]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
PPC4xx:HCU4/5 cleanup
authorNiklaus Giger <niklaus.giger@netstal.com>
Thu, 16 Aug 2007 13:16:03 +0000 (15:16 +0200)
committerStefan Roese <sr@denx.de>
Thu, 16 Aug 2007 17:44:54 +0000 (19:44 +0200)
Minor cleanups to confirm to the u-boot coding style.
Some german expressions -> english.
HCU5 enforces a unique IP adress for a given slot in the rack.

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
board/netstal/hcu4/hcu4.c
board/netstal/hcu5/hcu5.c

index 2b9560484d7257bab8326998555d70a0164d74aa..48a3f13bad75dcbe1c88491f6ae57d35d208635f 100644 (file)
@@ -43,7 +43,7 @@ enum {
        HW_GENERATION_MCU25 = 0x09,
 };
 
-void sysLedSet(u32 value);
+void hcu_led_set(u32 value);
 long int spd_sdram(int(read_spd)(uint addr));
 
 #ifdef CONFIG_SPD_EEPROM
@@ -121,22 +121,24 @@ int checkboard (void)
                printf ("HCU3: index %d\n\n", index);
        else if (generation == HW_GENERATION_HCU4)
                printf ("HCU4: index %d\n\n", index);
-       /* GPIO here noch nicht richtig initialisert !!! */
-       sysLedSet(0);
+       hcu_led_set(0);
        for (j = 0; j < 7; j++) {
-               sysLedSet(1 << j);
+               hcu_led_set(1 << j);
                udelay(50 * 1000);
        }
 
        return 0;
 }
 
-u32 sysLedGet(void)
+u32 hcu_led_get(void)
 {
        return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
 }
 
-void sysLedSet(u32 value /* value to place in LEDs */)
+/*---------------------------------------------------------------------------+
+ * hcu_led_set  value to be placed into the LEDs (max 6 bit)
+ *---------------------------------------------------------------------------*/
+void hcu_led_set(u32 value)
 {
        u32   tmp = ~value;
        u32   *ledReg;
@@ -243,9 +245,9 @@ long int fixed_hcu4_sdram (int board_type)
 }
 
 /*---------------------------------------------------------------------------+
- * getSerialNr
+ * hcu_serial_number
  *---------------------------------------------------------------------------*/
-static u32 getSerialNr(void)
+static u32 hcu_serial_number(void)
 {
        u32 *serial = (u32 *)CFG_FLASH_BASE;
 
@@ -265,7 +267,7 @@ int misc_init_r(void)
        char *s = getenv("ethaddr");
        char *e;
        int i;
-       u32 serial = getSerialNr();
+       u32 serial = hcu_serial_number();
 
        for (i = 0; i < 6; ++i) {
                gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
index 23df0814ff52dff7b227c9d7636fb37b61383611..b9b10fdc29accc5b808eabc0b34c52ecb96447bf 100644 (file)
 #include <asm/processor.h>
 #include <ppc440.h>
 #include <asm/mmu.h>
+#include <net.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void sysLedSet(u32 value);
+void hcu_led_set(u32 value);
 
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
@@ -41,7 +42,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define SDR0_ECID2             0x0082
 #define SDR0_ECID3             0x0083
 
-#define SYS_IO_ADDRESS         0xcce00000
+#define SYS_IO_ADDRESS         (CFG_CS_2 + 0x00e00000)
+#define SYS_SLOT_ADDRESS               (CFG_CPLD + 0x00400000)
 
 #define DEFAULT_ETH_ADDR  "ethaddr"
 /* ethaddr for first or etha1ddr for second ethernet */
@@ -182,11 +184,14 @@ int board_early_init_f(void)
        return 0;
 }
 
+#ifdef CONFIG_BOARD_PRE_INIT
 int board_pre_init(void)
 {
        return board_early_init_f();
 }
 
+#endif
+
 int checkboard(void)
 {
        unsigned int j;
@@ -211,37 +216,50 @@ int checkboard(void)
 
        printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3);
        for (j = 0;j < 6; j++) {
-               sysLedSet(1 << j);
+               hcu_led_set(1 << j);
                udelay(200 * 1000);
        }
 
        return 0;
 }
 
-u32 sysLedGet(void)
+u32 hcu_led_get(void)
 {
        return in16(SYS_IO_ADDRESS) & 0x3f;
 }
 
-void sysLedSet(u32 value /* value to place in LEDs */)
+/*---------------------------------------------------------------------------+
+ * hcu_led_set  value to be placed into the LEDs (max 6 bit)
+ *---------------------------------------------------------------------------*/
+void hcu_led_set(u32 value)
 {
        out16(SYS_IO_ADDRESS, value);
 }
 
 /*---------------------------------------------------------------------------+
- * getSerialNr
+ * get_serial_number
  *---------------------------------------------------------------------------*/
-static u32 getSerialNr(void)
+static u32 get_serial_number(void)
 {
        u32 *serial = (u32 *)CFG_FLASH_BASE;
 
        if (*serial == 0xffffffff)
-               return get_ticks();
+               return 0;
 
        return *serial;
 }
 
 
+/*---------------------------------------------------------------------------+
+ * hcu_get_slot
+ *---------------------------------------------------------------------------*/
+u32 hcu_get_slot(void)
+{
+       u16 *slot = (u16 *)SYS_SLOT_ADDRESS;
+       return (*slot) & 0x7f;
+}
+
+
 /*---------------------------------------------------------------------------+
  * misc_init_r.
  *---------------------------------------------------------------------------*/
@@ -250,7 +268,7 @@ int misc_init_r(void)
        char *s = getenv(DEFAULT_ETH_ADDR);
        char *e;
        int i;
-       u32 serial = getSerialNr();
+       u32 serial = get_serial_number();
        unsigned long usb2d0cr = 0;
        unsigned long usb2phy0cr, usb2h0cr = 0;
        unsigned long sdr0_pfc1;
@@ -272,8 +290,7 @@ int misc_init_r(void)
                gd->bd->bi_enetaddr[2] = 0x13;
                gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
                gd->bd->bi_enetaddr[4] = (serial >>  8) & 0xff;
-               /* byte[5].bit 0 must be zero */
-               gd->bd->bi_enetaddr[5] = (serial >>  0) & 0xfe;
+               gd->bd->bi_enetaddr[5] = hcu_get_slot();
                sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
                        gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
                        gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
@@ -283,6 +300,25 @@ int misc_init_r(void)
                setenv(DEFAULT_ETH_ADDR, ethaddr);
        }
 
+       /* IP-Adress update */
+       {
+               IPaddr_t ipaddr;
+               char *ipstring;
+
+               ipstring = getenv("ipaddr");
+               if (ipstring == 0)
+                       ipaddr = string_to_ip("172.25.1.99");
+               else
+                       ipaddr = string_to_ip(ipstring);
+               if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
+                       char tmp[22];
+
+                       ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
+                       ip_to_string (ipaddr, tmp);
+                       printf("%s: enforce %s\n",  __FUNCTION__, tmp);
+                       setenv("ipaddr", tmp);
+               }
+       }
 #ifdef CFG_ENV_IS_IN_FLASH
        /* Monitor protection ON by default */
        (void)flash_protect(FLAG_PROTECT_SET,
@@ -346,6 +382,7 @@ int misc_init_r(void)
        return 0;
 }
 
+#if defined(CONFIG_PCI)
 /*************************************************************************
  *  pci_pre_init
  *
@@ -358,7 +395,6 @@ int misc_init_r(void)
  *     certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
        unsigned long addr;
@@ -411,7 +447,6 @@ int pci_pre_init(struct pci_controller *hose)
 
        return 1;
 }
-#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init
@@ -421,7 +456,6 @@ int pci_pre_init(struct pci_controller *hose)
  *     may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
        /*-------------------------------------------------------------+
@@ -478,13 +512,11 @@ void pci_target_init(struct pci_controller *hose)
 
        pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
        unsigned short temp_short;
@@ -499,8 +531,6 @@ void pci_master_init(struct pci_controller *hose)
                              temp_short | PCI_COMMAND_MASTER |
                              PCI_COMMAND_MEMORY);
 }
-#endif
-/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -517,9 +547,8 @@ void pci_master_init(struct pci_controller *hose)
  *
  *
  ************************************************************************/
-#if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
        return 1;
 }
-#endif                         /* defined(CONFIG_PCI) */
+#endif  /* defined(CONFIG_PCI) */