From: Gabe Black <gabeblack@chromium.org>
Date: Tue, 27 Nov 2012 21:08:06 +0000 (+0000)
Subject: x86: Allow excluding reset vector code from u-boot
X-Git-Tag: v2013.01-rc2~103^2~7
X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=b16f521a5e87208cebbd17964452e11704416c3f

x86: Allow excluding reset vector code from u-boot

When running from coreboot we don't want this code.

This version works by ifdef-ing out all of the code that would go
into those sections and all the code that refers to it. The sections are
then empty, and the linker will either leave them empty for the loader
to ignore or remove them entirely.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/Makefile b/Makefile
index c01afc9f6f..19ac8f5b8a 100644
--- a/Makefile
+++ b/Makefile
@@ -231,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
diff --git a/README b/README
index 67ff03a120..b9a36856d9 100644
--- a/README
+++ b/README
@@ -3664,6 +3664,10 @@ Low Level (hardware related) configuration options:
 		be used if available. These functions may be faster under some
 		conditions but may increase the binary size.
 
+- CONFIG_X86_NO_RESET_VECTOR
+		If defined, the x86 reset vector code is excluded. You will need
+		to do this when U-Boot is running from Coreboot.
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 7f1fc188cb..be27dd9e2b 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -28,12 +28,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	= start.o start16.o resetvec.o
+START-y	= start.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += resetvec.o start16.o
 COBJS	= interrupts.o cpu.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
+START	:= $(addprefix $(obj),$(START-y) $(RESET_OBJS-))
 
 all:	$(obj).depend $(START) $(LIB)
 
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
index a1ecefafc6..0c6f0e31d8 100644
--- a/arch/x86/cpu/u-boot.lds
+++ b/arch/x86/cpu/u-boot.lds
@@ -86,6 +86,8 @@ SECTIONS
 	__bios_start = LOADADDR(.bios);
 	__bios_size = SIZEOF(.bios);
 
+#ifndef CONFIG_X86_NO_RESET_VECTOR
+
 	/*
 	 * The following expressions place the 16-bit Real-Mode code and
 	 * Reset Vector at the end of the Flash ROM
@@ -95,4 +97,5 @@ SECTIONS
 
 	. = RESET_VEC_LOC;
 	.resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); }
+#endif
 }