arch/arm/boot/dts/spear1310.dtsi

   1 /*
   2  * DTS file for all SPEAr1310 SoCs
   3  *
   4  * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /include/ "spear13xx.dtsi"
  15
  16 / {
  17         compatible = "st,spear1310";
  18
  19         ahb {
  20                 spics: spics@e0700000{
  21                         compatible = "st,spear-spics-gpio";
  22                         reg = <0xe0700000 0x1000>;
  23                         st-spics,peripcfg-reg = <0x3b0>;
  24                         st-spics,sw-enable-bit = <12>;
  25                         st-spics,cs-value-bit = <11>;
  26                         st-spics,cs-enable-mask = <3>;
  27                         st-spics,cs-enable-shift = <8>;
  28                         gpio-controller;
  29                         #gpio-cells = <2>;
  30                 };
  31
  32                 ahci@b1000000 {
  33                         compatible = "snps,spear-ahci";
  34                         reg = <0xb1000000 0x10000>;
  35                         interrupts = <0 68 0x4>;
  36                         status = "disabled";
  37                 };
  38
  39                 ahci@b1800000 {
  40                         compatible = "snps,spear-ahci";
  41                         reg = <0xb1800000 0x10000>;
  42                         interrupts = <0 69 0x4>;
  43                         status = "disabled";
  44                 };
  45
  46                 ahci@b4000000 {
  47                         compatible = "snps,spear-ahci";
  48                         reg = <0xb4000000 0x10000>;
  49                         interrupts = <0 70 0x4>;
  50                         status = "disabled";
  51                 };
  52
  53                 gmac1: eth@5c400000 {
  54                         compatible = "st,spear600-gmac";
  55                         reg = <0x5c400000 0x8000>;
  56                         interrupts = <0 95 0x4>;
  57                         interrupt-names = "macirq";
  58                         phy-mode = "mii";
  59                         status = "disabled";
  60                 };
  61
  62                 gmac2: eth@5c500000 {
  63                         compatible = "st,spear600-gmac";
  64                         reg = <0x5c500000 0x8000>;
  65                         interrupts = <0 96 0x4>;
  66                         interrupt-names = "macirq";
  67                         phy-mode = "mii";
  68                         status = "disabled";
  69                 };
  70
  71                 gmac3: eth@5c600000 {
  72                         compatible = "st,spear600-gmac";
  73                         reg = <0x5c600000 0x8000>;
  74                         interrupts = <0 97 0x4>;
  75                         interrupt-names = "macirq";
  76                         phy-mode = "rmii";
  77                         status = "disabled";
  78                 };
  79
  80                 gmac4: eth@5c700000 {
  81                         compatible = "st,spear600-gmac";
  82                         reg = <0x5c700000 0x8000>;
  83                         interrupts = <0 98 0x4>;
  84                         interrupt-names = "macirq";
  85                         phy-mode = "rgmii";
  86                         status = "disabled";
  87                 };
  88
  89                 pinmux: pinmux@e0700000 {
  90                         compatible = "st,spear1310-pinmux";
  91                         reg = <0xe0700000 0x1000>;
  92                         #gpio-range-cells = <3>;
  93                 };
  94
  95                 apb {
  96                         i2c1: i2c@5cd00000 {
  97                                 #address-cells = <1>;
  98                                 #size-cells = <0>;
  99                                 compatible = "snps,designware-i2c";
 100                                 reg = <0x5cd00000 0x1000>;
 101                                 interrupts = <0 87 0x4>;
 102                                 status = "disabled";
 103                         };
 104
 105                         i2c2: i2c@5ce00000 {
 106                                 #address-cells = <1>;
 107                                 #size-cells = <0>;
 108                                 compatible = "snps,designware-i2c";
 109                                 reg = <0x5ce00000 0x1000>;
 110                                 interrupts = <0 88 0x4>;
 111                                 status = "disabled";
 112                         };
 113
 114                         i2c3: i2c@5cf00000 {
 115                                 #address-cells = <1>;
 116                                 #size-cells = <0>;
 117                                 compatible = "snps,designware-i2c";
 118                                 reg = <0x5cf00000 0x1000>;
 119                                 interrupts = <0 89 0x4>;
 120                                 status = "disabled";
 121                         };
 122
 123                         i2c4: i2c@5d000000 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                                 compatible = "snps,designware-i2c";
 127                                 reg = <0x5d000000 0x1000>;
 128                                 interrupts = <0 90 0x4>;
 129                                 status = "disabled";
 130                         };
 131
 132                         i2c5: i2c@5d100000 {
 133                                 #address-cells = <1>;
 134                                 #size-cells = <0>;
 135                                 compatible = "snps,designware-i2c";
 136                                 reg = <0x5d100000 0x1000>;
 137                                 interrupts = <0 91 0x4>;
 138                                 status = "disabled";
 139                         };
 140
 141                         i2c6: i2c@5d200000 {
 142                                 #address-cells = <1>;
 143                                 #size-cells = <0>;
 144                                 compatible = "snps,designware-i2c";
 145                                 reg = <0x5d200000 0x1000>;
 146                                 interrupts = <0 92 0x4>;
 147                                 status = "disabled";
 148                         };
 149
 150                         i2c7: i2c@5d300000 {
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                                 compatible = "snps,designware-i2c";
 154                                 reg = <0x5d300000 0x1000>;
 155                                 interrupts = <0 93 0x4>;
 156                                 status = "disabled";
 157                         };
 158
 159                         spi1: spi@5d400000 {
 160                                 compatible = "arm,pl022", "arm,primecell";
 161                                 reg = <0x5d400000 0x1000>;
 162                                 interrupts = <0 99 0x4>;
 163                                 #address-cells = <1>;
 164                                 #size-cells = <0>;
 165                                 status = "disabled";
 166                         };
 167
 168                         serial@5c800000 {
 169                                 compatible = "arm,pl011", "arm,primecell";
 170                                 reg = <0x5c800000 0x1000>;
 171                                 interrupts = <0 82 0x4>;
 172                                 status = "disabled";
 173                         };
 174
 175                         serial@5c900000 {
 176                                 compatible = "arm,pl011", "arm,primecell";
 177                                 reg = <0x5c900000 0x1000>;
 178                                 interrupts = <0 83 0x4>;
 179                                 status = "disabled";
 180                         };
 181
 182                         serial@5ca00000 {
 183                                 compatible = "arm,pl011", "arm,primecell";
 184                                 reg = <0x5ca00000 0x1000>;
 185                                 interrupts = <0 84 0x4>;
 186                                 status = "disabled";
 187                         };
 188
 189                         serial@5cb00000 {
 190                                 compatible = "arm,pl011", "arm,primecell";
 191                                 reg = <0x5cb00000 0x1000>;
 192                                 interrupts = <0 85 0x4>;
 193                                 status = "disabled";
 194                         };
 195
 196                         serial@5cc00000 {
 197                                 compatible = "arm,pl011", "arm,primecell";
 198                                 reg = <0x5cc00000 0x1000>;
 199                                 interrupts = <0 86 0x4>;
 200                                 status = "disabled";
 201                         };
 202
 203                         thermal@e07008c4 {
 204                                 st,thermal-flags = <0x7000>;
 205                         };
 206
 207                         gpiopinctrl: gpio@d8400000 {
 208                                 compatible = "st,spear-plgpio";
 209                                 reg = <0xd8400000 0x1000>;
 210                                 interrupts = <0 100 0x4>;
 211                                 #interrupt-cells = <1>;
 212                                 interrupt-controller;
 213                                 gpio-controller;
 214                                 #gpio-cells = <2>;
 215                                 gpio-ranges = <&pinmux 0 0 246>;
 216                                 status = "disabled";
 217
 218                                 st-plgpio,ngpio = <246>;
 219                                 st-plgpio,enb-reg = <0xd0>;
 220                                 st-plgpio,wdata-reg = <0x90>;
 221                                 st-plgpio,dir-reg = <0xb0>;
 222                                 st-plgpio,ie-reg = <0x30>;
 223                                 st-plgpio,rdata-reg = <0x70>;
 224                                 st-plgpio,mis-reg = <0x10>;
 225                                 st-plgpio,eit-reg = <0x50>;
 226                         };
 227                 };
 228         };
 229 };