]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2016-06-30 Lothar Waßmannkaro: tx28: enable activity led only on stk5-v3 baseboard
2016-06-30 Lothar Waßmannkaro: tx28: enable U-Boot build with different (or...
2016-06-30 Lothar Waßmannkaro: tx28: explicitly configure pad config (voltage...
2016-06-30 Lothar Waßmannkaro: tx28: remove LCD pad configuration from SPL
2016-06-30 Lothar Waßmannmxs: spl: print the actual battery brownout level rathe...
2016-06-30 Lothar Waßmannmxs: spl: adjust delay after setting CLKCTRL_PLL0CTRL0_...
2016-06-30 Lothar Waßmannmxs: spl: use writel() to Set/Clear registers rather...
2016-06-30 Lothar Waßmannmxs: spl: replace bogus early_delay() function with...
2016-06-30 Lothar WaßmannARM: MXS: use 'struct mxs_digctl_regs' to access MXS_HW...
2016-06-13 Lothar WaßmannMerge branch 'tx28-update' into tx28-bugfix
2016-04-26 Lothar Waßmannkaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
2016-04-26 Lothar Waßmannkaro: tx6ul: make board string dependent on cpurev
2016-04-26 Lothar Waßmannmx6: clock: use setup_gpmi_io_clk() to change nfc clk...
2016-04-26 Lothar Waßmannmx6: clock: fix integer overflow in calculation of...
2016-04-26 Lothar Waßmannmx6: ocotp: add timeout to busy wait loop
2016-04-26 Lothar Waßmannkaro: tx6: pmic: print PMIC name in boot messages
2016-04-19 Lothar Waßmannarm: mx6: fix NFC clock get/set routines for i.MX6QP... tx6qp-devel
2016-04-19 Lothar Waßmannkaro: tx6: add support for TX6Q-8037 (i.MX6QP)
2016-04-19 Lothar Waßmannkaro: tx6: add support for boards with >= 2GiB memory
2016-04-19 Lothar Waßmannkaro: tx6: disable gpmi clk before changing podf and...
2016-04-19 Lothar Waßmannkaro: tx6: replace open coded interpretation of cpurev...
2016-04-18 Lothar Waßmannkaro: tx6: set LCD x, y dimensions to 0 when disabling LCD
2016-04-18 Lothar Waßmannkaro: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_C...
2016-04-13 Lothar Waßmannmx6: clock: take 'num' and 'denom' regs into account...
2016-04-13 Lothar Waßmannnet: fec: use correct sizes to clear and flush descriptors
2016-04-13 Lothar Waßmannrename TX6Q-1033 to TX6Q-1036
2016-03-24 Lothar Waßmannkaro: tx28: supply a valid stack pointer to early SPL...
2016-03-24 Lothar Waßmannkaro: tx28: remove obsolete u-boot.bd
2016-03-24 Lothar Waßmannmxs: spl: remove duplicate debug messages
2016-03-24 Lothar Waßmannkaro: tx6: remove redundant #ifndef CONFIG_TX6_UBOOT_MFG
2016-02-18 Lothar WaßmannMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
2016-02-18 Lothar WaßmannMerge branch 'tx28-update-2016-02-03' into karo-tx6
2016-02-18 Lothar WaßmannMerge branch 'tx6-update-2016-02-03' into karo-tx6
2016-02-18 Lothar Waßmannkaro: tx6ul: fix bogus GPIO numbers
2016-02-18 Lothar Waßmannkaro: tx6ul: add pad settings for FT5x06 and USB pads...
2016-02-18 Lothar Waßmannkaro: tx6ul: add support for TX6UL Mainboard (v1)
2016-02-18 Lothar Waßmannkaro: tx6ul: defer mmc probing until environment has...
2016-02-18 Lothar Waßmannkaro: tx6ul: proper initialize second FEC if available
2016-02-18 Lothar Waßmannkaro: tx6ul: reorder functions to better follow which...
2016-02-18 Lothar Waßmannkaro: tx6: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx53: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx53: don't return non-zero return value in board...
2016-02-18 Lothar Waßmannkaro: tx6ul: make show_activity() bail out on GPIO...
2016-02-18 Lothar Waßmannkaro: tx6ul: indentation fixes
2016-02-18 Lothar Waßmannkaro: tx6: don't write u-boot image with WITH_DROP_FFS
2016-02-18 Lothar Waßmannkaro: tx53: don't write u-boot image with WITH_DROP_FFS
2016-02-11 Lothar Waßmannkaro: tx28: set CONFIG_ENV_OVERWRITE also for NAND...
2016-02-11 Lothar Waßmannkaro: tx28: fix prototype of video_hw_init()
2016-02-11 Lothar Waßmannkaro: tx28: check ctrlc before returning error code...
2016-02-11 Lothar Waßmannkaro: tx28: don't return non-zero return value in board...
2016-02-11 Lothar Waßmannkaro: tx28: don't write u-boot image with WITH_DROP_FFS
2016-02-04 Lothar Waßmannkaro: tx6ul: fix ENET2_TX_CLK pad settings
2016-02-04 Lothar Waßmannkaro: remove redundant cmap entry in panel_info
2016-02-04 Lothar Waßmannnet: fec_mxc: exempt already found PHYs from being...
2016-02-04 Lothar Waßmannnet: fec_mxc: make base_mii configurable
2016-02-04 Lothar Waßmannlcd: properly display bitmaps > 8bpp
2016-02-04 Lothar Waßmannlcd: support corner cases for splashpos
2016-02-03 Lothar Waßmannlcd: fix integer overflow in calculation of number...
2016-02-03 Lothar Waßmannlcd: fix typo CONFIG_BMP_24BMP -> CONFIG_BMP_24BPP
2015-11-26 Lothar Waßmannkaro: tx6ul: set VIDEO_PLL to 648MHz by default karo-tx6 KARO-TX6UL-2015-11-30
2015-11-26 Lothar Waßmannkaro: tx6ul: fix ENFC_CLK_SEL bitmask
2015-11-26 Lothar WaßmannARM: imx6ul: add support for mxsfb on i.MX6UL
2015-11-26 Lothar WaßmannARM: imx6: clocks: add support for eLCDIF clock on...
2015-11-26 Lothar WaßmannARM: imx6: clocks: remove function local definitions...
2015-11-26 Lothar Waßmannimx6: rename ANADIG_PLL_AUDIO_TEST_DIV to ANADIG_PLL_AU...
2015-11-26 Lothar Waßmannkaro: tx6: enable CONFIG_BMP_*BPP to make splashscreen...
2015-11-26 Lothar Waßmannkaro: tx6: rework PMIC code to allow for different...
2015-11-26 Lothar Waßmannkaro: tx6ul: enable soft_i2c for PMIC access
2015-11-26 Lothar Waßmannkaro: tx6: set TX6_REV=0x1 where appropriate to elimina...
2015-11-26 Lothar Waßmannkaro: tx6ul: fix max. dimensions of framebuffer
2015-11-16 Lothar Waßmannkaro: tx6: disable LCD in '_noenv' config
2015-11-16 Lothar Waßmannkaro: tx6: remove secure_boot fuse override which is...
2015-10-26 Lothar WaßmannMerge branch 'tx48-devel' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx28-devel' into karo-devel
2015-10-26 Lothar Waßmannkaro: tx28: Kconfig: select CMD_ROMUPDATE for TX28...
2015-10-26 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-devel
2015-10-26 Lothar Waßmanntools: elftosb: use g++ to compile elftosb to prevent...
2015-10-26 Lothar Waßmanntools: elftosb: makefile indentation and whitespace...
2015-10-26 Lothar Waßmannkaro: tx48: fix build error "undefined reference to...
2015-10-26 Lothar Waßmannkaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
2015-10-23 Lothar Waßmannvideo: ipu: initialize g_ipu_clk, g_ldb_clk statically KARO-TX6UL-2015-10-23
2015-10-22 Lothar Waßmannarm: mx6: fix the AIPS?_BASE_ADDR fsckup introduced...
2015-10-22 Lothar Waßmannkaro: tx6: adapt romupdate command for i.MX6UL
2015-10-22 Lothar Waßmannkaro: tx6: remove unused code from flash.c
2015-10-22 Lothar Waßmannnand: mxs: convey return code from failed function...
2015-10-22 Lothar Waßmannnand: mxs: make fake_ecc_layout static
2015-10-22 Lothar Waßmannnand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q
2015-10-20 Lothar Waßmannkaro: tx6ul: disable PMIC init
2015-10-20 Lothar Waßmannkaro: tx6: change DGCTRL init values depending on SoC...
2015-10-20 Lothar Waßmannkaro: tx6: add TXUL support
2015-10-19 Lothar Waßmannkaro: tx6: selectively set individual CCGR bits via DCD
2015-10-19 Lothar Waßmannkaro: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_...
2015-10-19 Lothar Waßmannkaro: tx6: config.mk cleanup
2015-10-19 Lothar Waßmannkaro: tx6: further cleanups
2015-10-19 Lothar Waßmannarm: mx6: use imx6_thermal driver
2015-10-19 Lothar Waßmannarm: mx6: use fuse_read() for OCOTP fuse access
2015-10-12 Lothar Waßmannarm: mxs: ocotp: disable OCOTP clock after access is...
2015-10-12 Lothar Waßmannremove obsolete functions ocotp_clk_{en,dis}able
2015-10-12 Lothar Waßmannkconfig: arm: remove duplicate definitions of SOC_MX*
next