From: York Sun <yorksun@freescale.com>
Date: Sun, 16 Sep 2012 08:02:30 +0000 (+0000)
Subject: common/i2c: Add i2c write command
X-Git-Tag: v2013.01-rc1~142^2~1
X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=ff5d2dce1e8b24e9f4d85db3906c5d2e25b0cedf

common/i2c: Add i2c write command

Add i2c write command to write data from memory to i2c devices.

Signed-off-by: York Sun <yorksun@freescale.com>
---

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 795814d88f..b59470e7f6 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -223,6 +223,54 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 	return 0;
 }
 
+static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u_char	chip;
+	uint	devaddr, alen, length;
+	u_char  *memaddr;
+
+	if (argc != 5)
+		return cmd_usage(cmdtp);
+
+	/*
+	 * memaddr is the address where to store things in memory
+	 */
+	memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16);
+
+	/*
+	 * I2C chip address
+	 */
+	chip = simple_strtoul(argv[2], NULL, 16);
+
+	/*
+	 * I2C data address within the chip.  This can be 1 or
+	 * 2 bytes long.  Some day it might be 3 bytes long :-).
+	 */
+	devaddr = simple_strtoul(argv[3], NULL, 16);
+	alen = get_alen(argv[3]);
+	if (alen > 3)
+		return cmd_usage(cmdtp);
+
+	/*
+	 * Length is the number of objects, not number of bytes.
+	 */
+	length = simple_strtoul(argv[4], NULL, 16);
+
+	while (length-- > 0) {
+		if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
+			puts("Error writing to the chip.\n");
+			return 1;
+		}
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+		udelay(11000);
+#endif
+	}
+	return 0;
+}
+
 /*
  * Syntax:
  *	i2c md {i2c_chip} {addr}{.0, .1, .2} {len}
@@ -1282,6 +1330,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
 	U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
 	U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
 	U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+	U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
 	U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
 #if defined(CONFIG_CMD_SDRAM)
 	U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
@@ -1333,6 +1382,7 @@ U_BOOT_CMD(
 	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
 	"i2c probe - show devices on the I2C bus\n"
 	"i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+	"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
 	"i2c reset - re-init the I2C Controller\n"
 #if defined(CONFIG_CMD_SDRAM)
 	"i2c sdram chip - print SDRAM configuration information\n"