From 5a0afc32fab4aeb21fb95ecd49a39b33d05f999d Mon Sep 17 00:00:00 2001 From: =?utf8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 24 Mar 2016 12:01:02 +0100 Subject: [PATCH 1/1] mxs: spl: remove duplicate debug messages --- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index daae30c451..561c04db27 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -324,8 +324,6 @@ static void mxs_src_power_init(void) { debug("SPL: Pre-Configuring power block\n"); - debug("SPL: Pre-Configuring power block\n"); - /* Improve efficieny and reduce transient ripple */ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set); @@ -370,8 +368,6 @@ static void mxs_power_init_4p2_params(void) { debug("SPL: Configuring common 4P2 regulator params\n"); - debug("SPL: Configuring common 4P2 regulator params\n"); - /* Setup 4P2 parameters */ clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK, @@ -596,8 +592,6 @@ static void mxs_power_init_dcdc_4p2_source(void) { debug("SPL: Switching DC-DC converters to 4P2\n"); - debug("SPL: Switching DC-DC converters to 4P2\n"); - if (!(readl(&power_regs->hw_power_dcdc4p2) & POWER_DCDC4P2_ENABLE_DCDC)) { debug("SPL: Already switched - aborting\n"); @@ -695,8 +689,6 @@ static void mxs_boot_valid_5v(void) { debug("SPL: Booting from 5V supply\n"); - debug("SPL: Booting from 5V supply\n"); - /* * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V * disconnect event. FIXME @@ -739,8 +731,6 @@ static void mxs_batt_boot(void) { debug("SPL: Configuring power block to boot from battery\n"); - debug("SPL: Configuring power block to boot from battery\n"); - clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); @@ -844,8 +834,6 @@ static void mxs_5v_boot(void) { debug("SPL: Configuring power block to boot from 5V input\n"); - debug("SPL: Configuring power block to boot from 5V input\n"); - /* * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, * but their implementation always returns 1 so we omit it here. @@ -907,8 +895,6 @@ static void mxs_init_batt_bo(void) { debug("SPL: Initialising battery brown-out level to 3.0V\n"); - debug("SPL: Initialising battery brown-out level to 3.0V\n"); - /* Brownout at 3V */ clrsetbits_le32(&power_regs->hw_power_battmonitor, POWER_BATTMONITOR_BRWNOUT_LVL_MASK, @@ -928,8 +914,6 @@ static void mxs_switch_vddd_to_dcdc_source(void) { debug("SPL: Switching VDDD to DC-DC converters\n"); - debug("SPL: Switching VDDD to DC-DC converters\n"); - clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); @@ -1011,8 +995,6 @@ static void mxs_enable_output_rail_protection(void) { debug("SPL: Enabling output rail protection\n"); - debug("SPL: Enabling output rail protection\n"); - writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); @@ -1353,8 +1335,6 @@ void mxs_power_init(void) { debug("SPL: Initialising Power Block\n"); - debug("SPL: Initialising Power Block\n"); - mxs_ungate_power(); mxs_power_clock2xtal(); -- 2.39.2