]> git.kernelconcepts.de Git - karo-tx-uboot.git/history - board/karo
karo: tx6ul: defer mmc probing until environment has been loaded
[karo-tx-uboot.git] / board / karo /
2016-02-18 Lothar Waßmannkaro: tx6ul: defer mmc probing until environment has...
2016-02-18 Lothar Waßmannkaro: tx6ul: proper initialize second FEC if available
2016-02-18 Lothar Waßmannkaro: tx6ul: reorder functions to better follow which...
2016-02-18 Lothar Waßmannkaro: tx6: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx6ul: make show_activity() bail out on GPIO...
2016-02-18 Lothar Waßmannkaro: tx6ul: indentation fixes
2016-02-18 Lothar Waßmannkaro: tx6: don't write u-boot image with WITH_DROP_FFS
2016-02-04 Lothar Waßmannkaro: tx6ul: fix ENET2_TX_CLK pad settings
2015-11-26 Lothar Waßmannkaro: tx6ul: set VIDEO_PLL to 648MHz by default karo-tx6 KARO-TX6UL-2015-11-30
2015-11-26 Lothar Waßmannkaro: tx6ul: fix ENFC_CLK_SEL bitmask
2015-11-26 Lothar WaßmannARM: imx6ul: add support for mxsfb on i.MX6UL
2015-11-26 Lothar Waßmannkaro: tx6: rework PMIC code to allow for different...
2015-11-26 Lothar Waßmannkaro: tx6ul: enable soft_i2c for PMIC access
2015-11-26 Lothar Waßmannkaro: tx6ul: fix max. dimensions of framebuffer
2015-11-16 Lothar Waßmannkaro: tx6: remove secure_boot fuse override which is...
2015-10-26 Lothar WaßmannMerge branch 'tx48-devel' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx28-devel' into karo-devel
2015-10-26 Lothar Waßmannkaro: tx28: Kconfig: select CMD_ROMUPDATE for TX28...
2015-10-26 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-devel
2015-10-26 Lothar Waßmannkaro: tx48: fix build error "undefined reference to...
2015-10-26 Lothar Waßmannkaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
2015-10-22 Lothar Waßmannkaro: tx6: adapt romupdate command for i.MX6UL
2015-10-22 Lothar Waßmannkaro: tx6: remove unused code from flash.c
2015-10-20 Lothar Waßmannkaro: tx6ul: disable PMIC init
2015-10-20 Lothar Waßmannkaro: tx6: change DGCTRL init values depending on SoC...
2015-10-20 Lothar Waßmannkaro: tx6: add TXUL support
2015-10-19 Lothar Waßmannkaro: tx6: selectively set individual CCGR bits via DCD
2015-10-19 Lothar Waßmannkaro: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_...
2015-10-19 Lothar Waßmannkaro: tx6: config.mk cleanup
2015-10-19 Lothar Waßmannkaro: tx6: further cleanups
2015-10-05 Lothar Waßmannkaro: tx28: select PHYLIB in Kconfig
2015-09-22 Lothar Waßmannkaro: use lldiv() for 64bit division
2015-09-18 Lothar Waßmannkaro: tx6: don't perform DQS gating calibration KARO-TX6-2015-09-18
2015-09-18 Lothar Waßmannkaro: tx6: don't position CSF at fixed offset
2015-09-18 Lothar Waßmannkaro: tx6: remove usesless symbol _image_binary_end
2015-09-17 Lothar Waßmannkaro: cleanup after merge of v2015.10-rc2
2015-09-08 Joe Hershbergernet: cosmetic: Name ethaddr variables consistently
2015-08-24 Lothar WaßmannMerge branch 'karo-tx-uboot' into kc-merge
2015-08-21 Lothar WaßmannMerge remote-tracking branch 'remotes/tx6/tx6' into...
2015-08-21 Lothar WaßmannMerge remote-tracking branch 'remotes/tx28/tx28' into...
2015-08-21 Lothar Waßmannkaro: tx28: romupdate: update to match tx6 version
2015-08-21 Lothar Waßmannkaro: tx28: adjust parameters to mxs_common_spl_init...
2015-08-21 Lothar Waßmannnet: fec: remove obsolete FEC_MXC_MULTI
2015-08-21 Lothar WaßmannARM: mxs: spl_power_init: fix merge error leading to...
2015-08-21 Lothar Waßmannkaro: tx28: spl: export CONFIG_SPL_TEXT_BASE via CPPFLA...
2015-08-21 Lothar Waßmanntx28: config.mk: fix build error: "No rule to make...
2015-08-21 Lothar Waßmannkaro: tx28: use CONFIG_SYS_SDRAM_SIZE instead of CONFIG...
2015-08-21 Lothar Waßmannkaro: tx28: replace SETUP_IOMUX_PAD macro with mxs_iomu...
2015-08-21 Lothar Waßmannarm: mxs: remove conflict markers from merge
2015-08-21 Lothar Waßmannkaro: tx6: modify SDRAM timing to be compatible with...
2015-08-21 Lothar Waßmannkaro: tx6: configure ENET_OUT pad in DCD for earlier...
2015-08-21 Lothar Waßmannkaro: tx6: add missing setup of MMDC2_MPMUR0
2015-08-21 Lothar Waßmannkaro: tx6: cleanup DDR calibration code
2015-08-21 Lothar Waßmannkaro: tx6: increase WALAT/RALAT to max. during DDR...
2015-08-21 Lothar Waßmannkaro: tx6: remove bogus writes to MMDC2_MDPDC
2015-08-21 Lothar Waßmannkaro: tx6: try to revive I2C bus
2015-08-21 Lothar Waßmannkaro: tx6: implement secure boot support
2015-08-21 Lothar Waßmannkaro: tx6: probe for PMIC to determine module variant...
2015-08-21 Lothar Waßmannkaro: tx6: cleanup HAB functions
2015-08-21 Lothar Waßmannkaro: tx6: general cleanups
2015-06-26 Lothar Waßmannkaro: add support for TXA5 (SAMA5D4) modules karo-txa5 KARO-TXA5-2015-06-26
2015-06-26 Lothar Waßmannkaro: common: include <errno.h> in karo.h to prevent...
2015-06-26 Lothar Waßmannconfig: rename CONFIG_MX* to CONFIG_SOC_MX*
2015-06-16 Lothar Waßmannkaro: tx53: adjust linker script and lowlevel_init...
2015-06-16 Lothar Waßmannmx53: add HAB support
2015-06-15 Lothar Waßmannkaro: tx53: update romupdate command
2015-06-15 Lothar Waßmannkaro: tx53: remove wrong FB_SYNC_CLK_LAT_FALL flag...
2015-06-15 Lothar Waßmannkaro: tx53: check 'video_mode' variable before calling...
2015-06-15 Lothar Waßmannkaro: tx53: delay GPIO initialization untill after...
2015-06-15 Lothar Waßmannkaro: kconfig: update TX53 Kconfig
2015-06-15 Lothar Waßmannkaro: config: enable CONFIG_GENERIC_BOARD
2015-03-27 Lothar Waßmannkaro: tx51: justify and adjust the delay required befor... KARO-TX51-2015-03-27
2015-03-24 Lothar Waßmannkaro: tx6: return -EINVAL from tx6_pmic_init() if no... KARO-TX6-2015-03-24
2015-03-09 Lothar Waßmannupdate to 2015.04-rc1
2015-03-04 Lothar Waßmannkaro: tx6: improve pad ctrl for SD card interfaces
2015-03-04 Lothar Waßmannkaro: mmc: fix file read from eMMC partition
2015-03-04 Lothar Waßmannkaro: tx6: enable FDT support for MFG U-Boot build
2015-03-04 Lothar Waßmannkaro: tx6: Cleanup PMIC code
2015-03-04 Lothar Waßmannkaro: merge with Ka-Ro specific tree for secure boot...
2015-03-03 Lothar Waßmannkaro: tx6: improve pad ctrl for SD card interfaces KARO-TX-2015-03-03
2015-03-03 Lothar Waßmannkaro: mmc: fix file read from eMMC partition
2015-02-04 Lothar Waßmannkaro: tx6: configure gpr3 when initializing LCD interface
2015-02-04 Lothar Waßmannkaro: tx6: reduce VDDSOC and VDDCORE to 1.35V
2015-02-04 Lothar Waßmannkaro: tx6: Cleanup PMIC code
2015-02-04 Lothar Waßmannkaro: tx6: autodetect HW rev 1 and 3
2015-01-09 Lothar Waßmannkaro: introduce variables 'safeboot' and 'wdreset'
2015-01-09 Lothar Waßmannkaro: remove dynamically created variables from the...
2015-01-09 Lothar Waßmannkaro: tx28: improve random init code
2015-01-09 Lothar Waßmannkaro: tx28: use symbolic name for can transceiver enabl...
2015-01-09 Lothar Waßmannkaro: tx48: don't call karo_fdt_get_backlight_polarity...
2015-01-09 Lothar Waßmannkaro: tx48: explicitly call tx48_phy_init()
2015-01-09 Lothar Waßmannkaro: tx6: use LDB clock as parent for DI clock for...
2015-01-09 Lothar Waßmannkaro: tx6: change IPU related clock frequencies to...
2015-01-09 Lothar Waßmannarm: mx6: make shutdown temperature configurable
2015-01-09 Lothar Waßmannkaro: tx6: add support for TX6 HW Rev. 3
2015-01-09 Lothar Waßmannkaro: tx6: add support for 16bit SDRAM bus width
2015-01-09 Lothar Waßmannkaro: tx6: fix definition of IOMUXC_SW_PAD_CTL_GRP_DDRP...
2015-01-09 Lothar Waßmannkaro: tx6: define bitmask for DDR_PKE
2015-01-09 Lothar Waßmannkaro: tx6: remove bogus definition of MMDC1_MPWRDLST
next