From: Albert ARIBAUD Date: Fri, 26 Oct 2012 05:00:28 +0000 (+0200) Subject: Merge remote-tracking branch 'u-boot-ti/master' X-Git-Tag: v2013.01-rc1~73^2~11 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=c68436fa427a69ea308d74c410067507d6c7103b;hp=c7d35bef255dedb3ec3856982f042dde514676b0 Merge remote-tracking branch 'u-boot-ti/master' --- diff --git a/.gitignore b/.gitignore index d91e91b1e6..1ac43f2825 100644 --- a/.gitignore +++ b/.gitignore @@ -38,6 +38,7 @@ /u-boot.sha1 /u-boot.dis /u-boot.lds +/u-boot.lst /u-boot.ubl /u-boot.ais /u-boot.dtb diff --git a/MAINTAINERS b/MAINTAINERS index c0fff0e40c..1b2da9421a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -214,9 +214,7 @@ Siddarth Gore Paul Gortmaker sbc8349 MPC8349 - sbc8540 MPC8540 sbc8548 MPC8548 - sbc8560 MPC8560 sbc8641d MPC8641D Frank Gottschling diff --git a/Makefile b/Makefile index 08eecbbbcd..328347d177 100644 --- a/Makefile +++ b/Makefile @@ -260,7 +260,8 @@ LIBS-y += drivers/net/npe/libnpe.o endif LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o -LIBS-y += fs/cramfs/libcramfs.o \ +LIBS-y += fs/cbfs/libcbfs.o \ + fs/cramfs/libcramfs.o \ fs/ext4/libext4fs.o \ fs/fat/libfat.o \ fs/fdos/libfdos.o \ @@ -533,9 +534,10 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \ + UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ + sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\ + cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ + $$UNDEF_LST $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot endif @@ -568,8 +570,12 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -$(obj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates u-boot.lst, +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) +$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend $(MAKE) -C nand_spl/board/$(BOARDDIR) all @@ -808,6 +814,7 @@ clean: $(obj)board/matrix_vision/*/bootscript.img \ $(obj)board/voiceblue/eeprom \ $(obj)u-boot.lds \ + $(obj)include/u-boot.lst \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h @@ -841,8 +848,10 @@ clobber: tidy @rm -f $(obj)u-boot.dtb @rm -f $(obj)u-boot.sb @rm -f $(obj)u-boot.spr - @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map} - @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map} + @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} + @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} + @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} + @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} @rm -f $(obj)MLO @rm -f $(obj)tools/xway-swap-bytes @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c diff --git a/README b/README index df4aed14e4..69da2b86ba 100644 --- a/README +++ b/README @@ -363,6 +363,12 @@ The following options need to be configured: ICache only when Code runs from RAM. - 85xx CPU Options: + CONFIG_SYS_PPC64 + + Specifies that the core is a 64-bit PowerPC implementation (implements + the "64" category of the Power ISA). This is necessary for ePAPR + compliance, among other possible reasons. + CONFIG_SYS_FSL_TBCLK_DIV Defines the core time base clock divider ratio compared to the @@ -1084,7 +1090,7 @@ The following options need to be configured: CONFIG_CALXEDA_XGMAC Support for the Calxeda XGMAC device - CONFIG_DRIVER_LAN91C96 + CONFIG_LAN91C96 Support for SMSC's LAN91C96 chips. CONFIG_LAN91C96_BASE @@ -1094,7 +1100,7 @@ The following options need to be configured: CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing - CONFIG_DRIVER_SMC91111 + CONFIG_SMC91111 Support for SMSC's LAN91C111 chip CONFIG_SMC91111_BASE @@ -1316,6 +1322,13 @@ The following options need to be configured: This will also enable the command "fatwrite" enabling the user to write files to FAT. +CBFS (Coreboot Filesystem) support + CONFIG_CMD_CBFS + + Define this to enable support for reading from a Coreboot + filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls + and cbfsload. + - Keyboard Support: CONFIG_ISA_KEYBOARD diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index dc6ba34082..008ae891ca 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -48,9 +48,11 @@ SECTIONS .got : { *(.got) } . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); __bss_start = .; diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index f8ea38c03d..6dc681a313 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -50,9 +50,10 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index afd3381e16..f3bd5e7367 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -50,9 +50,10 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 1d8efb213b..9979c30853 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -47,6 +47,11 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + .u_boot_list : { + #include + } + . = ALIGN(4); __image_copy_end = .; _end = .; diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 7199de4af1..81d954f2de 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS . = ALIGN(4); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index e49ca0c552..227aaff1e6 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -49,9 +49,11 @@ SECTIONS . = ALIGN(4); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/arch/arm/imx-common/cmd_bmode.c b/arch/arm/imx-common/cmd_bmode.c index 02fe72ed7f..ddc14b099e 100644 --- a/arch/arm/imx-common/cmd_bmode.c +++ b/arch/arm/imx-common/cmd_bmode.c @@ -24,6 +24,7 @@ #include #include #include +#include static const struct boot_mode *modes[2]; @@ -103,9 +104,11 @@ void add_board_boot_modes(const struct boot_mode *p) int size; char *dest; - if (__u_boot_cmd_bmode.usage) { - free(__u_boot_cmd_bmode.usage); - __u_boot_cmd_bmode.usage = NULL; + cmd_tbl_t *entry = ll_entry_get(cmd_tbl_t, bmode, cmd); + + if (entry->usage) { + free(entry->usage); + entry->usage = NULL; } modes[0] = p; @@ -114,6 +117,6 @@ void add_board_boot_modes(const struct boot_mode *p) dest = malloc(size); if (dest) { create_usage(dest); - __u_boot_cmd_bmode.usage = dest; + entry->usage = dest; } } diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index f8088fe21a..2b9af93806 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -34,7 +34,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index eac3800729..2ba98bca7d 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -37,7 +37,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ ulong bi_arch_number; /* unique id for this board */ ulong bi_boot_params; /* where this board expects params */ unsigned long bi_arm_freq; /* arm frequency */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 99cb54b8d8..92cad9a6eb 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -57,13 +57,6 @@ #include #endif -#ifdef CONFIG_DRIVER_SMC91111 -#include "../drivers/net/smc91111.h" -#endif -#ifdef CONFIG_DRIVER_LAN91C96 -#include "../drivers/net/lan91c96.h" -#endif - DECLARE_GLOBAL_DATA_PTR; ulong monitor_flash_len; @@ -613,16 +606,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* enable exceptions */ enable_interrupts(); - /* Perform network card initialisation if necessary */ -#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) - /* XXX: this needs to be moved to board init */ - if (getenv("ethaddr")) { - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - smc_set_mac_addr(enetaddr); - } -#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds index 0e532f234e..0b16d2a883 100644 --- a/arch/avr32/cpu/u-boot.lds +++ b/arch/avr32/cpu/u-boot.lds @@ -47,11 +47,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { - KEEP(*(.u_boot_cmd)) + + . = ALIGN(4); + .u_boot_list : { + #include } - __u_boot_cmd_end = .; . = ALIGN(4); _got = .; diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h index 7878bb185a..bf661e23be 100644 --- a/arch/avr32/include/asm/global_data.h +++ b/arch/avr32/include/asm/global_data.h @@ -33,7 +33,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long stack_end; /* highest stack address */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h index 1d2959a2ad..97bbbdef6d 100644 --- a/arch/avr32/include/asm/u-boot.h +++ b/arch/avr32/include/asm/u-boot.h @@ -23,7 +23,7 @@ #define __ASM_U_BOOT_H__ 1 typedef struct bd_info { - unsigned long bi_baudrate; + unsigned int bi_baudrate; unsigned char bi_phy_id[4]; unsigned long bi_board_number; void *bi_boot_params; diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 9d3b76e15a..e3287c486b 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -272,8 +272,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds index 2b8d285e1f..58db838fb0 100644 --- a/arch/blackfin/cpu/u-boot.lds +++ b/arch/blackfin/cpu/u-boot.lds @@ -112,11 +112,9 @@ SECTIONS CONSTRUCTORS } >ram_data - .u_boot_cmd : - { - ___u_boot_cmd_start = .; - *(.u_boot_cmd) - ___u_boot_cmd_end = .; + + .u_boot_list : { + #include } >ram_data .text_l1 : diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index 290a9e7662..d91e5a40d3 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -41,7 +41,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; unsigned long board_type; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/blackfin/include/asm/u-boot.h b/arch/blackfin/include/asm/u-boot.h index df81183e81..7abd6c2a32 100644 --- a/arch/blackfin/include/asm/u-boot.h +++ b/arch/blackfin/include/asm/u-boot.h @@ -29,7 +29,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ phys_size_t bi_memsize; /* size of DRAM memory in bytes */ diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index e47b606e87..9fbbea0d9b 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -78,7 +78,7 @@ static void display_global_data(void) printf(" gd: %p\n", gd); printf(" |-flags: %lx\n", gd->flags); printf(" |-board_type: %lx\n", gd->board_type); - printf(" |-baudrate: %lu\n", gd->baudrate); + printf(" |-baudrate: %u\n", gd->baudrate); printf(" |-have_console: %lx\n", gd->have_console); printf(" |-ram_size: %lx\n", gd->ram_size); printf(" |-env_addr: %lx\n", gd->env_addr); diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c index e23b20df91..1928eb384e 100644 --- a/arch/m68k/cpu/mcf5227x/cpu_init.c +++ b/arch/m68k/cpu/mcf5227x/cpu_init.c @@ -31,6 +31,7 @@ #include #include #include +#include /* * Breath some life into the CPU... @@ -41,12 +42,13 @@ */ void cpu_init_f(void) { - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - pll_t *pll = (pll_t *)MMAP_PLL; + fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; #if !defined(CONFIG_CF_SBF) + scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + pll_t *pll = (pll_t *)MMAP_PLL; + /* Workaround, must place before fbcs */ out_be32(&pll->psr, 0x12); diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index c5096a80c2..a683778127 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -485,7 +485,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index e6a69ab470..05f17231b2 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -247,7 +247,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index ee17792cb3..f5e55dd965 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -307,7 +307,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index fe98d76474..583ed1d41a 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -261,7 +261,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf5445x/config.mk b/arch/m68k/cpu/mcf5445x/config.mk index 61a731eeff..0c48783e4c 100644 --- a/arch/m68k/cpu/mcf5445x/config.mk +++ b/arch/m68k/cpu/mcf5445x/config.mk @@ -4,6 +4,8 @@ # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# Copyright 2011-2012 Freescale Semiconductor, Inc. +# # See file CREDITS for list of people who contributed to this # project. # @@ -24,7 +26,15 @@ # PLATFORM_RELFLAGS += -ffixed-d7 -msep-data + +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg)) + +ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x))) +PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC +else PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC +endif ifneq (,$(findstring -linux-,$(shell $(CC) --version))) ifneq (,$(findstring GOT,$(shell $(LD) --help))) diff --git a/arch/m68k/cpu/mcf5445x/cpu.c b/arch/m68k/cpu/mcf5445x/cpu.c index adfc708c35..b612cdaea1 100644 --- a/arch/m68k/cpu/mcf5445x/cpu.c +++ b/arch/m68k/cpu/mcf5445x/cpu.c @@ -39,6 +39,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { rcm_t *rcm = (rcm_t *) (MMAP_RCM); udelay(1000); + out_8(&rcm->rcr, RCM_RCR_FRCRSTOUT); + udelay(10000); setbits_8(&rcm->rcr, RCM_RCR_SOFTRST); /* we don't return! */ @@ -74,6 +76,21 @@ int checkcpu(void) case 0x4f: id = 54450; break; + case 0x9F: + id = 54410; + break; + case 0xA0: + id = 54415; + break; + case 0xA1: + id = 54416; + break; + case 0xA2: + id = 54417; + break; + case 0xA3: + id = 54418; + break; } if (id) { diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c index 3f9209ff19..6e947d06f9 100644 --- a/arch/m68k/cpu/mcf5445x/cpu_init.c +++ b/arch/m68k/cpu/mcf5445x/cpu_init.c @@ -31,6 +31,7 @@ #include #include #include +#include #if defined(CONFIG_CMD_NET) #include @@ -38,37 +39,11 @@ #include #endif -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f(void) +void init_fbcs(void) { - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); + fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; - /* FlexBus */ - out_8(&gpio->par_be, - GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | - GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); - out_8(&gpio->par_fbctl, - GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | - GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); - -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); @@ -106,6 +81,145 @@ void cpu_init_f(void) out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); #endif +} + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + +#ifdef CONFIG_MCF5441x + scm_t *scm = (scm_t *) MMAP_SCM; + pm_t *pm = (pm_t *) MMAP_PM; + + /* Disable Switch */ + *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0; + + /* Disable core watchdog */ + out_be16(&scm->cwcr, 0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE | + GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW | + GPIO_PAR_FBCTL_TA_TA); + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + + /* eDMA */ + out_8(&pm->pmcr0, 17); + + /* INTR0 - INTR2 */ + out_8(&pm->pmcr0, 18); + out_8(&pm->pmcr0, 19); + out_8(&pm->pmcr0, 20); + + /* I2C */ + out_8(&pm->pmcr0, 22); + out_8(&pm->pmcr1, 4); + out_8(&pm->pmcr1, 7); + + /* DTMR0 - DTMR3*/ + out_8(&pm->pmcr0, 28); + out_8(&pm->pmcr0, 29); + out_8(&pm->pmcr0, 30); + out_8(&pm->pmcr0, 31); + + /* PIT0 - PIT3 */ + out_8(&pm->pmcr0, 32); + out_8(&pm->pmcr0, 33); + out_8(&pm->pmcr0, 34); + out_8(&pm->pmcr0, 35); + + /* Edge Port */ + out_8(&pm->pmcr0, 36); + out_8(&pm->pmcr0, 37); + + /* USB OTG */ + out_8(&pm->pmcr0, 44); + /* USB Host */ + out_8(&pm->pmcr0, 45); + + /* ESDHC */ + out_8(&pm->pmcr0, 51); + + /* ENET0 - ENET1 */ + out_8(&pm->pmcr0, 53); + out_8(&pm->pmcr0, 54); + + /* NAND */ + out_8(&pm->pmcr0, 63); + +#ifdef CONFIG_SYS_I2C_0 + out_8(&gpio->par_cani2c, 0xF0); + /* I2C0 pull up */ + out_be16(&gpio->pcr_b, 0x003C); + /* I2C0 max speed */ + out_8(&gpio->srcr_cani2c, 0x03); +#endif +#ifdef CONFIG_SYS_I2C_2 + /* I2C2 */ + out_8(&gpio->par_ssi0h, 0xA0); + /* I2C2, UART7 */ + out_8(&gpio->par_ssi0h, 0xA8); + /* UART7 */ + out_8(&gpio->par_ssi0l, 0x2); + /* UART8, UART9 */ + out_8(&gpio->par_cani2c, 0xAA); + /* UART4, UART0 */ + out_8(&gpio->par_uart0, 0xAF); + /* UART5, UART1 */ + out_8(&gpio->par_uart1, 0xAF); + /* UART6, UART2 */ + out_8(&gpio->par_uart2, 0xAF); + /* I2C2 pull up */ + out_be16(&gpio->pcr_h, 0xF000); +#endif +#ifdef CONFIG_SYS_I2C_5 + /* I2C5 */ + out_8(&gpio->par_uart1, 0x0A); + /* I2C5 pull up */ + out_be16(&gpio->pcr_e, 0x0003); + out_be16(&gpio->pcr_f, 0xC000); +#endif + + /* Lowest slew rate for UART0,1,2 */ + out_8(&gpio->srcr_uart, 0x00); +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x + scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + + out_be32(&scm1->mpr, 0x77777777); + out_be32(&scm1->pacra, 0); + out_be32(&scm1->pacrb, 0); + out_be32(&scm1->pacrc, 0); + out_be32(&scm1->pacrd, 0); + out_be32(&scm1->pacre, 0); + out_be32(&scm1->pacrf, 0); + out_be32(&scm1->pacrg, 0); + + /* FlexBus */ + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | + GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); + +#ifdef CONFIG_FSL_I2C + out_be16(&gpio->par_feci2c, + GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); +#endif +#endif /* CONFIG_MCF5445x */ + + /* FlexBus Chipselect */ + init_fbcs(); /* * now the flash base address is no longer at 0 (Newer ColdFire family @@ -115,11 +229,6 @@ void cpu_init_f(void) if (CONFIG_SYS_CS0_BASE != 0) setvbr(CONFIG_SYS_CS0_BASE); -#ifdef CONFIG_FSL_I2C - out_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); -#endif - icache_enable(); } @@ -142,9 +251,95 @@ int cpu_init_r(void) void uart_port_conf(int port) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; +#endif /* Setup Ports: */ switch (port) { +#ifdef CONFIG_MCF5441x + case 0: + /* UART0 */ + out_8(&pm->pmcr0, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD); + break; + case 1: + /* UART1 */ + out_8(&pm->pmcr0, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD); + break; + case 2: + /* UART2 */ + out_8(&pm->pmcr0, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD); + break; + case 3: + /* UART3 */ + out_8(&pm->pmcr0, 27); + clrbits_8(&gpio->par_dspi0, + ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK)); + setbits_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD); + break; + case 4: + /* UART4 */ + out_8(&pm->pmcr1, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD); + break; + case 5: + /* UART5 */ + out_8(&pm->pmcr1, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD); + break; + case 6: + /* UART6 */ + out_8(&pm->pmcr1, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD); + break; + case 7: + /* UART7 */ + out_8(&pm->pmcr1, 27); + clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK); + clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK); + setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD); + setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD); + break; + case 8: + /* UART8 */ + out_8(&pm->pmcr0, 28); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD); + break; + case 9: + /* UART9 */ + out_8(&pm->pmcr1, 29); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD); + break; +#endif +#ifdef CONFIG_MCF5445x case 0: clrbits_8(&gpio->par_uart, GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); @@ -177,6 +372,7 @@ void uart_port_conf(int port) GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); #endif break; +#endif /* CONFIG_MCF5445x */ } } @@ -186,6 +382,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) gpio_t *gpio = (gpio_t *) MMAP_GPIO; struct fec_info_s *info = (struct fec_info_s *)dev->priv; +#ifdef CONFIG_MCF5445x if (setclear) { #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY if (info->iobase == CONFIG_SYS_FEC0_IOBASE) @@ -223,6 +420,21 @@ int fecpin_setclear(struct eth_device *dev, int setclear) #endif } } +#endif /* CONFIG_MCF5445x */ + +#ifdef CONFIG_MCF5441x + if (setclear) { + out_8(&gpio->par_fec, 0x03); + out_8(&gpio->srcr_fec, 0x0F); + clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK, + GPIO_PAR_SIMP0H_DAT_GPIO); + clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK, + GPIO_PDDR_G4_OUTPUT); + clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK); + + } else + clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK); +#endif return 0; } #endif @@ -232,10 +444,24 @@ void cfspi_port_conf(void) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5445x out_8(&gpio->par_dspi, GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | GPIO_PAR_DSPI_SCK_SCK); +#endif + +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; + + out_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT | + GPIO_PAR_DSPI0_SCK_DSPI0SCK); + out_8(&gpio->srcr_dspiow, 3); + + /* DSPI0 */ + out_8(&pm->pmcr0, 23); +#endif } int cfspi_claim_bus(uint bus, uint cs) @@ -249,6 +475,7 @@ int cfspi_claim_bus(uint bus, uint cs) /* Clear FIFO and resume transfer */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -271,6 +498,20 @@ int cfspi_claim_bus(uint bus, uint cs) setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + switch (cs) { + case 0: + clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK); + setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0); + break; + case 1: + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + break; + } +#endif return 0; } @@ -283,6 +524,7 @@ void cfspi_release_bus(uint bus, uint cs) /* Clear FIFO */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -300,5 +542,11 @@ void cfspi_release_bus(uint bus, uint cs) clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + if (cs == 1) + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); +#endif } #endif diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c index 073b7efafb..55d1c488a3 100644 --- a/arch/m68k/cpu/mcf5445x/speed.c +++ b/arch/m68k/cpu/mcf5445x/speed.c @@ -57,8 +57,10 @@ void clock_enter_limp(int lpdiv) /* Round divider down to nearest power of two */ for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; +#ifdef CONFIG_MCF5445x /* Apply the divider to the system clock */ clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); +#endif /* Enable Limp Mode */ setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); @@ -81,19 +83,76 @@ void clock_exit_limp(void) ; } -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) +#ifdef CONFIG_MCF5441x +void setup_5441x_clocks(void) { + ccm_t *ccm = (ccm_t *)MMAP_CCM; + pll_t *pll = (pll_t *)MMAP_PLL; + int temp, vco = 0, bootmod_ccr, pdr; + + bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14; + + switch (bootmod_ccr) { + case 0: + out_be32(&pll->pcr, 0x00000013); + out_be32(&pll->pdr, 0x00e70c61); + clock_exit_limp(); + break; + case 2: + break; + case 3: + break; + } + + /*Change frequency for Modelo SER1 USB host*/ +#ifdef CONFIG_LOW_MCFCLK + temp = in_be32(&pll->pcr); + temp &= ~0x3f; + temp |= 5; + out_be32(&pll->pcr, temp); + + temp = in_be32(&pll->pdr); + temp &= ~0x001f0000; + temp |= 0x00040000; + out_be32(&pll->pdr, temp); + __asm__("tpf"); +#endif + setbits_be16(&ccm->misccr2, 0x02); + + vco = ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) * + CONFIG_SYS_INPUT_CLKSRC; + gd->vco_clk = vco; + + gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ + + pdr = in_be32(&pll->pdr); + temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + gd->flb_clk = vco / temp; /* FlexBus clock */ + gd->flb_clk >>= 1; + if (in_be16(ccm->misccr2) & 2) /* fsys/4 */ + gd->flb_clk >>= 1; + + temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + +} +#endif + +#ifdef CONFIG_MCF5445x +void setup_5445x_clocks(void) +{ ccm_t *ccm = (ccm_t *)MMAP_CCM; pll_t *pll = (pll_t *)MMAP_PLL; int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; int pllmult_pci[] = { 12, 6, 16, 8 }; - int vco = 0, bPci, temp, fbtemp, pcrvalue; + int vco = 0, temp, fbtemp, pcrvalue; int *pPllmult = NULL; u16 fbpll_mask; +#ifdef CONFIG_PCI + int bPci; +#endif #ifdef CONFIG_M54455EVB u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3); @@ -105,14 +164,16 @@ int get_clocks(void) ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { pPllmult = &pllmult_pci[0]; fbpll_mask = 3; /* 11b */ +#ifdef CONFIG_PCI bPci = 1; +#endif } else { pPllmult = &pllmult_nopci[0]; fbpll_mask = 7; /* 111b */ #ifdef CONFIG_PCI gd->pci_clk = 0; -#endif bPci = 0; +#endif } #ifdef CONFIG_M54455EVB @@ -212,6 +273,22 @@ int get_clocks(void) #endif } +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif +} +#endif + +/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ +int get_clocks(void) +{ +#ifdef CONFIG_MCF5441x + setup_5441x_clocks(); +#endif +#ifdef CONFIG_MCF5445x + setup_5445x_clocks(); +#endif + #ifdef CONFIG_FSL_I2C gd->i2c1_clk = gd->bus_clk; #endif diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 99060141d8..5fc944d2f3 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -2,6 +2,9 @@ * Copyright (C) 2003 Josef Baumgartner * Based on code from Bernhard Kuhn * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -21,8 +24,10 @@ * MA 02111-1307 USA */ +#include #include #include +#include #include "version.h" #include @@ -43,8 +48,9 @@ addl #60,%sp; /* space for 15 regs */ \ rte; -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) #endif @@ -55,10 +61,15 @@ * These vectors are to catch any un-intended traps. */ _vectors: -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) INITSP: .long 0 /* Initial SP */ +#ifdef CONFIG_CF_SBF INITPC: .long ASM_DRAMINIT /* Initial PC */ +#endif +#ifdef CONFIG_SYS_NAND_BOOT +INITPC: .long ASM_DRAMINIT_N /* Initial PC */ +#endif #else @@ -95,7 +106,7 @@ vector1D: .long _FAULT /* Autovector Level 5 */ vector1E: .long _FAULT /* Autovector Level 6 */ vector1F: .long _FAULT /* Autovector Level 7 */ -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) /* TRAP #0 - #15 */ vector20_2F: @@ -138,16 +149,26 @@ vector192_255: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT #endif -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ asm_sbf_img_hdr: .long 0x00000000 /* checksum, not yet implemented */ - .long 0x00030000 /* image length */ + .long 0x00040000 /* image length */ .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ asm_dram_init: move.w #0x2700,%sr /* Mask off Interrupt */ +#ifdef CONFIG_SYS_NAND_BOOT + /* for assembly stack */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- +#endif + +#ifdef CONFIG_CF_SBF move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 movec %d0, %VBR @@ -180,7 +201,90 @@ asm_dram_init: move.l #(CONFIG_SYS_CS0_CTRL), (%a1) move.l #0xFC008004, %a1 move.l #(CONFIG_SYS_CS0_MASK), (%a1) +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_MCF5441x + /* TC: enable all peripherals, + in the future only enable certain peripherals */ + move.l #0xFC04002D, %a1 +#if defined(CONFIG_CF_SBF) + move.b #23, (%a1) /* dspi */ +#endif + move.b #46, (%a1) /* DDR */ + + /* slew settings */ + move.l #0xEC094060, %a1 + move.b #0, (%a1) + + /* use vco instead of cpu*2 clock for ddr clock */ + move.l #0xEC09001A, %a1 + move.w #0xE01D, (%a1) + + /* DDR settings */ + move.l #0xFC0B8180, %a1 + move.l #0x00000000, (%a1) + move.l #0x40000000, (%a1) + + move.l #0xFC0B81AC, %a1 + move.l #0x01030203, (%a1) + + move.l #0xFC0B8000, %a1 + move.l #0x01010101, (%a1)+ /* 0x00 */ + move.l #0x00000101, (%a1)+ /* 0x04 */ + move.l #0x01010100, (%a1)+ /* 0x08 */ + move.l #0x01010000, (%a1)+ /* 0x0C */ + move.l #0x00010101, (%a1)+ /* 0x10 */ + move.l #0xFC0B8018, %a1 + move.l #0x00010100, (%a1)+ /* 0x18 */ + move.l #0x00000001, (%a1)+ /* 0x1C */ + move.l #0x01000001, (%a1)+ /* 0x20 */ + move.l #0x00000100, (%a1)+ /* 0x24 */ + move.l #0x00010001, (%a1)+ /* 0x28 */ + move.l #0x00000200, (%a1)+ /* 0x2C */ + move.l #0x01000002, (%a1)+ /* 0x30 */ + move.l #0x00000000, (%a1)+ /* 0x34 */ + move.l #0x00000100, (%a1)+ /* 0x38 */ + move.l #0x02000100, (%a1)+ /* 0x3C */ + move.l #0x02000407, (%a1)+ /* 0x40 */ + move.l #0x02030007, (%a1)+ /* 0x44 */ + move.l #0x02000100, (%a1)+ /* 0x48 */ + move.l #0x0A030203, (%a1)+ /* 0x4C */ + move.l #0x00020708, (%a1)+ /* 0x50 */ + move.l #0x00050008, (%a1)+ /* 0x54 */ + move.l #0x04030002, (%a1)+ /* 0x58 */ + move.l #0x00000004, (%a1)+ /* 0x5C */ + move.l #0x020A0000, (%a1)+ /* 0x60 */ + move.l #0x0C00000E, (%a1)+ /* 0x64 */ + move.l #0x00002004, (%a1)+ /* 0x68 */ + move.l #0x00000000, (%a1)+ /* 0x6C */ + move.l #0x00100010, (%a1)+ /* 0x70 */ + move.l #0x00100010, (%a1)+ /* 0x74 */ + move.l #0x00000000, (%a1)+ /* 0x78 */ + move.l #0x07990000, (%a1)+ /* 0x7C */ + move.l #0xFC0B80A0, %a1 + move.l #0x00000000, (%a1)+ /* 0xA0 */ + move.l #0x00C80064, (%a1)+ /* 0xA4 */ + move.l #0x44520002, (%a1)+ /* 0xA8 */ + move.l #0x00C80023, (%a1)+ /* 0xAC */ + move.l #0xFC0B80B4, %a1 + move.l #0x0000C350, (%a1) /* 0xB4 */ + move.l #0xFC0B80E0, %a1 + move.l #0x04000000, (%a1)+ /* 0xE0 */ + move.l #0x03000304, (%a1)+ /* 0xE4 */ + move.l #0x40040000, (%a1)+ /* 0xE8 */ + move.l #0xC0004004, (%a1)+ /* 0xEC */ + move.l #0x0642C000, (%a1)+ /* 0xF0 */ + move.l #0x00000642, (%a1)+ /* 0xF4 */ + move.l #0xFC0B8024, %a1 + tpf + move.l #0x01000100, (%a1) /* 0x24 */ + + move.l #0x2000, %d1 + jsr asm_delay +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x /* Dram Initialization a1, a2, and d0 */ /* mscr sdram */ move.l #0xFC0A4074, %a1 @@ -203,7 +307,9 @@ dramsz_loop: add.l #1, %d1 cmp.l #1, %d2 bne dramsz_loop - +#ifdef CONFIG_SYS_NAND_BOOT + beq asm_nand_chk_status +#endif /* SDRAM Chip 0 and 1 */ move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) or.l %d1, (%a1) @@ -275,7 +381,9 @@ dramsz_loop: move.l #2000, %d1 jsr asm_delay +#endif /* CONFIG_MCF5445x */ +#ifdef CONFIG_CF_SBF /* * DSPI Initialization * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h @@ -286,15 +394,28 @@ dramsz_loop: */ /* Enable pins for DSPI mode - chip-selects are enabled later */ asm_dspi_init: +#ifdef CONFIG_MCF5441x + move.l #0xEC09404E, %a1 + move.l #0xEC09404F, %a2 + move.b #0xFF, (%a1) + move.b #0x80, (%a2) +#endif + +#ifdef CONFIG_MCF5445x move.l #0xFC0A4063, %a0 move.b #0x7F, (%a0) - +#endif /* Configure DSPI module */ move.l #0xFC05C000, %a0 move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ move.l #0xFC05C00C, %a0 +#ifdef CONFIG_MCF5441x + move.l #0x3E000016, (%a0) +#endif +#ifdef CONFIG_MCF5445x move.l #0x3E000011, (%a0) +#endif move.l #0xFC05C034, %a2 /* dtfr */ move.l #0xFC05C03B, %a3 /* drfr */ @@ -379,19 +500,148 @@ asm_dspi_rd_status: move.b (%a3), %d1 rts +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_SYS_NAND_BOOT + /* copy 4 boot pages to dram as soon as possible */ + /* each page is 996 bytes (1056 total with 60 ECC bytes */ + move.l #0x00000000, %a1 /* src */ + move.l #TEXT_BASE, %a2 /* dst */ + move.l #0x3E0, %d0 /* sz in long */ + +asm_boot_nand_copy: + move.l (%a1)+, (%a2)+ + subq.l #1, %d0 + bne asm_boot_nand_copy + + /* jump to memory and execute */ + move.l #(asm_nand_init), %a0 + jmp (%a0) + +asm_nand_init: + /* exit nand boot-mode */ + move.l #0xFC0FFF30, %a1 + or.l #0x00000040, %d1 + move.l %d1, (%a1) + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) + + /* NAND port configuration */ + move.l #0xEC094048, %a1 + move.b #0xFD, (%a1)+ + move.b #0x5F, (%a1)+ + move.b #0x04, (%a1)+ + + /* reset nand */ + move.l #0xFC0FFF38, %a1 /* isr */ + move.l #0x000e0000, (%a1) + move.l #0xFC0FFF08, %a2 + move.l #0x00000000, (%a2)+ /* car */ + move.l #0x11000000, (%a2)+ /* rar */ + move.l #0x00000000, (%a2)+ /* rpt */ + move.l #0x00000000, (%a2)+ /* rai */ + move.l #0xFC0FFF2c, %a2 /* cfg */ + move.l #0x00000000, (%a2)+ /* secsz */ + move.l #0x000e0681, (%a2)+ + move.l #0xFC0FFF04, %a2 /* cmd2 */ + move.l #0xFF404001, (%a2) + move.l #0x000e0000, (%a1) + + move.l #0x2000, %d1 + jsr asm_delay + + /* setup nand */ + move.l #0xFC0FFF00, %a1 + move.l #0x30700000, (%a1)+ /* cmd1 */ + move.l #0x007EF000, (%a1)+ /* cmd2 */ + + move.l #0xFC0FFF2C, %a1 + move.l #0x00000841, (%a1)+ /* secsz */ + move.l #0x000e0681, (%a1)+ /* cfg */ + + move.l #100, %d4 /* 100 pages ~200KB */ + move.l #4, %d2 /* start at 4 */ + move.l #0xFC0FFF04, %a0 /* cmd2 */ + move.l #0xFC0FFF0C, %a1 /* rar */ + move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + +asm_nand_read: + move.l #0x11000000, %d0 /* rar */ + or.l %d2, %d0 + move.l %d0, (%a1) + add.l #1, %d2 + + move.l (%a0), %d0 /* cmd2 */ + or.l #1, %d0 + move.l %d0, (%a0) + + move.l #0x200, %d1 + jsr asm_delay + +asm_nand_chk_status: + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + and.l #0x40000000, %d0 + tst.l %d0 + beq asm_nand_chk_status + + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + or.l #0x000E0000, %d0 + move.l %d0, (%a4) + + move.l #0x200, %d3 + move.l #0xFC0FC000, %a3 /* buf 1 */ +asm_nand_copy: + move.l (%a3)+, (%a2)+ + subq.l #1, %d3 + bgt asm_nand_copy + + subq.l #1, %d4 + bgt asm_nand_read + + /* jump to memory and execute */ + move.l #(TEXT_BASE + 0x400), %a0 + jmp (%a0) + +#endif /* CONFIG_SYS_NAND_BOOT */ asm_delay: nop subq.l #1, %d1 bne asm_delay rts -#endif /* CONFIG_CF_SBF */ +#endif /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */ .text . = 0x400 .globl _start _start: -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) nop nop move.w #0x2700,%sr /* Mask off Interrupt */ @@ -418,12 +668,15 @@ _start: movec %d0, %ACR1 movec %d0, %ACR2 movec %d0, %ACR3 +#else + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 +#endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- -#endif move.l #__got_start, %a5 /* put relocation table address to a5 */ diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index ec65cae3d8..d99747b7fa 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -164,8 +164,8 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ - bsr cpu_init_f /* run low-level CPU init code (from flash) */ - bsr board_init_f /* run low-level board init code (from flash) */ + jbsr cpu_init_f /* run low-level CPU init code (from flash) */ + jbsr board_init_f /* run low-level board init code (from flash) */ /* board_init_f() does not return */ diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index 5c9bb30835..f9e2d15f43 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -1,7 +1,7 @@ /* * ColdFire cache * - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. + * Copyright 2004-2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -37,10 +37,9 @@ #if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) #define CONFIG_CF_V4 -#if defined(CONFIG_MCF5441x) +#elif defined(CONFIG_MCF5441x) #define CONFIG_CF_V4E /* Four Extra ACRn */ #endif -#endif /* ***** CACR ***** */ /* V2 Core */ @@ -87,7 +86,7 @@ #endif /* CONFIG_CF_V3 */ /* V4 Core */ -#ifdef CONFIG_CF_V4 +#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) #define CF_CACR_DEC (1 << 31) #define CF_CACR_DW (1 << 30) @@ -113,7 +112,7 @@ #define CF_CACR_IDSP (1 << 7) #define CF_CACR_EUSP (1 << 5) -#ifdef CONFIG_MCF5445x +#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441x) #define CF_CACR_IVO (1 << 20) #define CF_CACR_SPA (1 << 14) #else @@ -148,7 +147,7 @@ #endif /* CONFIG_CF_V2 */ /* V4 Core */ -#ifdef CONFIG_CF_V4 +#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) #define CF_ACR_AMM (1 << 10) #define CF_ACR_SP (1 << 3) #endif /* CONFIG_CF_V4 */ diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h index cd55b83c52..0cdb11cf99 100644 --- a/arch/m68k/include/asm/global_data.h +++ b/arch/m68k/include/asm/global_data.h @@ -34,7 +34,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; #ifdef CONFIG_PCI diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index e83ce08d57..2aab463a90 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -1,7 +1,7 @@ /* * ColdFire Internal Memory Map and Defines * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright 2004-2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -318,6 +318,47 @@ #define CONFIG_SYS_NUM_IRQS (128) #endif /* CONFIG_M5329 && CONFIG_M5373 */ +#if defined(CONFIG_M54418) +#include +#include + +#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) +#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) + +#if (CONFIG_SYS_UART_PORT < 4) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + \ + (CONFIG_SYS_UART_PORT * 0x4000)) +#else +#define CONFIG_SYS_UART_BASE (MMAP_UART4 + \ + ((CONFIG_SYS_UART_PORT - 4) * 0x4000)) +#endif + +#define MMAP_DSPI MMAP_DSPI0 +#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0) +#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1) +#define CONFIG_SYS_TMRPND_REG (((int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0) +#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1) +#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33) +#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK) +#define CONFIG_SYS_TMRINTR_PRI (6) +#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0) +#define CONFIG_SYS_PIT_BASE (MMAP_PIT1) +#define CONFIG_SYS_PIT_PRESCALE (6) +#endif + +#define CONFIG_SYS_INTR_BASE (MMAP_INTC0) +#define CONFIG_SYS_NUM_IRQS (128) + +#endif /* CONFIG_M54418 */ + #if defined(CONFIG_M54451) || defined(CONFIG_M54455) #include #include diff --git a/arch/m68k/include/asm/immap_5441x.h b/arch/m68k/include/asm/immap_5441x.h new file mode 100644 index 0000000000..300f4d2868 --- /dev/null +++ b/arch/m68k/include/asm/immap_5441x.h @@ -0,0 +1,387 @@ +/* + * MCF5441x Internal Memory Map + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5441X__ +#define __IMMAP_5441X__ + +/* Module Base Addresses */ +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_CAN0 0xFC020000 +#define MMAP_CAN1 0xFC024000 +#define MMAP_I2C1 0xFC038000 +#define MMAP_DSPI1 0xFC03C000 +#define MMAP_SCM 0xFC040000 +#define MMAP_PM 0xFC04002C +#define MMAP_EDMA 0xFC044000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_INTC2 0xFC050000 +#define MMAP_IACK 0xFC054000 +#define MMAP_I2C0 0xFC058000 +#define MMAP_DSPI0 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_UART3 0xFC06C000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_EPORT0 0xFC090000 +#define MMAP_ADC 0xFC094000 +#define MMAP_DAC0 0xFC098000 +#define MMAP_DAC1 0xFC09C000 +#define MMAP_RRTC 0xFC0A8000 +#define MMAP_SIM 0xFC0AC000 +#define MMAP_USBOTG 0xFC0B0000 +#define MMAP_USBEHCI 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI0 0xFC0BC000 +#define MMAP_PLL 0xFC0C0000 +#define MMAP_RNG 0xFC0C4000 +#define MMAP_SSI1 0xFC0C8000 +#define MMAP_ESDHC 0xFC0CC000 +#define MMAP_FEC0 0xFC0D4000 +#define MMAP_FEC1 0xFC0D8000 +#define MMAP_L2_SW0 0xFC0DC000 +#define MMAP_L2_SW1 0xFC0E0000 + +#define MMAP_NFC_RAM 0xFC0FC000 +#define MMAP_NFC 0xFC0FF000 + +#define MMAP_1WIRE 0xEC008000 +#define MMAP_I2C2 0xEC010000 +#define MMAP_I2C3 0xEC014000 +#define MMAP_I2C4 0xEC018000 +#define MMAP_I2C5 0xEC01C000 +#define MMAP_DSPI2 0xEC038000 +#define MMAP_DSPI3 0xEC03C000 +#define MMAP_UART4 0xEC060000 +#define MMAP_UART5 0xEC064000 +#define MMAP_UART6 0xEC068000 +#define MMAP_UART7 0xEC06C000 +#define MMAP_UART8 0xEC070000 +#define MMAP_UART9 0xEC074000 +#define MMAP_RCM 0xEC090000 +#define MMAP_CCM 0xEC090000 +#define MMAP_GPIO 0xEC094000 + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Serial Boot Facility (SBF) */ +typedef struct sbf { + u8 resv0[0x18]; + u16 sbfsr; /* Serial Boot Facility Status */ + u8 resv1[0x6]; + u16 sbfcr; /* Serial Boot Facility Control */ +} sbf_t; + +/* Reset Controller Module (RCM) */ +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +/* Chip Configuration Module (CCM) */ +typedef struct ccm { + u8 ccm_resv0[0x4]; /* 0x00 */ + u16 ccr; /* 0x04 Chip Configuration */ + u8 resv1[0x2]; /* 0x06 */ + u16 rcon; /* 0x08 Reset Configuration */ + u16 cir; /* 0x0A Chip Identification */ + u8 resv2[0x2]; /* 0x0C */ + u16 misccr; /* 0x0E Miscellaneous Control */ + u16 cdrh; /* 0x10 Clock Divider */ + u16 cdrl; /* 0x12 Clock Divider */ + u16 uocsr; /* 0x14 USB On-the-Go Controller Status */ + u16 uhcsr; /* 0x16 */ + u16 misccr3; /* 0x18 */ + u16 misccr2; /* 0x1A */ + u16 adctsr; /* 0x1C */ + u16 dactsr; /* 0x1E */ + u16 sbfsr; /* 0x20 */ + u16 sbfcr; /* 0x22 */ + u32 fnacr; /* 0x24 */ +} ccm_t; + +/* General Purpose I/O Module (GPIO) */ +typedef struct gpio { + u8 podr_a; /* 0x00 */ + u8 podr_b; /* 0x01 */ + u8 podr_c; /* 0x02 */ + u8 podr_d; /* 0x03 */ + u8 podr_e; /* 0x04 */ + u8 podr_f; /* 0x05 */ + u8 podr_g; /* 0x06 */ + u8 podr_h; /* 0x07 */ + u8 podr_i; /* 0x08 */ + u8 podr_j; /* 0x09 */ + u8 podr_k; /* 0x0A */ + u8 rsvd0; /* 0x0B */ + + u8 pddr_a; /* 0x0C */ + u8 pddr_b; /* 0x0D */ + u8 pddr_c; /* 0x0E */ + u8 pddr_d; /* 0x0F */ + u8 pddr_e; /* 0x10 */ + u8 pddr_f; /* 0x11 */ + u8 pddr_g; /* 0x12 */ + u8 pddr_h; /* 0x13 */ + u8 pddr_i; /* 0x14 */ + u8 pddr_j; /* 0x15 */ + u8 pddr_k; /* 0x16 */ + u8 rsvd1; /* 0x17 */ + + u8 ppdsdr_a; /* 0x18 */ + u8 ppdsdr_b; /* 0x19 */ + u8 ppdsdr_c; /* 0x1A */ + u8 ppdsdr_d; /* 0x1B */ + u8 ppdsdr_e; /* 0x1C */ + u8 ppdsdr_f; /* 0x1D */ + u8 ppdsdr_g; /* 0x1E */ + u8 ppdsdr_h; /* 0x1F */ + u8 ppdsdr_i; /* 0x20 */ + u8 ppdsdr_j; /* 0x21 */ + u8 ppdsdr_k; /* 0x22 */ + u8 rsvd2; /* 0x23 */ + + u8 pclrr_a; /* 0x24 */ + u8 pclrr_b; /* 0x25 */ + u8 pclrr_c; /* 0x26 */ + u8 pclrr_d; /* 0x27 */ + u8 pclrr_e; /* 0x28 */ + u8 pclrr_f; /* 0x29 */ + u8 pclrr_g; /* 0x2A */ + u8 pclrr_h; /* 0x2B */ + u8 pclrr_i; /* 0x2C */ + u8 pclrr_j; /* 0x2D */ + u8 pclrr_k; /* 0x2E */ + u8 rsvd3; /* 0x2F */ + + u16 pcr_a; /* 0x30 */ + u16 pcr_b; /* 0x32 */ + u16 pcr_c; /* 0x34 */ + u16 pcr_d; /* 0x36 */ + u16 pcr_e; /* 0x38 */ + u16 pcr_f; /* 0x3A */ + u16 pcr_g; /* 0x3C */ + u16 pcr_h; /* 0x3E */ + u16 pcr_i; /* 0x40 */ + u16 pcr_j; /* 0x42 */ + u16 pcr_k; /* 0x44 */ + u16 rsvd4; /* 0x46 */ + + u8 par_fbctl; /* 0x48 */ + u8 par_be; /* 0x49 */ + u8 par_cs; /* 0x4A */ + u8 par_cani2c; /* 0x4B */ + u8 par_irqh; /* 0x4C */ + u8 par_irql; /* 0x4D */ + u8 par_dspi0; /* 0x4E */ + u8 par_dspiow; /* 0x4F */ + u8 par_timer; /* 0x50 */ + u8 par_uart2; /* 0x51 */ + u8 par_uart1; /* 0x52 */ + u8 par_uart0; /* 0x53 */ + u8 par_sdhch; /* 0x54 */ + u8 par_sdhcl; /* 0x55 */ + u8 par_simp0h; /* 0x56 */ + u8 par_simp1h; /* 0x57 */ + u8 par_ssi0h; /* 0x58 */ + u8 par_ssi0l; /* 0x59 */ + u8 par_dbg1h; /* 0x5A */ + u8 par_dbg0h; /* 0x5B */ + u8 par_dbgl; /* 0x5C */ + u8 rsvd5; /* 0x5D */ + u8 par_fec; /* 0x5E */ + u8 rsvd6; /* 0x5F */ + + u8 mscr_sdram; /* 0x60 */ + u8 rsvd7[3]; /* 0x61-0x63 */ + + u8 srcr_fb1; /* 0x64 */ + u8 srcr_fb2; /* 0x65 */ + u8 srcr_fb3; /* 0x66 */ + u8 srcr_fb4; /* 0x67 */ + u8 srcr_dspiow; /* 0x68 */ + u8 srcr_cani2c; /* 0x69 */ + u8 srcr_irq; /* 0x6A */ + u8 srcr_timer; /* 0x6B */ + u8 srcr_uart; /* 0x6C */ + u8 srcr_fec; /* 0x6D */ + u8 srcr_sdhc; /* 0x6E */ + u8 srcr_simp0; /* 0x6F */ + u8 srcr_ssi0; /* 0x70 */ + u8 rsvd8[3]; /* 0x71-0x73 */ + + u16 urts_pol; /* 0x74 */ + u16 ucts_pol; /* 0x76 */ + u16 utxd_wom; /* 0x78 */ + u32 urxd_wom; /* 0x7c */ + + u32 hcr1; /* 0x80 */ + u32 hcr0; /* 0x84 */ +} gpio_t; + +/* SDRAM Controller (SDRAMC) */ +typedef struct sdramc { + u32 cr00; /* 0x00 */ + u32 cr01; /* 0x04 */ + u32 cr02; /* 0x08 */ + u32 cr03; /* 0x0C */ + u32 cr04; /* 0x10 */ + u32 cr05; /* 0x14 */ + u32 cr06; /* 0x18 */ + u32 cr07; /* 0x1C */ + + u32 cr08; /* 0x20 */ + u32 cr09; /* 0x24 */ + u32 cr10; /* 0x28 */ + u32 cr11; /* 0x2C */ + u32 cr12; /* 0x30 */ + u32 cr13; /* 0x34 */ + u32 cr14; /* 0x38 */ + u32 cr15; /* 0x3C */ + + u32 cr16; /* 0x40 */ + u32 cr17; /* 0x44 */ + u32 cr18; /* 0x48 */ + u32 cr19; /* 0x4C */ + u32 cr20; /* 0x50 */ + u32 cr21; /* 0x54 */ + u32 cr22; /* 0x58 */ + u32 cr23; /* 0x5C */ + + u32 cr24; /* 0x60 */ + u32 cr25; /* 0x64 */ + u32 cr26; /* 0x68 */ + u32 cr27; /* 0x6C */ + u32 cr28; /* 0x70 */ + u32 cr29; /* 0x74 */ + u32 cr30; /* 0x78 */ + u32 cr31; /* 0x7C */ + + u32 cr32; /* 0x80 */ + u32 cr33; /* 0x84 */ + u32 cr34; /* 0x88 */ + u32 cr35; /* 0x8C */ + u32 cr36; /* 0x90 */ + u32 cr37; /* 0x94 */ + u32 cr38; /* 0x98 */ + u32 cr39; /* 0x9C */ + + u32 cr40; /* 0xA0 */ + u32 cr41; /* 0xA4 */ + u32 cr42; /* 0xA8 */ + u32 cr43; /* 0xAC */ + u32 cr44; /* 0xB0 */ + u32 cr45; /* 0xB4 */ + u32 cr46; /* 0xB8 */ + u32 cr47; /* 0xBC */ + u32 cr48; /* 0xC0 */ + u32 cr49; /* 0xC4 */ + u32 cr50; /* 0xC8 */ + u32 cr51; /* 0xCC */ + u32 cr52; /* 0xD0 */ + u32 cr53; /* 0xD4 */ + u32 cr54; /* 0xD8 */ + u32 cr55; /* 0xDC */ + u32 cr56; /* 0xE0 */ + u32 cr57; /* 0xE4 */ + u32 cr58; /* 0xE8 */ + u32 cr59; /* 0xEC */ + u32 cr60; /* 0xF0 */ + u32 cr61; /* 0xF4 */ + u32 cr62; /* 0xF8 */ + u32 cr63; /* 0xFC */ + + u32 rsvd3[32]; /* 0xF4-0x1A8 */ + + u32 rcrcr; /* 0x180 */ + u32 swrcr; /* 0x184 */ + u32 rcr; /* 0x188 */ + u32 msovr; /* 0x18C */ + u32 rcrdbg; /* 0x190 */ + u32 sl0adj; /* 0x194 */ + u32 sl1adj; /* 0x198 */ + u32 sl2adj; /* 0x19C */ + u32 sl3adj; /* 0x1A0 */ + u32 sl4adj; /* 0x1A4 */ + u32 flight_tm; /* 0x1A8 */ + u32 padcr; /* 0x1AC */ +} sdramc_t; + +/* Phase Locked Loop (PLL) */ +typedef struct pll { + u32 pcr; /* Control */ + u32 pdr; /* Divider */ + u32 psr; /* Status */ +} pll_t; + +typedef struct scm { + u8 rsvd1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 */ + u16 rsvd2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 */ + u8 rsvd3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B */ + u8 rsvd4[3]; /* 0x1C - 0x1E */ + u8 scmisr; /* 0x1F */ + u32 rsvd5; /* 0x20 - 0x23 */ + u32 bcr; /* 0x24 */ + u8 rsvd6[72]; /* 0x28 - 0x6F */ + u32 cfadr; /* 0x70 */ + u8 rsvd7; /* 0x74 */ + u8 cfier; /* 0x75 */ + u8 cfloc; /* 0x76 */ + u8 cfatr; /* 0x77 */ + u32 rsvd8; /* 0x78 - 0x7B */ + u32 cfdtr; /* 0x7C */ +} scm_t; + +typedef struct pm { + u8 pmsr0; /* */ + u8 pmcr0; + u8 pmsr1; + u8 pmcr1; + u32 pmhr0; + u32 pmlr0; + u32 pmhr1; + u32 pmlr1; +} pm_t; + +#endif /* __IMMAP_5441X__ */ diff --git a/arch/m68k/include/asm/m5441x.h b/arch/m68k/include/asm/m5441x.h new file mode 100644 index 0000000000..f5c82d4b56 --- /dev/null +++ b/arch/m68k/include/asm/m5441x.h @@ -0,0 +1,887 @@ +/* + * MCF5441X Internal Memory Map + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCF5441X__ +#define __MCF5441X__ + +/* Interrupt Controller (INTC) */ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_UART3 (29) +#define INT0_LO_I2C0 (30) +#define INT0_LO_DSPI0 (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_MACNET0_TXF (36) +#define INT0_HI_MACNET0_TXB (37) +#define INT0_HI_MACNET0_UN (38) +#define INT0_HI_MACNET0_RL (39) +#define INT0_HI_MACNET0_RXF (40) +#define INT0_HI_MACNET0_RXB (41) +#define INT0_HI_MACNET0_MII (42) +#define INT0_HI_MACNET0_LC (43) +/* not used 44 */ +#define INT0_HI_MACNET0_GRA (45) +#define INT0_HI_MACNET0_EBERR (46) +#define INT0_HI_MACNET0_BABT (47) +#define INT0_HI_MACNET0_BABR (48) +#define INT0_HI_MACNET1_TXF (49) +#define INT0_HI_MACNET1_TXB (50) +#define INT0_HI_MACNET1_UN (51) +#define INT0_HI_MACNET1_RL (52) +#define INT0_HI_MACNET1_RXF (53) +#define INT0_HI_MACNET1_RXB (54) +#define INT0_HI_MACNET1_MII (55) +#define INT0_HI_MACNET1_LC (56) +/* not used 57 */ +#define INT0_HI_MACNET1_GRA (58) +#define INT0_HI_MACNET1_EBERR (59) +#define INT0_HI_MACNET1_BABT (60) +#define INT0_HI_MACNET1_BABR (61) +#define INT0_HI_SCMIR (62) +#define INT0_HI_OW (63) + +#define INT1_LO_CAN0_IFG (0) +#define INT1_LO_CAN0_BOFF (1) +/* not used 2 */ +#define INT1_LO_CAN0_TXRXWRN (3) +#define INT1_LO_CAN1_IFG (4) +#define INT1_LO_CAN1_BOFF (5) +/* not used 6 */ +#define INT1_LO_CAN1_TXRXWRN (7) +#define INT1_LO_EDMA_16 (8) +#define INT1_LO_EDMA_17 (9) +#define INT1_LO_EDMA_18 (10) +#define INT1_LO_EDMA_19 (11) +#define INT1_LO_EDMA_20 (12) +#define INT1_LO_EDMA_21 (13) +#define INT1_LO_EDMA_22 (14) +#define INT1_LO_EDMA_23 (15) +#define INT1_LO_EDMA_24 (16) +#define INT1_LO_EDMA_25 (17) +#define INT1_LO_EDMA_26 (18) +#define INT1_LO_EDMA_27 (19) +#define INT1_LO_EDMA_28 (20) +#define INT1_LO_EDMA_29 (21) +#define INT1_LO_EDMA_30 (22) +#define INT1_LO_EDMA_31 (23) +#define INT1_LO_EDMA_32 (24) +#define INT1_LO_EDMA_33 (25) +#define INT1_LO_EDMA_34 (26) +#define INT1_LO_EDMA_35 (27) +#define INT1_LO_EDMA_36 (28) +#define INT1_LO_EDMA_37 (29) +#define INT1_LO_EDMA_38 (30) +#define INT1_LO_EDMA_39 (31) +#define INT1_LO_EDMA_40 (32) +#define INT1_HI_EDMA_41 (33) +#define INT1_HI_EDMA_42 (34) +#define INT1_HI_EDMA_43 (35) +#define INT1_HI_EDMA_44 (36) +#define INT1_HI_EDMA_45 (37) +#define INT1_HI_EDMA_46 (38) +#define INT1_HI_EDMA_47 (39) +#define INT1_HI_EDMA_48 (40) +#define INT1_HI_EDMA_49 (41) +#define INT1_HI_EDMA_50 (42) +#define INT1_HI_EDMA_51 (43) +#define INT1_HI_EDMA_52 (44) +#define INT1_HI_EDMA_53 (45) +#define INT1_HI_EDMA_54 (46) +#define INT1_HI_EDMA_55 (47) +#define INT1_HI_UART4 (48) +#define INT1_HI_UART5 (49) +#define INT1_HI_UART6 (50) +#define INT1_HI_UART7 (51) +#define INT1_HI_UART8 (52) +#define INT1_HI_UART9 (53) +#define INT1_HI_DSPI1 (54) +#define INT1_HI_DSPI2 (55) +#define INT1_HI_DSPI3 (56) +#define INT1_HI_I2C1 (57) +#define INT1_HI_I2C2 (58) +#define INT1_HI_I2C3 (59) +#define INT1_HI_I2C4 (60) +#define INT1_HI_I2C5 (61) + +#define INT2_LO_EDMA56_63 (0) +#define INT2_LO_PWM_SM0SR_CF (1) +#define INT2_LO_PWM_SM1SR_CF (2) +#define INT2_LO_PWM_SM2SR_CF (3) +#define INT2_LO_PWM_SM3SR_CF (4) +#define INT2_LO_PWM_SM0SR_RF (5) +#define INT2_LO_PWM_SM1SR_RF (6) +#define INT2_LO_PWM_SM2SR_RF (7) +#define INT2_LO_PWM_SM3SR_RF (8) +#define INT2_LO_PWM_FSR (9) +#define INT2_LO_PWM_SMSR_REF (10) +#define INT2_LO_PLL_SR_LOCF (11) +#define INT2_LO_PLL_SR_LOLF (12) +#define INT2_LO_PIT0_PIF (13) +#define INT2_LO_PIT1_PIF (14) +#define INT2_LO_PIT2_PIF (15) +#define INT2_LO_PIT3_PIF (16) +#define INT2_LO_USBOTG_USBSTS (17) +#define INT2_LO_USBH_USBSTS (18) +/* not used 19-20 */ +#define INT2_LO_SSI0 (21) +#define INT2_LO_SSI1 (22) +#define INT2_LO_NFC (23) +/* not used 24-25 */ +#define INT2_LO_RTC (26) +#define INT2_LO_CCM_UOCSR (27) +#define INT2_LO_RNG_EI (28) +#define INT2_LO_SIM1_DATA (29) +#define INT2_LO_SIM1 (30) +#define INT2_LO_SDHC (31) +/* not used 32-37 */ +#define INT2_HI_L2SW_BERR (38) +#define INT2_HI_L2SW_RXB (39) +#define INT2_HI_L2SW_RXF (40) +#define INT2_HI_L2SW_TXB (41) +#define INT2_HI_L2SW_TXF (42) +#define INT2_HI_L2SW_QM (43) +#define INT2_HI_L2SW_OD0 (44) +#define INT2_HI_L2SW_OD1 (45) +#define INT2_HI_L2SW_OD2 (46) +#define INT2_HI_L2SW_LRN (47) +#define INT2_HI_MACNET0_TS (48) +#define INT2_HI_MACNET0_WAKE (49) +#define INT2_HI_MACNET0_PLR (50) +/* not used 51-54 */ +#define INT2_HI_MACNET1_TS (51) +#define INT2_HI_MACNET1_WAKE (52) +#define INT2_HI_MACNET1_PLR (53) + +/* Serial Boot Facility (SBF) */ +#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) +#define SBF_SBFCR_FR (0x0010) + +/* Reset Controller Module (RCM) */ +#define RCM_RCR_SOFTRST (0x80) +#define RCM_RCR_FRCRSTOUT (0x40) + +#define RCM_RSR_SOFT (0x20) +#define RCM_RSR_LOC (0x10) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_LOL (0x01) + +/* Chip Configuration Module (CCM) */ +#define CCM_CCR_BOOTMOD (0xC000) +#define CCM_CCR_PLLMULT (0x0FC0) +#define CCM_CCR_BOOTPS (0x0030) +#define CCM_CCR_BOOTPS_32 (0x0000) +#define CCM_CCR_BOOTPS_16 (0x0020) +#define CCM_CCR_BOOTPS_8 (0x0010) +#define CCM_CCR_BOOTPS_ (0x0000) +#define CCM_CCR_ALESEL (0x0008) +#define CCM_CCR_OSCMOD (0x0004) +#define CCM_CCR_PLLMOD (0x0002) +#define CCM_CCR_BOOTMEM (0x0001) + +#define CCM_CIR_PIN_MASK (0xFFC0) +#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN_MCF54410 (0x9F<<6) +#define CCM_CIR_PIN_MCF54415 (0xA0<<6) +#define CCM_CIR_PIN_MCF54416 (0xA1<<6) +#define CCM_CIR_PIN_MCF54417 (0xA2<<6) +#define CCM_CIR_PIN_MCF54418 (0xA3<<6) + +#define CCM_MISCCR_PWM_EXTCLK(x) (((x)&(0x0003)<<14) +#define CCM_MISCCR_PWM_EXTCLK_MASK (0x3FFF) +#define CCM_MISCCR_PWM_EXTCLK_TMR0 (0x0000) +#define CCM_MISCCR_PWM_EXTCLK_TMR1 (0x4000) +#define CCM_MISCCR_PWM_EXTCLK_TMR2 (0x8000) +#define CCM_MISCCR_PWM_EXTCLK_TMR3 (0xC000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_BME (0x0800) +#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) +#define CCM_MISCCR_BMT_65536 (0) +#define CCM_MISCCR_BMT_32768 (1) +#define CCM_MISCCR_BMT_16384 (2) +#define CCM_MISCCR_BMT_8192 (3) +#define CCM_MISCCR_BMT_4096 (4) +#define CCM_MISCCR_BMT_2048 (5) +#define CCM_MISCCR_BMT_1024 (6) +#define CCM_MISCCR_BMT_512 (7) +#define CCM_MISCCR_SDHCSRC (0x0040) +#define CCM_MISCCR_SSI1SRC (0x0020) +#define CCM_MISCCR_SSI0SRC (0x0010) +#define CCM_MISCCR_USBHOC (0x0008) +#define CCM_MISCCR_USBOOC (0x0004) +#define CCM_MISCCR_USBPUE (0x0002) +#define CCM_MISCCR_USBSRC (0x0001) + +#define CCM_CDRH_SSI0DIV(x) (((x)&0x00FF)<<8) +#define CCM_CDRH_SSI0DIV_MASK (0x00FF) +#define CCM_CDRH_SSI1DIV(x) (((x)&0x00FF)) +#define CCM_CDRH_SSI1DIV_MASK (0xFF00) +#define CCM_CDRL_LPDIV(x) (((x)&0x000F)<<8) +#define CCM_CDRL_LPDIV_MASK (0xFF0F) +#define CCM_CDR_LPDIV(x) CCM_CDRL_LPDIV(x) + +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) + +#define CCM_UHCSR_DRV_VBUS (0x0010) +#define CCM_UHCSR_PWRFLT (0x0008) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UOMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) + +#define CCM_MISCCR3_TMR_ENET (0x1000) +#define CCM_MISCCR3_ENETCLK(x) (((x)&7)<<8) +#define CCM_MISCCR3_ENETCLK_MASK (0xF8FF) +#define CCM_MISCCR3_ENETCLK_MII (0x0700) +#define CCM_MISCCR3_ENETCLK_OSC (0x0600) +#define CCM_MISCCR3_ENETCLK_USB (0x0500) +#define CCM_MISCCR3_ENETCLK_TMR3 (0x0400) +#define CCM_MISCCR3_ENETCLK_TMR2 (0x0300) +#define CCM_MISCCR3_ENETCLK_TMR1 (0x0200) +#define CCM_MISCCR3_ENETCLK_TMR0 (0x0100) +#define CCM_MISCCR3_ENETCLK_INTBUS (0x0000) + +#define CCM_MISCCR2_EXTCLKBYP (0x8000) +#define CCM_MISCCR2_DDR2CLK (0x4000) +#define CCM_MISCCR2_RGPIO_HALF (0x2000) +#define CCM_MISCCR2_SWTSCR (0x1000) +#define CCM_MISCCR2_PLLMODE(x) (((x)&7)<<8) +#define CCM_MISCCR2_PLLMODE_MASK (0xF8FF) +#define CCM_MISCCR2_DCCBYP (0x0080) +#define CCM_MISCCR2_DAC1SEL (0x0040) +#define CCM_MISCCR2_DAC0SEL (0x0020) +#define CCM_MISCCR2_ADCEN (0x0010) +#define CCM_MISCCR2_ADC7SEL (0x0008) +#define CCM_MISCCR2_ADC3SEL (0x0004) +#define CCM_MISCCR2_FBHALF (0x0002) +#define CCM_MISCCR2_ULPI (0x0001) + +#define CCM_FNACR_PCR(x) (((x)&0x0F)<<24) +#define CCM_FNACR_PCR_MASK (0xF0FFFFFF) +#define CCM_FNACR_MCC(x) ((x)&0xFFFF) +#define CCM_FNACR_MCC_MASK (0xFFFF0000) + +/* General Purpose I/O Module (GPIO) */ +#define GPIO_PAR_FBCTL_ALE(x) (((x)&3)<<6) +#define GPIO_PAR_FBCTL_ALE_MASK (0x3F) +#define GPIO_PAR_FBCTL_ALE_FB_ALE (0xC0) +#define GPIO_PAR_FBCTL_ALE_FB_TS (0x80) +#define GPIO_PAR_FBCTL_ALE_GPIO (0x00) +#define GPIO_PAR_FBCTL_OE(x) (((x)&3)<<4) +#define GPIO_PAR_FBCTL_OE_MASK (0xCF) +#define GPIO_PAR_FBCTL_OE_FB_OE (0x30) +#define GPIO_PAR_FBCTL_OE_FB_TBST (0x20) +#define GPIO_PAR_FBCTL_OE_NFC_RE (0x20) +#define GPIO_PAR_FBCTL_OE_GPIO (0x00) +#define GPIO_PAR_FBCTL_FBCLK (0x08) +#define GPIO_PAR_FBCTL_RW (0x04) +#define GPIO_PAR_FBCTL_TA(x) ((x)&3) +#define GPIO_PAR_FBCTL_TA_MASK (0xFC) +#define GPIO_PAR_FBCTL_TA_TA (0x03) +#define GPIO_PAR_FBCTL_TA_NFC_RB (0x01) +#define GPIO_PAR_FBCTL_TA_GPIO (0x00) + +#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) +#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_BE3 (0xC0) +#define GPIO_PAR_BE_BE3_CS3 (0x80) +#define GPIO_PAR_BE_BE3_FB_A1 (0x40) +#define GPIO_PAR_BE_BE3_NFC_ALE (0x40) +#define GPIO_PAR_BE_BE3_GPIO (0x00) +#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) +#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_BE2 (0x30) +#define GPIO_PAR_BE_BE2_CS2 (0x20) +#define GPIO_PAR_BE_BE2_FB_A0 (0x10) +#define GPIO_PAR_BE_BE2_NFC_CLE (0x10) +#define GPIO_PAR_BE_BE2_GPIO (0x00) +#define GPIO_PAR_BE_BS1(x) (((x)&0x03)<<2) +#define GPIO_PAR_BE_BE1_MASK (0xF3) +#define GPIO_PAR_BE_BE1_BE1 (0x0C) +#define GPIO_PAR_BE_BE1_FB_TSZ1 (0x08) +#define GPIO_PAR_BE_BE1_GPIO (0x00) +#define GPIO_PAR_BE_BS0(x) ((x)&0x03) +#define GPIO_PAR_BE_BE0_MASK (0xFC) +#define GPIO_PAR_BE_BE0_BE0 (0x03) +#define GPIO_PAR_BE_BE0_FB_TSZ0 (0x02) +#define GPIO_PAR_BE_BE0_GPIO (0x00) + +#define GPIO_PAR_CS_CS5(x) (((x)&0x03)<<6) +#define GPIO_PAR_CS_CS5_MASK (0x3F) +#define GPIO_PAR_CS_CS5_CS5 (0xC0) +#define GPIO_PAR_CS_CS5_DACK1 (0x80) +#define GPIO_PAR_CS_CS5_GPIO (0x00) +#define GPIO_PAR_CS_CS4(x) (((x)&0x03)<<4) +#define GPIO_PAR_CS_CS4_MASK (0xCF) +#define GPIO_PAR_CS_CS4_CS4 (0x30) +#define GPIO_PAR_CS_CS4_DREQ1 (0x20) +#define GPIO_PAR_CS_CS4_GPIO (0x00) +#define GPIO_PAR_CS_CS1(x) (((x)&0x03)<<2) +#define GPIO_PAR_CS_CS1_MASK (0xF3) +#define GPIO_PAR_CS_CS1_CS1 (0x0C) +#define GPIO_PAR_CS_CS1_NFC_CE (0x04) +#define GPIO_PAR_CS_CS1_GPIO (0x00) +#define GPIO_PAR_CS_CS0_CS0 (0x01) + +#define GPIO_PAR_CANI2C_I2C0SCL(x) (((x)&0x03)<<6) +#define GPIO_PAR_CANI2C_I2C0SCL_MASK (0x3F) +#define GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL (0xC0) +#define GPIO_PAR_CANI2C_I2C0SCL_U8TXD (0x80) +#define GPIO_PAR_CANI2C_I2C0SCL_CAN0TX (0x40) +#define GPIO_PAR_CANI2C_I2C0SCL_GPIO (0x00) +#define GPIO_PAR_CANI2C_I2C0SDA(x) (((x)&0x03)<<4) +#define GPIO_PAR_CANI2C_I2C0SDA_MASK (0xCF) +#define GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA (0x30) +#define GPIO_PAR_CANI2C_I2C0SDA_U8RXD (0x20) +#define GPIO_PAR_CANI2C_I2C0SDA_CAN0RX (0x10) +#define GPIO_PAR_CANI2C_I2C0SDA_GPIO (0x00) +#define GPIO_PAR_CANI2C_CAN1TX(x) (((x)&0x03)<<2) +#define GPIO_PAR_CANI2C_CAN1TX_MASK (0xF3) +#define GPIO_PAR_CANI2C_CAN1TX_CAN1TX (0x0C) +#define GPIO_PAR_CANI2C_CAN1TX_U9TXD (0x08) +#define GPIO_PAR_CANI2C_CAN1TX_I2C1SCL (0x04) +#define GPIO_PAR_CANI2C_CAN1TX_GPIO (0x00) +#define GPIO_PAR_CANI2C_CAN1RX(x) ((x)&0x03) +#define GPIO_PAR_CANI2C_CAN1RX_MASK (0xFC) +#define GPIO_PAR_CANI2C_CAN1RX_CAN1RX (0x03) +#define GPIO_PAR_CANI2C_CAN1RX_U9RXD (0x02) +#define GPIO_PAR_CANI2C_CAN1RX_I2C1SDA (0x01) +#define GPIO_PAR_CANI2C_CAN1RX_GPIO (0x00) + +#define GPIO_PAR_IRQH_IRQ7 (0x10) +#define GPIO_PAR_IRQH_IRQ4(x) (((x)&0x03)<<2) +#define GPIO_PAR_IRQH_IRQ4_MASK (0xF3) +#define GPIO_PAR_IRQH_IRQ4_IRQ4 (0x0C) +#define GPIO_PAR_IRQH_IRQ4_DREQ0 (0x08) +#define GPIO_PAR_IRQH_IRQ4_GPIO (0x00) +#define GPIO_PAR_IRQH_IRQ1 (0x03) + +#define GPIO_PAR_IRQL_IRQ6(x) (((x)&0x03)<<6) +#define GPIO_PAR_IRQL_IRQ6_MASK (0x3F) +#define GPIO_PAR_IRQL_IRQ6_IRQ6 (0xC0) +#define GPIO_PAR_IRQL_IRQ6_USBCLKIN (0x40) +#define GPIO_PAR_IRQL_IRQ6_GPIO (0x00) +#define GPIO_PAR_IRQL_IRQ3(x) (((x)&0x03)<<4) +#define GPIO_PAR_IRQL_IRQ3_MASK (0xCF) +#define GPIO_PAR_IRQL_IRQ3_IRQ3 (0x30) +#define GPIO_PAR_IRQL_IRQ3_DSPI0_PCS3 (0x20) +#define GPIO_PAR_IRQL_IRQ3_USB1_VBUS_EN (0x10) +#define GPIO_PAR_IRQL_IRQ3_GPIO (0x00) +#define GPIO_PAR_IRQL_IRQ2(x) (((x)&0x03)<<2) +#define GPIO_PAR_IRQL_IRQ2_MASK (0xF3) +#define GPIO_PAR_IRQL_IRQ2_IRQ2 (0x0C) +#define GPIO_PAR_IRQL_IRQ2_DSPI0_PCS2 (0x08) +#define GPIO_PAR_IRQL_IRQ2_USB1_VBUS_OC (0x04) +#define GPIO_PAR_IRQL_IRQ2_GPIO (0x00) + +#define GPIO_PAR_DSPI0_SIN(x) (((x)&0x03)<<6) +#define GPIO_PAR_DSPI0_SIN_MASK (0x3F) +#define GPIO_PAR_DSPI0_SIN_DSPI0SIN (0xC0) +#define GPIO_PAR_DSPI0_SIN_SBF_DI (0xC0) +#define GPIO_PAR_DSPI0_SIN_U3RXD (0x80) +#define GPIO_PAR_DSPI0_SIN_SDHC_CMD (0x40) +#define GPIO_PAR_DSPI0_SIN_GPIO (0x00) +#define GPIO_PAR_DSPI0_SOUT(x) (((x)&0x03)<<4) +#define GPIO_PAR_DSPI0_SOUT_MASK (0xCF) +#define GPIO_PAR_DSPI0_SOUT_DSPI0SOUT (0x30) +#define GPIO_PAR_DSPI0_SOUT_SBF_DO (0x30) +#define GPIO_PAR_DSPI0_SOUT_U3TXD (0x20) +#define GPIO_PAR_DSPI0_SOUT_SDHC_DAT0 (0x10) +#define GPIO_PAR_DSPI0_SOUT_GPIO (0x00) +#define GPIO_PAR_DSPI0_SCK(x) (((x)&0x03)<<2) +#define GPIO_PAR_DSPI0_SCK_MASK (0xF3) +#define GPIO_PAR_DSPI0_SCK_DSPI0SCK (0x0C) +#define GPIO_PAR_DSPI0_SCK_SBF_CK (0x0C) +#define GPIO_PAR_DSPI0_SCK_I2C3SCL (0x08) +#define GPIO_PAR_DSPI0_SCK_SDHC_CLK (0x04) +#define GPIO_PAR_DSPI0_SCK_GPIO (0x00) +#define GPIO_PAR_DSPI0_PCS0(x) ((x)&0x03) +#define GPIO_PAR_DSPI0_PCS0_MASK (0xFC) +#define GPIO_PAR_DSPI0_PCS0_DSPI0PCS0 (0x03) +#define GPIO_PAR_DSPI0_PCS0_SS (0x03) +#define GPIO_PAR_DSPI0_PCS0_I2C3SDA (0x02) +#define GPIO_PAR_DSPI0_PCS0_SDHC_DAT3 (0x01) +#define GPIO_PAR_DSPI0_PCS0_GPIO (0x00) + +#define GPIO_PAR_DSPIOW_DSPI0PSC1 (0x80) +#define GPIO_PAR_DSPIOW_SBF_CS (0x80) +#define GPIO_PAR_DSPIOW_OWDAT (((x)&0x03)<<4) +#define GPIO_PAR_DSPIOW_OWDAT_MASK (0xCF) +#define GPIO_PAR_DSPIOW_OWDAT_OWDAT (0x30) +#define GPIO_PAR_DSPIOW_OWDAT_DACK0 (0x20) +#define GPIO_PAR_DSPIOW_OWDAT_GPIO (0x00) + +#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) +#define GPIO_PAR_TIMER_T3IN_EXTA3 (0xC0) +#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) +#define GPIO_PAR_TIMER_T3IN_USB0_VBUSEN (0x40) +#define GPIO_PAR_TIMER_T3IN_ULIPI_DIR (0x40) +#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) +#define GPIO_PAR_TIMER_T2IN_EXTA2 (0x30) +#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) +#define GPIO_PAR_TIMER_T2IN_SDHC_DAT2 (0x10) +#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) +#define GPIO_PAR_TIMER_T1IN_EXTA1 (0x0C) +#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) +#define GPIO_PAR_TIMER_T1IN_SDHC_DAT1 (0x04) +#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T0IN(x) ((x)&0x03) +#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) +#define GPIO_PAR_TIMER_T0IN_EXTA0 (0x03) +#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) +#define GPIO_PAR_TIMER_T0IN_USBO_VBUSOC (0x01) +#define GPIO_PAR_TIMER_T0IN_ULPI_NXT (0x01) +#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) + +#define GPIO_PAR_UART2_U2CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART2_U2CTS_MASK (0x3F) +#define GPIO_PAR_UART2_U2CTS_U2CTS (0xC0) +#define GPIO_PAR_UART2_U2CTS_U6TXD (0x80) +#define GPIO_PAR_UART2_U2CTS_SSI1_BCLK (0x40) +#define GPIO_PAR_UART2_U2CTS_GPIO (0x00) +#define GPIO_PAR_UART2_U2RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART2_U2RTS_MASK (0xCF) +#define GPIO_PAR_UART2_U2RTS_U2RTS (0x30) +#define GPIO_PAR_UART2_U2RTS_U6RXD (0x20) +#define GPIO_PAR_UART2_U2RTS_SSI1_FS (0x10) +#define GPIO_PAR_UART2_U2RTS_GPIO (0x00) +#define GPIO_PAR_UART2_U2RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART2_U2RXD_MASK (0xF3) +#define GPIO_PAR_UART2_U2RXD_U2RXD (0x0C) +#define GPIO_PAR_UART2_U2RXD_PWM_A3 (0x08) +#define GPIO_PAR_UART2_U2RXD_SSI1_RXD (0x04) +#define GPIO_PAR_UART2_U2RXD_GPIO (0x00) +#define GPIO_PAR_UART2_U2TXD(x) ((x)&0x03) +#define GPIO_PAR_UART2_U2TXD_MASK (0xFC) +#define GPIO_PAR_UART2_U2TXD_U2TXD (0x03) +#define GPIO_PAR_UART2_U2TXD_PWM_B3 (0x02) +#define GPIO_PAR_UART2_U2TXD_SSI1_TXD (0x01) +#define GPIO_PAR_UART2_U2TXD_GPIO (0x00) + +#define GPIO_PAR_UART1_U1CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART1_U1CTS_MASK (0x3F) +#define GPIO_PAR_UART1_U1CTS_U1CTS (0xC0) +#define GPIO_PAR_UART1_U1CTS_U5TXD (0x80) +#define GPIO_PAR_UART1_U1CTS_DSPI3_SCK (0x40) +#define GPIO_PAR_UART1_U1CTS_GPIO (0x00) +#define GPIO_PAR_UART1_U1RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART1_U1RTS_MASK (0xCF) +#define GPIO_PAR_UART1_U1RTS_U1RTS (0x30) +#define GPIO_PAR_UART1_U1RTS_U5RXD (0x20) +#define GPIO_PAR_UART1_U1RTS_DSPI3_PCS0 (0x10) +#define GPIO_PAR_UART1_U1RTS_GPIO (0x00) +#define GPIO_PAR_UART1_U1RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART1_U1RXD_MASK (0xF3) +#define GPIO_PAR_UART1_U1RXD_U1RXD (0x0C) +#define GPIO_PAR_UART1_U1RXD_I2C5SDA (0x08) +#define GPIO_PAR_UART1_U1RXD_DSPI3_SIN (0x04) +#define GPIO_PAR_UART1_U1RXD_GPIO (0x00) +#define GPIO_PAR_UART1_U1TXD(x) ((x)&0x03) +#define GPIO_PAR_UART1_U1TXD_MASK (0xFC) +#define GPIO_PAR_UART1_U1TXD_U1TXD (0x03) +#define GPIO_PAR_UART1_U1TXD_I2C5SCL (0x02) +#define GPIO_PAR_UART1_U1TXD_DSPI3_SOUT (0x01) +#define GPIO_PAR_UART1_U1TXD_GPIO (0x00) + +#define GPIO_PAR_UART0_U0CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART0_U0CTS_MASK (0x3F) +#define GPIO_PAR_UART0_U0CTS_U0CTS (0xC0) +#define GPIO_PAR_UART0_U0CTS_U4TXD (0x80) +#define GPIO_PAR_UART0_U0CTS_DSPI2_SCK (0x40) +#define GPIO_PAR_UART0_U0CTS_GPIO (0x00) +#define GPIO_PAR_UART0_U0RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART0_U0RTS_MASK (0xCF) +#define GPIO_PAR_UART0_U0RTS_U0RTS (0x30) +#define GPIO_PAR_UART0_U0RTS_U4RXD (0x20) +#define GPIO_PAR_UART0_U0RTS_DSPI2_PCS0 (0x10) +#define GPIO_PAR_UART0_U0RTS_GPIO (0x00) +#define GPIO_PAR_UART0_U0RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART0_U0RXD_MASK (0xF3) +#define GPIO_PAR_UART0_U0RXD_U0RXD (0x0C) +#define GPIO_PAR_UART0_U0RXD_I2C4SDA (0x08) +#define GPIO_PAR_UART0_U0RXD_DSPI2_SIN (0x04) +#define GPIO_PAR_UART0_U0RXD_GPIO (0x00) +#define GPIO_PAR_UART0_U0TXD(x) ((x)&0x03) +#define GPIO_PAR_UART0_U0TXD_MASK (0xFC) +#define GPIO_PAR_UART0_U0TXD_U0TXD (0x03) +#define GPIO_PAR_UART0_U0TXD_I2C4SCL (0x02) +#define GPIO_PAR_UART0_U0TXD_DSPI2_SOUT (0x01) +#define GPIO_PAR_UART0_U0TXD_GPIO (0x00) + +#define GPIO_PAR_SDHCH_DAT3(x) (((x)&0x03)<<6) +#define GPIO_PAR_SDHCH_DAT3_MASK (0x3F) +#define GPIO_PAR_SDHCH_DAT3_DAT3 (0xC0) +#define GPIO_PAR_SDHCH_DAT3_PWM_A1 (0x80) +#define GPIO_PAR_SDHCH_DAT3_DSPI1_PCS0 (0x40) +#define GPIO_PAR_SDHCH_DAT3_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT2(x) (((x)&0x03)<<4) +#define GPIO_PAR_SDHCH_DAT2_MASK (0xCF) +#define GPIO_PAR_SDHCH_DAT2_DAT2 (0x30) +#define GPIO_PAR_SDHCH_DAT2_PWM_B1 (0x20) +#define GPIO_PAR_SDHCH_DAT2_DSPI1_PCS2 (0x10) +#define GPIO_PAR_SDHCH_DAT2_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT1(x) (((x)&0x03)<<2) +#define GPIO_PAR_SDHCH_DAT1_MASK (0xF3) +#define GPIO_PAR_SDHCH_DAT1_DAT1 (0x0C) +#define GPIO_PAR_SDHCH_DAT1_PWM_A2 (0x08) +#define GPIO_PAR_SDHCH_DAT1_DSPI1_PCS1 (0x04) +#define GPIO_PAR_SDHCH_DAT1_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT0(x) ((x)&0x03) +#define GPIO_PAR_SDHCH_DAT0_MASK (0xFC) +#define GPIO_PAR_SDHCH_DAT0_DAT0 (0x03) +#define GPIO_PAR_SDHCH_DAT0_PWM_B2 (0x02) +#define GPIO_PAR_SDHCH_DAT0_DSPI1_SOUT (0x01) +#define GPIO_PAR_SDHCH_DAT0_GPIO (0x00) + +#define GPIO_PAR_SDHCL_CMD(x) (((x)&0x03)<<2) +#define GPIO_PAR_SDHCL_CMD_MASK (0xF3) +#define GPIO_PAR_SDHCL_CMD_CMD (0x0C) +#define GPIO_PAR_SDHCL_CMD_PWM_A0 (0x08) +#define GPIO_PAR_SDHCL_CMD_DSPI1_SIN (0x04) +#define GPIO_PAR_SDHCL_CMD_GPIO (0x00) +#define GPIO_PAR_SDHCL_CLK(x) ((x)&0x03) +#define GPIO_PAR_SDHCL_CLK_MASK (0xFC) +#define GPIO_PAR_SDHCL_CLK_CLK (0x03) +#define GPIO_PAR_SDHCL_CLK_PWM_B0 (0x02) +#define GPIO_PAR_SDHCL_CLK_DSPI1_SCK (0x01) +#define GPIO_PAR_SDHCL_CLK_GPIO (0x00) + +#define GPIO_PAR_SIMP0H_DAT(x) (((x)&0x03)<<6) +#define GPIO_PAR_SIMP0H_DAT_MASK (0x3F) +#define GPIO_PAR_SIMP0H_DAT_DAT (0xC0) +#define GPIO_PAR_SIMP0H_DAT_PWM_FAULT2 (0x80) +#define GPIO_PAR_SIMP0H_DAT_SDHC_DAT7 (0x40) +#define GPIO_PAR_SIMP0H_DAT_GPIO (0x00) +#define GPIO_PAR_SIMP0H_VEN(x) (((x)&0x03)<<4) +#define GPIO_PAR_SIMP0H_VEN_MASK (0xCF) +#define GPIO_PAR_SIMP0H_VEN_VEN (0x30) +#define GPIO_PAR_SIMP0H_VEN_PWM_FAULT0 (0x20) +#define GPIO_PAR_SIMP0H_VEN_GPIO (0x00) +#define GPIO_PAR_SIMP0H_RST(x) (((x)&0x03)<<2) +#define GPIO_PAR_SIMP0H_RST_MASK (0xF3) +#define GPIO_PAR_SIMP0H_RST_RST (0x0C) +#define GPIO_PAR_SIMP0H_RST_PWM_FORCE (0x08) +#define GPIO_PAR_SIMP0H_RST_SDHC_DAT6 (0x04) +#define GPIO_PAR_SIMP0H_RST_GPIO (0x00) +#define GPIO_PAR_SIMP0H_PD(x) ((x)&0x03) +#define GPIO_PAR_SIMP0H_PD_MASK (0xFC) +#define GPIO_PAR_SIMP0H_PD_PD (0x03) +#define GPIO_PAR_SIMP0H_PD_PWM_SYNC (0x02) +#define GPIO_PAR_SIMP0H_PD_SDHC_DAT5 (0x01) +#define GPIO_PAR_SIMP0H_PD_GPIO (0x00) + +#define GPIO_PAR_SIMP0L_CLK(x) ((x)&0x03) +#define GPIO_PAR_SIMP0L_CLK_MASK (0xFC) +#define GPIO_PAR_SIMP0L_CLK_CLK (0x03) +#define GPIO_PAR_SIMP0L_CLK_PWM_FAULT1 (0x02) +#define GPIO_PAR_SIMP0L_CLK_SDHC_DAT4 (0x01) +#define GPIO_PAR_SIMP0L_CLK_GPIO (0x00) + +#define GPIO_PAR_SSI0H_RXD(x) (((x)&0x03)<<6) +#define GPIO_PAR_SSI0H_RXD_MASK (0x3F) +#define GPIO_PAR_SSI0H_RXD_RXD (0xC0) +#define GPIO_PAR_SSI0H_RXD_I2C2SDA (0x80) +#define GPIO_PAR_SSI0H_RXD_SIM1_VEN (0x40) +#define GPIO_PAR_SSI0H_RXD_GPIO (0x00) +#define GPIO_PAR_SSI0H_TXD(x) (((x)&0x03)<<4) +#define GPIO_PAR_SSI0H_TXD_MASK (0xCF) +#define GPIO_PAR_SSI0H_TXD_TXD (0x30) +#define GPIO_PAR_SSI0H_TXD_I2C2SCL (0x20) +#define GPIO_PAR_SSI0H_TXD_SIM1_DAT (0x10) +#define GPIO_PAR_SSI0H_TXD_GPIO (0x00) +#define GPIO_PAR_SSI0H_FS(x) (((x)&0x03)<<2) +#define GPIO_PAR_SSI0H_FS_MASK (0xF3) +#define GPIO_PAR_SSI0H_FS_FS (0x0C) +#define GPIO_PAR_SSI0H_FS_U7TXD (0x08) +#define GPIO_PAR_SSI0H_FS_SIM1_RST (0x04) +#define GPIO_PAR_SSI0H_FS_GPIO (0x00) +#define GPIO_PAR_SSI0H_MCLK(x) ((x)&0x03) +#define GPIO_PAR_SSI0H_MCLK_MASK (0xFC) +#define GPIO_PAR_SSI0H_MCLK_MCLK (0x03) +#define GPIO_PAR_SSI0H_MCLK_SSI_CLKIN (0x02) +#define GPIO_PAR_SSI0H_MCLK_SIM1_CLK (0x01) +#define GPIO_PAR_SSI0H_MCLK_GPIO (0x00) + +#define GPIO_PAR_SSI0L_BCLK(x) ((x)&0x03) +#define GPIO_PAR_SSI0L_BCLK_MASK (0xFC) +#define GPIO_PAR_SSI0L_BCLK_BCLK (0x03) +#define GPIO_PAR_SSI0L_BCLK_U7RXD (0x02) +#define GPIO_PAR_SSI0L_BCLK_SIM1_PD (0x01) +#define GPIO_PAR_SSI0L_BCLK_GPIO (0x00) + +#define GPIO_PAR_DEBUGH1_DAT3 (0x40) +#define GPIO_PAR_DEBUGH1_DAT2 (0x10) +#define GPIO_PAR_DEBUGH1_DAT1 (0x04) +#define GPIO_PAR_DEBUGH1_DAT0 (0x01) + +#define GPIO_PAR_DEBUGH0_PST3 (0x40) +#define GPIO_PAR_DEBUGH0_PST2 (0x10) +#define GPIO_PAR_DEBUGH0_PST1 (0x04) +#define GPIO_PAR_DEBUGH0_PST0 (0x01) + +#define GPIO_PODR_G4_VAL (0x01 << 4) +#define GPIO_PODR_G4_MASK (0xff & ~GPIO_PODR_G4_VAL) +#define GPIO_PDDR_G4_OUTPUT (0x01 << 4) +#define GPIO_PDDR_G4_MASK (0xff & ~GPIO_PDDR_G4_OUTPUT) + +#define GPIO_PAR_DEBUGL_ALLPST (0x01) + +#define GPIO_PAR_FEC_FEC(x) ((x)&0x0F) +#define GPIO_PAR_FEC_FEC_MASK (0xF0) +#define GPIO_PAR_FEC_FEC_GPIO (0x0D) +#define GPIO_PAR_FEC_FEC_RMII1 (0x0C) +#define GPIO_PAR_FEC_FEC_RMII1FUL (0x0B) +#define GPIO_PAR_FEC_FEC_RMII_ULPI (0x0A) +#define GPIO_PAR_FEC_FEC_RMII0 (0x09) +#define GPIO_PAR_FEC_FEC_RMII0FUL_ULPI (0x08) +#define GPIO_PAR_FEC_FEC_RMII0FUL (0x07) +#define GPIO_PAR_FEC_FEC_RMII0_1FUL (0x06) +#define GPIO_PAR_FEC_FEC_RMII0FUL_1 (0x05) /* 0:Full 1: */ +/* Both 0&1: MDC, MDIO, COL & TXER - GPIO */ +#define GPIO_PAR_FEC_FEC_RMII0_1 (0x04) +#define GPIO_PAR_FEC_FEC_RMII0FUL_1FUL (0x03) +#define GPIO_PAR_FEC_FEC_MII (0x01) /* MDC & MDIO - GPIO */ +#define GPIO_PAR_FEC_FEC_MIIFUL (0x00) + + +/* TC: Need to edit here.... */ + +/* Mode Select Control */ +#define GPIO_MSCR_SDRAM_MSC(x) ((x)&0x03) +#define GPIO_MSCR_SDRAM_MSC_MASK (0xFC) + +/* Slew Rate Control */ + +#define GPIO_SRCR_FB3_FB3(x) ((x)&0x03) +#define GPIO_SRCR_FB3_FB3_MASK (0xFC) + +#define GPIO_SRCR_FB2_FB2(x) ((x)&0x03) +#define GPIO_SRCR_FB2_FB2_MASK (0xFC) + +#define GPIO_SRCR_FB1_FB1(x) ((x)&0x03) +#define GPIO_SRCR_FB1_FB1_MASK (0xFC) + +#define GPIO_SRCR_FB4_FB5(x) (((x)&0x03)<<2) +#define GPIO_SRCR_FB4_FB5_MASK (0xF3) +#define GPIO_SRCR_FB4_FB4(x) ((x)&0x03) +#define GPIO_SRCR_FB4_FB4_MASK (0xFC) + +#define GPIO_SRCR_DSPIOW_OWDAT(x) (((x)&0x03)<<4) +#define GPIO_SRCR_DSPIOW_OWDAT_MASK (0xCF) +#define GPIO_SRCR_DSPIOW_DSPI0(x) ((x)&0x03) +#define GPIO_SRCR_DSPIOW_DSPI0_MASK (0xFC) + +#define GPIO_SRCR_CANI2C_CAN1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_CANI2C_CAN1_MASK (0xF3) +#define GPIO_SRCR_CANI2C_I2C0(x) ((x)&0x03) +#define GPIO_SRCR_CANI2C_I2C0_MASK (0xFC) + +#define GPIO_SRCR_IRQ0_IRQ0(x) ((x)&0x03) +#define GPIO_SRCR_IRQ0_IRQ0_MASK (0xFC) + +#define GPIO_SRCR_TIMER_TMR3(x) (((x)&0x03)<<6) +#define GPIO_SRCR_TIMER_TMR3_MASK (0x3F) +#define GPIO_SRCR_TIMER_TMR2(x) (((x)&0x03)<<4) +#define GPIO_SRCR_TIMER_TMR2_MASK (0xCF) +#define GPIO_SRCR_TIMER_TMR1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_TIMER_TMR1_MASK (0xF3) +#define GPIO_SRCR_TIMER_TMR0(x) ((x)&0x03) +#define GPIO_SRCR_TIMER_TMR0_MASK (0xFC) + +#define GPIO_SRCR_UART_U2(x) (((x)&0x03)<<4) +#define GPIO_SRCR_UART_U2_MASK (0xCF) +#define GPIO_SRCR_UART_U1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_UART_U1_MASK (0xF3) +#define GPIO_SRCR_UART_U0(x) ((x)&0x03) +#define GPIO_SRCR_UART_U0_MASK (0xFC) + +#define GPIO_SRCR_FEC_RMII0(x) (((x)&0x03)<<2) +#define GPIO_SRCR_FEC_RMII0_MASK (0xF3) +#define GPIO_SRCR_FEC_RMII1(x) ((x)&0x03) +#define GPIO_SRCR_FEC_RMII1_MASK (0xFC) + +#define GPIO_SRCR_SDHC_SDHC(x) ((x)&0x03) +#define GPIO_SRCR_SDHC_SDHC_MASK (0xFC) + +#define GPIO_SRCR_SIM0_SIMP0(x) ((x)&0x03) +#define GPIO_SRCR_SIM0_SIMP0_MASK (0xFC) + +#define GPIO_SRCR_SSI0_SSI0(x) ((x)&0x03) +#define GPIO_SRCR_SSI0_SSI0_MASK (0xFC) + +#define GPIO_PCR_URTS_U2 (0x0004) +#define GPIO_PCR_URTS_U1 (0x0002) +#define GPIO_PCR_URTS_U0 (0x0001) + +#define GPIO_PCR_UCTS_U2 (0x0004) +#define GPIO_PCR_UCTS_U1 (0x0002) +#define GPIO_PCR_UCTS_U0 (0x0001) + +#define GPIO_UTXD_WOM_U9 (0x0200) +#define GPIO_UTXD_WOM_U8 (0x0100) +#define GPIO_UTXD_WOM_U7 (0x0080) +#define GPIO_UTXD_WOM_U6 (0x0040) +#define GPIO_UTXD_WOM_U5 (0x0020) +#define GPIO_UTXD_WOM_U4 (0x0010) +#define GPIO_UTXD_WOM_U3 (0x0008) +#define GPIO_UTXD_WOM_U2 (0x0004) +#define GPIO_UTXD_WOM_U1 (0x0002) +#define GPIO_UTXD_WOM_U0 (0x0001) + +#define GPIO_URXD_WOM_U9(x) (((x)&3)<<18) +#define GPIO_URXD_WOM_U9_MASK (0xFFF3FFFF) +#define GPIO_URXD_WOM_U8(x) (((x)&3)<<16) +#define GPIO_URXD_WOM_U8_MASK (0xFFFCFFFF) +#define GPIO_URXD_WOM_U7(x) (((x)&3)<<14) +#define GPIO_URXD_WOM_U7_MASK (0xFFFF3FFF) +#define GPIO_URXD_WOM_U6(x) (((x)&3)<<12) +#define GPIO_URXD_WOM_U6_MASK (0xFFFFCFFF) +#define GPIO_URXD_WOM_U5(x) (((x)&3)<<10) +#define GPIO_URXD_WOM_U5_MASK (0xFFFFF3FF) +#define GPIO_URXD_WOM_U4(x) (((x)&3)<<8) +#define GPIO_URXD_WOM_U4_MASK (0xFFFFFCFF) +#define GPIO_URXD_WOM_U3(x) (((x)&3)<<6) +#define GPIO_URXD_WOM_U3_MASK (0xFFFFFF3F) +#define GPIO_URXD_WOM_U2(x) (((x)&3)<<4) +#define GPIO_URXD_WOM_U2_MASK (0xFFFFFFCF) +#define GPIO_URXD_WOM_U1(x) (((x)&3)<<2) +#define GPIO_URXD_WOM_U1_MASK (0xFFFFFFF3) +#define GPIO_URXD_WOM_U0(x) ((x)&3) +#define GPIO_URXD_WOM_U0_MASK (0xFFFFFFFC) + +#define GPIO_HCR1_PG4_0(x) (((x)&0x1F)<<27) +#define GPIO_HCR1_PG4_0_MASK (0x07FFFFFF) +#define GPIO_HCR1_PF7_3(x) (((x)&0x1F)<<22) +#define GPIO_HCR1_PF7_3_MASK (0xF83FFFFF) +#define GPIO_HCR1_PE6_0(x) (((x)&0x7F)<<15) +#define GPIO_HCR1_PE6_0_MASK (0xFFC07FFF) +#define GPIO_HCR1_PD7_3(x) (((x)&0x1F)<<10) +#define GPIO_HCR1_PD7_3_MASK (0xFFFF83FF) +#define GPIO_HCR1_PC7_1(x) (((x)&0x7F)<<3) +#define GPIO_HCR1_PC7_1_MASK (0xFFFFFC07) +#define GPIO_HCR1_PB2_0(x) ((x)&7) +#define GPIO_HCR1_PB2_0_MASK (0xFFFFFFF8) + +#define GPIO_HCR0_PK3 (0x00000400) +#define GPIO_HCR0_PK0 (0x00000200) +#define GPIO_HCR0_PD2_0(x) (((x)&7)<<6) +#define GPIO_HCR0_PD2_0_MASK (0xFFFFFE3F) +#define GPIO_HCR0_PE7 (0x00000020) +#define GPIO_HCR0_PH7_3(x) ((x)&0x1F) +#define GPIO_HCR0_PH7_3_MASK(x) (0xFFFFFFE0) + +/* SDRAM Controller (SDRAMC) */ + +/* Phase Locked Loop (PLL) */ +#define PLL_CR_LOCIRQ (0x00040000) +#define PLL_CR_LOCRE (0x00020000) +#define PLL_CR_LOCEN (0x00010000) +#define PLL_CR_LOLIRQ (0x00004000) +#define PLL_CR_LOLRE (0x00002000) +#define PLL_CR_LOLEN (0x00001000) +#define PLL_CR_REFDIV(x) (((x)&7)<<8) +#define PLL_CR_REFDIV_MASK (0xFFFFF8FF) +#define PLL_CR_FBKDIV(x) ((x)&0x3F) +#define PLL_CR_FBKDIV_MASK (0xFFFFFFC0) +#define PLL_CR_FBKDIV_BITS (0x3F) + +#define PLL_DR_OUTDIV5(x) (((x)&0x1F)<<21) +#define PLL_DR_OUTDIV5_MASK (0xFC1FFFFF) +#define PLL_DR_OUTDIV5_BITS (0x03E00000) +#define PLL_DR_OUTDIV4(x) (((x)&0x1F)<<16) +#define PLL_DR_OUTDIV4_MASK (0xFFE0FFFF) +#define PLL_DR_OUTDIV4_BITS (0x001F0000) +#define PLL_DR_OUTDIV3(x) (((x)&0x1F)<<10) +#define PLL_DR_OUTDIV3_MASK (0xFFFF83FF) +#define PLL_DR_OUTDIV3_BITS (0x00007C00) +#define PLL_DR_OUTDIV2(x) (((x)&0x1F)<<5) +#define PLL_DR_OUTDIV2_MASK (0xFFFFFC1F) +#define PLL_DR_OUTDIV2_BITS (0x000003E0) +#define PLL_DR_OUTDIV1(x) ((x)&0x1F) +#define PLL_DR_OUTDIV1_MASK (0xFFFFFFE0) +#define PLL_DR_OUTDIV1_BITS (0x0000001F) + +#define PLL_SR_LOCF (0x00000200) +#define PLL_SR_LOC (0x00000100) +#define PLL_SR_LOLF (0x00000040) +#define PLL_SR_LOCKS (0x00000020) +#define PLL_SR_LOCK (0x00000010) +#define PLL_PSR_LOCK PLL_SR_LOCK /* compatible with 5x */ +#define PLL_SR_MODE(x) ((x)&7) +#define PLL_SR_MODE_MASK (0xFFFFFFF8) + +#endif /* __MCF5441X__ */ diff --git a/arch/m68k/include/asm/u-boot.h b/arch/m68k/include/asm/u-boot.h index 973c9ee098..8c7c554a46 100644 --- a/arch/m68k/include/asm/u-boot.h +++ b/arch/m68k/include/asm/u-boot.h @@ -58,7 +58,7 @@ typedef struct bd_info { unsigned long bi_vcofreq; /* vco Freq in MHz */ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ #endif - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 67c9a1382e..02d73fda61 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -387,7 +388,7 @@ board_init_f (ulong bootflag) */ void board_init_r (gd_t *id, ulong dest_addr) { - char *s; + char *s __maybe_unused; bd_t *bd; #ifndef CONFIG_ENV_IS_NOWHERE @@ -415,8 +416,8 @@ void board_init_r (gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index d033a2835b..4297b93443 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -50,12 +50,9 @@ SECTIONS __data_end = .; } - .u_boot_cmd ALIGN(0x4): - { - . = .; - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include } .bss ALIGN(0x4): diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index de3b8dbe92..2111c7cba2 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -35,7 +35,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h index a0b1dbf9e6..8d00658564 100644 --- a/arch/microblaze/include/asm/u-boot.h +++ b/arch/microblaze/include/asm/u-boot.h @@ -40,7 +40,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/mips/cpu/mips32/au1x00/Makefile b/arch/mips/cpu/mips32/au1x00/Makefile index dc58475f68..b9f895df5b 100644 --- a/arch/mips/cpu/mips32/au1x00/Makefile +++ b/arch/mips/cpu/mips32/au1x00/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o +COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o au1x00_ide.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/bmw/m48t59y.h b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c similarity index 59% rename from board/bmw/m48t59y.h rename to arch/mips/cpu/mips32/au1x00/au1x00_ide.c index 717300d957..932cdfb9bb 100644 --- a/board/bmw/m48t59y.h +++ b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c @@ -1,13 +1,7 @@ /* - * SGS M48-T59Y TOD/NVRAM Driver - * - * (C) Copyright 2000 + * (C) Copyright 2000-2011 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. - * - * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. - * * See file CREDITS for list of people who contributed to this * project. * @@ -25,33 +19,14 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA + * */ -#ifndef __M48_T59_Y_H -#define __M48_T59_Y_H - -/* - * M48 T59Y -Timekeeping Battery backed SRAM. - */ - -int m48_tod_init(void); - -int m48_tod_set(int year, - int month, - int day, - int hour, - int minute, - int second); - -int m48_tod_get(int *year, - int *month, - int *day, - int *hour, - int *minute, - int *second); - -int m48_tod_get_second(void); - -void m48_watchdog_arm(int usec); +#include +#include -#endif /*!__M48_T59_Y_H */ +/* AU1X00 swaps data in big-endian mode, enforce little-endian function */ +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + ide_input_data(dev, sect_buf, words); +} diff --git a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c index 0beac98fde..3e85b90cde 100644 --- a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c +++ b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c @@ -103,12 +103,6 @@ static void au1x00_serial_putc(const char c) *uart_tx = (u32)c; } -static void au1x00_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static int au1x00_serial_getc(void) { volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX); @@ -137,7 +131,7 @@ static struct serial_device au1x00_serial_drv = { .stop = NULL, .setbrg = au1x00_serial_setbrg, .putc = au1x00_serial_putc, - .puts = au1x00_serial_puts, + .puts = default_serial_puts, .getc = au1x00_serial_getc, .tstc = au1x00_serial_tstc, }; diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S index e683e8be8c..64dfad0263 100644 --- a/arch/mips/cpu/mips32/cache.S +++ b/arch/mips/cpu/mips32/cache.S @@ -85,17 +85,17 @@ LEAF(mips_init_icache) /* clear tag to invalidate */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 -1: cache_op Index_Store_Tag_I t0 +1: cache_op INDEX_STORE_TAG_I t0 PTR_ADDU t0, a2 bne t0, t1, 1b /* fill once, so data field parity is correct */ PTR_LI t0, INDEX_BASE -2: cache_op Fill t0 +2: cache_op FILL t0 PTR_ADDU t0, a2 bne t0, t1, 2b /* invalidate again - prudent but not strictly neccessary */ PTR_LI t0, INDEX_BASE -1: cache_op Index_Store_Tag_I t0 +1: cache_op INDEX_STORE_TAG_I t0 PTR_ADDU t0, a2 bne t0, t1, 1b 9: jr ra @@ -110,7 +110,7 @@ LEAF(mips_init_dcache) /* clear all tags */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 -1: cache_op Index_Store_Tag_D t0 +1: cache_op INDEX_STORE_TAG_D t0 PTR_ADDU t0, a2 bne t0, t1, 1b /* load from each line (in cached space) */ @@ -120,7 +120,7 @@ LEAF(mips_init_dcache) bne t0, t1, 2b /* clear all tags */ PTR_LI t0, INDEX_BASE -1: cache_op Index_Store_Tag_D t0 +1: cache_op INDEX_STORE_TAG_D t0 PTR_ADDU t0, a2 bne t0, t1, 1b 9: jr ra diff --git a/arch/mips/cpu/mips32/cpu.c b/arch/mips/cpu/mips32/cpu.c index 7b49e1b612..50bb248bd0 100644 --- a/arch/mips/cpu/mips32/cpu.c +++ b/arch/mips/cpu/mips32/cpu.c @@ -61,8 +61,8 @@ void flush_cache(ulong start_addr, ulong size) return; while (1) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); if (addr == aend) break; addr += lsize; @@ -76,7 +76,7 @@ void flush_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); while (1) { - cache_op(Hit_Writeback_Inv_D, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); if (addr == aend) break; addr += lsize; @@ -90,7 +90,7 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); while (1) { - cache_op(Hit_Invalidate_D, addr); + cache_op(HIT_INVALIDATE_D, addr); if (addr == aend) break; addr += lsize; diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c index 08949f4fb0..6f0e4f2520 100644 --- a/arch/mips/cpu/mips32/incaip/asc_serial.c +++ b/arch/mips/cpu/mips32/incaip/asc_serial.c @@ -236,14 +236,6 @@ static void asc_serial_putc(const char c) } } -static void asc_serial_puts(const char *s) -{ - while (*s) - { - serial_putc (*s++); - } -} - static int asc_serial_getc(void) { ulong symbol_mask; @@ -292,7 +284,7 @@ static struct serial_device asc_serial_drv = { .stop = NULL, .setbrg = asc_serial_setbrg, .putc = asc_serial_putc, - .puts = asc_serial_puts, + .puts = default_serial_puts, .getc = asc_serial_getc, .tstc = asc_serial_tstc, }; diff --git a/arch/mips/cpu/mips64/Makefile b/arch/mips/cpu/mips64/Makefile new file mode 100644 index 0000000000..be38664844 --- /dev/null +++ b/arch/mips/cpu/mips64/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START = start.o +COBJS-y = cpu.o interrupts.o time.o cache.o + +SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S new file mode 100644 index 0000000000..036f035d96 --- /dev/null +++ b/arch/mips/cpu/mips64/cache.S @@ -0,0 +1,229 @@ +/* + * Cache-handling routined for MIPS CPUs + * + * Copyright (c) 2003 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RA t9 + +/* + * 16kB is the maximum size of instruction and data caches on MIPS 4K, + * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience. + * + * Note that the above size is the maximum size of primary cache. U-Boot + * doesn't have L2 cache support for now. + */ +#define MIPS_MAX_CACHE_SIZE 0x10000 + +#define INDEX_BASE CKSEG0 + + .macro cache_op op addr + .set push + .set noreorder + .set mips3 + cache \op, 0(\addr) + .set pop + .endm + + .macro f_fill64 dst, offset, val + LONG_S \val, (\offset + 0 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 1 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 2 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 3 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 4 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 5 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 6 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 7 * LONGSIZE)(\dst) +#if LONGSIZE == 4 + LONG_S \val, (\offset + 8 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 9 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 10 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 11 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 12 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 13 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 14 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 15 * LONGSIZE)(\dst) +#endif + .endm + +/* + * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) + */ +LEAF(mips_init_icache) + blez a1, 9f + mtc0 zero, CP0_TAGLO + /* clear tag to invalidate */ + PTR_LI t0, INDEX_BASE + PTR_ADDU t1, t0, a1 +1: cache_op INDEX_STORE_TAG_I t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b + /* fill once, so data field parity is correct */ + PTR_LI t0, INDEX_BASE +2: cache_op FILL t0 + PTR_ADDU t0, a2 + bne t0, t1, 2b + /* invalidate again - prudent but not strictly neccessary */ + PTR_LI t0, INDEX_BASE +1: cache_op INDEX_STORE_TAG_I t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b +9: jr ra + END(mips_init_icache) + +/* + * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) + */ +LEAF(mips_init_dcache) + blez a1, 9f + mtc0 zero, CP0_TAGLO + /* clear all tags */ + PTR_LI t0, INDEX_BASE + PTR_ADDU t1, t0, a1 +1: cache_op INDEX_STORE_TAG_D t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b + /* load from each line (in cached space) */ + PTR_LI t0, INDEX_BASE +2: LONG_L zero, 0(t0) + PTR_ADDU t0, a2 + bne t0, t1, 2b + /* clear all tags */ + PTR_LI t0, INDEX_BASE +1: cache_op INDEX_STORE_TAG_D t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b +9: jr ra + END(mips_init_dcache) + +/* + * mips_cache_reset - low level initialisation of the primary caches + * + * This routine initialises the primary caches to ensure that they have good + * parity. It must be called by the ROM before any cached locations are used + * to prevent the possibility of data with bad parity being written to memory. + * + * To initialise the instruction cache it is essential that a source of data + * with good parity is available. This routine will initialise an area of + * memory starting at location zero to be used as a source of parity. + * + * RETURNS: N/A + * + */ +NESTED(mips_cache_reset, 0, ra) + move RA, ra + li t2, CONFIG_SYS_ICACHE_SIZE + li t3, CONFIG_SYS_DCACHE_SIZE + li t8, CONFIG_SYS_CACHELINE_SIZE + + li v0, MIPS_MAX_CACHE_SIZE + + /* + * Now clear that much memory starting from zero. + */ + PTR_LI a0, CKSEG1 + PTR_ADDU a1, a0, v0 +2: PTR_ADDIU a0, 64 + f_fill64 a0, -64, zero + bne a0, a1, 2b + + /* + * The caches are probably in an indeterminate state, + * so we force good parity into them by doing an + * invalidate, load/fill, invalidate for each line. + */ + + /* + * Assume bottom of RAM will generate good parity for the cache. + */ + + /* + * Initialize the I-cache first, + */ + move a1, t2 + move a2, t8 + PTR_LA v1, mips_init_icache + jalr v1 + + /* + * then initialize D-cache. + */ + move a1, t3 + move a2, t8 + PTR_LA v1, mips_init_dcache + jalr v1 + + jr RA + END(mips_cache_reset) + +/* + * dcache_status - get cache status + * + * RETURNS: 0 - cache disabled; 1 - cache enabled + * + */ +LEAF(dcache_status) + mfc0 t0, CP0_CONFIG + li t1, CONF_CM_UNCACHED + andi t0, t0, CONF_CM_CMASK + move v0, zero + beq t0, t1, 2f + li v0, 1 +2: jr ra + END(dcache_status) + +/* + * dcache_disable - disable cache + * + * RETURNS: N/A + * + */ +LEAF(dcache_disable) + mfc0 t0, CP0_CONFIG + li t1, -8 + and t0, t0, t1 + ori t0, t0, CONF_CM_UNCACHED + mtc0 t0, CP0_CONFIG + jr ra + END(dcache_disable) + +/* + * dcache_enable - enable cache + * + * RETURNS: N/A + * + */ +LEAF(dcache_enable) + mfc0 t0, CP0_CONFIG + ori t0, CONF_CM_CMASK + xori t0, CONF_CM_CMASK + ori t0, CONF_CM_CACHABLE_NONCOHERENT + mtc0 t0, CP0_CONFIG + jr ra + END(dcache_enable) diff --git a/arch/mips/cpu/mips64/config.mk b/arch/mips/cpu/mips64/config.mk new file mode 100644 index 0000000000..ebc1ceb83b --- /dev/null +++ b/arch/mips/cpu/mips64/config.mk @@ -0,0 +1,40 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Default optimization level for MIPS64 +# +# Note: Toolchains with binutils prior to v2.16 +# are no longer supported by U-Boot MIPS tree! +# +MIPSFLAGS = -march=mips64 + +PLATFORM_CPPFLAGS += $(MIPSFLAGS) +PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT +ifdef CONFIG_SYS_BIG_ENDIAN +PLATFORM_LDFLAGS += -m elf64btsmip +else +PLATFORM_LDFLAGS += -m elf64ltsmip +endif + +CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds diff --git a/arch/mips/cpu/mips64/cpu.c b/arch/mips/cpu/mips64/cpu.c new file mode 100644 index 0000000000..2a38d0c8d0 --- /dev/null +++ b/arch/mips/cpu/mips64/cpu.c @@ -0,0 +1,111 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#define cache_op(op, addr) \ + __asm__ __volatile__( \ + " .set push\n" \ + " .set noreorder\n" \ + " .set mips64\n" \ + " cache %0, %1\n" \ + " .set pop\n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +void __attribute__((weak)) _machine_restart(void) +{ + fprintf(stderr, "*** reset failed ***\n"); + + while (1) + /* NOP */; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + _machine_restart(); + + return 0; +} + +void flush_cache(ulong start_addr, ulong size) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); + + /* aend will be miscalculated when size is zero, so we return here */ + if (size == 0) + return; + + while (1) { + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void flush_dcache_range(ulong start_addr, ulong stop) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (stop - 1) & ~(lsize - 1); + + while (1) { + cache_op(HIT_WRITEBACK_INV_D, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void invalidate_dcache_range(ulong start_addr, ulong stop) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (stop - 1) & ~(lsize - 1); + + while (1) { + cache_op(HIT_INVALIDATE_D, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1) +{ + write_c0_entrylo0(low0); + write_c0_pagemask(pagemask); + write_c0_entrylo1(low1); + write_c0_entryhi(hi); + write_c0_index(index); + tlb_write_indexed(); +} diff --git a/arch/mips/cpu/mips64/interrupts.c b/arch/mips/cpu/mips64/interrupts.c new file mode 100644 index 0000000000..e4e9aae0ca --- /dev/null +++ b/arch/mips/cpu/mips64/interrupts.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +void enable_interrupts(void) +{ +} + +int disable_interrupts(void) +{ + return 0; +} diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S new file mode 100644 index 0000000000..4112de7026 --- /dev/null +++ b/arch/mips/cpu/mips64/start.S @@ -0,0 +1,256 @@ +/* + * Startup Code for MIPS64 CPU-core + * + * Copyright (c) 2003 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any dlater version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICUdlaR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Pdlace, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifndef CONFIG_SYS_MIPS_CACHE_MODE +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT +#endif + + /* + * For the moment disable interrupts, mark the kernel mode and + * set ST0_KX so that the CPU does not spit fire when using + * 64-bit addresses. + */ + .macro setup_c0_status set clr + .set push + mfc0 t0, CP0_STATUS + or t0, ST0_CU0 | \set | 0x1f | \clr + xor t0, 0x1f | \clr + mtc0 t0, CP0_STATUS + .set noreorder + sll zero, 3 # ehb + .set pop + .endm + + .set noreorder + + .globl _start + .text +_start: + .org 0x000 + b reset + nop + .org 0x080 + b romReserved + nop + .org 0x100 + b romReserved + nop + .org 0x180 + b romReserved + nop + .org 0x200 + b romReserved + nop + .org 0x280 + b romReserved + nop + .org 0x300 + b romReserved + nop + .org 0x380 + b romReserved + nop + .org 0x480 + b romReserved + nop + + /* + * We hope there are no more reserved vectors! + * 128 * 8 == 1024 == 0x400 + * so this is address R_VEC+0x400 == 0xbfc00400 + */ + .org 0x500 + .align 4 +reset: + + /* Clear watch registers */ + dmtc0 zero, CP0_WATCHLO + dmtc0 zero, CP0_WATCHHI + + /* WP(Watch Pending), SW0/1 should be cleared */ + mtc0 zero, CP0_CAUSE + + setup_c0_status ST0_KX 0 + + /* Init Timer */ + mtc0 zero, CP0_COUNT + mtc0 zero, CP0_COMPARE + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* CONFIG0 register */ + dli t0, CONF_CM_UNCACHED + mtc0 t0, CP0_CONFIG +#endif + + /* Initialize $gp */ + bal 1f + nop + .dword _gp +1: + ld gp, 0(ra) + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* Initialize any external memory */ + dla t9, lowlevel_init + jalr t9 + nop + + /* Initialize caches... */ + dla t9, mips_cache_reset + jalr t9 + nop + + /* ... and enable them */ + dli t0, CONFIG_SYS_MIPS_CACHE_MODE + mtc0 t0, CP0_CONFIG +#endif + + /* Set up temporary stack */ + dli t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + dla sp, 0(t0) + + dla t9, board_init_f + jr t9 + nop + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * a0 = addr_sp + * a1 = gd + * a2 = destination address + */ + .globl relocate_code + .ent relocate_code +relocate_code: + move sp, a0 # set new stack pointer + + dli t0, CONFIG_SYS_MONITOR_BASE + dla t3, in_ram + ld t2, -24(t3) # t2 <-- uboot_end_data + move t1, a2 + move s2, a2 # s2 <-- destination address + + /* + * Fix $gp: + * + * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address + */ + move t8, gp + dsub gp, CONFIG_SYS_MONITOR_BASE + dadd gp, a2 # gp now adjusted + dsub s1, gp, t8 # s1 <-- relocation offset + + /* + * t0 = source address + * t1 = target address + * t2 = source end address + */ + + /* + * Save destination address and size for dlater usage in flush_cache() + */ + move s0, a1 # save gd in s0 + move a0, t1 # a0 <-- destination addr + dsub a1, t2, t0 # a1 <-- size + +1: + lw t3, 0(t0) + sw t3, 0(t1) + daddu t0, 4 + ble t0, t2, 1b + daddu t1, 4 + + /* If caches were enabled, we would have to flush them here. */ + + /* a0 & a1 are already set up for flush_cache(start, size) */ + dla t9, flush_cache + jalr t9 + nop + + /* Jump to where we've relocated ourselves */ + daddi t0, s2, in_ram - _start + jr t0 + nop + + .dword _gp + .dword _GLOBAL_OFFSET_TABLE_ + .dword uboot_end_data + .dword uboot_end + .dword num_got_entries + +in_ram: + /* + * Now we want to update GOT. + * + * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object + * generated by GNU ld. Skip these reserved entries from relocation. + */ + ld t3, -8(t0) # t3 <-- num_got_entries + ld t8, -32(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_ + ld t9, -40(t0) # t9 <-- _gp + dsub t8, t9 # compute offset + dadd t8, t8, gp # t8 now holds relocated _G_O_T_ + daddi t8, t8, 16 # skipping first two entries + dli t2, 2 +1: + ld t1, 0(t8) + beqz t1, 2f + dadd t1, s1 + sd t1, 0(t8) +2: + daddi t2, 1 + blt t2, t3, 1b + daddi t8, 8 + + /* Clear BSS */ + ld t1, -24(t0) # t1 <-- uboot_end_data + ld t2, -16(t0) # t2 <-- uboot_end + dadd t1, s1 # adjust pointers + dadd t2, s1 + + dsub t1, 8 +1: + daddi t1, 8 + bltl t1, t2, 1b + sd zero, 0(t1) + + move a0, s0 # a0 <-- gd + dla t9, board_init_r + jr t9 + move a1, s2 + + .end relocate_code + + /* Exception handlers */ +romReserved: + b romReserved diff --git a/arch/mips/cpu/mips64/time.c b/arch/mips/cpu/mips64/time.c new file mode 100644 index 0000000000..51542808dd --- /dev/null +++ b/arch/mips/cpu/mips64/time.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static unsigned long timestamp; + +/* how many counter cycles in a jiffy */ +#define CYCLES_PER_JIFFY \ + (CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ + +/* + * timer without interrupts + */ + +int timer_init(void) +{ + /* Set up the timer for the first expiration. */ + timestamp = 0; + write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); + + return 0; +} + +ulong get_timer(ulong base) +{ + unsigned int count; + unsigned int expirelo = read_c0_compare(); + + /* Check to see if we have missed any timestamps. */ + count = read_c0_count(); + while ((count - expirelo) < 0x7fffffff) { + expirelo += CYCLES_PER_JIFFY; + timestamp++; + } + write_c0_compare(expirelo); + + return timestamp - base; +} + +void __udelay(unsigned long usec) +{ + unsigned int tmo; + + tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000)); + while ((tmo - read_c0_count()) < 0x7fffffff) + /*NOP*/; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On MIPS it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On MIPS it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c index ddcbfaa47c..cc190dfe56 100644 --- a/arch/mips/cpu/xburst/cpu.c +++ b/arch/mips/cpu/xburst/cpu.c @@ -84,8 +84,8 @@ void flush_cache(ulong start_addr, ulong size) unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); } } @@ -96,7 +96,7 @@ void flush_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) - cache_op(Hit_Writeback_Inv_D, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); } void invalidate_dcache_range(ulong start_addr, ulong stop) @@ -106,7 +106,7 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) - cache_op(Hit_Invalidate_D, addr); + cache_op(HIT_INVALIDATE_D, addr); } void flush_icache_all(void) @@ -118,7 +118,7 @@ void flush_icache_all(void) for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE; addr += CONFIG_SYS_CACHELINE_SIZE) { - cache_op(Index_Store_Tag_I, addr); + cache_op(INDEX_STORE_TAG_I, addr); } /* invalidate btb */ @@ -139,7 +139,7 @@ void flush_dcache_all(void) for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE; addr += CONFIG_SYS_CACHELINE_SIZE) { - cache_op(Index_Writeback_Inv_D, addr); + cache_op(INDEX_WRITEBACK_INV_D, addr); } __asm__ __volatile__("sync"); diff --git a/arch/mips/cpu/xburst/jz_serial.c b/arch/mips/cpu/xburst/jz_serial.c index 3199007757..a147657350 100644 --- a/arch/mips/cpu/xburst/jz_serial.c +++ b/arch/mips/cpu/xburst/jz_serial.c @@ -109,19 +109,13 @@ static int jz_serial_getc(void) return readb(&uart->rbr_thr_dllr); } -static void jz_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device jz_serial_drv = { .name = "jz_serial", .start = jz_serial_init, .stop = NULL, .setbrg = jz_serial_setbrg, .putc = jz_serial_putc, - .puts = jz_serial_puts, + .puts = default_serial_puts, .getc = jz_serial_getc, .tstc = jz_serial_tstc, }; diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S index d846104d10..3a8280cb0a 100644 --- a/arch/mips/cpu/xburst/start.S +++ b/arch/mips/cpu/xburst/start.S @@ -96,7 +96,7 @@ relocate_code: li t0, KSEG0 addi t1, t0, CONFIG_SYS_DCACHE_SIZE 2: - cache Index_Writeback_Inv_D, 0(t0) + cache INDEX_WRITEBACK_INV_D, 0(t0) bne t0, t1, 2b addi t0, CONFIG_SYS_CACHELINE_SIZE @@ -106,7 +106,7 @@ relocate_code: li t0, KSEG0 addi t1, t0, CONFIG_SYS_ICACHE_SIZE 3: - cache Index_Invalidate_I, 0(t0) + cache INDEX_INVALIDATE_I, 0(t0) bne t0, t1, 3b addi t0, CONFIG_SYS_CACHELINE_SIZE diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h index 3a1e6d615f..b768bb5081 100644 --- a/arch/mips/include/asm/addrspace.h +++ b/arch/mips/include/asm/addrspace.h @@ -136,7 +136,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_SOC_AU1X00 */ -#define UNCACHED_SDRAM(a) KSEG1ADDR(a) +#define UNCACHED_SDRAM(a) CKSEG1ADDR(a) #endif /* CONFIG_SOC_AU1X00 */ #endif /* __ASSEMBLY__ */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index 608cfcfbb3..933ccb1b78 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -401,7 +401,7 @@ symbol = value #ifdef CONFIG_SGI_IP28 /* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ #include -#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#define R10KCBARRIER(addr) cache CACHE_BARRIER, addr; #else #define R10KCBARRIER(addr) #endif diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 70bcad7694..6464250d84 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -14,54 +14,54 @@ /* * Cache Operations available on all MIPS processors with R4000-style caches */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 +#define INDEX_INVALIDATE_I 0x00 +#define INDEX_WRITEBACK_INV_D 0x01 +#define INDEX_LOAD_TAG_I 0x04 +#define INDEX_LOAD_TAG_D 0x05 +#define INDEX_STORE_TAG_I 0x08 +#define INDEX_STORE_TAG_D 0x09 #if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 +#define HIT_INVALIDATE_I 0x00 #else -#define Hit_Invalidate_I 0x10 +#define HIT_INVALIDATE_I 0x10 #endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 +#define HIT_INVALIDATE_D 0x11 +#define HIT_WRITEBACK_INV_D 0x15 /* * R4000-specific cacheops */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 +#define CREATE_DIRTY_EXCL_D 0x0d +#define FILL 0x14 +#define HIT_WRITEBACK_I 0x18 +#define HIT_WRITEBACK_D 0x19 /* * R4000SC and R4400SC-specific cacheops */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f +#define INDEX_INVALIDATE_SI 0x02 +#define INDEX_WRITEBACK_INV_SD 0x03 +#define INDEX_LOAD_TAG_SI 0x06 +#define INDEX_LOAD_TAG_SD 0x07 +#define INDEX_STORE_TAG_SI 0x0A +#define INDEX_STORE_TAG_SD 0x0B +#define CREATE_DIRTY_EXCL_SD 0x0f +#define HIT_INVALIDATE_SI 0x12 +#define HIT_INVALIDATE_SD 0x13 +#define HIT_WRITEBACK_INV_SD 0x17 +#define HIT_WRITEBACK_SD 0x1b +#define HIT_SET_VIRTUAL_SI 0x1e +#define HIT_SET_VIRTUAL_SD 0x1f /* * R5000-specific cacheops */ -#define R5K_Page_Invalidate_S 0x17 +#define R5K_PAGE_INVALIDATE_S 0x17 /* * RM7000-specific cacheops */ -#define Page_Invalidate_T 0x16 +#define PAGE_INVALIDATE_T 0x16 /* * R10000-specific cacheops @@ -69,17 +69,17 @@ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. * Most of the _S cacheops are identical to the R4000SC _SD cacheops. */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f +#define INDEX_WRITEBACK_INV_S 0x03 +#define INDEX_LOAD_TAG_S 0x07 +#define INDEX_STORE_TAG_S 0x0B +#define HIT_INVALIDATE_S 0x13 +#define CACHE_BARRIER 0x14 +#define HIT_WRITEBACK_INV_S 0x17 +#define INDEX_LOAD_DATA_I 0x18 +#define INDEX_LOAD_DATA_D 0x19 +#define INDEX_LOAD_DATA_S 0x1b +#define INDEX_STORE_DATA_I 0x1c +#define INDEX_STORE_DATA_D 0x1d +#define INDEX_STORE_DATA_S 0x1f #endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h index 6e2cdc72cf..a735a8a2c7 100644 --- a/arch/mips/include/asm/global_data.h +++ b/arch/mips/include/asm/global_data.h @@ -48,7 +48,7 @@ typedef struct global_data { unsigned long tbl; unsigned long lastinc; #endif - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 025012ae60..80eab75e15 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -120,12 +120,20 @@ static inline void set_io_port_base(unsigned long base) */ extern inline phys_addr_t virt_to_phys(volatile void * address) { +#ifndef CONFIG_64BIT return CPHYSADDR(address); +#else + return XPHYSADDR(address); +#endif } extern inline void * phys_to_virt(unsigned long address) { +#ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); +#else + return (void *)CKSEG0ADDR(address); +#endif } /* @@ -133,12 +141,20 @@ extern inline void * phys_to_virt(unsigned long address) */ extern inline unsigned long virt_to_bus(volatile void * address) { +#ifndef CONFIG_64BIT return CPHYSADDR(address); +#else + return XPHYSADDR(address); +#endif } extern inline void * bus_to_virt(unsigned long address) { +#ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); +#else + return (void *)CKSEG0ADDR(address); +#endif } /* diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h index 879aae210b..4deac5207a 100644 --- a/arch/mips/include/asm/posix_types.h +++ b/arch/mips/include/asm/posix_types.h @@ -24,9 +24,15 @@ typedef int __kernel_pid_t; typedef int __kernel_ipc_pid_t; typedef int __kernel_uid_t; typedef int __kernel_gid_t; +#if _MIPS_SZLONG != 64 typedef unsigned int __kernel_size_t; typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; +#else +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#endif typedef long __kernel_time_t; typedef long __kernel_suseconds_t; typedef long __kernel_clock_t; diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h index 590649aa3e..5fa4a6a730 100644 --- a/arch/mips/include/asm/u-boot.h +++ b/arch/mips/include/asm/u-boot.h @@ -32,7 +32,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index b14b33efcd..7ddd77832c 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -266,8 +266,8 @@ void board_init_r(gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds index 190342062a..cef19c51ee 100644 --- a/arch/nds32/cpu/n1213/u-boot.lds +++ b/arch/nds32/cpu/n1213/u-boot.lds @@ -52,9 +52,11 @@ SECTIONS } . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/arch/nds32/include/asm/global_data.h b/arch/nds32/include/asm/global_data.h index 94bd4c2722..b1feb2c0d0 100644 --- a/arch/nds32/include/asm/global_data.h +++ b/arch/nds32/include/asm/global_data.h @@ -44,7 +44,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ unsigned long reloc_off; /* Relocation Offset */ diff --git a/arch/nds32/include/asm/u-boot.h b/arch/nds32/include/asm/u-boot.h index b533fea7c5..7b8d8e48fb 100644 --- a/arch/nds32/include/asm/u-boot.h +++ b/arch/nds32/include/asm/u-boot.h @@ -39,7 +39,7 @@ #include typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 89900fea43..91395cabf3 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -320,8 +320,8 @@ void board_init_r(gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ serial_initialize(); @@ -396,7 +396,7 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT board_late_init(); #endif diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds index 4856bd368d..d0eb80de0e 100644 --- a/arch/nios2/cpu/u-boot.lds +++ b/arch/nios2/cpu/u-boot.lds @@ -45,13 +45,11 @@ SECTIONS * the initialization code relocates the command table as * well -- admittedly, this is just pure laziness ;-) */ - __u_boot_cmd_start = .; - .u_boot_cmd : - { - *(.u_boot_cmd) - } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } /* INIT DATA sections - "Small" data (see the gcc -G option) * is always gp-relative. Here we make all init data sections diff --git a/arch/nios2/include/asm/global_data.h b/arch/nios2/include/asm/global_data.h index 3b0d9e6294..413b485b61 100644 --- a/arch/nios2/include/asm/global_data.h +++ b/arch/nios2/include/asm/global_data.h @@ -26,7 +26,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/nios2/include/asm/u-boot.h b/arch/nios2/include/asm/u-boot.h index 315ef8bedb..e591237634 100644 --- a/arch/nios2/include/asm/u-boot.h +++ b/arch/nios2/include/asm/u-boot.h @@ -39,7 +39,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/openrisc/include/asm/global_data.h b/arch/openrisc/include/asm/global_data.h index 6a0c0cc547..96f3f1cdbb 100644 --- a/arch/openrisc/include/asm/global_data.h +++ b/arch/openrisc/include/asm/global_data.h @@ -35,7 +35,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ phys_size_t ram_size; /* RAM size */ diff --git a/arch/openrisc/include/asm/u-boot.h b/arch/openrisc/include/asm/u-boot.h index 76b813273f..f2f31d3bb4 100644 --- a/arch/openrisc/include/asm/u-boot.h +++ b/arch/openrisc/include/asm/u-boot.h @@ -32,7 +32,7 @@ #define _U_BOOT_H_ typedef struct bd_info { - unsigned long bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds index 24823cd20f..ecee439579 100644 --- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds +++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds index 7a4d9270df..7faefba555 100644 --- a/arch/powerpc/cpu/mpc512x/u-boot.lds +++ b/arch/powerpc/cpu/mpc512x/u-boot.lds @@ -57,9 +57,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc5xx/serial.c b/arch/powerpc/cpu/mpc5xx/serial.c index 6ef8be8fac..732856a5c5 100644 --- a/arch/powerpc/cpu/mpc5xx/serial.c +++ b/arch/powerpc/cpu/mpc5xx/serial.c @@ -161,21 +161,13 @@ static void mpc5xx_serial_setbrg(void) #endif } -static void mpc5xx_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s); - ++s; - } -} - static struct serial_device mpc5xx_serial_drv = { .name = "mpc5xx_serial", .start = mpc5xx_serial_init, .stop = NULL, .setbrg = mpc5xx_serial_setbrg, .putc = mpc5xx_serial_putc, - .puts = mpc5xx_serial_puts, + .puts = default_serial_puts, .getc = mpc5xx_serial_getc, .tstc = mpc5xx_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds index e02b213d28..c91e146d26 100644 --- a/arch/powerpc/cpu/mpc5xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds index 0c6c54e10a..ac7844dcf4 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds @@ -66,10 +66,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds index 5dcaec1820..1f46eadb5d 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds index 39bb42e1c9..c1479544f9 100644 --- a/arch/powerpc/cpu/mpc8220/u-boot.lds +++ b/arch/powerpc/cpu/mpc8220/u-boot.lds @@ -59,9 +59,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c index 25d4472ea0..772528f82c 100644 --- a/arch/powerpc/cpu/mpc8220/uart.c +++ b/arch/powerpc/cpu/mpc8220/uart.c @@ -84,13 +84,6 @@ static void mpc8220_serial_putc(const char c) psc->xmitbuf[0] = c; } -static void mpc8220_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8220_serial_getc(void) { volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; @@ -132,7 +125,7 @@ static struct serial_device mpc8220_serial_drv = { .stop = NULL, .setbrg = mpc8220_serial_setbrg, .putc = mpc8220_serial_putc, - .puts = mpc8220_serial_puts, + .puts = default_serial_puts, .getc = mpc8220_serial_getc, .tstc = mpc8220_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c index 395f7767d1..cfc665d95c 100644 --- a/arch/powerpc/cpu/mpc824x/cpu_init.c +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -63,7 +63,7 @@ void cpu_init_f (void) { /* MOUSSE board is initialized in asm */ -#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW) +#if !defined(CONFIG_MOUSSE) register unsigned long val; CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ @@ -321,7 +321,7 @@ cpu_init_f (void) CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ __asm__ __volatile__("eieio"); -#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */ +#endif /* !CONFIG_MOUSSE */ } diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index 70db73e156..076df70a9f 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -113,9 +113,6 @@ _start: in_flash: -#if defined(CONFIG_BMW) - bl early_init_f /* Must be ASM: no stack yet! */ -#endif /* * Setup BATs - cannot be done in C since we don't have a stack yet */ @@ -126,7 +123,7 @@ in_flash: mfmsr r3 ori r3, r3, (MSR_IR | MSR_DR) mtmsr r3 -#if !defined(CONFIG_BMW) + /* Enable and invalidate data cache. */ mfspr r3, HID0 @@ -158,7 +155,7 @@ in_flash: ori r3, r3, 0x0080 sync mtspr 1011, r3 -#endif /* !CONFIG_BMW */ + /* * Thisk the stack pointer *somewhere* sensible. Doesnt * matter much where as we'll move it when we relocate @@ -498,7 +495,6 @@ relocate_code: bdnz 3b 4: -#if !defined(CONFIG_BMW) /* Unlock the data cache and invalidate locked area */ xor r0, r0, r0 mtspr 1011, r0 @@ -510,7 +506,6 @@ relocate_code: dcbi r0, r4 addi r4, r4, 32 bdnz 41b -#endif /* * Now flush the cache: note that we must start from a cache aligned diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds index b30ce76e02..a7130125c7 100644 --- a/arch/powerpc/cpu/mpc824x/u-boot.lds +++ b/arch/powerpc/cpu/mpc824x/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc8260/serial_scc.c b/arch/powerpc/cpu/mpc8260/serial_scc.c index ab7755824a..ab2a2b29cb 100644 --- a/arch/powerpc/cpu/mpc8260/serial_scc.c +++ b/arch/powerpc/cpu/mpc8260/serial_scc.c @@ -217,13 +217,6 @@ static void mpc8260_scc_serial_putc(const char c) tbdf->cbd_sc |= BD_SC_READY; } -static void mpc8260_scc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8260_scc_serial_getc(void) { volatile cbd_t *rbdf; @@ -267,7 +260,7 @@ static struct serial_device mpc8260_scc_serial_drv = { .stop = NULL, .setbrg = mpc8260_scc_serial_setbrg, .putc = mpc8260_scc_serial_putc, - .puts = mpc8260_scc_serial_puts, + .puts = default_serial_puts, .getc = mpc8260_scc_serial_getc, .tstc = mpc8260_scc_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc8260/serial_smc.c b/arch/powerpc/cpu/mpc8260/serial_smc.c index 7edde9a492..feba1f63d2 100644 --- a/arch/powerpc/cpu/mpc8260/serial_smc.c +++ b/arch/powerpc/cpu/mpc8260/serial_smc.c @@ -216,13 +216,6 @@ static void mpc8260_smc_serial_putc(const char c) rtx->txbd.cbd_sc |= BD_SC_READY; } -static void mpc8260_smc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8260_smc_serial_getc(void) { volatile smc_uart_t *up; @@ -270,7 +263,7 @@ static struct serial_device mpc8260_smc_serial_drv = { .stop = NULL, .setbrg = mpc8260_smc_serial_setbrg, .putc = mpc8260_smc_serial_putc, - .puts = mpc8260_smc_serial_puts, + .puts = default_serial_puts, .getc = mpc8260_smc_serial_getc, .tstc = mpc8260_smc_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds index 60b71ecd70..42385fcc19 100644 --- a/arch/powerpc/cpu/mpc8260/u-boot.lds +++ b/arch/powerpc/cpu/mpc8260/u-boot.lds @@ -59,9 +59,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 663510987d..e64b0c3411 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -56,6 +56,7 @@ int checkcpu(void) u32 partid; } cpu_type_list [] = { CPU_TYPE_ENTRY(8308), + CPU_TYPE_ENTRY(8309), CPU_TYPE_ENTRY(8311), CPU_TYPE_ENTRY(8313), CPU_TYPE_ENTRY(8314), diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 76afba5dd2..20d06003e5 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -268,6 +268,9 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SICRL __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); #endif +#ifdef CONFIG_SYS_GPR1 + __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1); +#endif #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); #endif diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index f78099d2fe..fb0f7aad6d 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -105,6 +105,8 @@ int get_clocks(void) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; +#elif defined(CONFIG_MPC8309) + u32 usbdr_clk; #endif #ifdef CONFIG_MPC834x u32 usbmph_clk; @@ -120,14 +122,16 @@ int get_clocks(void) #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif +#if !defined(CONFIG_MPC8309) u32 enc_clk; +#endif u32 lbiu_clk; u32 lclk_clk; u32 mem_clk; #if defined(CONFIG_MPC8360) u32 mem_sec_clk; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) u32 qepmf; u32 qepdf; u32 qe_clk; @@ -185,7 +189,10 @@ int get_clocks(void) /* unkown SCCR_TSEC1CM value */ return -2; } +#endif +#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { case 0: usbdr_clk = 0; @@ -260,6 +267,7 @@ int get_clocks(void) return -6; } #endif +#if !defined(CONFIG_MPC8309) switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { case 0: enc_clk = 0; @@ -277,6 +285,7 @@ int get_clocks(void) /* unkown SCCR_ENCCM value */ return -7; } +#endif #if defined(CONFIG_FSL_ESDHC) switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) { @@ -329,6 +338,8 @@ int get_clocks(void) i2c1_clk = sdhc_clk; #elif defined(CONFIG_MPC837x) i2c1_clk = enc_clk; +#elif defined(CONFIG_MPC8309) + i2c1_clk = csb_clk; #endif #if !defined(CONFIG_MPC832x) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ @@ -444,7 +455,7 @@ int get_clocks(void) return -13; } -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT; qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT; qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); @@ -457,6 +468,8 @@ int get_clocks(void) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; gd->usbdr_clk = usbdr_clk; +#elif defined(CONFIG_MPC8309) + gd->usbdr_clk = usbdr_clk; #endif #if defined(CONFIG_MPC834x) gd->usbmph_clk = usbmph_clk; @@ -472,14 +485,16 @@ int get_clocks(void) #if !defined(CONFIG_MPC832x) gd->i2c2_clk = i2c2_clk; #endif +#if !defined(CONFIG_MPC8309) gd->enc_clk = enc_clk; +#endif gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) gd->mem_sec_clk = mem_sec_clk; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif @@ -523,7 +538,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) printf("Clock configuration:\n"); printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk)); printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk)); -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk)); printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk)); #endif @@ -533,7 +548,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_MPC8360) printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk)); #endif +#if !defined(CONFIG_MPC8309) printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk)); +#endif printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk)); #if !defined(CONFIG_MPC832x) printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk)); @@ -549,6 +566,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk)); printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk)); printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk)); +#elif defined(CONFIG_MPC8309) + printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk)); #endif #if defined(CONFIG_MPC834x) printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk)); diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index 2f4b9ad557..d699def9dd 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -58,9 +58,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 33e93c88d7..78c412d9f3 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o @@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o +COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o +COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o -COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o @@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o +COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o +COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c new file mode 100644 index 0000000000..7d33731a7b --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -0,0 +1,141 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), + SET_QP_INFO(19, 45, 1, 1), + SET_QP_INFO(20, 46, 1, 1), + SET_QP_INFO(21, 47, 1, 2), + SET_QP_INFO(22, 48, 1, 2), + SET_QP_INFO(23, 49, 1, 3), + SET_QP_INFO(24, 50, 1, 3), + SET_QP_INFO(25, 51, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c new file mode 100644 index 0000000000..9990202f42 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u8 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x12, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x30, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x32, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x33, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x34, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, + SRIO1, SRIO1}}, + {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9A, {PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e8989bdf45..2be192d578 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111) puts("Work-around for Erratum ESDHC111 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + puts("Work-around for Erratum A004468 enabled\n"); +#endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) puts("Work-around for Erratum ESDHC135 enabled\n"); #endif -#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) - puts("Work-around for Erratum ESDHC136 enabled\n"); +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13) + if (SVR_MAJ(svr) < 3) + puts("Work-around for Erratum ESDHC13 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) puts("Work-around for Erratum ESDHC-A001 enabled\n"); @@ -126,6 +130,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 puts("Work-around for Erratum A004510 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + puts("Work-around for Erratum SRIO-A004034 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + puts("Work-around for Erratum A004934 enabled\n"); #endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 5ddb29435c..db232e64f8 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -60,20 +60,32 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) +#if (defined(CONFIG_DDR_CLK_FREQ) || \ + defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif /* CONFIG_FSL_CORENET */ -#ifdef CONFIG_DDR_CLK_FREQ - u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) - >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -#else + + /* + * Cornet platforms use ddr sync bit in RCW to indicate sync vs async + * mode. Previous platform use ddr ratio to do the same. This + * information is only for display here. + */ #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 ddr_sync = 0; /* only async mode is supported */ +#else u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#else /* CONFIG_FSL_CORENET */ +#ifdef CONFIG_DDR_CLK_FREQ + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; #else u32 ddr_ratio = 0; -#endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ +#endif /* CONFIG_FSL_CORENET */ + unsigned int i, core, nr_cores = cpu_numcores(); u32 mask = cpu_mask(); @@ -127,6 +139,11 @@ int checkcpu (void) printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); + if (nr_cores > CONFIG_MAX_CPUS) { + panic("\nUnexpected number of cores: %d, max is %d\n", + nr_cores, CONFIG_MAX_CPUS); + } + get_sys_info(&sysinfo); puts("Clock Configuration:"); @@ -181,6 +198,10 @@ int checkcpu (void) } #endif +#if defined(CONFIG_FSL_IFC) + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); +#endif + #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); #endif @@ -196,6 +217,10 @@ int checkcpu (void) } #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); +#endif + #ifdef CONFIG_SYS_DPAA_PME printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); #endif @@ -270,10 +295,7 @@ reset_85xx_watchdog(void) /* * Clear TSR(WIS) bit by writing 1 */ - unsigned long val; - val = mfspr(SPRN_TSR); - val |= TSR_WIS; - mtspr(SPRN_TSR, val); + mtspr(SPRN_TSR, TSR_WIS); } #endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index afb56719da..736293c41d 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -295,6 +295,43 @@ static void __fsl_serdes__init(void) } __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int enable_cluster_l2(void) +{ + int i = 0; + u32 cluster; + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct ccsr_cluster_l2 __iomem *l2cache; + + cluster = in_be32(&gur->tp_cluster[i].lower); + if (cluster & TP_CLUSTER_EOC) + return 0; + + /* The first cache has already been set up, so skip it */ + i++; + + /* Look through the remaining clusters, and set up their caches */ + do { + l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000); + cluster = in_be32(&gur->tp_cluster[i].lower); + + /* set stash ID to (cluster) * 2 + 32 + 1 */ + clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1); + + printf("enable l2 for cluster %d %p\n", i, l2cache); + + out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC); + while ((in_be32(&l2cache->l2csr0) & + (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) + ; + out_be32(&l2cache->l2csr0, L2CSR0_L2E); + i++; + } while (!(cluster & TP_CLUSTER_EOC)); + + return 0; +} +#endif + /* * Initialize L2 as cache. * @@ -306,7 +343,12 @@ int cpu_init_r(void) { __maybe_unused u32 svr = get_svr(); #ifdef CONFIG_SYS_LBC_LCRR - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; +#endif +#ifdef CONFIG_L2_CACHE + ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ @@ -356,7 +398,6 @@ int cpu_init_r(void) puts ("L2: "); #if defined(CONFIG_L2_CACHE) - volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; volatile uint cache_ctl; uint ver; u32 l2siz_field; @@ -467,6 +508,11 @@ int cpu_init_r(void) } skip_l2: +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + if (l2cache->l2csr0 & L2CSR0_L2E) + printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + + enable_cluster_l2(); #else puts("disabled\n"); #endif @@ -478,7 +524,7 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER char *s = getenv("bootmaster"); if (s) { if (!strcmp(s, "SRIO1")) { @@ -497,11 +543,13 @@ skip_l2: setup_mp(); #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 { - void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; - setbits_be32(p, 1 << (31 - 14)); + if (SVR_MAJ(svr) < 3) { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } } #endif diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ca4ed62645..f118dd5daf 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -18,12 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { - unsigned int i; + unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + int timeout_save; volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; - u32 total_gb_size_per_controller; unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif @@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } - out_be32(&ddr->eor, regs->ddr_eor); - + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 debug("Workaround for ERRATUM_DDR111_DDR134\n"); for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { @@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); @@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[i], regs->debug[i]); } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + out_be32(&ddr->debug[28], 0x00003000); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 out_be32(&ddr->debug[12], 0x00000015); @@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + timeout_save = timeout; +#endif + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 /* continue this workaround */ @@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, while (in_be32(&ddr->debug[1]) & 0x400) udelay(10000); /* throttle polling rate */ - /* 7. Wait for 400ms/GB */ - total_gb_size_per_controller = 0; - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i == csn) { - total_gb_size_per_controller += - ((csn_bnds_backup & 0xFFFF) >> 6) - - (csn_bnds_backup >> 22) + 1; - } else { - total_gb_size_per_controller += - ((regs->cs[i].bnds & 0xFFFF) >> 6) - - (regs->cs[i].bnds >> 22) + 1; - } - } - if (in_be32(&ddr->sdram_cfg) & 0x80000) - total_gb_size_per_controller <<= 1; - debug("Wait for %d ms\n", total_gb_size_per_controller * 400); - udelay(total_gb_size_per_controller * 400000); + /* 7. Wait for state machine 2nd run, roughly 400ms/GB */ + debug("Wait for %d * 10ms\n", timeout_save); + udelay(timeout_save * 10000); /* 8. Set sdram_cfg_2[dinit] if options requires */ setbits_be32(&ddr->sdram_cfg_2, @@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); /* 9. Poll until dinit is cleared */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) - udelay(10000); + timeout = timeout_save; + debug("Need to wait up to %d * 10ms\n", timeout); + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); /* 10. Clear EEBACR[3] */ clrbits_be32(&ecm->eebacr, 10000000); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index a0a9b4c5ae..ab0933076d 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob); void ft_fixup_cpu(void *blob, u64 memory_limit) { int off; - ulong spin_tbl_addr = get_spin_phys_addr(); - u32 bootpg = determine_mp_bootpg(); + phys_addr_t spin_tbl_addr = get_spin_phys_addr(); + u32 bootpg = determine_mp_bootpg(NULL); u32 id = get_my_id(); const char *enable_method; @@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) if ((u64)bootpg < memory_limit) { off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) - printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); + printf("Failed to reserve memory for bootpg: %s\n", + fdt_strerror(off)); + } + /* Reserve spin table page */ + if (spin_tbl_addr < memory_limit) { + off = fdt_add_mem_rsv(blob, + (spin_tbl_addr & ~0xffful), 4096); + if (off < 0) + printf("Failed to reserve memory for spin table: %s\n", + fdt_strerror(off)); } } #endif @@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob) /* we dont bother w/L3 since no platform of this type has one */ } -#elif defined(CONFIG_BACKSIDE_L2_CACHE) +#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ + defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) static inline void ft_fixup_l2cache(void *blob) { int off, l2_off, l3_off = -1; u32 *ph; +#ifdef CONFIG_BACKSIDE_L2_CACHE u32 l2cfg0 = mfspr(SPRN_L2CFG0); +#else + struct ccsr_cluster_l2 *l2cache = + (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); + u32 l2cfg0 = in_be32(&l2cache->l2cfg0); +#endif u32 size, line_size, num_ways, num_sets; int has_l2 = 1; @@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob) if (has_l2) { #ifdef CONFIG_SYS_CACHE_STASHING u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* Only initialize every eighth thread */ + if (reg && !((*reg) % 8)) +#else if (reg) +#endif fdt_setprop_cell(blob, l2_off, "cache-stash-id", (*reg * 2) + 32 + 1); #endif @@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + do_fixup_by_compat_u32(blob, "fsl,qman", + "clock-frequency", sysinfo.freqQMAN, 1); +#endif + #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", "clock-frequency", sysinfo.freqPME, 1); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c new file mode 100644 index 0000000000..01dcdf6bc1 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "fsl_corenet2_serdes.h" + +static u64 serdes1_prtcl_map; +static u64 serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 +static u64 serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 +static u64 serdes4_prtcl_map; +#endif + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", + [CPRI1] = "CPRI1", + [CPRI2] = "CPRI2", + [CPRI3] = "CPRI3", + [CPRI4] = "CPRI4", + [CPRI5] = "CPRI5", + [CPRI6] = "CPRI6", + [CPRI7] = "CPRI7", + [CPRI8] = "CPRI8", + [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9", + [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10", + [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9", + [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10", + [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9", + [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10", + [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9", + [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10", + [QSGMII_FM1_A] = "QSGMII_FM1_A", + [QSGMII_FM1_B] = "QSGMII_FM1_B", + [QSGMII_FM2_A] = "QSGMII_FM2_A", + [QSGMII_FM2_B] = "QSGMII_FM2_B", + [XFI_FM1_MAC9] = "XFI_FM1_MAC9", + [XFI_FM1_MAC10] = "XFI_FM1_MAC10", + [XFI_FM2_MAC9] = "XFI_FM2_MAC9", + [XFI_FM2_MAC10] = "XFI_FM2_MAC10", + [INTERLAKEN] = "INTERLAKEN", +}; +#endif + +int is_serdes_configured(enum srds_prtcl device) +{ + u64 ret = 0; + + ret |= (1ULL << device) & serdes1_prtcl_map; + ret |= (1ULL << device) & serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 + ret |= (1ULL << device) & serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + ret |= (1ULL << device) & serdes4_prtcl_map; +#endif + + return !!ret; +} + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device) +{ + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 cfg = in_be32(&gur->rcwsr[4]); + int i; + + switch (sd) { + case FSL_SRDS_1: + cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + break; + case FSL_SRDS_2: + cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + break; +#ifdef CONFIG_SYS_FSL_SRDS_3 + case FSL_SRDS_3: + cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + case FSL_SRDS_4: + cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + break; +#endif + default: + printf("invalid SerDes%d\n", sd); + break; + } + /* Is serdes enabled at all? */ + if (unlikely(cfg == 0)) + return -ENODEV; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(sd, cfg, i) == device) + return i; + } + + return -ENODEV; +} + +u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u64 serdes_prtcl_map = 0; + u32 cfg; + int lane; + + cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; + /* Is serdes enabled at all? */ + if (!cfg) { + printf("SERDES%d is not enabled\n", sd + 1); + return 0; + } + + cfg >>= sd_prctl_shift; + printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane); + serdes_prtcl_map |= (1ULL << lane_prtcl); + } + + return serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + + serdes1_prtcl_map = serdes_init(FSL_SRDS_1, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); + serdes2_prtcl_map = serdes_init(FSL_SRDS_2, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#ifdef CONFIG_SYS_FSL_SRDS_3 + serdes3_prtcl_map = serdes_init(FSL_SRDS_3, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + serdes4_prtcl_map = serdes_init(FSL_SRDS_4, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT); +#endif + +} diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h new file mode 100644 index 0000000000..2258f41888 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_CORENET2_SERDES_H +#define __FSL_CORENET2_SERDES_H + +int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); +#endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 2a68060369..e6b1b1b7ee 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -92,10 +92,17 @@ static const struct { { 17, 163, FSL_SRDS_BANK_2 }, { 18, 164, FSL_SRDS_BANK_2 }, { 19, 165, FSL_SRDS_BANK_2 }, +#ifdef CONFIG_PPC_P4080 { 20, 170, FSL_SRDS_BANK_3 }, { 21, 171, FSL_SRDS_BANK_3 }, { 22, 172, FSL_SRDS_BANK_3 }, { 23, 173, FSL_SRDS_BANK_3 }, +#else + { 20, 166, FSL_SRDS_BANK_3 }, + { 21, 167, FSL_SRDS_BANK_3 }, + { 22, 168, FSL_SRDS_BANK_3 }, + { 23, 169, FSL_SRDS_BANK_3 }, +#endif }; int serdes_get_lane_idx(int lane) @@ -493,6 +500,9 @@ void fsl_serdes_init(void) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int cfg; serdes_corenet_t *srds_regs; +#ifdef CONFIG_PPC_P5040 + serdes_corenet_t *srds2_regs; +#endif int lane, bank, idx; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -574,6 +584,34 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_PPC_P5040 + /* + * Lanes on bank 4 on P5040 are commented-out, but for some SERDES + * protocols, these lanes are routed to SATA. We use serdes_prtcl_map + * to decide whether a protocol is supported on a given lane, so SATA + * will be identified as not supported, and therefore not initialized. + * So for protocols which use SATA on bank4, we add SATA support in + * serdes_prtcl_map. + */ + switch (cfg) { + case 0x0: + case 0x1: + case 0x2: + case 0x3: + case 0x4: + case 0x5: + case 0x6: + case 0x7: + serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2; + break; + default: + srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; + + /* We don't need bank 4, so power it down */ + setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD); + } +#endif + soc_serdes_init(); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -617,6 +655,38 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A004699 + /* + * To avoid the situation that resulted in the P4080 erratum + * SERDES-8, a given SerDes bank will use the PLLs from the previous + * bank if one of the PLL frequencies is a multiple of the other. For + * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz, + * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says + * that, in this situation, lane synchronization is not initiated. So + * when we detect a bank with a "borrowed" PLL, we have to manually + * initiate lane synchronization. + */ + for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) { + /* Determine the first lane for this bank */ + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) + if (lanes[lane].bank == bank) + break; + idx = lanes[lane].idx; + + /* + * Check if the PLL for the bank is borrowed. The UOTHL + * bit of the first lane will tell us that. + */ + if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) { + /* Manually start lane synchronization */ + setbits_be32(&srds_regs->bank[bank].pllcr0, + SRDS_PLLCR0_PVCOCNT_EN); + } + } +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index f261351c8a..3c551e9b4c 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -22,9 +22,6 @@ #ifndef __FSL_CORENET_SERDES_H #define __FSL_CORENET_SERDES_H -#define SRDS_MAX_LANES 18 -#define SRDS_MAX_BANK 3 - enum srds_bank { FSL_SRDS_BANK_1 = 0, FSL_SRDS_BANK_2 = 1, diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index 11881c9489..2e533672f3 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset) return liodn_bases[dpaa_dev].num_ids; } +#ifdef CONFIG_SYS_SRIO static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) { int i; @@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) } } } +#endif static void set_liodn(struct liodn_id_table *tbl, int size) { @@ -181,8 +183,10 @@ void set_liodns(void) /* setup general liodn offsets */ set_liodn(liodn_tbl, liodn_tbl_sz); +#ifdef CONFIG_SYS_SRIO /* setup SRIO port liodns */ set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz); +#endif /* setup SEC block liodn bases & offsets if we have one */ if (IS_E_PROCESSOR(get_svr())) { @@ -219,6 +223,7 @@ void set_liodns(void) #endif } +#ifdef CONFIG_SYS_SRIO static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) { int i, srio_off; @@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) } } } +#endif + +#define CONFIG_SYS_MAX_PCI_EPS 8 +#define CONFIG_SYS_PCI_EP_LIODN_START 256 + +static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) +{ + int off, pci_idx = 0, pci_cnt = 0, i, rc; + const uint32_t *base_liodn; + uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 }; + + /* + * Count the number of pci nodes. + * It's needed later when the interleaved liodn offsets are generated. + */ + off = fdt_node_offset_by_compatible(fdt, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + pci_cnt++; + off = fdt_node_offset_by_compatible(fdt, off, compat); + } + + for (off = fdt_node_offset_by_compatible(fdt, -1, compat); + off != -FDT_ERR_NOTFOUND; + off = fdt_node_offset_by_compatible(fdt, off, compat)) { + base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc); + if (!base_liodn) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Could not get liodn of node %s: %s\n", + path, fdt_strerror(rc)); + continue; + } + for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++) + liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START + + i * pci_cnt + pci_idx - *base_liodn; + rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list", + liodn_offs, sizeof(liodn_offs)); + if (rc) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Unable to set fsl,liodn-offset-list for " + "node %s: %s\n", path, fdt_strerror(rc)); + continue; + } + pci_idx++; + } +} static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) { @@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) void fdt_fixup_liodn(void *blob) { +#ifdef CONFIG_SYS_SRIO fdt_fixup_srio_liodn(blob, srio_liodn_tbl); +#endif fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz); #ifdef CONFIG_SYS_DPAA_FMAN @@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob) #ifdef CONFIG_SYS_DPAA_RMAN fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz); #endif + + fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4"); } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ffc2a9ad65..e1197ac9e5 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -27,9 +27,13 @@ #include #include #include +#include #include "mp.h" DECLARE_GLOBAL_DATA_PTR; +u32 fsl_ddr_get_intl3r(void); + +extern u32 __spin_table[]; u32 get_my_id() { @@ -76,17 +80,16 @@ int cpu_status(int nr) return 0; if (nr == id) { - table = (u32 *)get_spin_virt_addr(); + table = (u32 *)&__spin_table; printf("table base @ 0x%p\n", table); } else { - table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); - printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); - printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]); + printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); } return 0; @@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = { 0, BOOT_ENTRY_PIR, BOOT_ENTRY_R3_LOWER, - BOOT_ENTRY_R6_LOWER, }; int cpu_release(int nr, int argc, char * const argv[]) { - u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; u64 boot_addr; if (hold_cores_in_reset(1)) @@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[]) boot_addr = simple_strtoull(argv[0], NULL, 16); - /* handle pir, r3, r6 */ - for (i = 1; i < 4; i++) { + /* handle pir, r3 */ + for (i = 1; i < 3; i++) { if (argv[i][0] != '-') { u8 entry = boot_entry_map[i]; val = simple_strtoul(argv[i], NULL, 16); @@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[]) return 0; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { - /* if we have 4G or more of memory, put the boot page at 4Gb-4k */ - if ((u64)gd->ram_size > 0xfffff000) - return (0xfffff000); + u32 bootpg; +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + u32 svr = get_svr(); + u32 granule_size, check; + struct law_entry e; +#endif - return (gd->ram_size - 4096); -} -ulong get_spin_phys_addr(void) -{ - extern ulong __secondary_start_page; - extern ulong __spin_table; + /* use last 4K of mapped memory */ + bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size) + + CONFIG_SYS_SDRAM_BASE - 4096; + if (pagesize) + *pagesize = 4096; + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 +/* + * Erratum A004468 has two parts. The 3-way interleaving applies to T4240, + * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But + * the way boot page chosen in u-boot avoids hitting this erratum. So only + * thw workaround for 3-way interleaving is needed. + * + * To make sure boot page translation works with 3-Way DDR interleaving + * enforce a check for the following constrains + * 8K granule size requires BRSIZE=8K and + * bootpg >> log2(BRSIZE) %3 == 1 + * 4K and 1K granule size requires BRSIZE=4K and + * bootpg >> log2(BRSIZE) %3 == 0 + */ + if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) { + e = find_law(bootpg); + switch (e.trgt_id) { + case LAW_TRGT_IF_DDR_INTLV_123: + granule_size = fsl_ddr_get_intl3r() & 0x1f; + if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) { + if (pagesize) + *pagesize = 8192; + bootpg &= 0xffffe000; /* align to 8KB */ + check = bootpg >> 13; + while ((check % 3) != 1) + check--; + bootpg = check << 13; + debug("Boot page (8K) at 0x%08x\n", bootpg); + break; + } else { + bootpg &= 0xfffff000; /* align to 4KB */ + check = bootpg >> 12; + while ((check % 3) != 0) + check--; + bootpg = check << 12; + debug("Boot page (4K) at 0x%08x\n", bootpg); + } + break; + default: + break; + } + } +#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */ - return (determine_mp_bootpg() + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return bootpg; } -ulong get_spin_virt_addr(void) +phys_addr_t get_spin_phys_addr(void) { - extern ulong __secondary_start_page; - extern ulong __spin_table; - - return (CONFIG_BPTR_VIRT_ADDR + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return virt_to_phys(&__spin_table); } #ifdef CONFIG_FSL_CORENET -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { - u32 cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K; + u32 *table = (u32 *)&__spin_table; volatile ccsr_gur_t *gur; volatile ccsr_local_t *ccm; volatile ccsr_rcpm_t *rcpm; @@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg) out_be32(&ccm->bstrl, bootpg); e = find_law(bootpg); - out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K); + /* pagesize is only 4K or 8K */ + if (pagesize == 8192) + brsize = LAW_SIZE_8K; + out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize); + debug("BRSIZE is 0x%x\n", brsize); /* readback to sync write */ in_be32(&ccm->bstrar); @@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg) #endif } #else -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { u32 up, cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 *table = (u32 *)&__spin_table; volatile u32 bpcr; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); lmb_reserve(lmb, bootpg, 4096); } void setup_mp(void) { - extern ulong __secondary_start_page; - extern ulong __bootpg_addr; - ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + extern u32 __secondary_start_page; + extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page; + + int i; + ulong fixup = (u32)&__secondary_start_page; + u32 bootpg, bootpg_map, pagesize; + + bootpg = determine_mp_bootpg(&pagesize); + + /* + * pagesize is only 4K or 8K + * we only use the last 4K of boot page + * bootpg_map saves the address for the boot page + * 8K is used for the workaround of 3-way DDR interleaving + */ + + bootpg_map = bootpg; + + if (pagesize == 8192) + bootpg += 4096; /* use 2nd half */ /* Some OSes expect secondary cores to be held in reset */ if (hold_cores_in_reset(0)) return; - /* Store the bootpg's SDRAM address for use by secondary CPU cores */ - __bootpg_addr = bootpg; + /* + * Store the bootpg's cache-able half address for use by secondary + * CPU cores to continue to boot + */ + __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page); + + /* Store spin table's physical address for use by secondary cores */ + __spin_table_addr = (u32)get_spin_phys_addr(); + + /* flush bootpg it before copying invalidate any staled cacheline */ + flush_cache(bootpg, 4096); /* look for the tlb covering the reset page, there better be one */ - int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); + i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); /* we found a match */ if (i != -1) { @@ -407,7 +480,7 @@ void setup_mp(void) memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096); - plat_mp_up(bootpg); + plat_mp_up(bootpg_map, pagesize); } else { puts("WARNING: No reset page TLB. " "Skipping secondary core setup\n"); diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h index 87bac37152..ad9950bcf5 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.h +++ b/arch/powerpc/cpu/mpc85xx/mp.h @@ -3,8 +3,7 @@ #include -ulong get_spin_phys_addr(void); -ulong get_spin_virt_addr(void); +phys_addr_t get_spin_phys_addr(void); u32 get_my_id(void); int hold_cores_in_reset(int verbose); @@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose); #define BOOT_ENTRY_PIR 5 #define BOOT_ENTRY_R6_UPPER 6 #define BOOT_ENTRY_R6_LOWER 7 -#define NUM_BOOT_ENTRY 8 +#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */ #define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) #endif diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c new file mode 100644 index 0000000000..878ee3e73e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c @@ -0,0 +1,127 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 2, 1, 0), + SET_QP_INFO(3, 4, 2, 1), + SET_QP_INFO(5, 6, 3, 2), + SET_QP_INFO(7, 8, 4, 3), + SET_QP_INFO(9, 10, 5, 0), + SET_QP_INFO(11, 12, 6, 1), + SET_QP_INFO(13, 14, 7, 2), + SET_QP_INFO(15, 16, 8, 3), + SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */ +}; +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), +#endif + + SET_SDHC_LIODN(1, 64), + + SET_USB_LIODN(1, "fsl-usb2-mph", 93), + SET_USB_LIODN(2, "fsl-usb2-dr", 94), + + SET_SATA_LIODN(1, 95), + SET_SATA_LIODN(2, 96), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197), + + SET_DMA_LIODN(1, 193), + SET_DMA_LIODN(2, 194), +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 6), + SET_FMAN_RX_1G_LIODN(1, 1, 7), + SET_FMAN_RX_1G_LIODN(1, 2, 8), + SET_FMAN_RX_1G_LIODN(1, 3, 9), + SET_FMAN_RX_1G_LIODN(1, 4, 10), + SET_FMAN_RX_10G_LIODN(1, 0, 11), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 12), + SET_FMAN_RX_1G_LIODN(2, 1, 13), + SET_FMAN_RX_1G_LIODN(2, 2, 14), + SET_FMAN_RX_1G_LIODN(2, 3, 15), + SET_FMAN_RX_1G_LIODN(2, 4, 16), + SET_FMAN_RX_10G_LIODN(2, 0, 17), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 129, 130), + SET_SEC_JR_LIODN_ENTRY(1, 131, 132), + SET_SEC_JR_LIODN_ENTRY(2, 133, 134), + SET_SEC_JR_LIODN_ENTRY(3, 135, 136), + SET_SEC_RTIC_LIODN_ENTRY(a, 89), + SET_SEC_RTIC_LIODN_ENTRY(b, 90), + SET_SEC_RTIC_LIODN_ENTRY(c, 91), + SET_SEC_RTIC_LIODN_ENTRY(d, 92), + SET_SEC_DECO_LIODN_ENTRY(0, 139, 140), + SET_SEC_DECO_LIODN_ENTRY(1, 141, 142), + SET_SEC_DECO_LIODN_ENTRY(2, 143, 144), + SET_SEC_DECO_LIODN_ENTRY(3, 145, 146), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct liodn_id_table raide_liodn_tbl[] = { + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), +}; +int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#endif +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160), +#endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c new file mode 100644 index 0000000000..890b88e4e3 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c @@ -0,0 +1,117 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "fsl_corenet_serdes.h" + +/* + * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but + * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in + * this table. This works because most of the SerDes code is for errata + * work-arounds, and there are no P5040 errata that effect bank 4. + */ + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ }, + [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, + NONE, NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* NONE, NONE */ }, + [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) +{ + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 6199633541..b59ef69f1f 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&qman->ip_rev_1); + u32 rev_2 = in_be32(&qman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; + ip_cfg = rev_2 & 0xff; - compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1; + compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); @@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&bman->ip_rev_1); + u32 rev_2 = in_be32(&bman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; - compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1; + ip_cfg = rev_2 & 0xff; + + compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 22e73e0661..4ba44a9028 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -150,29 +150,33 @@ __secondary_start_page: #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ - lis r3,toreset(__spin_table)@h - ori r3,r3,toreset(__spin_table)@l + lis r3,toreset(__spin_table_addr)@h + ori r3,r3,toreset(__spin_table_addr)@l + lwz r3,0(r3) - /* r10 has the base address for the entry */ + /* + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB + */ mfspr r0,SPRN_PIR #if defined(CONFIG_E6500) /* * PIR definition for E6500 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2’b00 - SoC 1 + * 8-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved - * 20-24 CLUSTER_ID 5’b00000 - CCM 1 + * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved - * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1 - * 2’b01 - cluster 2 - * 2’b10 - cluster 3 - * 2’b11 - cluster 4 - * 27-28 CORE_ID 2’b00 - core 0 - * 2’b01 - core 1 - * 2’b10 - core 2 - * 2’b11 - core 3 - * 29-31 THREAD_ID 3’b000 - thread 0 - * 3’b001 - thread 1 + * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1 + * 2'b01 - cluster 2 + * 2'b10 - cluster 3 + * 2'b11 - cluster 4 + * 27-28 CORE_ID 2'b00 - core 0 + * 2'b01 - core 1 + * 2'b10 - core 2 + * 2'b11 - core 3 + * 29-31 THREAD_ID 3'b000 - thread 0 + * 3'b001 - thread 1 */ rlwinm r4,r0,29,25,31 #elif defined(CONFIG_E500MC) @@ -180,16 +184,9 @@ __secondary_start_page: #else mr r4,r0 #endif - slwi r8,r4,5 + slwi r8,r4,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - slwi r8,r4,1 - addi r8,r8,32 - mtspr L1CSR2,r8 -#endif - #ifdef CONFIG_E6500 mfspr r0,SPRN_PIR /* @@ -209,6 +206,13 @@ __secondary_start_page: mtspr SPRN_PIR,r4 /* write to PIR register */ +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + slwi r8,r4,1 + addi r8,r8,32 + mtspr L1CSR2,r8 +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -277,73 +281,111 @@ __secondary_start_page: beq 2b #endif 3: - -#define EPAPR_MAGIC (0x45504150) -#define ENTRY_ADDR_UPPER 0 -#define ENTRY_ADDR_LOWER 4 -#define ENTRY_R3_UPPER 8 -#define ENTRY_R3_LOWER 12 -#define ENTRY_RESV 16 -#define ENTRY_PIR 20 -#define ENTRY_R6_UPPER 24 -#define ENTRY_R6_LOWER 28 -#define ENTRY_SIZE 32 - - /* setup the entry */ - li r3,0 - li r8,1 - stw r4,ENTRY_PIR(r10) - stw r3,ENTRY_ADDR_UPPER(r10) - stw r8,ENTRY_ADDR_LOWER(r10) - stw r3,ENTRY_R3_UPPER(r10) - stw r4,ENTRY_R3_LOWER(r10) - stw r3,ENTRY_R6_UPPER(r10) - stw r3,ENTRY_R6_LOWER(r10) - - /* load r13 with the address of the 'bootpg' in SDRAM */ - lis r13,toreset(__bootpg_addr)@h - ori r13,r13,toreset(__bootpg_addr)@l + /* setup mapping for the spin table, WIMGE=0b00100 */ + lis r13,toreset(__spin_table_addr)@h + ori r13,r13,toreset(__spin_table_addr)@l lwz r13,0(r13) + /* mask by 4K */ + rlwinm r13,r13,0,0,19 - /* setup mapping for AS = 1, and jump there */ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h mtspr SPRN_MAS0,r11 lis r11,(MAS1_VALID|MAS1_IPROT)@h ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r11 - oris r11,r13,(MAS2_I|MAS2_G)@h - ori r11,r13,(MAS2_I|MAS2_G)@l + oris r11,r13,(MAS2_M|MAS2_G)@h + ori r11,r13,(MAS2_M|MAS2_G)@l mtspr SPRN_MAS2,r11 oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l mtspr SPRN_MAS3,r11 + li r11,0 + mtspr SPRN_MAS7,r11 tlbwe - bl 1f -1: mflr r11 /* - * OR in 0xfff to create a mask of the bootpg SDRAM address. We use - * this mask to fixup the cpu spin table and the address that we want - * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the - * bootpg is at 0x7ffff000 in SDRAM. + * __bootpg_addr has the address of __second_half_boot_page + * jump there in AS=1 space with cache enabled */ - ori r13,r13,0xfff - and r11, r11, r13 - and r10, r10, r13 - - addi r11,r11,(2f-1b) + lis r13,toreset(__bootpg_addr)@h + ori r13,r13,toreset(__bootpg_addr)@l + lwz r11,0(r13) + mtspr SPRN_SRR0,r11 mfmsr r13 ori r12,r13,MSR_IS|MSR_DS@l - - mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 rfi + /* + * Allocate some space for the SDRAM address of the bootpg. + * This variable has to be in the boot page so that it can + * be accessed by secondary cores when they come out of reset. + */ + .align L1_CACHE_SHIFT + .globl __bootpg_addr +__bootpg_addr: + .long 0 + + .global __spin_table_addr +__spin_table_addr: + .long 0 + + /* + * This variable is set by cpu_init_r() after parsing hwconfig + * to enable workaround for erratum NMG_CPU_A011. + */ + .align L1_CACHE_SHIFT + .global enable_cpu_a011_workaround +enable_cpu_a011_workaround: + .long 1 + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page + + +/* this is a separated page for the spin table and cacheable boot code */ + .align L1_CACHE_SHIFT + .global __second_half_boot_page +__second_half_boot_page: +#define EPAPR_MAGIC 0x45504150 +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_SIZE 64 + /* + * setup the entry + * r10 has the base address of the spin table. + * spin table is defined as + * struct { + * uint64_t entry_addr; + * uint64_t r3; + * uint32_t rsvd1; + * uint32_t pir; + * }; + * we pad this struct to 64 bytes so each entry is in its own cacheline + */ + li r3,0 + li r8,1 + mfspr r4,SPRN_PIR + stw r3,ENTRY_ADDR_UPPER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_RESV(r10) + stw r4,ENTRY_PIR(r10) + msync + stw r8,ENTRY_ADDR_LOWER(r10) + /* spin waiting for addr */ -2: - lwz r4,ENTRY_ADDR_LOWER(r10) +3: lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 - bne 2b + bne 3b isync /* setup IVORs to match fixed offsets */ @@ -362,11 +404,20 @@ __secondary_start_page: /* mask by ~64M to setup our tlb we will jump to */ rlwinm r12,r4,0,0,5 - /* setup r3, r4, r5, r6, r7, r8, r9 */ + /* + * setup r3, r4, r5, r6, r7, r8, r9 + * r3 contains the value to put in the r3 register at secondary cpu + * entry. The high 32-bits are ignored on 32-bit chip implementations. + * 64-bit chip implementations however shall load all 64-bits + */ +#ifdef CONFIG_SYS_PPC64 + ld r3,ENTRY_R3_UPPER(r10) +#else lwz r3,ENTRY_R3_LOWER(r10) +#endif li r4,0 li r5,0 - lwz r6,ENTRY_R6_LOWER(r10) + li r6,0 lis r7,(64*1024*1024)@h li r8,0 li r9,0 @@ -404,32 +455,10 @@ __secondary_start_page: mtspr SPRN_SRR1,r13 rfi - /* - * Allocate some space for the SDRAM address of the bootpg. - * This variable has to be in the boot page so that it can - * be accessed by secondary cores when they come out of reset. - */ - .globl __bootpg_addr -__bootpg_addr: - .long 0 - .align L1_CACHE_SHIFT + .align 6 .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE - - /* - * This variable is set by cpu_init_r() after parsing hwconfig - * to enable workaround for erratum NMG_CPU_A011. - */ - .align L1_CACHE_SHIFT - .global enable_cpu_a011_workaround -enable_cpu_a011_workaround: - .long 1 - - /* Fill in the empty space. The actual reset vector is - * the last word of the page */ -__secondary_start_code_end: - .space 4092 - (__secondary_start_code_end - __secondary_start_page) -__secondary_reset_vector: - b __secondary_start_page +__spin_table_end: + .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc85xx/serial_scc.c b/arch/powerpc/cpu/mpc85xx/serial_scc.c index fe9af55c7a..6345362d88 100644 --- a/arch/powerpc/cpu/mpc85xx/serial_scc.c +++ b/arch/powerpc/cpu/mpc85xx/serial_scc.c @@ -220,13 +220,6 @@ static void mpc85xx_serial_putc(const char c) tbdf->cbd_sc |= BD_SC_READY; } -static void mpc85xx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc85xx_serial_getc(void) { volatile cbd_t *rbdf; @@ -268,7 +261,7 @@ static struct serial_device mpc85xx_serial_drv = { .stop = NULL, .setbrg = mpc85xx_serial_setbrg, .putc = mpc85xx_serial_putc, - .puts = mpc85xx_serial_puts, + .puts = default_serial_puts, .getc = mpc85xx_serial_getc, .tstc = mpc85xx_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index abfeb268d4..801ee078c0 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR; void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_IFC + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 ccr; +#endif #ifdef CONFIG_FSL_CORENET volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); unsigned int cpu; @@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; - uint ratio[4]; + uint i, freqCC_PLL[6], rcw_tmp; + uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; sysInfo->freqSystemBus = sysclk; +#ifdef CONFIG_DDR_CLK_FREQ + sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; +#else sysInfo->freqDDRBus = sysclk; +#endif sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f; + mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> + FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) + & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) sysInfo->freqDDRBus *= mem_pll_rat; else @@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo) ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; - for (i = 0; i < 4; i++) { + ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f; + ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; + for (i = 0; i < 6; i++) { if (ratio[i] > 4) freqCC_PLL[i] = sysclk * ratio[i]; else freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; } - rcw_tmp = in_be32(&gur->rcwsr[3]); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* + * Each cluster has up to 4 cores, sharing the same PLL selection. + * The cluster assignment is fixed per SoC. There is no way identify the + * assignment so far, presuming the "first configuration" which is to + * fill the lower cluster group first before moving up to next group. + * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 + * and core 4~7 on cluster 2 + * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 + * and core 12~15 on cluster 4 if existing + */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + if (cplx_pll > 3) + printf("Unsupported architecture configuration" + " in function %s\n", __func__); + cplx_pll += (cpu / 8) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#define PME_CLK_SEL 0xe0000000 +#define PME_CLK_SHIFT 29 +#define FM1_CLK_SEL 0x1c000000 +#define FM1_CLK_SHIFT 26 + rcw_tmp = in_be32(&gur->rcwsr[7]); + +#ifdef CONFIG_SYS_DPAA_PME + switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { + case 1: + sysInfo->freqPME = freqCC_PLL[0]; + break; + case 2: + sysInfo->freqPME = freqCC_PLL[0] / 2; + break; + case 3: + sysInfo->freqPME = freqCC_PLL[0] / 3; + break; + case 4: + sysInfo->freqPME = freqCC_PLL[0] / 4; + break; + case 6: + sysInfo->freqPME = freqCC_PLL[1] / 2; + break; + case 7: + sysInfo->freqPME = freqCC_PLL[1] / 3; + break; + default: + printf("Error: Unknown PME clock select!\n"); + case 0: + sysInfo->freqPME = sysInfo->freqSystemBus / 2; + break; + } +#endif + +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[0] = freqCC_PLL[3]; + break; + case 2: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + break; + case 3: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + break; + case 4: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + break; + case 6: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + break; + case 7: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + break; + default: + printf("Error: Unknown FMan1 clock select!\n"); + case 0: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + break; + } +#if (CONFIG_SYS_NUM_FMAN) == 2 +#define FM2_CLK_SEL 0x00000038 +#define FM2_CLK_SHIFT 3 + rcw_tmp = in_be32(&gur->rcwsr[15]); + switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[1] = freqCC_PLL[4]; + break; + case 2: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + break; + case 3: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + break; + case 4: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + break; + case 6: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + break; + case 7: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + break; + default: + printf("Error: Unknown FMan2 clock select!\n"); + case 0: + sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + break; + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_SYS_DPAA_FMAN */ + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + + for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + + sysInfo->freqProcessor[cpu] = + freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 #define HWA_ASYNC_DIV 0x04000000 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) #define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3) +#define HWA_CC_PLL 2 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) #define HWA_CC_PLL 2 #else @@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif -#else - uint plat_ratio,e500_ratio,half_freqSystemBus; -#if defined(CONFIG_FSL_LBC) - uint lcrr_div; -#endif +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#else /* CONFIG_FSL_CORENET */ + uint plat_ratio, e500_ratio, half_freqSystemBus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif /* CONFIG_FSL_CORENET */ #if defined(CONFIG_FSL_LBC) + uint lcrr_div; #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; @@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqLocalBus = lcrr_div; } #endif + +#if defined(CONFIG_FSL_IFC) + ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; + + sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9e04257d2c..ac17f9d3ca 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -169,7 +169,7 @@ l2_disabled: * */ -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) +#ifdef CONFIG_SYS_CACHE_STASHING /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ li r2,(32 + 0) mtspr L1CSR2,r2 @@ -211,6 +211,77 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb1_entry esel scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb0_entry esel epn wimg scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + isync + msync + tlbwe + isync + .endm + #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) /* * TLB entry for debuggging in AS1 @@ -220,61 +291,35 @@ l2_disabled: * in AS1. */ - lis r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l - #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. * and this window is outside of 4K boot window. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * because "nexti" will resize TLB to 4K */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, - (MAS2_I))@l - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - tlbwe - isync #endif /* @@ -392,27 +437,11 @@ l2_disabled: */ /* create a temp mapping TLB0[0] for LBCR */ - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ + 0, r6 /* Set LBCR register */ lis r4,CONFIG_SYS_LBCR_ADDR@h @@ -551,49 +580,22 @@ create_ccsr_new_tlb: ori r8, r8, CONFIG_SYS_CCSRBAR@l lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe - + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 /* * Create a TLB for the current location of CCSR. Register R9 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - li r7, 0 /* The default CCSR address is always a 32-bit number */ - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - /* MAS1 is the same as above */ - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe + create_tlb0_entry 1, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ + 0, r3 /* The default CCSR address is always a 32-bit number */ + /* * We have a TLB for what we think is the current (old) CCSR. Let's @@ -743,29 +745,46 @@ write_new_ccsrbar: /* Delete the temporary TLBs */ delete_temp_tlbs: - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - li r1, 0 - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - isync - msync - tlbwe + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS2, r2 - isync - msync - tlbwe #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +create_ccsr_l2_tlb: + /* + * Create a TLB for the MMR location of CCSR + * to access L2CSR0 register + */ + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + +enable_l2_cluster_l2: + /* enable L2 cache */ + lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + li r4, 33 /* stash id */ + stw r4, 4(r3) + lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l + sync + stw r4, 0(r3) /* invalidate L2 */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + bne 1b + lis r4, L2CSR0_L2E@h + sync + stw r4, 0(r3) /* eanble L2 */ +delete_ccsr_l2_tlb: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 +#endif + #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 @@ -1019,83 +1038,50 @@ create_init_ram_area: #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS=1 to the 4M boot window */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS = 1 for Flash mapping * created by PBL for ISBC code */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - /* create a temp mapping in AS=1 to the stack */ - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l - #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH - mtspr MAS7,r10 + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + #else - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - lis r6,MSR_IS|MSR_DS|MSR_DE@h ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c new file mode 100644 index 0000000000..a8f16b1cd6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 4), + SET_QP_INFO(10, 36, 1, 4), + SET_QP_INFO(11, 37, 1, 5), + SET_QP_INFO(12, 38, 1, 5), + SET_QP_INFO(13, 39, 1, 6), + SET_QP_INFO(14, 40, 1, 6), + SET_QP_INFO(15, 41, 1, 7), + SET_QP_INFO(16, 42, 1, 7), + SET_QP_INFO(17, 43, 1, 8), + SET_QP_INFO(18, 44, 1, 8), + SET_QP_INFO(19, 45, 1, 9), + SET_QP_INFO(20, 46, 1, 9), + SET_QP_INFO(21, 47, 1, 10), + SET_QP_INFO(22, 48, 1, 10), + SET_QP_INFO(23, 49, 1, 11), + SET_QP_INFO(24, 50, 1, 11), + SET_QP_INFO(65, 89, 1, 0), + SET_QP_INFO(66, 90, 1, 0), + SET_QP_INFO(67, 91, 1, 1), + SET_QP_INFO(68, 92, 1, 1), + SET_QP_INFO(69, 93, 1, 2), + SET_QP_INFO(70, 94, 1, 2), + SET_QP_INFO(71, 95, 1, 3), + SET_QP_INFO(72, 96, 1, 3), + SET_QP_INFO(73, 97, 1, 4), + SET_QP_INFO(74, 98, 1, 4), + SET_QP_INFO(75, 99, 1, 5), + SET_QP_INFO(76, 100, 1, 5), + SET_QP_INFO(77, 101, 1, 6), + SET_QP_INFO(78, 102, 1, 6), + SET_QP_INFO(79, 103, 1, 7), + SET_QP_INFO(80, 104, 1, 7), + SET_QP_INFO(81, 105, 1, 8), + SET_QP_INFO(82, 106, 1, 8), + SET_QP_INFO(83, 107, 1, 9), + SET_QP_INFO(84, 108, 1, 9), + SET_QP_INFO(85, 109, 1, 10), + SET_QP_INFO(86, 110, 1, 10), + SET_QP_INFO(87, 111, 1, 11), + SET_QP_INFO(88, 112, 1, 11), + SET_QP_INFO(25, 51, 1, 0), + SET_QP_INFO(26, 52, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 88), + SET_FMAN_RX_1G_LIODN(2, 1, 89), + SET_FMAN_RX_1G_LIODN(2, 2, 90), + SET_FMAN_RX_1G_LIODN(2, 3, 91), + SET_FMAN_RX_1G_LIODN(2, 4, 92), + SET_FMAN_RX_1G_LIODN(2, 5, 93), + SET_FMAN_RX_10G_LIODN(2, 0, 94), + SET_FMAN_RX_10G_LIODN(2, 1, 95), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c new file mode 100644 index 0000000000..102defa560 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -0,0 +1,237 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC10, XAUI_FM2_MAC10, + XAUI_FM2_MAC10, XAUI_FM2_MAC10}}, + {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {57, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {} +}; +static struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, + {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, + serdes3_cfg_tbl, + serdes4_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 929f6a607e..a548dec9a7 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; - unsigned int wimge = 0; + unsigned int wimge = MAS2_M; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam; u64 size, memsize = (u64)memsize_in_meg << 20; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index 8ba9399169..f7c4a22d29 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -70,9 +70,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 668158f702..46dbaed1e0 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -53,6 +53,10 @@ SECTIONS } _edata = .; + .u_boot_list : { + #include + } + . = ALIGN(8); __init_begin = .; __init_end = .; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index efe34b774d..4a40a1f51b 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -77,9 +77,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 61f5110b7d..2f955fe930 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP int off; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); #endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 30c99ebc56..de705f0ae8 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[]) return 1; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { + if (pagesize) + *pagesize = 4096; + /* if we have 4G or more of memory, put the boot page at 4Gb-1M */ if ((u64)gd->ram_size > 0xfffff000) return (0xfff00000); @@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); /* tell u-boot we stole a page */ lmb_reserve(lmb, bootpg, 4096); @@ -115,7 +118,7 @@ void setup_mp(void) { extern ulong __secondary_start_page; ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); u32 bootpg_va; if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) { diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds index 121e529876..8bfadf28dc 100644 --- a/arch/powerpc/cpu/mpc86xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds @@ -64,9 +64,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 78a8f926b3..2c487cac20 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P5010, P5010, 1), CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5021, P5021, 2), + CPU_TYPE_ENTRY(P5040, P5040, 4), + CPU_TYPE_ENTRY(T4240, T4240, 0), + CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(B4860, B4860, 0), + CPU_TYPE_ENTRY(G4860, G4860, 0), + CPU_TYPE_ENTRY(G4060, G4060, 0), + CPU_TYPE_ENTRY(B4440, B4440, 0), + CPU_TYPE_ENTRY(G4440, G4440, 0), + CPU_TYPE_ENTRY(B4420, B4420, 0), + CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), #elif defined(CONFIG_MPC86xx) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 2592873c9f..5928eb8806 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ #if !defined(CONFIG_FSL_DDR1) +static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) +{ +#if CONFIG_DIMM_SLOTS_PER_CTLR == 1 + if (dimm_params[0].n_ranks == 4) + return 1; +#endif + +#if CONFIG_DIMM_SLOTS_PER_CTLR == 2 + if ((dimm_params[0].n_ranks == 2) && + (dimm_params[1].n_ranks == 2)) + return 1; + +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (dimm_params[0].n_ranks == 4) + return 1; +#endif +#endif + return 0; +} + /* * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) * @@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) * dreams up non-zero default values to be backwards compatible. */ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) + const memctl_options_t *popts, + const dimm_params_t *dimm_params) { unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ @@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ - trwt_mclk = 1; + + /* + * for single quad-rank DIMM and two dual-rank DIMMs + * to avoid ODT overlap + */ + if (avoid_odt_overlap(dimm_params)) { + twwt_mclk = 2; + trrt_mclk = 1; + } + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1; + if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving)) twrt_mclk = 1; @@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, | ((caslat_ctrl & 0xF) << 16) | ((refrec_ctrl & 0xF) << 12) | ((wrrec_mclk & 0x0F) << 8) - | ((acttoact_mclk & 0x07) << 4) - | ((wrtord_mclk & 0x07) << 0) + | ((acttoact_mclk & 0x0F) << 4) + | ((wrtord_mclk & 0x0F) << 0) ); debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); } @@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int dqs_cfg; /* DQS configuration */ unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ + unsigned int slow = 0; /* DDR will be run less than 1250 */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, obc_cfg = 0; #endif +#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) + slow = get_ddr_freq(0) < 1249000000; +#endif + if (popts->registered_dimm_en) { rcw_en = 1; ap_en = popts->ap_en; @@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((dqs_cfg & 0x3) << 26) | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) + | ((slow & 1) << 11) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, | ((wrlvl_start & 0x1F) << 0) ); debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl); + ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2; + debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2); + ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3; + debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3); + } /* DDR Self Refresh Counter (DDR_SR_CNTR) */ @@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1); } +static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) +{ + ddr->ddr_cdr2 = popts->ddr_cdr2; + debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2); +} + unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) { @@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, break; } sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; } else if (!popts->memctl_interleaving) { /* * If memory interleaving between controllers is NOT @@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: if ((i >= 2) && (dimm_number == 0)) { @@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, sa >>= 24; ea >>= 24; - ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16) /* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ - ); + if (cs_en) { + ddr->cs[i].bnds = (0 + | ((sa & 0xFFF) << 16)/* starting address MSB */ + | ((ea & 0xFFF) << 0) /* ending address MSB */ + ); + } else { + debug("FSLDDR: setting bnds to 0 for inactive CS\n"); + ddr->cs[i].bnds = 0; + } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - if (cs_en) { - set_csn_config(dimm_number, i, ddr, popts, dimm_params); - set_csn_config_2(i, ddr); - } else - debug("CS%d is disabled.\n", i); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); + set_csn_config_2(i, ddr); } /* @@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_FSL_DDR1) - set_timing_cfg_0(ddr, popts); + set_timing_cfg_0(ddr, popts, dimm_params); #endif set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); @@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); + set_ddr_cdr2(ddr, popts); set_ddr_sdram_cfg(ddr, popts, common_dimm); ip_rev = fsl_ddr_get_version(); if (ip_rev > 0x40400) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index f59d1051bf..cb71f94ba1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS(ddr_cdr1), + CTRL_OPTIONS(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_cdr2), CFG_REGS(err_disable), CFG_REGS(err_int_en), + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(err_int_en), CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_sdram_rcw_2), - + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS_HEX(ddr_cdr1), + CTRL_OPTIONS_HEX(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) * doesn't return */ do_reset(NULL, 0, 0, NULL); + printf("Reset didn't work\n"); } if (strcmp(argv[0], "recompute") == 0) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 03a784cd47..6a1f4e4e38 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, unsigned int compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, - unsigned int number_of_dimms) + const unsigned int number_of_dimms) { unsigned int i, j; @@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1++; continue; } + + /* + * check if quad-rank DIMM is plugged if + * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined + * Only the board with proper design is capable + */ +#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE if (dimm_params[i].n_ranks == 4 && \ CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) { printf("Found Quad-rank DIMM, not able to support."); temp1++; continue; } - +#endif /* * Find minimum tCKmax_ps to find fastest slow speed, * i.e., this is the slowest the whole system can go. @@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (outpdimm->all_DIMMs_registered) for (j = 0; j < 16; j++) { outpdimm->rcw[j] = dimm_params[0].rcw[j]; - for (i = 1; i < number_of_dimms; i++) + for (i = 1; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { temp1 = 1; break; } + } } if (temp1 != 0) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index b47268c20e..d6b73c7af1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) sizeof(generic_spd_eeprom_t)); if (ret) { - printf("DDR: failed to read SPD from address %u\n", i2c_address); + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } memset(spd, 0, sizeof(generic_spd_eeprom_t)); } } @@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void) #endif total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + /* setup 3-way interleaving before enabling DDRC */ + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } + /* Program configuration registers. */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); @@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void) case FSL_DDR_3WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_123; if (i == 0) { - fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode); fsl_ddr_set_lawbar(&info.common_timing_params[i], law_memctl, i); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 13e4825274..2f13b8fd93 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #endif + +/* + * Automatically seleect bank interleaving mode based on DIMMs + * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. + * This function only deal with one or two slots per controller. + */ +static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm) +{ +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; + else if (pdimm[0].n_ranks == 2) + return FSL_DDR_CS0_CS1; +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; +#endif + if (pdimm[0].n_ranks == 2) { + if (pdimm[1].n_ranks == 2) + return FSL_DDR_CS0_CS1_CS2_CS3; + else + return FSL_DDR_CS0_CS1; + } +#endif + return 0; +} + unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, @@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { switch (pdimm[0].n_ranks) { +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs " + "cannot be used together\n"); + break; +#endif case 2: switch (pdimm[1].n_ranks) { case 2: @@ -900,6 +936,9 @@ done: else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3", buf)) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; + else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", + "auto", buf)) + popts->ba_intlv_ctl = auto_bank_intlv(pdimm); else printf("hwconfig has unrecognized parameter for bank_intlv.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { @@ -912,6 +951,10 @@ done: "interleaving disabled!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + break; +#endif if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " @@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) break; } debug("%d of %d controllers are interleaving.\n", j, k); - if (j != k) { + if (j && (j != k)) { for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; printf("Not all controllers have compatible " diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 664ad09298..940ffff773 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size) #endif } +u32 fsl_ddr_get_intl3r(void) +{ + u32 val = 0; +#ifdef CONFIG_E6500 + u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); + val = *mcintl3r; +#endif + return val; +} + void board_add_ram_info(int use_default) { #if defined(CONFIG_MPC83xx) @@ -140,6 +150,18 @@ void board_add_ram_info(int use_default) uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); int cas_lat; +#if CONFIG_NUM_DDR_CONTROLLERS >= 2 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif +#if CONFIG_NUM_DDR_CONTROLLERS >= 3 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif puts(" (DDR"); switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) { diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 32ab050962..68db8e2448 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) const char *phys[] = { "ulpi", "utmi" }; const char *mode = NULL; const char *phy_type = NULL; + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; @@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } + for (j = 0; j < ARRAY_SIZE(phys); j++) { if (hwconfig_subarg_cmp(str, "phy_type", phys[j])) { @@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } - if (mode_idx >= 0) { - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - modes[mode_idx], NULL, usb_mode_off); - if (usb_mode_off < 0) - return; - } - if (phy_idx >= 0) { - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, phys[phy_idx], usb_phy_off); - if (usb_phy_off < 0) - return; - } + + dr_mode_type = modes[mode_idx]; + dr_phy_type = phys[phy_idx]; + + /* use usb_dr_mode and usb_phy_type if + usb1_defined = 0; these variables are to + be deprecated */ if (!strcmp(str, "usb1")) usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) + + if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); + return; + } } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, usb_phy_off); + + if (usb_phy_off < 0) + return; } + if (!usb1_defined) { int usb_off = -1; mode = getenv("usb_dr_mode"); phy_type = getenv("usb_phy_type"); - if (!mode && !phy_type) - return; - fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off); + if (mode || phy_type) { + printf("WARNING: usb_dr_mode and usb_phy_type " + "are to be deprecated soon. Use " + "hwconfig to set these values instead!!\n"); + fdt_fixup_usb_mode_phy_type(blob, mode, + phy_type, usb_off); + } } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index 0cb65b32e4..6e6f7dcc3f 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -22,7 +22,9 @@ #include #include #include +#include +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define SRIO_PORT_ACCEPT_ALL 0x10000001 #define SRIO_IB_ATMU_AR 0x80f55000 #define SRIO_OB_ATMU_AR_MAINT 0x80077000 @@ -31,10 +33,16 @@ #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */ #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */ #define SRIO_LCSBA1CSR 0x60000000 +#endif #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1 + #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2 +#else #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 +#endif #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) @@ -52,16 +60,206 @@ #error "No defines for DEVDISR_SRIO" #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +/* + * Erratum A-004034 + * Affects: SRIO + * Description: During port initialization, the SRIO port performs + * lane synchronization (detecting valid symbols on a lane) and + * lane alignment (coordinating multiple lanes to receive valid data + * across lanes). Internal errors in lane synchronization and lane + * alignment may cause failure to achieve link initialization at + * the configured port width. + * An SRIO port configured as a 4x port may see one of these scenarios: + * 1. One or more lanes fails to achieve lane synchronization. Depending + * on which lanes fail, this may result in downtraining from 4x to 1x + * on lane 0, 4x to 1x on lane R (redundant lane). + * 2. The link may fail to achieve lane alignment as a 4x, even though + * all 4 lanes achieve lane synchronization, and downtrain to a 1x. + * An SRIO port configured as a 1x port may fail to complete port + * initialization (PnESCSR[PU] never deasserts) because of scenario 1. + * Impact: SRIO port may downtrain to 1x, or may fail to complete + * link initialization. Once a port completes link initialization + * successfully, it will operate normally. + */ +static int srio_erratum_a004034(u8 port) +{ + serdes_corenet_t *srds_regs; + u32 conf_lane; + u32 init_lane; + int idx, first, last; + u32 i; + unsigned long long end_tick; + struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + conf_lane = (in_be32((void *)&srds_regs->srdspccr0) + >> (12 - port * 4)) & 0x3; + init_lane = (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + + /* + * Start a counter set to ~2 ms after the SERDES reset is + * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n + * corresponding to the SERDES bank/PLL for the SRIO port). + */ + if (in_be32((void *)&srds_regs->bank[0].rstctl) + & SRDS_RSTCTL_RSTDONE) { + /* + * Poll the port uninitialized status (SRIO PnESCSR[PO]) until + * PO=1 or the counter expires. If the counter expires, the + * port has failed initialization: go to recover steps. If PO=1 + * and the desired port width is 1x, go to normal steps. If + * PO = 1 and the desired port width is 4x, go to recover steps. + */ + end_tick = usec2ticks(2000) + get_ticks(); + do { + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + else + break; + } + } + } while (end_tick > get_ticks()); + + /* recover at most 3 times */ + for (i = 0; i < 3; i++) { + /* Set SRIO PnCCSR[PD]=1 */ + setbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* + * Set SRIO PnPCR[OBDEN] on the host to + * enable the discarding of any pending packets. + */ + setbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Wait 50 us */ + udelay(50); + /* Run sync command */ + isync(); + + if (port) + first = serdes_get_first_lane(SRIO2); + else + first = serdes_get_first_lane(SRIO1); + if (unlikely(first < 0)) + return -ENODEV; + if (conf_lane == 0x1) + last = first; + else + last = first + 3; + /* + * Set SERDES BnGCRm0[RRST]=0 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + clrbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 100 ns */ + udelay(1); + /* + * Set SERDES BnGCRm0[RRST]=1 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + setbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 300 ns */ + udelay(1); + + /* Write 1 to clear all bits in SRIO PnSLCSR */ + out_be32((void *)&srio_regs->impl.port[port].slcsr, + 0xffffffff); + /* Clear SRIO PnPCR[OBDEN] on the host */ + clrbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Set SRIO PnCCSR[PD]=0 */ + clrbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* Wait >= 24 ms */ + udelay(24000); + /* Poll the state of the port again */ + init_lane = + (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + } + } + if (i == 2) + return -ENODEV; + } + } else + return -ENODEV; + +host_ok: + /* Poll PnESCSR[OES] on the host until it is clear */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr) + & 0x10000)) { + out_be32(((void *)&srio_regs->lp_serial + .port[port].pescsr), 0xffffffff); + out_be32(((void *)&srio_regs->phys_err + .port[port].edcsr), 0); + out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0); + return 0; + } + } while (end_tick > get_ticks()); + + return -ENODEV; +} +#endif + void srio_init(void) { ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; int srio1_used = 0, srio2_used = 0; + u32 *devdisr; +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + devdisr = &gur->devdisr3; +#else + devdisr = &gur->devdisr; +#endif if (is_serdes_configured(SRIO1)) { set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS, law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE), LAW_TRGT_IF_RIO_1); srio1_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(0) < 0) + printf("SRIO1: enabled but port error\n"); + else +#endif printf("SRIO1: enabled\n"); } else { printf("SRIO1: disabled\n"); @@ -73,7 +271,13 @@ void srio_init(void) law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE), LAW_TRGT_IF_RIO_2); srio2_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(1) < 0) + printf("SRIO2: enabled but port error\n"); + else +#endif printf("SRIO2: enabled\n"); + } else { printf("SRIO2: disabled\n"); } @@ -82,20 +286,20 @@ void srio_init(void) #ifdef CONFIG_FSL_CORENET /* On FSL_CORENET devices we can disable individual ports */ if (!srio1_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO1); if (!srio2_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_SRIO2); #endif /* neither port is used - disable everything */ if (!srio1_used && !srio2_used) { - setbits_be32(&gur->devdisr, _DEVDISR_SRIO1); - setbits_be32(&gur->devdisr, _DEVDISR_SRIO2); - setbits_be32(&gur->devdisr, _DEVDISR_RMU); + setbits_be32(devdisr, _DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_RMU); } } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER void srio_boot_master(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index 2466b79594..a96ddd5577 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -78,9 +78,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index aa27741a92..03baaee1b7 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -27,6 +27,8 @@ #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." #endif +#define FSL_DDR_VER_4_7 47 + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -311,6 +313,7 @@ #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -331,6 +334,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -338,8 +342,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P3041) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -360,6 +366,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -367,8 +374,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -389,7 +398,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC13 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -398,6 +407,7 @@ #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -406,8 +416,11 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -426,12 +439,43 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + +#elif defined(CONFIG_PPC_P5040) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_SYS_NUM_FM2_DTSEC 5 +#define CONFIG_SYS_NUM_FM2_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_USB138 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_ERRATUM_A004699 +#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC +#define CONFIG_SYS_FSL_ERRATUM_A004510 +#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 +#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -445,6 +489,63 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_PPC_T4240) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 12 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 5 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_3 +#define CONFIG_SYS_FSL_SRDS_4 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_SYS_NUM_FM2_DTSEC 8 +#define CONFIG_SYS_NUM_FM2_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_A004468 +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + +#elif defined(CONFIG_PPC_B4860) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index e271342f08..640d3297d6 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -84,6 +84,8 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C #define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D +#define SDRAM_CS_CONFIG_EN 0x80000000 + /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 @@ -96,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_DBW_MASK 0x00180000 +#define SDRAM_CFG_DBW_SHIFT 19 #define SDRAM_CFG_32_BE 0x00080000 #define SDRAM_CFG_16_BE 0x00100000 #define SDRAM_CFG_8_BE 0x00040000 @@ -145,6 +148,31 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; /* DDR_CDR1 */ #define DDR_CDR1_DHC_EN 0x80000000 +#define DDR_CDR1_ODT_SHIFT 17 +#define DDR_CDR1_ODT_MASK 0x6 +#define DDR_CDR2_ODT_MASK 0x1 +#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) +#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) + +#if (defined(CONFIG_SYS_FSL_DDR_VER) && \ + (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)) +#define DDR_CDR_ODT_OFF 0x0 +#define DDR_CDR_ODT_120ohm 0x1 +#define DDR_CDR_ODT_180ohm 0x2 +#define DDR_CDR_ODT_75ohm 0x3 +#define DDR_CDR_ODT_110ohm 0x4 +#define DDR_CDR_ODT_60hm 0x5 +#define DDR_CDR_ODT_70ohm 0x6 +#define DDR_CDR_ODT_47ohm 0x7 +#else +#define DDR_CDR_ODT_75ohm 0x0 +#define DDR_CDR_ODT_55ohm 0x1 +#define DDR_CDR_ODT_60ohm 0x2 +#define DDR_CDR_ODT_50ohm 0x3 +#define DDR_CDR_ODT_150ohm 0x4 +#define DDR_CDR_ODT_43ohm 0x5 +#define DDR_CDR_ODT_120ohm 0x6 +#endif /* Record of register values computed */ typedef struct fsl_ddr_cfg_regs_s { @@ -177,6 +205,8 @@ typedef struct fsl_ddr_cfg_regs_s { unsigned int timing_cfg_5; unsigned int ddr_zq_cntl; unsigned int ddr_wrlvl_cntl; + unsigned int ddr_wrlvl_cntl_2; + unsigned int ddr_wrlvl_cntl_3; unsigned int ddr_sr_cntr; unsigned int ddr_sdram_rcw_1; unsigned int ddr_sdram_rcw_2; @@ -262,6 +292,8 @@ typedef struct memctl_options_s { unsigned int wrlvl_override; unsigned int wrlvl_sample; /* Write leveling */ unsigned int wrlvl_start; + unsigned int wrlvl_ctl_2; + unsigned int wrlvl_ctl_3; unsigned int half_strength_driver_enable; unsigned int twoT_en; @@ -288,6 +320,7 @@ typedef struct memctl_options_s { unsigned int rcw_2; /* control register 1 */ unsigned int ddr_cdr1; + unsigned int ddr_cdr2; unsigned int trwt_override; unsigned int trwt; /* read-to-write turnaround */ @@ -298,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); +u32 fsl_ddr_get_intl3r(void); /* * The 85xx boards have a common prototype for fixed_sdram so put the diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h index 2c0c9bc2f2..299daca132 100644 --- a/arch/powerpc/include/asm/fsl_fman.h +++ b/arch/powerpc/include/asm/fsl_fman.h @@ -423,6 +423,14 @@ typedef struct fm_10gec_mdio { u8 res[4*1024]; } fm_10gec_mdio_t; +typedef struct fm_memac { + u8 res[4*1024]; +} fm_memac_t; + +typedef struct fm_memac_mdio { + u8 res[4*1024]; +} fm_memac_mdio_t; + typedef struct fm_1588 { u8 res[4*1024]; } fm_1588_t; @@ -446,6 +454,14 @@ typedef struct ccsr_fman { u8 res1[8*1024]; fm_soft_parser_t fm_soft_parser; u8 res2[96*1024]; +#ifdef CONFIG_SYS_FMAN_V3 + struct { + fm_memac_t fm_memac; + fm_memac_mdio_t fm_memac_mdio; + } memac[10]; + u8 res4[32*1024]; + fm_memac_mdio_t fm_dedicated_mdio[2]; +#else struct { fm_dtsec_t fm_dtesc; fm_mdio_t fm_mdio; @@ -455,6 +471,7 @@ typedef struct ccsr_fman { fm_10gec_mdio_t fm_10gec_mdio; } mac_10g[1]; u8 res4[48*1024]; +#endif fm_1588_t fm_1588; u8 res5[4*1024]; } ccsr_fman_t; diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index a9973b80da..d759de975e 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -94,6 +94,11 @@ extern void fdt_fixup_liodn(void *blob); SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) +#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \ + SET_LIODN_ENTRY_1(compat, liodn,\ + offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\ + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) + /* reg nodes for DMA start @ 0x300 */ #define SET_DMA_LIODN(dmaNum, liodn) \ SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\ @@ -118,6 +123,12 @@ extern void fdt_fixup_liodn(void *blob); CONFIG_SYS_FSL_CORENET_PME_OFFSET, \ CONFIG_SYS_FSL_CORENET_PME_OFFSET) +#define SET_PMAN_LIODN(num, liodn) \ + SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \ + offsetof(struct ccsr_pman, ppa1) + \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET) + /* -1 from portID due to how immap has the registers */ #define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \ CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \ @@ -184,11 +195,13 @@ extern void fdt_fixup_liodn(void *blob); extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[]; extern struct liodn_id_table raide_liodn_tbl[]; extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[]; +#ifdef CONFIG_SYS_SRIO extern struct srio_liodn_id_table srio_liodn_tbl[]; +extern int srio_liodn_tbl_sz; +#endif extern struct liodn_id_table rman_liodn_tbl[]; extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz; extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz; -extern int srio_liodn_tbl_sz; extern int rman_liodn_tbl_sz; #endif diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h new file mode 100644 index 0000000000..d6b60e65bc --- /dev/null +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -0,0 +1,271 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MEMAC_H__ +#define __MEMAC_H__ + +#include + +struct memac { + /* memac general control and status registers */ + u32 res_0[2]; + u32 command_config; /* Control and configuration register */ + u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */ + u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */ + u32 maxfrm; /* Maximum frame length register */ + u32 res_18[5]; + u32 hashtable_ctrl; /* Hash table control register */ + u32 res_30[4]; + u32 ievent; /* Interrupt event register */ + u32 tx_ipg_length; /* Transmitter inter-packet-gap register */ + u32 res_48; + u32 imask; /* interrupt mask register */ + u32 res_50; + u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */ + u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */ + u32 rx_pause_status; /* Receive pause status register */ + u32 res_78[2]; + u32 mac_addr[14]; /* MAC address */ + u32 lpwake_timer; /* EEE low power wakeup timer register */ + u32 sleep_timer; /* Transmit EEE Low Power Timer register */ + u32 res_c0[8]; + u32 statn_config; /* Statistics configuration register */ + u32 res_e4[7]; + + /* memac statistics counter registers */ + u32 rx_eoct_l; /* Rx ethernet octests lower */ + u32 rx_eoct_u; /* Rx ethernet octests upper */ + u32 rx_oct_l; /* Rx octests lower */ + u32 rx_oct_u; /* Rx octests upper */ + u32 rx_align_err_l; /* Rx alignment error lower */ + u32 rx_align_err_u; /* Rx alignment error upper */ + u32 rx_pause_frame_l; /* Rx valid pause frame upper */ + u32 rx_pause_frame_u; /* Rx valid pause frame upper */ + u32 rx_frame_l; /* Rx frame counter lower */ + u32 rx_frame_u; /* Rx frame counter upper */ + u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */ + u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */ + u32 rx_vlan_l; /* Rx VLAN frame lower */ + u32 rx_vlan_u; /* Rx VLAN frame upper */ + u32 rx_err_l; /* Rx frame error lower */ + u32 rx_err_u; /* Rx frame error upper */ + u32 rx_uni_l; /* Rx unicast frame lower */ + u32 rx_uni_u; /* Rx unicast frame upper */ + u32 rx_multi_l; /* Rx multicast frame lower */ + u32 rx_multi_u; /* Rx multicast frame upper */ + u32 rx_brd_l; /* Rx broadcast frame lower */ + u32 rx_brd_u; /* Rx broadcast frame upper */ + u32 rx_drop_l; /* Rx dropped packets lower */ + u32 rx_drop_u; /* Rx dropped packets upper */ + u32 rx_pkt_l; /* Rx packets lower */ + u32 rx_pkt_u; /* Rx packets upper */ + u32 rx_undsz_l; /* Rx undersized packet lower */ + u32 rx_undsz_u; /* Rx undersized packet upper */ + u32 rx_64_l; /* Rx 64 oct packet lower */ + u32 rx_64_u; /* Rx 64 oct packet upper */ + u32 rx_127_l; /* Rx 65 to 127 oct packet lower */ + u32 rx_127_u; /* Rx 65 to 127 oct packet upper */ + u32 rx_255_l; /* Rx 128 to 255 oct packet lower */ + u32 rx_255_u; /* Rx 128 to 255 oct packet upper */ + u32 rx_511_l; /* Rx 256 to 511 oct packet lower */ + u32 rx_511_u; /* Rx 256 to 511 oct packet upper */ + u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */ + u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */ + u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */ + u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */ + u32 rx_1519_l; /* Rx 1519 to max oct packet lower */ + u32 rx_1519_u; /* Rx 1519 to max oct packet upper */ + u32 rx_oversz_l; /* Rx oversized packet lower */ + u32 rx_oversz_u; /* Rx oversized packet upper */ + u32 rx_jabber_l; /* Rx Jabber packet lower */ + u32 rx_jabber_u; /* Rx Jabber packet upper */ + u32 rx_frag_l; /* Rx Fragment packet lower */ + u32 rx_frag_u; /* Rx Fragment packet upper */ + u32 rx_cnp_l; /* Rx control packet lower */ + u32 rx_cnp_u; /* Rx control packet upper */ + u32 rx_drntp_l; /* Rx dripped not truncated packet lower */ + u32 rx_drntp_u; /* Rx dripped not truncated packet upper */ + u32 res_1d0[0xc]; + + u32 tx_eoct_l; /* Tx ethernet octests lower */ + u32 tx_eoct_u; /* Tx ethernet octests upper */ + u32 tx_oct_l; /* Tx octests lower */ + u32 tx_oct_u; /* Tx octests upper */ + u32 res_210[0x2]; + u32 tx_pause_frame_l; /* Tx valid pause frame lower */ + u32 tx_pause_frame_u; /* Tx valid pause frame upper */ + u32 tx_frame_l; /* Tx frame counter lower */ + u32 tx_frame_u; /* Tx frame counter upper */ + u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */ + u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */ + u32 tx_vlan_l; /* Tx VLAN frame lower */ + u32 tx_vlan_u; /* Tx VLAN frame upper */ + u32 tx_frame_err_l; /* Tx frame error lower */ + u32 tx_frame_err_u; /* Tx frame error upper */ + u32 tx_uni_l; /* Tx unicast frame lower */ + u32 tx_uni_u; /* Tx unicast frame upper */ + u32 tx_multi_l; /* Tx multicast frame lower */ + u32 tx_multi_u; /* Tx multicast frame upper */ + u32 tx_brd_l; /* Tx broadcast frame lower */ + u32 tx_brd_u; /* Tx broadcast frame upper */ + u32 res_258[0x2]; + u32 tx_pkt_l; /* Tx packets lower */ + u32 tx_pkt_u; /* Tx packets upper */ + u32 tx_undsz_l; /* Tx undersized packet lower */ + u32 tx_undsz_u; /* Tx undersized packet upper */ + u32 tx_64_l; /* Tx 64 oct packet lower */ + u32 tx_64_u; /* Tx 64 oct packet upper */ + u32 tx_127_l; /* Tx 65 to 127 oct packet lower */ + u32 tx_127_u; /* Tx 65 to 127 oct packet upper */ + u32 tx_255_l; /* Tx 128 to 255 oct packet lower */ + u32 tx_255_u; /* Tx 128 to 255 oct packet upper */ + u32 tx_511_l; /* Tx 256 to 511 oct packet lower */ + u32 tx_511_u; /* Tx 256 to 511 oct packet upper */ + u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */ + u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */ + u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */ + u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */ + u32 tx_1519_l; /* Tx 1519 to max oct packet lower */ + u32 tx_1519_u; /* Tx 1519 to max oct packet upper */ + u32 res_2a8[0x6]; + u32 tx_cnp_l; /* Tx control packet lower */ + u32 tx_cnp_u; /* Tx control packet upper */ + u32 res_2c8[0xe]; + + /* Line interface control register */ + u32 if_mode; /* interface mode control */ + u32 if_status; /* interface status */ + u32 res_308[0xe]; + + /* HiGig/2 Register */ + u32 hg_config; /* HiGig2 control and configuration */ + u32 res_344[0x3]; + u32 hg_pause_quanta; /* HiGig2 pause quanta */ + u32 res_354[0x3]; + u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */ + u32 res_364[0x3]; + u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */ + u32 hg_fifos_status; /* HiGig2 fifos status */ + u32 rhm; /* Rx HiGig2 message counter register */ + u32 thm;/* Tx HiGig2 message counter register */ + u32 res_380[0x320]; +}; + +/* COMMAND_CONFIG - command and configuration register */ +#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ +#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ +#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN) + +/* HASHTABLE_CTRL - Hashtable control register */ +#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ +#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff + +/* TX_IPG_LENGTH - Transmit inter-packet gap length register */ +#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff + +/* IMASK - interrupt mask register */ +#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */ +#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */ +#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */ +#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */ +#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */ +#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */ +#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */ +#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */ +#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */ +#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */ +#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */ +#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */ +#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */ +#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */ +#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */ +#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */ + +#define IMASK_MASK_ALL 0x00000000 + +/* IEVENT - interrupt event register */ +#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */ +#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */ +#define IEVENT_REM_FAULT 0x00004000 /* remote fault */ +#define IEVENT_LOC_FAULT 0x00002000 /* local fault */ +#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */ +#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */ +#define IEVENT_TX_ER 0x00000200 /* Tx frame error */ +#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */ +#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */ +#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */ +#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */ +#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */ +#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */ +#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */ +#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */ +#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +/* IF_MODE - Interface Mode Register */ +#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */ +#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */ +#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */ +#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */ +#define IF_MODE_RG 0x00000004 /* 1- RGMII */ +#define IF_MODE_RM 0x00000008 /* 1- RGMII */ + +#define IF_DEFAULT (IF_GMII) + +/* Internal PHY Registers - SGMII */ +#define PHY_SGMII_CR_PHY_RESET 0x8000 +#define PHY_SGMII_CR_RESET_AN 0x0200 +#define PHY_SGMII_CR_DEF_VAL 0x1140 +#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001 +#define PHY_SGMII_IF_MODE_AN 0x0002 +#define PHY_SGMII_IF_MODE_SGMII 0x0001 + +struct memac_mdio_controller { + u32 res0[0xc]; + u32 mdio_stat; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_STAT_PRE (1 << 5) +#define MDIO_STAT_ENC (1 << 6) +#define MDIO_STAT_HOLD_15_CLK (7 << 2) + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +struct fsl_enet_mac; + +void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs, + int max_rx_len); + +#endif diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index 5644044eb8..b75f5b975a 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -32,15 +32,16 @@ enum fsl_dpaa_dev { FSL_HW_PORTAL_FMAN2, #endif #endif -#ifdef CONFIG_SYS_DPAA_PME FSL_HW_PORTAL_PME, -#endif #ifdef CONFIG_SYS_FSL_RAID_ENGINE FSL_HW_PORTAL_RAID_ENGINE, #endif #ifdef CONFIG_SYS_DPAA_RMAN FSL_HW_PORTAL_RMAN, #endif +#ifdef CONFIG_SYS_DPAA_DCE + FSL_HW_PORTAL_DCE, +#endif }; diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 22525f1156..6cd7379c8f 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -37,11 +37,17 @@ enum srds_prtcl { SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, + SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC10, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM2_DTSEC5, + SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC10, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3, @@ -49,13 +55,49 @@ enum srds_prtcl { XAUI_FM1, XAUI_FM2, AURORA, + CPRI1, + CPRI2, + CPRI3, + CPRI4, + CPRI5, + CPRI6, + CPRI7, + CPRI8, + XAUI_FM1_MAC9, + XAUI_FM1_MAC10, + XAUI_FM2_MAC9, + XAUI_FM2_MAC10, + HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, + HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, + QSGMII_FM1_A, /* A indicates MACs 1-4 */ + QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ + QSGMII_FM2_A, + QSGMII_FM2_B, + XFI_FM1_MAC9, + XFI_FM1_MAC10, + XFI_FM2_MAC9, + XFI_FM2_MAC10, + INTERLAKEN, +}; + +enum srds { + FSL_SRDS_1 = 0, + FSL_SRDS_2 = 1, + FSL_SRDS_3 = 2, + FSL_SRDS_4 = 3, }; int is_serdes_configured(enum srds_prtcl device); void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +#else int serdes_get_first_lane(enum srds_prtcl device); +#endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 void serdes_reset_rx(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 5a5877fc2c..cb3a80bb2b 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -38,7 +38,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; #if defined(CONFIG_8xx) @@ -63,6 +63,8 @@ typedef struct global_data { u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; +#elif defined(CONFIG_MPC8309) + u32 usbdr_clk; #endif #if defined (CONFIG_MPC834x) u32 usbmph_clk; diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 2ba502ad11..679832cd6c 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -73,12 +73,19 @@ typedef struct sysconf83xx { u32 obir; /* Output Buffer Impedance Register */ u8 res8[0xC]; u32 pecr1; /* PCI Express control register 1 */ -#ifdef CONFIG_MPC8308 - u32 sdhccr; /* eSDHC Control Registers for MPC8308 */ +#if defined(CONFIG_MPC830x) + u32 sdhccr; /* eSDHC Control Registers for MPC830x */ #else u32 pecr2; /* PCI Express control register 2 */ #endif +#if defined(CONFIG_MPC8309) + u32 can_dbg_ctrl; + u32 res9a; + u32 gpr1; + u8 res9b[0xAC]; +#else u8 res9[0xB8]; +#endif } sysconf83xx_t; /* @@ -708,7 +715,11 @@ typedef struct serdes83xx { * On Chip ROM */ typedef struct rom83xx { +#if defined(CONFIG_MPC8309) + u8 mem[0x8000]; +#else u8 mem[0x10000]; +#endif } rom83xx_t; /* @@ -972,6 +983,56 @@ typedef struct immap { u8 res8[0xC0000]; u8 qe[0x100000]; /* QE block */ } immap_t; +#elif defined(CONFIG_MPC8309) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[2]; /* General purpose I/O module */ + u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */ + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ + qepio83xx_t qepio; /* QE Parallel I/O ports */ + u8 res1[0x800]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res2[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res3[0x200]; + duart83xx_t duart1[2]; /* DUART */ + u8 res4[0x500]; + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ + u8 res5[0x1000]; + u8 spi[0x100]; + u8 res6[0xf00]; + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */ + u8 res7[0x80]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */ + u8 res8[0x13A00]; + u8 can1[0x1000]; /* Flexcan 1 */ + u8 can2[0x1000]; /* Flexcan 2 */ + u8 res9[0x5000]; + usb83xx_t usb; + u8 res10[0x5000]; + u8 can3[0x1000]; /* Flexcan 3 */ + u8 can4[0x1000]; /* Flexcan 4 */ + u8 res11[0x1000]; + u8 dma1[0x2000]; /* DMA */ + sdhc83xx_t sdhc; /* SDHC Controller */ + u8 res12[0xC1000]; + rom83xx_t rom; /* On Chip ROM */ + u8 res13[0x8000]; + u8 qe[0x100000]; /* QE block */ + u8 res14[0xE00000];/* Added for 8309 */ +} immap_t; #endif #define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 7de33a7dde..969f726c36 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -296,7 +296,9 @@ typedef struct ccsr_pcix { u32 cfg_addr; /* PCIX Configuration Addr */ u32 cfg_data; /* PCIX Configuration Data */ u32 int_ack; /* PCIX IRQ Acknowledge */ - u8 res1[3060]; + u8 res000c[52]; + u32 liodn_base; /* PCIX LIODN base register */ + u8 res0044[3004]; u32 potar0; /* PCIX Outbound Transaction Addr 0 */ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */ @@ -1687,6 +1689,77 @@ typedef struct ccsr_gur { u32 alt_pmuxcr; /* Alt function signal multiplex control */ u8 res6[12]; u32 devdisr; /* Device disable control */ + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 devdisr5; /* Device disable control 5 */ +#define FSL_CORENET_DEVDISR_PBL 0x80000000 +#define FSL_CORENET_DEVDISR_PMAN 0x40000000 +#define FSL_CORENET_DEVDISR_ESDHC 0x20000000 +#define FSL_CORENET_DEVDISR_DMA1 0x00800000 +#define FSL_CORENET_DEVDISR_DMA2 0x00400000 +#define FSL_CORENET_DEVDISR_USB1 0x00080000 +#define FSL_CORENET_DEVDISR_USB2 0x00040000 +#define FSL_CORENET_DEVDISR_SATA1 0x00008000 +#define FSL_CORENET_DEVDISR_SATA2 0x00004000 +#define FSL_CORENET_DEVDISR_PME 0x00000800 +#define FSL_CORENET_DEVDISR_SEC 0x00000200 +#define FSL_CORENET_DEVDISR_RMU 0x00000080 +#define FSL_CORENET_DEVDISR_DCE 0x00000040 +#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000 +#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000 +#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000 +#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000 +#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000 +#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000 +#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000 +#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000 +#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000 +#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800 +#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400 +#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800 +#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400 +#define FSL_CORENET_DEVDISR2_FM1 0x00000080 +#define FSL_CORENET_DEVDISR2_FM2 0x00000040 +#define FSL_CORENET_DEVDISR2_CPRI 0x00000008 +#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000 +#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000 +#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000 +#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000 +#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000 +#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000 +#define FSL_CORENET_DEVDISR3_QMAN 0x00080000 +#define FSL_CORENET_DEVDISR3_BMAN 0x00040000 +#define FSL_CORENET_DEVDISR3_LA1 0x00008000 +#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800 +#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400 +#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200 +#define FSL_CORENET_DEVDISR4_I2C1 0x80000000 +#define FSL_CORENET_DEVDISR4_I2C2 0x40000000 +#define FSL_CORENET_DEVDISR4_DUART1 0x20000000 +#define FSL_CORENET_DEVDISR4_DUART2 0x10000000 +#define FSL_CORENET_DEVDISR4_ESPI 0x08000000 +#define FSL_CORENET_DEVDISR5_DDR1 0x80000000 +#define FSL_CORENET_DEVDISR5_DDR2 0x40000000 +#define FSL_CORENET_DEVDISR5_DDR3 0x20000000 +#define FSL_CORENET_DEVDISR5_CPC1 0x08000000 +#define FSL_CORENET_DEVDISR5_CPC2 0x04000000 +#define FSL_CORENET_DEVDISR5_CPC3 0x02000000 +#define FSL_CORENET_DEVDISR5_IFC 0x00800000 +#define FSL_CORENET_DEVDISR5_GPIO 0x00400000 +#define FSL_CORENET_DEVDISR5_DBG 0x00200000 +#define FSL_CORENET_DEVDISR5_NAL 0x00100000 +#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000 +#define FSL_CORENET_NUM_DEVDISR 5 +#else #define FSL_CORENET_DEVDISR_PCIE1 0x80000000 #define FSL_CORENET_DEVDISR_PCIE2 0x40000000 #define FSL_CORENET_DEVDISR_PCIE3 0x20000000 @@ -1712,7 +1785,6 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_I2C2 0x00000010 #define FSL_CORENET_DEVDISR_DUART1 0x00000002 #define FSL_CORENET_DEVDISR_DUART2 0x00000001 - u32 devdisr2; /* Device disable control 2 */ #define FSL_CORENET_DEVDISR2_PME 0x80000000 #define FSL_CORENET_DEVDISR2_SEC 0x40000000 #define FSL_CORENET_DEVDISR2_QMBM 0x08000000 @@ -1731,8 +1803,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000 #define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800 #define FSL_CORENET_NUM_DEVDISR 2 - u8 res7[8]; u32 powmgtcsr; /* Power management status & control */ +#endif u8 res8[12]; u32 coredisru; /* uppper portion for support of 64 cores */ u32 coredisrl; /* lower portion for support of 64 cores */ @@ -1755,13 +1827,47 @@ typedef struct ccsr_gur { u32 brrl; /* Boot release */ u8 res17[24]; u32 rcwsr[16]; /* Reset control word status */ + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3 +#elif defined(CONFIG_PPC_B4860) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#endif +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000 + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f #define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 #define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 #define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000 +#define FSL_CORENET_RCWSR5_SRDS2_EN 0x00001000 #define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */ #define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */ +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 @@ -1783,6 +1889,24 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_RGMII 0x00000000 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000 +#endif +#if defined(CONFIG_PPC_P5040) +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000 +#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */ +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 +#endif +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 #endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ @@ -1880,34 +2004,38 @@ typedef struct ccsr_gur { #define rmuliodnr rio1maintliodnr typedef struct ccsr_clk { - u32 clkc0csr; /* Core 0 Clock control/status */ + u32 clkc0csr; /* 0x000 Core 0 Clock control/status */ u8 res1[0x1c]; - u32 clkc1csr; /* Core 1 Clock control/status */ + u32 clkc1csr; /* 0x020 Core 1 Clock control/status */ u8 res2[0x1c]; - u32 clkc2csr; /* Core 2 Clock control/status */ + u32 clkc2csr; /* 0x040 Core 2 Clock control/status */ u8 res3[0x1c]; - u32 clkc3csr; /* Core 3 Clock control/status */ + u32 clkc3csr; /* 0x060 Core 3 Clock control/status */ u8 res4[0x1c]; - u32 clkc4csr; /* Core 4 Clock control/status */ + u32 clkc4csr; /* 0x080 Core 4 Clock control/status */ u8 res5[0x1c]; - u32 clkc5csr; /* Core 5 Clock control/status */ + u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */ u8 res6[0x1c]; - u32 clkc6csr; /* Core 6 Clock control/status */ + u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */ u8 res7[0x1c]; - u32 clkc7csr; /* Core 7 Clock control/status */ + u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */ u8 res8[0x71c]; - u32 pllc1gsr; /* Cluster PLL 1 General Status */ + u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */ u8 res10[0x1c]; - u32 pllc2gsr; /* Cluster PLL 2 General Status */ + u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */ u8 res11[0x1c]; - u32 pllc3gsr; /* Cluster PLL 3 General Status */ + u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */ u8 res12[0x1c]; - u32 pllc4gsr; /* Cluster PLL 4 General Status */ - u8 res13[0x39c]; - u32 pllpgsr; /* Platform PLL General Status */ + u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */ + u8 res13[0x1c]; + u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */ u8 res14[0x1c]; - u32 plldgsr; /* DDR PLL General Status */ - u8 res15[0x3dc]; + u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */ + u8 res15[0x35c]; + u32 pllpgsr; /* 0xc00 Platform PLL General Status */ + u8 res16[0x1c]; + u32 plldgsr; /* 0xc20 DDR PLL General Status */ + u8 res17[0x3dc]; } ccsr_clk_t; #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 @@ -2384,6 +2512,78 @@ typedef struct ccsr_gur { #define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define MAX_SERDES 4 +#define SRDS_MAX_LANES 8 +#define SRDS_MAX_BANK 2 +typedef struct serdes_corenet { + struct { + u32 rstctl; /* Reset Control Register */ +#define SRDS_RSTCTL_RST 0x80000000 +#define SRDS_RSTCTL_RSTDONE 0x40000000 +#define SRDS_RSTCTL_RSTERR 0x20000000 +#define SRDS_RSTCTL_SWRST 0x10000000 +#define SRDS_RSTCTL_SDPD 0x00000020 + u32 pllcr0; /* PLL Control Register 0 */ +#define SRDS_PLLCR0_POFF 0x80000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 +#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 +#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 +#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 +#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 + u32 pllcr1; /* PLL Control Register 1 */ +#define SRDS_PLLCR1_PLL_BWSEL 0x08000000 + u32 res_0c; /* 0x00c */ + u32 pllcr3; + u32 pllcr4; + u8 res_18[0x20-0x18]; + } bank[2]; + u8 res_40[0x90-0x40]; + u32 srdstcalcr; /* 0x90 TX Calibration Control */ + u8 res_94[0xa0-0x94]; + u32 srdsrcalcr; /* 0xa0 RX Calibration Control */ + u8 res_a4[0xb0-0xa4]; + u32 srdsgr0; /* 0xb0 General Register 0 */ + u8 res_b4[0xe0-0xb4]; + u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */ + u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */ + u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */ + u32 srdspccr3; /* 0xec Protocol Converter Config 3 */ + u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */ + u8 res_f4[0x100-0xf4]; + struct { + u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */ + u8 res_104[0x120-0x104]; + } srdslnpssr[8]; + u8 res_200[0x800-0x200]; + struct { + u32 gcr0; /* 0x800 General Control Register 0 */ + u32 gcr1; /* 0x804 General Control Register 1 */ + u32 gcr2; /* 0x808 General Control Register 2 */ + u32 res_80c; + u32 recr0; /* 0x810 Receive Equalization Control */ + u32 res_814; + u32 tecr0; /* 0x818 Transmit Equalization Control */ + u32 res_81c; + u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */ + u8 res_824[0x840-0x824]; + } lane[8]; /* Lane A, B, C, D, E, F, G, H */ + u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */ +} serdes_corenet_t; + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#define SRDS_MAX_LANES 18 +#define SRDS_MAX_BANK 3 typedef struct serdes_corenet { struct { u32 rstctl; /* Reset Control Register */ @@ -2392,11 +2592,13 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SDPD 0x00000020 u32 pllcr0; /* PLL Control Register 0 */ -#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_PVCOCNT_EN 0x02000000 #define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 #define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 #define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 #define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 #define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 @@ -2421,6 +2623,7 @@ typedef struct serdes_corenet { u32 gcr0; /* General Control Register 0 */ #define SRDS_GCR0_RRST 0x00400000 #define SRDS_GCR0_1STLANE 0x00010000 +#define SRDS_GCR0_UOTHL 0x00100000 u32 gcr1; /* General Control Register 1 */ #define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000 #define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000 @@ -2440,6 +2643,7 @@ typedef struct serdes_corenet { } lane[24]; u32 res6[384]; } serdes_corenet_t; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ enum { FSL_SRDS_B1_LANE_A = 0, @@ -2482,8 +2686,8 @@ typedef struct ccsr_sec { struct { u32 ms; /* DECO LIODN Register, MS */ u32 ls; /* DECO LIODN Register, LS */ - } decoliodnr[5]; - u8 res4[0x58]; + } decoliodnr[8]; + u8 res4[0x40]; u32 dar; /* DECO Avail Register */ u32 drr; /* DECO Reset Register */ u8 res5[0xe78]; @@ -2523,13 +2727,16 @@ typedef struct ccsr_sec { #endif typedef struct ccsr_qman { +#ifdef CONFIG_SYS_FSL_QMAN_V3 + u8 res0[0x200]; +#else struct { u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ u32 res; u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */ } qcsp[32]; - +#endif /* Not actually reserved, but irrelevant to u-boot */ u8 res[0xbf8 - 0x200]; u32 ip_rev_1; @@ -2554,6 +2761,14 @@ typedef struct ccsr_qman { u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ u8 res7[0x2e8]; +#ifdef CONFIG_SYS_FSL_QMAN_V3 + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/ + } qcsp[50]; +#endif } ccsr_qman_t; typedef struct ccsr_bman { @@ -2617,14 +2832,48 @@ struct ccsr_rman { }; #endif +#ifdef CONFIG_SYS_PMAN +struct ccsr_pman { + u8 res_00[0x40]; + u32 poes1; /* PMAN Operation Error Status Register 1 */ + u32 poes2; /* PMAN Operation Error Status Register 2 */ + u32 poeah; /* PMAN Operation Error Address High */ + u32 poeal; /* PMAN Operation Error Address Low */ + u8 res_50[0x50]; + u32 pr1; /* PMAN Revision Register 1 */ + u32 pr2; /* PMAN Revision Register 2 */ + u8 res_a8[0x8]; + u32 pcap; /* PMAN Capabilities Register */ + u8 res_b4[0xc]; + u32 pc1; /* PMAN Control Register 1 */ + u32 pc2; /* PMAN Control Register 2 */ + u32 pc3; /* PMAN Control Register 3 */ + u32 pc4; /* PMAN Control Register 4 */ + u32 pc5; /* PMAN Control Register 5 */ + u32 pc6; /* PMAN Control Register 6 */ + u8 res_d8[0x8]; + u32 ppa1; /* PMAN Prefetch Attributes Register 1 */ + u32 ppa2; /* PMAN Prefetch Attributes Register 2 */ + u8 res_e8[0x8]; + u32 pics; /* PMAN Interrupt Control and Status */ + u8 res_f4[0xf0c]; +}; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 +#ifdef CONFIG_SYS_PMAN +#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000 +#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000 +#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000 +#endif #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 +#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 @@ -2635,10 +2884,17 @@ struct ccsr_rman { #define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000 +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000 +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000 +#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000 +#else #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000 #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000 #define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000 +#endif #define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 #define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET @@ -2657,7 +2913,9 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000 #define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000 #define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000 +#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000 #define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000 +#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000 #define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000 #define CONFIG_SYS_FSL_FM2_OFFSET 0x500000 #define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000 @@ -2665,7 +2923,10 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000 #define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000 #define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000 +#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000 #define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000 +#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000 +#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000 #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 @@ -2775,6 +3036,8 @@ struct ccsr_rman { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) +#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) #define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \ @@ -2808,4 +3071,62 @@ struct ccsr_rman { #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +struct ccsr_cluster_l2 { + u32 l2csr0; /* 0x000 L2 cache control and status register 0 */ + u32 l2csr1; /* 0x004 L2 cache control and status register 1 */ + u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */ + u8 res_0c[500];/* 0x00c - 0x1ff */ + u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */ + u8 res_204[4]; + u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */ + u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */ + u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */ + u8 res_214[4]; + u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */ + u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */ + u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */ + u8 res_224[4]; + u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */ + u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */ + u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */ + u8 res_234[4]; + u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */ + u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */ + u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */ + u8 res244[4]; + u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */ + u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */ + u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */ + u8 res_254[4]; + u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */ + u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */ + u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */ + u8 res_264[4]; + u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */ + u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */ + u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */ + u8 res274[4]; + u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */ + u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */ + u8 res_280[0xb80]; /* 0x280 - 0xdff */ + u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */ + u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */ + u32 l2errinjctl;/* 0xe08 L2 cache error injection control */ + u8 res_e0c[20]; /* 0xe0c - 0x01f */ + u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */ + u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */ + u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */ + u8 res_e2c[20]; /* 0xe2c - 0xe3f */ + u32 l2errdet; /* 0xe40 L2 cache error detect */ + u32 l2errdis; /* 0xe44 L2 cache error disable */ + u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */ + u32 l2errattr; /* 0xe4c L2 cache error attribute */ + u32 l2erreaddr; /* 0xe50 L2 cache error extended address */ + u32 l2erraddr; /* 0xe54 L2 cache error address */ + u32 l2errctl; /* 0xe58 L2 cache error control */ +}; +#define CONFIG_SYS_FSL_CLUSTER_1_L2 \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET) +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #endif /*__IMMAP_85xx__*/ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 9be9dca1f7..f0b989a3b0 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -20,7 +20,7 @@ #define QE_MURAM_SIZE 0xc000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309) #define QE_MURAM_SIZE 0x4000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h index fe490bac05..9188ede3f5 100644 --- a/arch/powerpc/include/asm/mp.h +++ b/arch/powerpc/include/asm/mp.h @@ -25,7 +25,7 @@ void setup_mp(void); void cpu_mp_lmb_reserve(struct lmb *lmb); -u32 determine_mp_bootpg(void); +u32 determine_mp_bootpg(unsigned int *pagesize); int is_core_disabled(int nr); #ifdef CONFIG_E6500 diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h index 5a608a5d0f..2aed5148ef 100644 --- a/arch/powerpc/include/asm/mpc85xx_gpio.h +++ b/arch/powerpc/include/asm/mpc85xx_gpio.h @@ -98,7 +98,10 @@ static inline int gpio_direction_input(unsigned gpio) static inline int gpio_direction_output(unsigned gpio, int value) { - mpc85xx_gpio_set_low(1U << gpio); + if (value) + mpc85xx_gpio_set_high(1U << gpio); + else + mpc85xx_gpio_set_low(1U << gpio); return 0; } diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 36695e2fb6..7aa3231ad4 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1095,6 +1095,17 @@ #define SVR_P4080 0x820000 #define SVR_P5010 0x822100 #define SVR_P5020 0x822000 +#define SVR_P5021 0X820500 +#define SVR_P5040 0x820400 +#define SVR_T4240 0x824000 +#define SVR_T4120 0x824001 +#define SVR_B4860 0X868000 +#define SVR_G4860 0x868001 +#define SVR_G4060 0x868003 +#define SVR_B4440 0x868100 +#define SVR_G4440 0x868101 +#define SVR_B4420 0x868102 +#define SVR_B4220 0x868103 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index b2fa2b574b..7229a98eaa 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -81,7 +81,7 @@ typedef struct bd_info { unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405CR) || \ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 965f9ea4a5..808021c42e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -50,6 +50,7 @@ COBJS-y += cache.o COBJS-y += extable.o COBJS-y += interrupts.o COBJS-$(CONFIG_CMD_KGDB) += kgdb.o +COBJS-${CONFIG_CMD_IDE} += ide.o COBJS-y += time.o # Workaround for local bus unaligned access problems diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index b860141efd..ebf400851a 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -440,8 +440,8 @@ void board_init_f(ulong bootflag) * We need to make sure the location we intend to put secondary core * boot code is reserved and not used by any part of u-boot */ - if (addr > determine_mp_bootpg()) { - addr = determine_mp_bootpg(); + if (addr > determine_mp_bootpg(NULL)) { + addr = determine_mp_bootpg(NULL); debug("Reserving MP boot page to %08lx\n", addr); } #endif diff --git a/arch/powerpc/lib/ide.c b/arch/powerpc/lib/ide.c new file mode 100644 index 0000000000..139a94a5c1 --- /dev/null +++ b/arch/powerpc/lib/ide.c @@ -0,0 +1,201 @@ +/* + * (C) Copyright 2000-2011 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* Code taken from cmd_ide.c */ +#include +#include +#include "ide.h" + +#ifdef CONFIG_IDE_8xx_DIRECT +#include +#include +DECLARE_GLOBAL_DATA_PTR; + +/* Timings for IDE Interface + * + * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk + * 70 165 30 PIO-Mode 0, [ns] + * 4 9 2 [Cycles] + * 50 125 20 PIO-Mode 1, [ns] + * 3 7 2 [Cycles] + * 30 100 15 PIO-Mode 2, [ns] + * 2 6 1 [Cycles] + * 30 80 10 PIO-Mode 3, [ns] + * 2 5 1 [Cycles] + * 25 70 10 PIO-Mode 4, [ns] + * 2 4 1 [Cycles] + */ + +static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = { + /* Setup Length Hold */ + { 70, 165, 30 }, /* PIO-Mode 0, [ns] */ + { 50, 125, 20 }, /* PIO-Mode 1, [ns] */ + { 30, 101, 15 }, /* PIO-Mode 2, [ns] */ + { 30, 80, 10 }, /* PIO-Mode 3, [ns] */ + { 25, 70, 10 }, /* PIO-Mode 4, [ns] */ +}; + +static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1]; + +#ifndef CONFIG_SYS_PIO_MODE +#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */ +#endif +static int pio_mode = CONFIG_SYS_PIO_MODE; + +/* Make clock cycles and always round up */ + +#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U) + +static void set_pcmcia_timing(int pmode) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); + ulong timings; + + debug("Set timing for PIO Mode %d\n", pmode); + + timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold) + | PCMCIA_SST(pio_config_clk[pmode].t_setup) + | PCMCIA_SL(pio_config_clk[pmode].t_length); + + /* + * IDE 0 + */ + pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0; +#if (CONFIG_SYS_PCMCIA_POR0 != 0) + pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings; +#else + pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0; +#endif + debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0); + + pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1; +#if (CONFIG_SYS_PCMCIA_POR1 != 0) + pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings; +#else + pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1; +#endif + debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1); + + pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2; +#if (CONFIG_SYS_PCMCIA_POR2 != 0) + pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings; +#else + pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2; +#endif + debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2); + + pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3; +#if (CONFIG_SYS_PCMCIA_POR3 != 0) + pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings; +#else + pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3; +#endif + debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3); + + /* + * IDE 1 + */ + pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4; +#if (CONFIG_SYS_PCMCIA_POR4 != 0) + pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings; +#else + pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4; +#endif + debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4); + + pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5; +#if (CONFIG_SYS_PCMCIA_POR5 != 0) + pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings; +#else + pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5; +#endif + debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5); + + pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6; +#if (CONFIG_SYS_PCMCIA_POR6 != 0) + pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings; +#else + pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6; +#endif + debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6); + + pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7; +#if (CONFIG_SYS_PCMCIA_POR7 != 0) + pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings; +#else + pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7; +#endif + debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7); + +} + +int ide_preinit(void) +{ + int i; + /* Initialize PIO timing tables */ + for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) { + pio_config_clk[i].t_setup = + PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk); + pio_config_clk[i].t_length = + PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk); + pio_config_clk[i].t_hold = + PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk); + debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk" + " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup, + pio_config_clk[i].t_setup, pio_config_ns[i].t_length, + pio_config_clk[i].t_length, pio_config_ns[i].t_hold, + pio_config_clk[i].t_hold); + } + + return 0; +} + +int ide_init_postreset(void) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); + + /* PCMCIA / IDE initialization for common mem space */ + pcmp->pcmc_pgcrb = 0; + + /* start in PIO mode 0 - most relaxed timings */ + pio_mode = 0; + set_pcmcia_timing(pio_mode); + return 0; +} +#endif /* CONFIG_IDE_8xx_DIRECT */ + +#ifdef CONFIG_IDE_8xx_PCCARD +int ide_preinit(void) +{ + ide_devices_found = 0; + /* initialize the PCMCIA IDE adapter card */ + pcmcia_on(); + if (!ide_devices_found) + return 1; + udelay(1000000);/* 1 s */ + return 0; +} +#endif diff --git a/arch/powerpc/lib/ide.h b/arch/powerpc/lib/ide.h new file mode 100644 index 0000000000..9e80702916 --- /dev/null +++ b/arch/powerpc/lib/ide.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2012 + * Pavel Herrmann + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MPC8XX_IDE_H_ +#define _MPC8XX_IDE_H_ 1 + +#ifdef CONFIG_IDE_8xx_PCCARD +int pcmcia_on(void); +extern int ide_devices_found; +#endif +#endif diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds index 99601387cb..1b781ebf6a 100644 --- a/arch/sandbox/cpu/u-boot.lds +++ b/arch/sandbox/cpu/u-boot.lds @@ -24,9 +24,11 @@ SECTIONS { - __u_boot_cmd_start = .; - _u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __u_boot_sandbox_option_start = .; _u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) } diff --git a/arch/sandbox/include/asm/global_data.h b/arch/sandbox/include/asm/global_data.h index 581fd2f2a0..78a751d96f 100644 --- a/arch/sandbox/include/asm/global_data.h +++ b/arch/sandbox/include/asm/global_data.h @@ -36,7 +36,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds index b86a82297f..17f8091ea4 100644 --- a/arch/sh/cpu/sh2/u-boot.lds +++ b/arch/sh/cpu/sh2/u-boot.lds @@ -72,13 +72,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds index 9bf8503640..c8319610c2 100644 --- a/arch/sh/cpu/sh3/u-boot.lds +++ b/arch/sh/cpu/sh3/u-boot.lds @@ -78,13 +78,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds index d9c70bce09..0ecafcf5d9 100644 --- a/arch/sh/cpu/sh4/u-boot.lds +++ b/arch/sh/cpu/sh4/u-boot.lds @@ -75,13 +75,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/arch/sh/include/asm/global_data.h b/arch/sh/include/asm/global_data.h index 6e534ad614..9a2c19376d 100644 --- a/arch/sh/include/asm/global_data.h +++ b/arch/sh/include/asm/global_data.h @@ -31,7 +31,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/sh/include/asm/u-boot.h b/arch/sh/include/asm/u-boot.h index 6c04daf3bc..2c9c4634d8 100644 --- a/arch/sh/include/asm/u-boot.h +++ b/arch/sh/include/asm/u-boot.h @@ -33,7 +33,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ unsigned long bi_boot_params; /* where this board expects params */ } bd_t; diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c index 16fffb621d..40d5b01d27 100644 --- a/arch/sparc/cpu/leon2/serial.c +++ b/arch/sparc/cpu/leon2/serial.c @@ -105,13 +105,6 @@ static void leon2_serial_putc(const char c) leon2_serial_putc_raw(c); } -static void leon2_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int leon2_serial_getc(void) { LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; @@ -172,7 +165,7 @@ static struct serial_device leon2_serial_drv = { .stop = NULL, .setbrg = leon2_serial_setbrg, .putc = leon2_serial_putc, - .puts = leon2_serial_puts, + .puts = default_serial_puts, .getc = leon2_serial_getc, .tstc = leon2_serial_tstc, }; diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index c4f3ee83c3..838d4514ee 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -99,13 +99,6 @@ static void leon3_serial_putc(const char c) leon3_serial_putc_raw(c); } -static void leon3_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int leon3_serial_getc(void) { if (!leon3_apbuart) @@ -146,7 +139,7 @@ static struct serial_device leon3_serial_drv = { .stop = NULL, .setbrg = leon3_serial_setbrg, .putc = leon3_serial_putc, - .puts = leon3_serial_puts, + .puts = default_serial_puts, .getc = leon3_serial_getc, .tstc = leon3_serial_tstc, }; diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h index 93d3cc02eb..aa63b35cab 100644 --- a/arch/sparc/include/asm/global_data.h +++ b/arch/sparc/include/asm/global_data.h @@ -40,7 +40,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h index 8d011185a0..04c05d4ffe 100644 --- a/arch/sparc/include/asm/u-boot.h +++ b/arch/sparc/include/asm/u-boot.h @@ -54,7 +54,7 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index ff0e0f2fd0..32d025a342 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -246,8 +246,8 @@ void board_init_f(ulong bootflag) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP) diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index fe28030d84..a1ecefafc6 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -33,10 +33,11 @@ SECTIONS .text : { *(.text*); } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h index 6d29c0b9a3..bce999f41c 100644 --- a/arch/x86/include/asm/global_data.h +++ b/arch/x86/include/asm/global_data.h @@ -38,7 +38,7 @@ typedef struct global_data { unsigned long gd_addr; /* Location of Global Data */ bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds index 4ba1964f7e..0c92d31f61 100644 --- a/board/BuS/eb_cpu5282/u-boot.lds +++ b/board/BuS/eb_cpu5282/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index 5aaf6b309d..2bb876d689 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -86,9 +86,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 1327c62a75..4a780c3746 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -139,20 +139,13 @@ static void marvell_serial_setbrg(void) #endif /* CONFIG_MPSC */ -static void marvell_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device marvell_serial_drv = { .name = "marvell_serial", .start = marvell_serial_init, .stop = NULL, .setbrg = marvell_serial_setbrg, .putc = marvell_serial_putc, - .puts = marvell_serial_puts, + .puts = default_serial_puts, .getc = marvell_serial_getc, .tstc = marvell_serial_tstc, }; diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXClassic/u-boot.lds +++ b/board/RPXClassic/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/RPXClassic/u-boot.lds.debug +++ b/board/RPXClassic/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXlite/u-boot.lds +++ b/board/RPXlite/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/RPXlite/u-boot.lds.debug +++ b/board/RPXlite/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXlite_dw/u-boot.lds +++ b/board/RPXlite_dw/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/RPXlite_dw/u-boot.lds.debug +++ b/board/RPXlite_dw/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds index 838537375b..748e5113ef 100644 --- a/board/RRvision/u-boot.lds +++ b/board/RRvision/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index 63fd356097..c41eed0e6f 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 9885d06b8e..84099840b5 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index 4a1c75aecc..a3bd02b0d2 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds index a7627699e7..73e2f3f9cf 100644 --- a/board/adder/u-boot.lds +++ b/board/adder/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index 52c986e8a9..656b2fbf89 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,6 +48,10 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + #include + } >.sram + . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds index 88ced629ec..289386b35c 100644 --- a/board/altera/nios2-generic/u-boot.lds +++ b/board/altera/nios2-generic/u-boot.lds @@ -46,13 +46,11 @@ SECTIONS * the initialization code relocates the command table as * well -- admittedly, this is just pure laziness ;-) */ - __u_boot_cmd_start = .; - .u_boot_cmd : - { - *(.u_boot_cmd) - } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } /* INIT DATA sections - "Small" data (see the gcc -G option) * is always gp-relative. Here we make all init data sections diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds index ab67de2f76..beba978f83 100644 --- a/board/amcc/acadia/u-boot-nand.lds +++ b/board/amcc/acadia/u-boot-nand.lds @@ -72,10 +72,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds index 3ad87095a1..2dd00d7f42 100644 --- a/board/amcc/bamboo/u-boot-nand.lds +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds index 76f89f188d..8ac5116296 100644 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ b/board/amcc/canyonlands/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds index ab67de2f76..beba978f83 100644 --- a/board/amcc/kilauea/u-boot-nand.lds +++ b/board/amcc/kilauea/u-boot-nand.lds @@ -72,10 +72,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index 07ae8b1291..18266efd09 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds index 423400ac66..6b02784926 100644 --- a/board/amcc/sequoia/u-boot-ram.lds +++ b/board/amcc/sequoia/u-boot-ram.lds @@ -64,10 +64,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds index a1d8e0f6dc..bc40fd649d 100644 --- a/board/astro/mcf5373l/u-boot.lds +++ b/board/astro/mcf5373l/u-boot.lds @@ -22,51 +22,18 @@ */ OUTPUT_ARCH(m68k) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ + SECTIONS { /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/m68k/cpu/mcf532x/start.o (.text) - arch/m68k/lib/traps.o (.text) - arch/m68k/lib/interrupts.o (.text) - common/dlmalloc.o (.text) - lib/zlib.o (.text) + arch/m68k/cpu/mcf532x/start.o (.text*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text*) - *(.text) -/* *(.fixup)*/ - *(.got1) + *(.text*) } _etext = .; PROVIDE (etext = .); @@ -74,9 +41,6 @@ SECTIONS { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } /* Read-write section, merged into data segment: */ . = (. + 0x00FF) & 0xFFFFFF00; @@ -86,33 +50,30 @@ SECTIONS .reloc : { __got_start = .; - *(.got) + KEEP(*(.got)) __got_end = .; _GOT2_TABLE_ = .; - *(.got2) + KEEP(*(.got2)) _FIXUP_TABLE_ = .; - *(.fixup) + KEEP(*(.fixup)) } __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS + *(.data*) + *(.sdata*) } _edata = .; PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; @@ -130,9 +91,8 @@ SECTIONS .bss : { _sbss = .; - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) + *(.sbss*) + *(.bss*) *(COMMON) . = ALIGN(4); _ebss = .; diff --git a/board/bmw/README b/board/bmw/README deleted file mode 100644 index 1fbef79e64..0000000000 --- a/board/bmw/README +++ /dev/null @@ -1,331 +0,0 @@ -Broadcom 95xx BMW CPCI Platform - -Overview -========= -BMW is an MPC8245 system controller featuring: -* 3U CPCI Form Factor -* BCM5703 Gigabit Ethernet -* M48T59Y NVRAM -* 16MB DOC -* DIP Socket for Socketed DOC up to 1GB -* 64MB SDRAM -* LCD Display -* Configurable Jumper options for 66,85, and 100Mhz memory bus - - -BMW System Address Map -====================== -BMW uses the MPC8245 CHRP Address MAP B found in the MPC8245 Users Manual -(P.121, Section 3.1 Address Maps, Address Map B). Other I/O devices found -onboard the processor module are listed briefly below: - -0x00000000 - 0x40000000 - 64MB SDRAM SIMM - (Unregistered PC-100 SDRAM DIMM Module) - -0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000 - TSOP 16MB (MD2211-D16-V3) - -0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000 - DIP32 (Socketed 16MB - 1GB ) * - NOTE: this is not populated on all systems. - -0x7c000000 - 0x7c000000 - Reset Register - (Write 0 to reset) - -0x7c000001 - 0x7c000001 - System LED - (Clear Bit 7 to turn on, set to shut off) - -0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3 - (Clear bit 7 to reset, set to assert IRQ3) - -0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register - (Clear bit 7 to make R/W, set to make R/O) - -0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character - 5x7 Dot Matrix Alphanumeric Display - (Each byte sets the appropriate character) - -0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC - NVRAM Memory Region - -0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC - Realtime Clock Registers - -0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom - (AMD AM29F040, ST 29W040B) - -0xFFF00100 - System Reset Vector - - -IO/MMU (BAT) Configuration -====================== -The following Block-Address-Translation (BAT) configuration -is recommended to access all I/O devices. - -#define CONFIG_SYS_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - - -Interrupt Mappings -====================== -BMW uses MPC8245 discrete mode interrupts. With the following -hardwired mappings: - -BCM5701 10/100/1000 Ethernet IRQ1 -CompactPCI Interrupt A IRQ2 -RTC/Watchdog Interrupt IRQ3 -Internal NS16552 UART IRQ4 - - -Jumper Settings -====================== - -BMW has a jumper (JP600) for selecting 66, 85, or 100Mhz memory bus. -A jumper (X) is a 0 bit. - -Hence 66= 10110 - 85= 11000 - 100= 10000 - -Jumper Settings for various Speeds -======================= -J1 J2 J3 J4 J5 - X X 66Mhz -======================= -J1 J2 J3 J4 J5 - X X X 85Mhz -======================= -J1 J2 J3 J4 J5 - X X X X 100Mhz -======================= - -Obviously, 100Mhz memory bus is recommended for optimum performance. - - -U-Boot -=============== -Broadcom BMW board is supported under config_BWM option. -Supported features: - -- NVRAM setenv/getenv (used by Linux Kernel for configuration variables) -- BCM570x TFTP file transfer support -- LCD Display Support -- DOC Support - (underway) - - -U-Boot 1.2.0 (Aug 6 2002 - 17:44:48) - -CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache -Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) -Built: Aug 6 2002 at 17:44:37 -Local Bus at 66 MHz -DRAM: 64 MB -FLASH: 4095 MB -In: serial -Out: serial -Err: serial -DOC: No DiskOnChip found -Hit any key to stop autoboot: 0 -=>printenv -bootdelay=5 -baudrate=9600 -clocks_in_mhz=1 -hostname=switch-2 -bootcmd=tftp 100000 vmlinux.img;bootm -gateway=10.16.64.1 -ethaddr=00:00:10:18:10:10 -nfsroot=172.16.40.111:/boot/root-fs -filesize=5ec8c -netmask=255.255.240.0 -ipaddr=172.16.40.114 -serverip=172.16.40.111 -root=/dev/nfs -stdin=serial -stdout=serial -stderr=serial - -Environment size: 315/8172 bytes -=>boot - - -DevTools -======== -ELDK - DENX Embedded Linux Development Kit - -ROM Emulator - Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time) - Grammar Engine PL32E 32Pin PLCC Emulation cables - Grammar Engine 3VA8CON (3Volt adapter with Short cables) - Grammar Engine FPNET PromICE Ethernet Adapters - -ICE - WRS/EST VisionICE-II (PPC8240) - - -=>reset - - -U-Boot 1.2.0 (Aug 6 2002 - 17:44:48) - -CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache -Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) -Built: Aug 6 2002 at 17:44:37 -Local Bus at 66 MHz -DRAM: 64 MB -FLASH: 4095 MB -In: serial -Out: serial -Err: serial -DOC: No DiskOnChip found -Hit any key to stop autoboot: 0 - -Broadcom BCM5701 1000Base-T: bus 0, device 13, function 0: MBAR=0x80100000 -BCM570x PCI Memory base address @0x80100000 -eth0:Broadcom BCM5701 1000Base-T: 100 Mbps half duplex link up, flow control OFF -eth0: Broadcom BCM5701 1000Base-T @0x80100000,node addr 000010181010 -eth0: BCM5700 with Broadcom BCM5701 Integrated Copper transceiver found -eth0: 32-bit PCI 33MHz, MTU: 1500,Rx Checksum ON -ARP broadcast 1 -TFTP from server 172.16.40.111; our IP address is 172.16.40.114 -Filename 'vmlinux.img'. -Load address: 0x100000 -Loading: ################################################################# - ####################################T ############################# - ###################### -done -Bytes transferred = 777199 (bdbef hex) - -eth0:Broadcom BCM5701 1000Base-T,HALT,POWER DOWN,done - offline. -## Booting image at 00100000 ... - Image Name: vmlinux.bin.gz - Created: 2002-08-06 6:30:13 UTC - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 777135 Bytes = 758 kB = 0 MB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK -Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb -Linux version 2.4.19-rc3 (jfd@que) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #168 Mon Aug 5 23:29:20 PDT 2002 -CPU:82xx: 32 I-Cache Block Size, 32 D-Cache Block Size PVR: 0x810000 -U-Boot Environment: 0xc01b08f0 -IP PNP: 802.3 Ethernet Address=<0:0:10:18:10:10> -cpu0: MPC8245/KAHLUA-II : BMW Platform : 64MB RAM: BPLD Rev. 6e -NOTICE: mounting root file system via NFS -IP PNP: switch-2: eth0 IP 172.16.40.114/255.255.240.0 gateway 10.16.64.1 server 172.16.40.111 -On node 0 totalpages: 16384 -zone(0): 16384 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: console=ttyS0,9600 ip=172.16.40.114:172.16.40.111:10.16.64.1:255.255.240.0:switch-2:eth0 root=/dev/nfs rw nfsroot=172.16.40.111:/boot/root-fs,timeo=200,retrans=500 nfsaddrs=172.16.40.114:172.16.40.111 -root_dev_setup:/dev/nfs or 00:ff -time_init: decrementer frequency = 16.501145 MHz -Calibrating delay loop... 175.71 BogoMIPS -Memory: 62572k available (1396k kernel code, 436k data, 100k init, 0k highmem) -Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) -Inode cache hash table entries: 4096 (order: 3, 32768 bytes) -Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) -Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) -Page-cache hash table entries: 16384 (order: 4, 65536 bytes) -POSIX conformance testing by UNIFIX -PCI: Probing PCI hardware -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) -devfs: devfs_debug: 0x0 -devfs: boot_options: 0x1 -Installing knfsd (copyright (C) 1996 okir@monad.swb.de). -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -Testing ttyS0 (0xf7f51500, 0xf7f51500)... -Testing ttyS1 (0xfc004600, 0xfc004600)... -ttyS00 at 0xf7f51500 (irq = 24) is a ST16650 -ttyS01 at 0xfc004600 (irq = 25) is a 16550A -Real Time Clock Driver v1.10e -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -loop: loaded (max 8 devices) -TFFS 5.1.1 Flash disk driver for DiskOnChip -Copyright (C) 1998,2001 M-Systems Flash Disk Pioneers Ltd. -DOC device(s) found: 1 -fl_init: registered device at major: 100 -fl_geninit: registered device at major: 100 -Partition check: - fla: p1 -partition: /dev/fl/0: start_sect: 0,nr_sects: 32000 Fl_blk_size[]: 16000KB -partition: /dev/fl/1: start_sect: 2,nr_sects: 31998 Fl_blk_size[]: 15999KB -partition: /dev/fl/2: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB -partition: /dev/fl/3: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB -Broadcom Gigabit Ethernet Driver bcm5700 ver. 3.0.7 (07/17/02) -eth0: Broadcom BCM5701 found at mem bfff0000, IRQ 1, node addr 000010181010 -eth0: Broadcom BCM5701 Integrated Copper transceiver found -eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON -bond0 registered without MII link monitoring, in bonding mode. -rtc: unable to get misc minor -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 4096 bind 4096) -bcm5700: eth0 NIC Link is UP, 100 Mbps half duplex -IP-Config: Gateway not on directly connected network. -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -802.1Q VLAN Support v1.7 Ben Greear -All bugs added by David S. Miller -Looking up port of RPC 100003/2 on 172.16.40.111 -Looking up port of RPC 100005/1 on 172.16.40.111 -VFS: Mounted root (nfs filesystem). -Mounted devfs on /dev -Freeing unused kernel memory: 100k init -INIT: version 2.78 booting -Mounting local filesystems... -not mounted anything -Setting up symlinks in /dev...done. -Setting up extra devices in /dev...done. -Starting devfsd...Started device management daemon for /dev -INIT: Entering runlevel: 2 -Starting internet superserver: inetd. - - -Welcome to Linux/PPC -MPC8245/BMW - - -switch-2 login: root -Password: -PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0) -Last login: Thu Nov 25 11:51:14 1920 on console - - -Welcome to Linux/PPC -MPC8245/BMW - - -login[49]: ROOT LOGIN on `console' - -root@switch-2:~# cat /proc/cpuinfo -cpu : 82xx -revision : 16.20 (pvr 8081 1014) -bogomips : 175.71 -vendor : Broadcom -machine : BMW/MPC8245 -root@switch-2:~# diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c deleted file mode 100644 index 5ba6c09d1c..0000000000 --- a/board/bmw/bmw.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2002 - * James F. Dougherty, Broadcom Corporation, jfd@broadcom.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "bmw.h" -#include "m48t59y.h" -#include - - -int checkboard(void) -{ - ulong busfreq = get_bus_freq(0); - char buf[32]; - - puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n"); - printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME); - /* printf("MPLD: Revision %d\n", SYS_REVID_GET()); */ - printf("Local Bus at %s MHz\n", strmhz(buf, busfreq)); - return 0; -} - -phys_size_t initdram(int board_type) -{ - return 64*1024*1024; -} - - -void -get_tod(void) -{ - int year, month, day, hour, minute, second; - - m48_tod_get(&year, - &month, - &day, - &hour, - &minute, - &second); - - printf(" Current date/time: %d/%d/%d %d:%d:%d \n", - month, day, year, hour, minute, second); - -} - -/* - * EPIC, PCI, and I/O devices. - * Initialize Mousse Platform, probe for PCI devices, - * Query configuration parameters if not set. - */ -int misc_init_f (void) -{ -#if 0 - m48_tod_init(); /* Init SGS M48T59Y TOD/NVRAM */ - printf("RTC: M48T589 TOD/NVRAM (%d) bytes\n", - TOD_NVRAM_SIZE); - get_tod(); -#endif - - sys_led_msg("BOOT"); - return 0; -} - - -/* - * Initialize PCI Devices, report devices found. - */ -struct pci_controller hose; - -void pci_init_board (void) -{ - pci_mpc824x_init(&hose); - /* pci_dev_init(0); */ -} - -/* - * Write characters to LCD display. - * Note that the bytes for the first character is the last address. - */ -void -sys_led_msg(char* msg) -{ - LED_REG(0) = msg[3]; - LED_REG(1) = msg[2]; - LED_REG(2) = msg[1]; - LED_REG(3) = msg[0]; -} - -#ifdef CONFIG_CMD_DOC -/* - * Map onboard TSOP-16MB DOC FLASH chip. - */ -void doc_init (void) -{ - doc_probe(DOC_BASE_ADDR); -} -#endif - -#define NV_ADDR ((volatile unsigned char *) CONFIG_ENV_ADDR) - -/* Read from NVRAM */ -void* -nvram_read(void *dest, const long src, size_t count) -{ - int i; - volatile unsigned char* d = (unsigned char*)dest; - volatile unsigned char* s = (unsigned char*)src; - - for( i = 0; i < count;i++) - d[i] = s[i]; - - return dest; -} - -/* Write to NVRAM */ -void -nvram_write(long dest, const void *src, size_t count) -{ - int i; - volatile unsigned char* d = (unsigned char*)dest; - volatile unsigned char* s = (unsigned char*)src; - - SYS_TOD_UNPROTECT(); - - for( i = 0; i < count;i++) - d[i] = s[i]; - - SYS_TOD_PROTECT(); -} diff --git a/board/bmw/bmw.h b/board/bmw/bmw.h deleted file mode 100644 index dd97569303..0000000000 --- a/board/bmw/bmw.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * BMW/MPC8245 Board definitions. - * For more info, see http://www.vooha.com/ - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * James Dougherty (jfd@broadcom.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __BMW_H -#define __BMW_H - -/* System addresses */ - -#define PCI_SPECIAL_BASE 0xfe000000 -#define PCI_SPECIAL_SIZE 0x01000000 - -#define EUMBBAR_VAL 0x80500000 /* Location of EUMB region */ -#define EUMBSIZE 0x00100000 /* Size of EUMB region */ - -/* Extended ROM space devices */ -#define DOC_BASE_ADDR 0xff000000 /* Onboard DOC TSOP 16MB */ -#define DOC2_BASE_ADDR 0x70000000 /* DIP32 socket -> 1GB */ -#define XROM_BASE_ADDR 0x7c000000 /* RCS2 (PAL / Satellite IO) */ -#define PLD_REG_BASE XROM_BASE_ADDR -#define LED_REG_BASE (XROM_BASE_ADDR | 0x2000) -#define TOD_BASE (XROM_BASE_ADDR | 0x4000) -#define LED_REG(x) (*(volatile unsigned char *) \ - (LED_REG_BASE + (x))) -#define XROM_DEV_SIZE 0x00006000 - -#define ENET_DEV_BASE 0x80000000 - -#define PLD_REG(off) (*(volatile unsigned char *)\ - (PLD_REG_BASE + (off))) - -#define PLD_REVID_B1 0x7f /* Fix me */ -#define PLD_REVID_B2 0x01 /* Fix me */ - -#define SYS_HARD_RESET() { for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */ -#define SYS_REVID_GET() ((int) PLD_REG(0) & 0x7f) -#define SYS_LED_OFF() (PLD_REG(1) |= 0x80) -#define SYS_LED_ON() (PLD_REG(1) &= ~0x80) -#define SYS_WATCHDOG_IRQ3() (PLD_REG(2) |= 0x80) -#define SYS_WATCHDOG_RESET() (PLD_REG(2) &= ~0x80) -#define SYS_TOD_PROTECT() (PLD_REG(3) |= 0x80) -#define SYS_TOD_UNPROTECT() (PLD_REG(3) &= ~0x80) - -#define TOD_REG_BASE (TOD_BASE | 0x1ff0) -#define TOD_NVRAM_BASE TOD_BASE -#define TOD_NVRAM_SIZE 0x1ff0 -#define TOD_NVRAM_LIMIT (TOD_NVRAM_BASE + TOD_NVRAM_SIZE) -#define RTC(r) (TOD_BASE + r) - -/* Onboard BCM570x device */ -#define PCI_ENET_IOADDR 0x80000000 -#define PCI_ENET_MEMADDR 0x80000000 - - -#ifndef __ASSEMBLY__ -/* C Function prototypes */ -void sys_led_msg(char* msg); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __BMW_H */ diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S deleted file mode 100644 index 63c29d500f..0000000000 --- a/board/bmw/early_init.S +++ /dev/null @@ -1,1170 +0,0 @@ -#include -#include -#include -#include -#include - -#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */ - - -/* - * Initialize the MMU using BAT entries and hardwired TLB - * This obviates the need for any code in cpu_init_f which - * configures the BAT registers. -*/ -#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */ - .global iommu_setup - /* Initialize IO/MMU mappings via BAT method Ch. 7, - * PPC Programming Reference - */ -iommu_setup: - -/* initialize the BAT registers (SPRs 528 - 543 */ -#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */ -#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */ -#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */ -#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */ -#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */ -#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */ -#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */ -#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */ -#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */ -#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */ -#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */ -#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */ -#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */ -#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */ -#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */ -#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */ - - -/* PowerPC processors do not necessarily initialize the BAT - registers on power-up or reset. So they are in an unknown - state. Before programming the BATs for the first time, all - BAT registers MUST have their Vs and Vp bits cleared in the - upper BAT half in order to avoid possibly having 2 BATs - valid and mapping the same memory region. - - The reason for this is that, even with address translation - disabled, multiple BAT hits for an address are treated as - programming errors and can cause unpredictable results. - - It is up to the software to make sure it never has 2 IBAT - mappings or 2 DBAT mappings that are valid for the same - addresses. It is not necessary to perform this code - sequence every time the BATs are programmed, only when - there is a possibility that there may be overlapping BAT - entries. - - When programming the BATs in non-reset scenarios, even if - you are sure that your new mapping will not temporarily - create overlapping regions, it is still a wise idea to - invalidate a BAT entry by setting its upper BAT register to - all 0's before programming it. This will avoid having a - BAT marked valid that is in an unknown or transient state -*/ - - addis r5,0,0x0000 - mtibat0u(r5) - mtibat0l(r5) - mtibat1u(r5) - mtibat1l(r5) - mtibat2u(r5) - mtibat2l(r5) - mtibat3u(r5) - mtibat3l(r5) - mtdbat0u(r5) - mtdbat0l(r5) - mtdbat1u(r5) - mtdbat1l(r5) - mtdbat2u(r5) - mtdbat2l(r5) - mtdbat3u(r5) - mtdbat3l(r5) - isync - -/* - * Set up I/D BAT0 - */ - lis r4, CONFIG_SYS_DBAT0L@h - ori r4, r4, CONFIG_SYS_DBAT0L@l - lis r3, CONFIG_SYS_DBAT0U@h - ori r3, r3, CONFIG_SYS_DBAT0U@l - - mtdbat0l(r4) - isync - mtdbat0u(r3) - isync - sync - - lis r4, CONFIG_SYS_IBAT0L@h - ori r4, r4, CONFIG_SYS_IBAT0L@l - lis r3, CONFIG_SYS_IBAT0U@h - ori r3, r3, CONFIG_SYS_IBAT0U@l - - isync - mtibat0l(r4) - isync - mtibat0u(r3) - isync - -/* - * Set up I/D BAT1 - */ - lis r4, CONFIG_SYS_IBAT1L@h - ori r4, r4, CONFIG_SYS_IBAT1L@l - lis r3, CONFIG_SYS_IBAT1U@h - ori r3, r3, CONFIG_SYS_IBAT1U@l - - isync - mtibat1l(r4) - isync - mtibat1u(r3) - isync - mtdbat1l(r4) - isync - mtdbat1u(r3) - isync - sync - -/* - * Set up I/D BAT2 - */ - lis r4, CONFIG_SYS_IBAT2L@h - ori r4, r4, CONFIG_SYS_IBAT2L@l - lis r3, CONFIG_SYS_IBAT2U@h - ori r3, r3, CONFIG_SYS_IBAT2U@l - - isync - mtibat2l(r4) - isync - mtibat2u(r3) - isync - mtdbat2l(r4) - isync - mtdbat2u(r3) - isync - sync - -/* - * Setup I/D BAT3 - */ - lis r4, CONFIG_SYS_IBAT3L@h - ori r4, r4, CONFIG_SYS_IBAT3L@l - lis r3, CONFIG_SYS_IBAT3U@h - ori r3, r3, CONFIG_SYS_IBAT3U@l - - isync - mtibat3l(r4) - isync - mtibat3u(r3) - isync - mtdbat3l(r4) - isync - mtdbat3u(r3) - isync - sync - - -/* - * Invalidate all 64 TLB's - */ - lis r3, 0 - mtctr r3 - lis r5, 4 - -tlblp: - tlbie r3 - sync - addi r3, r3, 0x1000 - cmplw r3, r5 - blt tlblp - - sync - -/* - * Enable Data Translation - */ - lis r4, MEMORY_MGMT_MSR_BITS@h - ori r4, r4, MEMORY_MGMT_MSR_BITS@l - mfmsr r3 - or r3, r4, r3 - mtmsr r3 - isync - sync - - blr - - -#ifdef USE_V2_INIT -/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */ -/* Macro for hiadjust and lo */ -#define HIADJ(arg) arg@ha -#define HI(arg) arg@h -#define LO(arg) arg@l - -#undef LOADPTR -#define LOADPTR(reg,const32) \ - addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32) - -.globl early_init_f - -early_init_f: -/* MPC8245/BMW CPCI System Init - * Jimmy Blair, Broadcom Corp, 2002. - */ - mflr r11 - /* Zero-out registers */ - - addis r0,r0,0 - mtspr SPRG0,r0 - mtspr SPRG1,r0 - mtspr SPRG2,r0 - mtspr SPRG3,r0 - - /* Set MPU/MSR to a known state. Turn on FP */ - - LOADPTR (r3, MSR_FP) - sync - mtmsr r3 - isync - - /* Init the floating point control/status register */ - - mtfsfi 7,0x0 - mtfsfi 6,0x0 - mtfsfi 5,0x0 - mtfsfi 4,0x0 - mtfsfi 3,0x0 - mtfsfi 2,0x0 - mtfsfi 1,0x0 - mtfsfi 0,0x0 - isync - - /* Set MPU/MSR to a known state. Turn off FP */ - -#if 1 /* Turn off floating point (remove to keep FP on) */ - andi. r3, r3, 0 - sync - mtmsr r3 - isync -#endif - - /* Init the Segment registers */ - - andi. r3, r3, 0 - isync - mtsr 0,r3 - isync - mtsr 1,r3 - isync - mtsr 2,r3 - isync - mtsr 3,r3 - isync - mtsr 4,r3 - isync - mtsr 5,r3 - isync - mtsr 6,r3 - isync - mtsr 7,r3 - isync - mtsr 8,r3 - isync - mtsr 9,r3 - isync - mtsr 10,r3 - isync - mtsr 11,r3 - isync - mtsr 12,r3 - isync - mtsr 13,r3 - isync - mtsr 14,r3 - isync - mtsr 15,r3 - isync - - /* Turn off data and instruction cache control bits */ - - mfspr r3, HID0 - isync - rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */ - sync - isync - mtspr HID0, r4 /* HID0 = r4 */ - isync - - /* Get cpu type */ - - mfspr r28, PVR - rlwinm r28, r28, 16, 16, 31 - - /* invalidate the MPU's data/instruction caches */ - - lis r3, 0x0 - cmpli 0, 0, r28, CPU_TYPE_603 - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_603E - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_603P - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_604R - bne cpuNot604R - -cpuIs604R: - lis r3, 0x0 - mtspr HID0, r3 /* disable the caches */ - isync - ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */ - -cpuNot604R: - ori r3, r3, (HID0_ICFI |HID0_DCI) - -cpuIs603: - ori r3, r3, (HID0_ICE | HID0_DCE) - or r4, r4, r3 /* set bits */ - sync - isync - mtspr HID0, r4 /* HID0 = r4 */ - andc r4, r4, r3 /* clear bits */ - isync - cmpli 0, 0, r28, CPU_TYPE_604 - beq cpuIs604 - cmpli 0, 0, r28, CPU_TYPE_604E - beq cpuIs604 - cmpli 0, 0, r28, CPU_TYPE_604R - beq cpuIs604 - mtspr HID0, r4 - isync - -#ifdef USER_I_CACHE_ENABLE - b instCacheOn603 -#else - b cacheEnableDone -#endif - -cpuIs604: - LOADPTR (r5, 0x1000) /* loop count, 0x1000 */ - mtspr CTR, r5 -loopDelay: - nop - bdnz loopDelay - isync - mtspr HID0, r4 - isync - - /* turn the Instruction cache ON for faster FLASH ROM boots */ - -#ifdef USER_I_CACHE_ENABLE - - ori r4, r4, (HID0_ICE | HID0_ICFI) - isync /* Synchronize for ICE enable */ - b writeReg4 -instCacheOn603: - ori r4, r4, (HID0_ICE | HID0_ICFI) - rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */ - - /* - * The setting of the instruction cache enable (ICE) bit must be - * preceded by an isync instruction to prevent the cache from being - * enabled or disabled while an instruction access is in progress. - */ - isync -writeReg4: - mtspr HID0, r4 /* Enable Instr Cache & Inval cache */ - cmpli 0, 0, r28, CPU_TYPE_604 - beq cacheEnableDone - cmpli 0, 0, r28, CPU_TYPE_604E - beq cacheEnableDone - - mtspr HID0, r3 /* using 2 consec instructions */ - /* PPC603 recommendation */ -#endif -cacheEnableDone: - - /* Detect map A or B */ - - addis r5,r0, HI(CHRP_REG_ADDR) - addis r6,r0, HI(CHRP_REG_DATA) - LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */ - LOADPTR (r8, BMC_BASE) - - stwbrx r8,0,(r5) - lwbrx r3,0,(r6) /* Store read value to r3 */ - cmp 0,0,r3,r7 - beq cr0, X4_KAHLUA_START - - /* It's not an 8240, is it an 8245? */ - - LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */ - cmp 0,0,r3,r7 - beq cr0, X4_KAHLUA_START - - /* Save the PCI controller type in r7 */ - mr r7, r3 - - LOADPTR (r5, PREP_REG_ADDR) - LOADPTR (r6, PREP_REG_DATA) - -X4_KAHLUA_START: - /* MPC8245 changes begin here */ - LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */ - stwbrx r3,0,r5 - li r4, 6 /* Command register value */ - sthbrx r4, 0, r6 - - LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */ - stwbrx r3,0,r5 - li r4, -1 /* Write-to-clear all bits */ - li r3, 2 /* PCI_STATUS is at +2 offset */ - sthbrx r4, r3, r6 - - /*-------PROC_INT1_ADR */ - - LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xff141b98) - stwbrx r4,0,r6 - - /*-------PROC_INT2_ADR */ - - LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */ - stwbrx r3,0,r5 - lis r4, 0x2000 /* Flush PCI config writes */ - stwbrx r4,0,r6 - - LOADPTR (r9, KAHLUA2_ID) - cmpl 0, 0, r7, r9 - bne L1not8245 - - /* MIOCR1 -- turn on bit for DLL delay */ - - LOADPTR (r3, MIOCR1_ADR_X) - stwbrx r3,0,r5 - li r4, 0x04 - stb r4, MIOCR1_SHIFT(r6) - - /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ - /* SDRAM_CLK_DEL (0x77)*/ - - LOADPTR (r3, MIOCR2_ADR_X) - stwbrx r3,0,r5 - li r4, 0x10 - stb r4, MIOCR2_SHIFT(r6) - - /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */ - - LOADPTR (r3, PMCR2_ADR_X) - stwbrx r3,0,r5 - li r4, 0x20 - stb r4, PMCR2_SHIFT(r6) - - /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */ - - LOADPTR (r3, EUMBBAR) - stwbrx r3,0,r5 - LOADPTR (r4, CONFIG_SYS_EUMB_ADDR) - stwbrx r4,0,r6 - -L1not8245: - - /* Toggle the DLL reset bit in AMBOR */ - - LOADPTR (r3, AMBOR) - stwbrx r3,0,r5 - lbz r4, 0(r6) - - andi. r4, r4, 0xdf - stb r4, 0(r6) /* Clear DLL_RESET */ - sync - - ori r4, r4, 0x20 /* Set DLL_RESET */ - stb r4, 0(r6) - sync - - andi. r4, r4, 0xdf - stb r4, 0(r6) /* Clear DLL_RESET */ - - - /* Enable RCS2, use supplied timings */ - LOADPTR (r3, ERCR1) - stwbrx r3,0,r5 - LOADPTR (r4, 0x80408000) - stwbrx r4,0,r6 - - /* Disable RCS3 parameters */ - LOADPTR (r3, ERCR2) - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - /* RCS3 at 0x70000000, 64KBytes */ - LOADPTR (r3, ERCR2) - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000004) - stwbrx r4,0,r6 - - /*-------MCCR1 */ - -#ifdef INCLUDE_ECC -#define MC_ECC 1 -#else /* INCLUDE_ECC */ -#define MC_ECC 0 -#endif /* INCLUDE_ECC */ - -#define MC1_ROMNAL 8 /* 0-15 */ -#define MC1_ROMFAL 11 /* 0-31 */ -#define MC1_DBUS_SIZE 0 /* 0-3, read only */ -#define MC1_BURST 0 /* 0-1 */ -#define MC1_MEMGO 0 /* 0-1 */ -#define MC1_SREN 1 /* 0-1 */ -#define MC1_RAM_TYPE 0 /* 0-1 */ -#define MC1_PCKEN MC_ECC /* 0-1 */ -#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */ - - LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \ - MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \ - MC1_MEMGO << 19 | MC1_SREN << 18 | \ - MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 ) - li r3, MC1_BANKBITS - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne BankBitsAdd - cmpli 0, 0, r3, 0x5555 - beq K2BankBitsHack /* On 8245, 5555 ==> 0 */ -BankBitsAdd: - ori r4, r3, 0 -K2BankBitsHack: - stwbrx r4, 0, r6 - - /*------- MCCR2 */ - -#define MC2_TS_WAIT_TIMER 0 /* 0-7 */ -#define MC2_ASRISE 8 /* 0-15 */ -#define MC2_ASFALL 4 /* 0-15 */ -#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */ -#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */ -#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */ -#define MC2_ECC_EN 0 /* 0-1 */ -#define MC2_EDO 0 /* 0-1 */ -/* -* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM. -* May need to be decreased for 100 MHz -*/ -#define MC2_REFINT 0x3a5 /* 0-0x3fff */ -#define MC2_RSV_PG 0 /* 0-1 */ -#define MC2_RMW_PAR MC_ECC /* 0-1 */ - - LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \ - MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \ - MC2_WRITE_PARITY_CHK_EN << 19 | \ - MC2_INLRD_PARECC_CHK_EN << 18 | \ - MC2_ECC_EN << 17 | MC2_EDO << 16 | \ - MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR) - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne notK2 - /* clear Kahlua2 reserved bits */ - LOADPTR (r3, 0xfffcffff) - and r4, r4, r3 -notK2: - stwbrx r4,0,r6 - - /*------- MCCR3 */ - -#define MC_BSTOPRE 0x079 /* 0-0x7ff */ - -#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf) -#define MC3_REFREC 8 /* 0-15 */ -#define MC3_RDLAT (4+MC_ECC) /* 0-15 */ -#define MC3_CPX 0 /* 0-1 */ -#define MC3_RAS6P 0 /* 0-15 */ -#define MC3_CAS5 0 /* 0-7 */ -#define MC3_CP4 0 /* 0-7 */ -#define MC3_CAS3 0 /* 0-7 */ -#define MC3_RCD2 0 /* 0-7 */ -#define MC3_RP1 0 /* 0-7 */ - - LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \ - MC3_RDLAT << 20 | MC3_CPX << 19 | \ - MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \ - MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1) - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne notK2b - /* clear Kahlua2 reserved bits */ - LOADPTR (r3, 0xff000000) - and r4, r4, r3 -notK2b: - stwbrx r4,0,r6 - - /*------- MCCR4 */ - -#define MC4_PRETOACT 3 /* 0-15 */ -#define MC4_ACTOPRE 5 /* 0-15 */ -#define MC4_WMODE 0 /* 0-1 */ -#define MC4_INLINE MC_ECC /* 0-1 */ -#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */ -#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3) -#define MC4_REGDIMM 0 /* 0-1 */ -#define MC4_SDMODE_CAS 2 /* 0-7 */ -#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */ -#define MC4_SDMODE_WRAP 0 /* 0-1 */ -#define MC4_SDMODE_BURST 2 /* 0-7 */ -#define MC4_ACTORW 3 /* 0-15 */ -#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf) - - LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \ - MC4_WMODE << 23 | MC4_INLINE << 22 | \ - MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \ - MC4_DBUS_RCS1 << 17 | \ - MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \ - MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \ - MC4_ACTORW << 4 | MC4_BSTOPRE_L) - cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */ - bne notK2c - /* Turn on Kahlua2 extended ROM space */ - LOADPTR (r3, 0x00200000) - or r4, r4, r3 -notK2c: - stwbrx r4,0,r6 - -#ifdef INCLUDE_ECC - /*------- MEM_ERREN1 */ - - LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */ - stwbrx r3,0,r5 - lwbrx r4,0,r6 - ori r4,r4,4 /* Set MEM_PERR_EN */ - stwbrx r4,0,r6 -#endif /* INCLUDE_ECC */ - - /*------- MSAR/MEAR */ - - LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xc0804000) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xc0804000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x01010101) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xffbf7f3f) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xffbf7f3f) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x01010101) - stwbrx r4,0,r6 - - /*-------ODCR */ - - LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */ - stwbrx r3,0,r5 - - li r4, 0x7f - stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */ - - /*-------MBEN */ - - LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */ - stwbrx r3,0,r5 - li r4, 0x01 /* Enable bank 0 */ - stb r4, 0(r6) /* MBEN is at +0 offset */ - -#if 0 /* Jimmy: I think page made is broken */ - /*-------PGMAX */ - - LOADPTR (r3, MPM_ADR_X) - stwbrx r3,0,r5 - li r4, 0x32 - stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */ -#endif - - /* Wait before initializing other registers */ - - lis r4,0x0001 - mtctr r4 - -KahluaX4wait200us: - bdnz KahluaX4wait200us - - /* Set MEMGO bit */ - - LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */ - stwbrx r3,0,r5 - lwbrx r4,0,r6 /* old MCCR1 */ - oris r4,r4,0x0008 /* MEMGO=1 */ - stwbrx r4, 0, r6 - - /* Wait again */ - - addis r4,r0,0x0002 - ori r4,r4,0xffff - - mtctr r4 - -KahluaX4wait8ref: - bdnz KahluaX4wait8ref - - sync - eieio - mtlr r11 - blr - -#else /* USE_V2_INIT */ - - -/* U-Boot works, but memory will not run reliably for all address ranges. - * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not - * initialized correctly. Could work if debugged. - */ -/* PCI Support routines */ - - .globl __pci_config_read_32 -__pci_config_read_32: - lis r4, 0xfec0 - stwbrx r3, r0, r4 - sync - lis r4, 0xfee0 - lwbrx r3, 0, r4 - blr - .globl __pci_config_read_16 -__pci_config_read_16: - lis r4, 0xfec0 - andi. r5, r3, 2 - stwbrx r3, r0, r4 - sync - oris r4, r5, 0xfee0 - lhbrx r3, r0, r4 - blr - .globl __pci_config_read_8 -__pci_config_read_8: - lis r4, 0xfec0 - andi. r5, r3, 3 - stwbrx r3, r0, r4 - sync - oris r4, r5, 0xfee0 - lbz r3, 0(4) - blr - .globl __pci_config_write_32 -__pci_config_write_32: - lis r5, 0xfec0 - stwbrx r3, r0, r5 - sync - lis r5, 0xfee0 - stwbrx r4, r0, r5 - sync - blr - .globl __pci_config_write_16 -__pci_config_write_16: - lis r5, 0xfec0 - andi. r6, r3, 2 - stwbrx r3, r0, 5 - sync - oris r5, r6, 0xfee0 - sthbrx r4, r0, r5 - sync - blr - .globl __pci_config_write_8 -__pci_config_write_8: - lis r5, 0xfec0 - andi. r6, r3, 3 - stwbrx r3, r0, r5 - sync - oris r5, r6, 0xfee0 - stb r4, 0(r5) - sync - blr - .globl in_8 -in_8: - oris r3, r3, 0xfe00 - lbz r3,0(r3) - blr - .globl in_16 -in_16: - oris r3, r3, 0xfe00 - lhbrx r3, 0, r3 - blr - .globl in_16_ne -in_16_ne: - oris r3, r3, 0xfe00 - lhzx r3, 0, r3 - blr - .globl in_32 -in_32: - oris r3, r3, 0xfe00 - lwbrx r3, 0, r3 - blr - .globl out_8 -out_8: - oris r3, r3, 0xfe00 - stb r4, 0(r3) - eieio - blr - .globl out_16 -out_16: - oris r3, r3, 0xfe00 - sthbrx r4, 0, r3 - eieio - blr - .globl out_16_ne -out_16_ne: - oris r3, r3, 0xfe00 - sth r4, 0(r3) - eieio - blr - .globl out_32 -out_32: - oris r3, r3, 0xfe00 - stwbrx r4, 0, r3 - eieio - blr - .globl read_8 -read_8: - lbz r3,0(r3) - blr - .globl read_16 -read_16: - lhbrx r3, 0, r3 - blr - .globl read_32 -read_32: - lwbrx r3, 0, r3 - blr - .globl read_32_ne -read_32_ne: - lwz r3, 0(r3) - blr - .globl write_8 -write_8: - stb r4, 0(r3) - eieio - blr - .globl write_16 -write_16: - sthbrx r4, 0, r3 - eieio - blr - .globl write_32 -write_32: - stwbrx r4, 0, r3 - eieio - blr - .globl write_32_ne -write_32_ne: - stw r4, 0(r3) - eieio - blr - - -.globl early_init_f - -early_init_f: - mflr r11 - lis r10, 0x8000 - - /* PCI Latency Timer */ - li r4, 0x0d - ori r3, r10, PLTR@l - bl __pci_config_write_8 - - /* Cache Line Size */ - li r4, 0x08 - ori r3, r10, PCLSR@l - bl __pci_config_write_8 - - /* PCI Cmd */ - li r4, 6 - ori r3, r10, PCICR@l - bl __pci_config_write_16 - -#if 1 - /* PCI Stat */ - ori r3, r10, PCISR@l - bl __pci_config_read_16 - ori r4, r4, 0xffff - ori r3, r10, PCISR@l - bl __pci_config_write_16 -#endif - - /* PICR1 */ - lis r4, 0xff14 - ori r4, r4, 0x1b98 - ori r3, r10, PICR1@l - bl __pci_config_write_32 - - - /* PICR2 */ - lis r4, 0x0404 - ori r4, r4, 0x0004 - ori r3, r10, PICR2@l - bl __pci_config_write_32 - - /* MIOCR1 */ - li r4, 0x04 - ori r3, r10, MIOCR1@l - bl __pci_config_write_8 - - /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ - /* SDRAM_CLK_DEL (0x77)*/ - li r4, 0x10 - ori r3, r10, MIOCR2@l - bl __pci_config_write_8 - - /* EUMBBAR */ - lis r4, 0xfc00 - ori r3, r10, EUMBBAR@l - bl __pci_config_write_32 - - /* AMBOR */ - - /* Even if Address Map B is not being used (though it should), - * the memory DLL needs to be cleared/set/cleared before using memory. - */ - - ori r3, r10, AMBOR@l - bl __pci_config_read_8 /* get Current bits */ - - andi. r4, r4, 0xffdf - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Clear DLL_RESET */ - - ori r4, r4, 0x0020 - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Set DLL_RESET */ - - andi. r4, r4, 0xffdf - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Clear DLL_RESET */ - - /* ERCR1 */ - lis r4, 0x8040 /* Enable RCS2, use supplied timings */ - ori r4, r4, 0x8000 - ori r3, r10, ERCR1@l - bl __pci_config_write_32 - - /* ERCR2 */ - lis r4, 0x0000 /* Disable RCS3 parms */ - ori r4, r4, 0x0000 - ori r3, r10, ERCR2@l - bl __pci_config_write_32 - - /* ERCR3 */ - lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */ - ori r4, r4, 0x0004 - ori r3, r10, ERCR2@l - bl __pci_config_write_32 - - /* Preserve memgo bit */ - /* MCCR1 */ - -/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */ - lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */ -/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */ -/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */ -/* oris r4, r4, 0x0004 / Self-refresh enable */ - -/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */ -/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */ -/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */ - ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */ - - ori r3, r10, MCCR1@l - bl __pci_config_write_32 - - /* MCCR2 */ - - lis r4,0x0000 -/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */ - oris r4,r4,0x1000 /* ASRISE = 8 clocks */ - oris r4,r4,0x0080 /* ASFALL = 8 clocks */ -/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */ -/* oris r4,r4,0x0008 / Write parity check */ -/* oris r4,r4,0x0004 / SDRAM inline reads */ - - -/* Select a refresh rate; it needs to match the bus speed; if too */ -/* slow, data may be lost; if too fast, performance is lost. We */ -/* use the fastest value so we run at all speeds. */ -/* Refresh = (15600ns/busclk) - (213 (see UM)). */ - -/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */ -/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */ -/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */ -/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */ - ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */ -/* ori r4,r4,0x0002 / Reserve a page */ -/* ori r4,r4,0x0001 / RWM parity */ - - ori r3, r10, MCCR2@l - bl __pci_config_write_32 - - - /* MCCR3 */ - lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */ - oris r4,r4,0x0500 /* REFREC = 8 clocks */ - ori r3, r10, MCCR3@l - bl __pci_config_write_32 - - /* MCCR4 */ /* Turn on registered buffer mode */ - lis r4, 0x2000 /* PRETOACT = 3 clocks */ - oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */ -/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */ -/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */ - oris r4,r4,0x0020 /* EXTROM enabled */ - oris r4,r4,0x0010 /* Registered buffers */ -/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */ - oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */ - -/* ori r4,r4,0x8000 / Registered DIMMs */ - ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */ -/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */ -/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */ - ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */ - ori r4,r4,0x0030 /* ACTORW = 3 clocks */ - ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */ - - ori r3, r10, MCCR4@l - bl __pci_config_write_32 - - /* MSAR1 */ - lis r4, 0xc0804000@h - ori r4, r4, 0xc0804000@l - ori r3, r10, MSAR1@l - bl __pci_config_write_32 - - /* MSAR2 */ - lis r4, 0xc0804000@h - ori r4, r4, 0xc0804000@l - ori r3, r10, MSAR2@l - bl __pci_config_write_32 - - /* MESAR1 */ - lis r4, 0x00000000@h - ori r4, r4, 0x00000000@l - ori r3, r10, EMSAR1@l - bl __pci_config_write_32 - - /* MESAR2 */ - lis r4, 0x01010101@h - ori r4, r4, 0x01010101@l - ori r3, r10, EMSAR2@l - bl __pci_config_write_32 - - /* MEAR1 */ - lis r4, 0xffbf7f3f@h - ori r4, r4, 0xffbf7f3f@l - ori r3, r10, MEAR1@l - bl __pci_config_write_32 - - /* MEAR2 */ - lis r4, 0xffbf7f3f@h - ori r4, r4, 0xffbf7f3f@l - ori r3, r10, MEAR2@l - bl __pci_config_write_32 - - /* MEEAR1 */ - lis r4, 0x00000000@h - ori r4, r4, 0x00000000@l - ori r3, r10, EMEAR1@l - bl __pci_config_write_32 - - /* MEEAR2 */ - lis r4, 0x01010101@h - ori r4, r4, 0x01010101@l - ori r3, r10, EMEAR2@l - bl __pci_config_write_32 - - /* ODCR */ - li r4, 0x7f - ori r3, r10, ODCR@l - bl __pci_config_write_8 - - /* MBER */ - li r4, 0x01 - ori r3, r10, MBER@l - bl __pci_config_write_8 - - /* Page CTR aka PGMAX */ - li r4, 0x32 - ori r3, r10, 0x70 - bl __pci_config_write_8 - -#if 0 - /* CLK Drive */ - ori r4, r10, 0xfc01 /* Top bit will be ignored */ - ori r3, r10, 0x74 - bl __pci_config_write_16 -#endif - - /* delay */ - lis r7, 1 - mtctr r7 -label1: bdnz label1 - - /* Set memgo bit */ - /* MCCR1 */ - ori r3, r10, MCCR1@l - bl __pci_config_read_32 - lis r7, 0x0008 - or r4, r3, r7 - ori r3, r10, MCCR1@l - bl __pci_config_write_32 - - /* delay again */ - lis r7, 1 - mtctr r7 -label2: bdnz label2 -#if 0 -/* DEBUG: Infinite loop, write then read */ -loop: - lis r7, 0xffff - mtctr r7 - li r3, 0x5004 - lis r4, 0xa0a0 - ori r4, r4, 0x5050 - bl write_32_ne - li r3, 0x5004 - bl read_32_ne - bdnz loop -#endif - mtlr r11 - blr -#endif diff --git a/board/bmw/flash.c b/board/bmw/flash.c deleted file mode 100644 index 57ffe0890f..0000000000 --- a/board/bmw/flash.c +++ /dev/null @@ -1,779 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#define ROM_CS0_START 0xFF800000 -#define ROM_CS1_START 0xFF000000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word (flash_info_t * info, ulong dest, ulong data); - -#if 0 -static void flash_get_offsets (ulong base, flash_info_t * info); -#endif /* 0 */ - -/*flash command address offsets*/ - -#if 0 -#define ADDR0 (0x555) -#define ADDR1 (0x2AA) -#define ADDR3 (0x001) -#else -#define ADDR0 (0xAAA) -#define ADDR1 (0x555) -#define ADDR3 (0x001) -#endif - -#define FLASH_WORD_SIZE unsigned char - -/*----------------------------------------------------------------------- - */ - -#if 0 -static int byte_parity_odd (unsigned char x) __attribute__ ((const)); -#endif /* 0 */ -static unsigned long flash_id (unsigned char mfct, unsigned char chip) - __attribute__ ((const)); - -typedef struct { - FLASH_WORD_SIZE extval; - unsigned short intval; -} map_entry; - -#if 0 -static int byte_parity_odd (unsigned char x) -{ - x ^= x >> 4; - x ^= x >> 2; - x ^= x >> 1; - return (x & 0x1) != 0; -} -#endif /* 0 */ - - -static unsigned long flash_id (unsigned char mfct, unsigned char chip) -{ - static const map_entry mfct_map[] = { - {(FLASH_WORD_SIZE) AMD_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)}, - {(FLASH_WORD_SIZE) FUJ_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)}, - {(FLASH_WORD_SIZE) STM_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)}, - {(FLASH_WORD_SIZE) MT_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)}, - {(FLASH_WORD_SIZE) INTEL_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}, - {(FLASH_WORD_SIZE) INTEL_ALT_MANU, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)} - }; - - static const map_entry chip_map[] = { - {AMD_ID_F040B, FLASH_AM040}, - {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB} - }; - - const map_entry *p; - unsigned long result = FLASH_UNKNOWN; - - /* find chip id */ - for (p = &chip_map[0]; - p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++) - if (p->extval == chip) { - result = FLASH_VENDMASK | p->intval; - break; - } - - /* find vendor id */ - for (p = &mfct_map[0]; - p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++) - if (p->extval == mfct) { - result &= ~FLASH_VENDMASK; - result |= (unsigned long) p->intval << 16; - break; - } - - return result; -} - - -unsigned long flash_init (void) -{ - unsigned long i; - unsigned char j; - static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - - pflinfo->flash_id = FLASH_UNKNOWN; - pflinfo->size = 0; - pflinfo->sector_count = 0; - } - - for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - const unsigned long base_address = flash_banks[i]; - volatile FLASH_WORD_SIZE *const flash = - (FLASH_WORD_SIZE *) base_address; -#if 0 - volatile FLASH_WORD_SIZE *addr2; -#endif -#if 0 - /* write autoselect sequence */ - flash[0x5555] = 0xaa; - flash[0x2aaa] = 0x55; - flash[0x5555] = 0x90; -#else - flash[0xAAA << (3 * i)] = 0xaa; - flash[0x555 << (3 * i)] = 0x55; - flash[0xAAA << (3 * i)] = 0x90; -#endif - __asm__ __volatile__ ("sync"); - -#if 0 - pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]); -#else - pflinfo->flash_id = - flash_id (flash[0x0], flash[0x2 + 14 * i]); -#endif - - switch (pflinfo->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - pflinfo->size = 0x00080000; - pflinfo->sector_count = 8; - for (j = 0; j < 8; j++) { - pflinfo->start[j] = - base_address + 0x00010000 * j; - pflinfo->protect[j] = flash[(j << 16) | 0x2]; - } - break; - case FLASH_STM800AB: - pflinfo->size = 0x00100000; - pflinfo->sector_count = 19; - pflinfo->start[0] = base_address; - pflinfo->start[1] = base_address + 0x4000; - pflinfo->start[2] = base_address + 0x6000; - pflinfo->start[3] = base_address + 0x8000; - for (j = 1; j < 16; j++) { - pflinfo->start[j + 3] = - base_address + 0x00010000 * j; - } -#if 0 - /* check for protected sectors */ - for (j = 0; j < pflinfo->sector_count; j++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE - *) (pflinfo->start[j]); - if (pflinfo->flash_id & FLASH_MAN_SST) - pflinfo->protect[j] = 0; - else - pflinfo->protect[j] = addr2[2] & 1; - } -#endif - break; - } - /* Protect monitor and environment sectors - */ -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - /* reset device to read mode */ - flash[0x0000] = 0xf0; - __asm__ __volatile__ ("sync"); - } - - return flash_info[0].size + flash_info[1].size; -} - -#if 0 -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - -} -#endif /* 0 */ - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - static const char unk[] = "Unknown"; - const char *mfct = unk, *type = unk; - unsigned int i; - - if (info->flash_id != FLASH_UNKNOWN) { - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - mfct = "AMD"; - break; - case FLASH_MAN_FUJ: - mfct = "FUJITSU"; - break; - case FLASH_MAN_STM: - mfct = "STM"; - break; - case FLASH_MAN_SST: - mfct = "SST"; - break; - case FLASH_MAN_BM: - mfct = "Bright Microelectonics"; - break; - case FLASH_MAN_INTEL: - mfct = "Intel"; - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - type = "AM29F040B (512K * 8, uniform sector size)"; - break; - case FLASH_AM400B: - type = "AM29LV400B (4 Mbit, bottom boot sect)"; - break; - case FLASH_AM400T: - type = "AM29LV400T (4 Mbit, top boot sector)"; - break; - case FLASH_AM800B: - type = "AM29LV800B (8 Mbit, bottom boot sect)"; - break; - case FLASH_AM800T: - type = "AM29LV800T (8 Mbit, top boot sector)"; - break; - case FLASH_AM160T: - type = "AM29LV160T (16 Mbit, top boot sector)"; - break; - case FLASH_AM320B: - type = "AM29LV320B (32 Mbit, bottom boot sect)"; - break; - case FLASH_AM320T: - type = "AM29LV320T (32 Mbit, top boot sector)"; - break; - case FLASH_STM800AB: - type = "M29W800AB (8 Mbit, bottom boot sect)"; - break; - case FLASH_SST800A: - type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; - break; - case FLASH_SST160A: - type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; - break; - } - } - - printf ("\n Brand: %s Type: %s\n" - " Size: %lu KB in %d Sectors\n", - mfct, type, info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; i++) { - unsigned long size; - unsigned int erased; - unsigned long *flash = (unsigned long *) info->start[i]; - - /* - * Check if whole sector is erased - */ - size = (i != (info->sector_count - 1)) ? - (info->start[i + 1] - info->start[i]) >> 2 : - (info->start[0] + info->size - info->start[i]) >> 2; - - for (flash = (unsigned long *) info->start[i], erased = 1; - (flash != (unsigned long *) info->start[i] + size) - && erased; flash++) - erased = *flash == ~0x0UL; - - printf ("%s %08lX %s %s", - (i % 5) ? "" : "\n ", - info->start[i], - erased ? "E" : " ", info->protect[i] ? "RO" : " "); - } - - puts ("\n"); - return; -} - -#if 0 - -/* - * The following code cannot be run from FLASH! - */ -ulong flash_get_size (vu_long * addr, flash_info_t * info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr; - - printf ("flash_get_size: \n"); - /* Write auto select command: read Manufacturer ID */ - eieio (); - addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA; - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55; - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90; - value = addr2[0]; - - switch (value) { - case (FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - printf ("recognised manufacturer"); - - value = addr2[ADDR3]; /* device ID */ - debug ("\ndev_code=%x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) SST_ID_xF800A: - info->flash_id += FLASH_SST800A; - info->sector_count = 16; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) SST_ID_xF160A: - info->flash_id += FLASH_SST160A; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id, - info->sector_count, info->size); - /* set up sector start address table */ - if (info->flash_id & FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]); - if (info->flash_id & FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *) info->start[0]; - *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -#endif - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - unsigned char sh8b; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info-> - start - [sect] - - - info-> - start - [0]) << - sh8b)); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */ - udelay (30000); /* wait 30 ms */ - } else - addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] - - info-> - start[0]) << sh8b)); - while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != - (FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0]; - volatile FLASH_WORD_SIZE *dest2; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int flag; - int i; - unsigned char sh8b; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) + - info->start[0]); - - /* Check if Flash is (sufficiently) erased */ - if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i << sh8b] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c deleted file mode 100644 index 4e83b9076e..0000000000 --- a/board/bmw/m48t59y.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * SGS M48-T59Y TOD/NVRAM Driver - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. - * - * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * SGS M48-T59Y TOD/NVRAM Driver - * - * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and - * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD) - * registers which are used to set/get the internal date/time functions. - * - * This module implements Y2K compliance by taking full year numbers - * and translating back and forth from the TOD 2-digit year. - * - * NOTE: for proper interaction with an operating system, the TOD should - * be used to store Universal Coordinated Time (GMT) and timezone - * conversions should be used. - * - * Here is a diagram of the memory layout: - * - * +---------------------------------------------+ 0xffe0a000 - * | Non-volatile memory | . - * | | . - * | (8176 bytes of Non-volatile memory) | . - * | | . - * +---------------------------------------------+ 0xffe0bff0 - * | Flags | - * +---------------------------------------------+ 0xffe0bff1 - * | Unused | - * +---------------------------------------------+ 0xffe0bff2 - * | Alarm Seconds | - * +---------------------------------------------+ 0xffe0bff3 - * | Alarm Minutes | - * +---------------------------------------------+ 0xffe0bff4 - * | Alarm Date | - * +---------------------------------------------+ 0xffe0bff5 - * | Interrupts | - * +---------------------------------------------+ 0xffe0bff6 - * | WatchDog | - * +---------------------------------------------+ 0xffe0bff7 - * | Calibration | - * +---------------------------------------------+ 0xffe0bff8 - * | Seconds | - * +---------------------------------------------+ 0xffe0bff9 - * | Minutes | - * +---------------------------------------------+ 0xffe0bffa - * | Hours | - * +---------------------------------------------+ 0xffe0bffb - * | Day | - * +---------------------------------------------+ 0xffe0bffc - * | Date | - * +---------------------------------------------+ 0xffe0bffd - * | Month | - * +---------------------------------------------+ 0xffe0bffe - * | Year (2 digits only) | - * +---------------------------------------------+ 0xffe0bfff - */ -#include -#include -#include "bmw.h" - -/* - * Imported from mousse.h: - * - * TOD_REG_BASE Base of m48t59y TOD registers - * SYS_TOD_UNPROTECT() Disable NVRAM write protect - * SYS_TOD_PROTECT() Re-enable NVRAM write protect - */ - -#define YEAR 0xf -#define MONTH 0xe -#define DAY 0xd -#define DAY_OF_WEEK 0xc -#define HOUR 0xb -#define MINUTE 0xa -#define SECOND 0x9 -#define CONTROL 0x8 -#define WATCH 0x7 -#define INTCTL 0x6 -#define WD_DATE 0x5 -#define WD_HOUR 0x4 -#define WD_MIN 0x3 -#define WD_SEC 0x2 -#define _UNUSED 0x1 -#define FLAGS 0x0 - -#define M48_ADDR ((volatile unsigned char *) TOD_REG_BASE) - -int m48_tod_init(void) -{ - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] = 0; - M48_ADDR[WATCH] = 0; - M48_ADDR[INTCTL] = 0; - - /* - * If the oscillator is currently stopped (as on a new part shipped - * from the factory), start it running. - * - * Here is an example of the TOD bytes on a brand new M48T59Y part: - * 00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01 - */ - - if (M48_ADDR[SECOND] & 0x80) - M48_ADDR[SECOND] = 0; - - /* Is battery low */ - if ( M48_ADDR[FLAGS] & 0x10) { - printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n"); - } - - SYS_TOD_PROTECT(); - - return 0; -} - -/* - * m48_tod_set - */ - -static int to_bcd(int value) -{ - return value / 10 * 16 + value % 10; -} - -static int from_bcd(int value) -{ - return value / 16 * 10 + value % 16; -} - -static int day_of_week(int y, int m, int d) /* 0-6 ==> Sun-Sat */ -{ - static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4}; - y -= m < 3; - return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7; -} - -/* - * Note: the TOD should store the current GMT - */ - -int m48_tod_set(int year, /* 1980-2079 */ - int month, /* 01-12 */ - int day, /* 01-31 */ - int hour, /* 00-23 */ - int minute, /* 00-59 */ - int second) /* 00-59 */ - -{ - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] |= 0x80; /* Set WRITE bit */ - - M48_ADDR[YEAR] = to_bcd(year % 100); - M48_ADDR[MONTH] = to_bcd(month); - M48_ADDR[DAY] = to_bcd(day); - M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1; - M48_ADDR[HOUR] = to_bcd(hour); - M48_ADDR[MINUTE] = to_bcd(minute); - M48_ADDR[SECOND] = to_bcd(second); - - M48_ADDR[CONTROL] &= ~0x80; /* Clear WRITE bit */ - - SYS_TOD_PROTECT(); - - return 0; -} - -/* - * Note: the TOD should store the current GMT - */ - -int m48_tod_get(int *year, /* 1980-2079 */ - int *month, /* 01-12 */ - int *day, /* 01-31 */ - int *hour, /* 00-23 */ - int *minute, /* 00-59 */ - int *second) /* 00-59 */ -{ - int y; - - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] |= 0x40; /* Set READ bit */ - - y = from_bcd(M48_ADDR[YEAR]); - *year = y < 80 ? 2000 + y : 1900 + y; - *month = from_bcd(M48_ADDR[MONTH]); - *day = from_bcd(M48_ADDR[DAY]); - /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */ - *hour = from_bcd(M48_ADDR[HOUR]); - *minute = from_bcd(M48_ADDR[MINUTE]); - *second = from_bcd(M48_ADDR[SECOND] & 0x7f); - - M48_ADDR[CONTROL] &= ~0x40; /* Clear READ bit */ - - SYS_TOD_PROTECT(); - - return 0; -} - -int m48_tod_get_second(void) -{ - return from_bcd(M48_ADDR[SECOND] & 0x7f); -} - -/* - * Watchdog function - * - * If usec is 0, the watchdog timer is disarmed. - * - * If usec is non-zero, the watchdog timer is armed (or re-armed) for - * approximately usec microseconds (if the exact requested usec is - * not supported by the chip, the next higher available value is used). - * - * Minimum watchdog timeout = 62500 usec - * Maximum watchdog timeout = 124 sec (124000000 usec) - */ - -void m48_watchdog_arm(int usec) -{ - int mpy, res; - - SYS_TOD_UNPROTECT(); - - if (usec == 0) { - res = 0; - mpy = 0; - } else if (usec < 2000000) { /* Resolution: 1/16s if below 2s */ - res = 0; - mpy = (usec + 62499) / 62500; - } else if (usec < 8000000) { /* Resolution: 1/4s if below 8s */ - res = 1; - mpy = (usec + 249999) / 250000; - } else if (usec < 32000000) { /* Resolution: 1s if below 32s */ - res = 2; - mpy = (usec + 999999) / 1000000; - } else { /* Resolution: 4s up to 124s */ - res = 3; - mpy = (usec + 3999999) / 4000000; - if (mpy > 31) - mpy = 31; - } - - M48_ADDR[WATCH] = (0x80 | /* Steer to RST signal (IRQ = N/C) */ - mpy << 2 | - res); - - SYS_TOD_PROTECT(); -} - -/* - * U-Boot RTC support. - */ -int -rtc_get( struct rtc_time *tmp ) -{ - m48_tod_get(&tmp->tm_year, - &tmp->tm_mon, - &tmp->tm_mday, - &tmp->tm_hour, - &tmp->tm_min, - &tmp->tm_sec); - tmp->tm_yday = 0; - tmp->tm_isdst= 0; - -#ifdef RTC_DEBUG - printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec ); -#endif - - return 0; -} - -int rtc_set( struct rtc_time *tmp ) -{ - m48_tod_set(tmp->tm_year, /* 1980-2079 */ - tmp->tm_mon, /* 01-12 */ - tmp->tm_mday, /* 01-31 */ - tmp->tm_hour, /* 00-23 */ - tmp->tm_min, /* 00-59 */ - tmp->tm_sec); /* 00-59 */ - -#ifdef RTC_DEBUG - printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); -#endif - - return 0; -} - -void -rtc_reset (void) -{ - m48_tod_init(); -} diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c deleted file mode 100644 index be455bbefe..0000000000 --- a/board/bmw/ns16550.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * COM1 NS16550 support - * originally from linux source (arch/powerpc/boot/ns16550.c) - * modified to use CONFIG_SYS_ISA_MEM and new defines - */ - -#include -#include "ns16550.h" - -typedef struct NS16550 *NS16550_t; - -const NS16550_t COM_PORTS[] = - { (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500), -(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) }; - -volatile struct NS16550 *NS16550_init (int chan, int baud_divisor) -{ - volatile struct NS16550 *com_port; - - com_port = (struct NS16550 *) COM_PORTS[chan]; - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; /* Access baud rate */ - com_port->dll = baud_divisor & 0xff; /* 9600 baud */ - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */ - com_port->mcr = MCR_RTS; /* RTS/DTR */ - com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */ - return (com_port); -} - -void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor) -{ - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; /* Access baud rate */ - com_port->dll = baud_divisor & 0xff; /* 9600 baud */ - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */ - com_port->mcr = MCR_RTS; /* RTS/DTR */ - com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */ -} - -void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c) -{ - while ((com_port->lsr & LSR_THRE) == 0); - com_port->thr = c; -} - -unsigned char NS16550_getc (volatile struct NS16550 *com_port) -{ - while ((com_port->lsr & LSR_DR) == 0); - return (com_port->rbr); -} - -int NS16550_tstc (volatile struct NS16550 *com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h deleted file mode 100644 index 2087a4aabd..0000000000 --- a/board/bmw/ns16550.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * NS16550 Serial Port - * originally from linux source (arch/powerpc/boot/ns16550.h) - * modified slightly to - * have addresses as offsets from CONFIG_SYS_ISA_BASE - * added a few more definitions - * added prototypes for ns16550.c - * reduced no of com ports to 2 - * modifications (c) Rob Taylor, Flying Pig Systems. 2000. - * further modified to support the 8245 duart - * modifications (c) Paul Jimenez, Musenki, Inc. 2001. - */ - - -struct NS16550 { - unsigned char rbrthrdlb; /* 0 */ - unsigned char ierdmb; /* 1 */ - unsigned char iirfcrafr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ - unsigned char reserved[2]; /* 8 & 9 */ - unsigned char dsr; /* 10 */ - unsigned char dcr; /* 11 */ -}; - - -#define rbr rbrthrdlb -#define thr rbrthrdlb -#define dll rbrthrdlb -#define ier ierdmb -#define dlm ierdmb -#define iir iirfcrafr -#define fcr iirfcrafr -#define afr iirfcrafr - -#define FCR_FIFO_EN 0x01 /*fifo enable */ -#define FCR_RXSR 0x02 /*receiver soft reset */ -#define FCR_TXSR 0x04 /*transmitter soft reset */ -#define FCR_DMS 0x08 /* DMA Mode Select */ - -#define MCR_RTS 0x02 /* Readyu to Send */ -#define MCR_LOOP 0x10 /* Local loopback mode enable */ -/* #define MCR_DTR 0x01 noton 8245 duart */ -/* #define MCR_DMA_EN 0x04 noton 8245 duart */ -/* #define MCR_TX_DFR 0x08 noton 8245 duart */ - -#define LCR_WLS_MSK 0x03 /* character length slect mask */ -#define LCR_WLS_5 0x00 /* 5 bit character length */ -#define LCR_WLS_6 0x01 /* 6 bit character length */ -#define LCR_WLS_7 0x02 /* 7 bit character length */ -#define LCR_WLS_8 0x03 /* 8 bit character length */ -#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define LCR_PEN 0x08 /* Parity eneble */ -#define LCR_EPS 0x10 /* Even Parity Select */ -#define LCR_STKP 0x20 /* Stick Parity */ -#define LCR_SBRK 0x40 /* Set Break */ -#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */ - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -/* useful defaults for LCR*/ -#define LCR_8N1 0x03 - - -volatile struct NS16550 *NS16550_init (int chan, int baud_divisor); -void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c); -unsigned char NS16550_getc (volatile struct NS16550 *com_port); -int NS16550_tstc (volatile struct NS16550 *com_port); -void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor); diff --git a/board/bmw/serial.c b/board/bmw/serial.c deleted file mode 100644 index 08f449c864..0000000000 --- a/board/bmw/serial.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include "ns16550.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if CONFIG_CONS_INDEX == 1 -static struct NS16550 *console = - (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500); -#elif CONFIG_CONS_INDEX == 2 -static struct NS16550 *console = - (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500); -#else -#error no valid console defined -#endif - -extern ulong get_bus_freq (ulong); - -static int bmw_serial_init(void) -{ - int clock_divisor = gd->bus_clk / 16 / gd->baudrate; - - NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor); - - return (0); -} - -static void bmw_serial_putc(const char c) -{ - if (c == '\n') { - serial_putc ('\r'); - } - NS16550_putc (console, c); -} - -static void bmw_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - - -static int bmw_serial_getc(void) -{ - return NS16550_getc (console); -} - -static int bmw_serial_tstc(void) -{ - return NS16550_tstc (console); -} - -static void bmw_serial_setbrg(void) -{ - int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate; - - NS16550_reinit (console, clock_divisor); -} - -static struct serial_device bmw_serial_drv = { - .name = "bmw_serial", - .start = bmw_serial_init, - .stop = NULL, - .setbrg = bmw_serial_setbrg, - .putc = bmw_serial_putc, - .puts = bmw_serial_puts, - .getc = bmw_serial_getc, - .tstc = bmw_serial_tstc, -}; - -void bmw_serial_initialize(void) -{ - serial_register(&bmw_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &bmw_serial_drv; -} diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds index b9b8e3c727..b854c180c4 100644 --- a/board/c2mon/u-boot.lds +++ b/board/c2mon/u-boot.lds @@ -74,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/c2mon/u-boot.lds.debug +++ b/board/c2mon/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/cobra5272/u-boot.lds +++ b/board/cobra5272/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/cogent/serial.c b/board/cogent/serial.c index cd4a976f89..20631d162d 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -68,12 +68,6 @@ static void cogent_serial_putc(const char c) cma_mb_reg_write (&mbsp->ser_thr, c); } -static void cogent_serial_puts(const char *s) -{ - while (*s != '\0') - serial_putc (*s++); -} - static int cogent_serial_getc(void) { cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; @@ -96,7 +90,7 @@ static struct serial_device cogent_serial_drv = { .stop = NULL, .setbrg = cogent_serial_setbrg, .putc = cogent_serial_putc, - .puts = cogent_serial_puts, + .puts = default_serial_puts, .getc = cogent_serial_getc, .tstc = cogent_serial_tstc, }; diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index 2393d8d8af..2a6027f814 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/cogent/u-boot.lds.debug +++ b/board/cogent/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile index 5c6b78f704..ac1d17440f 100644 --- a/board/cpc45/Makefile +++ b/board/cpc45/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o plx9030.o pd67290.o +COBJS = $(BOARD).o flash.o plx9030.o pd67290.o ide.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index 1178822db3..22008066e6 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -260,21 +260,6 @@ int pcmcia_init(void) #endif -# ifdef CONFIG_IDE_LED -void ide_led (uchar led, uchar status) -{ - u_char val; - /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ - val = readb(BCSR_BASE + 0x04); - if (status) { /* led on */ - val |= B_CTRL_LED0; - } else { - val &= ~B_CTRL_LED0; - } - writeb(val, BCSR_BASE + 0x04); -} -# endif - int board_eth_init(bd_t *bis) { return pci_eth_init(bis); diff --git a/board/cpc45/ide.c b/board/cpc45/ide.c new file mode 100644 index 0000000000..03be59f974 --- /dev/null +++ b/board/cpc45/ide.c @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2001 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * (C) Copyright 2000-2011 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#define EIEIO __asm__ volatile ("eieio") +#define SYNC __asm__ volatile ("sync") + +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + uchar i; + volatile uchar *pbuf_even = + (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + volatile uchar *pbuf_odd = + (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + ushort *dbuf = (ushort *) sect_buf; + + while (words--) { + for (i = 0; i < 2; i++) { + *(((uchar *) (dbuf)) + 1) = *pbuf_even; + *(uchar *) dbuf = *pbuf_odd; + dbuf += 1; + } + } +} + +void ide_input_data(int dev, ulong *sect_buf, int words) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (words--) { + *dbuf++ = *pbuf_even; + EIEIO; + SYNC; + *dbuf++ = *pbuf_odd; + EIEIO; + SYNC; + *dbuf++ = *pbuf_even; + EIEIO; + SYNC; + *dbuf++ = *pbuf_odd; + EIEIO; + SYNC; + } +} + +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (shorts--) { + EIEIO; + *dbuf++ = *pbuf_even; + EIEIO; + *dbuf++ = *pbuf_odd; + } +} + +void ide_output_data(int dev, const ulong *sect_buf, int words) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (words--) { + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + } +} + +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (shorts--) { + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + } +} + +void ide_led(uchar led, uchar status) +{ + u_char val; + /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ + val = readb(BCSR_BASE + 0x04); + if (status) /* led on */ + val |= B_CTRL_LED0; + else + val &= ~B_CTRL_LED0; + + writeb(val, BCSR_BASE + 0x04); +} + diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug index fcf8ebbf8e..d7a2e56008 100644 --- a/board/cray/L1/u-boot.lds.debug +++ b/board/cray/L1/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 3b10114354..8a306d6076 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -74,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 6f6e065a9f..c5fd93c0f7 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -47,6 +47,12 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + .u_boot_list : { + #include + } >.sram + . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index b3a41afc42..86dc172ee2 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -57,6 +57,11 @@ SECTIONS *(.data.rel.ro) } + . = ALIGN(4); + .u_boot_list : { + #include + } + . = ALIGN(4); __rel_dyn_start = .; __rel_dyn_end = .; diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds index 4a59cea80f..8a871cff49 100644 --- a/board/dbau1x00/u-boot.lds +++ b/board/dbau1x00/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include } uboot_end_data = .; diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 01ec39008d..1bd1700aa2 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds index fb06648663..22626d392a 100644 --- a/board/emk/top860/u-boot.lds +++ b/board/emk/top860/u-boot.lds @@ -67,9 +67,11 @@ SECTIONS . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds index 332b35a57d..1dcc22a191 100644 --- a/board/ep88x/u-boot.lds +++ b/board/ep88x/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index aa001df0b8..4ef10e7d72 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -30,7 +30,6 @@ #include #include -extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS]; int cpci_hd_type; int ata_device(int dev) diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index 25f8950e9a..160e0e0ae0 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -75,21 +75,13 @@ static void cpci750_serial_setbrg(void) galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } - -static void cpci750_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device cpci750_serial_drv = { .name = "cpci750_serial", .start = cpci750_serial_init, .stop = NULL, .setbrg = cpci750_serial_setbrg, .putc = cpci750_serial_putc, - .puts = cpci750_serial_puts, + .puts = default_serial_puts, .getc = cpci750_serial_getc, .tstc = cpci750_serial_tstc, }; diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds index b15948d34c..7eca18390b 100644 --- a/board/esd/dasa_sim/u-boot.lds +++ b/board/esd/dasa_sim/u-boot.lds @@ -73,9 +73,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds index 71f0fd2c3e..ca7df4592e 100644 --- a/board/esd/pmc440/u-boot-nand.lds +++ b/board/esd/pmc440/u-boot-nand.lds @@ -102,10 +102,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds index f697ccd515..0d6a0f3a3b 100644 --- a/board/esd/tasreg/u-boot.lds +++ b/board/esd/tasreg/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 163b83d819..69f15000db 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds index 8465937d10..56c3470bde 100644 --- a/board/etx094/u-boot.lds +++ b/board/etx094/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index 9fd429864a..b9ca1d760c 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -139,20 +139,13 @@ static void evb64260_serial_setbrg(void) #endif /* CONFIG_MPSC */ -static void evb64260_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device evb64260_serial_drv = { .name = "evb64260_serial", .start = evb64260_serial_init, .stop = NULL, .setbrg = evb64260_serial_setbrg, .putc = evb64260_serial_putc, - .puts = evb64260_serial_puts, + .puts = default_serial_puts, .getc = evb64260_serial_getc, .tstc = evb64260_serial_tstc, }; diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds index 2d031efc4e..eac9c070e3 100644 --- a/board/evb64260/u-boot.lds +++ b/board/evb64260/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds index 9ea0674b88..6022dbce72 100644 --- a/board/fads/u-boot.lds +++ b/board/fads/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/flagadm/u-boot.lds +++ b/board/flagadm/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/flagadm/u-boot.lds.debug +++ b/board/flagadm/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 54cb098a91..36f7c4f30f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o +COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 6cd7e5108a..c92902a92e 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -32,22 +32,22 @@ void qixis_write(unsigned int reg, u8 value) void qixis_reset(void) { - QIXIS_WRITE(rst_ctl, 0x83); + QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); } void qixis_bank_reset(void) { - QIXIS_WRITE(rcfg_ctl, 0x20); - QIXIS_WRITE(rcfg_ctl, 0x21); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START); } -/* Set the boot bank to the power-on default bank0 */ +/* Set the boot bank to the power-on default bank */ void clear_altbank(void) { u8 reg; reg = QIXIS_READ(brdcfg[0]); - reg = reg & ~QIXIS_LBMAP_MASK; + reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK; QIXIS_WRITE(brdcfg[0], reg); } @@ -85,11 +85,11 @@ static void qixis_dump_regs(void) printf("ctl_sys = %02x\n", QIXIS_READ(ctl_sys)); printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl)); printf("present = %02x\n", QIXIS_READ(present)); + printf("present2 = %02x\n", QIXIS_READ(present2)); printf("clk_spd = %02x\n", QIXIS_READ(clk_spd)); printf("stat_dut = %02x\n", QIXIS_READ(stat_dut)); printf("stat_sys = %02x\n", QIXIS_READ(stat_sys)); printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm)); - printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2)); } #endif @@ -115,7 +115,8 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) for (i = 0; i < ARRAY_SIZE(period); i++) { if (strcmp(argv[2], period[i]) == 0) { /* disable watchdog */ - QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08); + QIXIS_WRITE(rcfg_ctl, + rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE); QIXIS_WRITE(watch, ((i<<2) - 1)); QIXIS_WRITE(rcfg_ctl, rcfg); return 0; diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index 7a0268a02c..b98b180655 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -26,7 +26,7 @@ struct qixis { u8 stat_sys; u8 stat_alrm; u8 present; - u8 ctl_sys2; + u8 present2; /* Presence Status Register 2,0x0c */ u8 rcw_ctl; u8 ctl_led; u8 i2cblk; @@ -86,12 +86,6 @@ struct qixis { u8 res15[16]; }; -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 7 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_ALTBANK 0x04 - u8 qixis_read(unsigned int reg); void qixis_write(unsigned int reg, u8 value); diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c new file mode 100644 index 0000000000..786856597f --- /dev/null +++ b/board/freescale/common/vsc3316_3308.c @@ -0,0 +1,184 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "vsc3316_3308.h" + +#define REVISION_ID_REG 0x7E +#define INTERFACE_MODE_REG 0x79 +#define CURRENT_PAGE_REGISTER 0x7F +#define CONNECTION_CONFIG_PAGE 0x00 +#define INPUT_STATE_REG 0x13 +#define GLOBAL_INPUT_ISE1 0x51 +#define GLOBAL_INPUT_ISE2 0x52 +#define GLOBAL_INPUT_LOS 0x55 +#define GLOBAL_CORE_CNTRL 0x5D +#define OUTPUT_MODE_PAGE 0x23 +#define CORE_CONTROL_PAGE 0x25 +#define CORE_CONFIG_REG 0x75 + +int vsc_if_enable(unsigned int vsc_addr) +{ + u8 data; + + debug("VSC:Configuring VSC at I2C address 0x%2x" + " for 2-wire interface\n", vsc_addr); + + /* enable 2-wire Serial InterFace (I2C) */ + data = 0x02; + return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1); +} + +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3316 at I2C address 0x%2x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Configuring the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0x80); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3308 at I2C address 0x%x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /*Configure Global Input ISE and gain */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12); + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Turning ON the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +void vsc_wp_config(unsigned int vsc_addr) +{ + debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr); + + /* For new crosspoint configuration to occur, WP bit of + * CORE_CONFIG_REG should be set 1 and then reset to 0 */ + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01); + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0); +} diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h new file mode 100644 index 0000000000..effd66dce4 --- /dev/null +++ b/board/freescale/common/vsc3316_3308.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VSC_CROSSBAR_H_ +#define __VSC_CROSSBAR_H 1_ + +#include +#include +#include + +int vsc_if_enable(unsigned int vsc_addr); +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +void vsc_wp_config(unsigned int vsc_addr); + +#endif /* __VSC_CROSSBAR_H_ */ diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds index 6e39be169a..2c151f20f5 100644 --- a/board/freescale/m5208evbe/u-boot.lds +++ b/board/freescale/m5208evbe/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds index 3e9f4c3460..dbd6f6ab20 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds index d39e7348b3..00932ae68d 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m5235evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5249evb/u-boot.lds +++ b/board/freescale/m5249evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds index cbd28312a0..f8116f601e 100644 --- a/board/freescale/m5253demo/u-boot.lds +++ b/board/freescale/m5253demo/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5253evbe/u-boot.lds +++ b/board/freescale/m5253evbe/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds index 4717036d50..133ec01036 100644 --- a/board/freescale/m5271evb/u-boot.lds +++ b/board/freescale/m5271evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5272c3/u-boot.lds +++ b/board/freescale/m5272c3/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds index 6c2dfe8ec4..fc68de1ba1 100644 --- a/board/freescale/m5275evb/u-boot.lds +++ b/board/freescale/m5275evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds index 4ba1964f7e..ad49874c5a 100644 --- a/board/freescale/m5282evb/u-boot.lds +++ b/board/freescale/m5282evb/u-boot.lds @@ -29,6 +29,9 @@ SECTIONS { arch/m68k/cpu/mcf52x2/start.o (.text*) + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text*) + *(.text*) } _etext = .; @@ -65,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index 80935f28bf..d25a36f651 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds index 40af8bc23c..6616594e7b 100644 --- a/board/freescale/m5329evb/u-boot.lds +++ b/board/freescale/m5329evb/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds index 19342ac214..bc40fd649d 100644 --- a/board/freescale/m5373evb/u-boot.lds +++ b/board/freescale/m5373evb/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/bmw/Makefile b/board/freescale/m54418twr/Makefile similarity index 75% rename from board/bmw/Makefile rename to board/freescale/m54418twr/Makefile index 4f88efafd4..1e53f48f5d 100644 --- a/board/bmw/Makefile +++ b/board/freescale/m54418twr/Makefile @@ -1,10 +1,5 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2002 -# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2010-2012 Freescale Semiconductor, Inc. +# TsiChung Liew (Tsi-Chung.Liew@freescale.com) # # See file CREDITS for list of people who contributed to this # project. @@ -29,16 +24,14 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o - -SOBJS = early_init.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/board/bmw/config.mk b/board/freescale/m54418twr/config.mk similarity index 73% rename from board/bmw/config.mk rename to board/freescale/m54418twr/config.mk index a1a44e5811..a592335861 100644 --- a/board/bmw/config.mk +++ b/board/freescale/m54418twr/config.mk @@ -1,6 +1,5 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2010-2012 Freescale Semiconductor, Inc. +# TsiChung Liew (Tsi-Chung.Liew@freescale.com) # # See file CREDITS for list of people who contributed to this # project. @@ -21,10 +20,6 @@ # MA 02111-1307 USA # -# -# BMW board -# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -# NOTE: The flags below affect how the BCM570x driver is compiled -PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\ - -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256 +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/m54418twr/m54418twr.c b/board/freescale/m54418twr/m54418twr.c new file mode 100644 index 0000000000..6e57bef896 --- /dev/null +++ b/board/freescale/m54418twr/m54418twr.c @@ -0,0 +1,129 @@ +/* + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + /* + * need to to: + * Check serial flash size. if 2mb evb, else 8mb demo + */ + puts("Board: "); + puts("Freescale MCF54418 Tower System\n"); + return 0; +}; + +phys_size_t initdram(int board_type) +{ + u32 dramsize; + +#if defined(CONFIG_SERIAL_BOOT) + /* + * Serial Boot: The dram is already initialized in start.S + * only require to return DRAM size + */ + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; +#else + sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); + ccm_t *ccm = (ccm_t *)MMAP_CCM; + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + pm_t *pm = (pm_t *) MMAP_PM; + u32 i; + + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + + out_8(&pm->pmcr0, 0x2E); + out_8(&gpio->mscr_sdram, 1); + + clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF); + setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK); + + out_be32(&sdram->rcrcr, 0x40000000); + out_be32(&sdram->padcr, 0x01030203); + + out_be32(&sdram->cr00, 0x01010101); + out_be32(&sdram->cr01, 0x00000101); + out_be32(&sdram->cr02, 0x01010100); + out_be32(&sdram->cr03, 0x01010000); + out_be32(&sdram->cr04, 0x00010101); + out_be32(&sdram->cr06, 0x00010100); + out_be32(&sdram->cr07, 0x00000001); + out_be32(&sdram->cr08, 0x01000001); + out_be32(&sdram->cr09, 0x00000100); + out_be32(&sdram->cr10, 0x00010001); + out_be32(&sdram->cr11, 0x00000200); + out_be32(&sdram->cr12, 0x01000002); + out_be32(&sdram->cr13, 0x00000000); + out_be32(&sdram->cr14, 0x00000100); + out_be32(&sdram->cr15, 0x02000100); + out_be32(&sdram->cr16, 0x02000407); + out_be32(&sdram->cr17, 0x02030007); + out_be32(&sdram->cr18, 0x02000100); + out_be32(&sdram->cr19, 0x0A030203); + out_be32(&sdram->cr20, 0x00020708); + out_be32(&sdram->cr21, 0x00050008); + out_be32(&sdram->cr22, 0x04030002); + out_be32(&sdram->cr23, 0x00000004); + out_be32(&sdram->cr24, 0x020A0000); + out_be32(&sdram->cr25, 0x0C00000E); + out_be32(&sdram->cr26, 0x00002004); + out_be32(&sdram->cr28, 0x00100010); + out_be32(&sdram->cr29, 0x00100010); + out_be32(&sdram->cr31, 0x07990000); + out_be32(&sdram->cr40, 0x00000000); + out_be32(&sdram->cr41, 0x00C80064); + out_be32(&sdram->cr42, 0x44520002); + out_be32(&sdram->cr43, 0x00C80023); + out_be32(&sdram->cr45, 0x0000C350); + out_be32(&sdram->cr56, 0x04000000); + out_be32(&sdram->cr57, 0x03000304); + out_be32(&sdram->cr58, 0x40040000); + out_be32(&sdram->cr59, 0xC0004004); + out_be32(&sdram->cr60, 0x0642C000); + out_be32(&sdram->cr61, 0x00000642); + asm("tpf"); + + out_be32(&sdram->cr09, 0x01000100); + + udelay(100); +#endif + return dramsize; +}; + +int testdram(void) +{ + return 0; +} diff --git a/board/freescale/m54418twr/u-boot.lds b/board/freescale/m54418twr/u-boot.lds new file mode 100644 index 0000000000..f341449346 --- /dev/null +++ b/board/freescale/m54418twr/u-boot.lds @@ -0,0 +1,97 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .text : + { + arch/m68k/cpu/mcf5445x/start.o (.text*) + + *(.text*) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + KEEP(*(.got)) + __got_end = .; + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data*) + *(.sdata*) + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + _sbss = .; + *(.bss*) + *(.sbss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + __bss_end__ = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds index 45924b7514..91328a4af6 100644 --- a/board/freescale/m54451evb/u-boot.lds +++ b/board/freescale/m54451evb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds index f341449346..36a4c264b9 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m54455evb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds index 5472689b5b..de4d0eb907 100644 --- a/board/freescale/m547xevb/u-boot.lds +++ b/board/freescale/m547xevb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds index cf3f38c0f3..fbbe0c5dc5 100644 --- a/board/freescale/m548xevb/u-boot.lds +++ b/board/freescale/m548xevb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 79eb7aca38..29ad0e6e79 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -57,9 +57,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/board/sbc8560/Makefile b/board/freescale/t4qds/Makefile similarity index 81% rename from board/sbc8560/Makefile rename to board/freescale/t4qds/Makefile index ce0156040a..ff09ffa51e 100644 --- a/board/sbc8560/Makefile +++ b/board/freescale/t4qds/Makefile @@ -1,9 +1,5 @@ # -# (C) Copyright 2004-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2004 Wind River Systems Inc . -# Added support for Wind River SBC8560 board +# Copyright 2012 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -15,7 +11,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -29,9 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-$(CONFIG_T4240QDS)+= eth.o +COBJS-$(CONFIG_PCI) += pci.o COBJS-y += law.o COBJS-y += tlb.o -COBJS-$(CONFIG_FSL_DDR1) += ddr.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) @@ -40,6 +38,12 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + ######################################################################### # defines $(obj).depend target diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c new file mode 100644 index 0000000000..692616aed4 --- /dev/null +++ b/board/freescale/t4qds/ddr.c @@ -0,0 +1,186 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 or later as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * This table contains all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp->force_2T; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found " + "for data rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp_highest->force_2T; + } else { + panic("DIMM is not supported by this board"); + } +found: + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c new file mode 100644 index 0000000000..a49c7d4f15 --- /dev/null +++ b/board/freescale/t4qds/eth.c @@ -0,0 +1,495 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../common/qixis.h" +#include "../common/fman.h" + +#include "t4240qds_qixis.h" + +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII 0 +#define EMI1_SLOT1 1 +#define EMI1_SLOT2 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT7 7 +#define EMI2 8 /* tmp, FIXME */ +/* Slot6 and Slot8 do not have EMI connections */ + +static int mdio_mux[NUM_FM_PORTS]; + +static const char *mdio_names[] = { + "T4240QDS_MDIO0", + "T4240QDS_MDIO1", + "T4240QDS_MDIO2", + "T4240QDS_MDIO3", + "T4240QDS_MDIO4", + "T4240QDS_MDIO5", + "NULL", + "T4240QDS_MDIO7", + "T4240QDS_10GC", +}; + +static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; +static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; + +static const char *t4240qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t4240qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct t4240qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void t4240qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if ((muxval < 6) || (muxval == 7)) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t4240qds_mdio_reset(struct mii_dev *bus) +{ + struct t4240qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t4240qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t4240qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate T4240QDS MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate T4240QDS private data\n"); + free(bus); + return -1; + } + + bus->read = t4240qds_mdio_read; + bus->write = t4240qds_mdio_write; + bus->reset = t4240qds_mdio_reset; + sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, + enum fm_port port, int offset) +{ + if (mdio_mux[port] == EMI1_RGMII) + fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); + + /* TODO: will do with dts */ +} + +void fdt_fixup_board_enet(void *fdt) +{ + /* TODO: will do with dts */ +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + + switch (srds_prtcl_s1) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + } + break; + case 38: + fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + QSGMII_CARD_PHY_ADDR); + } + break; + case 40: + case 46: + case 48: + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + } + fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + default: + puts("Invalid SerDes1 protocol for T4240QDS\n"); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* FM1 DTSEC5 routes to RGMII with EC2 */ + debug("FM1@DTSEC%u is RGMII at address %u\n", + idx + 1, 2); + if (i == FM1_DTSEC5) + fm_info_set_phy_address(i, 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + +#if (CONFIG_SYS_NUM_FMAN == 2) + switch (srds_prtcl_s2) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); + break; + case 7: + case 13: + case 14: + case 16: + case 22: + case 23: + case 25: + case 26: + /* XAUI/HiGig in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + break; + case 38: + /* QSGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR); + break; + case 40: + case 46: + case 48: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + /* QSGMII in Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 50: + case 52: + case 54: + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 56: + case 57: + /* XFI in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + default: + puts("Invalid SerDes2 protocol for T4240QDS\n"); + break; + } + + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_2, + SGMII_FM2_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 3: + mdio_mux[i] = EMI1_SLOT3; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * If DTSEC5 is RGMII, then it's routed via via EC1 to + * the first on-board RGMII port. If DTSEC6 is RGMII, + * then it's routed via via EC2 to the second on-board + * RGMII port. + */ + debug("FM2@DTSEC%u is RGMII at address %u\n", + idx + 1, i == FM2_DTSEC5 ? 1 : 2); + fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } +#endif /* CONFIG_SYS_NUM_FMAN */ + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c new file mode 100644 index 0000000000..5debcf612a --- /dev/null +++ b/board/freescale/t4qds/law.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t4qds/pci.c b/board/freescale/t4qds/pci.c new file mode 100644 index 0000000000..fc00b4ad6d --- /dev/null +++ b/board/freescale/t4qds/pci.c @@ -0,0 +1,39 @@ +/* + * Copyright 2007-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h new file mode 100644 index 0000000000..efb718d2c3 --- /dev/null +++ b/board/freescale/t4qds/t4240qds_qixis.h @@ -0,0 +1,56 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __T4020QDS_QIXIS_H__ +#define __T4020QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T4020QDS */ + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +#define BRDCFG5_RESET 0x00 + +#define BRDCFG12_SD3EN_MASK 0x20 +#define BRDCFG12_SD3MX_MASK 0x08 +#define BRDCFG12_SD3MX_SLOT5 0x08 +#define BRDCFG12_SD3MX_SLOT6 0x00 +#define BRDCFG12_SD4EN_MASK 0x04 +#define BRDCFG12_SD4MX_MASK 0x03 +#define BRDCFG12_SD4MX_SLOT7 0x02 +#define BRDCFG12_SD4MX_SLOT8 0x01 +#define BRDCFG12_SD4MX_AURO_SATA 0x00 +#endif diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c new file mode 100644 index 0000000000..88b8cedf48 --- /dev/null +++ b/board/freescale/t4qds/t4qds.c @@ -0,0 +1,395 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/qixis.h" +#include "../common/vsc3316_3308.h" +#include "t4qds.h" +#include "t4240qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + unsigned int i; + + printf("Board: %sQDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + static const char *freq[] = { + "100", "125", "156.25", "161.1328125"}; + unsigned int clock = (sw >> (2 * i)) & 3; + + printf("SERDES%u=%sMHz ", i+1, freq[clock]); + } + puts("\n"); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +/* Configure Crossbar switches for Front-Side SerDes Ports */ +int config_frontside_crossbar_vsc3316(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + int ret; + + ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS); + if (ret) + return ret; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + if (srds_prtcl_s1) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8); + if (ret) + return ret; + } + + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + if (srds_prtcl_s2) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8); + if (ret) + return ret; + } + + return 0; +} + +int config_backside_crossbar_mux(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s3, srds_prtcl_s4; + u8 brdcfg; + + srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + switch (srds_prtcl_s3) { + case 0: + /* SerDes3 is not enabled */ + break; + case 2: + case 9: + case 10: + /* SD3(0:7) => SLOT5(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT5; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + case 12: + case 14: + case 16: + case 17: + case 19: + case 20: + /* SD3(4:7) => SLOT6(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT6; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes3 Protocol %d\n", + srds_prtcl_s3); + return -1; + } + + srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + switch (srds_prtcl_s4) { + case 0: + /* SerDes4 is not enabled */ + break; + case 2: + /* 10b, SD4(0:7) => SLOT7(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT7; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + /* x1b, SD4(4:7) => SLOT8(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT8; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 10: + case 12: + case 14: + case 16: + case 18: + /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_AURO_SATA; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes4 Protocol %d\n", + srds_prtcl_s4); + return -1; + } + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + /* Disable remote I2C connectoin */ + QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET); + + /* Configure board SERDES ports crossbar */ + config_frontside_crossbar_vsc3316(); + config_backside_crossbar_mux(); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + case SRDS_PLLCR0_RFCK_SEL_161_13: + return "161.1328125"; + default: + return "???"; + } +} + +int misc_init_r(void) +{ + u8 sw; + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[MAX_SERDES]; + unsigned int i; + + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + unsigned int clock = (sw >> (2 * i)) & 3; + switch (clock) { + case 0: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + case 3: + actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13; + break; + } + } + + for (i = 0; i < MAX_SERDES; i++) { + u32 pllcr0 = srds_regs->bank[i].pllcr0; + u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES%u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h new file mode 100644 index 0000000000..c6a3492cb6 --- /dev/null +++ b/board/freescale/t4qds/t4qds.h @@ -0,0 +1,37 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CORENET_DS_H__ +#define __CORENET_DS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, + {8, 8}, {9, 9}, {14, 14}, {15, 15} }; + +static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, + {10, 10}, {11, 11}, {12, 12}, {13, 13} }; + +static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, + {10, 11}, {11, 10}, {12, 2}, {13, 3} }; + +static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, + {8, 9}, {9, 8}, {14, 1}, {15, 0} }; +#endif diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c new file mode 100644 index 0000000000..078a6e415c --- /dev/null +++ b/board/freescale/t4qds/tlb.c @@ -0,0 +1,136 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_1M, 1), +#endif + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds index 87cb8e32ba..774c494f03 100644 --- a/board/gaisler/gr_cpci_ax2000/u-boot.lds +++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } .data : { diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds index 2fb44aa832..f6d13014f3 100644 --- a/board/gaisler/gr_ep2s60/u-boot.lds +++ b/board/gaisler/gr_ep2s60/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } .data : { diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds index 8719e97ee4..7df6e83392 100644 --- a/board/gaisler/gr_xc3s_1500/u-boot.lds +++ b/board/gaisler/gr_xc3s_1500/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } .data : { diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds index 33890b504d..b241cbc1d0 100644 --- a/board/gaisler/grsim/u-boot.lds +++ b/board/gaisler/grsim/u-boot.lds @@ -84,10 +84,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } .data : { diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds index cf6e5020ba..63c15b9117 100644 --- a/board/gaisler/grsim_leon2/u-boot.lds +++ b/board/gaisler/grsim_leon2/u-boot.lds @@ -84,10 +84,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } .data : { diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds index 5bb6c62d71..1cbe7e32ba 100644 --- a/board/gen860t/u-boot-flashenv.lds +++ b/board/gen860t/u-boot-flashenv.lds @@ -71,9 +71,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds index be99b51208..dd89c70f56 100644 --- a/board/gen860t/u-boot.lds +++ b/board/gen860t/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index 1d66a9b2bd..124b183516 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -80,9 +80,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug index cfa4ef3f87..e1cf249650 100644 --- a/board/genietv/u-boot.lds.debug +++ b/board/genietv/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index ca9711575d..f02eb1c2aa 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -72,9 +72,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug index 8a197deef7..e84cc7991e 100644 --- a/board/hermes/u-boot.lds.debug +++ b/board/hermes/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index 1309f209de..7afae0a625 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -110,9 +110,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/hymod/u-boot.lds.debug +++ b/board/hymod/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds index 93c79a64b4..6778eb13ad 100644 --- a/board/icu862/u-boot.lds +++ b/board/icu862/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug index 91d3e67e82..3e075a85bd 100644 --- a/board/icu862/u-boot.lds.debug +++ b/board/icu862/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds index f697ccd515..0d6a0f3a3b 100644 --- a/board/idmr/u-boot.lds +++ b/board/idmr/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds index 4a59cea80f..8a871cff49 100644 --- a/board/incaip/u-boot.lds +++ b/board/incaip/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include } uboot_end_data = .; diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/ip860/u-boot.lds +++ b/board/ip860/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug index 2f61b11d81..e47aff0fa7 100644 --- a/board/ip860/u-boot.lds.debug +++ b/board/ip860/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c index 71d64d434f..ab294794bd 100644 --- a/board/ivm/ivm.c +++ b/board/ivm/ivm.c @@ -333,13 +333,59 @@ void show_boot_progress (int status) void ide_set_reset (int on) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + int i; /* * Configure PC for IDE Reset Pin */ if (on) { /* assert RESET */ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); + +#ifdef CONFIG_SYS_PB_12V_ENABLE + /* 12V Enable output OFF */ + immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE); + + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE); + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE); + immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE; + + /* wait 500 ms for the voltage to stabilize */ + for (i = 0; i < 500; ++i) + udelay(1000); +#endif /* CONFIG_SYS_PB_12V_ENABLE */ } else { /* release RESET */ +#ifdef CONFIG_SYS_PB_12V_ENABLE + /* 12V Enable output ON */ + immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE; +#endif /* CONFIG_SYS_PB_12V_ENABLE */ + +#ifdef CONFIG_SYS_PB_IDE_MOTOR + /* configure IDE Motor voltage monitor pin as input */ + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR); + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR); + immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR); + +/* wait up to 1 s for the motor voltage to stabilize */ + for (i = 0; i < 1000; ++i) { + if ((immr->im_cpm.cp_pbdat + & CONFIG_SYS_PB_IDE_MOTOR) != 0) + break; + udelay(1000); + } + + if (i == 1000) { /* Timeout */ + printf("\nWarning: 5V for IDE Motor missing\n"); +#ifdef CONFIG_STATUS_LED +#ifdef STATUS_LED_YELLOW + status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON); +#endif +#ifdef STATUS_LED_GREEN + status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF); +#endif +#endif /* CONFIG_STATUS_LED */ + } +#endif /* CONFIG_SYS_PB_IDE_MOTOR */ + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; } diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds index 1e843eb24e..4cca652748 100644 --- a/board/ivm/u-boot.lds +++ b/board/ivm/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug index 732a46f272..53a19b2947 100644 --- a/board/ivm/u-boot.lds.debug +++ b/board/ivm/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index e01a633aae..83a8753e5a 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -56,7 +56,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 2, 1, 0, 1}, /* UART2_RTS */ {5, 3, 2, 0, 2}, /* UART2_SIN */ {5, 1, 2, 0, 3}, /* UART2_CTS */ -#else +#elif !defined(CONFIG_MPC8309) /* Local Bus */ {0, 16, 1, 0, 3}, /* LA00 */ {0, 17, 1, 0, 3}, /* LA01 */ diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9g.c index 525c97aea6..54f25e097c 100644 --- a/board/kmc/kzm9g/kzm9g.c +++ b/board/kmc/kzm9g/kzm9g.c @@ -43,6 +43,7 @@ DECLARE_GLOBAL_DATA_PTR; #define SMSTPCR1_CMT0 (1 << 24) #define SMSTPCR1_I2C0 (1 << 16) #define SMSTPCR3_USB (1 << 22) +#define SMSTPCR3_I2C1 (1 << 23) #define PORT32CR (0xE6051020) #define PORT33CR (0xE6051021) @@ -287,8 +288,8 @@ int board_early_init_f(void) clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0)); clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0)); - clrbits_le32(&cpg->smstpcr3, SMSTPCR3_USB); - clrbits_le32(&cpg_srcr->srcr3, SMSTPCR3_USB); + clrbits_le32(&cpg->smstpcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1)); + clrbits_le32(&cpg_srcr->srcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1)); writel(VCLKCR1_D, &cpg->vclkcr1); /* Setup SCIF4 / workaround */ @@ -343,6 +344,8 @@ int board_init(void) gpio_direction_output(GPIO_PORT15, 1); /* I2C */ + gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL); + gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL); gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds index 6a017e305c..033cff42d9 100644 --- a/board/korat/u-boot-F7FC.lds +++ b/board/korat/u-boot-F7FC.lds @@ -108,10 +108,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/kup/kup4k/u-boot.lds +++ b/board/kup/kup4k/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/kup/kup4k/u-boot.lds.debug +++ b/board/kup/kup4k/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/kup/kup4x/u-boot.lds +++ b/board/kup/kup4x/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/kup/kup4x/u-boot.lds.debug +++ b/board/kup/kup4x/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds index de0b355a62..94118024bd 100644 --- a/board/lantec/u-boot.lds +++ b/board/lantec/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug index 856a99b6f9..e788f5c170 100644 --- a/board/lantec/u-boot.lds.debug +++ b/board/lantec/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c index f3e3fce824..541c958fca 100644 --- a/board/linkstation/ide.c +++ b/board/linkstation/ide.c @@ -37,7 +37,6 @@ #define IT8212_PCI_IdeBusSkewCONTROL 0x4c #define IT8212_PCI_IdeDrivingCURRENT 0x42 -extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS]; extern struct pci_controller hose; int ide_preinit (void) diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index 3527b381df..ef2cc24aae 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -29,6 +29,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -56,6 +57,14 @@ int board_init (void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int board_late_init(void) { setenv("stdout", "serial"); diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds index 8bf7324f37..bc71b0d2c1 100644 --- a/board/lwmon/u-boot.lds +++ b/board/lwmon/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug index 241223481b..0a3e6466a9 100644 --- a/board/lwmon/u-boot.lds.debug +++ b/board/lwmon/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds index 731cec9af7..e32ae37ea4 100644 --- a/board/manroland/uc100/u-boot.lds +++ b/board/manroland/uc100/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index 57c37deb89..5a3a9eabbf 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -74,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/mbx8xx/u-boot.lds +++ b/board/mbx8xx/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug index a95c47feac..4155b604fb 100644 --- a/board/mbx8xx/u-boot.lds.debug +++ b/board/mbx8xx/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/micronas/vct/u-boot.lds b/board/micronas/vct/u-boot.lds index 3a05ef9049..2ce8d0e158 100644 --- a/board/micronas/vct/u-boot.lds +++ b/board/micronas/vct/u-boot.lds @@ -53,10 +53,8 @@ SECTIONS .sdata : { *(.sdata*) } . = ALIGN(4); - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + .u_boot_list : { + #include } . = ALIGN(4); diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index dae2cfc7da..43f91f1a3c 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram index b3364be48c..5255651347 100644 --- a/board/mousse/u-boot.lds.ram +++ b/board/mousse/u-boot.lds.ram @@ -85,9 +85,6 @@ SECTIONS } > ram */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; __start___ex_table = .; __ex_table : { *(__ex_table) } > ram diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom index b4b9e02e52..29a34fb9c5 100644 --- a/board/mousse/u-boot.lds.rom +++ b/board/mousse/u-boot.lds.rom @@ -102,9 +102,6 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; __start___ex_table = .; __ex_table : { *(__ex_table) } diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug index fcf8ebbf8e..d7a2e56008 100644 --- a/board/mpl/pip405/u-boot.lds.debug +++ b/board/mpl/pip405/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index 11624d21f5..c378564f6d 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netphone/u-boot.lds +++ b/board/netphone/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netphone/u-boot.lds.debug +++ b/board/netphone/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netta/u-boot.lds +++ b/board/netta/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netta/u-boot.lds.debug +++ b/board/netta/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netta2/u-boot.lds +++ b/board/netta2/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netta2/u-boot.lds.debug +++ b/board/netta2/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netvia/u-boot.lds +++ b/board/netvia/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug index 6c7d698c95..6cbf4dc66e 100644 --- a/board/netvia/u-boot.lds.debug +++ b/board/netvia/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/nx823/u-boot.lds +++ b/board/nx823/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/nx823/u-boot.lds.debug +++ b/board/nx823/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds index 1aed197bb9..4cffacbd46 100644 --- a/board/openrisc/openrisc-generic/u-boot.lds +++ b/board/openrisc/openrisc-generic/u-boot.lds @@ -26,9 +26,11 @@ SECTIONS _endtext = .; } > ram - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } > ram - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } .rodata : { *(.rodata); diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c index b23eec805e..590ca414aa 100644 --- a/board/palmtc/palmtc.c +++ b/board/palmtc/palmtc.c @@ -24,6 +24,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -51,6 +52,14 @@ int board_init(void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int dram_init(void) { pxa2xx_dram_init(); diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds index bd0dee1efb..07ddd364a0 100644 --- a/board/pb1x00/u-boot.lds +++ b/board/pb1x00/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include } uboot_end_data = .; diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c index 5f89d9b125..de61ca0e56 100644 --- a/board/pcippc2/fpga_serial.c +++ b/board/pcippc2/fpga_serial.c @@ -73,13 +73,6 @@ void fpga_serial_putc (char c) } } -void fpga_serial_puts (const char *s) -{ - while (*s) { - fpga_serial_print (*s++); - } -} - int fpga_serial_getc (void) { while ((in8 (UART (LSR)) & 0x01) == 0); diff --git a/board/pcippc2/fpga_serial.h b/board/pcippc2/fpga_serial.h index 52750143c4..106fbf7a50 100644 --- a/board/pcippc2/fpga_serial.h +++ b/board/pcippc2/fpga_serial.h @@ -26,7 +26,6 @@ extern void fpga_serial_init (int); extern void fpga_serial_putc (char); -extern void fpga_serial_puts (const char *); extern int fpga_serial_getc (void); extern int fpga_serial_tstc (void); extern void fpga_serial_setbrg (void); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 4a91458e8e..5e6fc58cf7 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "hardware.h" #include "pcippc2.h" @@ -129,7 +130,7 @@ int misc_init_r (void) fpga_serial_init (sconsole_get_baudrate ()); sconsole_putc = fpga_serial_putc; - sconsole_puts = fpga_serial_puts; + sconsole_puts = default_serial_puts; sconsole_getc = fpga_serial_getc; sconsole_tstc = fpga_serial_tstc; sconsole_setbrg = fpga_serial_setbrg; diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 746a54c5e3..f8345ddb46 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -32,6 +32,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -672,7 +673,6 @@ U_BOOT_CMD( * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) * These values are shifted */ -extern ulong *ide_bus_offset; void inline ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", @@ -714,3 +714,58 @@ void ide_set_reset (int idereset) udelay (10000); } #endif /* defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + + +/* this is motly the same as it should, causing a little code duplication */ +#if defined(CONFIG_CMD_IDE) +#define EIEIO __asm__ volatile ("eieio") + +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + volatile ushort *pbuf = + (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + ushort *dbuf = (ushort *) sect_buf; + + debug("in input swap data base for read is %lx\n", + (unsigned long) pbuf); + + while (words--) { + *dbuf++ = *pbuf; + *dbuf++ = *pbuf; + } +} + +void ide_output_data(int dev, const ulong *sect_buf, int words) +{ + ushort *dbuf; + volatile ushort *pbuf; + + pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + dbuf = (ushort *) sect_buf; + while (words--) { + EIEIO; + *pbuf = ld_le16(dbuf++); + EIEIO; + *pbuf = ld_le16(dbuf++); + } +} + +void ide_input_data(int dev, ulong *sect_buf, int words) +{ + ushort *dbuf; + volatile ushort *pbuf; + + pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + dbuf = (ushort *) sect_buf; + + debug("in input data base for read is %lx\n", (unsigned long) pbuf); + + while (words--) { + EIEIO; + *dbuf++ = ld_le16(pbuf); + EIEIO; + *dbuf++ = ld_le16(pbuf); + } +} + +#endif diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c index 2f4d294b9d..3536933c00 100644 --- a/board/prodrive/p3mx/serial.c +++ b/board/prodrive/p3mx/serial.c @@ -75,21 +75,13 @@ static void p3mx_serial_setbrg(void) galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } - -static void p3mx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device p3mx_serial_drv = { .name = "p3mx_serial", .start = p3mx_serial_init, .stop = NULL, .setbrg = p3mx_serial_setbrg, .putc = p3mx_serial_putc, - .puts = p3mx_serial_puts, + .puts = default_serial_puts, .getc = p3mx_serial_getc, .tstc = p3mx_serial_tstc, }; diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index 877e8d9b2a..9931efdc08 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -35,6 +35,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -77,6 +78,14 @@ int board_init (void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int board_late_init(void) { setenv("stdout", "serial"); diff --git a/board/qemu-mips/config.mk b/board/qemu-mips/config.mk deleted file mode 100644 index 27cd34ac36..0000000000 --- a/board/qemu-mips/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# Qemu -M mips system emulator -# See http://fabrice.bellard.free.fr/qemu -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80001000 diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds index 9460b2010c..cb2356f731 100644 --- a/board/qemu-mips/u-boot.lds +++ b/board/qemu-mips/u-boot.lds @@ -24,7 +24,11 @@ /* OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") */ +#if defined(CONFIG_64BIT) +OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips") +#else OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") +#endif OUTPUT_ARCH(mips) ENTRY(_start) SECTIONS @@ -55,15 +59,17 @@ SECTIONS . = ALIGN(4); .sdata : { *(.sdata*) } - . = .; - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include } uboot_end_data = .; +#if defined(CONFIG_64BIT) + num_got_entries = (__got_end - __got_start) >> 3; +#else num_got_entries = (__got_end - __got_start) >> 2; +#endif . = ALIGN(4); .sbss : { *(.sbss*) } diff --git a/board/qi/qi_lb60/u-boot.lds b/board/qi/qi_lb60/u-boot.lds index 7317652569..b3cb869748 100644 --- a/board/qi/qi_lb60/u-boot.lds +++ b/board/qi/qi_lb60/u-boot.lds @@ -47,9 +47,11 @@ SECTIONS .sdata : { *(.sdata*) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } uboot_end_data = .; num_got_entries = (__got_end - __got_start) >> 2; diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/quantum/u-boot.lds +++ b/board/quantum/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds index 2fa085a3d9..3ef0d9e0b7 100644 --- a/board/r360mpi/u-boot.lds +++ b/board/r360mpi/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index d943fb6de7..a86b568f6e 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -77,9 +77,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; __start___ex_table = .; diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds index 38ebe88507..cf406ce966 100644 --- a/board/renesas/sh7757lcr/u-boot.lds +++ b/board/renesas/sh7757lcr/u-boot.lds @@ -77,13 +77,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index a729c52626..ff950294f3 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -97,9 +97,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds index d78dd77efd..951d8cec1d 100644 --- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds +++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds @@ -48,6 +48,11 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + #include + } >.sram + . = ALIGN(4); + /* Align .machine_param on 256 byte boundary for easier searching */ .machine_param ALIGN(0x100) : { *(.machine_param) } >.sram . = ALIGN(4); diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index f1628152d3..fbb442a02b 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -47,11 +47,13 @@ SECTIONS . = ALIGN(4); .got : { *(.got) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - . = ALIGN(4); + . = align(4); + .u_boot_list : { + #include + } + + . = align(4); .mmudata : { *(.mmudata) } . = ALIGN(4); diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug index 31746e3adc..7a0757f146 100644 --- a/board/sandburst/karef/u-boot.lds.debug +++ b/board/sandburst/karef/u-boot.lds.debug @@ -115,9 +115,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug index 4922bd241e..07bd6fe19f 100644 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ b/board/sandburst/metrobox/u-boot.lds.debug @@ -115,9 +115,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds index e382fd1a1e..ae3afa1130 100644 --- a/board/sandpoint/u-boot.lds +++ b/board/sandpoint/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/sbc8560/README b/board/sbc8560/README deleted file mode 100644 index c4b642236e..0000000000 --- a/board/sbc8560/README +++ /dev/null @@ -1,57 +0,0 @@ -The port was tested on Wind River System Sbc8560 board -. U-Boot was installed on the flash memory of the -CPU card (no the SODIMM). - -NOTE: Please configure uboot compile to the proper PCI frequency and -setup the appropriate DIP switch settings. - -SBC8560 board: - -Make sure boards switches are set to their appropriate conditions. -Refer to the Engineering Reference Guide ERG-00300-002. Of particular -importance are: 1) the settings for JP4 (JP4 1-3 and 2-4), which -select the on-board FLASH device (Intel 28F128Jx); 2) The settings -for the Clock SW9 (33 MHz or 66 MHz). - - Note: SW9 Settings: 66 MHz - 4:1 ratio CCB clocks:SYSCLK - 3:1 ration e500 Core:CCB - pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on - Note: SW9 Settings: 33 MHz - 8:1 ratio CCB clocks:SYSCLK - 3:1 ration e500 Core:CCB - pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on - - -Flashing the FLASH device with the "Wind River ICE": - -1) Properly connect and configure the Wind River ICE to the target - JTAG port. This includes running the SBC8560 register script. Make - sure target memory can be read and written. - -2) Build the u-boot image: - make distclean - make SBC8560_66_config or SBC8560_33_config - make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all - - Note: reference is made to the ELDK3.0 compiler. Further, it seems - the ppc_8xx compiler is required for the 85xx (no 85xx - designated compiler in ELDK3.0) - -3) Convert the uboot (.elf) file to a uboot.bin file (using - visionClick converter). The bin file should be converted from - fffc0000 to ffffffff - -4) Setup the Flash Utility (tools menu) for: - - Do a "dc clr" [visionClick] to load the default register settings - Determine the clock speed of the PCI bus and set SW9 accordingly - Note: the speed of the PCI bus defaults to the slowest PCI card - PlayBack the "default" register file for the SBC8560 - Select the uboot.bin file with zero bias - Select the initialize Target prior to programming - Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm - Select the erase base address from FFFC0000 to FFFFFFFF - Select the start address from 0 with size of 4000 - -5) Erase and Program diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c deleted file mode 100644 index e9babc6477..0000000000 --- a/board/sbc8560/ddr.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c deleted file mode 100644 index 4e6baed2f4..0000000000 --- a/board/sbc8560/law.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -/* LAW(Local Access Window) configuration: - * 0000_0000-0800_0000: DDR(512M) -or- larger - * c000_0000-cfff_ffff: PCI(256M) - * d000_0000-dfff_ffff: RapidIO(256M) - * e000_0000-ffff_ffff: localbus(512M) - * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6 - * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1 - * e800_0000-efff_ffff: LBC 128M, nothing here - * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3 - * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4 - * f800_0000-fdff_ffff: LBC 64M, nothing here - * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5 - * fd00_0000-fdff_ffff: LBC 16M, nothing here - * fe00_0000-feff_ffff: LBC 16M, nothing here - * ff00_0000-ff6f_ffff: LBC 7M, nothing here - * ff70_0000-ff7f_ffff: CCSRBAR 1M - * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0 - * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access - * Window. - * Note: If flash is 8M at default position(last 8M),no LAW needed. - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c deleted file mode 100644 index 98bc7df4c8..0000000000 --- a/board/sbc8560/sbc8560.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2003,Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt - * - * (C) Copyright 2004 Wind River Systems Inc . - * Added support for Wind River SBC8560 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ - /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ - /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ - /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ - /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ - /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ - /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ - /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ - /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ - /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ - /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ - /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ - /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ - /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ - /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ - /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ - /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ - /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ - /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ - /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */ - /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -int board_early_init_f (void) -{ -#if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); - - pci->peer &= 0xfffffffdf; /* disable master abort */ -#endif - return 0; -} - -void reset_phy (void) -{ -#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */ - volatile unsigned char *bcsr = (unsigned char *) CONFIG_SYS_BCSR; -#endif - /* reset Giga bit Ethernet port if needed here */ - - /* reset the CPM FEC port */ -#if (CONFIG_ETHER_INDEX == 2) - bcsr[0] &= ~0x20; - udelay(2); - bcsr[0] |= 0x20; - udelay(1000); -#elif (CONFIG_ETHER_INDEX == 3) - bcsr[0] &= ~0x10; - udelay(2); - bcsr[0] |= 0x10; - udelay(1000); -#endif -#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC) - /* reset PHY */ - miiphy_reset("FCC1", 0x0); - - /* change PHY address to 0x02 */ - bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028); - - bb_miiphy_write(NULL, 0x02, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#endif /* CONFIG_MII */ -} - -int checkboard (void) -{ - sys_info_t sysinfo; - char buf[32]; - - get_sys_info (&sysinfo); - -#ifdef CONFIG_SBC8560 - printf ("Board: Wind River SBC8560 Board\n"); -#else - printf ("Board: Wind River SBC8540 Board\n"); -#endif - printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor[0])); - printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus)); - printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2)); - if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \ - || (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) { - printf ("\tLBC: %s MHz\n", - strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f))); - } else { - printf("\tLBC: unknown\n"); - } - printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus)); - printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); - return (0); -} - - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test passed.\n"); - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -phys_size_t fixed_sdram(void) -{ - -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 - - #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - -#if (CONFIG_SYS_SDRAM_SIZE == 512) - ddr->cs0_bnds = 0x0000000f; -#else - ddr->cs0_bnds = 0x00000007; -#endif - ddr->cs1_bnds = 0x0010001f; - ddr->cs2_bnds = 0x00000000; - ddr->cs3_bnds = 0x00000000; - ddr->cs0_config = 0x80000102; - ddr->cs1_config = 0x80000102; - ddr->cs2_config = 0x00000000; - ddr->cs3_config = 0x00000000; - ddr->timing_cfg_1 = 0x37334321; - ddr->timing_cfg_2 = 0x00000800; - ddr->sdram_cfg = 0x42000000; - ddr->sdram_mode = 0x00000022; - ddr->sdram_interval = 0x05200100; - ddr->err_sbe = 0x00ff0000; - #if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - #endif - asm("sync;isync;msync"); - udelay(500); - #if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); - #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - #endif - asm("sync; isync; msync"); - udelay(500); - #endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - int node; -#ifdef CONFIG_PCI - const char *path; -#endif - - ft_cpu_setup(blob, bd); - - node = fdt_path_offset(blob, "/aliases"); - if (node >= 0) { -#ifdef CONFIG_PCI - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = hose.last_busno - hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif - } -} -#endif diff --git a/board/sbc8560/tlb.c b/board/sbc8560/tlb.c deleted file mode 100644 index fe0ac763af..0000000000 --- a/board/sbc8560/tlb.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { -/* TLB for CCSRBAR (IMMR) */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -/* TLB for Local Bus stuff, just map the whole 512M */ -/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */ - - SET_TLB_ENTRY(1, 0xe0000000, 0xe0000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, 0xf0000000, 0xf0000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - -#if !defined(CONFIG_SPD_EEPROM) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_256M, 1), -#endif - - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 6, BOOKE_PAGESZ_16K, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds index 0e78e4fd47..c0f107319e 100644 --- a/board/siemens/IAD210/u-boot.lds +++ b/board/siemens/IAD210/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds index 02d198001f..6cf7a01738 100644 --- a/board/sixnet/u-boot.lds +++ b/board/sixnet/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds index 9ab248a4e9..f57f8a0258 100644 --- a/board/snmc/qs850/u-boot.lds +++ b/board/snmc/qs850/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/snmc/qs860t/u-boot.lds +++ b/board/snmc/qs860t/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/spc1920/u-boot.lds +++ b/board/spc1920/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index a84e7fd35b..f69e39d583 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug index a95c47feac..4155b604fb 100644 --- a/board/spd8xx/u-boot.lds.debug +++ b/board/spd8xx/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/stx/stxxtc/u-boot.lds +++ b/board/stx/stxxtc/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/stx/stxxtc/u-boot.lds.debug +++ b/board/stx/stxxtc/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index c65f0228c3..163587512b 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -83,9 +83,11 @@ SECTIONS . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c index a3983e376b..188e4acc09 100644 --- a/board/ti/omap2420h4/omap2420h4.c +++ b/board/ti/omap2420h4/omap2420h4.c @@ -153,7 +153,7 @@ void wait_for_command_complete(unsigned int wd_base) ******************************************************************/ void ether_init (void) { -#ifdef CONFIG_DRIVER_LAN91C96 +#ifdef CONFIG_LAN91C96 int cnt = 20; __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */ diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index e905c26c6f..7cc41cd521 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -81,9 +81,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c index 871e052b04..c3dee8459e 100644 --- a/board/trizepsiv/conxs.c +++ b/board/trizepsiv/conxs.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -152,3 +153,11 @@ int board_eth_init(bd_t *bis) return dm9000_initialize(bis); } #endif + +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds index e62d53db54..fd2d72e8ae 100644 --- a/board/v37/u-boot.lds +++ b/board/v37/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 1958c2fb90..20161a46a6 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -57,6 +57,10 @@ SECTIONS *(.data) } + .u_boot_list : { + #include + } + . = ALIGN(4); .rel.dyn : { diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 1c67b301fb..2ce5a9a71c 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds index 3470b437e8..9b69d3d1e6 100644 --- a/board/westel/amx860/u-boot.lds +++ b/board/westel/amx860/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = .; diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug index 91d3e67e82..3e075a85bd 100644 --- a/board/westel/amx860/u-boot.lds.debug +++ b/board/westel/amx860/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index e2e66aec99..c4e5706543 100644 --- a/board/xes/xpedite1000/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -111,9 +111,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } __start___ex_table = .; diff --git a/boards.cfg b/boards.cfg index d467f566c0..4c63789041 100644 --- a/boards.cfg +++ b/boards.cfg @@ -380,6 +380,12 @@ M53017EVB m68k mcf532x m53017evb freesca M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0 M5329BFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=16 M5373EVB m68k mcf532x m5373evb freescale - M5373EVB:NANDFLASH_SIZE=16 +M54418TWR m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_nand_mii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 +M54418TWR_nand_rmii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_nand_rmii_lowfreq m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_serial_mii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 +M54418TWR_serial_rmii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000 M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000 M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333 @@ -405,6 +411,8 @@ M5485HFE m68k mcf547x_8x m548xevb freescale - microblaze-generic microblaze microblaze microblaze-generic xilinx qemu_mips mips mips32 qemu-mips - - qemu-mips:SYS_BIG_ENDIAN qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN +qemu_mips64 mips mips64 qemu-mips - - qemu-mips64:SYS_BIG_ENDIAN +qemu_mips64el mips mips64 qemu-mips - - qemu-mips64:SYS_LITTLE_ENDIAN vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND @@ -545,7 +553,6 @@ Alaska8220 powerpc mpc8220 alaska sorcery powerpc mpc8220 Yukon8220 powerpc mpc8220 alaska A3000 powerpc mpc824x a3000 -BMW powerpc mpc824x bmw CPC45 powerpc mpc824x cpc45 - - CPC45 CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM CU824 powerpc mpc824x cu824 @@ -678,21 +685,16 @@ MVBLM7 powerpc mpc83xx mvblm7 matrix_ SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP TQM834x powerpc mpc83xx tqm834x tqc -suvd3 powerpc mpc83xx km83xx keymile +suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3 +kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1 tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1 tuxx1 powerpc mpc83xx km83xx keymile kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5 -sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 -sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 -sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE sbc8548_PCI_66 powerpc mpc85xx sbc8548 - - sbc8548:PCI,66 sbc8548_PCI_66_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,66,PCIE -sbc8560 powerpc mpc85xx sbc8560 - - sbc8560 -sbc8560_33 powerpc mpc85xx sbc8560 - - sbc8560 -sbc8560_66 powerpc mpc85xx sbc8560 - - sbc8560 socrates powerpc mpc85xx socrates HWW1U1A powerpc mpc85xx hww1u1a exmeritus MPC8536DS powerpc mpc85xx mpc8536ds freescale - MPC8536DS @@ -843,6 +845,9 @@ BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M +T4240QDS powerpc mpc85xx t4qds freescale +T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 xpedite520x powerpc mpc85xx - xes xpedite537x powerpc mpc85xx - xes xpedite550x powerpc mpc85xx - xes diff --git a/common/Makefile b/common/Makefile index fdfead79c2..eac63605ce 100644 --- a/common/Makefile +++ b/common/Makefile @@ -70,6 +70,7 @@ COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o +COBJS-$(CONFIG_CMD_CBFS) += cmd_cbfs.o COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o @@ -204,6 +205,7 @@ COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o endif +COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o COBJS-y += console.o COBJS-y += dlmalloc.o COBJS-y += image.o diff --git a/common/bouncebuf.c b/common/bouncebuf.c new file mode 100644 index 0000000000..4f827f893d --- /dev/null +++ b/common/bouncebuf.c @@ -0,0 +1,92 @@ +/* + * Generic bounce buffer implementation + * + * Copyright (C) 2012 Marek Vasut + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +static int addr_aligned(void *data, size_t len) +{ + const ulong align_mask = ARCH_DMA_MINALIGN - 1; + + /* Check if start is aligned */ + if ((ulong)data & align_mask) { + debug("Unaligned start address %p\n", data); + return 0; + } + + data += len; + + /* Check if end is aligned */ + if ((ulong)data & align_mask) { + debug("Unaligned end address %p\n", data); + return 0; + } + + /* Aligned */ + return 1; +} + +int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags) +{ + void *tmp; + size_t alen; + + if (addr_aligned(*data, len)) { + *backup = NULL; + return 0; + } + + alen = roundup(len, ARCH_DMA_MINALIGN); + tmp = memalign(ARCH_DMA_MINALIGN, alen); + + if (!tmp) + return -ENOMEM; + + if (flags & GEN_BB_READ) + memcpy(tmp, *data, len); + + *backup = *data; + *data = tmp; + + return 0; +} + +int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags) +{ + void *tmp = *data; + + /* The buffer was already aligned, since "backup" is NULL. */ + if (!*backup) + return 0; + + if (flags & GEN_BB_WRITE) + memcpy(*backup, *data, len); + + *data = *backup; + free(tmp); + + return 0; +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 286c8c8011..48cdd16dd2 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -148,7 +148,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("ethspeed", bd->bi_ethspeed); #endif printf("IP addr = %s\n", getenv("ipaddr")); - printf("baudrate = %6ld bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", bd->bi_baudrate); print_num("relocaddr", gd->relocaddr); return 0; } @@ -175,7 +175,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -198,7 +198,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate); + printf("baudrate = %u bps\n", (ulong)bd->bi_baudrate); return 0; } @@ -231,7 +231,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %6ld bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", bd->bi_baudrate); return 0; } @@ -277,7 +277,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -304,7 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -324,7 +324,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -344,7 +344,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %lu bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -369,7 +369,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) print_num("TLB addr", gd->tlb_addr); #endif @@ -405,7 +405,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -439,7 +439,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); print_mhz("ethspeed", bd->bi_ethspeed); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -487,7 +487,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -509,7 +509,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } diff --git a/common/cmd_cbfs.c b/common/cmd_cbfs.c new file mode 100644 index 0000000000..3b6cfd879b --- /dev/null +++ b/common/cmd_cbfs.c @@ -0,0 +1,214 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CBFS commands + */ +#include +#include +#include + +int do_cbfs_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + uintptr_t end_of_rom = 0xffffffff; + char *ep; + + if (argc > 2) { + printf("usage: cbfsls [end of rom]>\n"); + return 0; + } + if (argc == 2) { + end_of_rom = (int)simple_strtoul(argv[1], &ep, 16); + if (*ep) { + puts("\n** Invalid end of ROM **\n"); + return 1; + } + } + file_cbfs_init(end_of_rom); + if (file_cbfs_result != CBFS_SUCCESS) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + return 0; +} + +U_BOOT_CMD( + cbfsinit, 2, 0, do_cbfs_init, + "initialize the cbfs driver", + "[end of rom]\n" + " - Initialize the cbfs driver. The optional 'end of rom'\n" + " parameter specifies where the end of the ROM is that the\n" + " CBFS is in. It defaults to 0xFFFFFFFF\n" +); + +int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_cachenode *file; + unsigned long offset; + unsigned long count; + char buf[12]; + long size; + + if (argc < 3) { + printf("usage: cbfsload [bytes]\n"); + return 1; + } + + /* parse offset and count */ + offset = simple_strtoul(argv[1], NULL, 16); + if (argc == 4) + count = simple_strtoul(argv[3], NULL, 16); + else + count = 0; + + file = file_cbfs_find(argv[2]); + if (!file) { + if (file_cbfs_result == CBFS_FILE_NOT_FOUND) + printf("%s: %s\n", file_cbfs_error(), argv[2]); + else + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf("reading %s\n", file_cbfs_name(file)); + + size = file_cbfs_read(file, (void *)offset, count); + + printf("\n%ld bytes read\n", size); + + sprintf(buf, "%lX", size); + setenv("filesize", buf); + + return 0; +} + +U_BOOT_CMD( + cbfsload, 4, 0, do_cbfs_fsload, + "load binary file from a cbfs filesystem", + " [bytes]\n" + " - load binary file 'filename' from the cbfs to address 'addr'\n" +); + +int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_cachenode *file = file_cbfs_get_first(); + int files = 0; + + if (!file) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf(" size type name\n"); + printf("------------------------------------------\n"); + while (file) { + u32 type = file_cbfs_type(file); + char *type_name = NULL; + const char *filename = file_cbfs_name(file); + + printf(" %8d", file_cbfs_size(file)); + + switch (type) { + case CBFS_TYPE_STAGE: + type_name = "stage"; + break; + case CBFS_TYPE_PAYLOAD: + type_name = "payload"; + break; + case CBFS_TYPE_OPTIONROM: + type_name = "option rom"; + break; + case CBFS_TYPE_BOOTSPLASH: + type_name = "boot splash"; + break; + case CBFS_TYPE_RAW: + type_name = "raw"; + break; + case CBFS_TYPE_VSA: + type_name = "vsa"; + break; + case CBFS_TYPE_MBI: + type_name = "mbi"; + break; + case CBFS_TYPE_MICROCODE: + type_name = "microcode"; + break; + case CBFS_COMPONENT_CMOS_DEFAULT: + type_name = "cmos default"; + break; + case CBFS_COMPONENT_CMOS_LAYOUT: + type_name = "cmos layout"; + break; + case -1UL: + type_name = "null"; + break; + } + if (type_name) + printf(" %16s", type_name); + else + printf(" %16d", type); + + if (filename[0]) + printf(" %s\n", filename); + else + printf(" %s\n", "(empty)"); + file_cbfs_get_next(&file); + files++; + } + + printf("\n%d file(s)\n\n", files); + return 0; +} + +U_BOOT_CMD( + cbfsls, 1, 1, do_cbfs_ls, + "list files", + " - list the files in the cbfs\n" +); + +int do_cbfs_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_header *header = file_cbfs_get_header(); + + if (!header) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf("\n"); + printf("CBFS version: %#x\n", header->version); + printf("ROM size: %#x\n", header->rom_size); + printf("Boot block size: %#x\n", header->boot_block_size); + printf("CBFS size: %#x\n", + header->rom_size - header->boot_block_size - header->offset); + printf("Alignment: %d\n", header->align); + printf("Offset: %#x\n", header->offset); + printf("\n"); + + return 0; +} + +U_BOOT_CMD( + cbfsinfo, 1, 1, do_cbfs_fsinfo, + "print information about filesystem", + " - print information about the cbfs filesystem\n" +); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index e2225c4d5c..a5e2cfcbfa 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -35,6 +35,9 @@ #define MAX_LEVEL 32 /* how deeply nested we will go */ #define SCRATCHPAD 1024 /* bytes of scratchpad memory */ +#ifndef CONFIG_CMD_FDT_MAX_DUMP +#define CONFIG_CMD_FDT_MAX_DUMP 64 +#endif /* * Global data (for the gd->bd) @@ -44,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR; static int fdt_valid(void); static int fdt_parse_prop(char *const*newval, int count, char *data, int *len); static int fdt_print(const char *pathp, char *prop, int depth); +static int is_printable_string(const void *data, int len); /* * The working_fdt points to our working flattened device tree. @@ -60,6 +64,34 @@ void set_working_fdt_addr(void *addr) setenv("fdtaddr", buf); } +/* + * Get a value from the fdt and format it to be set in the environment + */ +static int fdt_value_setenv(const void *nodep, int len, const char *var) +{ + if (is_printable_string(nodep, len)) + setenv(var, (void *)nodep); + else if (len == 4) { + char buf[11]; + + sprintf(buf, "0x%08X", *(uint32_t *)nodep); + setenv(var, buf); + } else if (len%4 == 0 && len <= 20) { + /* Needed to print things like sha1 hashes. */ + char buf[41]; + int i; + + for (i = 0; i < len; i += sizeof(unsigned int)) + sprintf(buf + (i * 2), "%08x", + *(unsigned int *)(nodep + i)); + setenv(var, buf); + } else { + printf("error: unprintable value\n"); + return 1; + } + return 0; +} + /* * Flattened Device Tree command, see the help for parameter definitions. */ @@ -250,6 +282,117 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } + /******************************************************************** + * Get the value of a property in the working_fdt. + ********************************************************************/ + } else if (argv[1][0] == 'g') { + char *subcmd; /* sub-command */ + char *pathp; /* path */ + char *prop; /* property */ + char *var; /* variable to store result */ + int nodeoffset; /* node offset from libfdt */ + const void *nodep; /* property node pointer */ + int len = 0; /* new length of the property */ + + /* + * Parameters: Node path, property, optional value. + */ + if (argc < 5) + return CMD_RET_USAGE; + + subcmd = argv[2]; + + if (argc < 6 && subcmd[0] != 's') + return CMD_RET_USAGE; + + var = argv[3]; + pathp = argv[4]; + prop = argv[5]; + + nodeoffset = fdt_path_offset(working_fdt, pathp); + if (nodeoffset < 0) { + /* + * Not found or something else bad happened. + */ + printf("libfdt fdt_path_offset() returned %s\n", + fdt_strerror(nodeoffset)); + return 1; + } + + if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) { + int reqIndex = -1; + int startDepth = fdt_node_depth( + working_fdt, nodeoffset); + int curDepth = startDepth; + int curIndex = -1; + int nextNodeOffset = fdt_next_node( + working_fdt, nodeoffset, &curDepth); + + if (subcmd[0] == 'n') + reqIndex = simple_strtoul(argv[5], NULL, 16); + + while (curDepth > startDepth) { + if (curDepth == startDepth + 1) + curIndex++; + if (subcmd[0] == 'n' && curIndex == reqIndex) { + const char *nodeName = fdt_get_name( + working_fdt, nextNodeOffset, NULL); + + setenv(var, (char *)nodeName); + return 0; + } + nextNodeOffset = fdt_next_node( + working_fdt, nextNodeOffset, &curDepth); + if (nextNodeOffset < 0) + break; + } + if (subcmd[0] == 's') { + /* get the num nodes at this level */ + char buf[11]; + + sprintf(buf, "%d", curIndex + 1); + setenv(var, buf); + } else { + /* node index not found */ + printf("libfdt node not found\n"); + return 1; + } + } else { + nodep = fdt_getprop( + working_fdt, nodeoffset, prop, &len); + if (len == 0) { + /* no property value */ + setenv(var, ""); + return 0; + } else if (len > 0) { + if (subcmd[0] == 'v') { + int ret; + + ret = fdt_value_setenv(nodep, len, var); + if (ret != 0) + return ret; + } else if (subcmd[0] == 'a') { + /* Get address */ + char buf[11]; + + sprintf(buf, "0x%08X", (uint32_t)nodep); + setenv(var, buf); + } else if (subcmd[0] == 's') { + /* Get size */ + char buf[11]; + + sprintf(buf, "0x%08X", len); + setenv(var, buf); + } else + return CMD_RET_USAGE; + return 0; + } else { + printf("libfdt fdt_getprop(): %s\n", + fdt_strerror(len)); + return 1; + } + } + /* * Print (recursive) / List (single level) */ @@ -611,12 +754,12 @@ static int is_printable_string(const void *data, int len) if (len == 0) return 0; - /* must terminate with zero */ - if (s[len - 1] != '\0') + /* must terminate with zero or '\n' */ + if (s[len - 1] != '\0' && s[len - 1] != '\n') return 0; /* printable or a null byte (concatenated strings) */ - while (((*s == '\0') || isprint(*s)) && (len > 0)) { + while (((*s == '\0') || isprint(*s) || isspace(*s)) && (len > 0)) { /* * If we see a null, there are three possibilities: * 1) If len == 1, it is the end of the string, printable @@ -672,19 +815,28 @@ static void print_data(const void *data, int len) } if ((len %4) == 0) { - const u32 *p; - - printf("<"); - for (j = 0, p = data; j < len/4; j ++) - printf("0x%x%s", fdt32_to_cpu(p[j]), j < (len/4 - 1) ? " " : ""); - printf(">"); + if (len > CONFIG_CMD_FDT_MAX_DUMP) + printf("* 0x%08x [0x%08x]", (unsigned int)data, len); + else { + const u32 *p; + + printf("<"); + for (j = 0, p = data; j < len/4; j++) + printf("0x%08x%s", fdt32_to_cpu(p[j]), + j < (len/4 - 1) ? " " : ""); + printf(">"); + } } else { /* anything else... hexdump */ - const u8 *s; - - printf("["); - for (j = 0, s = data; j < len; j++) - printf("%02x%s", s[j], j < len - 1 ? " " : ""); - printf("]"); + if (len > CONFIG_CMD_FDT_MAX_DUMP) + printf("* 0x%08x [0x%08x]", (unsigned int)data, len); + else { + const u8 *s; + + printf("["); + for (j = 0, s = data; j < len; j++) + printf("%02x%s", s[j], j < len - 1 ? " " : ""); + printf("]"); + } } } @@ -824,6 +976,10 @@ U_BOOT_CMD( "fdt resize - Resize fdt to size + padding to 4k addr\n" "fdt print [] - Recursive print starting at \n" "fdt list [] - Print one level starting at \n" + "fdt get value - Get and store in \n" + "fdt get name - Get name of node and store in \n" + "fdt get addr - Get start address of and store in \n" + "fdt get size [] - Get size of [] or num nodes and store in \n" "fdt set [] - Set [to ]\n" "fdt mknode - Create a new node after \n" "fdt rm [] - Delete the node or \n" diff --git a/common/cmd_help.c b/common/cmd_help.c index 8c8178e41d..3178a1aa42 100644 --- a/common/cmd_help.c +++ b/common/cmd_help.c @@ -26,9 +26,9 @@ int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - return _do_help(&__u_boot_cmd_start, - &__u_boot_cmd_end - &__u_boot_cmd_start, - cmdtp, flag, argc, argv); + cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd); + const int len = ll_entry_count(cmd_tbl_t, cmd); + return _do_help(start, len, cmdtp, flag, argc, argv); } U_BOOT_CMD( @@ -41,7 +41,7 @@ U_BOOT_CMD( ); /* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", #ifdef CONFIG_SYS_LONGHELP diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 795814d88f..82e63e1322 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -223,6 +223,54 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv return 0; } +static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u_char chip; + uint devaddr, alen, length; + u_char *memaddr; + + if (argc != 5) + return cmd_usage(cmdtp); + + /* + * memaddr is the address where to store things in memory + */ + memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16); + + /* + * I2C chip address + */ + chip = simple_strtoul(argv[2], NULL, 16); + + /* + * I2C data address within the chip. This can be 1 or + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + devaddr = simple_strtoul(argv[3], NULL, 16); + alen = get_alen(argv[3]); + if (alen > 3) + return cmd_usage(cmdtp); + + /* + * Length is the number of objects, not number of bytes. + */ + length = simple_strtoul(argv[4], NULL, 16); + + while (length-- > 0) { + if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) { + puts("Error writing to the chip.\n"); + return 1; + } +/* + * No write delay with FRAM devices. + */ +#if !defined(CONFIG_SYS_I2C_FRAM) + udelay(11000); +#endif + } + return 0; +} + /* * Syntax: * i2c md {i2c_chip} {addr}{.0, .1, .2} {len} @@ -557,18 +605,28 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg /* * Syntax: - * i2c probe {addr}{.0, .1, .2} + * i2c probe {addr} + * + * Returns zero (success) if one or more I2C devices was found */ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int j; + int addr = -1; + int found = 0; #if defined(CONFIG_SYS_I2C_NOPROBES) int k, skip; uchar bus = GET_BUS_NUM; #endif /* NOPROBES */ + if (argc == 2) + addr = simple_strtol(argv[1], 0, 16); + puts ("Valid chip addresses:"); for (j = 0; j < 128; j++) { + if ((0 <= addr) && (j != addr)) + continue; + #if defined(CONFIG_SYS_I2C_NOPROBES) skip = 0; for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { @@ -580,8 +638,10 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv if (skip) continue; #endif - if (i2c_probe(j) == 0) + if (i2c_probe(j) == 0) { printf(" %02X", j); + found++; + } } putc ('\n'); @@ -594,7 +654,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv putc ('\n'); #endif - return 0; + return (0 == found); } /* @@ -1282,6 +1342,7 @@ static cmd_tbl_t cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""), U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""), U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""), + U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""), U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""), #if defined(CONFIG_CMD_SDRAM) U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""), @@ -1331,8 +1392,9 @@ U_BOOT_CMD( "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" - "i2c probe - show devices on the I2C bus\n" + "i2c probe [address] - test for and show device(s) on the I2C bus\n" "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n" + "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n" "i2c reset - re-init the I2C Controller\n" #if defined(CONFIG_CMD_SDRAM) "i2c sdram chip - print SDRAM configuration information\n" diff --git a/common/cmd_ide.c b/common/cmd_ide.c index bae7767310..d508e9f75b 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -38,14 +38,6 @@ # include #endif -#ifdef CONFIG_8xx -# include -#endif - -#ifdef CONFIG_MPC5xxx -#include -#endif - #include #include @@ -53,10 +45,6 @@ # include #endif -#ifdef CONFIG_IDE_8xx_DIRECT -DECLARE_GLOBAL_DATA_PTR; -#endif - #ifdef __PPC__ # define EIEIO __asm__ volatile ("eieio") # define SYNC __asm__ volatile ("sync") @@ -65,45 +53,6 @@ DECLARE_GLOBAL_DATA_PTR; # define SYNC /* nothing */ #endif -#ifdef CONFIG_IDE_8xx_DIRECT -/* Timings for IDE Interface - * - * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk - * 70 165 30 PIO-Mode 0, [ns] - * 4 9 2 [Cycles] - * 50 125 20 PIO-Mode 1, [ns] - * 3 7 2 [Cycles] - * 30 100 15 PIO-Mode 2, [ns] - * 2 6 1 [Cycles] - * 30 80 10 PIO-Mode 3, [ns] - * 2 5 1 [Cycles] - * 25 70 10 PIO-Mode 4, [ns] - * 2 4 1 [Cycles] - */ - -const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] = -{ - /* Setup Length Hold */ - { 70, 165, 30 }, /* PIO-Mode 0, [ns] */ - { 50, 125, 20 }, /* PIO-Mode 1, [ns] */ - { 30, 101, 15 }, /* PIO-Mode 2, [ns] */ - { 30, 80, 10 }, /* PIO-Mode 3, [ns] */ - { 25, 70, 10 }, /* PIO-Mode 4, [ns] */ -}; - -static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1]; - -#ifndef CONFIG_SYS_PIO_MODE -#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */ -#endif -static int pio_mode = CONFIG_SYS_PIO_MODE; - -/* Make clock cycles and always round up */ - -#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U ) - -#endif /* CONFIG_IDE_8xx_DIRECT */ - /* ------------------------------------------------------------------------- */ /* Current I/O Device */ @@ -124,19 +73,6 @@ static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS]; block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; /* ------------------------------------------------------------------------- */ -#ifdef CONFIG_IDE_LED -# if !defined(CONFIG_BMS2003) && \ - !defined(CONFIG_CPC45) && \ - !defined(CONFIG_KUP4K) && \ - !defined(CONFIG_KUP4X) -static void ide_led (uchar led, uchar status); -#else -extern void ide_led (uchar led, uchar status); -#endif -#else -#define ide_led(a,b) /* dummy */ -#endif - #ifdef CONFIG_IDE_RESET static void ide_reset (void); #else @@ -152,8 +88,6 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -static void input_data(int dev, ulong *sect_buf, int words); -static void output_data(int dev, const ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); #ifndef CONFIG_SYS_ATA_PORT_ADDR @@ -166,10 +100,6 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer); #endif -#ifdef CONFIG_IDE_8xx_DIRECT -static void set_pcmcia_timing (int pmode); -#endif - /* ------------------------------------------------------------------------- */ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) @@ -339,6 +269,33 @@ int do_diskboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) /* ------------------------------------------------------------------------- */ +void __ide_led(uchar led, uchar status) +{ +#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */ + static uchar led_buffer; /* Buffer for current LED status */ + + uchar *led_port = LED_PORT; + + if (status) /* switch LED on */ + led_buffer |= led; + else /* switch LED off */ + led_buffer &= ~led; + + *led_port = led_buffer; +#endif +} + +void ide_led(uchar led, uchar status) + __attribute__ ((weak, alias("__ide_led"))); + +#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */ +# define DEVICE_LED(x) 0 +# define LED_IDE1 1 +# define LED_IDE2 2 +#endif + +/* ------------------------------------------------------------------------- */ + inline void __ide_outb(int dev, int port, unsigned char val) { debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", @@ -392,25 +349,14 @@ inline int ide_set_piomode(int pio_mode) void ide_init(void) { - -#ifdef CONFIG_IDE_8xx_DIRECT - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); -#endif unsigned char c; int i, bus; -#if defined(CONFIG_SC3) - unsigned int ata_reset_time = ATA_RESET_TIME; -#endif #ifdef CONFIG_IDE_8xx_PCCARD - extern int pcmcia_on(void); extern int ide_devices_found; /* Initialized in check_ide_device() */ #endif /* CONFIG_IDE_8xx_PCCARD */ #ifdef CONFIG_IDE_PREINIT - extern int ide_preinit(void); - WATCHDOG_RESET(); if (ide_preinit()) { @@ -419,40 +365,8 @@ void ide_init(void) } #endif /* CONFIG_IDE_PREINIT */ -#ifdef CONFIG_IDE_8xx_PCCARD - extern int pcmcia_on(void); - extern int ide_devices_found; /* Initialized in check_ide_device() */ - - WATCHDOG_RESET(); - - ide_devices_found = 0; - /* initialize the PCMCIA IDE adapter card */ - pcmcia_on(); - if (!ide_devices_found) - return; - udelay(1000000); /* 1 s */ -#endif /* CONFIG_IDE_8xx_PCCARD */ - WATCHDOG_RESET(); -#ifdef CONFIG_IDE_8xx_DIRECT - /* Initialize PIO timing tables */ - for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) { - pio_config_clk[i].t_setup = - PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk); - pio_config_clk[i].t_length = - PCMCIA_MK_CLKS(pio_config_ns[i].t_length, - gd->bus_clk); - pio_config_clk[i].t_hold = - PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk); - debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk" - " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup, - pio_config_clk[i].t_setup, pio_config_ns[i].t_length, - pio_config_clk[i].t_length, pio_config_ns[i].t_hold, - pio_config_clk[i].t_hold); - } -#endif /* CONFIG_IDE_8xx_DIRECT */ - /* * Reset the IDE just to be sure. * Light LED's to show @@ -462,14 +376,14 @@ void ide_init(void) /* ATAPI Drives seems to need a proper IDE Reset */ ide_reset(); -#ifdef CONFIG_IDE_8xx_DIRECT - /* PCMCIA / IDE initialization for common mem space */ - pcmp->pcmc_pgcrb = 0; +#ifdef CONFIG_IDE_INIT_POSTRESET + WATCHDOG_RESET(); - /* start in PIO mode 0 - most relaxed timings */ - pio_mode = 0; - set_pcmcia_timing(pio_mode); -#endif /* CONFIG_IDE_8xx_DIRECT */ + if (ide_init_postreset()) { + puts("ide_preinit_postreset failed\n"); + return; + } +#endif /* CONFIG_IDE_INIT_POSTRESET */ /* * Wait for IDE to get ready. @@ -502,11 +416,7 @@ void ide_init(void) c = ide_inb(dev, ATA_STATUS); i++; -#if defined(CONFIG_SC3) - if (i > (ata_reset_time * 100)) { -#else if (i > (ATA_RESET_TIME * 100)) { -#endif puts("** Timeout **\n"); /* LED's off */ ide_led((LED_IDE1 | LED_IDE2), 0); @@ -538,9 +448,7 @@ void ide_init(void) curr_device = -1; for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) { -#ifdef CONFIG_IDE_LED int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2; -#endif ide_dev_desc[i].type = DEV_TYPE_UNKNOWN; ide_dev_desc[i].if_type = IF_TYPE_IDE; ide_dev_desc[i].dev = i; @@ -575,120 +483,26 @@ block_dev_desc_t *ide_get_dev(int dev) } #endif +/* ------------------------------------------------------------------------- */ -#ifdef CONFIG_IDE_8xx_DIRECT - -static void set_pcmcia_timing(int pmode) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); - ulong timings; - - debug("Set timing for PIO Mode %d\n", pmode); - - timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold) - | PCMCIA_SST(pio_config_clk[pmode].t_setup) - | PCMCIA_SL(pio_config_clk[pmode].t_length); - - /* - * IDE 0 - */ - pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0; - pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 -#if (CONFIG_SYS_PCMCIA_POR0 != 0) - | timings -#endif - ; - debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0); - - pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1; - pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 -#if (CONFIG_SYS_PCMCIA_POR1 != 0) - | timings -#endif - ; - debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1); - - pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2; - pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 -#if (CONFIG_SYS_PCMCIA_POR2 != 0) - | timings -#endif - ; - debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2); - - pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3; - pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 -#if (CONFIG_SYS_PCMCIA_POR3 != 0) - | timings -#endif - ; - debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3); - - /* - * IDE 1 - */ - pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4; - pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 -#if (CONFIG_SYS_PCMCIA_POR4 != 0) - | timings -#endif - ; - debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4); - - pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5; - pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 -#if (CONFIG_SYS_PCMCIA_POR5 != 0) - | timings -#endif - ; - debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5); - - pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6; - pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 -#if (CONFIG_SYS_PCMCIA_POR6 != 0) - | timings -#endif - ; - debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6); - - pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7; - pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 -#if (CONFIG_SYS_PCMCIA_POR7 != 0) - | timings -#endif - ; - debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7); - -} +void ide_input_swap_data(int dev, ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_input_swap_data"))); -#endif /* CONFIG_IDE_8xx_DIRECT */ +void ide_input_data(int dev, ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_input_data"))); -/* ------------------------------------------------------------------------- */ +void ide_output_data(int dev, const ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_output_data"))); /* We only need to swap data if we are running on a big endian cpu. */ -/* But Au1x00 cpu:s already swaps data in big endian mode! */ -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00) -#define input_swap_data(x,y,z) input_data(x,y,z) -#else -static void input_swap_data(int dev, ulong *sect_buf, int words) +#if defined(__LITTLE_ENDIAN) +void __ide_input_swap_data(int dev, ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar i; - volatile uchar *pbuf_even = - (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - volatile uchar *pbuf_odd = - (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - ushort *dbuf = (ushort *) sect_buf; - - while (words--) { - for (i = 0; i < 2; i++) { - *(((uchar *) (dbuf)) + 1) = *pbuf_even; - *(uchar *) dbuf = *pbuf_odd; - dbuf += 1; - } - } + ide_input_data(dev, sect_buf, words); +} #else +void __ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ volatile ushort *pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); ushort *dbuf = (ushort *) sect_buf; @@ -700,64 +514,32 @@ static void input_swap_data(int dev, ulong *sect_buf, int words) #ifdef __MIPS__ *dbuf++ = swab16p((u16 *) pbuf); *dbuf++ = swab16p((u16 *) pbuf); -#elif defined(CONFIG_PCS440EP) - *dbuf++ = *pbuf; - *dbuf++ = *pbuf; #else *dbuf++ = ld_le16(pbuf); *dbuf++ = ld_le16(pbuf); #endif /* !MIPS */ } -#endif } -#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */ +#endif /* __LITTLE_ENDIAN */ #if defined(CONFIG_IDE_SWAP_IO) -static void output_data(int dev, const ulong *sect_buf, int words) +void __ide_output_data(int dev, const ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - dbuf = (uchar *) sect_buf; - while (words--) { - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - } -#else ushort *dbuf; volatile ushort *pbuf; pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); dbuf = (ushort *) sect_buf; while (words--) { -#if defined(CONFIG_PCS440EP) - /* not tested, because CF was write protected */ - EIEIO; - *pbuf = ld_le16(dbuf++); - EIEIO; - *pbuf = ld_le16(dbuf++); -#else EIEIO; *pbuf = *dbuf++; EIEIO; *pbuf = *dbuf++; -#endif } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void output_data(int dev, const ulong *sect_buf, int words) +void __ide_output_data(int dev, const ulong *sect_buf, int words) { #if defined(CONFIG_IDE_AHB) ide_write_data(dev, sect_buf, words); @@ -768,31 +550,8 @@ static void output_data(int dev, const ulong *sect_buf, int words) #endif /* CONFIG_IDE_SWAP_IO */ #if defined(CONFIG_IDE_SWAP_IO) -static void input_data(int dev, ulong *sect_buf, int words) +void __ide_input_data(int dev, ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - dbuf = (uchar *) sect_buf; - while (words--) { - *dbuf++ = *pbuf_even; - EIEIO; - SYNC; - *dbuf++ = *pbuf_odd; - EIEIO; - SYNC; - *dbuf++ = *pbuf_even; - EIEIO; - SYNC; - *dbuf++ = *pbuf_odd; - EIEIO; - SYNC; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -802,22 +561,14 @@ static void input_data(int dev, ulong *sect_buf, int words) debug("in input data base for read is %lx\n", (unsigned long) pbuf); while (words--) { -#if defined(CONFIG_PCS440EP) - EIEIO; - *dbuf++ = ld_le16(pbuf); - EIEIO; - *dbuf++ = ld_le16(pbuf); -#else EIEIO; *dbuf++ = *pbuf; EIEIO; *dbuf++ = *pbuf; -#endif } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void input_data(int dev, ulong *sect_buf, int words) +void __ide_input_data(int dev, ulong *sect_buf, int words) { #if defined(CONFIG_IDE_AHB) ide_read_data(dev, sect_buf, words); @@ -927,7 +678,7 @@ static void ide_ident(block_dev_desc_t *dev_desc) return; #endif - input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS); + ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS); ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev, sizeof(dev_desc->revision)); @@ -1189,7 +940,7 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) break; } - input_data(device, buffer, ATA_SECTORWORDS); + ide_input_data(device, buffer, ATA_SECTORWORDS); (void) ide_inb(device, ATA_STATUS); /* clear IRQ */ ++n; @@ -1282,7 +1033,7 @@ ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer) goto WR_OUT; } - output_data(device, buffer, ATA_SECTORWORDS); + ide_output_data(device, buffer, ATA_SECTORWORDS); c = ide_inb(device, ATA_STATUS); /* clear IRQ */ ++n; ++blknr; @@ -1352,9 +1103,6 @@ extern void ide_set_reset(int idereset); static void ide_reset(void) { -#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR) - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; -#endif int i; curr_device = -1; @@ -1370,51 +1118,6 @@ static void ide_reset(void) WATCHDOG_RESET(); -#ifdef CONFIG_SYS_PB_12V_ENABLE - /* 12V Enable output OFF */ - immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE); - - immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE); - immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE); - immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE; - - /* wait 500 ms for the voltage to stabilize */ - for (i = 0; i < 500; ++i) - udelay(1000); - - /* 12V Enable output ON */ - immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE; -#endif /* CONFIG_SYS_PB_12V_ENABLE */ - -#ifdef CONFIG_SYS_PB_IDE_MOTOR - /* configure IDE Motor voltage monitor pin as input */ - immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR); - immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR); - immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR); - - /* wait up to 1 s for the motor voltage to stabilize */ - for (i = 0; i < 1000; ++i) { - if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) { - break; - } - udelay(1000); - } - - if (i == 1000) { /* Timeout */ - printf("\nWarning: 5V for IDE Motor missing\n"); -#ifdef CONFIG_STATUS_LED -#ifdef STATUS_LED_YELLOW - status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON); -#endif -#ifdef STATUS_LED_GREEN - status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF); -#endif -#endif /* CONFIG_STATUS_LED */ - } -#endif /* CONFIG_SYS_PB_IDE_MOTOR */ - - WATCHDOG_RESET(); - /* de-assert RESET signal */ ide_set_reset(0); @@ -1427,27 +1130,6 @@ static void ide_reset(void) /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_IDE_LED) && \ - !defined(CONFIG_CPC45) && \ - !defined(CONFIG_KUP4K) && \ - !defined(CONFIG_KUP4X) - -static uchar led_buffer; /* Buffer for current LED status */ - -static void ide_led(uchar led, uchar status) -{ - uchar *led_port = LED_PORT; - - if (status) /* switch LED on */ - led_buffer |= led; - else /* switch LED off */ - led_buffer &= ~led; - - *led_port = led_buffer; -} - -#endif /* CONFIG_IDE_LED */ - #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev) { @@ -1463,25 +1145,18 @@ int ide_device_present(int dev) * ATAPI Support */ +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) + __attribute__ ((weak, alias("__ide_input_data_shorts"))); + +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) + __attribute__ ((weak, alias("__ide_output_data_shorts"))); + + #if defined(CONFIG_IDE_SWAP_IO) /* since ATAPI may use commands with not 4 bytes alligned length * we have our own transfer functions, 2 bytes alligned */ -static void output_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - while (shorts--) { - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -1495,25 +1170,10 @@ static void output_data_shorts(int dev, ushort *sect_buf, int shorts) EIEIO; *pbuf = *dbuf++; } -#endif } -static void input_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - while (shorts--) { - EIEIO; - *dbuf++ = *pbuf_even; - EIEIO; - *dbuf++ = *pbuf_odd; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -1527,16 +1187,15 @@ static void input_data_shorts(int dev, ushort *sect_buf, int shorts) EIEIO; *dbuf++ = *pbuf; } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void output_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) { outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); } -static void input_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) { insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); } @@ -1615,7 +1274,7 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, } /* write command block */ - output_data_shorts(device, (unsigned short *) ccb, ccblen / 2); + ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2); /* ATAPI Command written wait for completition */ udelay(5000); /* device must set bsy */ @@ -1666,12 +1325,12 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, /* ok now decide if it is an in or output */ if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) { debug("Write to device\n"); - output_data_shorts(device, (unsigned short *) buffer, - n); + ide_output_data_shorts(device, + (unsigned short *) buffer, n); } else { debug("Read from device @ %p shorts %d\n", buffer, n); - input_data_shorts(device, (unsigned short *) buffer, - n); + ide_input_data_shorts(device, + (unsigned short *) buffer, n); } } udelay(5000); /* seems that some CD ROMs need this... */ diff --git a/common/command.c b/common/command.c index aa0fb0a3d3..50c84292c1 100644 --- a/common/command.c +++ b/common/command.c @@ -137,8 +137,9 @@ cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len) cmd_tbl_t *find_cmd (const char *cmd) { - int len = &__u_boot_cmd_end - &__u_boot_cmd_start; - return find_cmd_tbl(cmd, &__u_boot_cmd_start, len); + cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd); + const int len = ll_entry_count(cmd_tbl_t, cmd); + return find_cmd_tbl(cmd, start, len); } int cmd_usage(const cmd_tbl_t *cmdtp) @@ -181,7 +182,9 @@ int var_complete(int argc, char * const argv[], char last_char, int maxv, char * static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]) { - cmd_tbl_t *cmdtp; + cmd_tbl_t *cmdtp = ll_entry_start(cmd_tbl_t, cmd); + const int count = ll_entry_count(cmd_tbl_t, cmd); + const cmd_tbl_t *cmdend = cmdtp + count; const char *p; int len, clen; int n_found = 0; @@ -195,12 +198,12 @@ static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv if (argc == 0) { /* output full list of commands */ - for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { + for (; cmdtp != cmdend; cmdtp++) { if (n_found >= maxv - 2) { - cmdv[n_found++] = "..."; + cmdv[n_found] = "..."; break; } - cmdv[n_found++] = cmdtp->name; + cmdv[n_found] = cmdtp->name; } cmdv[n_found] = NULL; return n_found; @@ -228,7 +231,7 @@ static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv len = p - cmd; /* return the partial matches */ - for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { + for (; cmdtp != cmdend; cmdtp++) { clen = strlen(cmdtp->name); if (clen < len) diff --git a/common/env_common.c b/common/env_common.c index 61c4be54d0..3d3cb70a6d 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -37,102 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************ * Default settings to be used when no valid environment is found */ - -const uchar default_environment[] = { -#ifdef CONFIG_BOOTARGS - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#ifdef CONFIG_BOOTCOMMAND - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#ifdef CONFIG_RAMBOOTCOMMAND - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#ifdef CONFIG_NFSBOOTCOMMAND - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=1\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" -}; +#include struct hsearch_data env_htab = { .apply = env_check_apply, diff --git a/common/env_embedded.c b/common/env_embedded.c index 8cc08ae4da..52bc6873dd 100644 --- a/common/env_embedded.c +++ b/common/env_embedded.c @@ -89,107 +89,9 @@ # define ENV_CRC (~0) #endif -env_t environment __PPCENV__ = { - ENV_CRC, /* CRC Sum */ -#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT - 1, /* Flags: valid */ -#endif - { -#if defined(CONFIG_BOOTARGS) - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#if defined(CONFIG_BOOTCOMMAND) - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#if defined(CONFIG_RAMBOOTCOMMAND) - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_NFSBOOTCOMMAND) - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=" "1" "\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" /* Term. env_t.data with 2 NULs */ - } -}; +#define DEFAULT_ENV_INSTANCE_EMBEDDED +#include + #ifdef CONFIG_ENV_ADDR_REDUND env_t redundand_environment __PPCENV__ = { 0, /* CRC Sum: invalid */ diff --git a/common/image.c b/common/image.c index f084d2baed..750a98b6ba 100644 --- a/common/image.c +++ b/common/image.c @@ -2496,6 +2496,36 @@ int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, return 0; } +#ifndef USE_HOSTCC +/** + * fit_image_hash_get_ignore - get hash ignore flag + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @ignore: pointer to an int, will hold hash ignore flag + * + * fit_image_hash_get_ignore() finds hash ignore property in a given hash node. + * If the property is found and non-zero, the hash algorithm is not verified by + * u-boot automatically. + * + * returns: + * 0, on ignore not found + * value, on ignore found + */ +int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore) +{ + int len; + int *value; + + value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len); + if (value == NULL || len != sizeof(int)) + *ignore = 0; + else + *ignore = *value; + + return 0; +} +#endif + /** * fit_set_timestamp - set node timestamp property * @fit: pointer to the FIT format image header @@ -2759,6 +2789,9 @@ int fit_image_check_hashes(const void *fit, int image_noffset) char *algo; uint8_t *fit_value; int fit_value_len; +#ifndef USE_HOSTCC + int ignore; +#endif uint8_t value[FIT_MAX_HASH_LEN]; int value_len; int noffset; @@ -2795,6 +2828,14 @@ int fit_image_check_hashes(const void *fit, int image_noffset) } printf("%s", algo); +#ifndef USE_HOSTCC + fit_image_hash_get_ignore(fit, noffset, &ignore); + if (ignore) { + printf("-skipped "); + continue; + } +#endif + if (fit_image_hash_get_value(fit, noffset, &fit_value, &fit_value_len)) { err_msg = " error!\nCan't get hash value " @@ -2820,6 +2861,11 @@ int fit_image_check_hashes(const void *fit, int image_noffset) } } + if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { + err_msg = " error!\nCorrupted or truncated tree"; + goto error; + } + return 1; error: diff --git a/common/usb.c b/common/usb.c index 1c9763cb6c..50b81752eb 100644 --- a/common/usb.c +++ b/common/usb.c @@ -508,8 +508,8 @@ int usb_get_configuration_no(struct usb_device *dev, tmp = le16_to_cpu(config->wTotalLength); if (tmp > USB_BUFSIZ) { - USB_PRINTF("usb_get_configuration_no: failed to get " \ - "descriptor - too long: %d\n", tmp); + printf("usb_get_configuration_no: failed to get " \ + "descriptor - too long: %d\n", tmp); return -1; } @@ -946,7 +946,13 @@ int usb_new_device(struct usb_device *dev) le16_to_cpus(&dev->descriptor.idProduct); le16_to_cpus(&dev->descriptor.bcdDevice); /* only support for one config for now */ - usb_get_configuration_no(dev, tmpbuf, 0); + err = usb_get_configuration_no(dev, tmpbuf, 0); + if (err < 0) { + printf("usb_new_device: Cannot read configuration, " \ + "skipping device %04x:%04x\n", + dev->descriptor.idVendor, dev->descriptor.idProduct); + return -1; + } usb_parse_config(dev, tmpbuf, 0); usb_set_maxpacket(dev); /* we set the default configuration here */ diff --git a/common/usb_storage.c b/common/usb_storage.c index 950451e11f..0c2a4c718f 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -179,9 +179,9 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *us, int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, struct us_data *ss); unsigned long usb_stor_read(int device, unsigned long blknr, - unsigned long blkcnt, void *buffer); + lbaint_t blkcnt, void *buffer); unsigned long usb_stor_write(int device, unsigned long blknr, - unsigned long blkcnt, const void *buffer); + lbaint_t blkcnt, const void *buffer); struct usb_device * usb_get_dev_index(int index); void uhci_show_temp_int_td(void); @@ -1053,9 +1053,10 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor, #endif /* CONFIG_USB_BIN_FIXUP */ unsigned long usb_stor_read(int device, unsigned long blknr, - unsigned long blkcnt, void *buffer) + lbaint_t blkcnt, void *buffer) { - unsigned long start, blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; struct usb_device *dev; struct us_data *ss; @@ -1084,7 +1085,7 @@ unsigned long usb_stor_read(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx" + USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", device, start, blks, buf_addr); do { @@ -1114,7 +1115,8 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n", + USB_STOR_PRINTF("usb_read: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ @@ -1124,9 +1126,10 @@ retry_it: } unsigned long usb_stor_write(int device, unsigned long blknr, - unsigned long blkcnt, const void *buffer) + lbaint_t blkcnt, const void *buffer) { - unsigned long start, blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; struct usb_device *dev; struct us_data *ss; @@ -1156,7 +1159,7 @@ unsigned long usb_stor_write(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx" + USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", device, start, blks, buf_addr); do { @@ -1188,7 +1191,8 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n", + USB_STOR_PRINTF("usb_write: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ diff --git a/config.mk b/config.mk index bb5c69a15d..b7cd4814fe 100644 --- a/config.mk +++ b/config.mk @@ -23,6 +23,8 @@ ######################################################################### +include $(TOPDIR)/helper.mk + ifeq ($(CURDIR),$(SRCTREE)) dir := else diff --git a/disk/part.c b/disk/part.c index 30229692fb..4646f682d2 100644 --- a/disk/part.c +++ b/disk/part.c @@ -35,12 +35,15 @@ #define PRINTF(fmt,args...) #endif +/* Rather than repeat this expression each time, add a define for it */ #if (defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_CMD_SCSI) || \ defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) ) +#define HAVE_BLOCK_DEVICE +#endif struct block_drvr { char *name; @@ -71,6 +74,7 @@ static const struct block_drvr block_drvr[] = { DECLARE_GLOBAL_DATA_PTR; +#ifdef HAVE_BLOCK_DEVICE block_dev_desc_t *get_dev(const char *ifname, int dev) { const struct block_drvr *drvr = block_drvr; @@ -104,12 +108,7 @@ block_dev_desc_t *get_dev(const char *ifname, int dev) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) +#ifdef HAVE_BLOCK_DEVICE /* ------------------------------------------------------------------------- */ /* @@ -239,18 +238,7 @@ void dev_print (block_dev_desc_t *dev_desc) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -#if defined(CONFIG_MAC_PARTITION) || \ - defined(CONFIG_DOS_PARTITION) || \ - defined(CONFIG_ISO_PARTITION) || \ - defined(CONFIG_AMIGA_PARTITION) || \ - defined(CONFIG_EFI_PARTITION) +#ifdef HAVE_BLOCK_DEVICE void init_part (block_dev_desc_t * dev_desc) { @@ -293,6 +281,12 @@ void init_part (block_dev_desc_t * dev_desc) } +#if defined(CONFIG_MAC_PARTITION) || \ + defined(CONFIG_DOS_PARTITION) || \ + defined(CONFIG_ISO_PARTITION) || \ + defined(CONFIG_AMIGA_PARTITION) || \ + defined(CONFIG_EFI_PARTITION) + static void print_part_header (const char *type, block_dev_desc_t * dev_desc) { puts ("\nPartition Map for "); @@ -326,6 +320,8 @@ static void print_part_header (const char *type, block_dev_desc_t * dev_desc) dev_desc->dev, type); } +#endif /* any CONFIG_..._PARTITION */ + void print_part (block_dev_desc_t * dev_desc) { @@ -372,24 +368,12 @@ void print_part (block_dev_desc_t * dev_desc) puts ("## Unknown partition table\n"); } - -#else /* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION -# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION -# error nor CONFIG_EFI_PARTITION configured! -#endif - -#endif +#endif /* HAVE_BLOCK_DEVICE */ int get_partition_info(block_dev_desc_t *dev_desc, int part , disk_partition_t *info) { -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE #ifdef CONFIG_PARTITION_UUIDS /* The common case is no UUID support */ @@ -444,7 +428,7 @@ int get_partition_info(block_dev_desc_t *dev_desc, int part default: break; } -#endif +#endif /* HAVE_BLOCK_DEVICE */ return -1; } @@ -561,6 +545,8 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, info->size = (*dev_desc)->lba; info->blksz = (*dev_desc)->blksz; info->bootable = 0; + strcpy((char *)info->type, BOOT_PART_TYPE); + strcpy((char *)info->name, "Whole Disk"); #ifdef CONFIG_PARTITION_UUIDS info->uuid[0] = 0; #endif @@ -624,9 +610,9 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, */ if (p == MAX_SEARCH_PARTITIONS + 1) *info = tmpinfo; - ret = 0; } else { printf("** No valid partitions found **\n"); + ret = -1; goto cleanup; } } diff --git a/disk/part_dos.c b/disk/part_dos.c index 5c454e65ab..3fe901ba1b 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -65,13 +65,14 @@ static inline int is_bootable(dos_partition_t *p) return p->boot_ind == 0x80; } -static void print_one_part (dos_partition_t *p, int ext_part_sector, int part_num) +static void print_one_part(dos_partition_t *p, int ext_part_sector, + int part_num, unsigned int disksig) { int lba_start = ext_part_sector + le32_to_int (p->start4); int lba_size = le32_to_int (p->size4); - printf("%5d\t\t%10d\t%10d\t%2x%s%s\n", - part_num, lba_start, lba_size, p->sys_ind, + printf("%3d\t%-10d\t%-10d\t%08x-%02x\t%02x%s%s\n", + part_num, lba_start, lba_size, disksig, part_num, p->sys_ind, (is_extended(p->sys_ind) ? " Extd" : ""), (is_bootable(p) ? " Boot" : "")); } @@ -105,8 +106,9 @@ int test_part_dos (block_dev_desc_t *dev_desc) /* Print a partition that is relative to its Extended partition table */ -static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative, - int part_num) +static void print_partition_extended(block_dev_desc_t *dev_desc, + int ext_part_sector, int relative, + int part_num, unsigned int disksig) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz); dos_partition_t *pt; @@ -125,6 +127,9 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s return; } + if (!ext_part_sector) + disksig = le32_to_int(&buffer[DOS_PART_DISKSIG_OFFSET]); + /* Print all primary/logical partitions */ pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET); for (i = 0; i < 4; i++, pt++) { @@ -135,7 +140,7 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s if ((pt->sys_ind != 0) && (ext_part_sector == 0 || !is_extended (pt->sys_ind)) ) { - print_one_part (pt, ext_part_sector, part_num); + print_one_part(pt, ext_part_sector, part_num, disksig); } /* Reverse engr the fdisk part# assignment rule! */ @@ -151,10 +156,9 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s if (is_extended (pt->sys_ind)) { int lba_start = le32_to_int (pt->start4) + relative; - print_partition_extended (dev_desc, lba_start, - ext_part_sector == 0 ? lba_start - : relative, - part_num); + print_partition_extended(dev_desc, lba_start, + ext_part_sector == 0 ? lba_start : relative, + part_num, disksig); } } @@ -261,8 +265,8 @@ static int get_partition_info_extended (block_dev_desc_t *dev_desc, int ext_part void print_part_dos (block_dev_desc_t *dev_desc) { - printf ("Partition Start Sector Num Sectors Type\n"); - print_partition_extended (dev_desc, 0, 0, 1); + printf("Part\tStart Sector\tNum Sectors\tUUID\t\tType\n"); + print_partition_extended(dev_desc, 0, 0, 1, 0); } int get_partition_info_dos (block_dev_desc_t *dev_desc, int part, disk_partition_t * info) diff --git a/disk/part_efi.c b/disk/part_efi.c index 264ea9c77f..a3873cebb3 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -113,6 +113,35 @@ static char *print_efiname(gpt_entry *pte) return name; } +static void uuid_string(unsigned char *uuid, char *str) +{ + static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, + 12, 13, 14, 15}; + int i; + + for (i = 0; i < 16; i++) { + sprintf(str, "%02x", uuid[le[i]]); + str += 2; + switch (i) { + case 3: + case 5: + case 7: + case 9: + *str++ = '-'; + break; + } + } +} + +static efi_guid_t system_guid = PARTITION_SYSTEM_GUID; + +static inline int is_bootable(gpt_entry *p) +{ + return p->attributes.fields.legacy_bios_bootable || + !memcmp(&(p->partition_type_guid), &system_guid, + sizeof(efi_guid_t)); +} + /* * Public Functions (include/part.h) */ @@ -122,6 +151,7 @@ void print_part_efi(block_dev_desc_t * dev_desc) ALLOC_CACHE_ALIGN_BUFFER(gpt_header, gpt_head, 1); gpt_entry *gpt_pte = NULL; int i = 0; + char uuid[37]; if (!dev_desc) { printf("%s: Invalid Argument(s)\n", __func__); @@ -136,17 +166,25 @@ void print_part_efi(block_dev_desc_t * dev_desc) debug("%s: gpt-entry at %p\n", __func__, gpt_pte); - printf("Part\tName\t\t\tStart LBA\tEnd LBA\n"); + printf("Part\tStart LBA\tEnd LBA\t\tName\n"); + printf("\tAttributes\n"); + printf("\tType UUID\n"); + printf("\tPartition UUID\n"); + for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) { + /* Stop at the first non valid PTE */ + if (!is_pte_valid(&gpt_pte[i])) + break; - if (is_pte_valid(&gpt_pte[i])) { - printf("%3d\t%-18s\t0x%08llX\t0x%08llX\n", (i + 1), - print_efiname(&gpt_pte[i]), - le64_to_int(gpt_pte[i].starting_lba), - le64_to_int(gpt_pte[i].ending_lba)); - } else { - break; /* Stop at the first non valid PTE */ - } + printf("%3d\t0x%08llx\t0x%08llx\t\"%s\"\n", (i + 1), + le64_to_int(gpt_pte[i].starting_lba), + le64_to_int(gpt_pte[i].ending_lba), + print_efiname(&gpt_pte[i])); + printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw); + uuid_string(gpt_pte[i].partition_type_guid.b, uuid); + printf("\ttype:\t%s\n", uuid); + uuid_string(gpt_pte[i].unique_partition_guid.b, uuid); + printf("\tuuid:\t%s\n", uuid); } /* Remember to free pte */ @@ -154,28 +192,6 @@ void print_part_efi(block_dev_desc_t * dev_desc) return; } -#ifdef CONFIG_PARTITION_UUIDS -static void uuid_string(unsigned char *uuid, char *str) -{ - static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, - 12, 13, 14, 15}; - int i; - - for (i = 0; i < 16; i++) { - sprintf(str, "%02x", uuid[le[i]]); - str += 2; - switch (i) { - case 3: - case 5: - case 7: - case 9: - *str++ = '-'; - break; - } - } -} -#endif - int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, disk_partition_t * info) { @@ -212,6 +228,7 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, sprintf((char *)info->name, "%s", print_efiname(&gpt_pte[part - 1])); sprintf((char *)info->type, "U-Boot"); + info->bootable = is_bootable(&gpt_pte[part - 1]); #ifdef CONFIG_PARTITION_UUIDS uuid_string(gpt_pte[part - 1].unique_partition_guid.b, info->uuid); #endif @@ -405,7 +422,7 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, count = le32_to_int(pgpt_head->num_partition_entries) * le32_to_int(pgpt_head->sizeof_partition_entry); - debug("%s: count = %lu * %lu = %u\n", __func__, + debug("%s: count = %lu * %lu = %zu\n", __func__, le32_to_int(pgpt_head->num_partition_entries), le32_to_int(pgpt_head->sizeof_partition_entry), count); @@ -415,7 +432,8 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, } if (count == 0 || pte == NULL) { - printf("%s: ERROR: Can't allocate 0x%X bytes for GPT Entries\n", + printf("%s: ERROR: Can't allocate 0x%zX " + "bytes for GPT Entries\n", __func__, count); return NULL; } @@ -457,7 +475,7 @@ static int is_pte_valid(gpt_entry * pte) sizeof(unused_guid.b)) == 0) { debug("%s: Found an unused PTE GUID at 0x%08X\n", __func__, - (unsigned int)pte); + (unsigned int)(uintptr_t)pte); return 0; } else { diff --git a/disk/part_efi.h b/disk/part_efi.h index 5903e7c812..4e28d1dcb6 100644 --- a/disk/part_efi.h +++ b/disk/part_efi.h @@ -111,10 +111,15 @@ typedef struct _gpt_header { unsigned char reserved2[GPT_BLOCK_SIZE - 92]; } __attribute__ ((packed)) gpt_header; -typedef struct _gpt_entry_attributes { - unsigned long long required_to_function:1; - unsigned long long reserved:47; - unsigned long long type_guid_specific:16; +typedef union _gpt_entry_attributes { + struct { + unsigned long long required_to_function:1; + unsigned long long no_block_io_protocol:1; + unsigned long long legacy_bios_bootable:1; + unsigned long long reserved:45; + unsigned long long type_guid_specific:16; + } fields; + unsigned long long raw; } __attribute__ ((packed)) gpt_entry_attributes; #define PARTNAME_SZ (72 / sizeof(efi_char16_t)) diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile index 2f2ddfc865..da88b32419 100644 --- a/doc/DocBook/Makefile +++ b/doc/DocBook/Makefile @@ -8,7 +8,7 @@ include $(TOPDIR)/config.mk -DOCBOOKS := +DOCBOOKS := linker_lists.xml stdio.xml ### # The build process is as follows (targets): diff --git a/doc/DocBook/linker_lists.tmpl b/doc/DocBook/linker_lists.tmpl new file mode 100644 index 0000000000..f1975165d6 --- /dev/null +++ b/doc/DocBook/linker_lists.tmpl @@ -0,0 +1,46 @@ + + + + + + The U-Boot Linker-Generated Arrays + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of U-Boot Bootloader. + + + + + + + + Linker-Generated Arrays +!Iinclude/linker_lists.h + + + diff --git a/doc/DocBook/stdio.tmpl b/doc/DocBook/stdio.tmpl new file mode 100644 index 0000000000..4783abb0a0 --- /dev/null +++ b/doc/DocBook/stdio.tmpl @@ -0,0 +1,46 @@ + + + + + + The U-Boot STDIO subsystem + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of U-Boot Bootloader. + + + + + + + + U-Boot Serial subsystem +!Idrivers/serial/serial.c + + + diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308 new file mode 100644 index 0000000000..925663ba50 --- /dev/null +++ b/doc/README.VSC3316-3308 @@ -0,0 +1,43 @@ +This file contains API information of the initialization code written for +Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS + +Author: Shaveta Leekha + +About Device: +============= +VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. + +VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. + +Initialization: +=============== +On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state. +First thing required is to program it to interface with either two-wire or four-wire interface. +In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register). + +API Overview: +============= + + vsc_if_enable(u8 vsc_addr): + -------------------------- + This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. + Parameters: + vsc_addr - Address of the VSC device on board. + + + vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con): + --------------------------------------------------------- + This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured. + Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc. + vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308. + + Parameters: + vsc_addr - Address of the VSC device on board. + con_arr - connection array + num_con - number of connections to be configured + + vsc_wp_config(u8 vsc_addr): + -------------------------- + For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API. + Parameters: + vsc_addr - Address of the VSC device on board. diff --git a/doc/README.commands b/doc/README.commands index 125f077c08..923418b1a4 100644 --- a/doc/README.commands +++ b/doc/README.commands @@ -15,12 +15,12 @@ help: Long description. This is a string **** Behind the scene ****** -The structure created is named with a special prefix (__u_boot_cmd_) +The structure created is named with a special prefix (__u_boot_list_cmd_) and placed by the linker in a special section. This makes it possible for the final link to extract all commands compiled into any object code and construct a static array so the -command can be found in an array starting at __u_boot_cmd_start. +command can be found in an array starting at _u_boot_list_cmd__start. To ensure that the linker does not discard these symbols when linking full U-Boot we generate a list of all the commands we have built (based @@ -33,6 +33,6 @@ If a new board is defined do not forget to define the command section by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these 3 lines: - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include "u-boot.lst"; + } diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index f94b56f628..3992640ba3 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -103,6 +103,11 @@ The ways to configure the ddr interleaving mode # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1) setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3" + # bank(chip-select) interleaving (auto) + setenv hwconfig "fsl_ddr:bank_intlv=auto" + This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings + on DIMMs. + Memory controller address hashing ================================== If the DDR controller supports address hashing, it can be enabled by hwconfig. diff --git a/doc/README.m54418twr b/doc/README.m54418twr new file mode 100644 index 0000000000..f69ae01912 --- /dev/null +++ b/doc/README.m54418twr @@ -0,0 +1,244 @@ +Freescale MCF54418TWR ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created Mar 22, 2012 +=========================================== + + +Changed files: +============== + +- board/freescale/m54418twr/m54418twr.c Dram setup +- board/freescale/m54418twr/Makefile Makefile +- board/freescale/m54418twr/config.mk config make +- board/freescale/m54418twr/u-boot.lds Linker description + +- arch/m68k/cpu/mcf5445x/cpu.c cpu specific code +- arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs +- arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support +- arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock +- arch/m68k/cpu/mcf5445x/Makefile Makefile +- arch/m68k/cpu/mcf5445x/config.mk config make +- arch/m68k/cpu/mcf5445x/start.S start up assembly code + +- doc/README.m54418twr This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/net/mcfmii.c ColdFire common MII driver +- drivers/serial/mcfuart.c ColdFire common UART driver + +- arch/m68k/include/asm/bitops.h Bit operation function export +- arch/m68k/include/asm/byteorder.h Byte order functions +- arch/m68k/include/asm/fec.h FEC structure and definition +- arch/m68k/include/asm/global_data.h Global data structure +- arch/m68k/include/asm/immap.h ColdFire specific header file and driver macros +- arch/m68k/include/asm/immap_5441x.h mcf5441x specific header file +- arch/m68k/include/asm/io.h io functions +- arch/m68k/include/asm/m5441x.h mcf5441x specific header file +- arch/m68k/include/asm/posix_types.h Posix +- arch/m68k/include/asm/processor.h header file +- arch/m68k/include/asm/ptrace.h Exception structure +- arch/m68k/include/asm/rtc.h Realtime clock header file +- arch/m68k/include/asm/string.h String function export +- arch/m68k/include/asm/timer.h Timer structure and definition +- arch/m68k/include/asm/types.h Data types definition +- arch/m68k/include/asm/uart.h Uart structure and definition +- arch/m68k/include/asm/u-boot.h u-boot structure + +- include/configs/M54418TWR.h Board specific configuration file + +- arch/m68k/lib/board.c board init function +- arch/m68k/lib/cache.c +- arch/m68k/lib/interrupts.c Coldfire common interrupt functions +- arch/m68k/lib/time.c Timer functions (Dma timer and PIT) +- arch/m68k/lib/traps.c Exception init code + +1 MCF5441x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M54418TWR Development Board +CONFIG_MCF5441x -- define for all MCF5441x CPUs +CONFIG_M54418 -- define for all Freescale MCF54418 CPUs +CONFIG_M54418TWR -- define for M54418TWR board + +CONFIG_MCFUART -- define to use common CF Uart driver +CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_MII -- enable to use MII driver +CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery +CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer +CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- +CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration +CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration +CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register +CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop +CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot + +CONFIG_MCFTMR -- define to use DMA timer + +CONFIG_SYS_IMMR -- define for MBAR offset + +CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc + +CONFIG_SYS_MBAR -- define MBAR offset + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM + +CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register +CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register +CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register + +CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + MRAM: 0x00000000-0x0003FFFF (256KB) + DDR: 0x40000000-0x47FFFFFF (128MB) + SRAM: 0x80000000-0x8000FFFF (64KB) + IP: 0xE0000000-0xFFFFFFFF (512MB) + +3. COMPILATION +============== +3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF version) +from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +3.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot + make distclean + make M54418TWR_config, or - default to spi serial flash boot, 50Mhz input clock + make M54418TWR_nand_mii_config, or - default to nand flash boot, mii mode, 25Mhz input clock + make M54418TWR_nand_rmii_config, or - default to nand flash boot, rmii mode, 50Mhz input clock + make M54418TWR_nand_rmii_lowfreq_config, or - default to nand flash boot, rmii mode, 50Mhz input clock + make M54418TWR_serial_mii_config, or - default to spi serial flash boot, 25Mhz input clock + make M54418TWR_serial_rmii_config, or - default to spi serial flash boot, 50Mhz input clock + make + +4. SCREEN DUMP +============== +4.1 M54418TWR Development board + Boot from NAND flash (NOTE: May not show exactly the same) + +U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54) + +CPU: Freescale MCF54418 (Mask:a3 Version:1) + CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz + INP CLK 50 MHz VCO CLK 500 MHz +Board: Freescale MCF54418 Tower System +SPI: ready +DRAM: 128 MiB +NAND: 256 MiB +In: serial +Out: serial +Err: serial +Net: FEC0, FEC1 +-> pri +baudrate=115200 +bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k +ernel)ro,-(jffs2) console=ttyS0,115200 +bootdelay=2 +eth1addr=00:e0:0c:bc:e5:61 +ethact=FEC0 +ethaddr=00:e0:0c:bc:e5:60 +fileaddr=40010000 +filesize=27354 +gatewayip=192.168.1.1 +hostname=M54418TWR +inpclk=50000000 +ipaddr=192.168.1.2 +load=tftp ${loadaddr} ${u-boot}; +loadaddr=0x40010000 +mem=129024k +netdev=eth0 +netmask=255.255.255.0 +prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save +serverip=192.168.1.1 +stderr=serial +stdin=serial +stdout=serial +u-boot=u-boot.bin +upd=run load; run prog + +Environment size: 653/131068 bytes +-> bdinfo +memstart = 0x40000000 +memsize = 0x08000000 +flashstart = 0x00000000 +flashsize = 0x00000000 +flashoffset = 0x00000000 +sramstart = 0x80000000 +sramsize = 0x00010000 +mbar = 0xFC000000 +cpufreq = 250 MHz +busfreq = 125 MHz +flbfreq = 125 MHz +inpfreq = 50 MHz +vcofreq = 500 MHz +ethaddr = 00:e0:0c:bc:e5:60 +eth1addr = 00:e0:0c:bc:e5:61 +ip_addr = 192.168.1.2 +baudrate = 115200 bps +-> help +? - alias for 'help' +base - print or set address offset +bdinfo - print Board Info structure +boot - boot default, i.e., run 'bootcmd' +bootd - boot default, i.e., run 'bootcmd' +bootelf - Boot from an ELF image in memory +bootm - boot application image from memory +bootp - boot image via network using BOOTP/TFTP protocol +bootvx - Boot vxWorks from an ELF image +cmp - memory compare +coninfo - print console devices and information +cp - memory copy +crc32 - checksum calculation +dcache - enable or disable data cache +dhcp - boot image via network using DHCP/TFTP protocol +echo - echo args to console +editenv - edit environment variable +env - environment handling commands +exit - exit script +false - do nothing, unsuccessfully +go - start application at address 'addr' +help - print command description/usage +icache - enable or disable instruction cache +iminfo - print header information for application image +imxtract- extract a part of a multi-image +itest - return true/false on integer compare +loop - infinite loop on address range +md - memory display +mdio - MDIO utility commands +mii - MII utility commands +mm - memory modify (auto-incrementing address) +mtest - simple RAM read/write test +mw - memory write (fill) +nand - NAND sub-system +nb_update- Nand boot update program +nboot - boot from NAND device +nfs - boot image via network using NFS protocol +nm - memory modify (constant address) +ping - send ICMP ECHO_REQUEST to network host +printenv- print environment variables +reginfo - print register information +reset - Perform RESET of the CPU +run - run commands in an environment variable +saveenv - save environment variables to persistent storage +setenv - set environment variables +sf - SPI flash sub-system +showvar - print local hushshell variables +sleep - delay execution for some time +source - run script from memory +sspi - SPI utility command +test - minimal test like /bin/sh +tftpboot- boot image via network using TFTP protocol +true - do nothing, successfully +version - print monitor, compiler and linker version diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table new file mode 100644 index 0000000000..8da768a2a6 --- /dev/null +++ b/doc/README.mpc85xx-spin-table @@ -0,0 +1,26 @@ +Spin table in cache +===================================== +As specified by ePAPR v1.1, the spin table needs to be in cached memory. After +DDR is initialized and U-boot relocates itself into DDR, the spin table is +accessible for core 0. It is part of release.S, within 4KB range after +__secondary_start_page. For other cores to use the spin table, the booting +process is described below: + +Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory +is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of +the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot +page translation for secondary cores to use this page of memory. Then 4KB +memory is copied from __secondary_start_page to the boot page, after flusing +cache because this page is mapped as normal DDR. Before copying the reset page, +core 0 puts the physical address of the spin table (which is in release.S and +relocated to the top of mapped memory) into a variable __spin_table_addr so +that secondary cores can see it. + +When secondary cores boot up from 0xffff_f000 page, they only have one default +TLB. While booting, they set up another TLB in AS=1 space and jump into +the new space. The new TLB covers the physical address of the spin table page, +with WIMGE =0b00100. Now secondary cores can keep polling the spin table +without stress DDR bus because both the code and the spin table is in cache. + +For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep +cache coherence. diff --git a/doc/README.t4240qds b/doc/README.t4240qds new file mode 100644 index 0000000000..677d120a80 --- /dev/null +++ b/doc/README.t4240qds @@ -0,0 +1,98 @@ +Overview +-------- +The T4240QDS is a high-performance computing evaluation, development and test +platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is +optimized to support the high-bandwidth DDR3 memory ports, as well as the +highly-configurable SerDes ports. The system is lead-free and RoHS-compliant. + +Board Features + SERDES Connections + 32 lanes grouped into four 8-lane banks + Two “front side” banks dedicated to Ethernet + - High-speed crosspoint switch fabric on selected lanes + - Two PCI Express slots with side-band connector supporting + - SGMII + - XAUI + - HiGig + - I-pass connectors allow board-to-board and loopback support + Two “back side” banks dedicated to other protocols + - High-speed crosspoint switch fabric on all lanes + - Four PCI Express slots with side-band connector supporting + - PCI Express 3.0 + - SATA 2.0 + - SRIO 2.0 + - Supports 4X Aurora debug with two connectors + DDR Controllers + Three independant 64-bit DDR3 controllers + Supports rates of 1866 up to 2133 MHz data-rate + Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller + DDR power supplies 1.5V to all devices with automatic tracking of VTT. + Power software-switchable to 1.35V if software detects all DDR3LP devices. + MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and + 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time + increases by 1 clock. + + IFC/Local Bus + NAND flash: 8-bit, async or sync, up to 2GB. + NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB + NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB + - NOR devices support 16 virtual banks + GASIC: Minimal target within Qixis FPGA + PromJET rapid memory download support + Address demultiplexing handled within FPGA. + - Flexible demux allows 8 or 16 bit evaluation. + IFC Debug/Development card + - Support for 32-bit devices + Ethernet + Support two on-board RGMII 10/100/1G ethernet ports. + SGMII and XAUI support via SERDES block (see above). + 1588 support via Symmetricom board. + QIXIS System Logic FPGA + Manages system power and reset sequencing + Manages DUT, board, clock, etc. configuration for dynamic shmoo + Collects V-I-T data in background for code/power profiling. + Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion) + General fault monitoring and logging + Runs from ATX “hot” power rails allowing operation while system is off. + Clocks + System and DDR clock (SYSCLK, “DDRCLK”) + - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz. + - Software selectable in 1MHz increments from 1-200MHz. + SERDES clocks + - Provides clocks to all SerDes blocks and slots + - 100, 125 and 156.25 MHz + Power Supplies + Dedicated regulators for VDD + - Adjustable from (0.7V to 1.3V at 80A + - Regulators can be controlled by VID and/or software + Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A + - VTT/MVREF automatically track operating voltage + Dedicated regulators/filters for AVDD supplies + Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc. + USB + Supports two USB 2.0 ports with integrated PHYs + - One type A, one type micro-AB with 1.0A power per port. + Other IO + eSDHC/MMC + - SDHC card slot + eSPI port + - High-speed serial flash + Two Serial port + Four I2C ports + +Memory map +---------- +The addresses in brackets are physical addresses. + +0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB) +0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory +0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR +0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan +0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan +0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO +0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash +0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR +0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS +0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores + +The physical address of the last (boot page translation) varies with the actual DDR size. diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 3147123bba..44ba90ef57 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -43,12 +43,18 @@ static struct sh_i2c *base; #define SH_I2C_ICCR_SCP (1 << 0) /* ICSR / ICIC */ -#define SH_IC_BUSY (1 << 3) +#define SH_IC_BUSY (1 << 4) #define SH_IC_TACK (1 << 2) #define SH_IC_WAIT (1 << 1) #define SH_IC_DTE (1 << 0) -static u8 iccl, icch; +#ifdef CONFIG_SH_I2C_8BIT +/* store 8th bit of iccl and icch in ICIC register */ +#define SH_I2C_ICIC_ICCLB8 (1 << 7) +#define SH_I2C_ICIC_ICCHB8 (1 << 6) +#endif + +static u16 iccl, icch; #define IRQ_WAIT 1000 @@ -63,6 +69,20 @@ static void irq_dte(struct sh_i2c *base) } } +static int irq_dte_with_tack(struct sh_i2c *base) +{ + int i; + + for (i = 0 ; i < IRQ_WAIT ; i++) { + if (SH_IC_DTE & readb(&base->icsr)) + break; + if (SH_IC_TACK & readb(&base->icsr)) + return -1; + udelay(10); + } + return 0; +} + static void irq_busy(struct sh_i2c *base) { int i; @@ -74,71 +94,97 @@ static void irq_busy(struct sh_i2c *base) } } -static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) +static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) { - writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); - writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr); - - writeb(iccl, &base->iccl); - writeb(icch, &base->icch); - writeb(0, &base->icic); + u8 icic = SH_IC_TACK; + + clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); + setbits_8(&base->iccr, SH_I2C_ICCR_ICE); + + writeb(iccl & 0xff, &base->iccl); + writeb(icch & 0xff, &base->icch); +#ifdef CONFIG_SH_I2C_8BIT + if (iccl > 0xff) + icic |= SH_I2C_ICIC_ICCLB8; + if (icch > 0xff) + icic |= SH_I2C_ICIC_ICCHB8; +#endif + writeb(icic, &base->icic); writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); + clrbits_8(&base->icsr, SH_IC_TACK); writeb(id << 1, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + return -1; writeb(reg, &base->icdr); if (stop) writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + return -1; + return 0; } static void i2c_finish(struct sh_i2c *base) { writeb(0, &base->icsr); - writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); + clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); } -static void i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val) +static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val) { - i2c_set_addr(base, id, reg, 0); + int ret = -1; + if (i2c_set_addr(base, id, reg, 0) != 0) + goto exit0; udelay(10); writeb(val, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; irq_busy(base); - + ret = 0; +exit0: i2c_finish(base); + return ret; } -static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) +static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) { - u8 ret; - - i2c_set_addr(base, id, reg, 1); + int ret = -1; + +#if defined(CONFIG_SH73A0) + if (i2c_set_addr(base, id, reg, 0) != 0) + goto exit0; +#else + if (i2c_set_addr(base, id, reg, 1) != 0) + goto exit0; udelay(100); +#endif writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); writeb(id << 1 | 0x01, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; - ret = readb(&base->icdr); + ret = readb(&base->icdr) & 0xff; writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr); readb(&base->icdr); /* Dummy read */ irq_busy(base); - +exit0: i2c_finish(base); return ret; @@ -166,6 +212,21 @@ int i2c_set_bus_num(unsigned int bus) case 1: base = (void *)CONFIG_SH_I2C_BASE1; break; +#ifdef CONFIG_SH_I2C_BASE2 + case 2: + base = (void *)CONFIG_SH_I2C_BASE2; + break; +#endif +#ifdef CONFIG_SH_I2C_BASE3 + case 3: + base = (void *)CONFIG_SH_I2C_BASE3; + break; +#endif +#ifdef CONFIG_SH_I2C_BASE4 + case 4: + base = (void *)CONFIG_SH_I2C_BASE4; + break; +#endif default: return -1; } @@ -206,18 +267,18 @@ void i2c_init(int speed, int slaveaddr) denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW); tmp = num * 10 / denom; if (tmp % 10 >= 5) - iccl = (u8)((num/denom) + 1); + iccl = (u16)((num/denom) + 1); else - iccl = (u8)(num/denom); + iccl = (u16)(num/denom); /* Calculate the value for icch. From the data sheet: icch = (p clock / transfer rate) * (H / (L + H)) */ num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH; tmp = num * 10 / denom; if (tmp % 10 >= 5) - icch = (u8)((num/denom) + 1); + icch = (u16)((num/denom) + 1); else - icch = (u8)(num/denom); + icch = (u16)(num/denom); } /* @@ -235,10 +296,14 @@ void i2c_init(int speed, int slaveaddr) */ int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len) { + int ret; int i = 0; - for (i = 0 ; i < len ; i++) - buffer[i] = i2c_raw_read(base, chip, addr + i); - + for (i = 0 ; i < len ; i++) { + ret = i2c_raw_read(base, chip, addr + i); + if (ret < 0) + return -1; + buffer[i] = ret & 0xff; + } return 0; } @@ -259,8 +324,8 @@ int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) { int i = 0; for (i = 0; i < len ; i++) - i2c_raw_write(base, chip, addr + i, buffer[i]); - + if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0) + return -1; return 0; } @@ -272,5 +337,9 @@ int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) */ int i2c_probe(u8 chip) { - return 0; + int ret; + + ret = i2c_set_addr(base, chip, 0, 1); + i2c_finish(base); + return ret; } diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c index c3bc5360ca..26958aaa3e 100644 --- a/drivers/input/i8042.c +++ b/drivers/input/i8042.c @@ -26,6 +26,7 @@ /* includes */ #include +#include #ifdef CONFIG_USE_CPCIDVI extern u8 gt_cpcidvi_in8(u32 offset); @@ -320,6 +321,54 @@ static int kbd_controller_present(void) return in8(I8042_STATUS_REG) != 0xff; } +/* + * Implement a weak default function for boards that optionally + * need to skip the i8042 initialization. + */ +int __weak board_i8042_skip(void) +{ + /* As default, don't skip */ + return 0; +} + +void i8042_flush(void) +{ + int timeout; + + /* + * The delay is to give the keyboard controller some time to fill the + * next byte. + */ + while (1) { + timeout = 100; /* wait for no longer than 100us */ + while (timeout > 0 && !(in8(I8042_STATUS_REG) & 0x01)) { + udelay(1); + timeout--; + } + + /* Try to pull next byte if not timeout. */ + if (in8(I8042_STATUS_REG) & 0x01) + in8(I8042_DATA_REG); + else + break; + } +} + +int i8042_disable(void) +{ + if (kbd_input_empty() == 0) + return -1; + + /* Disable keyboard */ + out8(I8042_COMMAND_REG, 0xad); + + if (kbd_input_empty() == 0) + return -1; + + return 0; +} + + /******************************************************************************* * * i8042_kbd_init - reset keyboard and init state flags @@ -329,7 +378,7 @@ int i8042_kbd_init(void) int keymap, try; char *penv; - if (!kbd_controller_present()) + if (!kbd_controller_present() || board_i8042_skip()) return -1; #ifdef CONFIG_USE_CPCIDVI @@ -607,11 +656,22 @@ static void kbd_led_set(void) static int kbd_input_empty(void) { - int kbdTimeout = KBD_TIMEOUT; + int kbdTimeout = KBD_TIMEOUT * 1000; + + while ((in8(I8042_STATUS_REG) & I8042_STATUS_IN_DATA) && kbdTimeout--) + udelay(1); + + return kbdTimeout != -1; +} + +/******************************************************************************/ + +static int wait_until_kbd_output_full(void) +{ + int kbdTimeout = KBD_TIMEOUT * 1000; - /* wait for input buf empty */ - while ((in8(I8042_STATUS_REG) & 0x02) && kbdTimeout--) - udelay(1000); + while (((in8(I8042_STATUS_REG) & 0x01) == 0) && kbdTimeout--) + udelay(1); return kbdTimeout != -1; } @@ -620,31 +680,39 @@ static int kbd_input_empty(void) static int kbd_reset(void) { + /* KB Reset */ if (kbd_input_empty() == 0) return -1; out8(I8042_DATA_REG, 0xff); - udelay(250000); + if (wait_until_kbd_output_full() == 0) + return -1; + + if (in8(I8042_DATA_REG) != 0xfa) /* ACK */ + return -1; + + if (wait_until_kbd_output_full() == 0) + return -1; + + if (in8(I8042_DATA_REG) != 0xaa) /* Test Pass*/ + return -1; if (kbd_input_empty() == 0) return -1; -#ifdef CONFIG_USE_CPCIDVI + /* Set KBC mode */ out8(I8042_COMMAND_REG, 0x60); -#else - out8(I8042_DATA_REG, 0x60); -#endif if (kbd_input_empty() == 0) return -1; out8(I8042_DATA_REG, 0x45); - if (kbd_input_empty() == 0) return -1; + /* Enable Keyboard */ out8(I8042_COMMAND_REG, 0xae); if (kbd_input_empty() == 0) diff --git a/drivers/input/input.c b/drivers/input/input.c index 5b2b4b0714..98006679b3 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -93,6 +93,22 @@ static unsigned char kbd_ctrl_xlate[] = { '\r', 0xff, 0xff }; +/* + * Scan key code to ANSI 3.64 escape sequence table. This table is + * incomplete in that it does not include all possible extra keys. + */ +static struct { + int kbd_scan_code; + char *escape; +} kbd_to_ansi364[] = { + { KEY_UP, "\033[A"}, + { KEY_DOWN, "\033[B"}, + { KEY_RIGHT, "\033[C"}, + { KEY_LEFT, "\033[D"}, +}; + +/* Maximum number of output characters that an ANSI sequence expands to */ +#define ANSI_CHAR_MAX 3 int input_queue_ascii(struct input_config *config, int ch) { @@ -289,24 +305,67 @@ static int input_check_keycodes(struct input_config *config, } /** + * Checks and converts a special key code into ANSI 3.64 escape sequence. + * + * @param config Input state + * @param keycode Key code to examine + * @param output_ch Buffer to place output characters into. It should + * be at least ANSI_CHAR_MAX bytes long, to allow for + * an ANSI sequence. + * @param max_chars Maximum number of characters to add to output_ch + * @return number of characters output, if the key was converted, otherwise 0. + * This may be larger than max_chars, in which case the overflow + * characters are not output. + */ +static int input_keycode_to_ansi364(struct input_config *config, + int keycode, char output_ch[], int max_chars) +{ + const char *escape; + int ch_count; + int i; + + for (i = ch_count = 0; i < ARRAY_SIZE(kbd_to_ansi364); i++) { + if (keycode != kbd_to_ansi364[i].kbd_scan_code) + continue; + for (escape = kbd_to_ansi364[i].escape; *escape; escape++) { + if (ch_count < max_chars) + output_ch[ch_count] = *escape; + ch_count++; + } + return ch_count; + } + + return 0; +} + +/** + * Converts and queues a list of key codes in escaped ASCII string form * Convert a list of key codes into ASCII * * You must call input_check_keycodes() before this. It turns the keycode - * list into a list of ASCII characters which are ready to send to the - * input layer. + * list into a list of ASCII characters and sends them to the input layer. * * Characters which were seen last time do not generate fresh ASCII output. + * The output (calls to queue_ascii) may be longer than num_keycodes, if the + * keycode contains special keys that was encoded to longer escaped sequence. * * @param config Input state * @param keycode List of key codes to examine * @param num_keycodes Number of key codes + * @param output_ch Buffer to place output characters into. It should + * be at last ANSI_CHAR_MAX * num_keycodes, to allow for + * ANSI sequences. + * @param max_chars Maximum number of characters to add to output_ch * @param same Number of key codes which are the same + * @return number of characters written into output_ch, or -1 if we would + * exceed max_chars chars. */ static int input_keycodes_to_ascii(struct input_config *config, - int keycode[], int num_keycodes, char output_ch[], int same) + int keycode[], int num_keycodes, char output_ch[], + int max_chars, int same) { struct input_key_xlate *table; - int ch_count; + int ch_count = 0; int i; table = &config->table[0]; @@ -321,19 +380,31 @@ static int input_keycodes_to_ascii(struct input_config *config, } } - /* now find normal keys */ - for (i = ch_count = 0; i < num_keycodes; i++) { + /* Start conversion by looking for the first new keycode (by same). */ + for (i = same; i < num_keycodes; i++) { int key = keycode[i]; + int ch = (key < table->num_entries) ? table->xlate[key] : 0xff; - if (key < table->num_entries && i >= same) { - int ch = table->xlate[key]; - - /* If a normal key with an ASCII value, add it! */ - if (ch != 0xff) - output_ch[ch_count++] = (uchar)ch; + /* + * For a normal key (with an ASCII value), add it; otherwise + * translate special key to escape sequence if possible. + */ + if (ch != 0xff) { + if (ch_count < max_chars) + output_ch[ch_count] = (uchar)ch; + ch_count++; + } else { + ch_count += input_keycode_to_ansi364(config, key, + output_ch, max_chars); } } + if (ch_count > max_chars) { + debug("%s: Output char buffer overflow size=%d, need=%d\n", + __func__, max_chars, ch_count); + return -1; + } + /* ok, so return keys */ return ch_count; } @@ -341,7 +412,7 @@ static int input_keycodes_to_ascii(struct input_config *config, int input_send_keycodes(struct input_config *config, int keycode[], int num_keycodes) { - char ch[num_keycodes]; + char ch[num_keycodes * ANSI_CHAR_MAX]; int count, i, same = 0; int is_repeat = 0; unsigned delay_ms; @@ -363,7 +434,7 @@ int input_send_keycodes(struct input_config *config, } count = input_keycodes_to_ascii(config, keycode, num_keycodes, - ch, is_repeat ? 0 : same); + ch, sizeof(ch), is_repeat ? 0 : same); for (i = 0; i < count; i++) input_queue_ascii(config, ch[i]); delay_ms = is_repeat ? @@ -371,7 +442,8 @@ int input_send_keycodes(struct input_config *config, config->repeat_delay_ms; config->next_repeat_ms = get_timer(0) + delay_ms; - return 0; + + return count; } int input_add_table(struct input_config *config, int left_keycode, diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 565ba6a383..a1dd7302bf 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -41,12 +41,12 @@ COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o -COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o +COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c new file mode 100644 index 0000000000..4070d4ea53 --- /dev/null +++ b/drivers/mmc/dw_mmc.c @@ -0,0 +1,385 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung + * Rajeshawari Shinde + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#define PAGE_SIZE 4096 + +static int dwmci_wait_reset(struct dwmci_host *host, u32 value) +{ + unsigned long timeout = 1000; + u32 ctrl; + + dwmci_writel(host, DWMCI_CTRL, value); + + while (timeout--) { + ctrl = dwmci_readl(host, DWMCI_CTRL); + if (!(ctrl & DWMCI_RESET_ALL)) + return 1; + } + return 0; +} + +static void dwmci_set_idma_desc(struct dwmci_idmac *idmac, + u32 desc0, u32 desc1, u32 desc2) +{ + struct dwmci_idmac *desc = idmac; + + desc->flags = desc0; + desc->cnt = desc1; + desc->addr = desc2; + desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac); +} + +static void dwmci_prepare_data(struct dwmci_host *host, + struct mmc_data *data) +{ + unsigned long ctrl; + unsigned int i = 0, flags, cnt, blk_cnt; + ulong data_start, data_end, start_addr; + ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks); + + + blk_cnt = data->blocks; + + dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET); + + data_start = (ulong)cur_idmac; + dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac); + + if (data->flags == MMC_DATA_READ) + start_addr = (unsigned int)data->dest; + else + start_addr = (unsigned int)data->src; + + do { + flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ; + flags |= (i == 0) ? DWMCI_IDMAC_FS : 0; + if (blk_cnt <= 8) { + flags |= DWMCI_IDMAC_LD; + cnt = data->blocksize * blk_cnt; + } else + cnt = data->blocksize * 8; + + dwmci_set_idma_desc(cur_idmac, flags, cnt, + start_addr + (i * PAGE_SIZE)); + + if(blk_cnt < 8) + break; + blk_cnt -= 8; + cur_idmac++; + i++; + } while(1); + + data_end = (ulong)cur_idmac; + flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN); + + ctrl = dwmci_readl(host, DWMCI_CTRL); + ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN; + dwmci_writel(host, DWMCI_CTRL, ctrl); + + ctrl = dwmci_readl(host, DWMCI_BMOD); + ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN; + dwmci_writel(host, DWMCI_BMOD, ctrl); + + dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize); + dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks); +} + +static int dwmci_set_transfer_mode(struct dwmci_host *host, + struct mmc_data *data) +{ + unsigned long mode; + + mode = DWMCI_CMD_DATA_EXP; + if (data->flags & MMC_DATA_WRITE) + mode |= DWMCI_CMD_RW; + + return mode; +} + +static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + int flags = 0, i; + unsigned int timeout = 100000; + u32 retry = 10000; + u32 mask, ctrl; + + while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { + if (timeout == 0) { + printf("Timeout on data busy\n"); + return TIMEOUT; + } + timeout--; + } + + dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); + + if (data) + dwmci_prepare_data(host, data); + + + dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); + + if (data) + flags = dwmci_set_transfer_mode(host, data); + + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) + return -1; + + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + flags |= DWMCI_CMD_ABORT_STOP; + else + flags |= DWMCI_CMD_PRV_DAT_WAIT; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + flags |= DWMCI_CMD_RESP_EXP; + if (cmd->resp_type & MMC_RSP_136) + flags |= DWMCI_CMD_RESP_LENGTH; + } + + if (cmd->resp_type & MMC_RSP_CRC) + flags |= DWMCI_CMD_CHECK_CRC; + + flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG); + + debug("Sending CMD%d\n",cmd->cmdidx); + + dwmci_writel(host, DWMCI_CMD, flags); + + for (i = 0; i < retry; i++) { + mask = dwmci_readl(host, DWMCI_RINTSTS); + if (mask & DWMCI_INTMSK_CDONE) { + if (!data) + dwmci_writel(host, DWMCI_RINTSTS, mask); + break; + } + } + + if (i == retry) + return TIMEOUT; + + if (mask & DWMCI_INTMSK_RTO) { + debug("Response Timeout..\n"); + return TIMEOUT; + } else if (mask & DWMCI_INTMSK_RE) { + debug("Response Error..\n"); + return -1; + } + + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = dwmci_readl(host, DWMCI_RESP3); + cmd->response[1] = dwmci_readl(host, DWMCI_RESP2); + cmd->response[2] = dwmci_readl(host, DWMCI_RESP1); + cmd->response[3] = dwmci_readl(host, DWMCI_RESP0); + } else { + cmd->response[0] = dwmci_readl(host, DWMCI_RESP0); + } + } + + if (data) { + do { + mask = dwmci_readl(host, DWMCI_RINTSTS); + if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) { + debug("DATA ERROR!\n"); + return -1; + } + } while (!(mask & DWMCI_INTMSK_DTO)); + + dwmci_writel(host, DWMCI_RINTSTS, mask); + + ctrl = dwmci_readl(host, DWMCI_CTRL); + ctrl &= ~(DWMCI_DMA_EN); + dwmci_writel(host, DWMCI_CTRL, ctrl); + } + + udelay(100); + + return 0; +} + +static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) +{ + u32 div, status; + int timeout = 10000; + unsigned long sclk; + + if (freq == host->clock) + return 0; + + /* + * If host->mmc_clk didn't define, + * then assume that host->bus_hz is source clock value. + * host->bus_hz should be set from user. + */ + if (host->mmc_clk) + sclk = host->mmc_clk(host->dev_index); + else if (host->bus_hz) + sclk = host->bus_hz; + else { + printf("Didn't get source clock value..\n"); + return -EINVAL; + } + + div = DIV_ROUND_UP(sclk, 2 * freq); + + dwmci_writel(host, DWMCI_CLKENA, 0); + dwmci_writel(host, DWMCI_CLKSRC, 0); + + dwmci_writel(host, DWMCI_CLKDIV, div); + dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | + DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); + + do { + status = dwmci_readl(host, DWMCI_CMD); + if (timeout-- < 0) { + printf("TIMEOUT error!!\n"); + return -ETIMEDOUT; + } + } while (status & DWMCI_CMD_START); + + dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE | + DWMCI_CLKEN_LOW_PWR); + + dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | + DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); + + timeout = 10000; + do { + status = dwmci_readl(host, DWMCI_CMD); + if (timeout-- < 0) { + printf("TIMEOUT error!!\n"); + return -ETIMEDOUT; + } + } while (status & DWMCI_CMD_START); + + host->clock = freq; + + return 0; +} + +static void dwmci_set_ios(struct mmc *mmc) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + u32 ctype; + + debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock); + + dwmci_setup_bus(host, mmc->clock); + switch (mmc->bus_width) { + case 8: + ctype = DWMCI_CTYPE_8BIT; + break; + case 4: + ctype = DWMCI_CTYPE_4BIT; + break; + default: + ctype = DWMCI_CTYPE_1BIT; + break; + } + + dwmci_writel(host, DWMCI_CTYPE, ctype); + + if (host->clksel) + host->clksel(host); +} + +static int dwmci_init(struct mmc *mmc) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + u32 fifo_size, fifoth_val; + + dwmci_writel(host, DWMCI_PWREN, 1); + + if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) { + debug("%s[%d] Fail-reset!!\n",__func__,__LINE__); + return -1; + } + + dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); + dwmci_writel(host, DWMCI_INTMASK, 0); + + dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF); + + dwmci_writel(host, DWMCI_IDINTEN, 0); + dwmci_writel(host, DWMCI_BMOD, 1); + + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); + if (host->fifoth_val) + fifoth_val = host->fifoth_val; + else + fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) | + TX_WMARK(fifo_size/2); + dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); + + dwmci_writel(host, DWMCI_CLKENA, 0); + dwmci_writel(host, DWMCI_CLKSRC, 0); + + return 0; +} + +int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk) +{ + struct mmc *mmc; + int err = 0; + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) { + printf("mmc malloc fail!\n"); + return -1; + } + + mmc->priv = host; + host->mmc = mmc; + + sprintf(mmc->name, "%s", host->name); + mmc->send_cmd = dwmci_send_cmd; + mmc->set_ios = dwmci_set_ios; + mmc->init = dwmci_init; + mmc->f_min = min_clk; + mmc->f_max = max_clk; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + + mmc->host_caps = host->caps; + + if (host->buswidth == 8) { + mmc->host_caps |= MMC_MODE_8BIT; + mmc->host_caps &= ~MMC_MODE_4BIT; + } else { + mmc->host_caps |= MMC_MODE_4BIT; + mmc->host_caps &= ~MMC_MODE_8BIT; + } + mmc->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_HC; + + err = mmc_register(mmc); + + return err; +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index a60cfe1cb0..5fbf956302 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -47,93 +47,6 @@ int __board_mmc_getcd(struct mmc *mmc) { int board_mmc_getcd(struct mmc *mmc)__attribute__((weak, alias("__board_mmc_getcd"))); -#ifdef CONFIG_MMC_BOUNCE_BUFFER -static int mmc_bounce_need_bounce(struct mmc_data *orig) -{ - ulong addr, len; - - if (orig->flags & MMC_DATA_READ) - addr = (ulong)orig->dest; - else - addr = (ulong)orig->src; - - if (addr % ARCH_DMA_MINALIGN) { - debug("MMC: Unaligned data destination address %08lx!\n", addr); - return 1; - } - - len = (ulong)(orig->blocksize * orig->blocks); - if (len % ARCH_DMA_MINALIGN) { - debug("MMC: Unaligned data destination length %08lx!\n", len); - return 1; - } - - return 0; -} - -static int mmc_bounce_buffer_start(struct mmc_data *backup, - struct mmc_data *orig) -{ - ulong origlen, len; - void *buffer; - - if (!orig) - return 0; - - if (!mmc_bounce_need_bounce(orig)) - return 0; - - memcpy(backup, orig, sizeof(struct mmc_data)); - - origlen = orig->blocksize * orig->blocks; - len = roundup(origlen, ARCH_DMA_MINALIGN); - buffer = memalign(ARCH_DMA_MINALIGN, len); - if (!buffer) { - puts("MMC: Error allocating MMC bounce buffer!\n"); - return 1; - } - - if (orig->flags & MMC_DATA_READ) { - orig->dest = buffer; - } else { - memcpy(buffer, orig->src, origlen); - orig->src = buffer; - } - - return 0; -} - -static void mmc_bounce_buffer_stop(struct mmc_data *backup, - struct mmc_data *orig) -{ - ulong len; - - if (!orig) - return; - - if (!mmc_bounce_need_bounce(backup)) - return; - - if (backup->flags & MMC_DATA_READ) { - len = backup->blocksize * backup->blocks; - memcpy(backup->dest, orig->dest, len); - free(orig->dest); - orig->dest = backup->dest; - } else { - free((void *)orig->src); - orig->src = backup->src; - } - - return; - -} -#else -static inline int mmc_bounce_buffer_start(struct mmc_data *backup, - struct mmc_data *orig) { return 0; } -static inline void mmc_bounce_buffer_stop(struct mmc_data *backup, - struct mmc_data *orig) { } -#endif - int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct mmc_data backup; @@ -141,10 +54,6 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) memset(&backup, 0, sizeof(backup)); - ret = mmc_bounce_buffer_start(&backup, data); - if (ret) - return ret; - #ifdef CONFIG_MMC_TRACE int i; u8 *ptr; @@ -196,7 +105,6 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) #else ret = mmc->send_cmd(mmc, cmd, data); #endif - mmc_bounce_buffer_stop(&backup, data); return ret; } diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index de43a85355..11ba532b0c 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -176,8 +176,8 @@ static int mmc_spi_request(struct mmc *mmc, struct mmc_cmd *cmd, u8 r1; int i; int ret = 0; - debug("%s:cmd%d %x %x %x\n", __func__, - cmd->cmdidx, cmd->resp_type, cmd->cmdarg, cmd->flags); + debug("%s:cmd%d %x %x\n", __func__, + cmd->cmdidx, cmd->resp_type, cmd->cmdarg); spi_claim_bus(spi); spi_cs_activate(spi); r1 = mmc_spi_sendcmd(mmc, cmd->cmdidx, cmd->cmdarg); diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index c80b41b192..109acbf623 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -42,6 +42,7 @@ #include #include #include +#include struct mxsmmc_priv { int id; @@ -95,28 +96,33 @@ static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data) static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) { uint32_t data_count = data->blocksize * data->blocks; - uint32_t cache_data_count; + uint32_t cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); int dmach; struct mxs_dma_desc *desc = priv->desc; + void *addr, *backup; + uint8_t flags; memset(desc, 0, sizeof(struct mxs_dma_desc)); desc->address = (dma_addr_t)desc; - if (data_count % ARCH_DMA_MINALIGN) - cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); - else - cache_data_count = data_count; - if (data->flags & MMC_DATA_READ) { priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; - priv->desc->cmd.address = (dma_addr_t)data->dest; + addr = data->dest; + flags = GEN_BB_WRITE; } else { priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; - priv->desc->cmd.address = (dma_addr_t)data->src; + addr = (void *)data->src; + flags = GEN_BB_READ; + } + + bounce_buffer_start(&addr, data_count, &backup, flags); + + priv->desc->cmd.address = (dma_addr_t)addr; + if (data->flags & MMC_DATA_WRITE) { /* Flush data to DRAM so DMA can pick them up */ - flush_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); + flush_dcache_range((uint32_t)addr, + (uint32_t)(addr) + cache_data_count); } /* Invalidate the area, so no writeback into the RAM races with DMA */ @@ -128,15 +134,19 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; mxs_dma_desc_append(dmach, priv->desc); - if (mxs_dma_go(dmach)) + if (mxs_dma_go(dmach)) { + bounce_buffer_stop(&addr, data_count, &backup, flags); return COMM_ERR; + } /* The data arrived into DRAM, invalidate cache over them */ if (data->flags & MMC_DATA_READ) { - invalidate_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); + invalidate_dcache_range((uint32_t)addr, + (uint32_t)(addr) + cache_data_count); } + bounce_buffer_stop(&addr, data_count, &backup, flags); + return 0; } diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c deleted file mode 100644 index 80c4445034..0000000000 --- a/drivers/mmc/pxa_mmc.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * (C) Copyright 2003 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "pxa_mmc.h" - -extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no); - -static block_dev_desc_t mmc_dev; - -block_dev_desc_t *mmc_get_dev(int dev) -{ - return ((block_dev_desc_t *) & mmc_dev); -} - -/* - * FIXME needs to read cid and csd info to determine block size - * and other parameters - */ -static uchar mmc_buf[MMC_BLOCK_SIZE]; -static uchar spec_ver; -static int mmc_ready = 0; -static int wide = 0; - -static uint32_t * -/****************************************************/ -mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) -/****************************************************/ -{ - static uint32_t resp[4], a, b, c; - uint32_t status; - int i; - - debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl, - cmdat | wide); - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF)) - ; - writel(cmd, MMC_CMD); - writel(argh, MMC_ARGH); - writel(argl, MMC_ARGL); - writel(cmdat | wide, MMC_CMDAT); - writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK); - writel(MMC_STRPCL_START_CLK, MMC_STRPCL); - while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES)) - ; - - status = readl(MMC_STAT); - debug("MMC status 0x%08x\n", status); - if (status & MMC_STAT_TIME_OUT_RESPONSE) { - return 0; - } - - /* Linux says: - * Did I mention this is Sick. We always need to - * discard the upper 8 bits of the first 16-bit word. - */ - a = (readl(MMC_RES) & 0xffff); - for (i = 0; i < 4; i++) { - b = (readl(MMC_RES) & 0xffff); - c = (readl(MMC_RES) & 0xffff); - resp[i] = (a << 24) | (b << 8) | (c >> 8); - a = c; - debug("MMC resp[%d] = %#08x\n", i, resp[i]); - } - - return resp; -} - -int -/****************************************************/ -mmc_block_read(uchar * dst, uint32_t src, int len) -/****************************************************/ -{ - ushort argh, argl; - ulong status; - - if (len == 0) { - return 0; - } - - debug("mmc_block_rd dst %p src %08x len %d\n", dst, src, len); - - argh = len >> 16; - argl = len & 0xffff; - - /* set block len */ - mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); - - /* send read command */ - argh = src >> 16; - argl = src & 0xffff; - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(0xffff, MMC_RDTO); - writel(1, MMC_NOB); - writel(len, MMC_BLKLEN); - mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl, - MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK | - MMC_CMDAT_DATA_EN); - - writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK); - while (len) { - if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) { -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - int i; - for (i = min(len, 32); i; i--) { - *dst++ = readb(MMC_RXFIFO); - len--; - } -#else - *dst++ = readb(MMC_RXFIFO); - len--; -#endif - } - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - } - writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) - ; - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - return 0; -} - -int -/****************************************************/ -mmc_block_write(ulong dst, uchar * src, int len) -/****************************************************/ -{ - ushort argh, argl; - ulong status; - - if (len == 0) { - return 0; - } - - debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong) src, len); - - argh = len >> 16; - argl = len & 0xffff; - - /* set block len */ - mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); - - /* send write command */ - argh = dst >> 16; - argl = dst & 0xffff; - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(1, MMC_NOB); - writel(len, MMC_BLKLEN); - mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl, - MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK | - MMC_CMDAT_DATA_EN); - - writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK); - while (len) { - if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) { - int i, bytes = min(32, len); - - for (i = 0; i < bytes; i++) { - writel(*src++, MMC_TXFIFO); - } - if (bytes < 32) { - writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF); - } - len -= bytes; - } - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - } - writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) - ; - writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE)) - ; - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - return 0; -} - -int -/****************************************************/ -pxa_mmc_read(long src, uchar * dst, int size) -/****************************************************/ -{ - ulong end, part_start, part_end, part_len, aligned_start, aligned_end; - ulong mmc_block_size, mmc_block_address; - - if (size == 0) { - return 0; - } - - if (!mmc_ready) { - printf("Please initial the MMC first\n"); - return -1; - } - - mmc_block_size = MMC_BLOCK_SIZE; - mmc_block_address = ~(mmc_block_size - 1); - - src -= CONFIG_SYS_MMC_BASE; - end = src + size; - part_start = ~mmc_block_address & src; - part_end = ~mmc_block_address & end; - aligned_start = mmc_block_address & src; - aligned_end = mmc_block_address & end; - - /* all block aligned accesses */ - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_start) { - part_len = mmc_block_size - part_start; - debug - ("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < - 0) { - return -1; - } - memcpy(dst, mmc_buf + part_start, part_len); - dst += part_len; - src += part_len; - } - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { - debug - ("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read((uchar *) (dst), src, mmc_block_size)) < 0) { - return -1; - } - } - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_end && src < end) { - debug - ("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { - return -1; - } - memcpy(dst, mmc_buf, part_end); - } - return 0; -} - -int -/****************************************************/ -pxa_mmc_write(uchar * src, uint32_t dst, int size) -/****************************************************/ -{ - ulong end, part_start, part_end, part_len, aligned_start, aligned_end; - ulong mmc_block_size, mmc_block_address; - - if (size == 0) { - return 0; - } - - if (!mmc_ready) { - printf("Please initial the MMC first\n"); - return -1; - } - - mmc_block_size = MMC_BLOCK_SIZE; - mmc_block_address = ~(mmc_block_size - 1); - - dst -= CONFIG_SYS_MMC_BASE; - end = dst + size; - part_start = ~mmc_block_address & dst; - part_end = ~mmc_block_address & end; - aligned_start = mmc_block_address & dst; - aligned_end = mmc_block_address & end; - - /* all block aligned accesses */ - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_start) { - part_len = mmc_block_size - part_start; - debug - ("ps src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < - 0) { - return -1; - } - memcpy(mmc_buf + part_start, src, part_len); - if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < - 0) { - return -1; - } - dst += part_len; - src += part_len; - } - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { - debug - ("al src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_write(dst, (uchar *) src, mmc_block_size)) < 0) { - return -1; - } - } - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_end && dst < end) { - debug - ("pe src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { - return -1; - } - memcpy(mmc_buf, src, part_end); - if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) { - return -1; - } - } - return 0; -} - -static ulong -/****************************************************/ -mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst) -/****************************************************/ -{ - int mmc_block_size = MMC_BLOCK_SIZE; - ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE; - - pxa_mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size); - return blkcnt; -} - -#ifdef __GNUC__ -#define likely(x) __builtin_expect(!!(x), 1) -#define unlikely(x) __builtin_expect(!!(x), 0) -#else -#define likely(x) (x) -#define unlikely(x) (x) -#endif - -#define UNSTUFF_BITS(resp,start,size) \ - ({ \ - const int __size = size; \ - const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1; \ - const int32_t __off = 3 - ((start) / 32); \ - const int32_t __shft = (start) & 31; \ - uint32_t __res; \ - \ - __res = resp[__off] >> __shft; \ - if (__size + __shft > 32) \ - __res |= resp[__off-1] << ((32 - __shft) % 32); \ - __res & __mask; \ - }) - -/* - * Given the decoded CSD structure, decode the raw CID to our CID structure. - */ -static void mmc_decode_cid(uint32_t * resp) -{ - if (IF_TYPE_SD == mmc_dev.if_type) { - /* - * SD doesn't currently have a version field so we will - * have to assume we can parse this. - */ - sprintf((char *)mmc_dev.vendor, - "Man %02x OEM %c%c \"%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, 112, 8), - UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, 96, 8), - UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, 80, 8), - UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, 64, 8), - UNSTUFF_BITS(resp, 8, 4), UNSTUFF_BITS(resp, 12, - 8) + 2000); - sprintf((char *)mmc_dev.revision, "%d.%d", - UNSTUFF_BITS(resp, 60, 4), UNSTUFF_BITS(resp, 56, 4)); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 24, 32)); - } else { - /* - * The selection of the format here is based upon published - * specs from sandisk and from what people have reported. - */ - switch (spec_ver) { - case 0: /* MMC v1.0 - v1.2 */ - case 1: /* MMC v1.4 */ - sprintf((char *)mmc_dev.vendor, - "Man %02x%02x%02x \"%c%c%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, - 112, - 8), - UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, - 96, 8), - UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, - 80, 8), - UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, - 64, 8), - UNSTUFF_BITS(resp, 56, 8), UNSTUFF_BITS(resp, - 48, 8), - UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8, - 4) + - 1997); - sprintf((char *)mmc_dev.revision, "%d.%d", - UNSTUFF_BITS(resp, 44, 4), UNSTUFF_BITS(resp, - 40, 4)); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 16, 24)); - break; - - case 2: /* MMC v2.0 - v2.2 */ - case 3: /* MMC v3.1 - v3.3 */ - case 4: /* MMC v4 */ - sprintf((char *)mmc_dev.vendor, - "Man %02x OEM %04x \"%c%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, - 104, - 16), - UNSTUFF_BITS(resp, 96, 8), UNSTUFF_BITS(resp, - 88, 8), - UNSTUFF_BITS(resp, 80, 8), UNSTUFF_BITS(resp, - 72, 8), - UNSTUFF_BITS(resp, 64, 8), UNSTUFF_BITS(resp, - 56, 8), - UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8, - 4) + - 1997); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 16, 32)); - sprintf((char *)mmc_dev.revision, "N/A"); - break; - - default: - printf("MMC card has unknown MMCA version %d\n", - spec_ver); - break; - } - } - printf("%s card.\nVendor: %s\nProduct: %s\nRevision: %s\n", - (IF_TYPE_SD == mmc_dev.if_type) ? "SD" : "MMC", mmc_dev.vendor, - mmc_dev.product, mmc_dev.revision); -} - -/* - * Given a 128-bit response, decode to our card CSD structure. - */ -static void mmc_decode_csd(uint32_t * resp) -{ - unsigned int mult, csd_struct; - - if (IF_TYPE_SD == mmc_dev.if_type) { - csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 0) { - printf("SD: unrecognised CSD structure version %d\n", - csd_struct); - return; - } - } else { - /* - * We only understand CSD structure v1.1 and v1.2. - * v1.2 has extra information in bits 15, 11 and 10. - */ - csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 1 && csd_struct != 2) { - printf("MMC: unrecognised CSD structure version %d\n", - csd_struct); - return; - } - - spec_ver = UNSTUFF_BITS(resp, 122, 4); - mmc_dev.if_type = IF_TYPE_MMC; - } - - mult = 1 << (UNSTUFF_BITS(resp, 47, 3) + 2); - mmc_dev.lba = (1 + UNSTUFF_BITS(resp, 62, 12)) * mult; - mmc_dev.blksz = 1 << UNSTUFF_BITS(resp, 80, 4); - - /* FIXME: The following just makes assumes that's the partition type -- should really read it */ - mmc_dev.part_type = PART_TYPE_DOS; - mmc_dev.dev = 0; - mmc_dev.lun = 0; - mmc_dev.type = DEV_TYPE_HARDDISK; - mmc_dev.removable = 0; - mmc_dev.block_read = mmc_bread; - - printf("Detected: %lu blocks of %lu bytes (%luMB) ", - mmc_dev.lba, - mmc_dev.blksz, - mmc_dev.lba * mmc_dev.blksz / (1024 * 1024)); -} - -int -/****************************************************/ -mmc_legacy_init(int verbose) -/****************************************************/ -{ - int retries, rc = -ENODEV; - uint32_t cid_resp[4]; - uint32_t *resp; - uint16_t rca = 0; - - /* Reset device interface type */ - mmc_dev.if_type = IF_TYPE_UNKNOWN; - -#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */ - writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA); -#else /* pxa2xx */ - writel(readl(CKEN) | CKEN12_MMC, CKEN); /* enable MMC unit clock */ -#endif - writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT); - writel(MMC_RES_TO_MAX, MMC_RESTO); - writel(MMC_SPI_DISABLE, MMC_SPI); - - /* reset */ - mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); - udelay(200000); - retries = 3; - while (retries--) { - resp = mmc_cmd(MMC_CMD_APP_CMD, 0, 0, MMC_CMDAT_R1); - if (!(resp[0] & 0x00000020)) { /* Card does not support APP_CMD */ - debug("Card does not support APP_CMD\n"); - break; - } - - /* Select 3.2-3.3V and 3.3-3.4V */ - resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000, - MMC_CMDAT_R3 | (retries < 2 ? 0 - : MMC_CMDAT_INIT)); - if (resp[0] & 0x80000000) { - mmc_dev.if_type = IF_TYPE_SD; - debug("Detected SD card\n"); - break; - } - udelay(200000); - } - - if (retries <= 0 || !(IF_TYPE_SD == mmc_dev.if_type)) { - debug("Failed to detect SD Card, trying MMC\n"); - resp = - mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, MMC_CMDAT_R3); - - retries = 10; - while (retries-- && resp && !(resp[0] & 0x80000000)) { - udelay(200000); - resp = - mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, - MMC_CMDAT_R3); - } - } - - /* try to get card id */ - resp = - mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, 0, MMC_CMDAT_R2 | MMC_CMDAT_BUSY); - if (resp) { - memcpy(cid_resp, resp, sizeof(cid_resp)); - - /* MMC exists, get CSD too */ - resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1); - if (IF_TYPE_SD == mmc_dev.if_type) - rca = ((resp[0] & 0xffff0000) >> 16); - resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2); - if (resp) { - mmc_decode_csd(resp); - rc = 0; - mmc_ready = 1; - } - - mmc_decode_cid(cid_resp); - } - - writel(0, MMC_CLKRT); /* 20 MHz */ - resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1); - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - if (IF_TYPE_SD == mmc_dev.if_type) { - resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1); - resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1); - wide = MMC_CMDAT_SD_4DAT; - } -#endif - - fat_register_device(&mmc_dev, 1); /* partitions start counting with 1 */ - - return rc; -} diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index b9782367e2..dc49d37f5c 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -83,7 +83,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | - SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR; + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_WAIT_SEND_CMD; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->version = sdhci_readw(host, SDHCI_HOST_VERSION); diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 2e3c408bc5..7845f873ac 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -82,8 +82,15 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, unsigned int start_addr) { unsigned int stat, rdy, mask, timeout, block = 0; +#ifdef CONFIG_MMC_SDMA + unsigned char ctrl; + ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + ctrl |= SDHCI_CTRL_SDMA; + sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL); +#endif - timeout = 10000; + timeout = 1000000; rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL; mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE; do { @@ -233,6 +240,9 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, if (!ret && data) ret = sdhci_transfer_data(host, data, start_addr); + if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD) + udelay(1000); + stat = sdhci_readl(host, SDHCI_INT_STATUS); sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS); if (!ret) { diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index cc57354755..7a1fcdd81f 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -32,6 +32,10 @@ COBJS-y += init.o COBJS-y += tgec.o COBJS-y += tgec_phy.o +# Soc have FMAN v3 with mEMAC +COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o +COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o + # SoC specific SERDES support COBJS-$(CONFIG_P1017) += p1023.o COBJS-$(CONFIG_P1023) += p1023.o @@ -40,6 +44,8 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o +COBJS-$(CONFIG_PPC_T4240) += t4240.o +COBJS-$(CONFIG_PPC_B4860) += b4860.o endif COBJS := $(COBJS-y) diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 2b616adb6e..82c787bf38 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Dave Liu * * This program is free software; you can redistribute it and/or @@ -28,6 +28,7 @@ #include #include #include +#include #include "fm.h" @@ -47,6 +48,28 @@ static int num_controllers; /* Configure the TBI for SGMII operation */ void dtsec_configure_serdes(struct fm_eth *priv) { +#ifdef CONFIG_SYS_FMAN_V3 + u32 value; + struct mii_dev bus; + bus.priv = priv->mac->phyregs; + + /* SGMII IF mode + AN enable */ + value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value); + + /* Dev ability according to SGMII specification */ + value = PHY_SGMII_DEV_ABILITY_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value); + + /* Adjust link timer for SGMII - + 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */ + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3); + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40); + + /* Restart AN */ + value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value); +#else struct dtsec *regs = priv->mac->base; struct tsec_mii_mng *phyregs = priv->mac->phyregs; @@ -60,15 +83,18 @@ void dtsec_configure_serdes(struct fm_eth *priv) TBIANA_SGMII_ACK); tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0, TBI_CR, TBICR_SETTINGS); +#endif } static void dtsec_init_phy(struct eth_device *dev) { struct fm_eth *fm_eth = dev->priv; - struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; +#ifndef CONFIG_SYS_FMAN_V3 + struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); +#endif if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) dtsec_configure_serdes(fm_eth); @@ -541,6 +567,10 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; +#ifdef CONFIG_SYS_FMAN_V3 + base = ®->memac[num].fm_memac; + phyregs = ®->memac[num].fm_memac_mdio; +#else /* Get the mac registers base address */ if (fm_eth->type == FM_ETH_1G_E) { base = ®->mac_1g[num].fm_dtesc; @@ -549,6 +579,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) base = ®->mac_10g[num].fm_10gec; phyregs = ®->mac_10g[num].fm_10gec_mdio; } +#endif /* alloc mac controller */ mac = malloc(sizeof(struct fsl_enet_mac)); @@ -559,10 +590,14 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) /* save the mac to fm_eth struct */ fm_eth->mac = mac; +#ifdef CONFIG_SYS_FMAN_V3 + init_memac(mac, base, phyregs, MAX_RXBUF_LEN); +#else if (fm_eth->type == FM_ETH_1G_E) init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN); else init_tgec(mac, base, phyregs, MAX_RXBUF_LEN); +#endif return 1; } diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 736b8b9582..ae389b8842 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -38,6 +38,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(1, 5), #endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(1, 6), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(1, 9), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(1, 10), +#endif #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1) FM_DTSEC_INFO_INITIALIZER(2, 1), #endif @@ -53,6 +62,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(2, 5), #endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(2, 6), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(2, 9), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(2, 10), +#endif #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c new file mode 100644 index 0000000000..32c7054e35 --- /dev/null +++ b/drivers/net/fm/memac.c @@ -0,0 +1,132 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* MAXFRM - maximum frame length */ +#define MAXFRM_MASK 0x0000ffff + +#include +#include +#include +#include +#include +#include + +#include "fm.h" + +static void memac_init_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + /* mask all interrupt */ + out_be32(®s->imask, IMASK_MASK_ALL); + + /* clear all events */ + out_be32(®s->ievent, IEVENT_CLEAR_ALL); + + /* set the max receive length */ + out_be32(®s->maxfrm, mac->max_rx_len & MAXFRM_MASK); + + /* multicast frame reception for the hash entry disable */ + out_be32(®s->hashtable_ctrl, 0); +} + +static void memac_enable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_disable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr) +{ + struct memac *regs = mac->base; + u32 mac_addr0, mac_addr1; + + /* + * if a station address of 0x12345678ABCD, perform a write to + * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB + */ + mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0]); + out_be32(®s->mac_addr_0, mac_addr0); + + mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff; + out_be32(®s->mac_addr_1, mac_addr1); +} + +static void memac_set_interface_mode(struct fsl_enet_mac *mac, + phy_interface_t type, int speed) +{ + /* Roy need more work here */ + + struct memac *regs = mac->base; + u32 if_mode, if_status; + + /* clear all bits relative with interface mode */ + if_mode = in_be32(®s->if_mode); + if_status = in_be32(®s->if_status); + + /* set interface mode */ + switch (type) { + case PHY_INTERFACE_MODE_GMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= IF_MODE_GMII; + break; + case PHY_INTERFACE_MODE_RGMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RG); + break; + case PHY_INTERFACE_MODE_RMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RM); + break; + case PHY_INTERFACE_MODE_SGMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= (IF_MODE_GMII); + break; + default: + break; + } + /* Enable automatic speed selection */ + if_mode |= IF_MODE_EN_AUTO; + + debug(" %s, if_mode = %x\n", __func__, if_mode); + debug(" %s, if_status = %x\n", __func__, if_status); + out_be32(®s->if_mode, if_mode); + return; +} + +void init_memac(struct fsl_enet_mac *mac, void *base, + void *phyregs, int max_rx_len) +{ + mac->base = base; + mac->phyregs = phyregs; + mac->max_rx_len = max_rx_len; + mac->init_mac = memac_init_mac; + mac->enable_mac = memac_enable_mac; + mac->disable_mac = memac_disable_mac; + mac->set_mac_addr = memac_set_mac_addr; + mac->set_if_mode = memac_set_interface_mode; +} diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c new file mode 100644 index 0000000000..ea6118b9b9 --- /dev/null +++ b/drivers/net/fm/memac_phy.c @@ -0,0 +1,150 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Andy Fleming + * Roy Zang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * Some part is taken from tsec.c + */ +#include +#include +#include +#include +#include +#include + +/* + * Write value to the PHY for this device to the register at regnum, waiting + * until the write is done before it returns. All PHY configuration has to be + * done through the TSEC1 MIIM regs + */ +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; /* Default to 10G interface */ + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the port and dev addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Write the value to the register */ + out_be32(®s->mdio_data, MDIO_DATA(value)); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +/* + * Reads from register regnum in the PHY for device dev, returning the value. + * Clears miimcom first. All PHY configuration has to be done through the + * TSEC1 MIIM regs + */ +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return in_be32(®s->mdio_data) & 0xffff; +} + +int memac_mdio_reset(struct mii_dev *bus) +{ + return 0; +} + +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate FM TGEC MDIO bus\n"); + return -1; + } + + bus->read = memac_mdio_read; + bus->write = memac_mdio_write; + bus->reset = memac_mdio_reset; + sprintf(bus->name, info->name); + + bus->priv = info->regs; + + return mdio_register(bus); +} diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c new file mode 100644 index 0000000000..48c530c915 --- /dev/null +++ b/drivers/net/fm/t4240.c @@ -0,0 +1,128 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2, + [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, + [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, + [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, + [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, + [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5, + [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6, + [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9, + [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10, + [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1, + [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1 || port == FM1_10GEC2) + && (is_serdes_configured(XAUI_FM1))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM2_10GEC1 || port == FM2_10GEC2) + && (is_serdes_configured(XAUI_FM2))) + return PHY_INTERFACE_MODE_XGMII; + +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 + /* handle RGMII first */ + if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + case FM2_DTSEC5: + case FM2_DTSEC6: + case FM2_DTSEC9: + case FM2_DTSEC10: + if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c index 471c5efea1..5e64dbdd17 100644 --- a/drivers/net/mcfmii.c +++ b/drivers/net/mcfmii.c @@ -315,13 +315,11 @@ int mcffec_miiphy_read(const char *devname, unsigned char addr, unsigned char re int mcffec_miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - short rdreg; /* register working value */ - #ifdef MII_DEBUG printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); #endif - rdreg = mii_send(mk_mii_write(addr, reg, value)); + mii_send(mk_mii_write(addr, reg, value)); #ifdef MII_DEBUG printf("0x%04x\n", value); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 0d46c96312..48ae16374d 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2011 Freescale Semiconductor, Inc. + * Copyright 2007-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -211,7 +211,7 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER static void fsl_pcie_boot_master(pit_t *pi) { /* configure inbound window for slave's u-boot image */ @@ -276,14 +276,18 @@ static void fsl_pcie_boot_master_release_slave(int port) release_addr = CONFIG_SYS_PCIE1_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#ifdef CONFIG_SYS_PCIE2_MEM_VIRT case 2: release_addr = CONFIG_SYS_PCIE2_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif +#ifdef CONFIG_SYS_PCIE3_MEM_VIRT case 3: release_addr = CONFIG_SYS_PCIE3_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif default: release_addr = 0; break; @@ -384,7 +388,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* see if we are a PCIe or PCI controller */ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER /* boot from PCIE --master */ char *s = getenv("bootmaster"); char pcie[6]; @@ -499,13 +503,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) } #ifndef CONFIG_PCI_NOSCAN - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8); - - /* Programming Interface (PCI_CLASS_PROG) - * 0 == pci host or pcie root-complex, - * 1 == pci agent or pcie end-point - */ - if (!temp8) { + if (!fsl_is_pci_agent(hose)) { debug(" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); @@ -543,12 +541,22 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) int fsl_is_pci_agent(struct pci_controller *hose) { - u8 prog_if; + u8 pcie_cap; pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); + if (pcie_cap == PCI_CAP_ID_EXP) { + u8 header_type; - return (prog_if == FSL_PROG_IF_AGENT); + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, + &header_type); + return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; + } else { + u8 prog_if; + + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + return (prog_if == FSL_PROG_IF_AGENT); + } } int fsl_pci_init_port(struct fsl_pci_info *pci_info, @@ -594,7 +602,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); hose->last_busno = hose->first_busno; -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER } else { /* boot from PCIE --master releases slave's core 0 */ char *s = getenv("bootmaster"); @@ -618,12 +626,10 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, void fsl_pci_config_unlock(struct pci_controller *hose) { pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); - u8 agent; u8 pcie_cap; u16 pbfr; - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent); - if (!agent) + if (!fsl_is_pci_agent(hose)) return; pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); @@ -660,10 +666,17 @@ int fsl_configure_pcie(struct fsl_pci_info *info, } #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1 + #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2 + #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3 + #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4 +#else #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 +#endif #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE @@ -743,34 +756,42 @@ int fsl_pcie_init_board(int busno) { struct fsl_pci_info pci_info; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; - u32 devdisr = in_be32(&gur->devdisr); + u32 devdisr; + u32 *addr; + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + addr = &gur->devdisr3; +#else + addr = &gur->devdisr; +#endif + devdisr = in_be32(addr); #ifdef CONFIG_PCIE1 SET_STD_PCIE_INFO(pci_info, 1); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE1); /* disable */ #endif #ifdef CONFIG_PCIE2 SET_STD_PCIE_INFO(pci_info, 2); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE3 SET_STD_PCIE_INFO(pci_info, 3); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE4 SET_STD_PCIE_INFO(pci_info, 4); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ #endif return busno; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 9f711519ed..345587be63 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -113,18 +113,21 @@ static void qe_sdma_init(void) * we just need to know what the SNUMs are for the threads. */ static u8 thread_snum[] = { +/* Evthreads 16-29 are not supported in MPC8309 */ +#if !defined(CONFIG_MPC8309) 0x04, 0x05, 0x0c, 0x0d, 0x14, 0x15, 0x1c, 0x1d, 0x24, 0x25, 0x2c, 0x2d, - 0x34, 0x35, 0x88, 0x89, - 0x98, 0x99, 0xa8, 0xa9, - 0xb8, 0xb9, 0xc8, 0xc9, - 0xd8, 0xd9, 0xe8, 0xe9, - 0x08, 0x09, 0x18, 0x19, - 0x28, 0x29, 0x38, 0x39, - 0x48, 0x49, 0x58, 0x59, - 0x68, 0x69, 0x78, 0x79, - 0x80, 0x81 + 0x34, 0x35, +#endif + 0x88, 0x89, 0x98, 0x99, + 0xa8, 0xa9, 0xb8, 0xb9, + 0xc8, 0xc9, 0xd8, 0xd9, + 0xe8, 0xe9, 0x08, 0x09, + 0x18, 0x19, 0x28, 0x29, + 0x38, 0x39, 0x48, 0x49, + 0x58, 0x59, 0x68, 0x69, + 0x78, 0x79, 0x80, 0x81 }; static void qe_snums_init(void) diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 654b5019eb..28319baf18 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -59,12 +59,6 @@ static void altera_jtag_serial_putc(char c) writel ((unsigned char)c, &jtag->data); } -static void altera_jtag_serial_puts(const char *s) -{ - while (*s != 0) - serial_putc (*s++); -} - static int altera_jtag_serial_tstc(void) { return ( readl (&jtag->control) & NIOS_JTAG_RRDY); @@ -91,7 +85,7 @@ static struct serial_device altera_jtag_serial_drv = { .stop = NULL, .setbrg = altera_jtag_serial_setbrg, .putc = altera_jtag_serial_putc, - .puts = altera_jtag_serial_puts, + .puts = default_serial_puts, .getc = altera_jtag_serial_getc, .tstc = altera_jtag_serial_tstc, }; diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 27550ed48d..118cd58ece 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -82,13 +82,6 @@ static void altera_serial_putc(char c) writel ((unsigned char)c, &uart->txdata); } -static void altera_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - static int altera_serial_tstc(void) { return (readl (&uart->status) & NIOS_UART_RRDY); @@ -107,7 +100,7 @@ static struct serial_device altera_serial_drv = { .stop = NULL, .setbrg = altera_serial_setbrg, .putc = altera_serial_putc, - .puts = altera_serial_puts, + .puts = default_serial_puts, .getc = altera_serial_getc, .tstc = altera_serial_tstc, }; diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 130303129e..c4d7432efc 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -86,12 +86,6 @@ static void atmel_serial_putc(char c) writel(c, &usart->thr); } -static void atmel_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static int atmel_serial_getc(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; @@ -113,7 +107,7 @@ static struct serial_device atmel_serial_drv = { .stop = NULL, .setbrg = atmel_serial_setbrg, .putc = atmel_serial_putc, - .puts = atmel_serial_puts, + .puts = default_serial_puts, .getc = atmel_serial_getc, .tstc = atmel_serial_tstc, }; diff --git a/drivers/serial/lpc32xx_hsuart.c b/drivers/serial/lpc32xx_hsuart.c index 02429b5541..7559916578 100644 --- a/drivers/serial/lpc32xx_hsuart.c +++ b/drivers/serial/lpc32xx_hsuart.c @@ -77,19 +77,13 @@ static int lpc32xx_serial_init(void) return 0; } -static void lpc32xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device lpc32xx_serial_drv = { .name = "lpc32xx_serial", .start = lpc32xx_serial_init, .stop = NULL, .setbrg = lpc32xx_serial_setbrg, .putc = lpc32xx_serial_putc, - .puts = lpc32xx_serial_puts, + .puts = default_serial_puts, .getc = lpc32xx_serial_getc, .tstc = lpc32xx_serial_tstc, }; diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 00a7114691..7e25797661 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -28,6 +28,8 @@ */ #include +#include +#include #include #include @@ -87,13 +89,6 @@ static void mcf_serial_putc(const char c) uart->utb = c; } -static void mcf_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int mcf_serial_getc(void) { volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); @@ -136,7 +131,7 @@ static struct serial_device mcf_serial_drv = { .stop = NULL, .setbrg = mcf_serial_setbrg, .putc = mcf_serial_putc, - .puts = mcf_serial_puts, + .puts = default_serial_puts, .getc = mcf_serial_getc, .tstc = mcf_serial_tstc, }; diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c index cb545c4065..85fc68a076 100644 --- a/drivers/serial/ns9750_serial.c +++ b/drivers/serial/ns9750_serial.c @@ -99,19 +99,6 @@ static void ns9750_serial_putc(const char c) CONSOLE) = c; } -/*********************************************************************** - * @Function: serial_puts - * @Return: n/a - * @Descr: writes non-zero string to the FIFO. - ***********************************************************************/ - -static void ns9750_serial_puts(const char *s) -{ - while (*s) { - serial_putc( *s++ ); - } -} - /*********************************************************************** * @Function: serial_getc * @Return: the character read @@ -215,7 +202,7 @@ static struct serial_device ns9750_serial_drv = { .stop = NULL, .setbrg = ns9750_serial_setbrg, .putc = ns9750_serial_putc, - .puts = ns9750_serial_puts, + .puts = default_serial_puts, .getc = ns9750_serial_getc, .tstc = ns9750_serial_tstc, }; diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c index 49bccf3a6c..4ca6ef0b25 100644 --- a/drivers/serial/opencores_yanu.c +++ b/drivers/serial/opencores_yanu.c @@ -161,14 +161,6 @@ static void oc_serial_putc(char c) writel((unsigned char)c, &uart->data); } -static void oc_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - - static int oc_serial_tstc(void) { unsigned status ; @@ -195,7 +187,7 @@ static struct serial_device oc_serial_drv = { .stop = NULL, .setbrg = oc_serial_setbrg, .putc = oc_serial_putc, - .puts = oc_serial_puts, + .puts = default_serial_puts, .getc = oc_serial_getc, .tstc = oc_serial_tstc, }; diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c index 423d26e678..c460229e05 100644 --- a/drivers/serial/s3c4510b_uart.c +++ b/drivers/serial/s3c4510b_uart.c @@ -199,12 +199,10 @@ static int s3c4510b_serial_getc(void) static void s3c4510b_serial_puts(const char *s) { - while (*s) { - serial_putc (*s++); - } + default_serial_puts(s); /* busy wait for tx complete */ - while ( !uart->m_stat.bf.txComplete); + while (!uart->m_stat.bf.txComplete); /* clear break */ uart->m_ctrl.bf.sendBreak = 0; diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index 9ab8a28d83..ea8d734a9e 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -166,19 +166,13 @@ static int s3c64xx_serial_tstc(void) return uart->UTRSTAT & 0x1; } -static void s3c64xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device s3c64xx_serial_drv = { .name = "s3c64xx_serial", .start = s3c64xx_serial_init, .stop = NULL, .setbrg = s3c64xx_serial_setbrg, .putc = s3c64xx_serial_putc, - .puts = s3c64xx_serial_puts, + .puts = default_serial_puts, .getc = s3c64xx_serial_getc, .tstc = s3c64xx_serial_tstc, }; diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 5bbf3aeb44..e0886d562e 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -26,16 +26,35 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices; static struct serial_device *serial_current; +/** + * serial_null() - Void registration routine of a serial driver + * + * This routine implements a void registration routine of a serial + * driver. The registration routine of a particular driver is aliased + * to this empty function in case the driver is not compiled into + * U-Boot. + */ static void serial_null(void) { } +/** + * serial_initfunc() - Forward declare of driver registration routine + * @name: Name of the real driver registration routine. + * + * This macro expands onto forward declaration of a driver registration + * routine, which is then used below in serial_initialize() function. + * The declaration is made weak and aliases to serial_null() so in case + * the driver is not compiled in, the function is still declared and can + * be used, but aliases to serial_null() and thus is optimized away. + */ #define serial_initfunc(name) \ void name(void) \ __attribute__((weak, alias("serial_null"))); @@ -94,6 +113,16 @@ serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); +/** + * serial_register() - Register serial driver with serial driver core + * @dev: Pointer to the serial driver structure + * + * This function registers the serial driver supplied via @dev with + * serial driver core, thus making U-Boot aware of it and making it + * available for U-Boot to use. On platforms that still require manual + * relocation of constant variables, relocation of the supplied structure + * is performed. + */ void serial_register(struct serial_device *dev) { #ifdef CONFIG_NEEDS_MANUAL_RELOC @@ -117,6 +146,15 @@ void serial_register(struct serial_device *dev) serial_devices = dev; } +/** + * serial_initialize() - Register all compiled-in serial port drivers + * + * This function registers all serial port drivers that are compiled + * into the U-Boot binary with the serial core, thus making them + * available to U-Boot to use. Lastly, this function assigns a default + * serial port to the serial core. That serial port is then used as a + * default output. + */ void serial_initialize(void) { mpc8xx_serial_initialize(); @@ -176,6 +214,13 @@ void serial_initialize(void) serial_assign(default_serial_console()->name); } +/** + * serial_stdio_init() - Register serial ports with STDIO core + * + * This function generates a proxy driver for each serial port driver. + * These proxy drivers then register with the STDIO core, making the + * serial drivers available as STDIO devices. + */ void serial_stdio_init(void) { struct stdio_dev dev; @@ -200,20 +245,38 @@ void serial_stdio_init(void) } } +/** + * serial_assign() - Select the serial output device by name + * @name: Name of the serial driver to be used as default output + * + * This function configures the serial output multiplexing by + * selecting which serial device will be used as default. In case + * the STDIO "serial" device is selected as stdin/stdout/stderr, + * the serial device previously configured by this function will be + * used for the particular operation. + * + * Returns 0 on success, negative on error. + */ int serial_assign(const char *name) { struct serial_device *s; for (s = serial_devices; s; s = s->next) { - if (strcmp(s->name, name) == 0) { - serial_current = s; - return 0; - } + if (strcmp(s->name, name)) + continue; + serial_current = s; + return 0; } - return 1; + return -EINVAL; } +/** + * serial_reinit_all() - Reinitialize all compiled-in serial ports + * + * This function reinitializes all serial ports that are compiled + * into U-Boot by calling their serial_start() functions. + */ void serial_reinit_all(void) { struct serial_device *s; @@ -222,60 +285,173 @@ void serial_reinit_all(void) s->start(); } +/** + * get_current() - Return pointer to currently selected serial port + * + * This function returns a pointer to currently selected serial port. + * The currently selected serial port is altered by serial_assign() + * function. + * + * In case this function is called before relocation or before any serial + * port is configured, this function calls default_serial_console() to + * determine the serial port. Otherwise, the configured serial port is + * returned. + * + * Returns pointer to the currently selected serial port on success, + * NULL on error. + */ static struct serial_device *get_current(void) { struct serial_device *dev; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { + if (!(gd->flags & GD_FLG_RELOC)) + dev = default_serial_console(); + else if (!serial_current) dev = default_serial_console(); + else + dev = serial_current; - /* We must have a console device */ - if (!dev) { + /* We must have a console device */ + if (!dev) { #ifdef CONFIG_SPL_BUILD - puts("Cannot find console\n"); - hang(); + puts("Cannot find console\n"); + hang(); #else - panic("Cannot find console\n"); + panic("Cannot find console\n"); #endif - } - } else - dev = serial_current; + } + return dev; } +/** + * serial_init() - Initialize currently selected serial port + * + * This function initializes the currently selected serial port. This + * usually involves setting up the registers of that particular port, + * enabling clock and such. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ int serial_init(void) { return get_current()->start(); } +/** + * serial_setbrg() - Configure baud-rate of currently selected serial port + * + * This function configures the baud-rate of the currently selected + * serial port. The baud-rate is retrieved from global data within + * the serial port driver. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ void serial_setbrg(void) { get_current()->setbrg(); } +/** + * serial_getc() - Read character from currently selected serial port + * + * This function retrieves a character from currently selected serial + * port. In case there is no character waiting on the serial port, + * this function will block and wait for the character to appear. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns the character on success, negative on error. + */ int serial_getc(void) { return get_current()->getc(); } +/** + * serial_tstc() - Test if data is available on currently selected serial port + * + * This function tests if one or more characters are available on + * currently selected serial port. This function never blocks. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns positive if character is available, zero otherwise. + */ int serial_tstc(void) { return get_current()->tstc(); } +/** + * serial_putc() - Output character via currently selected serial port + * @c: Single character to be output from the serial port. + * + * This function outputs a character via currently selected serial + * port. This character is passed to the serial port driver responsible + * for controlling the hardware. The hardware may still be in process + * of transmitting another character, therefore this function may block + * for a short amount of time. This function uses the get_current() + * call to determine which port is selected. + */ void serial_putc(const char c) { get_current()->putc(c); } +/** + * serial_puts() - Output string via currently selected serial port + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string via currently + * selected serial port. This function behaves as an accelerator + * in case the hardware can queue multiple characters for transfer. + * The whole string that is to be output is available to the function + * implementing the hardware manipulation. Transmitting the whole + * string may take some time, thus this function may block for some + * amount of time. This function uses the get_current() call to + * determine which port is selected. + */ void serial_puts(const char *s) { get_current()->puts(s); } +/** + * default_serial_puts() - Output string by calling serial_putc() in loop + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string by calling serial_putc() + * in a loop. Most drivers do not support queueing more than one byte for + * transfer, thus this function precisely implements their serial_puts(). + * + * To optimize the number of get_current() calls, this function only + * calls get_current() once and then directly accesses the putc() call + * of the &struct serial_device . + */ +void default_serial_puts(const char *s) +{ + struct serial_device *dev = get_current(); + while (*s) + dev->putc(*s++); +} + #if CONFIG_POST & CONFIG_SYS_POST_UART static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE; +/** + * uart_post_test() - Test the currently selected serial port using POST + * @flags: POST framework flags + * + * Do a loopback test of the currently selected serial port. This + * function is only useful in the context of the POST testing framwork. + * The serial port is firstly configured into loopback mode and then + * characters are sent through it. + * + * Returns 0 on success, value otherwise. + */ /* Mark weak until post/cpu/.../uart.c migrate over */ __weak int uart_post_test(int flags) diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c index 65473e8608..c292ed8756 100644 --- a/drivers/serial/serial_clps7111.c +++ b/drivers/serial/serial_clps7111.c @@ -112,20 +112,13 @@ static int clps7111_serial_getc(void) return IO_UARTDR1 & 0xff; } -static void clps7111_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device clps7111_serial_drv = { .name = "clps7111_serial", .start = clps7111_serial_init, .stop = NULL, .setbrg = clps7111_serial_setbrg, .putc = clps7111_serial_putc, - .puts = clps7111_serial_puts, + .puts = default_serial_puts, .getc = clps7111_serial_getc, .tstc = clps7111_serial_tstc, }; diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c index 6c075b5b91..9b9be44c52 100644 --- a/drivers/serial/serial_imx.c +++ b/drivers/serial/serial_imx.c @@ -214,20 +214,13 @@ static int imx_serial_tstc(void) return 1; } -static void imx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device imx_serial_drv = { .name = "imx_serial", .start = imx_serial_init, .stop = NULL, .setbrg = imx_serial_setbrg, .putc = imx_serial_putc, - .puts = imx_serial_puts, + .puts = default_serial_puts, .getc = imx_serial_getc, .tstc = imx_serial_tstc, }; diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c index c8b3658d47..09a3df4016 100644 --- a/drivers/serial/serial_ixp.c +++ b/drivers/serial/serial_ixp.c @@ -121,20 +121,13 @@ static int ixp_serial_getc(void) return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff; } -static void ixp_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device ixp_serial_drv = { .name = "ixp_serial", .start = ixp_serial_init, .stop = NULL, .setbrg = ixp_serial_setbrg, .putc = ixp_serial_putc, - .puts = ixp_serial_puts, + .puts = default_serial_puts, .getc = ixp_serial_getc, .tstc = ixp_serial_tstc, }; diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 60e8007201..8b1c974de9 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -102,13 +102,6 @@ static int ks8695_serial_tstc(void) return 0; } -static void ks8695_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int ks8695_serial_getc(void) { volatile struct ks8695uart *uartp = KS8695_UART_ADDR; @@ -124,7 +117,7 @@ static struct serial_device ks8695_serial_drv = { .stop = NULL, .setbrg = ks8695_serial_setbrg, .putc = ks8695_serial_putc, - .puts = ks8695_serial_puts, + .puts = default_serial_puts, .getc = ks8695_serial_getc, .tstc = ks8695_serial_tstc, }; diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c index fcab20280e..8abc476713 100644 --- a/drivers/serial/serial_lpc2292.c +++ b/drivers/serial/serial_lpc2292.c @@ -89,13 +89,6 @@ static int lpc2292_serial_getc(void) return GET8(U0RBR); } -static void lpc2292_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - /* Test if there is a byte to read */ static int lpc2292_serial_tstc(void) { @@ -108,7 +101,7 @@ static struct serial_device lpc2292_serial_drv = { .stop = NULL, .setbrg = lpc2292_serial_setbrg, .putc = lpc2292_serial_putc, - .puts = lpc2292_serial_puts, + .puts = default_serial_puts, .getc = lpc2292_serial_getc, .tstc = lpc2292_serial_tstc, }; diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index b0612f5aca..9227d64088 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -187,13 +187,6 @@ static int mxc_serial_tstc(void) return 1; } -static void mxc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. @@ -228,7 +221,7 @@ static struct serial_device mxc_serial_drv = { .stop = NULL, .setbrg = mxc_serial_setbrg, .putc = mxc_serial_putc, - .puts = mxc_serial_puts, + .puts = default_serial_puts, .getc = mxc_serial_getc, .tstc = mxc_serial_tstc, }; diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c index d30adc3183..44d7c500c7 100644 --- a/drivers/serial/serial_netarm.c +++ b/drivers/serial/serial_netarm.c @@ -182,20 +182,13 @@ static int netarm_serial_getc(void) return ch_uint & 0xff; } -static void netarm_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device netarm_serial_drv = { .name = "netarm_serial", .start = netarm_serial_init, .stop = NULL, .setbrg = netarm_serial_setbrg, .putc = netarm_serial_putc, - .puts = netarm_serial_puts, + .puts = default_serial_puts, .getc = netarm_serial_getc, .tstc = netarm_serial_tstc, }; diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 7db7b65c3f..b331be794b 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -179,13 +179,6 @@ static void pl01x_serial_putc(const char c) pl01x_putc (CONSOLE_PORT, c); } -static void pl01x_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int pl01x_serial_getc(void) { return pl01x_getc (CONSOLE_PORT); @@ -259,7 +252,7 @@ static struct serial_device pl01x_serial_drv = { .stop = NULL, .setbrg = pl01x_serial_setbrg, .putc = pl01x_serial_putc, - .puts = pl01x_serial_puts, + .puts = default_serial_puts, .getc = pl01x_serial_getc, .tstc = pl01x_serial_tstc, }; diff --git a/drivers/serial/serial_s3c44b0.c b/drivers/serial/serial_s3c44b0.c index a4428e0f47..9cae843088 100644 --- a/drivers/serial/serial_s3c44b0.c +++ b/drivers/serial/serial_s3c44b0.c @@ -209,20 +209,13 @@ static int s3c44b0_serial_getc(void) } } -static void s3c44b0_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device s3c44b0_serial_drv = { .name = "s3c44b0_serial", .start = s3c44b0_serial_init, .stop = NULL, .setbrg = s3c44b0_serial_setbrg, .putc = s3c44b0_serial_putc, - .puts = s3c44b0_serial_puts, + .puts = default_serial_puts, .getc = s3c44b0_serial_getc, .tstc = s3c44b0_serial_tstc, }; diff --git a/drivers/serial/serial_sa1100.c b/drivers/serial/serial_sa1100.c index c6b34db7c6..3c0f4c59fb 100644 --- a/drivers/serial/serial_sa1100.c +++ b/drivers/serial/serial_sa1100.c @@ -153,20 +153,13 @@ static int sa1100_serial_getc(void) #endif } -static void sa1100_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device sa1100_serial_drv = { .name = "sa1100_serial", .start = sa1100_serial_init, .stop = NULL, .setbrg = sa1100_serial_setbrg, .putc = sa1100_serial_putc, - .puts = sa1100_serial_puts, + .puts = default_serial_puts, .getc = sa1100_serial_getc, .tstc = sa1100_serial_tstc, }; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 1ddfc7d87f..3c931d0212 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -136,13 +136,6 @@ static void sh_serial_putc(const char c) serial_raw_putc(c); } -static void sh_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int sh_serial_tstc(void) { return serial_rx_fifo_level() ? 1 : 0; @@ -196,7 +189,7 @@ static struct serial_device sh_serial_drv = { .stop = NULL, .setbrg = sh_serial_setbrg, .putc = sh_serial_putc, - .puts = sh_serial_puts, + .puts = default_serial_puts, .getc = sh_serial_getc, .tstc = sh_serial_tstc, }; diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index a1ebd330d7..eb99e90bec 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -216,10 +216,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, return 1; } memcpy(buffer, cmd_buf, cmd_len); - if (cmd_len != 1) { - if (data_in == NULL) - memcpy(buffer + cmd_len, data_out, data_len); - } + if (data_in == NULL) + memcpy(buffer + cmd_len, data_out, data_len); break; case SPI_XFER_BEGIN | SPI_XFER_END: len = data_len; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 7b8f033b03..f54b408966 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -30,6 +30,18 @@ #include "ehci.h" +/* Check USB PHY clock valid */ +static int usb_phy_clk_valid(struct usb_ehci *ehci) +{ + if (!((in_be32(&ehci->control) & PHY_CLK_VALID) || + in_be32(&ehci->prictrl))) { + printf("USB PHY clock invalid!\n"); + return 0; + } else { + return 1; + } +} + /* * Create the appropriate control structures to manage * a new EHCI host controller. @@ -82,18 +94,16 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) udelay(1000); /* delay required for PHY Clk to appear */ #endif out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); + setbits_be32(&ehci->control, USB_EN); } else { -#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) - clrbits_be32(&ehci->control, UTMI_PHY_EN); setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); + clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN); udelay(1000); /* delay required for PHY Clk to appear */ -#endif + if (!usb_phy_clk_valid(ehci)) + return -EINVAL; out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI); } - /* Enable interface. */ - setbits_be32(&ehci->control, USB_EN); - out_be32(&ehci->prictrl, 0x0000000c); out_be32(&ehci->age_cnt_limit, 0x00000040); out_be32(&ehci->sictrl, 0x00000001); diff --git a/examples/standalone/mips64.lds b/examples/standalone/mips64.lds new file mode 100644 index 0000000000..9b27ef4769 --- /dev/null +++ b/examples/standalone/mips64.lds @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips") +OUTPUT_ARCH(mips) +SECTIONS +{ + .text : + { + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data*) } + + . = .; + _gp = ALIGN(16) + 0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + .sdata : { *(.sdata*) } + + . = ALIGN(4); + __bss_start = .; + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } + + _end = .; +} diff --git a/examples/standalone/sparc.lds b/examples/standalone/sparc.lds index 9733daa86b..646b80f2d3 100644 --- a/examples/standalone/sparc.lds +++ b/examples/standalone/sparc.lds @@ -46,6 +46,7 @@ SECTIONS { *(.data) } + . = ALIGN(4); __data_end = .; diff --git a/fs/Makefile b/fs/Makefile index 901e1894b6..b4db606236 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -22,6 +22,7 @@ # # +subdirs-$(CONFIG_CMD_CBFS) += cbfs subdirs-$(CONFIG_CMD_CRAMFS) := cramfs subdirs-$(CONFIG_CMD_EXT4) += ext4 ifndef CONFIG_CMD_EXT4 diff --git a/fs/cbfs/Makefile b/fs/cbfs/Makefile new file mode 100644 index 0000000000..2be8a6880b --- /dev/null +++ b/fs/cbfs/Makefile @@ -0,0 +1,43 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libcbfs.o + +COBJS-$(CONFIG_CMD_CBFS) := cbfs.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c new file mode 100644 index 0000000000..cae6d56db7 --- /dev/null +++ b/fs/cbfs/cbfs.c @@ -0,0 +1,339 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +enum cbfs_result file_cbfs_result; + +const char *file_cbfs_error(void) +{ + switch (file_cbfs_result) { + case CBFS_SUCCESS: + return "Success"; + case CBFS_NOT_INITIALIZED: + return "CBFS not initialized"; + case CBFS_BAD_HEADER: + return "Bad CBFS header"; + case CBFS_BAD_FILE: + return "Bad CBFS file"; + case CBFS_FILE_NOT_FOUND: + return "File not found"; + default: + return "Unknown"; + } +} + + +static const u32 good_magic = 0x4f524243; +static const u8 good_file_magic[] = "LARCHIVE"; + + +static int initialized; +static struct cbfs_header cbfs_header; +static struct cbfs_cachenode *file_cache; + +/* Do endian conversion on the CBFS header structure. */ +static void swap_header(struct cbfs_header *dest, struct cbfs_header *src) +{ + dest->magic = be32_to_cpu(src->magic); + dest->version = be32_to_cpu(src->version); + dest->rom_size = be32_to_cpu(src->rom_size); + dest->boot_block_size = be32_to_cpu(src->boot_block_size); + dest->align = be32_to_cpu(src->align); + dest->offset = be32_to_cpu(src->offset); +} + +/* Do endian conversion on a CBFS file header. */ +static void swap_file_header(struct cbfs_fileheader *dest, + const struct cbfs_fileheader *src) +{ + memcpy(&dest->magic, &src->magic, sizeof(dest->magic)); + dest->len = be32_to_cpu(src->len); + dest->type = be32_to_cpu(src->type); + dest->checksum = be32_to_cpu(src->checksum); + dest->offset = be32_to_cpu(src->offset); +} + +/* + * Given a starting position in memory, scan forward, bounded by a size, and + * find the next valid CBFS file. No memory is allocated by this function. The + * caller is responsible for allocating space for the new file structure. + * + * @param start The location in memory to start from. + * @param size The size of the memory region to search. + * @param align The alignment boundaries to check on. + * @param newNode A pointer to the file structure to load. + * @param used A pointer to the count of of bytes scanned through, + * including the file if one is found. + * + * @return 1 if a file is found, 0 if one isn't. + */ +static int file_cbfs_next_file(u8 *start, u32 size, u32 align, + struct cbfs_cachenode *newNode, u32 *used) +{ + struct cbfs_fileheader header; + + *used = 0; + + while (size >= align) { + const struct cbfs_fileheader *fileHeader = + (const struct cbfs_fileheader *)start; + u32 name_len; + u32 step; + + /* Check if there's a file here. */ + if (memcmp(good_file_magic, &(fileHeader->magic), + sizeof(fileHeader->magic))) { + *used += align; + size -= align; + start += align; + continue; + } + + swap_file_header(&header, fileHeader); + if (header.offset < sizeof(const struct cbfs_cachenode *) || + header.offset > header.len) { + file_cbfs_result = CBFS_BAD_FILE; + return -1; + } + newNode->next = NULL; + newNode->type = header.type; + newNode->data = start + header.offset; + newNode->data_length = header.len; + name_len = header.offset - sizeof(struct cbfs_cachenode *); + newNode->name = (char *)fileHeader + + sizeof(struct cbfs_cachenode *); + newNode->name_length = name_len; + newNode->checksum = header.checksum; + + step = header.len; + if (step % align) + step = step + align - step % align; + + *used += step; + return 1; + } + return 0; +} + +/* Look through a CBFS instance and copy file metadata into regular memory. */ +static void file_cbfs_fill_cache(u8 *start, u32 size, u32 align) +{ + struct cbfs_cachenode *cache_node; + struct cbfs_cachenode *newNode; + struct cbfs_cachenode **cache_tail = &file_cache; + + /* Clear out old information. */ + cache_node = file_cache; + while (cache_node) { + struct cbfs_cachenode *oldNode = cache_node; + cache_node = cache_node->next; + free(oldNode); + } + file_cache = NULL; + + while (size >= align) { + int result; + u32 used; + + newNode = (struct cbfs_cachenode *) + malloc(sizeof(struct cbfs_cachenode)); + result = file_cbfs_next_file(start, size, align, + newNode, &used); + + if (result < 0) { + free(newNode); + return; + } else if (result == 0) { + free(newNode); + break; + } + *cache_tail = newNode; + cache_tail = &newNode->next; + + size -= used; + start += used; + } + file_cbfs_result = CBFS_SUCCESS; +} + +/* Get the CBFS header out of the ROM and do endian conversion. */ +static int file_cbfs_load_header(uintptr_t end_of_rom, + struct cbfs_header *header) +{ + struct cbfs_header *header_in_rom; + + header_in_rom = (struct cbfs_header *)(uintptr_t) + *(u32 *)(end_of_rom - 3); + swap_header(header, header_in_rom); + + if (header->magic != good_magic || header->offset > + header->rom_size - header->boot_block_size) { + file_cbfs_result = CBFS_BAD_HEADER; + return 1; + } + return 0; +} + +void file_cbfs_init(uintptr_t end_of_rom) +{ + u8 *start_of_rom; + initialized = 0; + + if (file_cbfs_load_header(end_of_rom, &cbfs_header)) + return; + + start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size); + + file_cbfs_fill_cache(start_of_rom + cbfs_header.offset, + cbfs_header.rom_size, cbfs_header.align); + if (file_cbfs_result == CBFS_SUCCESS) + initialized = 1; +} + +const struct cbfs_header *file_cbfs_get_header(void) +{ + if (initialized) { + file_cbfs_result = CBFS_SUCCESS; + return &cbfs_header; + } else { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } +} + +const struct cbfs_cachenode *file_cbfs_get_first(void) +{ + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } else { + file_cbfs_result = CBFS_SUCCESS; + return file_cache; + } +} + +void file_cbfs_get_next(const struct cbfs_cachenode **file) +{ + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + file = NULL; + return; + } + + if (*file) + *file = (*file)->next; + file_cbfs_result = CBFS_SUCCESS; +} + +const struct cbfs_cachenode *file_cbfs_find(const char *name) +{ + struct cbfs_cachenode *cache_node = file_cache; + + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } + + while (cache_node) { + if (!strcmp(name, cache_node->name)) + break; + cache_node = cache_node->next; + } + if (!cache_node) + file_cbfs_result = CBFS_FILE_NOT_FOUND; + else + file_cbfs_result = CBFS_SUCCESS; + + return cache_node; +} + +const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom, + const char *name) +{ + u8 *start; + u32 size; + u32 align; + static struct cbfs_cachenode node; + + if (file_cbfs_load_header(end_of_rom, &cbfs_header)) + return NULL; + + start = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size); + size = cbfs_header.rom_size; + align = cbfs_header.align; + + while (size >= align) { + int result; + u32 used; + + result = file_cbfs_next_file(start, size, align, &node, &used); + + if (result < 0) + return NULL; + else if (result == 0) + break; + + if (!strcmp(name, node.name)) + return &node; + + size -= used; + start += used; + } + file_cbfs_result = CBFS_FILE_NOT_FOUND; + return NULL; +} + +const char *file_cbfs_name(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->name; +} + +u32 file_cbfs_size(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->data_length; +} + +u32 file_cbfs_type(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->type; +} + +long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer, + unsigned long maxsize) +{ + u32 size; + + size = file->data_length; + if (maxsize && size > maxsize) + size = maxsize; + + memcpy(buffer, file->data, size); + + file_cbfs_result = CBFS_SUCCESS; + return size; +} diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 80156c815f..4a60a2503e 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -567,15 +567,16 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, } /* Calculate short name checksum */ -static __u8 mkcksum(const char *str) +static __u8 mkcksum(const char name[8], const char ext[3]) { int i; __u8 ret = 0; - for (i = 0; i < 11; i++) { - ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i]; - } + for (i = 0; i < sizeof(name); i++) + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + name[i]; + for (i = 0; i < sizeof(ext); i++) + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + ext[i]; return ret; } @@ -678,7 +679,8 @@ static dir_entry *get_dentfromdir(fsdata *mydata, int startsect, return NULL; } #ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum(dentptr->name) == prevcksum) { + __u8 csum = mkcksum(dentptr->name, dentptr->ext); + if (dols && csum == prevcksum) { prevcksum = 0xffff; dentptr++; continue; @@ -946,13 +948,16 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer, for (i = 0; i < DIRENTSPERBLOCK; i++) { char s_name[14], l_name[VFAT_MAXLEN_BYTES]; + __u8 csum; l_name[0] = '\0'; if (dentptr->name[0] == DELETED_FLAG) { dentptr++; continue; } - if ((dentptr->attr & ATTR_VOLUME)) { + + csum = mkcksum(dentptr->name, dentptr->ext); + if (dentptr->attr & ATTR_VOLUME) { #ifdef CONFIG_SUPPORT_VFAT if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT && (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { @@ -1015,8 +1020,7 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer, goto exit; } #ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT && - mkcksum(dentptr->name) == prevcksum) { + else if (dols == LS_ROOT && csum == prevcksum) { prevcksum = 0xffff; dentptr++; continue; diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 5829adf1a1..4a1bda0a37 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -335,7 +335,7 @@ fill_dir_slot(fsdata *mydata, dir_entry **dentptr, const char *l_name) /* Get short file name and checksum value */ strncpy(s_name, (*dentptr)->name, 16); - checksum = mkcksum(s_name); + checksum = mkcksum((*dentptr)->name, (*dentptr)->ext); do { memset(slotptr, 0x00, sizeof(dir_slot)); diff --git a/helper.mk b/helper.mk new file mode 100644 index 0000000000..79a1da01e3 --- /dev/null +++ b/helper.mk @@ -0,0 +1,64 @@ +# +# Copyright (C) 2012 Marek Vasut +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +######################################################################### + +## +# make_u_boot_list - Generate contents of u_boot_list section +# 1: The name of the resulting file (usually u-boot.lst) +# 2: Files to analyze for possible u_boot_list entries +# +# This function generates the contents of the u_boot_list section, +# including all the border symbols for it's subsections. The operation +# of this function is as follows, numbering goes per lines: +# +# 1) Dump the ELF header sections from all files supplied via $(2) +# 2) Filter out all other stuff that does not belong into .u_boot_list +# section. +# 3) Fix up the lines so that the resulting output is is in format +# ".u_boot_list.*". +# 4) Remove the last .something$, since that only contains the name +# of the variable to be put into a subsection. This name is irelevant +# for generation of border symbols, thus of no interest, remove it. +# 5) Take each line and for every dot "." in that line, print the whole +# line until that dot "." . This is important so that we have all +# parent border symbols generated as well. +# 6) Load every line and firstly append "\a" at the end and print the +# line. Next, append "@" at the end and print the line. Finally, +# append "~" at the end of line. This will make sense in conjunction +# with 6) and 7). +# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because +# with this, the "\a" symbol is first and "~" symbol is last. Any +# other symbols fall inbetween. Symbols like "@", which marks the +# end of current line (representing current section) and ".", which +# means the line continues and thus represents subsection. +# 8) With such ordering, all lines ending with "\a" will float at the +# begining of all lines with the same prefix. Thus it is easy to +# replace "\a" with __start and make it the __start border symbol. +# Very similarly for "~", which will be always at the bottom and so +# can be replaced by "__end" and made into the __end border symbol. +# Finally, every line ending with "@" symbol will be transformed +# into " *(SORT(${line}*)); " format, which in the linker parlance +# will allow it to trap all symbols relevant to the subsection. +# +define make_u_boot_list +$(1): $(2) + $(OBJDUMP) -h $(2) | \ + sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \ + -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \ + -e 's/\.[^\.]\+$$$$//' \ + -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \ + sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \ + LC_COLLATE=C sort -u | \ + sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\ + -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\ + -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1) +endef diff --git a/include/bouncebuf.h b/include/bouncebuf.h new file mode 100644 index 0000000000..31021c5b85 --- /dev/null +++ b/include/bouncebuf.h @@ -0,0 +1,87 @@ +/* + * Generic bounce buffer implementation + * + * Copyright (C) 2012 Marek Vasut + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __INCLUDE_BOUNCEBUF_H__ +#define __INCLUDE_BOUNCEBUF_H__ + +/* + * GEN_BB_READ -- Data are read from the buffer eg. by DMA hardware. + * The source buffer is copied into the bounce buffer (if unaligned, otherwise + * the source buffer is used directly) upon start() call, then the operation + * requiring the aligned transfer happens, then the bounce buffer is lost upon + * stop() call. + */ +#define GEN_BB_READ (1 << 0) +/* + * GEN_BB_WRITE -- Data are written into the buffer eg. by DMA hardware. + * The source buffer starts in an undefined state upon start() call, then the + * operation requiring the aligned transfer happens, then the bounce buffer is + * copied into the destination buffer (if unaligned, otherwise destination + * buffer is used directly) upon stop() call. + */ +#define GEN_BB_WRITE (1 << 1) +/* + * GEN_BB_RW -- Data are read and written into the buffer eg. by DMA hardware. + * The source buffer is copied into the bounce buffer (if unaligned, otherwise + * the source buffer is used directly) upon start() call, then the operation + * requiring the aligned transfer happens, then the bounce buffer is copied + * into the destination buffer (if unaligned, otherwise destination buffer is + * used directly) upon stop() call. + */ +#define GEN_BB_RW (GEN_BB_READ | GEN_BB_WRITE) + +#ifdef CONFIG_BOUNCE_BUFFER +/** + * bounce_buffer_start() -- Start the bounce buffer session + * data: pointer to buffer to be aligned + * len: length of the buffer + * backup: pointer to backup buffer (the original value is stored here if + * needed + * flags: flags describing the transaction, see above. + */ +int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags); +/** + * bounce_buffer_stop() -- Finish the bounce buffer session + * data: pointer to buffer that was aligned + * len: length of the buffer + * backup: pointer to backup buffer (the original value is stored here if + * needed + * flags: flags describing the transaction, see above. + */ +int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags); +#else +static inline int bounce_buffer_start(void **data, size_t len, void **backup, + uint8_t flags) +{ + return 0; +} + +static inline int bounce_buffer_stop(void **data, size_t len, void **backup, + uint8_t flags) +{ + return 0; +} +#endif + +#endif diff --git a/include/cbfs.h b/include/cbfs.h new file mode 100644 index 0000000000..6ea3f35119 --- /dev/null +++ b/include/cbfs.h @@ -0,0 +1,181 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CBFS_H +#define __CBFS_H + +#include +#include + +enum cbfs_result { + CBFS_SUCCESS = 0, + CBFS_NOT_INITIALIZED, + CBFS_BAD_HEADER, + CBFS_BAD_FILE, + CBFS_FILE_NOT_FOUND +}; + +enum cbfs_filetype { + CBFS_TYPE_STAGE = 0x10, + CBFS_TYPE_PAYLOAD = 0x20, + CBFS_TYPE_OPTIONROM = 0x30, + CBFS_TYPE_BOOTSPLASH = 0x40, + CBFS_TYPE_RAW = 0x50, + CBFS_TYPE_VSA = 0x51, + CBFS_TYPE_MBI = 0x52, + CBFS_TYPE_MICROCODE = 0x53, + CBFS_COMPONENT_CMOS_DEFAULT = 0xaa, + CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa +}; + +struct cbfs_header { + u32 magic; + u32 version; + u32 rom_size; + u32 boot_block_size; + u32 align; + u32 offset; + u32 pad[2]; +} __packed; + +struct cbfs_fileheader { + u8 magic[8]; + u32 len; + u32 type; + u32 checksum; + u32 offset; +} __packed; + +struct cbfs_cachenode { + struct cbfs_cachenode *next; + u32 type; + void *data; + u32 data_length; + char *name; + u32 name_length; + u32 checksum; +} __packed; + +extern enum cbfs_result file_cbfs_result; + +/* + * Return a string describing the most recent error condition. + * + * @return A pointer to the constant string. + */ +const char *file_cbfs_error(void); + +/* + * Initialize the CBFS driver and load metadata into RAM. + * + * @param end_of_rom Points to the end of the ROM the CBFS should be read + * from. + */ +void file_cbfs_init(uintptr_t end_of_rom); + +/* + * Get the header structure for the current CBFS. + * + * @return A pointer to the constant structure, or NULL if there is none. + */ +const struct cbfs_header *file_cbfs_get_header(void); + +/* + * Get a handle for the first file in CBFS. + * + * @return A handle for the first file in CBFS, NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_get_first(void); + +/* + * Get a handle to the file after this one in CBFS. + * + * @param file A pointer to the handle to advance. + */ +void file_cbfs_get_next(const struct cbfs_cachenode **file); + +/* + * Find a file with a particular name in CBFS. + * + * @param name The name to search for. + * + * @return A handle to the file, or NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_find(const char *name); + + +/***************************************************************************/ +/* All of the functions below can be used without first initializing CBFS. */ +/***************************************************************************/ + +/* + * Find a file with a particular name in CBFS without using the heap. + * + * @param end_of_rom Points to the end of the ROM the CBFS should be read + * from. + * @param name The name to search for. + * + * @return A handle to the file, or NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom, + const char *name); + +/* + * Get the name of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The name of the file, NULL on error. + */ +const char *file_cbfs_name(const struct cbfs_cachenode *file); + +/* + * Get the size of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The size of the file, zero on error. + */ +u32 file_cbfs_size(const struct cbfs_cachenode *file); + +/* + * Get the type of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The type of the file, zero on error. + */ +u32 file_cbfs_type(const struct cbfs_cachenode *file); + +/* + * Read a file from CBFS into RAM + * + * @param file A handle to the file to read. + * @param buffer Where to read it into memory. + * + * @return If positive or zero, the number of characters read. If negative, an + * error occurred. + */ +long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer, + unsigned long maxsize); + +#endif /* __CBFS_H */ diff --git a/include/command.h b/include/command.h index 1f06aa1819..10bc2606c7 100644 --- a/include/command.h +++ b/include/command.h @@ -28,6 +28,7 @@ #define __COMMAND_H #include +#include #ifndef NULL #define NULL 0 @@ -61,8 +62,6 @@ struct cmd_tbl_s { typedef struct cmd_tbl_s cmd_tbl_t; -extern cmd_tbl_t __u_boot_cmd_start; -extern cmd_tbl_t __u_boot_cmd_end; #if defined(CONFIG_CMD_RUN) extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); @@ -153,9 +152,6 @@ int cmd_process(int flag, int argc, char * const argv[], #define CMD_FLAG_REPEAT 0x0001 /* repeat last command */ #define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */ -#define Struct_Section __attribute__((unused, section(".u_boot_cmd"), \ - aligned(4))) - #ifdef CONFIG_AUTO_COMPLETE # define _CMD_COMPLETE(x) x, #else @@ -167,18 +163,22 @@ int cmd_process(int flag, int argc, char * const argv[], # define _CMD_HELP(x) #endif -#define U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \ - {#name, maxargs, rep, cmd, usage, _CMD_HELP(help) _CMD_COMPLETE(comp)} +#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp) \ + { #_name, _maxargs, _rep, _cmd, _usage, \ + _CMD_HELP(_help) _CMD_COMPLETE(_comp) } -#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \ - U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL) +#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, NULL) -#define U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \ - cmd_tbl_t __u_boot_cmd_##name Struct_Section = \ - U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) +#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ + ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp); -#define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \ - U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL) +#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL) #if defined(CONFIG_NEEDS_MANUAL_RELOC) void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h index 1db7cec209..12828c67e3 100644 --- a/include/config_phylib_all_drivers.h +++ b/include/config_phylib_all_drivers.h @@ -23,6 +23,7 @@ #define CONFIG_PHY_NATSEMI #define CONFIG_PHY_LXT #define CONFIG_PHY_ATHEROS +#define CONFIG_PHY_SMSC #ifdef CONFIG_PHYLIB_10G #define CONFIG_PHY_TERANETICS diff --git a/include/configs/BMW.h b/include/configs/BMW.h deleted file mode 100644 index 633e9bd69f..0000000000 --- a/include/configs/BMW.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the CU824 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC824X 1 -#define CONFIG_MPC8245 1 -#define CONFIG_BMW 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOOTCOMMAND "bootm FF820000" /* autoboot command */ -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Only use Onboard TSOP-16MB device */ -#define DOC_PASSIVE_PROBE 1 -#define CONFIG_SYS_DOC_SUPPORT_2000 1 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1 -#define CONFIG_SYS_DOC_SHORT_TIMEOUT 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - - -#if 0 -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank on RCS#0 */ -#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF800000 /* FLASH bank on RCS#1 */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM } - -/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the - * reset vector is actually located at FFB00100, but the 8245 - * takes care of us. - */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - - /* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 64 MB of (S)DRAM */ - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_SYS_ETH_DEV_FN 0x7800 -#define CONFIG_SYS_ETH_IOBASE 0x00104000 - - /* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 0xf -#define CONFIG_SYS_ROMFAL 0x1f -#define CONFIG_SYS_DBUS_SIZE 0x3 - - /* Bit-field values for MCCR2. - */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */ - - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 0 /* FIXME: was 192 */ - - /* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ - - /* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval FIXME: was 2 */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 3 /* SDMODE Burst length */ -#define CONFIG_SYS_ACTORW 0xa /* FIXME was 2 */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -#define CONFIG_SYS_PGMAX 0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/ - -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */ - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_PCI 1 /* Include PCI support */ -#undef CONFIG_PCI_PNP - -/* PCI Memory space(s) */ -#define PCI_MEM_SPACE1_START 0x80000000 -#define PCI_MEM_SPACE2_START 0xfd000000 - -/* ROM Spaces */ -#include "../board/bmw/bmw.h" - -/* BAT configuration */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/* - * Warining: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1 -#define CONFIG_ENV_ADDR 0x7c004000 /* right at the start of NVRAM */ -#define CONFIG_ENV_SIZE 0x1ff0 /* Size of the Environment - 8K */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index fc226f1984..e102c365c4 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -480,6 +480,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 81f219c9b5..b58b6f638c 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -349,6 +349,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index f98a66bf24..092fcf0641 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -318,6 +318,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index d6e9b2381d..38837cab46 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -312,6 +312,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index c0035e65de..dae9b8c079 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -353,6 +353,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 5084cccad8..cceee96742 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -366,6 +366,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h new file mode 100644 index 0000000000..6c96111a7e --- /dev/null +++ b/include/configs/M54418TWR.h @@ -0,0 +1,448 @@ +/* + * Configuation settings for the Freescale MCF54418 TWR board. + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M54418TWR_H +#define _M54418TWR_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5441x /* define processor family */ +#define CONFIG_M54418 /* define processor type */ +#define CONFIG_M54418TWR /* M54418TWR board */ + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_UBI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NAND_YAFFS +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* + * NAND FLASH + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_JFFS2_NAND +#define CONFIG_NAND_FSL_NFC +#define CONFIG_SYS_NAND_BASE 0xFC0FC000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 2 +#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN +#define CONFIG_SYS_TX_ETH_BUFFER 2 +#define CONFIG_HAS_ETH1 + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define CONFIG_SYS_FEC1_PINMUX 0 +#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE +#define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_SYS_FEC0_PHYADDR 0 +#define CONFIG_SYS_FEC1_PHYADDR 1 + +#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ + +#ifdef CONFIG_SYS_NAND_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ + "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ + "-(jffs2) console=ttyS0,115200" +#else +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ + __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ + __stringify(CONFIG_IPADDR) " ip=" \ + __stringify(CONFIG_IPADDR) ":" \ + __stringify(CONFIG_SERVERIP)":" \ + __stringify(CONFIG_GATEWAYIP)": " \ + __stringify(CONFIG_NETMASK) \ + "::eth0:off:rw console=ttyS0,115200" +#endif + +#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_IPADDR 192.168.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 + +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SYS_FEC_BUF_USE_SRAM +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +#ifndef CONFIG_SYS_DISCOVER_PHY +#define FECDUPLEX FULL +#define FECSPEED _100BASET +#define LINKSTATUS 1 +#else +#define LINKSTATUS 0 +#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#endif +#endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54418TWR + +#if defined(CONFIG_CF_SBF) +/* ST Micro serial flash */ +#define CONFIG_SYS_LOAD_ADDR2 0x40010007 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "sbfhdr=sbfhdr.bin\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${sbfhdr};" \ + "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ + "upd=run load; run prog\0" \ + "prog=sf probe 0:1 1000000 3;" \ + "sf erase 0 40000;" \ + "sf write ${loadaddr} 0 40000;" \ + "save\0" \ + "" +#elif defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot};\0" \ + "upd=run load; run prog\0" \ + "prog=nand device 0;" \ + "nand erase 0 40000;" \ + "nb_update ${loadaddr} ${filesize};" \ + "save\0" \ + "" +#else +#define CONFIG_SYS_UBOOT_END 0x3FFFF +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off mram" " ;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" +#endif + +/* Realtime clock */ +#undef CONFIG_MCFRTC +#define CONFIG_RTC_MCFRRTC +#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#undef CONFIG_FSL_I2C +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +/* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* DSPI and Serial Flash */ +#define CONFIG_CF_SPI +#define CONFIG_CF_DSPI +#define CONFIG_SERIAL_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_SYS_SBFHDR_SIZE 0x7 +#ifdef CONFIG_CMD_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_ATMEL + +# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(1)) +# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) +# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) +#endif + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 2048 /* 2048 KB */ + +/* HUSH */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +/* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) +#define CONFIG_SYS_DRAM_TEST + +#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SERIAL_BOOT +#endif + +#if defined(CONFIG_SERIAL_BOOT) +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif + +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) +/* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +/* Reserve 256 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (256 << 10) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_MRAM 1 +#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ +#define CONFIG_ENV_SIZE 0x1000 +#endif + +#if defined(CONFIG_CF_SBF) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SPI_CS 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#if defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x80000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif +#undef CONFIG_ENV_OVERWRITE + +/* FLASH organization */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE + +#undef CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI + +#define CONFIG_FLASH_CFI_DRIVER 1 +/* Max size that the board might have */ +#define CONFIG_SYS_FLASH_SIZE 0x1000000 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* "Real" (hardware) sectors protection */ +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } +#else +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 0 +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_OFFSET (0x800000) +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=m54418twr.nand" + +#define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \ + "7m(kernel)," \ + "-(rootfs)" + +#endif + +#ifdef CONFIG_CMD_UBI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts command */ +#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */ +#define CONFIG_RBTREE +#define MTDIDS_DEFAULT "nand0=NAND" +#define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \ + "-(ubi)" +#endif +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + +#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 12) + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 16MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ + + /* Flash */ +#define CONFIG_SYS_CS0_BASE 0x00000000 +#define CONFIG_SYS_CS0_MASK 0x000F0101 +#define CONFIG_SYS_CS0_CTRL 0x00001D60 + +#endif /* _M54418TWR_H */ diff --git a/include/configs/MBX.h b/include/configs/MBX.h index e8d0cd775b..7145cc4446 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -276,6 +276,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index a1fbece8e8..95a1885ace 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -30,6 +30,7 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 604938d8b1..074e01f0fa 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -629,6 +629,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 9f462f4b5e..f4184fcd8f 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -318,6 +318,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index 98e7a42e5f..cf184e74ab 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -36,6 +36,10 @@ #define CONFIG_PCIE4 #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index d6f2f5ceb8..53979dddf2 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -33,6 +33,10 @@ #define CONFIG_MMC #define CONFIG_PCIE3 +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 8625f76290..7018d7a322 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -37,6 +37,10 @@ #define CONFIG_SYS_FSL_RAID_ENGINE #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 9befacbaba..868a0b8044 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -329,6 +329,7 @@ */ #if 1 +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index b215c2d642..3595200c45 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -314,6 +314,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 8ffb014fe8..563abea95e 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -249,6 +249,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index f8bcf0fae2..67ab1e962b 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -335,6 +335,7 @@ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 671d52168a..e2b22f0bae 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -329,6 +329,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h deleted file mode 100644 index d448bf6650..0000000000 --- a/include/configs/SBC8540.h +++ /dev/null @@ -1,428 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao - * - * (C) Copyright 2004 Wind River Systems Inc . - * Added support for Wind River SBC8540 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * sbc8540 board configuration file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_66 -#define CONFIG_PCI_66 -#endif - -#define TSEC_DEBUG - -/* - * High Level Configuration Options - */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ - -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 - - -#define CONFIG_CPM2 1 /* has CPM2 */ - -#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */ -#define CONFIG_MPC8540 1 - -#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_PCI /* pci ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_ENV_OVERWRITE - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you need a flash-boot image(u-boot.bin), if so undef this. - */ -#undef CONFIG_RAM_AS_FLASH - -#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ - #define CONFIG_SYS_CLK_FREQ 66000000 /* sysclk for MPC85xx */ -#else - #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ - defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ - defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) -#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." -#endif - -#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD - -#if defined(CONFIG_MPC85xx_REV1) -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#endif - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */ - -#undef CONFIG_CLOCKS_IN_MHZ - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ -#else /* Boot from real Flash */ - #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ -#endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* local bus definitions */ -#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7 - -#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */ -#define CONFIG_SYS_OR2_PRELIM 0x00000000 - -#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1 - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ -#else - #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ -#endif -#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1 - -#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ -#if 1 - #define CONFIG_SYS_OR5_PRELIM 0xff000ff7 -#else - #define CONFIG_SYS_OR5_PRELIM 0xff0000f0 -#endif - -#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7 -#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_SYS_LBC_LSRT 0x20000000 -#define CONFIG_SYS_LBC_MRTPR 0x20000000 -#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723 -#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 -#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 - -/* just hijack the MOT BCSR def for SBC8560 misc devices */ -#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) -/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#if 0 -#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */ -#else -#define CONFIG_SYS_NS16550_CLK 264000000 /* get_bus_freq(0) */ -#endif - -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#if 0 -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000) -#else -/* SBC8540 uses internal COMM controller */ -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004500) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004600) -#endif - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000 -#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000 -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ - -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define CONFIG_MII 1 /* MII PHY management */ -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" - - -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ - - #undef CONFIG_ETHER_NONE /* define if ether on something else */ - #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ - #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ - - #if (CONFIG_ETHER_INDEX == 2) - /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ - #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CONFIG_SYS_CPMFCR_RAMTYPE 0 - #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) - - #elif (CONFIG_ETHER_INDEX == 3) - /* need more definitions here for FE3 */ - #endif /* CONFIG_ETHER_INDEX */ - - #define CONFIG_MII /* MII PHY management */ - #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - /* - * GPIO pins used for bit-banged MII communications - */ - #define MDIO_PORT 2 /* Port C */ - #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) - #define MDC_DECLARE MDIO_DECLARE - - #define MDIO_ACTIVE (iop->pdir |= 0x00400000) - #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) - #define MDIO_READ ((iop->pdat & 0x00400000) != 0) - - #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - - #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - - #define MIIDELAY udelay(1) - -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if 0 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if 0 -/* XXX This doesn't work and I don't want to fix it */ -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) - #define CONFIG_SYS_RAMBOOT -#else - #undef CONFIG_SYS_RAMBOOT -#endif -#endif - -/* Environment */ -#if !defined(CONFIG_SYS_RAMBOOT) - #if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_ENV_IS_NOWHERE - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000) - #define CONFIG_ENV_SIZE 0x2000 - #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */ - #endif -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" -/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" -#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_CMD_MII -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SBC8540=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/*Note: change below for your network setting!!! */ -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c -#endif - -#define CONFIG_SERVERIP YourServerIP -#define CONFIG_IPADDR YourTargetIP -#define CONFIG_GATEWAYIP YourGatewayIP -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_HOSTNAME SBC8560 -#define CONFIG_ROOTPATH "YourRootPath" -#define CONFIG_BOOTFILE "YourImageName" - -#endif /* __CONFIG_H */ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index cffeb11447..72ea217e54 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -303,6 +303,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_LED 1 /* LED for ide supported */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h new file mode 100644 index 0000000000..76b3ca6898 --- /dev/null +++ b/include/configs/T4240QDS.h @@ -0,0 +1,35 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * T4240 QDS board configuration file + */ +#define CONFIG_T4240QDS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_T4240 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "t4qds.h" diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 4176c7fe56..623cb6636b 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -343,6 +343,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index a01b4a6bef..9fac5d15c7 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -335,6 +335,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 1da4acd455..932f158b2c 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -331,6 +331,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 1c054f0bc6..eb08de2814 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -320,6 +320,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 46066dfb4c..bf3a76ca8c 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -322,6 +322,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index dd2da9410c..43dd64356c 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -324,6 +324,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 95bc4d964c..e7fd2db28e 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -359,6 +359,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 487666ce55..81e1b91ee7 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -323,6 +323,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index e8b77ea71a..ed496a1825 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -324,6 +324,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 334b7ecc17..1559336ec1 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -327,6 +327,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 1e2ad40d91..61dcf627d7 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -328,6 +328,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index a13c16aa5a..7d0ae99cb1 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -356,6 +356,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 7df76fbf02..7941631b51 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -341,6 +341,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index af0b714e11..6764b4749c 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -132,7 +132,7 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MXS_MMC #endif diff --git a/include/configs/atc.h b/include/configs/atc.h index 75f950b94c..538a167528 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -482,6 +482,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index 566c42b6be..41ff00847a 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -302,6 +302,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 0e89242db7..3df085be51 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -92,6 +92,9 @@ #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION /* Experimental */ +#define CONFIG_CMD_CBFS +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE /*----------------------------------------------------------------------- * Video Configuration diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 8489d16dda..c41b039996 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -76,10 +76,6 @@ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ - #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h new file mode 100644 index 0000000000..b36e892cbe --- /dev/null +++ b/include/configs/km/km8309-common.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2012 Keymile AG + * Gerlando Falauto + * + * Based on km8321-common.h, see respective copyright notice for credits + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_KM8309_COMMON_H +#define __CONFIG_KM8309_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ +#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ + +#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" +#define CONFIG_CMD_DIAG 1 + +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" + +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 + +#define CONFIG_MISC_INIT_R + +/* + * System IO Config + */ +/* 0x14000180 SICR_1 */ +#define CONFIG_SYS_SICRL (0 \ + | SICR_1_UART1_UART1RTS \ + | SICR_1_I2C_CKSTOP \ + | SICR_1_IRQ_A_IRQ \ + | SICR_1_IRQ_B_IRQ \ + | SICR_1_GPIO_A_GPIO \ + | SICR_1_GPIO_B_GPIO \ + | SICR_1_GPIO_C_GPIO \ + | SICR_1_GPIO_D_GPIO \ + | SICR_1_GPIO_E_GPIO \ + | SICR_1_GPIO_F_GPIO \ + | SICR_1_USB_A_UART2S \ + | SICR_1_USB_B_UART2RTS \ + | SICR_1_FEC1_FEC1 \ + | SICR_1_FEC2_FEC2 \ + ) + +/* 0x00080400 SICR_2 */ +#define CONFIG_SYS_SICRH (0 \ + | SICR_2_FEC3_FEC3 \ + | SICR_2_HDLC1_A_HDLC1 \ + | SICR_2_ELBC_A_LA \ + | SICR_2_ELBC_B_LCLK \ + | SICR_2_HDLC2_A_HDLC2 \ + | SICR_2_USB_D_GPIO \ + | SICR_2_PCI_PCI \ + | SICR_2_HDLC1_B_HDLC1 \ + | SICR_2_HDLC1_C_HDLC1 \ + | SICR_2_HDLC2_B_GPIO \ + | SICR_2_HDLC2_C_HDLC2 \ + | SICR_2_QUIESCE_B \ + ) + +/* GPR_1 */ +#define CONFIG_SYS_GPR1 0x50008060 + +#define CONFIG_SYS_GP1DIR 0x00000000 +#define CONFIG_SYS_GP1ODR 0x00000000 +#define CONFIG_SYS_GP2DIR 0xFF000000 +#define CONFIG_SYS_GP2ODR 0x00000000 + +/* + * Hardware Reset Configuration Word + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ + HRCWL_DDR_TO_SCB_CLK_2X1 | \ + HRCWL_CSB_TO_CLKIN_2X1 | \ + HRCWL_CORE_TO_CSB_2X1 | \ + HRCWL_CE_PLL_VCO_DIV_2 | \ + HRCWL_CE_TO_PLL_1X3) + +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_AGENT | \ + HRCWH_PCI_ARBITER_DISABLE | \ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE | \ + HRCWH_SW_WATCHDOG_DISABLE | \ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_NORMAL) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_32_BE | \ + SDRAM_CFG_SREN | \ + SDRAM_CFG_HSE) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ODT_RD_NEVER | \ + CSCONFIG_ODT_WR_ONLY_CURRENT | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) + +#define CONFIG_SYS_DDR_MODE 0x47860242 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP 0x80000000 +#define CONFIG_SYS_LCRR_EADC 0x00010000 +#define CONFIG_SYS_LCRR_CLKDIV 0x00000002 + +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +/* + * MMU Setup + */ +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_KM8309_COMMON_H */ diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h index 580b72f4e7..8ad6fc3a33 100644 --- a/include/configs/km/km8321-common.h +++ b/include/configs/km/km8321-common.h @@ -115,7 +115,7 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 877d8418c0..a9823d6ef9 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -169,9 +169,15 @@ #define UEC_VERBOSE_DEBUG 1 #ifdef CONFIG_UEC_ETH1 +#if defined(CONFIG_MPC8309) +#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 +#else #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#endif #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 3a882e396b..4898fb60f4 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -154,16 +154,20 @@ /* I2C */ #define CONFIG_CMD_I2C #define CONFIG_SH_I2C 1 +#define CONFIG_SH_I2C_8BIT #define CONFIG_HARD_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS (2) +#define CONFIG_SYS_MAX_I2C_BUS (5) #define CONFIG_SYS_I2C_MODULE #define CONFIG_SYS_I2C_SPEED (100000) /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE (0x7F) #define CONFIG_SH_I2C_DATA_HIGH (4) #define CONFIG_SH_I2C_DATA_LOW (5) -#define CONFIG_SH_I2C_CLOCK (41666666) +#define CONFIG_SH_I2C_CLOCK (104000000) /* 104 MHz */ #define CONFIG_SH_I2C_BASE0 (0xE6820000) #define CONFIG_SH_I2C_BASE1 (0xE6822000) +#define CONFIG_SH_I2C_BASE2 (0xE6824000) +#define CONFIG_SH_I2C_BASE3 (0xE6826000) +#define CONFIG_SH_I2C_BASE4 (0xE6828000) #endif /* __KZM9G_H */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ed64960879..5886a155dc 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -130,7 +130,8 @@ #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index ab86053039..df4978161e 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -494,6 +494,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index bdbb82065e..b49ec8c7dd 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -135,7 +135,7 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_GENERIC_MMC #define CONFIG_MXS_MMC #endif diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 035a1b6798..aa681f0628 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -30,6 +30,7 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index e188f029c7..2916c710e4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -142,7 +142,7 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MXS_MMC #endif diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 6e8d8e9d57..9c948c5473 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -77,7 +77,8 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_SYS_MMC_BASE 0xF0000000 #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 24c53633f0..5a15af6b6a 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -245,7 +245,8 @@ #define RTC 1 /* enable 32KHz osc */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index b8b970504f..5bc7b0d1d5 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -28,14 +28,10 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ -#define CONFIG_QEMU_MIPS 1 +#define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_QEMU_MIPS #define CONFIG_MISC_INIT_R -/*IP address is default used by Qemu*/ -#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */ -#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address */ - #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ #define CONFIG_BAUDRATE 115200 @@ -74,31 +70,31 @@ #define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 -#define CONFIG_DRIVER_NE2000_BASE (0xb4000300) +#define CONFIG_DRIVER_NE2000_BASE 0xb4000300 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 (0xb40003f8) -#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 0xb40003f8 +#define CONFIG_CONS_INDEX 1 #define CONFIG_CMD_IDE #define CONFIG_DOS_PARTITION #define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_ATA_IDE0_OFFSET (0x1f0) -#define CONFIG_SYS_ATA_IDE1_OFFSET (0x170) -#define CONFIG_SYS_ATA_DATA_OFFSET (0) -#define CONFIG_SYS_ATA_REG_OFFSET (0) -#define CONFIG_SYS_ATA_BASE_ADDR (0xb4000000) +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 -#define CONFIG_SYS_IDE_MAXDEVICE (4) +#define CONFIG_SYS_IDE_MAXDEVICE 4 /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ /* Monitor Command Prompt */ #if defined(CONFIG_SYS_LITTLE_ENDIAN) @@ -111,9 +107,12 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN 128*1024 @@ -125,9 +124,11 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ +/* Cached addr */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_MEMTEST_START 0x80100000 #define CONFIG_SYS_MEMTEST_END 0x80800000 @@ -135,8 +136,8 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ - /* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) @@ -146,11 +147,11 @@ #define CONFIG_SYS_FLASH_BASE 0xbfc00000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) /* Address and size of Primary Environment Sector */ @@ -160,8 +161,6 @@ #define MEM_SIZE 128 -#undef CONFIG_MEMSIZE_IN_BYTES - #define CONFIG_LZMA /*----------------------------------------------------------------------- diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h new file mode 100644 index 0000000000..82647e2b1f --- /dev/null +++ b/include/configs/qemu-mips64.h @@ -0,0 +1,175 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for qemu-mips64 target. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS64 /* MIPS64 CPU core */ +#define CONFIG_QEMU_MIPS +#define CONFIG_MISC_INIT_R + +#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addmisc=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate} " \ + "panic=1\0" \ + "bootfile=/tftpboot/vmlinux\0" \ + "load=tftp ffffffff80500000 ${u-boot}\0" \ + "" + +#define CONFIG_BOOTCOMMAND "bootp;bootelf" + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_DHCP + +#define CONFIG_DRIVER_NE2000 +#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 115200 +#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 +#define CONFIG_CONS_INDEX 1 + +#define CONFIG_CMD_IDE +#define CONFIG_DOS_PARTITION + +#define CONFIG_SYS_IDE_MAXBUS 2 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 + +#define CONFIG_SYS_IDE_MAXDEVICE 4 + +#define CONFIG_CMD_RARP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mips64el # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips64 # " +#endif + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +#define CONFIG_SYS_MALLOC_LEN 128*1024 + +#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 + +#define CONFIG_SYS_MHZ 132 + +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) + +#define CONFIG_SYS_HZ 1000 + +/* Cached addr */ +#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 + +#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 +#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +/* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +/* We boot from this flash, selected with dip switch */ +#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) + +/* Address and size of Primary Environment Sector */ +#define CONFIG_ENV_SIZE 0x8000 + +#define CONFIG_ENV_OVERWRITE 1 + +#define MEM_SIZE 128 + +#define CONFIG_LZMA + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 4f246510fe..072bd9c7ee 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -317,6 +317,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h deleted file mode 100644 index 46d60985d3..0000000000 --- a/include/configs/sbc8560.h +++ /dev/null @@ -1,459 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao - * - * (C) Copyright 2004 Wind River Systems Inc . - * Added support for Wind River SBC8560 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * sbc8560 board configuration file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_66 -#define CONFIG_PCI_66 -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ - -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 - - -#define CONFIG_CPM2 1 /* has CPM2 */ -#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ -#define CONFIG_MPC8560 1 - -/* XXX flagging this as something I might want to delete */ -#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_PCI /* pci ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_ENV_OVERWRITE - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you need a flash-boot image(u-boot.bin), if so undef this. - */ -#undef CONFIG_RAM_AS_FLASH - -#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ - #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */ -#else - #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ - defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ - defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) -#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." -#endif - -#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD - -#if defined(CONFIG_MPC85xx_REV1) -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#endif - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */ - -#undef CONFIG_CLOCKS_IN_MHZ - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ -#else /* Boot from real Flash */ - #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ -#endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* local bus definitions */ -#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7 - -#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */ -#define CONFIG_SYS_OR2_PRELIM 0x00000000 - -#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1 - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ -#else - #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ -#endif -#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1 - -#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ -#if 1 - #define CONFIG_SYS_OR5_PRELIM 0xff000ff7 -#else - #define CONFIG_SYS_OR5_PRELIM 0xff0000f0 -#endif - -#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7 -#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_SYS_LBC_LSRT 0x20000000 -#define CONFIG_SYS_LBC_MRTPR 0x20000000 -#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723 -#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 -#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 - -/* just hijack the MOT BCSR def for SBC8560 misc devices */ -#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) -/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */ -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000 -#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000 -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#ifdef CONFIG_TSEC_ENET - -#ifndef CONFIG_MII -#define CONFIG_MII 1 /* MII PHY management */ -#endif -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0x19 -#define TSEC2_PHY_ADDR 0x1a -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ - - #undef CONFIG_ETHER_NONE /* define if ether on something else */ - #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ - #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ - - #if (CONFIG_ETHER_INDEX == 2) - /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ - #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CONFIG_SYS_CPMFCR_RAMTYPE 0 - #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) - - #elif (CONFIG_ETHER_INDEX == 3) - /* need more definitions here for FE3 */ - #endif /* CONFIG_ETHER_INDEX */ - - #define CONFIG_MII /* MII PHY management */ - #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - /* - * GPIO pins used for bit-banged MII communications - */ - #define MDIO_PORT 2 /* Port C */ - #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) - #define MDC_DECLARE MDIO_DECLARE - - #define MDIO_ACTIVE (iop->pdir |= 0x00400000) - #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) - #define MDIO_READ ((iop->pdat & 0x00400000) != 0) - - #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - - #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - - #define MIIDELAY udelay(1) - -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if 0 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if 0 -/* XXX This doesn't work and I don't want to fix it */ -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) - #define CONFIG_SYS_RAMBOOT -#else - #undef CONFIG_SYS_RAMBOOT -#endif -#endif - -/* Environment */ -#if !defined(CONFIG_SYS_RAMBOOT) - #if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_ENV_IS_NOWHERE - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000) - #define CONFIG_ENV_SIZE 0x2000 - #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */ - #endif -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" -/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_CMD_MII -#endif - -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SBC8560=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -/* You can compile in a MAC address and your custom net settings by using - * the following syntax. Your board should be marked with the assigned - * MAC addresses directly on it. - * - * #define CONFIG_ETHADDR de:ad:be:ef:00:00 - * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s! - * #define CONFIG_SERVERIP - * #define CONFIG_IPADDR - * #define CONFIG_GATEWAYIP - * #define CONFIG_NETMASK - */ - -#define CONFIG_HOSTNAME SBC8560 -#define CONFIG_ROOTPATH "/home/ppc" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=sbc8560.dtb\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index ae197018b8..c50832c1e0 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -23,19 +23,28 @@ /* * High Level Configuration Options */ -#define CONFIG_SUVD3 /* SUVD3 board specific */ -#define CONFIG_HOSTNAME suvd3 -#define CONFIG_KM_BOARD_NAME "suvd3" +/* This needs to be set prior to including km/km83xx-common.h */ #define CONFIG_SYS_TEXT_BASE 0xF0000000 +#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ +#define CONFIG_HOSTNAME suvd3 +#define CONFIG_KM_BOARD_NAME "suvd3" /* include common defines/options for all 8321 Keymile boards */ #include "km/km8321-common.h" +#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ +#define CONFIG_HOSTNAME kmvect1 +#define CONFIG_KM_BOARD_NAME "kmvect1" +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" +#else +#error Supported boards are: SUVD3, KMVECT1 +#endif #define CONFIG_SYS_APP1_BASE 0xA0000000 -#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 -#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 91686d66a7..2b24997f80 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -359,6 +359,8 @@ #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h new file mode 100644 index 0000000000..d58c24c4aa --- /dev/null +++ b/include/configs/t4qds.h @@ -0,0 +1,875 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Corenet DS style board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +#define CONFIG_CMD_REGINFO + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E6500 +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + + + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#if 0 +#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ +#endif +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif + +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ + FTIM0_NOR_TEADC(0x01) | \ + FTIM0_NOR_TEAHC(0x20)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ + FTIM2_NOR_TCH(0x0E) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#ifdef CONFIG_PHYS_64BIT +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) +#else +#define QIXIS_BASE_PHYS QIXIS_BASE +#endif + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C2_OFFSET 0x118100 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ + +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull +#else +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 +#endif +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ +#define XFI_CARD_PORT2_PHY_ADDR 0x2 +#define XFI_CARD_PORT3_PHY_ADDR 0x3 +#define XFI_CARD_PORT4_PHY_ADDR 0x4 +#define QSGMII_CARD_PHY_ADDR 0x5 +#define FM1_10GEC1_PHY_ADDR 0x6 +#define FM1_10GEC2_PHY_ADDR 0x7 +#define FM2_10GEC1_PHY_ADDR 0x8 +#define FM2_10GEC2_PHY_ADDR 0x9 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* For emulation this causes u-boot to jump to the start of the proof point + app code automatically */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index bc69c1ea2b..c1bfe31e46 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -170,7 +170,8 @@ #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 8c8fb5ae69..450c98bd3a 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -331,6 +331,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 4bb96cc1ab..c2c0d1d243 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -329,6 +329,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/dwmmc.h b/include/dwmmc.h new file mode 100644 index 0000000000..c8b1d408e2 --- /dev/null +++ b/include/dwmmc.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __DWMMC_HW_H +#define __DWMMC_HW_H + +#include +#include + +#define DWMCI_CTRL 0x000 +#define DWMCI_PWREN 0x004 +#define DWMCI_CLKDIV 0x008 +#define DWMCI_CLKSRC 0x00C +#define DWMCI_CLKENA 0x010 +#define DWMCI_TMOUT 0x014 +#define DWMCI_CTYPE 0x018 +#define DWMCI_BLKSIZ 0x01C +#define DWMCI_BYTCNT 0x020 +#define DWMCI_INTMASK 0x024 +#define DWMCI_CMDARG 0x028 +#define DWMCI_CMD 0x02C +#define DWMCI_RESP0 0x030 +#define DWMCI_RESP1 0x034 +#define DWMCI_RESP2 0x038 +#define DWMCI_RESP3 0x03C +#define DWMCI_MINTSTS 0x040 +#define DWMCI_RINTSTS 0x044 +#define DWMCI_STATUS 0x048 +#define DWMCI_FIFOTH 0x04C +#define DWMCI_CDETECT 0x050 +#define DWMCI_WRTPRT 0x054 +#define DWMCI_GPIO 0x058 +#define DWMCI_TCMCNT 0x05C +#define DWMCI_TBBCNT 0x060 +#define DWMCI_DEBNCE 0x064 +#define DWMCI_USRID 0x068 +#define DWMCI_VERID 0x06C +#define DWMCI_HCON 0x070 +#define DWMCI_UHS_REG 0x074 +#define DWMCI_BMOD 0x080 +#define DWMCI_PLDMND 0x084 +#define DWMCI_DBADDR 0x088 +#define DWMCI_IDSTS 0x08C +#define DWMCI_IDINTEN 0x090 +#define DWMCI_DSCADDR 0x094 +#define DWMCI_BUFADDR 0x098 +#define DWMCI_DATA 0x200 + +/* Interrupt Mask register */ +#define DWMCI_INTMSK_ALL 0xffffffff +#define DWMCI_INTMSK_RE (1 << 1) +#define DWMCI_INTMSK_CDONE (1 << 2) +#define DWMCI_INTMSK_DTO (1 << 3) +#define DWMCI_INTMSK_TXDR (1 << 4) +#define DWMCI_INTMSK_RXDR (1 << 5) +#define DWMCI_INTMSK_DCRC (1 << 7) +#define DWMCI_INTMSK_RTO (1 << 8) +#define DWMCI_INTMSK_DRTO (1 << 9) +#define DWMCI_INTMSK_HTO (1 << 10) +#define DWMCI_INTMSK_FRUN (1 << 11) +#define DWMCI_INTMSK_HLE (1 << 12) +#define DWMCI_INTMSK_SBE (1 << 13) +#define DWMCI_INTMSK_ACD (1 << 14) +#define DWMCI_INTMSK_EBE (1 << 15) + +/* Raw interrupt Regsiter */ +#define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ + DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) +#define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) +/* CTRL register */ +#define DWMCI_CTRL_RESET (1 << 0) +#define DWMCI_CTRL_FIFO_RESET (1 << 1) +#define DWMCI_CTRL_DMA_RESET (1 << 2) +#define DWMCI_DMA_EN (1 << 5) +#define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) +#define DWMCI_IDMAC_EN (1 << 25) +#define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ + DWMCI_CTRL_DMA_RESET) + +/* CMD register */ +#define DWMCI_CMD_RESP_EXP (1 << 6) +#define DWMCI_CMD_RESP_LENGTH (1 << 7) +#define DWMCI_CMD_CHECK_CRC (1 << 8) +#define DWMCI_CMD_DATA_EXP (1 << 9) +#define DWMCI_CMD_RW (1 << 10) +#define DWMCI_CMD_SEND_STOP (1 << 12) +#define DWMCI_CMD_ABORT_STOP (1 << 14) +#define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) +#define DWMCI_CMD_UPD_CLK (1 << 21) +#define DWMCI_CMD_USE_HOLD_REG (1 << 29) +#define DWMCI_CMD_START (1 << 31) + +/* CLKENA register */ +#define DWMCI_CLKEN_ENABLE (1 << 0) +#define DWMCI_CLKEN_LOW_PWR (1 << 16) + +/* Card-type registe */ +#define DWMCI_CTYPE_1BIT 0 +#define DWMCI_CTYPE_4BIT (1 << 0) +#define DWMCI_CTYPE_8BIT (1 << 16) + +/* Status Register */ +#define DWMCI_BUSY (1 << 9) + +/* FIFOTH Register */ +#define MSIZE(x) ((x) << 28) +#define RX_WMARK(x) ((x) << 16) +#define TX_WMARK(x) (x) + +#define DWMCI_IDMAC_OWN (1 << 31) +#define DWMCI_IDMAC_CH (1 << 4) +#define DWMCI_IDMAC_FS (1 << 3) +#define DWMCI_IDMAC_LD (1 << 2) + +/* Bus Mode Register */ +#define DWMCI_BMOD_IDMAC_RESET (1 << 0) +#define DWMCI_BMOD_IDMAC_FB (1 << 1) +#define DWMCI_BMOD_IDMAC_EN (1 << 7) + +struct dwmci_host { + char *name; + void *ioaddr; + unsigned int quirks; + unsigned int caps; + unsigned int version; + unsigned int clock; + unsigned int bus_hz; + int dev_index; + int buswidth; + u32 fifoth_val; + struct mmc *mmc; + + void (*clksel)(struct dwmci_host *host); + unsigned int (*mmc_clk)(int dev_index); +}; + +struct dwmci_idmac { + u32 flags; + u32 cnt; + u32 addr; + u32 next_addr; +}; + +static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) +{ + writel(val, host->ioaddr + reg); +} + +static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) +{ + writew(val, host->ioaddr + reg); +} + +static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) +{ + writeb(val, host->ioaddr + reg); +} +static inline u32 dwmci_readl(struct dwmci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline u16 dwmci_readw(struct dwmci_host *host, int reg) +{ + return readw(host->ioaddr + reg); +} + +static inline u8 dwmci_readb(struct dwmci_host *host, int reg) +{ + return readb(host->ioaddr + reg); +} + +int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); +#endif /* __DWMMC_HW_H */ diff --git a/include/e500.h b/include/e500.h index e1708b9dc9..0ff8e89a1e 100644 --- a/include/e500.h +++ b/include/e500.h @@ -18,6 +18,9 @@ typedef struct #ifdef CONFIG_SYS_DPAA_FMAN unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + unsigned long freqQMAN; +#endif #ifdef CONFIG_SYS_DPAA_PME unsigned long freqPME; #endif diff --git a/include/env_default.h b/include/env_default.h new file mode 100644 index 0000000000..375e5ca15c --- /dev/null +++ b/include/env_default.h @@ -0,0 +1,135 @@ +/* + * (C) Copyright 2000-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED +env_t environment __PPCENV__ = { + ENV_CRC, /* CRC Sum */ +#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT + 1, /* Flags: valid */ +#endif + { +#elif defined(DEFAULT_ENV_INSTANCE_STATIC) +static char default_environment[] = { +#else +const uchar default_environment[] = { +#endif +#ifdef CONFIG_BOOTARGS + "bootargs=" CONFIG_BOOTARGS "\0" +#endif +#ifdef CONFIG_BOOTCOMMAND + "bootcmd=" CONFIG_BOOTCOMMAND "\0" +#endif +#ifdef CONFIG_RAMBOOTCOMMAND + "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" +#endif +#ifdef CONFIG_NFSBOOTCOMMAND + "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" +#endif +#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) + "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" +#endif +#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) + "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" +#endif +#ifdef CONFIG_LOADS_ECHO + "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" +#endif +#ifdef CONFIG_ETHADDR + "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" +#endif +#ifdef CONFIG_ETH1ADDR + "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" +#endif +#ifdef CONFIG_ETH2ADDR + "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" +#endif +#ifdef CONFIG_ETH3ADDR + "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" +#endif +#ifdef CONFIG_ETH4ADDR + "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" +#endif +#ifdef CONFIG_ETH5ADDR + "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" +#endif +#ifdef CONFIG_ETHPRIME + "ethprime=" CONFIG_ETHPRIME "\0" +#endif +#ifdef CONFIG_IPADDR + "ipaddr=" __stringify(CONFIG_IPADDR) "\0" +#endif +#ifdef CONFIG_SERVERIP + "serverip=" __stringify(CONFIG_SERVERIP) "\0" +#endif +#ifdef CONFIG_SYS_AUTOLOAD + "autoload=" CONFIG_SYS_AUTOLOAD "\0" +#endif +#ifdef CONFIG_PREBOOT + "preboot=" CONFIG_PREBOOT "\0" +#endif +#ifdef CONFIG_ROOTPATH + "rootpath=" CONFIG_ROOTPATH "\0" +#endif +#ifdef CONFIG_GATEWAYIP + "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" +#endif +#ifdef CONFIG_NETMASK + "netmask=" __stringify(CONFIG_NETMASK) "\0" +#endif +#ifdef CONFIG_HOSTNAME + "hostname=" __stringify(CONFIG_HOSTNAME) "\0" +#endif +#ifdef CONFIG_BOOTFILE + "bootfile=" CONFIG_BOOTFILE "\0" +#endif +#ifdef CONFIG_LOADADDR + "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" +#endif +#ifdef CONFIG_CLOCKS_IN_MHZ + "clocks_in_mhz=1\0" +#endif +#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) + "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" +#endif +#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG + "arch=" CONFIG_SYS_ARCH "\0" + "cpu=" CONFIG_SYS_CPU "\0" + "board=" CONFIG_SYS_BOARD "\0" +#ifdef CONFIG_SYS_VENDOR + "vendor=" CONFIG_SYS_VENDOR "\0" +#endif +#ifdef CONFIG_SYS_SOC + "soc=" CONFIG_SYS_SOC "\0" +#endif +#endif +#ifdef CONFIG_EXTRA_ENV_SETTINGS + CONFIG_EXTRA_ENV_SETTINGS +#endif + "\0" +#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED + } +#endif +}; diff --git a/include/fm_eth.h b/include/fm_eth.h index e56541df1b..495765b933 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,13 +30,21 @@ enum fm_port { FM1_DTSEC3, FM1_DTSEC4, FM1_DTSEC5, + FM1_DTSEC6, + FM1_DTSEC9, + FM1_DTSEC10, FM1_10GEC1, + FM1_10GEC2, FM2_DTSEC1, FM2_DTSEC2, FM2_DTSEC3, FM2_DTSEC4, FM2_DTSEC5, + FM2_DTSEC6, + FM2_DTSEC9, + FM2_DTSEC10, FM2_10GEC1, + FM2_10GEC2, NUM_FM_PORTS, }; @@ -45,8 +53,15 @@ enum fm_eth_type { FM_ETH_10G_E, }; +#ifdef CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000) +#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000) +#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000) +#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000) +#else #define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120) #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000) +#endif #define DEFAULT_FM_MDIO_NAME "FSL_MDIO0" #define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO" @@ -57,6 +72,33 @@ enum fm_eth_type { .phy_regs = (void *)pregs, \ .enet_if = PHY_INTERFACE_MODE_NONE, \ +#ifdef CONFIG_SYS_FMAN_V3 +#define FM_DTSEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_1G_E, \ + .port = FM##idx##_DTSEC##n, \ + .rx_port_id = RX_PORT_1G_BASE + n - 1, \ + .tx_port_id = TX_PORT_1G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} + +#define FM_TGEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_10G_E, \ + .port = FM##idx##_10GEC##n, \ + .rx_port_id = RX_PORT_10G_BASE + n - 1, \ + .tx_port_id = TX_PORT_10G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} +#else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ { \ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \ @@ -82,7 +124,7 @@ enum fm_eth_type { .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ offsetof(struct ccsr_fman, mac_10g[n-1]),\ } - +#endif struct fm_eth_info { u8 enabled; u8 fm; @@ -104,7 +146,14 @@ struct tgec_mdio_info { char *name; }; +struct memac_mdio_info { + struct memac_mdio_controller *regs; + char *name; +}; + int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info); +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info); + int fm_standard_init(bd_t *bis); void fman_enet_init(void); void fdt_fixup_fman_ethernet(void *fdt); diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index ea8b54b56f..e24e828cd1 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Jun-jie Zhang * Mingkai Hu * @@ -51,6 +51,10 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value); +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value); +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum); struct fsl_pq_mdio_info { struct tsec_mii_mng *regs; diff --git a/include/i8042.h b/include/i8042.h index 13952899ba..c48c057374 100644 --- a/include/i8042.h +++ b/include/i8042.h @@ -39,6 +39,12 @@ #define I8042_STATUS_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard status read */ #define I8042_COMMAND_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard ctrl write */ +enum { + /* Output register (I8042_DATA_REG) has data for system */ + I8042_STATUS_OUT_DATA = 1 << 0, + I8042_STATUS_IN_DATA = 1 << 1, +}; + #define KBD_US 0 /* default US layout */ #define KBD_GER 1 /* german layout */ @@ -69,6 +75,19 @@ /* exports */ +/** + * Flush all buffer from keyboard controller to host. + */ +void i8042_flush(void); + +/** + * Disables the keyboard so that key strokes no longer generate scancodes to + * the host. + * + * @return 0 if ok, -1 if keyboard input was found while disabling + */ +int i8042_disable(void); + int i8042_kbd_init(void); int i8042_tstc(void); int i8042_getc(void); diff --git a/include/ide.h b/include/ide.h index 95dcbdd362..158e1beaf9 100644 --- a/include/ide.h +++ b/include/ide.h @@ -27,6 +27,7 @@ #define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS)) #define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) +extern ulong ide_bus_offset[]; #ifdef CONFIG_IDE_LED @@ -42,8 +43,10 @@ #ifdef CONFIG_SYS_64BIT_LBA typedef uint64_t lbaint_t; +#define LBAF "%llx" #else typedef ulong lbaint_t; +#define LBAF "%lx" #endif /* @@ -54,6 +57,14 @@ void ide_init(void); ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer); ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer); +#ifdef CONFIG_IDE_PREINIT +int ide_preinit(void); +#endif + +#ifdef CONFIG_IDE_INIT_POSTRESET +int ide_init_postreset(void); +#endif + #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev); #endif @@ -64,4 +75,14 @@ void ide_write_register(int dev, unsigned int port, unsigned char val); void ide_read_data(int dev, ulong *sect_buf, int words); void ide_write_data(int dev, ulong *sect_buf, int words); #endif + +/* + * I/O function overrides + */ +void ide_input_swap_data(int dev, ulong *sect_buf, int words); +void ide_input_data(int dev, ulong *sect_buf, int words); +void ide_output_data(int dev, const ulong *sect_buf, int words); +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts); +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts); + #endif /* _IDE_H */ diff --git a/include/image.h b/include/image.h index e5f6649291..4e5863ff7f 100644 --- a/include/image.h +++ b/include/image.h @@ -511,6 +511,7 @@ static inline int image_check_target_arch(const image_header_t *hdr) #define FIT_HASH_NODENAME "hash" #define FIT_ALGO_PROP "algo" #define FIT_VALUE_PROP "value" +#define FIT_IGNORE_PROP "uboot-ignore" /* image node */ #define FIT_DATA_PROP "data" @@ -595,6 +596,9 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); +#ifndef USE_HOSTCC +int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); +#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); int fit_set_hashes(void *fit); diff --git a/include/input.h b/include/input.h index 0f4acb27f8..e90bb0ba9c 100644 --- a/include/input.h +++ b/include/input.h @@ -84,6 +84,8 @@ struct stdio_dev; * @param config Input state * @param keycode List of key codes to examine * @param num_keycodes Number of key codes + * @return number of ascii characters sent, or 0 if none, or -1 for an + * internal error */ int input_send_keycodes(struct input_config *config, int keycode[], int count); diff --git a/include/libfdt.h b/include/libfdt.h index de82ed5ffd..c93ae28833 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -852,17 +852,17 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, const void *val, int len); /** - * fdt_setprop_inplace_cell - change the value of a single-cell property + * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with + * @val: 32-bit integer value to replace the property with * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. + * fdt_setprop_inplace_u32() replaces the value of a given property + * with the 32-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 4. * * This function will alter only the bytes in the blob which contain * the given property value, and will not alter or move any other part @@ -871,7 +871,7 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, * returns: * 0, on success * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_NOTFOUND, node does not have the named property * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag * -FDT_ERR_BADMAGIC, * -FDT_ERR_BADVERSION, @@ -879,13 +879,59 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, * -FDT_ERR_BADSTRUCTURE, * -FDT_ERR_TRUNCATED, standard meanings */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) +static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) { val = cpu_to_fdt32(val); return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); } +/** + * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to replace the property with + * + * fdt_setprop_inplace_u64() replaces the value of a given property + * with the 64-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 8. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * + * This is an alternative name for fdt_setprop_inplace_u32() + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); +} + /** * fdt_nop_property - replace a property with nop tags * @fdt: pointer to the device tree blob @@ -945,11 +991,20 @@ int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); int fdt_finish_reservemap(void *fdt); int fdt_begin_node(void *fdt, const char *name); int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) { val = cpu_to_fdt32(val); return fdt_property(fdt, name, &val, sizeof(val)); } +static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + return fdt_property_u32(fdt, name, val); +} #define fdt_property_string(fdt, name, str) \ fdt_property(fdt, name, str, strlen(str)+1) int fdt_end_node(void *fdt); @@ -959,6 +1014,7 @@ int fdt_finish(void *fdt); /* Read-write functions */ /**********************************************************************/ +int fdt_create_empty_tree(void *buf, int bufsize); int fdt_open_into(const void *fdt, void *buf, int bufsize); int fdt_pack(void *fdt); @@ -1068,14 +1124,14 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, const void *val, int len); /** - * fdt_setprop_cell - set a property to a single cell value + * fdt_setprop_u32 - set a property to a 32-bit integer * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change * @name: name of the property to change * @val: 32-bit integer value for the property (native endian) * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if + * fdt_setprop_u32() sets the value of the named property in the given + * node to the given 32-bit integer value (converting to big-endian if * necessary), or creates a new property with that value if it does * not already exist. * @@ -1095,13 +1151,59 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, * -FDT_ERR_BADLAYOUT, * -FDT_ERR_TRUNCATED, standard meanings */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) +static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, + uint32_t val) { val = cpu_to_fdt32(val); return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); } +/** + * fdt_setprop_u64 - set a property to a 64-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value for the property (native endian) + * + * fdt_setprop_u64() sets the value of the named property in the given + * node to the given 64-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, + uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_cell - set a property to a single cell value + * + * This is an alternative name for fdt_setprop_u32() + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + return fdt_setprop_u32(fdt, nodeoffset, name, val); +} + /** * fdt_setprop_string - set a property to a string value * @fdt: pointer to the device tree blob @@ -1133,6 +1235,147 @@ static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, #define fdt_setprop_string(fdt, nodeoffset, name, str) \ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +/** + * fdt_appendprop - append to or create a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to append to + * @val: pointer to data to append to the property value + * @len: length of the data to append to the property value + * + * fdt_appendprop() appends the value to the named property in the + * given node, creating the property if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_appendprop_u32 - append a 32-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u32() appends the given 32-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_appendprop_u64 - append a 64-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u64() appends the given 64-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_appendprop_cell - append a single cell value to a property + * + * This is an alternative name for fdt_appendprop_u32() + */ +static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_appendprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_appendprop_string - append a string to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value to append to the property + * + * fdt_appendprop_string() appends the given string to the value of + * the named property in the given node, or creates a new property + * with that value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ + fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + /** * fdt_delprop - delete a property * @fdt: pointer to the device tree blob diff --git a/include/linker_lists.h b/include/linker_lists.h new file mode 100644 index 0000000000..0b405d78ea --- /dev/null +++ b/include/linker_lists.h @@ -0,0 +1,148 @@ +/* + * include/linker_lists.h + * + * Implementation of linker-generated arrays + * + * Copyright (C) 2012 Marek Vasut + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ +#ifndef __LINKER_LISTS_H__ +#define __LINKER_LISTS_H__ + +/** + * ll_entry_declare() - Declare linker-generated array entry + * @_type: Data type of the entry + * @_name: Name of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots, for name concatenation) + * @_section_d: Subsection of u_boot_list in which this entry is placed + * (with dots, for section concatenation) + * + * This macro declares a variable that is placed into a linker-generated + * array. This is a basic building block for more advanced use of linker- + * generated arrays. The user is expected to build their own macro wrapper + * around this one. + * + * A variable declared using this macro must be compile-time initialized + * and is as such placed into subsection of special section, .u_boot_list. + * The subsection is specified by the _section_[u,d] parameter, see below. + * The base name of the variable is _name, yet the actual variable is + * declared as concatenation of + * + * %_u_boot_list_ + @_section_u + _ + @_name + * + * which ensures name uniqueness. This variable shall never be refered + * directly though. + * + * Special precaution must be made when using this macro: + * 1) The _type must not contain the "static" keyword, otherwise the entry + * is not generated. + * + * 2) The @_section_u and @_section_d variables must match, the only difference + * is that in @_section_u is every dot "." character present in @_section_d + * replaced by a single underscore "_" character in @_section_u. The actual + * purpose of these parameters is to select proper subsection in the global + * .u_boot_list section. + * + * 3) In case a section is declared that contains some array elements AND a + * subsection of this section is declared and contains some elements, it is + * imperative that the elements are of the same type. + * + * 4) In case an outer section is declared that contains some array elements + * AND am inner subsection of this section is declared and contains some + * elements, then when traversing the outer section, even the elements of + * the inner sections are present in the array. + * + * Example: + * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * .x = 3, + * .y = 4, + * }; + */ +#define ll_entry_declare(_type, _name, _section_u, _section_d) \ + _type _u_boot_list_##_section_u##_##_name __attribute__(( \ + unused, aligned(4), \ + section(".u_boot_list."#_section_d"."#_name))) + +/** + * ll_entry_start() - Point to first entry of linker-generated array + * @_type: Data type of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns (_type *) pointer to the very first entry of a + * linker-generated array placed into subsection of .u_boot_list section + * specified by _section_u argument. + * + * Example: + * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); + */ +#define ll_entry_start(_type, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##__start; \ + _type *_ll_result = &_u_boot_list_##_section_u##__start;\ + _ll_result; \ + }) + +/** + * ll_entry_count() - Return the number of elements in linker-generated array + * @_type: Data type of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns the number of elements of a linker-generated array + * placed into subsection of .u_boot_list section specified by _section_u + * argument. The result is of an unsigned int type. + * + * Example: + * int i; + * const unsigned int count = ll_entry_count(struct my_sub_cmd, cmd_sub); + * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); + * for (i = 0; i < count; i++, msc++) + * printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y); + */ +#define ll_entry_count(_type, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##__start; \ + extern _type _u_boot_list_##_section_u##__end; \ + unsigned int _ll_result = \ + &_u_boot_list_##_section_u##__end - \ + &_u_boot_list_##_section_u##__start; \ + _ll_result; \ + }) + + +/** + * ll_entry_get() - Retrieve entry from linker-generated array by name + * @_type: Data type of the entry + * @_name: Name of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns a pointer to a particular entry in LG-array + * identified by the subsection of u_boot_list where the entry resides + * and it's name. + * + * Example: + * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * .x = 3, + * .y = 4, + * }; + * ... + * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub); + */ +#define ll_entry_get(_type, _name, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##_##_name; \ + _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\ + _ll_result; \ + }) + +#endif /* __LINKER_LISTS_H__ */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index a78f1a223f..b295d6d71b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -74,6 +74,7 @@ #define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) #define SPR_8308 0x8100 +#define SPR_8309 0x8110 #define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 @@ -389,6 +390,86 @@ #define SICRH_TSOBI1_V2P5 (1 << 1) #define SICRH_TSOBI2_V3P3 (0 << 0) #define SICRH_TSOBI2_V2P5 (1 << 0) + +#elif defined(CONFIG_MPC8309) +/* SICR_1 */ +#define SICR_1_UART1_UART1S (0 << (30-2)) +#define SICR_1_UART1_UART1RTS (1 << (30-2)) +#define SICR_1_I2C_I2C (0 << (30-4)) +#define SICR_1_I2C_CKSTOP (1 << (30-4)) +#define SICR_1_IRQ_A_IRQ (0 << (30-6)) +#define SICR_1_IRQ_A_MCP (1 << (30-6)) +#define SICR_1_IRQ_B_IRQ (0 << (30-8)) +#define SICR_1_IRQ_B_CKSTOP (1 << (30-8)) +#define SICR_1_GPIO_A_GPIO (0 << (30-10)) +#define SICR_1_GPIO_A_SD (2 << (30-10)) +#define SICR_1_GPIO_A_DDR (3 << (30-10)) +#define SICR_1_GPIO_B_GPIO (0 << (30-12)) +#define SICR_1_GPIO_B_SD (2 << (30-12)) +#define SICR_1_GPIO_B_QE (3 << (30-12)) +#define SICR_1_GPIO_C_GPIO (0 << (30-14)) +#define SICR_1_GPIO_C_CAN (1 << (30-14)) +#define SICR_1_GPIO_C_DDR (2 << (30-14)) +#define SICR_1_GPIO_C_LCS (3 << (30-14)) +#define SICR_1_GPIO_D_GPIO (0 << (30-16)) +#define SICR_1_GPIO_D_CAN (1 << (30-16)) +#define SICR_1_GPIO_D_DDR (2 << (30-16)) +#define SICR_1_GPIO_D_LCS (3 << (30-16)) +#define SICR_1_GPIO_E_GPIO (0 << (30-18)) +#define SICR_1_GPIO_E_CAN (1 << (30-18)) +#define SICR_1_GPIO_E_DDR (2 << (30-18)) +#define SICR_1_GPIO_E_LCS (3 << (30-18)) +#define SICR_1_GPIO_F_GPIO (0 << (30-20)) +#define SICR_1_GPIO_F_CAN (1 << (30-20)) +#define SICR_1_GPIO_F_CK (2 << (30-20)) +#define SICR_1_USB_A_USBDR (0 << (30-22)) +#define SICR_1_USB_A_UART2S (1 << (30-22)) +#define SICR_1_USB_B_USBDR (0 << (30-24)) +#define SICR_1_USB_B_UART2S (1 << (30-24)) +#define SICR_1_USB_B_UART2RTS (2 << (30-24)) +#define SICR_1_USB_C_USBDR (0 << (30-26)) +#define SICR_1_USB_C_QE_EXT (3 << (30-26)) +#define SICR_1_FEC1_FEC1 (0 << (30-28)) +#define SICR_1_FEC1_GTM (1 << (30-28)) +#define SICR_1_FEC1_GPIO (2 << (30-28)) +#define SICR_1_FEC2_FEC2 (0 << (30-30)) +#define SICR_1_FEC2_GTM (1 << (30-30)) +#define SICR_1_FEC2_GPIO (2 << (30-30)) +/* SICR_2 */ +#define SICR_2_FEC3_FEC3 (0 << (30-0)) +#define SICR_2_FEC3_TMR (1 << (30-0)) +#define SICR_2_FEC3_GPIO (2 << (30-0)) +#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2)) +#define SICR_2_HDLC1_A_GPIO (1 << (30-2)) +#define SICR_2_HDLC1_A_TDM1 (2 << (30-2)) +#define SICR_2_ELBC_A_LA (0 << (30-4)) +#define SICR_2_ELBC_B_LCLK (0 << (30-6)) +#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8)) +#define SICR_2_HDLC2_A_GPIO (0 << (30-8)) +#define SICR_2_HDLC2_A_TDM2 (0 << (30-8)) +/* bits 10-11 unused */ +#define SICR_2_USB_D_USBDR (0 << (30-12)) +#define SICR_2_USB_D_GPIO (2 << (30-12)) +#define SICR_2_USB_D_QE_BRG (3 << (30-12)) +#define SICR_2_PCI_PCI (0 << (30-14)) +#define SICR_2_PCI_CPCI_HS (2 << (30-14)) +#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16)) +#define SICR_2_HDLC1_B_GPIO (1 << (30-16)) +#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16)) +#define SICR_2_HDLC1_B_TDM1 (3 << (30-16)) +#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18)) +#define SICR_2_HDLC1_C_GPIO (1 << (30-18)) +#define SICR_2_HDLC1_C_TDM1 (2 << (30-18)) +#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20)) +#define SICR_2_HDLC2_B_GPIO (1 << (30-20)) +#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20)) +#define SICR_2_HDLC2_B_TDM2 (3 << (30-20)) +#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22)) +#define SICR_2_HDLC2_C_GPIO (1 << (30-22)) +#define SICR_2_HDLC2_C_TDM2 (2 << (30-22)) +#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22)) +#define SICR_2_QUIESCE_B (0 << (30-24)) + #endif /* @@ -580,6 +661,63 @@ #define HRCWL_SVCOD_DIV_8 0x10000000 #define HRCWL_SVCOD_DIV_2 0x20000000 #define HRCWL_SVCOD_DIV_1 0x30000000 +#elif defined(CONFIG_MPC8309) + +#define HRCWL_CEVCOD 0x000000C0 +#define HRCWL_CEVCOD_SHIFT 6 +/* + * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012 + * these are different than with 8360, 832x + */ +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080 + +#define HRCWL_CEPDF 0x00000020 +#define HRCWL_CEPDF_SHIFT 5 +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CEPMF 0x0000001F +#define HRCWL_CEPMF_SHIFT 0 +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F + +#define HRCWL_SVCOD 0x30000000 +#define HRCWL_SVCOD_SHIFT 28 +#define HRCWL_SVCOD_DIV_2 0x00000000 +#define HRCWL_SVCOD_DIV_4 0x10000000 +#define HRCWL_SVCOD_DIV_8 0x20000000 +#define HRCWL_SVCOD_DIV_1 0x30000000 #endif /* @@ -940,6 +1078,21 @@ #define SCCR_SATACM_1 0x00000055 #define SCCR_SATACM_2 0x000000aa #define SCCR_SATACM_3 0x000000ff +#elif defined(CONFIG_MPC8309) +/* SCCR bits - MPC8309 specific */ +#define SCCR_SDHCCM 0x0c000000 +#define SCCR_SDHCCM_SHIFT 26 +#define SCCR_SDHCCM_0 0x00000000 +#define SCCR_SDHCCM_1 0x04000000 +#define SCCR_SDHCCM_2 0x08000000 +#define SCCR_SDHCCM_3 0x0c000000 + +#define SCCR_USBDRCM 0x00c00000 +#define SCCR_USBDRCM_SHIFT 22 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00400000 +#define SCCR_USBDRCM_2 0x00800000 +#define SCCR_USBDRCM_3 0x00c00000 #endif #define SCCR_PCIEXP1CM 0x00300000 @@ -969,7 +1122,7 @@ */ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) +#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) #define CSCONFIG_ODT_RD_NEVER 0x00000000 #define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000 #define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000 diff --git a/include/sdhci.h b/include/sdhci.h index c0345ed86e..c44793d5ec 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -224,6 +224,7 @@ #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) #define SDHCI_QUIRK_NO_CD (1 << 5) +#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) /* to make gcc happy */ struct sdhci_host; diff --git a/include/serial.h b/include/serial.h index a8d23f519d..14f863ed20 100644 --- a/include/serial.h +++ b/include/serial.h @@ -20,6 +20,8 @@ struct serial_device { struct serial_device *next; }; +void default_serial_puts(const char *s); + extern struct serial_device serial_smc_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile index c965577dc0..0693d4bf55 100644 --- a/lib/libfdt/Makefile +++ b/lib/libfdt/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)libfdt.o SOBJS = -COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o +COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o fdt_empty_tree.o COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt) COBJS-$(CONFIG_FIT) += $(COBJS-libfdt) diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c new file mode 100644 index 0000000000..f72d13b1d1 --- /dev/null +++ b/lib/libfdt/fdt_empty_tree.c @@ -0,0 +1,84 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2012 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_create_empty_tree(void *buf, int bufsize) +{ + int err; + + err = fdt_create(buf, bufsize); + if (err) + return err; + + err = fdt_finish_reservemap(buf); + if (err) + return err; + + err = fdt_begin_node(buf, ""); + if (err) + return err; + + err = fdt_end_node(buf); + if (err) + return err; + + err = fdt_finish(buf); + if (err) + return err; + + return fdt_open_into(buf, buf, bufsize); +} + diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c index 5c27a677e3..5ed23d6f19 100644 --- a/lib/libfdt/fdt_rw.c +++ b/lib/libfdt/fdt_rw.c @@ -293,6 +293,33 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, return 0; } +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err, oldlen, newlen; + + FDT_RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (prop) { + newlen = len + oldlen; + err = _fdt_splice_struct(fdt, prop->data, + FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(newlen)); + if (err) + return err; + prop->len = cpu_to_fdt32(newlen); + memcpy(prop->data + oldlen, val, len); + } else { + err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + memcpy(prop->data, val, len); + } + return 0; +} + int fdt_delprop(void *fdt, int nodeoffset, const char *name) { struct fdt_property *prop; diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index 87784d2937..43e72c42d4 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -6,6 +6,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -36,8 +37,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ ######################################################################### diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index d2b08f60c5..da49c100c5 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile index cdbd49292c..f270faae02 100644 --- a/nand_spl/board/freescale/p1010rdb/Makefile +++ b/nand_spl/board/freescale/p1010rdb/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,8 +63,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile index da435213fc..b2882844b3 100644 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ b/nand_spl/board/freescale/p1023rds/Makefile @@ -27,6 +27,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -57,8 +58,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile index 46cf7099b6..7146d16a27 100644 --- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,8 +63,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile index 0336346660..becf7fa99e 100644 --- a/nand_spl/board/karo/tx25/Makefile +++ b/nand_spl/board/karo/tx25/Makefile @@ -27,6 +27,7 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -57,8 +58,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ ######################################################################### diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index d2b08f60c5..ee361314fd 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds index 567f63516f..2ed646630c 100644 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -50,9 +50,11 @@ SECTIONS . = ALIGN(4); .got : { *(.got) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include + } . = ALIGN(4); diff --git a/spl/.gitignore b/spl/.gitignore index 7c8814709f..8cf487e5c8 100644 --- a/spl/.gitignore +++ b/spl/.gitignore @@ -2,3 +2,4 @@ u-boot-spl u-boot-spl.bin u-boot-spl.lds u-boot-spl.map +u-boot.lst diff --git a/spl/Makefile b/spl/Makefile index 7b52bd1070..3195390b2f 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -151,8 +151,12 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -$(obj)u-boot-spl.lds: $(LDSCRIPT) depend - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@ +# The following line expands into whole rule which generates u-boot.lst, +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) +$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend .PHONY: depend diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index ab8c15d30e..9b023e807b 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -119,102 +119,8 @@ static unsigned char active_flag = 1; /* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */ static unsigned char obsolete_flag = 0; - -static char default_environment[] = { -#if defined(CONFIG_BOOTARGS) - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#if defined(CONFIG_BOOTCOMMAND) - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#if defined(CONFIG_RAMBOOTCOMMAND) - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_NFSBOOTCOMMAND) - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=" "1" "\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY) "\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" /* Termimate struct environment data with 2 NULs */ -}; +#define DEFAULT_ENV_INSTANCE_STATIC +#include static int flash_io (int mode); static char *envmatch (char * s1, char * s2); @@ -494,6 +400,8 @@ int fw_setenv(int argc, char *argv[]) char *val = argv[i]; size_t val_len = strlen(val); + if (value) + value[len - 1] = ' '; value = realloc(value, len + val_len + 1); if (!value) { fprintf(stderr, @@ -504,9 +412,8 @@ int fw_setenv(int argc, char *argv[]) memcpy(value + len, val, val_len); len += val_len; - value[len++] = ' '; + value[len++] = '\0'; } - value[len - 1] = '\0'; fw_env_write(name, value); @@ -738,8 +645,8 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count, return -1; } #ifdef DEBUG - fprintf (stderr, "Read 0x%x bytes at 0x%llx\n", - rc, blockstart + block_seek); + fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n", + rc, blockstart + block_seek, DEVNAME(dev)); #endif processed += readlen; readlen = min (blocklen, count - processed); @@ -818,6 +725,18 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, if (write_total != rc) return -1; +#ifdef DEBUG + fprintf(stderr, "Preserving data "); + if (block_seek != 0) + fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1); + if (block_seek + count != write_total) { + if (block_seek != 0) + fprintf(stderr, " and "); + fprintf(stderr, "0x%lx - 0x%x", + block_seek + count, write_total - 1); + } + fprintf(stderr, "\n"); +#endif /* Overwrite the old environment */ memcpy (data + block_seek, buf, count); } else { @@ -876,7 +795,8 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, } #ifdef DEBUG - printf ("Write 0x%x bytes at 0x%llx\n", erasesize, blockstart); + fprintf(stderr, "Write 0x%x bytes at 0x%llx\n", erasesize, + blockstart); #endif if (write (fd, data + processed, erasesize) != erasesize) { fprintf (stderr, "Write error on %s: %s\n", @@ -943,7 +863,7 @@ static int flash_write (int fd_current, int fd_target, int dev_target) } #ifdef DEBUG - printf ("Writing new environment at 0x%lx on %s\n", + fprintf(stderr, "Writing new environment at 0x%lx on %s\n", DEVOFFSET (dev_target), DEVNAME (dev_target)); #endif rc = flash_write_buf(dev_target, fd_target, environment.image, @@ -957,7 +877,8 @@ static int flash_write (int fd_current, int fd_target, int dev_target) off_t offset = DEVOFFSET (dev_current) + offsetof (struct env_image_redundant, flags); #ifdef DEBUG - printf ("Setting obsolete flag in environment at 0x%lx on %s\n", + fprintf(stderr, + "Setting obsolete flag in environment at 0x%lx on %s\n", DEVOFFSET (dev_current), DEVNAME (dev_current)); #endif flash_flag_obsolete (dev_current, fd_current, offset); @@ -1224,6 +1145,9 @@ int fw_env_open(void) /* Other pointers are already set */ free (addr1); } +#ifdef DEBUG + fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current)); +#endif } return 0; } diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index 59eca99341..72d37a0b04 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -38,7 +38,7 @@ def CountCommitsToBranch(): Return: Number of patches that exist on top of the branch """ - pipe = [['git', 'log', '--oneline', '@{upstream}..'], + pipe = [['git', 'log', '--no-color', '--oneline', '@{upstream}..'], ['wc', '-l']] stdout = command.RunPipe(pipe, capture=True, oneline=True) patch_count = int(stdout) diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index 0503bac42e..ad280cc46c 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -344,7 +344,8 @@ def GetMetaData(start, count): start: Commit to start from: 0=HEAD, 1=next one, etc. count: Number of commits to list """ - pipe = [['git', 'log', '--reverse', 'HEAD~%d' % start, '-n%d' % count]] + pipe = [['git', 'log', '--no-color', '--reverse', 'HEAD~%d' % start, + '-n%d' % count]] stdout = command.RunPipe(pipe, capture=True) series = Series() ps = PatchStream(series, is_log=True)