#define SYS_AXI_SDS1DMSCR 0xFF80206C
+#define SYS_AXI_ETRABDMSCR 0xFF802070
+#define SYS_AXI_ETRKFDMSCR 0xFF802074
+#define SYS_AXI_UDM0DMSCR 0xFF802078
+#define SYS_AXI_UDM1DMSCR 0xFF80207C
+#define SYS_AXI_USB20DMSCR 0xFF802080
+#define SYS_AXI_USB21DMSCR 0xFF802084
+#define SYS_AXI_USB22DMSCR 0xFF802088
+#define SYS_AXI_USB30DMSCR 0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR 0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR 0xFF802104
+#define SYS_AXI_AVBSLVDMSCR 0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR 0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR 0xFF802110
+#define SYS_AXI_GICSLVDMSCR 0xFF802114
+#define SYS_AXI_IMPSLVDMSCR 0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR 0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR 0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR 0xFF802124
+#define SYS_AXI_LBSSLVDMSCR 0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR 0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR 0xFF802130
+#define SYS_AXI_MPXSLVDMSCR 0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR 0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR 0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR 0xFF802140
+#define SYS_AXI_PCISLVDMSCR 0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR 0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR 0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR 0xFF802150
+#define SYS_AXI_SAT0SLVDMSCR 0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR 0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR 0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR 0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR 0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR 0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR 0xFF802180
+#define SYS_AXI_STBSLVDMSCR 0xFF802188
+#define SYS_AXI_STMSLVDMSCR 0xFF80218C
+#define SYS_AXI_TSPL0SLVDMSCR 0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR 0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR 0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR 0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR 0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR 0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR 0xFF8021AC
+
+#define RT_AXI_CBMDMSCR 0xFF812000
+#define RT_AXI_DBDMSCR 0xFF812004
+#define RT_AXI_RDMDMSCR 0xFF812008
+#define RT_AXI_RDSDMSCR 0xFF81200C
+#define RT_AXI_STRDMSCR 0xFF812010
+#define RT_AXI_SY2RTDMSCR 0xFF812014
+#define RT_AXI_CBSSLVDMSCR 0xFF812100
+#define RT_AXI_DBSSLVDMSCR 0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR 0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR 0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR 0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR 0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR 0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR 0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR 0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR 0xFF812128
+
+#define MP_AXI_ADSPDMSCR 0xFF822000
+#define MP_AXI_ASDM0DMSCR 0xFF822004
+#define MP_AXI_ASDM1DMSCR 0xFF822008
+#define MP_AXI_ASDS0DMSCR 0xFF82200C
+#define MP_AXI_ASDS1DMSCR 0xFF822010
+#define MP_AXI_MLPDMSCR 0xFF822014
+#define MP_AXI_MMUMPDMSCR 0xFF822018
+#define MP_AXI_SPUDMSCR 0xFF82201C
+#define MP_AXI_SPUCDMSCR 0xFF822020
+#define MP_AXI_SY2MPDMSCR 0xFF822024
+#define MP_AXI_ADSPSLVDMSCR 0xFF822100
+#define MP_AXI_MLMSLVDMSCR 0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR 0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR 0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR 0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR 0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR 0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR 0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR 0xFF822124
+#define MP_AXI_SPUSLVDMSCR 0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR 0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR 0xFF842000
+#define ADM_AXI_ASDM1DMSCR 0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR 0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR 0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR 0xFF84210C
+
+#define DM_AXI_RDMDMSCR 0xFF852000
+#define DM_AXI_SDM0DMSCR 0xFF852004
+#define DM_AXI_SDM1DMSCR 0xFF852008
+#define DM_AXI_MMAP0SLVDMSCR 0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR 0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR 0xFF852108
+#define DM_AXI_RAP4SLVDMSCR 0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR 0xFF852110
+#define DM_AXI_SAP4SLVDMSCR 0xFF852114
+#define DM_AXI_SAP5SLVDMSCR 0xFF852118
+#define DM_AXI_SAP6SLVDMSCR 0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR 0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR 0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR 0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR 0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR 0xFF852130
+
+#define SYS_AXI256_SYXDMSCR 0xFF862000
+#define SYS_AXI256_MPXDMSCR 0xFF862004
+#define SYS_AXI256_MXIDMSCR 0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR 0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR 0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR 0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR 0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR 0xFF862110
+
+#define MXT_SYXDMSCR 0xFF872000
+#define MXT_CMM0SLVDMSCR 0xFF872100
+#define MXT_CMM1SLVDMSCR 0xFF872104
+#define MXT_CMM2SLVDMSCR 0xFF872108
+#define MXT_FDPSLVDMSCR 0xFF87210C
+#define MXT_IMRSLVDMSCR 0xFF872110
+#define MXT_VINSLVDMSCR 0xFF872114
+#define MXT_VPC0SLVDMSCR 0xFF872118
+#define MXT_VPC1SLVDMSCR 0xFF87211C
+#define MXT_VSP0SLVDMSCR 0xFF872120
+#define MXT_VSP1SLVDMSCR 0xFF872124
+#define MXT_VSPD0SLVDMSCR 0xFF872128
+#define MXT_VSPD1SLVDMSCR 0xFF87212C
+#define MXT_MAP1SLVDMSCR 0xFF872130
+#define MXT_MAP2SLVDMSCR 0xFF872134
+
+#define CCI_AXI_MMUS0DMSCR 0xFF882000
+#define CCI_AXI_SYX2DMSCR 0xFF882004
+#define CCI_AXI_MMURDMSCR 0xFF882008
+#define CCI_AXI_MMUDSDMSCR 0xFF88200C
+#define CCI_AXI_MMUMDMSCR 0xFF882010
+#define CCI_AXI_MXIDMSCR 0xFF882014
+#define CCI_AXI_MMUS1DMSCR 0xFF882018
+#define CCI_AXI_MMUMPDMSCR 0xFF88201C
+#define CCI_AXI_DVMDMSCR 0xFF882020
+#define CCI_AXI_CCISLVDMSCR 0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR 0xFF880400
+#define CCI_AXI_IPMMURDVMCR 0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR 0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR 0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR 0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR 0xFF880414
+#define CCI_AXI_AX2ADDRMASK 0xFF88041C
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7791_rwdt {
+ u32 rwtcnt; /* 0x00 */
+ u32 rwtcsra; /* 0x04 */
+ u16 rwtcsrb; /* 0x08 */
+};
+
+/* SWDT */
+struct r8a7791_swdt {
+ u32 swtcnt; /* 0x00 */
+ u32 swtcsra; /* 0x04 */
+ u16 swtcsrb; /* 0x08 */
+};
+
+/* LBSC */
+struct r8a7791_lbsc {
+ u32 cs0ctrl;
+ u32 cs1ctrl;
+ u32 ecs0ctrl;
+ u32 ecs1ctrl;
+ u32 ecs2ctrl;
+ u32 ecs3ctrl;
+ u32 ecs4ctrl;
+ u32 ecs5ctrl;
+ u32 dummy0[4]; /* 0x20 .. 0x2C */
+ u32 cswcr0;
+ u32 cswcr1;
+ u32 ecswcr0;
+ u32 ecswcr1;
+ u32 ecswcr2;
+ u32 ecswcr3;
+ u32 ecswcr4;
+ u32 ecswcr5;
+ u32 exdmawcr0;
+ u32 exdmawcr1;
+ u32 exdmawcr2;
+ u32 dummy1[9]; /* 0x5C .. 0x7C */
+ u32 cspwcr0;
+ u32 cspwcr1;
+ u32 ecspwcr0;
+ u32 ecspwcr1;
+ u32 ecspwcr2;
+ u32 ecspwcr3;
+ u32 ecspwcr4;
+ u32 ecspwcr5;
+ u32 exwtsync;
+ u32 dummy2[3]; /* 0xA4 .. 0xAC */
+ u32 cs0bstctl;
+ u32 cs0btph;
+ u32 dummy3[2]; /* 0xB8 .. 0xBC */
+ u32 cs1gdst;
+ u32 ecs0gdst;
+ u32 ecs1gdst;
+ u32 ecs2gdst;
+ u32 ecs3gdst;
+ u32 ecs4gdst;
+ u32 ecs5gdst;
+ u32 dummy4[5]; /* 0xDC .. 0xEC */
+ u32 exdmaset0;
+ u32 exdmaset1;
+ u32 exdmaset2;
+ u32 dummy5[5]; /* 0xFC .. 0x10C */
+ u32 exdmcr0;
+ u32 exdmcr1;
+ u32 exdmcr2;
+ u32 dummy6[5]; /* 0x11C .. 0x12C */
+ u32 bcintsr;
+ u32 bcintcr;
+ u32 bcintmr;
+ u32 dummy7; /* 0x13C */
+ u32 exbatlv;
+ u32 exwtsts;
+ u32 dummy8[14]; /* 0x148 .. 0x17C */
+ u32 atacsctrl;
+ u32 dummy9[15]; /* 0x184 .. 0x1BC */
+ u32 exbct;
+ u32 extct;
+};
+
+/* DBSC3 */
+struct r8a7791_dbsc3 {
+ u32 dummy0[3]; /* 0x00 .. 0x08 */
+ u32 dbstate1;
+ u32 dbacen;
+ u32 dbrfen;
+ u32 dbcmd;
+ u32 dbwait;
+ u32 dbkind;
+ u32 dbconf0;
+ u32 dummy1[2]; /* 0x28 .. 0x2C */
+ u32 dbphytype;
+ u32 dummy2[3]; /* 0x34 .. 0x3C */
+ u32 dbtr0;
+ u32 dbtr1;
+ u32 dbtr2;
+ u32 dummy3; /* 0x4C */
+ u32 dbtr3;
+ u32 dbtr4;
+ u32 dbtr5;
+ u32 dbtr6;
+ u32 dbtr7;
+ u32 dbtr8;
+ u32 dbtr9;
+ u32 dbtr10;
+ u32 dbtr11;
+ u32 dbtr12;
+ u32 dbtr13;
+ u32 dbtr14;
+ u32 dbtr15;
+ u32 dbtr16;
+ u32 dbtr17;
+ u32 dbtr18;
+ u32 dbtr19;
+ u32 dummy4[7]; /* 0x94 .. 0xAC */
+ u32 dbbl;
+ u32 dummy5[3]; /* 0xB4 .. 0xBC */
+ u32 dbadj0;
+ u32 dummy6; /* 0xC4 */
+ u32 dbadj2;
+ u32 dummy7[5]; /* 0xCC .. 0xDC */
+ u32 dbrfcnf0;
+ u32 dbrfcnf1;
+ u32 dbrfcnf2;
+ u32 dummy8[2]; /* 0xEC .. 0xF0 */
+ u32 dbcalcnf;
+ u32 dbcaltr;
+ u32 dummy9; /* 0xFC */
+ u32 dbrnk0;
+ u32 dummy10[31]; /* 0x104 .. 0x17C */
+ u32 dbpdncnf;
+ u32 dummy11[47]; /* 0x184 ..0x23C */
+ u32 dbdfistat;
+ u32 dbdficnt;
+ u32 dummy12[14]; /* 0x248 .. 0x27C */
+ u32 dbpdlck;
+ u32 dummy13[3]; /* 0x284 .. 0x28C */
+ u32 dbpdrga;
+ u32 dummy14[3]; /* 0x294 .. 0x29C */
+ u32 dbpdrgd;
+ u32 dummy15[24]; /* 0x2A4 .. 0x300 */
+ u32 dbbs0cnt1;
+ u32 dummy16[30]; /* 0x308 .. 0x37C */
+ u32 dbwt0cnf0;
+ u32 dbwt0cnf1;
+ u32 dbwt0cnf2;
+ u32 dbwt0cnf3;
+ u32 dbwt0cnf4;
+};
+
+/* GPIO */
+struct r8a7791_gpio {
+ u32 iointsel;
+ u32 inoutsel;
+ u32 outdt;
+ u32 indt;
+ u32 intdt;
+ u32 intclr;
+ u32 intmsk;
+ u32 posneg;
+ u32 edglevel;
+ u32 filonoff;
+ u32 intmsks;
+ u32 mskclrs;
+ u32 outdtsel;
+ u32 outdth;
+ u32 outdtl;
+ u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct r8a7791_s3c {
+ u32 s3cexcladdmsk;
+ u32 s3cexclidmsk;
+ u32 s3cadsplcr;
+ u32 s3cmaar;
+ u32 dummy0; /* 0x10 */
+ u32 s3crorr;
+ u32 s3cworr;
+ u32 s3carcr22;
+ u32 dummy1[2]; /* 0x20 .. 0x24 */
+ u32 s3cmctr;
+ u32 dummy2; /* 0x2C */
+ u32 cconf0;
+ u32 cconf1;
+ u32 cconf2;
+ u32 cconf3;
+};
+
+struct r8a7791_s3c_qos {
+ u32 s3cqos0;
+ u32 s3cqos1;
+ u32 s3cqos2;
+ u32 s3cqos3;
+ u32 s3cqos4;
+ u32 s3cqos5;
+ u32 s3cqos6;
+ u32 s3cqos7;
+ u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct r8a7791_dbsc3_qos {
+ u32 dblgcnt;
+ u32 dbtmval0;
+ u32 dbtmval1;
+ u32 dbtmval2;
+ u32 dbtmval3;
+ u32 dbrqctr;
+ u32 dbthres0;
+ u32 dbthres1;
+ u32 dbthres2;
+ u32 dummy0; /* 0x24 */
+ u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct r8a7791_mxi {
+ u32 mxsaar0;
+ u32 mxsaar1;
+ u32 dummy0[8]; /* 0x08 .. 0x24 */
+ u32 mxs3cracr;
+ u32 dummy1[3]; /* 0x2C .. 0x34 */
+ u32 mxs3cwacr;
+ u32 dummy2; /* 0x3C */
+ u32 mxrtcr;
+ u32 mxwtcr;
+};
+
+struct r8a7791_mxi_qos {
+ u32 vspdu0;
+ u32 vspdu1;
+ u32 du0;
+ u32 du1;
+};
+
+/* AXI(QoS) */
+struct r8a7791_axi_qos {
+ u32 qosconf;
+ u32 qosctset0;
+ u32 qosctset1;
+ u32 qosctset2;
+ u32 qosctset3;
+ u32 qosreqctr;
+ u32 qosthres0;
+ u32 qosthres1;
+ u32 qosthres2;
+ u32 qosqon;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7791_H */
#include <asm/arch/sh73a0.h>
#elif defined(CONFIG_R8A7740)
#include <asm/arch/r8a7740.h>
+#elif defined(CONFIG_R8A7790)
+#include <asm/arch/r8a7790.h>
+#elif defined(CONFIG_R8A7791)
+#include <asm/arch/r8a7791.h>
#else
#error "SOC Name not defined"
#endif
int s5p_sdhci_init(u32 regbase, int index, int bus_width);
-static inline unsigned int s5p_mmc_init(int index, int bus_width)
+static inline int s5p_mmc_init(int index, int bus_width)
{
unsigned int base = samsung_get_base_mmc() +
(S5P_MMC_DEV_OFFSET * index);
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _FREEZE_CONTROLLER_H_
+#define _FREEZE_CONTROLLER_H_
+
+struct socfpga_freeze_controller {
+ u32 vioctrl;
+ u32 padding[3];
+ u32 hioctrl;
+ u32 src;
+ u32 hwctrl;
+};
+
+#define FREEZE_CHANNEL_NUM (4)
+
+typedef enum {
+ FREEZE_CTRL_FROZEN = 0,
+ FREEZE_CTRL_THAWED = 1
+} FREEZE_CTRL_CHAN_STATE;
+
+#define SYSMGR_FRZCTRL_ADDRESS 0x40
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW 0x0
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_HW 0x1
+#define SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK 0x00000080
+#define SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK 0x00000040
+#define SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK 0x00000100
+#define SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK 0x00000020
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1
+#define SYSMGR_FRZCTRL_VIOCTRL_SHIFT 0x2
+
+void sys_mgr_frzctrl_freeze_req(void);
+void sys_mgr_frzctrl_thaw_req(void);
+
+#endif /* _FREEZE_CONTROLLER_H_ */
(0xFF << EMIF_SYS_ADDR_SHIFT))
#define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14
/* Reg mapping structure */
struct emif_reg_struct {
u32 emif_ddr_phy_ctrl_2;
u32 padding7[12];
u32 emif_rd_wr_exec_thresh;
- u32 padding8[55];
+ u32 padding8[7];
+ u32 emif_ddr_phy_status[21];
+ u32 padding9[27];
u32 emif_ddr_ext_phy_ctrl_1;
u32 emif_ddr_ext_phy_ctrl_1_shdw;
u32 emif_ddr_ext_phy_ctrl_2;
u32 emif_ddr_ext_phy_ctrl_23_shdw;
u32 emif_ddr_ext_phy_ctrl_24;
u32 emif_ddr_ext_phy_ctrl_24_shdw;
+ u32 padding[22];
+ u32 emif_ddr_fifo_misaligned_clear_1;
+ u32 emif_ddr_fifo_misaligned_clear_2;
};
struct dmm_lisa_map_regs {
s8 mr16;
};
+struct read_write_regs {
+ u32 read_reg;
+ u32 write_reg;
+};
+
/* assert macros */
#if defined(DEBUG)
#define emif_assert(c) ({ if (!(c)) for (;;); })
void config_data_eye_leveling_samples(u32 emif_base);
u32 emif_sdram_type(void);
+const struct read_write_regs *get_bug_regs(u32 *iterations);
#endif
u32 cm_l3init_hsusbotg_clkctrl;
u32 cm_l3init_hsusbtll_clkctrl;
u32 cm_l3init_p1500_clkctrl;
+ u32 cm_l3init_sata_clkctrl;
u32 cm_l3init_fsusb_clkctrl;
u32 cm_l3init_ocp2scp1_clkctrl;
u32 cm_l3init_ocp2scp3_clkctrl;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
u32 control_usbotghs_ctrl;
+ u32 control_phy_power_sata;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
extern u32 *const omap_si_rev;
return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
}
+
+#define DRA7XX 0x07000000
+
+static inline u8 is_dra7xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == DRA7XX);
+}
#endif
/*
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clk.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91sam9263.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_common.h>
/* Configure RDY/BSY */
#ifdef CONFIG_SYS_NAND_READY_PIN
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
#endif
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#ifdef CONFIG_MACB
static void vl_ma2sc_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
-
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <atmel_mci.h>
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#ifdef CONFIG_MACB
static void at91sam9263ek_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
*
* PHY has internal pull-down
*/
-
writel(1 << 25, &pio->pioc.pudr);
writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(1 << 25, &pio->pioc.puer);
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
pin_to_mask(AT91_PIN_PA13),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA15) |
#include <micrel.h>
#include <net.h>
#include <netdev.h>
+#include <spl.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/at91_wdt.h>
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
#include <asm/arch/atmel_usba_udc.h>
int board_early_init_f(void)
{
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ at91_periph_clk_enable(ATMEL_ID_PIOD);
+ at91_periph_clk_enable(ATMEL_ID_PIOE);
+
at91_seriald_hw_init();
return 0;
}
}
#endif /* CONFIG_ATMEL_SPI */
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+ sama5d3xek_mci_hw_init();
+#endif
+}
+
+static void ddr2_conf(struct atmel_mpddr *ddr2)
+{
+ ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+ ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+ ATMEL_MPDDRC_CR_NR_ROW_14 |
+ ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+ ATMEL_MPDDRC_CR_ENRDM_ON |
+ ATMEL_MPDDRC_CR_NB_8BANKS |
+ ATMEL_MPDDRC_CR_NDQS_DISABLED |
+ ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
+ ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+ /*
+ * As the DDR2-SDRAm device requires a refresh time is 7.8125us
+ * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks
+ */
+ ddr2->rtr = 0x411;
+
+ ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+ 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+ ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+ 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+ 28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+ 26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+ ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+ 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+ 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct atmel_mpddr ddr2;
+
+ ddr2_conf(&ddr2);
+
+ /* enable MPDDR clock */
+ at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+ writel(0x4, &pmc->scer);
+
+ /* DDRAM2 Controller initialize */
+ ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = AT91_PMC_PLLAR_29 |
+ AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+ AT91_PMC_PLLXR_MUL(43) |
+ AT91_PMC_PLLXR_DIV(1);
+ at91_plla_init(tmp);
+
+ writel(0x3 << 8, &pmc->pllicpr);
+
+ tmp = AT91_PMC_MCKR_MDIV_4 |
+ AT91_PMC_MCKR_CSS_PLLA;
+ at91_mck_init(tmp);
+}
+#endif
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <net.h>
#include <netdev.h>
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
/* Enable ethernet power */
pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0);
- /* Need to reset PHY -> 500ms reset */
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Bring the ethernet out of reset */
pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1);
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
--- /dev/null
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += usb_a9263.o
--- /dev/null
+/*
+ * (C) Copyright 2007-2013
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
+ * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm-generic/gpio.h>
+#include <asm/io.h>
+#include <net.h>
+#include <netdev.h>
+#include <dataflash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HAS_DATAFLASH
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x00001FFF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00002000, 0x00003FFF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00004000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
+};
+#endif
+
+#ifdef CONFIG_CMD_NAND
+static void usb_a9263_nand_hw_init(void)
+{
+ unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *)ATMEL_BASE_SMC0;
+ at91_matrix_t *matrix = (at91_matrix_t *)ATMEL_BASE_MATRIX;
+ at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+
+ /* Enable CS3 */
+ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa[0]);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode);
+
+ writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, &pmc->pcer);
+
+ /* Configure RDY/BSY */
+ gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy");
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
+
+ /* Enable NandFlash */
+ gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "NAND enable");
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void usb_a9263_macb_hw_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PC25) => PHY normal mode (not Test mode)
+ * ERX0 (PE25) => PHY ADDR0
+ * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal weak pull-up/pull-down
+ */
+ gpio_request(GPIO_PIN_PC(25), "PHY mode");
+ gpio_direction_input(GPIO_PIN_PC(25));
+
+ gpio_request(GPIO_PIN_PE(25), "PHY ADDR0");
+ gpio_direction_input(GPIO_PIN_PE(25));
+
+ gpio_request(GPIO_PIN_PE(26), "PHY ADDR1");
+ gpio_direction_input(GPIO_PIN_PE(26));
+
+ at91_phy_reset();
+
+ /* It will set proper pinmux for ports PC25, PE25-26 */
+ at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+ usb_a9263_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ usb_a9263_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91_uhp_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x0001);
+#endif
+ return rc;
+}
--- /dev/null
+#
+# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/
+#
+# Author: Ilya Ledvich <ilya@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += $(BOARD).o
+obj-$(CONFIG_SPL_BUILD) += mux.o spl.o
--- /dev/null
+/*
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <miiphy.h>
+#include <cpsw.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ gpmc_init();
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+#endif
+ return 0;
+}
+
+#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slave = {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = &cpsw_slave,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+/* PHY reset GPIO */
+#define GPIO_PHY_RST GPIO_PIN(3, 7)
+
+static void board_phy_init(void)
+{
+ gpio_request(GPIO_PHY_RST, "phy_rst");
+ gpio_direction_output(GPIO_PHY_RST, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PHY_RST, 1);
+ mdelay(2);
+}
+
+static void get_efuse_mac_addr(uchar *enetaddr)
+{
+ uint32_t mac_hi, mac_lo;
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ enetaddr[0] = mac_hi & 0xFF;
+ enetaddr[1] = (mac_hi & 0xFF00) >> 8;
+ enetaddr[2] = (mac_hi & 0xFF0000) >> 16;
+ enetaddr[3] = (mac_hi & 0xFF000000) >> 24;
+ enetaddr[4] = mac_lo & 0xFF;
+ enetaddr[5] = (mac_lo & 0xFF00) >> 8;
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+ uchar enetaddr[6];
+ int rv;
+
+ rv = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (rv)
+ return 0;
+
+ rv = cl_eeprom_read_mac_addr(enetaddr);
+ if (rv)
+ get_efuse_mac_addr(enetaddr);
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
+#define AR8051_PHY_DEBUG_DATA_REG 0x1e
+#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
+#define AR8051_RGMII_TX_CLK_DLY 0x100
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, n = 0;
+ const char *devname;
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ rv = handle_mac_address();
+ if (rv)
+ printf("No MAC address found!\n");
+
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
+
+ board_phy_init();
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+
+ /*
+ * CPSW RGMII Internal Delay Mode is not supported in all PVT
+ * operating points. So we must set the TX clock delay feature
+ * in the AR8051 PHY. Since we only support a single ethernet
+ * device, we only do this for the first instance.
+ */
+ devname = miiphy_get_current_dev();
+
+ miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
+ AR8051_DEBUG_RGMII_CLK_DLY_REG);
+ miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
+ AR8051_RGMII_TX_CLK_DLY);
+ return n;
+}
+#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */
--- /dev/null
+/*
+ * Pinmux configuration for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+ {-1},
+};
+
+static struct module_pin_mux uart1_pin_mux[] = {
+ {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
+ {OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux i2c1_pin_mux[] = {
+ /* I2C_DATA */
+ {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ /* I2C_SCLK */
+ {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+
+static struct module_pin_mux eth_phy_rst_pin_mux[] = {
+ {OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */
+ {-1},
+};
+
+static struct module_pin_mux status_led_pin_mux[] = {
+ {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */
+ {-1},
+};
+
+void set_uart_mux_conf(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+ configure_module_pin_mux(uart1_pin_mux);
+}
+
+void set_mux_conf_regs(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+ configure_module_pin_mux(i2c1_pin_mux);
+ configure_module_pin_mux(rgmii1_pin_mux);
+ configure_module_pin_mux(eth_phy_rst_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(nand_pin_mux);
+ configure_module_pin_mux(status_led_pin_mux);
+}
--- /dev/null
+/*
+ * SPL specific code for Compulab CM-T335 board
+ *
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clocks_am33xx.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/sizes.h>
+
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41J128MJT125_RD_DQS,
+ .datawdsratio0 = MT41J128MJT125_WR_DQS,
+ .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+ .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41J128MJT125_RATIO,
+ .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41J128MJT125_RATIO,
+ .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41J128MJT125_RATIO,
+ .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41J128MJT125_EMIF_SDCFG,
+ .ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+ .sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+ .sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+ .sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+ .zq_config = MT41J128MJT125_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+const struct dpll_params dpll_ddr = {
+/* M N M2 M3 M4 M5 M6 */
+ 303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ /* Get the frequency */
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+ /* Set MPU Frequency to what we detected now that voltages are set */
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+static void probe_sdram_size(long size)
+{
+ switch (size) {
+ case SZ_512M:
+ ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
+ break;
+ case SZ_256M:
+ ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
+ break;
+ case SZ_128M:
+ ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
+ break;
+ default:
+ puts("Failed configuring DRAM, resetting...\n\n");
+ reset_cpu(0);
+ }
+ debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
+ config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+
+void sdram_init(void)
+{
+ long size = SZ_1G;
+
+ do {
+ size = size / 2;
+ probe_sdram_size(size);
+ } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
+
+ return;
+}
--- /dev/null
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ board/compulab/cm_t335/built-in.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(4);
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += cm_t35.o leds.o
+obj-y += cm_t35.o
+++ /dev/null
-/*
- * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/gpio.h>
-
-static unsigned int leds[] = { GREEN_LED_GPIO };
-
-void __led_init(led_id_t mask, int state)
-{
- if (gpio_request(leds[mask], "") != 0) {
- printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]);
- return;
- }
-
- gpio_direction_output(leds[mask], 0);
-}
-
-void __led_set(led_id_t mask, int state)
-{
- gpio_set_value(leds[mask], state == STATUS_LED_ON);
-}
-
-void __led_toggle(led_id_t mask)
-{
- gpio_set_value(leds[mask], !gpio_get_value(leds[mask]));
-}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
#include <asm/arch/at91_spi.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include "ethernut5_pwrman.h"
/* Ready pin is optional. */
at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
#endif
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#ifdef CONFIG_MACB
static void cpu9260_macb_hw_init(void)
{
- unsigned long rstcmr;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
- rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.bss*) }
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = K4B2G1646EBIH9_RATIO,
- .cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
.cmd1csratio = K4B2G1646EBIH9_RATIO,
- .cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
.cmd2csratio = K4B2G1646EBIH9_RATIO,
- .cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
};
return &dpll_ddr;
}
+#ifdef CONFIG_REV1
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE,
.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J256M8HX15E_RATIO,
- .cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
.cmd1csratio = MT41J256M8HX15E_RATIO,
- .cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
.cmd2csratio = MT41J256M8HX15E_RATIO,
- .cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
};
PHY_EN_DYN_PWRDN,
};
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#else
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41K256M16HA125E_RATIO,
+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41K256M16HA125E_RATIO,
+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41K256M16HA125E_RATIO,
+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
enable_board_pin_mux();
}
-
-void sdram_init(void)
-{
- config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
#endif
/*
--- /dev/null
+#
+# board/renesas/koelsch/Makefile
+#
+# Copyright (C) 2013 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := koelsch.o qos.o
--- /dev/null
+/*
+ * board/renesas/koelsch/koelsch.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <i2c.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define s_init_wait(cnt) \
+ ({ \
+ u32 i = 0x10000 * cnt; \
+ while (i > 0) \
+ i--; \
+ })
+
+
+#define dbpdrgd_check(bsc) \
+ ({ \
+ while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \
+ ; \
+ })
+
+#if defined(CONFIG_NORFLASH)
+static void bsc_init(void)
+{
+ struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE;
+ struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE;
+
+ /* LBSC */
+ writel(0x00000020, &lbsc->cs0ctrl);
+ writel(0x00000020, &lbsc->cs1ctrl);
+ writel(0x00002020, &lbsc->ecs0ctrl);
+ writel(0x00002020, &lbsc->ecs1ctrl);
+
+ writel(0x077F077F, &lbsc->cswcr0);
+ writel(0x077F077F, &lbsc->cswcr1);
+ writel(0x077F077F, &lbsc->ecswcr0);
+ writel(0x077F077F, &lbsc->ecswcr1);
+
+ /* DBSC3 */
+ s_init_wait(10);
+
+ writel(0x0000A55A, &dbsc3_0->dbpdlck);
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x80000000, &dbsc3_0->dbpdrgd);
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000006, &dbsc3_0->dbpdrga);
+ writel(0x0001C000, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000023, &dbsc3_0->dbpdrga);
+ writel(0x00FD2480, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000010, &dbsc3_0->dbpdrga);
+ writel(0xF004649B, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000000F, &dbsc3_0->dbpdrga);
+ writel(0x00181EE4, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000000E, &dbsc3_0->dbpdrga);
+ writel(0x33C03812, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000003, &dbsc3_0->dbpdrga);
+ writel(0x0300C481, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000007, &dbsc3_0->dbkind);
+ writel(0x10030A02, &dbsc3_0->dbconf0);
+ writel(0x00000001, &dbsc3_0->dbphytype);
+ writel(0x00000000, &dbsc3_0->dbbl);
+ writel(0x0000000B, &dbsc3_0->dbtr0);
+ writel(0x00000008, &dbsc3_0->dbtr1);
+ writel(0x00000000, &dbsc3_0->dbtr2);
+ writel(0x0000000B, &dbsc3_0->dbtr3);
+ writel(0x000C000B, &dbsc3_0->dbtr4);
+ writel(0x00000027, &dbsc3_0->dbtr5);
+ writel(0x0000001C, &dbsc3_0->dbtr6);
+ writel(0x00000005, &dbsc3_0->dbtr7);
+ writel(0x00000018, &dbsc3_0->dbtr8);
+ writel(0x00000008, &dbsc3_0->dbtr9);
+ writel(0x0000000C, &dbsc3_0->dbtr10);
+ writel(0x00000009, &dbsc3_0->dbtr11);
+ writel(0x00000012, &dbsc3_0->dbtr12);
+ writel(0x000000D0, &dbsc3_0->dbtr13);
+ writel(0x00140005, &dbsc3_0->dbtr14);
+ writel(0x00050004, &dbsc3_0->dbtr15);
+ writel(0x70233005, &dbsc3_0->dbtr16);
+ writel(0x000C0000, &dbsc3_0->dbtr17);
+ writel(0x00000300, &dbsc3_0->dbtr18);
+ writel(0x00000040, &dbsc3_0->dbtr19);
+ writel(0x00000001, &dbsc3_0->dbrnk0);
+ writel(0x00020001, &dbsc3_0->dbadj0);
+ writel(0x20082008, &dbsc3_0->dbadj2);
+ writel(0x00020002, &dbsc3_0->dbwt0cnf0);
+ writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
+
+ writel(0x00000015, &dbsc3_0->dbpdrga);
+ writel(0x00000D70, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000016, &dbsc3_0->dbpdrga);
+ writel(0x00000006, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000017, &dbsc3_0->dbpdrga);
+ writel(0x00000018, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000012, &dbsc3_0->dbpdrga);
+ writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000013, &dbsc3_0->dbpdrga);
+ writel(0x1A868300, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000023, &dbsc3_0->dbpdrga);
+ writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000014, &dbsc3_0->dbpdrga);
+ writel(0x300214D8, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000001A, &dbsc3_0->dbpdrga);
+ writel(0x930035C7, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000060, &dbsc3_0->dbpdrga);
+ writel(0x330657B2, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000011, &dbsc3_0->dbpdrga);
+ writel(0x1000040B, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x00000071, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x2100FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+
+ writel(0x110000DB, &dbsc3_0->dbcmd);
+
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x00000181, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x0000FE01, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000000, &dbsc3_0->dbbs0cnt1);
+ writel(0x01004C20, &dbsc3_0->dbcalcnf);
+ writel(0x014000AA, &dbsc3_0->dbcaltr);
+ writel(0x00000140, &dbsc3_0->dbrfcnf0);
+ writel(0x00081860, &dbsc3_0->dbrfcnf1);
+ writel(0x00010000, &dbsc3_0->dbrfcnf2);
+ writel(0x00000001, &dbsc3_0->dbrfen);
+ writel(0x00000001, &dbsc3_0->dbacen);
+}
+#else
+#define bsc_init() do {} while (0)
+#endif /* CONFIG_NORFLASH */
+
+void s_init(void)
+{
+ struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE;
+ struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ /* QoS */
+ qos_init();
+
+ /* BSC */
+ bsc_init();
+}
+
+#define MSTPSR1 0xE6150038
+#define SMSTPCR1 0xE6150134
+#define TMU0_MSTP125 (1 << 25)
+
+#define MSTPSR7 0xE61501C4
+#define SMSTPCR7 0xE615014C
+#define SCIF0_MSTP721 (1 << 21)
+
+#define PMMR 0xE6060000
+#define GPSR4 0xE6060014
+#define IPSR14 0xE6060058
+
+#define set_guard_reg(addr, mask, value) \
+{ \
+ u32 val; \
+ val = (readl(addr) & ~(mask)) | (value); \
+ writel(~val, PMMR); \
+ writel(val, addr); \
+}
+
+#define mstp_setbits(type, addr, saddr, set) \
+ out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+ out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+ mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear) \
+ mstp_clrbits(le32, addr, saddr, clear)
+
+int board_early_init_f(void)
+{
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+#if defined(CONFIG_NORFLASH)
+ /* SCIF0 */
+ set_guard_reg(GPSR4, 0x34000000, 0x00000000);
+ set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
+ set_guard_reg(GPSR4, 0x00000000, 0x34000000);
+#endif
+
+ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7791_pinmux_init();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
--- /dev/null
+/*
+ * board/renesas/koelsch/qos.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+/* QoS version 0.23 */
+
+enum {
+ DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+ DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+ DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+ DBSC3_15,
+ DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+static u32 dbsc3_1_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_1_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_1_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_1_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_1_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_1_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_1_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_1_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_1_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_1_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_1_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_1_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_1_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_1_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_1_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_1_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_1_QOS_R15_BASE,
+};
+
+static u32 dbsc3_1_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_1_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_1_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_1_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_1_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_1_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_1_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_1_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_1_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_1_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_1_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_1_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_1_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_1_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_1_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_1_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_1_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+ int i;
+ struct r8a7791_s3c *s3c;
+ struct r8a7791_s3c_qos *s3c_qos;
+ struct r8a7791_dbsc3_qos *qos_addr;
+ struct r8a7791_mxi *mxi;
+ struct r8a7791_mxi_qos *mxi_qos;
+ struct r8a7791_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct r8a7791_s3c *)S3C_BASE;
+ writel(0x00FF1B1D, &s3c->s3cadsplcr);
+ writel(0x1F0D0C0C, &s3c->s3crorr);
+ writel(0x1F0D0C0A, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20DC, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20DC, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_AXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20FA, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20FA, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00001FB0, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x00001FE7, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x000020EB, &qos_addr->dbtmval0);
+ writel(0x0000206E, &qos_addr->dbtmval1);
+ writel(0x00002050, &qos_addr->dbtmval2);
+ writel(0x0000203A, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000205A, &qos_addr->dbthres1);
+ writel(0x0000203C, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC1 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00001FB0, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x00001FE7, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC1 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x000020EB, &qos_addr->dbtmval0);
+ writel(0x0000206E, &qos_addr->dbtmval1);
+ writel(0x00002050, &qos_addr->dbtmval2);
+ writel(0x0000203A, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000205A, &qos_addr->dbthres1);
+ writel(0x0000203C, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* CCI-400 -QoS */
+ writel(0x20001000, CCI_400_MAXOT_1);
+ writel(0x20001000, CCI_400_MAXOT_2);
+ writel(0x0000000C, CCI_400_QOSCNTL_1);
+ writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct r8a7791_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00780080, &mxi->mxsaar0);
+ writel(0x02000800, &mxi->mxsaar1);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct r8a7791_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000C, &mxi_qos->vspdu1);
+ writel(0x0000000D, &mxi_qos->du0);
+ writel(0x0000000D, &mxi_qos->du1);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_G2D_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_PCI_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB21_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB30_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AX2M_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CC50_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CCI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_DDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_ETH_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MPXM_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_TRAB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_DBG_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002299, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_STPRO_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SY2RT_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000206E, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXR_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXW_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
--- /dev/null
+#
+# board/renesas/lager/Makefile
+#
+# Copyright (C) 2013 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := lager.o qos.o
--- /dev/null
+/*
+ * board/renesas/lager/lager.c
+ * This file is lager board support.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define s_init_wait(cnt) \
+ ({ \
+ u32 i = 0x10000 * cnt; \
+ while (i > 0) \
+ i--; \
+ })
+
+#define dbpdrgd_check(bsc) \
+ ({ \
+ while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \
+ ; \
+ })
+
+#if defined(CONFIG_NORFLASH)
+static void bsc_init(void)
+{
+ struct r8a7790_lbsc *lbsc = (struct r8a7790_lbsc *)LBSC_BASE;
+ struct r8a7790_dbsc3 *dbsc3_0 = (struct r8a7790_dbsc3 *)DBSC3_0_BASE;
+
+ /* LBSC */
+ writel(0x00000020, &lbsc->cs0ctrl);
+ writel(0x00000020, &lbsc->cs1ctrl);
+ writel(0x00002020, &lbsc->ecs0ctrl);
+ writel(0x00002020, &lbsc->ecs1ctrl);
+
+ writel(0x077F077F, &lbsc->cswcr0);
+ writel(0x077F077F, &lbsc->cswcr1);
+ writel(0x077F077F, &lbsc->ecswcr0);
+ writel(0x077F077F, &lbsc->ecswcr1);
+
+ /* DBSC3 */
+ s_init_wait(10);
+
+ writel(0x0000A55A, &dbsc3_0->dbpdlck);
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x80000000, &dbsc3_0->dbpdrgd);
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000006, &dbsc3_0->dbpdrga);
+ writel(0x0001C000, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000023, &dbsc3_0->dbpdrga);
+ writel(0x00FD2480, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000010, &dbsc3_0->dbpdrga);
+ writel(0xF004649B, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000000F, &dbsc3_0->dbpdrga);
+ writel(0x00181EE4, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000000E, &dbsc3_0->dbpdrga);
+ writel(0x33C03812, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000003, &dbsc3_0->dbpdrga);
+ writel(0x0300C481, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000007, &dbsc3_0->dbkind);
+ writel(0x10030A02, &dbsc3_0->dbconf0);
+ writel(0x00000001, &dbsc3_0->dbphytype);
+ writel(0x00000000, &dbsc3_0->dbbl);
+ writel(0x0000000B, &dbsc3_0->dbtr0);
+ writel(0x00000008, &dbsc3_0->dbtr1);
+ writel(0x00000000, &dbsc3_0->dbtr2);
+ writel(0x0000000B, &dbsc3_0->dbtr3);
+ writel(0x000C000B, &dbsc3_0->dbtr4);
+ writel(0x00000027, &dbsc3_0->dbtr5);
+ writel(0x0000001C, &dbsc3_0->dbtr6);
+ writel(0x00000005, &dbsc3_0->dbtr7);
+ writel(0x00000018, &dbsc3_0->dbtr8);
+ writel(0x00000008, &dbsc3_0->dbtr9);
+ writel(0x0000000C, &dbsc3_0->dbtr10);
+ writel(0x00000009, &dbsc3_0->dbtr11);
+ writel(0x00000012, &dbsc3_0->dbtr12);
+ writel(0x000000D0, &dbsc3_0->dbtr13);
+ writel(0x00140005, &dbsc3_0->dbtr14);
+ writel(0x00050004, &dbsc3_0->dbtr15);
+ writel(0x70233005, &dbsc3_0->dbtr16);
+ writel(0x000C0000, &dbsc3_0->dbtr17);
+ writel(0x00000300, &dbsc3_0->dbtr18);
+ writel(0x00000040, &dbsc3_0->dbtr19);
+ writel(0x00000001, &dbsc3_0->dbrnk0);
+ writel(0x00020001, &dbsc3_0->dbadj0);
+ writel(0x20082008, &dbsc3_0->dbadj2);
+ writel(0x00020002, &dbsc3_0->dbwt0cnf0);
+ writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
+
+ writel(0x00000015, &dbsc3_0->dbpdrga);
+ writel(0x00000D70, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000016, &dbsc3_0->dbpdrga);
+ writel(0x00000006, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000017, &dbsc3_0->dbpdrga);
+ writel(0x00000018, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000012, &dbsc3_0->dbpdrga);
+ writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000013, &dbsc3_0->dbpdrga);
+ writel(0x1A868300, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000023, &dbsc3_0->dbpdrga);
+ writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000014, &dbsc3_0->dbpdrga);
+ writel(0x300214D8, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000001A, &dbsc3_0->dbpdrga);
+ writel(0x930035C7, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000060, &dbsc3_0->dbpdrga);
+ writel(0x330657B2, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000011, &dbsc3_0->dbpdrga);
+ writel(0x1000040B, &dbsc3_0->dbpdrgd);
+
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x00000071, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x2100FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+ writel(0x0000FA00, &dbsc3_0->dbcmd);
+
+ writel(0x110000DB, &dbsc3_0->dbcmd);
+
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x00000181, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000001, &dbsc3_0->dbpdrga);
+ writel(0x0000FE01, &dbsc3_0->dbpdrgd);
+
+ writel(0x00000004, &dbsc3_0->dbpdrga);
+ dbpdrgd_check(dbsc3_0);
+
+ writel(0x00000000, &dbsc3_0->dbbs0cnt1);
+ writel(0x01004C20, &dbsc3_0->dbcalcnf);
+ writel(0x014000AA, &dbsc3_0->dbcaltr);
+ writel(0x00000140, &dbsc3_0->dbrfcnf0);
+ writel(0x00081860, &dbsc3_0->dbrfcnf1);
+ writel(0x00010000, &dbsc3_0->dbrfcnf2);
+ writel(0x00000001, &dbsc3_0->dbrfen);
+ writel(0x00000001, &dbsc3_0->dbacen);
+}
+#else
+#define bsc_init() do {} while (0)
+#endif /* CONFIG_NORFLASH */
+
+void s_init(void)
+{
+ struct r8a7790_rwdt *rwdt = (struct r8a7790_rwdt *)RWDT_BASE;
+ struct r8a7790_swdt *swdt = (struct r8a7790_swdt *)SWDT_BASE;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ /* QoS(Quality-of-Service) Init */
+ qos_init();
+
+ /* BSC init */
+ bsc_init();
+}
+
+#define MSTPSR1 0xE6150038
+#define SMSTPCR1 0xE6150134
+#define TMU0_MSTP125 (1 << 25)
+
+#define MSTPSR7 0xE61501C4
+#define SMSTPCR7 0xE615014C
+#define SCIF0_MSTP721 (1 << 21)
+
+#define PMMR 0xE6060000
+#define GPSR4 0xE6060014
+#define IPSR14 0xE6060058
+
+#define set_guard_reg(addr, mask, value) \
+{ \
+ u32 val; \
+ val = (readl(addr) & ~(mask)) | (value); \
+ writel(~val, PMMR); \
+ writel(val, addr); \
+}
+
+#define mstp_setbits(type, addr, saddr, set) \
+ out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+ out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+ mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear) \
+ mstp_clrbits(le32, addr, saddr, clear)
+
+int board_early_init_f(void)
+{
+ /* TMU0 */
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+#if defined(CONFIG_NORFLASH)
+ /* SCIF0 */
+ set_guard_reg(GPSR4, 0x34000000, 0x00000000);
+ set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
+ set_guard_reg(GPSR4, 0x00000000, 0x34000000);
+#endif
+
+ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+ return 0;
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+int board_init(void)
+{
+ /* board id for linux */
+ gd->bd->bi_arch_number = MACH_TYPE_LAGER;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7790_pinmux_init();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = LAGER_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = LAGER_SDRAM_SIZE;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
--- /dev/null
+/*
+ * board/renesas/lager/qos.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+/* QoS version 0.954 */
+
+enum {
+ DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04,
+ DBSC3_R05, DBSC3_R06, DBSC3_R07, DBSC3_R08, DBSC3_R09,
+ DBSC3_R10, DBSC3_R11, DBSC3_R12, DBSC3_R13, DBSC3_R14,
+ DBSC3_R15,
+ DBSC3_W00, DBSC3_W01, DBSC3_W02, DBSC3_W03, DBSC3_W04,
+ DBSC3_W05, DBSC3_W06, DBSC3_W07, DBSC3_W08, DBSC3_W09,
+ DBSC3_W10, DBSC3_W11, DBSC3_W12, DBSC3_W13, DBSC3_W14,
+ DBSC3_W15,
+ DBSC3_NR,
+};
+
+static const u32 dbsc3_qos_addr[DBSC3_NR] = {
+ [DBSC3_R00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_R01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_R02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_R03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_R04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_R05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_R06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_R07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_R08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_R09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_R10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_R11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_R12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_R13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_R14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_R15] = DBSC3_0_QOS_R15_BASE,
+ [DBSC3_W00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_W01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_W02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_W03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_W04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_W05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_W06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_W07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_W08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_W09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_W10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_W11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_W12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_W13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_W14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_W15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+ int i;
+ struct r8a7790_s3c *s3c;
+ struct r8a7790_s3c_qos *s3c_qos;
+ struct r8a7790_dbsc3_qos *qos_addr;
+ struct r8a7790_mxi *mxi;
+ struct r8a7790_mxi_qos *mxi_qos;
+ struct r8a7790_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct r8a7790_s3c *)S3C_BASE;
+ writel(0x80FF1C1E, &s3c->s3cadsplcr);
+ writel(0x1F060505, &s3c->s3crorr);
+ writel(0x1F020100, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00800080, &s3c_qos->s3cqos0);
+ writel(0x22000010, &s3c_qos->s3cqos1);
+ writel(0x22002200, &s3c_qos->s3cqos2);
+ writel(0x2F002200, &s3c_qos->s3cqos3);
+ writel(0x2F002F00, &s3c_qos->s3cqos4);
+ writel(0x22000010, &s3c_qos->s3cqos5);
+ writel(0x22002200, &s3c_qos->s3cqos6);
+ writel(0x2F002200, &s3c_qos->s3cqos7);
+ writel(0x2F002F00, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00800080, &s3c_qos->s3cqos0);
+ writel(0x22000010, &s3c_qos->s3cqos1);
+ writel(0x22002200, &s3c_qos->s3cqos2);
+ writel(0x2F002200, &s3c_qos->s3cqos3);
+ writel(0x2F002F00, &s3c_qos->s3cqos4);
+ writel(0x22000010, &s3c_qos->s3cqos5);
+ writel(0x22002200, &s3c_qos->s3cqos6);
+ writel(0x2F002200, &s3c_qos->s3cqos7);
+ writel(0x2F002F00, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x80918099, &s3c_qos->s3cqos0);
+ writel(0x20410010, &s3c_qos->s3cqos1);
+ writel(0x200A2023, &s3c_qos->s3cqos2);
+ writel(0x20502001, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20410FFF, &s3c_qos->s3cqos5);
+ writel(0x200A2023, &s3c_qos->s3cqos6);
+ writel(0x20502001, &s3c_qos->s3cqos7);
+ writel(0x20142032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_AXI_BASE;
+
+ writel(0x00810089, &s3c_qos->s3cqos0);
+ writel(0x20410001, &s3c_qos->s3cqos1);
+ writel(0x200A2023, &s3c_qos->s3cqos2);
+ writel(0x20502001, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20410FFF, &s3c_qos->s3cqos5);
+ writel(0x200A2023, &s3c_qos->s3cqos6);
+ writel(0x20502001, &s3c_qos->s3cqos7);
+ writel(0x20142032, &s3c_qos->s3cqos8);
+
+ writel(0x00200808, &s3c->s3carcr11);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read/Write */
+ for (i = DBSC3_R00; i < DBSC3_NR; i++) {
+ qos_addr = (struct r8a7790_dbsc3_qos *)dbsc3_qos_addr[i];
+ writel(0x00000203, &qos_addr->dblgcnt);
+ writel(0x00002064, &qos_addr->dbtmval0);
+ writel(0x00002048, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00002019, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002019, &qos_addr->dbthres0);
+ writel(0x00002019, &qos_addr->dbthres1);
+ writel(0x00002019, &qos_addr->dbthres2);
+ writel(0x00000000, &qos_addr->dblgqon);
+ }
+ /* CCI-400 -QoS */
+ writel(0x20001000, CCI_400_MAXOT_1);
+ writel(0x20001000, CCI_400_MAXOT_2);
+ writel(0x0000000C, CCI_400_QOSCNTL_1);
+ writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct r8a7790_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00B800C0, &mxi->mxsaar0);
+ writel(0x02000800, &mxi->mxsaar1);
+ writel(0x00200000, &mxi->mxs3cracr);
+ writel(0x00200000, &mxi->mxs3cwacr);
+ writel(0x00200000, &mxi->mxaxiracr);
+ writel(0x00200000, &mxi->mxaxiwacr);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct r8a7790_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000C, &mxi_qos->vspdu1);
+ writel(0x0000000D, &mxi_qos->du0);
+ writel(0x0000000D, &mxi_qos->du1);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200A, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_G2D_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200A, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002002, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002002, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002002, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_PCI_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200A, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200A, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002005, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB21_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002005, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002005, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB30_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct r8a7790_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002005, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RDS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)RT_AXI_STPRO_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002003, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002002, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200D, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x0000200F, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002001, &axi_qos->qosctset0);
+ writel(0x00002009, &axi_qos->qosctset1);
+ writel(0x00002003, &axi_qos->qosctset2);
+ writel(0x00002003, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002018, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1R_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1W_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000200C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002007, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002006, &axi_qos->qosthres0);
+ writel(0x00002001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000000, &axi_qos->qosqon);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
*/
#include <common.h>
+#include <asm/gpio.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/io.h>
void coloured_LED_init(void)
{
/* Enable clock */
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
- at91_set_pio_output(CONFIG_RED_LED, 1);
- at91_set_pio_output(CONFIG_GREEN_LED, 1);
- at91_set_pio_output(CONFIG_YELLOW_LED, 1);
+ gpio_direction_output(CONFIG_RED_LED, 1);
+ gpio_direction_output(CONFIG_GREEN_LED, 1);
+ gpio_direction_output(CONFIG_YELLOW_LED, 1);
- at91_set_pio_value(CONFIG_RED_LED, 0);
- at91_set_pio_value(CONFIG_GREEN_LED, 1);
- at91_set_pio_value(CONFIG_YELLOW_LED, 1);
+ gpio_set_value(CONFIG_RED_LED, 0);
+ gpio_set_value(CONFIG_GREEN_LED, 1);
+ gpio_set_value(CONFIG_YELLOW_LED, 1);
}
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
&pmc->pcer);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */
*/
#include <common.h>
+#include <asm/gpio.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/io.h>
void coloured_LED_init(void)
{
/* Enable clock */
writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
- at91_set_pio_output(CONFIG_RED_LED, 1);
- at91_set_pio_output(CONFIG_GREEN_LED, 1);
+ gpio_direction_output(CONFIG_RED_LED, 1);
+ gpio_direction_output(CONFIG_GREEN_LED, 1);
- at91_set_pio_value(CONFIG_RED_LED, 0);
- at91_set_pio_value(CONFIG_GREEN_LED, 1);
+ gpio_set_value(CONFIG_RED_LED, 0);
+ gpio_set_value(CONFIG_GREEN_LED, 1);
}
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#ifdef CONFIG_SYS_NAND_READY_PIN
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
#endif
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
debug("USB_udc_probe\n");
return s3c_udc_probe(&s5pc210_otg_data);
}
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+ struct pmic *muic = pmic_get("MAX8997_MUIC");
+ if (!muic)
+ return 0;
+
+ return !!muic->chrg->chrg_type(muic);
+}
+#endif
#endif
static void pmic_reset(void)
#include <power/max77693_fg.h>
#include <libtizen.h>
#include <errno.h>
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
int modelrev = 0;
int i;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/*
* GPM1[1:0]: MODEL_REV[1:0]
static void board_external_gpio_init(void)
{
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/*
* some pins which in alive block are connected with external pull-up
#ifdef CONFIG_SYS_I2C_INIT_BOARD
static void board_init_i2c(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/* I2C_7 */
s5p_gpio_direction_output(&gpio1->d0, 2, 1);
int board_init(void)
{
struct exynos4_power *pwr =
- (struct exynos4_power *)EXYNOS4X12_POWER_BASE;
+ (struct exynos4_power *)samsung_get_base_power();
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
{
int err0, err2 = 0;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
s5p_gpio_direction_output(&gpio2->k0, 2, 1);
return err0 & err2;
}
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret = 0;
+ unsigned int val;
+ struct pmic *p, *p_pmic, *p_muic;
+
+ p_pmic = pmic_get("MAX77686_PMIC");
+ if (!p_pmic)
+ return -ENODEV;
+
+ if (pmic_probe(p_pmic))
+ return -1;
+
+ p_muic = pmic_get("MAX77693_MUIC");
+ if (!p_muic)
+ return -ENODEV;
+
+ if (pmic_probe(p_muic))
+ return -1;
+
+ if (on) {
+ ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+ if (ret)
+ return -1;
+
+ p = pmic_get("MAX77693_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ /* SAFEOUT */
+ ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
+ if (ret)
+ return -1;
+
+ val |= MAX77693_ENSAFEOUT1;
+ ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
+ if (ret)
+ return -1;
+
+ /* PATH: USB */
+ ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+ MAX77693_MUIC_CTRL1_DN1DP2);
+
+ } else {
+ ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+ if (ret)
+ return -1;
+
+ /* PATH: UART */
+ ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+ MAX77693_MUIC_CTRL1_UT1UR2);
+ }
+
+ if (ret)
+ return -1;
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4X12_USBPHY_BASE,
+ .regs_otg = EXYNOS4X12_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return s3c_udc_probe(&s5pc210_otg_data);
+}
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+ struct pmic *muic = pmic_get("MAX77693_MUIC");
+ if (!muic)
+ return 0;
+
+ return !!muic->chrg->chrg_type(muic);
+}
+#endif
+#endif
+
static int pmic_init_max77686(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
{
struct pmic *p = pmic_get("MAX77686_PMIC");
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
/* LCD_2.2V_EN: GPC0[1] */
s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
void exynos_reset_lcd(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
/* reset lcd */
s5p_gpio_direction_output(&gpio1->f2, 1, 0);
#include <asm/arch/sys_proto.h>
#include <asm/unaligned.h>
#include <net.h>
-#include <usbdescriptors.h>
+#include <errno.h>
+#include <g_dnl.h>
#include "factoryset.h"
#define EEPR_PG_SZ 0x80
MAX_STRING_LENGTH)) {
debug("display name: %s\n", factory_dat.disp_name);
}
-
#endif
+ if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+ (uchar *)"num", factory_dat.serial,
+ MAX_STRING_LENGTH)) {
+ debug("serial number: %s\n", factory_dat.serial);
+ }
+ if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+ (uchar *)"ver", buf,
+ MAX_STRING_LENGTH)) {
+ factory_dat.version = simple_strtoul((char *)buf,
+ NULL, 16);
+ debug("version number: %d\n", factory_dat.version);
+ }
+
return 0;
err:
{
put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
+ g_dnl_set_serialnumber((char *)factory_dat.serial);
+
return 0;
}
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+ return factory_dat.version;
+}
#endif /* defined(CONFIG_SPL_BUILD) */
#if defined(CONFIG_VIDEO)
unsigned char disp_name[MAX_STRING_LENGTH];
#endif
+ unsigned char serial[MAX_STRING_LENGTH];
+ int version;
};
int factoryset_read_eeprom(int i2c_addr);
--- /dev/null
+#
+# Makefile for siemens CORVUS (AT91SAM9G45) based board
+# (C) Copyright 2013 Siemens AG
+#
+# Based on:
+# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
--- /dev/null
+/*
+ * Board functions for Siemens CORVUS (AT91SAM9G45) based board
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9g45_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void corvus_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void taurus_usb_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
+
+ at91_set_gpio_output(AT91_PIN_PD1, 0);
+ at91_set_gpio_output(AT91_PIN_PD3, 0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void corvus_macb_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PA15) => PHY normal mode (not Test mode)
+ * ERX0 (PA12) => PHY ADDR0
+ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+
+ at91_phy_reset();
+
+ /* Re-enable pull-up */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+
+ /* And the pins. */
+ at91_macb_hw_init();
+}
+#endif
+
+int board_early_init_f(void)
+{
+ at91_seriald_hw_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+ corvus_nand_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI
+ at91_spi0_hw_init(1 << 4);
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ corvus_macb_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ taurus_usb_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
+
+/* SPI chip select control */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 1:
+ at91_set_gpio_output(AT91_PIN_PB18, 0);
+ break;
+ case 0:
+ default:
+ at91_set_gpio_output(AT91_PIN_PB3, 0);
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 1:
+ at91_set_gpio_output(AT91_PIN_PB18, 1);
+ break;
+ case 0:
+ default:
+ at91_set_gpio_output(AT91_PIN_PB3, 1);
+ break;
+ }
+}
#ifdef CONFIG_SPL_BUILD
static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
-
+/* @303MHz-i0 */
const struct ddr3_data ddr3_default = {
- 0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B,
- 0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2,
- 0x00000618,
+ 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4,
+ 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x00000618, 0x0000014A,
};
static void set_default_ddr3_timings(void)
PRINTARGS(sdram_config);
PRINTARGS(ref_ctrl);
+ PRINTARGS(ioctr_val);
}
static void print_chip_data(void)
};
struct ddr_data dxr2_ddr3_data = {
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
- .cmd0dldiff = 0,
- .cmd1dldiff = 0,
- .cmd2dldiff = 0,
};
/* pass values from eeprom */
dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
- config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data,
+ config_ddr(DDR_PLL_FREQ, settings.ddr3.ioctr_val, &dxr2_ddr3_data,
&dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0);
}
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
-/* Wed, 19 Jun 2013 10:57:48 +0200 */
-/* From file: draco/ddr3-data-micron.txt */
+/* Wed, 18 Sep 2013 18:58:27 +0200 */
+/* From file: draco/ddr3-data-micron-v2.txt */
struct ddr3_data {
unsigned int magic; /* 0x33524444 */
- unsigned int version; /* 0x56312e33 */
+ unsigned int version; /* 0x56312e34 */
unsigned short int ddr3_sratio; /* 0x0100 */
unsigned short int iclkout; /* 0x0001 */
unsigned short int dt0rdsratio0; /* 0x003A */
unsigned int sdram_tim1; /* 0x0888A39B */
unsigned int sdram_tim2; /* 0x26247FDA */
unsigned int sdram_tim3; /* 0x501F821F */
- unsigned short int emif_ddr_phy_ctlr_1; /* 0x0006 */
+ unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */
unsigned int sdram_config; /* 0x61C04AB2 */
unsigned int ref_ctrl; /* 0x00000618 */
+ unsigned int ioctr_val; /* 0x0000018B */
};
struct chip_data {
{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
{OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */
{OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */
+ /* Triacs in HW Rev 2 */
+ {OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y5 GPIO0_12*/
+ {OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/
+ {OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/
+ /* Triacs initial HW Rev */
+ {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */
+ {OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */
+ {OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */
+ {OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */
+ {OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_10 Y4 */
+ {OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS}, /* 2_1 Y5 */
+ {OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 3_8 Y6 */
+ {OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_15 Y7 */
+ /* Remaining pins that were not used in this file */
+ {OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
{-1},
};
.datawdsratio0 = 0,
.datafwsratio0 = 0x8020080,
.datawrsratio0 = 0x4010040,
- .datauserank0delay = 1,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0,
.cmd0iclkout = 0,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0,
.cmd1iclkout = 0,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0,
.cmd2iclkout = 0,
};
static int board_video_init(void)
{
- /* set 300 MHz */
- conf_disp_pll(25, 2);
+ conf_disp_pll(24, 1);
if (factory_dat.pxm50)
da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp);
else
.datawdsratio0 = 0x85,
.datafwsratio0 = 0x100,
.datawrsratio0 = 0xc1,
- .datauserank0delay = 1,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control rut_ddr3_cmd_ctrl_data = {
.cmd0csratio = 0x40,
- .cmd0dldiff = 0,
.cmd0iclkout = 1,
.cmd1csratio = 0x40,
- .cmd1dldiff = 0,
.cmd1iclkout = 1,
.cmd2csratio = 0x40,
- .cmd2dldiff = 0,
.cmd2iclkout = 1,
};
&rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
}
+static int request_and_pulse_reset(int gpio, const char *name)
+{
+ int ret;
+ const int delay_us = 2000; /* 2ms */
+
+ ret = gpio_request(gpio, name);
+ if (ret < 0) {
+ printf("%s: Unable to request %s\n", __func__, name);
+ goto err;
+ }
+
+ ret = gpio_direction_output(gpio, 0);
+ if (ret < 0) {
+ printf("%s: Unable to set %s as output\n", __func__, name);
+ goto err_free_gpio;
+ }
+
+ udelay(delay_us);
+
+ gpio_set_value(gpio, 1);
+
+ return 0;
+
+err_free_gpio:
+ gpio_free(gpio);
+err:
+ return ret;
+}
+
+#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio))
+#define ETH_PHY_RESET_GPIO GPIO_TO_PIN(2, 18)
+#define MAXTOUCH_RESET_GPIO GPIO_TO_PIN(3, 18)
+#define DISPLAY_RESET_GPIO GPIO_TO_PIN(3, 19)
+
+#define REQUEST_AND_PULSE_RESET(N) \
+ request_and_pulse_reset(N, #N);
+
static void spl_siemens_board_init(void)
{
- return;
+ REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
+ REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
+ REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO);
}
#endif /* if def CONFIG_SPL_BUILD */
static int conf_disp_pll(int m, int n)
{
struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
- struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1};
#if defined(DISPL_PLL_SPREAD_SPECTRUM)
struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
0
};
do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
- /* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */
- writel(0x0, &cmdpll->clklcdcpixelclk);
do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
{
unsigned char buf[1];
+ set_gpio(BOARD_LCD_RESET, 0);
+ mdelay(1);
set_gpio(BOARD_LCD_RESET, 1);
+ mdelay(1);
/* spi lcd init */
- kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3);
+ kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
/* backlight on */
buf[0] = 0xf;
printf("%s: %s not found, using default %s\n", __func__,
factory_dat.disp_name, lcd_panels[i].name);
}
- conf_disp_pll(25, 2);
+ conf_disp_pll(24, 1);
da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display],
lcd_cfgs[display].bpp);
--- /dev/null
+#
+# Makefile for Siemens TAURUS (AT91SAM9G20) based board
+# (C) Copyright 2013 Siemens AG
+#
+# Based on:
+# U-Boot file: board/atmel/at91sam9260ek/Makefile
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += taurus.o
--- /dev/null
+/*
+ * Board functions for Siemens TAURUS (AT91SAM9G20) based boards
+ * (C) Copyright Siemens AG
+ *
+ * Based on:
+ * U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <atmel_mci.h>
+
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void taurus_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ unsigned long csa;
+
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void taurus_macb_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable EMAC clock */
+ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PA17) => PHY normal mode (not Test mode)
+ * ERX0 (PA14) => PHY ADDR0
+ * ERX1 (PA15) => PHY ADDR1
+ * ERX2 (PA25) => PHY ADDR2
+ * ERX3 (PA26) => PHY ADDR3
+ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
+
+ at91_phy_reset();
+
+ at91_set_gpio_input(AT91_PIN_PA25, 1); /* ERST tri-state */
+
+ /* Re-enable pull-up */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1);
+
+ /* Initialize EMAC=MACB hardware */
+ at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_MCI);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOC),
+ &pmc->pcer);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ at91_seriald_hw_init();
+#ifdef CONFIG_CMD_NAND
+ taurus_nand_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ taurus_macb_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
+#endif
+ return rc;
+}
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <watchdog.h>
static void stamp9G20_macb_hw_init(void)
{
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */
at91_set_gpio_output(AT91_PIN_PA26, 0);
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) &
- ~AT91_RSTC_MR_URSTEN), &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end of hardware reset */
- unsigned long start = get_timer(0);
- unsigned long timeout = 1000; /* 1000ms */
-
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
-
- /* avoid shutdown by watchdog */
- WATCHDOG_RESET();
- mdelay(10);
-
- /* timeout for not getting stuck in an endless loop */
- if (get_timer(start) >= timeout) {
- puts("*** ERROR: Timeout waiting for PHY reset!\n");
- break;
- };
- };
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
(MT47H128M16RT25E_PHY_WR_DATA<<20) |
(MT47H128M16RT25E_PHY_WR_DATA<<10) |
(MT47H128M16RT25E_PHY_WR_DATA<<0)),
- .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr2_cmd_ctrl_data = {
.cmd0csratio = MT47H128M16RT25E_RATIO,
- .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd1csratio = MT47H128M16RT25E_RATIO,
- .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd2csratio = MT47H128M16RT25E_RATIO,
- .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
};
.datawdsratio0 = MT41J128MJT125_WR_DQS,
.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_beagleblack_data = {
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_evm_data = {
.datawdsratio0 = MT41J512M8RH125_WR_DQS,
.datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE,
.datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J128MJT125_RATIO,
- .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd1csratio = MT41J128MJT125_RATIO,
- .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd2csratio = MT41J128MJT125_RATIO,
- .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
.cmd0csratio = MT41K256M16HA125E_RATIO,
- .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd1csratio = MT41K256M16HA125E_RATIO,
- .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd2csratio = MT41K256M16HA125E_RATIO,
- .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
.cmd0csratio = MT41J512M8RH125_RATIO,
- .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd1csratio = MT41J512M8RH125_RATIO,
- .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd2csratio = MT41J512M8RH125_RATIO,
- .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT,
};
KEEP(*(.__bss_end));
}
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
#include "mux_data.h"
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
+#include <asm/arch/sata.h>
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
int board_eth_init(bd_t *bis)
{
return 0;
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := omap730p2.o flash.o
-obj-y += lowlevel_init.o
+++ /dev/null
-
- u-boot for the TI OMAP730 Perseus2
-
- Dave Peverley, MPC-Data Limited
- http://www.mpc-data.co.uk
-
-
-Overview :
-
- As the OMAP730 is similar to the OMAP1610 in many ways, this port was based
-on the u-boot port to the OMAP1610 Innovator. Supported features are :
-
- - Serial terminal support
- - Onboard NOR Flash
- - Ethernet via the seperate debug board
- - Tested on Rev4 and Rev5 boards
-
- It has also been tested to work correctly when built with a 'standard' GCC
-3.2.1 cross-compiler as well as Montavista Linux CEE 3.1's toolchain.
-
-
-Hardware Configuration :
-
- The main dips on the P2 board should be set to 2,3,7 and 9 on with all
-others off. On the debug board, dips 1 and 7 should be on with the rest off.
-The serial console has been set up to run from the DB9 connector on the
-P2 board at 115200 baud, 8 data bits, no stop bits, 1 parity bit.
-
- It should be noted that the P2 board has NOR flash that is addressable via
-either CS0 or CS3. This mode can be changed via DIP9 on the P2 board.
-
-
-Installing u-boot for the P2 :
-
- You can simply build u-boot for the Perseus by following the instructions
-in the main readme file. The target configuration is "omap730p2_config".
-Once u-boot has been built, you should strip the executable so it can be
-loaded via CCS (which cant cope with the symbols in the ELF binary) :
- $ cp u-boot u-boot.out
- $ arm-linux-strip u-boot.out
-
- The method we've used for installing u-boot the first time on a P2 is
-as follows :
-
-1) Configure TI Code Composer Studio to connect to the P2 board via JTAG
- as described in the Users Guide.
-
-2) Set up the P2 to boot from CS3, and connect with CCS. Reset the CPU
- and run the "init_mmu" GEL script.
-
-3) Use the "Load Program" option to send the u-boot.out file to the P2 and
- run.
-
- At this point, u-boot should run and you will see the boot menu on your
-serial terminal. You can then load the u-boot image to memory :
-
- # loadb 0x10000000
-
- Send the "u-boot.bin" binary via the serial using Kermit. Once loaded
-you can self-flash u-boot :
-
- # protect off 1:0
- # erase 1:0
- # cp.b 0x10000000 0x0 0x20000
-
- You should now be able to reset the board and run u-boot from flash.
-
-
-Alternative flash option :
-
- Sometimes, if you've been silly, you can get the board into a state where
-whats in flash has upset the board so much that you can no longer connect
-to the P2 via JTAG. However, you can set DIP9 to off to swap the boot mode
-of the P2 so that you boot from RAM instead of NOR flash. This moves NOR
-flash up to 0x0C000000. You can build a special version of u-boot to
-utilise this by the following config :
-
- $ make omap730p2_cs0boot_config
-
- If you load this up via CCS it will detect flash at its alternate location
-and allow you to programme your u-boot image (which, remember must be built
-for CS3 boot!) Once you do this, you can revert to CS3 boot and it will work
-fine again.
-
-
-Errata :
-
-1) It's been observed that sometimes the tftp transfer of kernels to the
- board can have checksum errors or stall. This appears to be an issue
- with the lan91c96.c driver, and can normally be worked around by
- resetting the board and trying again.
+++ /dev/null
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Perseus 2 board with OMAP720 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256L18T[] = {
- {4, 32 * 1024}, /* 4 * 32kBytes sectors */
- {255, 128 * 1024}, /* 255 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- if (i > 255) {
- info->start[i] = base + (i * 0x8000);
- info->protect[i] = 0;
- } else {
- info->start[i] = base +
- (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F256L18T:
- printf ("FLASH 28F256L18T\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
- switch (value) {
-
- case (FPW) (INTEL_ID_28F256L18T):
- info->flash_id += FLASH_28F256L18T;
- info->sector_count = 259;
- info->size = 0x02000000;
- break; /* => 32 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK 0x0080
-
- *addr = (FPW) 0x00500050; /* clear status register */
-
- /* this sends the clear lock bit command */
- *addr = (FPW) 0x00600060;
- *addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- flash_unprotect_sectors (addr);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- *addr = (FPW) 0x00500050;/* clear status register */
- *addr = (FPW) 0x00200020;/* erase setup */
- *addr = (FPW) 0x00D000D0;/* erase confirm */
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- /* reset to read mode */
- *addr = (FPW) 0x00FF00FF;
- rcode = 1;
- break;
- }
- }
-
- /* clear status register cmd. */
- *addr = (FPW) 0x00500050;
- *addr = (FPW) 0x00FF00FF;/* resest to read mode */
- printf (" done\n");
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag, rc = 0;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- flash_unprotect_sectors (addr);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = 1;
- goto done;
- }
- }
-done:
- *addr = (FPW)0x00FF00FF; /* restore read mode */
- if (flag)
- enable_interrupts();
- return rc;
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
+++ /dev/null
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003-2004
- *
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP730 P2 Board by Dave Peverley, MPC-Data Limited
- * (http://www.mpc-data.co.uk)
- *
- * TODO : Tidy up and change to use system register defines
- * from omap730.h where possible.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
- /* Save callers address in r11 - r11 must never be modified */
- mov r11, lr
-
- /*------------------------------------------------------*
- *mask all IRQs by setting all bits in the INTMR default*
- *------------------------------------------------------*/
- mov r1, #0xffffffff
- ldr r0, =REG_IHL1_MIR
- str r1, [r0]
- ldr r0, =REG_IHL2_MIR
- str r1, [r0]
-
- /*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT1) *
- *------------------------------------------------------*/
- ldr r0, REG_ARM_IDLECT1
- ldr r1, VAL_ARM_IDLECT1
- str r1, [r0]
-
- /*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT2) *
- *------------------------------------------------------*/
- ldr r0, REG_ARM_IDLECT2
- ldr r1, VAL_ARM_IDLECT2
- str r1, [r0]
-
- /*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT3) *
- *------------------------------------------------------*/
- ldr r0, REG_ARM_IDLECT3
- ldr r1, VAL_ARM_IDLECT3
- str r1, [r0]
-
-
- mov r1, #0x01 /* PER_EN bit */
- ldr r0, REG_ARM_RSTCT2
- strh r1, [r0] /* CLKM; Peripheral reset. */
-
- /* Set CLKM to Sync-Scalable */
- /* I supposedly need to enable the dsp clock before switching */
- mov r1, #0x1000
- ldr r0, REG_ARM_SYSST
- strh r1, [r0]
- mov r0, #0x400
-1:
- subs r0, r0, #0x1 /* wait for any bubbles to finish */
- bne 1b
- ldr r1, VAL_ARM_CKCTL
- ldr r0, REG_ARM_CKCTL
- strh r1, [r0]
-
- /* a few nops to let settle */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- /* setup DPLL 1 */
- /* Ramp up the clock to 96Mhz */
- ldr r1, VAL_DPLL1_CTL
- ldr r0, REG_DPLL1_CTL
- strh r1, [r0]
- ands r1, r1, #0x10 /* Check if PLL is enabled. */
- beq lock_end /* Do not look for lock if BYPASS selected */
-2:
- ldrh r1, [r0]
- ands r1, r1, #0x01 /* Check the LOCK bit.*/
- beq 2b /* loop until bit goes hi. */
-lock_end:
-
- /*------------------------------------------------------*
- * Turn off the watchdog during init... *
- *------------------------------------------------------*/
- ldr r0, REG_WATCHDOG
- ldr r1, WATCHDOG_VAL1
- str r1, [r0]
- ldr r1, WATCHDOG_VAL2
- str r1, [r0]
- ldr r0, REG_WSPRDOG
- ldr r1, WSPRDOG_VAL1
- str r1, [r0]
- ldr r0, REG_WWPSDOG
-
-watch1Wait:
- ldr r1, [r0]
- tst r1, #0x10
- bne watch1Wait
-
- ldr r0, REG_WSPRDOG
- ldr r1, WSPRDOG_VAL2
- str r1, [r0]
- ldr r0, REG_WWPSDOG
-watch2Wait:
- ldr r1, [r0]
- tst r1, #0x10
- bne watch2Wait
-
- /* Set memory timings corresponding to the new clock speed */
-
- /* Check execution location to determine current execution location
- * and branch to appropriate initialization code.
- */
- /* Compare physical SDRAM base & current execution location. */
- and r0, pc, #0xF0000000
- /* Compare. */
- cmp r0, #0
- /* Skip over EMIF-fast initialization if running from SDRAM. */
- bne skip_sdram
-
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800 /* value should be checked */
-3:
- subs r3, r3, #0x1 /* Decrement count */
- bne 3b
-
- ldr r0, REG_SDRAM_CONFIG
- ldr r1, SDRAM_CONFIG_VAL
- str r1, [r0]
-
- ldr r0, REG_SDRAM_MRS_LEGACY
- ldr r1, SDRAM_MRS_VAL
- str r1, [r0]
-
-skip_sdram:
-
-common_tc:
- /* slow interface */
- ldr r1, VAL_TC_EMIFS_CS0_CONFIG
- ldr r0, REG_TC_EMIFS_CS0_CONFIG
- str r1, [r0] /* Chip Select 0 */
-
- ldr r1, VAL_TC_EMIFS_CS1_CONFIG
- ldr r0, REG_TC_EMIFS_CS1_CONFIG
- str r1, [r0] /* Chip Select 1 */
- ldr r1, VAL_TC_EMIFS_CS2_CONFIG
- ldr r0, REG_TC_EMIFS_CS2_CONFIG
- str r1, [r0] /* Chip Select 2 */
- ldr r1, VAL_TC_EMIFS_CS3_CONFIG
- ldr r0, REG_TC_EMIFS_CS3_CONFIG
- str r1, [r0] /* Chip Select 3 */
-
- /* 48MHz clock request for UART1 */
- ldr r1, PERSEUS2_CONFIG_BASE
- ldrh r0, [r1, #CONFIG_PCC_CONF]
- orr r0, r0, #CONF_MOD_UART1_CLK_MODE_R
- strh r0, [r1, #CONFIG_PCC_CONF]
-
- /* Initialize public and private rheas
- * - set access factor 2 on both rhea / strobe
- * - disable write buffer on strb0, enable write buffer on strb1
- */
-
- ldr R0, REG_RHEA_PUB_CTL
- ldr R1, REG_RHEA_PRIV_CTL
- ldr R2, VAL_RHEA_CTL
- strh R2, [R0]
- strh R2, [R1]
- mov R3, #2 /* disable write buffer on strb0, enable write buffer on strb1 */
- strh R3, [R0, #0x08] /* arm rhea control reg */
- strh R3, [R1, #0x08]
-
- /* enable IRQ and FIQ */
-
- mrs r4, CPSR
- bic r4, r4, #IRQ_MASK
- bic r4, r4, #FIQ_MASK
- msr CPSR, r4
-
- /* set TAP CONF to TRI EMULATION */
-
- ldr r1, [r0, #CONFIG_MODE2]
- bic r1, r1, #0x18
- orr r1, r1, #0x10
- str r1, [r0, #CONFIG_MODE2]
-
- /* set tdbgen to 1 */
-
- ldr r0, PERSEUS2_CONFIG_BASE
- ldr r1, [r0, #CONFIG_MODE1]
- mov r2, #0x10000
- orr r1, r1, r2
- str r1, [r0, #CONFIG_MODE1]
-
-#ifdef CONFIG_P2_OMAP1610
- /* inserting additional 2 clock cycle hold time for LAN */
- ldr r0, REG_TC_EMIFS_CS1_ADVANCED
- ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
- str r1, [r0]
-#endif
- /* Start MPU Timer 1 */
- ldr r0, REG_MPU_LOAD_TIMER
- ldr r1, VAL_MPU_LOAD_TIMER
- str r1, [r0]
-
- ldr r0, REG_MPU_CNTL_TIMER
- ldr r1, VAL_MPU_CNTL_TIMER
- str r1, [r0]
-
- /* back to arch calling code */
- mov pc, r11
-
- /* the literal pools origin */
- .ltorg
-
-REG_TC_EMIFS_CONFIG: /* 32 bits */
- .word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
- .word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
- .word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
- .word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
- .word 0xfffecc1c
-
-#ifdef CONFIG_P2_OMAP730
-REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
- .word 0xfffecc54
-#endif
-
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL: /* 16 bits */
- .word 0xfffece00
-
-REG_ARM_IDLECT3: /* 16 bits */
- .word 0xfffece24
-REG_ARM_IDLECT2: /* 16 bits */
- .word 0xfffece08
-REG_ARM_IDLECT1: /* 16 bits */
- .word 0xfffece04
-
-REG_ARM_RSTCT2: /* 16 bits */
- .word 0xfffece14
-REG_ARM_SYSST: /* 16 bits */
- .word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL: /* 16 bits */
- .word 0xfffecf00
-
-/* Watch Dog register */
-/* secure watchdog stop */
-REG_WSPRDOG:
- .word 0xfffeb048
-/* watchdog write pending */
-REG_WWPSDOG:
- .word 0xfffeb034
-
-WSPRDOG_VAL1:
- .word 0x0000aaaa
-WSPRDOG_VAL2:
- .word 0x00005555
-
-/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
- counter @8192 rows, 10 ns, 8 burst */
-REG_SDRAM_CONFIG:
- .word 0xfffecc20
-
-REG_SDRAM_MRS_LEGACY:
- .word 0xfffecc24
-
-REG_WATCHDOG:
- .word 0xfffec808
-
-REG_MPU_LOAD_TIMER:
- .word 0xfffec504
-REG_MPU_CNTL_TIMER:
- .word 0xfffec500
-
-/* Public and private rhea bridge registers definition */
-
-REG_RHEA_PUB_CTL:
- .word 0xFFFECA00
-
-REG_RHEA_PRIV_CTL:
- .word 0xFFFED300
-
-/* EMIFF SDRAM Configuration register
- - self refresh disable
- - auto refresh enabled
- - SDRAM type 64 Mb, 16 bits bus 4 banks
- - power down enabled
- - SDRAM clock disabled
- */
-SDRAM_CONFIG_VAL:
- .word 0x0C017DF4
-
-/* Burst full page length ; cas latency = 3 */
-SDRAM_MRS_VAL:
- .word 0x00000037
-
-VAL_ARM_CKCTL:
- .word 0x6505
-VAL_DPLL1_CTL:
- .word 0x3412
-
-#ifdef CONFIG_P2_OMAP730
-VAL_TC_EMIFS_CS0_CONFIG:
- .word 0x0000FFF3
-VAL_TC_EMIFS_CS1_CONFIG:
- .word 0x00004278
-VAL_TC_EMIFS_CS2_CONFIG:
- .word 0x00004278
-VAL_TC_EMIFS_CS3_CONFIG:
- .word 0x00004278
-VAL_TC_EMIFS_CS1_ADVANCED:
- .word 0x00000022
-#endif
-
-VAL_ARM_IDLECT1:
- .word 0x00000400
-VAL_ARM_IDLECT2:
- .word 0x00000886
-VAL_ARM_IDLECT3:
- .word 0x00000015
-
-WATCHDOG_VAL1:
- .word 0x000000f5
-WATCHDOG_VAL2:
- .word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
- .word 0xffffffff
-VAL_MPU_CNTL_TIMER:
- .word 0xffffffa1
-
-VAL_RHEA_CTL:
- .word 0xFF22
-
-/* Config Register vals */
-PERSEUS2_CONFIG_BASE:
- .word 0xFFFE1000
-
-.equ CONFIG_PCC_CONF, 0xB4
-.equ CONFIG_MODE1, 0x10
-.equ CONFIG_MODE2, 0x14
-.equ CONF_MOD_UART1_CLK_MODE_R, 0x0A
-
-/* misc values */
-.equ IRQ_MASK, 0x80 /* IRQ mask value */
-.equ FIQ_MASK, 0x40 /* FIQ mask value */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int test_boot_mode(void);
-void spin_up_leds(void);
-void flash__init (void);
-void ether__init (void);
-void set_muxconf_regs (void);
-void peripheral_power_enable (void);
-
-#define FLASH_ON_CS0 1
-#define FLASH_ON_CS3 0
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-int test_boot_mode(void)
-{
- /* Check for CS0 and CS3 address decode swapping */
- if (*((volatile int *)EMIFS_CONFIG) & 0x00000002)
- return(FLASH_ON_CS3);
- else
- return(FLASH_ON_CS0);
-}
-
-/* Toggle backup LED indication */
-void toggle_backup_led(void)
-{
- static int backupLEDState = 0; /* Init variable so that the LED will be ON the first time */
- volatile unsigned int *IOConfReg;
-
-
- IOConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT);
-
- if (backupLEDState != 0) {
- *IOConfReg &= (0xFFFFEFFF);
- backupLEDState = 0;
- } else {
- *IOConfReg |= (0x00001000);
- backupLEDState = 1;
- }
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of OMAP 730 P2 Board - Same as the Innovator! */
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- /* Configure MUX settings */
- set_muxconf_regs ();
-
- peripheral_power_enable ();
-
- /* Backup LED indication via GPIO_140 -> Red led if MUX correctly setup */
- toggle_backup_led();
-
- /* Hold GSM in reset until needed */
- *((volatile unsigned short *)M_CTL) &= ~1;
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- *((volatile unsigned int *) FLASH_CFG_0) = 0x0000fff3;
- *((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000088;
-
- /* Ethernet support trough the debug board */
- /* CS1 timings setup */
- *((volatile unsigned int *) FLASH_CFG_1) = 0x0000fff3;
- *((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000000;
-
- /* this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable ();
-
- flash__init ();
- ether__init ();
-
- return 0;
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
- unsigned int regval;
-
- regval = *((volatile unsigned int *) EMIFS_CONFIG);
- /* Turn off write protection for flash devices. */
- regval = regval | 0x0001;
- *((volatile unsigned int *) EMIFS_CONFIG) = regval;
-}
-
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-#define LAN_RESET_REGISTER 0x0400001c
-
- *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
- do {
- *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001;
- udelay (100);
- } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001);
-
- do {
- *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
- udelay (100);
- } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000);
-
-#define ETH_CONTROL_REG 0x0400030b
-
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (100);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-/******************************************************
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers
- specific to the hardware
-*******************************************************/
-void set_muxconf_regs (void)
-{
- volatile unsigned int *MuxConfReg;
- /* set each registers to its reset value; */
-
- /*
- * Backup LED Indication
- */
-
- /* Configure MUXed pin. Mode 6: GPIO_140 */
- MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF10);
- *MuxConfReg &= (0xFFFFFF1F); /* Clear D_MPU_LPG1 */
- *MuxConfReg |= 0x000000C0; /* Set D_MPU_LPG1 to 0x6 */
-
- /* Configure GPIO_140 as output */
- MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL);
- *MuxConfReg &= (0xFFFFEFFF); /* Clear direction (output) for GPIO 140 */
-
- /*
- * Configure GPIOs for battery charge & feedback
- */
-
- /* Configure MUXed pin. Mode 6: GPIO_35 */
- MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3);
- *MuxConfReg &= 0xFFFFFFF1; /* Clear M_CLK_OUT */
- *MuxConfReg |= 0x0000000C; /* Set M_CLK_OUT = 0x6 (GPIOs) */
-
- /* Configure MUXed pin. Mode 6: GPIO_72,73,74 */
- MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF5);
- *MuxConfReg &= 0xFFFF1FFF; /* Clear D_DDR */
- *MuxConfReg |= 0x0000C000; /* Set D_DDR = 0x6 (GPIOs) */
-
- MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL);
- *MuxConfReg |= 0x00000100; /* Configure GPIO_72 as input */
- *MuxConfReg &= 0xFFFFFDFF; /* Configure GPIO_73 as output */
-
- /*
- * Allow battery charge
- */
-
- MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT);
- *MuxConfReg &= (0xFFFFFDFF); /* Clear GPIO_73 pin */
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF9);
- *MuxConfReg &= 0x1FFFFFFF;
-}
-
-/******************************************************
- Routine: peripheral_power_enable
- Description: Enable the power for UART1
-*******************************************************/
-void peripheral_power_enable (void)
-{
- volatile unsigned int *MuxConfReg;
-
-
- /* Set up pins used by UART */
-
- /* Start UART clock (48MHz) */
- MuxConfReg = (volatile unsigned int *) (PERSEUS_PCC_CONF_REG);
- *MuxConfReg &= (0xFFFFFFF7);
- *MuxConfReg |= (0x00000008);
-
- /* Get the UART pin in mode0 */
- MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3);
- *MuxConfReg &= (0xFF1FFFFF);
- *MuxConfReg &= (0xF1FFFFFF);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
return board_id;
}
+/**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+ int processor_rev = omap_revision();
+ int ret = 0;
+
+ if ((processor_rev >= OMAP4460_ES1_0 &&
+ processor_rev <= OMAP4460_ES1_1)) {
+
+ /* Setup the mux for the common board ID pins (gpio 171) */
+ writew((IEN | M3),
+ (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+
+ /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
+ ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ u32 omap4_rev = omap_revision();
+
+ /* Same devices and geometry on both EMIFs */
+ if (omap4_rev == OMAP4430_ES1_0)
+ *regs = &emif_regs_elpida_380_mhz_1cs;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ *regs = &emif_regs_elpida_200_mhz_2cs;
+ else if (omap4_rev == OMAP4430_ES2_3)
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else if (omap4_rev < OMAP4470_ES1_0) {
+ if(is_panda_es_rev_b3())
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_2cs;
+ }
+ else
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
#ifdef CONFIG_SPL_BUILD
static const struct cmd_control evm_ddr2_cctrl_data = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04,
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04,
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04,
.cmd2iclkout = 0x00,
};
.datagiratio0 = ((0<<10) | (0<<0)),
.datafwsratio0 = ((0x90<<10) | (0x90<<0)),
.datawrsratio0 = ((0x50<<10) | (0x50<<0)),
- .datauserank0delay = 1,
- .datadldiff0 = 0x4,
};
void set_uart_mux_conf(void)
.datagiratio0 = ((0x0<<10) | (0x0<<0)),
.datafwsratio0 = ((0x13A<<10) | (0x13A<<0)),
.datawrsratio0 = ((0x8A<<10) | (0x8A<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static struct cmd_control ddr2_ctrl = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04, /* reset value is 0x4 */
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04, /* reset value is 0x4 */
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04, /* reset value is 0x4 */
.cmd2iclkout = 0x00,
};
.datagiratio0 = ((0x20<<10) | 0x20<<0),
.datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
.datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static const struct cmd_control ddr3_ctrl = {
.cmd0csratio = 0x100,
- .cmd0dldiff = 0x004, /* reset value is 0x4 */
.cmd0iclkout = 0x001,
.cmd1csratio = 0x100,
- .cmd1dldiff = 0x004, /* reset value is 0x4 */
.cmd1iclkout = 0x001,
.cmd2csratio = 0x100,
- .cmd2dldiff = 0x004, /* reset value is 0x4 */
.cmd2iclkout = 0x001,
};
config_dmm(&evm_lisa_map_regs);
#ifdef CONFIG_TI816X_EVM_DDR2
- ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0) {
ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
#endif
#ifdef CONFIG_TI816X_EVM_DDR3
- ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0)
config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
__bss_end = .;
}
- /DISCARD/ : { *(.bss*) }
- /DISCARD/ : { *(.dynsym) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
+ .dynsym _end : { *(.dynsym) }
+ .dynbss : { *(.dynbss) }
+ .dynstr : { *(.dynstr*) }
+ .dynamic : { *(.dynamic*) }
+ .hash : { *(.hash*) }
+ .plt : { *(.plt*) }
+ .interp : { *(.interp*) }
+ .gnu : { *(.gnu*) }
+ .ARM.exidx : { *(.ARM.exidx*) }
}
Active arm arm926ejs at91 calao tny_a9260 tny_a9260_nandflash tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre@free-electrons.com>
Active arm arm926ejs at91 calao tny_a9260 tny_a9g20_eeprom tny_a9260:AT91SAM9G20,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre@free-electrons.com>
Active arm arm926ejs at91 calao tny_a9260 tny_a9g20_nandflash tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Active arm arm926ejs at91 calao usb_a9263 usb_a9263_dataflash usb_a9263:AT91SAM9263,SYS_USE_DATAFLASH Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Active arm arm926ejs at91 egnite ethernut5 ethernut5 ethernut5:AT91SAM9XE egnite GmbH <info@egnite.de>
Active arm arm926ejs at91 emk top9000 top9000eval_xe top9000:EVAL9000 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
Active arm arm926ejs at91 emk top9000 top9000su_xe top9000:SU9000 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
Active arm arm926ejs at91 ronetix pm9g45 pm9g45 pm9g45:AT91SAM9G45 Ilko Iliev <iliev@ronetix.at>
Active arm arm926ejs at91 taskit stamp9g20 portuxg20 stamp9g20:AT91SAM9G20,PORTUXG20 Markus Hubig <mhubig@imko.de>
Active arm arm926ejs at91 taskit stamp9g20 stamp9g20 stamp9g20:AT91SAM9G20 Markus Hubig <mhubig@imko.de>
+Active arm arm926ejs at91 siemens taurus axm taurus:AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM Heiko Schocher <hs@denx.de>
+Active arm arm926ejs at91 siemens corvus corvus corvus:AT91SAM9M10G45,SYS_USE_NANDFLASH Heiko Schocher <hs@denx.de>
+Active arm arm926ejs at91 siemens taurus taurus taurus:AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS Heiko Schocher <hs@denx.de>
Active arm arm926ejs davinci ait cam_enc_4xx cam_enc_4xx cam_enc_4xx Heiko Schocher <hs@denx.de>
Active arm arm926ejs davinci Barix ipam390 ipam390 - Heiko Schocher <hs@denx.de>
Active arm arm926ejs davinci davinci da8xxevm da830evm - Nick Thompson <nick.thompson@gefanuc.com>
Active arm arm926ejs nomadik st nhk8815 nhk8815 - Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>:Alessandro Rubini <rubini@unipv.it>
Active arm arm926ejs nomadik st nhk8815 nhk8815_onenand nhk8815:BOOT_ONENAND Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>:Alessandro Rubini <rubini@unipv.it>
Active arm arm926ejs omap ti - omap5912osk - Rishi Bhattacharya <rishi@ti.com>
-Active arm arm926ejs omap ti omap730p2 omap730p2 omap730p2:CS3_BOOT Dave Peverley <dpeverley@mpc-data.co.uk>
-Active arm arm926ejs omap ti omap730p2 omap730p2_cs0boot omap730p2:CS0_BOOT Dave Peverley <dpeverley@mpc-data.co.uk>
-Active arm arm926ejs omap ti omap730p2 omap730p2_cs3boot omap730p2:CS3_BOOT Dave Peverley <dpeverley@mpc-data.co.uk>
Active arm arm926ejs orion5x LaCie - edminiv2 - Albert ARIBAUD <albert.u.boot@aribaud.net>
Active arm arm926ejs pantheon Marvell - dkb - Lei Wen <leiwen@marvell.com>
Active arm arm926ejs spear spear - x600 x600 Stefan Roese <sr@denx.de>
Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - -
Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <matt.waddel@linaro.org>
Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <matt.waddel@linaro.org>
+Active arm armv7 am33xx compulab cm_t335 cm_t335 cm_t335 Igor Grinberg <grinberg@compulab.co.il>
Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
-Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <poeschel@lemonage.de>
+Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
+Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel@lemonage.de>
Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx ti am335x am335x_evm_nor am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am335x am335x_evm_norboot am335x_evm:SERIAL1,CONS_INDEX=1,NOR,NOR_BOOT Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am335x am335x_evm_spiboot am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT Tom Rini <trini@ti.com>
-Active arm armv7 am33xx ti am335x am335x_evm_uart1 am335x_evm:SERIAL2,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
-Active arm armv7 am33xx ti am335x am335x_evm_uart2 am335x_evm:SERIAL3,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
-Active arm armv7 am33xx ti am335x am335x_evm_uart3 am335x_evm:SERIAL4,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
-Active arm armv7 am33xx ti am335x am335x_evm_uart4 am335x_evm:SERIAL5,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
-Active arm armv7 am33xx ti am335x am335x_evm_uart5 am335x_evm:SERIAL6,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
+Active arm armv7 am33xx ti am335x am335x_evm_uart1 am335x_evm:SERIAL2,CONS_INDEX=2,NAND Tom Rini <trini@ti.com>
+Active arm armv7 am33xx ti am335x am335x_evm_uart2 am335x_evm:SERIAL3,CONS_INDEX=3,NAND Tom Rini <trini@ti.com>
+Active arm armv7 am33xx ti am335x am335x_evm_uart3 am335x_evm:SERIAL4,CONS_INDEX=4,NAND Tom Rini <trini@ti.com>
+Active arm armv7 am33xx ti am335x am335x_evm_uart4 am335x_evm:SERIAL5,CONS_INDEX=5,NAND Tom Rini <trini@ti.com>
+Active arm armv7 am33xx ti am335x am335x_evm_uart5 am335x_evm:SERIAL6,CONS_INDEX=6,NAND Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am335x am335x_evm_usbspl am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am43xx am43xx_evm am43xx_evm:SERIAL1,CONS_INDEX=1 -
-Active arm armv7 am33xx ti ti814x ti814x_evm - Matt Porter <mporter@ti.com>
+Active arm armv7 am33xx ti ti814x ti814x_evm - Matt Porter <matt.porter@linaro.org>
Active arm armv7 am33xx ti ti816x ti816x_evm - -
Active arm armv7 at91 atmel sama5d3xek sama5d3xek_mmc sama5d3xek:SAMA5D3,SYS_USE_MMC Bo Shen <voice.shen@atmel.com>
Active arm armv7 at91 atmel sama5d3xek sama5d3xek_nandflash sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH Bo Shen <voice.shen@atmel.com>
Active arm armv7 omap5 ti omap5_uevm omap5_uevm - -
Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active arm armv7 rmobile renesas koelsch koelsch - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active arm armv7 rmobile renesas koelsch koelsch_nor koelsch:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 s5pc1xx samsung goni s5p_goni - Minkyu Kang <mk7.kang@samsung.com>
Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com>
Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
3. add new structures for SoC access
4. Convert arch, driver and boards file to new SoC
5. remove legacy code, if all boards and drives are ready
+
+2013-10-30 Andreas Bießmann <andreas.devel@googlemail.com>:
+
+The goal is almost reached, we could remove the CONFIG_AT91_LEGACY switch but
+remain the CONFIG_ATMEL_LEGACY switch until the GPIO disaster is fixed. The
+AT91 spi driver has also some CONFIG_ATMEL_LEGACY stuff left, so another point
+to fix until this README can be removed.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+omap730p2 arm arm926ejs - 2013-11-11
pn62 powerpc mpc824x - 2013-11-11 Wolfgang Grandegger <wg@grandegger.com>
-pdnb3 arm ixp - 2013-09-24 Stefan Roese <sr@denx.de>
-scpu arm ixp - 2013-09-24 Stefan Roese <sr@denx.de>
+pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de>
+scpu arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de>
omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta <kshitij@ti.com>
CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs <matthias.fuchs@esd.eu>
Alaska8220 powerpc mpc8220 d6ed322 2013-05-11
int rc;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
if (!mem) {
free(pp);
- printf("No mem for table!\n");
+ printf("%s: No mem for table!\n", __func__);
return -ENOMEM;
}
95 - 4,
};
u8 fis[20];
- u16 *tmpid;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
u8 port;
/* Clean ccb data buffer */
/* Read id from sata */
port = pccb->target;
- tmpid = malloc(ATA_ID_WORDS * 2);
- if (!tmpid)
- return -ENOMEM;
if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
- free(tmpid);
return -EIO;
}
u32 linkmap;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->host_flags = ATA_FLAG_SATA
obj-$(CONFIG_AT91SAM9XE) += bootcount_at91.o
obj-$(CONFIG_BLACKFIN) += bootcount_blackfin.o
obj-$(CONFIG_SOC_DA8XX) += bootcount_davinci.o
-obj-$(CONFIG_AM33XX) += bootcount_davinci.o
+obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o
obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
+obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o
* (C) Copyright 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
+ * A bootcount driver for the RTC IP block found on many TI platforms.
+ * This requires the RTC clocks, etc, to be enabled prior to use and
+ * not all boards with this IP block on it will have the RTC in use.
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
--- /dev/null
+/*
+ * (C) Copyright 2013
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+void bootcount_store(ulong a)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+
+ if (upgrade_available) {
+ setenv_ulong("bootcount", a);
+ saveenv();
+ }
+}
+
+ulong bootcount_load(void)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+ ulong val = 0;
+
+ if (upgrade_available)
+ val = getenv_ulong("bootcount", 10, 0);
+
+ return val;
+}
#include <asm/sizes.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
static struct at91_port *at91_pio_get_port(unsigned port)
{
/* Common GPIO API */
-#define at91_gpio_to_port(gpio) (gpio / 32)
-#define at91_gpio_to_pin(gpio) (gpio % 32)
-
int gpio_request(unsigned gpio, const char *label)
{
return 0;
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
#include <asm/arch/gpio.h>
#endif
#endif
*/
#include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
#include <malloc.h>
#include <nand.h>
IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
#ifdef CONFIG_SYS_NAND_ENABLE_PIN
- at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
- !(ctrl & NAND_NCE));
+ gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
#endif
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
- return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+ return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
}
#endif
#include <common.h>
#include <asm/io.h>
-#ifndef CONFIG_AT91_LEGACY
#include <asm/arch/hardware.h>
#include <asm/arch/at91_emac.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
-#else
-/* remove next 5 lines, if all RM9200 boards convert to at91 arch */
-#include <asm/arch-at91/at91rm9200.h>
-#include <asm/arch-at91/hardware.h>
-#include <asm/arch-at91/at91_emac.h>
-#include <asm/arch-at91/at91_pmc.h>
-#include <asm/arch-at91/at91_pio.h>
-#endif
#include <net.h>
#include <netdev.h>
#include <malloc.h>
void *buffer;
int len;
- cpsw_update_link(priv);
+ cpsw_check_link(priv);
while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) {
invalidate_dcache_range((unsigned long)buffer,
#include <twl6030.h>
+static struct twl6030_data *twl;
+
+static struct twl6030_data twl6030_info = {
+ .chip_type = chip_TWL6030,
+ .adc_rbase = GPCH0_LSB,
+ .adc_ctrl = CTRL_P2,
+ .adc_enable = CTRL_P2_SP2,
+ .vbat_mult = TWL6030_VBAT_MULT,
+ .vbat_shift = TWL6030_VBAT_SHIFT,
+};
+
+static struct twl6030_data twl6032_info = {
+ .chip_type = chip_TWL6032,
+ .adc_rbase = TWL6032_GPCH0_LSB,
+ .adc_ctrl = TWL6032_CTRL_P1,
+ .adc_enable = CTRL_P1_SP1,
+ .vbat_mult = TWL6032_VBAT_MULT,
+ .vbat_shift = TWL6032_VBAT_SHIFT,
+};
+
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_LSB + channel_no * 2, &lsb);
+ twl->adc_rbase + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_MSB + channel_no * 2, &msb);
+ twl->adc_rbase + 1 + channel_no * 2, &msb);
if (ret)
return ret;
u8 val;
int ret = 0;
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, twl->adc_enable);
if (ret)
return ret;
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, &val);
if (ret)
return ret;
udelay(1000);
{
int battery_volt = 0;
int ret = 0;
+ u8 vbatch;
+
+ if (twl->chip_type == chip_TWL6030) {
+ vbatch = TWL6030_GPADC_VBAT_CHNL;
+ } else {
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPSELECT_ISB,
+ TWL6032_GPADC_VBAT_CHNL);
+ if (ret)
+ return ret;
+ vbatch = 0;
+ }
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
}
/* measure Vbat voltage */
- battery_volt = twl6030_gpadc_read_channel(7);
+ battery_volt = twl6030_gpadc_read_channel(vbatch);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
- battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+ battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
void twl6030_init_battery_charging(void)
{
- u8 stat1 = 0;
+ u8 val = 0;
int battery_volt = 0;
int ret = 0;
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
+ if (ret) {
+ puts("twl6030_init_battery_charging(): could not determine chip!\n");
+ return;
+ }
+ if (val == 0x30) {
+ twl = &twl6030_info;
+ } else if (val == 0x32) {
+ twl = &twl6032_info;
+ } else {
+ puts("twl6030_init_battery_charging(): unsupported chip type\n");
+ return;
+ }
+
/* Enable VBAT measurement */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ if (twl->chip_type == chip_TWL6030) {
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6030_GPADC_CTRL,
+ GPADC_CTRL_SCALER_DIV4);
+ } else {
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPADC_CTRL2,
+ GPADC_CTRL2_CH18_SCALER_EN);
+ }
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
/* check for battery presence indirectly via Fuel gauge */
- if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+ if ((val & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
return 0;
}
+__weak int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+ return gcnum;
+}
+
+static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ int gcnum;
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum > 0)
+ gcnum += 0x200;
+
+ return g_dnl_get_board_bcd_device_number(gcnum);
+}
+
static int g_dnl_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
if (ret)
goto error;
- gcnum = usb_gadget_controller_number(gadget);
-
- debug("gcnum: %d\n", gcnum);
+ gcnum = g_dnl_get_bcd_device_number(cdev);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(gcnum);
else {
debug("%s: controller '%s' not recognized\n",
shortname, gadget->name);
#define CLK_SEL_12MHZ (0x2 << 0)
#define CLK_SEL_48MHZ (0x0 << 0)
+#define EXYNOS4X12_ID_PULLUP0 (0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0 (0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ (0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ (0x05 << 0)
+
/* Device Configuration Register DCFG */
#define DEV_SPEED_HIGH_SPEED_20 (0x0 << 0)
#define DEV_SPEED_FULL_SPEED_20 (0x1 << 0)
writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
&~FORCE_SUSPEND_0), &phy->phypwr);
- writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
- CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+ if (s5p_cpu_id == 0x4412)
+ writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+ EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+ &phy->phyclk); /* PLL 24Mhz */
+ else
+ writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+ CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
| PHY_SW_RST0, &phy->rstcon);
static int omap_uhh_reset(void)
{
-/*
- * Soft resetting the UHH module causes instability issues on
- * all OMAPs so we just avoid it.
- *
- * See OMAP36xx Errata
- * i571: USB host EHCI may stall when entering smart-standby mode
- * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- *
- * On OMAP4/5, soft-resetting the UHH module will put it into
- * Smart-Idle mode and lead to a deadlock.
- *
- * On OMAP3, this doesn't seem to be the case but still instabilities
- * are observed on beagle (3530 ES1.0) if soft-reset is used.
- * e.g. NFS root failures with Linux kernel.
- */
+ int timeout = 0;
+ u32 rev;
+
+ rev = readl(&uhh->rev);
+
+ /* Soft RESET */
+ writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+ switch (rev) {
+ case OMAP_USBHS_REV1:
+ /* Wait for soft RESET to complete */
+ while (!(readl(&uhh->syss) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ /* Set No-Idle, No-Standby */
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+
+ default: /* Rev. 2 onwards */
+
+ udelay(2); /* Need to wait before accessing SYSCONFIG back */
+
+ /* Wait for soft RESET to complete */
+ while ((readl(&uhh->sysc) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+ }
+
return 0;
}
#ifndef VCBITMASK
#define VCBITMASK(bitno) (0x0001 << (bitno % 16))
#endif
-#ifndef CONFIG_AT91_LEGACY
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
#define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
do { \
#define VCXK_ACKNOWLEDGE \
(!(readl(&pio->CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT.pdsr) & \
CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#else
- #define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
- ((AT91PS_PIO) PORT)->PIO_PER = PIN; \
- ((AT91PS_PIO) PORT)->DDR = PIN; \
- ((AT91PS_PIO) PORT)->PIO_MDDR = PIN; \
- if (!I0O1) ((AT91PS_PIO) PORT)->PIO_PPUER = PIN;
-
- #define VCXK_SET_PIN(PORT, PIN) ((AT91PS_PIO) PORT)->PIO_SODR = PIN;
- #define VCXK_CLR_PIN(PORT, PIN) ((AT91PS_PIO) PORT)->PIO_CODR = PIN;
-
- #define VCXK_ACKNOWLEDGE \
- (!(((AT91PS_PIO) CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT)->\
- PIO_PDSR & CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#endif
#elif defined(CONFIG_MCF52x2)
#include <asm/m5282.h>
#ifndef VCBITMASK
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RESET_PHY_R
-
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_NET_RETRY_COUNT 20
/* USB */
"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
- "nandsrcaddr=0x280000\0" \
- "nandboot=echo Booting from nand ...; " \
+ "nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
- "bootz ${loadaddr}\0" \
- "nandimgsize=0x500000\0"
+ "nand read ${fdtaddr} u-boot-spl-os; " \
+ "nand read ${loadaddr} kernel; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0"
#else
#define NANDARGS ""
#endif
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
+/* Bootcount using the RTC block */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
+
/* CPSW support */
#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP34XX
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+
/*
* Board NAND Info.
*/
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-#define CONFIG_SPI_BOOTING
-#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
-#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_PART
#define CONFIG_RMII 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_RMII 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_SYS_TEXT_BASE 0x73f00000
-#define CONFIG_AT91_LEGACY
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/* ARM asynchronous clock */
/*
* Command line configuration.
*/
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5)
/* PMECC & PMERRLOC */
#define CONFIG_ATMEL_NAND_HWECC
--- /dev/null
+/*
+ * Config file for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_CM_T335_H
+#define __CONFIG_CM_T335_H
+
+#define CONFIG_CM_T335
+#define CONFIG_NAND
+
+#include <configs/ti_am335x_common.h>
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SPI
+#undef CONFIG_OMAP3_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPL_OS_BOOT
+#undef CONFIG_BOOTCOUNT_LIMIT
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+#undef CONFIG_MAX_RAM_BANK_SIZE
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "CM-T335 # "
+
+#define CONFIG_OMAP_COMMON
+
+#define MACH_TYPE_CM_T335 4586 /* Until the next sync */
+#define CONFIG_MACH_TYPE MACH_TYPE_CM_T335
+
+/* Clock Defines */
+#define V_OSCK 25000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+
+#ifndef CONFIG_SPL_BUILD
+#define MMCARGS \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+ "mmcrootfstype=ext4\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0"
+
+#define NANDARGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nandroot=ubi0:rootfs rw\0" \
+ "nandrootfstype=ubifs\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype} " \
+ "ubi.mtd=${rootfs_name}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nboot ${loadaddr} nand0 900000; " \
+ "bootm ${loadaddr}\0"
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=82000000\0" \
+ "console=ttyO0,115200n8\0" \
+ "rootfs_name=rootfs\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ MMCARGS \
+ NANDARGS
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD "no"
+
+/* Serial console configuration */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SERIAL1 1 /* UART0 */
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CONFIG_BAUDRATE 115200
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+/* Network. */
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR 0
+#define CONFIG_PHY_ATHEROS
+
+/* NAND support */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+#define CONFIG_CMD_NAND
+#define GPMC_NAND_ECC_LP_x8_LAYOUT
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \
+ "1m(u-boot),1m(u-boot-env)," \
+ "1m(dtb),4m(splash)," \
+ "6m(kernel),-(rootfs)"
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */
+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* GPIO pin + bank to pin ID mapping */
+#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
+
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BIT GPIO_PIN(2, 0)
+/* Status LED polarity is inversed, so init it in the "off" state */
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT 0
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Enable PCA9555 at I2C0-0x26.
+ * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
+ */
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26
+#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} }
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* __CONFIG_CM_T335_H */
+
/* Status LED */
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_GREEN 0
-#define STATUS_LED_BIT STATUS_LED_GREEN
+#define CONFIG_GPIO_LED
+#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
+#define GREEN_LED_DEV 0
+#define STATUS_LED_BIT GREEN_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT STATUS_LED_BIT
-#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
+#define STATUS_LED_BOOT GREEN_LED_DEV
#define CONFIG_SPLASHIMAGE_GUARD
--- /dev/null
+/*
+ * Common board functions for siemens AT91SAM9G45 based boards
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: include/configs/at91sam9m10g45ek.h
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define MACH_TYPE_CORVUS 2066
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+
+#define CONFIG_AT91_LEGACY
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91FAMILY
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
+#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
+
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
+
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_OFFSET_REDUND 0x180000
+#define CONFIG_ENV_SIZE 0x20000
+
+#define CONFIG_BOOTCOMMAND \
+ "nand read 0x70000000 0x200000 0x300000;" \
+ "bootm 0x70000000"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
+ 128*1024, 0x1000)
+
+#endif
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13)
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* LEDS */
/* Status LED */
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
#endif /* __CONFIG_DRA7XX_EVM_H */
#define CONFIG_SYS_MPUCLK 275
#define DXR2_IOCTRL_VAL 0x18b
-#define DDR_PLL_FREQ 266
-#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K
+#define DDR_PLL_FREQ 303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define BOARD_DFU_BUTTON_GPIO 27
#define BOARD_DFU_BUTTON_LED 64
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=dxr2\0" \
- "nand_img_size=0x300000\0" \
+ "nand_img_size=0x400000\0" \
"optargs=\0" \
CONFIG_COMMON_ENV_SETTINGS
"run dfu_start; " \
"reset; " \
"fi;" \
-"if ping ${serverip}; then " \
- "run net_nfs; " \
-"fi;" \
-"run nand_boot;"
+"run nand_boot;" \
+"reset;"
+
#else
#define CONFIG_BOOTDELAY 0
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000
-#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-
#define CONFIG_BOOT_RETRY_TIME 30
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
#endif
/* JFFS2 */
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_DRIVER_S3C24X0_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SLAVE 0x0
#define CONFIG_I2C_EDID
/* PMIC */
/* SPI */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
#ifdef CONFIG_SPI_FLASH
#define CONFIG_EXYNOS_SPI
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX77686
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS 5
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS 1
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#endif
-
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * TI H2 and P2 Debug Board hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- * Dave Peverley
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __INCLUDED_H2_P2_DBH_BOARD_H
-#define __INCLUDED_H2_P2_DBH_BOARD_H
-
-#include <asm/sizes.h>
-
-/*
- * The Debug board is designed to function with the P2 Sample, H2
- * Sample and 1610 Innovator boards. The main difference AFAICT is
- * the chip selects used with each system ;
- *
- * P2 Sample : CS1 of OMAP730 is used to select the CPLD & LAN regs
- * H2 Sample : CS1a is used to select the CPLD registers.
- *
- */
-
-/***************************************************************************
- * CPLD Registers
- **************************************************************************/
-
-#define H2DBG_CPLD_REVISION 0x04000010
-#define H2DBG_BOARD_REVISION 0x04000012
-#define H2DBG_GPIO_REGISTER 0x04000014
-#define H2DBG_LED_CONTROL 0x04000016
-#define H2DBG_MISC_INPUT 0x04000018
-#define H2DBG_LAN_STATUS 0x0400001A
-#define H2DBG_LAN_RESET 0x0400001C
-#define H2DBG_ETH_REG_BASE 0x04000300
-
-/***************************************************************************
- * Ethernet Control Registers
- * These are for the LAN91C96 on the debug board
- **************************************************************************/
-
-/* Bank 0 in IO space */
-
-#define ETH_TCR (H2DBG_ETH_REG_BASE + 0x00) /* Transmit Control Register */
-#define ETH_EPH_STATUS (H2DBG_ETH_REG_BASE + 0x02) /* EPH Status Register */
-#define ETH_RCR (H2DBG_ETH_REG_BASE + 0x04) /* Receive Control Register */
-#define ETH_COUNTER (H2DBG_ETH_REG_BASE + 0x06) /* Counter Register */
-#define ETH_MIR (H2DBG_ETH_REG_BASE + 0x08) /* Memory Information Register */
-#define ETH_MCR (H2DBG_ETH_REG_BASE + 0x0A) /* Memory Configuration Register */
-
-/* Bank 1 in IO space */
-
-#define ETH_CONFIG (H2DBG_ETH_REG_BASE + 0x00) /* Configuration Register */
-#define ETH_BASE (H2DBG_ETH_REG_BASE + 0x02) /* Base Address Register */
-#define ETH_IA0 (H2DBG_ETH_REG_BASE + 0x04) /* Individual Address Register - 0 */
-#define ETH_IA1 (H2DBG_ETH_REG_BASE + 0x05) /* Individual Address Register - 1 */
-#define ETH_IA2 (H2DBG_ETH_REG_BASE + 0x06) /* Individual Address Register - 2 */
-#define ETH_IA3 (H2DBG_ETH_REG_BASE + 0x07) /* Individual Address Register - 3 */
-#define ETH_IA4 (H2DBG_ETH_REG_BASE + 0x08) /* Individual Address Register - 4 */
-#define ETH_IA5 (H2DBG_ETH_REG_BASE + 0x09) /* Individual Address Register - 5 */
-#define ETH_GEN_PURPOSE (H2DBG_ETH_REG_BASE + 0x0A) /* General Address Registers */
-#define ETH_CONTROL (H2DBG_ETH_REG_BASE + 0x0B) /* Control Register */
-
-/* Bank 2 in IO space */
-
-#define ETH_MMU (H2DBG_ETH_REG_BASE + 0x00) /* MMU Command Register */
-#define ETH_AUTO_TX_START (H2DBG_ETH_REG_BASE + 0x01) /* Auto Tx Start Register */
-#define ETH_PNR (H2DBG_ETH_REG_BASE + 0x02) /* Packet Number Register */
-#define ETH_ARR (H2DBG_ETH_REG_BASE + 0x03) /* Allocation Result Register */
-#define ETH_FIFO (H2DBG_ETH_REG_BASE + 0x04) /* FIFO Ports Register */
-#define ETH_POINTER (H2DBG_ETH_REG_BASE + 0x06) /* Pointer Register */
-#define ETH_DATA_HIGH (H2DBG_ETH_REG_BASE + 0x08) /* Data High Register */
-#define ETH_DATA_LOW (H2DBG_ETH_REG_BASE + 0x0A) /* Data Low Register */
-#define ETH_INT_STATS (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Status Register - RO */
-#define ETH_INT_ACK (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Acknowledge Register -WO */
-#define ETH_INT_MASK (H2DBG_ETH_REG_BASE + 0x0D) /* Interrupt Mask Register */
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * A couple of utility inlines to aid debugging using the LED's on the
- * debug board.
- */
-
-static inline void set_led_state(int state)
-{
- static unsigned long hw_led_state = 0;
- volatile unsigned short *led_address = (volatile unsigned short *)0x04000016;
-
- hw_led_state = ((unsigned long)state);
- *((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF);
-}
-
-
-static inline void spin_up_leds(void)
-{
- volatile int i, j, k;
-
- for (k = 0; k < 2; k++) {
- for (i = 0; i < 16; i++) {
- for (j = 0; j < 5000; j++) {
- set_led_state(1 << i);
- }
- }
- for (i = 15; i >= 0; i--) {
- for (j = 0; j < 5000; j++) {
- set_led_state(1 << i);
- }
- }
- }
-}
-
-#endif /* ! __ASSEMBLY__ */
-
-#endif /* ! __INCLUDED_H2_P2_DBH_BOARD_H */
--- /dev/null
+/*
+ * include/configs/koelsch.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __KOELSCH_H
+#define __KOELSCH_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7791
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Koelsch"
+#define CONFIG_SH_GPIO_PFC
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_FLASH
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_OF_LIBFDT
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS ""
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_TMU_TIMER
+
+/* STACK */
+#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffc
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define KOELSCH_SDRAM_BASE 0x40000000
+#define KOELSCH_SDRAM_SIZE (2048u * 1024 * 1024)
+#define KOELSCH_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF0
+#define SCIF0_BASE 0xe6e60000
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (KOELSCH_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 504 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (KOELSCH_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (KOELSCH_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
+#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) }
+#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 10000000
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+
+#endif /* __KOELSCH_H */
--- /dev/null
+/*
+ * include/configs/lager.h
+ * This file is lager board configuration.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __LAGER_H
+#define __LAGER_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7790
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Lager"
+#define CONFIG_SH_GPIO_PFC
+#define MACH_TYPE_LAGER 4538
+#define CONFIG_MACH_TYPE MACH_TYPE_LAGER
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_FLASH
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT
+
+/* #define CONFIG_OF_LIBFDT */
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS ""
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_TMU_TIMER
+
+/* STACK */
+#define CONFIG_SYS_INIT_SP_ADDR 0xE827fffc
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define LAGER_SDRAM_BASE 0x40000000
+#define LAGER_SDRAM_SIZE (2048u * 1024 * 1024)
+#define LAGER_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF0
+#define SCIF0_BASE 0xe6e60000
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (LAGER_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 504 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (LAGER_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (LAGER_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* USE NOR FLASH */
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
+#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) }
+#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
+
+/* Board Clock */
+#define CONFIG_BASE_CLK_FREQ 20000000u
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2)
+#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
+#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+
+#endif /* __LAGER_H */
# define CONFIG_SYS_NAND_DBW_8
# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
/* Ethernet */
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
#include <configs/omap4_common.h>
#define CONFIG_CMD_NET
/* Max time to hold reset on this board, see doc/README.omap-reset-time */
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
#endif /* __CONFIG_OMAP5_EVM_H */
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * OMAP730 hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- * Dave Peverley
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __INCLUDED_OMAP730_H
-#define __INCLUDED_OMAP730_H
-
-#include <asm/sizes.h>
-
-/***************************************************************************
- * OMAP730 Configuration Registers
- **************************************************************************/
-
-#define PERSEUS2_MPU_DEV_ID ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GSM_DEV_ID0 ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GDM_DEV_ID1 ((unsigned int)(0xFFFE1002))
-#define DSP_CONF ((unsigned int)(0xFFFE1004))
-#define PERSEUS2_MPU_DIE_ID0 ((unsigned int)(0xFFFE1008))
-#define GSM_ASIC_CONF ((unsigned int)(0xFFFE1008))
-#define PERSEUS2_MPU_DIE_ID1 ((unsigned int)(0xFFFE100C))
-#define PERSEUS2_MODE1 ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID0 ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID1 ((unsigned int)(0xFFFE1012))
-#define PERSEUS2_MODE2 ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID2 ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID3 ((unsigned int)(0xFFFE1016))
-#define PERSEUS2_ANALOG_CELLS_CONF ((unsigned int)(0xFFFE1018))
-#define SPECCTL ((unsigned int)(0xFFFE101C))
-#define SPARE1 ((unsigned int)(0xFFFE1020))
-#define SPARE2 ((unsigned int)(0xFFFE1024))
-#define GSM_PBG_IRQ ((unsigned int)(0xFFFE1028))
-#define DMA_REQ_CONF ((unsigned int)(0xFFFE1030))
-#define PE_CONF_NO_DUAL ((unsigned int)(0xFFFE1060))
-#define PERSEUS2_IO_CONF0 ((unsigned int)(0xFFFE1070))
-#define PERSEUS2_IO_CONF1 ((unsigned int)(0xFFFE1074))
-#define PERSEUS2_IO_CONF2 ((unsigned int)(0xFFFE1078))
-#define PERSEUS2_IO_CONF3 ((unsigned int)(0xFFFE107C))
-#define PERSEUS2_IO_CONF4 ((unsigned int)(0xFFFE1080))
-#define PERSEUS2_IO_CONF5 ((unsigned int)(0xFFFE1084))
-#define PERSEUS2_IO_CONF6 ((unsigned int)(0xFFFE1088))
-#define PERSEUS2_IO_CONF7 ((unsigned int)(0xFFFE108C))
-#define PERSEUS2_IO_CONF8 ((unsigned int)(0xFFFE1090))
-#define PERSEUS2_IO_CONF9 ((unsigned int)(0xFFFE1094))
-#define PERSEUS2_IO_CONF10 ((unsigned int)(0xFFFE1098))
-#define PERSEUS2_IO_CONF11 ((unsigned int)(0xFFFE109C))
-#define PERSEUS2_IO_CONF12 ((unsigned int)(0xFFFE10A0))
-#define PERSEUS2_IO_CONF13 ((unsigned int)(0xFFFE10A4))
-#define PERSEUS_PCC_CONF_REG ((unsigned int)(0xFFFE10B4))
-#define BIST_STATUS_INTERNAL ((unsigned int)(0xFFFE10B8))
-#define BIST_CONTROL ((unsigned int)(0xFFFE10C0))
-#define BOOT_ROM_REG ((unsigned int)(0xFFFE10C4))
-#define PRODUCTION_ID_REG ((unsigned int)(0xFFFE10C8))
-#define BIST_SECROM_SIGNATURE1_INTERNAL ((unsigned int)(0xFFFE10D0))
-#define BIST_SECROM_SIGNATURE2_INTERNAL ((unsigned int)(0xFFFE10D4))
-#define BIST_CONTROL_2 ((unsigned int)(0xFFFE10D8))
-#define DEBUG1 ((unsigned int)(0xFFFE10E0))
-#define DEBUG2 ((unsigned int)(0xFFFE10E4))
-#define DEBUG_DMA_IRQ ((unsigned int)(0xFFFE10E8))
-
-/***************************************************************************
- * OMAP730 EMIFS Registers (TRM 2.5.7)
- **************************************************************************/
-
-#define TCMIF_BASE 0xFFFECC00
-
-#define EMIFS_LRUREG (TCMIF_BASE + 0x04)
-#define EMIFS_CONFIG (TCMIF_BASE + 0x0C)
-#define FLASH_CFG_0 (TCMIF_BASE + 0x10)
-#define FLASH_CFG_1 (TCMIF_BASE + 0x14)
-#define FLASH_CFG_2 (TCMIF_BASE + 0x18)
-#define FLASH_CFG_3 (TCMIF_BASE + 0x1C)
-#define FL_CFG_DYN_WAIT (TCMIF_BASE + 0x40)
-#define EMIFS_TIMEOUT1_REG (TCMIF_BASE + 0x28)
-#define EMIFS_TIMEOUT2_REG (TCMIF_BASE + 0x2C)
-#define EMIFS_TIMEOUT3_REG (TCMIF_BASE + 0x30)
-#define EMIFS_ABORT_ADDR (TCMIF_BASE + 0x44)
-#define EMIFS_ABORT_TYPE (TCMIF_BASE + 0x48)
-#define EMIFS_ABORT_TOUT (TCMIF_BASE + 0x4C)
-#define FLASH_ACFG_0_1 (TCMIF_BASE + 0x50)
-#define FLASH_ACFG_1_1 (TCMIF_BASE + 0x54)
-#define FLASH_ACFG_2_1 (TCMIF_BASE + 0x58)
-#define FLASH_ACFG_3_1 (TCMIF_BASE + 0x5C)
-
-/***************************************************************************
- * OMAP730 Interrupt handlers
- **************************************************************************/
-
-#define OMAP_IH1_BASE 0xFFFECB00 /* MPU Level 1 IRQ handler */
-#define OMAP_IH2_BASE 0xfffe0000
-
-/***************************************************************************
- * OMAP730 Timers
- *
- * There are three general purpose OS timers in the 730 that can be
- * configured in autoreload or one-shot modes.
- **************************************************************************/
-
-#define OMAP730_32kHz_TIMER_BASE 0xFFFB9000
-
-/* 32k Timer Registers */
-#define TIMER32k_CR 0x08
-#define TIMER32k_TVR 0x00
-#define TIMER32k_TCR 0x04
-
-/* 32k Timer Control Register definition */
-#define TIMER32k_TSS (1<<0)
-#define TIMER32k_TRB (1<<1)
-#define TIMER32k_INT (1<<2)
-#define TIMER32k_ARL (1<<3)
-
-/* MPU Timer base addresses */
-#define OMAP730_MPUTIMER_BASE 0xfffec500
-#define OMAP730_MPUTIMER_OFF 0x00000100
-
-#define OMAP730_TIMER1_BASE 0xFFFEC500
-#define OMAP730_TIMER2_BASE 0xFFFEC600
-#define OMAP730_TIMER3_BASE 0xFFFEC700
-
-/* MPU Timer Register offsets */
-#define CNTL_TIMER 0x00 /* MPU_CNTL_TIMER */
-#define LOAD_TIM 0x04 /* MPU_LOAD_TIMER */
-#define READ_TIM 0x08 /* MPU_READ_TIMER */
-
-/* MPU_CNTL_TIMER register bits */
-#define MPUTIM_FREE (1<<6)
-#define MPUTIM_CLOCK_ENABLE (1<<5)
-#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
-#define MPUTIM_PTV_BIT 2
-#define MPUTIM_AR (1<<1)
-#define MPUTIM_ST (1<<0)
-
-/***************************************************************************
- * OMAP730 GPIO
- *
- * The GPIO control is split over 6 register bases in the OMAP730 to allow
- * access to all the (6 x 32) GPIO pins!
- **************************************************************************/
-
-#define OMAP730_GPIO_BASE_1 0xFFFBC000
-#define OMAP730_GPIO_BASE_2 0xFFFBC800
-#define OMAP730_GPIO_BASE_3 0xFFFBD000
-#define OMAP730_GPIO_BASE_4 0xFFFBD800
-#define OMAP730_GPIO_BASE_5 0xFFFBE000
-#define OMAP730_GPIO_BASE_6 0xFFFBE800
-
-#define GPIO_DATA_INPUT 0x00
-#define GPIO_DATA_OUTPUT 0x04
-#define GPIO_DIRECTION_CONTROL 0x08
-#define GPIO_INTERRUPT_CONTROL 0x0C
-#define GPIO_INTERRUPT_MASK 0x10
-#define GPIO_INTERRUPT_STATUS 0x14
-
-#define GPIO_DATA_INPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
-
-/***************************************************************************
- * OMAP730 Watchdog timers
- **************************************************************************/
-
-#define WDTIM_BASE 0xFFFEC800
-#define WDTIM_CONTROL (WDTIM_BASE + 0x00) /* MPU_CNTL_TIMER */
-#define WDTIM_LOAD (WDTIM_BASE + 0x04) /* MPU_LOAD_TIMER */
-#define WDTIM_READ (WDTIM_BASE + 0x04) /* MPU_READ_TIMER */
-#define WDTIM_MODE (WDTIM_BASE + 0x08) /* MPU_TIMER_MODE */
-
-/***************************************************************************
- * OMAP730 Interrupt Registers
- **************************************************************************/
-
-/* Interrupt Register offsets */
-
-#define IRQ_ITR 0x00
-#define IRQ_MIR 0x04
-#define IRQ_SIR_IRQ 0x10
-#define IRQ_SIR_FIQ 0x14
-#define IRQ_CONTROL_REG 0x18
-#define IRQ_ILR0 0x1C /* ILRx == ILR0 + (0x4 * x) */
-#define IRQ_SIR 0x9C /* a.k.a.IRQ_ISR */
-#define IRQ_GMIR 0xA0
-
-#define REG_IHL1_MIR (OMAP_IH1_BASE + IRQ_MIR)
-#define REG_IHL2_MIR (OMAP_IH2_BASE + IRQ_MIR)
-
-/***************************************************************************
- * OMAP730 Intersystem Communication Register (TRM 4.5)
- **************************************************************************/
-
-#define ICR_BASE 0xFFFBB800
-
-#define M_ICR (ICR_BASE + 0x00)
-#define G_ICR (ICR_BASE + 0x02)
-#define M_CTL (ICR_BASE + 0x04)
-#define G_CTL (ICR_BASE + 0x06)
-#define PM_BA (ICR_BASE + 0x0A)
-#define DM_BA (ICR_BASE + 0x0C)
-#define RM_BA (ICR_BASE + 0x0E)
-#define SSPI_TAS (ICR_BASE + 0x12)
-
-#endif /* ! __INCLUDED_OMAP730_H */
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * MPC Data Limited (http://www.mpc-data.co.uk)
- * Dave Peverley <dpeverley at mpc-data.co.uk>
- *
- * Configuation settings for the TI OMAP Perseus 2 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP730 1 /* which is in a 730 */
-#define CONFIG_P2_OMAP730 1 /* a Perseus 2 Board */
-
-/*
- * Input clock of PLL
- * The OMAP730 Perseus 2 has 13MHz input clock
- */
-
-#define CONFIG_SYS_CLK_FREQ 13000000
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04000300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (1)
-#define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart
- * on perseus */
-
-/*
- * select serial console configuration
- */
-
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP730 Perseus 2 */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap730.h>
-#include <configs/h2_p2_dbg_board.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw ip=bootp"
-
-#define CONFIG_LOADADDR 0x10000000
-
-#define CONFIG_ETHADDR
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.23
-#define CONFIG_SERVERIP 192.150.0.100
-#define CONFIG_BOOTFILE "uImage" /* File to load */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "OMAP730 P2 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
-
-/* The OMAP730 has 3 general purpose MPU timers, they can be driven by
- * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
- * local divisor.
- */
-#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#if defined(CONFIG_CS0_BOOT)
-#define PHYS_FLASH_1 0x0C000000
-#elif defined(CONFIG_CS3_BOOT)
-#define PHYS_FLASH_1 0x00000000
-#else
-#error Unknown Boot Chip-Select number
-#endif
-
-#define PHYS_SRAM 0x20000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
-/* addr of environment */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x020000)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET 0x20000 /* environment starts here */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
-
-#endif /* ! __CONFIG_H */
# define CONFIG_SYS_NAND_DBW_8
# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
/* Ethernet */
#define CONFIG_SYS_MCKR1_VAL \
(AT91_PMC_MCKR_CSS_SLOW | \
AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2 | \
- AT91_PMC_MCKR_PLLADIV_1)
+ AT91_PMC_MCKR_MDIV_2)
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR2_VAL \
(AT91_PMC_MCKR_CSS_PLLA | \
AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2 | \
- AT91_PMC_MCKR_PLLADIV_1)
+ AT91_PMC_MCKR_MDIV_2)
/* define PDC[31:16] as DATA[31:16] */
#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIO_PORTC, 12
-#define CONFIG_GREEN_LED AT91_PIO_PORTC, 13
-#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 15
+#define CONFIG_RED_LED GPIO_PIN_PC(12)
+#define CONFIG_GREEN_LED GPIO_PIN_PC(13)
+#define CONFIG_YELLOW_LED GPIO_PIN_PC(15)
#define CONFIG_BOOTDELAY 3
#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
/* our CLE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16)
/* NOR flash */
#define CONFIG_SYS_FLASH_CFI 1
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* this is the user1 led */
+#define CONFIG_RED_LED GPIO_PIN_PB(7) /* this is the power led */
+#define CONFIG_GREEN_LED GPIO_PIN_PB(8) /* this is the user1 led */
#define CONFIG_BOOTDELAY 3
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 30
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(30)
#endif
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */
#define CONFIG_BOOTDELAY 3
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3)
#endif
"hostname=pxm2\0" \
"nand_img_size=0x500000\0" \
"optargs=\0" \
+ "splashpos=m,m\0" \
CONFIG_COMMON_ENV_SETTINGS \
"mmc_dev=0\0" \
"mmc_root=/dev/mmcblk0p2 rw\0" \
"fi;" \
"fi;" \
"run nand_boot;" \
- "if ping ${serverip}; then " \
- "run net_nfs; " \
- "fi; "
+ "reset;"
#else
#define CONFIG_BOOTDELAY 0
#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
#define PWM_TICKS 0x1388
#define PWM_DUTY 0x200
+#define CONFIG_SYS_CONSOLE_BG_COL 0xff
+#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
#endif /* ! __CONFIG_PXM2_H */
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=rut\0" \
- "splashpos=488,352\0" \
+ "nand_img_size=0x500000\0" \
+ "splashpos=m,m\0" \
"optargs=fixrtc --no-log consoleblank=0 \0" \
CONFIG_COMMON_ENV_SETTINGS \
"mmc_dev=0\0" \
"fi;" \
"fi;" \
"run nand_boot;" \
- "if ping ${serverip}; then " \
- "run net_nfs; " \
- "fi; "
+ "reset;"
#else
#define CONFIG_BOOTDELAY 0
#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_FORMIKE
+#define DISPL_PLL_SPREAD_SPECTRUM
+#define CONFIG_SYS_CONSOLE_BG_COL 0xff
+#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
#endif /* ! __CONFIG_RUT_H */
#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR 0x310000
+#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
/* SerialFlash */
#define CONFIG_CMD_SF
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x300000
+#define CONFIG_SPL_MAX_SIZE 0x10000
+#define CONFIG_SPL_BSS_START_ADDR 0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#endif
+
#endif
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_GADGET
#define CONFIG_USBDOWNLOAD_GADGET
-/* USB TI's IDs */
+/* USB DRACO ID as default */
#define CONFIG_USBD_HS
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47
-#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0908
+#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
+#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
/* USB Device Firmware Update support */
#define CONFIG_DFU_FUNCTION
#define CONFIG_COMMON_ENV_SETTINGS \
"verify=no \0" \
"project_dir=systemone\0" \
+ "upgrade_available=0\0" \
+ "altbootcmd=run bootcmd\0" \
+ "bootlimit=3\0" \
+ "partitionset_active=A\0" \
"loadaddr=0x82000000\0" \
"kloadaddr=0x81000000\0" \
"script_addr=0x81900000\0" \
- "console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \
- "active_set=a\0" \
+ "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
"nand_active_ubi_vol=rootfs_a\0" \
+ "nand_active_ubi_vol_A=rootfs_a\0" \
+ "nand_active_ubi_vol_B=rootfs_b\0" \
"nand_root_fs_type=ubifs rootwait=1\0" \
"nand_src_addr=0x280000\0" \
- "nand_src_addr_a=0x280000\0" \
- "nand_src_addr_b=0x780000\0" \
+ "nand_src_addr_A=0x280000\0" \
+ "nand_src_addr_B=0x780000\0" \
"nfsopts=nolock rw mem=128M\0" \
"ip_method=none\0" \
"bootenv=uEnv.txt\0" \
"bootargs_defaults=setenv bootargs " \
"console=${console} " \
+ "${testargs} " \
"${optargs}\0" \
"nand_args=run bootargs_defaults;" \
"mtdparts default;" \
- "setenv nand_active_ubi_vol rootfs_${active_set};" \
- "setenv ${active_set} true;" \
- "if test -n ${a}; then " \
- "setenv nand_src_addr ${nand_src_addr_a};" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
+ "setenv nand_src_addr ${nand_src_addr_A};" \
"fi;" \
- "if test -n ${b}; then " \
- "setenv nand_src_addr ${nand_src_addr_b};" \
+ "if test -n ${B}; then " \
+ "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
+ "setenv nand_src_addr ${nand_src_addr_B};" \
"fi;" \
"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
"ubi.mtd=9,2048;" \
"setenv bootargs ${bootargs} " \
"root=/dev/nfs ${mtdparts} " \
"nfsroot=${serverip}:${rootpath},${nfsopts} " \
- "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
+ "ip=${ipaddr}:${serverip}:" \
"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
- "nand_boot=echo Booting from nand, active set ${active_set} ...; " \
+ "nand_boot=echo Booting from nand; " \
+ "if test ${upgrade_available} -eq 1; then " \
+ "if test ${bootcount} -gt ${bootlimit}; " \
+ "then " \
+ "setenv upgrade_available 0;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv partitionset_active B; " \
+ "env delete A; " \
+ "fi;" \
+ "if test -n ${B}; then " \
+ "setenv partitionset_active A; " \
+ "env delete B; " \
+ "fi;" \
+ "saveenv; " \
+ "fi;" \
+ "fi;" \
+ "echo set ${partitionset_active}...;" \
"run nand_args; " \
"nand read.i ${kloadaddr} ${nand_src_addr} " \
"${nand_img_size}; bootm ${kloadaddr}\0" \
"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
"bootm ${kloadaddr}\0" \
"flash_self=run nand_boot\0" \
- "flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \
+ "flash_self_test=setenv testargs test; " \
"run nand_boot\0" \
"dfu_start=echo Preparing for dfu mode ...; " \
"run dfu_args; \0" \
"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
"from memory and root filesystem over NFS; echo Type " \
"'run net_nfs' to get Kernel over TFTP and mount root " \
- "filesystem over NFS; echo Set active_set variable to 'a' " \
- "or 'b' to select kernel and rootfs partition; " \
+ "filesystem over NFS; " \
+ "echo Set partitionset_active variable to 'A' " \
+ "or 'B' to select kernel and rootfs partition; " \
"echo" \
"\0"
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
"press \"<Esc><Esc>\" to stop\n", bootdelay
+/* Reboot after 60 sec if bootcmd fails */
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME 60
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_ENV
+
+/* Enable Device-Tree (FDT) support */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_FDT
+
#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_TFTP_PORT
#define CONFIG_TFTP_TSIZE
#define CONFIG_USB_STORAGE
/* GPIOs and IO expander */
-#define CONFIG_AT91_LEGACY
#define CONFIG_ATMEL_LEGACY
#define CONFIG_AT91_GPIO
#define CONFIG_AT91_GPIO_PULLUP 1
#ifdef CONFIG_MACB
# define CONFIG_RMII /* use reduced MII inteface */
# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* BOOTP and DHCP options */
# define CONFIG_BOOTP_BOOTFILESIZE
--- /dev/null
+/*
+ * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: include/configs/at91sam9260ek.h
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
+#define MACH_TYPE_TAURUS 2067
+#define MACH_TYPE_AXM 2068
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+
+
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* Misc CPU related */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+# define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#if defined(CONFIG_BOARD_TAURUS)
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#endif
+
+/* load address */
+#define CONFIG_SYS_LOAD_ADDR 0x22000000
+
+/* bootstrap in spi flash , u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_OFFSET_REDUND 0x180000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+
+#endif
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#include <asm/arch/omap.h>
/*
* RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value.
+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
+ * in the board config.
*/
-#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
/* Enable the HW watchdog, since we can use this with bootcount */
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_USB_CABLE_CHECK
/* LCD */
#define CONFIG_EXYNOS_FB
#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */
#define CONFIG_TIZEN /* TIZEN lib */
-#define PLATFORM_NO_UNALIGNED
-
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20))
+#include <asm/sizes.h>
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_DFU
#define CONFIG_CMD_GPT
#define CONFIG_CMD_PMIC
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+
+/* TIZEN THOR downloader support */
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_THOR_FUNCTION
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
+
/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
#undef CONFIG_CMD_NET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* Tizen - partitions definitions */
-#define PARTS_CSA "csa-mmc"
-#define PARTS_BOOTLOADER "u-boot"
+#define PARTS_CSA "csa"
#define PARTS_BOOT "boot"
+#define PARTS_MODEM "modem"
+#define PARTS_CSC "csc"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
-#define PARTS_CSC "csc"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
- "uuid_disk=${uuid_gpt_disk};" \
- "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
- "name="PARTS_BOOTLOADER",size=60MiB," \
- "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
- "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
- "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
- "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+ "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+ "name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+ "name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+ "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+ "name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+#define CONFIG_DFU_ALT \
+ "u-boot mmc 80 800;" \
+ "uImage ext4 0 2;" \
+ "exynos4412-trats2.dtb ext4 0 2;" \
+ ""PARTS_ROOT" part 0 5\0"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"kernelname=uImage\0" \
- "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
- "0x40007FC0 ${kernelname}\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
+ "${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
- "mmcdev=0\0" \
+ "mmcdev=CONFIG_MMC_DEFAULT_DEV\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
+ "dfu_alt_info=" CONFIG_DFU_ALT \
"uartpath=ap\0" \
"usbpath=ap\0" \
"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_HZ 1000
-
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_POWER_MUIC_MAX77693
#define CONFIG_POWER_FG_MAX77693
#define CONFIG_POWER_BATTERY_TRATS2
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_USB_CABLE_CHECK
/* LCD */
#define CONFIG_EXYNOS_FB
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
--- /dev/null
+/*
+ * (C) Copyright 2007-2013
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
+ * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Settings for Calao USB-A9263 board
+ *
+ * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
+ * installed on board will not be able to load it properly.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/hardware.h>
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000
+#define AT91_SPI_CLK 8000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* no NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
+#endif
+
+#define MTDPARTS_DEFAULT \
+ "mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+/* bootstrap + u-boot + env in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock1 " \
+ "mtdparts=" MTDPARTS_DEFAULT " " \
+ "rw rootfstype=jffs2"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+
+#endif
#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
#define CONFIG_SYS_TIMER_RATE 1000000
-#define CONFIG_SYS_TIMER_COUNTER (0x10011000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/* SMSC9115 Ethernet from SMSC9118 family */
#define CONFIG_SYS_NAND_DBW_8 1
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 0
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0)
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
#define CONFIG_RMII
#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 5
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_OVERWRITE_ETHADDR_ONCE
# elif (defined(CONFIG_AT91RM9200) || \
defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \
- defined(CONFIG_AT91SAM9263)) && !defined(CONFIG_AT91_LEGACY)
+ defined(CONFIG_AT91SAM9263))
# define I2C_SOFT_DECLARATIONS at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
# else
# define I2C_SOFT_DECLARATIONS
#define CTRL_P2_EOCP2 (1 << 1)
#define CTRL_P2_BUSY (1 << 0)
+#define TWL6032_CTRL_P1 0x36
+#define CTRL_P1_SP1 (1 << 3)
+
#define GPCH0_LSB 0x57
#define GPCH0_MSB 0x58
+#define TWL6032_GPCH0_LSB 0x3b
+
+#define TWL6032_GPSELECT_ISB 0x35
+
+#define USB_PRODUCT_ID_LSB 0x02
+
+#define TWL6030_GPADC_VBAT_CHNL 0x07
+#define TWL6032_GPADC_VBAT_CHNL 0x12
+
+#define TWL6030_GPADC_CTRL 0x2e
+#define TWL6032_GPADC_CTRL2 0x2f
+#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2)
+#define GPADC_CTRL_SCALER_DIV4 (1 << 3)
+
+#define TWL6030_VBAT_MULT 40 * 1000
+#define TWL6032_VBAT_MULT 25 * 1000
+
+#define TWL6030_VBAT_SHIFT (10 + 3)
+#define TWL6032_VBAT_SHIFT (12 + 2)
+
+enum twl603x_chip_type{
+ chip_TWL6030,
+ chip_TWL6032,
+ chip_TWL603X_cnt
+};
+
+struct twl6030_data{
+ u8 chip_type;
+ u8 adc_rbase;
+ u8 adc_ctrl;
+ u8 adc_enable;
+ int vbat_mult;
+ int vbat_shift;
+};
+
/* Functions to read and write from TWL6030 */
static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{
projects / karo-tx-uboot.git / commitdiff