]> git.kernelconcepts.de Git - karo-tx-uboot.git/history - board
karo: tx6: increase SYS_BOOTM_LEN to 32MiB
[karo-tx-uboot.git] / board /
2020-06-16 Lothar Waßmannkaro: tx6: enable BOOTP_RANDOM_ID
2020-06-16 Lothar Waßmannkaro: tx6: fix copy/paste error
2020-06-16 Lothar Waßmannkaro: tx6: fix duplicate const error
2020-05-05 Lothar Waßmannkaro: tx6: add support for TXUL-5014
2019-07-18 Lothar Waßmannkaro: tx6ul-8013: prevent stall of mxs_reset() of the...
2019-05-09 Lothar Waßmannkaro: tx6: disable Heartbeat LED in case of error
2019-05-09 Lothar Waßmannkaro: tx6: configure all relevant PMIC registers
2019-05-09 Lothar Waßmannkaro: common: remove '_' from DT property names
2019-05-09 Lothar Waßmannkaro: tx6: make pixelclock overridable via DT or 'video...
2019-01-30 Lothar Waßmannkaro: txul: fix LDO4 output voltage
2018-10-17 Lothar Waßmannfix TXUL module name
2018-02-08 Lothar Waßmannkaro: tx6: enable vsnprintf for safer string operations
2018-02-08 Lothar Waßmannkaro: txul: add support for TX-Tester-V5 baseboard
2018-02-08 Lothar Waßmannkaro: txul: read second mac address from fuses
2018-01-10 Lothar Waßmannkaro: add workaround for Linux hang on i.MX6QP when...
2018-01-08 Lothar Waßmannkaro: txul: remove i2c_gpio_pads
2018-01-08 Lothar Waßmannkaro: tx6: change drive strength of Ethernet related...
2018-01-08 Lothar Waßmannkaro: tx6: indentation cleanup
2018-01-08 Lothar Waßmannkaro: tx6: cleanup i2c_recover implementation
2018-01-08 Lothar Waßmannkaro: tx6: remove duplicate initialization of ENET...
2017-10-25 Lothar Waßmannboard: karo: add support for using Linux simple-panel... KARO-TX6-2017-10-27
2017-07-21 Lothar Waßmannkaro: tx6: add support for Ka-Ro TX6UL-8013 KARO-TX6ULL-2017-07-07
2017-04-03 Lothar Waßmannkaro: add support for TX6UL-5012
2017-01-04 Lothar Waßmannkaro: tx6: use GP1 fuse for MIPI variant detection KARO-TX6Q-1230_2017-01-04
2016-12-23 Lothar Waßmannkaro: tx6: support MIPI variant in board name KARO-TX6Q-1230-2016-12-23
2016-07-11 Lothar Waßmannkaro: tx6ul: configure some more PMIC regs and disable... KARO-TX-2016-07-11
2016-07-11 Lothar Waßmannkaro: tx6: configure PMIC to a consistent state upon...
2016-07-11 Lothar Waßmannkaro: tx6: fix offset voltage in formulas for calculati...
2016-07-11 Lothar Waßmannkaro: tx6: remove obsolete TX6Q-1020
2016-07-05 Lothar Waßmannkaro: tx6ul: fix wrong board name in U-Boot messages KARO-TX-2016-07-05
2016-07-04 Lothar WaßmannMerge branch 'tx6-bugfix'
2016-07-04 Lothar WaßmannMerge branch 'tx53-bugfix'
2016-07-04 Lothar WaßmannMerge branch 'tx28-bugfix'
2016-07-01 Lothar Waßmannkaro: tx6: remove unreachable 'return' statements
2016-07-01 Lothar Waßmannkaro: tx6: fix miscalculated start block for 'romupdate...
2016-07-01 Lothar Waßmannkaro: tx6ul: rework PMIC support and print PMIC name...
2016-07-01 Lothar Waßmannkaro: tx6ul: enable soft i2c driver and 'i2c' command
2016-07-01 Lothar Waßmannkaro: tx6ul: rework I2C recovery routine to be more...
2016-07-01 Lothar Waßmannkaro: tx6ul: change local 'tx6_' prefixes to 'tx6ul'
2016-07-01 Lothar Waßmannkaro: tx6ul: configure JTAG_* pads for JTAG function...
2016-07-01 Lothar Waßmannkaro: tx6: configure all pads with explicit pad_ctl...
2016-07-01 Lothar Waßmannkaro: tx6: introduce generic TARGET_EMMC/TARGET_NAND...
2016-06-30 Lothar Waßmannkaro: tx28: fix bugs in 'romupdate' command
2016-06-30 Lothar Waßmannmxs_gpio: correctly use the GPIO API
2016-06-30 Lothar Waßmannkaro: tx28: request gpio for acitivity LED and disable...
2016-06-30 Lothar Waßmannkaro: tx28: enable activity led only on stk5-v3 baseboard
2016-06-30 Lothar Waßmannkaro: tx28: enable U-Boot build with different (or...
2016-06-30 Lothar Waßmannkaro: tx28: explicitly configure pad config (voltage...
2016-06-30 Lothar Waßmannkaro: tx28: remove LCD pad configuration from SPL
2016-06-30 Lothar Waßmannkaro: tx53: romupdate: fix calculation of starting...
2016-06-30 Lothar Waßmannkaro: tx53: various fixes for CONFIG_SECURE_BOOT
2016-06-29 Lothar Waßmannfs/fs.c: correctly interpret the '(max)len' parameter...
2016-06-13 Lothar WaßmannMerge branch 'tx28-update' into tx28-bugfix
2016-04-26 Lothar Waßmannkaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
2016-04-26 Lothar Waßmannkaro: tx6ul: make board string dependent on cpurev
2016-04-26 Lothar Waßmannkaro: tx6: pmic: print PMIC name in boot messages
2016-04-19 Lothar Waßmannkaro: tx6: add support for TX6Q-8037 (i.MX6QP)
2016-04-19 Lothar Waßmannkaro: tx6: add support for boards with >= 2GiB memory
2016-04-19 Lothar Waßmannkaro: tx6: disable gpmi clk before changing podf and...
2016-04-19 Lothar Waßmannkaro: tx6: replace open coded interpretation of cpurev...
2016-04-18 Lothar Waßmannkaro: tx6: set LCD x, y dimensions to 0 when disabling LCD
2016-04-13 Lothar Waßmannrename TX6Q-1033 to TX6Q-1036
2016-03-24 Lothar Waßmannkaro: tx28: remove obsolete u-boot.bd
2016-02-18 Lothar WaßmannMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
2016-02-18 Lothar WaßmannMerge branch 'tx28-update-2016-02-03' into karo-tx6
2016-02-18 Lothar WaßmannMerge branch 'tx6-update-2016-02-03' into karo-tx6
2016-02-18 Lothar Waßmannkaro: tx6ul: fix bogus GPIO numbers
2016-02-18 Lothar Waßmannkaro: tx6ul: add pad settings for FT5x06 and USB pads...
2016-02-18 Lothar Waßmannkaro: tx6ul: add support for TX6UL Mainboard (v1)
2016-02-18 Lothar Waßmannkaro: tx6ul: defer mmc probing until environment has...
2016-02-18 Lothar Waßmannkaro: tx6ul: proper initialize second FEC if available
2016-02-18 Lothar Waßmannkaro: tx6ul: reorder functions to better follow which...
2016-02-18 Lothar Waßmannkaro: tx6: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx53: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx53: don't return non-zero return value in board...
2016-02-18 Lothar Waßmannkaro: tx6ul: make show_activity() bail out on GPIO...
2016-02-18 Lothar Waßmannkaro: tx6ul: indentation fixes
2016-02-18 Lothar Waßmannkaro: tx6: don't write u-boot image with WITH_DROP_FFS
2016-02-18 Lothar Waßmannkaro: tx53: don't write u-boot image with WITH_DROP_FFS
2016-02-11 Lothar Waßmannkaro: tx28: fix prototype of video_hw_init()
2016-02-11 Lothar Waßmannkaro: tx28: check ctrlc before returning error code...
2016-02-11 Lothar Waßmannkaro: tx28: don't return non-zero return value in board...
2016-02-11 Lothar Waßmannkaro: tx28: don't write u-boot image with WITH_DROP_FFS
2016-02-04 Lothar Waßmannkaro: tx6ul: fix ENET2_TX_CLK pad settings
2016-02-04 Lothar Waßmannkaro: remove redundant cmap entry in panel_info
2015-11-26 Lothar Waßmannkaro: tx6ul: set VIDEO_PLL to 648MHz by default karo-tx6 KARO-TX6UL-2015-11-30
2015-11-26 Lothar Waßmannkaro: tx6ul: fix ENFC_CLK_SEL bitmask
2015-11-26 Lothar WaßmannARM: imx6ul: add support for mxsfb on i.MX6UL
2015-11-26 Lothar Waßmannkaro: tx6: rework PMIC code to allow for different...
2015-11-26 Lothar Waßmannkaro: tx6ul: enable soft_i2c for PMIC access
2015-11-26 Lothar Waßmannkaro: tx6ul: fix max. dimensions of framebuffer
2015-11-16 Lothar Waßmannkaro: tx6: remove secure_boot fuse override which is...
2015-10-26 Lothar WaßmannMerge branch 'tx48-devel' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx28-devel' into karo-devel
2015-10-26 Lothar Waßmannkaro: tx28: Kconfig: select CMD_ROMUPDATE for TX28...
2015-10-26 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-devel
2015-10-26 Lothar Waßmannkaro: tx48: fix build error "undefined reference to...
2015-10-26 Lothar Waßmannkaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
2015-10-22 Lothar Waßmannkaro: tx6: adapt romupdate command for i.MX6UL
next